libata: move 'struct ata_taskfile' and friends from ata.h to libata.h

Move 'struct ata_taskfile', ata_prot_flags() and their friends from
<linux/ata.h> to <linux/libata.h>. They were misplaced from the beginning,  as
<linux/ata.h> should cover ATA/ATAPI and related standards only -- to which the
aforementioned structure and function have only remote relation.

I would have moved 'enum ata_tf_protocols' closely related to 'struct
ata_taskfile' but it unfortunately gets used by 'drivers/ide/ide-ioctls.c'...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

1 files changed, 0 insertions, 102 deletions

diff --git a/include/linux/ata.h b/include/linux/ata.h
index ee0bd952405..f63fb1afc5c 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -446,22 +446,6 @@ enum {
 	SERR_TRANS_ST_ERROR	= (1 << 24), /* Transport state trans. error */
 	SERR_UNRECOG_FIS	= (1 << 25), /* Unrecognized FIS */
 	SERR_DEV_XCHG		= (1 << 26), /* device exchanged */
-
-	/* struct ata_taskfile flags */
-	ATA_TFLAG_LBA48		= (1 << 0), /* enable 48-bit LBA and "HOB" */
-	ATA_TFLAG_ISADDR	= (1 << 1), /* enable r/w to nsect/lba regs */
-	ATA_TFLAG_DEVICE	= (1 << 2), /* enable r/w to device reg */
-	ATA_TFLAG_WRITE		= (1 << 3), /* data dir: host->dev==1 (write) */
-	ATA_TFLAG_LBA		= (1 << 4), /* enable LBA */
-	ATA_TFLAG_FUA		= (1 << 5), /* enable FUA */
-	ATA_TFLAG_POLLING	= (1 << 6), /* set nIEN to 1 and use polling */
-
-	/* protocol flags */
-	ATA_PROT_FLAG_PIO	= (1 << 0), /* is PIO */
-	ATA_PROT_FLAG_DMA	= (1 << 1), /* is DMA */
-	ATA_PROT_FLAG_DATA	= ATA_PROT_FLAG_PIO | ATA_PROT_FLAG_DMA,
-	ATA_PROT_FLAG_NCQ	= (1 << 2), /* is NCQ */
-	ATA_PROT_FLAG_ATAPI	= (1 << 3), /* is ATAPI */
 };
 
 enum ata_tf_protocols {
@@ -488,83 +472,6 @@ struct ata_bmdma_prd {
 	__le32			flags_len;
 };
 
-struct ata_taskfile {
-	unsigned long		flags;		/* ATA_TFLAG_xxx */
-	u8			protocol;	/* ATA_PROT_xxx */
-
-	u8			ctl;		/* control reg */
-
-	u8			hob_feature;	/* additional data */
-	u8			hob_nsect;	/* to support LBA48 */
-	u8			hob_lbal;
-	u8			hob_lbam;
-	u8			hob_lbah;
-
-	u8			feature;
-	u8			nsect;
-	u8			lbal;
-	u8			lbam;
-	u8			lbah;
-
-	u8			device;
-
-	u8			command;	/* IO operation */
-};
-
-/*
- * protocol tests
- */
-static inline unsigned int ata_prot_flags(u8 prot)
-{
-	switch (prot) {
-	case ATA_PROT_NODATA:
-		return 0;
-	case ATA_PROT_PIO:
-		return ATA_PROT_FLAG_PIO;
-	case ATA_PROT_DMA:
-		return ATA_PROT_FLAG_DMA;
-	case ATA_PROT_NCQ:
-		return ATA_PROT_FLAG_DMA | ATA_PROT_FLAG_NCQ;
-	case ATAPI_PROT_NODATA:
-		return ATA_PROT_FLAG_ATAPI;
-	case ATAPI_PROT_PIO:
-		return ATA_PROT_FLAG_ATAPI | ATA_PROT_FLAG_PIO;
-	case ATAPI_PROT_DMA:
-		return ATA_PROT_FLAG_ATAPI | ATA_PROT_FLAG_DMA;
-	}
-	return 0;
-}
-
-static inline int ata_is_atapi(u8 prot)
-{
-	return ata_prot_flags(prot) & ATA_PROT_FLAG_ATAPI;
-}
-
-static inline int ata_is_nodata(u8 prot)
-{
-	return !(ata_prot_flags(prot) & ATA_PROT_FLAG_DATA);
-}
-
-static inline int ata_is_pio(u8 prot)
-{
-	return ata_prot_flags(prot) & ATA_PROT_FLAG_PIO;
-}
-
-static inline int ata_is_dma(u8 prot)
-{
-	return ata_prot_flags(prot) & ATA_PROT_FLAG_DMA;
-}
-
-static inline int ata_is_ncq(u8 prot)
-{
-	return ata_prot_flags(prot) & ATA_PROT_FLAG_NCQ;
-}
-
-static inline int ata_is_data(u8 prot)
-{
-	return ata_prot_flags(prot) & ATA_PROT_FLAG_DATA;
-}
-
 /*
  * id tests
  */
@@ -1060,15 +967,6 @@ static inline unsigned ata_set_lba_range_entries(void *_buffer,
 	return used_bytes;
 }
 
-static inline int is_multi_taskfile(struct ata_taskfile *tf)
-{
-	return (tf->command == ATA_CMD_READ_MULTI) ||
-	       (tf->command == ATA_CMD_WRITE_MULTI) ||
-	       (tf->command == ATA_CMD_READ_MULTI_EXT) ||
-	       (tf->command == ATA_CMD_WRITE_MULTI_EXT) ||
-	       (tf->command == ATA_CMD_WRITE_MULTI_FUA_EXT);
-}
-
 static inline bool ata_ok(u8 status)
 {
 	return ((status & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ | ATA_ERR))