[POWERPC] Add QUICC Engine (QE) infrastructure

Add QUICC Engine (QE) configuration, header files, and
QE management and library code that are used by QE devices
drivers.

Includes Leo's modifications up to, and including, the
platform_device to of_device adaptation:

"The series of patches add generic QE infrastructure called
qe_lib, and MPC8360EMDS board support.  Qe_lib is used by
QE device drivers such as ucc_geth driver.

This version updates QE interrupt controller to use new irq
mapping mechanism, addresses all the comments received with
last submission and includes some style fixes.

v2: Change to use device tree for BCSR and MURAM;
Remove I/O port interrupt handling code as it is not generic
enough.

v3: Address comments from Kumar;  Update definition of several
device tree nodes;  Copyright style change."

In addition, the following changes have been made:

o removed typedefs
o uint -> u32 conversions
o removed following defines:
  QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER,
  BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET
  because they hid sizeof/in_be32/out_be32 operations from the reader.
o fixed qe_snums_init() serial num assignment to use a const array
o made CONFIG_UCC_FAST select UCC_SLOW
o reduced NR_QE_IC_INTS from 128 to 64
o remove _IO_BASE, etc. defines (not used)
o removed irrelevant comments, added others to resemble removed BD_ defines
o realigned struct definitions in headers
o various other style fixes including things like pinMask -> pin_mask
o fixed a ton of whitespace issues
o marked ioregs as __be32/__be16
o removed platform_device code and redundant get_qe_base()
o removed redundant comments
o added cpu_relax() to qe_reset
o uncasted all get_property() assignments
o eliminated unneeded casts
o eliminated immrbar_phys_to_virt (not used)

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Shlomi Gridish <gridish@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 51 insertions, 14 deletions

diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index 16fbe59edeb..3da29e2d524 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -46,18 +46,17 @@
 
 struct gianfar_platform_data {
 	/* device specific information */
-	u32 device_flags;
-
+	u32	device_flags;
 	/* board specific information */
-	u32 board_flags;
-	u32 bus_id;
-	u32 phy_id;
-	u8 mac_addr[6];
+	u32	board_flags;
+	u32	bus_id;
+	u32	phy_id;
+	u8	mac_addr[6];
 };
 
 struct gianfar_mdio_data {
 	/* board specific information */
-	int irq[32];
+	int	irq[32];
 };
 
 /* Flags related to gianfar device features */
@@ -76,14 +75,13 @@ struct gianfar_mdio_data {
 
 struct fsl_i2c_platform_data {
 	/* device specific information */
-	u32 device_flags;
+	u32	device_flags;
 };
 
 /* Flags related to I2C device features */
 #define FSL_I2C_DEV_SEPARATE_DFSRR	0x00000001
 #define FSL_I2C_DEV_CLOCK_5200		0x00000002
 
-
 enum fsl_usb2_operating_modes {
 	FSL_USB2_MPH_HOST,
 	FSL_USB2_DR_HOST,
@@ -101,9 +99,9 @@ enum fsl_usb2_phy_modes {
 
 struct fsl_usb2_platform_data {
 	/* board specific information */
-	enum fsl_usb2_operating_modes operating_mode;
-	enum fsl_usb2_phy_modes phy_mode;
-	unsigned int port_enables;
+	enum fsl_usb2_operating_modes	operating_mode;
+	enum fsl_usb2_phy_modes		phy_mode;
+	unsigned int			port_enables;
 };
 
 /* Flags in fsl_usb2_mph_platform_data */
@@ -121,5 +119,44 @@ struct fsl_spi_platform_data {
 	u32	sysclk;
 };
 
-#endif				/* _FSL_DEVICE_H_ */
-#endif				/* __KERNEL__ */
+/* Ethernet interface (phy management and speed)
+*/
+enum enet_interface {
+	ENET_10_MII,		/* 10 Base T,   MII interface */
+	ENET_10_RMII,		/* 10 Base T,  RMII interface */
+	ENET_10_RGMII,		/* 10 Base T, RGMII interface */
+	ENET_100_MII,		/* 100 Base T,   MII interface */
+	ENET_100_RMII,		/* 100 Base T,  RMII interface */
+	ENET_100_RGMII,		/* 100 Base T, RGMII interface */
+	ENET_1000_GMII,		/* 1000 Base T,  GMII interface */
+	ENET_1000_RGMII,	/* 1000 Base T, RGMII interface */
+	ENET_1000_TBI,		/* 1000 Base T,   TBI interface */
+	ENET_1000_RTBI		/* 1000 Base T,  RTBI interface */
+};
+
+struct ucc_geth_platform_data {
+	/* device specific information */
+	u32			device_flags;
+	u32			phy_reg_addr;
+
+	/* board specific information */
+	u32			board_flags;
+	u8			rx_clock;
+	u8			tx_clock;
+	u32			phy_id;
+	enum enet_interface	phy_interface;
+	u32			phy_interrupt;
+	u8			mac_addr[6];
+};
+
+/* Flags related to UCC Gigabit Ethernet device features */
+#define FSL_UGETH_DEV_HAS_GIGABIT		0x00000001
+#define FSL_UGETH_DEV_HAS_COALESCE		0x00000002
+#define FSL_UGETH_DEV_HAS_RMON			0x00000004
+
+/* Flags in ucc_geth_platform_data */
+#define FSL_UGETH_BRD_HAS_PHY_INTR		0x00000001
+				/* if not set use a timer */
+
+#endif /* _FSL_DEVICE_H_ */
+#endif /* __KERNEL__ */