hw-breakpoint: Move asm-generic/hw_breakpoint.h to linux/hw_breakpoint.h

We plan to make the breakpoints parameters generic among architectures.
For that it's better to move the asm-generic header to a generic linux
header.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

1 files changed, 136 insertions, 0 deletions

diff --git a/include/linux/hw_breakpoint.h b/include/linux/hw_breakpoint.h
new file mode 100644
index 00000000000..61ccc8f17ea
--- /dev/null
+++ b/include/linux/hw_breakpoint.h
@@ -0,0 +1,136 @@
+#ifndef _LINUX_HW_BREAKPOINT_H
+#define _LINUX_HW_BREAKPOINT_H
+
+
+#ifdef	__KERNEL__
+#include <linux/list.h>
+#include <linux/types.h>
+#include <linux/kallsyms.h>
+
+/**
+ * struct hw_breakpoint - unified kernel/user-space hardware breakpoint
+ * @triggered: callback invoked after target address access
+ * @info: arch-specific breakpoint info (address, length, and type)
+ *
+ * %hw_breakpoint structures are the kernel's way of representing
+ * hardware breakpoints.  These are data breakpoints
+ * (also known as "watchpoints", triggered on data access), and the breakpoint's
+ * target address can be located in either kernel space or user space.
+ *
+ * The breakpoint's address, length, and type are highly
+ * architecture-specific.  The values are encoded in the @info field; you
+ * specify them when registering the breakpoint.  To examine the encoded
+ * values use hw_breakpoint_get_{kaddress,uaddress,len,type}(), declared
+ * below.
+ *
+ * The address is specified as a regular kernel pointer (for kernel-space
+ * breakponts) or as an %__user pointer (for user-space breakpoints).
+ * With register_user_hw_breakpoint(), the address must refer to a
+ * location in user space.  The breakpoint will be active only while the
+ * requested task is running.  Conversely with
+ * register_kernel_hw_breakpoint(), the address must refer to a location
+ * in kernel space, and the breakpoint will be active on all CPUs
+ * regardless of the current task.
+ *
+ * The length is the breakpoint's extent in bytes, which is subject to
+ * certain limitations.  include/asm/hw_breakpoint.h contains macros
+ * defining the available lengths for a specific architecture.  Note that
+ * the address's alignment must match the length.  The breakpoint will
+ * catch accesses to any byte in the range from address to address +
+ * (length - 1).
+ *
+ * The breakpoint's type indicates the sort of access that will cause it
+ * to trigger.  Possible values may include:
+ *
+ * 	%HW_BREAKPOINT_RW (triggered on read or write access),
+ * 	%HW_BREAKPOINT_WRITE (triggered on write access), and
+ * 	%HW_BREAKPOINT_READ (triggered on read access).
+ *
+ * Appropriate macros are defined in include/asm/hw_breakpoint.h; not all
+ * possibilities are available on all architectures.  Execute breakpoints
+ * must have length equal to the special value %HW_BREAKPOINT_LEN_EXECUTE.
+ *
+ * When a breakpoint gets hit, the @triggered callback is
+ * invoked in_interrupt with a pointer to the %hw_breakpoint structure and the
+ * processor registers.
+ * Data breakpoints occur after the memory access has taken place.
+ * Breakpoints are disabled during execution @triggered, to avoid
+ * recursive traps and allow unhindered access to breakpointed memory.
+ *
+ * This sample code sets a breakpoint on pid_max and registers a callback
+ * function for writes to that variable.  Note that it is not portable
+ * as written, because not all architectures support HW_BREAKPOINT_LEN_4.
+ *
+ * ----------------------------------------------------------------------
+ *
+ * #include <asm/hw_breakpoint.h>
+ *
+ * struct hw_breakpoint my_bp;
+ *
+ * static void my_triggered(struct hw_breakpoint *bp, struct pt_regs *regs)
+ * {
+ * 	printk(KERN_DEBUG "Inside triggered routine of breakpoint exception\n");
+ * 	dump_stack();
+ *  	.......<more debugging output>........
+ * }
+ *
+ * static struct hw_breakpoint my_bp;
+ *
+ * static int init_module(void)
+ * {
+ *	..........<do anything>............
+ *	my_bp.info.type = HW_BREAKPOINT_WRITE;
+ *	my_bp.info.len = HW_BREAKPOINT_LEN_4;
+ *
+ *	my_bp.installed = (void *)my_bp_installed;
+ *
+ *	rc = register_kernel_hw_breakpoint(&my_bp);
+ *	..........<do anything>............
+ * }
+ *
+ * static void cleanup_module(void)
+ * {
+ *	..........<do anything>............
+ *	unregister_kernel_hw_breakpoint(&my_bp);
+ *	..........<do anything>............
+ * }
+ *
+ * ----------------------------------------------------------------------
+ */
+struct hw_breakpoint {
+	void (*triggered)(struct hw_breakpoint *, struct pt_regs *);
+	struct arch_hw_breakpoint info;
+};
+
+/*
+ * len and type values are defined in include/asm/hw_breakpoint.h.
+ * Available values vary according to the architecture.  On i386 the
+ * possibilities are:
+ *
+ *	HW_BREAKPOINT_LEN_1
+ *	HW_BREAKPOINT_LEN_2
+ *	HW_BREAKPOINT_LEN_4
+ *	HW_BREAKPOINT_RW
+ *	HW_BREAKPOINT_READ
+ *
+ * On other architectures HW_BREAKPOINT_LEN_8 may be available, and the
+ * 1-, 2-, and 4-byte lengths may be unavailable.  There also may be
+ * HW_BREAKPOINT_WRITE.  You can use #ifdef to check at compile time.
+ */
+
+extern int register_user_hw_breakpoint(struct task_struct *tsk,
+					struct hw_breakpoint *bp);
+extern int modify_user_hw_breakpoint(struct task_struct *tsk,
+					struct hw_breakpoint *bp);
+extern void unregister_user_hw_breakpoint(struct task_struct *tsk,
+						struct hw_breakpoint *bp);
+/*
+ * Kernel breakpoints are not associated with any particular thread.
+ */
+extern int register_kernel_hw_breakpoint(struct hw_breakpoint *bp);
+extern void unregister_kernel_hw_breakpoint(struct hw_breakpoint *bp);
+
+extern unsigned int hbp_kernel_pos;
+
+#endif	/* __KERNEL__ */
+#endif	/* _LINUX_HW_BREAKPOINT_H */