summaryrefslogtreecommitdiffstats
path: root/include/linux/ide.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /include/linux/ide.h
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'include/linux/ide.h')
-rw-r--r--include/linux/ide.h1516
1 files changed, 1516 insertions, 0 deletions
diff --git a/include/linux/ide.h b/include/linux/ide.h
new file mode 100644
index 00000000000..9cfc0999bec
--- /dev/null
+++ b/include/linux/ide.h
@@ -0,0 +1,1516 @@
+#ifndef _IDE_H
+#define _IDE_H
+/*
+ * linux/include/linux/ide.h
+ *
+ * Copyright (C) 1994-2002 Linus Torvalds & authors
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/hdreg.h>
+#include <linux/hdsmart.h>
+#include <linux/blkdev.h>
+#include <linux/proc_fs.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <linux/bio.h>
+#include <linux/device.h>
+#include <linux/pci.h>
+#include <asm/byteorder.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/semaphore.h>
+
+/*
+ * This is the multiple IDE interface driver, as evolved from hd.c.
+ * It supports up to four IDE interfaces, on one or more IRQs (usually 14 & 15).
+ * There can be up to two drives per interface, as per the ATA-2 spec.
+ *
+ * Primary i/f: ide0: major=3; (hda) minor=0; (hdb) minor=64
+ * Secondary i/f: ide1: major=22; (hdc or hd1a) minor=0; (hdd or hd1b) minor=64
+ * Tertiary i/f: ide2: major=33; (hde) minor=0; (hdf) minor=64
+ * Quaternary i/f: ide3: major=34; (hdg) minor=0; (hdh) minor=64
+ */
+
+/******************************************************************************
+ * IDE driver configuration options (play with these as desired):
+ *
+ * REALLY_SLOW_IO can be defined in ide.c and ide-cd.c, if necessary
+ */
+#define INITIAL_MULT_COUNT 0 /* off=0; on=2,4,8,16,32, etc.. */
+
+#ifndef SUPPORT_SLOW_DATA_PORTS /* 1 to support slow data ports */
+#define SUPPORT_SLOW_DATA_PORTS 1 /* 0 to reduce kernel size */
+#endif
+#ifndef SUPPORT_VLB_SYNC /* 1 to support weird 32-bit chips */
+#define SUPPORT_VLB_SYNC 1 /* 0 to reduce kernel size */
+#endif
+#ifndef OK_TO_RESET_CONTROLLER /* 1 needed for good error recovery */
+#define OK_TO_RESET_CONTROLLER 1 /* 0 for use with AH2372A/B interface */
+#endif
+
+#ifndef DISABLE_IRQ_NOSYNC
+#define DISABLE_IRQ_NOSYNC 0
+#endif
+
+/*
+ * Used to indicate "no IRQ", should be a value that cannot be an IRQ
+ * number.
+ */
+
+#define IDE_NO_IRQ (-1)
+
+/*
+ * "No user-serviceable parts" beyond this point :)
+ *****************************************************************************/
+
+typedef unsigned char byte; /* used everywhere */
+
+/*
+ * Probably not wise to fiddle with these
+ */
+#define ERROR_MAX 8 /* Max read/write errors per sector */
+#define ERROR_RESET 3 /* Reset controller every 4th retry */
+#define ERROR_RECAL 1 /* Recalibrate every 2nd retry */
+
+/*
+ * Tune flags
+ */
+#define IDE_TUNE_NOAUTO 2
+#define IDE_TUNE_AUTO 1
+#define IDE_TUNE_DEFAULT 0
+
+/*
+ * state flags
+ */
+
+#define DMA_PIO_RETRY 1 /* retrying in PIO */
+
+#define HWIF(drive) ((ide_hwif_t *)((drive)->hwif))
+#define HWGROUP(drive) ((ide_hwgroup_t *)(HWIF(drive)->hwgroup))
+
+/*
+ * Definitions for accessing IDE controller registers
+ */
+#define IDE_NR_PORTS (10)
+
+#define IDE_DATA_OFFSET (0)
+#define IDE_ERROR_OFFSET (1)
+#define IDE_NSECTOR_OFFSET (2)
+#define IDE_SECTOR_OFFSET (3)
+#define IDE_LCYL_OFFSET (4)
+#define IDE_HCYL_OFFSET (5)
+#define IDE_SELECT_OFFSET (6)
+#define IDE_STATUS_OFFSET (7)
+#define IDE_CONTROL_OFFSET (8)
+#define IDE_IRQ_OFFSET (9)
+
+#define IDE_FEATURE_OFFSET IDE_ERROR_OFFSET
+#define IDE_COMMAND_OFFSET IDE_STATUS_OFFSET
+
+#define IDE_CONTROL_OFFSET_HOB (7)
+
+#define IDE_DATA_REG (HWIF(drive)->io_ports[IDE_DATA_OFFSET])
+#define IDE_ERROR_REG (HWIF(drive)->io_ports[IDE_ERROR_OFFSET])
+#define IDE_NSECTOR_REG (HWIF(drive)->io_ports[IDE_NSECTOR_OFFSET])
+#define IDE_SECTOR_REG (HWIF(drive)->io_ports[IDE_SECTOR_OFFSET])
+#define IDE_LCYL_REG (HWIF(drive)->io_ports[IDE_LCYL_OFFSET])
+#define IDE_HCYL_REG (HWIF(drive)->io_ports[IDE_HCYL_OFFSET])
+#define IDE_SELECT_REG (HWIF(drive)->io_ports[IDE_SELECT_OFFSET])
+#define IDE_STATUS_REG (HWIF(drive)->io_ports[IDE_STATUS_OFFSET])
+#define IDE_CONTROL_REG (HWIF(drive)->io_ports[IDE_CONTROL_OFFSET])
+#define IDE_IRQ_REG (HWIF(drive)->io_ports[IDE_IRQ_OFFSET])
+
+#define IDE_FEATURE_REG IDE_ERROR_REG
+#define IDE_COMMAND_REG IDE_STATUS_REG
+#define IDE_ALTSTATUS_REG IDE_CONTROL_REG
+#define IDE_IREASON_REG IDE_NSECTOR_REG
+#define IDE_BCOUNTL_REG IDE_LCYL_REG
+#define IDE_BCOUNTH_REG IDE_HCYL_REG
+
+#define OK_STAT(stat,good,bad) (((stat)&((good)|(bad)))==(good))
+#define BAD_R_STAT (BUSY_STAT | ERR_STAT)
+#define BAD_W_STAT (BAD_R_STAT | WRERR_STAT)
+#define BAD_STAT (BAD_R_STAT | DRQ_STAT)
+#define DRIVE_READY (READY_STAT | SEEK_STAT)
+#define DATA_READY (DRQ_STAT)
+
+#define BAD_CRC (ABRT_ERR | ICRC_ERR)
+
+#define SATA_NR_PORTS (3) /* 16 possible ?? */
+
+#define SATA_STATUS_OFFSET (0)
+#define SATA_STATUS_REG (HWIF(drive)->sata_scr[SATA_STATUS_OFFSET])
+#define SATA_ERROR_OFFSET (1)
+#define SATA_ERROR_REG (HWIF(drive)->sata_scr[SATA_ERROR_OFFSET])
+#define SATA_CONTROL_OFFSET (2)
+#define SATA_CONTROL_REG (HWIF(drive)->sata_scr[SATA_CONTROL_OFFSET])
+
+#define SATA_MISC_OFFSET (0)
+#define SATA_MISC_REG (HWIF(drive)->sata_misc[SATA_MISC_OFFSET])
+#define SATA_PHY_OFFSET (1)
+#define SATA_PHY_REG (HWIF(drive)->sata_misc[SATA_PHY_OFFSET])
+#define SATA_IEN_OFFSET (2)
+#define SATA_IEN_REG (HWIF(drive)->sata_misc[SATA_IEN_OFFSET])
+
+/*
+ * Our Physical Region Descriptor (PRD) table should be large enough
+ * to handle the biggest I/O request we are likely to see. Since requests
+ * can have no more than 256 sectors, and since the typical blocksize is
+ * two or more sectors, we could get by with a limit of 128 entries here for
+ * the usual worst case. Most requests seem to include some contiguous blocks,
+ * further reducing the number of table entries required.
+ *
+ * The driver reverts to PIO mode for individual requests that exceed
+ * this limit (possible with 512 byte blocksizes, eg. MSDOS f/s), so handling
+ * 100% of all crazy scenarios here is not necessary.
+ *
+ * As it turns out though, we must allocate a full 4KB page for this,
+ * so the two PRD tables (ide0 & ide1) will each get half of that,
+ * allowing each to have about 256 entries (8 bytes each) from this.
+ */
+#define PRD_BYTES 8
+#define PRD_ENTRIES 256
+
+/*
+ * Some more useful definitions
+ */
+#define PARTN_BITS 6 /* number of minor dev bits for partitions */
+#define MAX_DRIVES 2 /* per interface; 2 assumed by lots of code */
+#define SECTOR_SIZE 512
+#define SECTOR_WORDS (SECTOR_SIZE / 4) /* number of 32bit words per sector */
+#define IDE_LARGE_SEEK(b1,b2,t) (((b1) > (b2) + (t)) || ((b2) > (b1) + (t)))
+
+/*
+ * Timeouts for various operations:
+ */
+#define WAIT_DRQ (HZ/10) /* 100msec - spec allows up to 20ms */
+#define WAIT_READY (5*HZ) /* 5sec - some laptops are very slow */
+#define WAIT_PIDENTIFY (10*HZ) /* 10sec - should be less than 3ms (?), if all ATAPI CD is closed at boot */
+#define WAIT_WORSTCASE (30*HZ) /* 30sec - worst case when spinning up */
+#define WAIT_CMD (10*HZ) /* 10sec - maximum wait for an IRQ to happen */
+#define WAIT_MIN_SLEEP (2*HZ/100) /* 20msec - minimum sleep time */
+
+#define HOST(hwif,chipset) \
+{ \
+ return ((hwif)->chipset == chipset) ? 1 : 0; \
+}
+
+/*
+ * Check for an interrupt and acknowledge the interrupt status
+ */
+struct hwif_s;
+typedef int (ide_ack_intr_t)(struct hwif_s *);
+
+#ifndef NO_DMA
+#define NO_DMA 255
+#endif
+
+/*
+ * hwif_chipset_t is used to keep track of the specific hardware
+ * chipset used by each IDE interface, if known.
+ */
+typedef enum { ide_unknown, ide_generic, ide_pci,
+ ide_cmd640, ide_dtc2278, ide_ali14xx,
+ ide_qd65xx, ide_umc8672, ide_ht6560b,
+ ide_rz1000, ide_trm290,
+ ide_cmd646, ide_cy82c693, ide_4drives,
+ ide_pmac, ide_etrax100, ide_acorn,
+ ide_forced
+} hwif_chipset_t;
+
+/*
+ * Structure to hold all information about the location of this port
+ */
+typedef struct hw_regs_s {
+ unsigned long io_ports[IDE_NR_PORTS]; /* task file registers */
+ int irq; /* our irq number */
+ int dma; /* our dma entry */
+ ide_ack_intr_t *ack_intr; /* acknowledge interrupt */
+ hwif_chipset_t chipset;
+} hw_regs_t;
+
+/*
+ * Register new hardware with ide
+ */
+int ide_register_hw(hw_regs_t *hw, struct hwif_s **hwifp);
+int ide_register_hw_with_fixup(hw_regs_t *, struct hwif_s **, void (*)(struct hwif_s *));
+
+/*
+ * Set up hw_regs_t structure before calling ide_register_hw (optional)
+ */
+void ide_setup_ports( hw_regs_t *hw,
+ unsigned long base,
+ int *offsets,
+ unsigned long ctrl,
+ unsigned long intr,
+ ide_ack_intr_t *ack_intr,
+#if 0
+ ide_io_ops_t *iops,
+#endif
+ int irq);
+
+static inline void ide_std_init_ports(hw_regs_t *hw,
+ unsigned long io_addr,
+ unsigned long ctl_addr)
+{
+ unsigned int i;
+
+ for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
+ hw->io_ports[i] = io_addr++;
+
+ hw->io_ports[IDE_CONTROL_OFFSET] = ctl_addr;
+}
+
+#include <asm/ide.h>
+
+/* needed on alpha, x86/x86_64, ia64, mips, ppc32 and sh */
+#ifndef IDE_ARCH_OBSOLETE_DEFAULTS
+# define ide_default_io_base(index) (0)
+# define ide_default_irq(base) (0)
+# define ide_init_default_irq(base) (0)
+#endif
+
+/*
+ * ide_init_hwif_ports() is OBSOLETE and will be removed in 2.7 series.
+ * New ports shouldn't define IDE_ARCH_OBSOLETE_INIT in <asm/ide.h>.
+ */
+#ifdef IDE_ARCH_OBSOLETE_INIT
+static inline void ide_init_hwif_ports(hw_regs_t *hw,
+ unsigned long io_addr,
+ unsigned long ctl_addr,
+ int *irq)
+{
+ if (!ctl_addr)
+ ide_std_init_ports(hw, io_addr, ide_default_io_ctl(io_addr));
+ else
+ ide_std_init_ports(hw, io_addr, ctl_addr);
+
+ if (irq)
+ *irq = 0;
+
+ hw->io_ports[IDE_IRQ_OFFSET] = 0;
+
+#ifdef CONFIG_PPC32
+ if (ppc_ide_md.ide_init_hwif)
+ ppc_ide_md.ide_init_hwif(hw, io_addr, ctl_addr, irq);
+#endif
+}
+#else
+static inline void ide_init_hwif_ports(hw_regs_t *hw,
+ unsigned long io_addr,
+ unsigned long ctl_addr,
+ int *irq)
+{
+ if (io_addr || ctl_addr)
+ printk(KERN_WARNING "%s: must not be called\n", __FUNCTION__);
+}
+#endif /* IDE_ARCH_OBSOLETE_INIT */
+
+/* Currently only m68k, apus and m8xx need it */
+#ifndef IDE_ARCH_ACK_INTR
+# define ide_ack_intr(hwif) (1)
+#endif
+
+/* Currently only Atari needs it */
+#ifndef IDE_ARCH_LOCK
+# define ide_release_lock() do {} while (0)
+# define ide_get_lock(hdlr, data) do {} while (0)
+#endif /* IDE_ARCH_LOCK */
+
+/*
+ * Now for the data we need to maintain per-drive: ide_drive_t
+ */
+
+#define ide_scsi 0x21
+#define ide_disk 0x20
+#define ide_optical 0x7
+#define ide_cdrom 0x5
+#define ide_tape 0x1
+#define ide_floppy 0x0
+
+/*
+ * Special Driver Flags
+ *
+ * set_geometry : respecify drive geometry
+ * recalibrate : seek to cyl 0
+ * set_multmode : set multmode count
+ * set_tune : tune interface for drive
+ * serviced : service command
+ * reserved : unused
+ */
+typedef union {
+ unsigned all : 8;
+ struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ unsigned set_geometry : 1;
+ unsigned recalibrate : 1;
+ unsigned set_multmode : 1;
+ unsigned set_tune : 1;
+ unsigned serviced : 1;
+ unsigned reserved : 3;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ unsigned reserved : 3;
+ unsigned serviced : 1;
+ unsigned set_tune : 1;
+ unsigned set_multmode : 1;
+ unsigned recalibrate : 1;
+ unsigned set_geometry : 1;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+ } b;
+} special_t;
+
+/*
+ * ATA DATA Register Special.
+ * ATA NSECTOR Count Register().
+ * ATAPI Byte Count Register.
+ * Channel index ordering pairs.
+ */
+typedef union {
+ unsigned all :16;
+ struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ unsigned low :8; /* LSB */
+ unsigned high :8; /* MSB */
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ unsigned high :8; /* MSB */
+ unsigned low :8; /* LSB */
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+ } b;
+} ata_nsector_t, ata_data_t, atapi_bcount_t, ata_index_t;
+
+/*
+ * ATA-IDE Error Register
+ *
+ * mark : Bad address mark
+ * tzero : Couldn't find track 0
+ * abrt : Aborted Command
+ * mcr : Media Change Request
+ * id : ID field not found
+ * mce : Media Change Event
+ * ecc : Uncorrectable ECC error
+ * bdd : dual meaing
+ */
+typedef union {
+ unsigned all :8;
+ struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ unsigned mark :1;
+ unsigned tzero :1;
+ unsigned abrt :1;
+ unsigned mcr :1;
+ unsigned id :1;
+ unsigned mce :1;
+ unsigned ecc :1;
+ unsigned bdd :1;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ unsigned bdd :1;
+ unsigned ecc :1;
+ unsigned mce :1;
+ unsigned id :1;
+ unsigned mcr :1;
+ unsigned abrt :1;
+ unsigned tzero :1;
+ unsigned mark :1;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+ } b;
+} ata_error_t;
+
+/*
+ * ATA-IDE Select Register, aka Device-Head
+ *
+ * head : always zeros here
+ * unit : drive select number: 0/1
+ * bit5 : always 1
+ * lba : using LBA instead of CHS
+ * bit7 : always 1
+ */
+typedef union {
+ unsigned all : 8;
+ struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ unsigned head : 4;
+ unsigned unit : 1;
+ unsigned bit5 : 1;
+ unsigned lba : 1;
+ unsigned bit7 : 1;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ unsigned bit7 : 1;
+ unsigned lba : 1;
+ unsigned bit5 : 1;
+ unsigned unit : 1;
+ unsigned head : 4;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+ } b;
+} select_t, ata_select_t;
+
+/*
+ * The ATA-IDE Status Register.
+ * The ATAPI Status Register.
+ *
+ * check : Error occurred
+ * idx : Index Error
+ * corr : Correctable error occurred
+ * drq : Data is request by the device
+ * dsc : Disk Seek Complete : ata
+ * : Media access command finished : atapi
+ * df : Device Fault : ata
+ * : Reserved : atapi
+ * drdy : Ready, Command Mode Capable : ata
+ * : Ignored for ATAPI commands : atapi
+ * bsy : Disk is Busy
+ * : The device has access to the command block
+ */
+typedef union {
+ unsigned all :8;
+ struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ unsigned check :1;
+ unsigned idx :1;
+ unsigned corr :1;
+ unsigned drq :1;
+ unsigned dsc :1;
+ unsigned df :1;
+ unsigned drdy :1;
+ unsigned bsy :1;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ unsigned bsy :1;
+ unsigned drdy :1;
+ unsigned df :1;
+ unsigned dsc :1;
+ unsigned drq :1;
+ unsigned corr :1;
+ unsigned idx :1;
+ unsigned check :1;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+ } b;
+} ata_status_t, atapi_status_t;
+
+/*
+ * ATA-IDE Control Register
+ *
+ * bit0 : Should be set to zero
+ * nIEN : device INTRQ to host
+ * SRST : host soft reset bit
+ * bit3 : ATA-2 thingy, Should be set to 1
+ * reserved456 : Reserved
+ * HOB : 48-bit address ordering, High Ordered Bit
+ */
+typedef union {
+ unsigned all : 8;
+ struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ unsigned bit0 : 1;
+ unsigned nIEN : 1;
+ unsigned SRST : 1;
+ unsigned bit3 : 1;
+ unsigned reserved456 : 3;
+ unsigned HOB : 1;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ unsigned HOB : 1;
+ unsigned reserved456 : 3;
+ unsigned bit3 : 1;
+ unsigned SRST : 1;
+ unsigned nIEN : 1;
+ unsigned bit0 : 1;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+ } b;
+} ata_control_t;
+
+/*
+ * ATAPI Feature Register
+ *
+ * dma : Using DMA or PIO
+ * reserved321 : Reserved
+ * reserved654 : Reserved (Tag Type)
+ * reserved7 : Reserved
+ */
+typedef union {
+ unsigned all :8;
+ struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ unsigned dma :1;
+ unsigned reserved321 :3;
+ unsigned reserved654 :3;
+ unsigned reserved7 :1;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ unsigned reserved7 :1;
+ unsigned reserved654 :3;
+ unsigned reserved321 :3;
+ unsigned dma :1;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+ } b;
+} atapi_feature_t;
+
+/*
+ * ATAPI Interrupt Reason Register.
+ *
+ * cod : Information transferred is command (1) or data (0)
+ * io : The device requests us to read (1) or write (0)
+ * reserved : Reserved
+ */
+typedef union {
+ unsigned all :8;
+ struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ unsigned cod :1;
+ unsigned io :1;
+ unsigned reserved :6;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ unsigned reserved :6;
+ unsigned io :1;
+ unsigned cod :1;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+ } b;
+} atapi_ireason_t;
+
+/*
+ * The ATAPI error register.
+ *
+ * ili : Illegal Length Indication
+ * eom : End Of Media Detected
+ * abrt : Aborted command - As defined by ATA
+ * mcr : Media Change Requested - As defined by ATA
+ * sense_key : Sense key of the last failed packet command
+ */
+typedef union {
+ unsigned all :8;
+ struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ unsigned ili :1;
+ unsigned eom :1;
+ unsigned abrt :1;
+ unsigned mcr :1;
+ unsigned sense_key :4;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ unsigned sense_key :4;
+ unsigned mcr :1;
+ unsigned abrt :1;
+ unsigned eom :1;
+ unsigned ili :1;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+ } b;
+} atapi_error_t;
+
+/*
+ * ATAPI floppy Drive Select Register
+ *
+ * sam_lun : Logical unit number
+ * reserved3 : Reserved
+ * drv : The responding drive will be drive 0 (0) or drive 1 (1)
+ * one5 : Should be set to 1
+ * reserved6 : Reserved
+ * one7 : Should be set to 1
+ */
+typedef union {
+ unsigned all :8;
+ struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ unsigned sam_lun :3;
+ unsigned reserved3 :1;
+ unsigned drv :1;
+ unsigned one5 :1;
+ unsigned reserved6 :1;
+ unsigned one7 :1;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ unsigned one7 :1;
+ unsigned reserved6 :1;
+ unsigned one5 :1;
+ unsigned drv :1;
+ unsigned reserved3 :1;
+ unsigned sam_lun :3;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+ } b;
+} atapi_select_t;
+
+/*
+ * Status returned from various ide_ functions
+ */
+typedef enum {
+ ide_stopped, /* no drive operation was started */
+ ide_started, /* a drive operation was started, handler was set */
+} ide_startstop_t;
+
+struct ide_driver_s;
+struct ide_settings_s;
+
+typedef struct ide_drive_s {
+ char name[4]; /* drive name, such as "hda" */
+ char driver_req[10]; /* requests specific driver */
+
+ request_queue_t *queue; /* request queue */
+
+ struct request *rq; /* current request */
+ struct ide_drive_s *next; /* circular list of hwgroup drives */
+ struct ide_driver_s *driver;/* (ide_driver_t *) */
+ void *driver_data; /* extra driver data */
+ struct hd_driveid *id; /* drive model identification info */
+ struct proc_dir_entry *proc; /* /proc/ide/ directory entry */
+ struct ide_settings_s *settings;/* /proc/ide/ drive settings */
+ char devfs_name[64]; /* devfs crap */
+
+ struct hwif_s *hwif; /* actually (ide_hwif_t *) */
+
+ unsigned long sleep; /* sleep until this time */
+ unsigned long service_start; /* time we started last request */
+ unsigned long service_time; /* service time of last request */
+ unsigned long timeout; /* max time to wait for irq */
+
+ special_t special; /* special action flags */
+ select_t select; /* basic drive/head select reg value */
+
+ u8 keep_settings; /* restore settings after drive reset */
+ u8 autodma; /* device can safely use dma on host */
+ u8 using_dma; /* disk is using dma for read/write */
+ u8 retry_pio; /* retrying dma capable host in pio */
+ u8 state; /* retry state */
+ u8 waiting_for_dma; /* dma currently in progress */
+ u8 unmask; /* okay to unmask other irqs */
+ u8 bswap; /* byte swap data */
+ u8 dsc_overlap; /* DSC overlap */
+ u8 nice1; /* give potential excess bandwidth */
+
+ unsigned present : 1; /* drive is physically present */
+ unsigned dead : 1; /* device ejected hint */
+ unsigned id_read : 1; /* 1=id read from disk 0 = synthetic */
+ unsigned noprobe : 1; /* from: hdx=noprobe */
+ unsigned removable : 1; /* 1 if need to do check_media_change */
+ unsigned attach : 1; /* needed for removable devices */
+ unsigned is_flash : 1; /* 1 if probed as flash */
+ unsigned forced_geom : 1; /* 1 if hdx=c,h,s was given at boot */
+ unsigned no_unmask : 1; /* disallow setting unmask bit */
+ unsigned no_io_32bit : 1; /* disallow enabling 32bit I/O */
+ unsigned atapi_overlap : 1; /* ATAPI overlap (not supported) */
+ unsigned nice0 : 1; /* give obvious excess bandwidth */
+ unsigned nice2 : 1; /* give a share in our own bandwidth */
+ unsigned doorlocking : 1; /* for removable only: door lock/unlock works */
+ unsigned autotune : 2; /* 0=default, 1=autotune, 2=noautotune */
+ unsigned remap_0_to_1 : 1; /* 0=noremap, 1=remap 0->1 (for EZDrive) */
+ unsigned blocked : 1; /* 1=powermanagment told us not to do anything, so sleep nicely */
+ unsigned vdma : 1; /* 1=doing PIO over DMA 0=doing normal DMA */
+ unsigned addressing; /* : 3;
+ * 0=28-bit
+ * 1=48-bit
+ * 2=48-bit doing 28-bit
+ * 3=64-bit
+ */
+ unsigned scsi : 1; /* 0=default, 1=ide-scsi emulation */
+ unsigned sleeping : 1; /* 1=sleeping & sleep field valid */
+ unsigned post_reset : 1;
+
+ u8 quirk_list; /* considered quirky, set for a specific host */
+ u8 init_speed; /* transfer rate set at boot */
+ u8 pio_speed; /* unused by core, used by some drivers for fallback from DMA */
+ u8 current_speed; /* current transfer rate set */
+ u8 dn; /* now wide spread use */
+ u8 wcache; /* status of write cache */
+ u8 acoustic; /* acoustic management */
+ u8 media; /* disk, cdrom, tape, floppy, ... */
+ u8 ctl; /* "normal" value for IDE_CONTROL_REG */
+ u8 ready_stat; /* min status value for drive ready */
+ u8 mult_count; /* current multiple sector setting */
+ u8 mult_req; /* requested multiple sector setting */
+ u8 tune_req; /* requested drive tuning setting */
+ u8 io_32bit; /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */
+ u8 bad_wstat; /* used for ignoring WRERR_STAT */
+ u8 nowerr; /* used for ignoring WRERR_STAT */
+ u8 sect0; /* offset of first sector for DM6:DDO */
+ u8 head; /* "real" number of heads */
+ u8 sect; /* "real" sectors per track */
+ u8 bios_head; /* BIOS/fdisk/LILO number of heads */
+ u8 bios_sect; /* BIOS/fdisk/LILO sectors per track */
+
+ unsigned int bios_cyl; /* BIOS/fdisk/LILO number of cyls */
+ unsigned int cyl; /* "real" number of cyls */
+ unsigned int drive_data; /* use by tuneproc/selectproc */
+ unsigned int usage; /* current "open()" count for drive */
+ unsigned int failures; /* current failure count */
+ unsigned int max_failures; /* maximum allowed failure count */
+
+ u64 capacity64; /* total number of sectors */
+
+ int lun; /* logical unit */
+ int crc_count; /* crc counter to reduce drive speed */
+ struct list_head list;
+ struct device gendev;
+ struct semaphore gendev_rel_sem; /* to deal with device release() */
+} ide_drive_t;
+
+#define IDE_CHIPSET_PCI_MASK \
+ ((1<<ide_pci)|(1<<ide_cmd646)|(1<<ide_ali14xx))
+#define IDE_CHIPSET_IS_PCI(c) ((IDE_CHIPSET_PCI_MASK >> (c)) & 1)
+
+struct ide_pci_device_s;
+
+typedef struct hwif_s {
+ struct hwif_s *next; /* for linked-list in ide_hwgroup_t */
+ struct hwif_s *mate; /* other hwif from same PCI chip */
+ struct hwgroup_s *hwgroup; /* actually (ide_hwgroup_t *) */
+ struct proc_dir_entry *proc; /* /proc/ide/ directory entry */
+
+ char name[6]; /* name of interface, eg. "ide0" */
+
+ /* task file registers for pata and sata */
+ unsigned long io_ports[IDE_NR_PORTS];
+ unsigned long sata_scr[SATA_NR_PORTS];
+ unsigned long sata_misc[SATA_NR_PORTS];
+
+ hw_regs_t hw; /* Hardware info */
+ ide_drive_t drives[MAX_DRIVES]; /* drive info */
+
+ u8 major; /* our major number */
+ u8 index; /* 0 for ide0; 1 for ide1; ... */
+ u8 channel; /* for dual-port chips: 0=primary, 1=secondary */
+ u8 straight8; /* Alan's straight 8 check */
+ u8 bus_state; /* power state of the IDE bus */
+
+ u8 atapi_dma; /* host supports atapi_dma */
+ u8 ultra_mask;
+ u8 mwdma_mask;
+ u8 swdma_mask;
+
+ hwif_chipset_t chipset; /* sub-module for tuning.. */
+
+ struct pci_dev *pci_dev; /* for pci chipsets */
+ struct ide_pci_device_s *cds; /* chipset device struct */
+
+ void (*rw_disk)(ide_drive_t *, struct request *);
+
+#if 0
+ ide_hwif_ops_t *hwifops;
+#else
+ /* routine to tune PIO mode for drives */
+ void (*tuneproc)(ide_drive_t *, u8);
+ /* routine to retune DMA modes for drives */
+ int (*speedproc)(ide_drive_t *, u8);
+ /* tweaks hardware to select drive */
+ void (*selectproc)(ide_drive_t *);
+ /* chipset polling based on hba specifics */
+ int (*reset_poll)(ide_drive_t *);
+ /* chipset specific changes to default for device-hba resets */
+ void (*pre_reset)(ide_drive_t *);
+ /* routine to reset controller after a disk reset */
+ void (*resetproc)(ide_drive_t *);
+ /* special interrupt handling for shared pci interrupts */
+ void (*intrproc)(ide_drive_t *);
+ /* special host masking for drive selection */
+ void (*maskproc)(ide_drive_t *, int);
+ /* check host's drive quirk list */
+ int (*quirkproc)(ide_drive_t *);
+ /* driver soft-power interface */
+ int (*busproc)(ide_drive_t *, int);
+// /* host rate limiter */
+// u8 (*ratemask)(ide_drive_t *);
+// /* device rate limiter */
+// u8 (*ratefilter)(ide_drive_t *, u8);
+#endif
+
+ void (*ata_input_data)(ide_drive_t *, void *, u32);
+ void (*ata_output_data)(ide_drive_t *, void *, u32);
+
+ void (*atapi_input_bytes)(ide_drive_t *, void *, u32);
+ void (*atapi_output_bytes)(ide_drive_t *, void *, u32);
+
+ int (*dma_setup)(ide_drive_t *);
+ void (*dma_exec_cmd)(ide_drive_t *, u8);
+ void (*dma_start)(ide_drive_t *);
+ int (*ide_dma_end)(ide_drive_t *drive);
+ int (*ide_dma_check)(ide_drive_t *drive);
+ int (*ide_dma_on)(ide_drive_t *drive);
+ int (*ide_dma_off_quietly)(ide_drive_t *drive);
+ int (*ide_dma_test_irq)(ide_drive_t *drive);
+ int (*ide_dma_host_on)(ide_drive_t *drive);
+ int (*ide_dma_host_off)(ide_drive_t *drive);
+ int (*ide_dma_lostirq)(ide_drive_t *drive);
+ int (*ide_dma_timeout)(ide_drive_t *drive);
+
+ void (*OUTB)(u8 addr, unsigned long port);
+ void (*OUTBSYNC)(ide_drive_t *drive, u8 addr, unsigned long port);
+ void (*OUTW)(u16 addr, unsigned long port);
+ void (*OUTL)(u32 addr, unsigned long port);
+ void (*OUTSW)(unsigned long port, void *addr, u32 count);
+ void (*OUTSL)(unsigned long port, void *addr, u32 count);
+
+ u8 (*INB)(unsigned long port);
+ u16 (*INW)(unsigned long port);
+ u32 (*INL)(unsigned long port);
+ void (*INSW)(unsigned long port, void *addr, u32 count);
+ void (*INSL)(unsigned long port, void *addr, u32 count);
+
+ /* dma physical region descriptor table (cpu view) */
+ unsigned int *dmatable_cpu;
+ /* dma physical region descriptor table (dma view) */
+ dma_addr_t dmatable_dma;
+ /* Scatter-gather list used to build the above */
+ struct scatterlist *sg_table;
+ int sg_max_nents; /* Maximum number of entries in it */
+ int sg_nents; /* Current number of entries in it */
+ int sg_dma_direction; /* dma transfer direction */
+
+ /* data phase of the active command (currently only valid for PIO/DMA) */
+ int data_phase;
+
+ unsigned int nsect;
+ unsigned int nleft;
+ unsigned int cursg;
+ unsigned int cursg_ofs;
+
+ int mmio; /* hosts iomio (0) or custom (2) select */
+ int rqsize; /* max sectors per request */
+ int irq; /* our irq number */
+
+ unsigned long dma_master; /* reference base addr dmabase */
+ unsigned long dma_base; /* base addr for dma ports */
+ unsigned long dma_command; /* dma command register */
+ unsigned long dma_vendor1; /* dma vendor 1 register */
+ unsigned long dma_status; /* dma status register */
+ unsigned long dma_vendor3; /* dma vendor 3 register */
+ unsigned long dma_prdtable; /* actual prd table address */
+ unsigned long dma_base2; /* extended base addr for dma ports */
+
+ unsigned dma_extra; /* extra addr for dma ports */
+ unsigned long config_data; /* for use by chipset-specific code */
+ unsigned long select_data; /* for use by chipset-specific code */
+
+ unsigned noprobe : 1; /* don't probe for this interface */
+ unsigned present : 1; /* this interface exists */
+ unsigned hold : 1; /* this interface is always present */
+ unsigned serialized : 1; /* serialized all channel operation */
+ unsigned sharing_irq: 1; /* 1 = sharing irq with another hwif */
+ unsigned reset : 1; /* reset after probe */
+ unsigned autodma : 1; /* auto-attempt using DMA at boot */
+ unsigned udma_four : 1; /* 1=ATA-66 capable, 0=default */
+ unsigned no_lba48 : 1; /* 1 = cannot do LBA48 */
+ unsigned no_lba48_dma : 1; /* 1 = cannot do LBA48 DMA */
+ unsigned no_dsc : 1; /* 0 default, 1 dsc_overlap disabled */
+ unsigned auto_poll : 1; /* supports nop auto-poll */
+ unsigned sg_mapped : 1; /* sg_table and sg_nents are ready */
+
+ struct device gendev;
+ struct semaphore gendev_rel_sem; /* To deal with device release() */
+
+ void *hwif_data; /* extra hwif data */
+
+ unsigned dma;
+
+ void (*led_act)(void *data, int rw);
+} ide_hwif_t;
+
+/*
+ * internal ide interrupt handler type
+ */
+typedef ide_startstop_t (ide_pre_handler_t)(ide_drive_t *, struct request *);
+typedef ide_startstop_t (ide_handler_t)(ide_drive_t *);
+typedef int (ide_expiry_t)(ide_drive_t *);
+
+typedef struct hwgroup_s {
+ /* irq handler, if active */
+ ide_startstop_t (*handler)(ide_drive_t *);
+ /* irq handler, suspended if active */
+ ide_startstop_t (*handler_save)(ide_drive_t *);
+ /* BOOL: protects all fields below */
+ volatile int busy;
+ /* BOOL: wake us up on timer expiry */
+ unsigned int sleeping : 1;
+ /* BOOL: polling active & poll_timeout field valid */
+ unsigned int polling : 1;
+ /* current drive */
+ ide_drive_t *drive;
+ /* ptr to current hwif in linked-list */
+ ide_hwif_t *hwif;
+
+ /* for pci chipsets */
+ struct pci_dev *pci_dev;
+ /* chipset device struct */
+ struct ide_pci_device_s *cds;
+
+ /* current request */
+ struct request *rq;
+ /* failsafe timer */
+ struct timer_list timer;
+ /* local copy of current write rq */
+ struct request wrq;
+ /* timeout value during long polls */
+ unsigned long poll_timeout;
+ /* queried upon timeouts */
+ int (*expiry)(ide_drive_t *);
+ /* ide_system_bus_speed */
+ int pio_clock;
+
+ unsigned char cmd_buf[4];
+} ide_hwgroup_t;
+
+/* structure attached to the request for IDE_TASK_CMDS */
+
+/*
+ * configurable drive settings
+ */
+
+#define TYPE_INT 0
+#define TYPE_INTA 1
+#define TYPE_BYTE 2
+#define TYPE_SHORT 3
+
+#define SETTING_READ (1 << 0)
+#define SETTING_WRITE (1 << 1)
+#define SETTING_RW (SETTING_READ | SETTING_WRITE)
+
+typedef int (ide_procset_t)(ide_drive_t *, int);
+typedef struct ide_settings_s {
+ char *name;
+ int rw;
+ int read_ioctl;
+ int write_ioctl;
+ int data_type;
+ int min;
+ int max;
+ int mul_factor;
+ int div_factor;
+ void *data;
+ ide_procset_t *set;
+ int auto_remove;
+ struct ide_settings_s *next;
+} ide_settings_t;
+
+extern struct semaphore ide_setting_sem;
+extern int ide_add_setting(ide_drive_t *drive, const char *name, int rw, int read_ioctl, int write_ioctl, int data_type, int min, int max, int mul_factor, int div_factor, void *data, ide_procset_t *set);
+extern ide_settings_t *ide_find_setting_by_name(ide_drive_t *drive, char *name);
+extern int ide_read_setting(ide_drive_t *t, ide_settings_t *setting);
+extern int ide_write_setting(ide_drive_t *drive, ide_settings_t *setting, int val);
+extern void ide_add_generic_settings(ide_drive_t *drive);
+
+/*
+ * /proc/ide interface
+ */
+typedef struct {
+ const char *name;
+ mode_t mode;
+ read_proc_t *read_proc;
+ write_proc_t *write_proc;
+} ide_proc_entry_t;
+
+#ifdef CONFIG_PROC_FS
+extern struct proc_dir_entry *proc_ide_root;
+
+extern void proc_ide_create(void);
+extern void proc_ide_destroy(void);
+extern void create_proc_ide_interfaces(void);
+void destroy_proc_ide_interface(ide_hwif_t *);
+extern void ide_add_proc_entries(struct proc_dir_entry *, ide_proc_entry_t *, void *);
+extern void ide_remove_proc_entries(struct proc_dir_entry *, ide_proc_entry_t *);
+read_proc_t proc_ide_read_capacity;
+read_proc_t proc_ide_read_geometry;
+
+#ifdef CONFIG_BLK_DEV_IDEPCI
+void ide_pci_create_host_proc(const char *, get_info_t *);
+#endif
+
+/*
+ * Standard exit stuff:
+ */
+#define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) \
+{ \
+ len -= off; \
+ if (len < count) { \
+ *eof = 1; \
+ if (len <= 0) \
+ return 0; \
+ } else \
+ len = count; \
+ *start = page + off; \
+ return len; \
+}
+#else
+static inline void create_proc_ide_interfaces(void) { ; }
+static inline void destroy_proc_ide_interface(ide_hwif_t *hwif) { ; }
+#define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) return 0;
+#endif
+
+/*
+ * Power Management step value (rq->pm->pm_step).
+ *
+ * The step value starts at 0 (ide_pm_state_start_suspend) for a
+ * suspend operation or 1000 (ide_pm_state_start_resume) for a
+ * resume operation.
+ *
+ * For each step, the core calls the subdriver start_power_step() first.
+ * This can return:
+ * - ide_stopped : In this case, the core calls us back again unless
+ * step have been set to ide_power_state_completed.
+ * - ide_started : In this case, the channel is left busy until an
+ * async event (interrupt) occurs.
+ * Typically, start_power_step() will issue a taskfile request with
+ * do_rw_taskfile().
+ *
+ * Upon reception of the interrupt, the core will call complete_power_step()
+ * with the error code if any. This routine should update the step value
+ * and return. It should not start a new request. The core will call
+ * start_power_step for the new step value, unless step have been set to
+ * ide_power_state_completed.
+ *
+ * Subdrivers are expected to define their own additional power
+ * steps from 1..999 for suspend and from 1001..1999 for resume,
+ * other values are reserved for future use.
+ */
+
+enum {
+ ide_pm_state_completed = -1,
+ ide_pm_state_start_suspend = 0,
+ ide_pm_state_start_resume = 1000,
+};
+
+/*
+ * Subdrivers support.
+ */
+typedef struct ide_driver_s {
+ struct module *owner;
+ const char *name;
+ const char *version;
+ u8 media;
+ unsigned busy : 1;
+ unsigned supports_dsc_overlap : 1;
+ int (*cleanup)(ide_drive_t *);
+ ide_startstop_t (*do_request)(ide_drive_t *, struct request *, sector_t);
+ int (*end_request)(ide_drive_t *, int, int);
+ ide_startstop_t (*error)(ide_drive_t *, struct request *rq, u8, u8);
+ ide_startstop_t (*abort)(ide_drive_t *, struct request *rq);
+ int (*ioctl)(ide_drive_t *, struct inode *, struct file *, unsigned int, unsigned long);
+ ide_proc_entry_t *proc;
+ int (*attach)(ide_drive_t *);
+ void (*ata_prebuilder)(ide_drive_t *);
+ void (*atapi_prebuilder)(ide_drive_t *);
+ struct device_driver gen_driver;
+ struct list_head drives;
+ struct list_head drivers;
+} ide_driver_t;
+
+#define DRIVER(drive) ((drive)->driver)
+
+int generic_ide_ioctl(ide_drive_t *, struct file *, struct block_device *, unsigned, unsigned long);
+
+/*
+ * ide_hwifs[] is the master data structure used to keep track
+ * of just about everything in ide.c. Whenever possible, routines
+ * should be using pointers to a drive (ide_drive_t *) or
+ * pointers to a hwif (ide_hwif_t *), rather than indexing this
+ * structure directly (the allocation/layout may change!).
+ *
+ */
+#ifndef _IDE_C
+extern ide_hwif_t ide_hwifs[]; /* master data repository */
+#endif
+extern int noautodma;
+
+extern int ide_end_request (ide_drive_t *drive, int uptodate, int nrsecs);
+extern int __ide_end_request (ide_drive_t *drive, struct request *rq, int uptodate, int nrsecs);
+
+/*
+ * This is used on exit from the driver to designate the next irq handler
+ * and also to start the safety timer.
+ */
+extern void ide_set_handler (ide_drive_t *drive, ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry);
+
+/*
+ * This is used on exit from the driver to designate the next irq handler
+ * and start the safety time safely and atomically from the IRQ handler
+ * with respect to the command issue (which it also does)
+ */
+extern void ide_execute_command(ide_drive_t *, task_ioreg_t cmd, ide_handler_t *, unsigned int, ide_expiry_t *);
+
+ide_startstop_t __ide_error(ide_drive_t *, struct request *, u8, u8);
+
+/*
+ * ide_error() takes action based on the error returned by the controller.
+ * The caller should return immediately after invoking this.
+ *
+ * (drive, msg, status)
+ */
+ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, byte stat);
+
+ide_startstop_t __ide_abort(ide_drive_t *, struct request *);
+
+/*
+ * Abort a running command on the controller triggering the abort
+ * from a host side, non error situation
+ * (drive, msg)
+ */
+extern ide_startstop_t ide_abort(ide_drive_t *, const char *);
+
+extern void ide_fix_driveid(struct hd_driveid *);
+/*
+ * ide_fixstring() cleans up and (optionally) byte-swaps a text string,
+ * removing leading/trailing blanks and compressing internal blanks.
+ * It is primarily used to tidy up the model name/number fields as
+ * returned by the WIN_[P]IDENTIFY commands.
+ *
+ * (s, bytecount, byteswap)
+ */
+extern void ide_fixstring(u8 *, const int, const int);
+
+/*
+ * This routine busy-waits for the drive status to be not "busy".
+ * It then checks the status for all of the "good" bits and none
+ * of the "bad" bits, and if all is okay it returns 0. All other
+ * cases return 1 after doing "*startstop = ide_error()", and the
+ * caller should return the updated value of "startstop" in this case.
+ * "startstop" is unchanged when the function returns 0;
+ * (startstop, drive, good, bad, timeout)
+ */
+extern int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long);
+
+/*
+ * Start a reset operation for an IDE interface.
+ * The caller should return immediately after invoking this.
+ */
+extern ide_startstop_t ide_do_reset (ide_drive_t *);
+
+/*
+ * This function is intended to be used prior to invoking ide_do_drive_cmd().
+ */
+extern void ide_init_drive_cmd (struct request *rq);
+
+/*
+ * this function returns error location sector offset in case of a write error
+ */
+extern u64 ide_get_error_location(ide_drive_t *, char *);
+
+/*
+ * "action" parameter type for ide_do_drive_cmd() below.
+ */
+typedef enum {
+ ide_wait, /* insert rq at end of list, and wait for it */
+ ide_next, /* insert rq immediately after current request */
+ ide_preempt, /* insert rq in front of current request */
+ ide_head_wait, /* insert rq in front of current request and wait for it */
+ ide_end /* insert rq at end of list, but don't wait for it */
+} ide_action_t;
+
+/*
+ * This function issues a special IDE device request
+ * onto the request queue.
+ *
+ * If action is ide_wait, then the rq is queued at the end of the
+ * request queue, and the function sleeps until it has been processed.
+ * This is for use when invoked from an ioctl handler.
+ *
+ * If action is ide_preempt, then the rq is queued at the head of
+ * the request queue, displacing the currently-being-processed
+ * request and this function returns immediately without waiting
+ * for the new rq to be completed. This is VERY DANGEROUS, and is
+ * intended for careful use by the ATAPI tape/cdrom driver code.
+ *
+ * If action is ide_next, then the rq is queued immediately after
+ * the currently-being-processed-request (if any), and the function
+ * returns without waiting for the new rq to be completed. As above,
+ * This is VERY DANGEROUS, and is intended for careful use by the
+ * ATAPI tape/cdrom driver code.
+ *
+ * If action is ide_end, then the rq is queued at the end of the
+ * request queue, and the function returns immediately without waiting
+ * for the new rq to be completed. This is again intended for careful
+ * use by the ATAPI tape/cdrom driver code.
+ */
+extern int ide_do_drive_cmd(ide_drive_t *, struct request *, ide_action_t);
+
+/*
+ * Clean up after success/failure of an explicit drive cmd.
+ * stat/err are used only when (HWGROUP(drive)->rq->cmd == IDE_DRIVE_CMD).
+ * stat/err are used only when (HWGROUP(drive)->rq->cmd == IDE_DRIVE_TASK_MASK).
+ *
+ * (ide_drive_t *drive, u8 stat, u8 err)
+ */
+extern void ide_end_drive_cmd(ide_drive_t *, u8, u8);
+
+/*
+ * Issue ATA command and wait for completion.
+ * Use for implementing commands in kernel
+ *
+ * (ide_drive_t *drive, u8 cmd, u8 nsect, u8 feature, u8 sectors, u8 *buf)
+ */
+extern int ide_wait_cmd(ide_drive_t *, u8, u8, u8, u8, u8 *);
+
+typedef struct ide_task_s {
+/*
+ * struct hd_drive_task_hdr tf;
+ * task_struct_t tf;
+ * struct hd_drive_hob_hdr hobf;
+ * hob_struct_t hobf;
+ */
+ task_ioreg_t tfRegister[8];
+ task_ioreg_t hobRegister[8];
+ ide_reg_valid_t tf_out_flags;
+ ide_reg_valid_t tf_in_flags;
+ int data_phase;
+ int command_type;
+ ide_pre_handler_t *prehandler;
+ ide_handler_t *handler;
+ struct request *rq; /* copy of request */
+ void *special; /* valid_t generally */
+} ide_task_t;
+
+extern u32 ide_read_24(ide_drive_t *);
+
+extern void SELECT_DRIVE(ide_drive_t *);
+extern void SELECT_INTERRUPT(ide_drive_t *);
+extern void SELECT_MASK(ide_drive_t *, int);
+extern void QUIRK_LIST(ide_drive_t *);
+
+extern int drive_is_ready(ide_drive_t *);
+extern int wait_for_ready(ide_drive_t *, int /* timeout */);
+
+/*
+ * taskfile io for disks for now...and builds request from ide_ioctl
+ */
+extern ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *);
+
+/*
+ * Special Flagged Register Validation Caller
+ */
+extern ide_startstop_t flagged_taskfile(ide_drive_t *, ide_task_t *);
+
+extern ide_startstop_t set_multmode_intr(ide_drive_t *);
+extern ide_startstop_t set_geometry_intr(ide_drive_t *);
+extern ide_startstop_t recal_intr(ide_drive_t *);
+extern ide_startstop_t task_no_data_intr(ide_drive_t *);
+extern ide_startstop_t task_in_intr(ide_drive_t *);
+extern ide_startstop_t pre_task_out_intr(ide_drive_t *, struct request *);
+
+extern int ide_raw_taskfile(ide_drive_t *, ide_task_t *, u8 *);
+
+int ide_taskfile_ioctl(ide_drive_t *, unsigned int, unsigned long);
+int ide_cmd_ioctl(ide_drive_t *, unsigned int, unsigned long);
+int ide_task_ioctl(ide_drive_t *, unsigned int, unsigned long);
+
+extern int system_bus_clock(void);
+
+extern int ide_driveid_update(ide_drive_t *);
+extern int ide_ata66_check(ide_drive_t *, ide_task_t *);
+extern int ide_config_drive_speed(ide_drive_t *, u8);
+extern u8 eighty_ninty_three (ide_drive_t *);
+extern int set_transfer(ide_drive_t *, ide_task_t *);
+extern int taskfile_lib_get_identify(ide_drive_t *drive, u8 *);
+
+extern int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout);
+
+/*
+ * ide_stall_queue() can be used by a drive to give excess bandwidth back
+ * to the hwgroup by sleeping for timeout jiffies.
+ */
+extern void ide_stall_queue(ide_drive_t *drive, unsigned long timeout);
+
+extern int ide_spin_wait_hwgroup(ide_drive_t *);
+extern void ide_timer_expiry(unsigned long);
+extern irqreturn_t ide_intr(int irq, void *dev_id, struct pt_regs *regs);
+extern void do_ide_request(request_queue_t *);
+extern void ide_init_subdrivers(void);
+
+void ide_init_disk(struct gendisk *, ide_drive_t *);
+
+extern int ata_attach(ide_drive_t *);
+
+extern int ideprobe_init(void);
+
+extern void ide_scan_pcibus(int scan_direction) __init;
+extern int ide_pci_register_driver(struct pci_driver *driver);
+extern void ide_pci_unregister_driver(struct pci_driver *driver);
+void ide_pci_setup_ports(struct pci_dev *, struct ide_pci_device_s *, int, ata_index_t *);
+extern void ide_setup_pci_noise (struct pci_dev *dev, struct ide_pci_device_s *d);
+
+extern void default_hwif_iops(ide_hwif_t *);
+extern void default_hwif_mmiops(ide_hwif_t *);
+extern void default_hwif_transport(ide_hwif_t *);
+
+int ide_register_driver(ide_driver_t *driver);
+void ide_unregister_driver(ide_driver_t *driver);
+int ide_register_subdriver(ide_drive_t *, ide_driver_t *);
+int ide_unregister_subdriver (ide_drive_t *drive);
+int ide_replace_subdriver(ide_drive_t *drive, const char *driver);
+
+#define ON_BOARD 1
+#define NEVER_BOARD 0
+
+#ifdef CONFIG_BLK_DEV_OFFBOARD
+# define OFF_BOARD ON_BOARD
+#else /* CONFIG_BLK_DEV_OFFBOARD */
+# define OFF_BOARD NEVER_BOARD
+#endif /* CONFIG_BLK_DEV_OFFBOARD */
+
+#define NODMA 0
+#define NOAUTODMA 1
+#define AUTODMA 2
+
+typedef struct ide_pci_enablebit_s {
+ u8 reg; /* byte pci reg holding the enable-bit */
+ u8 mask; /* mask to isolate the enable-bit */
+ u8 val; /* value of masked reg when "enabled" */
+} ide_pci_enablebit_t;
+
+enum {
+ /* Uses ISA control ports not PCI ones. */
+ IDEPCI_FLAG_ISA_PORTS = (1 << 0),
+ IDEPCI_FLAG_FORCE_PDC = (1 << 1),
+};
+
+typedef struct ide_pci_device_s {
+ char *name;
+ int (*init_setup)(struct pci_dev *, struct ide_pci_device_s *);
+ void (*init_setup_dma)(struct pci_dev *, struct ide_pci_device_s *, ide_hwif_t *);
+ unsigned int (*init_chipset)(struct pci_dev *, const char *);
+ void (*init_iops)(ide_hwif_t *);
+ void (*init_hwif)(ide_hwif_t *);
+ void (*init_dma)(ide_hwif_t *, unsigned long);
+ void (*fixup)(ide_hwif_t *);
+ u8 channels;
+ u8 autodma;
+ ide_pci_enablebit_t enablebits[2];
+ u8 bootable;
+ unsigned int extra;
+ struct ide_pci_device_s *next;
+ u8 flags;
+} ide_pci_device_t;
+
+extern int ide_setup_pci_device(struct pci_dev *, ide_pci_device_t *);
+extern int ide_setup_pci_devices(struct pci_dev *, struct pci_dev *, ide_pci_device_t *);
+
+void ide_map_sg(ide_drive_t *, struct request *);
+void ide_init_sg_cmd(ide_drive_t *, struct request *);
+
+#define BAD_DMA_DRIVE 0
+#define GOOD_DMA_DRIVE 1
+
+#ifdef CONFIG_BLK_DEV_IDEDMA
+int __ide_dma_bad_drive(ide_drive_t *);
+int __ide_dma_good_drive(ide_drive_t *);
+int ide_use_dma(ide_drive_t *);
+int __ide_dma_off(ide_drive_t *);
+void ide_dma_verbose(ide_drive_t *);
+ide_startstop_t ide_dma_intr(ide_drive_t *);
+
+#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
+extern int ide_build_sglist(ide_drive_t *, struct request *);
+extern int ide_build_dmatable(ide_drive_t *, struct request *);
+extern void ide_destroy_dmatable(ide_drive_t *);
+extern int ide_release_dma(ide_hwif_t *);
+extern void ide_setup_dma(ide_hwif_t *, unsigned long, unsigned int);
+
+extern int __ide_dma_host_off(ide_drive_t *);
+extern int __ide_dma_off_quietly(ide_drive_t *);
+extern int __ide_dma_host_on(ide_drive_t *);
+extern int __ide_dma_on(ide_drive_t *);
+extern int __ide_dma_check(ide_drive_t *);
+extern int ide_dma_setup(ide_drive_t *);
+extern void ide_dma_start(ide_drive_t *);
+extern int __ide_dma_end(ide_drive_t *);
+extern int __ide_dma_lostirq(ide_drive_t *);
+extern int __ide_dma_timeout(ide_drive_t *);
+#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */
+
+#else
+static inline int ide_use_dma(ide_drive_t *drive) { return 0; }
+static inline int __ide_dma_off(ide_drive_t *drive) { return 0; }
+static inline void ide_dma_verbose(ide_drive_t *drive) { ; }
+#endif /* CONFIG_BLK_DEV_IDEDMA */
+
+#ifndef CONFIG_BLK_DEV_IDEDMA_PCI
+static inline void ide_release_dma(ide_hwif_t *drive) {;}
+#endif
+
+extern int ide_hwif_request_regions(ide_hwif_t *hwif);
+extern void ide_hwif_release_regions(ide_hwif_t* hwif);
+extern void ide_unregister (unsigned int index);
+
+void ide_register_region(struct gendisk *);
+void ide_unregister_region(struct gendisk *);
+
+void ide_undecoded_slave(ide_hwif_t *);
+
+int probe_hwif_init_with_fixup(ide_hwif_t *, void (*)(ide_hwif_t *));
+extern int probe_hwif_init(ide_hwif_t *);
+
+static inline void *ide_get_hwifdata (ide_hwif_t * hwif)
+{
+ return hwif->hwif_data;
+}
+
+static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data)
+{
+ hwif->hwif_data = data;
+}
+
+/* ide-lib.c */
+extern u8 ide_dma_speed(ide_drive_t *drive, u8 mode);
+extern u8 ide_rate_filter(u8 mode, u8 speed);
+extern int ide_dma_enable(ide_drive_t *drive);
+extern char *ide_xfer_verbose(u8 xfer_rate);
+extern void ide_toggle_bounce(ide_drive_t *drive, int on);
+extern int ide_set_xfer_rate(ide_drive_t *drive, u8 rate);
+
+u8 ide_dump_status(ide_drive_t *, const char *, u8);
+
+typedef struct ide_pio_timings_s {
+ int setup_time; /* Address setup (ns) minimum */
+ int active_time; /* Active pulse (ns) minimum */
+ int cycle_time; /* Cycle time (ns) minimum = (setup + active + recovery) */
+} ide_pio_timings_t;
+
+typedef struct ide_pio_data_s {
+ u8 pio_mode;
+ u8 use_iordy;
+ u8 overridden;
+ u8 blacklisted;
+ unsigned int cycle_time;
+} ide_pio_data_t;
+
+extern u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode, ide_pio_data_t *d);
+extern const ide_pio_timings_t ide_pio_timings[6];
+
+
+extern spinlock_t ide_lock;
+extern struct semaphore ide_cfg_sem;
+/*
+ * Structure locking:
+ *
+ * ide_cfg_sem and ide_lock together protect changes to
+ * ide_hwif_t->{next,hwgroup}
+ * ide_drive_t->next
+ *
+ * ide_hwgroup_t->busy: ide_lock
+ * ide_hwgroup_t->hwif: ide_lock
+ * ide_hwif_t->mate: constant, no locking
+ * ide_drive_t->hwif: constant, no locking
+ */
+
+#define local_irq_set(flags) do { local_save_flags((flags)); local_irq_enable(); } while (0)
+
+extern struct bus_type ide_bus_type;
+
+/* check if CACHE FLUSH (EXT) command is supported (bits defined in ATA-6) */
+#define ide_id_has_flush_cache(id) ((id)->cfs_enable_2 & 0x3000)
+
+/* some Maxtor disks have bit 13 defined incorrectly so check bit 10 too */
+#define ide_id_has_flush_cache_ext(id) \
+ (((id)->cfs_enable_2 & 0x2400) == 0x2400)
+
+#endif /* _IDE_H */