Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 115 insertions, 0 deletions

diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h
new file mode 100644
index 00000000000..b5b58e9c054
--- /dev/null
+++ b/include/linux/if_ether.h
@@ -0,0 +1,115 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for the Ethernet IEEE 802.3 interface.
+ *
+ * Version:	@(#)if_ether.h	1.0.1a	02/08/94
+ *
+ * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *		Donald Becker, <becker@super.org>
+ *		Alan Cox, <alan@redhat.com>
+ *		Steve Whitehouse, <gw7rrm@eeshack3.swan.ac.uk>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+ 
+#ifndef _LINUX_IF_ETHER_H
+#define _LINUX_IF_ETHER_H
+
+/*
+ *	IEEE 802.3 Ethernet magic constants.  The frame sizes omit the preamble
+ *	and FCS/CRC (frame check sequence). 
+ */
+
+#define ETH_ALEN	6		/* Octets in one ethernet addr	 */
+#define ETH_HLEN	14		/* Total octets in header.	 */
+#define ETH_ZLEN	60		/* Min. octets in frame sans FCS */
+#define ETH_DATA_LEN	1500		/* Max. octets in payload	 */
+#define ETH_FRAME_LEN	1514		/* Max. octets in frame sans FCS */
+
+/*
+ *	These are the defined Ethernet Protocol ID's.
+ */
+
+#define ETH_P_LOOP	0x0060		/* Ethernet Loopback packet	*/
+#define ETH_P_PUP	0x0200		/* Xerox PUP packet		*/
+#define ETH_P_PUPAT	0x0201		/* Xerox PUP Addr Trans packet	*/
+#define ETH_P_IP	0x0800		/* Internet Protocol packet	*/
+#define ETH_P_X25	0x0805		/* CCITT X.25			*/
+#define ETH_P_ARP	0x0806		/* Address Resolution packet	*/
+#define	ETH_P_BPQ	0x08FF		/* G8BPQ AX.25 Ethernet Packet	[ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_IEEEPUP	0x0a00		/* Xerox IEEE802.3 PUP packet */
+#define ETH_P_IEEEPUPAT	0x0a01		/* Xerox IEEE802.3 PUP Addr Trans packet */
+#define ETH_P_DEC       0x6000          /* DEC Assigned proto           */
+#define ETH_P_DNA_DL    0x6001          /* DEC DNA Dump/Load            */
+#define ETH_P_DNA_RC    0x6002          /* DEC DNA Remote Console       */
+#define ETH_P_DNA_RT    0x6003          /* DEC DNA Routing              */
+#define ETH_P_LAT       0x6004          /* DEC LAT                      */
+#define ETH_P_DIAG      0x6005          /* DEC Diagnostics              */
+#define ETH_P_CUST      0x6006          /* DEC Customer use             */
+#define ETH_P_SCA       0x6007          /* DEC Systems Comms Arch       */
+#define ETH_P_RARP      0x8035		/* Reverse Addr Res packet	*/
+#define ETH_P_ATALK	0x809B		/* Appletalk DDP		*/
+#define ETH_P_AARP	0x80F3		/* Appletalk AARP		*/
+#define ETH_P_8021Q	0x8100          /* 802.1Q VLAN Extended Header  */
+#define ETH_P_IPX	0x8137		/* IPX over DIX			*/
+#define ETH_P_IPV6	0x86DD		/* IPv6 over bluebook		*/
+#define ETH_P_WCCP	0x883E		/* Web-cache coordination protocol
+					 * defined in draft-wilson-wrec-wccp-v2-00.txt */
+#define ETH_P_PPP_DISC	0x8863		/* PPPoE discovery messages     */
+#define ETH_P_PPP_SES	0x8864		/* PPPoE session messages	*/
+#define ETH_P_MPLS_UC	0x8847		/* MPLS Unicast traffic		*/
+#define ETH_P_MPLS_MC	0x8848		/* MPLS Multicast traffic	*/
+#define ETH_P_ATMMPOA	0x884c		/* MultiProtocol Over ATM	*/
+#define ETH_P_ATMFATE	0x8884		/* Frame-based ATM Transport
+					 * over Ethernet
+					 */
+#define ETH_P_AOE	0x88A2		/* ATA over Ethernet		*/
+
+/*
+ *	Non DIX types. Won't clash for 1500 types.
+ */
+ 
+#define ETH_P_802_3	0x0001		/* Dummy type for 802.3 frames  */
+#define ETH_P_AX25	0x0002		/* Dummy protocol id for AX.25  */
+#define ETH_P_ALL	0x0003		/* Every packet (be careful!!!) */
+#define ETH_P_802_2	0x0004		/* 802.2 frames 		*/
+#define ETH_P_SNAP	0x0005		/* Internal only		*/
+#define ETH_P_DDCMP     0x0006          /* DEC DDCMP: Internal only     */
+#define ETH_P_WAN_PPP   0x0007          /* Dummy type for WAN PPP frames*/
+#define ETH_P_PPP_MP    0x0008          /* Dummy type for PPP MP frames */
+#define ETH_P_LOCALTALK 0x0009		/* Localtalk pseudo type 	*/
+#define ETH_P_PPPTALK	0x0010		/* Dummy type for Atalk over PPP*/
+#define ETH_P_TR_802_2	0x0011		/* 802.2 frames 		*/
+#define ETH_P_MOBITEX	0x0015		/* Mobitex (kaz@cafe.net)	*/
+#define ETH_P_CONTROL	0x0016		/* Card specific control frames */
+#define ETH_P_IRDA	0x0017		/* Linux-IrDA			*/
+#define ETH_P_ECONET	0x0018		/* Acorn Econet			*/
+#define ETH_P_HDLC	0x0019		/* HDLC frames			*/
+#define ETH_P_ARCNET	0x001A		/* 1A for ArcNet :-)            */
+
+/*
+ *	This is an Ethernet frame header.
+ */
+ 
+struct ethhdr {
+	unsigned char	h_dest[ETH_ALEN];	/* destination eth addr	*/
+	unsigned char	h_source[ETH_ALEN];	/* source ether addr	*/
+	unsigned short	h_proto;		/* packet type ID field	*/
+} __attribute__((packed));
+
+#ifdef __KERNEL__
+#include <linux/skbuff.h>
+
+static inline struct ethhdr *eth_hdr(const struct sk_buff *skb)
+{
+	return (struct ethhdr *)skb->mac.raw;
+}
+#endif
+
+#endif	/* _LINUX_IF_ETHER_H */