Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device-tree updates, take 2, from Olof Johansson:
 "This branch contains device-tree updates for the SPEAr platform.  They
  had dependencies on earlier branches from this merge window, which is
  why they were broken out in a separate branch."

* tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: SPEAr3xx: Shirq: Move shirq controller out of plat/
  ARM: SPEAr320: DT: Add SPEAr 320 HMI board support
  ARM: SPEAr3xx: DT: add shirq node for interrupt multiplexor
  ARM: SPEAr3xx: shirq: simplify and move the shared irq multiplexor to DT
  ARM: SPEAr1310: Fix AUXDATA for compact flash controller
  ARM: SPEAr13xx: Remove fields not required for ssp controller
  ARM: SPEAr1310: Move 1310 specific misc register into machine specific files
  ARM: SPEAr: DT: Update device nodes
  ARM: SPEAr: DT: add uart state to fix warning
  ARM: SPEAr: DT: Modify DT bindings for STMMAC
  ARM: SPEAr: DT: Fix existing DT support
  ARM: SPEAr: DT: Update partition info for MTD devices
  ARM: SPEAr: DT: Update pinctrl list
  ARM: SPEAr13xx: DT: Add spics gpio controller nodes

1 files changed, 64 insertions, 0 deletions

diff --git a/include/linux/irqchip/spear-shirq.h b/include/linux/irqchip/spear-shirq.h
new file mode 100644
index 00000000000..c8be16d213a
--- /dev/null
+++ b/include/linux/irqchip/spear-shirq.h
@@ -0,0 +1,64 @@
+/*
+ * SPEAr platform shared irq layer header file
+ *
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Viresh Kumar <viresh.linux@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __SPEAR_SHIRQ_H
+#define __SPEAR_SHIRQ_H
+
+#include <linux/irq.h>
+#include <linux/types.h>
+
+/*
+ * struct shirq_regs: shared irq register configuration
+ *
+ * enb_reg: enable register offset
+ * reset_to_enb: val 1 indicates, we need to clear bit for enabling interrupt
+ * status_reg: status register offset
+ * status_reg_mask: status register valid mask
+ * clear_reg: clear register offset
+ * reset_to_clear: val 1 indicates, we need to clear bit for clearing interrupt
+ */
+struct shirq_regs {
+	u32 enb_reg;
+	u32 reset_to_enb;
+	u32 status_reg;
+	u32 clear_reg;
+	u32 reset_to_clear;
+};
+
+/*
+ * struct spear_shirq: shared irq structure
+ *
+ * irq: hardware irq number
+ * irq_base: base irq in linux domain
+ * irq_nr: no. of shared interrupts in a particular block
+ * irq_bit_off: starting bit offset in the status register
+ * invalid_irq: irq group is currently disabled
+ * base: base address of shared irq register
+ * regs: register configuration for shared irq block
+ */
+struct spear_shirq {
+	u32 irq;
+	u32 irq_base;
+	u32 irq_nr;
+	u32 irq_bit_off;
+	int invalid_irq;
+	void __iomem *base;
+	struct shirq_regs regs;
+};
+
+int __init spear300_shirq_of_init(struct device_node *np,
+		struct device_node *parent);
+int __init spear310_shirq_of_init(struct device_node *np,
+		struct device_node *parent);
+int __init spear320_shirq_of_init(struct device_node *np,
+		struct device_node *parent);
+
+#endif /* __SPEAR_SHIRQ_H */