summaryrefslogtreecommitdiffstats
path: root/include/linux/ixjuser.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /include/linux/ixjuser.h
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'include/linux/ixjuser.h')
-rw-r--r--include/linux/ixjuser.h722
1 files changed, 722 insertions, 0 deletions
diff --git a/include/linux/ixjuser.h b/include/linux/ixjuser.h
new file mode 100644
index 00000000000..88121166d71
--- /dev/null
+++ b/include/linux/ixjuser.h
@@ -0,0 +1,722 @@
+#ifndef __LINUX_IXJUSER_H
+#define __LINUX_IXJUSER_H
+
+/******************************************************************************
+ *
+ * ixjuser.h
+ *
+ * Device Driver for Quicknet Technologies, Inc.'s Telephony cards
+ * including the Internet PhoneJACK, Internet PhoneJACK Lite,
+ * Internet PhoneJACK PCI, Internet LineJACK, Internet PhoneCARD and
+ * SmartCABLE
+ *
+ * (c) Copyright 1999-2001 Quicknet Technologies, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Author: Ed Okerson, <eokerson@quicknet.net>
+ *
+ * Contributors: Greg Herlein, <gherlein@quicknet.net>
+ * David W. Erhart, <derhart@quicknet.net>
+ * John Sellers, <jsellers@quicknet.net>
+ * Mike Preston, <mpreston@quicknet.net>
+ *
+ * More information about the hardware related to this driver can be found
+ * at our website: http://www.quicknet.net
+ *
+ * Fixes:
+ *
+ * IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY FOR
+ * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT
+ * OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF QUICKNET
+ * TECHNOLOGIES, INC.HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * QUICKNET TECHNOLOGIES, INC. SPECIFICALLY DISCLAIMS ANY WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
+ * ON AN "AS IS" BASIS, AND QUICKNET TECHNOLOGIES, INC. HAS NO OBLIGATION
+ * TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
+ *
+ *****************************************************************************/
+
+static char ixjuser_h_rcsid[] = "$Id: ixjuser.h,v 4.1 2001/08/05 00:17:37 craigs Exp $";
+
+#include <linux/telephony.h>
+
+
+/******************************************************************************
+*
+* IOCTL's used for the Quicknet Telephony Cards
+*
+* If you use the IXJCTL_TESTRAM command, the card must be power cycled to
+* reset the SRAM values before futher use.
+*
+******************************************************************************/
+
+#define IXJCTL_DSP_RESET _IO ('q', 0xC0)
+
+#define IXJCTL_RING PHONE_RING
+#define IXJCTL_HOOKSTATE PHONE_HOOKSTATE
+#define IXJCTL_MAXRINGS PHONE_MAXRINGS
+#define IXJCTL_RING_CADENCE PHONE_RING_CADENCE
+#define IXJCTL_RING_START PHONE_RING_START
+#define IXJCTL_RING_STOP PHONE_RING_STOP
+
+#define IXJCTL_CARDTYPE _IOR ('q', 0xC1, int)
+#define IXJCTL_SERIAL _IOR ('q', 0xC2, int)
+#define IXJCTL_DSP_TYPE _IOR ('q', 0xC3, int)
+#define IXJCTL_DSP_VERSION _IOR ('q', 0xC4, int)
+#define IXJCTL_VERSION _IOR ('q', 0xDA, char *)
+#define IXJCTL_DSP_IDLE _IO ('q', 0xC5)
+#define IXJCTL_TESTRAM _IO ('q', 0xC6)
+
+/******************************************************************************
+*
+* This group of IOCTLs deal with the record settings of the DSP
+*
+* The IXJCTL_REC_DEPTH command sets the internal buffer depth of the DSP.
+* Setting a lower depth reduces latency, but increases the demand of the
+* application to service the driver without frame loss. The DSP has 480
+* bytes of physical buffer memory for the record channel so the true
+* maximum limit is determined by how many frames will fit in the buffer.
+*
+* 1 uncompressed (480 byte) 16-bit linear frame.
+* 2 uncompressed (240 byte) 8-bit A-law/mu-law frames.
+* 15 TrueSpeech 8.5 frames.
+* 20 TrueSpeech 6.3,5.3,4.8 or 4.1 frames.
+*
+* The default in the driver is currently set to 2 frames.
+*
+* The IXJCTL_REC_VOLUME and IXJCTL_PLAY_VOLUME commands both use a Q8
+* number as a parameter, 0x100 scales the signal by 1.0, 0x200 scales the
+* signal by 2.0, 0x80 scales the signal by 0.5. No protection is given
+* against over-scaling, if the multiplication factor times the input
+* signal exceeds 16 bits, overflow distortion will occur. The default
+* setting is 0x100 (1.0).
+*
+* The IXJCTL_REC_LEVEL returns the average signal level (not r.m.s.) on
+* the most recently recorded frame as a 16 bit value.
+******************************************************************************/
+
+#define IXJCTL_REC_CODEC PHONE_REC_CODEC
+#define IXJCTL_REC_START PHONE_REC_START
+#define IXJCTL_REC_STOP PHONE_REC_STOP
+#define IXJCTL_REC_DEPTH PHONE_REC_DEPTH
+#define IXJCTL_FRAME PHONE_FRAME
+#define IXJCTL_REC_VOLUME PHONE_REC_VOLUME
+#define IXJCTL_REC_LEVEL PHONE_REC_LEVEL
+
+typedef enum {
+ f300_640 = 4, f300_500, f1100, f350, f400, f480, f440, f620, f20_50,
+ f133_200, f300, f300_420, f330, f300_425, f330_440, f340, f350_400,
+ f350_440, f350_450, f360, f380_420, f392, f400_425, f400_440, f400_450,
+ f420, f425, f425_450, f425_475, f435, f440_450, f440_480, f445, f450,
+ f452, f475, f480_620, f494, f500, f520, f523, f525, f540_660, f587,
+ f590, f600, f660, f700, f740, f750, f750_1450, f770, f800, f816, f850,
+ f857_1645, f900, f900_1300, f935_1215, f941_1477, f942, f950, f950_1400,
+ f975, f1000, f1020, f1050, f1100_1750, f1140, f1200, f1209, f1330, f1336,
+ lf1366, f1380, f1400, f1477, f1600, f1633_1638, f1800, f1860
+} IXJ_FILTER_FREQ;
+
+typedef struct {
+ unsigned int filter;
+ IXJ_FILTER_FREQ freq;
+ char enable;
+} IXJ_FILTER;
+
+typedef struct {
+ char enable;
+ char en_filter;
+ unsigned int filter;
+ unsigned int on1;
+ unsigned int off1;
+ unsigned int on2;
+ unsigned int off2;
+ unsigned int on3;
+ unsigned int off3;
+} IXJ_FILTER_CADENCE;
+
+#define IXJCTL_SET_FILTER _IOW ('q', 0xC7, IXJ_FILTER *)
+#define IXJCTL_SET_FILTER_RAW _IOW ('q', 0xDD, IXJ_FILTER_RAW *)
+#define IXJCTL_GET_FILTER_HIST _IOW ('q', 0xC8, int)
+#define IXJCTL_FILTER_CADENCE _IOW ('q', 0xD6, IXJ_FILTER_CADENCE *)
+#define IXJCTL_PLAY_CID _IO ('q', 0xD7)
+/******************************************************************************
+*
+* This IOCTL allows you to reassign values in the tone index table. The
+* tone table has 32 entries (0 - 31), but the driver only allows entries
+* 13 - 27 to be modified, entry 0 is reserved for silence and 1 - 12 are
+* the standard DTMF digits and 28 - 31 are the DTMF tones for A, B, C & D.
+* The positions used internally for Call Progress Tones are as follows:
+* Dial Tone - 25
+* Ring Back - 26
+* Busy Signal - 27
+*
+* The freq values are calculated as:
+* freq = cos(2 * PI * frequency / 8000)
+*
+* The most commonly needed values are already calculated and listed in the
+* enum IXJ_TONE_FREQ. Each tone index can have two frequencies with
+* different gains, if you are only using a single frequency set the unused
+* one to 0.
+*
+* The gain values range from 0 to 15 indicating +6dB to -24dB in 2dB
+* increments.
+*
+******************************************************************************/
+
+typedef enum {
+ hz20 = 0x7ffa,
+ hz50 = 0x7fe5,
+ hz133 = 0x7f4c,
+ hz200 = 0x7e6b,
+ hz261 = 0x7d50, /* .63 C1 */
+ hz277 = 0x7cfa, /* .18 CS1 */
+ hz293 = 0x7c9f, /* .66 D1 */
+ hz300 = 0x7c75,
+ hz311 = 0x7c32, /* .13 DS1 */
+ hz329 = 0x7bbf, /* .63 E1 */
+ hz330 = 0x7bb8,
+ hz340 = 0x7b75,
+ hz349 = 0x7b37, /* .23 F1 */
+ hz350 = 0x7b30,
+ hz360 = 0x7ae9,
+ hz369 = 0x7aa8, /* .99 FS1 */
+ hz380 = 0x7a56,
+ hz392 = 0x79fa, /* .00 G1 */
+ hz400 = 0x79bb,
+ hz415 = 0x7941, /* .30 GS1 */
+ hz420 = 0x7918,
+ hz425 = 0x78ee,
+ hz435 = 0x7899,
+ hz440 = 0x786d, /* .00 A1 */
+ hz445 = 0x7842,
+ hz450 = 0x7815,
+ hz452 = 0x7803,
+ hz466 = 0x7784, /* .16 AS1 */
+ hz475 = 0x7731,
+ hz480 = 0x7701,
+ hz493 = 0x7685, /* .88 B1 */
+ hz494 = 0x767b,
+ hz500 = 0x7640,
+ hz520 = 0x7578,
+ hz523 = 0x7559, /* .25 C2 */
+ hz525 = 0x7544,
+ hz540 = 0x74a7,
+ hz554 = 0x7411, /* .37 CS2 */
+ hz587 = 0x72a1, /* .33 D2 */
+ hz590 = 0x727f,
+ hz600 = 0x720b,
+ hz620 = 0x711e,
+ hz622 = 0x7106, /* .25 DS2 */
+ hz659 = 0x6f3b, /* .26 E2 */
+ hz660 = 0x6f2e,
+ hz698 = 0x6d3d, /* .46 F2 */
+ hz700 = 0x6d22,
+ hz739 = 0x6b09, /* .99 FS2 */
+ hz740 = 0x6afa,
+ hz750 = 0x6a6c,
+ hz770 = 0x694b,
+ hz783 = 0x688b, /* .99 G2 */
+ hz800 = 0x678d,
+ hz816 = 0x6698,
+ hz830 = 0x65bf, /* .61 GS2 */
+ hz850 = 0x6484,
+ hz857 = 0x6414,
+ hz880 = 0x629f, /* .00 A2 */
+ hz900 = 0x6154,
+ hz932 = 0x5f35, /* .33 AS2 */
+ hz935 = 0x5f01,
+ hz941 = 0x5e9a,
+ hz942 = 0x5e88,
+ hz950 = 0x5dfd,
+ hz975 = 0x5c44,
+ hz1000 = 0x5a81,
+ hz1020 = 0x5912,
+ hz1050 = 0x56e2,
+ hz1100 = 0x5320,
+ hz1140 = 0x5007,
+ hz1200 = 0x4b3b,
+ hz1209 = 0x4a80,
+ hz1215 = 0x4a02,
+ hz1250 = 0x471c,
+ hz1300 = 0x42e0,
+ hz1330 = 0x4049,
+ hz1336 = 0x3fc4,
+ hz1366 = 0x3d22,
+ hz1380 = 0x3be4,
+ hz1400 = 0x3a1b,
+ hz1450 = 0x3596,
+ hz1477 = 0x331c,
+ hz1500 = 0x30fb,
+ hz1600 = 0x278d,
+ hz1633 = 0x2462,
+ hz1638 = 0x23e7,
+ hz1645 = 0x233a,
+ hz1750 = 0x18f8,
+ hz1800 = 0x1405,
+ hz1860 = 0xe0b,
+ hz2100 = 0xf5f6,
+ hz2130 = 0xf2f5,
+ hz2450 = 0xd3b3,
+ hz2750 = 0xb8e4
+} IXJ_FREQ;
+
+typedef enum {
+ C1 = hz261,
+ CS1 = hz277,
+ D1 = hz293,
+ DS1 = hz311,
+ E1 = hz329,
+ F1 = hz349,
+ FS1 = hz369,
+ G1 = hz392,
+ GS1 = hz415,
+ A1 = hz440,
+ AS1 = hz466,
+ B1 = hz493,
+ C2 = hz523,
+ CS2 = hz554,
+ D2 = hz587,
+ DS2 = hz622,
+ E2 = hz659,
+ F2 = hz698,
+ FS2 = hz739,
+ G2 = hz783,
+ GS2 = hz830,
+ A2 = hz880,
+ AS2 = hz932,
+} IXJ_NOTE;
+
+typedef struct {
+ int tone_index;
+ int freq0;
+ int gain0;
+ int freq1;
+ int gain1;
+} IXJ_TONE;
+
+#define IXJCTL_INIT_TONE _IOW ('q', 0xC9, IXJ_TONE *)
+
+/******************************************************************************
+*
+* The IXJCTL_TONE_CADENCE ioctl defines tone sequences used for various
+* Call Progress Tones (CPT). This is accomplished by setting up an array of
+* IXJ_CADENCE_ELEMENT structures that sequentially define the states of
+* the tone sequence. The tone_on_time and tone_off time are in
+* 250 microsecond intervals. A pointer to this array is passed to the
+* driver as the ce element of an IXJ_CADENCE structure. The elements_used
+* must be set to the number of IXJ_CADENCE_ELEMENTS in the array. The
+* termination variable defines what to do at the end of a cadence, the
+* options are to play the cadence once and stop, to repeat the last
+* element of the cadence indefinitely, or to repeat the entire cadence
+* indefinitely. The ce variable is a pointer to the array of IXJ_TONE
+* structures. If the freq0 variable is non-zero, the tone table contents
+* for the tone_index are updated to the frequencies and gains defined. It
+* should be noted that DTMF tones cannot be reassigned, so if DTMF tone
+* table indexs are used in a cadence the frequency and gain variables will
+* be ignored.
+*
+* If the array elements contain frequency parameters the driver will
+* initialize the needed tone table elements and begin playing the tone,
+* there is no preset limit on the number of elements in the cadence. If
+* there is more than one frequency used in the cadence, sequential elements
+* of different frequencies MUST use different tone table indexes. Only one
+* cadence can be played at a time. It is possible to build complex
+* cadences with multiple frequencies using 2 tone table indexes by
+* alternating between them.
+*
+******************************************************************************/
+
+typedef struct {
+ int index;
+ int tone_on_time;
+ int tone_off_time;
+ int freq0;
+ int gain0;
+ int freq1;
+ int gain1;
+} IXJ_CADENCE_ELEMENT;
+
+typedef enum {
+ PLAY_ONCE,
+ REPEAT_LAST_ELEMENT,
+ REPEAT_ALL
+} IXJ_CADENCE_TERM;
+
+typedef struct {
+ int elements_used;
+ IXJ_CADENCE_TERM termination;
+ IXJ_CADENCE_ELEMENT __user *ce;
+} IXJ_CADENCE;
+
+#define IXJCTL_TONE_CADENCE _IOW ('q', 0xCA, IXJ_CADENCE *)
+/******************************************************************************
+*
+* This group of IOCTLs deal with the playback settings of the DSP
+*
+******************************************************************************/
+
+#define IXJCTL_PLAY_CODEC PHONE_PLAY_CODEC
+#define IXJCTL_PLAY_START PHONE_PLAY_START
+#define IXJCTL_PLAY_STOP PHONE_PLAY_STOP
+#define IXJCTL_PLAY_DEPTH PHONE_PLAY_DEPTH
+#define IXJCTL_PLAY_VOLUME PHONE_PLAY_VOLUME
+#define IXJCTL_PLAY_LEVEL PHONE_PLAY_LEVEL
+
+/******************************************************************************
+*
+* This group of IOCTLs deal with the Acoustic Echo Cancellation settings
+* of the DSP
+*
+* Issuing the IXJCTL_AEC_START command with a value of AEC_OFF has the
+* same effect as IXJCTL_AEC_STOP. This is to simplify slider bar
+* controls. IXJCTL_AEC_GET_LEVEL returns the current setting of the AEC.
+******************************************************************************/
+#define IXJCTL_AEC_START _IOW ('q', 0xCB, int)
+#define IXJCTL_AEC_STOP _IO ('q', 0xCC)
+#define IXJCTL_AEC_GET_LEVEL _IO ('q', 0xCD)
+
+#define AEC_OFF 0
+#define AEC_LOW 1
+#define AEC_MED 2
+#define AEC_HIGH 3
+#define AEC_AUTO 4
+#define AEC_AGC 5
+/******************************************************************************
+*
+* Call Progress Tones, DTMF, etc.
+* IXJCTL_DTMF_OOB determines if DTMF signaling is sent as Out-Of-Band
+* only. If you pass a 1, DTMF is suppressed from the audio stream.
+* Tone on and off times are in 250 microsecond intervals so
+* ioctl(ixj1, IXJCTL_SET_TONE_ON_TIME, 360);
+* will set the tone on time of board ixj1 to 360 * 250us = 90ms
+* the default values of tone on and off times is 840 or 210ms
+******************************************************************************/
+
+#define IXJCTL_DTMF_READY PHONE_DTMF_READY
+#define IXJCTL_GET_DTMF PHONE_GET_DTMF
+#define IXJCTL_GET_DTMF_ASCII PHONE_GET_DTMF_ASCII
+#define IXJCTL_DTMF_OOB PHONE_DTMF_OOB
+#define IXJCTL_EXCEPTION PHONE_EXCEPTION
+#define IXJCTL_PLAY_TONE PHONE_PLAY_TONE
+#define IXJCTL_SET_TONE_ON_TIME PHONE_SET_TONE_ON_TIME
+#define IXJCTL_SET_TONE_OFF_TIME PHONE_SET_TONE_OFF_TIME
+#define IXJCTL_GET_TONE_ON_TIME PHONE_GET_TONE_ON_TIME
+#define IXJCTL_GET_TONE_OFF_TIME PHONE_GET_TONE_OFF_TIME
+#define IXJCTL_GET_TONE_STATE PHONE_GET_TONE_STATE
+#define IXJCTL_BUSY PHONE_BUSY
+#define IXJCTL_RINGBACK PHONE_RINGBACK
+#define IXJCTL_DIALTONE PHONE_DIALTONE
+#define IXJCTL_CPT_STOP PHONE_CPT_STOP
+
+/******************************************************************************
+* LineJACK specific IOCTLs
+*
+* The lsb 4 bits of the LED argument represent the state of each of the 4
+* LED's on the LineJACK
+******************************************************************************/
+
+#define IXJCTL_SET_LED _IOW ('q', 0xCE, int)
+#define IXJCTL_MIXER _IOW ('q', 0xCF, int)
+
+/******************************************************************************
+*
+* The master volume controls use attenuation with 32 levels from 0 to -62dB
+* with steps of 2dB each, the defines should be OR'ed together then sent
+* as the parameter to the mixer command to change the mixer settings.
+*
+******************************************************************************/
+#define MIXER_MASTER_L 0x0000
+#define MIXER_MASTER_R 0x0100
+#define ATT00DB 0x00
+#define ATT02DB 0x01
+#define ATT04DB 0x02
+#define ATT06DB 0x03
+#define ATT08DB 0x04
+#define ATT10DB 0x05
+#define ATT12DB 0x06
+#define ATT14DB 0x07
+#define ATT16DB 0x08
+#define ATT18DB 0x09
+#define ATT20DB 0x0A
+#define ATT22DB 0x0B
+#define ATT24DB 0x0C
+#define ATT26DB 0x0D
+#define ATT28DB 0x0E
+#define ATT30DB 0x0F
+#define ATT32DB 0x10
+#define ATT34DB 0x11
+#define ATT36DB 0x12
+#define ATT38DB 0x13
+#define ATT40DB 0x14
+#define ATT42DB 0x15
+#define ATT44DB 0x16
+#define ATT46DB 0x17
+#define ATT48DB 0x18
+#define ATT50DB 0x19
+#define ATT52DB 0x1A
+#define ATT54DB 0x1B
+#define ATT56DB 0x1C
+#define ATT58DB 0x1D
+#define ATT60DB 0x1E
+#define ATT62DB 0x1F
+#define MASTER_MUTE 0x80
+
+/******************************************************************************
+*
+* The input volume controls use gain with 32 levels from +12dB to -50dB
+* with steps of 2dB each, the defines should be OR'ed together then sent
+* as the parameter to the mixer command to change the mixer settings.
+*
+******************************************************************************/
+#define MIXER_PORT_CD_L 0x0600
+#define MIXER_PORT_CD_R 0x0700
+#define MIXER_PORT_LINE_IN_L 0x0800
+#define MIXER_PORT_LINE_IN_R 0x0900
+#define MIXER_PORT_POTS_REC 0x0C00
+#define MIXER_PORT_MIC 0x0E00
+
+#define GAIN12DB 0x00
+#define GAIN10DB 0x01
+#define GAIN08DB 0x02
+#define GAIN06DB 0x03
+#define GAIN04DB 0x04
+#define GAIN02DB 0x05
+#define GAIN00DB 0x06
+#define GAIN_02DB 0x07
+#define GAIN_04DB 0x08
+#define GAIN_06DB 0x09
+#define GAIN_08DB 0x0A
+#define GAIN_10DB 0x0B
+#define GAIN_12DB 0x0C
+#define GAIN_14DB 0x0D
+#define GAIN_16DB 0x0E
+#define GAIN_18DB 0x0F
+#define GAIN_20DB 0x10
+#define GAIN_22DB 0x11
+#define GAIN_24DB 0x12
+#define GAIN_26DB 0x13
+#define GAIN_28DB 0x14
+#define GAIN_30DB 0x15
+#define GAIN_32DB 0x16
+#define GAIN_34DB 0x17
+#define GAIN_36DB 0x18
+#define GAIN_38DB 0x19
+#define GAIN_40DB 0x1A
+#define GAIN_42DB 0x1B
+#define GAIN_44DB 0x1C
+#define GAIN_46DB 0x1D
+#define GAIN_48DB 0x1E
+#define GAIN_50DB 0x1F
+#define INPUT_MUTE 0x80
+
+/******************************************************************************
+*
+* The POTS volume control use attenuation with 8 levels from 0dB to -28dB
+* with steps of 4dB each, the defines should be OR'ed together then sent
+* as the parameter to the mixer command to change the mixer settings.
+*
+******************************************************************************/
+#define MIXER_PORT_POTS_PLAY 0x0F00
+
+#define POTS_ATT_00DB 0x00
+#define POTS_ATT_04DB 0x01
+#define POTS_ATT_08DB 0x02
+#define POTS_ATT_12DB 0x03
+#define POTS_ATT_16DB 0x04
+#define POTS_ATT_20DB 0x05
+#define POTS_ATT_24DB 0x06
+#define POTS_ATT_28DB 0x07
+#define POTS_MUTE 0x80
+
+/******************************************************************************
+*
+* The DAA controls the interface to the PSTN port. The driver loads the
+* US coefficients by default, so if you live in a different country you
+* need to load the set for your countries phone system.
+*
+******************************************************************************/
+#define IXJCTL_DAA_COEFF_SET _IOW ('q', 0xD0, int)
+
+#define DAA_US 1 /*PITA 8kHz */
+#define DAA_UK 2 /*ISAR34 8kHz */
+#define DAA_FRANCE 3 /* */
+#define DAA_GERMANY 4
+#define DAA_AUSTRALIA 5
+#define DAA_JAPAN 6
+
+/******************************************************************************
+*
+* Use IXJCTL_PORT to set or query the port the card is set to. If the
+* argument is set to PORT_QUERY, the return value of the ioctl will
+* indicate which port is currently in use, otherwise it will change the
+* port.
+*
+******************************************************************************/
+#define IXJCTL_PORT _IOW ('q', 0xD1, int)
+
+#define PORT_QUERY 0
+#define PORT_POTS 1
+#define PORT_PSTN 2
+#define PORT_SPEAKER 3
+#define PORT_HANDSET 4
+
+#define IXJCTL_PSTN_SET_STATE PHONE_PSTN_SET_STATE
+#define IXJCTL_PSTN_GET_STATE PHONE_PSTN_GET_STATE
+
+#define PSTN_ON_HOOK 0
+#define PSTN_RINGING 1
+#define PSTN_OFF_HOOK 2
+#define PSTN_PULSE_DIAL 3
+
+/******************************************************************************
+*
+* The DAA Analog GAIN sets 2 parameters at one time, the receive gain (AGRR),
+* and the transmit gain (AGX). OR together the components and pass them
+* as the parameter to IXJCTL_DAA_AGAIN. The default setting is both at 0dB.
+*
+******************************************************************************/
+#define IXJCTL_DAA_AGAIN _IOW ('q', 0xD2, int)
+
+#define AGRR00DB 0x00 /* Analog gain in receive direction 0dB */
+#define AGRR3_5DB 0x10 /* Analog gain in receive direction 3.5dB */
+#define AGRR06DB 0x30 /* Analog gain in receive direction 6dB */
+
+#define AGX00DB 0x00 /* Analog gain in transmit direction 0dB */
+#define AGX_6DB 0x04 /* Analog gain in transmit direction -6dB */
+#define AGX3_5DB 0x08 /* Analog gain in transmit direction 3.5dB */
+#define AGX_2_5B 0x0C /* Analog gain in transmit direction -2.5dB */
+
+#define IXJCTL_PSTN_LINETEST _IO ('q', 0xD3)
+
+#define IXJCTL_CID _IOR ('q', 0xD4, PHONE_CID *)
+#define IXJCTL_VMWI _IOR ('q', 0xD8, int)
+#define IXJCTL_CIDCW _IOW ('q', 0xD9, PHONE_CID *)
+/******************************************************************************
+*
+* The wink duration is tunable with this ioctl. The default wink duration
+* is 320ms. You do not need to use this ioctl if you do not require a
+* different wink duration.
+*
+******************************************************************************/
+#define IXJCTL_WINK_DURATION PHONE_WINK_DURATION
+
+/******************************************************************************
+*
+* This ioctl will connect the POTS port to the PSTN port on the LineJACK
+* In order for this to work properly the port selection should be set to
+* the PSTN port with IXJCTL_PORT prior to calling this ioctl. This will
+* enable conference calls between PSTN callers and network callers.
+* Passing a 1 to this ioctl enables the POTS<->PSTN connection while
+* passing a 0 turns it back off.
+*
+******************************************************************************/
+#define IXJCTL_POTS_PSTN _IOW ('q', 0xD5, int)
+
+/******************************************************************************
+*
+* IOCTLs added by request.
+*
+* IXJCTL_HZ sets the value your Linux kernel uses for HZ as defined in
+* /usr/include/asm/param.h, this determines the fundamental
+* frequency of the clock ticks on your Linux system. The kernel
+* must be rebuilt if you change this value, also all modules you
+* use (except this one) must be recompiled. The default value
+* is 100, and you only need to use this IOCTL if you use some
+* other value.
+*
+*
+* IXJCTL_RATE sets the number of times per second that the driver polls
+* the DSP. This value cannot be larger than HZ. By
+* increasing both of these values, you may be able to reduce
+* latency because the max hang time that can exist between the
+* driver and the DSP will be reduced.
+*
+******************************************************************************/
+
+#define IXJCTL_HZ _IOW ('q', 0xE0, int)
+#define IXJCTL_RATE _IOW ('q', 0xE1, int)
+#define IXJCTL_FRAMES_READ _IOR ('q', 0xE2, unsigned long)
+#define IXJCTL_FRAMES_WRITTEN _IOR ('q', 0xE3, unsigned long)
+#define IXJCTL_READ_WAIT _IOR ('q', 0xE4, unsigned long)
+#define IXJCTL_WRITE_WAIT _IOR ('q', 0xE5, unsigned long)
+#define IXJCTL_DRYBUFFER_READ _IOR ('q', 0xE6, unsigned long)
+#define IXJCTL_DRYBUFFER_CLEAR _IO ('q', 0xE7)
+#define IXJCTL_DTMF_PRESCALE _IOW ('q', 0xE8, int)
+
+/******************************************************************************
+*
+* This ioctl allows the user application to control what events the driver
+* will send signals for, and what signals it will send for which event.
+* By default, if signaling is enabled, all events will send SIGIO when
+* they occur. To disable signals for an event set the signal to 0.
+*
+******************************************************************************/
+typedef enum {
+ SIG_DTMF_READY,
+ SIG_HOOKSTATE,
+ SIG_FLASH,
+ SIG_PSTN_RING,
+ SIG_CALLER_ID,
+ SIG_PSTN_WINK,
+ SIG_F0, SIG_F1, SIG_F2, SIG_F3,
+ SIG_FC0, SIG_FC1, SIG_FC2, SIG_FC3,
+ SIG_READ_READY = 33,
+ SIG_WRITE_READY = 34
+} IXJ_SIGEVENT;
+
+typedef struct {
+ unsigned int event;
+ int signal;
+} IXJ_SIGDEF;
+
+#define IXJCTL_SIGCTL _IOW ('q', 0xE9, IXJ_SIGDEF *)
+
+/******************************************************************************
+*
+* These ioctls allow the user application to change the gain in the
+* Smart Cable of the Internet Phone Card. Sending -1 as a value will cause
+* return value to be the current setting. Valid values to set are 0x00 - 0x1F
+*
+* 11111 = +12 dB
+* 10111 = 0 dB
+* 00000 = -34.5 dB
+*
+* IXJCTL_SC_RXG sets the Receive gain
+* IXJCTL_SC_TXG sets the Transmit gain
+*
+******************************************************************************/
+#define IXJCTL_SC_RXG _IOW ('q', 0xEA, int)
+#define IXJCTL_SC_TXG _IOW ('q', 0xEB, int)
+
+/******************************************************************************
+*
+* The intercom IOCTL's short the output from one card to the input of the
+* other and vice versa (actually done in the DSP read function). It is only
+* necessary to execute the IOCTL on one card, but it is necessary to have
+* both devices open to be able to detect hook switch changes. The record
+* codec and rate of each card must match the playback codec and rate of
+* the other card for this to work properly.
+*
+******************************************************************************/
+
+#define IXJCTL_INTERCOM_START _IOW ('q', 0xFD, int)
+#define IXJCTL_INTERCOM_STOP _IOW ('q', 0xFE, int)
+
+/******************************************************************************
+ *
+ * new structure for accessing raw filter information
+ *
+ ******************************************************************************/
+
+typedef struct {
+ unsigned int filter;
+ char enable;
+ unsigned int coeff[19];
+} IXJ_FILTER_RAW;
+
+#endif