Merge tag 'mfd-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next

Pull MFD update from Samuel Ortiz:
 "For 3.10 we have a few new MFD drivers for:

   - The ChromeOS embedded controller which provides keyboard, battery
     and power management services.  This controller is accessible
     through i2c or SPI.

   - Silicon Laboratories 476x controller, providing access to their FM
     chipset and their audio codec.

   - Realtek's RTS5249, a memory stick, MMC and SD/SDIO PCI based
     reader.

   - Nokia's Tahvo power button and watchdog device.  This device is
     very similar to Retu and is thus supported by the same code base.

   - STMicroelectronics STMPE1801, a keyboard and GPIO controller
     supported by the stmpe driver.

   - ST-Ericsson AB8540 and AB8505 power management and voltage
     converter controllers through the existing ab8500 code.

  Some other drivers got cleaned up or improved.  In particular:

   - The Linaro/STE guys got the ab8500 driver in sync with their
     internal code through a series of optimizations, fixes and
     improvements.

   - The AS3711 and OMAP USB drivers now have DT support.

   - The arizona clock and interrupt handling code got improved.

   - The wm5102 register patch and boot mechanism also got improved."

* tag 'mfd-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (104 commits)
  mfd: si476x: Don't use 0bNNN
  mfd: vexpress: Handle pending config transactions
  mfd: ab8500: Export ab8500_gpadc_sw_hw_convert properly
  mfd: si476x: Fix i2c warning
  mfd: si476x: Add header files and Kbuild plumbing
  mfd: si476x: Add chip properties handling code
  mfd: si476x: Add the bulk of the core driver
  mfd: si476x: Add commands abstraction layer
  mfd: rtsx: Support RTS5249
  mfd: retu: Add Tahvo support
  mfd: ucb1400: Pass ucb1400-gpio data through ac97 bus
  mfd: wm8994: Add some OF properties
  mfd: wm8994: Add device ID data to WM8994 OF device IDs
  input: Export matrix_keypad_parse_of_params()
  mfd: tps65090: Add compatible string for charger subnode
  mfd: db8500-prcmu: Support platform dependant device selection
  mfd: syscon: Fix warnings when printing resource_size_t
  of: Add stub of_get_parent for non-OF builds
  mfd: omap-usb-tll: Convert to devm_ioremap_resource()
  mfd: omap-usb-host: Convert to devm_ioremap_resource()
  ...

1 files changed, 6 insertions, 1 deletions

diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h
index a0f940987a3..80dead1f710 100644
--- a/include/linux/mfd/arizona/pdata.h
+++ b/include/linux/mfd/arizona/pdata.h
@@ -78,6 +78,7 @@ struct arizona_micbias {
 	unsigned int ext_cap:1;    /** External capacitor fitted */
 	unsigned int discharge:1;  /** Actively discharge */
 	unsigned int fast_start:1; /** Enable aggressive startup ramp rate */
+	unsigned int bypass:1;     /** Use bypass mode */
 };
 
 struct arizona_micd_config {
@@ -104,7 +105,8 @@ struct arizona_pdata {
 	/** If a direct 32kHz clock is provided on an MCLK specify it here */
 	int clk32k_src;
 
-	bool irq_active_high; /** IRQ polarity */
+	/** Mode for primary IRQ (defaults to active low) */
+	unsigned int irq_flags;
 
 	/* Base GPIO */
 	int gpio_base;
@@ -183,6 +185,9 @@ struct arizona_pdata {
 
 	/** Haptic actuator type */
 	unsigned int hap_act;
+
+	/** GPIO for primary IRQ (used for edge triggered emulation) */
+	int irq_gpio;
 };
 
 #endif