Merge tag 'mfd-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next

Pull MFD update from Samuel Ortiz:
 "For 3.10 we have a few new MFD drivers for:

   - The ChromeOS embedded controller which provides keyboard, battery
     and power management services.  This controller is accessible
     through i2c or SPI.

   - Silicon Laboratories 476x controller, providing access to their FM
     chipset and their audio codec.

   - Realtek's RTS5249, a memory stick, MMC and SD/SDIO PCI based
     reader.

   - Nokia's Tahvo power button and watchdog device.  This device is
     very similar to Retu and is thus supported by the same code base.

   - STMicroelectronics STMPE1801, a keyboard and GPIO controller
     supported by the stmpe driver.

   - ST-Ericsson AB8540 and AB8505 power management and voltage
     converter controllers through the existing ab8500 code.

  Some other drivers got cleaned up or improved.  In particular:

   - The Linaro/STE guys got the ab8500 driver in sync with their
     internal code through a series of optimizations, fixes and
     improvements.

   - The AS3711 and OMAP USB drivers now have DT support.

   - The arizona clock and interrupt handling code got improved.

   - The wm5102 register patch and boot mechanism also got improved."

* tag 'mfd-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (104 commits)
  mfd: si476x: Don't use 0bNNN
  mfd: vexpress: Handle pending config transactions
  mfd: ab8500: Export ab8500_gpadc_sw_hw_convert properly
  mfd: si476x: Fix i2c warning
  mfd: si476x: Add header files and Kbuild plumbing
  mfd: si476x: Add chip properties handling code
  mfd: si476x: Add the bulk of the core driver
  mfd: si476x: Add commands abstraction layer
  mfd: rtsx: Support RTS5249
  mfd: retu: Add Tahvo support
  mfd: ucb1400: Pass ucb1400-gpio data through ac97 bus
  mfd: wm8994: Add some OF properties
  mfd: wm8994: Add device ID data to WM8994 OF device IDs
  input: Export matrix_keypad_parse_of_params()
  mfd: tps65090: Add compatible string for charger subnode
  mfd: db8500-prcmu: Support platform dependant device selection
  mfd: syscon: Fix warnings when printing resource_size_t
  of: Add stub of_get_parent for non-OF builds
  mfd: omap-usb-tll: Convert to devm_ioremap_resource()
  mfd: omap-usb-host: Convert to devm_ioremap_resource()
  ...

1 files changed, 36 insertions, 0 deletions

diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
index 26ea7f1b7ca..86bc635f838 100644
--- a/include/linux/mfd/rtsx_pci.h
+++ b/include/linux/mfd/rtsx_pci.h
@@ -500,6 +500,8 @@
 #define BPP_POWER_15_PERCENT_ON		0x08
 #define BPP_POWER_ON			0x00
 #define BPP_POWER_MASK			0x0F
+#define SD_VCC_PARTIAL_POWER_ON		0x02
+#define SD_VCC_POWER_ON			0x00
 
 /* PWR_GATE_CTRL */
 #define PWR_GATE_EN			0x01
@@ -689,6 +691,40 @@
 #define IMAGE_FLAG_ADDR0		0xCE80
 #define IMAGE_FLAG_ADDR1		0xCE81
 
+/* Phy register */
+#define PHY_PCR				0x00
+#define PHY_RCR0			0x01
+#define PHY_RCR1			0x02
+#define PHY_RCR2			0x03
+#define PHY_RTCR			0x04
+#define PHY_RDR				0x05
+#define PHY_TCR0			0x06
+#define PHY_TCR1			0x07
+#define PHY_TUNE			0x08
+#define PHY_IMR				0x09
+#define PHY_BPCR			0x0A
+#define PHY_BIST			0x0B
+#define PHY_RAW_L			0x0C
+#define PHY_RAW_H			0x0D
+#define PHY_RAW_DATA			0x0E
+#define PHY_HOST_CLK_CTRL		0x0F
+#define PHY_DMR				0x10
+#define PHY_BACR			0x11
+#define PHY_IER				0x12
+#define PHY_BCSR			0x13
+#define PHY_BPR				0x14
+#define PHY_BPNR2			0x15
+#define PHY_BPNR			0x16
+#define PHY_BRNR2			0x17
+#define PHY_BENR			0x18
+#define PHY_REG_REV			0x19
+#define PHY_FLD0			0x1A
+#define PHY_FLD1			0x1B
+#define PHY_FLD2			0x1C
+#define PHY_FLD3			0x1D
+#define PHY_FLD4			0x1E
+#define PHY_DUM_REG			0x1F
+
 #define rtsx_pci_init_cmd(pcr)		((pcr)->ci = 0)
 
 struct rtsx_pcr;