Merge tag 'isci-for-3.5' into misc

isci update for 3.5

1/ Rework remote-node-context (RNC) handling for proper management of
   the silicon state machine in error handling and hot-plug conditions.
   Further details below, suffice to say if the RNC is mismanaged the
   silicon state machines may lock up.

2/ Refactor the initialization code to be reused for suspend/resume support

3/ Miscellaneous bug fixes to address discovery issues and hardware
   compatibility.

RNC rework details from Jeff Skirvin:

In the controller, devices as they appear on a SAS domain (or
direct-attached SATA devices) are represented by memory structures known
as "Remote Node Contexts" (RNCs).  These structures are transferred from
main memory to the controller using a set of register commands; these
commands include setting up the context ("posting"), removing the
context ("invalidating"), and commands to control the scheduling of
commands and connections to that remote device ("suspensions" and
"resumptions").  There is a similar path to control RNC scheduling from
the protocol engine, which interprets the results of command and data
transmission and reception.

In general, the controller chooses among non-suspended RNCs to find one
that has work requiring scheduling the transmission of command and data
frames to a target.  Likewise, when a target tries to return data back
to the initiator, the state of the RNC is used by the controller to
determine how to treat the incoming request. As an example, if the RNC
is in the state "TX/RX Suspended", incoming SSP connection requests from
the target will be rejected by the controller hardware.  When an RNC is
"TX Suspended", it will not be selected by the controller hardware to
start outgoing command or data operations (with certain priority-based
exceptions).

As mentioned above, there are two sources for management of the RNC
states: commands from driver software, and the result of transmission
and reception conditions of commands and data signaled by the controller
hardware.  As an example of the latter, if an outgoing SSP command ends
with a OPEN_REJECT(BAD_DESTINATION) status, the RNC state will
transition to the "TX Suspended" state, and this is signaled by the
controller hardware in the status to the completion of the pending
command as well as signaled in a controller hardware event.  Examples of
the former are included in the patch changelogs.

Driver software is required to suspend the RNC in a "TX/RX Suspended"
condition before any outstanding commands can be terminated.  Failure to
guarantee this can lead to a complete hardware hang condition.  Earlier
versions of the driver software did not guarantee that an RNC was
correctly managed before I/O termination, and so operated in an unsafe
way.

Further, the driver performed unnecessary contortions to preserve the
remote device command state and so was more complicated than it needed
to be.  A simplifying driver assumption is that once an I/O has entered
the error handler path without having completed in the target, the
requirement on the driver is that all use of the sas_task must end.
Beyond that, recovery of operation is dependent on libsas and other
components to reset, rediscover and reconfigure the device before normal
operation can restart.  In the driver, this simplifying assumption meant
that the RNC management could be reduced to entry into the suspended
state, terminating the targeted I/O request, and resuming the RNC as
needed for device-specific management such as an SSP Abort Task or LUN
Reset Management request.

3 files changed, 103 insertions, 59 deletions

diff --git a/include/linux/mfd/db5500-prcmu.h b/include/linux/mfd/db5500-prcmu.h
index 9890687f582..5a049dfaf15 100644
--- a/include/linux/mfd/db5500-prcmu.h
+++ b/include/linux/mfd/db5500-prcmu.h
@@ -8,41 +8,14 @@
 #ifndef __MFD_DB5500_PRCMU_H
 #define __MFD_DB5500_PRCMU_H
 
-#ifdef CONFIG_MFD_DB5500_PRCMU
-
-void db5500_prcmu_early_init(void);
-int db5500_prcmu_set_epod(u16 epod_id, u8 epod_state);
-int db5500_prcmu_set_display_clocks(void);
-int db5500_prcmu_disable_dsipll(void);
-int db5500_prcmu_enable_dsipll(void);
-int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
-int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
-void db5500_prcmu_enable_wakeups(u32 wakeups);
-int db5500_prcmu_request_clock(u8 clock, bool enable);
-void db5500_prcmu_config_abb_event_readout(u32 abb_events);
-void db5500_prcmu_get_abb_event_buffer(void __iomem **buf);
-int prcmu_resetout(u8 resoutn, u8 state);
-int db5500_prcmu_set_power_state(u8 state, bool keep_ulp_clk,
-	bool keep_ap_pll);
-int db5500_prcmu_config_esram0_deep_sleep(u8 state);
-void db5500_prcmu_system_reset(u16 reset_code);
-u16 db5500_prcmu_get_reset_code(void);
-bool db5500_prcmu_is_ac_wake_requested(void);
-int db5500_prcmu_set_arm_opp(u8 opp);
-int db5500_prcmu_get_arm_opp(void);
-
-#else /* !CONFIG_UX500_SOC_DB5500 */
-
-static inline void db5500_prcmu_early_init(void) {}
-
-static inline int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
+static inline int prcmu_resetout(u8 resoutn, u8 state)
 {
-	return -ENOSYS;
+	return 0;
 }
 
-static inline int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
+static inline int db5500_prcmu_set_epod(u16 epod_id, u8 epod_state)
 {
-	return -ENOSYS;
+	return 0;
 }
 
 static inline int db5500_prcmu_request_clock(u8 clock, bool enable)
@@ -50,69 +23,82 @@ static inline int db5500_prcmu_request_clock(u8 clock, bool enable)
 	return 0;
 }
 
-static inline int db5500_prcmu_set_display_clocks(void)
+static inline int db5500_prcmu_set_power_state(u8 state, bool keep_ulp_clk,
+	bool keep_ap_pll)
 {
 	return 0;
 }
 
-static inline int db5500_prcmu_disable_dsipll(void)
+static inline int db5500_prcmu_config_esram0_deep_sleep(u8 state)
 {
 	return 0;
 }
 
-static inline int db5500_prcmu_enable_dsipll(void)
+static inline u16 db5500_prcmu_get_reset_code(void)
 {
 	return 0;
 }
 
-static inline int db5500_prcmu_config_esram0_deep_sleep(u8 state)
+static inline bool db5500_prcmu_is_ac_wake_requested(void)
 {
 	return 0;
 }
 
-static inline void db5500_prcmu_enable_wakeups(u32 wakeups) {}
-
-static inline int prcmu_resetout(u8 resoutn, u8 state)
+static inline int db5500_prcmu_set_arm_opp(u8 opp)
 {
 	return 0;
 }
 
-static inline int db5500_prcmu_set_epod(u16 epod_id, u8 epod_state)
+static inline int db5500_prcmu_get_arm_opp(void)
 {
 	return 0;
 }
 
-static inline void db5500_prcmu_get_abb_event_buffer(void __iomem **buf) {}
 static inline void db5500_prcmu_config_abb_event_readout(u32 abb_events) {}
 
-static inline int db5500_prcmu_set_power_state(u8 state, bool keep_ulp_clk,
-	bool keep_ap_pll)
-{
-	return 0;
-}
+static inline void db5500_prcmu_get_abb_event_buffer(void __iomem **buf) {}
 
 static inline void db5500_prcmu_system_reset(u16 reset_code) {}
 
-static inline u16 db5500_prcmu_get_reset_code(void)
+static inline void db5500_prcmu_enable_wakeups(u32 wakeups) {}
+
+#ifdef CONFIG_MFD_DB5500_PRCMU
+
+void db5500_prcmu_early_init(void);
+int db5500_prcmu_set_display_clocks(void);
+int db5500_prcmu_disable_dsipll(void);
+int db5500_prcmu_enable_dsipll(void);
+int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
+int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
+
+#else /* !CONFIG_UX500_SOC_DB5500 */
+
+static inline void db5500_prcmu_early_init(void) {}
+
+static inline int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
 {
-	return 0;
+	return -ENOSYS;
 }
 
-static inline bool db5500_prcmu_is_ac_wake_requested(void)
+static inline int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
 {
-	return 0;
+	return -ENOSYS;
 }
 
-static inline int db5500_prcmu_set_arm_opp(u8 opp)
+static inline int db5500_prcmu_set_display_clocks(void)
 {
 	return 0;
 }
 
-static inline int db5500_prcmu_get_arm_opp(void)
+static inline int db5500_prcmu_disable_dsipll(void)
 {
 	return 0;
 }
 
+static inline int db5500_prcmu_enable_dsipll(void)
+{
+	return 0;
+}
 
 #endif /* CONFIG_MFD_DB5500_PRCMU */
 
diff --git a/include/linux/mfd/rc5t583.h b/include/linux/mfd/rc5t583.h
index a2c61609d21..0b64b19d81a 100644
--- a/include/linux/mfd/rc5t583.h
+++ b/include/linux/mfd/rc5t583.h
@@ -26,6 +26,7 @@
 
 #include <linux/mutex.h>
 #include <linux/types.h>
+#include <linux/regmap.h>
 
 #define RC5T583_MAX_REGS		0xF8
 
@@ -279,14 +280,44 @@ struct rc5t583_platform_data {
 	bool		enable_shutdown;
 };
 
-int rc5t583_write(struct device *dev, u8 reg, uint8_t val);
-int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val);
-int rc5t583_set_bits(struct device *dev, unsigned int reg,
-		unsigned int bit_mask);
-int rc5t583_clear_bits(struct device *dev, unsigned int reg,
-		unsigned int bit_mask);
-int rc5t583_update(struct device *dev, unsigned int reg,
-		unsigned int val, unsigned int mask);
+static inline int rc5t583_write(struct device *dev, uint8_t reg, uint8_t val)
+{
+	struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
+	return regmap_write(rc5t583->regmap, reg, val);
+}
+
+static inline int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val)
+{
+	struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
+	unsigned int ival;
+	int ret;
+	ret = regmap_read(rc5t583->regmap, reg, &ival);
+	if (!ret)
+		*val = (uint8_t)ival;
+	return ret;
+}
+
+static inline int rc5t583_set_bits(struct device *dev, unsigned int reg,
+			unsigned int bit_mask)
+{
+	struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
+	return regmap_update_bits(rc5t583->regmap, reg, bit_mask, bit_mask);
+}
+
+static inline int rc5t583_clear_bits(struct device *dev, unsigned int reg,
+			unsigned int bit_mask)
+{
+	struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
+	return regmap_update_bits(rc5t583->regmap, reg, bit_mask, 0);
+}
+
+static inline int rc5t583_update(struct device *dev, unsigned int reg,
+		unsigned int val, unsigned int mask)
+{
+	struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
+	return regmap_update_bits(rc5t583->regmap, reg, mask, val);
+}
+
 int rc5t583_ext_power_req_config(struct device *dev, int deepsleep_id,
 	int ext_pwr_req, int deepsleep_slot_nr);
 int rc5t583_irq_init(struct rc5t583 *rc5t583, int irq, int irq_base);
diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h
index 9bc9ac651da..b15b5f03f5c 100644
--- a/include/linux/mfd/twl6040.h
+++ b/include/linux/mfd/twl6040.h
@@ -174,8 +174,35 @@
 #define TWL6040_SYSCLK_SEL_LPPLL	0
 #define TWL6040_SYSCLK_SEL_HPPLL	1
 
+struct twl6040_codec_data {
+	u16 hs_left_step;
+	u16 hs_right_step;
+	u16 hf_left_step;
+	u16 hf_right_step;
+};
+
+struct twl6040_vibra_data {
+	unsigned int vibldrv_res;	/* left driver resistance */
+	unsigned int vibrdrv_res;	/* right driver resistance */
+	unsigned int viblmotor_res;	/* left motor resistance */
+	unsigned int vibrmotor_res;	/* right motor resistance */
+	int vddvibl_uV;			/* VDDVIBL volt, set 0 for fixed reg */
+	int vddvibr_uV;			/* VDDVIBR volt, set 0 for fixed reg */
+};
+
+struct twl6040_platform_data {
+	int audpwron_gpio;	/* audio power-on gpio */
+	unsigned int irq_base;
+
+	struct twl6040_codec_data *codec;
+	struct twl6040_vibra_data *vibra;
+};
+
+struct regmap;
+
 struct twl6040 {
 	struct device *dev;
+	struct regmap *regmap;
 	struct mutex mutex;
 	struct mutex io_mutex;
 	struct mutex irq_mutex;