Merge branch 'master' into for-next

14 files changed, 773 insertions, 282 deletions

diff --git a/include/linux/mfd/88pm860x.h b/include/linux/mfd/88pm860x.h
index 73f92c5feea..bfd23bef736 100644
--- a/include/linux/mfd/88pm860x.h
+++ b/include/linux/mfd/88pm860x.h
@@ -132,6 +132,7 @@ enum {
 	PM8607_ID_LDO9,
 	PM8607_ID_LDO10,
 	PM8607_ID_LDO12,
+	PM8607_ID_LDO13,
 	PM8607_ID_LDO14,
 
 	PM8607_ID_RG_MAX,
@@ -309,7 +310,7 @@ struct pm860x_chip {
 
 };
 
-#define PM8607_MAX_REGULATOR	15	/* 3 Bucks, 12 LDOs */
+#define PM8607_MAX_REGULATOR	PM8607_ID_RG_MAX	/* 3 Bucks, 13 LDOs */
 
 enum {
 	GI2C_PORT = 0,
@@ -369,7 +370,7 @@ extern int pm860x_set_bits(struct i2c_client *, int, unsigned char,
 			   unsigned char);
 
 extern int pm860x_device_init(struct pm860x_chip *chip,
-			      struct pm860x_platform_data *pdata);
-extern void pm860x_device_exit(struct pm860x_chip *chip);
+			      struct pm860x_platform_data *pdata) __devinit ;
+extern void pm860x_device_exit(struct pm860x_chip *chip) __devexit ;
 
 #endif /* __LINUX_MFD_88PM860X_H */
diff --git a/include/linux/mfd/ab4500.h b/include/linux/mfd/ab4500.h
deleted file mode 100644
index a42a7033ae5..00000000000
--- a/include/linux/mfd/ab4500.h
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
- * Copyright (C) 2009 ST-Ericsson
- *
- * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- *
- * AB4500 device core funtions, for client access
- */
-#ifndef MFD_AB4500_H
-#define MFD_AB4500_H
-
-#include <linux/device.h>
-
-/*
- * AB4500 bank addresses
- */
-#define AB4500_SYS_CTRL1_BLOCK	0x1
-#define AB4500_SYS_CTRL2_BLOCK	0x2
-#define AB4500_REGU_CTRL1	0x3
-#define AB4500_REGU_CTRL2	0x4
-#define AB4500_USB		0x5
-#define AB4500_TVOUT		0x6
-#define AB4500_DBI		0x7
-#define AB4500_ECI_AV_ACC	0x8
-#define AB4500_RESERVED		0x9
-#define AB4500_GPADC		0xA
-#define AB4500_CHARGER		0xB
-#define AB4500_GAS_GAUGE	0xC
-#define AB4500_AUDIO		0xD
-#define AB4500_INTERRUPT	0xE
-#define AB4500_RTC		0xF
-#define AB4500_MISC		0x10
-#define AB4500_DEBUG		0x12
-#define AB4500_PROD_TEST	0x13
-#define AB4500_OTP_EMUL		0x15
-
-/*
- * System control 1 register offsets.
- * Bank = 0x01
- */
-#define AB4500_TURNON_STAT_REG		0x0100
-#define AB4500_RESET_STAT_REG		0x0101
-#define AB4500_PONKEY1_PRESS_STAT_REG	0x0102
-
-#define AB4500_FSM_STAT1_REG		0x0140
-#define AB4500_FSM_STAT2_REG		0x0141
-#define AB4500_SYSCLK_REQ_STAT_REG	0x0142
-#define AB4500_USB_STAT1_REG		0x0143
-#define AB4500_USB_STAT2_REG		0x0144
-#define AB4500_STATUS_SPARE1_REG	0x0145
-#define AB4500_STATUS_SPARE2_REG	0x0146
-
-#define AB4500_CTRL1_REG		0x0180
-#define AB4500_CTRL2_REG		0x0181
-
-/*
- * System control 2 register offsets.
- * bank = 0x02
- */
-#define AB4500_CTRL3_REG		0x0200
-#define AB4500_MAIN_WDOG_CTRL_REG	0x0201
-#define AB4500_MAIN_WDOG_TIMER_REG	0x0202
-#define AB4500_LOW_BAT_REG		0x0203
-#define AB4500_BATT_OK_REG		0x0204
-#define AB4500_SYSCLK_TIMER_REG		0x0205
-#define AB4500_SMPSCLK_CTRL_REG		0x0206
-#define AB4500_SMPSCLK_SEL1_REG		0x0207
-#define AB4500_SMPSCLK_SEL2_REG		0x0208
-#define AB4500_SMPSCLK_SEL3_REG		0x0209
-#define AB4500_SYSULPCLK_CONF_REG	0x020A
-#define AB4500_SYSULPCLK_CTRL1_REG	0x020B
-#define AB4500_SYSCLK_CTRL_REG		0x020C
-#define AB4500_SYSCLK_REQ1_VALID_REG	0x020D
-#define AB4500_SYSCLK_REQ_VALID_REG	0x020E
-#define AB4500_SYSCTRL_SPARE_REG	0x020F
-#define AB4500_PAD_CONF_REG		0x0210
-
-/*
- * Regu control1 register offsets
- * Bank = 0x03
- */
-#define AB4500_REGU_SERIAL_CTRL1_REG	0x0300
-#define AB4500_REGU_SERIAL_CTRL2_REG	0x0301
-#define AB4500_REGU_SERIAL_CTRL3_REG	0x0302
-#define AB4500_REGU_REQ_CTRL1_REG	0x0303
-#define AB4500_REGU_REQ_CTRL2_REG	0x0304
-#define AB4500_REGU_REQ_CTRL3_REG	0x0305
-#define AB4500_REGU_REQ_CTRL4_REG	0x0306
-#define AB4500_REGU_MISC1_REG		0x0380
-#define AB4500_REGU_OTGSUPPLY_CTRL_REG	0x0381
-#define AB4500_REGU_VUSB_CTRL_REG	0x0382
-#define AB4500_REGU_VAUDIO_SUPPLY_REG	0x0383
-#define AB4500_REGU_CTRL1_SPARE_REG	0x0384
-
-/*
- * Regu control2 Vmod register offsets
- */
-#define AB4500_REGU_VMOD_REGU_REG	0x0440
-#define AB4500_REGU_VMOD_SEL1_REG	0x0441
-#define AB4500_REGU_VMOD_SEL2_REG	0x0442
-#define AB4500_REGU_CTRL_DISCH_REG	0x0443
-#define AB4500_REGU_CTRL_DISCH2_REG	0x0444
-
-/*
- * USB/ULPI register offsets
- * Bank : 0x5
- */
-#define AB4500_USB_LINE_STAT_REG	0x0580
-#define AB4500_USB_LINE_CTRL1_REG	0x0581
-#define AB4500_USB_LINE_CTRL2_REG	0x0582
-#define AB4500_USB_LINE_CTRL3_REG	0x0583
-#define AB4500_USB_LINE_CTRL4_REG	0x0584
-#define AB4500_USB_LINE_CTRL5_REG	0x0585
-#define AB4500_USB_OTG_CTRL_REG		0x0587
-#define AB4500_USB_OTG_STAT_REG		0x0588
-#define AB4500_USB_OTG_STAT_REG		0x0588
-#define AB4500_USB_CTRL_SPARE_REG	0x0589
-#define AB4500_USB_PHY_CTRL_REG		0x058A
-
-/*
- * TVOUT / CTRL register offsets
- * Bank : 0x06
- */
-#define AB4500_TVOUT_CTRL_REG		0x0680
-
-/*
- * DBI register offsets
- * Bank : 0x07
- */
-#define AB4500_DBI_REG1_REG		0x0700
-#define AB4500_DBI_REG2_REG		0x0701
-
-/*
- * ECI regsiter offsets
- * Bank : 0x08
- */
-#define AB4500_ECI_CTRL_REG		0x0800
-#define AB4500_ECI_HOOKLEVEL_REG	0x0801
-#define AB4500_ECI_DATAOUT_REG		0x0802
-#define AB4500_ECI_DATAIN_REG		0x0803
-
-/*
- * AV Connector register offsets
- * Bank : 0x08
- */
-#define AB4500_AV_CONN_REG		0x0840
-
-/*
- * Accessory detection register offsets
- * Bank : 0x08
- */
-#define AB4500_ACC_DET_DB1_REG		0x0880
-#define AB4500_ACC_DET_DB2_REG		0x0881
-
-/*
- * GPADC register offsets
- * Bank : 0x0A
- */
-#define AB4500_GPADC_CTRL1_REG		0x0A00
-#define AB4500_GPADC_CTRL2_REG		0x0A01
-#define AB4500_GPADC_CTRL3_REG		0x0A02
-#define AB4500_GPADC_AUTO_TIMER_REG	0x0A03
-#define AB4500_GPADC_STAT_REG		0x0A04
-#define AB4500_GPADC_MANDATAL_REG	0x0A05
-#define AB4500_GPADC_MANDATAH_REG	0x0A06
-#define AB4500_GPADC_AUTODATAL_REG	0x0A07
-#define AB4500_GPADC_AUTODATAH_REG	0x0A08
-#define AB4500_GPADC_MUX_CTRL_REG	0x0A09
-
-/*
- * Charger / status register offfsets
- * Bank : 0x0B
- */
-#define AB4500_CH_STATUS1_REG		0x0B00
-#define AB4500_CH_STATUS2_REG		0x0B01
-#define AB4500_CH_USBCH_STAT1_REG	0x0B02
-#define AB4500_CH_USBCH_STAT2_REG	0x0B03
-#define AB4500_CH_FSM_STAT_REG		0x0B04
-#define AB4500_CH_STAT_REG		0x0B05
-
-/*
- * Charger / control register offfsets
- * Bank : 0x0B
- */
-#define AB4500_CH_VOLT_LVL_REG		0x0B40
-
-/*
- * Charger / main control register offfsets
- * Bank : 0x0B
- */
-#define AB4500_MCH_CTRL1		0x0B80
-#define AB4500_MCH_CTRL2		0x0B81
-#define AB4500_MCH_IPT_CURLVL_REG	0x0B82
-#define AB4500_CH_WD_REG		0x0B83
-
-/*
- * Charger / USB control register offsets
- * Bank : 0x0B
- */
-#define AB4500_USBCH_CTRL1_REG		0x0BC0
-#define AB4500_USBCH_CTRL2_REG		0x0BC1
-#define AB4500_USBCH_IPT_CRNTLVL_REG	0x0BC2
-
-/*
- * RTC bank register offsets
- * Bank : 0xF
- */
-#define AB4500_RTC_SOFF_STAT_REG	0x0F00
-#define AB4500_RTC_CC_CONF_REG		0x0F01
-#define AB4500_RTC_READ_REQ_REG		0x0F02
-#define AB4500_RTC_WATCH_TSECMID_REG	0x0F03
-#define AB4500_RTC_WATCH_TSECHI_REG	0x0F04
-#define AB4500_RTC_WATCH_TMIN_LOW_REG	0x0F05
-#define AB4500_RTC_WATCH_TMIN_MID_REG	0x0F06
-#define AB4500_RTC_WATCH_TMIN_HI_REG	0x0F07
-#define AB4500_RTC_ALRM_MIN_LOW_REG	0x0F08
-#define AB4500_RTC_ALRM_MIN_MID_REG	0x0F09
-#define AB4500_RTC_ALRM_MIN_HI_REG	0x0F0A
-#define AB4500_RTC_STAT_REG		0x0F0B
-#define AB4500_RTC_BKUP_CHG_REG		0x0F0C
-#define AB4500_RTC_FORCE_BKUP_REG	0x0F0D
-#define AB4500_RTC_CALIB_REG		0x0F0E
-#define AB4500_RTC_SWITCH_STAT_REG	0x0F0F
-
-/*
- * PWM Out generators
- * Bank: 0x10
- */
-#define AB4500_PWM_OUT_CTRL1_REG	0x1060
-#define AB4500_PWM_OUT_CTRL2_REG	0x1061
-#define AB4500_PWM_OUT_CTRL3_REG	0x1062
-#define AB4500_PWM_OUT_CTRL4_REG	0x1063
-#define AB4500_PWM_OUT_CTRL5_REG	0x1064
-#define AB4500_PWM_OUT_CTRL6_REG	0x1065
-#define AB4500_PWM_OUT_CTRL7_REG	0x1066
-
-#define AB4500_I2C_PAD_CTRL_REG		0x1067
-#define AB4500_REV_REG			0x1080
-
-/**
- * struct ab4500
- * @spi: spi device structure
- * @tx_buf: transmit buffer
- * @rx_buf: receive buffer
- * @lock: sync primitive
- */
-struct ab4500 {
-	struct spi_device	*spi;
-	unsigned long		tx_buf[4];
-	unsigned long		rx_buf[4];
-	struct mutex		lock;
-};
-
-int ab4500_write(struct ab4500 *ab4500, unsigned char block,
-		unsigned long addr, unsigned char data);
-int ab4500_read(struct ab4500 *ab4500, unsigned char block,
-		unsigned long addr);
-
-#endif /* MFD_AB4500_H */
diff --git a/include/linux/mfd/ab8500.h b/include/linux/mfd/ab8500.h
new file mode 100644
index 00000000000..b63ff3ba335
--- /dev/null
+++ b/include/linux/mfd/ab8500.h
@@ -0,0 +1,128 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+ */
+#ifndef MFD_AB8500_H
+#define MFD_AB8500_H
+
+#include <linux/device.h>
+
+/*
+ * Interrupts
+ */
+
+#define AB8500_INT_MAIN_EXT_CH_NOT_OK	0
+#define AB8500_INT_UN_PLUG_TV_DET	1
+#define AB8500_INT_PLUG_TV_DET		2
+#define AB8500_INT_TEMP_WARM		3
+#define AB8500_INT_PON_KEY2DB_F		4
+#define AB8500_INT_PON_KEY2DB_R		5
+#define AB8500_INT_PON_KEY1DB_F		6
+#define AB8500_INT_PON_KEY1DB_R		7
+#define AB8500_INT_BATT_OVV		8
+#define AB8500_INT_MAIN_CH_UNPLUG_DET	10
+#define AB8500_INT_MAIN_CH_PLUG_DET	11
+#define AB8500_INT_USB_ID_DET_F		12
+#define AB8500_INT_USB_ID_DET_R		13
+#define AB8500_INT_VBUS_DET_F		14
+#define AB8500_INT_VBUS_DET_R		15
+#define AB8500_INT_VBUS_CH_DROP_END	16
+#define AB8500_INT_RTC_60S		17
+#define AB8500_INT_RTC_ALARM		18
+#define AB8500_INT_BAT_CTRL_INDB	20
+#define AB8500_INT_CH_WD_EXP		21
+#define AB8500_INT_VBUS_OVV		22
+#define AB8500_INT_MAIN_CH_DROP_END	23
+#define AB8500_INT_CCN_CONV_ACC		24
+#define AB8500_INT_INT_AUD		25
+#define AB8500_INT_CCEOC		26
+#define AB8500_INT_CC_INT_CALIB		27
+#define AB8500_INT_LOW_BAT_F		28
+#define AB8500_INT_LOW_BAT_R		29
+#define AB8500_INT_BUP_CHG_NOT_OK	30
+#define AB8500_INT_BUP_CHG_OK		31
+#define AB8500_INT_GP_HW_ADC_CONV_END	32
+#define AB8500_INT_ACC_DETECT_1DB_F	33
+#define AB8500_INT_ACC_DETECT_1DB_R	34
+#define AB8500_INT_ACC_DETECT_22DB_F	35
+#define AB8500_INT_ACC_DETECT_22DB_R	36
+#define AB8500_INT_ACC_DETECT_21DB_F	37
+#define AB8500_INT_ACC_DETECT_21DB_R	38
+#define AB8500_INT_GP_SW_ADC_CONV_END	39
+#define AB8500_INT_BTEMP_LOW		72
+#define AB8500_INT_BTEMP_LOW_MEDIUM	73
+#define AB8500_INT_BTEMP_MEDIUM_HIGH	74
+#define AB8500_INT_BTEMP_HIGH		75
+#define AB8500_INT_USB_CHARGER_NOT_OK	81
+#define AB8500_INT_ID_WAKEUP_R		82
+#define AB8500_INT_ID_DET_R1R		84
+#define AB8500_INT_ID_DET_R2R		85
+#define AB8500_INT_ID_DET_R3R		86
+#define AB8500_INT_ID_DET_R4R		87
+#define AB8500_INT_ID_WAKEUP_F		88
+#define AB8500_INT_ID_DET_R1F		90
+#define AB8500_INT_ID_DET_R2F		91
+#define AB8500_INT_ID_DET_R3F		92
+#define AB8500_INT_ID_DET_R4F		93
+#define AB8500_INT_USB_CHG_DET_DONE	94
+#define AB8500_INT_USB_CH_TH_PROT_F	96
+#define AB8500_INT_USB_CH_TH_PROP_R	97
+#define AB8500_INT_MAIN_CH_TH_PROP_F	98
+#define AB8500_INT_MAIN_CH_TH_PROT_R	99
+#define AB8500_INT_USB_CHARGER_NOT_OKF	103
+
+#define AB8500_NR_IRQS			104
+#define AB8500_NUM_IRQ_REGS		13
+
+/**
+ * struct ab8500 - ab8500 internal structure
+ * @dev: parent device
+ * @lock: read/write operations lock
+ * @irq_lock: genirq bus lock
+ * @revision: chip revision
+ * @irq: irq line
+ * @write: register write
+ * @read: register read
+ * @rx_buf: rx buf for SPI
+ * @tx_buf: tx buf for SPI
+ * @mask: cache of IRQ regs for bus lock
+ * @oldmask: cache of previous IRQ regs for bus lock
+ */
+struct ab8500 {
+	struct device	*dev;
+	struct mutex	lock;
+	struct mutex	irq_lock;
+	int		revision;
+	int		irq_base;
+	int		irq;
+
+	int (*write) (struct ab8500 *a8500, u16 addr, u8 data);
+	int (*read) (struct ab8500 *a8500, u16 addr);
+
+	unsigned long	tx_buf[4];
+	unsigned long	rx_buf[4];
+
+	u8 mask[AB8500_NUM_IRQ_REGS];
+	u8 oldmask[AB8500_NUM_IRQ_REGS];
+};
+
+/**
+ * struct ab8500_platform_data - AB8500 platform data
+ * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used
+ * @init: board-specific initialization after detection of ab8500
+ */
+struct ab8500_platform_data {
+	int irq_base;
+	void (*init) (struct ab8500 *);
+};
+
+extern int ab8500_write(struct ab8500 *a8500, u16 addr, u8 data);
+extern int ab8500_read(struct ab8500 *a8500, u16 addr);
+extern int ab8500_set_bits(struct ab8500 *a8500, u16 addr, u8 mask, u8 data);
+
+extern int __devinit ab8500_init(struct ab8500 *ab8500);
+extern int __devexit ab8500_exit(struct ab8500 *ab8500);
+
+#endif /* MFD_AB8500_H */
diff --git a/include/linux/mfd/ab3100.h b/include/linux/mfd/abx500.h
index 9a881c305a5..390726fcbcb 100644
--- a/include/linux/mfd/ab3100.h
+++ b/include/linux/mfd/abx500.h
@@ -3,17 +3,37 @@
  * License terms: GNU General Public License (GPL) version 2
  * AB3100 core access functions
  * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ * ABX500 core access functions.
+ * The abx500 interface is used for the Analog Baseband chip
+ * ab3100, ab3550, ab5500 and possibly comming. It is not used for
+ * ab4500 and ab8500 since they are another family of chip.
+ *
+ * Author: Mattias Wallin <mattias.wallin@stericsson.com>
+ * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
+ * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com>
  */
 
 #include <linux/device.h>
 #include <linux/regulator/machine.h>
 
-#ifndef MFD_AB3100_H
-#define MFD_AB3100_H
+#ifndef MFD_ABX500_H
+#define MFD_ABX500_H
 
-#define ABUNKNOWN	0
-#define	AB3000		1
-#define	AB3100		2
+#define AB3100_P1A	0xc0
+#define AB3100_P1B	0xc1
+#define AB3100_P1C	0xc2
+#define AB3100_P1D	0xc3
+#define AB3100_P1E	0xc4
+#define AB3100_P1F	0xc5
+#define AB3100_P1G	0xc6
+#define AB3100_R2A	0xc7
+#define AB3100_R2B	0xc8
+#define AB3550_P1A	0x10
+#define AB5500_1_0	0x20
+#define AB5500_2_0	0x21
+#define AB5500_2_1	0x22
 
 /*
  * AB3100, EVENTA1, A2 and A3 event register flags
@@ -89,7 +109,7 @@ struct ab3100 {
 	char chip_name[32];
 	u8 chip_id;
 	struct blocking_notifier_head event_subscribers;
-	u32 startup_events;
+	u8 startup_events[3];
 	bool startup_events_read;
 };
 
@@ -112,18 +132,102 @@ struct ab3100_platform_data {
 	int external_voltage;
 };
 
-int ab3100_set_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 regval);
-int ab3100_get_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 *regval);
-int ab3100_get_register_page_interruptible(struct ab3100 *ab3100,
-			     u8 first_reg, u8 *regvals, u8 numregs);
-int ab3100_mask_and_set_register_interruptible(struct ab3100 *ab3100,
-				 u8 reg, u8 andmask, u8 ormask);
-u8 ab3100_get_chip_type(struct ab3100 *ab3100);
 int ab3100_event_register(struct ab3100 *ab3100,
 			  struct notifier_block *nb);
 int ab3100_event_unregister(struct ab3100 *ab3100,
 			    struct notifier_block *nb);
-int ab3100_event_registers_startup_state_get(struct ab3100 *ab3100,
-					     u32 *fatevent);
 
+/* AB3550, STR register flags */
+#define AB3550_STR_ONSWA				(0x01)
+#define AB3550_STR_ONSWB				(0x02)
+#define AB3550_STR_ONSWC				(0x04)
+#define AB3550_STR_DCIO					(0x08)
+#define AB3550_STR_BOOT_MODE				(0x10)
+#define AB3550_STR_SIM_OFF				(0x20)
+#define AB3550_STR_BATT_REMOVAL				(0x40)
+#define AB3550_STR_VBUS					(0x80)
+
+/* Interrupt mask registers */
+#define AB3550_IMR1 0x29
+#define AB3550_IMR2 0x2a
+#define AB3550_IMR3 0x2b
+#define AB3550_IMR4 0x2c
+#define AB3550_IMR5 0x2d
+
+enum ab3550_devid {
+	AB3550_DEVID_ADC,
+	AB3550_DEVID_DAC,
+	AB3550_DEVID_LEDS,
+	AB3550_DEVID_POWER,
+	AB3550_DEVID_REGULATORS,
+	AB3550_DEVID_SIM,
+	AB3550_DEVID_UART,
+	AB3550_DEVID_RTC,
+	AB3550_DEVID_CHARGER,
+	AB3550_DEVID_FUELGAUGE,
+	AB3550_DEVID_VIBRATOR,
+	AB3550_DEVID_CODEC,
+	AB3550_NUM_DEVICES,
+};
+
+/**
+ * struct abx500_init_setting
+ * Initial value of the registers for driver to use during setup.
+ */
+struct abx500_init_settings {
+	u8 bank;
+	u8 reg;
+	u8 setting;
+};
+
+/**
+ * struct ab3550_platform_data
+ * Data supplied to initialize board connections to the AB3550
+ */
+struct ab3550_platform_data {
+	struct {unsigned int base; unsigned int count; } irq;
+	void *dev_data[AB3550_NUM_DEVICES];
+	size_t dev_data_sz[AB3550_NUM_DEVICES];
+	struct abx500_init_settings *init_settings;
+	unsigned int init_settings_sz;
+};
+
+int abx500_set_register_interruptible(struct device *dev, u8 bank, u8 reg,
+	u8 value);
+int abx500_get_register_interruptible(struct device *dev, u8 bank, u8 reg,
+	u8 *value);
+int abx500_get_register_page_interruptible(struct device *dev, u8 bank,
+	u8 first_reg, u8 *regvals, u8 numregs);
+int abx500_set_register_page_interruptible(struct device *dev, u8 bank,
+	u8 first_reg, u8 *regvals, u8 numregs);
+/**
+ * abx500_mask_and_set_register_inerruptible() - Modifies selected bits of a
+ *	target register
+ *
+ * @dev: The AB sub device.
+ * @bank: The i2c bank number.
+ * @bitmask: The bit mask to use.
+ * @bitvalues: The new bit values.
+ *
+ * Updates the value of an AB register:
+ * value -> ((value & ~bitmask) | (bitvalues & bitmask))
+ */
+int abx500_mask_and_set_register_interruptible(struct device *dev, u8 bank,
+	u8 reg, u8 bitmask, u8 bitvalues);
+int abx500_get_chip_id(struct device *dev);
+int abx500_event_registers_startup_state_get(struct device *dev, u8 *event);
+int abx500_startup_irq_enabled(struct device *dev, unsigned int irq);
+
+struct abx500_ops {
+	int (*get_chip_id) (struct device *);
+	int (*get_register) (struct device *, u8, u8, u8 *);
+	int (*set_register) (struct device *, u8, u8, u8);
+	int (*get_register_page) (struct device *, u8, u8, u8 *, u8);
+	int (*set_register_page) (struct device *, u8, u8, u8 *, u8);
+	int (*mask_and_set_register) (struct device *, u8, u8, u8, u8);
+	int (*event_registers_startup_state_get) (struct device *, u8 *);
+	int (*startup_irq_enabled) (struct device *, unsigned int);
+};
+
+int abx500_register_ops(struct device *core_dev, struct abx500_ops *ops);
 #endif
diff --git a/include/linux/mfd/janz.h b/include/linux/mfd/janz.h
new file mode 100644
index 00000000000..e9994c46980
--- /dev/null
+++ b/include/linux/mfd/janz.h
@@ -0,0 +1,54 @@
+/*
+ * Common Definitions for Janz MODULbus devices
+ *
+ * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef JANZ_H
+#define JANZ_H
+
+struct janz_platform_data {
+	/* MODULbus Module Number */
+	unsigned int modno;
+};
+
+/* PLX bridge chip onboard registers */
+struct janz_cmodio_onboard_regs {
+	u8 unused1;
+
+	/*
+	 * Read access: interrupt status
+	 * Write access: interrupt disable
+	 */
+	u8 int_disable;
+	u8 unused2;
+
+	/*
+	 * Read access: MODULbus number (hex switch)
+	 * Write access: interrupt enable
+	 */
+	u8 int_enable;
+	u8 unused3;
+
+	/* write-only */
+	u8 reset_assert;
+	u8 unused4;
+
+	/* write-only */
+	u8 reset_deassert;
+	u8 unused5;
+
+	/* read-write access to serial EEPROM */
+	u8 eep;
+	u8 unused6;
+
+	/* write-only access to EEPROM chip select */
+	u8 enid;
+};
+
+#endif /* JANZ_H */
diff --git a/include/linux/mfd/mc13783.h b/include/linux/mfd/mc13783.h
index 8895d9d8879..4a894f68854 100644
--- a/include/linux/mfd/mc13783.h
+++ b/include/linux/mfd/mc13783.h
@@ -64,6 +64,70 @@ static inline int mc13783_ackirq(struct mc13783 *mc13783, int irq)
 					MC13783_ADC0_TSMOD1 | \
 					MC13783_ADC0_TSMOD2)
 
+struct mc13783_led_platform_data {
+#define MC13783_LED_MD		0
+#define MC13783_LED_AD		1
+#define MC13783_LED_KP		2
+#define MC13783_LED_R1		3
+#define MC13783_LED_G1		4
+#define MC13783_LED_B1		5
+#define MC13783_LED_R2		6
+#define MC13783_LED_G2		7
+#define MC13783_LED_B2		8
+#define MC13783_LED_R3		9
+#define MC13783_LED_G3		10
+#define MC13783_LED_B3		11
+#define MC13783_LED_MAX MC13783_LED_B3
+	int id;
+	const char *name;
+	const char *default_trigger;
+
+/* Three or two bits current selection depending on the led */
+	char max_current;
+};
+
+struct mc13783_leds_platform_data {
+	int num_leds;
+	struct mc13783_led_platform_data *led;
+
+#define MC13783_LED_TRIODE_MD	(1 << 0)
+#define MC13783_LED_TRIODE_AD	(1 << 1)
+#define MC13783_LED_TRIODE_KP	(1 << 2)
+#define MC13783_LED_BOOST_EN	(1 << 3)
+#define MC13783_LED_TC1HALF	(1 << 4)
+#define MC13783_LED_SLEWLIMTC	(1 << 5)
+#define MC13783_LED_SLEWLIMBL	(1 << 6)
+#define MC13783_LED_TRIODE_TC1	(1 << 7)
+#define MC13783_LED_TRIODE_TC2	(1 << 8)
+#define MC13783_LED_TRIODE_TC3	(1 << 9)
+	int flags;
+
+#define MC13783_LED_AB_DISABLED		0
+#define MC13783_LED_AB_MD1		1
+#define MC13783_LED_AB_MD12		2
+#define MC13783_LED_AB_MD123		3
+#define MC13783_LED_AB_MD1234		4
+#define MC13783_LED_AB_MD1234_AD1	5
+#define MC13783_LED_AB_MD1234_AD12	6
+#define MC13783_LED_AB_MD1_AD		7
+	char abmode;
+
+#define MC13783_LED_ABREF_200MV	0
+#define MC13783_LED_ABREF_400MV	1
+#define MC13783_LED_ABREF_600MV	2
+#define MC13783_LED_ABREF_800MV	3
+	char abref;
+
+#define MC13783_LED_PERIOD_10MS		0
+#define MC13783_LED_PERIOD_100MS	1
+#define MC13783_LED_PERIOD_500MS	2
+#define MC13783_LED_PERIOD_2S		3
+	char bl_period;
+	char tc1_period;
+	char tc2_period;
+	char tc3_period;
+};
+
 /* to be cleaned up */
 struct regulator_init_data;
 
@@ -80,12 +144,14 @@ struct mc13783_regulator_platform_data {
 struct mc13783_platform_data {
 	int num_regulators;
 	struct mc13783_regulator_init_data *regulators;
+	struct mc13783_leds_platform_data *leds;
 
 #define MC13783_USE_TOUCHSCREEN (1 << 0)
 #define MC13783_USE_CODEC	(1 << 1)
 #define MC13783_USE_ADC		(1 << 2)
 #define MC13783_USE_RTC		(1 << 3)
 #define MC13783_USE_REGULATOR	(1 << 4)
+#define MC13783_USE_LED		(1 << 5)
 	unsigned int flags;
 };
 
diff --git a/include/linux/mfd/pcf50633/backlight.h b/include/linux/mfd/pcf50633/backlight.h
new file mode 100644
index 00000000000..83747e217b2
--- /dev/null
+++ b/include/linux/mfd/pcf50633/backlight.h
@@ -0,0 +1,51 @@
+/*
+ *  Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ *      PCF50633 backlight device driver
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __LINUX_MFD_PCF50633_BACKLIGHT
+#define __LINUX_MFD_PCF50633_BACKLIGHT
+
+/*
+* @default_brightness: Backlight brightness is initialized to this value
+*
+* Brightness to be used after the driver has been probed.
+* Valid range 0-63.
+*
+* @default_brightness_limit: The actual brightness is limited by this value
+*
+* Brightness limit to be used after the driver has been probed. This is useful
+* when it is not known how much power is available for the backlight during
+* probe.
+* Valid range 0-63. Can be changed later with pcf50633_bl_set_brightness_limit.
+*
+* @ramp_time: Display ramp time when changing brightness
+*
+* When changing the backlights brightness the change is not instant, instead
+* it fades smooth from one state to another. This value specifies how long
+* the fade should take. The lower the value the higher the fade time.
+* Valid range 0-255
+*/
+struct pcf50633_bl_platform_data {
+	unsigned int	default_brightness;
+	unsigned int	default_brightness_limit;
+	uint8_t		ramp_time;
+};
+
+
+struct pcf50633;
+
+int pcf50633_bl_set_brightness_limit(struct pcf50633 *pcf, unsigned int limit);
+
+#endif
+
diff --git a/include/linux/mfd/pcf50633/core.h b/include/linux/mfd/pcf50633/core.h
index 3398bd9aab1..ad411a78870 100644
--- a/include/linux/mfd/pcf50633/core.h
+++ b/include/linux/mfd/pcf50633/core.h
@@ -18,6 +18,7 @@
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
 #include <linux/power_supply.h>
+#include <linux/mfd/pcf50633/backlight.h>
 
 struct pcf50633;
 
@@ -43,6 +44,8 @@ struct pcf50633_platform_data {
 	void (*force_shutdown)(struct pcf50633 *);
 
 	u8 resumers[5];
+
+	struct pcf50633_bl_platform_data *backlight_data;
 };
 
 struct pcf50633_irq {
@@ -152,6 +155,7 @@ struct pcf50633 {
 	struct platform_device *mbc_pdev;
 	struct platform_device *adc_pdev;
 	struct platform_device *input_pdev;
+	struct platform_device *bl_pdev;
 	struct platform_device *regulator_pdev[PCF50633_NUM_REGULATORS];
 };
 
diff --git a/include/linux/mfd/rdc321x.h b/include/linux/mfd/rdc321x.h
new file mode 100644
index 00000000000..4bdf19c8eed
--- /dev/null
+++ b/include/linux/mfd/rdc321x.h
@@ -0,0 +1,26 @@
+#ifndef __RDC321X_MFD_H
+#define __RDC321X_MFD_H
+
+#include <linux/types.h>
+#include <linux/pci.h>
+
+/* Offsets to be accessed in the southbridge PCI
+ * device configuration register */
+#define RDC321X_WDT_CTRL	0x44
+#define RDC321X_GPIO_CTRL_REG1	0x48
+#define RDC321X_GPIO_DATA_REG1	0x4c
+#define RDC321X_GPIO_CTRL_REG2	0x84
+#define RDC321X_GPIO_DATA_REG2	0x88
+
+#define RDC321X_MAX_GPIO	58
+
+struct rdc321x_gpio_pdata {
+	struct pci_dev *sb_pdev;
+	unsigned max_gpios;
+};
+
+struct rdc321x_wdt_pdata {
+	struct pci_dev *sb_pdev;
+};
+
+#endif /* __RDC321X_MFD_H */
diff --git a/include/linux/mfd/sh_mobile_sdhi.h b/include/linux/mfd/sh_mobile_sdhi.h
index 3bcd7163485..49067802a6d 100644
--- a/include/linux/mfd/sh_mobile_sdhi.h
+++ b/include/linux/mfd/sh_mobile_sdhi.h
@@ -1,7 +1,13 @@
 #ifndef __SH_MOBILE_SDHI_H__
 #define __SH_MOBILE_SDHI_H__
 
+#include <linux/types.h>
+
 struct sh_mobile_sdhi_info {
+	int dma_slave_tx;
+	int dma_slave_rx;
+	unsigned long tmio_flags;
+	u32 tmio_ocr_mask;	/* available MMC voltages */
 	void (*set_pwr)(struct platform_device *pdev, int state);
 };
 
diff --git a/include/linux/mfd/tc35892.h b/include/linux/mfd/tc35892.h
new file mode 100644
index 00000000000..e47f770d306
--- /dev/null
+++ b/include/linux/mfd/tc35892.h
@@ -0,0 +1,132 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License, version 2
+ */
+
+#ifndef __LINUX_MFD_TC35892_H
+#define __LINUX_MFD_TC35892_H
+
+#include <linux/device.h>
+
+#define TC35892_RSTCTRL_IRQRST	(1 << 4)
+#define TC35892_RSTCTRL_TIMRST	(1 << 3)
+#define TC35892_RSTCTRL_ROTRST	(1 << 2)
+#define TC35892_RSTCTRL_KBDRST	(1 << 1)
+#define TC35892_RSTCTRL_GPIRST	(1 << 0)
+
+#define TC35892_IRQST		0x91
+
+#define TC35892_MANFCODE_MAGIC	0x03
+#define TC35892_MANFCODE	0x80
+#define TC35892_VERSION		0x81
+#define TC35892_IOCFG		0xA7
+
+#define TC35892_CLKMODE		0x88
+#define TC35892_CLKCFG		0x89
+#define TC35892_CLKEN		0x8A
+
+#define TC35892_RSTCTRL		0x82
+#define TC35892_EXTRSTN		0x83
+#define TC35892_RSTINTCLR	0x84
+
+#define TC35892_GPIOIS0		0xC9
+#define TC35892_GPIOIS1		0xCA
+#define TC35892_GPIOIS2		0xCB
+#define TC35892_GPIOIBE0	0xCC
+#define TC35892_GPIOIBE1	0xCD
+#define TC35892_GPIOIBE2	0xCE
+#define TC35892_GPIOIEV0	0xCF
+#define TC35892_GPIOIEV1	0xD0
+#define TC35892_GPIOIEV2	0xD1
+#define TC35892_GPIOIE0		0xD2
+#define TC35892_GPIOIE1		0xD3
+#define TC35892_GPIOIE2		0xD4
+#define TC35892_GPIORIS0	0xD6
+#define TC35892_GPIORIS1	0xD7
+#define TC35892_GPIORIS2	0xD8
+#define TC35892_GPIOMIS0	0xD9
+#define TC35892_GPIOMIS1	0xDA
+#define TC35892_GPIOMIS2	0xDB
+#define TC35892_GPIOIC0		0xDC
+#define TC35892_GPIOIC1		0xDD
+#define TC35892_GPIOIC2		0xDE
+
+#define TC35892_GPIODATA0	0xC0
+#define TC35892_GPIOMASK0	0xc1
+#define TC35892_GPIODATA1	0xC2
+#define TC35892_GPIOMASK1	0xc3
+#define TC35892_GPIODATA2	0xC4
+#define TC35892_GPIOMASK2	0xC5
+
+#define TC35892_GPIODIR0	0xC6
+#define TC35892_GPIODIR1	0xC7
+#define TC35892_GPIODIR2	0xC8
+
+#define TC35892_GPIOSYNC0	0xE6
+#define TC35892_GPIOSYNC1	0xE7
+#define TC35892_GPIOSYNC2	0xE8
+
+#define TC35892_GPIOWAKE0	0xE9
+#define TC35892_GPIOWAKE1	0xEA
+#define TC35892_GPIOWAKE2	0xEB
+
+#define TC35892_GPIOODM0	0xE0
+#define TC35892_GPIOODE0	0xE1
+#define TC35892_GPIOODM1	0xE2
+#define TC35892_GPIOODE1	0xE3
+#define TC35892_GPIOODM2	0xE4
+#define TC35892_GPIOODE2	0xE5
+
+#define TC35892_INT_GPIIRQ	0
+#define TC35892_INT_TI0IRQ	1
+#define TC35892_INT_TI1IRQ	2
+#define TC35892_INT_TI2IRQ	3
+#define TC35892_INT_ROTIRQ	5
+#define TC35892_INT_KBDIRQ	6
+#define TC35892_INT_PORIRQ	7
+
+#define TC35892_NR_INTERNAL_IRQS	8
+#define TC35892_INT_GPIO(x)	(TC35892_NR_INTERNAL_IRQS + (x))
+
+struct tc35892 {
+	struct mutex lock;
+	struct device *dev;
+	struct i2c_client *i2c;
+
+	int irq_base;
+	int num_gpio;
+	struct tc35892_platform_data *pdata;
+};
+
+extern int tc35892_reg_write(struct tc35892 *tc35892, u8 reg, u8 data);
+extern int tc35892_reg_read(struct tc35892 *tc35892, u8 reg);
+extern int tc35892_block_read(struct tc35892 *tc35892, u8 reg, u8 length,
+			      u8 *values);
+extern int tc35892_block_write(struct tc35892 *tc35892, u8 reg, u8 length,
+			       const u8 *values);
+extern int tc35892_set_bits(struct tc35892 *tc35892, u8 reg, u8 mask, u8 val);
+
+/**
+ * struct tc35892_gpio_platform_data - TC35892 GPIO platform data
+ * @gpio_base: first gpio number assigned to TC35892.  A maximum of
+ *	       %TC35892_NR_GPIOS GPIOs will be allocated.
+ */
+struct tc35892_gpio_platform_data {
+	int gpio_base;
+};
+
+/**
+ * struct tc35892_platform_data - TC35892 platform data
+ * @irq_base: base IRQ number.  %TC35892_NR_IRQS irqs will be used.
+ * @gpio: GPIO-specific platform data
+ */
+struct tc35892_platform_data {
+	int irq_base;
+	struct tc35892_gpio_platform_data *gpio;
+};
+
+#define TC35892_NR_GPIOS	24
+#define TC35892_NR_IRQS		TC35892_INT_GPIO(TC35892_NR_GPIOS)
+
+#endif
diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
index c3f7dff8eff..f07425bc3dc 100644
--- a/include/linux/mfd/tmio.h
+++ b/include/linux/mfd/tmio.h
@@ -50,17 +50,28 @@
 		tmio_iowrite16((val) >> 16, (base) + ((reg + 2) << (shift))); \
 	} while (0)
 
+/* tmio MMC platform flags */
+#define TMIO_MMC_WRPROTECT_DISABLE	(1 << 0)
+
 int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base);
 int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base);
 void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state);
 void tmio_core_mmc_clk_div(void __iomem *cnf, int shift, int state);
 
+struct tmio_mmc_dma {
+	void *chan_priv_tx;
+	void *chan_priv_rx;
+};
+
 /*
  * data for the MMC controller
  */
 struct tmio_mmc_data {
 	unsigned int			hclk;
 	unsigned long			capabilities;
+	unsigned long			flags;
+	u32				ocr_mask;	/* available voltages */
+	struct tmio_mmc_dma		*dma;
 	void (*set_pwr)(struct platform_device *host, int state);
 	void (*set_clk_div)(struct platform_device *host, int state);
 };
diff --git a/include/linux/mfd/tps6507x.h b/include/linux/mfd/tps6507x.h
new file mode 100644
index 00000000000..c923e4864f5
--- /dev/null
+++ b/include/linux/mfd/tps6507x.h
@@ -0,0 +1,169 @@
+/* linux/mfd/tps6507x.h
+ *
+ * Functions to access TPS65070 power management chip.
+ *
+ * Copyright (c) 2009 RidgeRun (todd.fischer@ridgerun.com)
+ *
+ *
+ *  For licencing details see kernel-base/COPYING
+ */
+
+#ifndef __LINUX_MFD_TPS6507X_H
+#define __LINUX_MFD_TPS6507X_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Registers, all 8 bits
+ * ----------------------------------------------------------------------------
+ */
+
+
+/* Register definitions */
+#define	TPS6507X_REG_PPATH1			0X01
+#define	TPS6507X_CHG_USB			BIT(7)
+#define	TPS6507X_CHG_AC				BIT(6)
+#define	TPS6507X_CHG_USB_PW_ENABLE		BIT(5)
+#define	TPS6507X_CHG_AC_PW_ENABLE		BIT(4)
+#define	TPS6507X_CHG_AC_CURRENT			BIT(2)
+#define	TPS6507X_CHG_USB_CURRENT		BIT(0)
+
+#define	TPS6507X_REG_INT			0X02
+#define	TPS6507X_REG_MASK_AC_USB		BIT(7)
+#define	TPS6507X_REG_MASK_TSC			BIT(6)
+#define	TPS6507X_REG_MASK_PB_IN			BIT(5)
+#define	TPS6507X_REG_TSC_INT			BIT(3)
+#define	TPS6507X_REG_PB_IN_INT			BIT(2)
+#define	TPS6507X_REG_AC_USB_APPLIED		BIT(1)
+#define	TPS6507X_REG_AC_USB_REMOVED		BIT(0)
+
+#define	TPS6507X_REG_CHGCONFIG0			0X03
+
+#define	TPS6507X_REG_CHGCONFIG1			0X04
+#define	TPS6507X_CON_CTRL1_DCDC1_ENABLE		BIT(4)
+#define	TPS6507X_CON_CTRL1_DCDC2_ENABLE		BIT(3)
+#define	TPS6507X_CON_CTRL1_DCDC3_ENABLE		BIT(2)
+#define	TPS6507X_CON_CTRL1_LDO1_ENABLE		BIT(1)
+#define	TPS6507X_CON_CTRL1_LDO2_ENABLE		BIT(0)
+
+#define	TPS6507X_REG_CHGCONFIG2			0X05
+
+#define	TPS6507X_REG_CHGCONFIG3			0X06
+
+#define	TPS6507X_REG_ADCONFIG			0X07
+#define	TPS6507X_ADCONFIG_AD_ENABLE		BIT(7)
+#define	TPS6507X_ADCONFIG_START_CONVERSION	BIT(6)
+#define	TPS6507X_ADCONFIG_CONVERSION_DONE	BIT(5)
+#define	TPS6507X_ADCONFIG_VREF_ENABLE		BIT(4)
+#define	TPS6507X_ADCONFIG_INPUT_AD_IN1		0
+#define	TPS6507X_ADCONFIG_INPUT_AD_IN2		1
+#define	TPS6507X_ADCONFIG_INPUT_AD_IN3		2
+#define	TPS6507X_ADCONFIG_INPUT_AD_IN4		3
+#define	TPS6507X_ADCONFIG_INPUT_TS_PIN		4
+#define	TPS6507X_ADCONFIG_INPUT_BAT_CURRENT	5
+#define	TPS6507X_ADCONFIG_INPUT_AC_VOLTAGE	6
+#define	TPS6507X_ADCONFIG_INPUT_SYS_VOLTAGE	7
+#define	TPS6507X_ADCONFIG_INPUT_CHARGER_VOLTAGE 8
+#define	TPS6507X_ADCONFIG_INPUT_BAT_VOLTAGE	9
+#define	TPS6507X_ADCONFIG_INPUT_THRESHOLD_VOLTAGE 10
+#define	TPS6507X_ADCONFIG_INPUT_ISET1_VOLTAGE	11
+#define	TPS6507X_ADCONFIG_INPUT_ISET2_VOLTAGE	12
+#define	TPS6507X_ADCONFIG_INPUT_REAL_TSC	14
+#define	TPS6507X_ADCONFIG_INPUT_TSC		15
+
+#define	TPS6507X_REG_TSCMODE			0X08
+#define	TPS6507X_TSCMODE_X_POSITION		0
+#define	TPS6507X_TSCMODE_Y_POSITION		1
+#define	TPS6507X_TSCMODE_PRESSURE		2
+#define	TPS6507X_TSCMODE_X_PLATE		3
+#define	TPS6507X_TSCMODE_Y_PLATE		4
+#define	TPS6507X_TSCMODE_STANDBY		5
+#define	TPS6507X_TSCMODE_ADC_INPUT		6
+#define	TPS6507X_TSCMODE_DISABLE		7
+
+#define	TPS6507X_REG_ADRESULT_1			0X09
+
+#define	TPS6507X_REG_ADRESULT_2			0X0A
+#define	TPS6507X_REG_ADRESULT_2_MASK		(BIT(1) | BIT(0))
+
+#define	TPS6507X_REG_PGOOD			0X0B
+
+#define	TPS6507X_REG_PGOODMASK			0X0C
+
+#define	TPS6507X_REG_CON_CTRL1			0X0D
+#define	TPS6507X_CON_CTRL1_DCDC1_ENABLE		BIT(4)
+#define	TPS6507X_CON_CTRL1_DCDC2_ENABLE		BIT(3)
+#define	TPS6507X_CON_CTRL1_DCDC3_ENABLE		BIT(2)
+#define	TPS6507X_CON_CTRL1_LDO1_ENABLE		BIT(1)
+#define	TPS6507X_CON_CTRL1_LDO2_ENABLE		BIT(0)
+
+#define	TPS6507X_REG_CON_CTRL2			0X0E
+
+#define	TPS6507X_REG_CON_CTRL3			0X0F
+
+#define	TPS6507X_REG_DEFDCDC1			0X10
+#define TPS6507X_DEFDCDC1_DCDC1_EXT_ADJ_EN	BIT(7)
+#define TPS6507X_DEFDCDC1_DCDC1_MASK		0X3F
+
+#define	TPS6507X_REG_DEFDCDC2_LOW		0X11
+#define TPS6507X_DEFDCDC2_LOW_DCDC2_MASK	0X3F
+
+#define	TPS6507X_REG_DEFDCDC2_HIGH		0X12
+#define TPS6507X_DEFDCDC2_HIGH_DCDC2_MASK	0X3F
+
+#define	TPS6507X_REG_DEFDCDC3_LOW		0X13
+#define TPS6507X_DEFDCDC3_LOW_DCDC3_MASK	0X3F
+
+#define	TPS6507X_REG_DEFDCDC3_HIGH		0X14
+#define TPS6507X_DEFDCDC3_HIGH_DCDC3_MASK	0X3F
+
+#define	TPS6507X_REG_DEFSLEW			0X15
+
+#define	TPS6507X_REG_LDO_CTRL1			0X16
+#define TPS6507X_REG_LDO_CTRL1_LDO1_MASK	0X0F
+
+#define	TPS6507X_REG_DEFLDO2			0X17
+#define TPS6507X_REG_DEFLDO2_LDO2_MASK		0X3F
+
+#define	TPS6507X_REG_WLED_CTRL1			0X18
+
+#define	TPS6507X_REG_WLED_CTRL2			0X19
+
+/* VDCDC MASK */
+#define TPS6507X_DEFDCDCX_DCDC_MASK		0X3F
+
+#define TPS6507X_MAX_REGISTER			0X19
+
+/**
+ * struct tps6507x_board - packages regulator and touchscreen init data
+ * @tps6507x_regulator_data: regulator initialization values
+ *
+ * Board data may be used to initialize regulator and touchscreen.
+ */
+
+struct tps6507x_board {
+	struct regulator_init_data *tps6507x_pmic_init_data;
+	struct touchscreen_init_data *tps6507x_ts_init_data;
+};
+
+/**
+ * struct tps6507x_dev - tps6507x sub-driver chip access routines
+ * @read_dev() - I2C register read function
+ * @write_dev() - I2C register write function
+ *
+ * Device data may be used to access the TPS6507x chip
+ */
+
+struct tps6507x_dev {
+	struct device *dev;
+	struct i2c_client *i2c_client;
+	int (*read_dev)(struct tps6507x_dev *tps6507x, char reg, int size,
+			void *dest);
+	int (*write_dev)(struct tps6507x_dev *tps6507x, char reg, int size,
+			 void *src);
+
+	/* Client devices */
+	struct tps6507x_pmic *pmic;
+	struct tps6507x_ts *ts;
+};
+
+#endif /*  __LINUX_MFD_TPS6507X_H */
diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h
index 5915f6e3d9a..eb5bd4e0e03 100644
--- a/include/linux/mfd/wm831x/core.h
+++ b/include/linux/mfd/wm831x/core.h
@@ -256,8 +256,9 @@ struct wm831x {
 	int irq_masks_cache[WM831X_NUM_IRQ_REGS]; /* Cached hardware value */
 
 	/* Chip revision based flags */
-	unsigned has_gpio_ena:1;  /* Has GPIO enable bit */
-	unsigned has_cs_sts:1;    /* Has current sink status bit */
+	unsigned has_gpio_ena:1;         /* Has GPIO enable bit */
+	unsigned has_cs_sts:1;           /* Has current sink status bit */
+	unsigned charger_irq_wake:1;     /* Are charger IRQs a wake source? */
 
 	int num_gpio;