diff options
| author | Krzysztof Kozlowski <k.kozlowski@samsung.com> | 2014-12-29 10:09:16 +0100 |
|---|---|---|
| committer | Lee Jones <lee.jones@linaro.org> | 2015-01-22 16:03:55 +0000 |
| commit | 2b50635ea376c89082ef1f3204bcd7791a6e37d7 (patch) | |
| tree | 9a5bf24867917ff0f15dba1cbdd62d15ffe4ed6d /include/linux/mfd | |
| parent | 5dd6eeb2c0c3f5e1364b51a11a7e47629655b6ff (diff) | |
mfd: max77686/802: Remove support for board files
The driver is used only on Exynos based boards with DTS support.
After removal of board file support from max77686 and max77802 regulator
drivers, the MFD driver can be converted to DTS-only version. This
simplifies a little the code:
1. No dead (unused) entries in platform_data structure.
2. More code removed.
3. Regulator driver does not depend on allocated memory
from MFD driver.
4. It makes also easier extending the regulator driver.
Add to the max77686 MFD driver dependency on CONFIG_OF because without
DTS the regulator drivers (max77686 and max77802) won't bind.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Diffstat (limited to 'include/linux/mfd')
| -rw-r--r-- | include/linux/mfd/max77686-private.h | 1 | ||||
| -rw-r--r-- | include/linux/mfd/max77686.h | 28 |
2 files changed, 0 insertions, 29 deletions
diff --git a/include/linux/mfd/max77686-private.h b/include/linux/mfd/max77686-private.h index 960b92ad450..f5043490d67 100644 --- a/include/linux/mfd/max77686-private.h +++ b/include/linux/mfd/max77686-private.h @@ -447,7 +447,6 @@ struct max77686_dev { struct regmap_irq_chip_data *rtc_irq_data; int irq; - bool wakeup; struct mutex irqlock; int irq_masks_cur[MAX77686_IRQ_GROUP_NR]; int irq_masks_cache[MAX77686_IRQ_GROUP_NR]; diff --git a/include/linux/mfd/max77686.h b/include/linux/mfd/max77686.h index 553f7d09258..bb995ab9a57 100644 --- a/include/linux/mfd/max77686.h +++ b/include/linux/mfd/max77686.h @@ -119,12 +119,6 @@ enum max77802_regulators { MAX77802_REG_MAX, }; -struct max77686_regulator_data { - int id; - struct regulator_init_data *initdata; - struct device_node *of_node; -}; - enum max77686_opmode { MAX77686_OPMODE_NORMAL, MAX77686_OPMODE_LP, @@ -136,26 +130,4 @@ struct max77686_opmode_data { int mode; }; -struct max77686_platform_data { - int ono; - int wakeup; - - /* ---- PMIC ---- */ - struct max77686_regulator_data *regulators; - int num_regulators; - - struct max77686_opmode_data *opmode_data; - - /* - * GPIO-DVS feature is not enabled with the current version of - * MAX77686 driver. Buck2/3/4_voltages[0] is used as the default - * voltage at probe. DVS/SELB gpios are set as OUTPUT-LOW. - */ - int buck234_gpio_dvs[3]; /* GPIO of [0]DVS1, [1]DVS2, [2]DVS3 */ - int buck234_gpio_selb[3]; /* [0]SELB2, [1]SELB3, [2]SELB4 */ - unsigned int buck2_voltage[8]; /* buckx_voltage in uV */ - unsigned int buck3_voltage[8]; - unsigned int buck4_voltage[8]; -}; - #endif /* __LINUX_MFD_MAX77686_H */ |