mlx4_core: Implement mechanism for reserved Q_Keys

The SR-IOV special QP tunneling mechanism uses proxy special QPs
(instead of the real special QPs) for MADs on guests.  These proxy QPs
send their packets to a "tunnel" QP owned by the master.  The master
then forwards the MAD (after any required paravirtualization) to the
real special QP, which sends out the MAD.

For security reasons (i.e., to prevent guests from sending MADs to
tunnel QPs belonging to other guests), each proxy-tunnel QP pair is
assigned a unique, reserved, Q_Key.  These Q_Keys are available only
for proxy and tunnel QPs -- if the guest tries to use these Q_Keys
with other QPs, it will fail.

This patch introduces a mechanism for reserving a block of 64K Q_Keys
for proxy/tunneling use.

The patch introduces also two new fields into mlx4_dev: base_sqpn and
base_tunnel_sqpn.

In SR-IOV mode, the QP numbers for the "real," proxy, and tunnel sqps
are added to the reserved QPN area (so that they will not change).
There are 8 special QPs per port in the HCA, and each of them is
assigned both a proxy and a tunnel QP, for each VF and for the PF as
well in SR-IOV mode.

The QPNs for these QPs are arranged as follows:
 1. The real SQP numbers (8)
 2. The proxy SQPs (8 * (max number of VFs + max number of PFs)
 3. The tunnel SQPs (8 * (max number of VFs + max number of PFs)

To support these QPs, two new fields are added to struct mlx4_dev:

  base_sqp:  this is the QP number of the first of the real SQPs
  base_tunnel_sqp: this is the qp number of the first qp in the tunnel
                   sqp region. (On guests, this is the first tunnel
                   sqp of the 8 which are assigned to that guest).

In addition, in SR-IOV mode, sqp_start is the number of the first
proxy SQP in the proxy SQP region.  (In guests, this is the first
proxy SQP of the 8 which are assigned to that guest)

Note that in non-SR-IOV mode, there are no proxies and no tunnels.
In this case, sqp_start is set to sqp_base -- which minimizes code
changes.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

1 files changed, 11 insertions, 0 deletions

diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index 7fbdc89de49..c30a314e095 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -56,6 +56,13 @@ enum {
 	MLX4_MAX_PORTS		= 2
 };
 
+/* base qkey for use in sriov tunnel-qp/proxy-qp communication.
+ * These qkeys must not be allowed for general use. This is a 64k range,
+ * and to test for violation, we use the mask (protect against future chg).
+ */
+#define MLX4_RESERVED_QKEY_BASE  (0xFFFF0000)
+#define MLX4_RESERVED_QKEY_MASK  (0xFFFF0000)
+
 enum {
 	MLX4_BOARD_ID_LEN = 64
 };
@@ -293,6 +300,8 @@ struct mlx4_caps {
 	int			max_qp_init_rdma;
 	int			max_qp_dest_rdma;
 	int			sqp_start;
+	u32			base_sqpn;
+	u32			base_tunnel_sqpn;
 	int			num_srqs;
 	int			max_srq_wqes;
 	int			max_srq_sge;
@@ -772,4 +781,6 @@ int mlx4_wol_write(struct mlx4_dev *dev, u64 config, int port);
 int mlx4_counter_alloc(struct mlx4_dev *dev, u32 *idx);
 void mlx4_counter_free(struct mlx4_dev *dev, u32 idx);
 
+int mlx4_get_parav_qkey(struct mlx4_dev *dev, u32 qpn, u32 *qkey);
+
 #endif /* MLX4_DEVICE_H */