diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2013-07-10 11:16:00 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2013-07-10 11:16:00 -0700 |
commit | bfffbea1aaeeb1eb6500c83ff9653416daa5b490 (patch) | |
tree | 1325ecb176b7a3d04924d6a1563b15ad6085d36a /include/linux/mmc/host.h | |
parent | 34ae0a6f05aee9f51fca17001b4a90703d434ae1 (diff) | |
parent | 01ebea1b411aafc8eab440bf1d2037f01bbed99b (diff) |
Merge tag 'mmc-updates-for-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
Pull MMC updates from Chris Ball:
"MMC highlights for 3.11:
Core:
- Add support for eMMC 5.1 devices
- Add MMC_CAP_AGGRESSIVE_PM capability for aggressive power
management of eMMC/SD between requests, using runtime PM
- Add an ioctl to perform the eMMC 4.5 Sanitize command. Sample code
at:
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc-utils.git
Drivers:
- dw_mmc: Add support for Rockchip's Cortex-A9 SoCs
- dw_mmc: Add support for Altera SoCFPGAs
- sdhci-esdhc-imx: Add support for 8-bit bus width, non-removable
cards
- sdhci-bcm-kona: New driver for Broadcom Kona (281xx) SoCs
- sdhi/tmio: Add DT DMA support"
* tag 'mmc-updates-for-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (87 commits)
mmc: bcm281xx SDHCI driver
mmc: sdhci: add card_event callback to sdhci
mmc: core: Fixup Oops for SDIO shutdown
mmc: sdhci-pci: add another device id
mmc: esdhc: Fix bug when writing to SDHCI_HOST_CONTROL register
mmc: esdhc: Add support for 8-bit bus width and non-removable card
mmc: core: production year for eMMC 4.41 and later
mmc: omap: remove unnecessary #if 0's
mmc: sdhci: fix ctrl_2 on super-speed selection
mmc: dw_mmc-pltfm: add Rockchip variant
mmc: dw_mmc-pltfm: move probe and remove below dt match table
mmc: dw_mmc-pltfm: remove static from dw_mci_pltfm_remove
mmc: sdhci-acpi: add support for eMMC hardware reset for HID 80860F14
mmc: sdhci-pci: add support for eMMC hardware reset for BYT eMMC.
mmc: dw_mmc: Add support DW SD/MMC driver on SOCFPGA
mmc: sdhci: fix caps2 for HS200
sdhci-pxav3: Fix runtime PM initialization
mmc: core: Add DT-bindings for MMC_CAP2_FULL_PWR_CYCLE
mmc: core: Invent MMC_CAP2_FULL_PWR_CYCLE
mmc: core: Enable power_off_notify for eMMC shutdown sequence
...
Diffstat (limited to 'include/linux/mmc/host.h')
-rw-r--r-- | include/linux/mmc/host.h | 12 |
1 files changed, 4 insertions, 8 deletions
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index e326ae2882a..3b0c33ae13e 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -239,7 +239,7 @@ struct mmc_host { #define MMC_CAP_SPI (1 << 4) /* Talks only SPI protocols */ #define MMC_CAP_NEEDS_POLL (1 << 5) /* Needs polling for card-detection */ #define MMC_CAP_8_BIT_DATA (1 << 6) /* Can the host do 8 bit transfers */ - +#define MMC_CAP_AGGRESSIVE_PM (1 << 7) /* Suspend (e)MMC/SD at idle */ #define MMC_CAP_NONREMOVABLE (1 << 8) /* Nonremovable e.g. eMMC */ #define MMC_CAP_WAIT_WHILE_BUSY (1 << 9) /* Waits while card is busy */ #define MMC_CAP_ERASE (1 << 10) /* Allow erase/trim commands */ @@ -264,7 +264,7 @@ struct mmc_host { #define MMC_CAP2_BOOTPART_NOACC (1 << 0) /* Boot partition no access */ #define MMC_CAP2_CACHE_CTRL (1 << 1) /* Allow cache control */ -#define MMC_CAP2_POWEROFF_NOTIFY (1 << 2) /* Notify poweroff supported */ +#define MMC_CAP2_FULL_PWR_CYCLE (1 << 2) /* Can do full power cycle */ #define MMC_CAP2_NO_MULTI_READ (1 << 3) /* Multiblock reads don't work */ #define MMC_CAP2_NO_SLEEP_CMD (1 << 4) /* Don't allow sleep command */ #define MMC_CAP2_HS200_1_8V_SDR (1 << 5) /* can support */ @@ -272,7 +272,6 @@ struct mmc_host { #define MMC_CAP2_HS200 (MMC_CAP2_HS200_1_8V_SDR | \ MMC_CAP2_HS200_1_2V_SDR) #define MMC_CAP2_BROKEN_VOLTAGE (1 << 7) /* Use the broken voltage */ -#define MMC_CAP2_DETECT_ON_ERR (1 << 8) /* On I/O err check card removal */ #define MMC_CAP2_HC_ERASE_SZ (1 << 9) /* High-capacity erase size */ #define MMC_CAP2_CD_ACTIVE_HIGH (1 << 10) /* Card-detect signal active high */ #define MMC_CAP2_RO_ACTIVE_HIGH (1 << 11) /* Write-protect signal active high */ @@ -281,6 +280,7 @@ struct mmc_host { #define MMC_CAP2_PACKED_CMD (MMC_CAP2_PACKED_RD | \ MMC_CAP2_PACKED_WR) #define MMC_CAP2_NO_PRESCAN_POWERUP (1 << 14) /* Don't power up before scan */ +#define MMC_CAP2_SANITIZE (1 << 15) /* Support Sanitize */ mmc_pm_flag_t pm_caps; /* supported pm features */ @@ -369,7 +369,7 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *); int mmc_add_host(struct mmc_host *); void mmc_remove_host(struct mmc_host *); void mmc_free_host(struct mmc_host *); -void mmc_of_parse(struct mmc_host *host); +int mmc_of_parse(struct mmc_host *host); static inline void *mmc_priv(struct mmc_host *host) { @@ -425,10 +425,6 @@ static inline int mmc_regulator_get_supply(struct mmc_host *mmc) } #endif -int mmc_card_awake(struct mmc_host *host); -int mmc_card_sleep(struct mmc_host *host); -int mmc_card_can_sleep(struct mmc_host *host); - int mmc_pm_notify(struct notifier_block *notify_block, unsigned long, void *); /* Module parameter */ |