mmc: sdhci: split up sdhci.h for sdhci-pltfm users

Some platforms based on sdhci-pltfm need to set their own quirks.
Previously to this patch, the quirks were in drivers/mmc/host/sdhci.h.

This patch splits drivers/mmc/host/sdhci.h into two parts:

* drivers/mmc/host/sdhci.h  includes the HC registers and I/O accessors.
* include/linux/mmc/sdhci.h includes the sdhci structure and quirks.

Instead of including drivers/mmc/host/sdhci.h, -pltfm drivers should
now include include/linux/mmc/sdhci.h and include/linux/sdhci-pltfm.h.

This patch avoids adding/changing the calls/flags in the
sdhci_pltfm_data structure.  It has been tested on STM platforms
(e.g. STx7106, STx7108, STx5206) where the driver is configured
and used as shown in the example below:

[snip]
static int mmc_pad_resources(struct sdhci_host *sdhci)
{
	if (!devm_stm_pad_claim(sdhci->mmc->parent,
				&stx7108_mmc_pad_config,
				dev_name(sdhci->mmc->parent)))
		return -ENODEV;

	return 0;
}

static struct sdhci_pltfm_data stx7108_mmc_platform_data = {
	.init = mmc_pad_resources,
	.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
};

static struct platform_device stx7108_mmc_device = {
	.name = "sdhci",
[snip]

Note: drivers/mmc/host/sdhci.h now also includes linux/mmc/sdhci.h,
and no modifications should be needed on other sdhci-<XXX> drivers.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>

1 files changed, 144 insertions, 0 deletions

diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
new file mode 100644
index 00000000000..1fdc673f239
--- /dev/null
+++ b/include/linux/mmc/sdhci.h
@@ -0,0 +1,144 @@
+/*
+ *  linux/include/linux/mmc/sdhci.h - Secure Digital Host Controller Interface
+ *
+ *  Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#ifndef __SDHCI_H
+#define __SDHCI_H
+
+#include <linux/scatterlist.h>
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/io.h>
+#include <linux/mmc/host.h>
+
+struct sdhci_host {
+	/* Data set by hardware interface driver */
+	const char *hw_name;	/* Hardware bus name */
+
+	unsigned int quirks;	/* Deviations from spec. */
+
+/* Controller doesn't honor resets unless we touch the clock register */
+#define SDHCI_QUIRK_CLOCK_BEFORE_RESET			(1<<0)
+/* Controller has bad caps bits, but really supports DMA */
+#define SDHCI_QUIRK_FORCE_DMA				(1<<1)
+/* Controller doesn't like to be reset when there is no card inserted. */
+#define SDHCI_QUIRK_NO_CARD_NO_RESET			(1<<2)
+/* Controller doesn't like clearing the power reg before a change */
+#define SDHCI_QUIRK_SINGLE_POWER_WRITE			(1<<3)
+/* Controller has flaky internal state so reset it on each ios change */
+#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS		(1<<4)
+/* Controller has an unusable DMA engine */
+#define SDHCI_QUIRK_BROKEN_DMA				(1<<5)
+/* Controller has an unusable ADMA engine */
+#define SDHCI_QUIRK_BROKEN_ADMA				(1<<6)
+/* Controller can only DMA from 32-bit aligned addresses */
+#define SDHCI_QUIRK_32BIT_DMA_ADDR			(1<<7)
+/* Controller can only DMA chunk sizes that are a multiple of 32 bits */
+#define SDHCI_QUIRK_32BIT_DMA_SIZE			(1<<8)
+/* Controller can only ADMA chunks that are a multiple of 32 bits */
+#define SDHCI_QUIRK_32BIT_ADMA_SIZE			(1<<9)
+/* Controller needs to be reset after each request to stay stable */
+#define SDHCI_QUIRK_RESET_AFTER_REQUEST			(1<<10)
+/* Controller needs voltage and power writes to happen separately */
+#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER		(1<<11)
+/* Controller provides an incorrect timeout value for transfers */
+#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL			(1<<12)
+/* Controller has an issue with buffer bits for small transfers */
+#define SDHCI_QUIRK_BROKEN_SMALL_PIO			(1<<13)
+/* Controller does not provide transfer-complete interrupt when not busy */
+#define SDHCI_QUIRK_NO_BUSY_IRQ				(1<<14)
+/* Controller has unreliable card detection */
+#define SDHCI_QUIRK_BROKEN_CARD_DETECTION		(1<<15)
+/* Controller reports inverted write-protect state */
+#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT		(1<<16)
+/* Controller has nonstandard clock management */
+#define SDHCI_QUIRK_NONSTANDARD_CLOCK			(1<<17)
+/* Controller does not like fast PIO transfers */
+#define SDHCI_QUIRK_PIO_NEEDS_DELAY			(1<<18)
+/* Controller losing signal/interrupt enable states after reset */
+#define SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET		(1<<19)
+/* Controller has to be forced to use block size of 2048 bytes */
+#define SDHCI_QUIRK_FORCE_BLK_SZ_2048			(1<<20)
+/* Controller cannot do multi-block transfers */
+#define SDHCI_QUIRK_NO_MULTIBLOCK			(1<<21)
+/* Controller can only handle 1-bit data transfers */
+#define SDHCI_QUIRK_FORCE_1_BIT_DATA			(1<<22)
+/* Controller needs 10ms delay between applying power and clock */
+#define SDHCI_QUIRK_DELAY_AFTER_POWER			(1<<23)
+/* Controller uses SDCLK instead of TMCLK for data timeouts */
+#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK		(1<<24)
+/* Controller reports wrong base clock capability */
+#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN		(1<<25)
+/* Controller cannot support End Attribute in NOP ADMA descriptor */
+#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC		(1<<26)
+/* Controller is missing device caps. Use caps provided by host */
+#define SDHCI_QUIRK_MISSING_CAPS			(1<<27)
+/* Controller uses Auto CMD12 command to stop the transfer */
+#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12		(1<<28)
+/* Controller doesn't have HISPD bit field in HI-SPEED SD card */
+#define SDHCI_QUIRK_NO_HISPD_BIT			(1<<29)
+
+	int irq;		/* Device IRQ */
+	void __iomem *ioaddr;	/* Mapped address */
+
+	const struct sdhci_ops *ops;	/* Low level hw interface */
+
+	struct regulator *vmmc;	/* Power regulator */
+
+	/* Internal data */
+	struct mmc_host *mmc;	/* MMC structure */
+	u64 dma_mask;		/* custom DMA mask */
+
+#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
+	struct led_classdev led;	/* LED control */
+	char led_name[32];
+#endif
+
+	spinlock_t lock;	/* Mutex */
+
+	int flags;		/* Host attributes */
+#define SDHCI_USE_SDMA		(1<<0)	/* Host is SDMA capable */
+#define SDHCI_USE_ADMA		(1<<1)	/* Host is ADMA capable */
+#define SDHCI_REQ_USE_DMA	(1<<2)	/* Use DMA for this req. */
+#define SDHCI_DEVICE_DEAD	(1<<3)	/* Device unresponsive */
+
+	unsigned int version;	/* SDHCI spec. version */
+
+	unsigned int max_clk;	/* Max possible freq (MHz) */
+	unsigned int timeout_clk;	/* Timeout freq (KHz) */
+
+	unsigned int clock;	/* Current clock (MHz) */
+	u8 pwr;			/* Current voltage */
+
+	struct mmc_request *mrq;	/* Current request */
+	struct mmc_command *cmd;	/* Current command */
+	struct mmc_data *data;	/* Current data request */
+	unsigned int data_early:1;	/* Data finished before cmd */
+
+	struct sg_mapping_iter sg_miter;	/* SG state for PIO */
+	unsigned int blocks;	/* remaining PIO blocks */
+
+	int sg_count;		/* Mapped sg entries */
+
+	u8 *adma_desc;		/* ADMA descriptor table */
+	u8 *align_buffer;	/* Bounce buffer */
+
+	dma_addr_t adma_addr;	/* Mapped ADMA descr. table */
+	dma_addr_t align_addr;	/* Mapped bounce buffer */
+
+	struct tasklet_struct card_tasklet;	/* Tasklet structures */
+	struct tasklet_struct finish_tasklet;
+
+	struct timer_list timer;	/* Timer for timeouts */
+
+	unsigned int caps;	/* Alternative capabilities */
+
+	unsigned long private[0] ____cacheline_aligned;
+};
+#endif /* __SDHCI_H */