diff options
| author | Pierre Ossman <drzeus@drzeus.cx> | 2006-11-08 23:03:10 +0100 |
|---|---|---|
| committer | Pierre Ossman <drzeus@drzeus.cx> | 2006-12-01 18:53:37 +0100 |
| commit | 7ccd266e676a3f0c6f8f897f58b684cac3dd1650 (patch) | |
| tree | aba8632fc523c5c663a56876ce67c580ce8d38eb /include/linux/mmc | |
| parent | 73778120c4088a0a7b59c4c378904f7a230b4820 (diff) | |
mmc: Support for high speed SD cards
Modern SD cards support a clock speed of 50 MHz. Make sure we test for
this capability and do the song and dance required to activate it.
Activating high speed support actually modifies the TRAN_SPEED field
of the CSD. But as the spec says that the cards must report 50 MHz,
we might as well skip re-reading the CSD.
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Diffstat (limited to 'include/linux/mmc')
| -rw-r--r-- | include/linux/mmc/card.h | 7 | ||||
| -rw-r--r-- | include/linux/mmc/protocol.h | 22 |
2 files changed, 28 insertions, 1 deletions
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index ce25256f80d..d0e6a549761 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -50,6 +50,10 @@ struct sd_scr { #define SD_SCR_BUS_WIDTH_4 (1<<2) }; +struct sd_switch_caps { + unsigned int hs_max_dtr; +}; + struct mmc_host; /* @@ -66,7 +70,7 @@ struct mmc_card { #define MMC_STATE_BAD (1<<2) /* unrecognised device */ #define MMC_STATE_SDCARD (1<<3) /* is an SD card */ #define MMC_STATE_READONLY (1<<4) /* card is read-only */ -#define MMC_STATE_HIGHSPEED (1<<5) /* card is in mmc4 highspeed mode */ +#define MMC_STATE_HIGHSPEED (1<<5) /* card is in high speed mode */ u32 raw_cid[4]; /* raw card CID */ u32 raw_csd[4]; /* raw card CSD */ u32 raw_scr[2]; /* raw card SCR */ @@ -74,6 +78,7 @@ struct mmc_card { struct mmc_csd csd; /* card specific */ struct mmc_ext_csd ext_csd; /* mmc v4 extended card specific */ struct sd_scr scr; /* extra SD information */ + struct sd_switch_caps sw_caps; /* switch (CMD6) caps */ }; #define mmc_card_present(c) ((c)->state & MMC_STATE_PRESENT) diff --git a/include/linux/mmc/protocol.h b/include/linux/mmc/protocol.h index 45c51fd8578..2dce60c43f4 100644 --- a/include/linux/mmc/protocol.h +++ b/include/linux/mmc/protocol.h @@ -82,6 +82,7 @@ /* class 8 */ /* This is basically the same command as for MMC with some quirks. */ #define SD_SEND_RELATIVE_ADDR 3 /* bcr R6 */ +#define SD_SWITCH 6 /* adtc [31:0] See below R1 */ /* Application commands */ #define SD_APP_SET_BUS_WIDTH 6 /* ac [1:0] bus width R1 */ @@ -101,6 +102,19 @@ */ /* + * SD_SWITCH argument format: + * + * [31] Check (0) or switch (1) + * [30:24] Reserved (0) + * [23:20] Function group 6 + * [19:16] Function group 5 + * [15:12] Function group 4 + * [11:8] Function group 3 + * [7:4] Function group 2 + * [3:0] Function group 1 + */ + +/* MMC status in R1 Type e : error bit @@ -285,6 +299,14 @@ struct _mmc_csd { #define MMC_SWITCH_MODE_WRITE_BYTE 0x03 /* Set target to value */ /* + * SCR field definitions + */ + +#define SCR_SPEC_VER_0 0 /* Implements system specification 1.0 - 1.01 */ +#define SCR_SPEC_VER_1 1 /* Implements system specification 1.10 */ +#define SCR_SPEC_VER_2 2 /* Implements system specification 2.00 */ + +/* * SD bus widths */ #define SD_BUS_WIDTH_1 0 |