Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 226 insertions, 0 deletions

diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
new file mode 100644
index 00000000000..b3d134392b3
--- /dev/null
+++ b/include/linux/mtd/mtd.h
@@ -0,0 +1,226 @@
+/* 
+ * $Id: mtd.h,v 1.56 2004/08/09 18:46:04 dmarlin Exp $
+ *
+ * Copyright (C) 1999-2003 David Woodhouse <dwmw2@infradead.org> et al.
+ *
+ * Released under GPL
+ */
+
+#ifndef __MTD_MTD_H__
+#define __MTD_MTD_H__
+
+#ifndef __KERNEL__
+#error This is a kernel header. Perhaps include mtd-user.h instead?
+#endif
+
+#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/uio.h>
+
+#include <linux/mtd/compatmac.h>
+#include <mtd/mtd-abi.h>
+
+#define MTD_CHAR_MAJOR 90
+#define MTD_BLOCK_MAJOR 31
+#define MAX_MTD_DEVICES 16
+
+#define MTD_ERASE_PENDING      	0x01
+#define MTD_ERASING		0x02
+#define MTD_ERASE_SUSPEND	0x04
+#define MTD_ERASE_DONE          0x08
+#define MTD_ERASE_FAILED        0x10
+
+/* If the erase fails, fail_addr might indicate exactly which block failed.  If
+   fail_addr = 0xffffffff, the failure was not at the device level or was not
+   specific to any particular block. */
+struct erase_info {
+	struct mtd_info *mtd;
+	u_int32_t addr;
+	u_int32_t len;
+	u_int32_t fail_addr;
+	u_long time;
+	u_long retries;
+	u_int dev;
+	u_int cell;
+	void (*callback) (struct erase_info *self);
+	u_long priv;
+	u_char state;
+	struct erase_info *next;
+};
+
+struct mtd_erase_region_info {
+	u_int32_t offset;			/* At which this region starts, from the beginning of the MTD */
+	u_int32_t erasesize;		/* For this region */
+	u_int32_t numblocks;		/* Number of blocks of erasesize in this region */
+};
+
+struct mtd_info {
+	u_char type;
+	u_int32_t flags;
+	u_int32_t size;	 // Total size of the MTD
+
+	/* "Major" erase size for the device. Naïve users may take this
+	 * to be the only erase size available, or may use the more detailed
+	 * information below if they desire
+	 */
+	u_int32_t erasesize;
+
+	u_int32_t oobblock;  // Size of OOB blocks (e.g. 512)
+	u_int32_t oobsize;   // Amount of OOB data per block (e.g. 16)
+	u_int32_t oobavail;  // Number of bytes in OOB area available for fs 
+	u_int32_t ecctype;
+	u_int32_t eccsize;
+	
+
+	// Kernel-only stuff starts here.
+	char *name;
+	int index;
+
+	// oobinfo is a nand_oobinfo structure, which can be set by iotcl (MEMSETOOBINFO)
+	struct nand_oobinfo oobinfo;
+
+	/* Data for variable erase regions. If numeraseregions is zero,
+	 * it means that the whole device has erasesize as given above. 
+	 */
+	int numeraseregions;
+	struct mtd_erase_region_info *eraseregions; 
+
+	/* This really shouldn't be here. It can go away in 2.5 */
+	u_int32_t bank_size;
+
+	int (*erase) (struct mtd_info *mtd, struct erase_info *instr);
+
+	/* This stuff for eXecute-In-Place */
+	int (*point) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf);
+
+	/* We probably shouldn't allow XIP if the unpoint isn't a NULL */
+	void (*unpoint) (struct mtd_info *mtd, u_char * addr, loff_t from, size_t len);
+
+
+	int (*read) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
+	int (*write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
+
+	int (*read_ecc) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel);
+	int (*write_ecc) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel);
+
+	int (*read_oob) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
+	int (*write_oob) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
+
+	/* 
+	 * Methods to access the protection register area, present in some 
+	 * flash devices. The user data is one time programmable but the
+	 * factory data is read only. 
+	 */
+	int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
+
+	int (*read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
+
+	/* This function is not yet implemented */
+	int (*write_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
+
+	/* kvec-based read/write methods. We need these especially for NAND flash,
+	   with its limited number of write cycles per erase.
+	   NB: The 'count' parameter is the number of _vectors_, each of 
+	   which contains an (ofs, len) tuple.
+	*/
+	int (*readv) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from, size_t *retlen);
+	int (*readv_ecc) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from, 
+		size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
+	int (*writev) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen);
+	int (*writev_ecc) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, 
+		size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
+
+	/* Sync */
+	void (*sync) (struct mtd_info *mtd);
+
+	/* Chip-supported device locking */
+	int (*lock) (struct mtd_info *mtd, loff_t ofs, size_t len);
+	int (*unlock) (struct mtd_info *mtd, loff_t ofs, size_t len);
+
+	/* Power Management functions */
+	int (*suspend) (struct mtd_info *mtd);
+	void (*resume) (struct mtd_info *mtd);
+
+	/* Bad block management functions */
+	int (*block_isbad) (struct mtd_info *mtd, loff_t ofs);
+	int (*block_markbad) (struct mtd_info *mtd, loff_t ofs);
+
+	void *priv;
+
+	struct module *owner;
+	int usecount;
+};
+
+
+	/* Kernel-side ioctl definitions */
+
+extern int add_mtd_device(struct mtd_info *mtd);
+extern int del_mtd_device (struct mtd_info *mtd);
+
+extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
+
+extern void put_mtd_device(struct mtd_info *mtd);
+
+
+struct mtd_notifier {
+	void (*add)(struct mtd_info *mtd);
+	void (*remove)(struct mtd_info *mtd);
+	struct list_head list;
+};
+
+
+extern void register_mtd_user (struct mtd_notifier *new);
+extern int unregister_mtd_user (struct mtd_notifier *old);
+
+int default_mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
+		       unsigned long count, loff_t to, size_t *retlen);
+
+int default_mtd_readv(struct mtd_info *mtd, struct kvec *vecs,
+		      unsigned long count, loff_t from, size_t *retlen);
+
+#define MTD_ERASE(mtd, args...) (*(mtd->erase))(mtd, args)
+#define MTD_POINT(mtd, a,b,c,d) (*(mtd->point))(mtd, a,b,c, (u_char **)(d))
+#define MTD_UNPOINT(mtd, arg) (*(mtd->unpoint))(mtd, (u_char *)arg)
+#define MTD_READ(mtd, args...) (*(mtd->read))(mtd, args)
+#define MTD_WRITE(mtd, args...) (*(mtd->write))(mtd, args)
+#define MTD_READV(mtd, args...) (*(mtd->readv))(mtd, args)
+#define MTD_WRITEV(mtd, args...) (*(mtd->writev))(mtd, args)
+#define MTD_READECC(mtd, args...) (*(mtd->read_ecc))(mtd, args)
+#define MTD_WRITEECC(mtd, args...) (*(mtd->write_ecc))(mtd, args)
+#define MTD_READOOB(mtd, args...) (*(mtd->read_oob))(mtd, args)
+#define MTD_WRITEOOB(mtd, args...) (*(mtd->write_oob))(mtd, args)
+#define MTD_SYNC(mtd) do { if (mtd->sync) (*(mtd->sync))(mtd);  } while (0) 
+
+
+#ifdef CONFIG_MTD_PARTITIONS
+void mtd_erase_callback(struct erase_info *instr);
+#else
+static inline void mtd_erase_callback(struct erase_info *instr)
+{
+	if (instr->callback)
+		instr->callback(instr);
+}
+#endif
+
+/*
+ * Debugging macro and defines
+ */
+#define MTD_DEBUG_LEVEL0	(0)	/* Quiet   */
+#define MTD_DEBUG_LEVEL1	(1)	/* Audible */
+#define MTD_DEBUG_LEVEL2	(2)	/* Loud    */
+#define MTD_DEBUG_LEVEL3	(3)	/* Noisy   */
+
+#ifdef CONFIG_MTD_DEBUG
+#define DEBUG(n, args...)				\
+ 	do {						\
+		if (n <= CONFIG_MTD_DEBUG_VERBOSE)	\
+			printk(KERN_INFO args);		\
+	} while(0)
+#else /* CONFIG_MTD_DEBUG */
+#define DEBUG(n, args...) do { } while(0)
+
+#endif /* CONFIG_MTD_DEBUG */
+
+#endif /* __MTD_MTD_H__ */