[MTD] [NAND] sh_flctl: add support for Renesas SuperH FLCTL

Several Renesas SuperH CPU has FLCTL. The FLCTL support NAND Flash.
This driver support SH7723.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

1 files changed, 125 insertions, 0 deletions

diff --git a/include/linux/mtd/sh_flctl.h b/include/linux/mtd/sh_flctl.h
new file mode 100644
index 00000000000..e77c1cea404
--- /dev/null
+++ b/include/linux/mtd/sh_flctl.h
@@ -0,0 +1,125 @@
+/*
+ * SuperH FLCTL nand controller
+ *
+ * Copyright © 2008 Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef __SH_FLCTL_H__
+#define __SH_FLCTL_H__
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+/* FLCTL registers */
+#define FLCMNCR(f)		(f->reg + 0x0)
+#define FLCMDCR(f)		(f->reg + 0x4)
+#define FLCMCDR(f)		(f->reg + 0x8)
+#define FLADR(f)		(f->reg + 0xC)
+#define FLADR2(f)		(f->reg + 0x3C)
+#define FLDATAR(f)		(f->reg + 0x10)
+#define FLDTCNTR(f)		(f->reg + 0x14)
+#define FLINTDMACR(f)		(f->reg + 0x18)
+#define FLBSYTMR(f)		(f->reg + 0x1C)
+#define FLBSYCNT(f)		(f->reg + 0x20)
+#define FLDTFIFO(f)		(f->reg + 0x24)
+#define FLECFIFO(f)		(f->reg + 0x28)
+#define FLTRCR(f)		(f->reg + 0x2C)
+#define	FL4ECCRESULT0(f)	(f->reg + 0x80)
+#define	FL4ECCRESULT1(f)	(f->reg + 0x84)
+#define	FL4ECCRESULT2(f)	(f->reg + 0x88)
+#define	FL4ECCRESULT3(f)	(f->reg + 0x8C)
+#define	FL4ECCCR(f)		(f->reg + 0x90)
+#define	FL4ECCCNT(f)		(f->reg + 0x94)
+#define	FLERRADR(f)		(f->reg + 0x98)
+
+/* FLCMNCR control bits */
+#define ECCPOS2		(0x1 << 25)
+#define _4ECCCNTEN	(0x1 << 24)
+#define _4ECCEN		(0x1 << 23)
+#define _4ECCCORRECT	(0x1 << 22)
+#define SNAND_E		(0x1 << 18)	/* SNAND (0=512 1=2048)*/
+#define QTSEL_E		(0x1 << 17)
+#define ENDIAN		(0x1 << 16)	/* 1 = little endian */
+#define FCKSEL_E	(0x1 << 15)
+#define ECCPOS_00	(0x00 << 12)
+#define ECCPOS_01	(0x01 << 12)
+#define ECCPOS_02	(0x02 << 12)
+#define ACM_SACCES_MODE	(0x01 << 10)
+#define NANWF_E		(0x1 << 9)
+#define SE_D		(0x1 << 8)	/* Spare area disable */
+#define	CE1_ENABLE	(0x1 << 4)	/* Chip Enable 1 */
+#define	CE0_ENABLE	(0x1 << 3)	/* Chip Enable 0 */
+#define	TYPESEL_SET	(0x1 << 0)
+
+/* FLCMDCR control bits */
+#define ADRCNT2_E	(0x1 << 31)	/* 5byte address enable */
+#define ADRMD_E		(0x1 << 26)	/* Sector address access */
+#define CDSRC_E		(0x1 << 25)	/* Data buffer selection */
+#define DOSR_E		(0x1 << 24)	/* Status read check */
+#define SELRW		(0x1 << 21)	/*  0:read 1:write */
+#define DOADR_E		(0x1 << 20)	/* Address stage execute */
+#define ADRCNT_1	(0x00 << 18)	/* Address data bytes: 1byte */
+#define ADRCNT_2	(0x01 << 18)	/* Address data bytes: 2byte */
+#define ADRCNT_3	(0x02 << 18)	/* Address data bytes: 3byte */
+#define ADRCNT_4	(0x03 << 18)	/* Address data bytes: 4byte */
+#define DOCMD2_E	(0x1 << 17)	/* 2nd cmd stage execute */
+#define DOCMD1_E	(0x1 << 16)	/* 1st cmd stage execute */
+
+/* FLTRCR control bits */
+#define TRSTRT		(0x1 << 0)	/* translation start */
+#define TREND		(0x1 << 1)	/* translation end */
+
+/* FL4ECCCR control bits */
+#define	_4ECCFA		(0x1 << 2)	/* 4 symbols correct fault */
+#define	_4ECCEND	(0x1 << 1)	/* 4 symbols end */
+#define	_4ECCEXST	(0x1 << 0)	/* 4 symbols exist */
+
+#define INIT_FL4ECCRESULT_VAL	0x03FF03FF
+#define LOOP_TIMEOUT_MAX	0x00010000
+
+#define mtd_to_flctl(mtd)	container_of(mtd, struct sh_flctl, mtd)
+
+struct sh_flctl {
+	struct mtd_info		mtd;
+	struct nand_chip	chip;
+	void __iomem		*reg;
+
+	uint8_t	done_buff[2048 + 64];	/* max size 2048 + 64 */
+	int	read_bytes;
+	int	index;
+	int	seqin_column;		/* column in SEQIN cmd */
+	int	seqin_page_addr;	/* page_addr in SEQIN cmd */
+	uint32_t seqin_read_cmd;		/* read cmd in SEQIN cmd */
+	int	erase1_page_addr;	/* page_addr in ERASE1 cmd */
+	uint32_t erase_ADRCNT;		/* bits of FLCMDCR in ERASE1 cmd */
+	uint32_t rw_ADRCNT;	/* bits of FLCMDCR in READ WRITE cmd */
+
+	int	hwecc_cant_correct[4];
+
+	unsigned page_size:1;	/* NAND page size (0 = 512, 1 = 2048) */
+	unsigned hwecc:1;	/* Hardware ECC (0 = disabled, 1 = enabled) */
+};
+
+struct sh_flctl_platform_data {
+	struct mtd_partition	*parts;
+	int			nr_parts;
+	unsigned long		flcmncr_val;
+
+	unsigned has_hwecc:1;
+};
+
+#endif	/* __SH_FLCTL_H__ */