diff options
| author | Brian Norris <computersforpeace@gmail.com> | 2014-01-29 14:08:12 -0800 |
|---|---|---|
| committer | Brian Norris <computersforpeace@gmail.com> | 2014-03-10 22:42:22 -0700 |
| commit | 3dad2344e92c6e1aeae42df1c4824f307c51bcc7 (patch) | |
| tree | ca71a7005c582cd98eebf5e16049b125564925f5 /include/linux/mtd | |
| parent | 55e571bd0707fb6516d0e38598c9e51683e03ee9 (diff) | |
mtd: nand: force NAND_CMD_READID onto 8-bit bus
The NAND command helpers tend to automatically shift the column address
for x16 bus devices, since most commands expect a word address, not a
byte address. The Read ID command, however, expects an 8-bit address
(i.e., 0x00, 0x20, or 0x40 should not be translated to 0x00, 0x10, or
0x20).
This fixes the column address for a few drivers which imitate the
nand_base defaults. Note that I don't touch sh_flctl.c, since it already
handles this problem slightly differently (note its comment "READID is
always performed using an 8-bit bus").
I have not tested this patch, as I only have x8 parts up for testing at
this point. Hopefully that can change soon...
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Tested-By: Pekon Gupta <pekon@ti.com>
Diffstat (limited to 'include/linux/mtd')
| -rw-r--r-- | include/linux/mtd/nand.h | 10 |
1 files changed, 10 insertions, 0 deletions
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index a719686c9cc..c034dc4224c 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -832,4 +832,14 @@ static inline bool nand_is_slc(struct nand_chip *chip) { return chip->bits_per_cell == 1; } + +/** + * Check if the opcode's address should be sent only on the lower 8 bits + * @command: opcode to check + */ +static inline int nand_opcode_8bits(unsigned int command) +{ + return command == NAND_CMD_READID; +} + #endif /* __LINUX_MTD_NAND_H */ |