UAPI: (Scripted) Disintegrate include/linux

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>

1 files changed, 0 insertions, 208 deletions

diff --git a/include/linux/mtio.h b/include/linux/mtio.h
deleted file mode 100644
index 18543e2db06..00000000000
--- a/include/linux/mtio.h
+++ /dev/null
@@ -1,208 +0,0 @@
-/* 
- * linux/mtio.h header file for Linux. Written by H. Bergman
- *
- * Modified for special ioctls provided by zftape in September 1997
- * by C.-J. Heine.
- */
-
-#ifndef _LINUX_MTIO_H
-#define _LINUX_MTIO_H
-
-#include <linux/types.h>
-#include <linux/ioctl.h>
-
-/*
- * Structures and definitions for mag tape io control commands
- */
-
-/* structure for MTIOCTOP - mag tape op command */
-struct	mtop {
-	short	mt_op;		/* operations defined below */
-	int	mt_count;	/* how many of them */
-};
-
-/* Magnetic Tape operations [Not all operations supported by all drivers]: */
-#define MTRESET 0	/* +reset drive in case of problems */
-#define MTFSF	1	/* forward space over FileMark,
-			 * position at first record of next file 
-			 */
-#define MTBSF	2	/* backward space FileMark (position before FM) */
-#define MTFSR	3	/* forward space record */
-#define MTBSR	4	/* backward space record */
-#define MTWEOF	5	/* write an end-of-file record (mark) */
-#define MTREW	6	/* rewind */
-#define MTOFFL	7	/* rewind and put the drive offline (eject?) */
-#define MTNOP	8	/* no op, set status only (read with MTIOCGET) */
-#define MTRETEN 9	/* retension tape */
-#define MTBSFM	10	/* +backward space FileMark, position at FM */
-#define MTFSFM  11	/* +forward space FileMark, position at FM */
-#define MTEOM	12	/* goto end of recorded media (for appending files).
-			 * MTEOM positions after the last FM, ready for
-			 * appending another file.
-			 */
-#define MTERASE 13	/* erase tape -- be careful! */
-
-#define MTRAS1  14	/* run self test 1 (nondestructive) */
-#define MTRAS2	15	/* run self test 2 (destructive) */
-#define MTRAS3  16	/* reserved for self test 3 */
-
-#define MTSETBLK 20	/* set block length (SCSI) */
-#define MTSETDENSITY 21	/* set tape density (SCSI) */
-#define MTSEEK	22	/* seek to block (Tandberg, etc.) */
-#define MTTELL	23	/* tell block (Tandberg, etc.) */
-#define MTSETDRVBUFFER 24 /* set the drive buffering according to SCSI-2 */
-			/* ordinary buffered operation with code 1 */
-#define MTFSS	25	/* space forward over setmarks */
-#define MTBSS	26	/* space backward over setmarks */
-#define MTWSM	27	/* write setmarks */
-
-#define MTLOCK  28	/* lock the drive door */
-#define MTUNLOCK 29	/* unlock the drive door */
-#define MTLOAD  30	/* execute the SCSI load command */
-#define MTUNLOAD 31	/* execute the SCSI unload command */
-#define MTCOMPRESSION 32/* control compression with SCSI mode page 15 */
-#define MTSETPART 33	/* Change the active tape partition */
-#define MTMKPART  34	/* Format the tape with one or two partitions */
-#define MTWEOFI	35	/* write an end-of-file record (mark) in immediate mode */
-
-/* structure for MTIOCGET - mag tape get status command */
-
-struct	mtget {
-	long	mt_type;	/* type of magtape device */
-	long	mt_resid;	/* residual count: (not sure)
-				 *	number of bytes ignored, or
-				 *	number of files not skipped, or
-				 *	number of records not skipped.
-				 */
-	/* the following registers are device dependent */
-	long	mt_dsreg;	/* status register */
-	long	mt_gstat;	/* generic (device independent) status */
-	long	mt_erreg;	/* error register */
-	/* The next two fields are not always used */
-	__kernel_daddr_t mt_fileno;	/* number of current file on tape */
-	__kernel_daddr_t mt_blkno;	/* current block number */
-};
-
-
-
-/*
- * Constants for mt_type. Not all of these are supported,
- * and these are not all of the ones that are supported.
- */
-#define MT_ISUNKNOWN		0x01
-#define MT_ISQIC02		0x02	/* Generic QIC-02 tape streamer */
-#define MT_ISWT5150		0x03	/* Wangtek 5150EQ, QIC-150, QIC-02 */
-#define MT_ISARCHIVE_5945L2	0x04	/* Archive 5945L-2, QIC-24, QIC-02? */
-#define MT_ISCMSJ500		0x05	/* CMS Jumbo 500 (QIC-02?) */
-#define MT_ISTDC3610		0x06	/* Tandberg 6310, QIC-24 */
-#define MT_ISARCHIVE_VP60I	0x07	/* Archive VP60i, QIC-02 */
-#define MT_ISARCHIVE_2150L	0x08	/* Archive Viper 2150L */
-#define MT_ISARCHIVE_2060L	0x09	/* Archive Viper 2060L */
-#define MT_ISARCHIVESC499	0x0A	/* Archive SC-499 QIC-36 controller */
-#define MT_ISQIC02_ALL_FEATURES	0x0F	/* Generic QIC-02 with all features */
-#define MT_ISWT5099EEN24	0x11	/* Wangtek 5099-een24, 60MB, QIC-24 */
-#define MT_ISTEAC_MT2ST		0x12	/* Teac MT-2ST 155mb drive, Teac DC-1 card (Wangtek type) */
-#define MT_ISEVEREX_FT40A	0x32	/* Everex FT40A (QIC-40) */
-#define MT_ISDDS1		0x51	/* DDS device without partitions */
-#define MT_ISDDS2		0x52	/* DDS device with partitions */
-#define MT_ISONSTREAM_SC        0x61   /* OnStream SCSI tape drives (SC-x0)
-					  and SCSI emulated (DI, DP, USB) */
-#define MT_ISSCSI1		0x71	/* Generic ANSI SCSI-1 tape unit */
-#define MT_ISSCSI2		0x72	/* Generic ANSI SCSI-2 tape unit */
-
-/* QIC-40/80/3010/3020 ftape supported drives.
- * 20bit vendor ID + 0x800000 (see ftape-vendors.h)
- */
-#define MT_ISFTAPE_UNKNOWN	0x800000 /* obsolete */
-#define MT_ISFTAPE_FLAG	0x800000
-
-
-/* structure for MTIOCPOS - mag tape get position command */
-
-struct	mtpos {
-	long 	mt_blkno;	/* current block number */
-};
-
-
-/* mag tape io control commands */
-#define	MTIOCTOP	_IOW('m', 1, struct mtop)	/* do a mag tape op */
-#define	MTIOCGET	_IOR('m', 2, struct mtget)	/* get tape status */
-#define	MTIOCPOS	_IOR('m', 3, struct mtpos)	/* get tape position */
-
-
-/* Generic Mag Tape (device independent) status macros for examining
- * mt_gstat -- HP-UX compatible.
- * There is room for more generic status bits here, but I don't
- * know which of them are reserved. At least three or so should
- * be added to make this really useful.
- */
-#define GMT_EOF(x)              ((x) & 0x80000000)
-#define GMT_BOT(x)              ((x) & 0x40000000)
-#define GMT_EOT(x)              ((x) & 0x20000000)
-#define GMT_SM(x)               ((x) & 0x10000000)  /* DDS setmark */
-#define GMT_EOD(x)              ((x) & 0x08000000)  /* DDS EOD */
-#define GMT_WR_PROT(x)          ((x) & 0x04000000)
-/* #define GMT_ ? 		((x) & 0x02000000) */
-#define GMT_ONLINE(x)           ((x) & 0x01000000)
-#define GMT_D_6250(x)           ((x) & 0x00800000)
-#define GMT_D_1600(x)           ((x) & 0x00400000)
-#define GMT_D_800(x)            ((x) & 0x00200000)
-/* #define GMT_ ? 		((x) & 0x00100000) */
-/* #define GMT_ ? 		((x) & 0x00080000) */
-#define GMT_DR_OPEN(x)          ((x) & 0x00040000)  /* door open (no tape) */
-/* #define GMT_ ? 		((x) & 0x00020000) */
-#define GMT_IM_REP_EN(x)        ((x) & 0x00010000)  /* immediate report mode */
-#define GMT_CLN(x)              ((x) & 0x00008000)  /* cleaning requested */
-/* 15 generic status bits unused */
-
-
-/* SCSI-tape specific definitions */
-/* Bitfield shifts in the status  */
-#define MT_ST_BLKSIZE_SHIFT	0
-#define MT_ST_BLKSIZE_MASK	0xffffff
-#define MT_ST_DENSITY_SHIFT	24
-#define MT_ST_DENSITY_MASK	0xff000000
-
-#define MT_ST_SOFTERR_SHIFT	0
-#define MT_ST_SOFTERR_MASK	0xffff
-
-/* Bitfields for the MTSETDRVBUFFER ioctl */
-#define MT_ST_OPTIONS		0xf0000000
-#define MT_ST_BOOLEANS		0x10000000
-#define MT_ST_SETBOOLEANS	0x30000000
-#define MT_ST_CLEARBOOLEANS	0x40000000
-#define MT_ST_WRITE_THRESHOLD	0x20000000
-#define MT_ST_DEF_BLKSIZE	0x50000000
-#define MT_ST_DEF_OPTIONS	0x60000000
-#define MT_ST_TIMEOUTS		0x70000000
-#define MT_ST_SET_TIMEOUT	(MT_ST_TIMEOUTS | 0x000000)
-#define MT_ST_SET_LONG_TIMEOUT	(MT_ST_TIMEOUTS | 0x100000)
-#define MT_ST_SET_CLN		0x80000000
-
-#define MT_ST_BUFFER_WRITES	0x1
-#define MT_ST_ASYNC_WRITES	0x2
-#define MT_ST_READ_AHEAD	0x4
-#define MT_ST_DEBUGGING		0x8
-#define MT_ST_TWO_FM		0x10
-#define MT_ST_FAST_MTEOM	0x20
-#define MT_ST_AUTO_LOCK		0x40
-#define MT_ST_DEF_WRITES	0x80
-#define MT_ST_CAN_BSR		0x100
-#define MT_ST_NO_BLKLIMS	0x200
-#define MT_ST_CAN_PARTITIONS    0x400
-#define MT_ST_SCSI2LOGICAL      0x800
-#define MT_ST_SYSV              0x1000
-#define MT_ST_NOWAIT            0x2000
-#define MT_ST_SILI		0x4000
-#define MT_ST_NOWAIT_EOF	0x8000
-
-/* The mode parameters to be controlled. Parameter chosen with bits 20-28 */
-#define MT_ST_CLEAR_DEFAULT	0xfffff
-#define MT_ST_DEF_DENSITY	(MT_ST_DEF_OPTIONS | 0x100000)
-#define MT_ST_DEF_COMPRESSION	(MT_ST_DEF_OPTIONS | 0x200000)
-#define MT_ST_DEF_DRVBUFFER	(MT_ST_DEF_OPTIONS | 0x300000)
-
-/* The offset for the arguments for the special HP changer load command. */
-#define MT_ST_HPLOADER_OFFSET 10000
-
-#endif /* _LINUX_MTIO_H */