Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.26

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.26: (1090 commits)
  [NET]: Fix and allocate less memory for ->priv'less netdevices
  [IPV6]: Fix dangling references on error in fib6_add().
  [NETLABEL]: Fix NULL deref in netlbl_unlabel_staticlist_gen() if ifindex not found
  [PKT_SCHED]: Fix datalen check in tcf_simp_init().
  [INET]: Uninline the __inet_inherit_port call.
  [INET]: Drop the inet_inherit_port() call.
  SCTP: Initialize partial_bytes_acked to 0, when all of the data is acked.
  [netdrvr] forcedeth: internal simplifications; changelog removal
  phylib: factor out get_phy_id from within get_phy_device
  PHY: add BCM5464 support to broadcom PHY driver
  cxgb3: Fix __must_check warning with dev_dbg.
  tc35815: Statistics cleanup
  natsemi: fix MMIO for PPC 44x platforms
  [TIPC]: Cleanup of TIPC reference table code
  [TIPC]: Optimized initialization of TIPC reference table
  [TIPC]: Remove inlining of reference table locking routines
  e1000: convert uint16_t style integers to u16
  ixgb: convert uint16_t style integers to u16
  sb1000.c: make const arrays static
  sb1000.c: stop inlining largish static functions
  ...

1 files changed, 41 insertions, 20 deletions

diff --git a/include/linux/phy.h b/include/linux/phy.h
index 5e43ae75141..779cbcd65f6 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -39,7 +39,8 @@
 				 SUPPORTED_1000baseT_Half | \
 				 SUPPORTED_1000baseT_Full)
 
-/* Set phydev->irq to PHY_POLL if interrupts are not supported,
+/*
+ * Set phydev->irq to PHY_POLL if interrupts are not supported,
  * or not desired for this PHY.  Set to PHY_IGNORE_INTERRUPT if
  * the attached driver handles the interrupt
  */
@@ -63,8 +64,6 @@ typedef enum {
 	PHY_INTERFACE_MODE_RTBI
 } phy_interface_t;
 
-#define MII_BUS_MAX 4
-
 
 #define PHY_INIT_TIMEOUT	100000
 #define PHY_STATE_TIME		1
@@ -74,20 +73,30 @@ typedef enum {
 #define PHY_MAX_ADDR	32
 
 /* Used when trying to connect to a specific phy (mii bus id:phy device id) */
-#define PHY_ID_FMT "%x:%02x"
+#define PHY_ID_FMT "%s:%02x"
 
-/* The Bus class for PHYs.  Devices which provide access to
- * PHYs should register using this structure */
+/*
+ * Need to be a little smaller than phydev->dev.bus_id to leave room
+ * for the ":%02x"
+ */
+#define MII_BUS_ID_SIZE	(BUS_ID_SIZE - 3)
+
+/*
+ * The Bus class for PHYs.  Devices which provide access to
+ * PHYs should register using this structure
+ */
 struct mii_bus {
 	const char *name;
-	int id;
+	char id[MII_BUS_ID_SIZE];
 	void *priv;
 	int (*read)(struct mii_bus *bus, int phy_id, int regnum);
 	int (*write)(struct mii_bus *bus, int phy_id, int regnum, u16 val);
 	int (*reset)(struct mii_bus *bus);
 
-	/* A lock to ensure that only one thing can read/write
-	 * the MDIO bus at a time */
+	/*
+	 * A lock to ensure that only one thing can read/write
+	 * the MDIO bus at a time
+	 */
 	struct mutex mdio_lock;
 
 	struct device *dev;
@@ -98,8 +107,10 @@ struct mii_bus {
 	/* Phy addresses to be ignored when probing */
 	u32 phy_mask;
 
-	/* Pointer to an array of interrupts, each PHY's
-	 * interrupt at the index matching its address */
+	/*
+	 * Pointer to an array of interrupts, each PHY's
+	 * interrupt at the index matching its address
+	 */
 	int *irq;
 };
 
@@ -251,7 +262,8 @@ struct phy_device {
 	/* Bus address of the PHY (0-32) */
 	int addr;
 
-	/* forced speed & duplex (no autoneg)
+	/*
+	 * forced speed & duplex (no autoneg)
 	 * partner speed & duplex & pause (autoneg)
 	 */
 	int speed;
@@ -274,8 +286,10 @@ struct phy_device {
 
 	int link_timeout;
 
-	/* Interrupt number for this PHY
-	 * -1 means no interrupt */
+	/*
+	 * Interrupt number for this PHY
+	 * -1 means no interrupt
+	 */
 	int irq;
 
 	/* private data pointer */
@@ -325,22 +339,28 @@ struct phy_driver {
 	u32 features;
 	u32 flags;
 
-	/* Called to initialize the PHY,
-	 * including after a reset */
+	/*
+	 * Called to initialize the PHY,
+	 * including after a reset
+	 */
 	int (*config_init)(struct phy_device *phydev);
 
-	/* Called during discovery.  Used to set
-	 * up device-specific structures, if any */
+	/*
+	 * Called during discovery.  Used to set
+	 * up device-specific structures, if any
+	 */
 	int (*probe)(struct phy_device *phydev);
 
 	/* PHY Power Management */
 	int (*suspend)(struct phy_device *phydev);
 	int (*resume)(struct phy_device *phydev);
 
-	/* Configures the advertisement and resets
+	/*
+	 * Configures the advertisement and resets
 	 * autonegotiation if phydev->autoneg is on,
 	 * forces the speed to the current settings in phydev
-	 * if phydev->autoneg is off */
+	 * if phydev->autoneg is off
+	 */
 	int (*config_aneg)(struct phy_device *phydev);
 
 	/* Determines the negotiated speed and duplex */
@@ -361,6 +381,7 @@ struct phy_driver {
 
 int phy_read(struct phy_device *phydev, u16 regnum);
 int phy_write(struct phy_device *phydev, u16 regnum, u16 val);
+int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id);
 struct phy_device* get_phy_device(struct mii_bus *bus, int addr);
 int phy_clear_interrupt(struct phy_device *phydev);
 int phy_config_interrupt(struct phy_device *phydev, u32 interrupts);