ARM: plat-nomadik: move DMA40 header to <linux/platform_data>

This moves the DMA40 platform data header from <plat/ste_dma40.h>
to <linux/platform_data/dma-ste-dma40.h> where is belongs.

Cc: Dan Williams <djbw@fb.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Ola Lilja <ola.o.lilja@stericsson.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Andreas Westin <andreas.westin@stericsson.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 223 insertions, 0 deletions

diff --git a/include/linux/platform_data/dma-ste-dma40.h b/include/linux/platform_data/dma-ste-dma40.h
new file mode 100644
index 00000000000..9ff93b06568
--- /dev/null
+++ b/include/linux/platform_data/dma-ste-dma40.h
@@ -0,0 +1,223 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2007-2010
+ * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+
+#ifndef STE_DMA40_H
+#define STE_DMA40_H
+
+#include <linux/dmaengine.h>
+#include <linux/scatterlist.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+
+/*
+ * Maxium size for a single dma descriptor
+ * Size is limited to 16 bits.
+ * Size is in the units of addr-widths (1,2,4,8 bytes)
+ * Larger transfers will be split up to multiple linked desc
+ */
+#define STEDMA40_MAX_SEG_SIZE 0xFFFF
+
+/* dev types for memcpy */
+#define STEDMA40_DEV_DST_MEMORY (-1)
+#define	STEDMA40_DEV_SRC_MEMORY (-1)
+
+enum stedma40_mode {
+	STEDMA40_MODE_LOGICAL = 0,
+	STEDMA40_MODE_PHYSICAL,
+	STEDMA40_MODE_OPERATION,
+};
+
+enum stedma40_mode_opt {
+	STEDMA40_PCHAN_BASIC_MODE = 0,
+	STEDMA40_LCHAN_SRC_LOG_DST_LOG = 0,
+	STEDMA40_PCHAN_MODULO_MODE,
+	STEDMA40_PCHAN_DOUBLE_DST_MODE,
+	STEDMA40_LCHAN_SRC_PHY_DST_LOG,
+	STEDMA40_LCHAN_SRC_LOG_DST_PHY,
+};
+
+#define STEDMA40_ESIZE_8_BIT  0x0
+#define STEDMA40_ESIZE_16_BIT 0x1
+#define STEDMA40_ESIZE_32_BIT 0x2
+#define STEDMA40_ESIZE_64_BIT 0x3
+
+/* The value 4 indicates that PEN-reg shall be set to 0 */
+#define STEDMA40_PSIZE_PHY_1  0x4
+#define STEDMA40_PSIZE_PHY_2  0x0
+#define STEDMA40_PSIZE_PHY_4  0x1
+#define STEDMA40_PSIZE_PHY_8  0x2
+#define STEDMA40_PSIZE_PHY_16 0x3
+
+/*
+ * The number of elements differ in logical and
+ * physical mode
+ */
+#define STEDMA40_PSIZE_LOG_1  STEDMA40_PSIZE_PHY_2
+#define STEDMA40_PSIZE_LOG_4  STEDMA40_PSIZE_PHY_4
+#define STEDMA40_PSIZE_LOG_8  STEDMA40_PSIZE_PHY_8
+#define STEDMA40_PSIZE_LOG_16 STEDMA40_PSIZE_PHY_16
+
+/* Maximum number of possible physical channels */
+#define STEDMA40_MAX_PHYS 32
+
+enum stedma40_flow_ctrl {
+	STEDMA40_NO_FLOW_CTRL,
+	STEDMA40_FLOW_CTRL,
+};
+
+enum stedma40_periph_data_width {
+	STEDMA40_BYTE_WIDTH = STEDMA40_ESIZE_8_BIT,
+	STEDMA40_HALFWORD_WIDTH = STEDMA40_ESIZE_16_BIT,
+	STEDMA40_WORD_WIDTH = STEDMA40_ESIZE_32_BIT,
+	STEDMA40_DOUBLEWORD_WIDTH = STEDMA40_ESIZE_64_BIT
+};
+
+enum stedma40_xfer_dir {
+	STEDMA40_MEM_TO_MEM = 1,
+	STEDMA40_MEM_TO_PERIPH,
+	STEDMA40_PERIPH_TO_MEM,
+	STEDMA40_PERIPH_TO_PERIPH
+};
+
+
+/**
+ * struct stedma40_chan_cfg - dst/src channel configuration
+ *
+ * @big_endian: true if the src/dst should be read as big endian
+ * @data_width: Data width of the src/dst hardware
+ * @p_size: Burst size
+ * @flow_ctrl: Flow control on/off.
+ */
+struct stedma40_half_channel_info {
+	bool big_endian;
+	enum stedma40_periph_data_width data_width;
+	int psize;
+	enum stedma40_flow_ctrl flow_ctrl;
+};
+
+/**
+ * struct stedma40_chan_cfg - Structure to be filled by client drivers.
+ *
+ * @dir: MEM 2 MEM, PERIPH 2 MEM , MEM 2 PERIPH, PERIPH 2 PERIPH
+ * @high_priority: true if high-priority
+ * @realtime: true if realtime mode is to be enabled.  Only available on DMA40
+ * version 3+, i.e DB8500v2+
+ * @mode: channel mode: physical, logical, or operation
+ * @mode_opt: options for the chosen channel mode
+ * @src_dev_type: Src device type
+ * @dst_dev_type: Dst device type
+ * @src_info: Parameters for dst half channel
+ * @dst_info: Parameters for dst half channel
+ * @use_fixed_channel: if true, use physical channel specified by phy_channel
+ * @phy_channel: physical channel to use, only if use_fixed_channel is true
+ *
+ * This structure has to be filled by the client drivers.
+ * It is recommended to do all dma configurations for clients in the machine.
+ *
+ */
+struct stedma40_chan_cfg {
+	enum stedma40_xfer_dir			 dir;
+	bool					 high_priority;
+	bool					 realtime;
+	enum stedma40_mode			 mode;
+	enum stedma40_mode_opt			 mode_opt;
+	int					 src_dev_type;
+	int					 dst_dev_type;
+	struct stedma40_half_channel_info	 src_info;
+	struct stedma40_half_channel_info	 dst_info;
+
+	bool					 use_fixed_channel;
+	int					 phy_channel;
+};
+
+/**
+ * struct stedma40_platform_data - Configuration struct for the dma device.
+ *
+ * @dev_len: length of dev_tx and dev_rx
+ * @dev_tx: mapping between destination event line and io address
+ * @dev_rx: mapping between source event line and io address
+ * @memcpy: list of memcpy event lines
+ * @memcpy_len: length of memcpy
+ * @memcpy_conf_phy: default configuration of physical channel memcpy
+ * @memcpy_conf_log: default configuration of logical channel memcpy
+ * @disabled_channels: A vector, ending with -1, that marks physical channels
+ * that are for different reasons not available for the driver.
+ */
+struct stedma40_platform_data {
+	u32				 dev_len;
+	const dma_addr_t		*dev_tx;
+	const dma_addr_t		*dev_rx;
+	int				*memcpy;
+	u32				 memcpy_len;
+	struct stedma40_chan_cfg	*memcpy_conf_phy;
+	struct stedma40_chan_cfg	*memcpy_conf_log;
+	int				 disabled_channels[STEDMA40_MAX_PHYS];
+	bool				 use_esram_lcla;
+};
+
+#ifdef CONFIG_STE_DMA40
+
+/**
+ * stedma40_filter() - Provides stedma40_chan_cfg to the
+ * ste_dma40 dma driver via the dmaengine framework.
+ * does some checking of what's provided.
+ *
+ * Never directly called by client. It used by dmaengine.
+ * @chan: dmaengine handle.
+ * @data: Must be of type: struct stedma40_chan_cfg and is
+ * the configuration of the framework.
+ *
+ *
+ */
+
+bool stedma40_filter(struct dma_chan *chan, void *data);
+
+/**
+ * stedma40_slave_mem() - Transfers a raw data buffer to or from a slave
+ * (=device)
+ *
+ * @chan: dmaengine handle
+ * @addr: source or destination physicall address.
+ * @size: bytes to transfer
+ * @direction: direction of transfer
+ * @flags: is actually enum dma_ctrl_flags. See dmaengine.h
+ */
+
+static inline struct
+dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan,
+					    dma_addr_t addr,
+					    unsigned int size,
+					    enum dma_transfer_direction direction,
+					    unsigned long flags)
+{
+	struct scatterlist sg;
+	sg_init_table(&sg, 1);
+	sg.dma_address = addr;
+	sg.length = size;
+
+	return dmaengine_prep_slave_sg(chan, &sg, 1, direction, flags);
+}
+
+#else
+static inline bool stedma40_filter(struct dma_chan *chan, void *data)
+{
+	return false;
+}
+
+static inline struct
+dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan,
+					    dma_addr_t addr,
+					    unsigned int size,
+					    enum dma_transfer_direction direction,
+					    unsigned long flags)
+{
+	return NULL;
+}
+#endif
+
+#endif