[PATCH] md: raid10 read-error handling - resync and read-only

Add in correct read-error handling for resync and read-only situations.

When read-only, we don't over-write, so we need to mark the failed drive in
the r10_bio so we don't re-try it.  During resync, we always read all blocks,
so if there is a read error, we simply over-write it with the good block that
we found (assuming we found one).

Note that the recovery case still isn't handled in an interesting way.  There
is nothing useful to do for the 2-copies case.  If there are 3 or more copies,
then we could try reading from one of the non-missing copies, but this is a
bit complicated and very rarely would be used, so I'm leaving it for now.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 7 insertions, 0 deletions

diff --git a/include/linux/raid/raid10.h b/include/linux/raid/raid10.h
index dfa528385e3..b1103298a8c 100644
--- a/include/linux/raid/raid10.h
+++ b/include/linux/raid/raid10.h
@@ -104,6 +104,13 @@ struct r10bio_s {
 	} devs[0];
 };
 
+/* when we get a read error on a read-only array, we redirect to another
+ * device without failing the first device, or trying to over-write to
+ * correct the read error.  To keep track of bad blocks on a per-bio
+ * level, we store IO_BLOCKED in the appropriate 'bios' pointer
+ */
+#define IO_BLOCKED ((struct bio*)1)
+
 /* bits for r10bio.state */
 #define	R10BIO_Uptodate	0
 #define	R10BIO_IsSync	1