Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 58 insertions, 0 deletions

diff --git a/include/linux/scx200.h b/include/linux/scx200.h
new file mode 100644
index 00000000000..a22f9e173ad
--- /dev/null
+++ b/include/linux/scx200.h
@@ -0,0 +1,58 @@
+/* linux/include/linux/scx200.h
+
+   Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>
+
+   Defines for the National Semiconductor SCx200 Processors
+*/
+
+/* Interesting stuff for the National Semiconductor SCx200 CPU */
+
+extern unsigned scx200_cb_base;
+
+#define scx200_cb_present() (scx200_cb_base!=0)
+
+/* F0 PCI Header/Bridge Configuration Registers */
+#define SCx200_DOCCS_BASE 0x78	/* DOCCS Base Address Register */
+#define SCx200_DOCCS_CTRL 0x7c	/* DOCCS Control Register */
+
+/* GPIO Register Block */
+#define SCx200_GPIO_SIZE 0x2c	/* Size of GPIO register block */
+
+/* General Configuration Block */
+#define SCx200_CB_BASE_FIXED 0x9000	/* Base fixed at 0x9000 according to errata? */
+
+/* Watchdog Timer */
+#define SCx200_WDT_OFFSET 0x00	/* offset within configuration block */
+#define SCx200_WDT_SIZE 0x05	/* size */
+
+#define SCx200_WDT_WDTO 0x00	/* Time-Out Register */
+#define SCx200_WDT_WDCNFG 0x02	/* Configuration Register */
+#define SCx200_WDT_WDSTS 0x04	/* Status Register */
+#define SCx200_WDT_WDSTS_WDOVF (1<<0) /* Overflow bit */
+
+/* High Resolution Timer */
+#define SCx200_TIMER_OFFSET 0x08
+#define SCx200_TIMER_SIZE 0x05
+
+/* Clock Generators */
+#define SCx200_CLOCKGEN_OFFSET 0x10
+#define SCx200_CLOCKGEN_SIZE 0x10
+
+/* Pin Multiplexing and Miscellaneous Configuration Registers */
+#define SCx200_MISC_OFFSET 0x30
+#define SCx200_MISC_SIZE 0x10
+
+#define SCx200_PMR 0x30		/* Pin Multiplexing Register */
+#define SCx200_MCR 0x34		/* Miscellaneous Configuration Register */
+#define SCx200_INTSEL 0x38	/* Interrupt Selection Register */
+#define SCx200_IID 0x3c		/* IA On a Chip Identification Number Reg */
+#define SCx200_REV 0x3d		/* Revision Register */
+#define SCx200_CBA 0x3e		/* Configuration Base Address Register */
+#define SCx200_CBA_SCRATCH 0x64	/* Configuration Base Address Scratchpad */
+
+/*
+    Local variables:
+        compile-command: "make -C ../.. bzImage modules"
+        c-basic-offset: 8
+    End:
+*/