Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 72 insertions, 0 deletions

diff --git a/include/linux/sdlapci.h b/include/linux/sdlapci.h
new file mode 100644
index 00000000000..6f7c904f188
--- /dev/null
+++ b/include/linux/sdlapci.h
@@ -0,0 +1,72 @@
+/*****************************************************************************
+* sdlapci.h	WANPIPE(tm) Multiprotocol WAN Link Driver.
+*		Definitions for the SDLA PCI adapter.
+*
+* Author:	Gideon Hack	<ghack@sangoma.com>
+*
+* Copyright:	(c) 1999-2000 Sangoma Technologies Inc.
+*
+*		This program is free software; you can redistribute it and/or
+*		modify it under the terms of the GNU General Public License
+*		as published by the Free Software Foundation; either version
+*		2 of the License, or (at your option) any later version.
+* ============================================================================
+* Jun 02, 1999	Gideon Hack	Initial version.
+*****************************************************************************/
+#ifndef	_SDLAPCI_H
+#define	_SDLAPCI_H
+
+/****** Defines *************************************************************/
+
+/* Definitions for identifying and finding S514 PCI adapters */
+#define V3_VENDOR_ID		0x11B0		/* V3 vendor ID number */
+#define V3_DEVICE_ID  		0x0002		/* V3 device ID number */
+#define SANGOMA_SUBSYS_VENDOR 	0x4753		/* ID for Sangoma */
+#define PCI_DEV_SLOT_MASK	0x1F		/* mask for slot numbering */
+#define PCI_IRQ_NOT_ALLOCATED	0xFF		/* interrupt line for no IRQ */
+
+/* Local PCI register offsets */ 
+#define PCI_VENDOR_ID_WORD	0x00		/* vendor ID */
+#define PCI_IO_BASE_DWORD	0x10		/* IO base */	
+#define PCI_MEM_BASE0_DWORD	0x14		/* memory base - apperture 0 */
+#define PCI_MEM_BASE1_DWORD     0x18		/* memory base - apperture 1 */
+#define PCI_SUBSYS_VENDOR_WORD 	0x2C		/* subsystem vendor ID */
+#define PCI_INT_LINE_BYTE	0x3C		/* interrupt line */
+#define PCI_INT_PIN_BYTE	0x3D		/* interrupt pin */
+#define PCI_MAP0_DWORD		0x40		/* PCI to local bus address 0 */
+#define PCI_MAP1_DWORD          0x44		/* PCI to local bus address 1 */
+#define PCI_INT_STATUS          0x48		/* interrupt status */
+#define PCI_INT_CONFIG		0x4C		/* interrupt configuration */
+  
+/* Local PCI register usage */
+#define PCI_MEMORY_ENABLE	0x00000003	/* enable PCI memory */
+#define PCI_CPU_A_MEM_DISABLE	0x00000002	/* disable CPU A memory */
+#define PCI_CPU_B_MEM_DISABLE  	0x00100002	/* disable CPU B memory */
+#define PCI_ENABLE_IRQ_CPU_A	0x005A0004	/* enable IRQ for CPU A */
+#define PCI_ENABLE_IRQ_CPU_B    0x005A0008	/* enable IRQ for CPU B */
+#define PCI_DISABLE_IRQ_CPU_A   0x00000004	/* disable IRQ for CPU A */
+#define PCI_DISABLE_IRQ_CPU_B   0x00000008	/* disable IRQ for CPU B */
+ 
+/* Setting for the Interrupt Status register */  
+#define IRQ_CPU_A               0x04            /* IRQ for CPU A */
+#define IRQ_CPU_B               0x08		/* IRQ for CPU B */
+
+/* The maximum size of the S514 memory */
+#define MAX_SIZEOF_S514_MEMORY	(256 * 1024)
+
+/* S514 control register offsets within the memory address space */
+#define S514_CTRL_REG_BYTE	0x80000
+ 
+/* S514 adapter control bytes */
+#define S514_CPU_HALT 		0x00
+#define S514_CPU_START		0x01
+
+/* The maximum number of S514 adapters supported */
+#define MAX_S514_CARDS		20	
+
+#define PCI_CARD_TYPE		0x2E
+#define S514_DUAL_CPU		0x12
+#define S514_SINGLE_CPU		0x11
+
+#endif	/* _SDLAPCI_H */
+