Merge tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull TTY changes from Greg Kroah-Hartman:
 "As we skipped the merge window for 3.6-rc1 for the tty tree,
  everything is now settled down and working properly, so we are ready
  for 3.7-rc1.  Here's the patchset, it's big, but the large changes are
  removing a firmware file and adding a staging tty driver (it depended
  on the tty core changes, so it's going through this tree instead of
  the staging tree.)

  All of these patches have been in the linux-next tree for a while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up more-or-less trivial conflicts in
 - drivers/char/pcmcia/synclink_cs.c:
    tty NULL dereference fix vs tty_port_cts_enabled() helper function
 - drivers/staging/{Kconfig,Makefile}:
    add-add conflict (dgrp driver added close to other staging drivers)
 - drivers/staging/ipack/devices/ipoctal.c:
    "split ipoctal_channel from iopctal" vs "TTY: use tty_port_register_device"

* tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (235 commits)
  tty/serial: Add kgdb_nmi driver
  tty/serial/amba-pl011: Quiesce interrupts in poll_get_char
  tty/serial/amba-pl011: Implement poll_init callback
  tty/serial/core: Introduce poll_init callback
  kdb: Turn KGDB_KDB=n stubs into static inlines
  kdb: Implement disable_nmi command
  kernel/debug: Mask KGDB NMI upon entry
  serial: pl011: handle corruption at high clock speeds
  serial: sccnxp: Make 'default' choice in switch last
  serial: sccnxp: Remove mask termios caps for SW flow control
  serial: sccnxp: Report actual baudrate back to core
  serial: samsung: Add poll_get_char & poll_put_char
  Powerpc 8xx CPM_UART setting MAXIDL register proportionaly to baud rate
  Powerpc 8xx CPM_UART maxidl should not depend on fifo size
  Powerpc 8xx CPM_UART too many interrupts
  Powerpc 8xx CPM_UART desynchronisation
  serial: set correct baud_base for EXSYS EX-41092 Dual 16950
  serial: omap: fix the reciever line error case
  8250: blacklist Winbond CIR port
  8250_pnp: do pnp probe before legacy probe
  ...

1 files changed, 3 insertions, 78 deletions

diff --git a/include/linux/serial.h b/include/linux/serial.h
index 90e9f981358..861e51de476 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -12,9 +12,12 @@
 
 #include <linux/types.h>
 
+#include <linux/tty_flags.h>
+
 #ifdef __KERNEL__
 #include <asm/page.h>
 
+
 /*
  * Counters of the input lines (CTS, DSR, RI, CD) interrupts
  */
@@ -83,89 +86,11 @@ struct serial_struct {
 #define SERIAL_IO_HUB6	1
 #define SERIAL_IO_MEM	2
 
-struct serial_uart_config {
-	char	*name;
-	int	dfl_xmit_fifo_size;
-	int	flags;
-};
-
 #define UART_CLEAR_FIFO		0x01
 #define UART_USE_FIFO		0x02
 #define UART_STARTECH		0x04
 #define UART_NATSEMI		0x08
 
-/*
- * Definitions for async_struct (and serial_struct) flags field
- *
- * Define ASYNCB_* for convenient use with {test,set,clear}_bit.
- */
-#define ASYNCB_HUP_NOTIFY	 0 /* Notify getty on hangups and closes
-				    * on the callout port */
-#define ASYNCB_FOURPORT		 1 /* Set OU1, OUT2 per AST Fourport settings */
-#define ASYNCB_SAK		 2 /* Secure Attention Key (Orange book) */
-#define ASYNCB_SPLIT_TERMIOS	 3 /* Separate termios for dialin/callout */
-#define ASYNCB_SPD_HI		 4 /* Use 56000 instead of 38400 bps */
-#define ASYNCB_SPD_VHI		 5 /* Use 115200 instead of 38400 bps */
-#define ASYNCB_SKIP_TEST	 6 /* Skip UART test during autoconfiguration */
-#define ASYNCB_AUTO_IRQ		 7 /* Do automatic IRQ during
-				    * autoconfiguration */
-#define ASYNCB_SESSION_LOCKOUT	 8 /* Lock out cua opens based on session */
-#define ASYNCB_PGRP_LOCKOUT	 9 /* Lock out cua opens based on pgrp */
-#define ASYNCB_CALLOUT_NOHUP	10 /* Don't do hangups for cua device */
-#define ASYNCB_HARDPPS_CD	11 /* Call hardpps when CD goes high  */
-#define ASYNCB_SPD_SHI		12 /* Use 230400 instead of 38400 bps */
-#define ASYNCB_LOW_LATENCY	13 /* Request low latency behaviour */
-#define ASYNCB_BUGGY_UART	14 /* This is a buggy UART, skip some safety
-				    * checks.  Note: can be dangerous! */
-#define ASYNCB_AUTOPROBE	15 /* Port was autoprobed by PCI or PNP code */
-#define ASYNCB_LAST_USER	15
-
-/* Internal flags used only by kernel */
-#define ASYNCB_INITIALIZED	31 /* Serial port was initialized */
-#define ASYNCB_SUSPENDED	30 /* Serial port is suspended */
-#define ASYNCB_NORMAL_ACTIVE	29 /* Normal device is active */
-#define ASYNCB_BOOT_AUTOCONF	28 /* Autoconfigure port on bootup */
-#define ASYNCB_CLOSING		27 /* Serial port is closing */
-#define ASYNCB_CTS_FLOW		26 /* Do CTS flow control */
-#define ASYNCB_CHECK_CD		25 /* i.e., CLOCAL */
-#define ASYNCB_SHARE_IRQ	24 /* for multifunction cards, no longer used */
-#define ASYNCB_CONS_FLOW	23 /* flow control for console  */
-#define ASYNCB_FIRST_KERNEL	22
-
-#define ASYNC_HUP_NOTIFY	(1U << ASYNCB_HUP_NOTIFY)
-#define ASYNC_SUSPENDED		(1U << ASYNCB_SUSPENDED)
-#define ASYNC_FOURPORT		(1U << ASYNCB_FOURPORT)
-#define ASYNC_SAK		(1U << ASYNCB_SAK)
-#define ASYNC_SPLIT_TERMIOS	(1U << ASYNCB_SPLIT_TERMIOS)
-#define ASYNC_SPD_HI		(1U << ASYNCB_SPD_HI)
-#define ASYNC_SPD_VHI		(1U << ASYNCB_SPD_VHI)
-#define ASYNC_SKIP_TEST		(1U << ASYNCB_SKIP_TEST)
-#define ASYNC_AUTO_IRQ		(1U << ASYNCB_AUTO_IRQ)
-#define ASYNC_SESSION_LOCKOUT	(1U << ASYNCB_SESSION_LOCKOUT)
-#define ASYNC_PGRP_LOCKOUT	(1U << ASYNCB_PGRP_LOCKOUT)
-#define ASYNC_CALLOUT_NOHUP	(1U << ASYNCB_CALLOUT_NOHUP)
-#define ASYNC_HARDPPS_CD	(1U << ASYNCB_HARDPPS_CD)
-#define ASYNC_SPD_SHI		(1U << ASYNCB_SPD_SHI)
-#define ASYNC_LOW_LATENCY	(1U << ASYNCB_LOW_LATENCY)
-#define ASYNC_BUGGY_UART	(1U << ASYNCB_BUGGY_UART)
-#define ASYNC_AUTOPROBE		(1U << ASYNCB_AUTOPROBE)
-
-#define ASYNC_FLAGS		((1U << (ASYNCB_LAST_USER + 1)) - 1)
-#define ASYNC_USR_MASK		(ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \
-		ASYNC_LOW_LATENCY)
-#define ASYNC_SPD_CUST		(ASYNC_SPD_HI|ASYNC_SPD_VHI)
-#define ASYNC_SPD_WARP		(ASYNC_SPD_HI|ASYNC_SPD_SHI)
-#define ASYNC_SPD_MASK		(ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
-
-#define ASYNC_INITIALIZED	(1U << ASYNCB_INITIALIZED)
-#define ASYNC_NORMAL_ACTIVE	(1U << ASYNCB_NORMAL_ACTIVE)
-#define ASYNC_BOOT_AUTOCONF	(1U << ASYNCB_BOOT_AUTOCONF)
-#define ASYNC_CLOSING		(1U << ASYNCB_CLOSING)
-#define ASYNC_CTS_FLOW		(1U << ASYNCB_CTS_FLOW)
-#define ASYNC_CHECK_CD		(1U << ASYNCB_CHECK_CD)
-#define ASYNC_SHARE_IRQ		(1U << ASYNCB_SHARE_IRQ)
-#define ASYNC_CONS_FLOW		(1U << ASYNCB_CONS_FLOW)
-#define ASYNC_INTERNAL_FLAGS	(~((1U << ASYNCB_FIRST_KERNEL) - 1))
 
 /*
  * Multiport serial configuration structure --- external structure