Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma

Pull slave-dmaengine updates from Vinod Koul:
 "This pull brings:
   - Andy's DW driver updates
   - Guennadi's sh driver updates
   - Pl08x driver fixes from Tomasz & Alban
   - Improvements to mmp_pdma by Daniel
   - TI EDMA fixes by Joel
   - New drivers:
     - Hisilicon k3dma driver
     - Renesas rcar dma driver
  - New API for publishing slave driver capablities
  - Various fixes across the subsystem by Andy, Jingoo, Sachin etc..."

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (94 commits)
  dma: edma: Remove limits on number of slots
  dma: edma: Leave linked to Null slot instead of DUMMY slot
  dma: edma: Find missed events and issue them
  ARM: edma: Add function to manually trigger an EDMA channel
  dma: edma: Write out and handle MAX_NR_SG at a given time
  dma: edma: Setup parameters to DMA MAX_NR_SG at a time
  dmaengine: pl330: use dma_set_max_seg_size to set the sg limit
  dmaengine: dma_slave_caps: remove sg entries
  dma: replace devm_request_and_ioremap by devm_ioremap_resource
  dma: ste_dma40: Fix potential null pointer dereference
  dma: ste_dma40: Remove duplicate const
  dma: imx-dma: Remove redundant NULL check
  dma: dmagengine: fix function names in comments
  dma: add driver for R-Car HPB-DMAC
  dma: k3dma: use devm_ioremap_resource() instead of devm_request_and_ioremap()
  dma: imx-sdma: Staticize sdma_driver_data structures
  pch_dma: Add MODULE_DEVICE_TABLE
  dmaengine: PL08x: Add cyclic transfer support
  dmaengine: PL08x: Fix reading the byte count in cctl
  dmaengine: PL08x: Add support for different maximum transfer size
  ...

1 files changed, 33 insertions, 22 deletions

diff --git a/include/linux/sh_dma.h b/include/linux/sh_dma.h
index 4e83f3e034f..b7b43b82231 100644
--- a/include/linux/sh_dma.h
+++ b/include/linux/sh_dma.h
@@ -33,13 +33,44 @@ struct sh_dmae_slave_config {
 	char		mid_rid;
 };
 
+/**
+ * struct sh_dmae_channel - DMAC channel platform data
+ * @offset:		register offset within the main IOMEM resource
+ * @dmars:		channel DMARS register offset
+ * @chclr_offset:	channel CHCLR register offset
+ * @dmars_bit:		channel DMARS field offset within the register
+ * @chclr_bit:		bit position, to be set to reset the channel
+ */
 struct sh_dmae_channel {
 	unsigned int	offset;
 	unsigned int	dmars;
-	unsigned int	dmars_bit;
 	unsigned int	chclr_offset;
+	unsigned char	dmars_bit;
+	unsigned char	chclr_bit;
 };
 
+/**
+ * struct sh_dmae_pdata - DMAC platform data
+ * @slave:		array of slaves
+ * @slave_num:		number of slaves in the above array
+ * @channel:		array of DMA channels
+ * @channel_num:	number of channels in the above array
+ * @ts_low_shift:	shift of the low part of the TS field
+ * @ts_low_mask:	low TS field mask
+ * @ts_high_shift:	additional shift of the high part of the TS field
+ * @ts_high_mask:	high TS field mask
+ * @ts_shift:		array of Transfer Size shifts, indexed by TS value
+ * @ts_shift_num:	number of shifts in the above array
+ * @dmaor_init:		DMAOR initialisation value
+ * @chcr_offset:	CHCR address offset
+ * @chcr_ie_bit:	CHCR Interrupt Enable bit
+ * @dmaor_is_32bit:	DMAOR is a 32-bit register
+ * @needs_tend_set:	the TEND register has to be set
+ * @no_dmars:		DMAC has no DMARS registers
+ * @chclr_present:	DMAC has one or several CHCLR registers
+ * @chclr_bitwise:	channel CHCLR registers are bitwise
+ * @slave_only:		DMAC cannot be used for MEMCPY
+ */
 struct sh_dmae_pdata {
 	const struct sh_dmae_slave_config *slave;
 	int slave_num;
@@ -59,42 +90,22 @@ struct sh_dmae_pdata {
 	unsigned int needs_tend_set:1;
 	unsigned int no_dmars:1;
 	unsigned int chclr_present:1;
+	unsigned int chclr_bitwise:1;
 	unsigned int slave_only:1;
 };
 
-/* DMA register */
-#define SAR	0x00
-#define DAR	0x04
-#define TCR	0x08
-#define CHCR	0x0C
-#define DMAOR	0x40
-
-#define TEND	0x18 /* USB-DMAC */
-
 /* DMAOR definitions */
 #define DMAOR_AE	0x00000004
 #define DMAOR_NMIF	0x00000002
 #define DMAOR_DME	0x00000001
 
 /* Definitions for the SuperH DMAC */
-#define REQ_L	0x00000000
-#define REQ_E	0x00080000
-#define RACK_H	0x00000000
-#define RACK_L	0x00040000
-#define ACK_R	0x00000000
-#define ACK_W	0x00020000
-#define ACK_H	0x00000000
-#define ACK_L	0x00010000
 #define DM_INC	0x00004000
 #define DM_DEC	0x00008000
 #define DM_FIX	0x0000c000
 #define SM_INC	0x00001000
 #define SM_DEC	0x00002000
 #define SM_FIX	0x00003000
-#define RS_IN	0x00000200
-#define RS_OUT	0x00000300
-#define TS_BLK	0x00000040
-#define TM_BUR	0x00000020
 #define CHCR_DE	0x00000001
 #define CHCR_TE	0x00000002
 #define CHCR_IE	0x00000004