summaryrefslogtreecommitdiffstats
path: root/include/linux/ssb/ssb.h
diff options
context:
space:
mode:
authorLarry Finger <Larry.Finger@lwfinger.net>2007-11-09 16:58:20 -0600
committerDavid S. Miller <davem@davemloft.net>2008-01-28 15:04:44 -0800
commitd3c319f9c8d9ee2c042c60b8a1bbd909dcc42782 (patch)
treea80dc345690edae76d7eea864ec25966869b08b3 /include/linux/ssb/ssb.h
parent7797aa384870e3bb5bfd3b6a0eae61e7c7a4c993 (diff)
ssb: Remove the old, now unused, data structures
The old, now unused, data structures and SPROM extraction routines are removed. Signed-off-by: Larry Finger<Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'include/linux/ssb/ssb.h')
-rw-r--r--include/linux/ssb/ssb.h74
1 files changed, 0 insertions, 74 deletions
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index 745de2aac85..a21ab29ff36 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -15,72 +15,8 @@ struct pcmcia_device;
struct ssb_bus;
struct ssb_driver;
-
-struct ssb_sprom_r1 {
- u16 pci_spid; /* Subsystem Product ID for PCI */
- u16 pci_svid; /* Subsystem Vendor ID for PCI */
- u16 pci_pid; /* Product ID for PCI */
- u8 il0mac[6]; /* MAC address for 802.11b/g */
- u8 et0mac[6]; /* MAC address for Ethernet */
- u8 et1mac[6]; /* MAC address for 802.11a */
- u8 et0phyaddr:5; /* MII address for enet0 */
- u8 et1phyaddr:5; /* MII address for enet1 */
- u8 et0mdcport:1; /* MDIO for enet0 */
- u8 et1mdcport:1; /* MDIO for enet1 */
- u8 board_rev; /* Board revision */
- u8 country_code:4; /* Country Code */
- u8 antenna_a:2; /* Antenna 0/1 available for A-PHY */
- u8 antenna_bg:2; /* Antenna 0/1 available for B-PHY and G-PHY */
- u16 pa0b0;
- u16 pa0b1;
- u16 pa0b2;
- u16 pa1b0;
- u16 pa1b1;
- u16 pa1b2;
- u8 gpio0; /* GPIO pin 0 */
- u8 gpio1; /* GPIO pin 1 */
- u8 gpio2; /* GPIO pin 2 */
- u8 gpio3; /* GPIO pin 3 */
- u16 maxpwr_a; /* A-PHY Power Amplifier Max Power (in dBm Q5.2) */
- u16 maxpwr_bg; /* B/G-PHY Power Amplifier Max Power (in dBm Q5.2) */
- u8 itssi_a; /* Idle TSSI Target for A-PHY */
- u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */
- u16 boardflags_lo; /* Boardflags (low 16 bits) */
- u8 antenna_gain_a; /* A-PHY Antenna gain (in dBm Q5.2) */
- u8 antenna_gain_bg; /* B/G-PHY Antenna gain (in dBm Q5.2) */
- u8 oem[8]; /* OEM string (rev 1 only) */
-};
-
-struct ssb_sprom_r2 {
- u16 boardflags_hi; /* Boardflags (high 16 bits) */
- u8 maxpwr_a_lo; /* A-PHY Max Power Low */
- u8 maxpwr_a_hi; /* A-PHY Max Power High */
- u16 pa1lob0; /* A-PHY PA Low Settings */
- u16 pa1lob1; /* A-PHY PA Low Settings */
- u16 pa1lob2; /* A-PHY PA Low Settings */
- u16 pa1hib0; /* A-PHY PA High Settings */
- u16 pa1hib1; /* A-PHY PA High Settings */
- u16 pa1hib2; /* A-PHY PA High Settings */
- u8 ofdm_pwr_off; /* OFDM Power Offset from CCK Level */
- u8 country_str[2]; /* Two char Country Code */
-};
-
-struct ssb_sprom_r3 {
- u32 ofdmapo; /* A-PHY OFDM Mid Power Offset */
- u32 ofdmalpo; /* A-PHY OFDM Low Power Offset */
- u32 ofdmahpo; /* A-PHY OFDM High Power Offset */
- u8 gpioldc_on_cnt; /* GPIO LED Powersave Duty Cycle ON count */
- u8 gpioldc_off_cnt; /* GPIO LED Powersave Duty Cycle OFF count */
- u8 cckpo_1M:4; /* CCK Power Offset for Rate 1M */
- u8 cckpo_2M:4; /* CCK Power Offset for Rate 2M */
- u8 cckpo_55M:4; /* CCK Power Offset for Rate 5.5M */
- u8 cckpo_11M:4; /* CCK Power Offset for Rate 11M */
- u32 ofdmgpo; /* G-PHY OFDM Power Offset */
-};
-
struct ssb_sprom {
u8 revision;
- u8 temp_fill[2 * sizeof(struct ssb_sprom_r1)];
u8 il0mac[6]; /* MAC address for 802.11b/g */
u8 et0mac[6]; /* MAC address for Ethernet */
u8 et1mac[6]; /* MAC address for 802.11a */
@@ -106,16 +42,6 @@ struct ssb_sprom {
u8 antenna_gain_bg; /* B/G-PHY Antenna gain (in dBm Q5.2) */
/* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */
- /* The valid r# fields are selected by the "revision".
- * Revision 3 and lower inherit from lower revisions.
- */
- union {
- struct {
- struct ssb_sprom_r1 r1;
- struct ssb_sprom_r2 r2;
- struct ssb_sprom_r3 r3;
- };
- };
};
/* Information about the PCB the circuitry is soldered on. */