diff options
| author | Dan Williams <dan.j.williams@intel.com> | 2013-12-05 17:07:27 -0800 |
|---|---|---|
| committer | Sarah Sharp <sarah.a.sharp@linux.intel.com> | 2013-12-10 13:54:37 -0800 |
| commit | 48fc7dbd52c0559647291f33a10ccdc6cdbe4c72 (patch) | |
| tree | 4a2403420a69b2d40e38a53302771ec3d3eb6b66 /include/linux/usb | |
| parent | 40fcd88b8d49fd911518190c985112097d3a8a17 (diff) | |
usb: xhci: change enumeration scheme to 'new scheme' by default
Change the default enumeration scheme for xhci attached non-SuperSpeed
devices from:
Reset
SetAddress [xhci address-device BSR = 0]
GetDescriptor(8)
GetDescriptor(18)
...to:
Reset
[xhci address-device BSR = 1]
GetDescriptor(64)
Reset
SetAddress [xhci address-device BSR = 0]
GetDescriptor(18)
...as some devices misbehave when encountering a SetAddress command
prior to GetDescriptor. There are known legacy devices that require
this scheme, but testing has found at least one USB3 device that fails
enumeration when presented with this ordering. For now, follow the ehci
case and enable 'new scheme' by default for non-SuperSpeed devices.
To support this enumeration scheme on xhci the AddressDevice operation
needs to be performed twice. The first instance of the command enables
the HC's device and slot context info for the device, but omits sending
the device a SetAddress command (BSR == block set address request).
Then, after GetDescriptor completes, follow up with the full
AddressDevice+SetAddress operation.
As mentioned before, this ordering of events with USB3 devices causes an
extra state transition to be exposed to xhci. Previously USB3 devices
would transition directly from 'enabled' to 'addressed' and never need
to underrun responses to 'get descriptor'. We do see the 64-byte
descriptor fetch the correct data, but the following 18-byte descriptor
read after the reset gets:
bLength = 0
bDescriptorType = 0
bcdUSB = 0
bDeviceClass = 0
bDeviceSubClass = 0
bDeviceProtocol = 0
bMaxPacketSize0 = 9
instead of:
bLength = 12
bDescriptorType = 1
bcdUSB = 300
bDeviceClass = 0
bDeviceSubClass = 0
bDeviceProtocol = 0
bMaxPacketSize0 = 9
which results in the discovery process looping until falling back to
'old scheme' enumeration.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: David Moore <david.moore@gmail.com>
Suggested-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Diffstat (limited to 'include/linux/usb')
| -rw-r--r-- | include/linux/usb/hcd.h | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 758ce80d085..efe8d8a7c7a 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -353,6 +353,8 @@ struct hc_driver { void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *); /* Returns the hardware-chosen device address */ int (*address_device)(struct usb_hcd *, struct usb_device *udev); + /* prepares the hardware to send commands to the device */ + int (*enable_device)(struct usb_hcd *, struct usb_device *udev); /* Notifies the HCD after a hub descriptor is fetched. * Will block. */ |