Merge branch 'master' of /home/davem/src/GIT/linux-2.6/

Conflicts:
	drivers/net/wimax/i2400m/usb-notif.c

6 files changed, 206 insertions, 5 deletions

diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index 9b42baed390..b145119a90d 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -102,7 +102,7 @@
 #define USB_REQ_LOOPBACK_DATA_READ	0x16
 #define USB_REQ_SET_INTERFACE_DS	0x17
 
-/* The Link Power Mangement (LPM) ECN defines USB_REQ_TEST_AND_SET command,
+/* The Link Power Management (LPM) ECN defines USB_REQ_TEST_AND_SET command,
  * used by hubs to put ports into a new L1 suspend state, except that it
  * forgot to define its number ...
  */
@@ -353,6 +353,185 @@ struct usb_endpoint_descriptor {
 #define USB_ENDPOINT_XFER_INT		3
 #define USB_ENDPOINT_MAX_ADJUSTABLE	0x80
 
+/*-------------------------------------------------------------------------*/
+
+/**
+ * usb_endpoint_num - get the endpoint's number
+ * @epd: endpoint to be checked
+ *
+ * Returns @epd's number: 0 to 15.
+ */
+static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd)
+{
+	return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+}
+
+/**
+ * usb_endpoint_type - get the endpoint's transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns one of USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT} according
+ * to @epd's transfer type.
+ */
+static inline int usb_endpoint_type(const struct usb_endpoint_descriptor *epd)
+{
+	return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+}
+
+/**
+ * usb_endpoint_dir_in - check if the endpoint has IN direction
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type IN, otherwise it returns false.
+ */
+static inline int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd)
+{
+	return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN);
+}
+
+/**
+ * usb_endpoint_dir_out - check if the endpoint has OUT direction
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type OUT, otherwise it returns false.
+ */
+static inline int usb_endpoint_dir_out(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT);
+}
+
+/**
+ * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type bulk, otherwise it returns false.
+ */
+static inline int usb_endpoint_xfer_bulk(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+		USB_ENDPOINT_XFER_BULK);
+}
+
+/**
+ * usb_endpoint_xfer_control - check if the endpoint has control transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type control, otherwise it returns false.
+ */
+static inline int usb_endpoint_xfer_control(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+		USB_ENDPOINT_XFER_CONTROL);
+}
+
+/**
+ * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type interrupt, otherwise it returns
+ * false.
+ */
+static inline int usb_endpoint_xfer_int(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+		USB_ENDPOINT_XFER_INT);
+}
+
+/**
+ * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type isochronous, otherwise it returns
+ * false.
+ */
+static inline int usb_endpoint_xfer_isoc(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+		USB_ENDPOINT_XFER_ISOC);
+}
+
+/**
+ * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has bulk transfer type and IN direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_bulk_in(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd));
+}
+
+/**
+ * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has bulk transfer type and OUT direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_bulk_out(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd));
+}
+
+/**
+ * usb_endpoint_is_int_in - check if the endpoint is interrupt IN
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has interrupt transfer type and IN direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_int_in(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd));
+}
+
+/**
+ * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has interrupt transfer type and OUT direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_int_out(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd));
+}
+
+/**
+ * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has isochronous transfer type and IN direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_isoc_in(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd));
+}
+
+/**
+ * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has isochronous transfer type and OUT direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_isoc_out(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd));
+}
 
 /*-------------------------------------------------------------------------*/
 
@@ -584,8 +763,8 @@ enum usb_device_state {
 	/* chapter 9 and authentication (wireless) device states */
 	USB_STATE_ATTACHED,
 	USB_STATE_POWERED,			/* wired */
-	USB_STATE_UNAUTHENTICATED,		/* auth */
 	USB_STATE_RECONNECTING,			/* auth */
+	USB_STATE_UNAUTHENTICATED,		/* auth */
 	USB_STATE_DEFAULT,			/* limited function */
 	USB_STATE_ADDRESS,
 	USB_STATE_CONFIGURED,			/* most functions */
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index 935c380ffe4..acd7b0f06c8 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -244,6 +244,10 @@ int usb_add_config(struct usb_composite_dev *,
  *	value; it should return zero on successful initialization.
  * @unbind: Reverses @bind(); called as a side effect of unregistering
  *	this driver.
+ * @suspend: Notifies when the host stops sending USB traffic,
+ *	after function notifications
+ * @resume: Notifies configuration when the host restarts USB traffic,
+ *	before function notifications
  *
  * Devices default to reporting self powered operation.  Devices which rely
  * on bus powered operation should report this in their @bind() method.
@@ -268,6 +272,10 @@ struct usb_composite_driver {
 
 	int			(*bind)(struct usb_composite_dev *);
 	int			(*unbind)(struct usb_composite_dev *);
+
+	/* global suspend hooks */
+	void			(*suspend)(struct usb_composite_dev *);
+	void			(*resume)(struct usb_composite_dev *);
 };
 
 extern int usb_composite_register(struct usb_composite_driver *);
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 0460a746480..bbf45d500b6 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -598,6 +598,7 @@ static inline int usb_gadget_clear_selfpowered(struct usb_gadget *gadget)
 /**
  * usb_gadget_vbus_connect - Notify controller that VBUS is powered
  * @gadget:The device which now has VBUS power.
+ * Context: can sleep
  *
  * This call is used by a driver for an external transceiver (or GPIO)
  * that detects a VBUS power session starting.  Common responses include
@@ -636,6 +637,7 @@ static inline int usb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
 /**
  * usb_gadget_vbus_disconnect - notify controller about VBUS session end
  * @gadget:the device whose VBUS supply is being described
+ * Context: can sleep
  *
  * This call is used by a driver for an external transceiver (or GPIO)
  * that detects a VBUS power session ending.  Common responses include
@@ -792,19 +794,20 @@ struct usb_gadget_driver {
 /**
  * usb_gadget_register_driver - register a gadget driver
  * @driver:the driver being registered
+ * Context: can sleep
  *
  * Call this in your gadget driver's module initialization function,
  * to tell the underlying usb controller driver about your driver.
  * The driver's bind() function will be called to bind it to a
  * gadget before this registration call returns.  It's expected that
  * the bind() functions will be in init sections.
- * This function must be called in a context that can sleep.
  */
 int usb_gadget_register_driver(struct usb_gadget_driver *driver);
 
 /**
  * usb_gadget_unregister_driver - unregister a gadget driver
  * @driver:the driver being unregistered
+ * Context: can sleep
  *
  * Call this in your gadget driver's module cleanup function,
  * to tell the underlying usb controller that your driver is
@@ -813,7 +816,6 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver);
  * to unbind() and clean up any device state, before this procedure
  * finally returns.  It's expected that the unbind() functions
  * will in in exit sections, so may not be linked in some kernels.
- * This function must be called in a context that can sleep.
  */
 int usb_gadget_unregister_driver(struct usb_gadget_driver *driver);
 
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index 94df4fe6c6c..1aaa826396a 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -80,12 +80,17 @@ struct otg_transceiver {
 
 /* for board-specific init logic */
 extern int otg_set_transceiver(struct otg_transceiver *);
+#ifdef CONFIG_NOP_USB_XCEIV
+extern void usb_nop_xceiv_register(void);
+extern void usb_nop_xceiv_unregister(void);
+#endif
 
 
 /* for usb host and peripheral controller drivers */
 extern struct otg_transceiver *otg_get_transceiver(void);
 extern void otg_put_transceiver(struct otg_transceiver *);
 
+/* Context: can sleep */
 static inline int
 otg_start_hnp(struct otg_transceiver *otg)
 {
@@ -102,6 +107,8 @@ otg_set_host(struct otg_transceiver *otg, struct usb_bus *host)
 
 
 /* for usb peripheral controller drivers */
+
+/* Context: can sleep */
 static inline int
 otg_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *periph)
 {
@@ -114,6 +121,7 @@ otg_set_power(struct otg_transceiver *otg, unsigned mA)
 	return otg->set_power(otg, mA);
 }
 
+/* Context: can sleep */
 static inline int
 otg_set_suspend(struct otg_transceiver *otg, int suspend)
 {
diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h
index 7f6c603db65..2526f3bbd27 100644
--- a/include/linux/usb/quirks.h
+++ b/include/linux/usb/quirks.h
@@ -16,4 +16,7 @@
 /* device can't handle Set-Interface requests */
 #define USB_QUIRK_NO_SET_INTF		0x00000004
 
+/* device can't handle its Configuration or Interface strings */
+#define USB_QUIRK_CONFIG_INTF_STRINGS	0x00000008
+
 #endif /* __LINUX_USB_QUIRKS_H */
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 0b8617a9176..b9584254259 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -130,7 +130,8 @@ struct usb_serial {
 	struct usb_device		*dev;
 	struct usb_serial_driver	*type;
 	struct usb_interface		*interface;
-	unsigned char			disconnected;
+	unsigned char			disconnected:1;
+	unsigned char			suspending:1;
 	unsigned char			minor;
 	unsigned char			num_ports;
 	unsigned char			num_port_pointers;