Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (141 commits)
  USB: mct_u232: fix broken close
  USB: gadget: amd5536udc.c: fix error path
  USB: imx21-hcd - fix off by one resource size calculation
  usb: gadget: fix Kconfig warning
  usb: r8a66597-udc: Add processing when USB was removed.
  mxc_udc: add workaround for ENGcm09152 for i.MX35
  USB: ftdi_sio: add device ids for ScienceScope
  USB: musb: AM35x: Workaround for fifo read issue
  USB: musb: add musb support for AM35x
  USB: AM35x: Add musb support
  usb: Fix linker errors with CONFIG_PM=n
  USB: ohci-sh - use resource_size instead of defining its own resource_len macro
  USB: isp1362-hcd - use resource_size instead of defining its own resource_len macro
  USB: isp116x-hcd - use resource_size instead of defining its own resource_len macro
  USB: xhci: Fix compile error when CONFIG_PM=n
  USB: accept some invalid ep0-maxpacket values
  USB: xHCI: PCI power management implementation
  USB: xHCI: bus power management implementation
  USB: xHCI: port remote wakeup implementation
  USB: xHCI: port power management implementation
  ...

Manually fix up (non-data) conflict: the SCSI merge gad renamed the
'hw_sector_size' member to 'physical_block_size', and the USB tree
brought a new use of it.

13 files changed, 577 insertions, 198 deletions

diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index 28e33fea510..4eb56ed75fb 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -58,17 +58,35 @@ enum fsl_usb2_phy_modes {
 	FSL_USB2_PHY_SERIAL,
 };
 
+struct clk;
+struct platform_device;
+
 struct fsl_usb2_platform_data {
 	/* board specific information */
 	enum fsl_usb2_operating_modes	operating_mode;
 	enum fsl_usb2_phy_modes		phy_mode;
 	unsigned int			port_enables;
+	unsigned int			workaround;
+
+	int		(*init)(struct platform_device *);
+	void		(*exit)(struct platform_device *);
+	void __iomem	*regs;		/* ioremap'd register base */
+	struct clk	*clk;
+	unsigned	big_endian_mmio:1;
+	unsigned	big_endian_desc:1;
+	unsigned	es:1;		/* need USBMODE:ES */
+	unsigned	le_setup_buf:1;
+	unsigned	have_sysif_regs:1;
+	unsigned	invert_drvvbus:1;
+	unsigned	invert_pwr_fault:1;
 };
 
 /* Flags in fsl_usb2_mph_platform_data */
 #define FSL_USB2_PORT0_ENABLED	0x00000001
 #define FSL_USB2_PORT1_ENABLED	0x00000002
 
+#define FLS_USB2_WORKAROUND_ENGCM09152	(1 << 0)
+
 struct spi_device;
 
 struct fsl_spi_platform_data {
diff --git a/include/linux/init.h b/include/linux/init.h
index de994304e0b..577671c5515 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -46,16 +46,23 @@
 #define __exitdata	__section(.exit.data)
 #define __exit_call	__used __section(.exitcall.exit)
 
-/* modpost check for section mismatches during the kernel build.
+/*
+ * modpost check for section mismatches during the kernel build.
  * A section mismatch happens when there are references from a
  * code or data section to an init section (both code or data).
  * The init sections are (for most archs) discarded by the kernel
  * when early init has completed so all such references are potential bugs.
  * For exit sections the same issue exists.
+ *
  * The following markers are used for the cases where the reference to
  * the *init / *exit section (code or data) is valid and will teach
- * modpost not to issue a warning.
- * The markers follow same syntax rules as __init / __initdata. */
+ * modpost not to issue a warning.  Intended semantics is that a code or
+ * data tagged __ref* can reference code or data from init section without
+ * producing a warning (of course, no warning does not mean code is
+ * correct, so optimally document why the __ref is needed and why it's OK).
+ *
+ * The markers follow same syntax rules as __init / __initdata.
+ */
 #define __ref            __section(.ref.text) noinline
 #define __refdata        __section(.ref.data)
 #define __refconst       __section(.ref.rodata)
diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h
index c117a68d04a..5e86dc771da 100644
--- a/include/linux/usb/cdc.h
+++ b/include/linux/usb/cdc.h
@@ -32,6 +32,8 @@
 
 #define USB_CDC_PROTO_EEM			7
 
+#define USB_CDC_NCM_PROTO_NTB			1
+
 /*-------------------------------------------------------------------------*/
 
 /*
@@ -274,13 +276,13 @@ struct usb_cdc_notification {
 /*
  * Class Specific structures and constants
  *
- * CDC NCM parameter structure, CDC NCM subclass 6.2.1
+ * CDC NCM NTB parameters structure, CDC NCM subclass 6.2.1
  *
  */
 
-struct usb_cdc_ncm_ntb_parameter {
+struct usb_cdc_ncm_ntb_parameters {
 	__le16	wLength;
-	__le16	bmNtbFormatSupported;
+	__le16	bmNtbFormatsSupported;
 	__le32	dwNtbInMaxSize;
 	__le16	wNdpInDivisor;
 	__le16	wNdpInPayloadRemainder;
@@ -297,8 +299,8 @@ struct usb_cdc_ncm_ntb_parameter {
  * CDC NCM transfer headers, CDC NCM subclass 3.2
  */
 
-#define NCM_NTH16_SIGN		0x484D434E /* NCMH */
-#define NCM_NTH32_SIGN		0x686D636E /* ncmh */
+#define USB_CDC_NCM_NTH16_SIGN		0x484D434E /* NCMH */
+#define USB_CDC_NCM_NTH32_SIGN		0x686D636E /* ncmh */
 
 struct usb_cdc_ncm_nth16 {
 	__le32	dwSignature;
@@ -320,25 +322,78 @@ struct usb_cdc_ncm_nth32 {
  * CDC NCM datagram pointers, CDC NCM subclass 3.3
  */
 
-#define NCM_NDP16_CRC_SIGN	0x314D434E /* NCM1 */
-#define NCM_NDP16_NOCRC_SIGN	0x304D434E /* NCM0 */
-#define NCM_NDP32_CRC_SIGN	0x316D636E /* ncm1 */
-#define NCM_NDP32_NOCRC_SIGN	0x306D636E /* ncm0 */
+#define USB_CDC_NCM_NDP16_CRC_SIGN	0x314D434E /* NCM1 */
+#define USB_CDC_NCM_NDP16_NOCRC_SIGN	0x304D434E /* NCM0 */
+#define USB_CDC_NCM_NDP32_CRC_SIGN	0x316D636E /* ncm1 */
+#define USB_CDC_NCM_NDP32_NOCRC_SIGN	0x306D636E /* ncm0 */
+
+/* 16-bit NCM Datagram Pointer Entry */
+struct usb_cdc_ncm_dpe16 {
+	__le16	wDatagramIndex;
+	__le16	wDatagramLength;
+} __attribute__((__packed__));
 
+/* 16-bit NCM Datagram Pointer Table */
 struct usb_cdc_ncm_ndp16 {
 	__le32	dwSignature;
 	__le16	wLength;
 	__le16	wNextFpIndex;
-	__u8	data[0];
+	struct	usb_cdc_ncm_dpe16 dpe16[0];
 } __attribute__ ((packed));
 
+/* 32-bit NCM Datagram Pointer Entry */
+struct usb_cdc_ncm_dpe32 {
+	__le32	dwDatagramIndex;
+	__le32	dwDatagramLength;
+} __attribute__((__packed__));
+
+/* 32-bit NCM Datagram Pointer Table */
 struct usb_cdc_ncm_ndp32 {
 	__le32	dwSignature;
 	__le16	wLength;
 	__le16	wReserved6;
-	__le32	dwNextFpIndex;
+	__le32	dwNextNdpIndex;
 	__le32	dwReserved12;
-	__u8	data[0];
+	struct	usb_cdc_ncm_dpe32 dpe32[0];
 } __attribute__ ((packed));
 
+/* CDC NCM subclass 3.2.1 and 3.2.2 */
+#define USB_CDC_NCM_NDP16_INDEX_MIN			0x000C
+#define USB_CDC_NCM_NDP32_INDEX_MIN			0x0010
+
+/* CDC NCM subclass 3.3.3 Datagram Formatting */
+#define USB_CDC_NCM_DATAGRAM_FORMAT_CRC			0x30
+#define USB_CDC_NCM_DATAGRAM_FORMAT_NOCRC		0X31
+
+/* CDC NCM subclass 4.2 NCM Communications Interface Protocol Code */
+#define USB_CDC_NCM_PROTO_CODE_NO_ENCAP_COMMANDS	0x00
+#define USB_CDC_NCM_PROTO_CODE_EXTERN_PROTO		0xFE
+
+/* CDC NCM subclass 5.2.1 NCM Functional Descriptor, bmNetworkCapabilities */
+#define USB_CDC_NCM_NCAP_ETH_FILTER			(1 << 0)
+#define USB_CDC_NCM_NCAP_NET_ADDRESS			(1 << 1)
+#define USB_CDC_NCM_NCAP_ENCAP_COMMAND			(1 << 2)
+#define USB_CDC_NCM_NCAP_MAX_DATAGRAM_SIZE		(1 << 3)
+#define USB_CDC_NCM_NCAP_CRC_MODE			(1 << 4)
+
+/* CDC NCM subclass Table 6-3: NTB Parameter Structure */
+#define USB_CDC_NCM_NTB16_SUPPORTED			(1 << 0)
+#define USB_CDC_NCM_NTB32_SUPPORTED			(1 << 1)
+
+/* CDC NCM subclass Table 6-3: NTB Parameter Structure */
+#define USB_CDC_NCM_NDP_ALIGN_MIN_SIZE			0x04
+#define USB_CDC_NCM_NTB_MAX_LENGTH			0x1C
+
+/* CDC NCM subclass 6.2.5 SetNtbFormat */
+#define USB_CDC_NCM_NTB16_FORMAT			0x00
+#define USB_CDC_NCM_NTB32_FORMAT			0x01
+
+/* CDC NCM subclass 6.2.7 SetNtbInputSize */
+#define USB_CDC_NCM_NTB_MIN_IN_SIZE			2048
+#define USB_CDC_NCM_NTB_MIN_OUT_SIZE			2048
+
+/* CDC NCM subclass 6.2.11 SetCrcMode */
+#define USB_CDC_NCM_CRC_NOT_APPENDED			0x00
+#define USB_CDC_NCM_CRC_APPENDED			0x01
+
 #endif /* __LINUX_USB_CDC_H */
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index da2ed77d3e8..f917bbbc890 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -123,8 +123,23 @@
 #define USB_DEVICE_A_ALT_HNP_SUPPORT	5	/* (otg) other RH port does */
 #define USB_DEVICE_DEBUG_MODE		6	/* (special devices only) */
 
+/*
+ * New Feature Selectors as added by USB 3.0
+ * See USB 3.0 spec Table 9-6
+ */
+#define USB_DEVICE_U1_ENABLE	48	/* dev may initiate U1 transition */
+#define USB_DEVICE_U2_ENABLE	49	/* dev may initiate U2 transition */
+#define USB_DEVICE_LTM_ENABLE	50	/* dev may send LTM */
+#define USB_INTRF_FUNC_SUSPEND	0	/* function suspend */
+
+#define USB_INTR_FUNC_SUSPEND_OPT_MASK	0xFF00
+
 #define USB_ENDPOINT_HALT		0	/* IN/OUT will STALL */
 
+/* Bit array elements as returned by the USB_REQ_GET_STATUS request. */
+#define USB_DEV_STAT_U1_ENABLED		2	/* transition into U1 state */
+#define USB_DEV_STAT_U2_ENABLED		3	/* transition into U2 state */
+#define USB_DEV_STAT_LTM_ENABLED	4	/* Latency tolerance messages */
 
 /**
  * struct usb_ctrlrequest - SETUP data for a USB device control request
@@ -675,6 +690,7 @@ struct usb_bos_descriptor {
 	__u8  bNumDeviceCaps;
 } __attribute__((packed));
 
+#define USB_DT_BOS_SIZE		5
 /*-------------------------------------------------------------------------*/
 
 /* USB_DT_DEVICE_CAPABILITY:  grouped with BOS */
@@ -712,16 +728,56 @@ struct usb_wireless_cap_descriptor {	/* Ultra Wide Band */
 	__u8  bReserved;
 } __attribute__((packed));
 
+/* USB 2.0 Extension descriptor */
 #define	USB_CAP_TYPE_EXT		2
 
 struct usb_ext_cap_descriptor {		/* Link Power Management */
 	__u8  bLength;
 	__u8  bDescriptorType;
 	__u8  bDevCapabilityType;
-	__u8  bmAttributes;
+	__le32 bmAttributes;
 #define USB_LPM_SUPPORT			(1 << 1)	/* supports LPM */
 } __attribute__((packed));
 
+#define USB_DT_USB_EXT_CAP_SIZE	7
+
+/*
+ * SuperSpeed USB Capability descriptor: Defines the set of SuperSpeed USB
+ * specific device level capabilities
+ */
+#define		USB_SS_CAP_TYPE		3
+struct usb_ss_cap_descriptor {		/* Link Power Management */
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDevCapabilityType;
+	__u8  bmAttributes;
+#define USB_LTM_SUPPORT			(1 << 1) /* supports LTM */
+	__le16 wSpeedSupported;
+#define USB_LOW_SPEED_OPERATION		(1)	 /* Low speed operation */
+#define USB_FULL_SPEED_OPERATION	(1 << 1) /* Full speed operation */
+#define USB_HIGH_SPEED_OPERATION	(1 << 2) /* High speed operation */
+#define USB_5GBPS_OPERATION		(1 << 3) /* Operation at 5Gbps */
+	__u8  bFunctionalitySupport;
+	__u8  bU1devExitLat;
+	__le16 bU2DevExitLat;
+} __attribute__((packed));
+
+#define USB_DT_USB_SS_CAP_SIZE	10
+
+/*
+ * Container ID Capability descriptor: Defines the instance unique ID used to
+ * identify the instance across all operating modes
+ */
+#define	CONTAINER_ID_TYPE	4
+struct usb_ss_container_id_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDevCapabilityType;
+	__u8  bReserved;
+	__u8  ContainerID[16]; /* 128-bit number */
+} __attribute__((packed));
+
+#define USB_DT_USB_SS_CONTN_ID_SIZE	20
 /*-------------------------------------------------------------------------*/
 
 /* USB_DT_WIRELESS_ENDPOINT_COMP:  companion descriptor associated with
@@ -808,4 +864,14 @@ enum usb_device_state {
 	 */
 };
 
+/*-------------------------------------------------------------------------*/
+
+/*
+ * As per USB compliance update, a device that is actively drawing
+ * more than 100mA from USB must report itself as bus-powered in
+ * the GetStatus(DEVICE) call.
+ * http://compliance.usb.org/index.asp?UpdateFile=Electrical&Format=Standard#34
+ */
+#define USB_SELF_POWER_VBUS_MAX_DRAW		100
+
 #endif /* __LINUX_USB_CH9_H */
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index 617068134ae..3d29a7dcac2 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -161,8 +161,6 @@ ep_choose(struct usb_gadget *g, struct usb_endpoint_descriptor *hs,
  *	and by language IDs provided in control requests.
  * @descriptors: Table of descriptors preceding all function descriptors.
  *	Examples include OTG and vendor-specific descriptors.
- * @bind: Called from @usb_add_config() to allocate resources unique to this
- *	configuration and to call @usb_add_function() for each function used.
  * @unbind: Reverses @bind; called as a side effect of unregistering the
  *	driver which added this configuration.
  * @setup: Used to delegate control requests that aren't handled by standard
@@ -207,8 +205,7 @@ struct usb_configuration {
 	 * we can't restructure things to avoid mismatching...
 	 */
 
-	/* configuration management:  bind/unbind */
-	int			(*bind)(struct usb_configuration *);
+	/* configuration management: unbind/setup */
 	void			(*unbind)(struct usb_configuration *);
 	int			(*setup)(struct usb_configuration *,
 					const struct usb_ctrlrequest *);
@@ -232,20 +229,24 @@ struct usb_configuration {
 };
 
 int usb_add_config(struct usb_composite_dev *,
-		struct usb_configuration *);
+		struct usb_configuration *,
+		int (*)(struct usb_configuration *));
 
 /**
  * struct usb_composite_driver - groups configurations into a gadget
  * @name: For diagnostics, identifies the driver.
+ * @iProduct: Used as iProduct override if @dev->iProduct is not set.
+ *	If NULL value of @name is taken.
+ * @iManufacturer: Used as iManufacturer override if @dev->iManufacturer is
+ *	not set. If NULL a default "<system> <release> with <udc>" value
+ *	will be used.
  * @dev: Template descriptor for the device, including default device
  *	identifiers.
  * @strings: tables of strings, keyed by identifiers assigned during bind()
  *	and language IDs provided in control requests
- * @bind: (REQUIRED) Used to allocate resources that are shared across the
- *	whole device, such as string IDs, and add its configurations using
- *	@usb_add_config().  This may fail by returning a negative errno
- *	value; it should return zero on successful initialization.
- * @unbind: Reverses @bind(); called as a side effect of unregistering
+ * @needs_serial: set to 1 if the gadget needs userspace to provide
+ * 	a serial number.  If one is not provided, warning will be printed.
+ * @unbind: Reverses bind; called as a side effect of unregistering
  *	this driver.
  * @disconnect: optional driver disconnect method
  * @suspend: Notifies when the host stops sending USB traffic,
@@ -256,7 +257,7 @@ int usb_add_config(struct usb_composite_dev *,
  * Devices default to reporting self powered operation.  Devices which rely
  * on bus powered operation should report this in their @bind() method.
  *
- * Before returning from @bind, various fields in the template descriptor
+ * Before returning from bind, various fields in the template descriptor
  * may be overridden.  These include the idVendor/idProduct/bcdDevice values
  * normally to bind the appropriate host side driver, and the three strings
  * (iManufacturer, iProduct, iSerialNumber) normally used to provide user
@@ -266,15 +267,12 @@ int usb_add_config(struct usb_composite_dev *,
  */
 struct usb_composite_driver {
 	const char				*name;
+	const char				*iProduct;
+	const char				*iManufacturer;
 	const struct usb_device_descriptor	*dev;
 	struct usb_gadget_strings		**strings;
+	unsigned		needs_serial:1;
 
-	/* REVISIT:  bind() functions can be marked __init, which
-	 * makes trouble for section mismatch analysis.  See if
-	 * we can't restructure things to avoid mismatching...
-	 */
-
-	int			(*bind)(struct usb_composite_dev *);
 	int			(*unbind)(struct usb_composite_dev *);
 
 	void			(*disconnect)(struct usb_composite_dev *);
@@ -284,8 +282,9 @@ struct usb_composite_driver {
 	void			(*resume)(struct usb_composite_dev *);
 };
 
-extern int usb_composite_register(struct usb_composite_driver *);
-extern void usb_composite_unregister(struct usb_composite_driver *);
+extern int usb_composite_probe(struct usb_composite_driver *driver,
+			       int (*bind)(struct usb_composite_dev *cdev));
+extern void usb_composite_unregister(struct usb_composite_driver *driver);
 
 
 /**
@@ -334,6 +333,9 @@ struct usb_composite_dev {
 	struct list_head		configs;
 	struct usb_composite_driver	*driver;
 	u8				next_string_id;
+	u8				manufacturer_override;
+	u8				product_override;
+	u8				serial_override;
 
 	/* the gadget driver won't enable the data pullup
 	 * while the deactivation count is nonzero.
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index d3ef42d7d2f..006412ce230 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -705,11 +705,6 @@ static inline int usb_gadget_disconnect(struct usb_gadget *gadget)
  * struct usb_gadget_driver - driver for usb 'slave' devices
  * @function: String describing the gadget's function
  * @speed: Highest speed the driver handles.
- * @bind: Invoked when the driver is bound to a gadget, usually
- *	after registering the driver.
- *	At that point, ep0 is fully initialized, and ep_list holds
- *	the currently-available endpoints.
- *	Called in a context that permits sleeping.
  * @setup: Invoked for ep0 control requests that aren't handled by
  *	the hardware level driver. Most calls must be handled by
  *	the gadget driver, including descriptor and configuration
@@ -774,7 +769,6 @@ static inline int usb_gadget_disconnect(struct usb_gadget *gadget)
 struct usb_gadget_driver {
 	char			*function;
 	enum usb_device_speed	speed;
-	int			(*bind)(struct usb_gadget *);
 	void			(*unbind)(struct usb_gadget *);
 	int			(*setup)(struct usb_gadget *,
 					const struct usb_ctrlrequest *);
@@ -798,17 +792,19 @@ struct usb_gadget_driver {
  */
 
 /**
- * usb_gadget_register_driver - register a gadget driver
- * @driver:the driver being registered
+ * usb_gadget_probe_driver - probe a gadget driver
+ * @driver: the driver being registered
+ * @bind: the driver's bind callback
  * Context: can sleep
  *
  * Call this in your gadget driver's module initialization function,
  * to tell the underlying usb controller driver about your driver.
- * The driver's bind() function will be called to bind it to a
- * gadget before this registration call returns.  It's expected that
- * the bind() functions will be in init sections.
+ * The @bind() function will be called to bind it to a gadget before this
+ * registration call returns.  It's expected that the @bind() function will
+ * be in init sections.
  */
-int usb_gadget_register_driver(struct usb_gadget_driver *driver);
+int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+		int (*bind)(struct usb_gadget *));
 
 /**
  * usb_gadget_unregister_driver - unregister a gadget driver
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 3b571f1ffbb..0b6e751ea0b 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -329,6 +329,8 @@ extern int usb_hcd_submit_urb(struct urb *urb, gfp_t mem_flags);
 extern int usb_hcd_unlink_urb(struct urb *urb, int status);
 extern void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb,
 		int status);
+extern void unmap_urb_setup_for_dma(struct usb_hcd *, struct urb *);
+extern void unmap_urb_for_dma(struct usb_hcd *, struct urb *);
 extern void usb_hcd_flush_endpoint(struct usb_device *udev,
 		struct usb_host_endpoint *ep);
 extern void usb_hcd_disable_endpoint(struct usb_device *udev,
diff --git a/include/linux/usb/intel_mid_otg.h b/include/linux/usb/intel_mid_otg.h
new file mode 100644
index 00000000000..a0ccf795f36
--- /dev/null
+++ b/include/linux/usb/intel_mid_otg.h
@@ -0,0 +1,180 @@
+/*
+ * Intel MID (Langwell/Penwell) USB OTG Transceiver driver
+ * Copyright (C) 2008 - 2010, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef __INTEL_MID_OTG_H
+#define __INTEL_MID_OTG_H
+
+#include <linux/pm.h>
+#include <linux/usb/otg.h>
+#include <linux/notifier.h>
+
+struct intel_mid_otg_xceiv;
+
+/* This is a common data structure for Intel MID platform to
+ * save values of the OTG state machine */
+struct otg_hsm {
+	/* Input */
+	int a_bus_resume;
+	int a_bus_suspend;
+	int a_conn;
+	int a_sess_vld;
+	int a_srp_det;
+	int a_vbus_vld;
+	int b_bus_resume;
+	int b_bus_suspend;
+	int b_conn;
+	int b_se0_srp;
+	int b_ssend_srp;
+	int b_sess_end;
+	int b_sess_vld;
+	int id;
+/* id values */
+#define ID_B		0x05
+#define ID_A		0x04
+#define ID_ACA_C	0x03
+#define ID_ACA_B	0x02
+#define ID_ACA_A	0x01
+	int power_up;
+	int adp_change;
+	int test_device;
+
+	/* Internal variables */
+	int a_set_b_hnp_en;
+	int b_srp_done;
+	int b_hnp_enable;
+	int hnp_poll_enable;
+
+	/* Timeout indicator for timers */
+	int a_wait_vrise_tmout;
+	int a_wait_bcon_tmout;
+	int a_aidl_bdis_tmout;
+	int a_bidl_adis_tmout;
+	int a_bidl_adis_tmr;
+	int a_wait_vfall_tmout;
+	int b_ase0_brst_tmout;
+	int b_bus_suspend_tmout;
+	int b_srp_init_tmout;
+	int b_srp_fail_tmout;
+	int b_srp_fail_tmr;
+	int b_adp_sense_tmout;
+
+	/* Informative variables */
+	int a_bus_drop;
+	int a_bus_req;
+	int a_clr_err;
+	int b_bus_req;
+	int a_suspend_req;
+	int b_bus_suspend_vld;
+
+	/* Output */
+	int drv_vbus;
+	int loc_conn;
+	int loc_sof;
+
+	/* Others */
+	int vbus_srp_up;
+};
+
+/* must provide ULPI access function to read/write registers implemented in
+ * ULPI address space */
+struct iotg_ulpi_access_ops {
+	int	(*read)(struct intel_mid_otg_xceiv *iotg, u8 reg, u8 *val);
+	int	(*write)(struct intel_mid_otg_xceiv *iotg, u8 reg, u8 val);
+};
+
+#define OTG_A_DEVICE	0x0
+#define OTG_B_DEVICE	0x1
+
+/*
+ * the Intel MID (Langwell/Penwell) otg transceiver driver needs to interact
+ * with device and host drivers to implement the USB OTG related feature. More
+ * function members are added based on otg_transceiver data structure for this
+ * purpose.
+ */
+struct intel_mid_otg_xceiv {
+	struct otg_transceiver	otg;
+	struct otg_hsm		hsm;
+
+	/* base address */
+	void __iomem		*base;
+
+	/* ops to access ulpi */
+	struct iotg_ulpi_access_ops	ulpi_ops;
+
+	/* atomic notifier for interrupt context */
+	struct atomic_notifier_head	iotg_notifier;
+
+	/* start/stop USB Host function */
+	int	(*start_host)(struct intel_mid_otg_xceiv *iotg);
+	int	(*stop_host)(struct intel_mid_otg_xceiv *iotg);
+
+	/* start/stop USB Peripheral function */
+	int	(*start_peripheral)(struct intel_mid_otg_xceiv *iotg);
+	int	(*stop_peripheral)(struct intel_mid_otg_xceiv *iotg);
+
+	/* start/stop ADP sense/probe function */
+	int	(*set_adp_probe)(struct intel_mid_otg_xceiv *iotg,
+					bool enabled, int dev);
+	int	(*set_adp_sense)(struct intel_mid_otg_xceiv *iotg,
+					bool enabled);
+
+#ifdef CONFIG_PM
+	/* suspend/resume USB host function */
+	int	(*suspend_host)(struct intel_mid_otg_xceiv *iotg,
+					pm_message_t message);
+	int	(*resume_host)(struct intel_mid_otg_xceiv *iotg);
+
+	int	(*suspend_peripheral)(struct intel_mid_otg_xceiv *iotg,
+					pm_message_t message);
+	int	(*resume_peripheral)(struct intel_mid_otg_xceiv *iotg);
+#endif
+
+};
+static inline
+struct intel_mid_otg_xceiv *otg_to_mid_xceiv(struct otg_transceiver *otg)
+{
+	return container_of(otg, struct intel_mid_otg_xceiv, otg);
+}
+
+#define MID_OTG_NOTIFY_CONNECT		0x0001
+#define MID_OTG_NOTIFY_DISCONN		0x0002
+#define MID_OTG_NOTIFY_HSUSPEND		0x0003
+#define MID_OTG_NOTIFY_HRESUME		0x0004
+#define MID_OTG_NOTIFY_CSUSPEND		0x0005
+#define MID_OTG_NOTIFY_CRESUME		0x0006
+#define MID_OTG_NOTIFY_HOSTADD		0x0007
+#define MID_OTG_NOTIFY_HOSTREMOVE	0x0008
+#define MID_OTG_NOTIFY_CLIENTADD	0x0009
+#define MID_OTG_NOTIFY_CLIENTREMOVE	0x000a
+
+static inline int
+intel_mid_otg_register_notifier(struct intel_mid_otg_xceiv *iotg,
+				struct notifier_block *nb)
+{
+	return atomic_notifier_chain_register(&iotg->iotg_notifier, nb);
+}
+
+static inline void
+intel_mid_otg_unregister_notifier(struct intel_mid_otg_xceiv *iotg,
+				struct notifier_block *nb)
+{
+	atomic_notifier_chain_unregister(&iotg->iotg_notifier, nb);
+}
+
+#endif /* __INTEL_MID_OTG_H */
diff --git a/include/linux/usb/langwell_otg.h b/include/linux/usb/langwell_otg.h
new file mode 100644
index 00000000000..51f17b16d31
--- /dev/null
+++ b/include/linux/usb/langwell_otg.h
@@ -0,0 +1,139 @@
+/*
+ * Intel Langwell USB OTG transceiver driver
+ * Copyright (C) 2008 - 2010, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef __LANGWELL_OTG_H
+#define __LANGWELL_OTG_H
+
+#include <linux/usb/intel_mid_otg.h>
+
+#define CI_USBCMD		0x30
+#	define USBCMD_RST		BIT(1)
+#	define USBCMD_RS		BIT(0)
+#define CI_USBSTS		0x34
+#	define USBSTS_SLI		BIT(8)
+#	define USBSTS_URI		BIT(6)
+#	define USBSTS_PCI		BIT(2)
+#define CI_PORTSC1		0x74
+#	define PORTSC_PP		BIT(12)
+#	define PORTSC_LS		(BIT(11) | BIT(10))
+#	define PORTSC_SUSP		BIT(7)
+#	define PORTSC_CCS		BIT(0)
+#define CI_HOSTPC1		0xb4
+#	define HOSTPC1_PHCD		BIT(22)
+#define CI_OTGSC		0xf4
+#	define OTGSC_DPIE		BIT(30)
+#	define OTGSC_1MSE		BIT(29)
+#	define OTGSC_BSEIE		BIT(28)
+#	define OTGSC_BSVIE		BIT(27)
+#	define OTGSC_ASVIE		BIT(26)
+#	define OTGSC_AVVIE		BIT(25)
+#	define OTGSC_IDIE		BIT(24)
+#	define OTGSC_DPIS		BIT(22)
+#	define OTGSC_1MSS		BIT(21)
+#	define OTGSC_BSEIS		BIT(20)
+#	define OTGSC_BSVIS		BIT(19)
+#	define OTGSC_ASVIS		BIT(18)
+#	define OTGSC_AVVIS		BIT(17)
+#	define OTGSC_IDIS		BIT(16)
+#	define OTGSC_DPS		BIT(14)
+#	define OTGSC_1MST		BIT(13)
+#	define OTGSC_BSE		BIT(12)
+#	define OTGSC_BSV		BIT(11)
+#	define OTGSC_ASV		BIT(10)
+#	define OTGSC_AVV		BIT(9)
+#	define OTGSC_ID			BIT(8)
+#	define OTGSC_HABA		BIT(7)
+#	define OTGSC_HADP		BIT(6)
+#	define OTGSC_IDPU		BIT(5)
+#	define OTGSC_DP			BIT(4)
+#	define OTGSC_OT			BIT(3)
+#	define OTGSC_HAAR		BIT(2)
+#	define OTGSC_VC			BIT(1)
+#	define OTGSC_VD			BIT(0)
+#	define OTGSC_INTEN_MASK		(0x7f << 24)
+#	define OTGSC_INT_MASK		(0x5f << 24)
+#	define OTGSC_INTSTS_MASK	(0x7f << 16)
+#define CI_USBMODE		0xf8
+#	define USBMODE_CM		(BIT(1) | BIT(0))
+#	define USBMODE_IDLE		0
+#	define USBMODE_DEVICE		0x2
+#	define USBMODE_HOST		0x3
+#define USBCFG_ADDR			0xff10801c
+#define USBCFG_LEN			4
+#	define USBCFG_VBUSVAL		BIT(14)
+#	define USBCFG_AVALID		BIT(13)
+#	define USBCFG_BVALID		BIT(12)
+#	define USBCFG_SESEND		BIT(11)
+
+#define INTR_DUMMY_MASK (USBSTS_SLI | USBSTS_URI | USBSTS_PCI)
+
+enum langwell_otg_timer_type {
+	TA_WAIT_VRISE_TMR,
+	TA_WAIT_BCON_TMR,
+	TA_AIDL_BDIS_TMR,
+	TB_ASE0_BRST_TMR,
+	TB_SE0_SRP_TMR,
+	TB_SRP_INIT_TMR,
+	TB_SRP_FAIL_TMR,
+	TB_BUS_SUSPEND_TMR
+};
+
+#define TA_WAIT_VRISE	100
+#define TA_WAIT_BCON	30000
+#define TA_AIDL_BDIS	15000
+#define TB_ASE0_BRST	5000
+#define TB_SE0_SRP	2
+#define TB_SRP_INIT	100
+#define TB_SRP_FAIL	5500
+#define TB_BUS_SUSPEND	500
+
+struct langwell_otg_timer {
+	unsigned long expires;	/* Number of count increase to timeout */
+	unsigned long count;	/* Tick counter */
+	void (*function)(unsigned long);	/* Timeout function */
+	unsigned long data;	/* Data passed to function */
+	struct list_head list;
+};
+
+struct langwell_otg {
+	struct intel_mid_otg_xceiv	iotg;
+	struct device			*dev;
+
+	void __iomem			*usbcfg;	/* SCCBUSB config Reg */
+
+	unsigned			region;
+	unsigned			cfg_region;
+
+	struct work_struct		work;
+	struct workqueue_struct		*qwork;
+	struct timer_list		hsm_timer;
+
+	spinlock_t			lock;
+	spinlock_t			wq_lock;
+
+	struct notifier_block		iotg_notifier;
+};
+
+static inline
+struct langwell_otg *mid_xceiv_to_lnw(struct intel_mid_otg_xceiv *iotg)
+{
+	return container_of(iotg, struct langwell_otg, iotg);
+}
+
+#endif /* __LANGWELL_OTG_H__ */
diff --git a/include/linux/usb/ncm.h b/include/linux/usb/ncm.h
deleted file mode 100644
index 006d1064c8b..00000000000
--- a/include/linux/usb/ncm.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * USB CDC NCM auxiliary definitions
- */
-
-#ifndef __LINUX_USB_NCM_H
-#define __LINUX_USB_NCM_H
-
-#include <linux/types.h>
-#include <linux/usb/cdc.h>
-#include <asm/unaligned.h>
-
-#define NCM_NTB_MIN_IN_SIZE		2048
-#define NCM_NTB_MIN_OUT_SIZE		2048
-
-#define NCM_CONTROL_TIMEOUT		(5 * 1000)
-
-/* bmNetworkCapabilities */
-
-#define NCM_NCAP_ETH_FILTER	(1 << 0)
-#define NCM_NCAP_NET_ADDRESS	(1 << 1)
-#define NCM_NCAP_ENCAP_COMM	(1 << 2)
-#define NCM_NCAP_MAX_DGRAM	(1 << 3)
-#define NCM_NCAP_CRC_MODE	(1 << 4)
-
-/*
- * Here are options for NCM Datagram Pointer table (NDP) parser.
- * There are 2 different formats: NDP16 and NDP32 in the spec (ch. 3),
- * in NDP16 offsets and sizes fields are 1 16bit word wide,
- * in NDP32 -- 2 16bit words wide. Also signatures are different.
- * To make the parser code the same, put the differences in the structure,
- * and switch pointers to the structures when the format is changed.
- */
-
-struct ndp_parser_opts {
-	u32		nth_sign;
-	u32		ndp_sign;
-	unsigned	nth_size;
-	unsigned	ndp_size;
-	unsigned	ndplen_align;
-	/* sizes in u16 units */
-	unsigned	dgram_item_len; /* index or length */
-	unsigned	block_length;
-	unsigned	fp_index;
-	unsigned	reserved1;
-	unsigned	reserved2;
-	unsigned	next_fp_index;
-};
-
-#define INIT_NDP16_OPTS {					\
-		.nth_sign = NCM_NTH16_SIGN,			\
-		.ndp_sign = NCM_NDP16_NOCRC_SIGN,		\
-		.nth_size = sizeof(struct usb_cdc_ncm_nth16),	\
-		.ndp_size = sizeof(struct usb_cdc_ncm_ndp16),	\
-		.ndplen_align = 4,				\
-		.dgram_item_len = 1,				\
-		.block_length = 1,				\
-		.fp_index = 1,					\
-		.reserved1 = 0,					\
-		.reserved2 = 0,					\
-		.next_fp_index = 1,				\
-	}
-
-
-#define INIT_NDP32_OPTS {					\
-		.nth_sign = NCM_NTH32_SIGN,			\
-		.ndp_sign = NCM_NDP32_NOCRC_SIGN,		\
-		.nth_size = sizeof(struct usb_cdc_ncm_nth32),	\
-		.ndp_size = sizeof(struct usb_cdc_ncm_ndp32),	\
-		.ndplen_align = 8,				\
-		.dgram_item_len = 2,				\
-		.block_length = 2,				\
-		.fp_index = 2,					\
-		.reserved1 = 1,					\
-		.reserved2 = 2,					\
-		.next_fp_index = 2,				\
-	}
-
-static inline void put_ncm(__le16 **p, unsigned size, unsigned val)
-{
-	switch (size) {
-	case 1:
-		put_unaligned_le16((u16)val, *p);
-		break;
-	case 2:
-		put_unaligned_le32((u32)val, *p);
-
-		break;
-	default:
-		BUG();
-	}
-
-	*p += size;
-}
-
-static inline unsigned get_ncm(__le16 **p, unsigned size)
-{
-	unsigned tmp;
-
-	switch (size) {
-	case 1:
-		tmp = get_unaligned_le16(*p);
-		break;
-	case 2:
-		tmp = get_unaligned_le32(*p);
-		break;
-	default:
-		BUG();
-	}
-
-	*p += size;
-	return tmp;
-}
-
-#endif /* __LINUX_USB_NCM_H */
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index 545cba73cca..0a5b3711e50 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -164,8 +164,19 @@ otg_shutdown(struct otg_transceiver *otg)
 }
 
 /* for usb host and peripheral controller drivers */
+#ifdef CONFIG_USB_OTG_UTILS
 extern struct otg_transceiver *otg_get_transceiver(void);
 extern void otg_put_transceiver(struct otg_transceiver *);
+#else
+static inline struct otg_transceiver *otg_get_transceiver(void)
+{
+	return NULL;
+}
+
+static inline void otg_put_transceiver(struct otg_transceiver *x)
+{
+}
+#endif
 
 /* Context: can sleep */
 static inline int
diff --git a/include/linux/usb/storage.h b/include/linux/usb/storage.h
new file mode 100644
index 00000000000..d7fc910f1dc
--- /dev/null
+++ b/include/linux/usb/storage.h
@@ -0,0 +1,48 @@
+#ifndef __LINUX_USB_STORAGE_H
+#define __LINUX_USB_STORAGE_H
+
+/*
+ * linux/usb/storage.h
+ *
+ * Copyright Matthew Wilcox for Intel Corp, 2010
+ *
+ * This file contains definitions taken from the
+ * USB Mass Storage Class Specification Overview
+ *
+ * Distributed under the terms of the GNU GPL, version two.
+ */
+
+/* Storage subclass codes */
+
+#define USB_SC_RBC	0x01		/* Typically, flash devices */
+#define USB_SC_8020	0x02		/* CD-ROM */
+#define USB_SC_QIC	0x03		/* QIC-157 Tapes */
+#define USB_SC_UFI	0x04		/* Floppy */
+#define USB_SC_8070	0x05		/* Removable media */
+#define USB_SC_SCSI	0x06		/* Transparent */
+#define USB_SC_LOCKABLE	0x07		/* Password-protected */
+
+#define USB_SC_ISD200	0xf0		/* ISD200 ATA */
+#define USB_SC_CYP_ATACB	0xf1	/* Cypress ATACB */
+#define USB_SC_DEVICE	0xff		/* Use device's value */
+
+/* Storage protocol codes */
+
+#define USB_PR_CBI	0x00		/* Control/Bulk/Interrupt */
+#define USB_PR_CB	0x01		/* Control/Bulk w/o interrupt */
+#define USB_PR_BULK	0x50		/* bulk only */
+#define USB_PR_UAS	0x62		/* USB Attached SCSI */
+
+#define USB_PR_USBAT	0x80		/* SCM-ATAPI bridge */
+#define USB_PR_EUSB_SDDR09	0x81	/* SCM-SCSI bridge for SDDR-09 */
+#define USB_PR_SDDR55	0x82		/* SDDR-55 (made up) */
+#define USB_PR_DPCM_USB	0xf0		/* Combination CB/SDDR09 */
+#define USB_PR_FREECOM	0xf1		/* Freecom */
+#define USB_PR_DATAFAB	0xf2		/* Datafab chipsets */
+#define USB_PR_JUMPSHOT	0xf3		/* Lexar Jumpshot */
+#define USB_PR_ALAUDA	0xf4		/* Alauda chipsets */
+#define USB_PR_KARMA	0xf5		/* Rio Karma */
+
+#define USB_PR_DEVICE	0xff		/* Use device's value */
+
+#endif
diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h
index a4b947e470a..71693d4a4fe 100644
--- a/include/linux/usb_usual.h
+++ b/include/linux/usb_usual.h
@@ -58,7 +58,11 @@
 	US_FLAG(CAPACITY_OK,	0x00010000)			\
 		/* READ CAPACITY response is correct */		\
 	US_FLAG(BAD_SENSE,	0x00020000)			\
-		/* Bad Sense (never more than 18 bytes) */
+		/* Bad Sense (never more than 18 bytes) */	\
+	US_FLAG(NO_READ_DISC_INFO,	0x00040000)		\
+		/* cannot handle READ_DISC_INFO */		\
+	US_FLAG(NO_READ_CAPACITY_16,	0x00080000)		\
+		/* cannot handle READ_CAPACITY_16 */
 
 #define US_FLAG(name, value)	US_FL_##name = value ,
 enum { US_DO_ALL_FLAGS };
@@ -74,42 +78,7 @@ enum { US_DO_ALL_FLAGS };
 #define USB_US_TYPE(flags) 		(((flags) >> 24) & 0xFF)
 #define USB_US_ORIG_FLAGS(flags)	((flags) & 0x00FFFFFF)
 
-/*
- * This is probably not the best place to keep these constants, conceptually.
- * But it's the only header included into all places which need them.
- */
-
-/* Sub Classes */
-
-#define US_SC_RBC	0x01		/* Typically, flash devices */
-#define US_SC_8020	0x02		/* CD-ROM */
-#define US_SC_QIC	0x03		/* QIC-157 Tapes */
-#define US_SC_UFI	0x04		/* Floppy */
-#define US_SC_8070	0x05		/* Removable media */
-#define US_SC_SCSI	0x06		/* Transparent */
-#define US_SC_LOCKABLE	0x07		/* Password-protected */
-
-#define US_SC_ISD200    0xf0		/* ISD200 ATA */
-#define US_SC_CYP_ATACB 0xf1		/* Cypress ATACB */
-#define US_SC_DEVICE	0xff		/* Use device's value */
-
-/* Protocols */
-
-#define US_PR_CBI	0x00		/* Control/Bulk/Interrupt */
-#define US_PR_CB	0x01		/* Control/Bulk w/o interrupt */
-#define US_PR_BULK	0x50		/* bulk only */
-
-#define US_PR_USBAT	0x80		/* SCM-ATAPI bridge */
-#define US_PR_EUSB_SDDR09	0x81	/* SCM-SCSI bridge for SDDR-09 */
-#define US_PR_SDDR55	0x82		/* SDDR-55 (made up) */
-#define US_PR_DPCM_USB  0xf0		/* Combination CB/SDDR09 */
-#define US_PR_FREECOM   0xf1		/* Freecom */
-#define US_PR_DATAFAB   0xf2		/* Datafab chipsets */
-#define US_PR_JUMPSHOT  0xf3		/* Lexar Jumpshot */
-#define US_PR_ALAUDA    0xf4		/* Alauda chipsets */
-#define US_PR_KARMA     0xf5		/* Rio Karma */
-
-#define US_PR_DEVICE	0xff		/* Use device's value */
+#include <linux/usb/storage.h>
 
 /*
  */