[PATCH] msi: refactor and move the msi irq_chip into the arch code

It turns out msi_ops was simply not enough to abstract the architecture
specific details of msi.  So I have moved the resposibility of constructing
the struct irq_chip to the architectures, and have two architecture specific
functions arch_setup_msi_irq, and arch_teardown_msi_irq.

For simple architectures those functions can do all of the work.  For
architectures with platform dependencies they can call into the appropriate
platform code.

With this msi.c is finally free of assuming you have an apic, and this
actually takes less code.

The helpers for the architecture specific code are declared in the linux/msi.h
to keep them separate from the msi functions used by drivers in linux/pci.h

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg KH <greg@kroah.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2 files changed, 49 insertions, 67 deletions

diff --git a/include/linux/msi.h b/include/linux/msi.h
new file mode 100644
index 00000000000..c7ef9434367
--- /dev/null
+++ b/include/linux/msi.h
@@ -0,0 +1,49 @@
+#ifndef LINUX_MSI_H
+#define LINUX_MSI_H
+
+struct msi_msg {
+	u32	address_lo;	/* low 32 bits of msi message address */
+	u32	address_hi;	/* high 32 bits of msi message address */
+	u32	data;		/* 16 bits of msi message data */
+};
+
+/* Heper functions */
+extern void mask_msi_irq(unsigned int irq);
+extern void unmask_msi_irq(unsigned int irq);
+extern void read_msi_msg(unsigned int irq, struct msi_msg *msg);
+
+extern void write_msi_msg(unsigned int irq, struct msi_msg *msg);
+
+struct msi_desc {
+	struct {
+		__u8	type	: 5; 	/* {0: unused, 5h:MSI, 11h:MSI-X} */
+		__u8	maskbit	: 1; 	/* mask-pending bit supported ?   */
+		__u8	unused	: 1;
+		__u8	is_64	: 1;	/* Address size: 0=32bit 1=64bit  */
+		__u8	pos;	 	/* Location of the msi capability */
+		__u16	entry_nr;    	/* specific enabled entry 	  */
+		unsigned default_irq;	/* default pre-assigned irq	  */
+	}msi_attrib;
+
+	struct {
+		__u16	head;
+		__u16	tail;
+	}link;
+
+	void __iomem *mask_base;
+	struct pci_dev *dev;
+
+#ifdef CONFIG_PM
+	/* PM save area for MSIX address/data */
+	struct msi_msg msg_save;
+#endif
+};
+
+/*
+ * The arch hook for setup up msi irqs
+ */
+int arch_setup_msi_irq(unsigned int irq, struct pci_dev *dev);
+void arch_teardown_msi_irq(unsigned int irq);
+
+
+#endif /* LINUX_MSI_H */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 9b34bc8f34e..0da5a4a8940 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -595,11 +595,6 @@ struct msix_entry {
 	u16	entry;	/* driver uses to specify entry, OS writes */
 };
 
-struct msi_msg {
-	u32	address_lo;	/* low 32 bits of msi message address */
-	u32	address_hi;	/* high 32 bits of msi message address */
-	u32	data;		/* 16 bits of msi message data */
-};
 
 #ifndef CONFIG_PCI_MSI
 static inline void pci_scan_msi_device(struct pci_dev *dev) {}
@@ -617,68 +612,6 @@ extern int pci_enable_msix(struct pci_dev* dev,
 	struct msix_entry *entries, int nvec);
 extern void pci_disable_msix(struct pci_dev *dev);
 extern void msi_remove_pci_irq_vectors(struct pci_dev *dev);
-
-/*
- * MSI operation vector.  Used by the msi core code (drivers/pci/msi.c)
- * to abstract platform-specific tasks relating to MSI address generation
- * and resource management.
- */
-struct msi_ops {
-	int needs_64bit_address;
-	/**
-	 * setup - generate an MSI bus address and data for a given vector
-	 * @pdev: PCI device context (in)
-	 * @irq: irq allocated by the msi core (in)
-	 * @msg: PCI bus address and data for msi message (out)
-	 *
-	 * Description: The setup op is used to generate a PCI bus addres and
-	 * data which the msi core will program into the card MSI capability
-	 * registers.  The setup routine is responsible for picking an initial
-	 * cpu to target the MSI at.  The setup routine is responsible for
-	 * examining pdev to determine the MSI capabilities of the card and
-	 * generating a suitable address/data.  The setup routine is
-	 * responsible for allocating and tracking any system resources it
-	 * needs to route the MSI to the cpu it picks, and for associating
-	 * those resources with the passed in vector.
-	 *
-	 * Returns 0 if the MSI address/data was successfully setup.
-	 **/
-
-	int	(*setup)    (struct pci_dev *pdev, unsigned int irq,
-			     struct msi_msg *msg);
-
-	/**
-	 * teardown - release resources allocated by setup
-	 * @vector: vector context for resources (in)
-	 *
-	 * Description:  The teardown op is used to release any resources
-	 * that were allocated in the setup routine associated with the passed
-	 * in vector.
-	 **/
-
-	void	(*teardown) (unsigned int irq);
-
-	/**
-	 * target - retarget an MSI at a different cpu
-	 * @vector: vector context for resources (in)
-	 * @cpu:  new cpu to direct vector at (in)
-	 * @addr_hi: new value of PCI bus upper 32 bits (in/out)
-	 * @addr_lo: new value of PCI bus lower 32 bits (in/out)
-	 *
-	 * Description:  The target op is used to redirect an MSI vector
-	 * at a different cpu.  addr_hi/addr_lo coming in are the existing
-	 * values that the MSI core has programmed into the card.  The
-	 * target code is responsible for freeing any resources (if any)
-	 * associated with the old address, and generating a new PCI bus
-	 * addr_hi/addr_lo that will redirect the vector at the indicated cpu.
-	 **/
-
-	void	(*target)   (unsigned int irq, cpumask_t cpumask,
-			     struct msi_msg *msg);
-};
-
-extern int msi_register(struct msi_ops *ops);
-
 #endif
 
 #ifdef CONFIG_HT_IRQ