Merge tag 'char-misc-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc patches from Greg KH:
 "Here's the big char/misc driver patchset for 3.13-rc1.

  Lots of stuff in here, including some new drivers for Intel's "MIC"
  co-processor devices, and a new eeprom driver.  Other things include
  the driver attribute cleanups, extcon driver updates, hyperv updates,
  and a raft of other miscellaneous driver fixes.

  All of these have been in linux-next for a while"

* tag 'char-misc-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (121 commits)
  misc: mic: Fixes for randconfig build errors and warnings.
  tifm: fix error return code in tifm_7xx1_probe()
  w1-gpio: Use devm_* functions
  w1-gpio: Detect of_gpio_error for first gpio
  uio: Pass pointers to virt_to_page(), not integers
  uio: fix memory leak
  misc/at24: avoid infinite loop on write()
  misc/93xx46: avoid infinite loop on write()
  misc: atmel_pwm: add deferred-probing support
  mei: wd: host_init propagate error codes from called functions
  mei: replace stray pr_debug with dev_dbg
  mei: bus: propagate error code returned by mei_me_cl_by_id
  mei: mei_cl_link remove duplicated check for open_handle_count
  mei: print correct device state during unexpected reset
  mei: nfc: fix memory leak in error path
  lkdtm: add tests for additional page permissions
  lkdtm: adjust recursion size to avoid warnings
  lkdtm: isolate stack corruption test
  mei: move host_clients_map cleanup to device init
  mei: me: downgrade two errors to debug level
  ...

4 files changed, 70 insertions, 101 deletions

diff --git a/include/linux/extcon.h b/include/linux/extcon.h
index fcb51c88319..21c59af1150 100644
--- a/include/linux/extcon.h
+++ b/include/linux/extcon.h
@@ -51,10 +51,10 @@
 enum extcon_cable_name {
 	EXTCON_USB = 0,
 	EXTCON_USB_HOST,
-	EXTCON_TA, /* Travel Adaptor */
+	EXTCON_TA,			/* Travel Adaptor */
 	EXTCON_FAST_CHARGER,
 	EXTCON_SLOW_CHARGER,
-	EXTCON_CHARGE_DOWNSTREAM, /* Charging an external device */
+	EXTCON_CHARGE_DOWNSTREAM,	/* Charging an external device */
 	EXTCON_HDMI,
 	EXTCON_MHL,
 	EXTCON_DVI,
@@ -76,8 +76,8 @@ struct extcon_cable;
 
 /**
  * struct extcon_dev - An extcon device represents one external connector.
- * @name:	The name of this extcon device. Parent device name is used
- *		if NULL.
+ * @name:		The name of this extcon device. Parent device name is
+ *			used if NULL.
  * @supported_cable:	Array of supported cable names ending with NULL.
  *			If supported_cable is NULL, cable name related APIs
  *			are disabled.
@@ -89,21 +89,21 @@ struct extcon_cable;
  *			be attached simulataneously. {0x7, 0} is equivalent to
  *			{0x3, 0x6, 0x5, 0}. If it is {0xFFFFFFFF, 0}, there
  *			can be no simultaneous connections.
- * @print_name:	An optional callback to override the method to print the
- *		name of the extcon device.
+ * @print_name:		An optional callback to override the method to print the
+ *			name of the extcon device.
  * @print_state:	An optional callback to override the method to print the
- *		status of the extcon device.
- * @dev:	Device of this extcon. Do not provide at register-time.
- * @state:	Attach/detach state of this extcon. Do not provide at
- *		register-time
- * @nh:	Notifier for the state change events from this extcon
- * @entry:	To support list of extcon devices so that users can search
- *		for extcon devices based on the extcon name.
+ *			status of the extcon device.
+ * @dev:		Device of this extcon.
+ * @state:		Attach/detach state of this extcon. Do not provide at
+ *			register-time.
+ * @nh:			Notifier for the state change events from this extcon
+ * @entry:		To support list of extcon devices so that users can search
+ *			for extcon devices based on the extcon name.
  * @lock:
  * @max_supported:	Internal value to store the number of cables.
  * @extcon_dev_type:	Device_type struct to provide attribute_groups
  *			customized for each extcon device.
- * @cables:	Sysfs subdirectories. Each represents one cable.
+ * @cables:		Sysfs subdirectories. Each represents one cable.
  *
  * In most cases, users only need to provide "User initializing data" of
  * this struct when registering an extcon. In some exceptional cases,
@@ -111,26 +111,27 @@ struct extcon_cable;
  * are overwritten by register function.
  */
 struct extcon_dev {
-	/* --- Optional user initializing data --- */
-	const char	*name;
+	/* Optional user initializing data */
+	const char *name;
 	const char **supported_cable;
-	const u32	*mutually_exclusive;
+	const u32 *mutually_exclusive;
 
-	/* --- Optional callbacks to override class functions --- */
+	/* Optional callbacks to override class functions */
 	ssize_t	(*print_name)(struct extcon_dev *edev, char *buf);
 	ssize_t	(*print_state)(struct extcon_dev *edev, char *buf);
 
-	/* --- Internal data. Please do not set. --- */
-	struct device	*dev;
-	u32		state;
+	/* Internal data. Please do not set. */
+	struct device dev;
 	struct raw_notifier_head nh;
 	struct list_head entry;
-	spinlock_t lock; /* could be called by irq handler */
 	int max_supported;
+	spinlock_t lock;	/* could be called by irq handler */
+	u32 state;
 
 	/* /sys/class/extcon/.../cable.n/... */
 	struct device_type extcon_dev_type;
 	struct extcon_cable *cables;
+
 	/* /sys/class/extcon/.../mutually_exclusive/... */
 	struct attribute_group attr_g_muex;
 	struct attribute **attrs_muex;
@@ -138,13 +139,13 @@ struct extcon_dev {
 };
 
 /**
- * struct extcon_cable	- An internal data for each cable of extcon device.
- * @edev:	The extcon device
+ * struct extcon_cable - An internal data for each cable of extcon device.
+ * @edev:		The extcon device
  * @cable_index:	Index of this cable in the edev
- * @attr_g:	Attribute group for the cable
- * @attr_name:	"name" sysfs entry
- * @attr_state:	"state" sysfs entry
- * @attrs:	Array pointing to attr_name and attr_state for attr_g
+ * @attr_g:		Attribute group for the cable
+ * @attr_name:		"name" sysfs entry
+ * @attr_state:		"state" sysfs entry
+ * @attrs:		Array pointing to attr_name and attr_state for attr_g
  */
 struct extcon_cable {
 	struct extcon_dev *edev;
@@ -159,11 +160,13 @@ struct extcon_cable {
 
 /**
  * struct extcon_specific_cable_nb - An internal data for
- *				extcon_register_interest().
- * @internal_nb:	a notifier block bridging extcon notifier and cable notifier.
- * @user_nb:	user provided notifier block for events from a specific cable.
+ *				     extcon_register_interest().
+ * @internal_nb:	A notifier block bridging extcon notifier
+ *			and cable notifier.
+ * @user_nb:		user provided notifier block for events from
+ *			a specific cable.
  * @cable_index:	the target cable.
- * @edev:	the target extcon device.
+ * @edev:		the target extcon device.
  * @previous_value:	the saved previous event value.
  */
 struct extcon_specific_cable_nb {
@@ -180,7 +183,7 @@ struct extcon_specific_cable_nb {
  * Following APIs are for notifiers or configurations.
  * Notifiers are the external port and connection devices.
  */
-extern int extcon_dev_register(struct extcon_dev *edev, struct device *dev);
+extern int extcon_dev_register(struct extcon_dev *edev);
 extern void extcon_dev_unregister(struct extcon_dev *edev);
 extern struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name);
 
@@ -238,8 +241,7 @@ extern int extcon_register_notifier(struct extcon_dev *edev,
 extern int extcon_unregister_notifier(struct extcon_dev *edev,
 				      struct notifier_block *nb);
 #else /* CONFIG_EXTCON */
-static inline int extcon_dev_register(struct extcon_dev *edev,
-				      struct device *dev)
+static inline int extcon_dev_register(struct extcon_dev *edev)
 {
 	return 0;
 }
diff --git a/include/linux/extcon/extcon-adc-jack.h b/include/linux/extcon/extcon-adc-jack.h
index 20e9eef25d4..9ca958c4e94 100644
--- a/include/linux/extcon/extcon-adc-jack.h
+++ b/include/linux/extcon/extcon-adc-jack.h
@@ -20,10 +20,10 @@
 
 /**
  * struct adc_jack_cond - condition to use an extcon state
- * @state      - the corresponding extcon state (if 0, this struct denotes
- *             the last adc_jack_cond element among the array)
- * @min_adc    - min adc value for this condition
- * @max_adc    - max adc value for this condition
+ * @state:		the corresponding extcon state (if 0, this struct
+ *			denotes the last adc_jack_cond element among the array)
+ * @min_adc:		min adc value for this condition
+ * @max_adc:		max adc value for this condition
  *
  * For example, if { .state = 0x3, .min_adc = 100, .max_adc = 200}, it means
  * that if ADC value is between (inclusive) 100 and 200, than the cable 0 and
@@ -33,34 +33,34 @@
  * because when no adc_jack_cond is met, state = 0 is automatically chosen.
  */
 struct adc_jack_cond {
-	u32 state; /* extcon state value. 0 if invalid */
+	u32 state;	/* extcon state value. 0 if invalid */
 	u32 min_adc;
 	u32 max_adc;
 };
 
 /**
  * struct adc_jack_pdata - platform data for adc jack device.
- * @name       - name of the extcon device. If null, "adc-jack" is used.
- * @consumer_channel - Unique name to identify the channel on the consumer
- *                   side. This typically describes the channels used within
- *                   the consumer. E.g. 'battery_voltage'
- * @cable_names        - array of cable names ending with null.
- * @adc_contitions     - array of struct adc_jack_cond conditions ending
- *                     with .state = 0 entry. This describes how to decode
- *                     adc values into extcon state.
- * @irq_flags  - irq flags used for the @irq
- * @handling_delay_ms  - in some devices, we need to read ADC value some
- *                     milli-seconds after the interrupt occurs. You may
- *                     describe such delays with @handling_delay_ms, which
- *                     is rounded-off by jiffies.
+ * @name:		name of the extcon device. If null, "adc-jack" is used.
+ * @consumer_channel:	Unique name to identify the channel on the consumer
+ *			side. This typically describes the channels used within
+ *			the consumer. E.g. 'battery_voltage'
+ * @cable_names:	array of cable names ending with null.
+ * @adc_contitions:	array of struct adc_jack_cond conditions ending
+ *			with .state = 0 entry. This describes how to decode
+ *			adc values into extcon state.
+ * @irq_flags:		irq flags used for the @irq
+ * @handling_delay_ms:	in some devices, we need to read ADC value some
+ *			milli-seconds after the interrupt occurs. You may
+ *			describe such delays with @handling_delay_ms, which
+ *			is rounded-off by jiffies.
  */
 struct adc_jack_pdata {
 	const char *name;
 	const char *consumer_channel;
-	/*
-	 * The last entry should be NULL
-	 */
+
+	/* The last entry should be NULL */
 	const char **cable_names;
+
 	/* The last entry's state should be 0 */
 	struct adc_jack_cond *adc_conditions;
 
diff --git a/include/linux/extcon/extcon-gpio.h b/include/linux/extcon/extcon-gpio.h
index 2d8307f7d67..4195810f87f 100644
--- a/include/linux/extcon/extcon-gpio.h
+++ b/include/linux/extcon/extcon-gpio.h
@@ -25,14 +25,17 @@
 
 /**
  * struct gpio_extcon_platform_data - A simple GPIO-controlled extcon device.
- * @name	The name of this GPIO extcon device.
- * @gpio	Corresponding GPIO.
- * @debounce	Debounce time for GPIO IRQ in ms.
- * @irq_flags	IRQ Flags (e.g., IRQF_TRIGGER_LOW).
- * @state_on	print_state is overriden with state_on if attached. If Null,
- *		default method of extcon class is used.
- * @state_off	print_state is overriden with state_on if detached. If Null,
- *		default method of extcon class is used.
+ * @name:		The name of this GPIO extcon device.
+ * @gpio:		Corresponding GPIO.
+ * @gpio_active_low:	Boolean describing whether gpio active state is 1 or 0
+ *			If true, low state of gpio means active.
+ *			If false, high state of gpio means active.
+ * @debounce:		Debounce time for GPIO IRQ in ms.
+ * @irq_flags:		IRQ Flags (e.g., IRQF_TRIGGER_LOW).
+ * @state_on:		print_state is overriden with state_on if attached.
+ *			If NULL, default method of extcon class is used.
+ * @state_off:		print_state is overriden with state_on if detached.
+ *			If NUll, default method of extcon class is used.
  *
  * Note that in order for state_on or state_off to be valid, both state_on
  * and state_off should be not NULL. If at least one of them is NULL,
@@ -41,6 +44,7 @@
 struct gpio_extcon_platform_data {
 	const char *name;
 	unsigned gpio;
+	bool gpio_active_low;
 	unsigned long debounce;
 	unsigned long irq_flags;
 
diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
index d98503bde7e..15da677478d 100644
--- a/include/linux/hyperv.h
+++ b/include/linux/hyperv.h
@@ -432,15 +432,6 @@ struct hv_ring_buffer_info {
 	u32 ring_data_startoffset;
 };
 
-struct hv_ring_buffer_debug_info {
-	u32 current_interrupt_mask;
-	u32 current_read_index;
-	u32 current_write_index;
-	u32 bytes_avail_toread;
-	u32 bytes_avail_towrite;
-};
-
-
 /*
  *
  * hv_get_ringbuffer_availbytes()
@@ -902,23 +893,6 @@ enum vmbus_channel_state {
 	CHANNEL_OPENED_STATE,
 };
 
-struct vmbus_channel_debug_info {
-	u32 relid;
-	enum vmbus_channel_state state;
-	uuid_le interfacetype;
-	uuid_le interface_instance;
-	u32 monitorid;
-	u32 servermonitor_pending;
-	u32 servermonitor_latency;
-	u32 servermonitor_connectionid;
-	u32 clientmonitor_pending;
-	u32 clientmonitor_latency;
-	u32 clientmonitor_connectionid;
-
-	struct hv_ring_buffer_debug_info inbound;
-	struct hv_ring_buffer_debug_info outbound;
-};
-
 /*
  * Represents each channel msg on the vmbus connection This is a
  * variable-size data structure depending on the msg type itself
@@ -1184,19 +1158,8 @@ extern int vmbus_recvpacket_raw(struct vmbus_channel *channel,
 				     u64 *requestid);
 
 
-extern void vmbus_get_debug_info(struct vmbus_channel *channel,
-				     struct vmbus_channel_debug_info *debug);
-
 extern void vmbus_ontimer(unsigned long data);
 
-struct hv_dev_port_info {
-	u32 int_mask;
-	u32 read_idx;
-	u32 write_idx;
-	u32 bytes_avail_toread;
-	u32 bytes_avail_towrite;
-};
-
 /* Base driver object */
 struct hv_driver {
 	const char *name;