Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking updates from David Miller:

 1) Alexey Kuznetsov noticed we routed TCP resets improperly in the
    assymetric routing case, fix this by reverting a change that made us
    use the incoming interface in the outgoing route key when we didn't
    have a socket context to work with.

 2) TCP sysctl kernel memory leakage to userspace fix from Alan Cox.

 3) Move UAPI bits from David Howells, WIMAX and CAN this time.

 4) Fix TX stalls in e1000e wrt.  Byte Queue Limits, from Hiroaki
    SHIMODA, Denys Fedoryshchenko, and Jesse Brandeburg.

 5) Fix IPV6 crashes in packet generator module, from Amerigo Wang.

 6) Tidies and fixes in the new VXLAN driver from Stephen Hemminger.

 7) Bridge IP options parse doesn't check first if SKB header has at
    least an IP header's worth of content present.  Fix from Sarveshwar
    Bandi.

 8) The kernel now generates compound pages on transmit and the Xen
    netback drivers needs some adjustments in order to handle this.  Fix
    from Ian Campbell.

 9) Turn off ASPM in JME driver, from Kevin Bardon and Matthew Garrett.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
  mcs7830: Fix link state detection
  net: add doc for in4_pton()
  net: add doc for in6_pton()
  vti: fix sparse bit endian warnings
  tcp: resets are misrouted
  usbnet: Support devices reporting idleness
  Add CDC-ACM support for the CX93010-2x UCMxx USB Modem
  net/ethernet/jme: disable ASPM
  tcp: sysctl interface leaks 16 bytes of kernel memory
  kaweth: print correct debug ptr
  e1000e: Change wthresh to 1 to avoid possible Tx stalls
  ipv4: fix route mark sparse warning
  xen: netback: handle compound page fragments on transmit.
  bridge: Pull ip header into skb->data before looking into ip header.
  isdn: fix a wrapping bug in isdn_ppp_ioctl()
  vxlan: fix oops when give unknown ifindex
  vxlan: fix receive checksum handling
  vxlan: add additional headroom
  vxlan: allow configuring port range
  vxlan: associate with tunnel socket on transmit
  ...

11 files changed, 18 insertions, 1059 deletions

diff --git a/include/linux/can/Kbuild b/include/linux/can/Kbuild
index c62b7f1728f..e69de29bb2d 100644
--- a/include/linux/can/Kbuild
+++ b/include/linux/can/Kbuild
@@ -1,5 +0,0 @@
-header-y += raw.h
-header-y += bcm.h
-header-y += gw.h
-header-y += error.h
-header-y += netlink.h
diff --git a/include/linux/can/bcm.h b/include/linux/can/bcm.h
deleted file mode 100644
index 3ebe387fea4..00000000000
--- a/include/linux/can/bcm.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * linux/can/bcm.h
- *
- * Definitions for CAN Broadcast Manager (BCM)
- *
- * Author: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
- * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
- * All rights reserved.
- *
- */
-
-#ifndef CAN_BCM_H
-#define CAN_BCM_H
-
-#include <linux/types.h>
-#include <linux/can.h>
-
-/**
- * struct bcm_msg_head - head of messages to/from the broadcast manager
- * @opcode:    opcode, see enum below.
- * @flags:     special flags, see below.
- * @count:     number of frames to send before changing interval.
- * @ival1:     interval for the first @count frames.
- * @ival2:     interval for the following frames.
- * @can_id:    CAN ID of frames to be sent or received.
- * @nframes:   number of frames appended to the message head.
- * @frames:    array of CAN frames.
- */
-struct bcm_msg_head {
-	__u32 opcode;
-	__u32 flags;
-	__u32 count;
-	struct timeval ival1, ival2;
-	canid_t can_id;
-	__u32 nframes;
-	struct can_frame frames[0];
-};
-
-enum {
-	TX_SETUP = 1,	/* create (cyclic) transmission task */
-	TX_DELETE,	/* remove (cyclic) transmission task */
-	TX_READ,	/* read properties of (cyclic) transmission task */
-	TX_SEND,	/* send one CAN frame */
-	RX_SETUP,	/* create RX content filter subscription */
-	RX_DELETE,	/* remove RX content filter subscription */
-	RX_READ,	/* read properties of RX content filter subscription */
-	TX_STATUS,	/* reply to TX_READ request */
-	TX_EXPIRED,	/* notification on performed transmissions (count=0) */
-	RX_STATUS,	/* reply to RX_READ request */
-	RX_TIMEOUT,	/* cyclic message is absent */
-	RX_CHANGED	/* updated CAN frame (detected content change) */
-};
-
-#define SETTIMER            0x0001
-#define STARTTIMER          0x0002
-#define TX_COUNTEVT         0x0004
-#define TX_ANNOUNCE         0x0008
-#define TX_CP_CAN_ID        0x0010
-#define RX_FILTER_ID        0x0020
-#define RX_CHECK_DLC        0x0040
-#define RX_NO_AUTOTIMER     0x0080
-#define RX_ANNOUNCE_RESUME  0x0100
-#define TX_RESET_MULTI_IDX  0x0200
-#define RX_RTR_FRAME        0x0400
-
-#endif /* CAN_BCM_H */
diff --git a/include/linux/can/error.h b/include/linux/can/error.h
deleted file mode 100644
index 7b7148bded7..00000000000
--- a/include/linux/can/error.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * linux/can/error.h
- *
- * Definitions of the CAN error messages to be filtered and passed to the user.
- *
- * Author: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
- * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
- * All rights reserved.
- *
- */
-
-#ifndef CAN_ERROR_H
-#define CAN_ERROR_H
-
-#define CAN_ERR_DLC 8 /* dlc for error message frames */
-
-/* error class (mask) in can_id */
-#define CAN_ERR_TX_TIMEOUT   0x00000001U /* TX timeout (by netdevice driver) */
-#define CAN_ERR_LOSTARB      0x00000002U /* lost arbitration    / data[0]    */
-#define CAN_ERR_CRTL         0x00000004U /* controller problems / data[1]    */
-#define CAN_ERR_PROT         0x00000008U /* protocol violations / data[2..3] */
-#define CAN_ERR_TRX          0x00000010U /* transceiver status  / data[4]    */
-#define CAN_ERR_ACK          0x00000020U /* received no ACK on transmission */
-#define CAN_ERR_BUSOFF       0x00000040U /* bus off */
-#define CAN_ERR_BUSERROR     0x00000080U /* bus error (may flood!) */
-#define CAN_ERR_RESTARTED    0x00000100U /* controller restarted */
-
-/* arbitration lost in bit ... / data[0] */
-#define CAN_ERR_LOSTARB_UNSPEC   0x00 /* unspecified */
-				      /* else bit number in bitstream */
-
-/* error status of CAN-controller / data[1] */
-#define CAN_ERR_CRTL_UNSPEC      0x00 /* unspecified */
-#define CAN_ERR_CRTL_RX_OVERFLOW 0x01 /* RX buffer overflow */
-#define CAN_ERR_CRTL_TX_OVERFLOW 0x02 /* TX buffer overflow */
-#define CAN_ERR_CRTL_RX_WARNING  0x04 /* reached warning level for RX errors */
-#define CAN_ERR_CRTL_TX_WARNING  0x08 /* reached warning level for TX errors */
-#define CAN_ERR_CRTL_RX_PASSIVE  0x10 /* reached error passive status RX */
-#define CAN_ERR_CRTL_TX_PASSIVE  0x20 /* reached error passive status TX */
-				      /* (at least one error counter exceeds */
-				      /* the protocol-defined level of 127)  */
-
-/* error in CAN protocol (type) / data[2] */
-#define CAN_ERR_PROT_UNSPEC      0x00 /* unspecified */
-#define CAN_ERR_PROT_BIT         0x01 /* single bit error */
-#define CAN_ERR_PROT_FORM        0x02 /* frame format error */
-#define CAN_ERR_PROT_STUFF       0x04 /* bit stuffing error */
-#define CAN_ERR_PROT_BIT0        0x08 /* unable to send dominant bit */
-#define CAN_ERR_PROT_BIT1        0x10 /* unable to send recessive bit */
-#define CAN_ERR_PROT_OVERLOAD    0x20 /* bus overload */
-#define CAN_ERR_PROT_ACTIVE      0x40 /* active error announcement */
-#define CAN_ERR_PROT_TX          0x80 /* error occurred on transmission */
-
-/* error in CAN protocol (location) / data[3] */
-#define CAN_ERR_PROT_LOC_UNSPEC  0x00 /* unspecified */
-#define CAN_ERR_PROT_LOC_SOF     0x03 /* start of frame */
-#define CAN_ERR_PROT_LOC_ID28_21 0x02 /* ID bits 28 - 21 (SFF: 10 - 3) */
-#define CAN_ERR_PROT_LOC_ID20_18 0x06 /* ID bits 20 - 18 (SFF: 2 - 0 )*/
-#define CAN_ERR_PROT_LOC_SRTR    0x04 /* substitute RTR (SFF: RTR) */
-#define CAN_ERR_PROT_LOC_IDE     0x05 /* identifier extension */
-#define CAN_ERR_PROT_LOC_ID17_13 0x07 /* ID bits 17-13 */
-#define CAN_ERR_PROT_LOC_ID12_05 0x0F /* ID bits 12-5 */
-#define CAN_ERR_PROT_LOC_ID04_00 0x0E /* ID bits 4-0 */
-#define CAN_ERR_PROT_LOC_RTR     0x0C /* RTR */
-#define CAN_ERR_PROT_LOC_RES1    0x0D /* reserved bit 1 */
-#define CAN_ERR_PROT_LOC_RES0    0x09 /* reserved bit 0 */
-#define CAN_ERR_PROT_LOC_DLC     0x0B /* data length code */
-#define CAN_ERR_PROT_LOC_DATA    0x0A /* data section */
-#define CAN_ERR_PROT_LOC_CRC_SEQ 0x08 /* CRC sequence */
-#define CAN_ERR_PROT_LOC_CRC_DEL 0x18 /* CRC delimiter */
-#define CAN_ERR_PROT_LOC_ACK     0x19 /* ACK slot */
-#define CAN_ERR_PROT_LOC_ACK_DEL 0x1B /* ACK delimiter */
-#define CAN_ERR_PROT_LOC_EOF     0x1A /* end of frame */
-#define CAN_ERR_PROT_LOC_INTERM  0x12 /* intermission */
-
-/* error status of CAN-transceiver / data[4] */
-/*                                             CANH CANL */
-#define CAN_ERR_TRX_UNSPEC             0x00 /* 0000 0000 */
-#define CAN_ERR_TRX_CANH_NO_WIRE       0x04 /* 0000 0100 */
-#define CAN_ERR_TRX_CANH_SHORT_TO_BAT  0x05 /* 0000 0101 */
-#define CAN_ERR_TRX_CANH_SHORT_TO_VCC  0x06 /* 0000 0110 */
-#define CAN_ERR_TRX_CANH_SHORT_TO_GND  0x07 /* 0000 0111 */
-#define CAN_ERR_TRX_CANL_NO_WIRE       0x40 /* 0100 0000 */
-#define CAN_ERR_TRX_CANL_SHORT_TO_BAT  0x50 /* 0101 0000 */
-#define CAN_ERR_TRX_CANL_SHORT_TO_VCC  0x60 /* 0110 0000 */
-#define CAN_ERR_TRX_CANL_SHORT_TO_GND  0x70 /* 0111 0000 */
-#define CAN_ERR_TRX_CANL_SHORT_TO_CANH 0x80 /* 1000 0000 */
-
-/* controller specific additional information / data[5..7] */
-
-#endif /* CAN_ERROR_H */
diff --git a/include/linux/can/gw.h b/include/linux/can/gw.h
deleted file mode 100644
index 8e1db18c3cb..00000000000
--- a/include/linux/can/gw.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * linux/can/gw.h
- *
- * Definitions for CAN frame Gateway/Router/Bridge
- *
- * Author: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
- * Copyright (c) 2011 Volkswagen Group Electronic Research
- * All rights reserved.
- *
- */
-
-#ifndef CAN_GW_H
-#define CAN_GW_H
-
-#include <linux/types.h>
-#include <linux/can.h>
-
-struct rtcanmsg {
-	__u8  can_family;
-	__u8  gwtype;
-	__u16 flags;
-};
-
-/* CAN gateway types */
-enum {
-	CGW_TYPE_UNSPEC,
-	CGW_TYPE_CAN_CAN,	/* CAN->CAN routing */
-	__CGW_TYPE_MAX
-};
-
-#define CGW_TYPE_MAX (__CGW_TYPE_MAX - 1)
-
-/* CAN rtnetlink attribute definitions */
-enum {
-	CGW_UNSPEC,
-	CGW_MOD_AND,	/* CAN frame modification binary AND */
-	CGW_MOD_OR,	/* CAN frame modification binary OR */
-	CGW_MOD_XOR,	/* CAN frame modification binary XOR */
-	CGW_MOD_SET,	/* CAN frame modification set alternate values */
-	CGW_CS_XOR,	/* set data[] XOR checksum into data[index] */
-	CGW_CS_CRC8,	/* set data[] CRC8 checksum into data[index] */
-	CGW_HANDLED,	/* number of handled CAN frames */
-	CGW_DROPPED,	/* number of dropped CAN frames */
-	CGW_SRC_IF,	/* ifindex of source network interface */
-	CGW_DST_IF,	/* ifindex of destination network interface */
-	CGW_FILTER,	/* specify struct can_filter on source CAN device */
-	__CGW_MAX
-};
-
-#define CGW_MAX (__CGW_MAX - 1)
-
-#define CGW_FLAGS_CAN_ECHO 0x01
-#define CGW_FLAGS_CAN_SRC_TSTAMP 0x02
-
-#define CGW_MOD_FUNCS 4 /* AND OR XOR SET */
-
-/* CAN frame elements that are affected by curr. 3 CAN frame modifications */
-#define CGW_MOD_ID	0x01
-#define CGW_MOD_DLC	0x02
-#define CGW_MOD_DATA	0x04
-
-#define CGW_FRAME_MODS 3 /* ID DLC DATA */
-
-#define MAX_MODFUNCTIONS (CGW_MOD_FUNCS * CGW_FRAME_MODS)
-
-struct cgw_frame_mod {
-	struct can_frame cf;
-	__u8 modtype;
-} __attribute__((packed));
-
-#define CGW_MODATTR_LEN sizeof(struct cgw_frame_mod)
-
-struct cgw_csum_xor {
-	__s8 from_idx;
-	__s8 to_idx;
-	__s8 result_idx;
-	__u8 init_xor_val;
-} __attribute__((packed));
-
-struct cgw_csum_crc8 {
-	__s8 from_idx;
-	__s8 to_idx;
-	__s8 result_idx;
-	__u8 init_crc_val;
-	__u8 final_xor_val;
-	__u8 crctab[256];
-	__u8 profile;
-	__u8 profile_data[20];
-} __attribute__((packed));
-
-/* length of checksum operation parameters. idx = index in CAN frame data[] */
-#define CGW_CS_XOR_LEN  sizeof(struct cgw_csum_xor)
-#define CGW_CS_CRC8_LEN  sizeof(struct cgw_csum_crc8)
-
-/* CRC8 profiles (compute CRC for additional data elements - see below) */
-enum {
-	CGW_CRC8PRF_UNSPEC,
-	CGW_CRC8PRF_1U8,	/* compute one additional u8 value */
-	CGW_CRC8PRF_16U8,	/* u8 value table indexed by data[1] & 0xF */
-	CGW_CRC8PRF_SFFID_XOR,	/* (can_id & 0xFF) ^ (can_id >> 8 & 0xFF) */
-	__CGW_CRC8PRF_MAX
-};
-
-#define CGW_CRC8PRF_MAX (__CGW_CRC8PRF_MAX - 1)
-
-/*
- * CAN rtnetlink attribute contents in detail
- *
- * CGW_XXX_IF (length 4 bytes):
- * Sets an interface index for source/destination network interfaces.
- * For the CAN->CAN gwtype the indices of _two_ CAN interfaces are mandatory.
- *
- * CGW_FILTER (length 8 bytes):
- * Sets a CAN receive filter for the gateway job specified by the
- * struct can_filter described in include/linux/can.h
- *
- * CGW_MOD_XXX (length 17 bytes):
- * Specifies a modification that's done to a received CAN frame before it is
- * send out to the destination interface.
- *
- * <struct can_frame> data used as operator
- * <u8> affected CAN frame elements
- *
- * CGW_CS_XOR (length 4 bytes):
- * Set a simple XOR checksum starting with an initial value into
- * data[result-idx] using data[start-idx] .. data[end-idx]
- *
- * The XOR checksum is calculated like this:
- *
- * xor = init_xor_val
- *
- * for (i = from_idx .. to_idx)
- *      xor ^= can_frame.data[i]
- *
- * can_frame.data[ result_idx ] = xor
- *
- * CGW_CS_CRC8 (length 282 bytes):
- * Set a CRC8 value into data[result-idx] using a given 256 byte CRC8 table,
- * a given initial value and a defined input data[start-idx] .. data[end-idx].
- * Finally the result value is XOR'ed with the final_xor_val.
- *
- * The CRC8 checksum is calculated like this:
- *
- * crc = init_crc_val
- *
- * for (i = from_idx .. to_idx)
- *      crc = crctab[ crc ^ can_frame.data[i] ]
- *
- * can_frame.data[ result_idx ] = crc ^ final_xor_val
- *
- * The calculated CRC may contain additional source data elements that can be
- * defined in the handling of 'checksum profiles' e.g. shown in AUTOSAR specs
- * like http://www.autosar.org/download/R4.0/AUTOSAR_SWS_E2ELibrary.pdf
- * E.g. the profile_data[] may contain additional u8 values (called DATA_IDs)
- * that are used depending on counter values inside the CAN frame data[].
- * So far only three profiles have been implemented for illustration.
- *
- * Remark: In general the attribute data is a linear buffer.
- *         Beware of sending unpacked or aligned structs!
- */
-
-#endif
diff --git a/include/linux/can/netlink.h b/include/linux/can/netlink.h
deleted file mode 100644
index 14966ddb7df..00000000000
--- a/include/linux/can/netlink.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * linux/can/netlink.h
- *
- * Definitions for the CAN netlink interface
- *
- * Copyright (c) 2009 Wolfgang Grandegger <wg@grandegger.com>
- *
- */
-
-#ifndef CAN_NETLINK_H
-#define CAN_NETLINK_H
-
-#include <linux/types.h>
-
-/*
- * CAN bit-timing parameters
- *
- * For further information, please read chapter "8 BIT TIMING
- * REQUIREMENTS" of the "Bosch CAN Specification version 2.0"
- * at http://www.semiconductors.bosch.de/pdf/can2spec.pdf.
- */
-struct can_bittiming {
-	__u32 bitrate;		/* Bit-rate in bits/second */
-	__u32 sample_point;	/* Sample point in one-tenth of a percent */
-	__u32 tq;		/* Time quanta (TQ) in nanoseconds */
-	__u32 prop_seg;		/* Propagation segment in TQs */
-	__u32 phase_seg1;	/* Phase buffer segment 1 in TQs */
-	__u32 phase_seg2;	/* Phase buffer segment 2 in TQs */
-	__u32 sjw;		/* Synchronisation jump width in TQs */
-	__u32 brp;		/* Bit-rate prescaler */
-};
-
-/*
- * CAN harware-dependent bit-timing constant
- *
- * Used for calculating and checking bit-timing parameters
- */
-struct can_bittiming_const {
-	char name[16];		/* Name of the CAN controller hardware */
-	__u32 tseg1_min;	/* Time segement 1 = prop_seg + phase_seg1 */
-	__u32 tseg1_max;
-	__u32 tseg2_min;	/* Time segement 2 = phase_seg2 */
-	__u32 tseg2_max;
-	__u32 sjw_max;		/* Synchronisation jump width */
-	__u32 brp_min;		/* Bit-rate prescaler */
-	__u32 brp_max;
-	__u32 brp_inc;
-};
-
-/*
- * CAN clock parameters
- */
-struct can_clock {
-	__u32 freq;		/* CAN system clock frequency in Hz */
-};
-
-/*
- * CAN operational and error states
- */
-enum can_state {
-	CAN_STATE_ERROR_ACTIVE = 0,	/* RX/TX error count < 96 */
-	CAN_STATE_ERROR_WARNING,	/* RX/TX error count < 128 */
-	CAN_STATE_ERROR_PASSIVE,	/* RX/TX error count < 256 */
-	CAN_STATE_BUS_OFF,		/* RX/TX error count >= 256 */
-	CAN_STATE_STOPPED,		/* Device is stopped */
-	CAN_STATE_SLEEPING,		/* Device is sleeping */
-	CAN_STATE_MAX
-};
-
-/*
- * CAN bus error counters
- */
-struct can_berr_counter {
-	__u16 txerr;
-	__u16 rxerr;
-};
-
-/*
- * CAN controller mode
- */
-struct can_ctrlmode {
-	__u32 mask;
-	__u32 flags;
-};
-
-#define CAN_CTRLMODE_LOOPBACK		0x01	/* Loopback mode */
-#define CAN_CTRLMODE_LISTENONLY		0x02 	/* Listen-only mode */
-#define CAN_CTRLMODE_3_SAMPLES		0x04	/* Triple sampling mode */
-#define CAN_CTRLMODE_ONE_SHOT		0x08	/* One-Shot mode */
-#define CAN_CTRLMODE_BERR_REPORTING	0x10	/* Bus-error reporting */
-
-/*
- * CAN device statistics
- */
-struct can_device_stats {
-	__u32 bus_error;	/* Bus errors */
-	__u32 error_warning;	/* Changes to error warning state */
-	__u32 error_passive;	/* Changes to error passive state */
-	__u32 bus_off;		/* Changes to bus off state */
-	__u32 arbitration_lost; /* Arbitration lost errors */
-	__u32 restarts;		/* CAN controller re-starts */
-};
-
-/*
- * CAN netlink interface
- */
-enum {
-	IFLA_CAN_UNSPEC,
-	IFLA_CAN_BITTIMING,
-	IFLA_CAN_BITTIMING_CONST,
-	IFLA_CAN_CLOCK,
-	IFLA_CAN_STATE,
-	IFLA_CAN_CTRLMODE,
-	IFLA_CAN_RESTART_MS,
-	IFLA_CAN_RESTART,
-	IFLA_CAN_BERR_COUNTER,
-	__IFLA_CAN_MAX
-};
-
-#define IFLA_CAN_MAX	(__IFLA_CAN_MAX - 1)
-
-#endif /* CAN_NETLINK_H */
diff --git a/include/linux/can/raw.h b/include/linux/can/raw.h
deleted file mode 100644
index a814062b071..00000000000
--- a/include/linux/can/raw.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * linux/can/raw.h
- *
- * Definitions for raw CAN sockets
- *
- * Authors: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
- *          Urs Thuermann   <urs.thuermann@volkswagen.de>
- * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
- * All rights reserved.
- *
- */
-
-#ifndef CAN_RAW_H
-#define CAN_RAW_H
-
-#include <linux/can.h>
-
-#define SOL_CAN_RAW (SOL_CAN_BASE + CAN_RAW)
-
-/* for socket options affecting the socket (not the global system) */
-
-enum {
-	CAN_RAW_FILTER = 1,	/* set 0 .. n can_filter(s)          */
-	CAN_RAW_ERR_FILTER,	/* set filter for error frames       */
-	CAN_RAW_LOOPBACK,	/* local loopback (default:on)       */
-	CAN_RAW_RECV_OWN_MSGS,	/* receive my own msgs (default:off) */
-	CAN_RAW_FD_FRAMES,	/* allow CAN FD frames (default:off) */
-};
-
-#endif
diff --git a/include/linux/if_link.h b/include/linux/if_link.h
index e4dad4ddf08..3265f332998 100644
--- a/include/linux/if_link.h
+++ b/include/linux/if_link.h
@@ -284,10 +284,16 @@ enum {
 	IFLA_VXLAN_LEARNING,
 	IFLA_VXLAN_AGEING,
 	IFLA_VXLAN_LIMIT,
+	IFLA_VXLAN_PORT_RANGE,
 	__IFLA_VXLAN_MAX
 };
 #define IFLA_VXLAN_MAX	(__IFLA_VXLAN_MAX - 1)
 
+struct ifla_vxlan_port_range {
+	__be16	low;
+	__be16	high;
+};
+
 /* SR-IOV virtual function management section */
 
 enum {
diff --git a/include/linux/of_mdio.h b/include/linux/of_mdio.h
index 6ef49b803ef..8163107b94b 100644
--- a/include/linux/of_mdio.h
+++ b/include/linux/of_mdio.h
@@ -26,32 +26,32 @@ extern struct phy_device *of_phy_connect_fixed_link(struct net_device *dev,
 extern struct mii_bus *of_mdio_find_bus(struct device_node *mdio_np);
 
 #else /* CONFIG_OF */
-int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
+static inline int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
 {
 	return -ENOSYS;
 }
 
-struct phy_device *of_phy_find_device(struct device_node *phy_np)
+static inline struct phy_device *of_phy_find_device(struct device_node *phy_np)
 {
 	return NULL;
 }
 
-struct phy_device *of_phy_connect(struct net_device *dev,
-					 struct device_node *phy_np,
-					 void (*hndlr)(struct net_device *),
-					 u32 flags, phy_interface_t iface)
+static inline struct phy_device *of_phy_connect(struct net_device *dev,
+						struct device_node *phy_np,
+						void (*hndlr)(struct net_device *),
+						u32 flags, phy_interface_t iface)
 {
 	return NULL;
 }
 
-struct phy_device *of_phy_connect_fixed_link(struct net_device *dev,
-					 void (*hndlr)(struct net_device *),
-					 phy_interface_t iface)
+static inline struct phy_device *of_phy_connect_fixed_link(struct net_device *dev,
+							   void (*hndlr)(struct net_device *),
+							   phy_interface_t iface)
 {
 	return NULL;
 }
 
-struct mii_bus *of_mdio_find_bus(struct device_node *mdio_np)
+static inline struct mii_bus *of_mdio_find_bus(struct device_node *mdio_np)
 {
 	return NULL;
 }
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index f87cf622317..ddbbb7de894 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -68,6 +68,7 @@ struct usbnet {
 #		define EVENT_RX_PAUSED	5
 #		define EVENT_DEV_ASLEEP 6
 #		define EVENT_DEV_OPEN	7
+#		define EVENT_DEVICE_REPORT_IDLE	8
 };
 
 static inline struct usb_driver *driver_of(struct usb_interface *intf)
@@ -160,6 +161,7 @@ extern int usbnet_probe(struct usb_interface *, const struct usb_device_id *);
 extern int usbnet_suspend(struct usb_interface *, pm_message_t);
 extern int usbnet_resume(struct usb_interface *);
 extern void usbnet_disconnect(struct usb_interface *);
+extern void usbnet_device_suggests_idle(struct usbnet *dev);
 
 
 /* Drivers that reuse some of the standard USB CDC infrastructure
diff --git a/include/linux/wimax/Kbuild b/include/linux/wimax/Kbuild
index 3cb4f269bb0..e69de29bb2d 100644
--- a/include/linux/wimax/Kbuild
+++ b/include/linux/wimax/Kbuild
@@ -1 +0,0 @@
-header-y += i2400m.h
diff --git a/include/linux/wimax/i2400m.h b/include/linux/wimax/i2400m.h
deleted file mode 100644
index 62d35615356..00000000000
--- a/include/linux/wimax/i2400m.h
+++ /dev/null
@@ -1,572 +0,0 @@
-/*
- * Intel Wireless WiMax Connection 2400m
- * Host-Device protocol interface definitions
- *
- *
- * Copyright (C) 2007-2008 Intel Corporation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *   * Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *   * Redistributions in binary form must reproduce the above copyright
- *     notice, this list of conditions and the following disclaimer in
- *     the documentation and/or other materials provided with the
- *     distribution.
- *   * Neither the name of Intel Corporation nor the names of its
- *     contributors may be used to endorse or promote products derived
- *     from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *
- * Intel Corporation <linux-wimax@intel.com>
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *  - Initial implementation
- *
- *
- * This header defines the data structures and constants used to
- * communicate with the device.
- *
- * BOOTMODE/BOOTROM/FIRMWARE UPLOAD PROTOCOL
- *
- * The firmware upload protocol is quite simple and only requires a
- * handful of commands. See drivers/net/wimax/i2400m/fw.c for more
- * details.
- *
- * The BCF data structure is for the firmware file header.
- *
- *
- * THE DATA / CONTROL PROTOCOL
- *
- * This is the normal protocol spoken with the device once the
- * firmware is uploaded. It transports data payloads and control
- * messages back and forth.
- *
- * It consists 'messages' that pack one or more payloads each. The
- * format is described in detail in drivers/net/wimax/i2400m/rx.c and
- * tx.c.
- *
- *
- * THE L3L4 PROTOCOL
- *
- * The term L3L4 refers to Layer 3 (the device), Layer 4 (the
- * driver/host software).
- *
- * This is the control protocol used by the host to control the i2400m
- * device (scan, connect, disconnect...). This is sent to / received
- * as control frames. These frames consist of a header and zero or
- * more TLVs with information. We call each control frame a "message".
- *
- * Each message is composed of:
- *
- * HEADER
- * [TLV0 + PAYLOAD0]
- * [TLV1 + PAYLOAD1]
- * [...]
- * [TLVN + PAYLOADN]
- *
- * The HEADER is defined by 'struct i2400m_l3l4_hdr'. The payloads are
- * defined by a TLV structure (Type Length Value) which is a 'header'
- * (struct i2400m_tlv_hdr) and then the payload.
- *
- * All integers are represented as Little Endian.
- *
- * - REQUESTS AND EVENTS
- *
- * The requests can be clasified as follows:
- *
- *   COMMAND:  implies a request from the host to the device requesting
- *             an action being performed. The device will reply with a
- *             message (with the same type as the command), status and
- *             no (TLV) payload. Execution of a command might cause
- *             events (of different type) to be sent later on as
- *             device's state changes.
- *
- *   GET/SET:  similar to COMMAND, but will not cause other
- *             EVENTs. The reply, in the case of GET, will contain
- *             TLVs with the requested information.
- *
- *   EVENT:    asynchronous messages sent from the device, maybe as a
- *             consequence of previous COMMANDs but disassociated from
- *             them.
- *
- * Only one request might be pending at the same time (ie: don't
- * parallelize nor post another GET request before the previous
- * COMMAND has been acknowledged with it's corresponding reply by the
- * device).
- *
- * The different requests and their formats are described below:
- *
- *  I2400M_MT_*   Message types
- *  I2400M_MS_*   Message status (for replies, events)
- *  i2400m_tlv_*  TLVs
- *
- * data types are named 'struct i2400m_msg_OPNAME', OPNAME matching the
- * operation.
- */
-
-#ifndef __LINUX__WIMAX__I2400M_H__
-#define __LINUX__WIMAX__I2400M_H__
-
-#include <linux/types.h>
-
-
-/*
- * Host Device Interface (HDI) common to all busses
- */
-
-/* Boot-mode (firmware upload mode) commands */
-
-/* Header for the firmware file */
-struct i2400m_bcf_hdr {
-	__le32 module_type;
-	__le32 header_len;
-	__le32 header_version;
-	__le32 module_id;
-	__le32 module_vendor;
-	__le32 date;		/* BCD YYYMMDD */
-	__le32 size;            /* in dwords */
-	__le32 key_size;	/* in dwords */
-	__le32 modulus_size;	/* in dwords */
-	__le32 exponent_size;	/* in dwords */
-	__u8 reserved[88];
-} __attribute__ ((packed));
-
-/* Boot mode opcodes */
-enum i2400m_brh_opcode {
-	I2400M_BRH_READ = 1,
-	I2400M_BRH_WRITE = 2,
-	I2400M_BRH_JUMP = 3,
-	I2400M_BRH_SIGNED_JUMP = 8,
-	I2400M_BRH_HASH_PAYLOAD_ONLY = 9,
-};
-
-/* Boot mode command masks and stuff */
-enum i2400m_brh {
-	I2400M_BRH_SIGNATURE = 0xcbbc0000,
-	I2400M_BRH_SIGNATURE_MASK = 0xffff0000,
-	I2400M_BRH_SIGNATURE_SHIFT = 16,
-	I2400M_BRH_OPCODE_MASK = 0x0000000f,
-	I2400M_BRH_RESPONSE_MASK = 0x000000f0,
-	I2400M_BRH_RESPONSE_SHIFT = 4,
-	I2400M_BRH_DIRECT_ACCESS = 0x00000400,
-	I2400M_BRH_RESPONSE_REQUIRED = 0x00000200,
-	I2400M_BRH_USE_CHECKSUM = 0x00000100,
-};
-
-
-/**
- * i2400m_bootrom_header - Header for a boot-mode command
- *
- * @cmd: the above command descriptor
- * @target_addr: where on the device memory should the action be performed.
- * @data_size: for read/write, amount of data to be read/written
- * @block_checksum: checksum value (if applicable)
- * @payload: the beginning of data attached to this header
- */
-struct i2400m_bootrom_header {
-	__le32 command;		/* Compose with enum i2400_brh */
-	__le32 target_addr;
-	__le32 data_size;
-	__le32 block_checksum;
-	char payload[0];
-} __attribute__ ((packed));
-
-
-/*
- * Data / control protocol
- */
-
-/* Packet types for the host-device interface */
-enum i2400m_pt {
-	I2400M_PT_DATA = 0,
-	I2400M_PT_CTRL,
-	I2400M_PT_TRACE,	/* For device debug */
-	I2400M_PT_RESET_WARM,	/* device reset */
-	I2400M_PT_RESET_COLD,	/* USB[transport] reset, like reconnect */
-	I2400M_PT_EDATA,	/* Extended RX data */
-	I2400M_PT_ILLEGAL
-};
-
-
-/*
- * Payload for a data packet
- *
- * This is prefixed to each and every outgoing DATA type.
- */
-struct i2400m_pl_data_hdr {
-	__le32 reserved;
-} __attribute__((packed));
-
-
-/*
- * Payload for an extended data packet
- *
- * New in fw v1.4
- *
- * @reorder: if this payload has to be reorder or not (and how)
- * @cs: the type of data in the packet, as defined per (802.16e
- *     T11.13.19.1). Currently only 2 (IPv4 packet) supported.
- *
- * This is prefixed to each and every INCOMING DATA packet.
- */
-struct i2400m_pl_edata_hdr {
-	__le32 reorder;		/* bits defined in i2400m_ro */
-	__u8 cs;
-	__u8 reserved[11];
-} __attribute__((packed));
-
-enum i2400m_cs {
-	I2400M_CS_IPV4_0 = 0,
-	I2400M_CS_IPV4 = 2,
-};
-
-enum i2400m_ro {
-	I2400M_RO_NEEDED     = 0x01,
-	I2400M_RO_TYPE       = 0x03,
-	I2400M_RO_TYPE_SHIFT = 1,
-	I2400M_RO_CIN        = 0x0f,
-	I2400M_RO_CIN_SHIFT  = 4,
-	I2400M_RO_FBN        = 0x07ff,
-	I2400M_RO_FBN_SHIFT  = 8,
-	I2400M_RO_SN         = 0x07ff,
-	I2400M_RO_SN_SHIFT   = 21,
-};
-
-enum i2400m_ro_type {
-	I2400M_RO_TYPE_RESET = 0,
-	I2400M_RO_TYPE_PACKET,
-	I2400M_RO_TYPE_WS,
-	I2400M_RO_TYPE_PACKET_WS,
-};
-
-
-/* Misc constants */
-enum {
-	I2400M_PL_ALIGN = 16,	/* Payload data size alignment */
-	I2400M_PL_SIZE_MAX = 0x3EFF,
-	I2400M_MAX_PLS_IN_MSG = 60,
-	/* protocol barkers: sync sequences; for notifications they
-	 * are sent in groups of four. */
-	I2400M_H2D_PREVIEW_BARKER = 0xcafe900d,
-	I2400M_COLD_RESET_BARKER = 0xc01dc01d,
-	I2400M_WARM_RESET_BARKER = 0x50f750f7,
-	I2400M_NBOOT_BARKER = 0xdeadbeef,
-	I2400M_SBOOT_BARKER = 0x0ff1c1a1,
-	I2400M_SBOOT_BARKER_6050 = 0x80000001,
-	I2400M_ACK_BARKER = 0xfeedbabe,
-	I2400M_D2H_MSG_BARKER = 0xbeefbabe,
-};
-
-
-/*
- * Hardware payload descriptor
- *
- * Bitfields encoded in a struct to enforce typing semantics.
- *
- * Look in rx.c and tx.c for a full description of the format.
- */
-struct i2400m_pld {
-	__le32 val;
-} __attribute__ ((packed));
-
-#define I2400M_PLD_SIZE_MASK 0x00003fff
-#define I2400M_PLD_TYPE_SHIFT 16
-#define I2400M_PLD_TYPE_MASK 0x000f0000
-
-/*
- * Header for a TX message or RX message
- *
- * @barker: preamble
- * @size: used for management of the FIFO queue buffer; before
- *     sending, this is converted to be a real preamble. This
- *     indicates the real size of the TX message that starts at this
- *     point. If the highest bit is set, then this message is to be
- *     skipped.
- * @sequence: sequence number of this message
- * @offset: offset where the message itself starts -- see the comments
- *     in the file header about message header and payload descriptor
- *     alignment.
- * @num_pls: number of payloads in this message
- * @padding: amount of padding bytes at the end of the message to make
- *           it be of block-size aligned
- *
- * Look in rx.c and tx.c for a full description of the format.
- */
-struct i2400m_msg_hdr {
-	union {
-		__le32 barker;
-		__u32 size;	/* same size type as barker!! */
-	};
-	union {
-		__le32 sequence;
-		__u32 offset;	/* same size type as barker!! */
-	};
-	__le16 num_pls;
-	__le16 rsv1;
-	__le16 padding;
-	__le16 rsv2;
-	struct i2400m_pld pld[0];
-} __attribute__ ((packed));
-
-
-
-/*
- * L3/L4 control protocol
- */
-
-enum {
-	/* Interface version */
-	I2400M_L3L4_VERSION             = 0x0100,
-};
-
-/* Message types */
-enum i2400m_mt {
-	I2400M_MT_RESERVED              = 0x0000,
-	I2400M_MT_INVALID               = 0xffff,
-	I2400M_MT_REPORT_MASK		= 0x8000,
-
-	I2400M_MT_GET_SCAN_RESULT  	= 0x4202,
-	I2400M_MT_SET_SCAN_PARAM   	= 0x4402,
-	I2400M_MT_CMD_RF_CONTROL   	= 0x4602,
-	I2400M_MT_CMD_SCAN         	= 0x4603,
-	I2400M_MT_CMD_CONNECT      	= 0x4604,
-	I2400M_MT_CMD_DISCONNECT   	= 0x4605,
-	I2400M_MT_CMD_EXIT_IDLE   	= 0x4606,
-	I2400M_MT_GET_LM_VERSION   	= 0x5201,
-	I2400M_MT_GET_DEVICE_INFO  	= 0x5202,
-	I2400M_MT_GET_LINK_STATUS  	= 0x5203,
-	I2400M_MT_GET_STATISTICS   	= 0x5204,
-	I2400M_MT_GET_STATE        	= 0x5205,
-	I2400M_MT_GET_MEDIA_STATUS	= 0x5206,
-	I2400M_MT_SET_INIT_CONFIG	= 0x5404,
-	I2400M_MT_CMD_INIT	        = 0x5601,
-	I2400M_MT_CMD_TERMINATE		= 0x5602,
-	I2400M_MT_CMD_MODE_OF_OP	= 0x5603,
-	I2400M_MT_CMD_RESET_DEVICE	= 0x5604,
-	I2400M_MT_CMD_MONITOR_CONTROL   = 0x5605,
-	I2400M_MT_CMD_ENTER_POWERSAVE   = 0x5606,
-	I2400M_MT_GET_TLS_OPERATION_RESULT = 0x6201,
-	I2400M_MT_SET_EAP_SUCCESS       = 0x6402,
-	I2400M_MT_SET_EAP_FAIL          = 0x6403,
-	I2400M_MT_SET_EAP_KEY          	= 0x6404,
-	I2400M_MT_CMD_SEND_EAP_RESPONSE = 0x6602,
-	I2400M_MT_REPORT_SCAN_RESULT    = 0xc002,
-	I2400M_MT_REPORT_STATE		= 0xd002,
-	I2400M_MT_REPORT_POWERSAVE_READY = 0xd005,
-	I2400M_MT_REPORT_EAP_REQUEST    = 0xe002,
-	I2400M_MT_REPORT_EAP_RESTART    = 0xe003,
-	I2400M_MT_REPORT_ALT_ACCEPT    	= 0xe004,
-	I2400M_MT_REPORT_KEY_REQUEST 	= 0xe005,
-};
-
-
-/*
- * Message Ack Status codes
- *
- * When a message is replied-to, this status is reported.
- */
-enum i2400m_ms {
-	I2400M_MS_DONE_OK                  = 0,
-	I2400M_MS_DONE_IN_PROGRESS         = 1,
-	I2400M_MS_INVALID_OP               = 2,
-	I2400M_MS_BAD_STATE                = 3,
-	I2400M_MS_ILLEGAL_VALUE            = 4,
-	I2400M_MS_MISSING_PARAMS           = 5,
-	I2400M_MS_VERSION_ERROR            = 6,
-	I2400M_MS_ACCESSIBILITY_ERROR      = 7,
-	I2400M_MS_BUSY                     = 8,
-	I2400M_MS_CORRUPTED_TLV            = 9,
-	I2400M_MS_UNINITIALIZED            = 10,
-	I2400M_MS_UNKNOWN_ERROR            = 11,
-	I2400M_MS_PRODUCTION_ERROR         = 12,
-	I2400M_MS_NO_RF                    = 13,
-	I2400M_MS_NOT_READY_FOR_POWERSAVE  = 14,
-	I2400M_MS_THERMAL_CRITICAL         = 15,
-	I2400M_MS_MAX
-};
-
-
-/**
- * i2400m_tlv - enumeration of the different types of TLVs
- *
- * TLVs stand for type-length-value and are the header for a payload
- * composed of almost anything. Each payload has a type assigned
- * and a length.
- */
-enum i2400m_tlv {
-	I2400M_TLV_L4_MESSAGE_VERSIONS = 129,
-	I2400M_TLV_SYSTEM_STATE = 141,
-	I2400M_TLV_MEDIA_STATUS = 161,
-	I2400M_TLV_RF_OPERATION = 162,
-	I2400M_TLV_RF_STATUS = 163,
-	I2400M_TLV_DEVICE_RESET_TYPE = 132,
-	I2400M_TLV_CONFIG_IDLE_PARAMETERS = 601,
-	I2400M_TLV_CONFIG_IDLE_TIMEOUT = 611,
-	I2400M_TLV_CONFIG_D2H_DATA_FORMAT = 614,
-	I2400M_TLV_CONFIG_DL_HOST_REORDER = 615,
-};
-
-
-struct i2400m_tlv_hdr {
-	__le16 type;
-	__le16 length;		/* payload's */
-	__u8   pl[0];
-} __attribute__((packed));
-
-
-struct i2400m_l3l4_hdr {
-	__le16 type;
-	__le16 length;		/* payload's */
-	__le16 version;
-	__le16 resv1;
-	__le16 status;
-	__le16 resv2;
-	struct i2400m_tlv_hdr pl[0];
-} __attribute__((packed));
-
-
-/**
- * i2400m_system_state - different states of the device
- */
-enum i2400m_system_state {
-	I2400M_SS_UNINITIALIZED = 1,
-	I2400M_SS_INIT,
-	I2400M_SS_READY,
-	I2400M_SS_SCAN,
-	I2400M_SS_STANDBY,
-	I2400M_SS_CONNECTING,
-	I2400M_SS_WIMAX_CONNECTED,
-	I2400M_SS_DATA_PATH_CONNECTED,
-	I2400M_SS_IDLE,
-	I2400M_SS_DISCONNECTING,
-	I2400M_SS_OUT_OF_ZONE,
-	I2400M_SS_SLEEPACTIVE,
-	I2400M_SS_PRODUCTION,
-	I2400M_SS_CONFIG,
-	I2400M_SS_RF_OFF,
-	I2400M_SS_RF_SHUTDOWN,
-	I2400M_SS_DEVICE_DISCONNECT,
-	I2400M_SS_MAX,
-};
-
-
-/**
- * i2400m_tlv_system_state - report on the state of the system
- *
- * @state: see enum i2400m_system_state
- */
-struct i2400m_tlv_system_state {
-	struct i2400m_tlv_hdr hdr;
-	__le32 state;
-} __attribute__((packed));
-
-
-struct i2400m_tlv_l4_message_versions {
-	struct i2400m_tlv_hdr hdr;
-	__le16 major;
-	__le16 minor;
-	__le16 branch;
-	__le16 reserved;
-} __attribute__((packed));
-
-
-struct i2400m_tlv_detailed_device_info {
-	struct i2400m_tlv_hdr hdr;
-	__u8 reserved1[400];
-	__u8 mac_address[6];
-	__u8 reserved2[2];
-} __attribute__((packed));
-
-
-enum i2400m_rf_switch_status {
-	I2400M_RF_SWITCH_ON = 1,
-	I2400M_RF_SWITCH_OFF = 2,
-};
-
-struct i2400m_tlv_rf_switches_status {
-	struct i2400m_tlv_hdr hdr;
-	__u8 sw_rf_switch;	/* 1 ON, 2 OFF */
-	__u8 hw_rf_switch;	/* 1 ON, 2 OFF */
-	__u8 reserved[2];
-} __attribute__((packed));
-
-
-enum {
-	i2400m_rf_operation_on = 1,
-	i2400m_rf_operation_off = 2
-};
-
-struct i2400m_tlv_rf_operation {
-	struct i2400m_tlv_hdr hdr;
-	__le32 status;	/* 1 ON, 2 OFF */
-} __attribute__((packed));
-
-
-enum i2400m_tlv_reset_type {
-	I2400M_RESET_TYPE_COLD = 1,
-	I2400M_RESET_TYPE_WARM
-};
-
-struct i2400m_tlv_device_reset_type {
-	struct i2400m_tlv_hdr hdr;
-	__le32 reset_type;
-} __attribute__((packed));
-
-
-struct i2400m_tlv_config_idle_parameters {
-	struct i2400m_tlv_hdr hdr;
-	__le32 idle_timeout;	/* 100 to 300000 ms [5min], 100 increments
-				 * 0 disabled */
-	__le32 idle_paging_interval;	/* frames */
-} __attribute__((packed));
-
-
-enum i2400m_media_status {
-	I2400M_MEDIA_STATUS_LINK_UP = 1,
-	I2400M_MEDIA_STATUS_LINK_DOWN,
-	I2400M_MEDIA_STATUS_LINK_RENEW,
-};
-
-struct i2400m_tlv_media_status {
-	struct i2400m_tlv_hdr hdr;
-	__le32 media_status;
-} __attribute__((packed));
-
-
-/* New in v1.4 */
-struct i2400m_tlv_config_idle_timeout {
-	struct i2400m_tlv_hdr hdr;
-	__le32 timeout;	/* 100 to 300000 ms [5min], 100 increments
-			 * 0 disabled */
-} __attribute__((packed));
-
-/* New in v1.4 -- for backward compat, will be removed */
-struct i2400m_tlv_config_d2h_data_format {
-	struct i2400m_tlv_hdr hdr;
-	__u8 format; 		/* 0 old format, 1 enhanced */
-	__u8 reserved[3];
-} __attribute__((packed));
-
-/* New in v1.4 */
-struct i2400m_tlv_config_dl_host_reorder {
-	struct i2400m_tlv_hdr hdr;
-	__u8 reorder; 		/* 0 disabled, 1 enabled */
-	__u8 reserved[3];
-} __attribute__((packed));
-
-
-#endif /* #ifndef __LINUX__WIMAX__I2400M_H__ */