diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-07-24 10:01:50 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-07-24 10:01:50 -0700 |
| commit | 3c4cfadef6a1665d9cd02a543782d03d3e6740c6 (patch) | |
| tree | 3df72faaacd494d5ac8c9668df4f529b1b5e4457 /include/linux | |
| parent | e017507f37d5cb8b541df165a824958bc333bec3 (diff) | |
| parent | 320f5ea0cedc08ef65d67e056bcb9d181386ef2c (diff) | |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking changes from David S Miller:
1) Remove the ipv4 routing cache. Now lookups go directly into the FIB
trie and use prebuilt routes cached there.
No more garbage collection, no more rDOS attacks on the routing
cache. Instead we now get predictable and consistent performance,
no matter what the pattern of traffic we service.
This has been almost 2 years in the making. Special thanks to
Julian Anastasov, Eric Dumazet, Steffen Klassert, and others who
have helped along the way.
I'm sure that with a change of this magnitude there will be some
kind of fallout, but such things ought the be simple to fix at this
point. Luckily I'm not European so I'll be around all of August to
fix things :-)
The major stages of this work here are each fronted by a forced
merge commit whose commit message contains a top-level description
of the motivations and implementation issues.
2) Pre-demux of established ipv4 TCP sockets, saves a route demux on
input.
3) TCP SYN/ACK performance tweaks from Eric Dumazet.
4) Add namespace support for netfilter L4 conntrack helpers, from Gao
Feng.
5) Add config mechanism for Energy Efficient Ethernet to ethtool, from
Yuval Mintz.
6) Remove quadratic behavior from /proc/net/unix, from Eric Dumazet.
7) Support for connection tracker helpers in userspace, from Pablo
Neira Ayuso.
8) Allow userspace driven TX load balancing functions in TEAM driver,
from Jiri Pirko.
9) Kill off NLMSG_PUT and RTA_PUT macros, more gross stuff with
embedded gotos.
10) TCP Small Queues, essentially minimize the amount of TCP data queued
up in the packet scheduler layer. Whereas the existing BQL (Byte
Queue Limits) limits the pkt_sched --> netdevice queuing levels,
this controls the TCP --> pkt_sched queueing levels.
From Eric Dumazet.
11) Reduce the number of get_page/put_page ops done on SKB fragments,
from Alexander Duyck.
12) Implement protection against blind resets in TCP (RFC 5961), from
Eric Dumazet.
13) Support the client side of TCP Fast Open, basically the ability to
send data in the SYN exchange, from Yuchung Cheng.
Basically, the sender queues up data with a sendmsg() call using
MSG_FASTOPEN, then they do the connect() which emits the queued up
fastopen data.
14) Avoid all the problems we get into in TCP when timers or PMTU events
hit a locked socket. The TCP Small Queues changes added a
tcp_release_cb() that allows us to queue work up to the
release_sock() caller, and that's what we use here too. From Eric
Dumazet.
15) Zero copy on TX support for TUN driver, from Michael S. Tsirkin.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1870 commits)
genetlink: define lockdep_genl_is_held() when CONFIG_LOCKDEP
r8169: revert "add byte queue limit support".
ipv4: Change rt->rt_iif encoding.
net: Make skb->skb_iif always track skb->dev
ipv4: Prepare for change of rt->rt_iif encoding.
ipv4: Remove all RTCF_DIRECTSRC handliing.
ipv4: Really ignore ICMP address requests/replies.
decnet: Don't set RTCF_DIRECTSRC.
net/ipv4/ip_vti.c: Fix __rcu warnings detected by sparse.
ipv4: Remove redundant assignment
rds: set correct msg_namelen
openvswitch: potential NULL deref in sample()
tcp: dont drop MTU reduction indications
bnx2x: Add new 57840 device IDs
tcp: avoid oops in tcp_metrics and reset tcpm_stamp
niu: Change niu_rbr_fill() to use unlikely() to check niu_rbr_add_page() return value
niu: Fix to check for dma mapping errors.
net: Fix references to out-of-scope variables in put_cmsg_compat()
net: ethernet: davinci_emac: add pm_runtime support
net: ethernet: davinci_emac: Remove unnecessary #include
...
Diffstat (limited to 'include/linux')
58 files changed, 1419 insertions, 336 deletions
diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index 8deaf6d050c..1954a4e305a 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -7,6 +7,7 @@ #include <linux/bcma/bcma_driver_chipcommon.h> #include <linux/bcma/bcma_driver_pci.h> #include <linux/bcma/bcma_driver_mips.h> +#include <linux/bcma/bcma_driver_gmac_cmn.h> #include <linux/ssb/ssb.h> /* SPROM sharing */ #include "bcma_regs.h" @@ -70,6 +71,13 @@ struct bcma_host_ops { /* Core-ID values. */ #define BCMA_CORE_OOB_ROUTER 0x367 /* Out of band */ +#define BCMA_CORE_4706_CHIPCOMMON 0x500 +#define BCMA_CORE_4706_SOC_RAM 0x50E +#define BCMA_CORE_4706_MAC_GBIT 0x52D +#define BCMA_CORE_AMEMC 0x52E /* DDR1/2 memory controller core */ +#define BCMA_CORE_ALTA 0x534 /* I2S core */ +#define BCMA_CORE_4706_MAC_GBIT_COMMON 0x5DC +#define BCMA_CORE_DDR23_PHY 0x5DD #define BCMA_CORE_INVALID 0x700 #define BCMA_CORE_CHIPCOMMON 0x800 #define BCMA_CORE_ILINE20 0x801 @@ -130,6 +138,36 @@ struct bcma_host_ops { #define BCMA_MAX_NR_CORES 16 +/* Chip IDs of PCIe devices */ +#define BCMA_CHIP_ID_BCM4313 0x4313 +#define BCMA_CHIP_ID_BCM43224 43224 +#define BCMA_PKG_ID_BCM43224_FAB_CSM 0x8 +#define BCMA_PKG_ID_BCM43224_FAB_SMIC 0xa +#define BCMA_CHIP_ID_BCM43225 43225 +#define BCMA_CHIP_ID_BCM43227 43227 +#define BCMA_CHIP_ID_BCM43228 43228 +#define BCMA_CHIP_ID_BCM43421 43421 +#define BCMA_CHIP_ID_BCM43428 43428 +#define BCMA_CHIP_ID_BCM43431 43431 +#define BCMA_CHIP_ID_BCM43460 43460 +#define BCMA_CHIP_ID_BCM4331 0x4331 +#define BCMA_CHIP_ID_BCM6362 0x6362 +#define BCMA_CHIP_ID_BCM4360 0x4360 +#define BCMA_CHIP_ID_BCM4352 0x4352 + +/* Chip IDs of SoCs */ +#define BCMA_CHIP_ID_BCM4706 0x5300 +#define BCMA_CHIP_ID_BCM4716 0x4716 +#define BCMA_PKG_ID_BCM4716 8 +#define BCMA_PKG_ID_BCM4717 9 +#define BCMA_PKG_ID_BCM4718 10 +#define BCMA_CHIP_ID_BCM47162 47162 +#define BCMA_CHIP_ID_BCM4748 0x4748 +#define BCMA_CHIP_ID_BCM4749 0x4749 +#define BCMA_CHIP_ID_BCM5356 0x5356 +#define BCMA_CHIP_ID_BCM5357 0x5357 +#define BCMA_CHIP_ID_BCM53572 53572 + struct bcma_device { struct bcma_bus *bus; struct bcma_device_id id; @@ -215,6 +253,7 @@ struct bcma_bus { struct bcma_drv_cc drv_cc; struct bcma_drv_pci drv_pci; struct bcma_drv_mips drv_mips; + struct bcma_drv_gmac_cmn drv_gmac_cmn; /* We decided to share SPROM struct with SSB as long as we do not need * any hacks for BCMA. This simplifies drivers code. */ diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index 8bbfe31fbac..3c80885fa82 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -24,7 +24,7 @@ #define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */ #define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */ #define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */ -#define BCMA_CC_FLASHT_NFLASH 0x00000200 +#define BCMA_CC_FLASHT_NFLASH 0x00000200 /* NAND flash */ #define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */ #define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */ #define BCMA_PLLTYPE_NONE 0x00000000 @@ -45,6 +45,7 @@ #define BCMA_CC_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */ #define BCMA_CC_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */ #define BCMA_CC_CAP_SPROM 0x40000000 /* SPROM present */ +#define BCMA_CC_CAP_NFLASH 0x80000000 /* NAND flash present (rev >= 35 or BCM4706?) */ #define BCMA_CC_CORECTL 0x0008 #define BCMA_CC_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */ #define BCMA_CC_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ @@ -88,6 +89,11 @@ #define BCMA_CC_CHIPST_4313_OTP_PRESENT 2 #define BCMA_CC_CHIPST_4331_SPROM_PRESENT 2 #define BCMA_CC_CHIPST_4331_OTP_PRESENT 4 +#define BCMA_CC_CHIPST_4706_PKG_OPTION BIT(0) /* 0: full-featured package 1: low-cost package */ +#define BCMA_CC_CHIPST_4706_SFLASH_PRESENT BIT(1) /* 0: parallel, 1: serial flash is present */ +#define BCMA_CC_CHIPST_4706_SFLASH_TYPE BIT(2) /* 0: 8b-p/ST-s flash, 1: 16b-p/Atmal-s flash */ +#define BCMA_CC_CHIPST_4706_MIPS_BENDIAN BIT(3) /* 0: little, 1: big endian */ +#define BCMA_CC_CHIPST_4706_PCIE1_DISABLE BIT(5) /* PCIE1 enable strap pin */ #define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */ #define BCMA_CC_JCMD_START 0x80000000 #define BCMA_CC_JCMD_BUSY 0x80000000 @@ -117,10 +123,58 @@ #define BCMA_CC_JCTL_EXT_EN 2 /* Enable external targets */ #define BCMA_CC_JCTL_EN 1 /* Enable Jtag master */ #define BCMA_CC_FLASHCTL 0x0040 +/* Start/busy bit in flashcontrol */ +#define BCMA_CC_FLASHCTL_OPCODE 0x000000ff +#define BCMA_CC_FLASHCTL_ACTION 0x00000700 +#define BCMA_CC_FLASHCTL_CS_ACTIVE 0x00001000 /* Chip Select Active, rev >= 20 */ #define BCMA_CC_FLASHCTL_START 0x80000000 #define BCMA_CC_FLASHCTL_BUSY BCMA_CC_FLASHCTL_START +/* Flashcontrol action + opcodes for ST flashes */ +#define BCMA_CC_FLASHCTL_ST_WREN 0x0006 /* Write Enable */ +#define BCMA_CC_FLASHCTL_ST_WRDIS 0x0004 /* Write Disable */ +#define BCMA_CC_FLASHCTL_ST_RDSR 0x0105 /* Read Status Register */ +#define BCMA_CC_FLASHCTL_ST_WRSR 0x0101 /* Write Status Register */ +#define BCMA_CC_FLASHCTL_ST_READ 0x0303 /* Read Data Bytes */ +#define BCMA_CC_FLASHCTL_ST_PP 0x0302 /* Page Program */ +#define BCMA_CC_FLASHCTL_ST_SE 0x02d8 /* Sector Erase */ +#define BCMA_CC_FLASHCTL_ST_BE 0x00c7 /* Bulk Erase */ +#define BCMA_CC_FLASHCTL_ST_DP 0x00b9 /* Deep Power-down */ +#define BCMA_CC_FLASHCTL_ST_RES 0x03ab /* Read Electronic Signature */ +#define BCMA_CC_FLASHCTL_ST_CSA 0x1000 /* Keep chip select asserted */ +#define BCMA_CC_FLASHCTL_ST_SSE 0x0220 /* Sub-sector Erase */ +/* Flashcontrol action + opcodes for Atmel flashes */ +#define BCMA_CC_FLASHCTL_AT_READ 0x07e8 +#define BCMA_CC_FLASHCTL_AT_PAGE_READ 0x07d2 +#define BCMA_CC_FLASHCTL_AT_STATUS 0x01d7 +#define BCMA_CC_FLASHCTL_AT_BUF1_WRITE 0x0384 +#define BCMA_CC_FLASHCTL_AT_BUF2_WRITE 0x0387 +#define BCMA_CC_FLASHCTL_AT_BUF1_ERASE_PROGRAM 0x0283 +#define BCMA_CC_FLASHCTL_AT_BUF2_ERASE_PROGRAM 0x0286 +#define BCMA_CC_FLASHCTL_AT_BUF1_PROGRAM 0x0288 +#define BCMA_CC_FLASHCTL_AT_BUF2_PROGRAM 0x0289 +#define BCMA_CC_FLASHCTL_AT_PAGE_ERASE 0x0281 +#define BCMA_CC_FLASHCTL_AT_BLOCK_ERASE 0x0250 +#define BCMA_CC_FLASHCTL_AT_BUF1_WRITE_ERASE_PROGRAM 0x0382 +#define BCMA_CC_FLASHCTL_AT_BUF2_WRITE_ERASE_PROGRAM 0x0385 +#define BCMA_CC_FLASHCTL_AT_BUF1_LOAD 0x0253 +#define BCMA_CC_FLASHCTL_AT_BUF2_LOAD 0x0255 +#define BCMA_CC_FLASHCTL_AT_BUF1_COMPARE 0x0260 +#define BCMA_CC_FLASHCTL_AT_BUF2_COMPARE 0x0261 +#define BCMA_CC_FLASHCTL_AT_BUF1_REPROGRAM 0x0258 +#define BCMA_CC_FLASHCTL_AT_BUF2_REPROGRAM 0x0259 #define BCMA_CC_FLASHADDR 0x0044 #define BCMA_CC_FLASHDATA 0x0048 +/* Status register bits for ST flashes */ +#define BCMA_CC_FLASHDATA_ST_WIP 0x01 /* Write In Progress */ +#define BCMA_CC_FLASHDATA_ST_WEL 0x02 /* Write Enable Latch */ +#define BCMA_CC_FLASHDATA_ST_BP_MASK 0x1c /* Block Protect */ +#define BCMA_CC_FLASHDATA_ST_BP_SHIFT 2 +#define BCMA_CC_FLASHDATA_ST_SRWD 0x80 /* Status Register Write Disable */ +/* Status register bits for Atmel flashes */ +#define BCMA_CC_FLASHDATA_AT_READY 0x80 +#define BCMA_CC_FLASHDATA_AT_MISMATCH 0x40 +#define BCMA_CC_FLASHDATA_AT_ID_MASK 0x38 +#define BCMA_CC_FLASHDATA_AT_ID_SHIFT 3 #define BCMA_CC_BCAST_ADDR 0x0050 #define BCMA_CC_BCAST_DATA 0x0054 #define BCMA_CC_GPIOPULLUP 0x0058 /* Rev >= 20 only */ @@ -280,6 +334,15 @@ /* 4706 PMU */ #define BCMA_CC_PMU4706_MAINPLL_PLL0 0 +#define BCMA_CC_PMU6_4706_PROCPLL_OFF 4 /* The CPU PLL */ +#define BCMA_CC_PMU6_4706_PROC_P2DIV_MASK 0x000f0000 +#define BCMA_CC_PMU6_4706_PROC_P2DIV_SHIFT 16 +#define BCMA_CC_PMU6_4706_PROC_P1DIV_MASK 0x0000f000 +#define BCMA_CC_PMU6_4706_PROC_P1DIV_SHIFT 12 +#define BCMA_CC_PMU6_4706_PROC_NDIV_INT_MASK 0x00000ff8 +#define BCMA_CC_PMU6_4706_PROC_NDIV_INT_SHIFT 3 +#define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_MASK 0x00000007 +#define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_SHIFT 0 /* ALP clock on pre-PMU chips */ #define BCMA_CC_PMU_ALP_CLOCK 20000000 @@ -308,6 +371,19 @@ #define BCMA_CC_PPL_PCHI_OFF 5 #define BCMA_CC_PPL_PCHI_MASK 0x0000003f +#define BCMA_CC_PMU_PLL_CTL0 0 +#define BCMA_CC_PMU_PLL_CTL1 1 +#define BCMA_CC_PMU_PLL_CTL2 2 +#define BCMA_CC_PMU_PLL_CTL3 3 +#define BCMA_CC_PMU_PLL_CTL4 4 +#define BCMA_CC_PMU_PLL_CTL5 5 + +#define BCMA_CC_PMU1_PLL0_PC0_P1DIV_MASK 0x00f00000 +#define BCMA_CC_PMU1_PLL0_PC0_P1DIV_SHIFT 20 + +#define BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_MASK 0x1ff00000 +#define BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT 20 + /* BCM4331 ChipControl numbers. */ #define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */ #define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */ @@ -321,9 +397,18 @@ #define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN BIT(9) /* override core control on pipe_AuxPowerDown */ #define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN BIT(10) /* pcie_auxclkenable */ #define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */ +#define BCMA_CHIPCTL_4331_EXTPA_EN2 BIT(12) /* 0 ext pa disable, 1 ext pa enabled */ #define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */ #define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */ +/* 43224 chip-specific ChipControl register bits */ +#define BCMA_CCTRL_43224_GPIO_TOGGLE 0x8000 /* gpio[3:0] pins as btcoex or s/w gpio */ +#define BCMA_CCTRL_43224A0_12MA_LED_DRIVE 0x00F000F0 /* 12 mA drive strength */ +#define BCMA_CCTRL_43224B0_12MA_LED_DRIVE 0xF0 /* 12 mA drive strength for later 43224s */ + +/* 4313 Chip specific ChipControl register bits */ +#define BCMA_CCTRL_4313_12MA_LED_DRIVE 0x00000007 /* 12 mA drive strengh for later 4313 */ + /* Data for the PMU, if available. * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) */ @@ -411,5 +496,6 @@ extern void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, u32 set); extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, u32 set); +extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid); #endif /* LINUX_BCMA_DRIVER_CC_H_ */ diff --git a/include/linux/bcma/bcma_driver_gmac_cmn.h b/include/linux/bcma/bcma_driver_gmac_cmn.h new file mode 100644 index 00000000000..def894b83b0 --- /dev/null +++ b/include/linux/bcma/bcma_driver_gmac_cmn.h @@ -0,0 +1,100 @@ +#ifndef LINUX_BCMA_DRIVER_GMAC_CMN_H_ +#define LINUX_BCMA_DRIVER_GMAC_CMN_H_ + +#include <linux/types.h> + +#define BCMA_GMAC_CMN_STAG0 0x000 +#define BCMA_GMAC_CMN_STAG1 0x004 +#define BCMA_GMAC_CMN_STAG2 0x008 +#define BCMA_GMAC_CMN_STAG3 0x00C +#define BCMA_GMAC_CMN_PARSER_CTL 0x020 +#define BCMA_GMAC_CMN_MIB_MAX_LEN 0x024 +#define BCMA_GMAC_CMN_PHY_ACCESS 0x100 +#define BCMA_GMAC_CMN_PA_DATA_MASK 0x0000ffff +#define BCMA_GMAC_CMN_PA_ADDR_MASK 0x001f0000 +#define BCMA_GMAC_CMN_PA_ADDR_SHIFT 16 +#define BCMA_GMAC_CMN_PA_REG_MASK 0x1f000000 +#define BCMA_GMAC_CMN_PA_REG_SHIFT 24 +#define BCMA_GMAC_CMN_PA_WRITE 0x20000000 +#define BCMA_GMAC_CMN_PA_START 0x40000000 +#define BCMA_GMAC_CMN_PHY_CTL 0x104 +#define BCMA_GMAC_CMN_PC_EPA_MASK 0x0000001f +#define BCMA_GMAC_CMN_PC_MCT_MASK 0x007f0000 +#define BCMA_GMAC_CMN_PC_MCT_SHIFT 16 +#define BCMA_GMAC_CMN_PC_MTE 0x00800000 +#define BCMA_GMAC_CMN_GMAC0_RGMII_CTL 0x110 +#define BCMA_GMAC_CMN_CFP_ACCESS 0x200 +#define BCMA_GMAC_CMN_CFP_TCAM_DATA0 0x210 +#define BCMA_GMAC_CMN_CFP_TCAM_DATA1 0x214 +#define BCMA_GMAC_CMN_CFP_TCAM_DATA2 0x218 +#define BCMA_GMAC_CMN_CFP_TCAM_DATA3 0x21C +#define BCMA_GMAC_CMN_CFP_TCAM_DATA4 0x220 +#define BCMA_GMAC_CMN_CFP_TCAM_DATA5 0x224 +#define BCMA_GMAC_CMN_CFP_TCAM_DATA6 0x228 +#define BCMA_GMAC_CMN_CFP_TCAM_DATA7 0x22C +#define BCMA_GMAC_CMN_CFP_TCAM_MASK0 0x230 +#define BCMA_GMAC_CMN_CFP_TCAM_MASK1 0x234 +#define BCMA_GMAC_CMN_CFP_TCAM_MASK2 0x238 +#define BCMA_GMAC_CMN_CFP_TCAM_MASK3 0x23C +#define BCMA_GMAC_CMN_CFP_TCAM_MASK4 0x240 +#define BCMA_GMAC_CMN_CFP_TCAM_MASK5 0x244 +#define BCMA_GMAC_CMN_CFP_TCAM_MASK6 0x248 +#define BCMA_GMAC_CMN_CFP_TCAM_MASK7 0x24C +#define BCMA_GMAC_CMN_CFP_ACTION_DATA 0x250 +#define BCMA_GMAC_CMN_TCAM_BIST_CTL 0x2A0 +#define BCMA_GMAC_CMN_TCAM_BIST_STATUS 0x2A4 +#define BCMA_GMAC_CMN_TCAM_CMP_STATUS 0x2A8 +#define BCMA_GMAC_CMN_TCAM_DISABLE 0x2AC +#define BCMA_GMAC_CMN_TCAM_TEST_CTL 0x2F0 +#define BCMA_GMAC_CMN_UDF_0_A3_A0 0x300 +#define BCMA_GMAC_CMN_UDF_0_A7_A4 0x304 +#define BCMA_GMAC_CMN_UDF_0_A8 0x308 +#define BCMA_GMAC_CMN_UDF_1_A3_A0 0x310 +#define BCMA_GMAC_CMN_UDF_1_A7_A4 0x314 +#define BCMA_GMAC_CMN_UDF_1_A8 0x318 +#define BCMA_GMAC_CMN_UDF_2_A3_A0 0x320 +#define BCMA_GMAC_CMN_UDF_2_A7_A4 0x324 +#define BCMA_GMAC_CMN_UDF_2_A8 0x328 +#define BCMA_GMAC_CMN_UDF_0_B3_B0 0x330 +#define BCMA_GMAC_CMN_UDF_0_B7_B4 0x334 +#define BCMA_GMAC_CMN_UDF_0_B8 0x338 +#define BCMA_GMAC_CMN_UDF_1_B3_B0 0x340 +#define BCMA_GMAC_CMN_UDF_1_B7_B4 0x344 +#define BCMA_GMAC_CMN_UDF_1_B8 0x348 +#define BCMA_GMAC_CMN_UDF_2_B3_B0 0x350 +#define BCMA_GMAC_CMN_UDF_2_B7_B4 0x354 +#define BCMA_GMAC_CMN_UDF_2_B8 0x358 +#define BCMA_GMAC_CMN_UDF_0_C3_C0 0x360 +#define BCMA_GMAC_CMN_UDF_0_C7_C4 0x364 +#define BCMA_GMAC_CMN_UDF_0_C8 0x368 +#define BCMA_GMAC_CMN_UDF_1_C3_C0 0x370 +#define BCMA_GMAC_CMN_UDF_1_C7_C4 0x374 +#define BCMA_GMAC_CMN_UDF_1_C8 0x378 +#define BCMA_GMAC_CMN_UDF_2_C3_C0 0x380 +#define BCMA_GMAC_CMN_UDF_2_C7_C4 0x384 +#define BCMA_GMAC_CMN_UDF_2_C8 0x388 +#define BCMA_GMAC_CMN_UDF_0_D3_D0 0x390 +#define BCMA_GMAC_CMN_UDF_0_D7_D4 0x394 +#define BCMA_GMAC_CMN_UDF_0_D11_D8 0x394 + +struct bcma_drv_gmac_cmn { + struct bcma_device *core; + + /* Drivers accessing BCMA_GMAC_CMN_PHY_ACCESS and + * BCMA_GMAC_CMN_PHY_CTL need to take that mutex first. */ + struct mutex phy_mutex; +}; + +/* Register access */ +#define gmac_cmn_read16(gc, offset) bcma_read16((gc)->core, offset) +#define gmac_cmn_read32(gc, offset) bcma_read32((gc)->core, offset) +#define gmac_cmn_write16(gc, offset, val) bcma_write16((gc)->core, offset, val) +#define gmac_cmn_write32(gc, offset, val) bcma_write32((gc)->core, offset, val) + +#ifdef CONFIG_BCMA_DRIVER_GMAC_CMN +extern void __devinit bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc); +#else +static inline void bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc) { } +#endif + +#endif /* LINUX_BCMA_DRIVER_GMAC_CMN_H_ */ diff --git a/include/linux/can.h b/include/linux/can.h index 9a19bcb3eea..018055efc03 100644 --- a/include/linux/can.h +++ b/include/linux/can.h @@ -21,7 +21,7 @@ /* special address description flags for the CAN_ID */ #define CAN_EFF_FLAG 0x80000000U /* EFF/SFF is set in the MSB */ #define CAN_RTR_FLAG 0x40000000U /* remote transmission request */ -#define CAN_ERR_FLAG 0x20000000U /* error frame */ +#define CAN_ERR_FLAG 0x20000000U /* error message frame */ /* valid bits in CAN ID for frame formats */ #define CAN_SFF_MASK 0x000007FFU /* standard frame format (SFF) */ @@ -32,32 +32,84 @@ * Controller Area Network Identifier structure * * bit 0-28 : CAN identifier (11/29 bit) - * bit 29 : error frame flag (0 = data frame, 1 = error frame) + * bit 29 : error message frame flag (0 = data frame, 1 = error message) * bit 30 : remote transmission request flag (1 = rtr frame) * bit 31 : frame format flag (0 = standard 11 bit, 1 = extended 29 bit) */ typedef __u32 canid_t; +#define CAN_SFF_ID_BITS 11 +#define CAN_EFF_ID_BITS 29 + /* - * Controller Area Network Error Frame Mask structure + * Controller Area Network Error Message Frame Mask structure * * bit 0-28 : error class mask (see include/linux/can/error.h) * bit 29-31 : set to zero */ typedef __u32 can_err_mask_t; +/* CAN payload length and DLC definitions according to ISO 11898-1 */ +#define CAN_MAX_DLC 8 +#define CAN_MAX_DLEN 8 + +/* CAN FD payload length and DLC definitions according to ISO 11898-7 */ +#define CANFD_MAX_DLC 15 +#define CANFD_MAX_DLEN 64 + /** * struct can_frame - basic CAN frame structure - * @can_id: the CAN ID of the frame and CAN_*_FLAG flags, see above. - * @can_dlc: the data length field of the CAN frame - * @data: the CAN frame payload. + * @can_id: CAN ID of the frame and CAN_*_FLAG flags, see canid_t definition + * @can_dlc: frame payload length in byte (0 .. 8) aka data length code + * N.B. the DLC field from ISO 11898-1 Chapter 8.4.2.3 has a 1:1 + * mapping of the 'data length code' to the real payload length + * @data: CAN frame payload (up to 8 byte) */ struct can_frame { canid_t can_id; /* 32 bit CAN_ID + EFF/RTR/ERR flags */ - __u8 can_dlc; /* data length code: 0 .. 8 */ - __u8 data[8] __attribute__((aligned(8))); + __u8 can_dlc; /* frame payload length in byte (0 .. CAN_MAX_DLEN) */ + __u8 data[CAN_MAX_DLEN] __attribute__((aligned(8))); +}; + +/* + * defined bits for canfd_frame.flags + * + * As the default for CAN FD should be to support the high data rate in the + * payload section of the frame (HDR) and to support up to 64 byte in the + * data section (EDL) the bits are only set in the non-default case. + * Btw. as long as there's no real implementation for CAN FD network driver + * these bits are only preliminary. + * + * RX: NOHDR/NOEDL - info about received CAN FD frame + * ESI - bit from originating CAN controller + * TX: NOHDR/NOEDL - control per-frame settings if supported by CAN controller + * ESI - bit is set by local CAN controller + */ +#define CANFD_NOHDR 0x01 /* frame without high data rate */ +#define CANFD_NOEDL 0x02 /* frame without extended data length */ +#define CANFD_ESI 0x04 /* error state indicator */ + +/** + * struct canfd_frame - CAN flexible data rate frame structure + * @can_id: CAN ID of the frame and CAN_*_FLAG flags, see canid_t definition + * @len: frame payload length in byte (0 .. CANFD_MAX_DLEN) + * @flags: additional flags for CAN FD + * @__res0: reserved / padding + * @__res1: reserved / padding + * @data: CAN FD frame payload (up to CANFD_MAX_DLEN byte) + */ +struct canfd_frame { + canid_t can_id; /* 32 bit CAN_ID + EFF/RTR/ERR flags */ + __u8 len; /* frame payload length in byte */ + __u8 flags; /* additional flags for CAN FD */ + __u8 __res0; /* reserved / padding */ + __u8 __res1; /* reserved / padding */ + __u8 data[CANFD_MAX_DLEN] __attribute__((aligned(8))); }; +#define CAN_MTU (sizeof(struct can_frame)) +#define CANFD_MTU (sizeof(struct canfd_frame)) + /* particular protocols of the protocol family PF_CAN */ #define CAN_RAW 1 /* RAW sockets */ #define CAN_BCM 2 /* Broadcast Manager */ @@ -97,7 +149,7 @@ struct sockaddr_can { * <received_can_id> & mask == can_id & mask * * The filter can be inverted (CAN_INV_FILTER bit set in can_id) or it can - * filter for error frames (CAN_ERR_FLAG bit set in mask). + * filter for error message frames (CAN_ERR_FLAG bit set in mask). */ struct can_filter { canid_t can_id; diff --git a/include/linux/can/core.h b/include/linux/can/core.h index 0ccc1cd28b9..78c6c52073a 100644 --- a/include/linux/can/core.h +++ b/include/linux/can/core.h @@ -17,10 +17,10 @@ #include <linux/skbuff.h> #include <linux/netdevice.h> -#define CAN_VERSION "20090105" +#define CAN_VERSION "20120528" /* increment this number each time you change some user-space interface */ -#define CAN_ABI_VERSION "8" +#define CAN_ABI_VERSION "9" #define CAN_VERSION_STRING "rev " CAN_VERSION " abi " CAN_ABI_VERSION diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h index 5d2efe7e3f1..2b2fc345afc 100644 --- a/include/linux/can/dev.h +++ b/include/linux/can/dev.h @@ -33,7 +33,7 @@ struct can_priv { struct can_device_stats can_stats; struct can_bittiming bittiming; - struct can_bittiming_const *bittiming_const; + const struct can_bittiming_const *bittiming_const; struct can_clock clock; enum can_state state; @@ -61,23 +61,40 @@ struct can_priv { * To be used in the CAN netdriver receive path to ensure conformance with * ISO 11898-1 Chapter 8.4.2.3 (DLC field) */ -#define get_can_dlc(i) (min_t(__u8, (i), 8)) +#define get_can_dlc(i) (min_t(__u8, (i), CAN_MAX_DLC)) +#define get_canfd_dlc(i) (min_t(__u8, (i), CANFD_MAX_DLC)) /* Drop a given socketbuffer if it does not contain a valid CAN frame. */ static inline int can_dropped_invalid_skb(struct net_device *dev, struct sk_buff *skb) { - const struct can_frame *cf = (struct can_frame *)skb->data; - - if (unlikely(skb->len != sizeof(*cf) || cf->can_dlc > 8)) { - kfree_skb(skb); - dev->stats.tx_dropped++; - return 1; - } + const struct canfd_frame *cfd = (struct canfd_frame *)skb->data; + + if (skb->protocol == htons(ETH_P_CAN)) { + if (unlikely(skb->len != CAN_MTU || + cfd->len > CAN_MAX_DLEN)) + goto inval_skb; + } else if (skb->protocol == htons(ETH_P_CANFD)) { + if (unlikely(skb->len != CANFD_MTU || + cfd->len > CANFD_MAX_DLEN)) + goto inval_skb; + } else + goto inval_skb; return 0; + +inval_skb: + kfree_skb(skb); + dev->stats.tx_dropped++; + return 1; } +/* get data length from can_dlc with sanitized can_dlc */ +u8 can_dlc2len(u8 can_dlc); + +/* map the sanitized data length to an appropriate data length code */ +u8 can_len2dlc(u8 len); + struct net_device *alloc_candev(int sizeof_priv, unsigned int echo_skb_max); void free_candev(struct net_device *dev); diff --git a/include/linux/can/error.h b/include/linux/can/error.h index 63e855ea6b8..7b7148bded7 100644 --- a/include/linux/can/error.h +++ b/include/linux/can/error.h @@ -1,7 +1,7 @@ /* * linux/can/error.h * - * Definitions of the CAN error frame to be filtered and passed to the user. + * Definitions of the CAN error messages to be filtered and passed to the user. * * Author: Oliver Hartkopp <oliver.hartkopp@volkswagen.de> * Copyright (c) 2002-2007 Volkswagen Group Electronic Research @@ -12,7 +12,7 @@ #ifndef CAN_ERROR_H #define CAN_ERROR_H -#define CAN_ERR_DLC 8 /* dlc for error frames */ +#define CAN_ERR_DLC 8 /* dlc for error message frames */ /* error class (mask) in can_id */ #define CAN_ERR_TX_TIMEOUT 0x00000001U /* TX timeout (by netdevice driver) */ diff --git a/include/linux/can/raw.h b/include/linux/can/raw.h index 781f3a3701b..a814062b071 100644 --- a/include/linux/can/raw.h +++ b/include/linux/can/raw.h @@ -23,7 +23,8 @@ enum { CAN_RAW_FILTER = 1, /* set 0 .. n can_filter(s) */ CAN_RAW_ERR_FILTER, /* set filter for error frames */ CAN_RAW_LOOPBACK, /* local loopback (default:on) */ - CAN_RAW_RECV_OWN_MSGS /* receive my own msgs (default:off) */ + CAN_RAW_RECV_OWN_MSGS, /* receive my own msgs (default:off) */ + CAN_RAW_FD_FRAMES, /* allow CAN FD frames (default:off) */ }; #endif diff --git a/include/linux/cpu_rmap.h b/include/linux/cpu_rmap.h index 473771a528c..ac3bbb5b950 100644 --- a/include/linux/cpu_rmap.h +++ b/include/linux/cpu_rmap.h @@ -1,3 +1,6 @@ +#ifndef __LINUX_CPU_RMAP_H +#define __LINUX_CPU_RMAP_H + /* * cpu_rmap.c: CPU affinity reverse-map support * Copyright 2011 Solarflare Communications Inc. @@ -71,3 +74,4 @@ extern void free_irq_cpu_rmap(struct cpu_rmap *rmap); extern int irq_cpu_rmap_add(struct cpu_rmap *rmap, int irq); #endif +#endif /* __LINUX_CPU_RMAP_H */ diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h index 3d406e0ede6..d426336d92d 100644 --- a/include/linux/etherdevice.h +++ b/include/linux/etherdevice.h @@ -124,17 +124,30 @@ static inline bool is_valid_ether_addr(const u8 *addr) } /** - * random_ether_addr - Generate software assigned random Ethernet address + * eth_random_addr - Generate software assigned random Ethernet address * @addr: Pointer to a six-byte array containing the Ethernet address * * Generate a random Ethernet address (MAC) that is not multicast * and has the local assigned bit set. */ -static inline void random_ether_addr(u8 *addr) +static inline void eth_random_addr(u8 *addr) { - get_random_bytes (addr, ETH_ALEN); - addr [0] &= 0xfe; /* clear multicast bit */ - addr [0] |= 0x02; /* set local assignment bit (IEEE802) */ + get_random_bytes(addr, ETH_ALEN); + addr[0] &= 0xfe; /* clear multicast bit */ + addr[0] |= 0x02; /* set local assignment bit (IEEE802) */ +} + +#define random_ether_addr(addr) eth_random_addr(addr) + +/** + * eth_broadcast_addr - Assign broadcast address + * @addr: Pointer to a six-byte array containing the Ethernet address + * + * Assign the broadcast address to the given address array. + */ +static inline void eth_broadcast_addr(u8 *addr) +{ + memset(addr, 0xff, ETH_ALEN); } /** @@ -149,7 +162,7 @@ static inline void random_ether_addr(u8 *addr) static inline void eth_hw_addr_random(struct net_device *dev) { dev->addr_assign_type |= NET_ADDR_RANDOM; - random_ether_addr(dev->dev_addr); + eth_random_addr(dev->dev_addr); } /** diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index e17fa714058..21eff418091 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -137,6 +137,35 @@ struct ethtool_eeprom { }; /** + * struct ethtool_eee - Energy Efficient Ethernet information + * @cmd: ETHTOOL_{G,S}EEE + * @supported: Mask of %SUPPORTED_* flags for the speed/duplex combinations + * for which there is EEE support. + * @advertised: Mask of %ADVERTISED_* flags for the speed/duplex combinations + * advertised as eee capable. + * @lp_advertised: Mask of %ADVERTISED_* flags for the speed/duplex + * combinations advertised by the link partner as eee capable. + * @eee_active: Result of the eee auto negotiation. + * @eee_enabled: EEE configured mode (enabled/disabled). + * @tx_lpi_enabled: Whether the interface should assert its tx lpi, given + * that eee was negotiated. + * @tx_lpi_timer: Time in microseconds the interface delays prior to asserting + * its tx lpi (after reaching 'idle' state). Effective only when eee + * was negotiated and tx_lpi_enabled was set. + */ +struct ethtool_eee { + __u32 cmd; + __u32 supported; + __u32 advertised; + __u32 lp_advertised; + __u32 eee_active; + __u32 eee_enabled; + __u32 tx_lpi_enabled; + __u32 tx_lpi_timer; + __u32 reserved[2]; +}; + +/** * struct ethtool_modinfo - plugin module eeprom information * @cmd: %ETHTOOL_GMODULEINFO * @type: Standard the module information conforms to %ETH_MODULE_SFF_xxxx @@ -945,6 +974,8 @@ static inline u32 ethtool_rxfh_indir_default(u32 index, u32 n_rx_rings) * @get_module_info: Get the size and type of the eeprom contained within * a plug-in module. * @get_module_eeprom: Get the eeprom information from the plug-in module + * @get_eee: Get Energy-Efficient (EEE) supported and status. + * @set_eee: Set EEE status (enable/disable) as well as LPI timers. * * All operations are optional (i.e. the function pointer may be set * to %NULL) and callers must take this into account. Callers must @@ -1011,6 +1042,8 @@ struct ethtool_ops { struct ethtool_modinfo *); int (*get_module_eeprom)(struct net_device *, struct ethtool_eeprom *, u8 *); + int (*get_eee)(struct net_device *, struct ethtool_eee *); + int (*set_eee)(struct net_device *, struct ethtool_eee *); }; @@ -1089,6 +1122,8 @@ struct ethtool_ops { #define ETHTOOL_GET_TS_INFO 0x00000041 /* Get time stamping and PHC info */ #define ETHTOOL_GMODULEINFO 0x00000042 /* Get plug-in module information */ #define ETHTOOL_GMODULEEEPROM 0x00000043 /* Get plug-in module eeprom */ +#define ETHTOOL_GEEE 0x00000044 /* Get EEE settings */ +#define ETHTOOL_SEEE 0x00000045 /* Set EEE settings */ /* compatibility with older code */ #define SPARC_ETH_GSET ETHTOOL_GSET @@ -1118,6 +1153,10 @@ struct ethtool_ops { #define SUPPORTED_10000baseR_FEC (1 << 20) #define SUPPORTED_20000baseMLD2_Full (1 << 21) #define SUPPORTED_20000baseKR2_Full (1 << 22) +#define SUPPORTED_40000baseKR4_Full (1 << 23) +#define SUPPORTED_40000baseCR4_Full (1 << 24) +#define SUPPORTED_40000baseSR4_Full (1 << 25) +#define SUPPORTED_40000baseLR4_Full (1 << 26) /* Indicates what features are advertised by the interface. */ #define ADVERTISED_10baseT_Half (1 << 0) @@ -1143,6 +1182,10 @@ struct ethtool_ops { #define ADVERTISED_10000baseR_FEC (1 << 20) #define ADVERTISED_20000baseMLD2_Full (1 << 21) #define ADVERTISED_20000baseKR2_Full (1 << 22) +#define ADVERTISED_40000baseKR4_Full (1 << 23) +#define ADVERTISED_40000baseCR4_Full (1 << 24) +#define ADVERTISED_40000baseSR4_Full (1 << 25) +#define ADVERTISED_40000baseLR4_Full (1 << 26) /* The following are all involved in forcing a particular link * mode for the device for setting things. When getting the diff --git a/include/linux/genetlink.h b/include/linux/genetlink.h index 7a114016ac7..5ab61c1eb6b 100644 --- a/include/linux/genetlink.h +++ b/include/linux/genetlink.h @@ -85,7 +85,7 @@ enum { /* All generic netlink requests are serialized by a global lock. */ extern void genl_lock(void); extern void genl_unlock(void); -#ifdef CONFIG_PROVE_LOCKING +#ifdef CONFIG_LOCKDEP extern int lockdep_genl_is_held(void); #endif diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index ce9af891851..e02fc682bb6 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -47,6 +47,7 @@ #define IEEE80211_FCTL_MOREDATA 0x2000 #define IEEE80211_FCTL_PROTECTED 0x4000 #define IEEE80211_FCTL_ORDER 0x8000 +#define IEEE80211_FCTL_CTL_EXT 0x0f00 #define IEEE80211_SCTL_FRAG 0x000F #define IEEE80211_SCTL_SEQ 0xFFF0 @@ -54,6 +55,7 @@ #define IEEE80211_FTYPE_MGMT 0x0000 #define IEEE80211_FTYPE_CTL 0x0004 #define IEEE80211_FTYPE_DATA 0x0008 +#define IEEE80211_FTYPE_EXT 0x000c /* management */ #define IEEE80211_STYPE_ASSOC_REQ 0x0000 @@ -70,6 +72,7 @@ #define IEEE80211_STYPE_ACTION 0x00D0 /* control */ +#define IEEE80211_STYPE_CTL_EXT 0x0060 #define IEEE80211_STYPE_BACK_REQ 0x0080 #define IEEE80211_STYPE_BACK 0x0090 #define IEEE80211_STYPE_PSPOLL 0x00A0 @@ -97,6 +100,18 @@ #define IEEE80211_STYPE_QOS_CFPOLL 0x00E0 #define IEEE80211_STYPE_QOS_CFACKPOLL 0x00F0 +/* extension, added by 802.11ad */ +#define IEEE80211_STYPE_DMG_BEACON 0x0000 + +/* control extension - for IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTL_EXT */ +#define IEEE80211_CTL_EXT_POLL 0x2000 +#define IEEE80211_CTL_EXT_SPR 0x3000 +#define IEEE80211_CTL_EXT_GRANT 0x4000 +#define IEEE80211_CTL_EXT_DMG_CTS 0x5000 +#define IEEE80211_CTL_EXT_DMG_DTS 0x6000 +#define IEEE80211_CTL_EXT_SSW 0x8000 +#define IEEE80211_CTL_EXT_SSW_FBACK 0x9000 +#define IEEE80211_CTL_EXT_SSW_ACK 0xa000 /* miscellaneous IEEE 802.11 constants */ #define IEEE80211_MAX_FRAG_THRESHOLD 2352 @@ -568,6 +583,26 @@ struct ieee80211s_hdr { #define MESH_FLAGS_PS_DEEP 0x4 /** + * enum ieee80211_preq_flags - mesh PREQ element flags + * + * @IEEE80211_PREQ_PROACTIVE_PREP_FLAG: proactive PREP subfield + */ +enum ieee80211_preq_flags { + IEEE80211_PREQ_PROACTIVE_PREP_FLAG = 1<<2, +}; + +/** + * enum ieee80211_preq_target_flags - mesh PREQ element per target flags + * + * @IEEE80211_PREQ_TO_FLAG: target only subfield + * @IEEE80211_PREQ_USN_FLAG: unknown target HWMP sequence number subfield + */ +enum ieee80211_preq_target_flags { + IEEE80211_PREQ_TO_FLAG = 1<<0, + IEEE80211_PREQ_USN_FLAG = 1<<2, +}; + +/** * struct ieee80211_quiet_ie * * This structure refers to "Quiet information element" @@ -1072,6 +1107,73 @@ struct ieee80211_ht_operation { #define WLAN_HT_SMPS_CONTROL_STATIC 1 #define WLAN_HT_SMPS_CONTROL_DYNAMIC 3 +#define VHT_MCS_SUPPORTED_SET_SIZE 8 + +struct ieee80211_vht_capabilities { + __le32 vht_capabilities_info; + u8 vht_supported_mcs_set[VHT_MCS_SUPPORTED_SET_SIZE]; +} __packed; + +struct ieee80211_vht_operation { + u8 vht_op_info_chwidth; + u8 vht_op_info_chan_center_freq_seg1_idx; + u8 vht_op_info_chan_center_freq_seg2_idx; + __le16 vht_basic_mcs_set; +} __packed; + +/** + * struct ieee80211_vht_mcs_info - VHT MCS information + * @rx_mcs_map: RX MCS map 2 bits for each stream, total 8 streams + * @rx_highest: Indicates highest long GI VHT PPDU data rate + * STA can receive. Rate expressed in units of 1 Mbps. + * If this field is 0 this value should not be used to + * consider the highest RX data rate supported. + * @tx_mcs_map: TX MCS map 2 bits for each stream, total 8 streams + * @tx_highest: Indicates highest long GI VHT PPDU data rate + * STA can transmit. Rate expressed in units of 1 Mbps. + * If this field is 0 this value should not be used to + * consider the highest TX data rate supported. + */ +struct ieee80211_vht_mcs_info { + __le16 rx_mcs_map; + __le16 rx_highest; + __le16 tx_mcs_map; + __le16 tx_highest; +} __packed; + +#define IEEE80211_VHT_MCS_ZERO_TO_SEVEN_SUPPORT 0 +#define IEEE80211_VHT_MCS_ZERO_TO_EIGHT_SUPPORT 1 +#define IEEE80211_VHT_MCS_ZERO_TO_NINE_SUPPORT 2 +#define IEEE80211_VHT_MCS_NOT_SUPPORTED 3 + +/* 802.11ac VHT Capabilities */ +#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895 0x00000000 +#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991 0x00000001 +#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454 0x00000002 +#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ 0x00000004 +#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ 0x00000008 +#define IEEE80211_VHT_CAP_RXLDPC 0x00000010 +#define IEEE80211_VHT_CAP_SHORT_GI_80 0x00000020 +#define IEEE80211_VHT_CAP_SHORT_GI_160 0x00000040 +#define IEEE80211_VHT_CAP_TXSTBC 0x00000080 +#define IEEE80211_VHT_CAP_RXSTBC_1 0x00000100 +#define IEEE80211_VHT_CAP_RXSTBC_2 0x00000200 +#define IEEE80211_VHT_CAP_RXSTBC_3 0x00000300 +#define IEEE80211_VHT_CAP_RXSTBC_4 0x00000400 +#define IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE 0x00000800 +#define IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE 0x00001000 +#define IEEE80211_VHT_CAP_BEAMFORMER_ANTENNAS_MAX 0x00006000 +#define IEEE80211_VHT_CAP_SOUNDING_DIMENTION_MAX 0x00030000 +#define IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE 0x00080000 +#define IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE 0x00100000 +#define IEEE80211_VHT_CAP_VHT_TXOP_PS 0x00200000 +#define IEEE80211_VHT_CAP_HTC_VHT 0x00400000 +#define IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT 0x00800000 +#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_UNSOL_MFB 0x08000000 +#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB 0x0c000000 +#define IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN 0x10000000 +#define IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN 0x20000000 + /* Authentication algorithms */ #define WLAN_AUTH_OPEN 0 #define WLAN_AUTH_SHARED_KEY 1 @@ -1104,6 +1206,21 @@ struct ieee80211_ht_operation { #define WLAN_CAPABILITY_QOS (1<<9) #define WLAN_CAPABILITY_SHORT_SLOT_TIME (1<<10) #define WLAN_CAPABILITY_DSSS_OFDM (1<<13) + +/* DMG (60gHz) 802.11ad */ +/* type - bits 0..1 */ +#define WLAN_CAPABILITY_DMG_TYPE_IBSS (1<<0) /* Tx by: STA */ +#define WLAN_CAPABILITY_DMG_TYPE_PBSS (2<<0) /* Tx by: PCP */ +#define WLAN_CAPABILITY_DMG_TYPE_AP (3<<0) /* Tx by: AP */ + +#define WLAN_CAPABILITY_DMG_CBAP_ONLY (1<<2) +#define WLAN_CAPABILITY_DMG_CBAP_SOURCE (1<<3) +#define WLAN_CAPABILITY_DMG_PRIVACY (1<<4) +#define WLAN_CAPABILITY_DMG_ECPAC (1<<5) + +#define WLAN_CAPABILITY_DMG_SPECTRUM_MGMT (1<<8) +#define WLAN_CAPABILITY_DMG_RADIO_MEASURE (1<<12) + /* measurement */ #define IEEE80211_SPCT_MSR_RPRT_MODE_LATE (1<<0) #define IEEE80211_SPCT_MSR_RPRT_MODE_INCAPABLE (1<<1) @@ -1113,7 +1230,6 @@ struct ieee80211_ht_operation { #define IEEE80211_SPCT_MSR_RPRT_TYPE_CCA 1 #define IEEE80211_SPCT_MSR_RPRT_TYPE_RPI 2 - /* 802.11g ERP information element */ #define WLAN_ERP_NON_ERP_PRESENT (1<<0) #define WLAN_ERP_USE_PROTECTION (1<<1) @@ -1125,6 +1241,16 @@ enum { WLAN_ERP_PREAMBLE_LONG = 1, }; +/* Band ID, 802.11ad #8.4.1.45 */ +enum { + IEEE80211_BANDID_TV_WS = 0, /* TV white spaces */ + IEEE80211_BANDID_SUB1 = 1, /* Sub-1 GHz (excluding TV white spaces) */ + IEEE80211_BANDID_2G = 2, /* 2.4 GHz */ + IEEE80211_BANDID_3G = 3, /* 3.6 GHz */ + IEEE80211_BANDID_5G = 4, /* 4.9 and 5 GHz */ + IEEE80211_BANDID_60G = 5, /* 60 GHz */ +}; + /* Status codes */ enum ieee80211_statuscode { WLAN_STATUS_SUCCESS = 0, @@ -1176,6 +1302,17 @@ enum ieee80211_statuscode { WLAN_STATUS_ANTI_CLOG_REQUIRED = 76, WLAN_STATUS_FCG_NOT_SUPP = 78, WLAN_STATUS_STA_NO_TBTT = 78, + /* 802.11ad */ + WLAN_STATUS_REJECTED_WITH_SUGGESTED_CHANGES = 39, + WLAN_STATUS_REJECTED_FOR_DELAY_PERIOD = 47, + WLAN_STATUS_REJECT_WITH_SCHEDULE = 83, + WLAN_STATUS_PENDING_ADMITTING_FST_SESSION = 86, + WLAN_STATUS_PERFORMING_FST_NOW = 87, + WLAN_STATUS_PENDING_GAP_IN_BA_WINDOW = 88, + WLAN_STATUS_REJECT_U_PID_SETTING = 89, + WLAN_STATUS_REJECT_DSE_BAND = 96, + WLAN_STATUS_DENIED_WITH_SUGGESTED_BAND_AND_CHANNEL = 99, + WLAN_STATUS_DENIED_DUE_TO_SPECTRUM_MANAGEMENT = 103, }; @@ -1332,6 +1469,43 @@ enum ieee80211_eid { WLAN_EID_DSE_REGISTERED_LOCATION = 58, WLAN_EID_SUPPORTED_REGULATORY_CLASSES = 59, WLAN_EID_EXT_CHANSWITCH_ANN = 60, + + WLAN_EID_VHT_CAPABILITY = 191, + WLAN_EID_VHT_OPERATION = 192, + + /* 802.11ad */ + WLAN_EID_NON_TX_BSSID_CAP = 83, + WLAN_EID_WAKEUP_SCHEDULE = 143, + WLAN_EID_EXT_SCHEDULE = 144, + WLAN_EID_STA_AVAILABILITY = 145, + WLAN_EID_DMG_TSPEC = 146, + WLAN_EID_DMG_AT = 147, + WLAN_EID_DMG_CAP = 148, + WLAN_EID_DMG_OPERATION = 151, + WLAN_EID_DMG_BSS_PARAM_CHANGE = 152, + WLAN_EID_DMG_BEAM_REFINEMENT = 153, + WLAN_EID_CHANNEL_MEASURE_FEEDBACK = 154, + WLAN_EID_AWAKE_WINDOW = 157, + WLAN_EID_MULTI_BAND = 158, + WLAN_EID_ADDBA_EXT = 159, + WLAN_EID_NEXT_PCP_LIST = 160, + WLAN_EID_PCP_HANDOVER = 161, + WLAN_EID_DMG_LINK_MARGIN = 162, + WLAN_EID_SWITCHING_STREAM = 163, + WLAN_EID_SESSION_TRANSITION = 164, + WLAN_EID_DYN_TONE_PAIRING_REPORT = 165, + WLAN_EID_CLUSTER_REPORT = 166, + WLAN_EID_RELAY_CAP = 167, + WLAN_EID_RELAY_XFER_PARAM_SET = 168, + WLAN_EID_BEAM_LINK_MAINT = 169, + WLAN_EID_MULTIPLE_MAC_ADDR = 170, + WLAN_EID_U_PID = 171, + WLAN_EID_DMG_LINK_ADAPT_ACK = 172, + WLAN_EID_QUIET_PERIOD_REQ = 175, + WLAN_EID_QUIET_PERIOD_RESP = 177, + WLAN_EID_EPAC_POLICY = 182, + WLAN_EID_CLISTER_TIME_OFF = 183, + WLAN_EID_ANTENNA_SECTOR_ID_PATTERN = 190, }; /* Action category code */ @@ -1348,7 +1522,10 @@ enum ieee80211_category { WLAN_CATEGORY_MESH_ACTION = 13, WLAN_CATEGORY_MULTIHOP_ACTION = 14, WLAN_CATEGORY_SELF_PROTECTED = 15, + WLAN_CATEGORY_DMG = 16, WLAN_CATEGORY_WMM = 17, + WLAN_CATEGORY_FST = 18, + WLAN_CATEGORY_UNPROT_DMG = 20, WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126, WLAN_CATEGORY_VENDOR_SPECIFIC = 127, }; @@ -1443,7 +1620,7 @@ enum ieee80211_tdls_actioncode { * * @IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET: the default synchronization method * @IEEE80211_SYNC_METHOD_VENDOR: a vendor specific synchronization method - * that will be specified in a vendor specific information element + * that will be specified in a vendor specific information element */ enum { IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET = 1, @@ -1455,7 +1632,7 @@ enum { * * @IEEE80211_PATH_PROTOCOL_HWMP: the default path selection protocol * @IEEE80211_PATH_PROTOCOL_VENDOR: a vendor specific protocol that will - * be specified in a vendor specific information element + * be specified in a vendor specific information element */ enum { IEEE80211_PATH_PROTOCOL_HWMP = 1, @@ -1467,13 +1644,35 @@ enum { * * @IEEE80211_PATH_METRIC_AIRTIME: the default path selection metric * @IEEE80211_PATH_METRIC_VENDOR: a vendor specific metric that will be - * specified in a vendor specific information element + * specified in a vendor specific information element */ enum { IEEE80211_PATH_METRIC_AIRTIME = 1, IEEE80211_PATH_METRIC_VENDOR = 255, }; +/** + * enum ieee80211_root_mode_identifier - root mesh STA mode identifier + * + * These attribute are used by dot11MeshHWMPRootMode to set root mesh STA mode + * + * @IEEE80211_ROOTMODE_NO_ROOT: the mesh STA is not a root mesh STA (default) + * @IEEE80211_ROOTMODE_ROOT: the mesh STA is a root mesh STA if greater than + * this value + * @IEEE80211_PROACTIVE_PREQ_NO_PREP: the mesh STA is a root mesh STA supports + * the proactive PREQ with proactive PREP subfield set to 0 + * @IEEE80211_PROACTIVE_PREQ_WITH_PREP: the mesh STA is a root mesh STA + * supports the proactive PREQ with proactive PREP subfield set to 1 + * @IEEE80211_PROACTIVE_RANN: the mesh STA is a root mesh STA supports + * the proactive RANN + */ +enum ieee80211_root_mode_identifier { + IEEE80211_ROOTMODE_NO_ROOT = 0, + IEEE80211_ROOTMODE_ROOT = 1, + IEEE80211_PROACTIVE_PREQ_NO_PREP = 2, + IEEE80211_PROACTIVE_PREQ_WITH_PREP = 3, + IEEE80211_PROACTIVE_RANN = 4, +}; /* * IEEE 802.11-2007 7.3.2.9 Country information element @@ -1574,6 +1773,7 @@ enum ieee80211_sa_query_action { #define WLAN_CIPHER_SUITE_CCMP 0x000FAC04 #define WLAN_CIPHER_SUITE_WEP104 0x000FAC05 #define WLAN_CIPHER_SUITE_AES_CMAC 0x000FAC06 +#define WLAN_CIPHER_SUITE_GCMP 0x000FAC08 #define WLAN_CIPHER_SUITE_SMS4 0x00147201 @@ -1589,6 +1789,10 @@ enum ieee80211_sa_query_action { #define WLAN_OUI_WFA 0x506f9a #define WLAN_OUI_TYPE_WFA_P2P 9 +#define WLAN_OUI_MICROSOFT 0x0050f2 +#define WLAN_OUI_TYPE_MICROSOFT_WPA 1 +#define WLAN_OUI_TYPE_MICROSOFT_WMM 2 +#define WLAN_OUI_TYPE_MICROSOFT_WPS 4 /* * WMM/802.11e Tspec Element diff --git a/include/linux/if.h b/include/linux/if.h index f995c663c49..1ec407b01e4 100644 --- a/include/linux/if.h +++ b/include/linux/if.h @@ -81,6 +81,8 @@ #define IFF_UNICAST_FLT 0x20000 /* Supports unicast filtering */ #define IFF_TEAM_PORT 0x40000 /* device used as team port */ #define IFF_SUPP_NOFCS 0x80000 /* device supports sending custom FCS */ +#define IFF_LIVE_ADDR_CHANGE 0x100000 /* device supports hardware address + * change when it's running */ #define IF_GET_IFACE 0x0001 /* for querying only */ diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h index 56d907a2c80..167ce5b363d 100644 --- a/include/linux/if_ether.h +++ b/include/linux/if_ether.h @@ -105,7 +105,8 @@ #define ETH_P_WAN_PPP 0x0007 /* Dummy type for WAN PPP frames*/ #define ETH_P_PPP_MP 0x0008 /* Dummy type for PPP MP frames */ #define ETH_P_LOCALTALK 0x0009 /* Localtalk pseudo type */ -#define ETH_P_CAN 0x000C /* Controller Area Network */ +#define ETH_P_CAN 0x000C /* CAN: Controller Area Network */ +#define ETH_P_CANFD 0x000D /* CANFD: CAN flexible data rate*/ #define ETH_P_PPPTALK 0x0010 /* Dummy type for Atalk over PPP*/ #define ETH_P_TR_802_2 0x0011 /* 802.2 frames */ #define ETH_P_MOBITEX 0x0015 /* Mobitex (kaz@cafe.net) */ diff --git a/include/linux/if_link.h b/include/linux/if_link.h index f715750d0b8..ac173bd2ab6 100644 --- a/include/linux/if_link.h +++ b/include/linux/if_link.h @@ -140,6 +140,8 @@ enum { IFLA_EXT_MASK, /* Extended info mask, VFs, etc */ IFLA_PROMISCUITY, /* Promiscuity count: > 0 means acts PROMISC */ #define IFLA_PROMISCUITY IFLA_PROMISCUITY + IFLA_NUM_TX_QUEUES, + IFLA_NUM_RX_QUEUES, __IFLA_MAX }; diff --git a/include/linux/if_team.h b/include/linux/if_team.h index 8185f57a9c7..6960fc1841a 100644 --- a/include/linux/if_team.h +++ b/include/linux/if_team.h @@ -13,6 +13,9 @@ #ifdef __KERNEL__ +#include <linux/netpoll.h> +#include <net/sch_generic.h> + struct team_pcpu_stats { u64 rx_packets; u64 rx_bytes; @@ -60,9 +63,54 @@ struct team_port { unsigned int mtu; } orig; - struct rcu_head rcu; +#ifdef CONFIG_NET_POLL_CONTROLLER + struct netpoll *np; +#endif + + long mode_priv[0]; }; +static inline bool team_port_enabled(struct team_port *port) +{ + return port->index != -1; +} + +static inline bool team_port_txable(struct team_port *port) +{ + return port->linkup && team_port_enabled(port); +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static inline void team_netpoll_send_skb(struct team_port *port, + struct sk_buff *skb) +{ + struct netpoll *np = port->np; + + if (np) + netpoll_send_skb(np, skb); +} +#else +static inline void team_netpoll_send_skb(struct team_port *port, + struct sk_buff *skb) +{ +} +#endif + +static inline int team_dev_queue_xmit(struct team *team, struct team_port *port, + struct sk_buff *skb) +{ + BUILD_BUG_ON(sizeof(skb->queue_mapping) != + sizeof(qdisc_skb_cb(skb)->slave_dev_queue_mapping)); + skb_set_queue_mapping(skb, qdisc_skb_cb(skb)->slave_dev_queue_mapping); + + skb->dev = port->dev; + if (unlikely(netpoll_tx_running(port->dev))) { + team_netpoll_send_skb(port, skb); + return 0; + } + return dev_queue_xmit(skb); +} + struct team_mode_ops { int (*init)(struct team *team); void (*exit)(struct team *team); @@ -73,6 +121,8 @@ struct team_mode_ops { int (*port_enter)(struct team *team, struct team_port *port); void (*port_leave)(struct team *team, struct team_port *port); void (*port_change_mac)(struct team *team, struct team_port *port); + void (*port_enabled)(struct team *team, struct team_port *port); + void (*port_disabled)(struct team *team, struct team_port *port); }; enum team_option_type { @@ -82,6 +132,11 @@ enum team_option_type { TEAM_OPTION_TYPE_BOOL, }; +struct team_option_inst_info { + u32 array_index; + struct team_port *port; /* != NULL if per-port */ +}; + struct team_gsetter_ctx { union { u32 u32_val; @@ -92,23 +147,28 @@ struct team_gsetter_ctx { } bin_val; bool bool_val; } data; - struct team_port *port; + struct team_option_inst_info *info; }; struct team_option { struct list_head list; const char *name; bool per_port; + unsigned int array_size; /* != 0 means the option is array */ enum team_option_type type; + int (*init)(struct team *team, struct team_option_inst_info *info); int (*getter)(struct team *team, struct team_gsetter_ctx *ctx); int (*setter)(struct team *team, struct team_gsetter_ctx *ctx); }; +extern void team_option_inst_set_change(struct team_option_inst_info *opt_inst_info); +extern void team_options_change_check(struct team *team); + struct team_mode { - struct list_head list; const char *kind; struct module *owner; size_t priv_size; + size_t port_priv_size; const struct team_mode_ops *ops; }; @@ -178,8 +238,11 @@ extern int team_options_register(struct team *team, extern void team_options_unregister(struct team *team, const struct team_option *option, size_t option_count); -extern int team_mode_register(struct team_mode *mode); -extern int team_mode_unregister(struct team_mode *mode); +extern int team_mode_register(const struct team_mode *mode); +extern void team_mode_unregister(const struct team_mode *mode); + +#define TEAM_DEFAULT_NUM_TX_QUEUES 16 +#define TEAM_DEFAULT_NUM_RX_QUEUES 16 #endif /* __KERNEL__ */ @@ -241,6 +304,7 @@ enum { TEAM_ATTR_OPTION_DATA, /* dynamic */ TEAM_ATTR_OPTION_REMOVED, /* flag */ TEAM_ATTR_OPTION_PORT_IFINDEX, /* u32 */ /* for per-port options */ + TEAM_ATTR_OPTION_ARRAY_INDEX, /* u32 */ /* for array options */ __TEAM_ATTR_OPTION_MAX, TEAM_ATTR_OPTION_MAX = __TEAM_ATTR_OPTION_MAX - 1, diff --git a/include/linux/if_tunnel.h b/include/linux/if_tunnel.h index 16b92d008be..5efff60b6f5 100644 --- a/include/linux/if_tunnel.h +++ b/include/linux/if_tunnel.h @@ -80,4 +80,18 @@ enum { #define IFLA_GRE_MAX (__IFLA_GRE_MAX - 1) +/* VTI-mode i_flags */ +#define VTI_ISVTI 0x0001 + +enum { + IFLA_VTI_UNSPEC, + IFLA_VTI_LINK, + IFLA_VTI_IKEY, + IFLA_VTI_OKEY, + IFLA_VTI_LOCAL, + IFLA_VTI_REMOTE, + __IFLA_VTI_MAX, +}; + +#define IFLA_VTI_MAX (__IFLA_VTI_MAX - 1) #endif /* _IF_TUNNEL_H_ */ diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h index 597f4a9f324..67f9ddacb70 100644 --- a/include/linux/inetdevice.h +++ b/include/linux/inetdevice.h @@ -38,6 +38,7 @@ enum IPV4_DEVCONF_ACCEPT_LOCAL, IPV4_DEVCONF_SRC_VMARK, IPV4_DEVCONF_PROXY_ARP_PVLAN, + IPV4_DEVCONF_ROUTE_LOCALNET, __IPV4_DEVCONF_MAX }; @@ -131,6 +132,7 @@ static inline void ipv4_devconf_setall(struct in_device *in_dev) #define IN_DEV_PROMOTE_SECONDARIES(in_dev) \ IN_DEV_ORCONF((in_dev), \ PROMOTE_SECONDARIES) +#define IN_DEV_ROUTE_LOCALNET(in_dev) IN_DEV_ORCONF(in_dev, ROUTE_LOCALNET) #define IN_DEV_RX_REDIRECTS(in_dev) \ ((IN_DEV_FORWARD(in_dev) && \ diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index 8260ef77976..379e433e15e 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -299,9 +299,9 @@ struct ipv6_pinfo { struct in6_addr rcv_saddr; struct in6_addr daddr; struct in6_pktinfo sticky_pktinfo; - struct in6_addr *daddr_cache; + const struct in6_addr *daddr_cache; #ifdef CONFIG_IPV6_SUBTREES - struct in6_addr *saddr_cache; + const struct in6_addr *saddr_cache; #endif __be32 flow_label; @@ -410,6 +410,22 @@ struct tcp6_sock { extern int inet6_sk_rebuild_header(struct sock *sk); +struct inet6_timewait_sock { + struct in6_addr tw_v6_daddr; + struct in6_addr tw_v6_rcv_saddr; +}; + +struct tcp6_timewait_sock { + struct tcp_timewait_sock tcp6tw_tcp; + struct inet6_timewait_sock tcp6tw_inet6; +}; + +static inline struct inet6_timewait_sock *inet6_twsk(const struct sock *sk) +{ + return (struct inet6_timewait_sock *)(((u8 *)sk) + + inet_twsk(sk)->tw_ipv6_offset); +} + #if IS_ENABLED(CONFIG_IPV6) static inline struct ipv6_pinfo * inet6_sk(const struct sock *__sk) { @@ -459,28 +475,12 @@ static inline void inet_sk_copy_descendant(struct sock *sk_to, #define __ipv6_only_sock(sk) (inet6_sk(sk)->ipv6only) #define ipv6_only_sock(sk) ((sk)->sk_family == PF_INET6 && __ipv6_only_sock(sk)) -struct inet6_timewait_sock { - struct in6_addr tw_v6_daddr; - struct in6_addr tw_v6_rcv_saddr; -}; - -struct tcp6_timewait_sock { - struct tcp_timewait_sock tcp6tw_tcp; - struct inet6_timewait_sock tcp6tw_inet6; -}; - static inline u16 inet6_tw_offset(const struct proto *prot) { return prot->twsk_prot->twsk_obj_size - sizeof(struct inet6_timewait_sock); } -static inline struct inet6_timewait_sock *inet6_twsk(const struct sock *sk) -{ - return (struct inet6_timewait_sock *)(((u8 *)sk) + - inet_twsk(sk)->tw_ipv6_offset); -} - static inline struct in6_addr *__inet6_rcv_saddr(const struct sock *sk) { return likely(sk->sk_state != TCP_TIME_WAIT) ? diff --git a/include/linux/ks8851_mll.h b/include/linux/ks8851_mll.h new file mode 100644 index 00000000000..e9ccfb59ed3 --- /dev/null +++ b/include/linux/ks8851_mll.h @@ -0,0 +1,33 @@ +/* + * ks8861_mll platform data struct definition + * Copyright (c) 2012 BTicino S.p.A. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _LINUX_KS8851_MLL_H +#define _LINUX_KS8851_MLL_H + +#include <linux/if_ether.h> + +/** + * struct ks8851_mll_platform_data - Platform data of the KS8851_MLL network driver + * @macaddr: The MAC address of the device, set to all 0:s to use the on in + * the chip. + */ +struct ks8851_mll_platform_data { + u8 mac_addr[ETH_ALEN]; +}; + +#endif diff --git a/include/linux/mdio.h b/include/linux/mdio.h index dfb947959ec..7cccafe50e7 100644 --- a/include/linux/mdio.h +++ b/include/linux/mdio.h @@ -43,7 +43,11 @@ #define MDIO_PKGID2 15 #define MDIO_AN_ADVERTISE 16 /* AN advertising (base page) */ #define MDIO_AN_LPA 19 /* AN LP abilities (base page) */ +#define MDIO_PCS_EEE_ABLE 20 /* EEE Capability register */ +#define MDIO_PCS_EEE_WK_ERR 22 /* EEE wake error counter */ #define MDIO_PHYXS_LNSTAT 24 /* PHY XGXS lane state */ +#define MDIO_AN_EEE_ADV 60 /* EEE advertisement */ +#define MDIO_AN_EEE_LPABLE 61 /* EEE link partner ability */ /* Media-dependent registers. */ #define MDIO_PMA_10GBT_SWAPPOL 130 /* 10GBASE-T pair swap & polarity */ @@ -56,7 +60,6 @@ #define MDIO_PCS_10GBRT_STAT2 33 /* 10GBASE-R/-T PCS status 2 */ #define MDIO_AN_10GBT_CTRL 32 /* 10GBASE-T auto-negotiation control */ #define MDIO_AN_10GBT_STAT 33 /* 10GBASE-T auto-negotiation status */ -#define MDIO_AN_EEE_ADV 60 /* EEE advertisement */ /* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */ #define MDIO_PMA_LASI_RXCTRL 0x9000 /* RX_ALARM control */ @@ -82,6 +85,7 @@ #define MDIO_AN_CTRL1_RESTART BMCR_ANRESTART #define MDIO_AN_CTRL1_ENABLE BMCR_ANENABLE #define MDIO_AN_CTRL1_XNP 0x2000 /* Enable extended next page */ +#define MDIO_PCS_CTRL1_CLKSTOP_EN 0x400 /* Stop the clock during LPI */ /* 10 Gb/s */ #define MDIO_CTRL1_SPEED10G (MDIO_CTRL1_SPEEDSELEXT | 0x00) @@ -237,9 +241,25 @@ #define MDIO_AN_10GBT_STAT_MS 0x4000 /* Master/slave config */ #define MDIO_AN_10GBT_STAT_MSFLT 0x8000 /* Master/slave config fault */ -/* AN EEE Advertisement register. */ -#define MDIO_AN_EEE_ADV_100TX 0x0002 /* Advertise 100TX EEE cap */ -#define MDIO_AN_EEE_ADV_1000T 0x0004 /* Advertise 1000T EEE cap */ +/* EEE Supported/Advertisement/LP Advertisement registers. + * + * EEE capability Register (3.20), Advertisement (7.60) and + * Link partner ability (7.61) registers have and can use the same identical + * bit masks. + */ +#define MDIO_AN_EEE_ADV_100TX 0x0002 /* Advertise 100TX EEE cap */ +#define MDIO_AN_EEE_ADV_1000T 0x0004 /* Advertise 1000T EEE cap */ +/* Note: the two defines above can be potentially used by the user-land + * and cannot remove them now. + * So, we define the new generic MDIO_EEE_100TX and MDIO_EEE_1000T macros + * using the previous ones (that can be considered obsolete). + */ +#define MDIO_EEE_100TX MDIO_AN_EEE_ADV_100TX /* 100TX EEE cap */ +#define MDIO_EEE_1000T MDIO_AN_EEE_ADV_1000T /* 1000T EEE cap */ +#define MDIO_EEE_10GT 0x0008 /* 10GT EEE cap */ +#define MDIO_EEE_1000KX 0x0010 /* 1000KX EEE cap */ +#define MDIO_EEE_10GKX4 0x0020 /* 10G KX4 EEE cap */ +#define MDIO_EEE_10GKR 0x0040 /* 10G KR EEE cap */ /* LASI RX_ALARM control/status registers. */ #define MDIO_PMA_LASI_RX_PHYXSLFLT 0x0001 /* PHY XS RX local fault */ diff --git a/include/linux/mii.h b/include/linux/mii.h index 2783eca629a..8ef3a7a1159 100644 --- a/include/linux/mii.h +++ b/include/linux/mii.h @@ -21,6 +21,8 @@ #define MII_EXPANSION 0x06 /* Expansion register */ #define MII_CTRL1000 0x09 /* 1000BASE-T control */ #define MII_STAT1000 0x0a /* 1000BASE-T status */ +#define MII_MMD_CTRL 0x0d /* MMD Access Control Register */ +#define MII_MMD_DATA 0x0e /* MMD Access Data Register */ #define MII_ESTATUS 0x0f /* Extended Status */ #define MII_DCOUNTER 0x12 /* Disconnect counter */ #define MII_FCSCOUNTER 0x13 /* False carrier counter */ @@ -141,6 +143,13 @@ #define FLOW_CTRL_TX 0x01 #define FLOW_CTRL_RX 0x02 +/* MMD Access Control register fields */ +#define MII_MMD_CTRL_DEVAD_MASK 0x1f /* Mask MMD DEVAD*/ +#define MII_MMD_CTRL_ADDR 0x0000 /* Address */ +#define MII_MMD_CTRL_NOINCR 0x4000 /* no post increment */ +#define MII_MMD_CTRL_INCR_RDWT 0x8000 /* post increment on reads & writes */ +#define MII_MMD_CTRL_INCR_ON_WT 0xC000 /* post increment on writes only */ + /* This structure is used in all SIOCxMIIxxx ioctl calls */ struct mii_ioctl_data { __u16 phy_id; diff --git a/include/linux/mlx4/cmd.h b/include/linux/mlx4/cmd.h index 1f3860a8a10..26069518625 100644 --- a/include/linux/mlx4/cmd.h +++ b/include/linux/mlx4/cmd.h @@ -154,6 +154,10 @@ enum { /* set port opcode modifiers */ MLX4_SET_PORT_PRIO2TC = 0x8, MLX4_SET_PORT_SCHEDULER = 0x9, + + /* register/delete flow steering network rules */ + MLX4_QP_FLOW_STEERING_ATTACH = 0x65, + MLX4_QP_FLOW_STEERING_DETACH = 0x66, }; enum { diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index 6a8f002b8ed..4d7761f8c3f 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -36,6 +36,7 @@ #include <linux/pci.h> #include <linux/completion.h> #include <linux/radix-tree.h> +#include <linux/cpu_rmap.h> #include <linux/atomic.h> @@ -70,6 +71,36 @@ enum { MLX4_MFUNC_EQE_MASK = (MLX4_MFUNC_MAX_EQES - 1) }; +/* Driver supports 3 diffrent device methods to manage traffic steering: + * -device managed - High level API for ib and eth flow steering. FW is + * managing flow steering tables. + * - B0 steering mode - Common low level API for ib and (if supported) eth. + * - A0 steering mode - Limited low level API for eth. In case of IB, + * B0 mode is in use. + */ +enum { + MLX4_STEERING_MODE_A0, + MLX4_STEERING_MODE_B0, + MLX4_STEERING_MODE_DEVICE_MANAGED +}; + +static inline const char *mlx4_steering_mode_str(int steering_mode) +{ + switch (steering_mode) { + case MLX4_STEERING_MODE_A0: + return "A0 steering"; + + case MLX4_STEERING_MODE_B0: + return "B0 steering"; + + case MLX4_STEERING_MODE_DEVICE_MANAGED: + return "Device managed flow steering"; + + default: + return "Unrecognize steering mode"; + } +} + enum { MLX4_DEV_CAP_FLAG_RC = 1LL << 0, MLX4_DEV_CAP_FLAG_UC = 1LL << 1, @@ -102,7 +133,8 @@ enum { enum { MLX4_DEV_CAP_FLAG2_RSS = 1LL << 0, MLX4_DEV_CAP_FLAG2_RSS_TOP = 1LL << 1, - MLX4_DEV_CAP_FLAG2_RSS_XOR = 1LL << 2 + MLX4_DEV_CAP_FLAG2_RSS_XOR = 1LL << 2, + MLX4_DEV_CAP_FLAG2_FS_EN = 1LL << 3 }; #define MLX4_ATTR_EXTENDED_PORT_INFO cpu_to_be16(0xff90) @@ -295,6 +327,8 @@ struct mlx4_caps { int num_amgms; int reserved_mcgs; int num_qp_per_mgm; + int steering_mode; + int fs_log_max_ucast_qp_range_size; int num_pds; int reserved_pds; int max_xrcds; @@ -509,6 +543,8 @@ struct mlx4_dev { u8 rev_id; char board_id[MLX4_BOARD_ID_LEN]; int num_vfs; + u64 regid_promisc_array[MLX4_MAX_PORTS + 1]; + u64 regid_allmulti_array[MLX4_MAX_PORTS + 1]; }; struct mlx4_init_port_param { @@ -623,9 +659,99 @@ int mlx4_unicast_attach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16], int mlx4_unicast_detach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16], enum mlx4_protocol prot); int mlx4_multicast_attach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16], - int block_mcast_loopback, enum mlx4_protocol protocol); + u8 port, int block_mcast_loopback, + enum mlx4_protocol protocol, u64 *reg_id); int mlx4_multicast_detach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16], - enum mlx4_protocol protocol); + enum mlx4_protocol protocol, u64 reg_id); + +enum { + MLX4_DOMAIN_UVERBS = 0x1000, + MLX4_DOMAIN_ETHTOOL = 0x2000, + MLX4_DOMAIN_RFS = 0x3000, + MLX4_DOMAIN_NIC = 0x5000, +}; + +enum mlx4_net_trans_rule_id { + MLX4_NET_TRANS_RULE_ID_ETH = 0, + MLX4_NET_TRANS_RULE_ID_IB, + MLX4_NET_TRANS_RULE_ID_IPV6, + MLX4_NET_TRANS_RULE_ID_IPV4, + MLX4_NET_TRANS_RULE_ID_TCP, + MLX4_NET_TRANS_RULE_ID_UDP, + MLX4_NET_TRANS_RULE_NUM, /* should be last */ +}; + +enum mlx4_net_trans_promisc_mode { + MLX4_FS_PROMISC_NONE = 0, + MLX4_FS_PROMISC_UPLINK, + /* For future use. Not implemented yet */ + MLX4_FS_PROMISC_FUNCTION_PORT, + MLX4_FS_PROMISC_ALL_MULTI, +}; + +struct mlx4_spec_eth { + u8 dst_mac[6]; + u8 dst_mac_msk[6]; + u8 src_mac[6]; + u8 src_mac_msk[6]; + u8 ether_type_enable; + __be16 ether_type; + __be16 vlan_id_msk; + __be16 vlan_id; +}; + +struct mlx4_spec_tcp_udp { + __be16 dst_port; + __be16 dst_port_msk; + __be16 src_port; + __be16 src_port_msk; +}; + +struct mlx4_spec_ipv4 { + __be32 dst_ip; + __be32 dst_ip_msk; + __be32 src_ip; + __be32 src_ip_msk; +}; + +struct mlx4_spec_ib { + __be32 r_qpn; + __be32 qpn_msk; + u8 dst_gid[16]; + u8 dst_gid_msk[16]; +}; + +struct mlx4_spec_list { + struct list_head list; + enum mlx4_net_trans_rule_id id; + union { + struct mlx4_spec_eth eth; + struct mlx4_spec_ib ib; + struct mlx4_spec_ipv4 ipv4; + struct mlx4_spec_tcp_udp tcp_udp; + }; +}; + +enum mlx4_net_trans_hw_rule_queue { + MLX4_NET_TRANS_Q_FIFO, + MLX4_NET_TRANS_Q_LIFO, +}; + +struct mlx4_net_trans_rule { + struct list_head list; + enum mlx4_net_trans_hw_rule_queue queue_mode; + bool exclusive; + bool allow_loopback; + enum mlx4_net_trans_promisc_mode promisc_mode; + u8 port; + u16 priority; + u32 qpn; +}; + +int mlx4_flow_steer_promisc_add(struct mlx4_dev *dev, u8 port, u32 qpn, + enum mlx4_net_trans_promisc_mode mode); +int mlx4_flow_steer_promisc_remove(struct mlx4_dev *dev, u8 port, + enum mlx4_net_trans_promisc_mode mode); int mlx4_multicast_promisc_add(struct mlx4_dev *dev, u32 qpn, u8 port); int mlx4_multicast_promisc_remove(struct mlx4_dev *dev, u32 qpn, u8 port); int mlx4_unicast_promisc_add(struct mlx4_dev *dev, u32 qpn, u8 port); @@ -659,7 +785,8 @@ void mlx4_fmr_unmap(struct mlx4_dev *dev, struct mlx4_fmr *fmr, int mlx4_fmr_free(struct mlx4_dev *dev, struct mlx4_fmr *fmr); int mlx4_SYNC_TPT(struct mlx4_dev *dev); int mlx4_test_interrupts(struct mlx4_dev *dev); -int mlx4_assign_eq(struct mlx4_dev *dev, char* name , int* vector); +int mlx4_assign_eq(struct mlx4_dev *dev, char *name, struct cpu_rmap *rmap, + int *vector); void mlx4_release_eq(struct mlx4_dev *dev, int vec); int mlx4_wol_read(struct mlx4_dev *dev, u64 *config, int port); @@ -668,4 +795,8 @@ int mlx4_wol_write(struct mlx4_dev *dev, u64 config, int port); int mlx4_counter_alloc(struct mlx4_dev *dev, u32 *idx); void mlx4_counter_free(struct mlx4_dev *dev, u32 idx); +int mlx4_flow_attach(struct mlx4_dev *dev, + struct mlx4_net_trans_rule *rule, u64 *reg_id); +int mlx4_flow_detach(struct mlx4_dev *dev, u64 reg_id); + #endif /* MLX4_DEVICE_H */ diff --git a/include/linux/mlx4/driver.h b/include/linux/mlx4/driver.h index 5f1298b1b5e..8dc485febc6 100644 --- a/include/linux/mlx4/driver.h +++ b/include/linux/mlx4/driver.h @@ -37,6 +37,8 @@ struct mlx4_dev; +#define MLX4_MAC_MASK 0xffffffffffffULL + enum mlx4_dev_event { MLX4_DEV_EVENT_CATASTROPHIC_ERROR, MLX4_DEV_EVENT_PORT_UP, diff --git a/include/linux/net.h b/include/linux/net.h index e9ac2df079b..99276c3dc89 100644 --- a/include/linux/net.h +++ b/include/linux/net.h @@ -72,6 +72,7 @@ struct net; #define SOCK_NOSPACE 2 #define SOCK_PASSCRED 3 #define SOCK_PASSSEC 4 +#define SOCK_EXTERNALLY_ALLOCATED 5 #ifndef ARCH_HAS_SOCKET_TYPES /** @@ -247,6 +248,7 @@ extern int sock_recvmsg(struct socket *sock, struct msghdr *msg, size_t size, int flags); extern int sock_map_fd(struct socket *sock, int flags); extern struct socket *sockfd_lookup(int fd, int *err); +extern struct socket *sock_from_file(struct file *file, int *err); #define sockfd_put(sock) fput(sock->file) extern int net_ratelimit(void); diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index d94cb143151..eb06e58bed0 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1046,10 +1046,9 @@ struct net_device { */ char name[IFNAMSIZ]; - struct pm_qos_request pm_qos_req; - - /* device name hash chain */ + /* device name hash chain, please keep it close to name[] */ struct hlist_node name_hlist; + /* snmp alias */ char *ifalias; @@ -1322,6 +1321,8 @@ struct net_device { /* group the device belongs to */ int group; + + struct pm_qos_request pm_qos_req; }; #define to_net_dev(d) container_of(d, struct net_device, dev) @@ -1626,6 +1627,7 @@ extern int dev_alloc_name(struct net_device *dev, const char *name); extern int dev_open(struct net_device *dev); extern int dev_close(struct net_device *dev); extern void dev_disable_lro(struct net_device *dev); +extern int dev_loopback_xmit(struct sk_buff *newskb); extern int dev_queue_xmit(struct sk_buff *skb); extern int register_netdevice(struct net_device *dev); extern void unregister_netdevice_queue(struct net_device *dev, @@ -2108,7 +2110,12 @@ static inline int netif_set_real_num_rx_queues(struct net_device *dev, static inline int netif_copy_real_num_queues(struct net_device *to_dev, const struct net_device *from_dev) { - netif_set_real_num_tx_queues(to_dev, from_dev->real_num_tx_queues); + int err; + + err = netif_set_real_num_tx_queues(to_dev, + from_dev->real_num_tx_queues); + if (err) + return err; #ifdef CONFIG_RPS return netif_set_real_num_rx_queues(to_dev, from_dev->real_num_rx_queues); @@ -2117,6 +2124,9 @@ static inline int netif_copy_real_num_queues(struct net_device *to_dev, #endif } +#define DEFAULT_MAX_NUM_RSS_QUEUES (8) +extern int netif_get_num_default_rss_queues(void); + /* Use this variant when it is known for sure that it * is executing from hardware interrupt context or with hardware interrupts * disabled. diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h index ff9c84c29b2..c613cf0d788 100644 --- a/include/linux/netfilter.h +++ b/include/linux/netfilter.h @@ -94,6 +94,16 @@ static inline int nf_inet_addr_cmp(const union nf_inet_addr *a1, a1->all[3] == a2->all[3]; } +static inline void nf_inet_addr_mask(const union nf_inet_addr *a1, + union nf_inet_addr *result, + const union nf_inet_addr *mask) +{ + result->all[0] = a1->all[0] & mask->all[0]; + result->all[1] = a1->all[1] & mask->all[1]; + result->all[2] = a1->all[2] & mask->all[2]; + result->all[3] = a1->all[3] & mask->all[3]; +} + extern void netfilter_init(void); /* Largest hook number + 1 */ @@ -383,6 +393,22 @@ nf_nat_decode_session(struct sk_buff *skb, struct flowi *fl, u_int8_t family) extern void (*ip_ct_attach)(struct sk_buff *, struct sk_buff *) __rcu; extern void nf_ct_attach(struct sk_buff *, struct sk_buff *); extern void (*nf_ct_destroy)(struct nf_conntrack *) __rcu; + +struct nf_conn; +struct nlattr; + +struct nfq_ct_hook { + size_t (*build_size)(const struct nf_conn *ct); + int (*build)(struct sk_buff *skb, struct nf_conn *ct); + int (*parse)(const struct nlattr *attr, struct nf_conn *ct); +}; +extern struct nfq_ct_hook __rcu *nfq_ct_hook; + +struct nfq_ct_nat_hook { + void (*seq_adjust)(struct sk_buff *skb, struct nf_conn *ct, + u32 ctinfo, int off); +}; +extern struct nfq_ct_nat_hook __rcu *nfq_ct_nat_hook; #else static inline void nf_ct_attach(struct sk_buff *new, struct sk_buff *skb) {} #endif diff --git a/include/linux/netfilter/Kbuild b/include/linux/netfilter/Kbuild index 1697036336b..874ae8f2706 100644 --- a/include/linux/netfilter/Kbuild +++ b/include/linux/netfilter/Kbuild @@ -10,6 +10,7 @@ header-y += nfnetlink.h header-y += nfnetlink_acct.h header-y += nfnetlink_compat.h header-y += nfnetlink_conntrack.h +header-y += nfnetlink_cthelper.h header-y += nfnetlink_cttimeout.h header-y += nfnetlink_log.h header-y += nfnetlink_queue.h diff --git a/include/linux/netfilter/nf_conntrack_sip.h b/include/linux/netfilter/nf_conntrack_sip.h index 0ce91d56a5f..0dfc8b7210a 100644 --- a/include/linux/netfilter/nf_conntrack_sip.h +++ b/include/linux/netfilter/nf_conntrack_sip.h @@ -2,6 +2,8 @@ #define __NF_CONNTRACK_SIP_H__ #ifdef __KERNEL__ +#include <net/netfilter/nf_conntrack_expect.h> + #define SIP_PORT 5060 #define SIP_TIMEOUT 3600 diff --git a/include/linux/netfilter/nfnetlink.h b/include/linux/netfilter/nfnetlink.h index a1048c1587d..18341cdb244 100644 --- a/include/linux/netfilter/nfnetlink.h +++ b/include/linux/netfilter/nfnetlink.h @@ -50,7 +50,8 @@ struct nfgenmsg { #define NFNL_SUBSYS_IPSET 6 #define NFNL_SUBSYS_ACCT 7 #define NFNL_SUBSYS_CTNETLINK_TIMEOUT 8 -#define NFNL_SUBSYS_COUNT 9 +#define NFNL_SUBSYS_CTHELPER 9 +#define NFNL_SUBSYS_COUNT 10 #ifdef __KERNEL__ diff --git a/include/linux/netfilter/nfnetlink_conntrack.h b/include/linux/netfilter/nfnetlink_conntrack.h index e58e4b93c10..f649f7423ca 100644 --- a/include/linux/netfilter/nfnetlink_conntrack.h +++ b/include/linux/netfilter/nfnetlink_conntrack.h @@ -7,6 +7,8 @@ enum cntl_msg_types { IPCTNL_MSG_CT_GET, IPCTNL_MSG_CT_DELETE, IPCTNL_MSG_CT_GET_CTRZERO, + IPCTNL_MSG_CT_GET_STATS_CPU, + IPCTNL_MSG_CT_GET_STATS, IPCTNL_MSG_MAX }; @@ -15,6 +17,7 @@ enum ctnl_exp_msg_types { IPCTNL_MSG_EXP_NEW, IPCTNL_MSG_EXP_GET, IPCTNL_MSG_EXP_DELETE, + IPCTNL_MSG_EXP_GET_STATS_CPU, IPCTNL_MSG_EXP_MAX }; @@ -191,6 +194,7 @@ enum ctattr_expect_nat { enum ctattr_help { CTA_HELP_UNSPEC, CTA_HELP_NAME, + CTA_HELP_INFO, __CTA_HELP_MAX }; #define CTA_HELP_MAX (__CTA_HELP_MAX - 1) @@ -202,4 +206,39 @@ enum ctattr_secctx { }; #define CTA_SECCTX_MAX (__CTA_SECCTX_MAX - 1) +enum ctattr_stats_cpu { + CTA_STATS_UNSPEC, + CTA_STATS_SEARCHED, + CTA_STATS_FOUND, + CTA_STATS_NEW, + CTA_STATS_INVALID, + CTA_STATS_IGNORE, + CTA_STATS_DELETE, + CTA_STATS_DELETE_LIST, + CTA_STATS_INSERT, + CTA_STATS_INSERT_FAILED, + CTA_STATS_DROP, + CTA_STATS_EARLY_DROP, + CTA_STATS_ERROR, + CTA_STATS_SEARCH_RESTART, + __CTA_STATS_MAX, +}; +#define CTA_STATS_MAX (__CTA_STATS_MAX - 1) + +enum ctattr_stats_global { + CTA_STATS_GLOBAL_UNSPEC, + CTA_STATS_GLOBAL_ENTRIES, + __CTA_STATS_GLOBAL_MAX, +}; +#define CTA_STATS_GLOBAL_MAX (__CTA_STATS_GLOBAL_MAX - 1) + +enum ctattr_expect_stats { + CTA_STATS_EXP_UNSPEC, + CTA_STATS_EXP_NEW, + CTA_STATS_EXP_CREATE, + CTA_STATS_EXP_DELETE, + __CTA_STATS_EXP_MAX, +}; +#define CTA_STATS_EXP_MAX (__CTA_STATS_EXP_MAX - 1) + #endif /* _IPCONNTRACK_NETLINK_H */ diff --git a/include/linux/netfilter/nfnetlink_cthelper.h b/include/linux/netfilter/nfnetlink_cthelper.h new file mode 100644 index 00000000000..33659f6fad3 --- /dev/null +++ b/include/linux/netfilter/nfnetlink_cthelper.h @@ -0,0 +1,55 @@ +#ifndef _NFNL_CTHELPER_H_ +#define _NFNL_CTHELPER_H_ + +#define NFCT_HELPER_STATUS_DISABLED 0 +#define NFCT_HELPER_STATUS_ENABLED 1 + +enum nfnl_acct_msg_types { + NFNL_MSG_CTHELPER_NEW, + NFNL_MSG_CTHELPER_GET, + NFNL_MSG_CTHELPER_DEL, + NFNL_MSG_CTHELPER_MAX +}; + +enum nfnl_cthelper_type { + NFCTH_UNSPEC, + NFCTH_NAME, + NFCTH_TUPLE, + NFCTH_QUEUE_NUM, + NFCTH_POLICY, + NFCTH_PRIV_DATA_LEN, + NFCTH_STATUS, + __NFCTH_MAX +}; +#define NFCTH_MAX (__NFCTH_MAX - 1) + +enum nfnl_cthelper_policy_type { + NFCTH_POLICY_SET_UNSPEC, + NFCTH_POLICY_SET_NUM, + NFCTH_POLICY_SET, + NFCTH_POLICY_SET1 = NFCTH_POLICY_SET, + NFCTH_POLICY_SET2, + NFCTH_POLICY_SET3, + NFCTH_POLICY_SET4, + __NFCTH_POLICY_SET_MAX +}; +#define NFCTH_POLICY_SET_MAX (__NFCTH_POLICY_SET_MAX - 1) + +enum nfnl_cthelper_pol_type { + NFCTH_POLICY_UNSPEC, + NFCTH_POLICY_NAME, + NFCTH_POLICY_EXPECT_MAX, + NFCTH_POLICY_EXPECT_TIMEOUT, + __NFCTH_POLICY_MAX +}; +#define NFCTH_POLICY_MAX (__NFCTH_POLICY_MAX - 1) + +enum nfnl_cthelper_tuple_type { + NFCTH_TUPLE_UNSPEC, + NFCTH_TUPLE_L3PROTONUM, + NFCTH_TUPLE_L4PROTONUM, + __NFCTH_TUPLE_MAX, +}; +#define NFCTH_TUPLE_MAX (__NFCTH_TUPLE_MAX - 1) + +#endif /* _NFNL_CTHELPER_H */ diff --git a/include/linux/netfilter/nfnetlink_queue.h b/include/linux/netfilter/nfnetlink_queue.h index 24b32e6c009..3b1c1360aed 100644 --- a/include/linux/netfilter/nfnetlink_queue.h +++ b/include/linux/netfilter/nfnetlink_queue.h @@ -42,6 +42,8 @@ enum nfqnl_attr_type { NFQA_IFINDEX_PHYSOUTDEV, /* __u32 ifindex */ NFQA_HWADDR, /* nfqnl_msg_packet_hw */ NFQA_PAYLOAD, /* opaque data payload */ + NFQA_CT, /* nf_conntrack_netlink.h */ + NFQA_CT_INFO, /* enum ip_conntrack_info */ __NFQA_MAX }; @@ -84,8 +86,15 @@ enum nfqnl_attr_config { NFQA_CFG_CMD, /* nfqnl_msg_config_cmd */ NFQA_CFG_PARAMS, /* nfqnl_msg_config_params */ NFQA_CFG_QUEUE_MAXLEN, /* __u32 */ + NFQA_CFG_MASK, /* identify which flags to change */ + NFQA_CFG_FLAGS, /* value of these flags (__u32) */ __NFQA_CFG_MAX }; #define NFQA_CFG_MAX (__NFQA_CFG_MAX-1) +/* Flags for NFQA_CFG_FLAGS */ +#define NFQA_CFG_F_FAIL_OPEN (1 << 0) +#define NFQA_CFG_F_CONNTRACK (1 << 1) +#define NFQA_CFG_F_MAX (1 << 2) + #endif /* _NFNETLINK_QUEUE_H */ diff --git a/include/linux/netfilter/xt_connlimit.h b/include/linux/netfilter/xt_connlimit.h index d1366f05d1b..f1656096121 100644 --- a/include/linux/netfilter/xt_connlimit.h +++ b/include/linux/netfilter/xt_connlimit.h @@ -22,13 +22,8 @@ struct xt_connlimit_info { #endif }; unsigned int limit; - union { - /* revision 0 */ - unsigned int inverse; - - /* revision 1 */ - __u32 flags; - }; + /* revision 1 */ + __u32 flags; /* Used internally by the kernel */ struct xt_connlimit_data *data __attribute__((aligned(8))); diff --git a/include/linux/netfilter/xt_recent.h b/include/linux/netfilter/xt_recent.h index 83318e01425..6ef36c113e8 100644 --- a/include/linux/netfilter/xt_recent.h +++ b/include/linux/netfilter/xt_recent.h @@ -32,4 +32,14 @@ struct xt_recent_mtinfo { __u8 side; }; +struct xt_recent_mtinfo_v1 { + __u32 seconds; + __u32 hit_count; + __u8 check_set; + __u8 invert; + char name[XT_RECENT_NAME_LEN]; + __u8 side; + union nf_inet_addr mask; +}; + #endif /* _LINUX_NETFILTER_XT_RECENT_H */ diff --git a/include/linux/netfilter_ipv4.h b/include/linux/netfilter_ipv4.h index fa0946c549d..e2b12801378 100644 --- a/include/linux/netfilter_ipv4.h +++ b/include/linux/netfilter_ipv4.h @@ -66,6 +66,7 @@ enum nf_ip_hook_priorities { NF_IP_PRI_SECURITY = 50, NF_IP_PRI_NAT_SRC = 100, NF_IP_PRI_SELINUX_LAST = 225, + NF_IP_PRI_CONNTRACK_HELPER = 300, NF_IP_PRI_CONNTRACK_CONFIRM = INT_MAX, NF_IP_PRI_LAST = INT_MAX, }; diff --git a/include/linux/netfilter_ipv4/Kbuild b/include/linux/netfilter_ipv4/Kbuild index c61b8fb1a9e..8ba0c5b72ea 100644 --- a/include/linux/netfilter_ipv4/Kbuild +++ b/include/linux/netfilter_ipv4/Kbuild @@ -5,7 +5,6 @@ header-y += ipt_LOG.h header-y += ipt_REJECT.h header-y += ipt_TTL.h header-y += ipt_ULOG.h -header-y += ipt_addrtype.h header-y += ipt_ah.h header-y += ipt_ecn.h header-y += ipt_ttl.h diff --git a/include/linux/netfilter_ipv4/ipt_addrtype.h b/include/linux/netfilter_ipv4/ipt_addrtype.h deleted file mode 100644 index 0da42237c8d..00000000000 --- a/include/linux/netfilter_ipv4/ipt_addrtype.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef _IPT_ADDRTYPE_H -#define _IPT_ADDRTYPE_H - -#include <linux/types.h> - -enum { - IPT_ADDRTYPE_INVERT_SOURCE = 0x0001, - IPT_ADDRTYPE_INVERT_DEST = 0x0002, - IPT_ADDRTYPE_LIMIT_IFACE_IN = 0x0004, - IPT_ADDRTYPE_LIMIT_IFACE_OUT = 0x0008, -}; - -struct ipt_addrtype_info_v1 { - __u16 source; /* source-type mask */ - __u16 dest; /* dest-type mask */ - __u32 flags; -}; - -/* revision 0 */ -struct ipt_addrtype_info { - __u16 source; /* source-type mask */ - __u16 dest; /* dest-type mask */ - __u32 invert_source; - __u32 invert_dest; -}; - -#endif diff --git a/include/linux/netfilter_ipv6.h b/include/linux/netfilter_ipv6.h index 57c025127f1..7c8a513ce7a 100644 --- a/include/linux/netfilter_ipv6.h +++ b/include/linux/netfilter_ipv6.h @@ -71,6 +71,7 @@ enum nf_ip6_hook_priorities { NF_IP6_PRI_SECURITY = 50, NF_IP6_PRI_NAT_SRC = 100, NF_IP6_PRI_SELINUX_LAST = 225, + NF_IP6_PRI_CONNTRACK_HELPER = 300, NF_IP6_PRI_LAST = INT_MAX, }; diff --git a/include/linux/netlink.h b/include/linux/netlink.h index 0f628ffa420..f74dd133788 100644 --- a/include/linux/netlink.h +++ b/include/linux/netlink.h @@ -174,11 +174,17 @@ struct netlink_skb_parms { extern void netlink_table_grab(void); extern void netlink_table_ungrab(void); -extern struct sock *netlink_kernel_create(struct net *net, - int unit,unsigned int groups, - void (*input)(struct sk_buff *skb), - struct mutex *cb_mutex, - struct module *module); +/* optional Netlink kernel configuration parameters */ +struct netlink_kernel_cfg { + unsigned int groups; + void (*input)(struct sk_buff *skb); + struct mutex *cb_mutex; + void (*bind)(int group); +}; + +extern struct sock *netlink_kernel_create(struct net *net, int unit, + struct module *module, + struct netlink_kernel_cfg *cfg); extern void netlink_kernel_release(struct sock *sk); extern int __netlink_change_ngroups(struct sock *sk, unsigned int groups); extern int netlink_change_ngroups(struct sock *sk, unsigned int groups); @@ -241,14 +247,6 @@ struct netlink_notify { struct nlmsghdr * __nlmsg_put(struct sk_buff *skb, u32 pid, u32 seq, int type, int len, int flags); -#define NLMSG_NEW(skb, pid, seq, type, len, flags) \ -({ if (unlikely(skb_tailroom(skb) < (int)NLMSG_SPACE(len))) \ - goto nlmsg_failure; \ - __nlmsg_put(skb, pid, seq, type, len, flags); }) - -#define NLMSG_PUT(skb, pid, seq, type, len) \ - NLMSG_NEW(skb, pid, seq, type, len, 0) - struct netlink_dump_control { int (*dump)(struct sk_buff *skb, struct netlink_callback *); int (*done)(struct netlink_callback*); diff --git a/include/linux/netpoll.h b/include/linux/netpoll.h index 5dfa091c334..28f5389c924 100644 --- a/include/linux/netpoll.h +++ b/include/linux/netpoll.h @@ -43,7 +43,7 @@ struct netpoll_info { void netpoll_send_udp(struct netpoll *np, const char *msg, int len); void netpoll_print_options(struct netpoll *np); int netpoll_parse_options(struct netpoll *np, char *opt); -int __netpoll_setup(struct netpoll *np); +int __netpoll_setup(struct netpoll *np, struct net_device *ndev); int netpoll_setup(struct netpoll *np); int netpoll_trap(void); void netpoll_set_trap(int trap); diff --git a/include/linux/nfc.h b/include/linux/nfc.h index 0ae9b5857c8..6189f27e305 100644 --- a/include/linux/nfc.h +++ b/include/linux/nfc.h @@ -56,6 +56,10 @@ * %NFC_ATTR_PROTOCOLS) * @NFC_EVENT_DEVICE_REMOVED: event emitted when a device is removed * (it sends %NFC_ATTR_DEVICE_INDEX) + * @NFC_EVENT_TM_ACTIVATED: event emitted when the adapter is activated in + * target mode. + * @NFC_EVENT_DEVICE_DEACTIVATED: event emitted when the adapter is deactivated + * from target mode. */ enum nfc_commands { NFC_CMD_UNSPEC, @@ -71,6 +75,8 @@ enum nfc_commands { NFC_EVENT_DEVICE_ADDED, NFC_EVENT_DEVICE_REMOVED, NFC_EVENT_TARGET_LOST, + NFC_EVENT_TM_ACTIVATED, + NFC_EVENT_TM_DEACTIVATED, /* private: internal use only */ __NFC_CMD_AFTER_LAST }; @@ -94,6 +100,8 @@ enum nfc_commands { * @NFC_ATTR_TARGET_SENSF_RES: NFC-F targets extra information, max 18 bytes * @NFC_ATTR_COMM_MODE: Passive or active mode * @NFC_ATTR_RF_MODE: Initiator or target + * @NFC_ATTR_IM_PROTOCOLS: Initiator mode protocols to poll for + * @NFC_ATTR_TM_PROTOCOLS: Target mode protocols to listen for */ enum nfc_attrs { NFC_ATTR_UNSPEC, @@ -109,6 +117,8 @@ enum nfc_attrs { NFC_ATTR_COMM_MODE, NFC_ATTR_RF_MODE, NFC_ATTR_DEVICE_POWERED, + NFC_ATTR_IM_PROTOCOLS, + NFC_ATTR_TM_PROTOCOLS, /* private: internal use only */ __NFC_ATTR_AFTER_LAST }; @@ -118,6 +128,7 @@ enum nfc_attrs { #define NFC_NFCID1_MAXSIZE 10 #define NFC_SENSB_RES_MAXSIZE 12 #define NFC_SENSF_RES_MAXSIZE 18 +#define NFC_GB_MAXSIZE 48 /* NFC protocols */ #define NFC_PROTO_JEWEL 1 @@ -125,8 +136,9 @@ enum nfc_attrs { #define NFC_PROTO_FELICA 3 #define NFC_PROTO_ISO14443 4 #define NFC_PROTO_NFC_DEP 5 +#define NFC_PROTO_ISO14443_B 6 -#define NFC_PROTO_MAX 6 +#define NFC_PROTO_MAX 7 /* NFC communication modes */ #define NFC_COMM_ACTIVE 0 @@ -135,13 +147,15 @@ enum nfc_attrs { /* NFC RF modes */ #define NFC_RF_INITIATOR 0 #define NFC_RF_TARGET 1 +#define NFC_RF_NONE 2 /* NFC protocols masks used in bitsets */ -#define NFC_PROTO_JEWEL_MASK (1 << NFC_PROTO_JEWEL) -#define NFC_PROTO_MIFARE_MASK (1 << NFC_PROTO_MIFARE) -#define NFC_PROTO_FELICA_MASK (1 << NFC_PROTO_FELICA) -#define NFC_PROTO_ISO14443_MASK (1 << NFC_PROTO_ISO14443) -#define NFC_PROTO_NFC_DEP_MASK (1 << NFC_PROTO_NFC_DEP) +#define NFC_PROTO_JEWEL_MASK (1 << NFC_PROTO_JEWEL) +#define NFC_PROTO_MIFARE_MASK (1 << NFC_PROTO_MIFARE) +#define NFC_PROTO_FELICA_MASK (1 << NFC_PROTO_FELICA) +#define NFC_PROTO_ISO14443_MASK (1 << NFC_PROTO_ISO14443) +#define NFC_PROTO_NFC_DEP_MASK (1 << NFC_PROTO_NFC_DEP) +#define NFC_PROTO_ISO14443_B_MASK (1 << NFC_PROTO_ISO14443_B) struct sockaddr_nfc { sa_family_t sa_family; diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index a6959f72745..2f387880640 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -170,6 +170,8 @@ * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, * %NL80211_ATTR_AUTH_TYPE and %NL80211_ATTR_INACTIVITY_TIMEOUT. + * The channel to use can be set on the interface or be given using the + * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_CHANNEL_TYPE attrs. * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP @@ -275,6 +277,12 @@ * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to * NL80211_CMD_GET_SURVEY and on the "scan" multicast group) * + * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry, using %NL80211_ATTR_MAC + * (for the BSSID) and %NL80211_ATTR_PMKID. + * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC + * (for the BSSID) and %NL80211_ATTR_PMKID. + * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries. + * * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain * has been changed and provides details of the request information * that caused the change such as who initiated the regulatory request @@ -454,6 +462,10 @@ * the frame. * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for * backward compatibility. + * + * @NL80211_CMD_SET_POWER_SAVE: Set powersave, using %NL80211_ATTR_PS_STATE + * @NL80211_CMD_GET_POWER_SAVE: Get powersave status in %NL80211_ATTR_PS_STATE + * * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command * is used to configure connection quality monitoring notification trigger * levels. @@ -759,6 +771,9 @@ enum nl80211_commands { * @NL80211_ATTR_IFNAME: network interface name * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype * + * @NL80211_ATTR_WDEV: wireless device identifier, used for pseudo-devices + * that don't have a netdev (u64) + * * @NL80211_ATTR_MAC: MAC address (various uses) * * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of @@ -769,6 +784,13 @@ enum nl80211_commands { * section 7.3.2.25.1, e.g. 0x000FAC04) * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and * CCMP keys, each six bytes in little endian + * @NL80211_ATTR_KEY_DEFAULT: Flag attribute indicating the key is default key + * @NL80211_ATTR_KEY_DEFAULT_MGMT: Flag attribute indicating the key is the + * default management key + * @NL80211_ATTR_CIPHER_SUITES_PAIRWISE: For crypto settings for connect or + * other commands, indicates which pairwise cipher suites are used + * @NL80211_ATTR_CIPHER_SUITE_GROUP: For crypto settings for connect or + * other commands, indicates which group cipher suite is used * * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing @@ -1004,6 +1026,8 @@ enum nl80211_commands { * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was * acknowledged by the recipient. * + * @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values. + * * @NL80211_ATTR_CQM: connection quality monitor configuration in a * nested attribute with %NL80211_ATTR_CQM_* sub-attributes. * @@ -1061,7 +1085,7 @@ enum nl80211_commands { * flag isn't set, the frame will be rejected. This is also used as an * nl80211 capability flag. * - * @NL80211_ATTR_BSS_HTOPMODE: HT operation mode (u16) + * @NL80211_ATTR_BSS_HT_OPMODE: HT operation mode (u16) * * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags * attributes, specifying what a key should be set as default as. @@ -1085,10 +1109,10 @@ enum nl80211_commands { * indicate which WoW triggers should be enabled. This is also * used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN * triggers. - + * * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan * cycles, in msecs. - + * * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more * sets of attributes to match during scheduled scans. Only BSSs * that match any of the sets will be reported. These are @@ -1115,7 +1139,7 @@ enum nl80211_commands { * are managed in software: interfaces of these types aren't subject to * any restrictions in their number or combinations. * - * @%NL80211_ATTR_REKEY_DATA: nested attribute containing the information + * @NL80211_ATTR_REKEY_DATA: nested attribute containing the information * necessary for GTK rekeying in the device, see &enum nl80211_rekey_data. * * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan, @@ -1182,7 +1206,6 @@ enum nl80211_commands { * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from * &enum nl80211_feature_flags and is advertised in wiphy information. * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe - * * requests while operating in AP-mode. * This attribute holds a bitmap of the supported protocols for * offloading (see &enum nl80211_probe_resp_offload_support_attr). @@ -1222,6 +1245,12 @@ enum nl80211_commands { * @NL80211_ATTR_BG_SCAN_PERIOD: Background scan period in seconds * or 0 to disable background scan. * + * @NL80211_ATTR_USER_REG_HINT_TYPE: type of regulatory hint passed from + * userspace. If unset it is assumed the hint comes directly from + * a user. If set code could specify exactly what type of source + * was used to provide the hint. For the different types of + * allowed user regulatory hints see nl80211_user_reg_hint_type. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1473,6 +1502,10 @@ enum nl80211_attrs { NL80211_ATTR_BG_SCAN_PERIOD, + NL80211_ATTR_WDEV, + + NL80211_ATTR_USER_REG_HINT_TYPE, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -1520,6 +1553,13 @@ enum nl80211_attrs { #define NL80211_MAX_NR_CIPHER_SUITES 5 #define NL80211_MAX_NR_AKM_SUITES 2 +#define NL80211_MIN_REMAIN_ON_CHANNEL_TIME 10 + +/* default RSSI threshold for scan results if none specified. */ +#define NL80211_SCAN_RSSI_THOLD_OFF -300 + +#define NL80211_CQM_TXE_MAX_INTVL 1800 + /** * enum nl80211_iftype - (virtual) interface types * @@ -1613,12 +1653,20 @@ struct nl80211_sta_flag_update { * * These attribute types are used with %NL80211_STA_INFO_TXRATE * when getting information about the bitrate of a station. + * There are 2 attributes for bitrate, a legacy one that represents + * a 16-bit value, and new one that represents a 32-bit value. + * If the rate value fits into 16 bit, both attributes are reported + * with the same value. If the rate is too high to fit into 16 bits + * (>6.5535Gbps) only 32-bit attribute is included. + * User space tools encouraged to use the 32-bit attribute and fall + * back to the 16-bit one for compatibility with older kernels. * * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s) * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8) * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval + * @NL80211_RATE_INFO_BITRATE32: total bitrate (u32, 100kbit/s) * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined * @__NL80211_RATE_INFO_AFTER_LAST: internal use */ @@ -1628,6 +1676,7 @@ enum nl80211_rate_info { NL80211_RATE_INFO_MCS, NL80211_RATE_INFO_40_MHZ_WIDTH, NL80211_RATE_INFO_SHORT_GI, + NL80211_RATE_INFO_BITRATE32, /* keep last */ __NL80211_RATE_INFO_AFTER_LAST, @@ -1788,6 +1837,9 @@ enum nl80211_mpath_info { * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n + * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as + * defined in 802.11ac + * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined * @__NL80211_BAND_ATTR_AFTER_LAST: internal use */ @@ -1801,6 +1853,9 @@ enum nl80211_band_attr { NL80211_BAND_ATTR_HT_AMPDU_FACTOR, NL80211_BAND_ATTR_HT_AMPDU_DENSITY, + NL80211_BAND_ATTR_VHT_MCS_SET, + NL80211_BAND_ATTR_VHT_CAPA, + /* keep last */ __NL80211_BAND_ATTR_AFTER_LAST, NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1 @@ -1952,6 +2007,8 @@ enum nl80211_reg_rule_attr { * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching, * only report BSS with matching SSID. + * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a + * BSS in scan results. Filtering is turned off if not specified. * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter * attribute number currently defined * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use @@ -1959,7 +2016,8 @@ enum nl80211_reg_rule_attr { enum nl80211_sched_scan_match_attr { __NL80211_SCHED_SCAN_MATCH_ATTR_INVALID, - NL80211_ATTR_SCHED_SCAN_MATCH_SSID, + NL80211_SCHED_SCAN_MATCH_ATTR_SSID, + NL80211_SCHED_SCAN_MATCH_ATTR_RSSI, /* keep last */ __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST, @@ -1967,6 +2025,9 @@ enum nl80211_sched_scan_match_attr { __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1 }; +/* only for backward compatibility */ +#define NL80211_ATTR_SCHED_SCAN_MATCH_SSID NL80211_SCHED_SCAN_MATCH_ATTR_SSID + /** * enum nl80211_reg_rule_flags - regulatory rule flags * @@ -2008,6 +2069,26 @@ enum nl80211_dfs_regions { }; /** + * enum nl80211_user_reg_hint_type - type of user regulatory hint + * + * @NL80211_USER_REG_HINT_USER: a user sent the hint. This is always + * assumed if the attribute is not set. + * @NL80211_USER_REG_HINT_CELL_BASE: the hint comes from a cellular + * base station. Device drivers that have been tested to work + * properly to support this type of hint can enable these hints + * by setting the NL80211_FEATURE_CELL_BASE_REG_HINTS feature + * capability on the struct wiphy. The wireless core will + * ignore all cell base station hints until at least one device + * present has been registered with the wireless core that + * has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a + * supported feature. + */ +enum nl80211_user_reg_hint_type { + NL80211_USER_REG_HINT_USER = 0, + NL80211_USER_REG_HINT_CELL_BASE = 1, +}; + +/** * enum nl80211_survey_info - survey information * * These attribute types are used with %NL80211_ATTR_SURVEY_INFO @@ -2086,78 +2167,91 @@ enum nl80211_mntr_flags { * @__NL80211_MESHCONF_INVALID: internal use * * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in - * millisecond units, used by the Peer Link Open message + * millisecond units, used by the Peer Link Open message * * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in - * millisecond units, used by the peer link management to close a peer link + * millisecond units, used by the peer link management to close a peer link * * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in - * millisecond units + * millisecond units * * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed - * on this mesh interface + * on this mesh interface * * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link - * open retries that can be sent to establish a new peer link instance in a - * mesh + * open retries that can be sent to establish a new peer link instance in a + * mesh * * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh - * point. + * point. * * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically - * open peer links when we detect compatible mesh peers. + * open peer links when we detect compatible mesh peers. * * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames - * containing a PREQ that an MP can send to a particular destination (path - * target) + * containing a PREQ that an MP can send to a particular destination (path + * target) * * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths - * (in milliseconds) + * (in milliseconds) * * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait - * until giving up on a path discovery (in milliseconds) + * until giving up on a path discovery (in milliseconds) * * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh - * points receiving a PREQ shall consider the forwarding information from the - * root to be valid. (TU = time unit) + * points receiving a PREQ shall consider the forwarding information from + * the root to be valid. (TU = time unit) * * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in - * TUs) during which an MP can send only one action frame containing a PREQ - * reference element + * TUs) during which an MP can send only one action frame containing a PREQ + * reference element * * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs) - * that it takes for an HWMP information element to propagate across the mesh + * that it takes for an HWMP information element to propagate across the + * mesh * * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not * * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a - * source mesh point for path selection elements. + * source mesh point for path selection elements. * * @NL80211_MESHCONF_HWMP_RANN_INTERVAL: The interval of time (in TUs) between - * root announcements are transmitted. + * root announcements are transmitted. * * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has - * access to a broader network beyond the MBSS. This is done via Root - * Announcement frames. + * access to a broader network beyond the MBSS. This is done via Root + * Announcement frames. * * @NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL: The minimum interval of time (in - * TUs) during which a mesh STA can send only one Action frame containing a - * PERR element. + * TUs) during which a mesh STA can send only one Action frame containing a + * PERR element. * * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding - * or forwarding entity (default is TRUE - forwarding entity) + * or forwarding entity (default is TRUE - forwarding entity) * * @NL80211_MESHCONF_RSSI_THRESHOLD: RSSI threshold in dBm. This specifies the - * threshold for average signal strength of candidate station to establish - * a peer link. - * - * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute + * threshold for average signal strength of candidate station to establish + * a peer link. * * @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors - * to synchronize to for 11s default synchronization method (see 11C.12.2.2) + * to synchronize to for 11s default synchronization method + * (see 11C.12.2.2) * * @NL80211_MESHCONF_HT_OPMODE: set mesh HT protection mode. * + * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute + * + * @NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT: The time (in TUs) for + * which mesh STAs receiving a proactive PREQ shall consider the forwarding + * information to the root mesh STA to be valid. + * + * @NL80211_MESHCONF_HWMP_ROOT_INTERVAL: The interval of time (in TUs) between + * proactive PREQs are transmitted. + * + * @NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL: The minimum interval of time + * (in TUs) during which a mesh STA can send only one Action frame + * containing a PREQ element for root path confirmation. + * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use */ enum nl80211_meshconf_params { @@ -2184,6 +2278,9 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_RSSI_THRESHOLD, NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR, NL80211_MESHCONF_HT_OPMODE, + NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, + NL80211_MESHCONF_HWMP_ROOT_INTERVAL, + NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, /* keep last */ __NL80211_MESHCONF_ATTR_AFTER_LAST, @@ -2199,34 +2296,36 @@ enum nl80211_meshconf_params { * @__NL80211_MESH_SETUP_INVALID: Internal use * * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a - * vendor specific path selection algorithm or disable it to use the default - * HWMP. + * vendor specific path selection algorithm or disable it to use the + * default HWMP. * * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a - * vendor specific path metric or disable it to use the default Airtime - * metric. + * vendor specific path metric or disable it to use the default Airtime + * metric. * * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a - * robust security network ie, or a vendor specific information element that - * vendors will use to identify the path selection methods and metrics in use. + * robust security network ie, or a vendor specific information element + * that vendors will use to identify the path selection methods and + * metrics in use. * * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication - * daemon will be authenticating mesh candidates. + * daemon will be authenticating mesh candidates. * * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication - * daemon will be securing peer link frames. AMPE is a secured version of Mesh - * Peering Management (MPM) and is implemented with the assistance of a - * userspace daemon. When this flag is set, the kernel will send peer - * management frames to a userspace daemon that will implement AMPE - * functionality (security capabilities selection, key confirmation, and key - * management). When the flag is unset (default), the kernel can autonomously - * complete (unsecured) mesh peering without the need of a userspace daemon. - * - * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number + * daemon will be securing peer link frames. AMPE is a secured version of + * Mesh Peering Management (MPM) and is implemented with the assistance of + * a userspace daemon. When this flag is set, the kernel will send peer + * management frames to a userspace daemon that will implement AMPE + * functionality (security capabilities selection, key confirmation, and + * key management). When the flag is unset (default), the kernel can + * autonomously complete (unsecured) mesh peering without the need of a + * userspace daemon. * * @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a - * vendor specific synchronization method or disable it to use the default - * neighbor offset synchronization + * vendor specific synchronization method or disable it to use the default + * neighbor offset synchronization + * + * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number * * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use */ @@ -2490,12 +2589,19 @@ enum nl80211_tx_rate_attributes { * enum nl80211_band - Frequency band * @NL80211_BAND_2GHZ: 2.4 GHz ISM band * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz) + * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz) */ enum nl80211_band { NL80211_BAND_2GHZ, NL80211_BAND_5GHZ, + NL80211_BAND_60GHZ, }; +/** + * enum nl80211_ps_state - powersave state + * @NL80211_PS_DISABLED: powersave is disabled + * @NL80211_PS_ENABLED: powersave is enabled + */ enum nl80211_ps_state { NL80211_PS_DISABLED, NL80211_PS_ENABLED, @@ -2513,6 +2619,17 @@ enum nl80211_ps_state { * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many * consecutive packets were not acknowledged by the peer + * @NL80211_ATTR_CQM_TXE_RATE: TX error rate in %. Minimum % of TX failures + * during the given %NL80211_ATTR_CQM_TXE_INTVL before an + * %NL80211_CMD_NOTIFY_CQM with reported %NL80211_ATTR_CQM_TXE_RATE and + * %NL80211_ATTR_CQM_TXE_PKTS is generated. + * @NL80211_ATTR_CQM_TXE_PKTS: number of attempted packets in a given + * %NL80211_ATTR_CQM_TXE_INTVL before %NL80211_ATTR_CQM_TXE_RATE is + * checked. + * @NL80211_ATTR_CQM_TXE_INTVL: interval in seconds. Specifies the periodic + * interval in which %NL80211_ATTR_CQM_TXE_PKTS and + * %NL80211_ATTR_CQM_TXE_RATE must be satisfied before generating an + * %NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting. * @__NL80211_ATTR_CQM_AFTER_LAST: internal * @NL80211_ATTR_CQM_MAX: highest key attribute */ @@ -2522,6 +2639,9 @@ enum nl80211_attr_cqm { NL80211_ATTR_CQM_RSSI_HYST, NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT, NL80211_ATTR_CQM_PKT_LOSS_EVENT, + NL80211_ATTR_CQM_TXE_RATE, + NL80211_ATTR_CQM_TXE_PKTS, + NL80211_ATTR_CQM_TXE_INTVL, /* keep last */ __NL80211_ATTR_CQM_AFTER_LAST, @@ -2534,10 +2654,14 @@ enum nl80211_attr_cqm { * configured threshold * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the * configured threshold + * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: The device experienced beacon loss. + * (Note that deauth/disassoc will still follow if the AP is not + * available. This event might get used as roaming event, etc.) */ enum nl80211_cqm_rssi_threshold_event { NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, + NL80211_CQM_RSSI_BEACON_LOSS_EVENT, }; @@ -2867,11 +2991,15 @@ enum nl80211_ap_sme_features { * @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates. * @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up * the connected inactive stations in AP mode. + * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested + * to work properly to suppport receiving regulatory hints from + * cellular base stations. */ enum nl80211_feature_flags { NL80211_FEATURE_SK_TX_STATUS = 1 << 0, NL80211_FEATURE_HT_IBSS = 1 << 1, NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2, + NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3, }; /** diff --git a/include/linux/nl802154.h b/include/linux/nl802154.h index 5a3db3aa5f1..fd4f2d1cdf6 100644 --- a/include/linux/nl802154.h +++ b/include/linux/nl802154.h @@ -130,18 +130,8 @@ enum { enum { __IEEE802154_DEV_INVALID = -1, - /* TODO: - * Nowadays three device types supported by this stack at linux-zigbee - * project: WPAN = 0, MONITOR = 1 and SMAC = 2. - * - * Since this stack implementation exists many years, it's definitely - * bad idea to change the assigned values due to they are already used - * by third-party userspace software like: iz-tools, wireshark... - * - * Currently only monitor device is added and initialized by '1' for - * compatibility. - */ - IEEE802154_DEV_MONITOR = 1, + IEEE802154_DEV_WPAN, + IEEE802154_DEV_MONITOR, __IEEE802154_DEV_MAX, }; diff --git a/include/linux/phy.h b/include/linux/phy.h index c291cae8ce3..93b3cf77f56 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -243,6 +243,15 @@ enum phy_state { PHY_RESUMING }; +/** + * struct phy_c45_device_ids - 802.3-c45 Device Identifiers + * @devices_in_package: Bit vector of devices present. + * @device_ids: The device identifer for each present device. + */ +struct phy_c45_device_ids { + u32 devices_in_package; + u32 device_ids[8]; +}; /* phy_device: An instance of a PHY * @@ -250,6 +259,8 @@ enum phy_state { * bus: Pointer to the bus this PHY is on * dev: driver model device structure for this PHY * phy_id: UID for this device found during discovery + * c45_ids: 802.3-c45 Device Identifers if is_c45. + * is_c45: Set to true if this phy uses clause 45 addressing. * state: state of the PHY for management purposes * dev_flags: Device-specific flags used by the PHY driver. * addr: Bus address of PHY @@ -285,6 +296,9 @@ struct phy_device { u32 phy_id; + struct phy_c45_device_ids c45_ids; + bool is_c45; + enum phy_state state; u32 dev_flags; @@ -412,6 +426,12 @@ struct phy_driver { /* Clears up any memory if needed */ void (*remove)(struct phy_device *phydev); + /* Returns true if this is a suitable driver for the given + * phydev. If NULL, matching is based on phy_id and + * phy_id_mask. + */ + int (*match_phy_device)(struct phy_device *phydev); + /* Handles ethtool queries for hardware time stamping. */ int (*ts_info)(struct phy_device *phydev, struct ethtool_ts_info *ti); @@ -480,7 +500,9 @@ static inline int phy_write(struct phy_device *phydev, u32 regnum, u16 val) return mdiobus_write(phydev->bus, phydev->addr, regnum, val); } -struct phy_device* get_phy_device(struct mii_bus *bus, int addr); +struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id, + bool is_c45, struct phy_c45_device_ids *c45_ids); +struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45); int phy_device_register(struct phy_device *phy); int phy_init_hw(struct phy_device *phydev); struct phy_device * phy_attach(struct net_device *dev, @@ -511,7 +533,9 @@ int genphy_read_status(struct phy_device *phydev); int genphy_suspend(struct phy_device *phydev); int genphy_resume(struct phy_device *phydev); void phy_driver_unregister(struct phy_driver *drv); +void phy_drivers_unregister(struct phy_driver *drv, int n); int phy_driver_register(struct phy_driver *new_driver); +int phy_drivers_register(struct phy_driver *new_driver, int n); void phy_state_machine(struct work_struct *work); void phy_start_machine(struct phy_device *phydev, void (*handler)(struct net_device *)); @@ -532,6 +556,11 @@ int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask, int (*run)(struct phy_device *)); int phy_scan_fixups(struct phy_device *phydev); +int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable); +int phy_get_eee_err(struct phy_device *phydev); +int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data); +int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data); + int __init mdio_bus_init(void); void mdio_bus_exit(void); diff --git a/include/linux/pkt_cls.h b/include/linux/pkt_cls.h index defbde203d0..082eafaf026 100644 --- a/include/linux/pkt_cls.h +++ b/include/linux/pkt_cls.h @@ -451,8 +451,10 @@ enum { #define TCF_EM_U32 3 #define TCF_EM_META 4 #define TCF_EM_TEXT 5 -#define TCF_EM_VLAN 6 -#define TCF_EM_MAX 6 +#define TCF_EM_VLAN 6 +#define TCF_EM_CANID 7 +#define TCF_EM_IPSET 8 +#define TCF_EM_MAX 8 enum { TCF_EM_PROG_TC diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h index 2c1de8982c8..db71c4ad862 100644 --- a/include/linux/rtnetlink.h +++ b/include/linux/rtnetlink.h @@ -612,12 +612,6 @@ struct tcamsg { #include <linux/mutex.h> #include <linux/netdevice.h> -static __inline__ int rtattr_strcmp(const struct rtattr *rta, const char *str) -{ - int len = strlen(str) + 1; - return len > rta->rta_len || memcmp(RTA_DATA(rta), str, len); -} - extern int rtnetlink_send(struct sk_buff *skb, struct net *net, u32 pid, u32 group, int echo); extern int rtnl_unicast(struct sk_buff *skb, struct net *net, u32 pid); extern void rtnl_notify(struct sk_buff *skb, struct net *net, u32 pid, @@ -625,124 +619,7 @@ extern void rtnl_notify(struct sk_buff *skb, struct net *net, u32 pid, extern void rtnl_set_sk_err(struct net *net, u32 group, int error); extern int rtnetlink_put_metrics(struct sk_buff *skb, u32 *metrics); extern int rtnl_put_cacheinfo(struct sk_buff *skb, struct dst_entry *dst, - u32 id, u32 ts, u32 tsage, long expires, - u32 error); - -extern void __rta_fill(struct sk_buff *skb, int attrtype, int attrlen, const void *data); - -#define RTA_PUT(skb, attrtype, attrlen, data) \ -({ if (unlikely(skb_tailroom(skb) < (int)RTA_SPACE(attrlen))) \ - goto rtattr_failure; \ - __rta_fill(skb, attrtype, attrlen, data); }) - -#define RTA_APPEND(skb, attrlen, data) \ -({ if (unlikely(skb_tailroom(skb) < (int)(attrlen))) \ - goto rtattr_failure; \ - memcpy(skb_put(skb, attrlen), data, attrlen); }) - -#define RTA_PUT_NOHDR(skb, attrlen, data) \ -({ RTA_APPEND(skb, RTA_ALIGN(attrlen), data); \ - memset(skb_tail_pointer(skb) - (RTA_ALIGN(attrlen) - attrlen), 0, \ - RTA_ALIGN(attrlen) - attrlen); }) - -#define RTA_PUT_U8(skb, attrtype, value) \ -({ u8 _tmp = (value); \ - RTA_PUT(skb, attrtype, sizeof(u8), &_tmp); }) - -#define RTA_PUT_U16(skb, attrtype, value) \ -({ u16 _tmp = (value); \ - RTA_PUT(skb, attrtype, sizeof(u16), &_tmp); }) - -#define RTA_PUT_U32(skb, attrtype, value) \ -({ u32 _tmp = (value); \ - RTA_PUT(skb, attrtype, sizeof(u32), &_tmp); }) - -#define RTA_PUT_U64(skb, attrtype, value) \ -({ u64 _tmp = (value); \ - RTA_PUT(skb, attrtype, sizeof(u64), &_tmp); }) - -#define RTA_PUT_SECS(skb, attrtype, value) \ - RTA_PUT_U64(skb, attrtype, (value) / HZ) - -#define RTA_PUT_MSECS(skb, attrtype, value) \ - RTA_PUT_U64(skb, attrtype, jiffies_to_msecs(value)) - -#define RTA_PUT_STRING(skb, attrtype, value) \ - RTA_PUT(skb, attrtype, strlen(value) + 1, value) - -#define RTA_PUT_FLAG(skb, attrtype) \ - RTA_PUT(skb, attrtype, 0, NULL); - -#define RTA_NEST(skb, type) \ -({ struct rtattr *__start = (struct rtattr *)skb_tail_pointer(skb); \ - RTA_PUT(skb, type, 0, NULL); \ - __start; }) - -#define RTA_NEST_END(skb, start) \ -({ (start)->rta_len = skb_tail_pointer(skb) - (unsigned char *)(start); \ - (skb)->len; }) - -#define RTA_NEST_COMPAT(skb, type, attrlen, data) \ -({ struct rtattr *__start = (struct rtattr *)skb_tail_pointer(skb); \ - RTA_PUT(skb, type, attrlen, data); \ - RTA_NEST(skb, type); \ - __start; }) - -#define RTA_NEST_COMPAT_END(skb, start) \ -({ struct rtattr *__nest = (void *)(start) + NLMSG_ALIGN((start)->rta_len); \ - (start)->rta_len = skb_tail_pointer(skb) - (unsigned char *)(start); \ - RTA_NEST_END(skb, __nest); \ - (skb)->len; }) - -#define RTA_NEST_CANCEL(skb, start) \ -({ if (start) \ - skb_trim(skb, (unsigned char *) (start) - (skb)->data); \ - -1; }) - -#define RTA_GET_U8(rta) \ -({ if (!rta || RTA_PAYLOAD(rta) < sizeof(u8)) \ - goto rtattr_failure; \ - *(u8 *) RTA_DATA(rta); }) - -#define RTA_GET_U16(rta) \ -({ if (!rta || RTA_PAYLOAD(rta) < sizeof(u16)) \ - goto rtattr_failure; \ - *(u16 *) RTA_DATA(rta); }) - -#define RTA_GET_U32(rta) \ -({ if (!rta || RTA_PAYLOAD(rta) < sizeof(u32)) \ - goto rtattr_failure; \ - *(u32 *) RTA_DATA(rta); }) - -#define RTA_GET_U64(rta) \ -({ u64 _tmp; \ - if (!rta || RTA_PAYLOAD(rta) < sizeof(u64)) \ - goto rtattr_failure; \ - memcpy(&_tmp, RTA_DATA(rta), sizeof(_tmp)); \ - _tmp; }) - -#define RTA_GET_FLAG(rta) (!!(rta)) - -#define RTA_GET_SECS(rta) ((unsigned long) RTA_GET_U64(rta) * HZ) -#define RTA_GET_MSECS(rta) (msecs_to_jiffies((unsigned long) RTA_GET_U64(rta))) - -static inline struct rtattr * -__rta_reserve(struct sk_buff *skb, int attrtype, int attrlen) -{ - struct rtattr *rta; - int size = RTA_LENGTH(attrlen); - - rta = (struct rtattr*)skb_put(skb, RTA_ALIGN(size)); - rta->rta_type = attrtype; - rta->rta_len = size; - memset(RTA_DATA(rta) + attrlen, 0, RTA_ALIGN(size) - size); - return rta; -} - -#define __RTA_PUT(skb, attrtype, attrlen) \ -({ if (unlikely(skb_tailroom(skb) < (int)RTA_SPACE(attrlen))) \ - goto rtattr_failure; \ - __rta_reserve(skb, attrtype, attrlen); }) + u32 id, long expires, u32 error); extern void rtmsg_ifinfo(int type, struct net_device *dev, unsigned change); @@ -794,13 +671,6 @@ extern void __rtnl_unlock(void); } \ } while(0) -static inline u32 rtm_get_table(struct rtattr **rta, u8 table) -{ - return RTA_GET_U32(rta[RTA_TABLE-1]); -rtattr_failure: - return table; -} - extern int ndo_dflt_fdb_dump(struct sk_buff *skb, struct netlink_callback *cb, struct net_device *dev, diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 642cb7355df..d205c4be7f5 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -1667,6 +1667,22 @@ static inline void skb_orphan(struct sk_buff *skb) } /** + * skb_orphan_frags - orphan the frags contained in a buffer + * @skb: buffer to orphan frags from + * @gfp_mask: allocation mask for replacement pages + * + * For each frag in the SKB which needs a destructor (i.e. has an + * owner) create a copy of that frag and release the original + * page by calling the destructor. + */ +static inline int skb_orphan_frags(struct sk_buff *skb, gfp_t gfp_mask) +{ + if (likely(!(skb_shinfo(skb)->tx_flags & SKBTX_DEV_ZEROCOPY))) + return 0; + return skb_copy_ubufs(skb, gfp_mask); +} + +/** * __skb_queue_purge - empty a list * @list: list to empty * diff --git a/include/linux/snmp.h b/include/linux/snmp.h index 2e68f5ba038..00bc189cb39 100644 --- a/include/linux/snmp.h +++ b/include/linux/snmp.h @@ -208,7 +208,6 @@ enum LINUX_MIB_TCPDSACKOFOSENT, /* TCPDSACKOfoSent */ LINUX_MIB_TCPDSACKRECV, /* TCPDSACKRecv */ LINUX_MIB_TCPDSACKOFORECV, /* TCPDSACKOfoRecv */ - LINUX_MIB_TCPABORTONSYN, /* TCPAbortOnSyn */ LINUX_MIB_TCPABORTONDATA, /* TCPAbortOnData */ LINUX_MIB_TCPABORTONCLOSE, /* TCPAbortOnClose */ LINUX_MIB_TCPABORTONMEMORY, /* TCPAbortOnMemory */ @@ -233,7 +232,13 @@ enum LINUX_MIB_TCPREQQFULLDOCOOKIES, /* TCPReqQFullDoCookies */ LINUX_MIB_TCPREQQFULLDROP, /* TCPReqQFullDrop */ LINUX_MIB_TCPRETRANSFAIL, /* TCPRetransFail */ - LINUX_MIB_TCPRCVCOALESCE, /* TCPRcvCoalesce */ + LINUX_MIB_TCPRCVCOALESCE, /* TCPRcvCoalesce */ + LINUX_MIB_TCPOFOQUEUE, /* TCPOFOQueue */ + LINUX_MIB_TCPOFODROP, /* TCPOFODrop */ + LINUX_MIB_TCPOFOMERGE, /* TCPOFOMerge */ + LINUX_MIB_TCPCHALLENGEACK, /* TCPChallengeACK */ + LINUX_MIB_TCPSYNCHALLENGE, /* TCPSYNChallenge */ + LINUX_MIB_TCPFASTOPENACTIVE, /* TCPFastOpenActive */ __LINUX_MIB_MAX }; diff --git a/include/linux/sock_diag.h b/include/linux/sock_diag.h index db4bae78bda..e3e395acc2f 100644 --- a/include/linux/sock_diag.h +++ b/include/linux/sock_diag.h @@ -18,6 +18,7 @@ enum { SK_MEMINFO_FWD_ALLOC, SK_MEMINFO_WMEM_QUEUED, SK_MEMINFO_OPTMEM, + SK_MEMINFO_BACKLOG, SK_MEMINFO_VARS, }; @@ -43,6 +44,5 @@ void sock_diag_save_cookie(void *sk, __u32 *cookie); int sock_diag_put_meminfo(struct sock *sk, struct sk_buff *skb, int attr); -extern struct sock *sock_diag_nlsk; #endif /* KERNEL */ #endif diff --git a/include/linux/socket.h b/include/linux/socket.h index 25d6322fb63..ba7b2e817cf 100644 --- a/include/linux/socket.h +++ b/include/linux/socket.h @@ -268,6 +268,7 @@ struct ucred { #define MSG_SENDPAGE_NOTLAST 0x20000 /* sendpage() internal : not the last page */ #define MSG_EOF MSG_FIN +#define MSG_FASTOPEN 0x20000000 /* Send data in TCP SYN */ #define MSG_CMSG_CLOEXEC 0x40000000 /* Set close_on_exit for file descriptor received through SCM_RIGHTS */ diff --git a/include/linux/spi/at86rf230.h b/include/linux/spi/at86rf230.h new file mode 100644 index 00000000000..b2b1afbb320 --- /dev/null +++ b/include/linux/spi/at86rf230.h @@ -0,0 +1,31 @@ +/* + * AT86RF230/RF231 driver + * + * Copyright (C) 2009-2012 Siemens AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + * + * Written by: + * Dmitry Eremin-Solenikov <dmitry.baryshkov@siemens.com> + */ +#ifndef AT86RF230_H +#define AT86RF230_H + +struct at86rf230_platform_data { + int rstn; + int slp_tr; + int dig2; +}; + +#endif diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h index bc14bd738ad..bb674c02f30 100644 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -243,6 +243,7 @@ struct ssb_bus_ops { #define SSB_DEV_MINI_MACPHY 0x823 #define SSB_DEV_ARM_1176 0x824 #define SSB_DEV_ARM_7TDMI 0x825 +#define SSB_DEV_ARM_CM3 0x82A /* Vendor-ID values */ #define SSB_VENDOR_BROADCOM 0x4243 diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 5f359dbfcdc..eb125a4c30b 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -243,6 +243,16 @@ static inline unsigned int tcp_optlen(const struct sk_buff *skb) return (tcp_hdr(skb)->doff - 5) * 4; } +/* TCP Fast Open */ +#define TCP_FASTOPEN_COOKIE_MIN 4 /* Min Fast Open Cookie size in bytes */ +#define TCP_FASTOPEN_COOKIE_MAX 16 /* Max Fast Open Cookie size in bytes */ + +/* TCP Fast Open Cookie as stored in memory */ +struct tcp_fastopen_cookie { + s8 len; + u8 val[TCP_FASTOPEN_COOKIE_MAX]; +}; + /* This defines a selective acknowledgement block. */ struct tcp_sack_block_wire { __be32 start_seq; @@ -339,6 +349,9 @@ struct tcp_sock { u32 rcv_tstamp; /* timestamp of last received ACK (for keepalives) */ u32 lsndtime; /* timestamp of last sent data packet (for restart window) */ + struct list_head tsq_node; /* anchor in tsq_tasklet.head list */ + unsigned long tsq_flags; + /* Data for direct copy to user */ struct { struct sk_buff_head prequeue; @@ -373,7 +386,9 @@ struct tcp_sock { unused : 1; u8 repair_queue; u8 do_early_retrans:1,/* Enable RFC5827 early-retransmit */ - early_retrans_delayed:1; /* Delayed ER timer installed */ + early_retrans_delayed:1, /* Delayed ER timer installed */ + syn_data:1, /* SYN includes data */ + syn_fastopen:1; /* SYN includes Fast Open option */ /* RTT measurement */ u32 srtt; /* smoothed round trip time << 3 */ @@ -478,6 +493,9 @@ struct tcp_sock { u32 probe_seq_start; u32 probe_seq_end; } mtu_probe; + u32 mtu_info; /* We received an ICMP_FRAG_NEEDED / ICMPV6_PKT_TOOBIG + * while socket was owned by user. + */ #ifdef CONFIG_TCP_MD5SIG /* TCP AF-Specific parts; only used by MD5 Signature support so far */ @@ -487,6 +505,9 @@ struct tcp_sock { struct tcp_md5sig_info __rcu *md5sig_info; #endif +/* TCP fastopen related information */ + struct tcp_fastopen_request *fastopen_req; + /* When the cookie options are generated and exchanged, then this * object holds a reference to them (cookie_values->kref). Also * contains related tcp_cookie_transactions fields. @@ -494,6 +515,17 @@ struct tcp_sock { struct tcp_cookie_values *cookie_values; }; +enum tsq_flags { + TSQ_THROTTLED, + TSQ_QUEUED, + TCP_TSQ_DEFERRED, /* tcp_tasklet_func() found socket was owned */ + TCP_WRITE_TIMER_DEFERRED, /* tcp_write_timer() found socket was owned */ + TCP_DELACK_TIMER_DEFERRED, /* tcp_delack_timer() found socket was owned */ + TCP_MTU_REDUCED_DEFERRED, /* tcp_v{4|6}_err() could not call + * tcp_v{4|6}_mtu_reduced() + */ +}; + static inline struct tcp_sock *tcp_sk(const struct sock *sk) { return (struct tcp_sock *)sk; @@ -507,7 +539,7 @@ struct tcp_timewait_sock { u32 tw_ts_recent; long tw_ts_recent_stamp; #ifdef CONFIG_TCP_MD5SIG - struct tcp_md5sig_key *tw_md5_key; + struct tcp_md5sig_key *tw_md5_key; #endif /* Few sockets in timewait have cookies; in that case, then this * object holds a reference to them (tw_cookie_values->kref). diff --git a/include/linux/tipc_config.h b/include/linux/tipc_config.h index 9730b0e51e4..c9892842010 100644 --- a/include/linux/tipc_config.h +++ b/include/linux/tipc_config.h @@ -102,8 +102,8 @@ #define TIPC_CMD_SET_LINK_TOL 0x4107 /* tx link_config, rx none */ #define TIPC_CMD_SET_LINK_PRI 0x4108 /* tx link_config, rx none */ #define TIPC_CMD_SET_LINK_WINDOW 0x4109 /* tx link_config, rx none */ -#define TIPC_CMD_SET_LOG_SIZE 0x410A /* tx unsigned, rx none */ -#define TIPC_CMD_DUMP_LOG 0x410B /* tx none, rx ultra_string */ +#define TIPC_CMD_SET_LOG_SIZE 0x410A /* obsoleted */ +#define TIPC_CMD_DUMP_LOG 0x410B /* obsoleted */ #define TIPC_CMD_RESET_LINK_STATS 0x410C /* tx link_name, rx none */ /* diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index 76f439647c4..f87cf622317 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -66,9 +66,8 @@ struct usbnet { # define EVENT_STS_SPLIT 3 # define EVENT_LINK_RESET 4 # define EVENT_RX_PAUSED 5 -# define EVENT_DEV_WAKING 6 -# define EVENT_DEV_ASLEEP 7 -# define EVENT_DEV_OPEN 8 +# define EVENT_DEV_ASLEEP 6 +# define EVENT_DEV_OPEN 7 }; static inline struct usb_driver *driver_of(struct usb_interface *intf) |