Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc device tree description updates from Arnd Bergmann:
 "This branch contains two kinds of updates: Some platforms in the
  process of getting converted to device tree based booting, and the
  platform specific patches necessary for that are included here.

  Other platforms are already converted, so we just need to update the
  actual device tree source files and the binding documents to add
  support for new board and new drivers.

  In the future we will probably separate those into two branches, and
  in the long run, the plan is to move the device tree source files out
  of the kernel repository, but that has to wait until we have completed
  a much larger portion of the binding documents."

Fix up trivial conflicts in arch/arm/mach-imx/clk-imx6q.c due to newly
added clkdev registers next to a few removed unnecessary ones.

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (119 commits)
  ARM: LPC32xx: Add PWM to base dts file
  ARM: EXYNOS: mark the DMA channel binding for SPI as preliminary
  ARM: dts: Add nodes for spi controllers for SAMSUNG EXYNOS5 platforms
  ARM: EXYNOS: Enable platform support for SPI controllers for EXYNOS5
  ARM: EXYNOS: Add spi clock support for EXYNOS5
  ARM: dts: Add nodes for spi controllers for SAMSUNG EXYNOS4 platforms
  ARM: EXYNOS: Enable platform support for SPI controllers for EXYNOX4
  ARM: EXYNOS: Fix the incorrect hierarchy of spi controller bus clock
  ARM: ux500: Remove PMU platform registration when booting with DT
  ARM: ux500: Remove temporary snowball_of_platform_devs enablement structure
  ARM: ux500: Ensure vendor specific properties have the vendor's identifier
  pinctrl: pinctrl-nomadik: Append sleepmode property with vendor specific prefixes
  ARM: ux500: Move rtc-pl031 registration to Device Tree when enabled
  ARM: ux500: Enable the AB8500 RTC for all DT:ed DB8500 based devices
  ARM: ux500: Correctly reference IRQs supplied by the AB8500 from Device Tree
  ARM: ux500: Apply ab8500-debug node do the db8500 DT structure
  ARM: ux500: Add a ab8500-usb Device Tree node for db8500 based devices
  ARM: ux500: Add db8500 Device Tree node for misc/ab8500-pwm
  ARM: ux500: Add db8500 Device Tree node for ab8500-sysctrl
  ARM: ux500: Enable LED heartbeat functionality on Snowbal via DT
  ...

1 files changed, 49 insertions, 0 deletions

diff --git a/include/linux/mxsfb.h b/include/linux/mxsfb.h
new file mode 100644
index 00000000000..f14943d5531
--- /dev/null
+++ b/include/linux/mxsfb.h
@@ -0,0 +1,49 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __LINUX_MXSFB_H
+#define __LINUX_MXSFB_H
+
+#include <linux/fb.h>
+
+#define STMLCDIF_8BIT 1	/** pixel data bus to the display is of 8 bit width */
+#define STMLCDIF_16BIT 0 /** pixel data bus to the display is of 16 bit width */
+#define STMLCDIF_18BIT 2 /** pixel data bus to the display is of 18 bit width */
+#define STMLCDIF_24BIT 3 /** pixel data bus to the display is of 24 bit width */
+
+#define FB_SYNC_DATA_ENABLE_HIGH_ACT	(1 << 6)
+#define FB_SYNC_DOTCLK_FAILING_ACT	(1 << 7) /* failing/negtive edge sampling */
+
+struct mxsfb_platform_data {
+	struct fb_videomode *mode_list;
+	unsigned mode_count;
+
+	unsigned default_bpp;
+
+	unsigned dotclk_delay;	/* refer manual HW_LCDIF_VDCTRL4 register */
+	unsigned ld_intf_width;	/* refer STMLCDIF_* macros */
+
+	unsigned fb_size;	/* Size of the video memory. If zero a
+				 * default will be used
+				 */
+	unsigned long fb_phys;	/* physical address for the video memory. If
+				 * zero the framebuffer memory will be dynamically
+				 * allocated. If specified,fb_size must also be specified.
+				 * fb_phys must be unused by Linux.
+				 */
+};
+
+#endif /* __LINUX_MXSFB_H */