Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6: (199 commits)
  [MTD] NAND: Fix breakage all over the place
  [PATCH] NAND: fix remaining OOB length calculation
  [MTD] NAND Fixup NDFC merge brokeness
  [MTD NAND] S3C2410 driver cleanup
  [MTD NAND] s3c24x0 board: Fix clock handling, ensure proper initialisation.
  [JFFS2] Check CRC32 on dirent and data nodes each time they're read
  [JFFS2] When retiring nextblock, allocate a node_ref for the wasted space
  [JFFS2] Mark XATTR support as experimental, for now
  [JFFS2] Don't trust node headers before the CRC is checked.
  [MTD] Restore MTD_ROM and MTD_RAM types
  [MTD] assume mtd->writesize is 1 for NOR flashes
  [MTD NAND] Fix s3c2410 NAND driver so it at least _looks_ like it compiles
  [MTD] Prepare physmap for 64-bit-resources
  [JFFS2] Fix more breakage caused by janitorial meddling.
  [JFFS2] Remove stray __exit from jffs2_compressors_exit()
  [MTD] Allow alternate JFFS2 mount variant for root filesystem.
  [MTD] Disconnect struct mtd_info from ABI
  [MTD] replace MTD_RAM with MTD_GENERIC_TYPE
  [MTD] replace MTD_ROM with MTD_GENERIC_TYPE
  [MTD] remove a forgotten MTD_XIP
  ...

13 files changed, 417 insertions, 392 deletions

diff --git a/include/linux/jffs2.h b/include/linux/jffs2.h
index cf792bb3c72..c6f70660b37 100644
--- a/include/linux/jffs2.h
+++ b/include/linux/jffs2.h
@@ -65,6 +65,18 @@
 
 #define JFFS2_NODETYPE_SUMMARY (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 6)
 
+#define JFFS2_NODETYPE_XATTR (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 8)
+#define JFFS2_NODETYPE_XREF (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 9)
+
+/* XATTR Related */
+#define JFFS2_XPREFIX_USER		1	/* for "user." */
+#define JFFS2_XPREFIX_SECURITY		2	/* for "security." */
+#define JFFS2_XPREFIX_ACL_ACCESS	3	/* for "system.posix_acl_access" */
+#define JFFS2_XPREFIX_ACL_DEFAULT	4	/* for "system.posix_acl_default" */
+#define JFFS2_XPREFIX_TRUSTED		5	/* for "trusted.*" */
+
+#define JFFS2_ACL_VERSION		0x0001
+
 // Maybe later...
 //#define JFFS2_NODETYPE_CHECKPOINT (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 3)
 //#define JFFS2_NODETYPE_OPTIONS (JFFS2_FEATURE_RWCOMPAT_COPY | JFFS2_NODE_ACCURATE | 4)
@@ -82,11 +94,11 @@
 
 typedef struct {
 	uint32_t v32;
-} __attribute__((packed))  jint32_t;
+} __attribute__((packed)) jint32_t;
 
 typedef struct {
 	uint32_t m;
-} __attribute__((packed))  jmode_t;
+} __attribute__((packed)) jmode_t;
 
 typedef struct {
 	uint16_t v16;
@@ -99,7 +111,7 @@ struct jffs2_unknown_node
 	jint16_t nodetype;
 	jint32_t totlen; /* So we can skip over nodes we don't grok */
 	jint32_t hdr_crc;
-} __attribute__((packed));
+};
 
 struct jffs2_raw_dirent
 {
@@ -117,7 +129,7 @@ struct jffs2_raw_dirent
 	jint32_t node_crc;
 	jint32_t name_crc;
 	uint8_t name[0];
-} __attribute__((packed));
+};
 
 /* The JFFS2 raw inode structure: Used for storage on physical media.  */
 /* The uid, gid, atime, mtime and ctime members could be longer, but
@@ -149,6 +161,32 @@ struct jffs2_raw_inode
 	jint32_t data_crc;   /* CRC for the (compressed) data.  */
 	jint32_t node_crc;   /* CRC for the raw inode (excluding data)  */
 	uint8_t data[0];
+};
+
+struct jffs2_raw_xattr {
+	jint16_t magic;
+	jint16_t nodetype;	/* = JFFS2_NODETYPE_XATTR */
+	jint32_t totlen;
+	jint32_t hdr_crc;
+	jint32_t xid;		/* XATTR identifier number */
+	jint32_t version;
+	uint8_t xprefix;
+	uint8_t name_len;
+	jint16_t value_len;
+	jint32_t data_crc;
+	jint32_t node_crc;
+	uint8_t data[0];
+} __attribute__((packed));
+
+struct jffs2_raw_xref
+{
+	jint16_t magic;
+	jint16_t nodetype;	/* = JFFS2_NODETYPE_XREF */
+	jint32_t totlen;
+	jint32_t hdr_crc;
+	jint32_t ino;		/* inode number */
+	jint32_t xid;		/* XATTR identifier number */
+	jint32_t node_crc;
 } __attribute__((packed));
 
 struct jffs2_raw_summary
@@ -163,14 +201,22 @@ struct jffs2_raw_summary
 	jint32_t sum_crc;	/* summary information crc */
 	jint32_t node_crc; 	/* node crc */
 	jint32_t sum[0]; 	/* inode summary info */
-} __attribute__((packed));
+};
 
 union jffs2_node_union
 {
 	struct jffs2_raw_inode i;
 	struct jffs2_raw_dirent d;
+	struct jffs2_raw_xattr x;
+	struct jffs2_raw_xref r;
 	struct jffs2_raw_summary s;
 	struct jffs2_unknown_node u;
 };
 
+/* Data payload for device nodes. */
+union jffs2_device_node {
+	jint16_t old;
+	jint32_t new;
+};
+
 #endif /* __LINUX_JFFS2_H__ */
diff --git a/include/linux/jffs2_fs_i.h b/include/linux/jffs2_fs_i.h
deleted file mode 100644
index ad565bf9dcc..00000000000
--- a/include/linux/jffs2_fs_i.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* $Id: jffs2_fs_i.h,v 1.19 2005/11/07 11:14:52 gleixner Exp $ */
-
-#ifndef _JFFS2_FS_I
-#define _JFFS2_FS_I
-
-#include <linux/version.h>
-#include <linux/rbtree.h>
-#include <asm/semaphore.h>
-
-struct jffs2_inode_info {
-	/* We need an internal mutex similar to inode->i_mutex.
-	   Unfortunately, we can't used the existing one, because
-	   either the GC would deadlock, or we'd have to release it
-	   before letting GC proceed. Or we'd have to put ugliness
-	   into the GC code so it didn't attempt to obtain the i_mutex
-	   for the inode(s) which are already locked */
-	struct semaphore sem;
-
-	/* The highest (datanode) version number used for this ino */
-	uint32_t highest_version;
-
-	/* List of data fragments which make up the file */
-	struct rb_root fragtree;
-
-	/* There may be one datanode which isn't referenced by any of the
-	   above fragments, if it contains a metadata update but no actual
-	   data - or if this is a directory inode */
-	/* This also holds the _only_ dnode for symlinks/device nodes,
-	   etc. */
-	struct jffs2_full_dnode *metadata;
-
-	/* Directory entries */
-	struct jffs2_full_dirent *dents;
-
-	/* The target path if this is the inode of a symlink */
-	unsigned char *target;
-
-	/* Some stuff we just have to keep in-core at all times, for each inode. */
-	struct jffs2_inode_cache *inocache;
-
-	uint16_t flags;
-	uint8_t usercompr;
-#if !defined (__ECOS)
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,2)
-	struct inode vfs_inode;
-#endif
-#endif
-};
-
-#endif /* _JFFS2_FS_I */
diff --git a/include/linux/jffs2_fs_sb.h b/include/linux/jffs2_fs_sb.h
deleted file mode 100644
index 4bcfb557022..00000000000
--- a/include/linux/jffs2_fs_sb.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/* $Id: jffs2_fs_sb.h,v 1.54 2005/09/21 13:37:34 dedekind Exp $ */
-
-#ifndef _JFFS2_FS_SB
-#define _JFFS2_FS_SB
-
-#include <linux/types.h>
-#include <linux/spinlock.h>
-#include <linux/workqueue.h>
-#include <linux/completion.h>
-#include <asm/semaphore.h>
-#include <linux/timer.h>
-#include <linux/wait.h>
-#include <linux/list.h>
-#include <linux/rwsem.h>
-
-#define JFFS2_SB_FLAG_RO 1
-#define JFFS2_SB_FLAG_SCANNING 2 /* Flash scanning is in progress */
-#define JFFS2_SB_FLAG_BUILDING 4 /* File system building is in progress */
-
-struct jffs2_inodirty;
-
-/* A struct for the overall file system control.  Pointers to
-   jffs2_sb_info structs are named `c' in the source code.
-   Nee jffs_control
-*/
-struct jffs2_sb_info {
-	struct mtd_info *mtd;
-
-	uint32_t highest_ino;
-	uint32_t checked_ino;
-
-	unsigned int flags;
-
-	struct task_struct *gc_task;	/* GC task struct */
-	struct completion gc_thread_start; /* GC thread start completion */
-	struct completion gc_thread_exit; /* GC thread exit completion port */
-
-	struct semaphore alloc_sem;	/* Used to protect all the following
-					   fields, and also to protect against
-					   out-of-order writing of nodes. And GC. */
-	uint32_t cleanmarker_size;	/* Size of an _inline_ CLEANMARKER
-					 (i.e. zero for OOB CLEANMARKER */
-
-	uint32_t flash_size;
-	uint32_t used_size;
-	uint32_t dirty_size;
-	uint32_t wasted_size;
-	uint32_t free_size;
-	uint32_t erasing_size;
-	uint32_t bad_size;
-	uint32_t sector_size;
-	uint32_t unchecked_size;
-
-	uint32_t nr_free_blocks;
-	uint32_t nr_erasing_blocks;
-
-	/* Number of free blocks there must be before we... */
-	uint8_t resv_blocks_write;	/* ... allow a normal filesystem write */
-	uint8_t resv_blocks_deletion;	/* ... allow a normal filesystem deletion */
-	uint8_t resv_blocks_gctrigger;	/* ... wake up the GC thread */
-	uint8_t resv_blocks_gcbad;	/* ... pick a block from the bad_list to GC */
-	uint8_t resv_blocks_gcmerge;	/* ... merge pages when garbage collecting */
-
-	uint32_t nospc_dirty_size;
-
-	uint32_t nr_blocks;
-	struct jffs2_eraseblock *blocks;	/* The whole array of blocks. Used for getting blocks
-						 * from the offset (blocks[ofs / sector_size]) */
-	struct jffs2_eraseblock *nextblock;	/* The block we're currently filling */
-
-	struct jffs2_eraseblock *gcblock;	/* The block we're currently garbage-collecting */
-
-	struct list_head clean_list;		/* Blocks 100% full of clean data */
-	struct list_head very_dirty_list;	/* Blocks with lots of dirty space */
-	struct list_head dirty_list;		/* Blocks with some dirty space */
-	struct list_head erasable_list;		/* Blocks which are completely dirty, and need erasing */
-	struct list_head erasable_pending_wbuf_list;	/* Blocks which need erasing but only after the current wbuf is flushed */
-	struct list_head erasing_list;		/* Blocks which are currently erasing */
-	struct list_head erase_pending_list;	/* Blocks which need erasing now */
-	struct list_head erase_complete_list;	/* Blocks which are erased and need the clean marker written to them */
-	struct list_head free_list;		/* Blocks which are free and ready to be used */
-	struct list_head bad_list;		/* Bad blocks. */
-	struct list_head bad_used_list;		/* Bad blocks with valid data in. */
-
-	spinlock_t erase_completion_lock;	/* Protect free_list and erasing_list
-						   against erase completion handler */
-	wait_queue_head_t erase_wait;		/* For waiting for erases to complete */
-
-	wait_queue_head_t inocache_wq;
-	struct jffs2_inode_cache **inocache_list;
-	spinlock_t inocache_lock;
-
-	/* Sem to allow jffs2_garbage_collect_deletion_dirent to
-	   drop the erase_completion_lock while it's holding a pointer
-	   to an obsoleted node. I don't like this. Alternatives welcomed. */
-	struct semaphore erase_free_sem;
-
-	uint32_t wbuf_pagesize; /* 0 for NOR and other flashes with no wbuf */
-
-#ifdef CONFIG_JFFS2_FS_WRITEBUFFER
-	/* Write-behind buffer for NAND flash */
-	unsigned char *wbuf;
-	uint32_t wbuf_ofs;
-	uint32_t wbuf_len;
-	struct jffs2_inodirty *wbuf_inodes;
-
-	struct rw_semaphore wbuf_sem;	/* Protects the write buffer */
-
-	/* Information about out-of-band area usage... */
-	struct nand_oobinfo *oobinfo;
-	uint32_t badblock_pos;
-	uint32_t fsdata_pos;
-	uint32_t fsdata_len;
-#endif
-
-	struct jffs2_summary *summary;		/* Summary information */
-
-	/* OS-private pointer for getting back to master superblock info */
-	void *os_priv;
-};
-
-#endif /* _JFFS2_FB_SB */
diff --git a/include/linux/module.h b/include/linux/module.h
index eaec13ddd66..b0d44134f3c 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -557,13 +557,4 @@ static inline void module_remove_driver(struct device_driver *driver)
 
 #define __MODULE_STRING(x) __stringify(x)
 
-/* Use symbol_get and symbol_put instead.  You'll thank me. */
-#define HAVE_INTER_MODULE
-extern void __deprecated inter_module_register(const char *,
-		struct module *, const void *);
-extern void __deprecated inter_module_unregister(const char *);
-extern const void * __deprecated inter_module_get_request(const char *,
-		const char *);
-extern void __deprecated inter_module_put(const char *);
-
 #endif /* _LINUX_MODULE_H */
diff --git a/include/linux/mtd/inftl.h b/include/linux/mtd/inftl.h
index d7eaa40e5ab..6977780e548 100644
--- a/include/linux/mtd/inftl.h
+++ b/include/linux/mtd/inftl.h
@@ -46,7 +46,7 @@ struct INFTLrecord {
         unsigned int nb_blocks;		/* number of physical blocks */
         unsigned int nb_boot_blocks;	/* number of blocks used by the bios */
         struct erase_info instr;
-        struct nand_oobinfo oobinfo;
+        struct nand_ecclayout oobinfo;
 };
 
 int INFTL_mount(struct INFTLrecord *s);
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index b6f2fdae65c..e1d2a3d5654 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -56,18 +56,69 @@ struct mtd_erase_region_info {
 	u_int32_t numblocks;		/* Number of blocks of erasesize in this region */
 };
 
+/*
+ * oob operation modes
+ *
+ * MTD_OOB_PLACE:	oob data are placed at the given offset
+ * MTD_OOB_AUTO:	oob data are automatically placed at the free areas
+ *			which are defined by the ecclayout
+ * MTD_OOB_RAW:		mode to read raw data+oob in one chunk. The oob data
+ *			is inserted into the data. Thats a raw image of the
+ *			flash contents.
+ */
+typedef enum {
+	MTD_OOB_PLACE,
+	MTD_OOB_AUTO,
+	MTD_OOB_RAW,
+} mtd_oob_mode_t;
+
+/**
+ * struct mtd_oob_ops - oob operation operands
+ * @mode:	operation mode
+ *
+ * @len:	number of bytes to write/read. When a data buffer is given
+ *		(datbuf != NULL) this is the number of data bytes. When
+ +		no data buffer is available this is the number of oob bytes.
+ *
+ * @retlen:	number of bytes written/read. When a data buffer is given
+ *		(datbuf != NULL) this is the number of data bytes. When
+ +		no data buffer is available this is the number of oob bytes.
+ *
+ * @ooblen:	number of oob bytes per page
+ * @ooboffs:	offset of oob data in the oob area (only relevant when
+ *		mode = MTD_OOB_PLACE)
+ * @datbuf:	data buffer - if NULL only oob data are read/written
+ * @oobbuf:	oob data buffer
+ */
+struct mtd_oob_ops {
+	mtd_oob_mode_t	mode;
+	size_t		len;
+	size_t		retlen;
+	size_t		ooblen;
+	uint32_t	ooboffs;
+	uint8_t		*datbuf;
+	uint8_t		*oobbuf;
+};
+
 struct mtd_info {
 	u_char type;
 	u_int32_t flags;
 	u_int32_t size;	 // Total size of the MTD
 
-	/* "Major" erase size for the device. Naïve users may take this
+	/* "Major" erase size for the device. Naïve users may take this
 	 * to be the only erase size available, or may use the more detailed
 	 * information below if they desire
 	 */
 	u_int32_t erasesize;
+	/* Minimal writable flash unit size. In case of NOR flash it is 1 (even
+	 * though individual bits can be cleared), in case of NAND flash it is
+	 * one NAND page (or half, or one-fourths of it), in case of ECC-ed NOR
+	 * it is of ECC block size, etc. It is illegal to have writesize = 0.
+	 * Any driver registering a struct mtd_info must ensure a writesize of
+	 * 1 or larger.
+	 */
+	u_int32_t writesize;
 
-	u_int32_t oobblock;  // Size of OOB blocks (e.g. 512)
 	u_int32_t oobsize;   // Amount of OOB data per block (e.g. 16)
 	u_int32_t ecctype;
 	u_int32_t eccsize;
@@ -79,7 +130,6 @@ struct mtd_info {
 	 * MTD_PROGRAM_REGIONS flag is set.
 	 * (Maybe we should have an union for those?)
 	 */
-#define MTD_PROGREGION_SIZE(mtd)  (mtd)->oobblock
 #define MTD_PROGREGION_CTRLMODE_VALID(mtd)  (mtd)->oobsize
 #define MTD_PROGREGION_CTRLMODE_INVALID(mtd)  (mtd)->ecctype
 
@@ -87,9 +137,8 @@ struct mtd_info {
 	char *name;
 	int index;
 
-	// oobinfo is a nand_oobinfo structure, which can be set by iotcl (MEMSETOOBINFO)
-	struct nand_oobinfo oobinfo;
-	u_int32_t oobavail;  // Number of bytes in OOB area available for fs
+	/* ecc layout structure pointer - read only ! */
+	struct nand_ecclayout *ecclayout;
 
 	/* Data for variable erase regions. If numeraseregions is zero,
 	 * it means that the whole device has erasesize as given above.
@@ -112,11 +161,10 @@ struct mtd_info {
 	int (*read) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
 	int (*write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
 
-	int (*read_ecc) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel);
-	int (*write_ecc) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel);
-
-	int (*read_oob) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
-	int (*write_oob) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
+	int (*read_oob) (struct mtd_info *mtd, loff_t from,
+			 struct mtd_oob_ops *ops);
+	int (*write_oob) (struct mtd_info *mtd, loff_t to,
+			 struct mtd_oob_ops *ops);
 
 	/*
 	 * Methods to access the protection register area, present in some
@@ -130,17 +178,11 @@ struct mtd_info {
 	int (*write_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
 	int (*lock_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len);
 
-	/* kvec-based read/write methods. We need these especially for NAND flash,
-	   with its limited number of write cycles per erase.
+	/* kvec-based read/write methods.
 	   NB: The 'count' parameter is the number of _vectors_, each of
 	   which contains an (ofs, len) tuple.
 	*/
-	int (*readv) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from, size_t *retlen);
-	int (*readv_ecc) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from,
-		size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
 	int (*writev) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen);
-	int (*writev_ecc) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to,
-		size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
 
 	/* Sync */
 	void (*sync) (struct mtd_info *mtd);
@@ -159,6 +201,9 @@ struct mtd_info {
 
 	struct notifier_block reboot_notifier;  /* default mode before reboot */
 
+	/* ECC status information */
+	struct mtd_ecc_stats ecc_stats;
+
 	void *priv;
 
 	struct module *owner;
@@ -192,20 +237,6 @@ int default_mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
 int default_mtd_readv(struct mtd_info *mtd, struct kvec *vecs,
 		      unsigned long count, loff_t from, size_t *retlen);
 
-#define MTD_ERASE(mtd, args...) (*(mtd->erase))(mtd, args)
-#define MTD_POINT(mtd, a,b,c,d) (*(mtd->point))(mtd, a,b,c, (u_char **)(d))
-#define MTD_UNPOINT(mtd, arg) (*(mtd->unpoint))(mtd, (u_char *)arg)
-#define MTD_READ(mtd, args...) (*(mtd->read))(mtd, args)
-#define MTD_WRITE(mtd, args...) (*(mtd->write))(mtd, args)
-#define MTD_READV(mtd, args...) (*(mtd->readv))(mtd, args)
-#define MTD_WRITEV(mtd, args...) (*(mtd->writev))(mtd, args)
-#define MTD_READECC(mtd, args...) (*(mtd->read_ecc))(mtd, args)
-#define MTD_WRITEECC(mtd, args...) (*(mtd->write_ecc))(mtd, args)
-#define MTD_READOOB(mtd, args...) (*(mtd->read_oob))(mtd, args)
-#define MTD_WRITEOOB(mtd, args...) (*(mtd->write_oob))(mtd, args)
-#define MTD_SYNC(mtd) do { if (mtd->sync) (*(mtd->sync))(mtd);  } while (0)
-
-
 #ifdef CONFIG_MTD_PARTITIONS
 void mtd_erase_callback(struct erase_info *instr);
 #else
@@ -226,7 +257,7 @@ static inline void mtd_erase_callback(struct erase_info *instr)
 
 #ifdef CONFIG_MTD_DEBUG
 #define DEBUG(n, args...)				\
- 	do {						\
+	do {						\
 		if (n <= CONFIG_MTD_DEBUG_VERBOSE)	\
 			printk(KERN_INFO args);		\
 	} while(0)
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index da5e67b3fc7..a30969eb9af 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -11,47 +11,11 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- *  Info:
- *   Contains standard defines and IDs for NAND flash devices
+ * Info:
+ *	Contains standard defines and IDs for NAND flash devices
  *
- *  Changelog:
- *   01-31-2000 DMW     Created
- *   09-18-2000 SJH     Moved structure out of the Disk-On-Chip drivers
- *			so it can be used by other NAND flash device
- *			drivers. I also changed the copyright since none
- *			of the original contents of this file are specific
- *			to DoC devices. David can whack me with a baseball
- *			bat later if I did something naughty.
- *   10-11-2000 SJH     Added private NAND flash structure for driver
- *   10-24-2000 SJH     Added prototype for 'nand_scan' function
- *   10-29-2001 TG	changed nand_chip structure to support
- *			hardwarespecific function for accessing control lines
- *   02-21-2002 TG	added support for different read/write adress and
- *			ready/busy line access function
- *   02-26-2002 TG	added chip_delay to nand_chip structure to optimize
- *			command delay times for different chips
- *   04-28-2002 TG	OOB config defines moved from nand.c to avoid duplicate
- *			defines in jffs2/wbuf.c
- *   08-07-2002 TG	forced bad block location to byte 5 of OOB, even if
- *			CONFIG_MTD_NAND_ECC_JFFS2 is not set
- *   08-10-2002 TG	extensions to nand_chip structure to support HW-ECC
- *
- *   08-29-2002 tglx 	nand_chip structure: data_poi for selecting
- *			internal / fs-driver buffer
- *			support for 6byte/512byte hardware ECC
- *			read_ecc, write_ecc extended for different oob-layout
- *			oob layout selections: NAND_NONE_OOB, NAND_JFFS2_OOB,
- *			NAND_YAFFS_OOB
- *  11-25-2002 tglx	Added Manufacturer code FUJITSU, NATIONAL
- *			Split manufacturer and device ID structures
- *
- *  02-08-2004 tglx 	added option field to nand structure for chip anomalities
- *  05-25-2004 tglx 	added bad block table support, ST-MICRO manufacturer id
- *			update of nand_chip structure description
- *  01-17-2005 dmarlin	added extended commands for AG-AND device and added option
- * 			for BBT_AUTO_REFRESH.
- *  01-20-2005 dmarlin	added optional pointer to hardware specific callback for
- *			extra error status checks.
+ * Changelog:
+ *	See git changelog.
  */
 #ifndef __LINUX_MTD_NAND_H
 #define __LINUX_MTD_NAND_H
@@ -67,10 +31,6 @@ extern int nand_scan (struct mtd_info *mtd, int max_chips);
 /* Free resources held by the NAND device */
 extern void nand_release (struct mtd_info *mtd);
 
-/* Read raw data from the device without ECC */
-extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_t len, size_t ooblen);
-
-
 /* The maximum number of NAND chips in an array */
 #define NAND_MAX_CHIPS		8
 
@@ -79,44 +39,45 @@ extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_
  * adjust this accordingly.
  */
 #define NAND_MAX_OOBSIZE	64
+#define NAND_MAX_PAGESIZE	2048
 
 /*
  * Constants for hardware specific CLE/ALE/NCE function
-*/
+ *
+ * These are bits which can be or'ed to set/clear multiple
+ * bits in one go.
+ */
 /* Select the chip by setting nCE to low */
-#define NAND_CTL_SETNCE 	1
-/* Deselect the chip by setting nCE to high */
-#define NAND_CTL_CLRNCE		2
+#define NAND_NCE		0x01
 /* Select the command latch by setting CLE to high */
-#define NAND_CTL_SETCLE		3
-/* Deselect the command latch by setting CLE to low */
-#define NAND_CTL_CLRCLE		4
+#define NAND_CLE		0x02
 /* Select the address latch by setting ALE to high */
-#define NAND_CTL_SETALE		5
-/* Deselect the address latch by setting ALE to low */
-#define NAND_CTL_CLRALE		6
-/* Set write protection by setting WP to high. Not used! */
-#define NAND_CTL_SETWP		7
-/* Clear write protection by setting WP to low. Not used! */
-#define NAND_CTL_CLRWP		8
+#define NAND_ALE		0x04
+
+#define NAND_CTRL_CLE		(NAND_NCE | NAND_CLE)
+#define NAND_CTRL_ALE		(NAND_NCE | NAND_ALE)
+#define NAND_CTRL_CHANGE	0x80
 
 /*
  * Standard NAND flash commands
  */
 #define NAND_CMD_READ0		0
 #define NAND_CMD_READ1		1
+#define NAND_CMD_RNDOUT		5
 #define NAND_CMD_PAGEPROG	0x10
 #define NAND_CMD_READOOB	0x50
 #define NAND_CMD_ERASE1		0x60
 #define NAND_CMD_STATUS		0x70
 #define NAND_CMD_STATUS_MULTI	0x71
 #define NAND_CMD_SEQIN		0x80
+#define NAND_CMD_RNDIN		0x85
 #define NAND_CMD_READID		0x90
 #define NAND_CMD_ERASE2		0xd0
 #define NAND_CMD_RESET		0xff
 
 /* Extended commands for large page devices */
 #define NAND_CMD_READSTART	0x30
+#define NAND_CMD_RNDOUTSTART	0xE0
 #define NAND_CMD_CACHEDPROG	0x15
 
 /* Extended commands for AG-AND device */
@@ -138,6 +99,8 @@ extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_
 #define NAND_CMD_STATUS_RESET	0x7f
 #define NAND_CMD_STATUS_CLEAR	0xff
 
+#define NAND_CMD_NONE		-1
+
 /* Status bits */
 #define NAND_STATUS_FAIL	0x01
 #define NAND_STATUS_FAIL_N1	0x02
@@ -148,21 +111,12 @@ extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_
 /*
  * Constants for ECC_MODES
  */
-
-/* No ECC. Usage is not recommended ! */
-#define NAND_ECC_NONE		0
-/* Software ECC 3 byte ECC per 256 Byte data */
-#define NAND_ECC_SOFT		1
-/* Hardware ECC 3 byte ECC per 256 Byte data */
-#define NAND_ECC_HW3_256	2
-/* Hardware ECC 3 byte ECC per 512 Byte data */
-#define NAND_ECC_HW3_512	3
-/* Hardware ECC 3 byte ECC per 512 Byte data */
-#define NAND_ECC_HW6_512	4
-/* Hardware ECC 8 byte ECC per 512 Byte data */
-#define NAND_ECC_HW8_512	6
-/* Hardware ECC 12 byte ECC per 2048 Byte data */
-#define NAND_ECC_HW12_2048	7
+typedef enum {
+	NAND_ECC_NONE,
+	NAND_ECC_SOFT,
+	NAND_ECC_HW,
+	NAND_ECC_HW_SYNDROME,
+} nand_ecc_modes_t;
 
 /*
  * Constants for Hardware ECC
@@ -201,6 +155,10 @@ extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_
  * bits from adjacent blocks from 'leaking' in altering data.
  * This happens with the Renesas AG-AND chips, possibly others.  */
 #define BBT_AUTO_REFRESH	0x00000080
+/* Chip does not require ready check on read. True
+ * for all large page devices, as they do not support
+ * autoincrement.*/
+#define NAND_NO_READRDY		0x00000100
 
 /* Options valid for Samsung large page devices */
 #define NAND_SAMSUNG_LP_OPTIONS \
@@ -219,18 +177,12 @@ extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_
 /* Use a flash based bad block table. This option is passed to the
  * default bad block table function. */
 #define NAND_USE_FLASH_BBT	0x00010000
-/* The hw ecc generator provides a syndrome instead a ecc value on read
- * This can only work if we have the ecc bytes directly behind the
- * data bytes. Applies for DOC and AG-AND Renesas HW Reed Solomon generators */
-#define NAND_HWECC_SYNDROME	0x00020000
 /* This option skips the bbt scan during initialization. */
-#define NAND_SKIP_BBTSCAN	0x00040000
+#define NAND_SKIP_BBTSCAN	0x00020000
 
 /* Options set by nand scan */
-/* Nand scan has allocated oob_buf */
-#define NAND_OOBBUF_ALLOC	0x40000000
-/* Nand scan has allocated data_buf */
-#define NAND_DATABUF_ALLOC	0x80000000
+/* Nand scan has allocated controller struct */
+#define NAND_CONTROLLER_ALLOC	0x80000000
 
 
 /*
@@ -264,45 +216,102 @@ struct nand_hw_control {
 };
 
 /**
+ * struct nand_ecc_ctrl - Control structure for ecc
+ * @mode:	ecc mode
+ * @steps:	number of ecc steps per page
+ * @size:	data bytes per ecc step
+ * @bytes:	ecc bytes per step
+ * @total:	total number of ecc bytes per page
+ * @prepad:	padding information for syndrome based ecc generators
+ * @postpad:	padding information for syndrome based ecc generators
+ * @hwctl:	function to control hardware ecc generator. Must only
+ *		be provided if an hardware ECC is available
+ * @calculate:	function for ecc calculation or readback from ecc hardware
+ * @correct:	function for ecc correction, matching to ecc generator (sw/hw)
+ * @read_page:	function to read a page according to the ecc generator requirements
+ * @write_page:	function to write a page according to the ecc generator requirements
+ */
+struct nand_ecc_ctrl {
+	nand_ecc_modes_t	mode;
+	int			steps;
+	int			size;
+	int			bytes;
+	int			total;
+	int			prepad;
+	int			postpad;
+	struct nand_ecclayout	*layout;
+	void			(*hwctl)(struct mtd_info *mtd, int mode);
+	int			(*calculate)(struct mtd_info *mtd,
+					     const uint8_t *dat,
+					     uint8_t *ecc_code);
+	int			(*correct)(struct mtd_info *mtd, uint8_t *dat,
+					   uint8_t *read_ecc,
+					   uint8_t *calc_ecc);
+	int			(*read_page)(struct mtd_info *mtd,
+					     struct nand_chip *chip,
+					     uint8_t *buf);
+	void			(*write_page)(struct mtd_info *mtd,
+					      struct nand_chip *chip,
+					      const uint8_t *buf);
+	int			(*read_oob)(struct mtd_info *mtd,
+					    struct nand_chip *chip,
+					    int page,
+					    int sndcmd);
+	int			(*write_oob)(struct mtd_info *mtd,
+					     struct nand_chip *chip,
+					     int page);
+};
+
+/**
+ * struct nand_buffers - buffer structure for read/write
+ * @ecccalc:	buffer for calculated ecc
+ * @ecccode:	buffer for ecc read from flash
+ * @oobwbuf:	buffer for write oob data
+ * @databuf:	buffer for data - dynamically sized
+ * @oobrbuf:	buffer to read oob data
+ *
+ * Do not change the order of buffers. databuf and oobrbuf must be in
+ * consecutive order.
+ */
+struct nand_buffers {
+	uint8_t	ecccalc[NAND_MAX_OOBSIZE];
+	uint8_t	ecccode[NAND_MAX_OOBSIZE];
+	uint8_t	oobwbuf[NAND_MAX_OOBSIZE];
+	uint8_t databuf[NAND_MAX_PAGESIZE];
+	uint8_t	oobrbuf[NAND_MAX_OOBSIZE];
+};
+
+/**
  * struct nand_chip - NAND Private Flash Chip Data
  * @IO_ADDR_R:		[BOARDSPECIFIC] address to read the 8 I/O lines of the flash device
  * @IO_ADDR_W:		[BOARDSPECIFIC] address to write the 8 I/O lines of the flash device
  * @read_byte:		[REPLACEABLE] read one byte from the chip
- * @write_byte:		[REPLACEABLE] write one byte to the chip
  * @read_word:		[REPLACEABLE] read one word from the chip
- * @write_word:		[REPLACEABLE] write one word to the chip
  * @write_buf:		[REPLACEABLE] write data from the buffer to the chip
  * @read_buf:		[REPLACEABLE] read data from the chip into the buffer
  * @verify_buf:		[REPLACEABLE] verify buffer contents against the chip data
  * @select_chip:	[REPLACEABLE] select chip nr
  * @block_bad:		[REPLACEABLE] check, if the block is bad
  * @block_markbad:	[REPLACEABLE] mark the block bad
- * @hwcontrol:		[BOARDSPECIFIC] hardwarespecific function for accesing control-lines
+ * @cmd_ctrl:		[BOARDSPECIFIC] hardwarespecific funtion for controlling
+ *			ALE/CLE/nCE. Also used to write command and address
  * @dev_ready:		[BOARDSPECIFIC] hardwarespecific function for accesing device ready/busy line
  *			If set to NULL no access to ready/busy is available and the ready/busy information
  *			is read from the chip status register
  * @cmdfunc:		[REPLACEABLE] hardwarespecific function for writing commands to the chip
  * @waitfunc:		[REPLACEABLE] hardwarespecific function for wait on ready
- * @calculate_ecc: 	[REPLACEABLE] function for ecc calculation or readback from ecc hardware
- * @correct_data:	[REPLACEABLE] function for ecc correction, matching to ecc generator (sw/hw)
- * @enable_hwecc:	[BOARDSPECIFIC] function to enable (reset) hardware ecc generator. Must only
- *			be provided if a hardware ECC is available
+ * @ecc:		[BOARDSPECIFIC] ecc control ctructure
  * @erase_cmd:		[INTERN] erase command write function, selectable due to AND support
  * @scan_bbt:		[REPLACEABLE] function to scan bad block table
- * @eccmode:		[BOARDSPECIFIC] mode of ecc, see defines
- * @eccsize: 		[INTERN] databytes used per ecc-calculation
- * @eccbytes: 		[INTERN] number of ecc bytes per ecc-calculation step
- * @eccsteps:		[INTERN] number of ecc calculation steps per page
  * @chip_delay:		[BOARDSPECIFIC] chip dependent delay for transfering data from array to read regs (tR)
- * @chip_lock:		[INTERN] spinlock used to protect access to this structure and the chip
  * @wq:			[INTERN] wait queue to sleep on if a NAND operation is in progress
- * @state: 		[INTERN] the current state of the NAND device
+ * @state:		[INTERN] the current state of the NAND device
  * @page_shift:		[INTERN] number of address bits in a page (column address bits)
  * @phys_erase_shift:	[INTERN] number of address bits in a physical eraseblock
  * @bbt_erase_shift:	[INTERN] number of address bits in a bbt entry
  * @chip_shift:		[INTERN] number of address bits in one chip
- * @data_buf:		[INTERN] internal buffer for one page + oob
- * @oob_buf:		[INTERN] oob buffer for one eraseblock
+ * @datbuf:		[INTERN] internal buffer for one page + oob
+ * @oobbuf:		[INTERN] oob buffer for one eraseblock
  * @oobdirty:		[INTERN] indicates that oob_buf must be reinitialized
  * @data_poi:		[INTERN] pointer to a data buffer
  * @options:		[BOARDSPECIFIC] various chip options. They can partly be set to inform nand_scan about
@@ -312,12 +321,13 @@ struct nand_hw_control {
  * @chipsize:		[INTERN] the size of one chip for multichip arrays
  * @pagemask:		[INTERN] page number mask = number of (pages / chip) - 1
  * @pagebuf:		[INTERN] holds the pagenumber which is currently in data_buf
- * @autooob:		[REPLACEABLE] the default (auto)placement scheme
+ * @ecclayout:		[REPLACEABLE] the default ecc placement scheme
  * @bbt:		[INTERN] bad block table pointer
  * @bbt_td:		[REPLACEABLE] bad block table descriptor for flash lookup
  * @bbt_md:		[REPLACEABLE] bad block table mirror descriptor
  * @badblock_pattern:	[REPLACEABLE] bad block scan pattern used for initial bad block scan
- * @controller:		[OPTIONAL] a pointer to a hardware controller structure which is shared among multiple independend devices
+ * @controller:		[REPLACEABLE] a pointer to a hardware controller structure
+ *			which is shared among multiple independend devices
  * @priv:		[OPTIONAL] pointer to private chip date
  * @errstat:		[OPTIONAL] hardware specific function to perform additional error status checks
  *			(determine if errors are correctable)
@@ -325,58 +335,57 @@ struct nand_hw_control {
 
 struct nand_chip {
 	void  __iomem	*IO_ADDR_R;
-	void  __iomem 	*IO_ADDR_W;
+	void  __iomem	*IO_ADDR_W;
 
-	u_char		(*read_byte)(struct mtd_info *mtd);
-	void		(*write_byte)(struct mtd_info *mtd, u_char byte);
+	uint8_t		(*read_byte)(struct mtd_info *mtd);
 	u16		(*read_word)(struct mtd_info *mtd);
-	void		(*write_word)(struct mtd_info *mtd, u16 word);
-
-	void		(*write_buf)(struct mtd_info *mtd, const u_char *buf, int len);
-	void		(*read_buf)(struct mtd_info *mtd, u_char *buf, int len);
-	int		(*verify_buf)(struct mtd_info *mtd, const u_char *buf, int len);
+	void		(*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
+	void		(*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
+	int		(*verify_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
 	void		(*select_chip)(struct mtd_info *mtd, int chip);
 	int		(*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip);
 	int		(*block_markbad)(struct mtd_info *mtd, loff_t ofs);
-	void 		(*hwcontrol)(struct mtd_info *mtd, int cmd);
-	int  		(*dev_ready)(struct mtd_info *mtd);
-	void 		(*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, int page_addr);
-	int 		(*waitfunc)(struct mtd_info *mtd, struct nand_chip *this, int state);
-	int		(*calculate_ecc)(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code);
-	int 		(*correct_data)(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc);
-	void		(*enable_hwecc)(struct mtd_info *mtd, int mode);
+	void		(*cmd_ctrl)(struct mtd_info *mtd, int dat,
+				    unsigned int ctrl);
+	int		(*dev_ready)(struct mtd_info *mtd);
+	void		(*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, int page_addr);
+	int		(*waitfunc)(struct mtd_info *mtd, struct nand_chip *this);
 	void		(*erase_cmd)(struct mtd_info *mtd, int page);
 	int		(*scan_bbt)(struct mtd_info *mtd);
-	int		eccmode;
-	int		eccsize;
-	int		eccbytes;
-	int		eccsteps;
-	int 		chip_delay;
-	spinlock_t	chip_lock;
-	wait_queue_head_t wq;
-	nand_state_t 	state;
-	int 		page_shift;
+	int		(*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state, int status, int page);
+
+	int		chip_delay;
+	unsigned int	options;
+
+	int		page_shift;
 	int		phys_erase_shift;
 	int		bbt_erase_shift;
 	int		chip_shift;
-	u_char 		*data_buf;
-	u_char		*oob_buf;
-	int		oobdirty;
-	u_char		*data_poi;
-	unsigned int	options;
-	int		badblockpos;
 	int		numchips;
 	unsigned long	chipsize;
 	int		pagemask;
 	int		pagebuf;
-	struct nand_oobinfo	*autooob;
+	int		badblockpos;
+
+	nand_state_t	state;
+
+	uint8_t		*oob_poi;
+	struct nand_hw_control  *controller;
+	struct nand_ecclayout	*ecclayout;
+
+	struct nand_ecc_ctrl ecc;
+	struct nand_buffers buffers;
+	struct nand_hw_control hwcontrol;
+
+	struct mtd_oob_ops ops;
+
 	uint8_t		*bbt;
 	struct nand_bbt_descr	*bbt_td;
 	struct nand_bbt_descr	*bbt_md;
+
 	struct nand_bbt_descr	*badblock_pattern;
-	struct nand_hw_control  *controller;
+
 	void		*priv;
-	int		(*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state, int status, int page);
 };
 
 /*
@@ -388,19 +397,19 @@ struct nand_chip {
 #define NAND_MFR_NATIONAL	0x8f
 #define NAND_MFR_RENESAS	0x07
 #define NAND_MFR_STMICRO	0x20
-#define NAND_MFR_HYNIX          0xad
+#define NAND_MFR_HYNIX		0xad
 
 /**
  * struct nand_flash_dev - NAND Flash Device ID Structure
  *
- * @name:  	Identify the device type
- * @id:   	device ID code
- * @pagesize:  	Pagesize in bytes. Either 256 or 512 or 0
+ * @name:	Identify the device type
+ * @id:		device ID code
+ * @pagesize:	Pagesize in bytes. Either 256 or 512 or 0
  *		If the pagesize is 0, then the real pagesize
  *		and the eraseize are determined from the
  *		extended id bytes in the chip
- * @erasesize: 	Size of an erase block in the flash device.
- * @chipsize:  	Total chipsize in Mega Bytes
+ * @erasesize:	Size of an erase block in the flash device.
+ * @chipsize:	Total chipsize in Mega Bytes
  * @options:	Bitfield to store chip relevant options
  */
 struct nand_flash_dev {
@@ -415,7 +424,7 @@ struct nand_flash_dev {
 /**
  * struct nand_manufacturers - NAND Flash Manufacturer ID Structure
  * @name:	Manufacturer name
- * @id: 	manufacturer ID code of device.
+ * @id:		manufacturer ID code of device.
 */
 struct nand_manufacturers {
 	int id;
@@ -455,7 +464,7 @@ struct nand_bbt_descr {
 	int	veroffs;
 	uint8_t	version[NAND_MAX_CHIPS];
 	int	len;
-	int 	maxblocks;
+	int	maxblocks;
 	int	reserved_block_code;
 	uint8_t	*pattern;
 };
@@ -494,14 +503,14 @@ struct nand_bbt_descr {
 /* The maximum number of blocks to scan for a bbt */
 #define NAND_BBT_SCAN_MAXBLOCKS	4
 
-extern int nand_scan_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd);
-extern int nand_update_bbt (struct mtd_info *mtd, loff_t offs);
-extern int nand_default_bbt (struct mtd_info *mtd);
-extern int nand_isbad_bbt (struct mtd_info *mtd, loff_t offs, int allowbbt);
-extern int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbbt);
-extern int nand_do_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
-                             size_t * retlen, u_char * buf, u_char * oob_buf,
-                             struct nand_oobinfo *oobsel, int flags);
+extern int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd);
+extern int nand_update_bbt(struct mtd_info *mtd, loff_t offs);
+extern int nand_default_bbt(struct mtd_info *mtd);
+extern int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt);
+extern int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
+			   int allowbbt);
+extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len,
+			size_t * retlen, uint8_t * buf);
 
 /*
 * Constants for oob configuration
@@ -509,4 +518,53 @@ extern int nand_do_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
 #define NAND_SMALL_BADBLOCK_POS		5
 #define NAND_LARGE_BADBLOCK_POS		0
 
+/**
+ * struct platform_nand_chip - chip level device structure
+ *
+ * @nr_chips:		max. number of chips to scan for
+ * @chip_offs:		chip number offset
+ * @nr_partitions:	number of partitions pointed to by partitions (or zero)
+ * @partitions:		mtd partition list
+ * @chip_delay:		R/B delay value in us
+ * @options:		Option flags, e.g. 16bit buswidth
+ * @ecclayout:		ecc layout info structure
+ * @priv:		hardware controller specific settings
+ */
+struct platform_nand_chip {
+	int			nr_chips;
+	int			chip_offset;
+	int			nr_partitions;
+	struct mtd_partition	*partitions;
+	struct nand_ecclayout	*ecclayout;
+	int			chip_delay;
+	unsigned int		options;
+	void			*priv;
+};
+
+/**
+ * struct platform_nand_ctrl - controller level device structure
+ *
+ * @hwcontrol:		platform specific hardware control structure
+ * @dev_ready:		platform specific function to read ready/busy pin
+ * @select_chip:	platform specific chip select function
+ * @priv_data:		private data to transport driver specific settings
+ *
+ * All fields are optional and depend on the hardware driver requirements
+ */
+struct platform_nand_ctrl {
+	void		(*hwcontrol)(struct mtd_info *mtd, int cmd);
+	int		(*dev_ready)(struct mtd_info *mtd);
+	void		(*select_chip)(struct mtd_info *mtd, int chip);
+	void		*priv;
+};
+
+/* Some helpers to access the data structures */
+static inline
+struct platform_nand_chip *get_platform_nandchip(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+
+	return chip->priv;
+}
+
 #endif /* __LINUX_MTD_NAND_H */
diff --git a/include/linux/mtd/ndfc.h b/include/linux/mtd/ndfc.h
new file mode 100644
index 00000000000..d0558a98262
--- /dev/null
+++ b/include/linux/mtd/ndfc.h
@@ -0,0 +1,67 @@
+/*
+ *  linux/include/linux/mtd/ndfc.h
+ *
+ *  Copyright (c) 2006 Thomas Gleixner <tglx@linutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Info:
+ *   Contains defines, datastructures for ndfc nand controller
+ *
+ */
+#ifndef __LINUX_MTD_NDFC_H
+#define __LINUX_MTD_NDFC_H
+
+/* NDFC Register definitions */
+#define NDFC_CMD		0x00
+#define NDFC_ALE		0x04
+#define NDFC_DATA		0x08
+#define NDFC_ECC		0x10
+#define NDFC_BCFG0		0x30
+#define NDFC_BCFG1		0x34
+#define NDFC_BCFG2		0x38
+#define NDFC_BCFG3		0x3c
+#define NDFC_CCR		0x40
+#define NDFC_STAT		0x44
+#define NDFC_HWCTL		0x48
+#define NDFC_REVID		0x50
+
+#define NDFC_STAT_IS_READY	0x01000000
+
+#define NDFC_CCR_RESET_CE	0x80000000 /* CE Reset */
+#define NDFC_CCR_RESET_ECC	0x40000000 /* ECC Reset */
+#define NDFC_CCR_RIE		0x20000000 /* Interrupt Enable on Device Rdy */
+#define NDFC_CCR_REN		0x10000000 /* Enable wait for Rdy in LinearR */
+#define NDFC_CCR_ROMEN		0x08000000 /* Enable ROM In LinearR */
+#define NDFC_CCR_ARE		0x04000000 /* Auto-Read Enable */
+#define NDFC_CCR_BS(x)		(((x) & 0x3) << 24) /* Select Bank on CE[x] */
+#define NDFC_CCR_BS_MASK	0x03000000 /* Select Bank */
+#define NDFC_CCR_ARAC0		0x00000000 /* 3 Addr, 1 Col 2 Row 512b page */
+#define NDFC_CCR_ARAC1		0x00001000 /* 4 Addr, 1 Col 3 Row 512b page */
+#define NDFC_CCR_ARAC2		0x00002000 /* 4 Addr, 2 Col 2 Row 2K page */
+#define NDFC_CCR_ARAC3		0x00003000 /* 5 Addr, 2 Col 3 Row 2K page */
+#define NDFC_CCR_ARAC_MASK	0x00003000 /* Auto-Read mode Addr Cycles */
+#define NDFC_CCR_RPG		0x0000C000 /* Auto-Read Page */
+#define NDFC_CCR_EBCC		0x00000004 /* EBC Configuration Completed */
+#define NDFC_CCR_DHC		0x00000002 /* Direct Hardware Control Enable */
+
+#define NDFC_BxCFG_EN		0x80000000 /* Bank Enable */
+#define NDFC_BxCFG_CED		0x40000000 /* nCE Style */
+#define NDFC_BxCFG_SZ_MASK	0x08000000 /* Bank Size */
+#define NDFC_BxCFG_SZ_8BIT	0x00000000 /* 8bit */
+#define NDFC_BxCFG_SZ_16BIT	0x08000000 /* 16bit */
+
+#define NDFC_MAX_BANKS		4
+
+struct ndfc_controller_settings {
+	uint32_t	ccr_settings;
+	uint64_t	ndfc_erpn;
+};
+
+struct ndfc_chip_settings {
+	uint32_t	bank_settings;
+};
+
+#endif
diff --git a/include/linux/mtd/nftl.h b/include/linux/mtd/nftl.h
index d35d2c21ff3..bcf2fb3fa4a 100644
--- a/include/linux/mtd/nftl.h
+++ b/include/linux/mtd/nftl.h
@@ -37,7 +37,7 @@ struct NFTLrecord {
         unsigned int nb_blocks;		/* number of physical blocks */
         unsigned int nb_boot_blocks;	/* number of blocks used by the bios */
         struct erase_info instr;
-	struct nand_oobinfo oobinfo;
+	struct nand_ecclayout oobinfo;
 };
 
 int NFTL_mount(struct NFTLrecord *s);
diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h
index 7419b5fab13..9ce9a48db44 100644
--- a/include/linux/mtd/onenand.h
+++ b/include/linux/mtd/onenand.h
@@ -35,6 +35,8 @@ typedef enum {
 	FL_SYNCING,
 	FL_UNLOCKING,
 	FL_LOCKING,
+	FL_RESETING,
+	FL_OTPING,
 	FL_PM_SUSPENDED,
 } onenand_state_t;
 
@@ -75,7 +77,7 @@ struct onenand_bufferram {
  * @param chip_lock	[INTERN] spinlock used to protect access to this structure and the chip
  * @param wq		[INTERN] wait queue to sleep on if a OneNAND operation is in progress
  * @param state		[INTERN] the current state of the OneNAND device
- * @param autooob	[REPLACEABLE] the default (auto)placement scheme
+ * @param ecclayout	[REPLACEABLE] the default ecc placement scheme
  * @param bbm		[REPLACEABLE] pointer to Bad Block Management
  * @param priv		[OPTIONAL] pointer to private chip date
  */
@@ -111,9 +113,9 @@ struct onenand_chip {
 	onenand_state_t		state;
 	unsigned char		*page_buf;
 
-	struct nand_oobinfo	*autooob;
+	struct nand_ecclayout	*ecclayout;
 
-	void 			*bbm;
+	void			*bbm;
 
 	void			*priv;
 };
@@ -130,6 +132,9 @@ struct onenand_chip {
 #define ONENAND_SET_SYS_CFG1(v, this)					\
 	(this->write_word(v, this->base + ONENAND_REG_SYS_CFG1))
 
+/* Check byte access in OneNAND */
+#define ONENAND_CHECK_BYTE_ACCESS(addr)		(addr & 0x1)
+
 /*
  * Options bits
  */
diff --git a/include/linux/mtd/onenand_regs.h b/include/linux/mtd/onenand_regs.h
index d7832ef8ed6..4a72818d254 100644
--- a/include/linux/mtd/onenand_regs.h
+++ b/include/linux/mtd/onenand_regs.h
@@ -112,6 +112,7 @@
 #define ONENAND_CMD_LOCK_TIGHT		(0x2C)
 #define ONENAND_CMD_ERASE		(0x94)
 #define ONENAND_CMD_RESET		(0xF0)
+#define ONENAND_CMD_OTP_ACCESS		(0x65)
 #define ONENAND_CMD_READID		(0x90)
 
 /* NOTE: Those are not *REAL* commands */
@@ -152,6 +153,8 @@
 #define ONENAND_CTRL_ERASE		(1 << 11)
 #define ONENAND_CTRL_ERROR		(1 << 10)
 #define ONENAND_CTRL_RSTB		(1 << 7)
+#define ONENAND_CTRL_OTP_L		(1 << 6)
+#define ONENAND_CTRL_OTP_BL		(1 << 5)
 
 /*
  * Interrupt Status Register F241h (R)
@@ -177,4 +180,9 @@
 #define ONENAND_ECC_2BIT		(1 << 1)
 #define ONENAND_ECC_2BIT_ALL		(0xAAAA)
 
+/*
+ * One-Time Programmable (OTP)
+ */
+#define ONENAND_OTP_LOCK_OFFSET		(14)
+
 #endif	/* __ONENAND_REG_H */
diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h
index b03f512d51b..da6b3d6f12a 100644
--- a/include/linux/mtd/partitions.h
+++ b/include/linux/mtd/partitions.h
@@ -41,7 +41,7 @@ struct mtd_partition {
 	u_int32_t size;			/* partition size */
 	u_int32_t offset;		/* offset within the master MTD space */
 	u_int32_t mask_flags;		/* master MTD flags to mask out for this partition */
-	struct nand_oobinfo *oobsel;	/* out of band layout for this partition (NAND only)*/
+	struct nand_ecclayout *ecclayout;	/* out of band layout for this partition (NAND only)*/
 	struct mtd_info **mtdp;		/* pointer to store the MTD object */
 };
 
diff --git a/include/linux/mtd/physmap.h b/include/linux/mtd/physmap.h
index c7b8bcdef01..86831e3594f 100644
--- a/include/linux/mtd/physmap.h
+++ b/include/linux/mtd/physmap.h
@@ -15,33 +15,26 @@
  */
 
 #ifndef __LINUX_MTD_PHYSMAP__
-
-#include <linux/config.h>
-
-#if defined(CONFIG_MTD_PHYSMAP)
+#define __LINUX_MTD_PHYSMAP__
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
 
-/*
- * The map_info for physmap.  Board can override size, buswidth, phys,
- * (*set_vpp)(), etc in their initial setup routine.
- */
-extern struct map_info physmap_map;
+struct physmap_flash_data {
+	unsigned int		width;
+	void			(*set_vpp)(struct map_info *, int);
+	unsigned int		nr_parts;
+	struct mtd_partition	*parts;
+};
 
 /*
  * Board needs to specify the exact mapping during their setup time.
  */
-static inline void physmap_configure(unsigned long addr, unsigned long size, int bankwidth, void (*set_vpp)(struct map_info *, int) )
-{
-	physmap_map.phys = addr;
-	physmap_map.size = size;
-	physmap_map.bankwidth = bankwidth;
-	physmap_map.set_vpp = set_vpp;
-}
+void physmap_configure(unsigned long addr, unsigned long size,
+		int bankwidth, void (*set_vpp)(struct map_info *, int) );
 
-#if defined(CONFIG_MTD_PARTITIONS)
+#ifdef CONFIG_MTD_PARTITIONS
 
 /*
  * Machines that wish to do flash partition may want to call this function in
@@ -55,7 +48,5 @@ static inline void physmap_configure(unsigned long addr, unsigned long size, int
 void physmap_set_partitions(struct mtd_partition *parts, int num_parts);
 
 #endif /* defined(CONFIG_MTD_PARTITIONS) */
-#endif /* defined(CONFIG_MTD) */
 
 #endif /* __LINUX_MTD_PHYSMAP__ */
-