Merge tag 'usb-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB 3.5-rc1 changes from Greg Kroah-Hartman:
 "Here is the big USB 3.5-rc1 pull request for the 3.5-rc1 merge window.

  It's touches a lot of different parts of the kernel, all USB drivers,
  due to some API cleanups (getting rid of the ancient err() macro) and
  some changes that are needed for USB 3.0 power management updates.

  There are also lots of new drivers, pimarily gadget, but others as
  well.  We deleted a staging driver, which was nice, and finally
  dropped the obsolete usbfs code, which will make Al happy to never
  have to touch that again.

  There were some build errors in the tree that linux-next found a few
  days ago, but those were fixed by the most recent changes (all were
  due to us not building with CONFIG_PM disabled.)

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'usb-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (477 commits)
  xhci: Fix DIV_ROUND_UP compile error.
  xhci: Fix compile with CONFIG_USB_SUSPEND=n
  USB: Fix core compile with CONFIG_USB_SUSPEND=n
  brcm80211: Fix compile error for .disable_hub_initiated_lpm.
  Revert "USB: EHCI: work around bug in the Philips ISP1562 controller"
  MAINTAINERS: Add myself as maintainer to the USB PHY Layer
  USB: EHCI: fix command register configuration lost problem
  USB: Remove races in devio.c
  USB: ehci-platform: remove update_device
  USB: Disable hub-initiated LPM for comms devices.
  xhci: Add Intel U1/U2 timeout policy.
  xhci: Add infrastructure for host-specific LPM policies.
  USB: Add macros for interrupt endpoint types.
  xhci: Reserve one command for USB3 LPM disable.
  xhci: Some Evaluate Context commands must succeed.
  USB: Disable USB 3.0 LPM in critical sections.
  USB: Add support to enable/disable USB3 link states.
  USB: Allow drivers to disable hub-initiated LPM.
  USB: Calculate USB 3.0 exit latencies for LPM.
  USB: Refactor code to set LPM support flag.
  ...

Conflicts:
	arch/arm/mach-exynos/mach-nuri.c
	arch/arm/mach-exynos/mach-universal_c210.c
	drivers/net/wireless/ath/ath6kl/usb.c

15 files changed, 347 insertions, 361 deletions

diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
index 5af9a075498..98bb2901d7b 100644
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -139,6 +139,7 @@ struct bcma_device {
 	u8 core_unit;
 
 	u32 addr;
+	u32 addr1;
 	u32 wrap;
 
 	void __iomem *io_addr;
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index fffdf00f87b..15be561e739 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -6,7 +6,7 @@
  *
  * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
- * Copyright 2004 Freescale Semiconductor, Inc
+ * Copyright 2004,2012 Freescale Semiconductor, Inc
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -17,6 +17,12 @@
 #ifndef _FSL_DEVICE_H_
 #define _FSL_DEVICE_H_
 
+#define FSL_UTMI_PHY_DLY	10	/*As per P1010RM, delay for UTMI
+				PHY CLK to become stable - 10ms*/
+#define FSL_USB_VER_OLD		0
+#define FSL_USB_VER_1_6		1
+#define FSL_USB_VER_2_2		2
+
 #include <linux/types.h>
 
 /*
@@ -63,6 +69,7 @@ struct platform_device;
 
 struct fsl_usb2_platform_data {
 	/* board specific information */
+	int				controller_ver;
 	enum fsl_usb2_operating_modes	operating_mode;
 	enum fsl_usb2_phy_modes		phy_mode;
 	unsigned int			port_enables;
diff --git a/include/linux/platform_data/ehci-sh.h b/include/linux/platform_data/ehci-sh.h
new file mode 100644
index 00000000000..5c15a738e11
--- /dev/null
+++ b/include/linux/platform_data/ehci-sh.h
@@ -0,0 +1,28 @@
+/*
+ * EHCI SuperH driver platform data
+ *
+ * Copyright (C) 2012  Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ * Copyright (C) 2012  Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef __USB_EHCI_SH_H
+#define __USB_EHCI_SH_H
+
+struct ehci_sh_platdata {
+	void (*phy_init)(void); /* Phy init function */
+};
+
+#endif /* __USB_EHCI_SH_H */
diff --git a/include/linux/platform_data/s3c-hsotg.h b/include/linux/platform_data/s3c-hsotg.h
new file mode 100644
index 00000000000..97ec12c2ded
--- /dev/null
+++ b/include/linux/platform_data/s3c-hsotg.h
@@ -0,0 +1,35 @@
+/* include/linux/platform_data/s3c-hsotg.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C USB2.0 High-speed / OtG platform information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+enum s3c_hsotg_dmamode {
+	S3C_HSOTG_DMA_NONE,	/* do not use DMA at-all */
+	S3C_HSOTG_DMA_ONLY,	/* always use DMA */
+	S3C_HSOTG_DMA_DRV,	/* DMA is chosen by driver */
+};
+
+/**
+ * struct s3c_hsotg_plat - platform data for high-speed otg/udc
+ * @dma: Whether to use DMA or not.
+ * @is_osc: The clock source is an oscillator, not a crystal
+ */
+struct s3c_hsotg_plat {
+	enum s3c_hsotg_dmamode	dma;
+	unsigned int		is_osc:1;
+	int                     phy_type;
+
+	int (*phy_init)(struct platform_device *pdev, int type);
+	int (*phy_exit)(struct platform_device *pdev, int type);
+};
+
+extern void s3c_hsotg_set_platdata(struct s3c_hsotg_plat *pd);
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 73b68d1f2cb..dea39dc551d 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -351,10 +351,6 @@ struct usb_bus {
 	int bandwidth_int_reqs;		/* number of Interrupt requests */
 	int bandwidth_isoc_reqs;	/* number of Isoc. requests */
 
-#ifdef CONFIG_USB_DEVICEFS
-	struct dentry *usbfs_dentry;	/* usbfs dentry entry for the bus */
-#endif
-
 #if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
 	struct mon_bus *mon_bus;	/* non-null when associated */
 	int monitored;			/* non-zero when monitored */
@@ -382,6 +378,45 @@ enum usb_device_removable {
 	USB_DEVICE_FIXED,
 };
 
+/*
+ * USB 3.0 Link Power Management (LPM) parameters.
+ *
+ * PEL and SEL are USB 3.0 Link PM latencies for device-initiated LPM exit.
+ * MEL is the USB 3.0 Link PM latency for host-initiated LPM exit.
+ * All three are stored in nanoseconds.
+ */
+struct usb3_lpm_parameters {
+	/*
+	 * Maximum exit latency (MEL) for the host to send a packet to the
+	 * device (either a Ping for isoc endpoints, or a data packet for
+	 * interrupt endpoints), the hubs to decode the packet, and for all hubs
+	 * in the path to transition the links to U0.
+	 */
+	unsigned int mel;
+	/*
+	 * Maximum exit latency for a device-initiated LPM transition to bring
+	 * all links into U0.  Abbreviated as "PEL" in section 9.4.12 of the USB
+	 * 3.0 spec, with no explanation of what "P" stands for.  "Path"?
+	 */
+	unsigned int pel;
+
+	/*
+	 * The System Exit Latency (SEL) includes PEL, and three other
+	 * latencies.  After a device initiates a U0 transition, it will take
+	 * some time from when the device sends the ERDY to when it will finally
+	 * receive the data packet.  Basically, SEL should be the worse-case
+	 * latency from when a device starts initiating a U0 transition to when
+	 * it will get data.
+	 */
+	unsigned int sel;
+	/*
+	 * The idle timeout value that is currently programmed into the parent
+	 * hub for this device.  When the timer counts to zero, the parent hub
+	 * will initiate an LPM transition to either U1 or U2.
+	 */
+	int timeout;
+};
+
 /**
  * struct usb_device - kernel's representation of a USB device
  * @devnum: device number; address on a USB bus
@@ -439,6 +474,12 @@ enum usb_device_removable {
  *	specific data for the device.
  * @slot_id: Slot ID assigned by xHCI
  * @removable: Device can be physically removed from this port
+ * @u1_params: exit latencies for USB3 U1 LPM state, and hub-initiated timeout.
+ * @u2_params: exit latencies for USB3 U2 LPM state, and hub-initiated timeout.
+ * @lpm_disable_count: Ref count used by usb_disable_lpm() and usb_enable_lpm()
+ *	to keep track of the number of functions that require USB 3.0 Link Power
+ *	Management to be disabled for this usb_device.  This count should only
+ *	be manipulated by those functions, with the bandwidth_mutex is held.
  *
  * Notes:
  * Usbcore drivers should not set usbdev->state directly.  Instead use
@@ -485,6 +526,7 @@ struct usb_device {
 	unsigned lpm_capable:1;
 	unsigned usb2_hw_lpm_capable:1;
 	unsigned usb2_hw_lpm_enabled:1;
+	unsigned usb3_lpm_enabled:1;
 	int string_langid;
 
 	/* static strings from the device */
@@ -493,12 +535,6 @@ struct usb_device {
 	char *serial;
 
 	struct list_head filelist;
-#ifdef CONFIG_USB_DEVICE_CLASS
-	struct device *usb_classdev;
-#endif
-#ifdef CONFIG_USB_DEVICEFS
-	struct dentry *usbfs_dentry;
-#endif
 
 	int maxchild;
 	struct usb_device **children;
@@ -517,6 +553,10 @@ struct usb_device {
 	struct wusb_dev *wusb_dev;
 	int slot_id;
 	enum usb_device_removable removable;
+	struct usb3_lpm_parameters u1_params;
+	struct usb3_lpm_parameters u2_params;
+	unsigned lpm_disable_count;
+	unsigned hub_initiated_lpm_disable_count;
 };
 #define	to_usb_device(d) container_of(d, struct usb_device, dev)
 
@@ -583,6 +623,12 @@ static inline void usb_mark_last_busy(struct usb_device *udev)
 { }
 #endif
 
+extern int usb_disable_lpm(struct usb_device *udev);
+extern void usb_enable_lpm(struct usb_device *udev);
+/* Same as above, but these functions lock/unlock the bandwidth_mutex. */
+extern int usb_unlocked_disable_lpm(struct usb_device *udev);
+extern void usb_unlocked_enable_lpm(struct usb_device *udev);
+
 /*-------------------------------------------------------------------------*/
 
 /* for drivers using iso endpoints */
@@ -800,6 +846,8 @@ extern ssize_t usb_store_new_id(struct usb_dynids *dynids,
 				struct device_driver *driver,
 				const char *buf, size_t count);
 
+extern ssize_t usb_show_dynids(struct usb_dynids *dynids, char *buf);
+
 /**
  * struct usbdrv_wrap - wrapper for driver-model structure
  * @driver: The driver-model core driver structure.
@@ -850,6 +898,9 @@ struct usbdrv_wrap {
  *	for interfaces bound to this driver.
  * @soft_unbind: if set to 1, the USB core will not kill URBs and disable
  *	endpoints before calling the driver's disconnect method.
+ * @disable_hub_initiated_lpm: if set to 0, the USB core will not allow hubs
+ *	to initiate lower power link state transitions when an idle timeout
+ *	occurs.  Device-initiated USB 3.0 link PM will still be allowed.
  *
  * USB interface drivers must provide a name, probe() and disconnect()
  * methods, and an id_table.  Other driver fields are optional.
@@ -890,6 +941,7 @@ struct usb_driver {
 	struct usbdrv_wrap drvwrap;
 	unsigned int no_dynamic_id:1;
 	unsigned int supports_autosuspend:1;
+	unsigned int disable_hub_initiated_lpm:1;
 	unsigned int soft_unbind:1;
 };
 #define	to_usb_driver(d) container_of(d, struct usb_driver, drvwrap.driver)
@@ -1379,6 +1431,7 @@ extern int usb_unlink_urb(struct urb *urb);
 extern void usb_kill_urb(struct urb *urb);
 extern void usb_poison_urb(struct urb *urb);
 extern void usb_unpoison_urb(struct urb *urb);
+extern void usb_block_urb(struct urb *urb);
 extern void usb_kill_anchored_urbs(struct usb_anchor *anchor);
 extern void usb_poison_anchored_urbs(struct usb_anchor *anchor);
 extern void usb_unpoison_anchored_urbs(struct usb_anchor *anchor);
@@ -1391,6 +1444,8 @@ extern struct urb *usb_get_from_anchor(struct usb_anchor *anchor);
 extern void usb_scuttle_anchored_urbs(struct usb_anchor *anchor);
 extern int usb_anchor_empty(struct usb_anchor *anchor);
 
+#define usb_unblock_urb	usb_unpoison_urb
+
 /**
  * usb_urb_dir_in - check if an URB describes an IN transfer
  * @urb: URB to be checked
@@ -1627,6 +1682,7 @@ static inline int usb_translate_errors(int error_code)
 	case 0:
 	case -ENOMEM:
 	case -ENODEV:
+	case -EOPNOTSUPP:
 		return error_code;
 	default:
 		return -EIO;
@@ -1652,9 +1708,6 @@ do {									\
 } while (0)
 #endif
 
-#define err(format, arg...)					\
-	printk(KERN_ERR KBUILD_MODNAME ": " format "\n", ##arg)
-
 /* debugfs stuff */
 extern struct dentry *usb_debug_root;
 
diff --git a/include/linux/usb/ch11.h b/include/linux/usb/ch11.h
index f1d26b6067f..b6c2863b2c9 100644
--- a/include/linux/usb/ch11.h
+++ b/include/linux/usb/ch11.h
@@ -76,6 +76,8 @@
 #define USB_PORT_FEAT_C_BH_PORT_RESET		29
 #define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT	30
 
+#define USB_PORT_LPM_TIMEOUT(p)			(((p) & 0xff) << 8)
+
 /* USB 3.0 hub remote wake mask bits, see table 10-14 */
 #define USB_PORT_FEAT_REMOTE_WAKE_CONNECT	(1 << 8)
 #define USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT	(1 << 9)
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index af21f311591..d1d732c2838 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -88,6 +88,8 @@
 #define USB_REQ_GET_INTERFACE		0x0A
 #define USB_REQ_SET_INTERFACE		0x0B
 #define USB_REQ_SYNCH_FRAME		0x0C
+#define USB_REQ_SET_SEL			0x30
+#define USB_REQ_SET_ISOCH_DELAY		0x31
 
 #define USB_REQ_SET_ENCRYPTION		0x0D	/* Wireless USB */
 #define USB_REQ_GET_ENCRYPTION		0x0E
@@ -390,6 +392,11 @@ struct usb_endpoint_descriptor {
 #define USB_ENDPOINT_XFER_INT		3
 #define USB_ENDPOINT_MAX_ADJUSTABLE	0x80
 
+/* The USB 3.0 spec redefines bits 5:4 of bmAttributes as interrupt ep type. */
+#define USB_ENDPOINT_INTRTYPE		0x30
+#define USB_ENDPOINT_INTR_PERIODIC	(0 << 4)
+#define USB_ENDPOINT_INTR_NOTIFICATION	(1 << 4)
+
 #define USB_ENDPOINT_SYNCTYPE		0x0c
 #define USB_ENDPOINT_SYNC_NONE		(0 << 2)
 #define USB_ENDPOINT_SYNC_ASYNC		(1 << 2)
@@ -592,6 +599,12 @@ static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd)
 	return __le16_to_cpu(epd->wMaxPacketSize);
 }
 
+static inline int usb_endpoint_interrupt_type(
+		const struct usb_endpoint_descriptor *epd)
+{
+	return epd->bmAttributes & USB_ENDPOINT_INTRTYPE;
+}
+
 /*-------------------------------------------------------------------------*/
 
 /* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */
@@ -933,6 +946,51 @@ enum usb_device_state {
 	 */
 };
 
+enum usb3_link_state {
+	USB3_LPM_U0 = 0,
+	USB3_LPM_U1,
+	USB3_LPM_U2,
+	USB3_LPM_U3
+};
+
+/*
+ * A U1 timeout of 0x0 means the parent hub will reject any transitions to U1.
+ * 0xff means the parent hub will accept transitions to U1, but will not
+ * initiate a transition.
+ *
+ * A U1 timeout of 0x1 to 0x7F also causes the hub to initiate a transition to
+ * U1 after that many microseconds.  Timeouts of 0x80 to 0xFE are reserved
+ * values.
+ *
+ * A U2 timeout of 0x0 means the parent hub will reject any transitions to U2.
+ * 0xff means the parent hub will accept transitions to U2, but will not
+ * initiate a transition.
+ *
+ * A U2 timeout of 0x1 to 0xFE also causes the hub to initiate a transition to
+ * U2 after N*256 microseconds.  Therefore a U2 timeout value of 0x1 means a U2
+ * idle timer of 256 microseconds, 0x2 means 512 microseconds, 0xFE means
+ * 65.024ms.
+ */
+#define USB3_LPM_DISABLED		0x0
+#define USB3_LPM_U1_MAX_TIMEOUT		0x7F
+#define USB3_LPM_U2_MAX_TIMEOUT		0xFE
+#define USB3_LPM_DEVICE_INITIATED	0xFF
+
+struct usb_set_sel_req {
+	__u8	u1_sel;
+	__u8	u1_pel;
+	__le16	u2_sel;
+	__le16	u2_pel;
+} __attribute__ ((packed));
+
+/*
+ * The Set System Exit Latency control transfer provides one byte each for
+ * U1 SEL and U1 PEL, so the max exit latency is 0xFF.  U2 SEL and U2 PEL each
+ * are two bytes long.
+ */
+#define USB3_LPM_MAX_U1_SEL_PEL		0xFF
+#define USB3_LPM_MAX_U2_SEL_PEL		0xFFFF
+
 /*-------------------------------------------------------------------------*/
 
 /*
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
new file mode 100644
index 00000000000..edb90d6cfd1
--- /dev/null
+++ b/include/linux/usb/chipidea.h
@@ -0,0 +1,28 @@
+/*
+ * Platform data for the chipidea USB dual role controller
+ */
+
+#ifndef __LINUX_USB_CHIPIDEA_H
+#define __LINUX_USB_CHIPIDEA_H
+
+struct ci13xxx;
+struct ci13xxx_udc_driver {
+	const char	*name;
+	/* offset of the capability registers */
+	uintptr_t	 capoffset;
+	unsigned	 power_budget;
+	unsigned long	 flags;
+#define CI13XXX_REGS_SHARED		BIT(0)
+#define CI13XXX_REQUIRE_TRANSCEIVER	BIT(1)
+#define CI13XXX_PULLUP_ON_VBUS		BIT(2)
+#define CI13XXX_DISABLE_STREAMING	BIT(3)
+
+#define CI13XXX_CONTROLLER_RESET_EVENT		0
+#define CI13XXX_CONTROLLER_STOPPED_EVENT	1
+	void	(*notify_event) (struct ci13xxx *udc, unsigned event);
+};
+
+/* Default offset of capability registers */
+#define DEF_CAPOFFSET		0x100
+
+#endif
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index a316fba7351..9d8c3b63449 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -242,6 +242,9 @@ int usb_add_config(struct usb_composite_dev *,
 		struct usb_configuration *,
 		int (*)(struct usb_configuration *));
 
+void usb_remove_config(struct usb_composite_dev *,
+		struct usb_configuration *);
+
 /**
  * struct usb_composite_driver - groups configurations into a gadget
  * @name: For diagnostics, identifies the driver.
@@ -250,6 +253,8 @@ int usb_add_config(struct usb_composite_dev *,
  * @iManufacturer: Used as iManufacturer override if @dev->iManufacturer is
  *	not set. If NULL a default "<system> <release> with <udc>" value
  *	will be used.
+ * @iSerialNumber: Used as iSerialNumber override if @dev->iSerialNumber is
+ *	not set.
  * @dev: Template descriptor for the device, including default device
  *	identifiers.
  * @strings: tables of strings, keyed by identifiers assigned during bind()
@@ -280,6 +285,7 @@ struct usb_composite_driver {
 	const char				*name;
 	const char				*iProduct;
 	const char				*iManufacturer;
+	const char				*iSerialNumber;
 	const struct usb_device_descriptor	*dev;
 	struct usb_gadget_strings		**strings;
 	enum usb_device_speed			max_speed;
diff --git a/include/linux/usb/functionfs.h b/include/linux/usb/functionfs.h
index 7587ef934ba..a843d085136 100644
--- a/include/linux/usb/functionfs.h
+++ b/include/linux/usb/functionfs.h
@@ -190,8 +190,10 @@ static int functionfs_ready_callback(struct ffs_data *ffs)
 	__attribute__((warn_unused_result, nonnull));
 static void functionfs_closed_callback(struct ffs_data *ffs)
 	__attribute__((nonnull));
-static int functionfs_check_dev_callback(const char *dev_name)
+static void *functionfs_acquire_dev_callback(const char *dev_name)
 	__attribute__((warn_unused_result, nonnull));
+static void functionfs_release_dev_callback(struct ffs_data *ffs_data)
+	__attribute__((nonnull));
 
 
 #endif
diff --git a/include/linux/usb/gpio_vbus.h b/include/linux/usb/gpio_vbus.h
index d9f03ccc2d6..837bba604a0 100644
--- a/include/linux/usb/gpio_vbus.h
+++ b/include/linux/usb/gpio_vbus.h
@@ -17,6 +17,7 @@
  * @gpio_pullup: optional D+ or D- pullup GPIO (else negative/invalid)
  * @gpio_vbus_inverted: true if gpio_vbus is active low
  * @gpio_pullup_inverted: true if gpio_pullup is active low
+ * @wakeup: configure gpio_vbus as a wake-up source
  *
  * The VBUS sensing GPIO should have a pulldown, which will normally be
  * part of a resistor ladder turning a 4.0V-5.25V level on VBUS into a
@@ -27,4 +28,5 @@ struct gpio_vbus_mach_info {
 	int gpio_pullup;
 	bool gpio_vbus_inverted;
 	bool gpio_pullup_inverted;
+	bool wakeup;
 };
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index d28cc78a38e..7f855d50cdf 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -344,6 +344,15 @@ struct hc_driver {
 		 */
 	int	(*update_device)(struct usb_hcd *, struct usb_device *);
 	int	(*set_usb2_hw_lpm)(struct usb_hcd *, struct usb_device *, int);
+	/* USB 3.0 Link Power Management */
+		/* Returns the USB3 hub-encoded value for the U1/U2 timeout. */
+	int	(*enable_usb3_lpm_timeout)(struct usb_hcd *,
+			struct usb_device *, enum usb3_link_state state);
+		/* The xHCI host controller can still fail the command to
+		 * disable the LPM timeouts, so this can return an error code.
+		 */
+	int	(*disable_usb3_lpm_timeout)(struct usb_hcd *,
+			struct usb_device *, enum usb3_link_state state);
 };
 
 extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
@@ -584,29 +593,6 @@ static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd)
 }
 #endif /* CONFIG_USB_SUSPEND */
 
-
-/*
- * USB device fs stuff
- */
-
-#ifdef CONFIG_USB_DEVICEFS
-
-/*
- * these are expected to be called from the USB core/hub thread
- * with the kernel lock held
- */
-extern void usbfs_update_special(void);
-extern int usbfs_init(void);
-extern void usbfs_cleanup(void);
-
-#else /* CONFIG_USB_DEVICEFS */
-
-static inline void usbfs_update_special(void) {}
-static inline int usbfs_init(void) { return 0; }
-static inline void usbfs_cleanup(void) { }
-
-#endif /* CONFIG_USB_DEVICEFS */
-
 /*-------------------------------------------------------------------------*/
 
 #if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
diff --git a/include/linux/usb/isp1301.h b/include/linux/usb/isp1301.h
new file mode 100644
index 00000000000..d3a851c28b6
--- /dev/null
+++ b/include/linux/usb/isp1301.h
@@ -0,0 +1,80 @@
+/*
+ * NXP ISP1301 USB transceiver driver
+ *
+ * Copyright (C) 2012 Roland Stigge <stigge@antcom.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __LINUX_USB_ISP1301_H
+#define __LINUX_USB_ISP1301_H
+
+#include <linux/of.h>
+
+/* I2C Register definitions: */
+
+#define ISP1301_I2C_MODE_CONTROL_1	0x04	/* u8 read, set, +1 clear */
+
+#define MC1_SPEED_REG			(1 << 0)
+#define MC1_SUSPEND_REG			(1 << 1)
+#define MC1_DAT_SE0			(1 << 2)
+#define MC1_TRANSPARENT			(1 << 3)
+#define MC1_BDIS_ACON_EN		(1 << 4)
+#define MC1_OE_INT_EN			(1 << 5)
+#define MC1_UART_EN			(1 << 6)
+#define MC1_MASK			0x7f
+
+#define ISP1301_I2C_MODE_CONTROL_2	0x12	/* u8 read, set, +1 clear */
+
+#define MC2_GLOBAL_PWR_DN		(1 << 0)
+#define MC2_SPD_SUSP_CTRL		(1 << 1)
+#define MC2_BI_DI			(1 << 2)
+#define MC2_TRANSP_BDIR0		(1 << 3)
+#define MC2_TRANSP_BDIR1		(1 << 4)
+#define MC2_AUDIO_EN			(1 << 5)
+#define MC2_PSW_EN			(1 << 6)
+#define MC2_EN2V7			(1 << 7)
+
+#define ISP1301_I2C_OTG_CONTROL_1	0x06	/* u8 read, set, +1 clear */
+
+#define OTG1_DP_PULLUP			(1 << 0)
+#define OTG1_DM_PULLUP			(1 << 1)
+#define OTG1_DP_PULLDOWN		(1 << 2)
+#define OTG1_DM_PULLDOWN		(1 << 3)
+#define OTG1_ID_PULLDOWN		(1 << 4)
+#define OTG1_VBUS_DRV			(1 << 5)
+#define OTG1_VBUS_DISCHRG		(1 << 6)
+#define OTG1_VBUS_CHRG			(1 << 7)
+
+#define ISP1301_I2C_OTG_CONTROL_2	0x10	/* u8 readonly */
+
+#define OTG_B_SESS_END			(1 << 6)
+#define OTG_B_SESS_VLD			(1 << 7)
+
+#define ISP1301_I2C_INTERRUPT_SOURCE	0x8
+#define ISP1301_I2C_INTERRUPT_LATCH	0xA
+#define ISP1301_I2C_INTERRUPT_FALLING	0xC
+#define ISP1301_I2C_INTERRUPT_RISING	0xE
+
+#define INT_VBUS_VLD			(1 << 0)
+#define INT_SESS_VLD			(1 << 1)
+#define INT_DP_HI			(1 << 2)
+#define INT_ID_GND			(1 << 3)
+#define INT_DM_HI			(1 << 4)
+#define INT_ID_FLOAT			(1 << 5)
+#define INT_BDIS_ACON			(1 << 6)
+#define INT_CR_INT			(1 << 7)
+
+#define ISP1301_I2C_REG_CLEAR_ADDR	1	/* Register Address Modifier */
+
+struct i2c_client *isp1301_get_client(struct device_node *node);
+
+#endif /* __LINUX_USB_ISP1301_H */
diff --git a/include/linux/usb/langwell_udc.h b/include/linux/usb/langwell_udc.h
deleted file mode 100644
index 2d2d1bbad9d..00000000000
--- a/include/linux/usb/langwell_udc.h
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- * Intel Langwell USB Device Controller driver
- * Copyright (C) 2008-2009, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-
-#ifndef __LANGWELL_UDC_H
-#define __LANGWELL_UDC_H
-
-
-/* MACRO defines */
-#define	CAP_REG_OFFSET		0x0
-#define	OP_REG_OFFSET		0x28
-
-#define	DMA_ADDR_INVALID	(~(dma_addr_t)0)
-
-#define	DQH_ALIGNMENT		2048
-#define	DTD_ALIGNMENT		64
-#define	DMA_BOUNDARY		4096
-
-#define	EP0_MAX_PKT_SIZE	64
-#define EP_DIR_IN		1
-#define EP_DIR_OUT		0
-
-#define FLUSH_TIMEOUT		1000
-#define RESET_TIMEOUT		1000
-#define SETUPSTAT_TIMEOUT	100
-#define PRIME_TIMEOUT		100
-
-
-/* device memory space registers */
-
-/* Capability Registers, BAR0 + CAP_REG_OFFSET */
-struct langwell_cap_regs {
-	/* offset: 0x0 */
-	u8	caplength;	/* offset of Operational Register */
-	u8	_reserved3;
-	u16	hciversion;	/* H: BCD encoding of host version */
-	u32	hcsparams;	/* H: host port steering logic capability */
-	u32	hccparams;	/* H: host multiple mode control capability */
-#define	HCC_LEN	BIT(17)		/* Link power management (LPM) capability */
-	u8	_reserved4[0x20-0xc];
-	/* offset: 0x20 */
-	u16	dciversion;	/* BCD encoding of device version */
-	u8	_reserved5[0x24-0x22];
-	u32	dccparams;	/* overall device controller capability */
-#define	HOSTCAP	BIT(8)		/* host capable */
-#define	DEVCAP	BIT(7)		/* device capable */
-#define DEN(d)	\
-	(((d)>>0)&0x1f)		/* bits 4:0, device endpoint number */
-} __attribute__ ((packed));
-
-
-/* Operational Registers, BAR0 + OP_REG_OFFSET */
-struct langwell_op_regs {
-	/* offset: 0x28 */
-	u32	extsts;
-#define	EXTS_TI1	BIT(4)	/* general purpose timer interrupt 1 */
-#define	EXTS_TI1TI0	BIT(3)	/* general purpose timer interrupt 0 */
-#define	EXTS_TI1UPI	BIT(2)	/* USB host periodic interrupt */
-#define	EXTS_TI1UAI	BIT(1)	/* USB host asynchronous interrupt */
-#define	EXTS_TI1NAKI	BIT(0)	/* NAK interrupt */
-	u32	extintr;
-#define	EXTI_TIE1	BIT(4)	/* general purpose timer interrupt enable 1 */
-#define	EXTI_TIE0	BIT(3)	/* general purpose timer interrupt enable 0 */
-#define	EXTI_UPIE	BIT(2)	/* USB host periodic interrupt enable */
-#define	EXTI_UAIE	BIT(1)	/* USB host asynchronous interrupt enable */
-#define	EXTI_NAKE	BIT(0)	/* NAK interrupt enable */
-	/* offset: 0x30 */
-	u32	usbcmd;
-#define	CMD_HIRD(u)	\
-	(((u)>>24)&0xf)		/* bits 27:24, host init resume duration */
-#define	CMD_ITC(u)	\
-	(((u)>>16)&0xff)	/* bits 23:16, interrupt threshold control */
-#define	CMD_PPE		BIT(15)	/* per-port change events enable */
-#define	CMD_ATDTW	BIT(14)	/* add dTD tripwire */
-#define	CMD_SUTW	BIT(13)	/* setup tripwire */
-#define	CMD_ASPE	BIT(11) /* asynchronous schedule park mode enable */
-#define	CMD_FS2		BIT(10)	/* frame list size */
-#define	CMD_ASP1	BIT(9)	/* asynchronous schedule park mode count */
-#define	CMD_ASP0	BIT(8)
-#define	CMD_LR		BIT(7)	/* light host/device controller reset */
-#define	CMD_IAA		BIT(6)	/* interrupt on async advance doorbell */
-#define	CMD_ASE		BIT(5)	/* asynchronous schedule enable */
-#define	CMD_PSE		BIT(4)	/* periodic schedule enable */
-#define	CMD_FS1		BIT(3)
-#define	CMD_FS0		BIT(2)
-#define	CMD_RST		BIT(1)	/* controller reset */
-#define	CMD_RUNSTOP	BIT(0)	/* run/stop */
-	u32	usbsts;
-#define	STS_PPCI(u)	\
-	(((u)>>16)&0xffff)	/* bits 31:16, port-n change detect */
-#define	STS_AS		BIT(15)	/* asynchronous schedule status */
-#define	STS_PS		BIT(14)	/* periodic schedule status */
-#define	STS_RCL		BIT(13)	/* reclamation */
-#define	STS_HCH		BIT(12)	/* HC halted */
-#define	STS_ULPII	BIT(10)	/* ULPI interrupt */
-#define	STS_SLI		BIT(8)	/* DC suspend */
-#define	STS_SRI		BIT(7)	/* SOF received */
-#define	STS_URI		BIT(6)	/* USB reset received */
-#define	STS_AAI		BIT(5)	/* interrupt on async advance */
-#define	STS_SEI		BIT(4)	/* system error */
-#define	STS_FRI		BIT(3)	/* frame list rollover */
-#define	STS_PCI		BIT(2)	/* port change detect */
-#define	STS_UEI		BIT(1)	/* USB error interrupt */
-#define	STS_UI		BIT(0)	/* USB interrupt */
-	u32	usbintr;
-/* bits 31:16, per-port interrupt enable */
-#define	INTR_PPCE(u)	(((u)>>16)&0xffff)
-#define	INTR_ULPIE	BIT(10)	/* ULPI enable */
-#define	INTR_SLE	BIT(8)	/* DC sleep/suspend enable */
-#define	INTR_SRE	BIT(7)	/* SOF received enable */
-#define	INTR_URE	BIT(6)	/* USB reset enable */
-#define	INTR_AAE	BIT(5)	/* interrupt on async advance enable */
-#define	INTR_SEE	BIT(4)	/* system error enable */
-#define	INTR_FRE	BIT(3)	/* frame list rollover enable */
-#define	INTR_PCE	BIT(2)	/* port change detect enable */
-#define	INTR_UEE	BIT(1)	/* USB error interrupt enable */
-#define	INTR_UE		BIT(0)	/* USB interrupt enable */
-	u32	frindex;	/* frame index */
-#define	FRINDEX_MASK	(0x3fff << 0)
-	u32	ctrldssegment;	/* not used */
-	u32	deviceaddr;
-#define USBADR_SHIFT	25
-#define	USBADR(d)	\
-	(((d)>>25)&0x7f)	/* bits 31:25, device address */
-#define USBADR_MASK	(0x7f << 25)
-#define	USBADRA		BIT(24)	/* device address advance */
-	u32	endpointlistaddr;/* endpoint list top memory address */
-/* bits 31:11, endpoint list pointer */
-#define	EPBASE(d)	(((d)>>11)&0x1fffff)
-#define	ENDPOINTLISTADDR_MASK	(0x1fffff << 11)
-	u32	ttctrl;		/* H: TT operatin, not used */
-	/* offset: 0x50 */
-	u32	burstsize;	/* burst size of data movement */
-#define	TXPBURST(b)	\
-	(((b)>>8)&0xff)		/* bits 15:8, TX burst length */
-#define	RXPBURST(b)	\
-	(((b)>>0)&0xff)		/* bits 7:0, RX burst length */
-	u32	txfilltuning;	/* TX tuning */
-	u32	txttfilltuning;	/* H: TX TT tuning */
-	u32	ic_usb;		/* control the IC_USB FS/LS transceiver */
-	/* offset: 0x60 */
-	u32	ulpi_viewport;	/* indirect access to ULPI PHY */
-#define	ULPIWU		BIT(31)	/* ULPI wakeup */
-#define	ULPIRUN		BIT(30)	/* ULPI read/write run */
-#define	ULPIRW		BIT(29)	/* ULPI read/write control */
-#define	ULPISS		BIT(27)	/* ULPI sync state */
-#define	ULPIPORT(u)	\
-	(((u)>>24)&7)		/* bits 26:24, ULPI port number */
-#define	ULPIADDR(u)	\
-	(((u)>>16)&0xff)	/* bits 23:16, ULPI data address */
-#define	ULPIDATRD(u)	\
-	(((u)>>8)&0xff)		/* bits 15:8, ULPI data read */
-#define	ULPIDATWR(u)	\
-	(((u)>>0)&0xff)		/* bits 7:0, ULPI date write */
-	u8	_reserved6[0x70-0x64];
-	/* offset: 0x70 */
-	u32	configflag;	/* H: not used */
-	u32	portsc1;	/* port status */
-#define	DA(p)	\
-	(((p)>>25)&0x7f)	/* bits 31:25, device address */
-#define	PORTS_SSTS	(BIT(24) | BIT(23))	/* suspend status */
-#define	PORTS_WKOC	BIT(22)	/* wake on over-current enable */
-#define	PORTS_WKDS	BIT(21)	/* wake on disconnect enable */
-#define	PORTS_WKCN	BIT(20)	/* wake on connect enable */
-#define	PORTS_PTC(p)	(((p)>>16)&0xf)	/* bits 19:16, port test control */
-#define	PORTS_PIC	(BIT(15) | BIT(14))	/* port indicator control */
-#define	PORTS_PO	BIT(13)	/* port owner */
-#define	PORTS_PP	BIT(12)	/* port power */
-#define	PORTS_LS	(BIT(11) | BIT(10))	/* line status */
-#define	PORTS_SLP	BIT(9)	/* suspend using L1 */
-#define	PORTS_PR	BIT(8)	/* port reset */
-#define	PORTS_SUSP	BIT(7)	/* suspend */
-#define	PORTS_FPR	BIT(6)	/* force port resume */
-#define	PORTS_OCC	BIT(5)	/* over-current change */
-#define	PORTS_OCA	BIT(4)	/* over-current active */
-#define	PORTS_PEC	BIT(3)	/* port enable/disable change */
-#define	PORTS_PE	BIT(2)	/* port enable/disable */
-#define	PORTS_CSC	BIT(1)	/* connect status change */
-#define	PORTS_CCS	BIT(0)	/* current connect status */
-	u8	_reserved7[0xb4-0x78];
-	/* offset: 0xb4 */
-	u32	devlc;		/* control LPM and each USB port behavior */
-/* bits 31:29, parallel transceiver select */
-#define	LPM_PTS(d)	(((d)>>29)&7)
-#define	LPM_STS		BIT(28)	/* serial transceiver select */
-#define	LPM_PTW		BIT(27)	/* parallel transceiver width */
-#define	LPM_PSPD(d)	(((d)>>25)&3)	/* bits 26:25, port speed */
-#define LPM_PSPD_MASK	(BIT(26) | BIT(25))
-#define LPM_SPEED_FULL	0
-#define LPM_SPEED_LOW	1
-#define LPM_SPEED_HIGH	2
-#define	LPM_SRT		BIT(24)	/* shorten reset time */
-#define	LPM_PFSC	BIT(23)	/* port force full speed connect */
-#define	LPM_PHCD	BIT(22) /* PHY low power suspend clock disable */
-#define	LPM_STL		BIT(16)	/* STALL reply to LPM token */
-#define	LPM_BA(d)	\
-	(((d)>>1)&0x7ff)	/* bits 11:1, BmAttributes */
-#define	LPM_NYT_ACK	BIT(0)	/* NYET/ACK reply to LPM token */
-	u8	_reserved8[0xf4-0xb8];
-	/* offset: 0xf4 */
-	u32	otgsc;		/* On-The-Go status and control */
-#define	OTGSC_DPIE	BIT(30)	/* data pulse interrupt enable */
-#define	OTGSC_MSE	BIT(29)	/* 1 ms timer interrupt enable */
-#define	OTGSC_BSEIE	BIT(28)	/* B session end interrupt enable */
-#define	OTGSC_BSVIE	BIT(27)	/* B session valid interrupt enable */
-#define	OTGSC_ASVIE	BIT(26)	/* A session valid interrupt enable */
-#define	OTGSC_AVVIE	BIT(25)	/* A VBUS valid interrupt enable */
-#define	OTGSC_IDIE	BIT(24)	/* USB ID interrupt enable */
-#define	OTGSC_DPIS	BIT(22)	/* data pulse interrupt status */
-#define	OTGSC_MSS	BIT(21)	/* 1 ms timer interrupt status */
-#define	OTGSC_BSEIS	BIT(20)	/* B session end interrupt status */
-#define	OTGSC_BSVIS	BIT(19)	/* B session valid interrupt status */
-#define	OTGSC_ASVIS	BIT(18)	/* A session valid interrupt status */
-#define	OTGSC_AVVIS	BIT(17)	/* A VBUS valid interrupt status */
-#define	OTGSC_IDIS	BIT(16)	/* USB ID interrupt status */
-#define	OTGSC_DPS	BIT(14)	/* data bus pulsing status */
-#define	OTGSC_MST	BIT(13)	/* 1 ms timer toggle */
-#define	OTGSC_BSE	BIT(12)	/* B session end */
-#define	OTGSC_BSV	BIT(11)	/* B session valid */
-#define	OTGSC_ASV	BIT(10)	/* A session valid */
-#define	OTGSC_AVV	BIT(9)	/* A VBUS valid */
-#define	OTGSC_USBID	BIT(8)	/* USB ID */
-#define	OTGSC_HABA	BIT(7)	/* hw assist B-disconnect to A-connect */
-#define	OTGSC_HADP	BIT(6)	/* hw assist data pulse */
-#define	OTGSC_IDPU	BIT(5)	/* ID pullup */
-#define	OTGSC_DP	BIT(4)	/* data pulsing */
-#define	OTGSC_OT	BIT(3)	/* OTG termination */
-#define	OTGSC_HAAR	BIT(2)	/* hw assist auto reset */
-#define	OTGSC_VC	BIT(1)	/* VBUS charge */
-#define	OTGSC_VD	BIT(0)	/* VBUS discharge */
-	u32	usbmode;
-#define	MODE_VBPS	BIT(5)	/* R/W VBUS power select */
-#define	MODE_SDIS	BIT(4)	/* R/W stream disable mode */
-#define	MODE_SLOM	BIT(3)	/* R/W setup lockout mode */
-#define	MODE_ENSE	BIT(2)	/* endian select */
-#define	MODE_CM(u)	(((u)>>0)&3)	/* bits 1:0, controller mode */
-#define	MODE_IDLE	0
-#define	MODE_DEVICE	2
-#define	MODE_HOST	3
-	u8	_reserved9[0x100-0xfc];
-	/* offset: 0x100 */
-	u32	endptnak;
-#define	EPTN(e)		\
-	(((e)>>16)&0xffff)	/* bits 31:16, TX endpoint NAK */
-#define	EPRN(e)		\
-	(((e)>>0)&0xffff)	/* bits 15:0, RX endpoint NAK */
-	u32	endptnaken;
-#define	EPTNE(e)	\
-	(((e)>>16)&0xffff)	/* bits 31:16, TX endpoint NAK enable */
-#define	EPRNE(e)	\
-	(((e)>>0)&0xffff)	/* bits 15:0, RX endpoint NAK enable */
-	u32	endptsetupstat;
-#define	SETUPSTAT_MASK		(0xffff << 0)	/* bits 15:0 */
-#define EP0SETUPSTAT_MASK	1
-	u32	endptprime;
-/* bits 31:16, prime endpoint transmit buffer */
-#define	PETB(e)		(((e)>>16)&0xffff)
-/* bits 15:0, prime endpoint receive buffer */
-#define	PERB(e)		(((e)>>0)&0xffff)
-	/* offset: 0x110 */
-	u32	endptflush;
-/* bits 31:16, flush endpoint transmit buffer */
-#define	FETB(e)		(((e)>>16)&0xffff)
-/* bits 15:0, flush endpoint receive buffer */
-#define	FERB(e)		(((e)>>0)&0xffff)
-	u32	endptstat;
-/* bits 31:16, endpoint transmit buffer ready */
-#define	ETBR(e)		(((e)>>16)&0xffff)
-/* bits 15:0, endpoint receive buffer ready */
-#define	ERBR(e)		(((e)>>0)&0xffff)
-	u32	endptcomplete;
-/* bits 31:16, endpoint transmit complete event */
-#define	ETCE(e)		(((e)>>16)&0xffff)
-/* bits 15:0, endpoint receive complete event */
-#define	ERCE(e)		(((e)>>0)&0xffff)
-	/* offset: 0x11c */
-	u32	endptctrl[16];
-#define	EPCTRL_TXE	BIT(23)	/* TX endpoint enable */
-#define	EPCTRL_TXR	BIT(22)	/* TX data toggle reset */
-#define	EPCTRL_TXI	BIT(21)	/* TX data toggle inhibit */
-#define	EPCTRL_TXT(e)	(((e)>>18)&3)	/* bits 19:18, TX endpoint type */
-#define	EPCTRL_TXT_SHIFT	18
-#define	EPCTRL_TXD	BIT(17)	/* TX endpoint data source */
-#define	EPCTRL_TXS	BIT(16)	/* TX endpoint STALL */
-#define	EPCTRL_RXE	BIT(7)	/* RX endpoint enable */
-#define	EPCTRL_RXR	BIT(6)	/* RX data toggle reset */
-#define	EPCTRL_RXI	BIT(5)	/* RX data toggle inhibit */
-#define	EPCTRL_RXT(e)	(((e)>>2)&3)	/* bits 3:2, RX endpoint type */
-#define	EPCTRL_RXT_SHIFT	2	/* bits 19:18, TX endpoint type */
-#define	EPCTRL_RXD	BIT(1)	/* RX endpoint data sink */
-#define	EPCTRL_RXS	BIT(0)	/* RX endpoint STALL */
-} __attribute__ ((packed));
-
-#endif /* __LANGWELL_UDC_H */
-
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 47428388823..86c0b451745 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -1,7 +1,7 @@
 /*
  * USB Serial Converter stuff
  *
- *	Copyright (C) 1999 - 2005
+ *	Copyright (C) 1999 - 2012
  *	    Greg Kroah-Hartman (greg@kroah.com)
  *
  *	This program is free software; you can redistribute it and/or modify
@@ -249,6 +249,7 @@ struct usb_serial_driver {
 
 	int (*suspend)(struct usb_serial *serial, pm_message_t message);
 	int (*resume)(struct usb_serial *serial);
+	int (*reset_resume)(struct usb_serial *serial);
 
 	/* serial function calls */
 	/* Called by console and by the tty layer */
@@ -292,16 +293,11 @@ struct usb_serial_driver {
 #define to_usb_serial_driver(d) \
 	container_of(d, struct usb_serial_driver, driver)
 
-extern int usb_serial_register_drivers(struct usb_driver *udriver,
-		struct usb_serial_driver * const serial_drivers[]);
-extern void usb_serial_deregister_drivers(struct usb_driver *udriver,
-		struct usb_serial_driver * const serial_drivers[]);
+extern int usb_serial_register_drivers(struct usb_serial_driver *const serial_drivers[],
+		const char *name, const struct usb_device_id *id_table);
+extern void usb_serial_deregister_drivers(struct usb_serial_driver *const serial_drivers[]);
 extern void usb_serial_port_softint(struct usb_serial_port *port);
 
-extern int usb_serial_probe(struct usb_interface *iface,
-			    const struct usb_device_id *id);
-extern void usb_serial_disconnect(struct usb_interface *iface);
-
 extern int usb_serial_suspend(struct usb_interface *intf, pm_message_t message);
 extern int usb_serial_resume(struct usb_interface *intf);
 
@@ -400,8 +396,8 @@ do {									\
 
 /*
  * module_usb_serial_driver() - Helper macro for registering a USB Serial driver
- * @__usb_driver: usb_driver struct to register
  * @__serial_drivers: list of usb_serial drivers to register
+ * @__ids: all device ids that @__serial_drivers bind to
  *
  * Helper macro for USB serial drivers which do not do anything special
  * in module init/exit. This eliminates a lot of boilerplate. Each
@@ -409,9 +405,21 @@ do {									\
  * module_init() and module_exit()
  *
  */
-#define module_usb_serial_driver(__usb_driver, __serial_drivers)	\
-	module_driver(__usb_driver, usb_serial_register_drivers,	\
-		       usb_serial_deregister_drivers, __serial_drivers)
+#define usb_serial_module_driver(__name, __serial_drivers, __ids)	\
+static int __init usb_serial_module_init(void)				\
+{									\
+	return usb_serial_register_drivers(__serial_drivers,		\
+					   __name, __ids);		\
+}									\
+module_init(usb_serial_module_init);					\
+static void __exit usb_serial_module_exit(void)				\
+{									\
+	usb_serial_deregister_drivers(__serial_drivers);		\
+}									\
+module_exit(usb_serial_module_exit);
+
+#define module_usb_serial_driver(__serial_drivers, __ids)		\
+	usb_serial_module_driver(KBUILD_MODNAME, __serial_drivers, __ids)
 
 #endif /* __LINUX_USB_SERIAL_H */