Merge tag 'clk-for-linus-3.16' of git://git.linaro.org/people/mike.turquette/linux into next

Pull clock framework updates from Mike Turquette:
 "The clock framework changes for 3.16 are pretty typical: mostly clock
  driver additions and fixes.  There are additions to the clock core
  code for some of the basic types (e.g. the common divider type has
  some fixes and featured added to it).

  One minor annoyance is a last-minute dependency that wasn't handled
  quite right.  Commit ba0fae3b06a6 ("clk: berlin: add core clock driver
  for BG2/BG2CD") in this pull request depends on
  include/dt-bindings/clock/berlin2.h, which is already in your tree via
  the arm-soc pull request.  Building for the berlin platform will break
  when the clk tree is built on it's own, but merged into your master
  branch everything should be fine"

* tag 'clk-for-linus-3.16' of git://git.linaro.org/people/mike.turquette/linux: (75 commits)
  mmc: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs
  clk: export __clk_round_rate for providers
  clk: versatile: free icst on error return
  clk: qcom: Return error pointers for unimplemented clocks
  clk: qcom: Support msm8974pro global clock control hardware
  clk: qcom: Properly support display clocks on msm8974
  clk: qcom: Support display RCG clocks
  clk: qcom: Return highest rate when round_rate() exceeds plan
  clk: qcom: Fix mmcc-8974's PLL configurations
  clk: qcom: Fix clk_rcg2_is_enabled() check
  clk: berlin: add core clock driver for BG2Q
  clk: berlin: add core clock driver for BG2/BG2CD
  clk: berlin: add driver for BG2x complex divider cells
  clk: berlin: add driver for BG2x simple PLLs
  clk: berlin: add driver for BG2x audio/video PLL
  clk: st: Terminate of match table
  clk/exynos4: Fix compilation warning
  ARM: shmobile: r8a7779: Add clock index macros for DT sources
  clk: divider: Fix overflow in clk_divider_bestdiv
  clk: u300: Terminate of match table
  ...

3 files changed, 95 insertions, 57 deletions

diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index f295bab1865..0c287dbbb14 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -40,14 +40,14 @@ struct dentry;
  * through the clk_* api.
  *
  * @prepare:	Prepare the clock for enabling. This must not return until
- * 		the clock is fully prepared, and it's safe to call clk_enable.
- * 		This callback is intended to allow clock implementations to
- * 		do any initialisation that may sleep. Called with
- * 		prepare_lock held.
+ *		the clock is fully prepared, and it's safe to call clk_enable.
+ *		This callback is intended to allow clock implementations to
+ *		do any initialisation that may sleep. Called with
+ *		prepare_lock held.
  *
  * @unprepare:	Release the clock from its prepared state. This will typically
- * 		undo any work done in the @prepare callback. Called with
- * 		prepare_lock held.
+ *		undo any work done in the @prepare callback. Called with
+ *		prepare_lock held.
  *
  * @is_prepared: Queries the hardware to determine if the clock is prepared.
  *		This function is allowed to sleep. Optional, if this op is not
@@ -58,16 +58,16 @@ struct dentry;
  *		Called with prepare mutex held. This function may sleep.
  *
  * @enable:	Enable the clock atomically. This must not return until the
- * 		clock is generating a valid clock signal, usable by consumer
- * 		devices. Called with enable_lock held. This function must not
- * 		sleep.
+ *		clock is generating a valid clock signal, usable by consumer
+ *		devices. Called with enable_lock held. This function must not
+ *		sleep.
  *
  * @disable:	Disable the clock atomically. Called with enable_lock held.
- * 		This function must not sleep.
+ *		This function must not sleep.
  *
  * @is_enabled:	Queries the hardware to determine if the clock is enabled.
- * 		This function must not sleep. Optional, if this op is not
- * 		set then the enable count will be used.
+ *		This function must not sleep. Optional, if this op is not
+ *		set then the enable count will be used.
  *
  * @disable_unused: Disable the clock atomically.  Only called from
  *		clk_disable_unused for gate clocks with special needs.
@@ -75,34 +75,35 @@ struct dentry;
  *		sleep.
  *
  * @recalc_rate	Recalculate the rate of this clock, by querying hardware. The
- * 		parent rate is an input parameter.  It is up to the caller to
- * 		ensure that the prepare_mutex is held across this call.
- * 		Returns the calculated rate.  Optional, but recommended - if
- * 		this op is not set then clock rate will be initialized to 0.
+ *		parent rate is an input parameter.  It is up to the caller to
+ *		ensure that the prepare_mutex is held across this call.
+ *		Returns the calculated rate.  Optional, but recommended - if
+ *		this op is not set then clock rate will be initialized to 0.
  *
  * @round_rate:	Given a target rate as input, returns the closest rate actually
- * 		supported by the clock.
+ *		supported by the clock. The parent rate is an input/output
+ *		parameter.
  *
  * @determine_rate: Given a target rate as input, returns the closest rate
  *		actually supported by the clock, and optionally the parent clock
  *		that should be used to provide the clock rate.
  *
- * @get_parent:	Queries the hardware to determine the parent of a clock.  The
- * 		return value is a u8 which specifies the index corresponding to
- * 		the parent clock.  This index can be applied to either the
- * 		.parent_names or .parents arrays.  In short, this function
- * 		translates the parent value read from hardware into an array
- * 		index.  Currently only called when the clock is initialized by
- * 		__clk_init.  This callback is mandatory for clocks with
- * 		multiple parents.  It is optional (and unnecessary) for clocks
- * 		with 0 or 1 parents.
- *
  * @set_parent:	Change the input source of this clock; for clocks with multiple
- * 		possible parents specify a new parent by passing in the index
- * 		as a u8 corresponding to the parent in either the .parent_names
- * 		or .parents arrays.  This function in affect translates an
- * 		array index into the value programmed into the hardware.
- * 		Returns 0 on success, -EERROR otherwise.
+ *		possible parents specify a new parent by passing in the index
+ *		as a u8 corresponding to the parent in either the .parent_names
+ *		or .parents arrays.  This function in affect translates an
+ *		array index into the value programmed into the hardware.
+ *		Returns 0 on success, -EERROR otherwise.
+ *
+ * @get_parent:	Queries the hardware to determine the parent of a clock.  The
+ *		return value is a u8 which specifies the index corresponding to
+ *		the parent clock.  This index can be applied to either the
+ *		.parent_names or .parents arrays.  In short, this function
+ *		translates the parent value read from hardware into an array
+ *		index.  Currently only called when the clock is initialized by
+ *		__clk_init.  This callback is mandatory for clocks with
+ *		multiple parents.  It is optional (and unnecessary) for clocks
+ *		with 0 or 1 parents.
  *
  * @set_rate:	Change the rate of this clock. The requested rate is specified
  *		by the second argument, which should typically be the return
@@ -110,13 +111,6 @@ struct dentry;
  *		which is likely helpful for most .set_rate implementation.
  *		Returns 0 on success, -EERROR otherwise.
  *
- * @recalc_accuracy: Recalculate the accuracy of this clock. The clock accuracy
- *		is expressed in ppb (parts per billion). The parent accuracy is
- *		an input parameter.
- *		Returns the calculated accuracy.  Optional - if	this op is not
- *		set then clock accuracy will be initialized to parent accuracy
- *		or 0 (perfect clock) if clock has no parent.
- *
  * @set_rate_and_parent: Change the rate and the parent of this clock. The
  *		requested rate is specified by the second argument, which
  *		should typically be the return of .round_rate call.  The
@@ -128,6 +122,18 @@ struct dentry;
  *		separately via calls to .set_parent and .set_rate.
  *		Returns 0 on success, -EERROR otherwise.
  *
+ * @recalc_accuracy: Recalculate the accuracy of this clock. The clock accuracy
+ *		is expressed in ppb (parts per billion). The parent accuracy is
+ *		an input parameter.
+ *		Returns the calculated accuracy.  Optional - if	this op is not
+ *		set then clock accuracy will be initialized to parent accuracy
+ *		or 0 (perfect clock) if clock has no parent.
+ *
+ * @init:	Perform platform-specific initialization magic.
+ *		This is not not used by any of the basic clock types.
+ *		Please consider other ways of solving initialization problems
+ *		before using this callback, as its use is discouraged.
+ *
  * @debug_init:	Set up type-specific debugfs entries for this clock.  This
  *		is called once, after the debugfs directory entry for this
  *		clock has been created.  The dentry pointer representing that
@@ -157,15 +163,15 @@ struct clk_ops {
 	void		(*disable_unused)(struct clk_hw *hw);
 	unsigned long	(*recalc_rate)(struct clk_hw *hw,
 					unsigned long parent_rate);
-	long		(*round_rate)(struct clk_hw *hw, unsigned long,
-					unsigned long *);
+	long		(*round_rate)(struct clk_hw *hw, unsigned long rate,
+					unsigned long *parent_rate);
 	long		(*determine_rate)(struct clk_hw *hw, unsigned long rate,
 					unsigned long *best_parent_rate,
 					struct clk **best_parent_clk);
 	int		(*set_parent)(struct clk_hw *hw, u8 index);
 	u8		(*get_parent)(struct clk_hw *hw);
-	int		(*set_rate)(struct clk_hw *hw, unsigned long,
-				    unsigned long);
+	int		(*set_rate)(struct clk_hw *hw, unsigned long rate,
+				    unsigned long parent_rate);
 	int		(*set_rate_and_parent)(struct clk_hw *hw,
 				    unsigned long rate,
 				    unsigned long parent_rate, u8 index);
@@ -254,12 +260,12 @@ void of_fixed_clk_setup(struct device_node *np);
  *
  * Flags:
  * CLK_GATE_SET_TO_DISABLE - by default this clock sets the bit at bit_idx to
- * 	enable the clock.  Setting this flag does the opposite: setting the bit
- * 	disable the clock and clearing it enables the clock
+ *	enable the clock.  Setting this flag does the opposite: setting the bit
+ *	disable the clock and clearing it enables the clock
  * CLK_GATE_HIWORD_MASK - The gate settings are only in lower 16-bit
- *   of this register, and mask of gate bits are in higher 16-bit of this
- *   register.  While setting the gate bits, higher 16-bit should also be
- *   updated to indicate changing gate bits.
+ *	of this register, and mask of gate bits are in higher 16-bit of this
+ *	register.  While setting the gate bits, higher 16-bit should also be
+ *	updated to indicate changing gate bits.
  */
 struct clk_gate {
 	struct clk_hw hw;
@@ -298,20 +304,24 @@ struct clk_div_table {
  *
  * Flags:
  * CLK_DIVIDER_ONE_BASED - by default the divisor is the value read from the
- * 	register plus one.  If CLK_DIVIDER_ONE_BASED is set then the divider is
- * 	the raw value read from the register, with the value of zero considered
+ *	register plus one.  If CLK_DIVIDER_ONE_BASED is set then the divider is
+ *	the raw value read from the register, with the value of zero considered
  *	invalid, unless CLK_DIVIDER_ALLOW_ZERO is set.
  * CLK_DIVIDER_POWER_OF_TWO - clock divisor is 2 raised to the value read from
- * 	the hardware register
+ *	the hardware register
  * CLK_DIVIDER_ALLOW_ZERO - Allow zero divisors.  For dividers which have
  *	CLK_DIVIDER_ONE_BASED set, it is possible to end up with a zero divisor.
  *	Some hardware implementations gracefully handle this case and allow a
  *	zero divisor by not modifying their input clock
  *	(divide by one / bypass).
  * CLK_DIVIDER_HIWORD_MASK - The divider settings are only in lower 16-bit
- *   of this register, and mask of divider bits are in higher 16-bit of this
- *   register.  While setting the divider bits, higher 16-bit should also be
- *   updated to indicate changing divider bits.
+ *	of this register, and mask of divider bits are in higher 16-bit of this
+ *	register.  While setting the divider bits, higher 16-bit should also be
+ *	updated to indicate changing divider bits.
+ * CLK_DIVIDER_ROUND_CLOSEST - Makes the best calculated divider to be rounded
+ *	to the closest integer instead of the up one.
+ * CLK_DIVIDER_READ_ONLY - The divider settings are preconfigured and should
+ *	not be changed by the clock framework.
  */
 struct clk_divider {
 	struct clk_hw	hw;
@@ -327,8 +337,11 @@ struct clk_divider {
 #define CLK_DIVIDER_POWER_OF_TWO	BIT(1)
 #define CLK_DIVIDER_ALLOW_ZERO		BIT(2)
 #define CLK_DIVIDER_HIWORD_MASK		BIT(3)
+#define CLK_DIVIDER_ROUND_CLOSEST	BIT(4)
+#define CLK_DIVIDER_READ_ONLY		BIT(5)
 
 extern const struct clk_ops clk_divider_ops;
+extern const struct clk_ops clk_divider_ro_ops;
 struct clk *clk_register_divider(struct device *dev, const char *name,
 		const char *parent_name, unsigned long flags,
 		void __iomem *reg, u8 shift, u8 width,
@@ -356,9 +369,9 @@ struct clk *clk_register_divider_table(struct device *dev, const char *name,
  * CLK_MUX_INDEX_ONE - register index starts at 1, not 0
  * CLK_MUX_INDEX_BIT - register index is a single bit (power of two)
  * CLK_MUX_HIWORD_MASK - The mux settings are only in lower 16-bit of this
- *   register, and mask of mux bits are in higher 16-bit of this register.
- *   While setting the mux bits, higher 16-bit should also be updated to
- *   indicate changing mux bits.
+ *	register, and mask of mux bits are in higher 16-bit of this register.
+ *	While setting the mux bits, higher 16-bit should also be updated to
+ *	indicate changing mux bits.
  */
 struct clk_mux {
 	struct clk_hw	hw;
diff --git a/include/linux/clk/shmobile.h b/include/linux/clk/shmobile.h
index f9bf080a112..9f8a14041dd 100644
--- a/include/linux/clk/shmobile.h
+++ b/include/linux/clk/shmobile.h
@@ -1,7 +1,9 @@
 /*
  * Copyright 2013 Ideas On Board SPRL
+ * Copyright 2013, 2014 Horms Solutions Ltd.
  *
  * Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ * Contact: Simon Horman <horms@verge.net.au>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -14,6 +16,7 @@
 
 #include <linux/types.h>
 
+void r8a7779_clocks_init(u32 mode);
 void rcar_gen2_clocks_init(u32 mode);
 
 #endif
diff --git a/include/linux/clk/sunxi.h b/include/linux/clk/sunxi.h
new file mode 100644
index 00000000000..aed28c4451d
--- /dev/null
+++ b/include/linux/clk/sunxi.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2013 - Hans de Goede <hdegoede@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_CLK_SUNXI_H_
+#define __LINUX_CLK_SUNXI_H_
+
+#include <linux/clk.h>
+
+void clk_sunxi_mmc_phase_control(struct clk *clk, u8 sample, u8 output);
+
+#endif