Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking changes from David Miller:
 "Most importantly this should cure the ipv4-mapped ipv6 socket TCP
  crashes some people were seeing, otherwise:

   1) Fix e1000e autonegotiation handling regression, from Tushar Dave.

   2) Fix TX data corruption race on e1000e down, also from Tushar Dave.

   3) Fix bfin_sir IRDA driver build, from Sonic Zhang.

   4) AF_PACKET mmap() tests a flag in the TX ring shared between
      userspace and the kernel for an internal consistency check.  It
      really shouldn't do this to validate the kernel's own behavior
      because the user can corrupt it to be any value at all.  From
      Daniel Borkmann.

   5) Fix TCP metrics leak on netns dismantle, from Eric Dumazet.

   6) Orphan the anonymous TCP socket from the SKB in
      ip_send_unicast_reply() so that the rest of the stack needn't see
      it.  Otherwise we get selinux problems of all sorts, from Eric
      Dumazet.

      This is the best way to fix this since the socket is just a place
      holder for sending packets in a context where we have no real
      socket at all.

   7) Fix TUN detach crashes, from Stanislav Kinsbursky.

   8) dev_set_alias() leaks memory on krealloc() failure, from Alexey
      Khoroshilov.

   9) FIB trie must use call_rcu() not call_rcu_bh(), because this code
      is not universally invoked from software interrupts.  From Eric
      Dumazet.

  10) PPTP looks up ipv4 routes with the wrong network namespace, fix
      from Gao Feng."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits)
  bnx2x: Fix compiler warnings
  af_packet: remove BUG statement in tpacket_destruct_skb
  macvtap: rcu_dereference outside read-lock section
  codel: refine one condition to avoid a nul rec_inv_sqrt
  ixgbe: add missing braces
  ipv4: fix ip_send_skb()
  net: tcp: ipv6_mapped needs sk_rx_dst_set method
  ipv4: tcp: unicast_sock should not land outside of TCP stack
  bnx2x: Fix recovery flow cleanup during probe
  bnx2x: fix unload previous driver flow when flr-capable
  tun: don't zeroize sock->file on detach
  igb: Fix register defines for all non-82575 hardware
  e1000e: fix panic while dumping packets on Tx hang with IOMMU
  igb: fix panic while dumping packets on Tx hang with IOMMU
  tcp: must free metrics at net dismantle
  net/stmmac: mark probe function as __devinit
  lpc_eth: remove obsolete ifdefs
  net/core: Fix potential memory leak in dev_set_alias()
  cdc-phonet: Don't leak in usbpn_open
  batman-adv: Fix mem leak in the batadv_tt_local_event() function
  ...

1 files changed, 13 insertions, 12 deletions

diff --git a/include/linux/can.h b/include/linux/can.h
index 018055efc03..e52958d7c2d 100644
--- a/include/linux/can.h
+++ b/include/linux/can.h
@@ -74,20 +74,21 @@ struct can_frame {
 /*
  * defined bits for canfd_frame.flags
  *
- * As the default for CAN FD should be to support the high data rate in the
- * payload section of the frame (HDR) and to support up to 64 byte in the
- * data section (EDL) the bits are only set in the non-default case.
- * Btw. as long as there's no real implementation for CAN FD network driver
- * these bits are only preliminary.
+ * The use of struct canfd_frame implies the Extended Data Length (EDL) bit to
+ * be set in the CAN frame bitstream on the wire. The EDL bit switch turns
+ * the CAN controllers bitstream processor into the CAN FD mode which creates
+ * two new options within the CAN FD frame specification:
  *
- * RX: NOHDR/NOEDL - info about received CAN FD frame
- *     ESI         - bit from originating CAN controller
- * TX: NOHDR/NOEDL - control per-frame settings if supported by CAN controller
- *     ESI         - bit is set by local CAN controller
+ * Bit Rate Switch - to indicate a second bitrate is/was used for the payload
+ * Error State Indicator - represents the error state of the transmitting node
+ *
+ * As the CANFD_ESI bit is internally generated by the transmitting CAN
+ * controller only the CANFD_BRS bit is relevant for real CAN controllers when
+ * building a CAN FD frame for transmission. Setting the CANFD_ESI bit can make
+ * sense for virtual CAN interfaces to test applications with echoed frames.
  */
-#define CANFD_NOHDR 0x01 /* frame without high data rate */
-#define CANFD_NOEDL 0x02 /* frame without extended data length */
-#define CANFD_ESI   0x04 /* error state indicator */
+#define CANFD_BRS 0x01 /* bit rate switch (second bitrate for payload data) */
+#define CANFD_ESI 0x02 /* error state indicator of the transmitting node */
 
 /**
  * struct canfd_frame - CAN flexible data rate frame structure