summaryrefslogtreecommitdiffstats
path: root/include/linux
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2008-12-28 12:49:40 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2008-12-28 12:49:40 -0800
commit0191b625ca5a46206d2fb862bb08f36f2fcb3b31 (patch)
tree454d1842b1833d976da62abcbd5c47521ebe9bd7 /include/linux
parent54a696bd07c14d3b1192d03ce7269bc59b45209a (diff)
parenteb56092fc168bf5af199d47af50c0d84a96db898 (diff)
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1429 commits) net: Allow dependancies of FDDI & Tokenring to be modular. igb: Fix build warning when DCA is disabled. net: Fix warning fallout from recent NAPI interface changes. gro: Fix potential use after free sfc: If AN is enabled, always read speed/duplex from the AN advertising bits sfc: When disabling the NIC, close the device rather than unregistering it sfc: SFT9001: Add cable diagnostics sfc: Add support for multiple PHY self-tests sfc: Merge top-level functions for self-tests sfc: Clean up PHY mode management in loopback self-test sfc: Fix unreliable link detection in some loopback modes sfc: Generate unique names for per-NIC workqueues 802.3ad: use standard ethhdr instead of ad_header 802.3ad: generalize out mac address initializer 802.3ad: initialize ports LACPDU from const initializer 802.3ad: remove typedef around ad_system 802.3ad: turn ports is_individual into a bool 802.3ad: turn ports is_enabled into a bool 802.3ad: make ntt bool ixgbe: Fix set_ringparam in ixgbe to use the same memory pools. ... Fixed trivial IPv4/6 address printing conflicts in fs/cifs/connect.c due to the conversion to %pI (in this networking merge) and the addition of doing IPv6 addresses (from the earlier merge of CIFS).
Diffstat (limited to 'include/linux')
-rw-r--r--include/linux/atm.h17
-rw-r--r--include/linux/atmdev.h15
-rw-r--r--include/linux/cgroup_subsys.h6
-rw-r--r--include/linux/dcbnl.h340
-rw-r--r--include/linux/dccp.h42
-rw-r--r--include/linux/etherdevice.h46
-rw-r--r--include/linux/ethtool.h2
-rw-r--r--include/linux/fddidevice.h1
-rw-r--r--include/linux/filter.h3
-rw-r--r--include/linux/fsl_devices.h18
-rw-r--r--include/linux/hdlc.h4
-rw-r--r--include/linux/hippidevice.h4
-rw-r--r--include/linux/ieee80211.h212
-rw-r--r--include/linux/if.h1
-rw-r--r--include/linux/if_arp.h3
-rw-r--r--include/linux/in.h4
-rw-r--r--include/linux/ipv6.h1
-rw-r--r--include/linux/kernel.h12
-rw-r--r--include/linux/list_nulls.h94
-rw-r--r--include/linux/mdio-gpio.h25
-rw-r--r--include/linux/mii.h33
-rw-r--r--include/linux/mroute6.h26
-rw-r--r--include/linux/netdevice.h400
-rw-r--r--include/linux/netfilter_bridge/ebtables.h3
-rw-r--r--include/linux/netfilter_ipv4/ipt_policy.h2
-rw-r--r--include/linux/netfilter_ipv6/ip6t_policy.h2
-rw-r--r--include/linux/netlink.h3
-rw-r--r--include/linux/netpoll.h5
-rw-r--r--include/linux/nl80211.h223
-rw-r--r--include/linux/phy.h2
-rw-r--r--include/linux/pkt_cls.h14
-rw-r--r--include/linux/pkt_sched.h16
-rw-r--r--include/linux/rculist_nulls.h110
-rw-r--r--include/linux/rfkill.h8
-rw-r--r--include/linux/rtnetlink.h5
-rw-r--r--include/linux/skbuff.h54
-rw-r--r--include/linux/smsc911x.h47
-rw-r--r--include/linux/snmp.h3
-rw-r--r--include/linux/sunrpc/svc_xprt.h8
-rw-r--r--include/linux/virtio_net.h9
-rw-r--r--include/linux/xfrm.h14
41 files changed, 1563 insertions, 274 deletions
diff --git a/include/linux/atm.h b/include/linux/atm.h
index c791ddd9693..d3b292174ae 100644
--- a/include/linux/atm.h
+++ b/include/linux/atm.h
@@ -231,10 +231,21 @@ static __inline__ int atmpvc_addr_in_use(struct sockaddr_atmpvc addr)
*/
struct atmif_sioc {
- int number;
- int length;
- void __user *arg;
+ int number;
+ int length;
+ void __user *arg;
};
+#ifdef __KERNEL__
+#ifdef CONFIG_COMPAT
+#include <linux/compat.h>
+struct compat_atmif_sioc {
+ int number;
+ int length;
+ compat_uptr_t arg;
+};
+#endif
+#endif
+
typedef unsigned short atm_backend_t;
#endif
diff --git a/include/linux/atmdev.h b/include/linux/atmdev.h
index a3d07c29d16..086e5c362d3 100644
--- a/include/linux/atmdev.h
+++ b/include/linux/atmdev.h
@@ -100,6 +100,10 @@ struct atm_dev_stats {
/* use backend to make new if */
#define ATM_ADDPARTY _IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf)
/* add party to p2mp call */
+#ifdef CONFIG_COMPAT
+/* It actually takes struct sockaddr_atmsvc, not struct atm_iobuf */
+#define COMPAT_ATM_ADDPARTY _IOW('a', ATMIOC_SPECIAL+4,struct compat_atm_iobuf)
+#endif
#define ATM_DROPPARTY _IOW('a', ATMIOC_SPECIAL+5,int)
/* drop party from p2mp call */
@@ -224,6 +228,13 @@ struct atm_cirange {
extern struct proc_dir_entry *atm_proc_root;
#endif
+#ifdef CONFIG_COMPAT
+#include <linux/compat.h>
+struct compat_atm_iobuf {
+ int length;
+ compat_uptr_t buffer;
+};
+#endif
struct k_atm_aal_stats {
#define __HANDLE_ITEM(i) atomic_t i
@@ -379,6 +390,10 @@ struct atmdev_ops { /* only send is required */
int (*open)(struct atm_vcc *vcc);
void (*close)(struct atm_vcc *vcc);
int (*ioctl)(struct atm_dev *dev,unsigned int cmd,void __user *arg);
+#ifdef CONFIG_COMPAT
+ int (*compat_ioctl)(struct atm_dev *dev,unsigned int cmd,
+ void __user *arg);
+#endif
int (*getsockopt)(struct atm_vcc *vcc,int level,int optname,
void __user *optval,int optlen);
int (*setsockopt)(struct atm_vcc *vcc,int level,int optname,
diff --git a/include/linux/cgroup_subsys.h b/include/linux/cgroup_subsys.h
index 9c22396e8b5..9c8d31bacf4 100644
--- a/include/linux/cgroup_subsys.h
+++ b/include/linux/cgroup_subsys.h
@@ -54,3 +54,9 @@ SUBSYS(freezer)
#endif
/* */
+
+#ifdef CONFIG_NET_CLS_CGROUP
+SUBSYS(net_cls)
+#endif
+
+/* */
diff --git a/include/linux/dcbnl.h b/include/linux/dcbnl.h
new file mode 100644
index 00000000000..b0ef274e003
--- /dev/null
+++ b/include/linux/dcbnl.h
@@ -0,0 +1,340 @@
+/*
+ * Copyright (c) 2008, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * Author: Lucy Liu <lucy.liu@intel.com>
+ */
+
+#ifndef __LINUX_DCBNL_H__
+#define __LINUX_DCBNL_H__
+
+#define DCB_PROTO_VERSION 1
+
+struct dcbmsg {
+ unsigned char dcb_family;
+ __u8 cmd;
+ __u16 dcb_pad;
+};
+
+/**
+ * enum dcbnl_commands - supported DCB commands
+ *
+ * @DCB_CMD_UNDEFINED: unspecified command to catch errors
+ * @DCB_CMD_GSTATE: request the state of DCB in the device
+ * @DCB_CMD_SSTATE: set the state of DCB in the device
+ * @DCB_CMD_PGTX_GCFG: request the priority group configuration for Tx
+ * @DCB_CMD_PGTX_SCFG: set the priority group configuration for Tx
+ * @DCB_CMD_PGRX_GCFG: request the priority group configuration for Rx
+ * @DCB_CMD_PGRX_SCFG: set the priority group configuration for Rx
+ * @DCB_CMD_PFC_GCFG: request the priority flow control configuration
+ * @DCB_CMD_PFC_SCFG: set the priority flow control configuration
+ * @DCB_CMD_SET_ALL: apply all changes to the underlying device
+ * @DCB_CMD_GPERM_HWADDR: get the permanent MAC address of the underlying
+ * device. Only useful when using bonding.
+ * @DCB_CMD_GCAP: request the DCB capabilities of the device
+ * @DCB_CMD_GNUMTCS: get the number of traffic classes currently supported
+ * @DCB_CMD_SNUMTCS: set the number of traffic classes
+ * @DCB_CMD_GBCN: set backward congestion notification configuration
+ * @DCB_CMD_SBCN: get backward congestion notification configration.
+ */
+enum dcbnl_commands {
+ DCB_CMD_UNDEFINED,
+
+ DCB_CMD_GSTATE,
+ DCB_CMD_SSTATE,
+
+ DCB_CMD_PGTX_GCFG,
+ DCB_CMD_PGTX_SCFG,
+ DCB_CMD_PGRX_GCFG,
+ DCB_CMD_PGRX_SCFG,
+
+ DCB_CMD_PFC_GCFG,
+ DCB_CMD_PFC_SCFG,
+
+ DCB_CMD_SET_ALL,
+
+ DCB_CMD_GPERM_HWADDR,
+
+ DCB_CMD_GCAP,
+
+ DCB_CMD_GNUMTCS,
+ DCB_CMD_SNUMTCS,
+
+ DCB_CMD_PFC_GSTATE,
+ DCB_CMD_PFC_SSTATE,
+
+ DCB_CMD_BCN_GCFG,
+ DCB_CMD_BCN_SCFG,
+
+ __DCB_CMD_ENUM_MAX,
+ DCB_CMD_MAX = __DCB_CMD_ENUM_MAX - 1,
+};
+
+/**
+ * enum dcbnl_attrs - DCB top-level netlink attributes
+ *
+ * @DCB_ATTR_UNDEFINED: unspecified attribute to catch errors
+ * @DCB_ATTR_IFNAME: interface name of the underlying device (NLA_STRING)
+ * @DCB_ATTR_STATE: enable state of DCB in the device (NLA_U8)
+ * @DCB_ATTR_PFC_STATE: enable state of PFC in the device (NLA_U8)
+ * @DCB_ATTR_PFC_CFG: priority flow control configuration (NLA_NESTED)
+ * @DCB_ATTR_NUM_TC: number of traffic classes supported in the device (NLA_U8)
+ * @DCB_ATTR_PG_CFG: priority group configuration (NLA_NESTED)
+ * @DCB_ATTR_SET_ALL: bool to commit changes to hardware or not (NLA_U8)
+ * @DCB_ATTR_PERM_HWADDR: MAC address of the physical device (NLA_NESTED)
+ * @DCB_ATTR_CAP: DCB capabilities of the device (NLA_NESTED)
+ * @DCB_ATTR_NUMTCS: number of traffic classes supported (NLA_NESTED)
+ * @DCB_ATTR_BCN: backward congestion notification configuration (NLA_NESTED)
+ */
+enum dcbnl_attrs {
+ DCB_ATTR_UNDEFINED,
+
+ DCB_ATTR_IFNAME,
+ DCB_ATTR_STATE,
+ DCB_ATTR_PFC_STATE,
+ DCB_ATTR_PFC_CFG,
+ DCB_ATTR_NUM_TC,
+ DCB_ATTR_PG_CFG,
+ DCB_ATTR_SET_ALL,
+ DCB_ATTR_PERM_HWADDR,
+ DCB_ATTR_CAP,
+ DCB_ATTR_NUMTCS,
+ DCB_ATTR_BCN,
+
+ __DCB_ATTR_ENUM_MAX,
+ DCB_ATTR_MAX = __DCB_ATTR_ENUM_MAX - 1,
+};
+
+/**
+ * enum dcbnl_pfc_attrs - DCB Priority Flow Control user priority nested attrs
+ *
+ * @DCB_PFC_UP_ATTR_UNDEFINED: unspecified attribute to catch errors
+ * @DCB_PFC_UP_ATTR_0: Priority Flow Control value for User Priority 0 (NLA_U8)
+ * @DCB_PFC_UP_ATTR_1: Priority Flow Control value for User Priority 1 (NLA_U8)
+ * @DCB_PFC_UP_ATTR_2: Priority Flow Control value for User Priority 2 (NLA_U8)
+ * @DCB_PFC_UP_ATTR_3: Priority Flow Control value for User Priority 3 (NLA_U8)
+ * @DCB_PFC_UP_ATTR_4: Priority Flow Control value for User Priority 4 (NLA_U8)
+ * @DCB_PFC_UP_ATTR_5: Priority Flow Control value for User Priority 5 (NLA_U8)
+ * @DCB_PFC_UP_ATTR_6: Priority Flow Control value for User Priority 6 (NLA_U8)
+ * @DCB_PFC_UP_ATTR_7: Priority Flow Control value for User Priority 7 (NLA_U8)
+ * @DCB_PFC_UP_ATTR_MAX: highest attribute number currently defined
+ * @DCB_PFC_UP_ATTR_ALL: apply to all priority flow control attrs (NLA_FLAG)
+ *
+ */
+enum dcbnl_pfc_up_attrs {
+ DCB_PFC_UP_ATTR_UNDEFINED,
+
+ DCB_PFC_UP_ATTR_0,
+ DCB_PFC_UP_ATTR_1,
+ DCB_PFC_UP_ATTR_2,
+ DCB_PFC_UP_ATTR_3,
+ DCB_PFC_UP_ATTR_4,
+ DCB_PFC_UP_ATTR_5,
+ DCB_PFC_UP_ATTR_6,
+ DCB_PFC_UP_ATTR_7,
+ DCB_PFC_UP_ATTR_ALL,
+
+ __DCB_PFC_UP_ATTR_ENUM_MAX,
+ DCB_PFC_UP_ATTR_MAX = __DCB_PFC_UP_ATTR_ENUM_MAX - 1,
+};
+
+/**
+ * enum dcbnl_pg_attrs - DCB Priority Group attributes
+ *
+ * @DCB_PG_ATTR_UNDEFINED: unspecified attribute to catch errors
+ * @DCB_PG_ATTR_TC_0: Priority Group Traffic Class 0 configuration (NLA_NESTED)
+ * @DCB_PG_ATTR_TC_1: Priority Group Traffic Class 1 configuration (NLA_NESTED)
+ * @DCB_PG_ATTR_TC_2: Priority Group Traffic Class 2 configuration (NLA_NESTED)
+ * @DCB_PG_ATTR_TC_3: Priority Group Traffic Class 3 configuration (NLA_NESTED)
+ * @DCB_PG_ATTR_TC_4: Priority Group Traffic Class 4 configuration (NLA_NESTED)
+ * @DCB_PG_ATTR_TC_5: Priority Group Traffic Class 5 configuration (NLA_NESTED)
+ * @DCB_PG_ATTR_TC_6: Priority Group Traffic Class 6 configuration (NLA_NESTED)
+ * @DCB_PG_ATTR_TC_7: Priority Group Traffic Class 7 configuration (NLA_NESTED)
+ * @DCB_PG_ATTR_TC_MAX: highest attribute number currently defined
+ * @DCB_PG_ATTR_TC_ALL: apply to all traffic classes (NLA_NESTED)
+ * @DCB_PG_ATTR_BW_ID_0: Percent of link bandwidth for Priority Group 0 (NLA_U8)
+ * @DCB_PG_ATTR_BW_ID_1: Percent of link bandwidth for Priority Group 1 (NLA_U8)
+ * @DCB_PG_ATTR_BW_ID_2: Percent of link bandwidth for Priority Group 2 (NLA_U8)
+ * @DCB_PG_ATTR_BW_ID_3: Percent of link bandwidth for Priority Group 3 (NLA_U8)
+ * @DCB_PG_ATTR_BW_ID_4: Percent of link bandwidth for Priority Group 4 (NLA_U8)
+ * @DCB_PG_ATTR_BW_ID_5: Percent of link bandwidth for Priority Group 5 (NLA_U8)
+ * @DCB_PG_ATTR_BW_ID_6: Percent of link bandwidth for Priority Group 6 (NLA_U8)
+ * @DCB_PG_ATTR_BW_ID_7: Percent of link bandwidth for Priority Group 7 (NLA_U8)
+ * @DCB_PG_ATTR_BW_ID_MAX: highest attribute number currently defined
+ * @DCB_PG_ATTR_BW_ID_ALL: apply to all priority groups (NLA_FLAG)
+ *
+ */
+enum dcbnl_pg_attrs {
+ DCB_PG_ATTR_UNDEFINED,
+
+ DCB_PG_ATTR_TC_0,
+ DCB_PG_ATTR_TC_1,
+ DCB_PG_ATTR_TC_2,
+ DCB_PG_ATTR_TC_3,
+ DCB_PG_ATTR_TC_4,
+ DCB_PG_ATTR_TC_5,
+ DCB_PG_ATTR_TC_6,
+ DCB_PG_ATTR_TC_7,
+ DCB_PG_ATTR_TC_MAX,
+ DCB_PG_ATTR_TC_ALL,
+
+ DCB_PG_ATTR_BW_ID_0,
+ DCB_PG_ATTR_BW_ID_1,
+ DCB_PG_ATTR_BW_ID_2,
+ DCB_PG_ATTR_BW_ID_3,
+ DCB_PG_ATTR_BW_ID_4,
+ DCB_PG_ATTR_BW_ID_5,
+ DCB_PG_ATTR_BW_ID_6,
+ DCB_PG_ATTR_BW_ID_7,
+ DCB_PG_ATTR_BW_ID_MAX,
+ DCB_PG_ATTR_BW_ID_ALL,
+
+ __DCB_PG_ATTR_ENUM_MAX,
+ DCB_PG_ATTR_MAX = __DCB_PG_ATTR_ENUM_MAX - 1,
+};
+
+/**
+ * enum dcbnl_tc_attrs - DCB Traffic Class attributes
+ *
+ * @DCB_TC_ATTR_PARAM_UNDEFINED: unspecified attribute to catch errors
+ * @DCB_TC_ATTR_PARAM_PGID: (NLA_U8) Priority group the traffic class belongs to
+ * Valid values are: 0-7
+ * @DCB_TC_ATTR_PARAM_UP_MAPPING: (NLA_U8) Traffic class to user priority map
+ * Some devices may not support changing the
+ * user priority map of a TC.
+ * @DCB_TC_ATTR_PARAM_STRICT_PRIO: (NLA_U8) Strict priority setting
+ * 0 - none
+ * 1 - group strict
+ * 2 - link strict
+ * @DCB_TC_ATTR_PARAM_BW_PCT: optional - (NLA_U8) If supported by the device and
+ * not configured to use link strict priority,
+ * this is the percentage of bandwidth of the
+ * priority group this traffic class belongs to
+ * @DCB_TC_ATTR_PARAM_ALL: (NLA_FLAG) all traffic class parameters
+ *
+ */
+enum dcbnl_tc_attrs {
+ DCB_TC_ATTR_PARAM_UNDEFINED,
+
+ DCB_TC_ATTR_PARAM_PGID,
+ DCB_TC_ATTR_PARAM_UP_MAPPING,
+ DCB_TC_ATTR_PARAM_STRICT_PRIO,
+ DCB_TC_ATTR_PARAM_BW_PCT,
+ DCB_TC_ATTR_PARAM_ALL,
+
+ __DCB_TC_ATTR_PARAM_ENUM_MAX,
+ DCB_TC_ATTR_PARAM_MAX = __DCB_TC_ATTR_PARAM_ENUM_MAX - 1,
+};
+
+/**
+ * enum dcbnl_cap_attrs - DCB Capability attributes
+ *
+ * @DCB_CAP_ATTR_UNDEFINED: unspecified attribute to catch errors
+ * @DCB_CAP_ATTR_ALL: (NLA_FLAG) all capability parameters
+ * @DCB_CAP_ATTR_PG: (NLA_U8) device supports Priority Groups
+ * @DCB_CAP_ATTR_PFC: (NLA_U8) device supports Priority Flow Control
+ * @DCB_CAP_ATTR_UP2TC: (NLA_U8) device supports user priority to
+ * traffic class mapping
+ * @DCB_CAP_ATTR_PG_TCS: (NLA_U8) bitmap where each bit represents a
+ * number of traffic classes the device
+ * can be configured to use for Priority Groups
+ * @DCB_CAP_ATTR_PFC_TCS: (NLA_U8) bitmap where each bit represents a
+ * number of traffic classes the device can be
+ * configured to use for Priority Flow Control
+ * @DCB_CAP_ATTR_GSP: (NLA_U8) device supports group strict priority
+ * @DCB_CAP_ATTR_BCN: (NLA_U8) device supports Backwards Congestion
+ * Notification
+ */
+enum dcbnl_cap_attrs {
+ DCB_CAP_ATTR_UNDEFINED,
+ DCB_CAP_ATTR_ALL,
+ DCB_CAP_ATTR_PG,
+ DCB_CAP_ATTR_PFC,
+ DCB_CAP_ATTR_UP2TC,
+ DCB_CAP_ATTR_PG_TCS,
+ DCB_CAP_ATTR_PFC_TCS,
+ DCB_CAP_ATTR_GSP,
+ DCB_CAP_ATTR_BCN,
+
+ __DCB_CAP_ATTR_ENUM_MAX,
+ DCB_CAP_ATTR_MAX = __DCB_CAP_ATTR_ENUM_MAX - 1,
+};
+
+/**
+ * enum dcbnl_numtcs_attrs - number of traffic classes
+ *
+ * @DCB_NUMTCS_ATTR_UNDEFINED: unspecified attribute to catch errors
+ * @DCB_NUMTCS_ATTR_ALL: (NLA_FLAG) all traffic class attributes
+ * @DCB_NUMTCS_ATTR_PG: (NLA_U8) number of traffic classes used for
+ * priority groups
+ * @DCB_NUMTCS_ATTR_PFC: (NLA_U8) number of traffic classes which can
+ * support priority flow control
+ */
+enum dcbnl_numtcs_attrs {
+ DCB_NUMTCS_ATTR_UNDEFINED,
+ DCB_NUMTCS_ATTR_ALL,
+ DCB_NUMTCS_ATTR_PG,
+ DCB_NUMTCS_ATTR_PFC,
+
+ __DCB_NUMTCS_ATTR_ENUM_MAX,
+ DCB_NUMTCS_ATTR_MAX = __DCB_NUMTCS_ATTR_ENUM_MAX - 1,
+};
+
+enum dcbnl_bcn_attrs{
+ DCB_BCN_ATTR_UNDEFINED = 0,
+
+ DCB_BCN_ATTR_RP_0,
+ DCB_BCN_ATTR_RP_1,
+ DCB_BCN_ATTR_RP_2,
+ DCB_BCN_ATTR_RP_3,
+ DCB_BCN_ATTR_RP_4,
+ DCB_BCN_ATTR_RP_5,
+ DCB_BCN_ATTR_RP_6,
+ DCB_BCN_ATTR_RP_7,
+ DCB_BCN_ATTR_RP_ALL,
+
+ DCB_BCN_ATTR_BCNA_0,
+ DCB_BCN_ATTR_BCNA_1,
+ DCB_BCN_ATTR_ALPHA,
+ DCB_BCN_ATTR_BETA,
+ DCB_BCN_ATTR_GD,
+ DCB_BCN_ATTR_GI,
+ DCB_BCN_ATTR_TMAX,
+ DCB_BCN_ATTR_TD,
+ DCB_BCN_ATTR_RMIN,
+ DCB_BCN_ATTR_W,
+ DCB_BCN_ATTR_RD,
+ DCB_BCN_ATTR_RU,
+ DCB_BCN_ATTR_WRTT,
+ DCB_BCN_ATTR_RI,
+ DCB_BCN_ATTR_C,
+ DCB_BCN_ATTR_ALL,
+
+ __DCB_BCN_ATTR_ENUM_MAX,
+ DCB_BCN_ATTR_MAX = __DCB_BCN_ATTR_ENUM_MAX - 1,
+};
+
+/**
+ * enum dcb_general_attr_values - general DCB attribute values
+ *
+ * @DCB_ATTR_UNDEFINED: value used to indicate an attribute is not supported
+ *
+ */
+enum dcb_general_attr_values {
+ DCB_ATTR_VALUE_UNDEFINED = 0xff
+};
+
+
+#endif /* __LINUX_DCBNL_H__ */
diff --git a/include/linux/dccp.h b/include/linux/dccp.h
index 6080449fbec..61734e27abb 100644
--- a/include/linux/dccp.h
+++ b/include/linux/dccp.h
@@ -168,6 +168,8 @@ enum {
DCCPO_MIN_CCID_SPECIFIC = 128,
DCCPO_MAX_CCID_SPECIFIC = 255,
};
+/* maximum size of a single TLV-encoded DCCP option (sans type/len bytes) */
+#define DCCP_SINGLE_OPT_MAXLEN 253
/* DCCP CCIDS */
enum {
@@ -176,29 +178,23 @@ enum {
};
/* DCCP features (RFC 4340 section 6.4) */
-enum {
+enum dccp_feature_numbers {
DCCPF_RESERVED = 0,
DCCPF_CCID = 1,
- DCCPF_SHORT_SEQNOS = 2, /* XXX: not yet implemented */
+ DCCPF_SHORT_SEQNOS = 2,
DCCPF_SEQUENCE_WINDOW = 3,
- DCCPF_ECN_INCAPABLE = 4, /* XXX: not yet implemented */
+ DCCPF_ECN_INCAPABLE = 4,
DCCPF_ACK_RATIO = 5,
DCCPF_SEND_ACK_VECTOR = 6,
DCCPF_SEND_NDP_COUNT = 7,
DCCPF_MIN_CSUM_COVER = 8,
- DCCPF_DATA_CHECKSUM = 9, /* XXX: not yet implemented */
+ DCCPF_DATA_CHECKSUM = 9,
/* 10-127 reserved */
DCCPF_MIN_CCID_SPECIFIC = 128,
+ DCCPF_SEND_LEV_RATE = 192, /* RFC 4342, sec. 8.4 */
DCCPF_MAX_CCID_SPECIFIC = 255,
};
-/* this structure is argument to DCCP_SOCKOPT_CHANGE_X */
-struct dccp_so_feat {
- __u8 dccpsf_feat;
- __u8 __user *dccpsf_val;
- __u8 dccpsf_len;
-};
-
/* DCCP socket options */
#define DCCP_SOCKOPT_PACKET_SIZE 1 /* XXX deprecated, without effect */
#define DCCP_SOCKOPT_SERVICE 2
@@ -208,6 +204,10 @@ struct dccp_so_feat {
#define DCCP_SOCKOPT_SERVER_TIMEWAIT 6
#define DCCP_SOCKOPT_SEND_CSCOV 10
#define DCCP_SOCKOPT_RECV_CSCOV 11
+#define DCCP_SOCKOPT_AVAILABLE_CCIDS 12
+#define DCCP_SOCKOPT_CCID 13
+#define DCCP_SOCKOPT_TX_CCID 14
+#define DCCP_SOCKOPT_RX_CCID 15
#define DCCP_SOCKOPT_CCID_RX_INFO 128
#define DCCP_SOCKOPT_CCID_TX_INFO 192
@@ -360,7 +360,6 @@ static inline unsigned int dccp_hdr_len(const struct sk_buff *skb)
#define DCCPF_INITIAL_SEQUENCE_WINDOW 100
#define DCCPF_INITIAL_ACK_RATIO 2
#define DCCPF_INITIAL_CCID DCCPC_CCID2
-#define DCCPF_INITIAL_SEND_ACK_VECTOR 1
/* FIXME: for now we're default to 1 but it should really be 0 */
#define DCCPF_INITIAL_SEND_NDP_COUNT 1
@@ -370,20 +369,11 @@ static inline unsigned int dccp_hdr_len(const struct sk_buff *skb)
* Will be used to pass the state from dccp_request_sock to dccp_sock.
*
* @dccpms_sequence_window - Sequence Window Feature (section 7.5.2)
- * @dccpms_ccid - Congestion Control Id (CCID) (section 10)
- * @dccpms_send_ack_vector - Send Ack Vector Feature (section 11.5)
- * @dccpms_send_ndp_count - Send NDP Count Feature (7.7.2)
- * @dccpms_ack_ratio - Ack Ratio Feature (section 11.3)
* @dccpms_pending - List of features being negotiated
* @dccpms_conf -
*/
struct dccp_minisock {
__u64 dccpms_sequence_window;
- __u8 dccpms_rx_ccid;
- __u8 dccpms_tx_ccid;
- __u8 dccpms_send_ack_vector;
- __u8 dccpms_send_ndp_count;
- __u8 dccpms_ack_ratio;
struct list_head dccpms_pending;
struct list_head dccpms_conf;
};
@@ -411,6 +401,7 @@ extern void dccp_minisock_init(struct dccp_minisock *dmsk);
* @dreq_iss: initial sequence number sent on the Response (RFC 4340, 7.1)
* @dreq_isr: initial sequence number received on the Request
* @dreq_service: service code present on the Request (there is just one)
+ * @dreq_featneg: feature negotiation options for this connection
* The following two fields are analogous to the ones in dccp_sock:
* @dreq_timestamp_echo: last received timestamp to echo (13.1)
* @dreq_timestamp_echo: the time of receiving the last @dreq_timestamp_echo
@@ -420,6 +411,7 @@ struct dccp_request_sock {
__u64 dreq_iss;
__u64 dreq_isr;
__be32 dreq_service;
+ struct list_head dreq_featneg;
__u32 dreq_timestamp_echo;
__u32 dreq_timestamp_time;
};
@@ -493,10 +485,12 @@ struct dccp_ackvec;
* @dccps_r_ack_ratio - feature-remote Ack Ratio
* @dccps_pcslen - sender partial checksum coverage (via sockopt)
* @dccps_pcrlen - receiver partial checksum coverage (via sockopt)
+ * @dccps_send_ndp_count - local Send NDP Count feature (7.7.2)
* @dccps_ndp_count - number of Non Data Packets since last data packet
* @dccps_mss_cache - current value of MSS (path MTU minus header sizes)
* @dccps_rate_last - timestamp for rate-limiting DCCP-Sync (RFC 4340, 7.5.4)
* @dccps_minisock - associated minisock (accessed via dccp_msk)
+ * @dccps_featneg - tracks feature-negotiation state (mostly during handshake)
* @dccps_hc_rx_ackvec - rx half connection ack vector
* @dccps_hc_rx_ccid - CCID used for the receiver (or receiving half-connection)
* @dccps_hc_tx_ccid - CCID used for the sender (or sending half-connection)
@@ -529,11 +523,13 @@ struct dccp_sock {
__u32 dccps_timestamp_time;
__u16 dccps_l_ack_ratio;
__u16 dccps_r_ack_ratio;
- __u16 dccps_pcslen;
- __u16 dccps_pcrlen;
+ __u8 dccps_pcslen:4;
+ __u8 dccps_pcrlen:4;
+ __u8 dccps_send_ndp_count:1;
__u64 dccps_ndp_count:48;
unsigned long dccps_rate_last;
struct dccp_minisock dccps_minisock;
+ struct list_head dccps_featneg;
struct dccp_ackvec *dccps_hc_rx_ackvec;
struct ccid *dccps_hc_rx_ccid;
struct ccid *dccps_hc_tx_ccid;
diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h
index 25d62e6e329..1cb0f0b9092 100644
--- a/include/linux/etherdevice.h
+++ b/include/linux/etherdevice.h
@@ -27,6 +27,7 @@
#include <linux/if_ether.h>
#include <linux/netdevice.h>
#include <linux/random.h>
+#include <asm/unaligned.h>
#ifdef __KERNEL__
extern __be16 eth_type_trans(struct sk_buff *skb, struct net_device *dev);
@@ -41,6 +42,10 @@ extern int eth_header_cache(const struct neighbour *neigh, struct hh_cache *hh);
extern void eth_header_cache_update(struct hh_cache *hh,
const struct net_device *dev,
const unsigned char *haddr);
+extern int eth_mac_addr(struct net_device *dev, void *p);
+extern int eth_change_mtu(struct net_device *dev, int new_mtu);
+extern int eth_validate_addr(struct net_device *dev);
+
extern struct net_device *alloc_etherdev_mq(int sizeof_priv, unsigned int queue_count);
@@ -136,6 +141,47 @@ static inline unsigned compare_ether_addr(const u8 *addr1, const u8 *addr2)
BUILD_BUG_ON(ETH_ALEN != 6);
return ((a[0] ^ b[0]) | (a[1] ^ b[1]) | (a[2] ^ b[2])) != 0;
}
+
+static inline unsigned long zap_last_2bytes(unsigned long value)
+{
+#ifdef __BIG_ENDIAN
+ return value >> 16;
+#else
+ return value << 16;
+#endif
+}
+
+/**
+ * compare_ether_addr_64bits - Compare two Ethernet addresses
+ * @addr1: Pointer to an array of 8 bytes
+ * @addr2: Pointer to an other array of 8 bytes
+ *
+ * Compare two ethernet addresses, returns 0 if equal.
+ * Same result than "memcmp(addr1, addr2, ETH_ALEN)" but without conditional
+ * branches, and possibly long word memory accesses on CPU allowing cheap
+ * unaligned memory reads.
+ * arrays = { byte1, byte2, byte3, byte4, byte6, byte7, pad1, pad2}
+ *
+ * Please note that alignment of addr1 & addr2 is only guaranted to be 16 bits.
+ */
+
+static inline unsigned compare_ether_addr_64bits(const u8 addr1[6+2],
+ const u8 addr2[6+2])
+{
+#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+ unsigned long fold = ((*(unsigned long *)addr1) ^
+ (*(unsigned long *)addr2));
+
+ if (sizeof(fold) == 8)
+ return zap_last_2bytes(fold) != 0;
+
+ fold |= zap_last_2bytes((*(unsigned long *)(addr1 + 4)) ^
+ (*(unsigned long *)(addr2 + 4)));
+ return fold != 0;
+#else
+ return compare_ether_addr(addr1, addr2);
+#endif
+}
#endif /* __KERNEL__ */
#endif /* _LINUX_ETHERDEVICE_H */
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index b4b038b89ee..27c67a54223 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -467,6 +467,8 @@ struct ethtool_ops {
#define ETHTOOL_GRXFH 0x00000029 /* Get RX flow hash configuration */
#define ETHTOOL_SRXFH 0x0000002a /* Set RX flow hash configuration */
+#define ETHTOOL_GGRO 0x0000002b /* Get GRO enable (ethtool_value) */
+#define ETHTOOL_SGRO 0x0000002c /* Set GRO enable (ethtool_value) */
/* compatibility with older code */
#define SPARC_ETH_GSET ETHTOOL_GSET
diff --git a/include/linux/fddidevice.h b/include/linux/fddidevice.h
index e61e42dfd31..155bafd9e88 100644
--- a/include/linux/fddidevice.h
+++ b/include/linux/fddidevice.h
@@ -27,6 +27,7 @@
#ifdef __KERNEL__
extern __be16 fddi_type_trans(struct sk_buff *skb,
struct net_device *dev);
+extern int fddi_change_mtu(struct net_device *dev, int new_mtu);
extern struct net_device *alloc_fddidev(int sizeof_priv);
#endif
diff --git a/include/linux/filter.h b/include/linux/filter.h
index b6ea9aa9e85..1354aaf6abb 100644
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -122,7 +122,8 @@ struct sock_fprog /* Required for SO_ATTACH_FILTER. */
#define SKF_AD_PKTTYPE 4
#define SKF_AD_IFINDEX 8
#define SKF_AD_NLATTR 12
-#define SKF_AD_MAX 16
+#define SKF_AD_NLATTR_NEST 16
+#define SKF_AD_MAX 20
#define SKF_NET_OFF (-0x100000)
#define SKF_LL_OFF (-0x200000)
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index 708bab58d8d..d9051d717d2 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -47,12 +47,7 @@
struct gianfar_platform_data {
/* device specific information */
u32 device_flags;
- /* board specific information */
- u32 board_flags;
- int mdio_bus; /* Bus controlled by us */
- char bus_id[MII_BUS_ID_SIZE]; /* Bus PHY is on */
- u32 phy_id;
- u8 mac_addr[6];
+ char bus_id[BUS_ID_SIZE];
phy_interface_t interface;
};
@@ -61,17 +56,6 @@ struct gianfar_mdio_data {
int irq[32];
};
-/* Flags related to gianfar device features */
-#define FSL_GIANFAR_DEV_HAS_GIGABIT 0x00000001
-#define FSL_GIANFAR_DEV_HAS_COALESCE 0x00000002
-#define FSL_GIANFAR_DEV_HAS_RMON 0x00000004
-#define FSL_GIANFAR_DEV_HAS_MULTI_INTR 0x00000008
-#define FSL_GIANFAR_DEV_HAS_CSUM 0x00000010
-#define FSL_GIANFAR_DEV_HAS_VLAN 0x00000020
-#define FSL_GIANFAR_DEV_HAS_EXTENDED_HASH 0x00000040
-#define FSL_GIANFAR_DEV_HAS_PADDING 0x00000080
-#define FSL_GIANFAR_DEV_HAS_MAGIC_PACKET 0x00000100
-
/* Flags in gianfar_platform_data */
#define FSL_GIANFAR_BRD_HAS_PHY_INTR 0x00000001 /* set or use a timer */
#define FSL_GIANFAR_BRD_IS_REDUCED 0x00000002 /* Set if RGMII, RMII */
diff --git a/include/linux/hdlc.h b/include/linux/hdlc.h
index c59769693be..fd47a151665 100644
--- a/include/linux/hdlc.h
+++ b/include/linux/hdlc.h
@@ -43,7 +43,7 @@ struct hdlc_proto {
};
-/* Pointed to by dev->priv */
+/* Pointed to by netdev_priv(dev) */
typedef struct hdlc_device {
/* used by HDLC layer to take control over HDLC device from hw driver*/
int (*attach)(struct net_device *dev,
@@ -80,7 +80,7 @@ struct net_device *alloc_hdlcdev(void *priv);
static inline struct hdlc_device* dev_to_hdlc(struct net_device *dev)
{
- return dev->priv;
+ return netdev_priv(dev);
}
static __inline__ void debug_frame(const struct sk_buff *skb)
diff --git a/include/linux/hippidevice.h b/include/linux/hippidevice.h
index bab303dafd6..f148e490841 100644
--- a/include/linux/hippidevice.h
+++ b/include/linux/hippidevice.h
@@ -32,7 +32,9 @@ struct hippi_cb {
};
extern __be16 hippi_type_trans(struct sk_buff *skb, struct net_device *dev);
-
+extern int hippi_change_mtu(struct net_device *dev, int new_mtu);
+extern int hippi_mac_addr(struct net_device *dev, void *p);
+extern int hippi_neigh_setup_dev(struct net_device *dev, struct neigh_parms *p);
extern struct net_device *alloc_hippi_dev(int sizeof_priv);
#endif
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 14126bc3664..c4e6ca1a630 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -12,8 +12,8 @@
* published by the Free Software Foundation.
*/
-#ifndef IEEE80211_H
-#define IEEE80211_H
+#ifndef LINUX_IEEE80211_H
+#define LINUX_IEEE80211_H
#include <linux/types.h>
#include <asm/byteorder.h>
@@ -97,7 +97,10 @@
#define IEEE80211_MAX_FRAME_LEN 2352
#define IEEE80211_MAX_SSID_LEN 32
+
#define IEEE80211_MAX_MESH_ID_LEN 32
+#define IEEE80211_MESH_CONFIG_LEN 19
+
#define IEEE80211_QOS_CTL_LEN 2
#define IEEE80211_QOS_CTL_TID_MASK 0x000F
#define IEEE80211_QOS_CTL_TAG1D_MASK 0x0007
@@ -666,6 +669,13 @@ struct ieee80211_cts {
u8 ra[6];
} __attribute__ ((packed));
+struct ieee80211_pspoll {
+ __le16 frame_control;
+ __le16 aid;
+ u8 bssid[6];
+ u8 ta[6];
+} __attribute__ ((packed));
+
/**
* struct ieee80211_bar - HT Block Ack Request
*
@@ -685,28 +695,88 @@ struct ieee80211_bar {
#define IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL 0x0000
#define IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA 0x0004
+
+#define IEEE80211_HT_MCS_MASK_LEN 10
+
+/**
+ * struct ieee80211_mcs_info - MCS information
+ * @rx_mask: RX mask
+ * @rx_highest: highest supported RX rate
+ * @tx_params: TX parameters
+ */
+struct ieee80211_mcs_info {
+ u8 rx_mask[IEEE80211_HT_MCS_MASK_LEN];
+ __le16 rx_highest;
+ u8 tx_params;
+ u8 reserved[3];
+} __attribute__((packed));
+
+/* 802.11n HT capability MSC set */
+#define IEEE80211_HT_MCS_RX_HIGHEST_MASK 0x3ff
+#define IEEE80211_HT_MCS_TX_DEFINED 0x01
+#define IEEE80211_HT_MCS_TX_RX_DIFF 0x02
+/* value 0 == 1 stream etc */
+#define IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK 0x0C
+#define IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT 2
+#define IEEE80211_HT_MCS_TX_MAX_STREAMS 4
+#define IEEE80211_HT_MCS_TX_UNEQUAL_MODULATION 0x10
+
+/*
+ * 802.11n D5.0 20.3.5 / 20.6 says:
+ * - indices 0 to 7 and 32 are single spatial stream
+ * - 8 to 31 are multiple spatial streams using equal modulation
+ * [8..15 for two streams, 16..23 for three and 24..31 for four]
+ * - remainder are multiple spatial streams using unequal modulation
+ */
+#define IEEE80211_HT_MCS_UNEQUAL_MODULATION_START 33
+#define IEEE80211_HT_MCS_UNEQUAL_MODULATION_START_BYTE \
+ (IEEE80211_HT_MCS_UNEQUAL_MODULATION_START / 8)
+
/**
* struct ieee80211_ht_cap - HT capabilities
*
- * This structure refers to "HT capabilities element" as
- * described in 802.11n draft section 7.3.2.52
+ * This structure is the "HT capabilities element" as
+ * described in 802.11n D5.0 7.3.2.57
*/
struct ieee80211_ht_cap {
__le16 cap_info;
u8 ampdu_params_info;
- u8 supp_mcs_set[16];
+
+ /* 16 bytes MCS information */
+ struct ieee80211_mcs_info mcs;
+
__le16 extended_ht_cap_info;
__le32 tx_BF_cap_info;
u8 antenna_selection_info;
} __attribute__ ((packed));
+/* 802.11n HT capabilities masks (for cap_info) */
+#define IEEE80211_HT_CAP_LDPC_CODING 0x0001
+#define IEEE80211_HT_CAP_SUP_WIDTH_20_40 0x0002
+#define IEEE80211_HT_CAP_SM_PS 0x000C
+#define IEEE80211_HT_CAP_GRN_FLD 0x0010
+#define IEEE80211_HT_CAP_SGI_20 0x0020
+#define IEEE80211_HT_CAP_SGI_40 0x0040
+#define IEEE80211_HT_CAP_TX_STBC 0x0080
+#define IEEE80211_HT_CAP_RX_STBC 0x0300
+#define IEEE80211_HT_CAP_DELAY_BA 0x0400
+#define IEEE80211_HT_CAP_MAX_AMSDU 0x0800
+#define IEEE80211_HT_CAP_DSSSCCK40 0x1000
+#define IEEE80211_HT_CAP_PSMP_SUPPORT 0x2000
+#define IEEE80211_HT_CAP_40MHZ_INTOLERANT 0x4000
+#define IEEE80211_HT_CAP_LSIG_TXOP_PROT 0x8000
+
+/* 802.11n HT capability AMPDU settings (for ampdu_params_info) */
+#define IEEE80211_HT_AMPDU_PARM_FACTOR 0x03
+#define IEEE80211_HT_AMPDU_PARM_DENSITY 0x1C
+
/**
- * struct ieee80211_ht_cap - HT additional information
+ * struct ieee80211_ht_info - HT information
*
- * This structure refers to "HT information element" as
- * described in 802.11n draft section 7.3.2.53
+ * This structure is the "HT information element" as
+ * described in 802.11n D5.0 7.3.2.58
*/
-struct ieee80211_ht_addt_info {
+struct ieee80211_ht_info {
u8 control_chan;
u8 ht_param;
__le16 operation_mode;
@@ -714,36 +784,33 @@ struct ieee80211_ht_addt_info {
u8 basic_set[16];
} __attribute__ ((packed));
-/* 802.11n HT capabilities masks */
-#define IEEE80211_HT_CAP_SUP_WIDTH 0x0002
-#define IEEE80211_HT_CAP_SM_PS 0x000C
-#define IEEE80211_HT_CAP_GRN_FLD 0x0010
-#define IEEE80211_HT_CAP_SGI_20 0x0020
-#define IEEE80211_HT_CAP_SGI_40 0x0040
-#define IEEE80211_HT_CAP_DELAY_BA 0x0400
-#define IEEE80211_HT_CAP_MAX_AMSDU 0x0800
-#define IEEE80211_HT_CAP_DSSSCCK40 0x1000
-/* 802.11n HT capability AMPDU settings */
-#define IEEE80211_HT_CAP_AMPDU_FACTOR 0x03
-#define IEEE80211_HT_CAP_AMPDU_DENSITY 0x1C
-/* 802.11n HT capability MSC set */
-#define IEEE80211_SUPP_MCS_SET_UEQM 4
-#define IEEE80211_HT_CAP_MAX_STREAMS 4
-#define IEEE80211_SUPP_MCS_SET_LEN 10
-/* maximum streams the spec allows */
-#define IEEE80211_HT_CAP_MCS_TX_DEFINED 0x01
-#define IEEE80211_HT_CAP_MCS_TX_RX_DIFF 0x02
-#define IEEE80211_HT_CAP_MCS_TX_STREAMS 0x0C
-#define IEEE80211_HT_CAP_MCS_TX_UEQM 0x10
-/* 802.11n HT IE masks */
-#define IEEE80211_HT_IE_CHA_SEC_OFFSET 0x03
-#define IEEE80211_HT_IE_CHA_SEC_NONE 0x00
-#define IEEE80211_HT_IE_CHA_SEC_ABOVE 0x01
-#define IEEE80211_HT_IE_CHA_SEC_BELOW 0x03
-#define IEEE80211_HT_IE_CHA_WIDTH 0x04
-#define IEEE80211_HT_IE_HT_PROTECTION 0x0003
-#define IEEE80211_HT_IE_NON_GF_STA_PRSNT 0x0004
-#define IEEE80211_HT_IE_NON_HT_STA_PRSNT 0x0010
+/* for ht_param */
+#define IEEE80211_HT_PARAM_CHA_SEC_OFFSET 0x03
+#define IEEE80211_HT_PARAM_CHA_SEC_NONE 0x00
+#define IEEE80211_HT_PARAM_CHA_SEC_ABOVE 0x01
+#define IEEE80211_HT_PARAM_CHA_SEC_BELOW 0x03
+#define IEEE80211_HT_PARAM_CHAN_WIDTH_ANY 0x04
+#define IEEE80211_HT_PARAM_RIFS_MODE 0x08
+#define IEEE80211_HT_PARAM_SPSMP_SUPPORT 0x10
+#define IEEE80211_HT_PARAM_SERV_INTERVAL_GRAN 0xE0
+
+/* for operation_mode */
+#define IEEE80211_HT_OP_MODE_PROTECTION 0x0003
+#define IEEE80211_HT_OP_MODE_PROTECTION_NONE 0
+#define IEEE80211_HT_OP_MODE_PROTECTION_NONMEMBER 1
+#define IEEE80211_HT_OP_MODE_PROTECTION_20MHZ 2
+#define IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED 3
+#define IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT 0x0004
+#define IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT 0x0010
+
+/* for stbc_param */
+#define IEEE80211_HT_STBC_PARAM_DUAL_BEACON 0x0040
+#define IEEE80211_HT_STBC_PARAM_DUAL_CTS_PROT 0x0080
+#define IEEE80211_HT_STBC_PARAM_STBC_BEACON 0x0100
+#define IEEE80211_HT_STBC_PARAM_LSIG_TXOP_FULLPROT 0x0200
+#define IEEE80211_HT_STBC_PARAM_PCO_ACTIVE 0x0400
+#define IEEE80211_HT_STBC_PARAM_PCO_PHASE 0x0800
+
/* block-ack parameters */
#define IEEE80211_ADDBA_PARAM_POLICY_MASK 0x0002
@@ -769,7 +836,6 @@ struct ieee80211_ht_addt_info {
/* Authentication algorithms */
#define WLAN_AUTH_OPEN 0
#define WLAN_AUTH_SHARED_KEY 1
-#define WLAN_AUTH_FAST_BSS_TRANSITION 2
#define WLAN_AUTH_LEAP 128
#define WLAN_AUTH_CHALLENGE_LEN 128
@@ -949,7 +1015,7 @@ enum ieee80211_eid {
WLAN_EID_EXT_SUPP_RATES = 50,
/* 802.11n */
WLAN_EID_HT_CAPABILITY = 45,
- WLAN_EID_HT_EXTRA_INFO = 61,
+ WLAN_EID_HT_INFORMATION = 61,
/* 802.11i */
WLAN_EID_RSN = 48,
WLAN_EID_WPA = 221,
@@ -976,6 +1042,68 @@ enum ieee80211_spectrum_mgmt_actioncode {
WLAN_ACTION_SPCT_CHL_SWITCH = 4,
};
+/*
+ * IEEE 802.11-2007 7.3.2.9 Country information element
+ *
+ * Minimum length is 8 octets, ie len must be evenly
+ * divisible by 2
+ */
+
+/* Although the spec says 8 I'm seeing 6 in practice */
+#define IEEE80211_COUNTRY_IE_MIN_LEN 6
+
+/*
+ * For regulatory extension stuff see IEEE 802.11-2007
+ * Annex I (page 1141) and Annex J (page 1147). Also
+ * review 7.3.2.9.
+ *
+ * When dot11RegulatoryClassesRequired is true and the
+ * first_channel/reg_extension_id is >= 201 then the IE
+ * compromises of the 'ext' struct represented below:
+ *
+ * - Regulatory extension ID - when generating IE this just needs
+ * to be monotonically increasing for each triplet passed in
+ * the IE
+ * - Regulatory class - index into set of rules
+ * - Coverage class - index into air propagation time (Table 7-27),
+ * in microseconds, you can compute the air propagation time from
+ * the index by multiplying by 3, so index 10 yields a propagation
+ * of 10 us. Valid values are 0-31, values 32-255 are not defined
+ * yet. A value of 0 inicates air propagation of <= 1 us.
+ *
+ * See also Table I.2 for Emission limit sets and table
+ * I.3 for Behavior limit sets. Table J.1 indicates how to map
+ * a reg_class to an emission limit set and behavior limit set.
+ */
+#define IEEE80211_COUNTRY_EXTENSION_ID 201
+
+/*
+ * Channels numbers in the IE must be monotonically increasing
+ * if dot11RegulatoryClassesRequired is not true.
+ *
+ * If dot11RegulatoryClassesRequired is true consecutive
+ * subband triplets following a regulatory triplet shall
+ * have monotonically increasing first_channel number fields.
+ *
+ * Channel numbers shall not overlap.
+ *
+ * Note that max_power is signed.
+ */
+struct ieee80211_country_ie_triplet {
+ union {
+ struct {
+ u8 first_channel;
+ u8 num_channels;
+ s8 max_power;
+ } __attribute__ ((packed)) chans;
+ struct {
+ u8 reg_extension_id;
+ u8 reg_class;
+ u8 coverage_class;
+ } __attribute__ ((packed)) ext;
+ };
+} __attribute__ ((packed));
+
/* BACK action code */
enum ieee80211_back_actioncode {
WLAN_ACTION_ADDBA_REQ = 0,
@@ -1057,4 +1185,4 @@ static inline u8 *ieee80211_get_DA(struct ieee80211_hdr *hdr)
return hdr->addr1;
}
-#endif /* IEEE80211_H */
+#endif /* LINUX_IEEE80211_H */
diff --git a/include/linux/if.h b/include/linux/if.h
index 65246846c84..2a6e29620a9 100644
--- a/include/linux/if.h
+++ b/include/linux/if.h
@@ -65,6 +65,7 @@
#define IFF_BONDING 0x20 /* bonding master or slave */
#define IFF_SLAVE_NEEDARP 0x40 /* need ARPs for validation */
#define IFF_ISATAP 0x80 /* ISATAP interface (RFC4214) */
+#define IFF_MASTER_ARPMON 0x100 /* bonding master, ARP mon in use */
#define IF_GET_IFACE 0x0001 /* for querying only */
#define IF_GET_PROTO 0x0002
diff --git a/include/linux/if_arp.h b/include/linux/if_arp.h
index 4d3401812e6..5ff89809a58 100644
--- a/include/linux/if_arp.h
+++ b/include/linux/if_arp.h
@@ -87,6 +87,9 @@
#define ARPHRD_IEEE80211_PRISM 802 /* IEEE 802.11 + Prism2 header */
#define ARPHRD_IEEE80211_RADIOTAP 803 /* IEEE 802.11 + radiotap header */
+#define ARPHRD_PHONET 820 /* PhoNet media type */
+#define ARPHRD_PHONET_PIPE 821 /* PhoNet pipe header */
+
#define ARPHRD_VOID 0xFFFF /* Void type, nothing is known */
#define ARPHRD_NONE 0xFFFE /* zero header length */
diff --git a/include/linux/in.h b/include/linux/in.h
index db458beef19..d60122a3a08 100644
--- a/include/linux/in.h
+++ b/include/linux/in.h
@@ -80,6 +80,10 @@ struct in_addr {
/* BSD compatibility */
#define IP_RECVRETOPTS IP_RETOPTS
+/* TProxy original addresses */
+#define IP_ORIGDSTADDR 20
+#define IP_RECVORIGDSTADDR IP_ORIGDSTADDR
+
/* IP_MTU_DISCOVER values */
#define IP_PMTUDISC_DONT 0 /* Never send DF frames */
#define IP_PMTUDISC_WANT 1 /* Use per route hints */
diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h
index 641e026eee8..0b816cae533 100644
--- a/include/linux/ipv6.h
+++ b/include/linux/ipv6.h
@@ -278,6 +278,7 @@ struct ipv6_pinfo {
struct in6_addr saddr;
struct in6_addr rcv_saddr;
struct in6_addr daddr;
+ struct in6_pktinfo sticky_pktinfo;
struct in6_addr *daddr_cache;
#ifdef CONFIG_IPV6_SUBTREES
struct in6_addr *saddr_cache;
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index dc7e0d0a647..6002ae76785 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -361,18 +361,6 @@ static inline char *pack_hex_byte(char *buf, u8 byte)
((unsigned char *)&addr)[3]
#define NIPQUAD_FMT "%u.%u.%u.%u"
-#define NIP6(addr) \
- ntohs((addr).s6_addr16[0]), \
- ntohs((addr).s6_addr16[1]), \
- ntohs((addr).s6_addr16[2]), \
- ntohs((addr).s6_addr16[3]), \
- ntohs((addr).s6_addr16[4]), \
- ntohs((addr).s6_addr16[5]), \
- ntohs((addr).s6_addr16[6]), \
- ntohs((addr).s6_addr16[7])
-#define NIP6_FMT "%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x"
-#define NIP6_SEQFMT "%04x%04x%04x%04x%04x%04x%04x%04x"
-
#if defined(__LITTLE_ENDIAN)
#define HIPQUAD(addr) \
((unsigned char *)&addr)[3], \
diff --git a/include/linux/list_nulls.h b/include/linux/list_nulls.h
new file mode 100644
index 00000000000..93150ecf3ea
--- /dev/null
+++ b/include/linux/list_nulls.h
@@ -0,0 +1,94 @@
+#ifndef _LINUX_LIST_NULLS_H
+#define _LINUX_LIST_NULLS_H
+
+/*
+ * Special version of lists, where end of list is not a NULL pointer,
+ * but a 'nulls' marker, which can have many different values.
+ * (up to 2^31 different values guaranteed on all platforms)
+ *
+ * In the standard hlist, termination of a list is the NULL pointer.
+ * In this special 'nulls' variant, we use the fact that objects stored in
+ * a list are aligned on a word (4 or 8 bytes alignment).
+ * We therefore use the last significant bit of 'ptr' :
+ * Set to 1 : This is a 'nulls' end-of-list marker (ptr >> 1)
+ * Set to 0 : This is a pointer to some object (ptr)
+ */
+
+struct hlist_nulls_head {
+ struct hlist_nulls_node *first;
+};
+
+struct hlist_nulls_node {
+ struct hlist_nulls_node *next, **pprev;
+};
+#define INIT_HLIST_NULLS_HEAD(ptr, nulls) \
+ ((ptr)->first = (struct hlist_nulls_node *) (1UL | (((long)nulls) << 1)))
+
+#define hlist_nulls_entry(ptr, type, member) container_of(ptr,type,member)
+/**
+ * ptr_is_a_nulls - Test if a ptr is a nulls
+ * @ptr: ptr to be tested
+ *
+ */
+static inline int is_a_nulls(const struct hlist_nulls_node *ptr)
+{
+ return ((unsigned long)ptr & 1);
+}
+
+/**
+ * get_nulls_value - Get the 'nulls' value of the end of chain
+ * @ptr: end of chain
+ *
+ * Should be called only if is_a_nulls(ptr);
+ */
+static inline unsigned long get_nulls_value(const struct hlist_nulls_node *ptr)
+{
+ return ((unsigned long)ptr) >> 1;
+}
+
+static inline int hlist_nulls_unhashed(const struct hlist_nulls_node *h)
+{
+ return !h->pprev;
+}
+
+static inline int hlist_nulls_empty(const struct hlist_nulls_head *h)
+{
+ return is_a_nulls(h->first);
+}
+
+static inline void __hlist_nulls_del(struct hlist_nulls_node *n)
+{
+ struct hlist_nulls_node *next = n->next;
+ struct hlist_nulls_node **pprev = n->pprev;
+ *pprev = next;
+ if (!is_a_nulls(next))
+ next->pprev = pprev;
+}
+
+/**
+ * hlist_nulls_for_each_entry - iterate over list of given type
+ * @tpos: the type * to use as a loop cursor.
+ * @pos: the &struct hlist_node to use as a loop cursor.
+ * @head: the head for your list.
+ * @member: the name of the hlist_node within the struct.
+ *
+ */
+#define hlist_nulls_for_each_entry(tpos, pos, head, member) \
+ for (pos = (head)->first; \
+ (!is_a_nulls(pos)) && \
+ ({ tpos = hlist_nulls_entry(pos, typeof(*tpos), member); 1;}); \
+ pos = pos->next)
+
+/**
+ * hlist_nulls_for_each_entry_from - iterate over a hlist continuing from current point
+ * @tpos: the type * to use as a loop cursor.
+ * @pos: the &struct hlist_node to use as a loop cursor.
+ * @member: the name of the hlist_node within the struct.
+ *
+ */
+#define hlist_nulls_for_each_entry_from(tpos, pos, member) \
+ for (; (!is_a_nulls(pos)) && \
+ ({ tpos = hlist_nulls_entry(pos, typeof(*tpos), member); 1;}); \
+ pos = pos->next)
+
+#endif
diff --git a/include/linux/mdio-gpio.h b/include/linux/mdio-gpio.h
new file mode 100644
index 00000000000..e9d3fdfe41d
--- /dev/null
+++ b/include/linux/mdio-gpio.h
@@ -0,0 +1,25 @@
+/*
+ * MDIO-GPIO bus platform data structures
+ *
+ * Copyright (C) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __LINUX_MDIO_GPIO_H
+#define __LINUX_MDIO_GPIO_H
+
+#include <linux/mdio-bitbang.h>
+
+struct mdio_gpio_platform_data {
+ /* GPIO numbers for bus pins */
+ unsigned int mdc;
+ unsigned int mdio;
+
+ unsigned int phy_mask;
+ int irqs[PHY_MAX_ADDR];
+};
+
+#endif /* __LINUX_MDIO_GPIO_H */
diff --git a/include/linux/mii.h b/include/linux/mii.h
index 151b7e0182c..ad748588faf 100644
--- a/include/linux/mii.h
+++ b/include/linux/mii.h
@@ -135,6 +135,10 @@
#define LPA_1000FULL 0x0800 /* Link partner 1000BASE-T full duplex */
#define LPA_1000HALF 0x0400 /* Link partner 1000BASE-T half duplex */
+/* Flow control flags */
+#define FLOW_CTRL_TX 0x01
+#define FLOW_CTRL_RX 0x02
+
/* This structure is used in all SIOCxMIIxxx ioctl calls */
struct mii_ioctl_data {
__u16 phy_id;
@@ -235,5 +239,34 @@ static inline unsigned int mii_duplex (unsigned int duplex_lock,
return 0;
}
+/**
+ * mii_resolve_flowctrl_fdx
+ * @lcladv: value of MII ADVERTISE register
+ * @rmtadv: value of MII LPA register
+ *
+ * Resolve full duplex flow control as per IEEE 802.3-2005 table 28B-3
+ */
+static inline u8 mii_resolve_flowctrl_fdx(u16 lcladv, u16 rmtadv)
+{
+ u8 cap = 0;
+
+ if (lcladv & ADVERTISE_PAUSE_CAP) {
+ if (lcladv & ADVERTISE_PAUSE_ASYM) {
+ if (rmtadv & LPA_PAUSE_CAP)
+ cap = FLOW_CTRL_TX | FLOW_CTRL_RX;
+ else if (rmtadv & LPA_PAUSE_ASYM)
+ cap = FLOW_CTRL_RX;
+ } else {
+ if (rmtadv & LPA_PAUSE_CAP)
+ cap = FLOW_CTRL_TX | FLOW_CTRL_RX;
+ }
+ } else if (lcladv & ADVERTISE_PAUSE_ASYM) {
+ if ((rmtadv & LPA_PAUSE_CAP) && (rmtadv & LPA_PAUSE_ASYM))
+ cap = FLOW_CTRL_TX;
+ }
+
+ return cap;
+}
+
#endif /* __KERNEL__ */
#endif /* __LINUX_MII_H__ */
diff --git a/include/linux/mroute6.h b/include/linux/mroute6.h
index 6f4c180179e..5375faca1f7 100644
--- a/include/linux/mroute6.h
+++ b/include/linux/mroute6.h
@@ -117,6 +117,7 @@ struct sioc_mif_req6
#include <linux/pim.h>
#include <linux/skbuff.h> /* for struct sk_buff_head */
+#include <net/net_namespace.h>
#ifdef CONFIG_IPV6_MROUTE
static inline int ip6_mroute_opt(int opt)
@@ -187,6 +188,9 @@ struct mif_device
struct mfc6_cache
{
struct mfc6_cache *next; /* Next entry on cache line */
+#ifdef CONFIG_NET_NS
+ struct net *mfc6_net;
+#endif
struct in6_addr mf6c_mcastgrp; /* Group the entry belongs to */
struct in6_addr mf6c_origin; /* Source of packet */
mifi_t mf6c_parent; /* Source interface */
@@ -209,6 +213,18 @@ struct mfc6_cache
} mfc_un;
};
+static inline
+struct net *mfc6_net(const struct mfc6_cache *mfc)
+{
+ return read_pnet(&mfc->mfc6_net);
+}
+
+static inline
+void mfc6_net_set(struct mfc6_cache *mfc, struct net *net)
+{
+ write_pnet(&mfc->mfc6_net, hold_net(net));
+}
+
#define MFC_STATIC 1
#define MFC_NOTIFY 2
@@ -229,13 +245,17 @@ struct mfc6_cache
#ifdef __KERNEL__
struct rtmsg;
-extern int ip6mr_get_route(struct sk_buff *skb, struct rtmsg *rtm, int nowait);
+extern int ip6mr_get_route(struct net *net, struct sk_buff *skb,
+ struct rtmsg *rtm, int nowait);
#ifdef CONFIG_IPV6_MROUTE
-extern struct sock *mroute6_socket;
+static inline struct sock *mroute6_socket(struct net *net)
+{
+ return net->ipv6.mroute6_sk;
+}
extern int ip6mr_sk_done(struct sock *sk);
#else
-#define mroute6_socket NULL
+static inline struct sock *mroute6_socket(struct net *net) { return NULL; }
static inline int ip6mr_sk_done(struct sock *sk) { return 0; }
#endif
#endif
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index e26f5495289..41e1224651c 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -43,6 +43,9 @@
#include <net/net_namespace.h>
#include <net/dsa.h>
+#ifdef CONFIG_DCB
+#include <net/dcbnl.h>
+#endif
struct vlan_group;
struct ethtool_ops;
@@ -311,8 +314,9 @@ struct napi_struct {
spinlock_t poll_lock;
int poll_owner;
struct net_device *dev;
- struct list_head dev_list;
#endif
+ struct list_head dev_list;
+ struct sk_buff *gro_list;
};
enum
@@ -373,22 +377,8 @@ static inline int napi_reschedule(struct napi_struct *napi)
*
* Mark NAPI processing as complete.
*/
-static inline void __napi_complete(struct napi_struct *n)
-{
- BUG_ON(!test_bit(NAPI_STATE_SCHED, &n->state));
- list_del(&n->poll_list);
- smp_mb__before_clear_bit();
- clear_bit(NAPI_STATE_SCHED, &n->state);
-}
-
-static inline void napi_complete(struct napi_struct *n)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- __napi_complete(n);
- local_irq_restore(flags);
-}
+extern void __napi_complete(struct napi_struct *n);
+extern void napi_complete(struct napi_struct *n);
/**
* napi_disable - prevent NAPI from scheduling
@@ -452,6 +442,147 @@ struct netdev_queue {
struct Qdisc *qdisc_sleeping;
} ____cacheline_aligned_in_smp;
+
+/*
+ * This structure defines the management hooks for network devices.
+ * The following hooks can be defined; unless noted otherwise, they are
+ * optional and can be filled with a null pointer.
+ *
+ * int (*ndo_init)(struct net_device *dev);
+ * This function is called once when network device is registered.
+ * The network device can use this to any late stage initializaton
+ * or semantic validattion. It can fail with an error code which will
+ * be propogated back to register_netdev
+ *
+ * void (*ndo_uninit)(struct net_device *dev);
+ * This function is called when device is unregistered or when registration
+ * fails. It is not called if init fails.
+ *
+ * int (*ndo_open)(struct net_device *dev);
+ * This function is called when network device transistions to the up
+ * state.
+ *
+ * int (*ndo_stop)(struct net_device *dev);
+ * This function is called when network device transistions to the down
+ * state.
+ *
+ * int (*ndo_hard_start_xmit)(struct sk_buff *skb, struct net_device *dev);
+ * Called when a packet needs to be transmitted.
+ * Must return NETDEV_TX_OK , NETDEV_TX_BUSY, or NETDEV_TX_LOCKED,
+ * Required can not be NULL.
+ *
+ * u16 (*ndo_select_queue)(struct net_device *dev, struct sk_buff *skb);
+ * Called to decide which queue to when device supports multiple
+ * transmit queues.
+ *
+ * void (*ndo_change_rx_flags)(struct net_device *dev, int flags);
+ * This function is called to allow device receiver to make
+ * changes to configuration when multicast or promiscious is enabled.
+ *
+ * void (*ndo_set_rx_mode)(struct net_device *dev);
+ * This function is called device changes address list filtering.
+ *
+ * void (*ndo_set_multicast_list)(struct net_device *dev);
+ * This function is called when the multicast address list changes.
+ *
+ * int (*ndo_set_mac_address)(struct net_device *dev, void *addr);
+ * This function is called when the Media Access Control address
+ * needs to be changed. If not this interface is not defined, the
+ * mac address can not be changed.
+ *
+ * int (*ndo_validate_addr)(struct net_device *dev);
+ * Test if Media Access Control address is valid for the device.
+ *
+ * int (*ndo_do_ioctl)(struct net_device *dev, struct ifreq *ifr, int cmd);
+ * Called when a user request an ioctl which can't be handled by
+ * the generic interface code. If not defined ioctl's return
+ * not supported error code.
+ *
+ * int (*ndo_set_config)(struct net_device *dev, struct ifmap *map);
+ * Used to set network devices bus interface parameters. This interface
+ * is retained for legacy reason, new devices should use the bus
+ * interface (PCI) for low level management.
+ *
+ * int (*ndo_change_mtu)(struct net_device *dev, int new_mtu);
+ * Called when a user wants to change the Maximum Transfer Unit
+ * of a device. If not defined, any request to change MTU will
+ * will return an error.
+ *
+ * void (*ndo_tx_timeout)(struct net_device *dev);
+ * Callback uses when the transmitter has not made any progress
+ * for dev->watchdog ticks.
+ *
+ * struct net_device_stats* (*get_stats)(struct net_device *dev);
+ * Called when a user wants to get the network device usage
+ * statistics. If not defined, the counters in dev->stats will
+ * be used.
+ *
+ * void (*ndo_vlan_rx_register)(struct net_device *dev, struct vlan_group *grp);
+ * If device support VLAN receive accleration
+ * (ie. dev->features & NETIF_F_HW_VLAN_RX), then this function is called
+ * when vlan groups for the device changes. Note: grp is NULL
+ * if no vlan's groups are being used.
+ *
+ * void (*ndo_vlan_rx_add_vid)(struct net_device *dev, unsigned short vid);
+ * If device support VLAN filtering (dev->features & NETIF_F_HW_VLAN_FILTER)
+ * this function is called when a VLAN id is registered.
+ *
+ * void (*ndo_vlan_rx_kill_vid)(struct net_device *dev, unsigned short vid);
+ * If device support VLAN filtering (dev->features & NETIF_F_HW_VLAN_FILTER)
+ * this function is called when a VLAN id is unregistered.
+ *
+ * void (*ndo_poll_controller)(struct net_device *dev);
+ */
+#define HAVE_NET_DEVICE_OPS
+struct net_device_ops {
+ int (*ndo_init)(struct net_device *dev);
+ void (*ndo_uninit)(struct net_device *dev);
+ int (*ndo_open)(struct net_device *dev);
+ int (*ndo_stop)(struct net_device *dev);
+ int (*ndo_start_xmit) (struct sk_buff *skb,
+ struct net_device *dev);
+ u16 (*ndo_select_queue)(struct net_device *dev,
+ struct sk_buff *skb);
+#define HAVE_CHANGE_RX_FLAGS
+ void (*ndo_change_rx_flags)(struct net_device *dev,
+ int flags);
+#define HAVE_SET_RX_MODE
+ void (*ndo_set_rx_mode)(struct net_device *dev);
+#define HAVE_MULTICAST
+ void (*ndo_set_multicast_list)(struct net_device *dev);
+#define HAVE_SET_MAC_ADDR
+ int (*ndo_set_mac_address)(struct net_device *dev,
+ void *addr);
+#define HAVE_VALIDATE_ADDR
+ int (*ndo_validate_addr)(struct net_device *dev);
+#define HAVE_PRIVATE_IOCTL
+ int (*ndo_do_ioctl)(struct net_device *dev,
+ struct ifreq *ifr, int cmd);
+#define HAVE_SET_CONFIG
+ int (*ndo_set_config)(struct net_device *dev,
+ struct ifmap *map);
+#define HAVE_CHANGE_MTU
+ int (*ndo_change_mtu)(struct net_device *dev,
+ int new_mtu);
+ int (*ndo_neigh_setup)(struct net_device *dev,
+ struct neigh_parms *);
+#define HAVE_TX_TIMEOUT
+ void (*ndo_tx_timeout) (struct net_device *dev);
+
+ struct net_device_stats* (*ndo_get_stats)(struct net_device *dev);
+
+ void (*ndo_vlan_rx_register)(struct net_device *dev,
+ struct vlan_group *grp);
+ void (*ndo_vlan_rx_add_vid)(struct net_device *dev,
+ unsigned short vid);
+ void (*ndo_vlan_rx_kill_vid)(struct net_device *dev,
+ unsigned short vid);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+#define HAVE_NETDEV_POLL
+ void (*ndo_poll_controller)(struct net_device *dev);
+#endif
+};
+
/*
* The DEVICE structure.
* Actually, this whole structure is a big mistake. It mixes I/O
@@ -496,14 +627,7 @@ struct net_device
unsigned long state;
struct list_head dev_list;
-#ifdef CONFIG_NETPOLL
struct list_head napi_list;
-#endif
-
- /* The device initialization function. Called only once. */
- int (*init)(struct net_device *dev);
-
- /* ------- Fields preinitialized in Space.c finish here ------- */
/* Net device features */
unsigned long features;
@@ -522,6 +646,7 @@ struct net_device
#define NETIF_F_LLTX 4096 /* LockLess TX - deprecated. Please */
/* do not use LLTX in new drivers */
#define NETIF_F_NETNS_LOCAL 8192 /* Does not change network namespaces */
+#define NETIF_F_GRO 16384 /* Generic receive offload */
#define NETIF_F_LRO 32768 /* large receive offload */
/* Segmentation offload features */
@@ -547,15 +672,13 @@ struct net_device
* for all in netdev_increment_features.
*/
#define NETIF_F_ONE_FOR_ALL (NETIF_F_GSO_SOFTWARE | NETIF_F_GSO_ROBUST | \
- NETIF_F_SG | NETIF_F_HIGHDMA | \
+ NETIF_F_SG | NETIF_F_HIGHDMA | \
NETIF_F_FRAGLIST)
/* Interface index. Unique device identifier */
int ifindex;
int iflink;
-
- struct net_device_stats* (*get_stats)(struct net_device *dev);
struct net_device_stats stats;
#ifdef CONFIG_WIRELESS_EXT
@@ -565,18 +688,13 @@ struct net_device
/* Instance data managed by the core of Wireless Extensions. */
struct iw_public_data * wireless_data;
#endif
+ /* Management operations */
+ const struct net_device_ops *netdev_ops;
const struct ethtool_ops *ethtool_ops;
/* Hardware header description */
const struct header_ops *header_ops;
- /*
- * This marks the end of the "visible" part of the structure. All
- * fields hereafter are internal to the system, and may change at
- * will (read: may be cleaned up at will).
- */
-
-
unsigned int flags; /* interface flags (a la BSD) */
unsigned short gflags;
unsigned short priv_flags; /* Like 'flags' but invisible to userspace. */
@@ -635,7 +753,7 @@ struct net_device
unsigned long last_rx; /* Time of last Rx */
/* Interface address info used in eth_type_trans() */
unsigned char dev_addr[MAX_ADDR_LEN]; /* hw address, (before bcast
- because most packets are unicast) */
+ because most packets are unicast) */
unsigned char broadcast[MAX_ADDR_LEN]; /* hw bcast add */
@@ -654,18 +772,12 @@ struct net_device
/*
* One part is mostly used on xmit path (device)
*/
- void *priv; /* pointer to private data */
- int (*hard_start_xmit) (struct sk_buff *skb,
- struct net_device *dev);
/* These may be needed for future network-power-down code. */
unsigned long trans_start; /* Time (in jiffies) of last Tx */
int watchdog_timeo; /* used by dev_watchdog() */
struct timer_list watchdog_timer;
-/*
- * refcnt is a very hot point, so align it on SMP
- */
/* Number of references to this device */
atomic_t refcnt ____cacheline_aligned_in_smp;
@@ -684,56 +796,12 @@ struct net_device
NETREG_RELEASED, /* called free_netdev */
} reg_state;
- /* Called after device is detached from network. */
- void (*uninit)(struct net_device *dev);
- /* Called after last user reference disappears. */
- void (*destructor)(struct net_device *dev);
-
- /* Pointers to interface service routines. */
- int (*open)(struct net_device *dev);
- int (*stop)(struct net_device *dev);
-#define HAVE_NETDEV_POLL
-#define HAVE_CHANGE_RX_FLAGS
- void (*change_rx_flags)(struct net_device *dev,
- int flags);
-#define HAVE_SET_RX_MODE
- void (*set_rx_mode)(struct net_device *dev);
-#define HAVE_MULTICAST
- void (*set_multicast_list)(struct net_device *dev);
-#define HAVE_SET_MAC_ADDR
- int (*set_mac_address)(struct net_device *dev,
- void *addr);
-#define HAVE_VALIDATE_ADDR
- int (*validate_addr)(struct net_device *dev);
-#define HAVE_PRIVATE_IOCTL
- int (*do_ioctl)(struct net_device *dev,
- struct ifreq *ifr, int cmd);
-#define HAVE_SET_CONFIG
- int (*set_config)(struct net_device *dev,
- struct ifmap *map);
-#define HAVE_CHANGE_MTU
- int (*change_mtu)(struct net_device *dev, int new_mtu);
-
-#define HAVE_TX_TIMEOUT
- void (*tx_timeout) (struct net_device *dev);
-
- void (*vlan_rx_register)(struct net_device *dev,
- struct vlan_group *grp);
- void (*vlan_rx_add_vid)(struct net_device *dev,
- unsigned short vid);
- void (*vlan_rx_kill_vid)(struct net_device *dev,
- unsigned short vid);
+ /* Called from unregister, can be used to call free_netdev */
+ void (*destructor)(struct net_device *dev);
- int (*neigh_setup)(struct net_device *dev, struct neigh_parms *);
#ifdef CONFIG_NETPOLL
struct netpoll_info *npinfo;
#endif
-#ifdef CONFIG_NET_POLL_CONTROLLER
- void (*poll_controller)(struct net_device *dev);
-#endif
-
- u16 (*select_queue)(struct net_device *dev,
- struct sk_buff *skb);
#ifdef CONFIG_NET_NS
/* Network namespace this network device is inside */
@@ -764,6 +832,49 @@ struct net_device
/* for setting kernel sock attribute on TCP connection setup */
#define GSO_MAX_SIZE 65536
unsigned int gso_max_size;
+
+#ifdef CONFIG_DCB
+ /* Data Center Bridging netlink ops */
+ struct dcbnl_rtnl_ops *dcbnl_ops;
+#endif
+
+#ifdef CONFIG_COMPAT_NET_DEV_OPS
+ struct {
+ int (*init)(struct net_device *dev);
+ void (*uninit)(struct net_device *dev);
+ int (*open)(struct net_device *dev);
+ int (*stop)(struct net_device *dev);
+ int (*hard_start_xmit) (struct sk_buff *skb,
+ struct net_device *dev);
+ u16 (*select_queue)(struct net_device *dev,
+ struct sk_buff *skb);
+ void (*change_rx_flags)(struct net_device *dev,
+ int flags);
+ void (*set_rx_mode)(struct net_device *dev);
+ void (*set_multicast_list)(struct net_device *dev);
+ int (*set_mac_address)(struct net_device *dev,
+ void *addr);
+ int (*validate_addr)(struct net_device *dev);
+ int (*do_ioctl)(struct net_device *dev,
+ struct ifreq *ifr, int cmd);
+ int (*set_config)(struct net_device *dev,
+ struct ifmap *map);
+ int (*change_mtu)(struct net_device *dev, int new_mtu);
+ int (*neigh_setup)(struct net_device *dev,
+ struct neigh_parms *);
+ void (*tx_timeout) (struct net_device *dev);
+ struct net_device_stats* (*get_stats)(struct net_device *dev);
+ void (*vlan_rx_register)(struct net_device *dev,
+ struct vlan_group *grp);
+ void (*vlan_rx_add_vid)(struct net_device *dev,
+ unsigned short vid);
+ void (*vlan_rx_kill_vid)(struct net_device *dev,
+ unsigned short vid);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ void (*poll_controller)(struct net_device *dev);
+#endif
+ };
+#endif
};
#define to_net_dev(d) container_of(d, struct net_device, dev)
@@ -859,22 +970,8 @@ static inline void *netdev_priv(const struct net_device *dev)
* netif_napi_add() must be used to initialize a napi context prior to calling
* *any* of the other napi related functions.
*/
-static inline void netif_napi_add(struct net_device *dev,
- struct napi_struct *napi,
- int (*poll)(struct napi_struct *, int),
- int weight)
-{
- INIT_LIST_HEAD(&napi->poll_list);
- napi->poll = poll;
- napi->weight = weight;
-#ifdef CONFIG_NETPOLL
- napi->dev = dev;
- list_add(&napi->dev_list, &dev->napi_list);
- spin_lock_init(&napi->poll_lock);
- napi->poll_owner = -1;
-#endif
- set_bit(NAPI_STATE_SCHED, &napi->state);
-}
+void netif_napi_add(struct net_device *dev, struct napi_struct *napi,
+ int (*poll)(struct napi_struct *, int), int weight);
/**
* netif_napi_del - remove a napi context
@@ -882,12 +979,20 @@ static inline void netif_napi_add(struct net_device *dev,
*
* netif_napi_del() removes a napi context from the network device napi list
*/
-static inline void netif_napi_del(struct napi_struct *napi)
-{
-#ifdef CONFIG_NETPOLL
- list_del(&napi->dev_list);
-#endif
-}
+void netif_napi_del(struct napi_struct *napi);
+
+struct napi_gro_cb {
+ /* This is non-zero if the packet may be of the same flow. */
+ int same_flow;
+
+ /* This is non-zero if the packet cannot be merged with the new skb. */
+ int flush;
+
+ /* Number of segments aggregated. */
+ int count;
+};
+
+#define NAPI_GRO_CB(skb) ((struct napi_gro_cb *)(skb)->cb)
struct packet_type {
__be16 type; /* This is really htons(ether_type). */
@@ -899,6 +1004,9 @@ struct packet_type {
struct sk_buff *(*gso_segment)(struct sk_buff *skb,
int features);
int (*gso_send_check)(struct sk_buff *skb);
+ struct sk_buff **(*gro_receive)(struct sk_buff **head,
+ struct sk_buff *skb);
+ int (*gro_complete)(struct sk_buff *skb);
void *af_packet_priv;
struct list_head list;
};
@@ -1252,6 +1360,9 @@ extern int netif_rx(struct sk_buff *skb);
extern int netif_rx_ni(struct sk_buff *skb);
#define HAVE_NETIF_RECEIVE_SKB 1
extern int netif_receive_skb(struct sk_buff *skb);
+extern void napi_gro_flush(struct napi_struct *napi);
+extern int napi_gro_receive(struct napi_struct *napi,
+ struct sk_buff *skb);
extern void netif_nit_deliver(struct sk_buff *skb);
extern int dev_valid_name(const char *name);
extern int dev_ioctl(struct net *net, unsigned int cmd, void __user *);
@@ -1444,8 +1555,7 @@ static inline u32 netif_msg_init(int debug_value, int default_msg_enable_bits)
}
/* Test if receive needs to be scheduled but only if up */
-static inline int netif_rx_schedule_prep(struct net_device *dev,
- struct napi_struct *napi)
+static inline int netif_rx_schedule_prep(struct napi_struct *napi)
{
return napi_schedule_prep(napi);
}
@@ -1453,27 +1563,24 @@ static inline int netif_rx_schedule_prep(struct net_device *dev,
/* Add interface to tail of rx poll list. This assumes that _prep has
* already been called and returned 1.
*/
-static inline void __netif_rx_schedule(struct net_device *dev,
- struct napi_struct *napi)
+static inline void __netif_rx_schedule(struct napi_struct *napi)
{
__napi_schedule(napi);
}
/* Try to reschedule poll. Called by irq handler. */
-static inline void netif_rx_schedule(struct net_device *dev,
- struct napi_struct *napi)
+static inline void netif_rx_schedule(struct napi_struct *napi)
{
- if (netif_rx_schedule_prep(dev, napi))
- __netif_rx_schedule(dev, napi);
+ if (netif_rx_schedule_prep(napi))
+ __netif_rx_schedule(napi);
}
/* Try to reschedule poll. Called by dev->poll() after netif_rx_complete(). */
-static inline int netif_rx_reschedule(struct net_device *dev,
- struct napi_struct *napi)
+static inline int netif_rx_reschedule(struct napi_struct *napi)
{
if (napi_schedule_prep(napi)) {
- __netif_rx_schedule(dev, napi);
+ __netif_rx_schedule(napi);
return 1;
}
return 0;
@@ -1482,8 +1589,7 @@ static inline int netif_rx_reschedule(struct net_device *dev,
/* same as netif_rx_complete, except that local_irq_save(flags)
* has already been issued
*/
-static inline void __netif_rx_complete(struct net_device *dev,
- struct napi_struct *napi)
+static inline void __netif_rx_complete(struct napi_struct *napi)
{
__napi_complete(napi);
}
@@ -1493,20 +1599,9 @@ static inline void __netif_rx_complete(struct net_device *dev,
* it completes the work. The device cannot be out of poll list at this
* moment, it is BUG().
*/
-static inline void netif_rx_complete(struct net_device *dev,
- struct napi_struct *napi)
+static inline void netif_rx_complete(struct napi_struct *napi)
{
- unsigned long flags;
-
- /*
- * don't let napi dequeue from the cpu poll list
- * just in case its running on a different cpu
- */
- if (unlikely(test_bit(NAPI_STATE_NPSVC, &napi->state)))
- return;
- local_irq_save(flags);
- __netif_rx_complete(dev, napi);
- local_irq_restore(flags);
+ napi_complete(napi);
}
static inline void __netif_tx_lock(struct netdev_queue *txq, int cpu)
@@ -1683,6 +1778,8 @@ extern void netdev_features_change(struct net_device *dev);
/* Load a device via the kmod */
extern void dev_load(struct net *net, const char *name);
extern void dev_mcast_init(void);
+extern const struct net_device_stats *dev_get_stats(struct net_device *dev);
+
extern int netdev_max_backlog;
extern int weight_p;
extern int netdev_set_master(struct net_device *dev, struct net_device *master);
@@ -1731,6 +1828,8 @@ static inline int netif_needs_gso(struct net_device *dev, struct sk_buff *skb)
{
return skb_is_gso(skb) &&
(!skb_gso_ok(skb, dev->features) ||
+ (skb_shinfo(skb)->frag_list &&
+ !(dev->features & NETIF_F_FRAGLIST)) ||
unlikely(skb->ip_summed != CHECKSUM_PARTIAL));
}
@@ -1749,26 +1848,31 @@ static inline int skb_bond_should_drop(struct sk_buff *skb)
struct net_device *dev = skb->dev;
struct net_device *master = dev->master;
- if (master &&
- (dev->priv_flags & IFF_SLAVE_INACTIVE)) {
- if ((dev->priv_flags & IFF_SLAVE_NEEDARP) &&
- skb->protocol == __constant_htons(ETH_P_ARP))
- return 0;
+ if (master) {
+ if (master->priv_flags & IFF_MASTER_ARPMON)
+ dev->last_rx = jiffies;
- if (master->priv_flags & IFF_MASTER_ALB) {
- if (skb->pkt_type != PACKET_BROADCAST &&
- skb->pkt_type != PACKET_MULTICAST)
+ if (dev->priv_flags & IFF_SLAVE_INACTIVE) {
+ if ((dev->priv_flags & IFF_SLAVE_NEEDARP) &&
+ skb->protocol == __constant_htons(ETH_P_ARP))
return 0;
- }
- if (master->priv_flags & IFF_MASTER_8023AD &&
- skb->protocol == __constant_htons(ETH_P_SLOW))
- return 0;
- return 1;
+ if (master->priv_flags & IFF_MASTER_ALB) {
+ if (skb->pkt_type != PACKET_BROADCAST &&
+ skb->pkt_type != PACKET_MULTICAST)
+ return 0;
+ }
+ if (master->priv_flags & IFF_MASTER_8023AD &&
+ skb->protocol == __constant_htons(ETH_P_SLOW))
+ return 0;
+
+ return 1;
+ }
}
return 0;
}
+extern struct pernet_operations __net_initdata loopback_net_ops;
#endif /* __KERNEL__ */
#endif /* _LINUX_DEV_H */
diff --git a/include/linux/netfilter_bridge/ebtables.h b/include/linux/netfilter_bridge/ebtables.h
index d45e29cd1cf..e40ddb94b1a 100644
--- a/include/linux/netfilter_bridge/ebtables.h
+++ b/include/linux/netfilter_bridge/ebtables.h
@@ -300,7 +300,8 @@ struct ebt_table
#define EBT_ALIGN(s) (((s) + (__alignof__(struct ebt_replace)-1)) & \
~(__alignof__(struct ebt_replace)-1))
-extern int ebt_register_table(struct ebt_table *table);
+extern struct ebt_table *ebt_register_table(struct net *net,
+ struct ebt_table *table);
extern void ebt_unregister_table(struct ebt_table *table);
extern unsigned int ebt_do_table(unsigned int hook, struct sk_buff *skb,
const struct net_device *in, const struct net_device *out,
diff --git a/include/linux/netfilter_ipv4/ipt_policy.h b/include/linux/netfilter_ipv4/ipt_policy.h
index b9478a25530..1037fb2cd20 100644
--- a/include/linux/netfilter_ipv4/ipt_policy.h
+++ b/include/linux/netfilter_ipv4/ipt_policy.h
@@ -1,6 +1,8 @@
#ifndef _IPT_POLICY_H
#define _IPT_POLICY_H
+#include <linux/netfilter/xt_policy.h>
+
#define IPT_POLICY_MAX_ELEM XT_POLICY_MAX_ELEM
/* ipt_policy_flags */
diff --git a/include/linux/netfilter_ipv6/ip6t_policy.h b/include/linux/netfilter_ipv6/ip6t_policy.h
index 6bab3163d2f..b1c449d7ec8 100644
--- a/include/linux/netfilter_ipv6/ip6t_policy.h
+++ b/include/linux/netfilter_ipv6/ip6t_policy.h
@@ -1,6 +1,8 @@
#ifndef _IP6T_POLICY_H
#define _IP6T_POLICY_H
+#include <linux/netfilter/xt_policy.h>
+
#define IP6T_POLICY_MAX_ELEM XT_POLICY_MAX_ELEM
/* ip6t_policy_flags */
diff --git a/include/linux/netlink.h b/include/linux/netlink.h
index 9ff1b54908f..51b09a1f46c 100644
--- a/include/linux/netlink.h
+++ b/include/linux/netlink.h
@@ -242,7 +242,8 @@ __nlmsg_put(struct sk_buff *skb, u32 pid, u32 seq, int type, int len, int flags)
nlh->nlmsg_flags = flags;
nlh->nlmsg_pid = pid;
nlh->nlmsg_seq = seq;
- memset(NLMSG_DATA(nlh) + len, 0, NLMSG_ALIGN(size) - size);
+ if (!__builtin_constant_p(size) || NLMSG_ALIGN(size) - size != 0)
+ memset(NLMSG_DATA(nlh) + len, 0, NLMSG_ALIGN(size) - size);
return nlh;
}
diff --git a/include/linux/netpoll.h b/include/linux/netpoll.h
index e3d79593fb3..e38d3c9dccd 100644
--- a/include/linux/netpoll.h
+++ b/include/linux/netpoll.h
@@ -94,11 +94,6 @@ static inline void netpoll_poll_unlock(void *have)
rcu_read_unlock();
}
-static inline void netpoll_netdev_init(struct net_device *dev)
-{
- INIT_LIST_HEAD(&dev->napi_list);
-}
-
#else
static inline int netpoll_rx(struct sk_buff *skb)
{
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 9bad65400fb..e86ed59f9ad 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -3,7 +3,26 @@
/*
* 802.11 netlink interface public header
*
- * Copyright 2006, 2007 Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2006, 2007, 2008 Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2008 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com>
+ * Copyright 2008 Michael Buesch <mb@bu3sch.de>
+ * Copyright 2008 Luis R. Rodriguez <lrodriguez@atheros.com>
+ * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
+ * Copyright 2008 Colin McCabe <colin@cozybit.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
*/
/**
@@ -25,8 +44,10 @@
*
* @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request
* to get a list of all present wiphys.
- * @NL80211_CMD_SET_WIPHY: set wiphy name, needs %NL80211_ATTR_WIPHY and
- * %NL80211_ATTR_WIPHY_NAME.
+ * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
+ * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
+ * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, and/or
+ * %NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET.
* @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
* or rename notification. Has attributes %NL80211_ATTR_WIPHY and
* %NL80211_ATTR_WIPHY_NAME.
@@ -106,6 +127,12 @@
* to the the specified ISO/IEC 3166-1 alpha2 country code. The core will
* store this as a valid request and then query userspace for it.
*
+ * @NL80211_CMD_GET_MESH_PARAMS: Get mesh networking properties for the
+ * interface identified by %NL80211_ATTR_IFINDEX
+ *
+ * @NL80211_CMD_SET_MESH_PARAMS: Set mesh networking properties for the
+ * interface identified by %NL80211_ATTR_IFINDEX
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -148,6 +175,9 @@ enum nl80211_commands {
NL80211_CMD_SET_REG,
NL80211_CMD_REQ_SET_REG,
+ NL80211_CMD_GET_MESH_PARAMS,
+ NL80211_CMD_SET_MESH_PARAMS,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -169,6 +199,15 @@ enum nl80211_commands {
* @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf.
* /sys/class/ieee80211/<phyname>/index
* @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
+ * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters
+ * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz
+ * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ
+ * if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included):
+ * NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including
+ * this attribute)
+ * NL80211_CHAN_HT20 = HT20 only
+ * NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel
+ * NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel
*
* @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
* @NL80211_ATTR_IFNAME: network interface name
@@ -234,6 +273,9 @@ enum nl80211_commands {
* (u8, 0 or 1)
* @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled
* (u8, 0 or 1)
+ * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic
+ * rates in format defined by IEEE 802.11 7.3.2.2 but without the length
+ * restriction (at most %NL80211_MAX_SUPP_RATES).
*
* @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from
* association request when used with NL80211_CMD_NEW_STATION)
@@ -296,6 +338,14 @@ enum nl80211_attrs {
NL80211_ATTR_REG_ALPHA2,
NL80211_ATTR_REG_RULES,
+ NL80211_ATTR_MESH_PARAMS,
+
+ NL80211_ATTR_BSS_BASIC_RATES,
+
+ NL80211_ATTR_WIPHY_TXQ_PARAMS,
+ NL80211_ATTR_WIPHY_FREQ,
+ NL80211_ATTR_WIPHY_CHANNEL_TYPE,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -307,6 +357,10 @@ enum nl80211_attrs {
* here
*/
#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY
+#define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES
+#define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS
+#define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ
+#define NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET
#define NL80211_MAX_SUPP_RATES 32
#define NL80211_MAX_SUPP_REG_RULES 32
@@ -371,6 +425,32 @@ enum nl80211_sta_flags {
};
/**
+ * enum nl80211_rate_info - bitrate information
+ *
+ * These attribute types are used with %NL80211_STA_INFO_TXRATE
+ * when getting information about the bitrate of a station.
+ *
+ * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
+ * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s)
+ * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8)
+ * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate
+ * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval
+ * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined
+ * @__NL80211_RATE_INFO_AFTER_LAST: internal use
+ */
+enum nl80211_rate_info {
+ __NL80211_RATE_INFO_INVALID,
+ NL80211_RATE_INFO_BITRATE,
+ NL80211_RATE_INFO_MCS,
+ NL80211_RATE_INFO_40_MHZ_WIDTH,
+ NL80211_RATE_INFO_SHORT_GI,
+
+ /* keep last */
+ __NL80211_RATE_INFO_AFTER_LAST,
+ NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1
+};
+
+/**
* enum nl80211_sta_info - station information
*
* These attribute types are used with %NL80211_ATTR_STA_INFO
@@ -382,6 +462,9 @@ enum nl80211_sta_flags {
* @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
* @__NL80211_STA_INFO_AFTER_LAST: internal
* @NL80211_STA_INFO_MAX: highest possible station info attribute
+ * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
+ * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
+ * containing info as possible, see &enum nl80211_sta_info_txrate.
*/
enum nl80211_sta_info {
__NL80211_STA_INFO_INVALID,
@@ -391,6 +474,8 @@ enum nl80211_sta_info {
NL80211_STA_INFO_LLID,
NL80211_STA_INFO_PLID,
NL80211_STA_INFO_PLINK_STATE,
+ NL80211_STA_INFO_SIGNAL,
+ NL80211_STA_INFO_TX_BITRATE,
/* keep last */
__NL80211_STA_INFO_AFTER_LAST,
@@ -452,17 +537,29 @@ enum nl80211_mpath_info {
* an array of nested frequency attributes
* @NL80211_BAND_ATTR_RATES: supported bitrates in this band,
* an array of nested bitrate attributes
+ * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as
+ * defined in 802.11n
+ * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE
+ * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n
+ * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n
*/
enum nl80211_band_attr {
__NL80211_BAND_ATTR_INVALID,
NL80211_BAND_ATTR_FREQS,
NL80211_BAND_ATTR_RATES,
+ NL80211_BAND_ATTR_HT_MCS_SET,
+ NL80211_BAND_ATTR_HT_CAPA,
+ NL80211_BAND_ATTR_HT_AMPDU_FACTOR,
+ NL80211_BAND_ATTR_HT_AMPDU_DENSITY,
+
/* keep last */
__NL80211_BAND_ATTR_AFTER_LAST,
NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1
};
+#define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA
+
/**
* enum nl80211_frequency_attr - frequency attributes
* @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz
@@ -474,6 +571,8 @@ enum nl80211_band_attr {
* on this channel in current regulatory domain.
* @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory
* on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
+ * (100 * dBm).
*/
enum nl80211_frequency_attr {
__NL80211_FREQUENCY_ATTR_INVALID,
@@ -482,12 +581,15 @@ enum nl80211_frequency_attr {
NL80211_FREQUENCY_ATTR_PASSIVE_SCAN,
NL80211_FREQUENCY_ATTR_NO_IBSS,
NL80211_FREQUENCY_ATTR_RADAR,
+ NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
/* keep last */
__NL80211_FREQUENCY_ATTR_AFTER_LAST,
NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1
};
+#define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER
+
/**
* enum nl80211_bitrate_attr - bitrate attributes
* @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps
@@ -594,4 +696,119 @@ enum nl80211_mntr_flags {
NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1
};
+/**
+ * enum nl80211_meshconf_params - mesh configuration parameters
+ *
+ * Mesh configuration parameters
+ *
+ * @__NL80211_MESHCONF_INVALID: internal use
+ *
+ * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in
+ * millisecond units, used by the Peer Link Open message
+ *
+ * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the inital confirm timeout, in
+ * millisecond units, used by the peer link management to close a peer link
+ *
+ * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in
+ * millisecond units
+ *
+ * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed
+ * on this mesh interface
+ *
+ * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link
+ * open retries that can be sent to establish a new peer link instance in a
+ * mesh
+ *
+ * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh
+ * point.
+ *
+ * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically
+ * open peer links when we detect compatible mesh peers.
+ *
+ * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames
+ * containing a PREQ that an MP can send to a particular destination (path
+ * target)
+ *
+ * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths
+ * (in milliseconds)
+ *
+ * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait
+ * until giving up on a path discovery (in milliseconds)
+ *
+ * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh
+ * points receiving a PREQ shall consider the forwarding information from the
+ * root to be valid. (TU = time unit)
+ *
+ * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in
+ * TUs) during which an MP can send only one action frame containing a PREQ
+ * reference element
+ *
+ * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
+ * that it takes for an HWMP information element to propagate across the mesh
+ *
+ * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
+ *
+ * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_meshconf_params {
+ __NL80211_MESHCONF_INVALID,
+ NL80211_MESHCONF_RETRY_TIMEOUT,
+ NL80211_MESHCONF_CONFIRM_TIMEOUT,
+ NL80211_MESHCONF_HOLDING_TIMEOUT,
+ NL80211_MESHCONF_MAX_PEER_LINKS,
+ NL80211_MESHCONF_MAX_RETRIES,
+ NL80211_MESHCONF_TTL,
+ NL80211_MESHCONF_AUTO_OPEN_PLINKS,
+ NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
+ NL80211_MESHCONF_PATH_REFRESH_TIME,
+ NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,
+ NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
+ NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
+ NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
+
+ /* keep last */
+ __NL80211_MESHCONF_ATTR_AFTER_LAST,
+ NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_txq_attr - TX queue parameter attributes
+ * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved
+ * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*)
+ * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning
+ * disabled
+ * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form
+ * 2^n-1 in the range 1..32767]
+ * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form
+ * 2^n-1 in the range 1..32767]
+ * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255]
+ * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal
+ * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number
+ */
+enum nl80211_txq_attr {
+ __NL80211_TXQ_ATTR_INVALID,
+ NL80211_TXQ_ATTR_QUEUE,
+ NL80211_TXQ_ATTR_TXOP,
+ NL80211_TXQ_ATTR_CWMIN,
+ NL80211_TXQ_ATTR_CWMAX,
+ NL80211_TXQ_ATTR_AIFS,
+
+ /* keep last */
+ __NL80211_TXQ_ATTR_AFTER_LAST,
+ NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1
+};
+
+enum nl80211_txq_q {
+ NL80211_TXQ_Q_VO,
+ NL80211_TXQ_Q_VI,
+ NL80211_TXQ_Q_BE,
+ NL80211_TXQ_Q_BK
+};
+
+enum nl80211_channel_type {
+ NL80211_CHAN_NO_HT,
+ NL80211_CHAN_HT20,
+ NL80211_CHAN_HT40MINUS,
+ NL80211_CHAN_HT40PLUS
+};
#endif /* __LINUX_NL80211_H */
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 77c4ed60b98..d7e54d98869 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -467,6 +467,8 @@ int genphy_restart_aneg(struct phy_device *phydev);
int genphy_config_aneg(struct phy_device *phydev);
int genphy_update_link(struct phy_device *phydev);
int genphy_read_status(struct phy_device *phydev);
+int genphy_suspend(struct phy_device *phydev);
+int genphy_resume(struct phy_device *phydev);
void phy_driver_unregister(struct phy_driver *drv);
int phy_driver_register(struct phy_driver *new_driver);
void phy_prepare_link(struct phy_device *phydev,
diff --git a/include/linux/pkt_cls.h b/include/linux/pkt_cls.h
index 7cf7824df77..e6aa8482ad7 100644
--- a/include/linux/pkt_cls.h
+++ b/include/linux/pkt_cls.h
@@ -394,6 +394,20 @@ enum
#define TCA_BASIC_MAX (__TCA_BASIC_MAX - 1)
+
+/* Cgroup classifier */
+
+enum
+{
+ TCA_CGROUP_UNSPEC,
+ TCA_CGROUP_ACT,
+ TCA_CGROUP_POLICE,
+ TCA_CGROUP_EMATCHES,
+ __TCA_CGROUP_MAX,
+};
+
+#define TCA_CGROUP_MAX (__TCA_CGROUP_MAX - 1)
+
/* Extended Matches */
struct tcf_ematch_tree_hdr
diff --git a/include/linux/pkt_sched.h b/include/linux/pkt_sched.h
index 5d921fa91a5..e3f133adba7 100644
--- a/include/linux/pkt_sched.h
+++ b/include/linux/pkt_sched.h
@@ -500,4 +500,20 @@ struct tc_netem_corrupt
#define NETEM_DIST_SCALE 8192
+/* DRR */
+
+enum
+{
+ TCA_DRR_UNSPEC,
+ TCA_DRR_QUANTUM,
+ __TCA_DRR_MAX
+};
+
+#define TCA_DRR_MAX (__TCA_DRR_MAX - 1)
+
+struct tc_drr_stats
+{
+ u32 deficit;
+};
+
#endif
diff --git a/include/linux/rculist_nulls.h b/include/linux/rculist_nulls.h
new file mode 100644
index 00000000000..f9ddd03961a
--- /dev/null
+++ b/include/linux/rculist_nulls.h
@@ -0,0 +1,110 @@
+#ifndef _LINUX_RCULIST_NULLS_H
+#define _LINUX_RCULIST_NULLS_H
+
+#ifdef __KERNEL__
+
+/*
+ * RCU-protected list version
+ */
+#include <linux/list_nulls.h>
+#include <linux/rcupdate.h>
+
+/**
+ * hlist_nulls_del_init_rcu - deletes entry from hash list with re-initialization
+ * @n: the element to delete from the hash list.
+ *
+ * Note: hlist_nulls_unhashed() on the node return true after this. It is
+ * useful for RCU based read lockfree traversal if the writer side
+ * must know if the list entry is still hashed or already unhashed.
+ *
+ * In particular, it means that we can not poison the forward pointers
+ * that may still be used for walking the hash list and we can only
+ * zero the pprev pointer so list_unhashed() will return true after
+ * this.
+ *
+ * The caller must take whatever precautions are necessary (such as
+ * holding appropriate locks) to avoid racing with another
+ * list-mutation primitive, such as hlist_nulls_add_head_rcu() or
+ * hlist_nulls_del_rcu(), running on this same list. However, it is
+ * perfectly legal to run concurrently with the _rcu list-traversal
+ * primitives, such as hlist_nulls_for_each_entry_rcu().
+ */
+static inline void hlist_nulls_del_init_rcu(struct hlist_nulls_node *n)
+{
+ if (!hlist_nulls_unhashed(n)) {
+ __hlist_nulls_del(n);
+ n->pprev = NULL;
+ }
+}
+
+/**
+ * hlist_nulls_del_rcu - deletes entry from hash list without re-initialization
+ * @n: the element to delete from the hash list.
+ *
+ * Note: hlist_nulls_unhashed() on entry does not return true after this,
+ * the entry is in an undefined state. It is useful for RCU based
+ * lockfree traversal.
+ *
+ * In particular, it means that we can not poison the forward
+ * pointers that may still be used for walking the hash list.
+ *
+ * The caller must take whatever precautions are necessary
+ * (such as holding appropriate locks) to avoid racing
+ * with another list-mutation primitive, such as hlist_nulls_add_head_rcu()
+ * or hlist_nulls_del_rcu(), running on this same list.
+ * However, it is perfectly legal to run concurrently with
+ * the _rcu list-traversal primitives, such as
+ * hlist_nulls_for_each_entry().
+ */
+static inline void hlist_nulls_del_rcu(struct hlist_nulls_node *n)
+{
+ __hlist_nulls_del(n);
+ n->pprev = LIST_POISON2;
+}
+
+/**
+ * hlist_nulls_add_head_rcu
+ * @n: the element to add to the hash list.
+ * @h: the list to add to.
+ *
+ * Description:
+ * Adds the specified element to the specified hlist_nulls,
+ * while permitting racing traversals.
+ *
+ * The caller must take whatever precautions are necessary
+ * (such as holding appropriate locks) to avoid racing
+ * with another list-mutation primitive, such as hlist_nulls_add_head_rcu()
+ * or hlist_nulls_del_rcu(), running on this same list.
+ * However, it is perfectly legal to run concurrently with
+ * the _rcu list-traversal primitives, such as
+ * hlist_nulls_for_each_entry_rcu(), used to prevent memory-consistency
+ * problems on Alpha CPUs. Regardless of the type of CPU, the
+ * list-traversal primitive must be guarded by rcu_read_lock().
+ */
+static inline void hlist_nulls_add_head_rcu(struct hlist_nulls_node *n,
+ struct hlist_nulls_head *h)
+{
+ struct hlist_nulls_node *first = h->first;
+
+ n->next = first;
+ n->pprev = &h->first;
+ rcu_assign_pointer(h->first, n);
+ if (!is_a_nulls(first))
+ first->pprev = &n->next;
+}
+/**
+ * hlist_nulls_for_each_entry_rcu - iterate over rcu list of given type
+ * @tpos: the type * to use as a loop cursor.
+ * @pos: the &struct hlist_nulls_node to use as a loop cursor.
+ * @head: the head for your list.
+ * @member: the name of the hlist_nulls_node within the struct.
+ *
+ */
+#define hlist_nulls_for_each_entry_rcu(tpos, pos, head, member) \
+ for (pos = rcu_dereference((head)->first); \
+ (!is_a_nulls(pos)) && \
+ ({ tpos = hlist_nulls_entry(pos, typeof(*tpos), member); 1; }); \
+ pos = rcu_dereference(pos->next))
+
+#endif
+#endif
diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
index 4cd64b0d982..164332cbb77 100644
--- a/include/linux/rfkill.h
+++ b/include/linux/rfkill.h
@@ -108,6 +108,7 @@ struct rfkill {
struct device dev;
struct list_head node;
+ enum rfkill_state state_for_resume;
};
#define to_rfkill(d) container_of(d, struct rfkill, dev)
@@ -148,11 +149,4 @@ static inline char *rfkill_get_led_name(struct rfkill *rfkill)
#endif
}
-/* rfkill notification chain */
-#define RFKILL_STATE_CHANGED 0x0001 /* state of a normal rfkill
- switch has changed */
-
-int register_rfkill_notifier(struct notifier_block *nb);
-int unregister_rfkill_notifier(struct notifier_block *nb);
-
#endif /* RFKILL_H */
diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h
index 2b3d51c6ec9..e88f7058b3a 100644
--- a/include/linux/rtnetlink.h
+++ b/include/linux/rtnetlink.h
@@ -107,6 +107,11 @@ enum {
RTM_GETADDRLABEL,
#define RTM_GETADDRLABEL RTM_GETADDRLABEL
+ RTM_GETDCB = 78,
+#define RTM_GETDCB RTM_GETDCB
+ RTM_SETDCB,
+#define RTM_SETDCB RTM_SETDCB
+
__RTM_MAX,
#define RTM_MAX (((__RTM_MAX + 3) & ~3) - 1)
};
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 2725f4e5a9b..cf2cb50f77d 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -250,6 +250,9 @@ typedef unsigned char *sk_buff_data_t;
* @tc_verd: traffic control verdict
* @ndisc_nodetype: router type (from link layer)
* @do_not_encrypt: set to prevent encryption of this frame
+ * @requeue: set to indicate that the wireless core should attempt
+ * a software retry on this frame if we failed to
+ * receive an ACK for it
* @dma_cookie: a cookie to one of several possible DMA operations
* done by skb DMA functions
* @secmark: security marking
@@ -269,8 +272,9 @@ struct sk_buff {
struct dst_entry *dst;
struct rtable *rtable;
};
+#ifdef CONFIG_XFRM
struct sec_path *sp;
-
+#endif
/*
* This is the control buffer. It is free to use for every
* layer. Please put your private variables there. If you
@@ -325,6 +329,7 @@ struct sk_buff {
#endif
#if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE)
__u8 do_not_encrypt:1;
+ __u8 requeue:1;
#endif
/* 0/13/14 bit hole */
@@ -488,6 +493,19 @@ static inline bool skb_queue_is_last(const struct sk_buff_head *list,
}
/**
+ * skb_queue_is_first - check if skb is the first entry in the queue
+ * @list: queue head
+ * @skb: buffer
+ *
+ * Returns true if @skb is the first buffer on the list.
+ */
+static inline bool skb_queue_is_first(const struct sk_buff_head *list,
+ const struct sk_buff *skb)
+{
+ return (skb->prev == (struct sk_buff *) list);
+}
+
+/**
* skb_queue_next - return the next packet in the queue
* @list: queue head
* @skb: current buffer
@@ -506,6 +524,24 @@ static inline struct sk_buff *skb_queue_next(const struct sk_buff_head *list,
}
/**
+ * skb_queue_prev - return the prev packet in the queue
+ * @list: queue head
+ * @skb: current buffer
+ *
+ * Return the prev packet in @list before @skb. It is only valid to
+ * call this if skb_queue_is_first() evaluates to false.
+ */
+static inline struct sk_buff *skb_queue_prev(const struct sk_buff_head *list,
+ const struct sk_buff *skb)
+{
+ /* This BUG_ON may seem severe, but if we just return then we
+ * are going to dereference garbage.
+ */
+ BUG_ON(skb_queue_is_first(list, skb));
+ return skb->prev;
+}
+
+/**
* skb_get - reference buffer
* @skb: buffer to reference
*
@@ -1647,8 +1683,12 @@ extern int skb_splice_bits(struct sk_buff *skb,
extern void skb_copy_and_csum_dev(const struct sk_buff *skb, u8 *to);
extern void skb_split(struct sk_buff *skb,
struct sk_buff *skb1, const u32 len);
+extern int skb_shift(struct sk_buff *tgt, struct sk_buff *skb,
+ int shiftlen);
extern struct sk_buff *skb_segment(struct sk_buff *skb, int features);
+extern int skb_gro_receive(struct sk_buff **head,
+ struct sk_buff *skb);
static inline void *skb_header_pointer(const struct sk_buff *skb, int offset,
int len, void *buffer)
@@ -1864,6 +1904,18 @@ static inline void skb_copy_queue_mapping(struct sk_buff *to, const struct sk_bu
to->queue_mapping = from->queue_mapping;
}
+#ifdef CONFIG_XFRM
+static inline struct sec_path *skb_sec_path(struct sk_buff *skb)
+{
+ return skb->sp;
+}
+#else
+static inline struct sec_path *skb_sec_path(struct sk_buff *skb)
+{
+ return NULL;
+}
+#endif
+
static inline int skb_is_gso(const struct sk_buff *skb)
{
return skb_shinfo(skb)->gso_size;
diff --git a/include/linux/smsc911x.h b/include/linux/smsc911x.h
new file mode 100644
index 00000000000..1cbf0313add
--- /dev/null
+++ b/include/linux/smsc911x.h
@@ -0,0 +1,47 @@
+/***************************************************************************
+ *
+ * Copyright (C) 2004-2008 SMSC
+ * Copyright (C) 2005-2008 ARM
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ ***************************************************************************/
+#ifndef __LINUX_SMSC911X_H__
+#define __LINUX_SMSC911X_H__
+
+#include <linux/phy.h>
+
+/* platform_device configuration data, should be assigned to
+ * the platform_device's dev.platform_data */
+struct smsc911x_platform_config {
+ unsigned int irq_polarity;
+ unsigned int irq_type;
+ unsigned int flags;
+ phy_interface_t phy_interface;
+};
+
+/* Constants for platform_device irq polarity configuration */
+#define SMSC911X_IRQ_POLARITY_ACTIVE_LOW 0
+#define SMSC911X_IRQ_POLARITY_ACTIVE_HIGH 1
+
+/* Constants for platform_device irq type configuration */
+#define SMSC911X_IRQ_TYPE_OPEN_DRAIN 0
+#define SMSC911X_IRQ_TYPE_PUSH_PULL 1
+
+/* Constants for flags */
+#define SMSC911X_USE_16BIT (BIT(0))
+#define SMSC911X_USE_32BIT (BIT(1))
+
+#endif /* __LINUX_SMSC911X_H__ */
diff --git a/include/linux/snmp.h b/include/linux/snmp.h
index 7a6e6bba4a7..aee3f1e1d1c 100644
--- a/include/linux/snmp.h
+++ b/include/linux/snmp.h
@@ -216,6 +216,9 @@ enum
LINUX_MIB_TCPSPURIOUSRTOS, /* TCPSpuriousRTOs */
LINUX_MIB_TCPMD5NOTFOUND, /* TCPMD5NotFound */
LINUX_MIB_TCPMD5UNEXPECTED, /* TCPMD5Unexpected */
+ LINUX_MIB_SACKSHIFTED,
+ LINUX_MIB_SACKMERGED,
+ LINUX_MIB_SACKSHIFTFALLBACK,
__LINUX_MIB_MAX
};
diff --git a/include/linux/sunrpc/svc_xprt.h b/include/linux/sunrpc/svc_xprt.h
index 6fd7b016517..0127daca435 100644
--- a/include/linux/sunrpc/svc_xprt.h
+++ b/include/linux/sunrpc/svc_xprt.h
@@ -139,14 +139,14 @@ static inline char *__svc_print_addr(struct sockaddr *addr,
{
switch (addr->sa_family) {
case AF_INET:
- snprintf(buf, len, "%u.%u.%u.%u, port=%u",
- NIPQUAD(((struct sockaddr_in *) addr)->sin_addr),
+ snprintf(buf, len, "%pI4, port=%u",
+ &((struct sockaddr_in *)addr)->sin_addr,
ntohs(((struct sockaddr_in *) addr)->sin_port));
break;
case AF_INET6:
- snprintf(buf, len, "%x:%x:%x:%x:%x:%x:%x:%x, port=%u",
- NIP6(((struct sockaddr_in6 *) addr)->sin6_addr),
+ snprintf(buf, len, "%pI6, port=%u",
+ &((struct sockaddr_in6 *)addr)->sin6_addr,
ntohs(((struct sockaddr_in6 *) addr)->sin6_port));
break;
diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
index 5e33761b9b8..5cdd0aa8bde 100644
--- a/include/linux/virtio_net.h
+++ b/include/linux/virtio_net.h
@@ -20,6 +20,7 @@
#define VIRTIO_NET_F_HOST_TSO6 12 /* Host can handle TSOv6 in. */
#define VIRTIO_NET_F_HOST_ECN 13 /* Host can handle TSO[6] w/ ECN in. */
#define VIRTIO_NET_F_HOST_UFO 14 /* Host can handle UFO in. */
+#define VIRTIO_NET_F_MRG_RXBUF 15 /* Host can merge receive buffers. */
struct virtio_net_config
{
@@ -44,4 +45,12 @@ struct virtio_net_hdr
__u16 csum_start; /* Position to start checksumming from */
__u16 csum_offset; /* Offset after that to place checksum */
};
+
+/* This is the version of the header to use when the MRG_RXBUF
+ * feature has been negotiated. */
+struct virtio_net_hdr_mrg_rxbuf {
+ struct virtio_net_hdr hdr;
+ __u16 num_buffers; /* Number of merged rx buffers */
+};
+
#endif /* _LINUX_VIRTIO_NET_H */
diff --git a/include/linux/xfrm.h b/include/linux/xfrm.h
index 4bc1e6b86cb..52f3abd453a 100644
--- a/include/linux/xfrm.h
+++ b/include/linux/xfrm.h
@@ -199,6 +199,9 @@ enum {
#define XFRM_MSG_NEWSPDINFO XFRM_MSG_NEWSPDINFO
XFRM_MSG_GETSPDINFO,
#define XFRM_MSG_GETSPDINFO XFRM_MSG_GETSPDINFO
+
+ XFRM_MSG_MAPPING,
+#define XFRM_MSG_MAPPING XFRM_MSG_MAPPING
__XFRM_MSG_MAX
};
#define XFRM_MSG_MAX (__XFRM_MSG_MAX - 1)
@@ -438,6 +441,15 @@ struct xfrm_user_migrate {
__u16 new_family;
};
+struct xfrm_user_mapping {
+ struct xfrm_usersa_id id;
+ __u32 reqid;
+ xfrm_address_t old_saddr;
+ xfrm_address_t new_saddr;
+ __be16 old_sport;
+ __be16 new_sport;
+};
+
#ifndef __KERNEL__
/* backwards compatibility for userspace */
#define XFRMGRP_ACQUIRE 1
@@ -464,6 +476,8 @@ enum xfrm_nlgroups {
#define XFRMNLGRP_REPORT XFRMNLGRP_REPORT
XFRMNLGRP_MIGRATE,
#define XFRMNLGRP_MIGRATE XFRMNLGRP_MIGRATE
+ XFRMNLGRP_MAPPING,
+#define XFRMNLGRP_MAPPING XFRMNLGRP_MAPPING
__XFRMNLGRP_MAX
};
#define XFRMNLGRP_MAX (__XFRMNLGRP_MAX - 1)