Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull second set of media updates from Mauro Carvalho Chehab:
 "Despite its size, most of the stuff here is trivial.  This series
  contains:

   - s5p-mfc: additions at the driver and at the core to support H.264
     hardware codec;
   - Some improvements at s5p and davinci embedded drivers;
   - Some V4L2 compliance fixes applied on a few drivers;
   - Several random trivial patches, including several fixes and a few
     new board support additions;

  Notes:

   1) Some Exynos media patches were dependent on some -arm fixes that
      got merged on changeset 782cd9e.  That's why this pull request is
      based that changeset.

   2) As promised, I reviewed the pending VB2 DMABUF series.

      While setting a test environment, it was noticed that the upstream
      support for Samsung Exynos 4 boards (smdk310 and Origen) are
      broken upstream, likely due to regressions: both defconfigs are
      wrong and regulator settings for both boards are broken.  That,
      allied with some bug at the dummy regulator driver, causes OOPSes
      during boot time.

      Long story short: even fixing the above, the proposed patches
      OOPSed when running the DMABUF test.  Not sure yet if the OOPSes
      are due to some other undetected regressions, or due to some bug
      on the patches.

      Due to the above, DMABUF patches for vb2 got NACKed for 3.7."

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (109 commits)
  [media] m5mols: Add missing #include <linux/sizes.h>
  [media] stk1160: Add support for S-Video input
  Revert "[media] omap3isp: Replace cpu_is_omap3630() with ISP revision check"
  [media]  dvb: LNA implementation changes
  [media] v4l2-ioctl: fix W=1 warnings
  [media] v4l2-ioctl: add blocks check for VIDIOC_SUBDEV_G/S_EDID
  [media] omap3isp: Fix compilation error in ispreg.h
  [media] rc-msi-digivox-ii: Add full scan keycodes
  [media] cx25821: testing the wrong variable
  [media] tda18271-common: hold the I2C adapter during write transfers
  [media] ds3000: add module parameter to force firmware upload
  [media] drivers/media: Remove unnecessary semicolon
  [media] winbond: remove space from driver name
  [media] iguanair: cannot send data from the stack
  [media] omap3isp: Replace cpu_is_omap3630() with ISP revision check
  [media] dvb-usb: print small buffers via %*ph
  [media] uvc: Add return code check at vb2_queue_init()
  [media] em28xx: Replace memcpy with struct assignment
  [media] bt8xx: Add video4linux control V4L2_CID_COLOR_KILLER
  [media] mem2mem_testdev: Use devm_kzalloc() in probe
  ...

Conflicts:
	arch/arm/mach-davinci/include/mach/da8xx.h

1 files changed, 48 insertions, 0 deletions

diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index 2ecd7377153..b137a5e1151 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -21,6 +21,7 @@
 #ifndef _V4L2_SUBDEV_H
 #define _V4L2_SUBDEV_H
 
+#include <linux/types.h>
 #include <linux/v4l2-subdev.h>
 #include <media/media-entity.h>
 #include <media/v4l2-common.h>
@@ -45,6 +46,7 @@ struct v4l2_fh;
 struct v4l2_subdev;
 struct v4l2_subdev_fh;
 struct tuner_setup;
+struct v4l2_mbus_frame_desc;
 
 /* decode_vbi_line */
 struct v4l2_decode_vbi_line {
@@ -226,6 +228,36 @@ struct v4l2_subdev_audio_ops {
 	int (*s_stream)(struct v4l2_subdev *sd, int enable);
 };
 
+/* Indicates the @length field specifies maximum data length. */
+#define V4L2_MBUS_FRAME_DESC_FL_LEN_MAX		(1U << 0)
+/* Indicates user defined data format, i.e. non standard frame format. */
+#define V4L2_MBUS_FRAME_DESC_FL_BLOB		(1U << 1)
+
+/**
+ * struct v4l2_mbus_frame_desc_entry - media bus frame description structure
+ * @flags: V4L2_MBUS_FRAME_DESC_FL_* flags
+ * @pixelcode: media bus pixel code, valid if FRAME_DESC_FL_BLOB is not set
+ * @length: number of octets per frame, valid for compressed or unspecified
+ *          formats
+ */
+struct v4l2_mbus_frame_desc_entry {
+	u16 flags;
+	u32 pixelcode;
+	u32 length;
+};
+
+#define V4L2_FRAME_DESC_ENTRY_MAX	4
+
+/**
+ * struct v4l2_mbus_frame_desc - media bus data frame description
+ * @entry: frame descriptors array
+ * @num_entries: number of entries in @entry array
+ */
+struct v4l2_mbus_frame_desc {
+	struct v4l2_mbus_frame_desc_entry entry[V4L2_FRAME_DESC_ENTRY_MAX];
+	unsigned short num_entries;
+};
+
 /*
    s_std_output: set v4l2_std_id for video OUTPUT devices. This is ignored by
 	video input devices.
@@ -274,6 +306,10 @@ struct v4l2_subdev_audio_ops {
    s_mbus_config: set a certain mediabus configuration. This operation is added
 	for compatibility with soc-camera drivers and should not be used by new
 	software.
+
+   s_rx_buffer: set a host allocated memory buffer for the subdev. The subdev
+	can adjust @size to a lower value and must not write more data to the
+	buffer starting at @data than the original value of @size.
  */
 struct v4l2_subdev_video_ops {
 	int (*s_routing)(struct v4l2_subdev *sd, u32 input, u32 output, u32 config);
@@ -327,6 +363,8 @@ struct v4l2_subdev_video_ops {
 			     struct v4l2_mbus_config *cfg);
 	int (*s_mbus_config)(struct v4l2_subdev *sd,
 			     const struct v4l2_mbus_config *cfg);
+	int (*s_rx_buffer)(struct v4l2_subdev *sd, void *buf,
+			   unsigned int *size);
 };
 
 /*
@@ -455,6 +493,12 @@ struct v4l2_subdev_ir_ops {
 				struct v4l2_subdev_ir_parameters *params);
 };
 
+/**
+ * struct v4l2_subdev_pad_ops - v4l2-subdev pad level operations
+ * @get_frame_desc: get the current low level media bus frame parameters.
+ * @get_frame_desc: set the low level media bus frame parameters, @fd array
+ *                  may be adjusted by the subdev driver to device capabilities.
+ */
 struct v4l2_subdev_pad_ops {
 	int (*enum_mbus_code)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
 			      struct v4l2_subdev_mbus_code_enum *code);
@@ -483,6 +527,10 @@ struct v4l2_subdev_pad_ops {
 			     struct v4l2_subdev_format *source_fmt,
 			     struct v4l2_subdev_format *sink_fmt);
 #endif /* CONFIG_MEDIA_CONTROLLER */
+	int (*get_frame_desc)(struct v4l2_subdev *sd, unsigned int pad,
+			      struct v4l2_mbus_frame_desc *fd);
+	int (*set_frame_desc)(struct v4l2_subdev *sd, unsigned int pad,
+			      struct v4l2_mbus_frame_desc *fd);
 };
 
 struct v4l2_subdev_ops {