Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights (1721 non-merge commits, this has to be a record of some
  sort):

   1) Add 'random' mode to team driver, from Jiri Pirko and Eric
      Dumazet.

   2) Make it so that any driver that supports configuration of multiple
      MAC addresses can provide the forwarding database add and del
      calls by providing a default implementation and hooking that up if
      the driver doesn't have an explicit set of handlers.  From Vlad
      Yasevich.

   3) Support GSO segmentation over tunnels and other encapsulating
      devices such as VXLAN, from Pravin B Shelar.

   4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton.

   5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita
      Dukkipati.

   6) In the PHY layer, allow supporting wake-on-lan in situations where
      the PHY registers have to be written for it to be configured.

      Use it to support wake-on-lan in mv643xx_eth.

      From Michael Stapelberg.

   7) Significantly improve firewire IPV6 support, from YOSHIFUJI
      Hideaki.

   8) Allow multiple packets to be sent in a single transmission using
      network coding in batman-adv, from Martin Hundebøll.

   9) Add support for T5 cxgb4 chips, from Santosh Rastapur.

  10) Generalize the VXLAN forwarding tables so that there is more
      flexibility in configurating various aspects of the endpoints.
      From David Stevens.

  11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver,
      from Dmitry Kravkov.

  12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo
      Neira Ayuso.

  13) Start adding networking selftests.

  14) In situations of overload on the same AF_PACKET fanout socket, or
      per-cpu packet receive queue, minimize drop by distributing the
      load to other cpus/fanouts.  From Willem de Bruijn and Eric
      Dumazet.

  15) Add support for new payload offset BPF instruction, from Daniel
      Borkmann.

  16) Convert several drivers over to mdoule_platform_driver(), from
      Sachin Kamat.

  17) Provide a minimal BPF JIT image disassembler userspace tool, from
      Daniel Borkmann.

  18) Rewrite F-RTO implementation in TCP to match the final
      specification of it in RFC4138 and RFC5682.  From Yuchung Cheng.

  19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear
      you like netlink, so I implemented netlink dumping of netlink
      sockets.") From Andrey Vagin.

  20) Remove ugly passing of rtnetlink attributes into rtnl_doit
      functions, from Thomas Graf.

  21) Allow userspace to be able to see if a configuration change occurs
      in the middle of an address or device list dump, from Nicolas
      Dichtel.

  22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes
      Frederic Sowa.

  23) Increase accuracy of packet length used by packet scheduler, from
      Jason Wang.

  24) Beginning set of changes to make ipv4/ipv6 fragment handling more
      scalable and less susceptible to overload and locking contention,
      from Jesper Dangaard Brouer.

  25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*()
      instead.  From Hong Zhiguo.

  26) Optimize route usage in IPVS by avoiding reference counting where
      possible, from Julian Anastasov.

  27) Convert IPVS schedulers to RCU, also from Julian Anastasov.

  28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger
      Eitzenberger.

  29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG,
      nfnetlink_log, and nfnetlink_queue.  From Gao feng.

  30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa.

  31) Support several new r8169 chips, from Hayes Wang.

  32) Support tokenized interface identifiers in ipv6, from Daniel
      Borkmann.

  33) Use usbnet_link_change() helper in USB net driver, from Ming Lei.

  34) Add 802.1ad vlan offload support, from Patrick McHardy.

  35) Support mmap() based netlink communication, also from Patrick
      McHardy.

  36) Support HW timestamping in mlx4 driver, from Amir Vadai.

  37) Rationalize AF_PACKET packet timestamping when transmitting, from
      Willem de Bruijn and Daniel Borkmann.

  38) Bring parity to what's provided by /proc/net/packet socket dumping
      and the info provided by netlink socket dumping of AF_PACKET
      sockets.  From Nicolas Dichtel.

  39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin
      Poirier"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits)
  filter: fix va_list build error
  af_unix: fix a fatal race with bit fields
  bnx2x: Prevent memory leak when cnic is absent
  bnx2x: correct reading of speed capabilities
  net: sctp: attribute printl with __printf for gcc fmt checks
  netlink: kconfig: move mmap i/o into netlink kconfig
  netpoll: convert mutex into a semaphore
  netlink: Fix skb ref counting.
  net_sched: act_ipt forward compat with xtables
  mlx4_en: fix a build error on 32bit arches
  Revert "bnx2x: allow nvram test to run when device is down"
  bridge: avoid OOPS if root port not found
  drivers: net: cpsw: fix kernel warn on cpsw irq enable
  sh_eth: use random MAC address if no valid one supplied
  3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA)
  tg3: fix to append hardware time stamping flags
  unix/stream: fix peeking with an offset larger than data in queue
  unix/dgram: fix peeking with an offset larger than data in queue
  unix/dgram: peek beyond 0-sized skbs
  openvswitch: Remove unneeded ovs_netdev_get_ifindex()
  ...

1 files changed, 144 insertions, 20 deletions

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index d581c6de5d6..26b5b692c22 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -611,22 +611,10 @@ struct cfg80211_ap_settings {
 };
 
 /**
- * enum plink_action - actions to perform in mesh peers
- *
- * @PLINK_ACTION_INVALID: action 0 is reserved
- * @PLINK_ACTION_OPEN: start mesh peer link establishment
- * @PLINK_ACTION_BLOCK: block traffic from this mesh peer
- */
-enum plink_actions {
-	PLINK_ACTION_INVALID,
-	PLINK_ACTION_OPEN,
-	PLINK_ACTION_BLOCK,
-};
-
-/**
  * enum station_parameters_apply_mask - station parameter values to apply
  * @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp)
  * @STATION_PARAM_APPLY_CAPABILITY: apply new capability
+ * @STATION_PARAM_APPLY_PLINK_STATE: apply new plink state
  *
  * Not all station parameters have in-band "no change" signalling,
  * for those that don't these flags will are used.
@@ -634,6 +622,7 @@ enum plink_actions {
 enum station_parameters_apply_mask {
 	STATION_PARAM_APPLY_UAPSD = BIT(0),
 	STATION_PARAM_APPLY_CAPABILITY = BIT(1),
+	STATION_PARAM_APPLY_PLINK_STATE = BIT(2),
 };
 
 /**
@@ -669,7 +658,7 @@ enum station_parameters_apply_mask {
  * @ext_capab_len: number of extended capabilities
  */
 struct station_parameters {
-	u8 *supported_rates;
+	const u8 *supported_rates;
 	struct net_device *vlan;
 	u32 sta_flags_mask, sta_flags_set;
 	u32 sta_modify_mask;
@@ -678,17 +667,60 @@ struct station_parameters {
 	u8 supported_rates_len;
 	u8 plink_action;
 	u8 plink_state;
-	struct ieee80211_ht_cap *ht_capa;
-	struct ieee80211_vht_cap *vht_capa;
+	const struct ieee80211_ht_cap *ht_capa;
+	const struct ieee80211_vht_cap *vht_capa;
 	u8 uapsd_queues;
 	u8 max_sp;
 	enum nl80211_mesh_power_mode local_pm;
 	u16 capability;
-	u8 *ext_capab;
+	const u8 *ext_capab;
 	u8 ext_capab_len;
 };
 
 /**
+ * enum cfg80211_station_type - the type of station being modified
+ * @CFG80211_STA_AP_CLIENT: client of an AP interface
+ * @CFG80211_STA_AP_MLME_CLIENT: client of an AP interface that has
+ *	the AP MLME in the device
+ * @CFG80211_STA_AP_STA: AP station on managed interface
+ * @CFG80211_STA_IBSS: IBSS station
+ * @CFG80211_STA_TDLS_PEER_SETUP: TDLS peer on managed interface (dummy entry
+ *	while TDLS setup is in progress, it moves out of this state when
+ *	being marked authorized; use this only if TDLS with external setup is
+ *	supported/used)
+ * @CFG80211_STA_TDLS_PEER_ACTIVE: TDLS peer on managed interface (active
+ *	entry that is operating, has been marked authorized by userspace)
+ * @CFG80211_STA_MESH_PEER_KERNEL: peer on mesh interface (kernel managed)
+ * @CFG80211_STA_MESH_PEER_USER: peer on mesh interface (user managed)
+ */
+enum cfg80211_station_type {
+	CFG80211_STA_AP_CLIENT,
+	CFG80211_STA_AP_MLME_CLIENT,
+	CFG80211_STA_AP_STA,
+	CFG80211_STA_IBSS,
+	CFG80211_STA_TDLS_PEER_SETUP,
+	CFG80211_STA_TDLS_PEER_ACTIVE,
+	CFG80211_STA_MESH_PEER_KERNEL,
+	CFG80211_STA_MESH_PEER_USER,
+};
+
+/**
+ * cfg80211_check_station_change - validate parameter changes
+ * @wiphy: the wiphy this operates on
+ * @params: the new parameters for a station
+ * @statype: the type of station being modified
+ *
+ * Utility function for the @change_station driver method. Call this function
+ * with the appropriate station type looking up the station (and checking that
+ * it exists). It will verify whether the station change is acceptable, and if
+ * not will return an error code. Note that it may modify the parameters for
+ * backward compatibility reasons, so don't use them before calling this.
+ */
+int cfg80211_check_station_change(struct wiphy *wiphy,
+				  struct station_parameters *params,
+				  enum cfg80211_station_type statype);
+
+/**
  * enum station_info_flags - station information flags
  *
  * Used by the driver to indicate which info in &struct station_info
@@ -1119,6 +1151,7 @@ struct mesh_config {
  * @ie_len: length of vendor information elements
  * @is_authenticated: this mesh requires authentication
  * @is_secure: this mesh uses security
+ * @user_mpm: userspace handles all MPM functions
  * @dtim_period: DTIM period to use
  * @beacon_interval: beacon interval to use
  * @mcast_rate: multicat rate for Mesh Node [6Mbps is the default for 802.11a]
@@ -1136,6 +1169,7 @@ struct mesh_setup {
 	u8 ie_len;
 	bool is_authenticated;
 	bool is_secure;
+	bool user_mpm;
 	u8 dtim_period;
 	u16 beacon_interval;
 	int mcast_rate[IEEE80211_NUM_BANDS];
@@ -1398,9 +1432,11 @@ struct cfg80211_auth_request {
  * enum cfg80211_assoc_req_flags - Over-ride default behaviour in association.
  *
  * @ASSOC_REQ_DISABLE_HT:  Disable HT (802.11n)
+ * @ASSOC_REQ_DISABLE_VHT:  Disable VHT
  */
 enum cfg80211_assoc_req_flags {
 	ASSOC_REQ_DISABLE_HT		= BIT(0),
+	ASSOC_REQ_DISABLE_VHT		= BIT(1),
 };
 
 /**
@@ -1422,6 +1458,8 @@ enum cfg80211_assoc_req_flags {
  * @ht_capa:  HT Capabilities over-rides.  Values set in ht_capa_mask
  *   will be used in ht_capa.  Un-supported values will be ignored.
  * @ht_capa_mask:  The bits of ht_capa which are to be used.
+ * @vht_capa: VHT capability override
+ * @vht_capa_mask: VHT capability mask indicating which fields to use
  */
 struct cfg80211_assoc_request {
 	struct cfg80211_bss *bss;
@@ -1432,6 +1470,7 @@ struct cfg80211_assoc_request {
 	u32 flags;
 	struct ieee80211_ht_cap ht_capa;
 	struct ieee80211_ht_cap ht_capa_mask;
+	struct ieee80211_vht_cap vht_capa, vht_capa_mask;
 };
 
 /**
@@ -1542,6 +1581,8 @@ struct cfg80211_ibss_params {
  * @ht_capa:  HT Capabilities over-rides.  Values set in ht_capa_mask
  *   will be used in ht_capa.  Un-supported values will be ignored.
  * @ht_capa_mask:  The bits of ht_capa which are to be used.
+ * @vht_capa:  VHT Capability overrides
+ * @vht_capa_mask: The bits of vht_capa which are to be used.
  */
 struct cfg80211_connect_params {
 	struct ieee80211_channel *channel;
@@ -1560,6 +1601,8 @@ struct cfg80211_connect_params {
 	int bg_scan_period;
 	struct ieee80211_ht_cap ht_capa;
 	struct ieee80211_ht_cap ht_capa_mask;
+	struct ieee80211_vht_cap vht_capa;
+	struct ieee80211_vht_cap vht_capa_mask;
 };
 
 /**
@@ -1722,6 +1765,21 @@ struct cfg80211_gtk_rekey_data {
 };
 
 /**
+ * struct cfg80211_update_ft_ies_params - FT IE Information
+ *
+ * This structure provides information needed to update the fast transition IE
+ *
+ * @md: The Mobility Domain ID, 2 Octet value
+ * @ie: Fast Transition IEs
+ * @ie_len: Length of ft_ie in octets
+ */
+struct cfg80211_update_ft_ies_params {
+	u16 md;
+	const u8 *ie;
+	size_t ie_len;
+};
+
+/**
  * struct cfg80211_ops - backend description for wireless configuration
  *
  * This struct is registered by fullmac card drivers and/or wireless stacks
@@ -1781,9 +1839,8 @@ struct cfg80211_gtk_rekey_data {
  * @change_station: Modify a given station. Note that flags changes are not much
  *	validated in cfg80211, in particular the auth/assoc/authorized flags
  *	might come to the driver in invalid combinations -- make sure to check
- *	them, also against the existing state! Also, supported_rates changes are
- *	not checked in station mode -- drivers need to reject (or ignore) them
- *	for anything but TDLS peers.
+ *	them, also against the existing state! Drivers must call
+ *	cfg80211_check_station_change() to validate the information.
  * @get_station: get station information for the station identified by @mac
  * @dump_station: dump station callback -- resume dump at index @idx
  *
@@ -1941,6 +1998,16 @@ struct cfg80211_gtk_rekey_data {
  *	advertise the support for MAC based ACL have to implement this callback.
  *
  * @start_radar_detection: Start radar detection in the driver.
+ *
+ * @update_ft_ies: Provide updated Fast BSS Transition information to the
+ *	driver. If the SME is in the driver/firmware, this information can be
+ *	used in building Authentication and Reassociation Request frames.
+ *
+ * @crit_proto_start: Indicates a critical protocol needs more link reliability
+ *	for a given duration (milliseconds). The protocol is provided so the
+ *	driver can take the most appropriate actions.
+ * @crit_proto_stop: Indicates critical protocol no longer needs increased link
+ *	reliability. This operation can not fail.
  */
 struct cfg80211_ops {
 	int	(*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -2168,6 +2235,14 @@ struct cfg80211_ops {
 	int	(*start_radar_detection)(struct wiphy *wiphy,
 					 struct net_device *dev,
 					 struct cfg80211_chan_def *chandef);
+	int	(*update_ft_ies)(struct wiphy *wiphy, struct net_device *dev,
+				 struct cfg80211_update_ft_ies_params *ftie);
+	int	(*crit_proto_start)(struct wiphy *wiphy,
+				    struct wireless_dev *wdev,
+				    enum nl80211_crit_proto_id protocol,
+				    u16 duration);
+	void	(*crit_proto_stop)(struct wiphy *wiphy,
+				   struct wireless_dev *wdev);
 };
 
 /*
@@ -2485,6 +2560,8 @@ struct wiphy_wowlan_support {
  * @ap_sme_capa: AP SME capabilities, flags from &enum nl80211_ap_sme_features.
  * @ht_capa_mod_mask:  Specify what ht_cap values can be over-ridden.
  *	If null, then none can be over-ridden.
+ * @vht_capa_mod_mask:  Specify what VHT capabilities can be over-ridden.
+ *	If null, then none can be over-ridden.
  *
  * @max_acl_mac_addrs: Maximum number of MAC addresses that the device
  *	supports for ACL.
@@ -2593,6 +2670,7 @@ struct wiphy {
 	struct dentry *debugfsdir;
 
 	const struct ieee80211_ht_cap *ht_capa_mod_mask;
+	const struct ieee80211_vht_cap *vht_capa_mod_mask;
 
 #ifdef CONFIG_NET_NS
 	/* the network namespace this phy lives in currently */
@@ -3958,6 +4036,17 @@ bool cfg80211_reg_can_beacon(struct wiphy *wiphy,
 void cfg80211_ch_switch_notify(struct net_device *dev,
 			       struct cfg80211_chan_def *chandef);
 
+/**
+ * ieee80211_operating_class_to_band - convert operating class to band
+ *
+ * @operating_class: the operating class to convert
+ * @band: band pointer to fill
+ *
+ * Returns %true if the conversion was successful, %false otherwise.
+ */
+bool ieee80211_operating_class_to_band(u8 operating_class,
+				       enum ieee80211_band *band);
+
 /*
  * cfg80211_tdls_oper_request - request userspace to perform TDLS operation
  * @dev: the device on which the operation is requested
@@ -4002,6 +4091,30 @@ u32 cfg80211_calculate_bitrate(struct rate_info *rate);
 void cfg80211_unregister_wdev(struct wireless_dev *wdev);
 
 /**
+ * struct cfg80211_ft_event - FT Information Elements
+ * @ies: FT IEs
+ * @ies_len: length of the FT IE in bytes
+ * @target_ap: target AP's MAC address
+ * @ric_ies: RIC IE
+ * @ric_ies_len: length of the RIC IE in bytes
+ */
+struct cfg80211_ft_event_params {
+	const u8 *ies;
+	size_t ies_len;
+	const u8 *target_ap;
+	const u8 *ric_ies;
+	size_t ric_ies_len;
+};
+
+/**
+ * cfg80211_ft_event - notify userspace about FT IE and RIC IE
+ * @netdev: network device
+ * @ft_event: IE information
+ */
+void cfg80211_ft_event(struct net_device *netdev,
+		       struct cfg80211_ft_event_params *ft_event);
+
+/**
  * cfg80211_get_p2p_attr - find and copy a P2P attribute from IE buffer
  * @ies: the input IE buffer
  * @len: the input length
@@ -4036,6 +4149,17 @@ void cfg80211_report_wowlan_wakeup(struct wireless_dev *wdev,
 				   struct cfg80211_wowlan_wakeup *wakeup,
 				   gfp_t gfp);
 
+/**
+ * cfg80211_crit_proto_stopped() - indicate critical protocol stopped by driver.
+ *
+ * @wdev: the wireless device for which critical protocol is stopped.
+ *
+ * This function can be called by the driver to indicate it has reverted
+ * operation back to normal. One reason could be that the duration given
+ * by .crit_proto_start() has expired.
+ */
+void cfg80211_crit_proto_stopped(struct wireless_dev *wdev, gfp_t gfp);
+
 /* Logging, debugging and troubleshooting/diagnostic helpers. */
 
 /* wiphy_printk helpers, similar to dev_printk */