Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking updates from David Miller:

 1) Alexey Kuznetsov noticed we routed TCP resets improperly in the
    assymetric routing case, fix this by reverting a change that made us
    use the incoming interface in the outgoing route key when we didn't
    have a socket context to work with.

 2) TCP sysctl kernel memory leakage to userspace fix from Alan Cox.

 3) Move UAPI bits from David Howells, WIMAX and CAN this time.

 4) Fix TX stalls in e1000e wrt.  Byte Queue Limits, from Hiroaki
    SHIMODA, Denys Fedoryshchenko, and Jesse Brandeburg.

 5) Fix IPV6 crashes in packet generator module, from Amerigo Wang.

 6) Tidies and fixes in the new VXLAN driver from Stephen Hemminger.

 7) Bridge IP options parse doesn't check first if SKB header has at
    least an IP header's worth of content present.  Fix from Sarveshwar
    Bandi.

 8) The kernel now generates compound pages on transmit and the Xen
    netback drivers needs some adjustments in order to handle this.  Fix
    from Ian Campbell.

 9) Turn off ASPM in JME driver, from Kevin Bardon and Matthew Garrett.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
  mcs7830: Fix link state detection
  net: add doc for in4_pton()
  net: add doc for in6_pton()
  vti: fix sparse bit endian warnings
  tcp: resets are misrouted
  usbnet: Support devices reporting idleness
  Add CDC-ACM support for the CX93010-2x UCMxx USB Modem
  net/ethernet/jme: disable ASPM
  tcp: sysctl interface leaks 16 bytes of kernel memory
  kaweth: print correct debug ptr
  e1000e: Change wthresh to 1 to avoid possible Tx stalls
  ipv4: fix route mark sparse warning
  xen: netback: handle compound page fragments on transmit.
  bridge: Pull ip header into skb->data before looking into ip header.
  isdn: fix a wrapping bug in isdn_ppp_ioctl()
  vxlan: fix oops when give unknown ifindex
  vxlan: fix receive checksum handling
  vxlan: add additional headroom
  vxlan: allow configuring port range
  vxlan: associate with tunnel socket on transmit
  ...

1 files changed, 122 insertions, 0 deletions

diff --git a/include/uapi/linux/can/netlink.h b/include/uapi/linux/can/netlink.h
new file mode 100644
index 00000000000..14966ddb7df
--- /dev/null
+++ b/include/uapi/linux/can/netlink.h
@@ -0,0 +1,122 @@
+/*
+ * linux/can/netlink.h
+ *
+ * Definitions for the CAN netlink interface
+ *
+ * Copyright (c) 2009 Wolfgang Grandegger <wg@grandegger.com>
+ *
+ */
+
+#ifndef CAN_NETLINK_H
+#define CAN_NETLINK_H
+
+#include <linux/types.h>
+
+/*
+ * CAN bit-timing parameters
+ *
+ * For further information, please read chapter "8 BIT TIMING
+ * REQUIREMENTS" of the "Bosch CAN Specification version 2.0"
+ * at http://www.semiconductors.bosch.de/pdf/can2spec.pdf.
+ */
+struct can_bittiming {
+	__u32 bitrate;		/* Bit-rate in bits/second */
+	__u32 sample_point;	/* Sample point in one-tenth of a percent */
+	__u32 tq;		/* Time quanta (TQ) in nanoseconds */
+	__u32 prop_seg;		/* Propagation segment in TQs */
+	__u32 phase_seg1;	/* Phase buffer segment 1 in TQs */
+	__u32 phase_seg2;	/* Phase buffer segment 2 in TQs */
+	__u32 sjw;		/* Synchronisation jump width in TQs */
+	__u32 brp;		/* Bit-rate prescaler */
+};
+
+/*
+ * CAN harware-dependent bit-timing constant
+ *
+ * Used for calculating and checking bit-timing parameters
+ */
+struct can_bittiming_const {
+	char name[16];		/* Name of the CAN controller hardware */
+	__u32 tseg1_min;	/* Time segement 1 = prop_seg + phase_seg1 */
+	__u32 tseg1_max;
+	__u32 tseg2_min;	/* Time segement 2 = phase_seg2 */
+	__u32 tseg2_max;
+	__u32 sjw_max;		/* Synchronisation jump width */
+	__u32 brp_min;		/* Bit-rate prescaler */
+	__u32 brp_max;
+	__u32 brp_inc;
+};
+
+/*
+ * CAN clock parameters
+ */
+struct can_clock {
+	__u32 freq;		/* CAN system clock frequency in Hz */
+};
+
+/*
+ * CAN operational and error states
+ */
+enum can_state {
+	CAN_STATE_ERROR_ACTIVE = 0,	/* RX/TX error count < 96 */
+	CAN_STATE_ERROR_WARNING,	/* RX/TX error count < 128 */
+	CAN_STATE_ERROR_PASSIVE,	/* RX/TX error count < 256 */
+	CAN_STATE_BUS_OFF,		/* RX/TX error count >= 256 */
+	CAN_STATE_STOPPED,		/* Device is stopped */
+	CAN_STATE_SLEEPING,		/* Device is sleeping */
+	CAN_STATE_MAX
+};
+
+/*
+ * CAN bus error counters
+ */
+struct can_berr_counter {
+	__u16 txerr;
+	__u16 rxerr;
+};
+
+/*
+ * CAN controller mode
+ */
+struct can_ctrlmode {
+	__u32 mask;
+	__u32 flags;
+};
+
+#define CAN_CTRLMODE_LOOPBACK		0x01	/* Loopback mode */
+#define CAN_CTRLMODE_LISTENONLY		0x02 	/* Listen-only mode */
+#define CAN_CTRLMODE_3_SAMPLES		0x04	/* Triple sampling mode */
+#define CAN_CTRLMODE_ONE_SHOT		0x08	/* One-Shot mode */
+#define CAN_CTRLMODE_BERR_REPORTING	0x10	/* Bus-error reporting */
+
+/*
+ * CAN device statistics
+ */
+struct can_device_stats {
+	__u32 bus_error;	/* Bus errors */
+	__u32 error_warning;	/* Changes to error warning state */
+	__u32 error_passive;	/* Changes to error passive state */
+	__u32 bus_off;		/* Changes to bus off state */
+	__u32 arbitration_lost; /* Arbitration lost errors */
+	__u32 restarts;		/* CAN controller re-starts */
+};
+
+/*
+ * CAN netlink interface
+ */
+enum {
+	IFLA_CAN_UNSPEC,
+	IFLA_CAN_BITTIMING,
+	IFLA_CAN_BITTIMING_CONST,
+	IFLA_CAN_CLOCK,
+	IFLA_CAN_STATE,
+	IFLA_CAN_CTRLMODE,
+	IFLA_CAN_RESTART_MS,
+	IFLA_CAN_RESTART,
+	IFLA_CAN_BERR_COUNTER,
+	__IFLA_CAN_MAX
+};
+
+#define IFLA_CAN_MAX	(__IFLA_CAN_MAX - 1)
+
+#endif /* CAN_NETLINK_H */