Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem

Conflicts:
	drivers/net/wireless/iwlwifi/dvm/tx.c
	drivers/net/wireless/ti/wlcore/sdio.c
	drivers/net/wireless/ti/wlcore/spi.c

1 files changed, 269 insertions, 5 deletions

diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 5b7dbc1ea96..c46bb016f4e 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -513,6 +513,12 @@
  *	command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For
  *	more background information, see
  *	http://wireless.kernel.org/en/users/Documentation/WoWLAN.
+ *	The @NL80211_CMD_SET_WOWLAN command can also be used as a notification
+ *	from the driver reporting the wakeup reason. In this case, the
+ *	@NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason
+ *	for the wakeup, if it was caused by wireless. If it is not present
+ *	in the wakeup notification, the wireless device didn't cause the
+ *	wakeup but reports that it was woken up.
  *
  * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver
  *	the necessary information for supporting GTK rekey offload. This
@@ -597,6 +603,14 @@
  *	command is used in AP/P2P GO mode. Driver has to make sure to clear its
  *	ACL list during %NL80211_CMD_STOP_AP.
  *
+ * @NL80211_CMD_RADAR_DETECT: Start a Channel availability check (CAC). Once
+ *	a radar is detected or the channel availability scan (CAC) has finished
+ *	or was aborted, or a radar was detected, usermode will be notified with
+ *	this event. This command is also used to notify userspace about radars
+ *	while operating on this channel.
+ *	%NL80211_ATTR_RADAR_EVENT is used to inform about the type of the
+ *	event.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -749,6 +763,8 @@ enum nl80211_commands {
 
 	NL80211_CMD_SET_MAC_ACL,
 
+	NL80211_CMD_RADAR_DETECT,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -1336,6 +1352,22 @@ enum nl80211_commands {
  *	number of MAC addresses that a device can support for MAC
  *	ACL.
  *
+ * @NL80211_ATTR_RADAR_EVENT: Type of radar event for notification to userspace,
+ *	contains a value of enum nl80211_radar_event (u32).
+ *
+ * @NL80211_ATTR_EXT_CAPA: 802.11 extended capabilities that the kernel driver
+ *	has and handles. The format is the same as the IE contents. See
+ *	802.11-2012 8.4.2.29 for more information.
+ * @NL80211_ATTR_EXT_CAPA_MASK: Extended capabilities that the kernel driver
+ *	has set in the %NL80211_ATTR_EXT_CAPA value, for multibit fields.
+ *
+ * @NL80211_ATTR_STA_CAPABILITY: Station capabilities (u16) are advertised to
+ *	the driver, e.g., to enable TDLS power save (PU-APSD).
+ *
+ * @NL80211_ATTR_STA_EXT_CAPABILITY: Station extended capabilities are
+ *	advertised to the driver, e.g., to enable TDLS off channel operations
+ *	and PU-APSD.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -1614,6 +1646,14 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_MAC_ACL_MAX,
 
+	NL80211_ATTR_RADAR_EVENT,
+
+	NL80211_ATTR_EXT_CAPA,
+	NL80211_ATTR_EXT_CAPA_MASK,
+
+	NL80211_ATTR_STA_CAPABILITY,
+	NL80211_ATTR_STA_EXT_CAPABILITY,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -1851,6 +1891,8 @@ enum nl80211_sta_bss_param {
  * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
  * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
  * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
+ * @NL80211_STA_INFO_RX_BYTES64: total received bytes (u64, from this station)
+ * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (u64, to this station)
  * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
  * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
  * 	containing info as possible, see &enum nl80211_rate_info
@@ -1903,6 +1945,8 @@ enum nl80211_sta_info {
 	NL80211_STA_INFO_LOCAL_PM,
 	NL80211_STA_INFO_PEER_PM,
 	NL80211_STA_INFO_NONPEER_PM,
+	NL80211_STA_INFO_RX_BYTES64,
+	NL80211_STA_INFO_TX_BYTES64,
 
 	/* keep last */
 	__NL80211_STA_INFO_AFTER_LAST,
@@ -2012,6 +2056,20 @@ enum nl80211_band_attr {
  *	on this channel in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
  *	(100 * dBm).
+ * @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS
+ *	(enum nl80211_dfs_state)
+ * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long
+ *	this channel is in this DFS state.
+ * @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this
+ *	channel as the control channel
+ * @NL80211_FREQUENCY_ATTR_NO_HT40_PLUS: HT40+ isn't possible with this
+ *	channel as the control channel
+ * @NL80211_FREQUENCY_ATTR_NO_80MHZ: any 80 MHz channel using this channel
+ *	as the primary or any of the secondary channels isn't possible,
+ *	this includes 80+80 channels
+ * @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel
+ *	using this channel as the primary or any of the secondary channels
+ *	isn't possible
  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
  *	currently defined
  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@@ -2024,6 +2082,12 @@ enum nl80211_frequency_attr {
 	NL80211_FREQUENCY_ATTR_NO_IBSS,
 	NL80211_FREQUENCY_ATTR_RADAR,
 	NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
+	NL80211_FREQUENCY_ATTR_DFS_STATE,
+	NL80211_FREQUENCY_ATTR_DFS_TIME,
+	NL80211_FREQUENCY_ATTR_NO_HT40_MINUS,
+	NL80211_FREQUENCY_ATTR_NO_HT40_PLUS,
+	NL80211_FREQUENCY_ATTR_NO_80MHZ,
+	NL80211_FREQUENCY_ATTR_NO_160MHZ,
 
 	/* keep last */
 	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
@@ -2896,10 +2960,12 @@ enum nl80211_tx_power_setting {
  *	corresponds to the lowest-order bit in the second byte of the mask.
  *	For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where
  *	xx indicates "don't care") would be represented by a pattern of
- *	twelve zero bytes, and a mask of "0xed,0x07".
+ *	twelve zero bytes, and a mask of "0xed,0x01".
  *	Note that the pattern matching is done as though frames were not
  *	802.11 frames but 802.3 frames, i.e. the frame is fully unpacked
  *	first (including SNAP header unpacking) and then matched.
+ * @NL80211_WOWLAN_PKTPAT_OFFSET: packet offset, pattern is matched after
+ *	these fixed number of bytes of received packet
  * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes
  * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number
  */
@@ -2907,6 +2973,7 @@ enum nl80211_wowlan_packet_pattern_attr {
 	__NL80211_WOWLAN_PKTPAT_INVALID,
 	NL80211_WOWLAN_PKTPAT_MASK,
 	NL80211_WOWLAN_PKTPAT_PATTERN,
+	NL80211_WOWLAN_PKTPAT_OFFSET,
 
 	NUM_NL80211_WOWLAN_PKTPAT,
 	MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1,
@@ -2917,6 +2984,7 @@ enum nl80211_wowlan_packet_pattern_attr {
  * @max_patterns: maximum number of patterns supported
  * @min_pattern_len: minimum length of each pattern
  * @max_pattern_len: maximum length of each pattern
+ * @max_pkt_offset: maximum Rx packet offset
  *
  * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when
  * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the
@@ -2926,6 +2994,7 @@ struct nl80211_wowlan_pattern_support {
 	__u32 max_patterns;
 	__u32 min_pattern_len;
 	__u32 max_pattern_len;
+	__u32 max_pkt_offset;
 } __attribute__((packed));
 
 /**
@@ -2941,12 +3010,17 @@ struct nl80211_wowlan_pattern_support {
  * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns
  *	which are passed in an array of nested attributes, each nested attribute
  *	defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern.
- *	Each pattern defines a wakeup packet. The matching is done on the MSDU,
- *	i.e. as though the packet was an 802.3 packet, so the pattern matching
- *	is done after the packet is converted to the MSDU.
+ *	Each pattern defines a wakeup packet. Packet offset is associated with
+ *	each pattern which is used while matching the pattern. The matching is
+ *	done on the MSDU, i.e. as though the packet was an 802.3 packet, so the
+ *	pattern matching is done after the packet is converted to the MSDU.
  *
  *	In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
  *	carrying a &struct nl80211_wowlan_pattern_support.
+ *
+ *	When reporting wakeup. it is a u32 attribute containing the 0-based
+ *	index of the pattern that caused the wakeup, in the patterns passed
+ *	to the kernel when configuring.
  * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be
  *	used when setting, used only to indicate that GTK rekeying is supported
  *	by the device (flag)
@@ -2957,8 +3031,36 @@ struct nl80211_wowlan_pattern_support {
  * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag)
  * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released
  *	(on devices that have rfkill in the device) (flag)
+ * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211: For wakeup reporting only, contains
+ *	the 802.11 packet that caused the wakeup, e.g. a deauth frame. The frame
+ *	may be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN
+ *	attribute contains the original length.
+ * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN: Original length of the 802.11
+ *	packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211
+ *	attribute if the packet was truncated somewhere.
+ * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023: For wakeup reporting only, contains the
+ *	802.11 packet that caused the wakeup, e.g. a magic packet. The frame may
+ *	be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN attribute
+ *	contains the original length.
+ * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN: Original length of the 802.3
+ *	packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023
+ *	attribute if the packet was truncated somewhere.
+ * @NL80211_WOWLAN_TRIG_TCP_CONNECTION: TCP connection wake, see DOC section
+ *	"TCP connection wakeup" for more details. This is a nested attribute
+ *	containing the exact information for establishing and keeping alive
+ *	the TCP connection.
+ * @NL80211_WOWLAN_TRIG_TCP_WAKEUP_MATCH: For wakeup reporting only, the
+ *	wakeup packet was received on the TCP connection
+ * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the
+ *	TCP connection was lost or failed to be established
+ * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS: For wakeup reporting only,
+ *	the TCP connection ran out of tokens to use for data to send to the
+ *	service
  * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
  * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
+ *
+ * These nested attributes are used to configure the wakeup triggers and
+ * to report the wakeup reason(s).
  */
 enum nl80211_wowlan_triggers {
 	__NL80211_WOWLAN_TRIG_INVALID,
@@ -2971,6 +3073,14 @@ enum nl80211_wowlan_triggers {
 	NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST,
 	NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE,
 	NL80211_WOWLAN_TRIG_RFKILL_RELEASE,
+	NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211,
+	NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN,
+	NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023,
+	NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN,
+	NL80211_WOWLAN_TRIG_TCP_CONNECTION,
+	NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH,
+	NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST,
+	NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS,
 
 	/* keep last */
 	NUM_NL80211_WOWLAN_TRIG,
@@ -2978,6 +3088,116 @@ enum nl80211_wowlan_triggers {
 };
 
 /**
+ * DOC: TCP connection wakeup
+ *
+ * Some devices can establish a TCP connection in order to be woken up by a
+ * packet coming in from outside their network segment, or behind NAT. If
+ * configured, the device will establish a TCP connection to the given
+ * service, and periodically send data to that service. The first data
+ * packet is usually transmitted after SYN/ACK, also ACKing the SYN/ACK.
+ * The data packets can optionally include a (little endian) sequence
+ * number (in the TCP payload!) that is generated by the device, and, also
+ * optionally, a token from a list of tokens. This serves as a keep-alive
+ * with the service, and for NATed connections, etc.
+ *
+ * During this keep-alive period, the server doesn't send any data to the
+ * client. When receiving data, it is compared against the wakeup pattern
+ * (and mask) and if it matches, the host is woken up. Similarly, if the
+ * connection breaks or cannot be established to start with, the host is
+ * also woken up.
+ *
+ * Developer's note: ARP offload is required for this, otherwise TCP
+ * response packets might not go through correctly.
+ */
+
+/**
+ * struct nl80211_wowlan_tcp_data_seq - WoWLAN TCP data sequence
+ * @start: starting value
+ * @offset: offset of sequence number in packet
+ * @len: length of the sequence value to write, 1 through 4
+ *
+ * Note: don't confuse with the TCP sequence number(s), this is for the
+ * keepalive packet payload. The actual value is written into the packet
+ * in little endian.
+ */
+struct nl80211_wowlan_tcp_data_seq {
+	__u32 start, offset, len;
+};
+
+/**
+ * struct nl80211_wowlan_tcp_data_token - WoWLAN TCP data token config
+ * @offset: offset of token in packet
+ * @len: length of each token
+ * @token_stream: stream of data to be used for the tokens, the length must
+ *	be a multiple of @len for this to make sense
+ */
+struct nl80211_wowlan_tcp_data_token {
+	__u32 offset, len;
+	__u8 token_stream[];
+};
+
+/**
+ * struct nl80211_wowlan_tcp_data_token_feature - data token features
+ * @min_len: minimum token length
+ * @max_len: maximum token length
+ * @bufsize: total available token buffer size (max size of @token_stream)
+ */
+struct nl80211_wowlan_tcp_data_token_feature {
+	__u32 min_len, max_len, bufsize;
+};
+
+/**
+ * enum nl80211_wowlan_tcp_attrs - WoWLAN TCP connection parameters
+ * @__NL80211_WOWLAN_TCP_INVALID: invalid number for nested attributes
+ * @NL80211_WOWLAN_TCP_SRC_IPV4: source IPv4 address (in network byte order)
+ * @NL80211_WOWLAN_TCP_DST_IPV4: destination IPv4 address
+ *	(in network byte order)
+ * @NL80211_WOWLAN_TCP_DST_MAC: destination MAC address, this is given because
+ *	route lookup when configured might be invalid by the time we suspend,
+ *	and doing a route lookup when suspending is no longer possible as it
+ *	might require ARP querying.
+ * @NL80211_WOWLAN_TCP_SRC_PORT: source port (u16); optional, if not given a
+ *	socket and port will be allocated
+ * @NL80211_WOWLAN_TCP_DST_PORT: destination port (u16)
+ * @NL80211_WOWLAN_TCP_DATA_PAYLOAD: data packet payload, at least one byte.
+ *	For feature advertising, a u32 attribute holding the maximum length
+ *	of the data payload.
+ * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ: data packet sequence configuration
+ *	(if desired), a &struct nl80211_wowlan_tcp_data_seq. For feature
+ *	advertising it is just a flag
+ * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN: data packet token configuration,
+ *	see &struct nl80211_wowlan_tcp_data_token and for advertising see
+ *	&struct nl80211_wowlan_tcp_data_token_feature.
+ * @NL80211_WOWLAN_TCP_DATA_INTERVAL: data interval in seconds, maximum
+ *	interval in feature advertising (u32)
+ * @NL80211_WOWLAN_TCP_WAKE_PAYLOAD: wake packet payload, for advertising a
+ *	u32 attribute holding the maximum length
+ * @NL80211_WOWLAN_TCP_WAKE_MASK: Wake packet payload mask, not used for
+ *	feature advertising. The mask works like @NL80211_WOWLAN_PKTPAT_MASK
+ *	but on the TCP payload only.
+ * @NUM_NL80211_WOWLAN_TCP: number of TCP attributes
+ * @MAX_NL80211_WOWLAN_TCP: highest attribute number
+ */
+enum nl80211_wowlan_tcp_attrs {
+	__NL80211_WOWLAN_TCP_INVALID,
+	NL80211_WOWLAN_TCP_SRC_IPV4,
+	NL80211_WOWLAN_TCP_DST_IPV4,
+	NL80211_WOWLAN_TCP_DST_MAC,
+	NL80211_WOWLAN_TCP_SRC_PORT,
+	NL80211_WOWLAN_TCP_DST_PORT,
+	NL80211_WOWLAN_TCP_DATA_PAYLOAD,
+	NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ,
+	NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN,
+	NL80211_WOWLAN_TCP_DATA_INTERVAL,
+	NL80211_WOWLAN_TCP_WAKE_PAYLOAD,
+	NL80211_WOWLAN_TCP_WAKE_MASK,
+
+	/* keep last */
+	NUM_NL80211_WOWLAN_TCP,
+	MAX_NL80211_WOWLAN_TCP = NUM_NL80211_WOWLAN_TCP - 1
+};
+
+/**
  * enum nl80211_iface_limit_attrs - limit attributes
  * @NL80211_IFACE_LIMIT_UNSPEC: (reserved)
  * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that
@@ -3234,6 +3454,8 @@ enum nl80211_ap_sme_features {
  *	Note that even for drivers that support this, the default is to add
  *	stations in authenticated/associated state, so to add unauthenticated
  *	stations the authenticated/associated bits have to be set in the mask.
+ * @NL80211_FEATURE_ADVERTISE_CHAN_LIMITS: cfg80211 advertises channel limits
+ *	(HT40, VHT 80/160 MHz) if this flag is set
  */
 enum nl80211_feature_flags {
 	NL80211_FEATURE_SK_TX_STATUS			= 1 << 0,
@@ -3249,7 +3471,9 @@ enum nl80211_feature_flags {
 	NL80211_FEATURE_NEED_OBSS_SCAN			= 1 << 10,
 	NL80211_FEATURE_P2P_GO_CTWIN			= 1 << 11,
 	NL80211_FEATURE_P2P_GO_OPPPS			= 1 << 12,
-	NL80211_FEATURE_FULL_AP_CLIENT_STATE		= 1 << 13,
+	/* bit 13 is reserved */
+	NL80211_FEATURE_ADVERTISE_CHAN_LIMITS		= 1 << 14,
+	NL80211_FEATURE_FULL_AP_CLIENT_STATE		= 1 << 15,
 };
 
 /**
@@ -3323,4 +3547,44 @@ enum nl80211_acl_policy {
 	NL80211_ACL_POLICY_DENY_UNLESS_LISTED,
 };
 
+/**
+ * enum nl80211_radar_event - type of radar event for DFS operation
+ *
+ * Type of event to be used with NL80211_ATTR_RADAR_EVENT to inform userspace
+ * about detected radars or success of the channel available check (CAC)
+ *
+ * @NL80211_RADAR_DETECTED: A radar pattern has been detected. The channel is
+ *	now unusable.
+ * @NL80211_RADAR_CAC_FINISHED: Channel Availability Check has been finished,
+ *	the channel is now available.
+ * @NL80211_RADAR_CAC_ABORTED: Channel Availability Check has been aborted, no
+ *	change to the channel status.
+ * @NL80211_RADAR_NOP_FINISHED: The Non-Occupancy Period for this channel is
+ *	over, channel becomes usable.
+ */
+enum nl80211_radar_event {
+	NL80211_RADAR_DETECTED,
+	NL80211_RADAR_CAC_FINISHED,
+	NL80211_RADAR_CAC_ABORTED,
+	NL80211_RADAR_NOP_FINISHED,
+};
+
+/**
+ * enum nl80211_dfs_state - DFS states for channels
+ *
+ * Channel states used by the DFS code.
+ *
+ * @IEEE80211_DFS_USABLE: The channel can be used, but channel availability
+ *	check (CAC) must be performed before using it for AP or IBSS.
+ * @IEEE80211_DFS_UNAVAILABLE: A radar has been detected on this channel, it
+ *	is therefore marked as not available.
+ * @IEEE80211_DFS_AVAILABLE: The channel has been CAC checked and is available.
+ */
+
+enum nl80211_dfs_state {
+	NL80211_DFS_USABLE,
+	NL80211_DFS_UNAVAILABLE,
+	NL80211_DFS_AVAILABLE,
+};
+
 #endif /* __LINUX_NL80211_H */