UAPI: (Scripted) Disintegrate include/linux

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>

379 files changed, 62312 insertions, 0 deletions

diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
index b0fd4d03499..e194387ef78 100644
--- a/include/uapi/linux/Kbuild
+++ b/include/uapi/linux/Kbuild
@@ -22,3 +22,396 @@ header-y += usb/
 header-y += wimax/
 
 genhdr-y += version.h
+
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/a.out.h \
+		  $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h),)
+header-y += a.out.h
+endif
+
+header-y += acct.h
+header-y += adb.h
+header-y += adfs_fs.h
+header-y += affs_hardblocks.h
+header-y += agpgart.h
+header-y += aio_abi.h
+header-y += apm_bios.h
+header-y += arcfb.h
+header-y += atalk.h
+header-y += atm.h
+header-y += atm_eni.h
+header-y += atm_he.h
+header-y += atm_idt77105.h
+header-y += atm_nicstar.h
+header-y += atm_tcp.h
+header-y += atm_zatm.h
+header-y += atmapi.h
+header-y += atmarp.h
+header-y += atmbr2684.h
+header-y += atmclip.h
+header-y += atmdev.h
+header-y += atmioc.h
+header-y += atmlec.h
+header-y += atmmpc.h
+header-y += atmppp.h
+header-y += atmsap.h
+header-y += atmsvc.h
+header-y += audit.h
+header-y += auto_fs.h
+header-y += auto_fs4.h
+header-y += auxvec.h
+header-y += ax25.h
+header-y += b1lli.h
+header-y += baycom.h
+header-y += bfs_fs.h
+header-y += binfmts.h
+header-y += blkpg.h
+header-y += blktrace_api.h
+header-y += bpqether.h
+header-y += bsg.h
+header-y += can.h
+header-y += capability.h
+header-y += capi.h
+header-y += cciss_defs.h
+header-y += cciss_ioctl.h
+header-y += cdrom.h
+header-y += cgroupstats.h
+header-y += chio.h
+header-y += cm4000_cs.h
+header-y += cn_proc.h
+header-y += coda.h
+header-y += coda_psdev.h
+header-y += coff.h
+header-y += connector.h
+header-y += const.h
+header-y += cramfs_fs.h
+header-y += cuda.h
+header-y += cyclades.h
+header-y += cycx_cfm.h
+header-y += dcbnl.h
+header-y += dccp.h
+header-y += dlm.h
+header-y += dlm_device.h
+header-y += dlm_netlink.h
+header-y += dlm_plock.h
+header-y += dlmconstants.h
+header-y += dm-ioctl.h
+header-y += dm-log-userspace.h
+header-y += dn.h
+header-y += dqblk_xfs.h
+header-y += edd.h
+header-y += efs_fs_sb.h
+header-y += elf-em.h
+header-y += elf-fdpic.h
+header-y += elf.h
+header-y += elfcore.h
+header-y += errno.h
+header-y += errqueue.h
+header-y += ethtool.h
+header-y += eventpoll.h
+header-y += fadvise.h
+header-y += falloc.h
+header-y += fanotify.h
+header-y += fb.h
+header-y += fcntl.h
+header-y += fd.h
+header-y += fdreg.h
+header-y += fib_rules.h
+header-y += fiemap.h
+header-y += filter.h
+header-y += firewire-cdev.h
+header-y += firewire-constants.h
+header-y += flat.h
+header-y += fs.h
+header-y += fsl_hypervisor.h
+header-y += fuse.h
+header-y += futex.h
+header-y += gameport.h
+header-y += gen_stats.h
+header-y += genetlink.h
+header-y += gfs2_ondisk.h
+header-y += gigaset_dev.h
+header-y += hdlc.h
+header-y += hdlcdrv.h
+header-y += hdreg.h
+header-y += hid.h
+header-y += hiddev.h
+header-y += hidraw.h
+header-y += hpet.h
+header-y += hysdn_if.h
+header-y += i2c-dev.h
+header-y += i2c.h
+header-y += i2o-dev.h
+header-y += i8k.h
+header-y += icmp.h
+header-y += icmpv6.h
+header-y += if.h
+header-y += if_addr.h
+header-y += if_addrlabel.h
+header-y += if_alg.h
+header-y += if_arcnet.h
+header-y += if_arp.h
+header-y += if_bonding.h
+header-y += if_bridge.h
+header-y += if_cablemodem.h
+header-y += if_eql.h
+header-y += if_ether.h
+header-y += if_fc.h
+header-y += if_fddi.h
+header-y += if_frad.h
+header-y += if_hippi.h
+header-y += if_infiniband.h
+header-y += if_link.h
+header-y += if_ltalk.h
+header-y += if_packet.h
+header-y += if_phonet.h
+header-y += if_plip.h
+header-y += if_ppp.h
+header-y += if_pppol2tp.h
+header-y += if_pppox.h
+header-y += if_slip.h
+header-y += if_team.h
+header-y += if_tun.h
+header-y += if_tunnel.h
+header-y += if_vlan.h
+header-y += if_x25.h
+header-y += igmp.h
+header-y += in.h
+header-y += in6.h
+header-y += in_route.h
+header-y += inet_diag.h
+header-y += inotify.h
+header-y += input.h
+header-y += ioctl.h
+header-y += ip.h
+header-y += ip6_tunnel.h
+header-y += ip_vs.h
+header-y += ipc.h
+header-y += ipmi.h
+header-y += ipmi_msgdefs.h
+header-y += ipsec.h
+header-y += ipv6.h
+header-y += ipv6_route.h
+header-y += ipx.h
+header-y += irda.h
+header-y += irqnr.h
+header-y += isdn.h
+header-y += isdn_divertif.h
+header-y += isdn_ppp.h
+header-y += isdnif.h
+header-y += iso_fs.h
+header-y += ivtv.h
+header-y += ivtvfb.h
+header-y += ixjuser.h
+header-y += jffs2.h
+header-y += joystick.h
+header-y += kd.h
+header-y += kdev_t.h
+header-y += kernel-page-flags.h
+header-y += kernel.h
+header-y += kernelcapi.h
+header-y += kexec.h
+header-y += keyboard.h
+header-y += keyctl.h
+
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm.h \
+		  $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h),)
+header-y += kvm.h
+endif
+
+
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm_para.h \
+		  $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h),)
+header-y += kvm_para.h
+endif
+
+header-y += l2tp.h
+header-y += limits.h
+header-y += llc.h
+header-y += loop.h
+header-y += lp.h
+header-y += magic.h
+header-y += major.h
+header-y += map_to_7segment.h
+header-y += matroxfb.h
+header-y += mdio.h
+header-y += media.h
+header-y += mei.h
+header-y += mempolicy.h
+header-y += meye.h
+header-y += mii.h
+header-y += minix_fs.h
+header-y += mman.h
+header-y += mmtimer.h
+header-y += mqueue.h
+header-y += mroute.h
+header-y += mroute6.h
+header-y += msdos_fs.h
+header-y += msg.h
+header-y += mtio.h
+header-y += n_r3964.h
+header-y += nbd.h
+header-y += ncp.h
+header-y += ncp_fs.h
+header-y += ncp_mount.h
+header-y += ncp_no.h
+header-y += neighbour.h
+header-y += net.h
+header-y += net_dropmon.h
+header-y += net_tstamp.h
+header-y += netdevice.h
+header-y += netfilter.h
+header-y += netfilter_arp.h
+header-y += netfilter_bridge.h
+header-y += netfilter_decnet.h
+header-y += netfilter_ipv4.h
+header-y += netfilter_ipv6.h
+header-y += netlink.h
+header-y += netrom.h
+header-y += nfc.h
+header-y += nfs.h
+header-y += nfs2.h
+header-y += nfs3.h
+header-y += nfs4.h
+header-y += nfs4_mount.h
+header-y += nfs_fs.h
+header-y += nfs_idmap.h
+header-y += nfs_mount.h
+header-y += nfsacl.h
+header-y += nl80211.h
+header-y += nubus.h
+header-y += nvram.h
+header-y += omap3isp.h
+header-y += omapfb.h
+header-y += oom.h
+header-y += packet_diag.h
+header-y += param.h
+header-y += parport.h
+header-y += patchkey.h
+header-y += pci.h
+header-y += pci_regs.h
+header-y += perf_event.h
+header-y += personality.h
+header-y += pfkeyv2.h
+header-y += pg.h
+header-y += phantom.h
+header-y += phonet.h
+header-y += pkt_cls.h
+header-y += pkt_sched.h
+header-y += pktcdvd.h
+header-y += pmu.h
+header-y += poll.h
+header-y += posix_types.h
+header-y += ppdev.h
+header-y += ppp-comp.h
+header-y += ppp-ioctl.h
+header-y += ppp_defs.h
+header-y += pps.h
+header-y += prctl.h
+header-y += ptp_clock.h
+header-y += ptrace.h
+header-y += qnx4_fs.h
+header-y += qnxtypes.h
+header-y += quota.h
+header-y += radeonfb.h
+header-y += random.h
+header-y += raw.h
+header-y += rds.h
+header-y += reboot.h
+header-y += reiserfs_fs.h
+header-y += reiserfs_xattr.h
+header-y += resource.h
+header-y += rfkill.h
+header-y += romfs_fs.h
+header-y += rose.h
+header-y += route.h
+header-y += rtc.h
+header-y += rtnetlink.h
+header-y += scc.h
+header-y += sched.h
+header-y += screen_info.h
+header-y += sdla.h
+header-y += seccomp.h
+header-y += securebits.h
+header-y += selinux_netlink.h
+header-y += sem.h
+header-y += serial.h
+header-y += serial_core.h
+header-y += serial_reg.h
+header-y += serio.h
+header-y += shm.h
+header-y += signal.h
+header-y += signalfd.h
+header-y += snmp.h
+header-y += sock_diag.h
+header-y += socket.h
+header-y += sockios.h
+header-y += som.h
+header-y += sonet.h
+header-y += sonypi.h
+header-y += sound.h
+header-y += soundcard.h
+header-y += stat.h
+header-y += stddef.h
+header-y += string.h
+header-y += suspend_ioctls.h
+header-y += swab.h
+header-y += synclink.h
+header-y += sysctl.h
+header-y += sysinfo.h
+header-y += taskstats.h
+header-y += tcp.h
+header-y += tcp_metrics.h
+header-y += telephony.h
+header-y += termios.h
+header-y += time.h
+header-y += times.h
+header-y += timex.h
+header-y += tiocl.h
+header-y += tipc.h
+header-y += tipc_config.h
+header-y += toshiba.h
+header-y += tty.h
+header-y += tty_flags.h
+header-y += types.h
+header-y += udf_fs_i.h
+header-y += udp.h
+header-y += uhid.h
+header-y += uinput.h
+header-y += uio.h
+header-y += ultrasound.h
+header-y += un.h
+header-y += unistd.h
+header-y += unix_diag.h
+header-y += usbdevice_fs.h
+header-y += utime.h
+header-y += utsname.h
+header-y += uuid.h
+header-y += uvcvideo.h
+header-y += v4l2-common.h
+header-y += v4l2-controls.h
+header-y += v4l2-dv-timings.h
+header-y += v4l2-mediabus.h
+header-y += v4l2-subdev.h
+header-y += veth.h
+header-y += vfio.h
+header-y += vhost.h
+header-y += videodev2.h
+header-y += virtio_9p.h
+header-y += virtio_balloon.h
+header-y += virtio_blk.h
+header-y += virtio_config.h
+header-y += virtio_console.h
+header-y += virtio_ids.h
+header-y += virtio_net.h
+header-y += virtio_pci.h
+header-y += virtio_ring.h
+header-y += virtio_rng.h
+header-y += vt.h
+header-y += wait.h
+header-y += wanrouter.h
+header-y += watchdog.h
+header-y += wimax.h
+header-y += wireless.h
+header-y += x25.h
+header-y += xattr.h
+header-y += xfrm.h
diff --git a/include/uapi/linux/a.out.h b/include/uapi/linux/a.out.h
new file mode 100644
index 00000000000..7caf44c7fa5
--- /dev/null
+++ b/include/uapi/linux/a.out.h
@@ -0,0 +1,274 @@
+#ifndef _UAPI__A_OUT_GNU_H__
+#define _UAPI__A_OUT_GNU_H__
+
+#define __GNU_EXEC_MACROS__
+
+#ifndef __STRUCT_EXEC_OVERRIDE__
+
+#include <asm/a.out.h>
+
+#endif /* __STRUCT_EXEC_OVERRIDE__ */
+
+#ifndef __ASSEMBLY__
+
+/* these go in the N_MACHTYPE field */
+enum machine_type {
+#if defined (M_OLDSUN2)
+  M__OLDSUN2 = M_OLDSUN2,
+#else
+  M_OLDSUN2 = 0,
+#endif
+#if defined (M_68010)
+  M__68010 = M_68010,
+#else
+  M_68010 = 1,
+#endif
+#if defined (M_68020)
+  M__68020 = M_68020,
+#else
+  M_68020 = 2,
+#endif
+#if defined (M_SPARC)
+  M__SPARC = M_SPARC,
+#else
+  M_SPARC = 3,
+#endif
+  /* skip a bunch so we don't run into any of sun's numbers */
+  M_386 = 100,
+  M_MIPS1 = 151,	/* MIPS R3000/R3000 binary */
+  M_MIPS2 = 152		/* MIPS R6000/R4000 binary */
+};
+
+#if !defined (N_MAGIC)
+#define N_MAGIC(exec) ((exec).a_info & 0xffff)
+#endif
+#define N_MACHTYPE(exec) ((enum machine_type)(((exec).a_info >> 16) & 0xff))
+#define N_FLAGS(exec) (((exec).a_info >> 24) & 0xff)
+#define N_SET_INFO(exec, magic, type, flags) \
+	((exec).a_info = ((magic) & 0xffff) \
+	 | (((int)(type) & 0xff) << 16) \
+	 | (((flags) & 0xff) << 24))
+#define N_SET_MAGIC(exec, magic) \
+	((exec).a_info = (((exec).a_info & 0xffff0000) | ((magic) & 0xffff)))
+
+#define N_SET_MACHTYPE(exec, machtype) \
+	((exec).a_info = \
+	 ((exec).a_info&0xff00ffff) | ((((int)(machtype))&0xff) << 16))
+
+#define N_SET_FLAGS(exec, flags) \
+	((exec).a_info = \
+	 ((exec).a_info&0x00ffffff) | (((flags) & 0xff) << 24))
+
+/* Code indicating object file or impure executable.  */
+#define OMAGIC 0407
+/* Code indicating pure executable.  */
+#define NMAGIC 0410
+/* Code indicating demand-paged executable.  */
+#define ZMAGIC 0413
+/* This indicates a demand-paged executable with the header in the text. 
+   The first page is unmapped to help trap NULL pointer references */
+#define QMAGIC 0314
+
+/* Code indicating core file.  */
+#define CMAGIC 0421
+
+#if !defined (N_BADMAG)
+#define N_BADMAG(x)	  (N_MAGIC(x) != OMAGIC		\
+			&& N_MAGIC(x) != NMAGIC		\
+  			&& N_MAGIC(x) != ZMAGIC \
+		        && N_MAGIC(x) != QMAGIC)
+#endif
+
+#define _N_HDROFF(x) (1024 - sizeof (struct exec))
+
+#if !defined (N_TXTOFF)
+#define N_TXTOFF(x) \
+ (N_MAGIC(x) == ZMAGIC ? _N_HDROFF((x)) + sizeof (struct exec) : \
+  (N_MAGIC(x) == QMAGIC ? 0 : sizeof (struct exec)))
+#endif
+
+#if !defined (N_DATOFF)
+#define N_DATOFF(x) (N_TXTOFF(x) + (x).a_text)
+#endif
+
+#if !defined (N_TRELOFF)
+#define N_TRELOFF(x) (N_DATOFF(x) + (x).a_data)
+#endif
+
+#if !defined (N_DRELOFF)
+#define N_DRELOFF(x) (N_TRELOFF(x) + N_TRSIZE(x))
+#endif
+
+#if !defined (N_SYMOFF)
+#define N_SYMOFF(x) (N_DRELOFF(x) + N_DRSIZE(x))
+#endif
+
+#if !defined (N_STROFF)
+#define N_STROFF(x) (N_SYMOFF(x) + N_SYMSIZE(x))
+#endif
+
+/* Address of text segment in memory after it is loaded.  */
+#if !defined (N_TXTADDR)
+#define N_TXTADDR(x) (N_MAGIC(x) == QMAGIC ? PAGE_SIZE : 0)
+#endif
+
+/* Address of data segment in memory after it is loaded.
+   Note that it is up to you to define SEGMENT_SIZE
+   on machines not listed here.  */
+#if defined(vax) || defined(hp300) || defined(pyr)
+#define SEGMENT_SIZE page_size
+#endif
+#ifdef	sony
+#define	SEGMENT_SIZE	0x2000
+#endif	/* Sony.  */
+#ifdef is68k
+#define SEGMENT_SIZE 0x20000
+#endif
+#if defined(m68k) && defined(PORTAR)
+#define PAGE_SIZE 0x400
+#define SEGMENT_SIZE PAGE_SIZE
+#endif
+
+#ifdef linux
+#ifndef __KERNEL__
+#include <unistd.h>
+#endif
+#if defined(__i386__) || defined(__mc68000__)
+#define SEGMENT_SIZE	1024
+#else
+#ifndef SEGMENT_SIZE
+#ifndef __KERNEL__
+#define SEGMENT_SIZE   getpagesize()
+#endif
+#endif
+#endif
+#endif
+
+#define _N_SEGMENT_ROUND(x) ALIGN(x, SEGMENT_SIZE)
+
+#define _N_TXTENDADDR(x) (N_TXTADDR(x)+(x).a_text)
+
+#ifndef N_DATADDR
+#define N_DATADDR(x) \
+    (N_MAGIC(x)==OMAGIC? (_N_TXTENDADDR(x)) \
+     : (_N_SEGMENT_ROUND (_N_TXTENDADDR(x))))
+#endif
+
+/* Address of bss segment in memory after it is loaded.  */
+#if !defined (N_BSSADDR)
+#define N_BSSADDR(x) (N_DATADDR(x) + (x).a_data)
+#endif
+
+#if !defined (N_NLIST_DECLARED)
+struct nlist {
+  union {
+    char *n_name;
+    struct nlist *n_next;
+    long n_strx;
+  } n_un;
+  unsigned char n_type;
+  char n_other;
+  short n_desc;
+  unsigned long n_value;
+};
+#endif /* no N_NLIST_DECLARED.  */
+
+#if !defined (N_UNDF)
+#define N_UNDF 0
+#endif
+#if !defined (N_ABS)
+#define N_ABS 2
+#endif
+#if !defined (N_TEXT)
+#define N_TEXT 4
+#endif
+#if !defined (N_DATA)
+#define N_DATA 6
+#endif
+#if !defined (N_BSS)
+#define N_BSS 8
+#endif
+#if !defined (N_FN)
+#define N_FN 15
+#endif
+
+#if !defined (N_EXT)
+#define N_EXT 1
+#endif
+#if !defined (N_TYPE)
+#define N_TYPE 036
+#endif
+#if !defined (N_STAB)
+#define N_STAB 0340
+#endif
+
+/* The following type indicates the definition of a symbol as being
+   an indirect reference to another symbol.  The other symbol
+   appears as an undefined reference, immediately following this symbol.
+
+   Indirection is asymmetrical.  The other symbol's value will be used
+   to satisfy requests for the indirect symbol, but not vice versa.
+   If the other symbol does not have a definition, libraries will
+   be searched to find a definition.  */
+#define N_INDR 0xa
+
+/* The following symbols refer to set elements.
+   All the N_SET[ATDB] symbols with the same name form one set.
+   Space is allocated for the set in the text section, and each set
+   element's value is stored into one word of the space.
+   The first word of the space is the length of the set (number of elements).
+
+   The address of the set is made into an N_SETV symbol
+   whose name is the same as the name of the set.
+   This symbol acts like a N_DATA global symbol
+   in that it can satisfy undefined external references.  */
+
+/* These appear as input to LD, in a .o file.  */
+#define	N_SETA	0x14		/* Absolute set element symbol */
+#define	N_SETT	0x16		/* Text set element symbol */
+#define	N_SETD	0x18		/* Data set element symbol */
+#define	N_SETB	0x1A		/* Bss set element symbol */
+
+/* This is output from LD.  */
+#define N_SETV	0x1C		/* Pointer to set vector in data area.  */
+
+#if !defined (N_RELOCATION_INFO_DECLARED)
+/* This structure describes a single relocation to be performed.
+   The text-relocation section of the file is a vector of these structures,
+   all of which apply to the text section.
+   Likewise, the data-relocation section applies to the data section.  */
+
+struct relocation_info
+{
+  /* Address (within segment) to be relocated.  */
+  int r_address;
+  /* The meaning of r_symbolnum depends on r_extern.  */
+  unsigned int r_symbolnum:24;
+  /* Nonzero means value is a pc-relative offset
+     and it should be relocated for changes in its own address
+     as well as for changes in the symbol or section specified.  */
+  unsigned int r_pcrel:1;
+  /* Length (as exponent of 2) of the field to be relocated.
+     Thus, a value of 2 indicates 1<<2 bytes.  */
+  unsigned int r_length:2;
+  /* 1 => relocate with value of symbol.
+          r_symbolnum is the index of the symbol
+	  in file's the symbol table.
+     0 => relocate with the address of a segment.
+          r_symbolnum is N_TEXT, N_DATA, N_BSS or N_ABS
+	  (the N_EXT bit may be set also, but signifies nothing).  */
+  unsigned int r_extern:1;
+  /* Four bits that aren't used, but when writing an object file
+     it is desirable to clear them.  */
+#ifdef NS32K
+  unsigned r_bsr:1;
+  unsigned r_disp:1;
+  unsigned r_pad:2;
+#else
+  unsigned int r_pad:4;
+#endif
+};
+#endif /* no N_RELOCATION_INFO_DECLARED.  */
+
+#endif /*__ASSEMBLY__ */
+#endif /* _UAPI__A_OUT_GNU_H__ */
diff --git a/include/uapi/linux/acct.h b/include/uapi/linux/acct.h
new file mode 100644
index 00000000000..11b6ca3e087
--- /dev/null
+++ b/include/uapi/linux/acct.h
@@ -0,0 +1,122 @@
+/*
+ *  BSD Process Accounting for Linux - Definitions
+ *
+ *  Author: Marco van Wieringen (mvw@planets.elm.net)
+ *
+ *  This header file contains the definitions needed to implement
+ *  BSD-style process accounting. The kernel accounting code and all
+ *  user-level programs that try to do something useful with the
+ *  process accounting log must include this file.
+ *
+ *  Copyright (C) 1995 - 1997 Marco van Wieringen - ELM Consultancy B.V.
+ *
+ */
+
+#ifndef _UAPI_LINUX_ACCT_H
+#define _UAPI_LINUX_ACCT_H
+
+#include <linux/types.h>
+
+#include <asm/param.h>
+#include <asm/byteorder.h>
+
+/* 
+ *  comp_t is a 16-bit "floating" point number with a 3-bit base 8
+ *  exponent and a 13-bit fraction.
+ *  comp2_t is 24-bit with 5-bit base 2 exponent and 20 bit fraction
+ *  (leading 1 not stored).
+ *  See linux/kernel/acct.c for the specific encoding systems used.
+ */
+
+typedef __u16	comp_t;
+typedef __u32	comp2_t;
+
+/*
+ *   accounting file record
+ *
+ *   This structure contains all of the information written out to the
+ *   process accounting file whenever a process exits.
+ */
+
+#define ACCT_COMM	16
+
+struct acct
+{
+	char		ac_flag;		/* Flags */
+	char		ac_version;		/* Always set to ACCT_VERSION */
+	/* for binary compatibility back until 2.0 */
+	__u16		ac_uid16;		/* LSB of Real User ID */
+	__u16		ac_gid16;		/* LSB of Real Group ID */
+	__u16		ac_tty;			/* Control Terminal */
+	__u32		ac_btime;		/* Process Creation Time */
+	comp_t		ac_utime;		/* User Time */
+	comp_t		ac_stime;		/* System Time */
+	comp_t		ac_etime;		/* Elapsed Time */
+	comp_t		ac_mem;			/* Average Memory Usage */
+	comp_t		ac_io;			/* Chars Transferred */
+	comp_t		ac_rw;			/* Blocks Read or Written */
+	comp_t		ac_minflt;		/* Minor Pagefaults */
+	comp_t		ac_majflt;		/* Major Pagefaults */
+	comp_t		ac_swaps;		/* Number of Swaps */
+/* m68k had no padding here. */
+#if !defined(CONFIG_M68K) || !defined(__KERNEL__)
+	__u16		ac_ahz;			/* AHZ */
+#endif
+	__u32		ac_exitcode;		/* Exitcode */
+	char		ac_comm[ACCT_COMM + 1];	/* Command Name */
+	__u8		ac_etime_hi;		/* Elapsed Time MSB */
+	__u16		ac_etime_lo;		/* Elapsed Time LSB */
+	__u32		ac_uid;			/* Real User ID */
+	__u32		ac_gid;			/* Real Group ID */
+};
+
+struct acct_v3
+{
+	char		ac_flag;		/* Flags */
+	char		ac_version;		/* Always set to ACCT_VERSION */
+	__u16		ac_tty;			/* Control Terminal */
+	__u32		ac_exitcode;		/* Exitcode */
+	__u32		ac_uid;			/* Real User ID */
+	__u32		ac_gid;			/* Real Group ID */
+	__u32		ac_pid;			/* Process ID */
+	__u32		ac_ppid;		/* Parent Process ID */
+	__u32		ac_btime;		/* Process Creation Time */
+#ifdef __KERNEL__
+	__u32		ac_etime;		/* Elapsed Time */
+#else
+	float		ac_etime;		/* Elapsed Time */
+#endif
+	comp_t		ac_utime;		/* User Time */
+	comp_t		ac_stime;		/* System Time */
+	comp_t		ac_mem;			/* Average Memory Usage */
+	comp_t		ac_io;			/* Chars Transferred */
+	comp_t		ac_rw;			/* Blocks Read or Written */
+	comp_t		ac_minflt;		/* Minor Pagefaults */
+	comp_t		ac_majflt;		/* Major Pagefaults */
+	comp_t		ac_swaps;		/* Number of Swaps */
+	char		ac_comm[ACCT_COMM];	/* Command Name */
+};
+
+/*
+ *  accounting flags
+ */
+				/* bit set when the process ... */
+#define AFORK		0x01	/* ... executed fork, but did not exec */
+#define ASU		0x02	/* ... used super-user privileges */
+#define ACOMPAT		0x04	/* ... used compatibility mode (VAX only not used) */
+#define ACORE		0x08	/* ... dumped core */
+#define AXSIG		0x10	/* ... was killed by a signal */
+
+#ifdef __BIG_ENDIAN
+#define ACCT_BYTEORDER	0x80	/* accounting file is big endian */
+#else
+#define ACCT_BYTEORDER	0x00	/* accounting file is little endian */
+#endif
+
+#ifndef __KERNEL__
+#define ACCT_VERSION	2
+#define AHZ		(HZ)
+#endif	/* __KERNEL */
+
+
+#endif /* _UAPI_LINUX_ACCT_H */
diff --git a/include/uapi/linux/adb.h b/include/uapi/linux/adb.h
new file mode 100644
index 00000000000..0ea1075fc4a
--- /dev/null
+++ b/include/uapi/linux/adb.h
@@ -0,0 +1,44 @@
+/*
+ * Definitions for ADB (Apple Desktop Bus) support.
+ */
+#ifndef _UAPI__ADB_H
+#define _UAPI__ADB_H
+
+/* ADB commands */
+#define ADB_BUSRESET		0
+#define ADB_FLUSH(id)		(0x01 | ((id) << 4))
+#define ADB_WRITEREG(id, reg)	(0x08 | (reg) | ((id) << 4))
+#define ADB_READREG(id, reg)	(0x0C | (reg) | ((id) << 4))
+
+/* ADB default device IDs (upper 4 bits of ADB command byte) */
+#define ADB_DONGLE	1	/* "software execution control" devices */
+#define ADB_KEYBOARD	2
+#define ADB_MOUSE	3
+#define ADB_TABLET	4
+#define ADB_MODEM	5
+#define ADB_MISC	7	/* maybe a monitor */
+
+#define ADB_RET_OK	0
+#define ADB_RET_TIMEOUT	3
+
+/* The kind of ADB request. The controller may emulate some
+   or all of those CUDA/PMU packet kinds */
+#define ADB_PACKET	0
+#define CUDA_PACKET	1
+#define ERROR_PACKET	2
+#define TIMER_PACKET	3
+#define POWER_PACKET	4
+#define MACIIC_PACKET	5
+#define PMU_PACKET	6
+#define ADB_QUERY	7
+
+/* ADB queries */
+
+/* ADB_QUERY_GETDEVINFO
+ * Query ADB slot for device presence
+ * data[2] = id, rep[0] = orig addr, rep[1] = handler_id
+ */
+#define ADB_QUERY_GETDEVINFO	1
+
+
+#endif /* _UAPI__ADB_H */
diff --git a/include/uapi/linux/adfs_fs.h b/include/uapi/linux/adfs_fs.h
new file mode 100644
index 00000000000..a1bf43754dd
--- /dev/null
+++ b/include/uapi/linux/adfs_fs.h
@@ -0,0 +1,44 @@
+#ifndef _UAPI_ADFS_FS_H
+#define _UAPI_ADFS_FS_H
+
+#include <linux/types.h>
+#include <linux/magic.h>
+
+/*
+ * Disc Record at disc address 0xc00
+ */
+struct adfs_discrecord {
+    __u8  log2secsize;
+    __u8  secspertrack;
+    __u8  heads;
+    __u8  density;
+    __u8  idlen;
+    __u8  log2bpmb;
+    __u8  skew;
+    __u8  bootoption;
+    __u8  lowsector;
+    __u8  nzones;
+    __le16 zone_spare;
+    __le32 root;
+    __le32 disc_size;
+    __le16 disc_id;
+    __u8  disc_name[10];
+    __le32 disc_type;
+    __le32 disc_size_high;
+    __u8  log2sharesize:4;
+    __u8  unused40:4;
+    __u8  big_flag:1;
+    __u8  unused41:1;
+    __u8  nzones_high;
+    __le32 format_version;
+    __le32 root_size;
+    __u8  unused52[60 - 52];
+};
+
+#define ADFS_DISCRECORD		(0xc00)
+#define ADFS_DR_OFFSET		(0x1c0)
+#define ADFS_DR_SIZE		 60
+#define ADFS_DR_SIZE_BITS	(ADFS_DR_SIZE << 3)
+
+
+#endif /* _UAPI_ADFS_FS_H */
diff --git a/include/uapi/linux/affs_hardblocks.h b/include/uapi/linux/affs_hardblocks.h
new file mode 100644
index 00000000000..f1b948c1f59
--- /dev/null
+++ b/include/uapi/linux/affs_hardblocks.h
@@ -0,0 +1,68 @@
+#ifndef	AFFS_HARDBLOCKS_H
+#define	AFFS_HARDBLOCKS_H
+
+#include <linux/types.h>
+
+/* Just the needed definitions for the RDB of an Amiga HD. */
+
+struct RigidDiskBlock {
+	__u32	rdb_ID;
+	__be32	rdb_SummedLongs;
+	__s32	rdb_ChkSum;
+	__u32	rdb_HostID;
+	__be32	rdb_BlockBytes;
+	__u32	rdb_Flags;
+	__u32	rdb_BadBlockList;
+	__be32	rdb_PartitionList;
+	__u32	rdb_FileSysHeaderList;
+	__u32	rdb_DriveInit;
+	__u32	rdb_Reserved1[6];
+	__u32	rdb_Cylinders;
+	__u32	rdb_Sectors;
+	__u32	rdb_Heads;
+	__u32	rdb_Interleave;
+	__u32	rdb_Park;
+	__u32	rdb_Reserved2[3];
+	__u32	rdb_WritePreComp;
+	__u32	rdb_ReducedWrite;
+	__u32	rdb_StepRate;
+	__u32	rdb_Reserved3[5];
+	__u32	rdb_RDBBlocksLo;
+	__u32	rdb_RDBBlocksHi;
+	__u32	rdb_LoCylinder;
+	__u32	rdb_HiCylinder;
+	__u32	rdb_CylBlocks;
+	__u32	rdb_AutoParkSeconds;
+	__u32	rdb_HighRDSKBlock;
+	__u32	rdb_Reserved4;
+	char	rdb_DiskVendor[8];
+	char	rdb_DiskProduct[16];
+	char	rdb_DiskRevision[4];
+	char	rdb_ControllerVendor[8];
+	char	rdb_ControllerProduct[16];
+	char	rdb_ControllerRevision[4];
+	__u32	rdb_Reserved5[10];
+};
+
+#define	IDNAME_RIGIDDISK	0x5244534B	/* "RDSK" */
+
+struct PartitionBlock {
+	__be32	pb_ID;
+	__be32	pb_SummedLongs;
+	__s32	pb_ChkSum;
+	__u32	pb_HostID;
+	__be32	pb_Next;
+	__u32	pb_Flags;
+	__u32	pb_Reserved1[2];
+	__u32	pb_DevFlags;
+	__u8	pb_DriveName[32];
+	__u32	pb_Reserved2[15];
+	__be32	pb_Environment[17];
+	__u32	pb_EReserved[15];
+};
+
+#define	IDNAME_PARTITION	0x50415254	/* "PART" */
+
+#define RDB_ALLOCATION_LIMIT	16
+
+#endif	/* AFFS_HARDBLOCKS_H */
diff --git a/include/uapi/linux/agpgart.h b/include/uapi/linux/agpgart.h
new file mode 100644
index 00000000000..4e828cf487b
--- /dev/null
+++ b/include/uapi/linux/agpgart.h
@@ -0,0 +1,113 @@
+/*
+ * AGPGART module version 0.99
+ * Copyright (C) 1999 Jeff Hartmann
+ * Copyright (C) 1999 Precision Insight, Inc.
+ * Copyright (C) 1999 Xi Graphics, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * JEFF HARTMANN, OR ANY OTHER CONTRIBUTORS BE LIABLE FOR ANY CLAIM, 
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR 
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE 
+ * OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#ifndef _UAPI_AGP_H
+#define _UAPI_AGP_H
+
+#define AGPIOC_BASE       'A'
+#define AGPIOC_INFO       _IOR (AGPIOC_BASE, 0, struct agp_info*)
+#define AGPIOC_ACQUIRE    _IO  (AGPIOC_BASE, 1)
+#define AGPIOC_RELEASE    _IO  (AGPIOC_BASE, 2)
+#define AGPIOC_SETUP      _IOW (AGPIOC_BASE, 3, struct agp_setup*)
+#define AGPIOC_RESERVE    _IOW (AGPIOC_BASE, 4, struct agp_region*)
+#define AGPIOC_PROTECT    _IOW (AGPIOC_BASE, 5, struct agp_region*)
+#define AGPIOC_ALLOCATE   _IOWR(AGPIOC_BASE, 6, struct agp_allocate*)
+#define AGPIOC_DEALLOCATE _IOW (AGPIOC_BASE, 7, int)
+#define AGPIOC_BIND       _IOW (AGPIOC_BASE, 8, struct agp_bind*)
+#define AGPIOC_UNBIND     _IOW (AGPIOC_BASE, 9, struct agp_unbind*)
+#define AGPIOC_CHIPSET_FLUSH _IO (AGPIOC_BASE, 10)
+
+#define AGP_DEVICE      "/dev/agpgart"
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#ifndef __KERNEL__
+#include <linux/types.h>
+
+struct agp_version {
+	__u16 major;
+	__u16 minor;
+};
+
+typedef struct _agp_info {
+	struct agp_version version;	/* version of the driver        */
+	__u32 bridge_id;	/* bridge vendor/device         */
+	__u32 agp_mode;		/* mode info of bridge          */
+	unsigned long aper_base;/* base of aperture             */
+	size_t aper_size;	/* size of aperture             */
+	size_t pg_total;	/* max pages (swap + system)    */
+	size_t pg_system;	/* max pages (system)           */
+	size_t pg_used;		/* current pages used           */
+} agp_info;
+
+typedef struct _agp_setup {
+	__u32 agp_mode;		/* mode info of bridge          */
+} agp_setup;
+
+/*
+ * The "prot" down below needs still a "sleep" flag somehow ...
+ */
+typedef struct _agp_segment {
+	__kernel_off_t pg_start;	/* starting page to populate    */
+	__kernel_size_t pg_count;	/* number of pages              */
+	int prot;			/* prot flags for mmap          */
+} agp_segment;
+
+typedef struct _agp_region {
+	__kernel_pid_t pid;		/* pid of process       */
+	__kernel_size_t seg_count;	/* number of segments   */
+	struct _agp_segment *seg_list;
+} agp_region;
+
+typedef struct _agp_allocate {
+	int key;		/* tag of allocation            */
+	__kernel_size_t pg_count;/* number of pages             */
+	__u32 type;		/* 0 == normal, other devspec   */
+   	__u32 physical;         /* device specific (some devices  
+				 * need a phys address of the     
+				 * actual page behind the gatt    
+				 * table)                        */
+} agp_allocate;
+
+typedef struct _agp_bind {
+	int key;		/* tag of allocation            */
+	__kernel_off_t pg_start;/* starting page to populate    */
+} agp_bind;
+
+typedef struct _agp_unbind {
+	int key;		/* tag of allocation            */
+	__u32 priority;		/* priority for paging out      */
+} agp_unbind;
+
+#endif				/* __KERNEL__ */
+
+#endif /* _UAPI_AGP_H */
diff --git a/include/uapi/linux/aio_abi.h b/include/uapi/linux/aio_abi.h
new file mode 100644
index 00000000000..86fa7a71336
--- /dev/null
+++ b/include/uapi/linux/aio_abi.h
@@ -0,0 +1,111 @@
+/* include/linux/aio_abi.h
+ *
+ * Copyright 2000,2001,2002 Red Hat.
+ *
+ * Written by Benjamin LaHaise <bcrl@kvack.org>
+ *
+ * Distribute under the terms of the GPLv2 (see ../../COPYING) or under 
+ * the following terms.
+ *
+ * Permission to use, copy, modify, and distribute this software and its
+ * documentation is hereby granted, provided that the above copyright
+ * notice appears in all copies.  This software is provided without any
+ * warranty, express or implied.  Red Hat makes no representations about
+ * the suitability of this software for any purpose.
+ *
+ * IN NO EVENT SHALL RED HAT BE LIABLE TO ANY PARTY FOR DIRECT, INDIRECT,
+ * SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF
+ * THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF RED HAT HAS BEEN ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * RED HAT DISCLAIMS ANY WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS ON AN "AS IS" BASIS, AND
+ * RED HAT HAS NO OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES,
+ * ENHANCEMENTS, OR MODIFICATIONS.
+ */
+#ifndef __LINUX__AIO_ABI_H
+#define __LINUX__AIO_ABI_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+typedef __kernel_ulong_t aio_context_t;
+
+enum {
+	IOCB_CMD_PREAD = 0,
+	IOCB_CMD_PWRITE = 1,
+	IOCB_CMD_FSYNC = 2,
+	IOCB_CMD_FDSYNC = 3,
+	/* These two are experimental.
+	 * IOCB_CMD_PREADX = 4,
+	 * IOCB_CMD_POLL = 5,
+	 */
+	IOCB_CMD_NOOP = 6,
+	IOCB_CMD_PREADV = 7,
+	IOCB_CMD_PWRITEV = 8,
+};
+
+/*
+ * Valid flags for the "aio_flags" member of the "struct iocb".
+ *
+ * IOCB_FLAG_RESFD - Set if the "aio_resfd" member of the "struct iocb"
+ *                   is valid.
+ */
+#define IOCB_FLAG_RESFD		(1 << 0)
+
+/* read() from /dev/aio returns these structures. */
+struct io_event {
+	__u64		data;		/* the data field from the iocb */
+	__u64		obj;		/* what iocb this event came from */
+	__s64		res;		/* result code for this event */
+	__s64		res2;		/* secondary result */
+};
+
+#if defined(__LITTLE_ENDIAN)
+#define PADDED(x,y)	x, y
+#elif defined(__BIG_ENDIAN)
+#define PADDED(x,y)	y, x
+#else
+#error edit for your odd byteorder.
+#endif
+
+/*
+ * we always use a 64bit off_t when communicating
+ * with userland.  its up to libraries to do the
+ * proper padding and aio_error abstraction
+ */
+
+struct iocb {
+	/* these are internal to the kernel/libc. */
+	__u64	aio_data;	/* data to be returned in event's data */
+	__u32	PADDED(aio_key, aio_reserved1);
+				/* the kernel sets aio_key to the req # */
+
+	/* common fields */
+	__u16	aio_lio_opcode;	/* see IOCB_CMD_ above */
+	__s16	aio_reqprio;
+	__u32	aio_fildes;
+
+	__u64	aio_buf;
+	__u64	aio_nbytes;
+	__s64	aio_offset;
+
+	/* extra parameters */
+	__u64	aio_reserved2;	/* TODO: use this for a (struct sigevent *) */
+
+	/* flags for the "struct iocb" */
+	__u32	aio_flags;
+
+	/*
+	 * if the IOCB_FLAG_RESFD flag of "aio_flags" is set, this is an
+	 * eventfd to signal AIO readiness to
+	 */
+	__u32	aio_resfd;
+}; /* 64 bytes */
+
+#undef IFBIG
+#undef IFLITTLE
+
+#endif /* __LINUX__AIO_ABI_H */
+
diff --git a/include/uapi/linux/apm_bios.h b/include/uapi/linux/apm_bios.h
new file mode 100644
index 00000000000..724f409adae
--- /dev/null
+++ b/include/uapi/linux/apm_bios.h
@@ -0,0 +1,135 @@
+/*
+ * Include file for the interface to an APM BIOS
+ * Copyright 1994-2001 Stephen Rothwell (sfr@canb.auug.org.au)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+#ifndef _UAPI_LINUX_APM_H
+#define _UAPI_LINUX_APM_H
+
+
+#include <linux/types.h>
+
+typedef unsigned short	apm_event_t;
+typedef unsigned short	apm_eventinfo_t;
+
+struct apm_bios_info {
+	__u16	version;
+	__u16	cseg;
+	__u32	offset;
+	__u16	cseg_16;
+	__u16	dseg;
+	__u16	flags;
+	__u16	cseg_len;
+	__u16	cseg_16_len;
+	__u16	dseg_len;
+};
+
+
+/*
+ * Power states
+ */
+#define APM_STATE_READY		0x0000
+#define APM_STATE_STANDBY	0x0001
+#define APM_STATE_SUSPEND	0x0002
+#define APM_STATE_OFF		0x0003
+#define APM_STATE_BUSY		0x0004
+#define APM_STATE_REJECT	0x0005
+#define APM_STATE_OEM_SYS	0x0020
+#define APM_STATE_OEM_DEV	0x0040
+
+#define APM_STATE_DISABLE	0x0000
+#define APM_STATE_ENABLE	0x0001
+
+#define APM_STATE_DISENGAGE	0x0000
+#define APM_STATE_ENGAGE	0x0001
+
+/*
+ * Events (results of Get PM Event)
+ */
+#define APM_SYS_STANDBY		0x0001
+#define APM_SYS_SUSPEND		0x0002
+#define APM_NORMAL_RESUME	0x0003
+#define APM_CRITICAL_RESUME	0x0004
+#define APM_LOW_BATTERY		0x0005
+#define APM_POWER_STATUS_CHANGE	0x0006
+#define APM_UPDATE_TIME		0x0007
+#define APM_CRITICAL_SUSPEND	0x0008
+#define APM_USER_STANDBY	0x0009
+#define APM_USER_SUSPEND	0x000a
+#define APM_STANDBY_RESUME	0x000b
+#define APM_CAPABILITY_CHANGE	0x000c
+
+/*
+ * Error codes
+ */
+#define APM_SUCCESS		0x00
+#define APM_DISABLED		0x01
+#define APM_CONNECTED		0x02
+#define APM_NOT_CONNECTED	0x03
+#define APM_16_CONNECTED	0x05
+#define APM_16_UNSUPPORTED	0x06
+#define APM_32_CONNECTED	0x07
+#define APM_32_UNSUPPORTED	0x08
+#define APM_BAD_DEVICE		0x09
+#define APM_BAD_PARAM		0x0a
+#define APM_NOT_ENGAGED		0x0b
+#define APM_BAD_FUNCTION	0x0c
+#define APM_RESUME_DISABLED	0x0d
+#define APM_NO_ERROR		0x53
+#define APM_BAD_STATE		0x60
+#define APM_NO_EVENTS		0x80
+#define APM_NOT_PRESENT		0x86
+
+/*
+ * APM Device IDs
+ */
+#define APM_DEVICE_BIOS		0x0000
+#define APM_DEVICE_ALL		0x0001
+#define APM_DEVICE_DISPLAY	0x0100
+#define APM_DEVICE_STORAGE	0x0200
+#define APM_DEVICE_PARALLEL	0x0300
+#define APM_DEVICE_SERIAL	0x0400
+#define APM_DEVICE_NETWORK	0x0500
+#define APM_DEVICE_PCMCIA	0x0600
+#define APM_DEVICE_BATTERY	0x8000
+#define APM_DEVICE_OEM		0xe000
+#define APM_DEVICE_OLD_ALL	0xffff
+#define APM_DEVICE_CLASS	0x00ff
+#define APM_DEVICE_MASK		0xff00
+
+
+/*
+ * Battery status
+ */
+#define APM_MAX_BATTERIES	2
+
+/*
+ * APM defined capability bit flags
+ */
+#define APM_CAP_GLOBAL_STANDBY		0x0001
+#define APM_CAP_GLOBAL_SUSPEND		0x0002
+#define APM_CAP_RESUME_STANDBY_TIMER	0x0004 /* Timer resume from standby */
+#define APM_CAP_RESUME_SUSPEND_TIMER	0x0008 /* Timer resume from suspend */
+#define APM_CAP_RESUME_STANDBY_RING	0x0010 /* Resume on Ring fr standby */
+#define APM_CAP_RESUME_SUSPEND_RING	0x0020 /* Resume on Ring fr suspend */
+#define APM_CAP_RESUME_STANDBY_PCMCIA	0x0040 /* Resume on PCMCIA Ring	*/
+#define APM_CAP_RESUME_SUSPEND_PCMCIA	0x0080 /* Resume on PCMCIA Ring	*/
+
+/*
+ * ioctl operations
+ */
+#include <linux/ioctl.h>
+
+#define APM_IOC_STANDBY		_IO('A', 1)
+#define APM_IOC_SUSPEND		_IO('A', 2)
+
+#endif /* _UAPI_LINUX_APM_H */
diff --git a/include/uapi/linux/arcfb.h b/include/uapi/linux/arcfb.h
new file mode 100644
index 00000000000..721e7654dae
--- /dev/null
+++ b/include/uapi/linux/arcfb.h
@@ -0,0 +1,8 @@
+#ifndef __LINUX_ARCFB_H__
+#define __LINUX_ARCFB_H__
+
+#define FBIO_WAITEVENT		_IO('F', 0x88)
+#define FBIO_GETCONTROL2	_IOR('F', 0x89, size_t)
+
+#endif
+
diff --git a/include/uapi/linux/atalk.h b/include/uapi/linux/atalk.h
new file mode 100644
index 00000000000..4bcd596e638
--- /dev/null
+++ b/include/uapi/linux/atalk.h
@@ -0,0 +1,44 @@
+#ifndef _UAPI__LINUX_ATALK_H__
+#define _UAPI__LINUX_ATALK_H__
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+#include <linux/socket.h>
+
+/*
+ * AppleTalk networking structures
+ *
+ * The following are directly referenced from the University Of Michigan
+ * netatalk for compatibility reasons.
+ */
+#define ATPORT_FIRST	1
+#define ATPORT_RESERVED	128
+#define ATPORT_LAST	254		/* 254 is only legal on localtalk */ 
+#define ATADDR_ANYNET	(__u16)0
+#define ATADDR_ANYNODE	(__u8)0
+#define ATADDR_ANYPORT  (__u8)0
+#define ATADDR_BCAST	(__u8)255
+#define DDP_MAXSZ	587
+#define DDP_MAXHOPS     15		/* 4 bits of hop counter */
+
+#define SIOCATALKDIFADDR       (SIOCPROTOPRIVATE + 0)
+
+struct atalk_addr {
+	__be16	s_net;
+	__u8	s_node;
+};
+
+struct sockaddr_at {
+	__kernel_sa_family_t sat_family;
+	__u8		  sat_port;
+	struct atalk_addr sat_addr;
+	char		  sat_zero[8];
+};
+
+struct atalk_netrange {
+	__u8	nr_phase;
+	__be16	nr_firstnet;
+	__be16	nr_lastnet;
+};
+
+#endif /* _UAPI__LINUX_ATALK_H__ */
diff --git a/include/uapi/linux/atm.h b/include/uapi/linux/atm.h
new file mode 100644
index 00000000000..88399db602a
--- /dev/null
+++ b/include/uapi/linux/atm.h
@@ -0,0 +1,241 @@
+/* atm.h - general ATM declarations */
+ 
+/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
+ 
+
+/*
+ * WARNING: User-space programs should not #include <linux/atm.h> directly.
+ *          Instead, #include <atm.h>
+ */
+
+#ifndef _UAPI_LINUX_ATM_H
+#define _UAPI_LINUX_ATM_H
+
+/*
+ * BEGIN_xx and END_xx markers are used for automatic generation of
+ * documentation. Do not change them.
+ */
+
+#include <linux/compiler.h>
+#include <linux/atmapi.h>
+#include <linux/atmsap.h>
+#include <linux/atmioc.h>
+#include <linux/types.h>
+
+
+/* general ATM constants */
+#define ATM_CELL_SIZE		    53	/* ATM cell size incl. header */
+#define ATM_CELL_PAYLOAD	    48	/* ATM payload size */
+#define ATM_AAL0_SDU		    52	/* AAL0 SDU size */
+#define ATM_MAX_AAL34_PDU	 65535	/* maximum AAL3/4 PDU payload */
+#define ATM_AAL5_TRAILER	     8	/* AAL5 trailer size */
+#define ATM_MAX_AAL5_PDU	 65535	/* maximum AAL5 PDU payload */
+#define ATM_MAX_CDV		  9999	/* maximum (default) CDV */
+#define ATM_NOT_RSV_VCI		    32	/* first non-reserved VCI value */
+
+#define ATM_MAX_VPI		   255	/* maximum VPI at the UNI */
+#define ATM_MAX_VPI_NNI		  4096	/* maximum VPI at the NNI */
+#define ATM_MAX_VCI		 65535	/* maximum VCI */
+
+
+/* "protcol" values for the socket system call */
+#define ATM_NO_AAL	0		/* AAL not specified */
+#define ATM_AAL0	13		/* "raw" ATM cells */
+#define ATM_AAL1	1		/* AAL1 (CBR) */
+#define ATM_AAL2	2		/* AAL2 (VBR) */
+#define ATM_AAL34	3		/* AAL3/4 (data) */
+#define ATM_AAL5	5		/* AAL5 (data) */
+
+/*
+ * socket option name coding functions
+ *
+ * Note that __SO_ENCODE and __SO_LEVEL are somewhat a hack since the
+ * << 22 only reserves 9 bits for the level.  On some architectures
+ * SOL_SOCKET is 0xFFFF, so that's a bit of a problem
+ */
+
+#define __SO_ENCODE(l,n,t)	((((l) & 0x1FF) << 22) | ((n) << 16) | \
+				sizeof(t))
+#define __SO_LEVEL_MATCH(c,m)	(((c) >> 22) == ((m) & 0x1FF))
+#define __SO_NUMBER(c)		(((c) >> 16) & 0x3f)
+#define __SO_SIZE(c)		((c) & 0x3fff)
+
+/*
+ * ATM layer
+ */
+
+#define SO_SETCLP	__SO_ENCODE(SOL_ATM,0,int)
+			    /* set CLP bit value - TODO */
+#define SO_CIRANGE	__SO_ENCODE(SOL_ATM,1,struct atm_cirange)
+			    /* connection identifier range; socket must be
+			       bound or connected */
+#define SO_ATMQOS	__SO_ENCODE(SOL_ATM,2,struct atm_qos)
+			    /* Quality of Service setting */
+#define SO_ATMSAP	__SO_ENCODE(SOL_ATM,3,struct atm_sap)
+			    /* Service Access Point */
+#define SO_ATMPVC	__SO_ENCODE(SOL_ATM,4,struct sockaddr_atmpvc)
+			    /* "PVC" address (also for SVCs); get only */
+#define SO_MULTIPOINT	__SO_ENCODE(SOL_ATM, 5, int)
+			    /* make this vc a p2mp */
+
+
+/*
+ * Note @@@: since the socket layers don't really distinguish the control and
+ * the data plane but generally seems to be data plane-centric, any layer is
+ * about equally wrong for the SAP. If you have a better idea about this,
+ * please speak up ...
+ */
+
+
+/* ATM cell header (for AAL0) */
+
+/* BEGIN_CH */
+#define ATM_HDR_GFC_MASK	0xf0000000
+#define ATM_HDR_GFC_SHIFT	28
+#define ATM_HDR_VPI_MASK	0x0ff00000
+#define ATM_HDR_VPI_SHIFT	20
+#define ATM_HDR_VCI_MASK	0x000ffff0
+#define ATM_HDR_VCI_SHIFT	4
+#define ATM_HDR_PTI_MASK	0x0000000e
+#define ATM_HDR_PTI_SHIFT	1
+#define ATM_HDR_CLP		0x00000001
+/* END_CH */
+
+
+/* PTI codings */
+
+/* BEGIN_PTI */
+#define ATM_PTI_US0	0  /* user data cell, congestion not exp, SDU-type 0 */
+#define ATM_PTI_US1	1  /* user data cell, congestion not exp, SDU-type 1 */
+#define ATM_PTI_UCES0	2  /* user data cell, cong. experienced, SDU-type 0 */
+#define ATM_PTI_UCES1	3  /* user data cell, cong. experienced, SDU-type 1 */
+#define ATM_PTI_SEGF5	4  /* segment OAM F5 flow related cell */
+#define ATM_PTI_E2EF5	5  /* end-to-end OAM F5 flow related cell */
+#define ATM_PTI_RSV_RM	6  /* reserved for traffic control/resource mgmt */
+#define ATM_PTI_RSV	7  /* reserved */
+/* END_PTI */
+
+
+/*
+ * The following items should stay in linux/atm.h, which should be linked to
+ * netatm/atm.h
+ */
+
+/* Traffic description */
+
+#define ATM_NONE	0		/* no traffic */
+#define ATM_UBR		1
+#define ATM_CBR		2
+#define ATM_VBR		3
+#define ATM_ABR		4
+#define ATM_ANYCLASS	5		/* compatible with everything */
+
+#define ATM_MAX_PCR	-1		/* maximum available PCR */
+
+struct atm_trafprm {
+	unsigned char	traffic_class;	/* traffic class (ATM_UBR, ...) */
+	int		max_pcr;	/* maximum PCR in cells per second */
+	int		pcr;		/* desired PCR in cells per second */
+	int		min_pcr;	/* minimum PCR in cells per second */
+	int		max_cdv;	/* maximum CDV in microseconds */
+	int		max_sdu;	/* maximum SDU in bytes */
+        /* extra params for ABR */
+        unsigned int 	icr;         	/* Initial Cell Rate (24-bit) */
+        unsigned int	tbe;		/* Transient Buffer Exposure (24-bit) */ 
+        unsigned int 	frtt : 24;	/* Fixed Round Trip Time (24-bit) */
+        unsigned int 	rif  : 4;       /* Rate Increment Factor (4-bit) */
+        unsigned int 	rdf  : 4;       /* Rate Decrease Factor (4-bit) */
+        unsigned int nrm_pres  :1;      /* nrm present bit */
+        unsigned int trm_pres  :1;     	/* rm present bit */
+        unsigned int adtf_pres :1;     	/* adtf present bit */
+        unsigned int cdf_pres  :1;    	/* cdf present bit*/
+        unsigned int nrm       :3;     	/* Max # of Cells for each forward RM cell (3-bit) */
+        unsigned int trm       :3;    	/* Time between forward RM cells (3-bit) */    
+	unsigned int adtf      :10;     /* ACR Decrease Time Factor (10-bit) */
+	unsigned int cdf       :3;      /* Cutoff Decrease Factor (3-bit) */
+        unsigned int spare     :9;      /* spare bits */ 
+};
+
+struct atm_qos {
+	struct atm_trafprm txtp;	/* parameters in TX direction */
+	struct atm_trafprm rxtp __ATM_API_ALIGN;
+					/* parameters in RX direction */
+	unsigned char aal __ATM_API_ALIGN;
+};
+
+/* PVC addressing */
+
+#define ATM_ITF_ANY	-1		/* "magic" PVC address values */
+#define ATM_VPI_ANY	-1
+#define ATM_VCI_ANY	-1
+#define ATM_VPI_UNSPEC	-2
+#define ATM_VCI_UNSPEC	-2
+
+
+struct sockaddr_atmpvc {
+	unsigned short 	sap_family;	/* address family, AF_ATMPVC  */
+	struct {			/* PVC address */
+		short	itf;		/* ATM interface */
+		short	vpi;		/* VPI (only 8 bits at UNI) */
+		int	vci;		/* VCI (only 16 bits at UNI) */
+	} sap_addr __ATM_API_ALIGN;	/* PVC address */
+};
+
+/* SVC addressing */
+
+#define	ATM_ESA_LEN	20		/* ATM End System Address length */
+#define ATM_E164_LEN	12		/* maximum E.164 number length */
+
+#define ATM_AFI_DCC	0x39		/* DCC ATM Format */
+#define ATM_AFI_ICD	0x47		/* ICD ATM Format */
+#define ATM_AFI_E164	0x45		/* E.164 ATM Format */
+#define ATM_AFI_LOCAL	0x49		/* Local ATM Format */ 
+
+#define ATM_AFI_DCC_GROUP	0xBD	/* DCC ATM Group Format */
+#define ATM_AFI_ICD_GROUP	0xC5	/* ICD ATM Group Format */
+#define ATM_AFI_E164_GROUP	0xC3	/* E.164 ATM Group Format */
+#define ATM_AFI_LOCAL_GROUP	0xC7	/* Local ATM Group Format */
+
+#define ATM_LIJ_NONE	0		/* no leaf-initiated join */
+#define ATM_LIJ		1		/* request joining */
+#define ATM_LIJ_RPJ	2		/* set to root-prompted join */
+#define ATM_LIJ_NJ	3		/* set to network join */
+
+
+struct sockaddr_atmsvc {
+    unsigned short 	sas_family;	/* address family, AF_ATMSVC */
+    struct {				/* SVC address */
+        unsigned char	prv[ATM_ESA_LEN];/* private ATM address */
+        char		pub[ATM_E164_LEN+1]; /* public address (E.164) */
+    					/* unused addresses must be bzero'ed */
+	char		lij_type;	/* role in LIJ call; one of ATM_LIJ* */
+	__u32	lij_id;		/* LIJ call identifier */
+    } sas_addr __ATM_API_ALIGN;		/* SVC address */
+};
+
+
+static __inline__ int atmsvc_addr_in_use(struct sockaddr_atmsvc addr)
+{
+	return *addr.sas_addr.prv || *addr.sas_addr.pub;
+}
+
+
+static __inline__ int atmpvc_addr_in_use(struct sockaddr_atmpvc addr)
+{
+	return addr.sap_addr.itf || addr.sap_addr.vpi || addr.sap_addr.vci;
+}
+
+
+/*
+ * Some stuff for linux/sockios.h
+ */
+
+struct atmif_sioc {
+	int number;
+	int length;
+	void __user *arg;
+};
+
+
+typedef unsigned short atm_backend_t;
+#endif /* _UAPI_LINUX_ATM_H */
diff --git a/include/uapi/linux/atm_eni.h b/include/uapi/linux/atm_eni.h
new file mode 100644
index 00000000000..34f31797255
--- /dev/null
+++ b/include/uapi/linux/atm_eni.h
@@ -0,0 +1,23 @@
+/* atm_eni.h - Driver-specific declarations of the ENI driver (for use by
+	       driver-specific utilities) */
+
+/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
+
+
+#ifndef LINUX_ATM_ENI_H
+#define LINUX_ATM_ENI_H
+
+#include <linux/atmioc.h>
+
+
+struct eni_multipliers {
+	int tx,rx;	/* values are in percent and must be > 100 */
+};
+
+
+#define ENI_MEMDUMP     _IOW('a',ATMIOC_SARPRV,struct atmif_sioc)
+                                                /* printk memory map */
+#define ENI_SETMULT	_IOW('a',ATMIOC_SARPRV+7,struct atmif_sioc)
+						/* set buffer multipliers */
+
+#endif
diff --git a/include/uapi/linux/atm_he.h b/include/uapi/linux/atm_he.h
new file mode 100644
index 00000000000..2a7713b597c
--- /dev/null
+++ b/include/uapi/linux/atm_he.h
@@ -0,0 +1,20 @@
+/* atm_he.h */
+
+#ifndef LINUX_ATM_HE_H
+#define LINUX_ATM_HE_H
+
+#include <linux/atmioc.h>
+
+#define HE_GET_REG	_IOW('a', ATMIOC_SARPRV, struct atmif_sioc)
+
+#define HE_REGTYPE_PCI	1
+#define HE_REGTYPE_RCM	2
+#define HE_REGTYPE_TCM	3
+#define HE_REGTYPE_MBOX	4
+
+struct he_ioctl_reg {
+	unsigned addr, val;
+	char type;
+};
+
+#endif /* LINUX_ATM_HE_H */
diff --git a/include/uapi/linux/atm_idt77105.h b/include/uapi/linux/atm_idt77105.h
new file mode 100644
index 00000000000..8b724000aa5
--- /dev/null
+++ b/include/uapi/linux/atm_idt77105.h
@@ -0,0 +1,28 @@
+/* atm_idt77105.h - Driver-specific declarations of the IDT77105 driver (for
+ * use by driver-specific utilities) */
+
+/* Written 1999 by Greg Banks <gnb@linuxfan.com>. Copied from atm_suni.h. */
+
+
+#ifndef LINUX_ATM_IDT77105_H
+#define LINUX_ATM_IDT77105_H
+
+#include <linux/types.h>
+#include <linux/atmioc.h>
+#include <linux/atmdev.h>
+
+/*
+ * Structure for IDT77105_GETSTAT and IDT77105_GETSTATZ ioctls.
+ * Pointed to by `arg' in atmif_sioc.
+ */
+struct idt77105_stats {
+        __u32 symbol_errors;  /* wire symbol errors */
+        __u32 tx_cells;       /* cells transmitted */
+        __u32 rx_cells;       /* cells received */
+        __u32 rx_hec_errors;  /* Header Error Check errors on receive */
+};
+
+#define IDT77105_GETSTAT	_IOW('a',ATMIOC_PHYPRV+2,struct atmif_sioc)	/* get stats */
+#define IDT77105_GETSTATZ	_IOW('a',ATMIOC_PHYPRV+3,struct atmif_sioc)	/* get stats and zero */
+
+#endif
diff --git a/include/uapi/linux/atm_nicstar.h b/include/uapi/linux/atm_nicstar.h
new file mode 100644
index 00000000000..577b79f33e8
--- /dev/null
+++ b/include/uapi/linux/atm_nicstar.h
@@ -0,0 +1,53 @@
+/******************************************************************************
+ *
+ * atm_nicstar.h
+ *
+ * Driver-specific declarations for use by NICSTAR driver specific utils.
+ *
+ * Author: Rui Prior
+ *
+ * (C) INESC 1998
+ *
+ ******************************************************************************/
+
+
+#ifndef LINUX_ATM_NICSTAR_H
+#define LINUX_ATM_NICSTAR_H
+
+/* Note: non-kernel programs including this file must also include
+ * sys/types.h for struct timeval
+ */
+
+#include <linux/atmapi.h>
+#include <linux/atmioc.h>
+
+#define NS_GETPSTAT	_IOWR('a',ATMIOC_SARPRV+1,struct atmif_sioc)
+						/* get pool statistics */
+#define NS_SETBUFLEV	_IOW('a',ATMIOC_SARPRV+2,struct atmif_sioc)
+						/* set buffer level markers */
+#define NS_ADJBUFLEV	_IO('a',ATMIOC_SARPRV+3)
+						/* adjust buffer level */
+
+typedef struct buf_nr
+{
+   unsigned min;
+   unsigned init;
+   unsigned max;
+}buf_nr;
+
+
+typedef struct pool_levels
+{
+   int buftype;
+   int count;		/* (At least for now) only used in NS_GETPSTAT */
+   buf_nr level;
+} pool_levels;
+
+/* type must be one of the following: */
+#define NS_BUFTYPE_SMALL 1
+#define NS_BUFTYPE_LARGE 2
+#define NS_BUFTYPE_HUGE 3
+#define NS_BUFTYPE_IOVEC 4
+
+
+#endif /* LINUX_ATM_NICSTAR_H */
diff --git a/include/uapi/linux/atm_tcp.h b/include/uapi/linux/atm_tcp.h
new file mode 100644
index 00000000000..914e821da64
--- /dev/null
+++ b/include/uapi/linux/atm_tcp.h
@@ -0,0 +1,61 @@
+/* atm_tcp.h - Driver-specific declarations of the ATMTCP driver (for use by
+	       driver-specific utilities) */
+
+/* Written 1997-2000 by Werner Almesberger, EPFL LRC/ICA */
+
+
+#ifndef _UAPILINUX_ATM_TCP_H
+#define _UAPILINUX_ATM_TCP_H
+
+#include <linux/atmapi.h>
+#include <linux/atm.h>
+#include <linux/atmioc.h>
+#include <linux/types.h>
+
+
+/*
+ * All values in struct atmtcp_hdr are in network byte order
+ */
+
+struct atmtcp_hdr {
+	__u16	vpi;
+	__u16	vci;
+	__u32	length;		/* ... of data part */
+};
+
+/*
+ * All values in struct atmtcp_command are in host byte order
+ */
+
+#define ATMTCP_HDR_MAGIC	(~0)	/* this length indicates a command */
+#define ATMTCP_CTRL_OPEN	1	/* request/reply */
+#define ATMTCP_CTRL_CLOSE	2	/* request/reply */
+
+struct atmtcp_control {
+	struct atmtcp_hdr hdr;	/* must be first */
+	int type;		/* message type; both directions */
+	atm_kptr_t vcc;		/* both directions */
+	struct sockaddr_atmpvc addr; /* suggested value from kernel */
+	struct atm_qos	qos;	/* both directions */
+	int result;		/* to kernel only */
+} __ATM_API_ALIGN;
+
+/*
+ * Field usage:
+ * Messge type	dir.	hdr.v?i	type	addr	qos	vcc	result
+ * -----------  ----	------- ----	----	---	---	------
+ * OPEN		K->D	Y	Y	Y	Y	Y	0
+ * OPEN		D->K	-	Y	Y	Y	Y	Y
+ * CLOSE	K->D	-	-	Y	-	Y	0
+ * CLOSE	D->K	-	-	-	-	Y	Y
+ */
+
+#define SIOCSIFATMTCP	_IO('a',ATMIOC_ITF)	/* set ATMTCP mode */
+#define ATMTCP_CREATE	_IO('a',ATMIOC_ITF+14)	/* create persistent ATMTCP
+						   interface */
+#define ATMTCP_REMOVE	_IO('a',ATMIOC_ITF+15)	/* destroy persistent ATMTCP
+						   interface */
+
+
+
+#endif /* _UAPILINUX_ATM_TCP_H */
diff --git a/include/uapi/linux/atm_zatm.h b/include/uapi/linux/atm_zatm.h
new file mode 100644
index 00000000000..10f0fa29454
--- /dev/null
+++ b/include/uapi/linux/atm_zatm.h
@@ -0,0 +1,52 @@
+/* atm_zatm.h - Driver-specific declarations of the ZATM driver (for use by
+		driver-specific utilities) */
+
+/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */
+
+
+#ifndef LINUX_ATM_ZATM_H
+#define LINUX_ATM_ZATM_H
+
+/*
+ * Note: non-kernel programs including this file must also include
+ * sys/types.h for struct timeval
+ */
+
+#include <linux/atmapi.h>
+#include <linux/atmioc.h>
+
+#define ZATM_GETPOOL	_IOW('a',ATMIOC_SARPRV+1,struct atmif_sioc)
+						/* get pool statistics */
+#define ZATM_GETPOOLZ	_IOW('a',ATMIOC_SARPRV+2,struct atmif_sioc)
+						/* get statistics and zero */
+#define ZATM_SETPOOL	_IOW('a',ATMIOC_SARPRV+3,struct atmif_sioc)
+						/* set pool parameters */
+
+struct zatm_pool_info {
+	int ref_count;			/* free buffer pool usage counters */
+	int low_water,high_water;	/* refill parameters */
+	int rqa_count,rqu_count;	/* queue condition counters */
+	int offset,next_off;		/* alignment optimizations: offset */
+	int next_cnt,next_thres;	/* repetition counter and threshold */
+};
+
+struct zatm_pool_req {
+	int pool_num;			/* pool number */
+	struct zatm_pool_info info;	/* actual information */
+};
+
+struct zatm_t_hist {
+	struct timeval real;		/* real (wall-clock) time */
+	struct timeval expected;	/* expected real time */
+};
+
+
+#define ZATM_OAM_POOL		0	/* free buffer pool for OAM cells */
+#define ZATM_AAL0_POOL		1	/* free buffer pool for AAL0 cells */
+#define ZATM_AAL5_POOL_BASE	2	/* first AAL5 free buffer pool */
+#define ZATM_LAST_POOL	ZATM_AAL5_POOL_BASE+10 /* max. 64 kB */
+
+#define ZATM_TIMER_HISTORY_SIZE	16	/* number of timer adjustments to
+					   record; must be 2^n */
+
+#endif
diff --git a/include/uapi/linux/atmapi.h b/include/uapi/linux/atmapi.h
new file mode 100644
index 00000000000..8fe54d90d95
--- /dev/null
+++ b/include/uapi/linux/atmapi.h
@@ -0,0 +1,29 @@
+/* atmapi.h - ATM API user space/kernel compatibility */
+ 
+/* Written 1999,2000 by Werner Almesberger, EPFL ICA */
+ 
+
+#ifndef _LINUX_ATMAPI_H
+#define _LINUX_ATMAPI_H
+
+#if defined(__sparc__) || defined(__ia64__)
+/* such alignment is not required on 32 bit sparcs, but we can't
+   figure that we are on a sparc64 while compiling user-space programs. */
+#define __ATM_API_ALIGN	__attribute__((aligned(8)))
+#else
+#define __ATM_API_ALIGN
+#endif
+
+
+/*
+ * Opaque type for kernel pointers. Note that _ is never accessed. We need
+ * the struct in order hide the array, so that we can make simple assignments
+ * instead of being forced to use memcpy. It also improves error reporting for
+ * code that still assumes that we're passing unsigned longs.
+ *
+ * Convention: NULL pointers are passed as a field of all zeroes.
+ */
+ 
+typedef struct { unsigned char _[8]; } __ATM_API_ALIGN atm_kptr_t;
+
+#endif
diff --git a/include/uapi/linux/atmarp.h b/include/uapi/linux/atmarp.h
new file mode 100644
index 00000000000..231f4bdec73
--- /dev/null
+++ b/include/uapi/linux/atmarp.h
@@ -0,0 +1,41 @@
+/* atmarp.h - ATM ARP protocol and kernel-demon interface definitions */
+ 
+/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */
+ 
+
+#ifndef _LINUX_ATMARP_H
+#define _LINUX_ATMARP_H
+
+#include <linux/types.h>
+#include <linux/atmapi.h>
+#include <linux/atmioc.h>
+
+
+#define ATMARP_RETRY_DELAY 30		/* request next resolution or forget
+					   NAK after 30 sec - should go into
+					   atmclip.h */
+#define ATMARP_MAX_UNRES_PACKETS 5	/* queue that many packets while
+					   waiting for the resolver */
+
+
+#define ATMARPD_CTRL	_IO('a',ATMIOC_CLIP+1)	/* become atmarpd ctrl sock */
+#define ATMARP_MKIP	_IO('a',ATMIOC_CLIP+2)	/* attach socket to IP */
+#define ATMARP_SETENTRY	_IO('a',ATMIOC_CLIP+3)	/* fill or hide ARP entry */
+#define ATMARP_ENCAP	_IO('a',ATMIOC_CLIP+5)	/* change encapsulation */
+
+
+enum atmarp_ctrl_type {
+	act_invalid,		/* catch uninitialized structures */
+	act_need,		/* need address resolution */
+	act_up,			/* interface is coming up */
+	act_down,		/* interface is going down */
+	act_change		/* interface configuration has changed */
+};
+
+struct atmarp_ctrl {
+	enum atmarp_ctrl_type	type;	/* message type */
+	int			itf_num;/* interface number (if present) */
+	__be32			ip;	/* IP address (act_need only) */
+};
+
+#endif
diff --git a/include/uapi/linux/atmbr2684.h b/include/uapi/linux/atmbr2684.h
new file mode 100644
index 00000000000..fdb2629b618
--- /dev/null
+++ b/include/uapi/linux/atmbr2684.h
@@ -0,0 +1,117 @@
+#ifndef _LINUX_ATMBR2684_H
+#define _LINUX_ATMBR2684_H
+
+#include <linux/types.h>
+#include <linux/atm.h>
+#include <linux/if.h>		/* For IFNAMSIZ */
+
+/*
+ * Type of media we're bridging (ethernet, token ring, etc)  Currently only
+ * ethernet is supported
+ */
+#define BR2684_MEDIA_ETHERNET	(0)	/* 802.3 */
+#define BR2684_MEDIA_802_4	(1)	/* 802.4 */
+#define BR2684_MEDIA_TR		(2)	/* 802.5 - token ring */
+#define BR2684_MEDIA_FDDI	(3)
+#define BR2684_MEDIA_802_6	(4)	/* 802.6 */
+
+					/* used only at device creation:  */
+#define BR2684_FLAG_ROUTED	(1<<16)	/* payload is routed, not bridged */
+
+/*
+ * Is there FCS inbound on this VC?  This currently isn't supported.
+ */
+#define BR2684_FCSIN_NO		(0)
+#define BR2684_FCSIN_IGNORE	(1)
+#define BR2684_FCSIN_VERIFY	(2)
+
+/*
+ * Is there FCS outbound on this VC?  This currently isn't supported.
+ */
+#define BR2684_FCSOUT_NO	(0)
+#define BR2684_FCSOUT_SENDZERO	(1)
+#define BR2684_FCSOUT_GENERATE	(2)
+
+/*
+ * Does this VC include LLC encapsulation?
+ */
+#define BR2684_ENCAPS_VC	(0)	/* VC-mux */
+#define BR2684_ENCAPS_LLC	(1)
+#define BR2684_ENCAPS_AUTODETECT (2)	/* Unsuported */
+
+/*
+ * Is this VC bridged or routed?
+ */
+
+#define BR2684_PAYLOAD_ROUTED   (0)
+#define BR2684_PAYLOAD_BRIDGED  (1)
+
+/*
+ * This is for the ATM_NEWBACKENDIF call - these are like socket families:
+ * the first element of the structure is the backend number and the rest
+ * is per-backend specific
+ */
+struct atm_newif_br2684 {
+	atm_backend_t backend_num;	/* ATM_BACKEND_BR2684 */
+	int media;		/* BR2684_MEDIA_*, flags in upper bits */
+	char ifname[IFNAMSIZ];
+	int mtu;
+};
+
+/*
+ * This structure is used to specify a br2684 interface - either by a
+ * positive integer (returned by ATM_NEWBACKENDIF) or the interfaces name
+ */
+#define BR2684_FIND_BYNOTHING	(0)
+#define BR2684_FIND_BYNUM	(1)
+#define BR2684_FIND_BYIFNAME	(2)
+struct br2684_if_spec {
+	int method;		/* BR2684_FIND_* */
+	union {
+		char ifname[IFNAMSIZ];
+		int devnum;
+	} spec;
+};
+
+/*
+ * This is for the ATM_SETBACKEND call - these are like socket families:
+ * the first element of the structure is the backend number and the rest
+ * is per-backend specific
+ */
+struct atm_backend_br2684 {
+	atm_backend_t backend_num;	/* ATM_BACKEND_BR2684 */
+	struct br2684_if_spec ifspec;
+	int fcs_in;		/* BR2684_FCSIN_* */
+	int fcs_out;		/* BR2684_FCSOUT_* */
+	int fcs_auto;		/* 1: fcs_{in,out} disabled if no FCS rx'ed */
+	int encaps;		/* BR2684_ENCAPS_* */
+	int has_vpiid;		/* 1: use vpn_id - Unsupported */
+	__u8 vpn_id[7];
+	int send_padding;	/* unsupported */
+	int min_size;		/* we will pad smaller packets than this */
+};
+
+/*
+ * The BR2684_SETFILT ioctl is an experimental mechanism for folks
+ * terminating a large number of IP-only vcc's.  When netfilter allows
+ * efficient per-if in/out filters, this support will be removed
+ */
+struct br2684_filter {
+	__be32 prefix;		/* network byte order */
+	__be32 netmask;		/* 0 = disable filter */
+};
+
+struct br2684_filter_set {
+	struct br2684_if_spec ifspec;
+	struct br2684_filter filter;
+};
+
+enum br2684_payload {
+	p_routed = BR2684_PAYLOAD_ROUTED,
+	p_bridged = BR2684_PAYLOAD_BRIDGED,
+};
+
+#define BR2684_SETFILT	_IOW( 'a', ATMIOC_BACKEND + 0, \
+				struct br2684_filter_set)
+
+#endif /* _LINUX_ATMBR2684_H */
diff --git a/include/uapi/linux/atmclip.h b/include/uapi/linux/atmclip.h
new file mode 100644
index 00000000000..02c94c448dd
--- /dev/null
+++ b/include/uapi/linux/atmclip.h
@@ -0,0 +1,21 @@
+/* atmclip.h - Classical IP over ATM */
+ 
+/* Written 1995-1998 by Werner Almesberger, EPFL LRC/ICA */
+ 
+
+#ifndef LINUX_ATMCLIP_H
+#define LINUX_ATMCLIP_H
+
+#include <linux/sockios.h>
+#include <linux/atmioc.h>
+
+
+#define RFC1483LLC_LEN	8		/* LLC+OUI+PID = 8 */
+#define RFC1626_MTU	9180		/* RFC1626 default MTU */
+
+#define CLIP_DEFAULT_IDLETIMER 1200	/* 20 minutes, see RFC1755 */
+#define CLIP_CHECK_INTERVAL	 10	/* check every ten seconds */
+
+#define	SIOCMKCLIP	_IO('a',ATMIOC_CLIP)	/* create IP interface */
+
+#endif
diff --git a/include/uapi/linux/atmdev.h b/include/uapi/linux/atmdev.h
new file mode 100644
index 00000000000..93e0ec008ca
--- /dev/null
+++ b/include/uapi/linux/atmdev.h
@@ -0,0 +1,215 @@
+/* atmdev.h - ATM device driver declarations and various related items */
+ 
+/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
+ 
+
+#ifndef _UAPILINUX_ATMDEV_H
+#define _UAPILINUX_ATMDEV_H
+
+
+#include <linux/atmapi.h>
+#include <linux/atm.h>
+#include <linux/atmioc.h>
+
+
+#define ESI_LEN		6
+
+#define ATM_OC3_PCR	(155520000/270*260/8/53)
+			/* OC3 link rate:  155520000 bps
+			   SONET overhead: /270*260 (9 section, 1 path)
+			   bits per cell:  /8/53
+			   max cell rate:  353207.547 cells/sec */
+#define ATM_25_PCR	((25600000/8-8000)/54)
+			/* 25 Mbps ATM cell rate (59111) */
+#define ATM_OC12_PCR	(622080000/1080*1040/8/53)
+			/* OC12 link rate: 622080000 bps
+			   SONET overhead: /1080*1040
+			   bits per cell:  /8/53
+			   max cell rate:  1412830.188 cells/sec */
+#define ATM_DS3_PCR	(8000*12)
+			/* DS3: 12 cells in a 125 usec time slot */
+
+
+#define __AAL_STAT_ITEMS \
+    __HANDLE_ITEM(tx);			/* TX okay */ \
+    __HANDLE_ITEM(tx_err);		/* TX errors */ \
+    __HANDLE_ITEM(rx);			/* RX okay */ \
+    __HANDLE_ITEM(rx_err);		/* RX errors */ \
+    __HANDLE_ITEM(rx_drop);		/* RX out of memory */
+
+struct atm_aal_stats {
+#define __HANDLE_ITEM(i) int i
+	__AAL_STAT_ITEMS
+#undef __HANDLE_ITEM
+};
+
+
+struct atm_dev_stats {
+	struct atm_aal_stats aal0;
+	struct atm_aal_stats aal34;
+	struct atm_aal_stats aal5;
+} __ATM_API_ALIGN;
+
+
+#define ATM_GETLINKRATE	_IOW('a',ATMIOC_ITF+1,struct atmif_sioc)
+					/* get link rate */
+#define ATM_GETNAMES	_IOW('a',ATMIOC_ITF+3,struct atm_iobuf)
+					/* get interface names (numbers) */
+#define ATM_GETTYPE	_IOW('a',ATMIOC_ITF+4,struct atmif_sioc)
+					/* get interface type name */
+#define ATM_GETESI	_IOW('a',ATMIOC_ITF+5,struct atmif_sioc)
+					/* get interface ESI */
+#define ATM_GETADDR	_IOW('a',ATMIOC_ITF+6,struct atmif_sioc)
+					/* get itf's local ATM addr. list */
+#define ATM_RSTADDR	_IOW('a',ATMIOC_ITF+7,struct atmif_sioc)
+					/* reset itf's ATM address list */
+#define ATM_ADDADDR	_IOW('a',ATMIOC_ITF+8,struct atmif_sioc)
+					/* add a local ATM address */
+#define ATM_DELADDR	_IOW('a',ATMIOC_ITF+9,struct atmif_sioc)
+					/* remove a local ATM address */
+#define ATM_GETCIRANGE	_IOW('a',ATMIOC_ITF+10,struct atmif_sioc)
+					/* get connection identifier range */
+#define ATM_SETCIRANGE	_IOW('a',ATMIOC_ITF+11,struct atmif_sioc)
+					/* set connection identifier range */
+#define ATM_SETESI	_IOW('a',ATMIOC_ITF+12,struct atmif_sioc)
+					/* set interface ESI */
+#define ATM_SETESIF	_IOW('a',ATMIOC_ITF+13,struct atmif_sioc)
+					/* force interface ESI */
+#define ATM_ADDLECSADDR	_IOW('a', ATMIOC_ITF+14, struct atmif_sioc)
+					/* register a LECS address */
+#define ATM_DELLECSADDR	_IOW('a', ATMIOC_ITF+15, struct atmif_sioc)
+					/* unregister a LECS address */
+#define ATM_GETLECSADDR	_IOW('a', ATMIOC_ITF+16, struct atmif_sioc)
+					/* retrieve LECS address(es) */
+
+#define ATM_GETSTAT	_IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc)
+					/* get AAL layer statistics */
+#define ATM_GETSTATZ	_IOW('a',ATMIOC_SARCOM+1,struct atmif_sioc)
+					/* get AAL layer statistics and zero */
+#define ATM_GETLOOP	_IOW('a',ATMIOC_SARCOM+2,struct atmif_sioc)
+					/* get loopback mode */
+#define ATM_SETLOOP	_IOW('a',ATMIOC_SARCOM+3,struct atmif_sioc)
+					/* set loopback mode */
+#define ATM_QUERYLOOP	_IOW('a',ATMIOC_SARCOM+4,struct atmif_sioc)
+					/* query supported loopback modes */
+#define ATM_SETSC	_IOW('a',ATMIOC_SPECIAL+1,int)
+					/* enable or disable single-copy */
+#define ATM_SETBACKEND	_IOW('a',ATMIOC_SPECIAL+2,atm_backend_t)
+					/* set backend handler */
+#define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t)
+					/* use backend to make new if */
+#define ATM_ADDPARTY  	_IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf)
+ 					/* add party to p2mp call */
+#ifdef CONFIG_COMPAT
+/* It actually takes struct sockaddr_atmsvc, not struct atm_iobuf */
+#define COMPAT_ATM_ADDPARTY  	_IOW('a', ATMIOC_SPECIAL+4,struct compat_atm_iobuf)
+#endif
+#define ATM_DROPPARTY 	_IOW('a', ATMIOC_SPECIAL+5,int)
+					/* drop party from p2mp call */
+
+/*
+ * These are backend handkers that can be set via the ATM_SETBACKEND call
+ * above.  In the future we may support dynamic loading of these - for now,
+ * they're just being used to share the ATMIOC_BACKEND ioctls
+ */
+#define ATM_BACKEND_RAW		0	
+#define ATM_BACKEND_PPP		1	/* PPPoATM - RFC2364 */
+#define ATM_BACKEND_BR2684	2	/* Bridged RFC1483/2684 */
+
+/* for ATM_GETTYPE */
+#define ATM_ITFTYP_LEN	8	/* maximum length of interface type name */
+
+/*
+ * Loopback modes for ATM_{PHY,SAR}_{GET,SET}LOOP
+ */
+
+/* Point of loopback				CPU-->SAR-->PHY-->line--> ... */
+#define __ATM_LM_NONE	0	/* no loop back     ^     ^     ^      ^      */
+#define __ATM_LM_AAL	1	/* loop back PDUs --'     |     |      |      */
+#define __ATM_LM_ATM	2	/* loop back ATM cells ---'     |      |      */
+/* RESERVED		4	loop back on PHY side  ---'		      */
+#define __ATM_LM_PHY	8	/* loop back bits (digital) ----'      |      */
+#define __ATM_LM_ANALOG 16	/* loop back the analog signal --------'      */
+
+/* Direction of loopback */
+#define __ATM_LM_MKLOC(n)	((n))	    /* Local (i.e. loop TX to RX) */
+#define __ATM_LM_MKRMT(n)	((n) << 8)  /* Remote (i.e. loop RX to TX) */
+
+#define __ATM_LM_XTLOC(n)	((n) & 0xff)
+#define __ATM_LM_XTRMT(n)	(((n) >> 8) & 0xff)
+
+#define ATM_LM_NONE	0	/* no loopback */
+
+#define ATM_LM_LOC_AAL	__ATM_LM_MKLOC(__ATM_LM_AAL)
+#define ATM_LM_LOC_ATM	__ATM_LM_MKLOC(__ATM_LM_ATM)
+#define ATM_LM_LOC_PHY	__ATM_LM_MKLOC(__ATM_LM_PHY)
+#define ATM_LM_LOC_ANALOG __ATM_LM_MKLOC(__ATM_LM_ANALOG)
+
+#define ATM_LM_RMT_AAL	__ATM_LM_MKRMT(__ATM_LM_AAL)
+#define ATM_LM_RMT_ATM	__ATM_LM_MKRMT(__ATM_LM_ATM)
+#define ATM_LM_RMT_PHY	__ATM_LM_MKRMT(__ATM_LM_PHY)
+#define ATM_LM_RMT_ANALOG __ATM_LM_MKRMT(__ATM_LM_ANALOG)
+
+/*
+ * Note: ATM_LM_LOC_* and ATM_LM_RMT_* can be combined, provided that
+ * __ATM_LM_XTLOC(x) <= __ATM_LM_XTRMT(x)
+ */
+
+
+struct atm_iobuf {
+	int length;
+	void __user *buffer;
+};
+
+/* for ATM_GETCIRANGE / ATM_SETCIRANGE */
+
+#define ATM_CI_MAX      -1              /* use maximum range of VPI/VCI */
+ 
+struct atm_cirange {
+	signed char	vpi_bits;	/* 1..8, ATM_CI_MAX (-1) for maximum */
+	signed char	vci_bits;	/* 1..16, ATM_CI_MAX (-1) for maximum */
+};
+
+/* for ATM_SETSC; actually taken from the ATM_VF number space */
+
+#define ATM_SC_RX	1024		/* enable RX single-copy */
+#define ATM_SC_TX	2048		/* enable TX single-copy */
+
+#define ATM_BACKLOG_DEFAULT 32 /* if we get more, we're likely to time out
+				  anyway */
+
+/* MF: change_qos (Modify) flags */
+
+#define ATM_MF_IMMED	 1	/* Block until change is effective */
+#define ATM_MF_INC_RSV	 2	/* Change reservation on increase */
+#define ATM_MF_INC_SHP	 4	/* Change shaping on increase */
+#define ATM_MF_DEC_RSV	 8	/* Change reservation on decrease */
+#define ATM_MF_DEC_SHP	16	/* Change shaping on decrease */
+#define ATM_MF_BWD	32	/* Set the backward direction parameters */
+
+#define ATM_MF_SET	(ATM_MF_INC_RSV | ATM_MF_INC_SHP | ATM_MF_DEC_RSV | \
+			  ATM_MF_DEC_SHP | ATM_MF_BWD)
+
+/*
+ * ATM_VS_* are used to express VC state in a human-friendly way.
+ */
+
+#define ATM_VS_IDLE	0	/* VC is not used */
+#define ATM_VS_CONNECTED 1	/* VC is connected */
+#define ATM_VS_CLOSING	2	/* VC is closing */
+#define ATM_VS_LISTEN	3	/* VC is listening for incoming setups */
+#define ATM_VS_INUSE	4	/* VC is in use (registered with atmsigd) */
+#define ATM_VS_BOUND	5	/* VC is bound */
+
+#define ATM_VS2TXT_MAP \
+    "IDLE", "CONNECTED", "CLOSING", "LISTEN", "INUSE", "BOUND"
+
+#define ATM_VF2TXT_MAP \
+    "ADDR",	"READY",	"PARTIAL",	"REGIS", \
+    "RELEASED", "HASQOS",	"LISTEN",	"META", \
+    "256",	"512",		"1024",		"2048", \
+    "SESSION",	"HASSAP",	"BOUND",	"CLOSE"
+
+
+
+#endif /* _UAPILINUX_ATMDEV_H */
diff --git a/include/uapi/linux/atmioc.h b/include/uapi/linux/atmioc.h
new file mode 100644
index 00000000000..37f67aa8f1c
--- /dev/null
+++ b/include/uapi/linux/atmioc.h
@@ -0,0 +1,41 @@
+/* atmioc.h - ranges for ATM-related ioctl numbers */
+ 
+/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */
+
+
+/*
+ * See http://icawww1.epfl.ch/linux-atm/magic.html for the complete list of
+ * "magic" ioctl numbers.
+ */
+
+
+#ifndef _LINUX_ATMIOC_H
+#define _LINUX_ATMIOC_H
+
+#include <asm/ioctl.h>
+		/* everybody including atmioc.h will also need _IO{,R,W,WR} */
+
+#define ATMIOC_PHYCOM	  0x00 /* PHY device common ioctls, globally unique */
+#define ATMIOC_PHYCOM_END 0x0f
+#define ATMIOC_PHYTYP	  0x10 /* PHY dev type ioctls, unique per PHY type */
+#define ATMIOC_PHYTYP_END 0x2f
+#define ATMIOC_PHYPRV	  0x30 /* PHY dev private ioctls, unique per driver */
+#define ATMIOC_PHYPRV_END 0x4f
+#define ATMIOC_SARCOM	  0x50 /* SAR device common ioctls, globally unique */
+#define ATMIOC_SARCOM_END 0x50
+#define ATMIOC_SARPRV	  0x60 /* SAR dev private ioctls, unique per driver */
+#define ATMIOC_SARPRV_END 0x7f
+#define ATMIOC_ITF	  0x80 /* Interface ioctls, globally unique */
+#define ATMIOC_ITF_END	  0x8f
+#define ATMIOC_BACKEND	  0x90 /* ATM generic backend ioctls, u. per backend */
+#define ATMIOC_BACKEND_END 0xaf
+/* 0xb0-0xbf: Reserved for future use */
+#define ATMIOC_AREQUIPA	  0xc0 /* Application requested IP over ATM, glob. u. */
+#define ATMIOC_LANE	  0xd0 /* LAN Emulation, globally unique */
+#define ATMIOC_MPOA       0xd8 /* MPOA, globally unique */
+#define	ATMIOC_CLIP	  0xe0 /* Classical IP over ATM control, globally u. */
+#define	ATMIOC_CLIP_END	  0xef
+#define	ATMIOC_SPECIAL	  0xf0 /* Special-purpose controls, globally unique */
+#define	ATMIOC_SPECIAL_END 0xff
+
+#endif
diff --git a/include/uapi/linux/atmlec.h b/include/uapi/linux/atmlec.h
new file mode 100644
index 00000000000..302791e3ab2
--- /dev/null
+++ b/include/uapi/linux/atmlec.h
@@ -0,0 +1,91 @@
+/*
+ * ATM Lan Emulation Daemon driver interface
+ *
+ * Marko Kiiskila <mkiiskila@yahoo.com>
+ */
+
+#ifndef _ATMLEC_H_
+#define _ATMLEC_H_
+
+#include <linux/atmapi.h>
+#include <linux/atmioc.h>
+#include <linux/atm.h>
+#include <linux/if_ether.h>
+#include <linux/types.h>
+
+/* ATM lec daemon control socket */
+#define ATMLEC_CTRL	_IO('a', ATMIOC_LANE)
+#define ATMLEC_DATA	_IO('a', ATMIOC_LANE+1)
+#define ATMLEC_MCAST	_IO('a', ATMIOC_LANE+2)
+
+/* Maximum number of LEC interfaces (tweakable) */
+#define MAX_LEC_ITF 48
+
+typedef enum {
+	l_set_mac_addr,
+	l_del_mac_addr,
+	l_svc_setup,
+	l_addr_delete,
+	l_topology_change,
+	l_flush_complete,
+	l_arp_update,
+	l_narp_req,		/* LANE2 mandates the use of this */
+	l_config,
+	l_flush_tran_id,
+	l_set_lecid,
+	l_arp_xmt,
+	l_rdesc_arp_xmt,
+	l_associate_req,
+	l_should_bridge		/* should we bridge this MAC? */
+} atmlec_msg_type;
+
+#define ATMLEC_MSG_TYPE_MAX l_should_bridge
+
+struct atmlec_config_msg {
+	unsigned int maximum_unknown_frame_count;
+	unsigned int max_unknown_frame_time;
+	unsigned short max_retry_count;
+	unsigned int aging_time;
+	unsigned int forward_delay_time;
+	unsigned int arp_response_time;
+	unsigned int flush_timeout;
+	unsigned int path_switching_delay;
+	unsigned int lane_version;	/* LANE2: 1 for LANEv1, 2 for LANEv2 */
+	int mtu;
+	int is_proxy;
+};
+
+struct atmlec_msg {
+	atmlec_msg_type type;
+	int sizeoftlvs;		/* LANE2: if != 0, tlvs follow */
+	union {
+		struct {
+			unsigned char mac_addr[ETH_ALEN];
+			unsigned char atm_addr[ATM_ESA_LEN];
+			unsigned int flag;	/*
+						 * Topology_change flag,
+						 * remoteflag, permanent flag,
+						 * lecid, transaction id
+						 */
+			unsigned int targetless_le_arp;	/* LANE2 */
+			unsigned int no_source_le_narp;	/* LANE2 */
+		} normal;
+		struct atmlec_config_msg config;
+		struct {
+			__u16 lec_id;				/* requestor lec_id  */
+			__u32 tran_id;				/* transaction id    */
+			unsigned char mac_addr[ETH_ALEN];	/* dst mac addr      */
+			unsigned char atm_addr[ATM_ESA_LEN];	/* reqestor ATM addr */
+		} proxy;	/*
+				 * For mapping LE_ARP requests to responses. Filled by
+				 * zeppelin, returned by kernel. Used only when proxying
+				 */
+	} content;
+} __ATM_API_ALIGN;
+
+struct atmlec_ioc {
+	int dev_num;
+	unsigned char atm_addr[ATM_ESA_LEN];
+	unsigned char receive;	/* 1= receive vcc, 0 = send vcc */
+};
+#endif /* _ATMLEC_H_ */
diff --git a/include/uapi/linux/atmmpc.h b/include/uapi/linux/atmmpc.h
new file mode 100644
index 00000000000..2aba5787fa6
--- /dev/null
+++ b/include/uapi/linux/atmmpc.h
@@ -0,0 +1,126 @@
+#ifndef _ATMMPC_H_
+#define _ATMMPC_H_
+
+#include <linux/atmapi.h>
+#include <linux/atmioc.h>
+#include <linux/atm.h>
+#include <linux/types.h>
+
+#define ATMMPC_CTRL _IO('a', ATMIOC_MPOA)
+#define ATMMPC_DATA _IO('a', ATMIOC_MPOA+1)
+
+#define MPC_SOCKET_INGRESS 1
+#define MPC_SOCKET_EGRESS  2
+
+struct atmmpc_ioc {
+        int dev_num;
+        __be32 ipaddr;              /* the IP address of the shortcut    */
+        int type;                     /* ingress or egress                 */
+};
+
+typedef struct in_ctrl_info {
+        __u8   Last_NHRP_CIE_code;
+        __u8   Last_Q2931_cause_value;
+        __u8   eg_MPC_ATM_addr[ATM_ESA_LEN];
+        __be32  tag;
+        __be32  in_dst_ip;      /* IP address this ingress MPC sends packets to */
+        __u16  holding_time;
+        __u32  request_id;
+} in_ctrl_info;
+
+typedef struct eg_ctrl_info {
+        __u8   DLL_header[256];
+        __u8   DH_length;
+        __be32  cache_id;
+        __be32  tag;
+        __be32  mps_ip;
+        __be32  eg_dst_ip;      /* IP address to which ingress MPC sends packets */
+        __u8   in_MPC_data_ATM_addr[ATM_ESA_LEN];
+        __u16  holding_time;
+} eg_ctrl_info;
+
+struct mpc_parameters {
+        __u16 mpc_p1;   /* Shortcut-Setup Frame Count    */
+        __u16 mpc_p2;   /* Shortcut-Setup Frame Time     */
+        __u8 mpc_p3[8]; /* Flow-detection Protocols      */
+        __u16 mpc_p4;   /* MPC Initial Retry Time        */
+        __u16 mpc_p5;   /* MPC Retry Time Maximum        */
+        __u16 mpc_p6;   /* Hold Down Time                */
+} ;
+
+struct k_message {
+        __u16 type;
+        __be32 ip_mask;
+        __u8  MPS_ctrl[ATM_ESA_LEN];
+        union {
+                in_ctrl_info in_info;
+                eg_ctrl_info eg_info;
+                struct mpc_parameters params;
+        } content;
+        struct atm_qos qos;       
+} __ATM_API_ALIGN;
+
+struct llc_snap_hdr {
+	/* RFC 1483 LLC/SNAP encapsulation for routed IP PDUs */
+        __u8  dsap;    /* Destination Service Access Point (0xAA)     */
+        __u8  ssap;    /* Source Service Access Point      (0xAA)     */
+        __u8  ui;      /* Unnumbered Information           (0x03)     */
+        __u8  org[3];  /* Organizational identification    (0x000000) */
+        __u8  type[2]; /* Ether type (for IP)              (0x0800)   */
+};
+
+/* TLVs this MPC recognizes */
+#define TLV_MPOA_DEVICE_TYPE         0x00a03e2a  
+
+/* MPOA device types in MPOA Device Type TLV */
+#define NON_MPOA    0
+#define MPS         1
+#define MPC         2
+#define MPS_AND_MPC 3
+
+
+/* MPC parameter defaults */
+
+#define MPC_P1 10  /* Shortcut-Setup Frame Count  */ 
+#define MPC_P2 1   /* Shortcut-Setup Frame Time   */
+#define MPC_P3 0   /* Flow-detection Protocols    */
+#define MPC_P4 5   /* MPC Initial Retry Time      */
+#define MPC_P5 40  /* MPC Retry Time Maximum      */
+#define MPC_P6 160 /* Hold Down Time              */
+#define HOLDING_TIME_DEFAULT 1200 /* same as MPS-p7 */
+
+/* MPC constants */
+
+#define MPC_C1 2   /* Retry Time Multiplier       */
+#define MPC_C2 60  /* Initial Keep-Alive Lifetime */
+
+/* Message types - to MPOA daemon */
+
+#define SND_MPOA_RES_RQST    201
+#define SET_MPS_CTRL_ADDR    202
+#define SND_MPOA_RES_RTRY    203 /* Different type in a retry due to req id         */
+#define STOP_KEEP_ALIVE_SM   204
+#define EGRESS_ENTRY_REMOVED 205
+#define SND_EGRESS_PURGE     206
+#define DIE                  207 /* tell the daemon to exit()                       */
+#define DATA_PLANE_PURGE     208 /* Data plane purge because of egress cache hit miss or dead MPS */
+#define OPEN_INGRESS_SVC     209
+
+/* Message types - from MPOA daemon */
+
+#define MPOA_TRIGGER_RCVD     101
+#define MPOA_RES_REPLY_RCVD   102
+#define INGRESS_PURGE_RCVD    103
+#define EGRESS_PURGE_RCVD     104
+#define MPS_DEATH             105
+#define CACHE_IMPOS_RCVD      106
+#define SET_MPC_CTRL_ADDR     107 /* Our MPC's control ATM address   */
+#define SET_MPS_MAC_ADDR      108
+#define CLEAN_UP_AND_EXIT     109
+#define SET_MPC_PARAMS        110 /* MPC configuration parameters    */
+
+/* Message types - bidirectional */       
+
+#define RELOAD                301 /* kill -HUP the daemon for reload */
+
+#endif /* _ATMMPC_H_ */
diff --git a/include/uapi/linux/atmppp.h b/include/uapi/linux/atmppp.h
new file mode 100644
index 00000000000..300dcce0c83
--- /dev/null
+++ b/include/uapi/linux/atmppp.h
@@ -0,0 +1,24 @@
+/* atmppp.h - RFC2364 PPPoATM */
+
+/* Written 2000 by Mitchell Blank Jr */
+
+#ifndef _LINUX_ATMPPP_H
+#define _LINUX_ATMPPP_H
+
+#include <linux/atm.h>
+
+#define PPPOATM_ENCAPS_AUTODETECT	(0)
+#define PPPOATM_ENCAPS_VC		(1)
+#define PPPOATM_ENCAPS_LLC		(2)
+
+/*
+ * This is for the ATM_SETBACKEND call - these are like socket families:
+ * the first element of the structure is the backend number and the rest
+ * is per-backend specific
+ */
+struct atm_backend_ppp {
+	atm_backend_t	backend_num;	/* ATM_BACKEND_PPP */
+	int		encaps;		/* PPPOATM_ENCAPS_* */
+};
+
+#endif	/* _LINUX_ATMPPP_H */
diff --git a/include/uapi/linux/atmsap.h b/include/uapi/linux/atmsap.h
new file mode 100644
index 00000000000..799b104515d
--- /dev/null
+++ b/include/uapi/linux/atmsap.h
@@ -0,0 +1,162 @@
+/* atmsap.h - ATM Service Access Point addressing definitions */
+
+/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */
+
+
+#ifndef _LINUX_ATMSAP_H
+#define _LINUX_ATMSAP_H
+
+#include <linux/atmapi.h>
+
+/*
+ * BEGIN_xx and END_xx markers are used for automatic generation of
+ * documentation. Do not change them.
+ */
+
+
+/*
+ * Layer 2 protocol identifiers
+ */
+
+/* BEGIN_L2 */
+#define ATM_L2_NONE	0	/* L2 not specified */
+#define ATM_L2_ISO1745  0x01	/* Basic mode ISO 1745 */
+#define ATM_L2_Q291	0x02	/* ITU-T Q.291 (Rec. I.441) */
+#define ATM_L2_X25_LL	0x06	/* ITU-T X.25, link layer */
+#define ATM_L2_X25_ML	0x07	/* ITU-T X.25, multilink */
+#define ATM_L2_LAPB	0x08	/* Extended LAPB, half-duplex (Rec. T.71) */
+#define ATM_L2_HDLC_ARM	0x09	/* HDLC ARM (ISO/IEC 4335) */
+#define ATM_L2_HDLC_NRM	0x0a	/* HDLC NRM (ISO/IEC 4335) */
+#define ATM_L2_HDLC_ABM	0x0b	/* HDLC ABM (ISO/IEC 4335) */
+#define ATM_L2_ISO8802	0x0c	/* LAN LLC (ISO/IEC 8802/2) */
+#define ATM_L2_X75	0x0d	/* ITU-T X.75, SLP */
+#define ATM_L2_Q922	0x0e	/* ITU-T Q.922 */
+#define ATM_L2_USER	0x10	/* user-specified */
+#define ATM_L2_ISO7776	0x11	/* ISO 7776 DTE-DTE */
+/* END_L2 */
+
+
+/*
+ * Layer 3 protocol identifiers
+ */
+
+/* BEGIN_L3 */
+#define ATM_L3_NONE	0	/* L3 not specified */
+#define ATM_L3_X25	0x06	/* ITU-T X.25, packet layer */
+#define ATM_L3_ISO8208	0x07	/* ISO/IEC 8208 */
+#define ATM_L3_X223	0x08	/* ITU-T X.223 | ISO/IEC 8878 */
+#define ATM_L3_ISO8473	0x09	/* ITU-T X.233 | ISO/IEC 8473 */
+#define ATM_L3_T70	0x0a	/* ITU-T T.70 minimum network layer */
+#define ATM_L3_TR9577	0x0b	/* ISO/IEC TR 9577 */
+#define ATM_L3_H310	0x0c	/* ITU-T Recommendation H.310 */
+#define ATM_L3_H321	0x0d	/* ITU-T Recommendation H.321 */
+#define ATM_L3_USER	0x10	/* user-specified */
+/* END_L3 */
+
+
+/*
+ * High layer identifiers
+ */
+
+/* BEGIN_HL */
+#define ATM_HL_NONE	0	/* HL not specified */
+#define ATM_HL_ISO	0x01	/* ISO */
+#define ATM_HL_USER	0x02	/* user-specific */
+#define ATM_HL_HLP	0x03	/* high layer profile - UNI 3.0 only */
+#define ATM_HL_VENDOR	0x04	/* vendor-specific application identifier */
+/* END_HL */
+
+
+/*
+ * ITU-T coded mode of operation
+ */
+
+/* BEGIN_IMD */
+#define ATM_IMD_NONE	 0	/* mode not specified */
+#define ATM_IMD_NORMAL	 1	/* normal mode of operation */
+#define ATM_IMD_EXTENDED 2	/* extended mode of operation */
+/* END_IMD */
+
+/*
+ * H.310 code points
+ */
+
+#define ATM_TT_NONE	0	/* terminal type not specified */
+#define ATM_TT_RX	1	/* receive only */
+#define ATM_TT_TX	2	/* send only */
+#define ATM_TT_RXTX	3	/* receive and send */
+
+#define ATM_MC_NONE	0	/* no multiplexing */
+#define ATM_MC_TS	1	/* transport stream (TS) */
+#define ATM_MC_TS_FEC	2	/* transport stream with forward error corr. */
+#define ATM_MC_PS	3	/* program stream (PS) */
+#define ATM_MC_PS_FEC	4	/* program stream with forward error corr. */
+#define ATM_MC_H221	5	/* ITU-T Rec. H.221 */
+
+/*
+ * SAP structures
+ */
+
+#define ATM_MAX_HLI	8	/* maximum high-layer information length */
+
+
+struct atm_blli {
+    unsigned char l2_proto;	/* layer 2 protocol */
+    union {
+	struct {
+	    unsigned char mode;	/* mode of operation (ATM_IMD_xxx), 0 if */
+				/* absent */
+	    unsigned char window; /* window size (k), 1-127 (0 to omit) */
+	} itu;			/* ITU-T encoding */
+	unsigned char user;	/* user-specified l2 information */
+    } l2;
+    unsigned char l3_proto;	/* layer 3 protocol */
+    union {
+	struct {
+	    unsigned char mode;	/* mode of operation (ATM_IMD_xxx), 0 if */
+				/* absent */
+	    unsigned char def_size; /* default packet size (log2), 4-12 (0 to */
+				    /* omit) */
+	    unsigned char window;/* packet window size, 1-127 (0 to omit) */
+	} itu;			/* ITU-T encoding */
+	unsigned char user;	/* user specified l3 information */
+	struct {		      /* if l3_proto = ATM_L3_H310 */
+	    unsigned char term_type;  /* terminal type */
+	    unsigned char fw_mpx_cap; /* forward multiplexing capability */
+				      /* only if term_type != ATM_TT_NONE */
+	    unsigned char bw_mpx_cap; /* backward multiplexing capability */
+				      /* only if term_type != ATM_TT_NONE */
+	} h310;
+	struct {		  /* if l3_proto = ATM_L3_TR9577 */
+	    unsigned char ipi;	  /* initial protocol id */
+	    unsigned char snap[5];/* IEEE 802.1 SNAP identifier */
+				  /* (only if ipi == NLPID_IEEE802_1_SNAP) */
+	} tr9577;
+    } l3;
+} __ATM_API_ALIGN;
+
+
+struct atm_bhli {
+    unsigned char hl_type;	/* high layer information type */
+    unsigned char hl_length;	/* length (only if hl_type == ATM_HL_USER || */
+				/* hl_type == ATM_HL_ISO) */
+    unsigned char hl_info[ATM_MAX_HLI];/* high layer information */
+};
+
+
+#define ATM_MAX_BLLI	3		/* maximum number of BLLI elements */
+
+
+struct atm_sap {
+	struct atm_bhli bhli;		/* local SAP, high-layer information */
+	struct atm_blli blli[ATM_MAX_BLLI] __ATM_API_ALIGN;
+					/* local SAP, low-layer info */
+};
+
+
+static __inline__ int blli_in_use(struct atm_blli blli)
+{
+	return blli.l2_proto || blli.l3_proto;
+}
+
+#endif
diff --git a/include/uapi/linux/atmsvc.h b/include/uapi/linux/atmsvc.h
new file mode 100644
index 00000000000..aa71583b8da
--- /dev/null
+++ b/include/uapi/linux/atmsvc.h
@@ -0,0 +1,55 @@
+/* atmsvc.h - ATM signaling kernel-demon interface definitions */
+ 
+/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
+ 
+
+#ifndef _LINUX_ATMSVC_H
+#define _LINUX_ATMSVC_H
+
+#include <linux/atmapi.h>
+#include <linux/atm.h>
+#include <linux/atmioc.h>
+
+
+#define ATMSIGD_CTRL _IO('a',ATMIOC_SPECIAL)
+				/* become ATM signaling demon control socket */
+
+enum atmsvc_msg_type { as_catch_null, as_bind, as_connect, as_accept, as_reject,
+		       as_listen, as_okay, as_error, as_indicate, as_close,
+		       as_itf_notify, as_modify, as_identify, as_terminate,
+		       as_addparty, as_dropparty };
+
+struct atmsvc_msg {
+	enum atmsvc_msg_type type;
+	atm_kptr_t vcc;
+	atm_kptr_t listen_vcc;		/* indicate */
+	int reply;			/* for okay and close:		   */
+					/*   < 0: error before active	   */
+					/*        (sigd has discarded ctx) */
+					/*   ==0: success		   */
+				        /*   > 0: error when active (still */
+					/*        need to close)	   */
+	struct sockaddr_atmpvc pvc;	/* indicate, okay (connect) */
+	struct sockaddr_atmsvc local;	/* local SVC address */
+	struct atm_qos qos;		/* QOS parameters */
+	struct atm_sap sap;		/* SAP */
+	unsigned int session;		/* for p2pm */
+	struct sockaddr_atmsvc svc;	/* SVC address */
+} __ATM_API_ALIGN;
+
+/*
+ * Message contents: see ftp://icaftp.epfl.ch/pub/linux/atm/docs/isp-*.tar.gz
+ */
+
+/*
+ * Some policy stuff for atmsigd and for net/atm/svc.c. Both have to agree on
+ * what PCR is used to request bandwidth from the device driver. net/atm/svc.c
+ * tries to do better than that, but only if there's no routing decision (i.e.
+ * if signaling only uses one ATM interface).
+ */
+
+#define SELECT_TOP_PCR(tp) ((tp).pcr ? (tp).pcr : \
+  (tp).max_pcr && (tp).max_pcr != ATM_MAX_PCR ? (tp).max_pcr : \
+  (tp).min_pcr ? (tp).min_pcr : ATM_MAX_PCR)
+
+#endif
diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h
new file mode 100644
index 00000000000..76352ac45f2
--- /dev/null
+++ b/include/uapi/linux/audit.h
@@ -0,0 +1,404 @@
+/* audit.h -- Auditing support
+ *
+ * Copyright 2003-2004 Red Hat Inc., Durham, North Carolina.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * Written by Rickard E. (Rik) Faith <faith@redhat.com>
+ *
+ */
+
+#ifndef _UAPI_LINUX_AUDIT_H_
+#define _UAPI_LINUX_AUDIT_H_
+
+#include <linux/types.h>
+#include <linux/elf-em.h>
+#include <linux/ptrace.h>
+
+/* The netlink messages for the audit system is divided into blocks:
+ * 1000 - 1099 are for commanding the audit system
+ * 1100 - 1199 user space trusted application messages
+ * 1200 - 1299 messages internal to the audit daemon
+ * 1300 - 1399 audit event messages
+ * 1400 - 1499 SE Linux use
+ * 1500 - 1599 kernel LSPP events
+ * 1600 - 1699 kernel crypto events
+ * 1700 - 1799 kernel anomaly records
+ * 1800 - 1899 kernel integrity events
+ * 1900 - 1999 future kernel use
+ * 2000 is for otherwise unclassified kernel audit messages (legacy)
+ * 2001 - 2099 unused (kernel)
+ * 2100 - 2199 user space anomaly records
+ * 2200 - 2299 user space actions taken in response to anomalies
+ * 2300 - 2399 user space generated LSPP events
+ * 2400 - 2499 user space crypto events
+ * 2500 - 2999 future user space (maybe integrity labels and related events)
+ *
+ * Messages from 1000-1199 are bi-directional. 1200-1299 & 2100 - 2999 are
+ * exclusively user space. 1300-2099 is kernel --> user space 
+ * communication.
+ */
+#define AUDIT_GET		1000	/* Get status */
+#define AUDIT_SET		1001	/* Set status (enable/disable/auditd) */
+#define AUDIT_LIST		1002	/* List syscall rules -- deprecated */
+#define AUDIT_ADD		1003	/* Add syscall rule -- deprecated */
+#define AUDIT_DEL		1004	/* Delete syscall rule -- deprecated */
+#define AUDIT_USER		1005	/* Message from userspace -- deprecated */
+#define AUDIT_LOGIN		1006	/* Define the login id and information */
+#define AUDIT_WATCH_INS		1007	/* Insert file/dir watch entry */
+#define AUDIT_WATCH_REM		1008	/* Remove file/dir watch entry */
+#define AUDIT_WATCH_LIST	1009	/* List all file/dir watches */
+#define AUDIT_SIGNAL_INFO	1010	/* Get info about sender of signal to auditd */
+#define AUDIT_ADD_RULE		1011	/* Add syscall filtering rule */
+#define AUDIT_DEL_RULE		1012	/* Delete syscall filtering rule */
+#define AUDIT_LIST_RULES	1013	/* List syscall filtering rules */
+#define AUDIT_TRIM		1014	/* Trim junk from watched tree */
+#define AUDIT_MAKE_EQUIV	1015	/* Append to watched tree */
+#define AUDIT_TTY_GET		1016	/* Get TTY auditing status */
+#define AUDIT_TTY_SET		1017	/* Set TTY auditing status */
+
+#define AUDIT_FIRST_USER_MSG	1100	/* Userspace messages mostly uninteresting to kernel */
+#define AUDIT_USER_AVC		1107	/* We filter this differently */
+#define AUDIT_USER_TTY		1124	/* Non-ICANON TTY input meaning */
+#define AUDIT_LAST_USER_MSG	1199
+#define AUDIT_FIRST_USER_MSG2	2100	/* More user space messages */
+#define AUDIT_LAST_USER_MSG2	2999
+ 
+#define AUDIT_DAEMON_START      1200    /* Daemon startup record */
+#define AUDIT_DAEMON_END        1201    /* Daemon normal stop record */
+#define AUDIT_DAEMON_ABORT      1202    /* Daemon error stop record */
+#define AUDIT_DAEMON_CONFIG     1203    /* Daemon config change */
+
+#define AUDIT_SYSCALL		1300	/* Syscall event */
+/* #define AUDIT_FS_WATCH	1301	 * Deprecated */
+#define AUDIT_PATH		1302	/* Filename path information */
+#define AUDIT_IPC		1303	/* IPC record */
+#define AUDIT_SOCKETCALL	1304	/* sys_socketcall arguments */
+#define AUDIT_CONFIG_CHANGE	1305	/* Audit system configuration change */
+#define AUDIT_SOCKADDR		1306	/* sockaddr copied as syscall arg */
+#define AUDIT_CWD		1307	/* Current working directory */
+#define AUDIT_EXECVE		1309	/* execve arguments */
+#define AUDIT_IPC_SET_PERM	1311	/* IPC new permissions record type */
+#define AUDIT_MQ_OPEN		1312	/* POSIX MQ open record type */
+#define AUDIT_MQ_SENDRECV	1313	/* POSIX MQ send/receive record type */
+#define AUDIT_MQ_NOTIFY		1314	/* POSIX MQ notify record type */
+#define AUDIT_MQ_GETSETATTR	1315	/* POSIX MQ get/set attribute record type */
+#define AUDIT_KERNEL_OTHER	1316	/* For use by 3rd party modules */
+#define AUDIT_FD_PAIR		1317    /* audit record for pipe/socketpair */
+#define AUDIT_OBJ_PID		1318	/* ptrace target */
+#define AUDIT_TTY		1319	/* Input on an administrative TTY */
+#define AUDIT_EOE		1320	/* End of multi-record event */
+#define AUDIT_BPRM_FCAPS	1321	/* Information about fcaps increasing perms */
+#define AUDIT_CAPSET		1322	/* Record showing argument to sys_capset */
+#define AUDIT_MMAP		1323	/* Record showing descriptor and flags in mmap */
+#define AUDIT_NETFILTER_PKT	1324	/* Packets traversing netfilter chains */
+#define AUDIT_NETFILTER_CFG	1325	/* Netfilter chain modifications */
+
+#define AUDIT_AVC		1400	/* SE Linux avc denial or grant */
+#define AUDIT_SELINUX_ERR	1401	/* Internal SE Linux Errors */
+#define AUDIT_AVC_PATH		1402	/* dentry, vfsmount pair from avc */
+#define AUDIT_MAC_POLICY_LOAD	1403	/* Policy file load */
+#define AUDIT_MAC_STATUS	1404	/* Changed enforcing,permissive,off */
+#define AUDIT_MAC_CONFIG_CHANGE	1405	/* Changes to booleans */
+#define AUDIT_MAC_UNLBL_ALLOW	1406	/* NetLabel: allow unlabeled traffic */
+#define AUDIT_MAC_CIPSOV4_ADD	1407	/* NetLabel: add CIPSOv4 DOI entry */
+#define AUDIT_MAC_CIPSOV4_DEL	1408	/* NetLabel: del CIPSOv4 DOI entry */
+#define AUDIT_MAC_MAP_ADD	1409	/* NetLabel: add LSM domain mapping */
+#define AUDIT_MAC_MAP_DEL	1410	/* NetLabel: del LSM domain mapping */
+#define AUDIT_MAC_IPSEC_ADDSA	1411	/* Not used */
+#define AUDIT_MAC_IPSEC_DELSA	1412	/* Not used  */
+#define AUDIT_MAC_IPSEC_ADDSPD	1413	/* Not used */
+#define AUDIT_MAC_IPSEC_DELSPD	1414	/* Not used */
+#define AUDIT_MAC_IPSEC_EVENT	1415	/* Audit an IPSec event */
+#define AUDIT_MAC_UNLBL_STCADD	1416	/* NetLabel: add a static label */
+#define AUDIT_MAC_UNLBL_STCDEL	1417	/* NetLabel: del a static label */
+
+#define AUDIT_FIRST_KERN_ANOM_MSG   1700
+#define AUDIT_LAST_KERN_ANOM_MSG    1799
+#define AUDIT_ANOM_PROMISCUOUS      1700 /* Device changed promiscuous mode */
+#define AUDIT_ANOM_ABEND            1701 /* Process ended abnormally */
+#define AUDIT_ANOM_LINK		    1702 /* Suspicious use of file links */
+#define AUDIT_INTEGRITY_DATA	    1800 /* Data integrity verification */
+#define AUDIT_INTEGRITY_METADATA    1801 /* Metadata integrity verification */
+#define AUDIT_INTEGRITY_STATUS	    1802 /* Integrity enable status */
+#define AUDIT_INTEGRITY_HASH	    1803 /* Integrity HASH type */
+#define AUDIT_INTEGRITY_PCR	    1804 /* PCR invalidation msgs */
+#define AUDIT_INTEGRITY_RULE	    1805 /* policy rule */
+
+#define AUDIT_KERNEL		2000	/* Asynchronous audit record. NOT A REQUEST. */
+
+/* Rule flags */
+#define AUDIT_FILTER_USER	0x00	/* Apply rule to user-generated messages */
+#define AUDIT_FILTER_TASK	0x01	/* Apply rule at task creation (not syscall) */
+#define AUDIT_FILTER_ENTRY	0x02	/* Apply rule at syscall entry */
+#define AUDIT_FILTER_WATCH	0x03	/* Apply rule to file system watches */
+#define AUDIT_FILTER_EXIT	0x04	/* Apply rule at syscall exit */
+#define AUDIT_FILTER_TYPE	0x05	/* Apply rule at audit_log_start */
+
+#define AUDIT_NR_FILTERS	6
+
+#define AUDIT_FILTER_PREPEND	0x10	/* Prepend to front of list */
+
+/* Rule actions */
+#define AUDIT_NEVER    0	/* Do not build context if rule matches */
+#define AUDIT_POSSIBLE 1	/* Build context if rule matches  */
+#define AUDIT_ALWAYS   2	/* Generate audit record if rule matches */
+
+/* Rule structure sizes -- if these change, different AUDIT_ADD and
+ * AUDIT_LIST commands must be implemented. */
+#define AUDIT_MAX_FIELDS   64
+#define AUDIT_MAX_KEY_LEN  256
+#define AUDIT_BITMASK_SIZE 64
+#define AUDIT_WORD(nr) ((__u32)((nr)/32))
+#define AUDIT_BIT(nr)  (1 << ((nr) - AUDIT_WORD(nr)*32))
+
+#define AUDIT_SYSCALL_CLASSES 16
+#define AUDIT_CLASS_DIR_WRITE 0
+#define AUDIT_CLASS_DIR_WRITE_32 1
+#define AUDIT_CLASS_CHATTR 2
+#define AUDIT_CLASS_CHATTR_32 3
+#define AUDIT_CLASS_READ 4
+#define AUDIT_CLASS_READ_32 5
+#define AUDIT_CLASS_WRITE 6
+#define AUDIT_CLASS_WRITE_32 7
+#define AUDIT_CLASS_SIGNAL 8
+#define AUDIT_CLASS_SIGNAL_32 9
+
+/* This bitmask is used to validate user input.  It represents all bits that
+ * are currently used in an audit field constant understood by the kernel.
+ * If you are adding a new #define AUDIT_<whatever>, please ensure that
+ * AUDIT_UNUSED_BITS is updated if need be. */
+#define AUDIT_UNUSED_BITS	0x07FFFC00
+
+/* AUDIT_FIELD_COMPARE rule list */
+#define AUDIT_COMPARE_UID_TO_OBJ_UID	1
+#define AUDIT_COMPARE_GID_TO_OBJ_GID	2
+#define AUDIT_COMPARE_EUID_TO_OBJ_UID	3
+#define AUDIT_COMPARE_EGID_TO_OBJ_GID	4
+#define AUDIT_COMPARE_AUID_TO_OBJ_UID	5
+#define AUDIT_COMPARE_SUID_TO_OBJ_UID	6
+#define AUDIT_COMPARE_SGID_TO_OBJ_GID	7
+#define AUDIT_COMPARE_FSUID_TO_OBJ_UID	8
+#define AUDIT_COMPARE_FSGID_TO_OBJ_GID	9
+
+#define AUDIT_COMPARE_UID_TO_AUID	10
+#define AUDIT_COMPARE_UID_TO_EUID	11
+#define AUDIT_COMPARE_UID_TO_FSUID	12
+#define AUDIT_COMPARE_UID_TO_SUID	13
+
+#define AUDIT_COMPARE_AUID_TO_FSUID	14
+#define AUDIT_COMPARE_AUID_TO_SUID	15
+#define AUDIT_COMPARE_AUID_TO_EUID	16
+
+#define AUDIT_COMPARE_EUID_TO_SUID	17
+#define AUDIT_COMPARE_EUID_TO_FSUID	18
+
+#define AUDIT_COMPARE_SUID_TO_FSUID	19
+
+#define AUDIT_COMPARE_GID_TO_EGID	20
+#define AUDIT_COMPARE_GID_TO_FSGID	21
+#define AUDIT_COMPARE_GID_TO_SGID	22
+
+#define AUDIT_COMPARE_EGID_TO_FSGID	23
+#define AUDIT_COMPARE_EGID_TO_SGID	24
+#define AUDIT_COMPARE_SGID_TO_FSGID	25
+
+#define AUDIT_MAX_FIELD_COMPARE		AUDIT_COMPARE_SGID_TO_FSGID
+
+/* Rule fields */
+				/* These are useful when checking the
+				 * task structure at task creation time
+				 * (AUDIT_PER_TASK).  */
+#define AUDIT_PID	0
+#define AUDIT_UID	1
+#define AUDIT_EUID	2
+#define AUDIT_SUID	3
+#define AUDIT_FSUID	4
+#define AUDIT_GID	5
+#define AUDIT_EGID	6
+#define AUDIT_SGID	7
+#define AUDIT_FSGID	8
+#define AUDIT_LOGINUID	9
+#define AUDIT_PERS	10
+#define AUDIT_ARCH	11
+#define AUDIT_MSGTYPE	12
+#define AUDIT_SUBJ_USER	13	/* security label user */
+#define AUDIT_SUBJ_ROLE	14	/* security label role */
+#define AUDIT_SUBJ_TYPE	15	/* security label type */
+#define AUDIT_SUBJ_SEN	16	/* security label sensitivity label */
+#define AUDIT_SUBJ_CLR	17	/* security label clearance label */
+#define AUDIT_PPID	18
+#define AUDIT_OBJ_USER	19
+#define AUDIT_OBJ_ROLE	20
+#define AUDIT_OBJ_TYPE	21
+#define AUDIT_OBJ_LEV_LOW	22
+#define AUDIT_OBJ_LEV_HIGH	23
+
+				/* These are ONLY useful when checking
+				 * at syscall exit time (AUDIT_AT_EXIT). */
+#define AUDIT_DEVMAJOR	100
+#define AUDIT_DEVMINOR	101
+#define AUDIT_INODE	102
+#define AUDIT_EXIT	103
+#define AUDIT_SUCCESS   104	/* exit >= 0; value ignored */
+#define AUDIT_WATCH	105
+#define AUDIT_PERM	106
+#define AUDIT_DIR	107
+#define AUDIT_FILETYPE	108
+#define AUDIT_OBJ_UID	109
+#define AUDIT_OBJ_GID	110
+#define AUDIT_FIELD_COMPARE	111
+
+#define AUDIT_ARG0      200
+#define AUDIT_ARG1      (AUDIT_ARG0+1)
+#define AUDIT_ARG2      (AUDIT_ARG0+2)
+#define AUDIT_ARG3      (AUDIT_ARG0+3)
+
+#define AUDIT_FILTERKEY	210
+
+#define AUDIT_NEGATE			0x80000000
+
+/* These are the supported operators.
+ *	4  2  1  8
+ *	=  >  <  ?
+ *	----------
+ *	0  0  0	 0	00	nonsense
+ *	0  0  0	 1	08	&  bit mask
+ *	0  0  1	 0	10	<
+ *	0  1  0	 0	20	>
+ *	0  1  1	 0	30	!=
+ *	1  0  0	 0	40	=
+ *	1  0  0	 1	48	&=  bit test
+ *	1  0  1	 0	50	<=
+ *	1  1  0	 0	60	>=
+ *	1  1  1	 1	78	all operators
+ */
+#define AUDIT_BIT_MASK			0x08000000
+#define AUDIT_LESS_THAN			0x10000000
+#define AUDIT_GREATER_THAN		0x20000000
+#define AUDIT_NOT_EQUAL			0x30000000
+#define AUDIT_EQUAL			0x40000000
+#define AUDIT_BIT_TEST			(AUDIT_BIT_MASK|AUDIT_EQUAL)
+#define AUDIT_LESS_THAN_OR_EQUAL	(AUDIT_LESS_THAN|AUDIT_EQUAL)
+#define AUDIT_GREATER_THAN_OR_EQUAL	(AUDIT_GREATER_THAN|AUDIT_EQUAL)
+#define AUDIT_OPERATORS			(AUDIT_EQUAL|AUDIT_NOT_EQUAL|AUDIT_BIT_MASK)
+
+enum {
+	Audit_equal,
+	Audit_not_equal,
+	Audit_bitmask,
+	Audit_bittest,
+	Audit_lt,
+	Audit_gt,
+	Audit_le,
+	Audit_ge,
+	Audit_bad
+};
+
+/* Status symbols */
+				/* Mask values */
+#define AUDIT_STATUS_ENABLED		0x0001
+#define AUDIT_STATUS_FAILURE		0x0002
+#define AUDIT_STATUS_PID		0x0004
+#define AUDIT_STATUS_RATE_LIMIT		0x0008
+#define AUDIT_STATUS_BACKLOG_LIMIT	0x0010
+				/* Failure-to-log actions */
+#define AUDIT_FAIL_SILENT	0
+#define AUDIT_FAIL_PRINTK	1
+#define AUDIT_FAIL_PANIC	2
+
+/* distinguish syscall tables */
+#define __AUDIT_ARCH_64BIT 0x80000000
+#define __AUDIT_ARCH_LE	   0x40000000
+#define AUDIT_ARCH_ALPHA	(EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_ARM		(EM_ARM|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_ARMEB	(EM_ARM)
+#define AUDIT_ARCH_CRIS		(EM_CRIS|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_FRV		(EM_FRV)
+#define AUDIT_ARCH_H8300	(EM_H8_300)
+#define AUDIT_ARCH_I386		(EM_386|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_IA64		(EM_IA_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_M32R		(EM_M32R)
+#define AUDIT_ARCH_M68K		(EM_68K)
+#define AUDIT_ARCH_MIPS		(EM_MIPS)
+#define AUDIT_ARCH_MIPSEL	(EM_MIPS|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_MIPS64	(EM_MIPS|__AUDIT_ARCH_64BIT)
+#define AUDIT_ARCH_MIPSEL64	(EM_MIPS|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_OPENRISC	(EM_OPENRISC)
+#define AUDIT_ARCH_PARISC	(EM_PARISC)
+#define AUDIT_ARCH_PARISC64	(EM_PARISC|__AUDIT_ARCH_64BIT)
+#define AUDIT_ARCH_PPC		(EM_PPC)
+#define AUDIT_ARCH_PPC64	(EM_PPC64|__AUDIT_ARCH_64BIT)
+#define AUDIT_ARCH_S390		(EM_S390)
+#define AUDIT_ARCH_S390X	(EM_S390|__AUDIT_ARCH_64BIT)
+#define AUDIT_ARCH_SH		(EM_SH)
+#define AUDIT_ARCH_SHEL		(EM_SH|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_SH64		(EM_SH|__AUDIT_ARCH_64BIT)
+#define AUDIT_ARCH_SHEL64	(EM_SH|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_SPARC	(EM_SPARC)
+#define AUDIT_ARCH_SPARC64	(EM_SPARCV9|__AUDIT_ARCH_64BIT)
+#define AUDIT_ARCH_X86_64	(EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+
+#define AUDIT_PERM_EXEC		1
+#define AUDIT_PERM_WRITE	2
+#define AUDIT_PERM_READ		4
+#define AUDIT_PERM_ATTR		8
+
+struct audit_status {
+	__u32		mask;		/* Bit mask for valid entries */
+	__u32		enabled;	/* 1 = enabled, 0 = disabled */
+	__u32		failure;	/* Failure-to-log action */
+	__u32		pid;		/* pid of auditd process */
+	__u32		rate_limit;	/* messages rate limit (per second) */
+	__u32		backlog_limit;	/* waiting messages limit */
+	__u32		lost;		/* messages lost */
+	__u32		backlog;	/* messages waiting in queue */
+};
+
+struct audit_tty_status {
+	__u32		enabled; /* 1 = enabled, 0 = disabled */
+};
+
+/* audit_rule_data supports filter rules with both integer and string
+ * fields.  It corresponds with AUDIT_ADD_RULE, AUDIT_DEL_RULE and
+ * AUDIT_LIST_RULES requests.
+ */
+struct audit_rule_data {
+	__u32		flags;	/* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */
+	__u32		action;	/* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */
+	__u32		field_count;
+	__u32		mask[AUDIT_BITMASK_SIZE]; /* syscall(s) affected */
+	__u32		fields[AUDIT_MAX_FIELDS];
+	__u32		values[AUDIT_MAX_FIELDS];
+	__u32		fieldflags[AUDIT_MAX_FIELDS];
+	__u32		buflen;	/* total length of string fields */
+	char		buf[0];	/* string fields buffer */
+};
+
+/* audit_rule is supported to maintain backward compatibility with
+ * userspace.  It supports integer fields only and corresponds to
+ * AUDIT_ADD, AUDIT_DEL and AUDIT_LIST requests.
+ */
+struct audit_rule {		/* for AUDIT_LIST, AUDIT_ADD, and AUDIT_DEL */
+	__u32		flags;	/* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */
+	__u32		action;	/* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */
+	__u32		field_count;
+	__u32		mask[AUDIT_BITMASK_SIZE];
+	__u32		fields[AUDIT_MAX_FIELDS];
+	__u32		values[AUDIT_MAX_FIELDS];
+};
+
+#endif /* _UAPI_LINUX_AUDIT_H_ */
diff --git a/include/uapi/linux/auto_fs.h b/include/uapi/linux/auto_fs.h
new file mode 100644
index 00000000000..77cdba9df27
--- /dev/null
+++ b/include/uapi/linux/auto_fs.h
@@ -0,0 +1,83 @@
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *   
+ * linux/include/linux/auto_fs.h
+ *
+ *   Copyright 1997 Transmeta Corporation - All Rights Reserved
+ *
+ * This file is part of the Linux kernel and is made available under
+ * the terms of the GNU General Public License, version 2, or at your
+ * option, any later version, incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+
+#ifndef _UAPI_LINUX_AUTO_FS_H
+#define _UAPI_LINUX_AUTO_FS_H
+
+#include <linux/types.h>
+#ifndef __KERNEL__
+#include <sys/ioctl.h>
+#endif /* __KERNEL__ */
+
+
+/* This file describes autofs v3 */
+#define AUTOFS_PROTO_VERSION	3
+
+/* Range of protocol versions defined */
+#define AUTOFS_MAX_PROTO_VERSION	AUTOFS_PROTO_VERSION
+#define AUTOFS_MIN_PROTO_VERSION	AUTOFS_PROTO_VERSION
+
+/*
+ * Architectures where both 32- and 64-bit binaries can be executed
+ * on 64-bit kernels need this.  This keeps the structure format
+ * uniform, and makes sure the wait_queue_token isn't too big to be
+ * passed back down to the kernel.
+ *
+ * This assumes that on these architectures:
+ * mode     32 bit    64 bit
+ * -------------------------
+ * int      32 bit    32 bit
+ * long     32 bit    64 bit
+ *
+ * If so, 32-bit user-space code should be backwards compatible.
+ */
+
+#if defined(__sparc__) || defined(__mips__) || defined(__x86_64__) \
+ || defined(__powerpc__) || defined(__s390__)
+typedef unsigned int autofs_wqt_t;
+#else
+typedef unsigned long autofs_wqt_t;
+#endif
+
+/* Packet types */
+#define autofs_ptype_missing	0	/* Missing entry (mount request) */
+#define autofs_ptype_expire	1	/* Expire entry (umount request) */
+
+struct autofs_packet_hdr {
+	int proto_version;		/* Protocol version */
+	int type;			/* Type of packet */
+};
+
+struct autofs_packet_missing {
+	struct autofs_packet_hdr hdr;
+        autofs_wqt_t wait_queue_token;
+	int len;
+	char name[NAME_MAX+1];
+};	
+
+/* v3 expire (via ioctl) */
+struct autofs_packet_expire {
+	struct autofs_packet_hdr hdr;
+	int len;
+	char name[NAME_MAX+1];
+};
+
+#define AUTOFS_IOC_READY      _IO(0x93,0x60)
+#define AUTOFS_IOC_FAIL       _IO(0x93,0x61)
+#define AUTOFS_IOC_CATATONIC  _IO(0x93,0x62)
+#define AUTOFS_IOC_PROTOVER   _IOR(0x93,0x63,int)
+#define AUTOFS_IOC_SETTIMEOUT32 _IOWR(0x93,0x64,compat_ulong_t)
+#define AUTOFS_IOC_SETTIMEOUT _IOWR(0x93,0x64,unsigned long)
+#define AUTOFS_IOC_EXPIRE     _IOR(0x93,0x65,struct autofs_packet_expire)
+
+#endif /* _UAPI_LINUX_AUTO_FS_H */
diff --git a/include/uapi/linux/auto_fs4.h b/include/uapi/linux/auto_fs4.h
new file mode 100644
index 00000000000..e02982fa295
--- /dev/null
+++ b/include/uapi/linux/auto_fs4.h
@@ -0,0 +1,164 @@
+/* -*- c -*-
+ * linux/include/linux/auto_fs4.h
+ *
+ * Copyright 1999-2000 Jeremy Fitzhardinge <jeremy@goop.org>
+ *
+ * This file is part of the Linux kernel and is made available under
+ * the terms of the GNU General Public License, version 2, or at your
+ * option, any later version, incorporated herein by reference.
+ */
+
+#ifndef _LINUX_AUTO_FS4_H
+#define _LINUX_AUTO_FS4_H
+
+/* Include common v3 definitions */
+#include <linux/types.h>
+#include <linux/auto_fs.h>
+
+/* autofs v4 definitions */
+#undef AUTOFS_PROTO_VERSION
+#undef AUTOFS_MIN_PROTO_VERSION
+#undef AUTOFS_MAX_PROTO_VERSION
+
+#define AUTOFS_PROTO_VERSION		5
+#define AUTOFS_MIN_PROTO_VERSION	3
+#define AUTOFS_MAX_PROTO_VERSION	5
+
+#define AUTOFS_PROTO_SUBVERSION		2
+
+/* Mask for expire behaviour */
+#define AUTOFS_EXP_IMMEDIATE		1
+#define AUTOFS_EXP_LEAVES		2
+
+#define AUTOFS_TYPE_ANY			0U
+#define AUTOFS_TYPE_INDIRECT		1U
+#define AUTOFS_TYPE_DIRECT		2U
+#define AUTOFS_TYPE_OFFSET		4U
+
+static inline void set_autofs_type_indirect(unsigned int *type)
+{
+	*type = AUTOFS_TYPE_INDIRECT;
+	return;
+}
+
+static inline unsigned int autofs_type_indirect(unsigned int type)
+{
+	return (type == AUTOFS_TYPE_INDIRECT);
+}
+
+static inline void set_autofs_type_direct(unsigned int *type)
+{
+	*type = AUTOFS_TYPE_DIRECT;
+	return;
+}
+
+static inline unsigned int autofs_type_direct(unsigned int type)
+{
+	return (type == AUTOFS_TYPE_DIRECT);
+}
+
+static inline void set_autofs_type_offset(unsigned int *type)
+{
+	*type = AUTOFS_TYPE_OFFSET;
+	return;
+}
+
+static inline unsigned int autofs_type_offset(unsigned int type)
+{
+	return (type == AUTOFS_TYPE_OFFSET);
+}
+
+static inline unsigned int autofs_type_trigger(unsigned int type)
+{
+	return (type == AUTOFS_TYPE_DIRECT || type == AUTOFS_TYPE_OFFSET);
+}
+
+/*
+ * This isn't really a type as we use it to say "no type set" to
+ * indicate we want to search for "any" mount in the
+ * autofs_dev_ioctl_ismountpoint() device ioctl function.
+ */
+static inline void set_autofs_type_any(unsigned int *type)
+{
+	*type = AUTOFS_TYPE_ANY;
+	return;
+}
+
+static inline unsigned int autofs_type_any(unsigned int type)
+{
+	return (type == AUTOFS_TYPE_ANY);
+}
+
+/* Daemon notification packet types */
+enum autofs_notify {
+	NFY_NONE,
+	NFY_MOUNT,
+	NFY_EXPIRE
+};
+
+/* Kernel protocol version 4 packet types */
+
+/* Expire entry (umount request) */
+#define autofs_ptype_expire_multi	2
+
+/* Kernel protocol version 5 packet types */
+
+/* Indirect mount missing and expire requests. */
+#define autofs_ptype_missing_indirect	3
+#define autofs_ptype_expire_indirect	4
+
+/* Direct mount missing and expire requests */
+#define autofs_ptype_missing_direct	5
+#define autofs_ptype_expire_direct	6
+
+/* v4 multi expire (via pipe) */
+struct autofs_packet_expire_multi {
+	struct autofs_packet_hdr hdr;
+        autofs_wqt_t wait_queue_token;
+	int len;
+	char name[NAME_MAX+1];
+};
+
+union autofs_packet_union {
+	struct autofs_packet_hdr hdr;
+	struct autofs_packet_missing missing;
+	struct autofs_packet_expire expire;
+	struct autofs_packet_expire_multi expire_multi;
+};
+
+/* autofs v5 common packet struct */
+struct autofs_v5_packet {
+	struct autofs_packet_hdr hdr;
+	autofs_wqt_t wait_queue_token;
+	__u32 dev;
+	__u64 ino;
+	__u32 uid;
+	__u32 gid;
+	__u32 pid;
+	__u32 tgid;
+	__u32 len;
+	char name[NAME_MAX+1];
+};
+
+typedef struct autofs_v5_packet autofs_packet_missing_indirect_t;
+typedef struct autofs_v5_packet autofs_packet_expire_indirect_t;
+typedef struct autofs_v5_packet autofs_packet_missing_direct_t;
+typedef struct autofs_v5_packet autofs_packet_expire_direct_t;
+
+union autofs_v5_packet_union {
+	struct autofs_packet_hdr hdr;
+	struct autofs_v5_packet v5_packet;
+	autofs_packet_missing_indirect_t missing_indirect;
+	autofs_packet_expire_indirect_t expire_indirect;
+	autofs_packet_missing_direct_t missing_direct;
+	autofs_packet_expire_direct_t expire_direct;
+};
+
+#define AUTOFS_IOC_EXPIRE_MULTI		_IOW(0x93,0x66,int)
+#define AUTOFS_IOC_EXPIRE_INDIRECT	AUTOFS_IOC_EXPIRE_MULTI
+#define AUTOFS_IOC_EXPIRE_DIRECT	AUTOFS_IOC_EXPIRE_MULTI
+#define AUTOFS_IOC_PROTOSUBVER		_IOR(0x93,0x67,int)
+#define AUTOFS_IOC_ASKUMOUNT		_IOR(0x93,0x70,int)
+
+
+#endif /* _LINUX_AUTO_FS4_H */
diff --git a/include/uapi/linux/auxvec.h b/include/uapi/linux/auxvec.h
new file mode 100644
index 00000000000..61594d598e7
--- /dev/null
+++ b/include/uapi/linux/auxvec.h
@@ -0,0 +1,35 @@
+#ifndef _UAPI_LINUX_AUXVEC_H
+#define _UAPI_LINUX_AUXVEC_H
+
+#include <asm/auxvec.h>
+
+/* Symbolic values for the entries in the auxiliary table
+   put on the initial stack */
+#define AT_NULL   0	/* end of vector */
+#define AT_IGNORE 1	/* entry should be ignored */
+#define AT_EXECFD 2	/* file descriptor of program */
+#define AT_PHDR   3	/* program headers for program */
+#define AT_PHENT  4	/* size of program header entry */
+#define AT_PHNUM  5	/* number of program headers */
+#define AT_PAGESZ 6	/* system page size */
+#define AT_BASE   7	/* base address of interpreter */
+#define AT_FLAGS  8	/* flags */
+#define AT_ENTRY  9	/* entry point of program */
+#define AT_NOTELF 10	/* program is not ELF */
+#define AT_UID    11	/* real uid */
+#define AT_EUID   12	/* effective uid */
+#define AT_GID    13	/* real gid */
+#define AT_EGID   14	/* effective gid */
+#define AT_PLATFORM 15  /* string identifying CPU for optimizations */
+#define AT_HWCAP  16    /* arch dependent hints at CPU capabilities */
+#define AT_CLKTCK 17	/* frequency at which times() increments */
+/* AT_* values 18 through 22 are reserved */
+#define AT_SECURE 23   /* secure mode boolean */
+#define AT_BASE_PLATFORM 24	/* string identifying real platform, may
+				 * differ from AT_PLATFORM. */
+#define AT_RANDOM 25	/* address of 16 random bytes */
+
+#define AT_EXECFN  31	/* filename of program */
+
+
+#endif /* _UAPI_LINUX_AUXVEC_H */
diff --git a/include/uapi/linux/ax25.h b/include/uapi/linux/ax25.h
new file mode 100644
index 00000000000..74c89a41732
--- /dev/null
+++ b/include/uapi/linux/ax25.h
@@ -0,0 +1,116 @@
+/*
+ * These are the public elements of the Linux kernel AX.25 code. A similar
+ * file netrom.h exists for the NET/ROM protocol.
+ */
+
+#ifndef	AX25_KERNEL_H
+#define	AX25_KERNEL_H
+
+#include <linux/socket.h>
+
+#define AX25_MTU	256
+#define AX25_MAX_DIGIS  8
+
+#define AX25_WINDOW	1
+#define AX25_T1		2
+#define AX25_N2		3
+#define AX25_T3		4
+#define AX25_T2		5
+#define	AX25_BACKOFF	6
+#define	AX25_EXTSEQ	7
+#define	AX25_PIDINCL	8
+#define AX25_IDLE	9
+#define AX25_PACLEN	10
+#define AX25_IAMDIGI	12
+
+#define AX25_KILL	99
+
+#define SIOCAX25GETUID		(SIOCPROTOPRIVATE+0)
+#define SIOCAX25ADDUID		(SIOCPROTOPRIVATE+1)
+#define SIOCAX25DELUID		(SIOCPROTOPRIVATE+2)
+#define SIOCAX25NOUID		(SIOCPROTOPRIVATE+3)
+#define SIOCAX25OPTRT		(SIOCPROTOPRIVATE+7)
+#define SIOCAX25CTLCON		(SIOCPROTOPRIVATE+8)
+#define SIOCAX25GETINFOOLD	(SIOCPROTOPRIVATE+9)
+#define SIOCAX25ADDFWD		(SIOCPROTOPRIVATE+10)
+#define SIOCAX25DELFWD		(SIOCPROTOPRIVATE+11)
+#define SIOCAX25DEVCTL          (SIOCPROTOPRIVATE+12)
+#define SIOCAX25GETINFO         (SIOCPROTOPRIVATE+13)
+
+#define AX25_SET_RT_IPMODE	2
+
+#define AX25_NOUID_DEFAULT	0
+#define AX25_NOUID_BLOCK	1
+
+typedef struct {
+	char		ax25_call[7];	/* 6 call + SSID (shifted ascii!) */
+} ax25_address;
+
+struct sockaddr_ax25 {
+	__kernel_sa_family_t sax25_family;
+	ax25_address	sax25_call;
+	int		sax25_ndigis;
+	/* Digipeater ax25_address sets follow */
+};
+
+#define sax25_uid	sax25_ndigis
+
+struct full_sockaddr_ax25 {
+	struct sockaddr_ax25 fsa_ax25;
+	ax25_address	fsa_digipeater[AX25_MAX_DIGIS];
+};
+
+struct ax25_routes_struct {
+	ax25_address	port_addr;
+	ax25_address	dest_addr;
+	unsigned char	digi_count;
+	ax25_address	digi_addr[AX25_MAX_DIGIS];
+};
+
+struct ax25_route_opt_struct {
+	ax25_address	port_addr;
+	ax25_address	dest_addr;
+	int		cmd;
+	int		arg;
+};
+
+struct ax25_ctl_struct {
+        ax25_address            port_addr;
+        ax25_address            source_addr;
+        ax25_address            dest_addr;
+        unsigned int            cmd;
+        unsigned long           arg;
+        unsigned char           digi_count;
+        ax25_address            digi_addr[AX25_MAX_DIGIS];
+};
+
+/* this will go away. Please do not export to user land */
+struct ax25_info_struct_deprecated {
+	unsigned int	n2, n2count;
+	unsigned int	t1, t1timer;
+	unsigned int	t2, t2timer;
+	unsigned int	t3, t3timer;
+	unsigned int	idle, idletimer;
+	unsigned int	state;
+	unsigned int	rcv_q, snd_q;
+};
+
+struct ax25_info_struct {
+	unsigned int	n2, n2count;
+	unsigned int	t1, t1timer;
+	unsigned int	t2, t2timer;
+	unsigned int	t3, t3timer;
+	unsigned int	idle, idletimer;
+	unsigned int	state;
+	unsigned int	rcv_q, snd_q;
+	unsigned int	vs, vr, va, vs_max;
+	unsigned int	paclen;
+	unsigned int	window;
+};
+
+struct ax25_fwd_struct {
+	ax25_address	port_from;
+	ax25_address	port_to;
+};
+
+#endif
diff --git a/include/uapi/linux/b1lli.h b/include/uapi/linux/b1lli.h
new file mode 100644
index 00000000000..713f712685d
--- /dev/null
+++ b/include/uapi/linux/b1lli.h
@@ -0,0 +1,73 @@
+/* $Id: b1lli.h,v 1.8.8.3 2001/09/23 22:25:05 kai Exp $
+ *
+ * ISDN lowlevel-module for AVM B1-card.
+ *
+ * Copyright 1996 by Carsten Paeth (calle@calle.in-berlin.de)
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef _B1LLI_H_
+#define _B1LLI_H_
+/*
+ * struct for loading t4 file 
+ */
+typedef struct avmb1_t4file {
+	int len;
+	unsigned char *data;
+} avmb1_t4file;
+
+typedef struct avmb1_loaddef {
+	int contr;
+	avmb1_t4file t4file;
+} avmb1_loaddef;
+
+typedef struct avmb1_loadandconfigdef {
+	int contr;
+	avmb1_t4file t4file;
+        avmb1_t4file t4config; 
+} avmb1_loadandconfigdef;
+
+typedef struct avmb1_resetdef {
+	int contr;
+} avmb1_resetdef;
+
+typedef struct avmb1_getdef {
+	int contr;
+	int cardtype;
+	int cardstate;
+} avmb1_getdef;
+
+/*
+ * struct for adding new cards 
+ */
+typedef struct avmb1_carddef {
+	int port;
+	int irq;
+} avmb1_carddef;
+
+#define AVM_CARDTYPE_B1		0
+#define AVM_CARDTYPE_T1		1
+#define AVM_CARDTYPE_M1		2
+#define AVM_CARDTYPE_M2		3
+
+typedef struct avmb1_extcarddef {
+	int port;
+	int irq;
+        int cardtype;
+        int cardnr;  /* for HEMA/T1 */
+} avmb1_extcarddef;
+
+#define	AVMB1_LOAD		0	/* load image to card */
+#define AVMB1_ADDCARD		1	/* add a new card - OBSOLETE */
+#define AVMB1_RESETCARD		2	/* reset a card */
+#define	AVMB1_LOAD_AND_CONFIG	3	/* load image and config to card */
+#define	AVMB1_ADDCARD_WITH_TYPE	4	/* add a new card, with cardtype */
+#define AVMB1_GET_CARDINFO	5	/* get cardtype */
+#define AVMB1_REMOVECARD	6	/* remove a card - OBSOLETE */
+
+#define	AVMB1_REGISTERCARD_IS_OBSOLETE
+
+#endif				/* _B1LLI_H_ */
diff --git a/include/uapi/linux/baycom.h b/include/uapi/linux/baycom.h
new file mode 100644
index 00000000000..81249e029da
--- /dev/null
+++ b/include/uapi/linux/baycom.h
@@ -0,0 +1,39 @@
+/*
+ * The Linux BAYCOM driver for the Baycom serial 1200 baud modem
+ * and the parallel 9600 baud modem
+ * (C) 1997-1998 by Thomas Sailer, HB9JNX/AE4WA
+ */
+
+#ifndef _BAYCOM_H
+#define _BAYCOM_H
+
+/* -------------------------------------------------------------------- */
+/*
+ * structs for the IOCTL commands
+ */
+
+struct baycom_debug_data {
+	unsigned long debug1;
+	unsigned long debug2;
+	long debug3;
+};
+
+struct baycom_ioctl {
+	int cmd;
+	union {
+		struct baycom_debug_data dbg;
+	} data;
+};
+
+/* -------------------------------------------------------------------- */
+
+/*
+ * ioctl values change for baycom
+ */
+#define BAYCOMCTL_GETDEBUG       0x92
+
+/* -------------------------------------------------------------------- */
+
+#endif /* _BAYCOM_H */
+
+/* --------------------------------------------------------------------- */
diff --git a/include/uapi/linux/bfs_fs.h b/include/uapi/linux/bfs_fs.h
new file mode 100644
index 00000000000..1c0b355aa51
--- /dev/null
+++ b/include/uapi/linux/bfs_fs.h
@@ -0,0 +1,81 @@
+/*
+ *	include/linux/bfs_fs.h - BFS data structures on disk.
+ *	Copyright (C) 1999 Tigran Aivazian <tigran@veritas.com>
+ */
+
+#ifndef _LINUX_BFS_FS_H
+#define _LINUX_BFS_FS_H
+
+#include <linux/types.h>
+
+#define BFS_BSIZE_BITS		9
+#define BFS_BSIZE		(1<<BFS_BSIZE_BITS)
+
+#define BFS_MAGIC		0x1BADFACE
+#define BFS_ROOT_INO		2
+#define BFS_INODES_PER_BLOCK	8
+
+/* SVR4 vnode type values (bfs_inode->i_vtype) */
+#define BFS_VDIR 2L
+#define BFS_VREG 1L
+
+/* BFS inode layout on disk */
+struct bfs_inode {
+	__le16 i_ino;
+	__u16 i_unused;
+	__le32 i_sblock;
+	__le32 i_eblock;
+	__le32 i_eoffset;
+	__le32 i_vtype;
+	__le32 i_mode;
+	__le32 i_uid;
+	__le32 i_gid;
+	__le32 i_nlink;
+	__le32 i_atime;
+	__le32 i_mtime;
+	__le32 i_ctime;
+	__u32 i_padding[4];
+};
+
+#define BFS_NAMELEN		14	
+#define BFS_DIRENT_SIZE		16
+#define BFS_DIRS_PER_BLOCK	32
+
+struct bfs_dirent {
+	__le16 ino;
+	char name[BFS_NAMELEN];
+};
+
+/* BFS superblock layout on disk */
+struct bfs_super_block {
+	__le32 s_magic;
+	__le32 s_start;
+	__le32 s_end;
+	__le32 s_from;
+	__le32 s_to;
+	__s32 s_bfrom;
+	__s32 s_bto;
+	char  s_fsname[6];
+	char  s_volume[6];
+	__u32 s_padding[118];
+};
+
+
+#define BFS_OFF2INO(offset) \
+        ((((offset) - BFS_BSIZE) / sizeof(struct bfs_inode)) + BFS_ROOT_INO)
+
+#define BFS_INO2OFF(ino) \
+	((__u32)(((ino) - BFS_ROOT_INO) * sizeof(struct bfs_inode)) + BFS_BSIZE)
+#define BFS_NZFILESIZE(ip) \
+        ((le32_to_cpu((ip)->i_eoffset) + 1) -  le32_to_cpu((ip)->i_sblock) * BFS_BSIZE)
+
+#define BFS_FILESIZE(ip) \
+        ((ip)->i_sblock == 0 ? 0 : BFS_NZFILESIZE(ip))
+
+#define BFS_FILEBLOCKS(ip) \
+        ((ip)->i_sblock == 0 ? 0 : (le32_to_cpu((ip)->i_eblock) + 1) -  le32_to_cpu((ip)->i_sblock))
+#define BFS_UNCLEAN(bfs_sb, sb)	\
+	((le32_to_cpu(bfs_sb->s_from) != -1) && (le32_to_cpu(bfs_sb->s_to) != -1) && !(sb->s_flags & MS_RDONLY))
+
+
+#endif	/* _LINUX_BFS_FS_H */
diff --git a/include/uapi/linux/binfmts.h b/include/uapi/linux/binfmts.h
new file mode 100644
index 00000000000..4eb5972867c
--- /dev/null
+++ b/include/uapi/linux/binfmts.h
@@ -0,0 +1,20 @@
+#ifndef _UAPI_LINUX_BINFMTS_H
+#define _UAPI_LINUX_BINFMTS_H
+
+#include <linux/capability.h>
+
+struct pt_regs;
+
+/*
+ * These are the maximum length and maximum number of strings passed to the
+ * execve() system call.  MAX_ARG_STRLEN is essentially random but serves to
+ * prevent the kernel from being unduly impacted by misaddressed pointers.
+ * MAX_ARG_STRINGS is chosen to fit in a signed 32-bit integer.
+ */
+#define MAX_ARG_STRLEN (PAGE_SIZE * 32)
+#define MAX_ARG_STRINGS 0x7FFFFFFF
+
+/* sizeof(linux_binprm->buf) */
+#define BINPRM_BUF_SIZE 128
+
+#endif /* _UAPI_LINUX_BINFMTS_H */
diff --git a/include/uapi/linux/blkpg.h b/include/uapi/linux/blkpg.h
new file mode 100644
index 00000000000..a8519446c11
--- /dev/null
+++ b/include/uapi/linux/blkpg.h
@@ -0,0 +1,59 @@
+#ifndef _LINUX_BLKPG_H
+#define _LINUX_BLKPG_H
+
+/*
+ * Partition table and disk geometry handling
+ *
+ * A single ioctl with lots of subfunctions:
+ *
+ * Device number stuff:
+ *    get_whole_disk()		(given the device number of a partition,
+ *                               find the device number of the encompassing disk)
+ *    get_all_partitions()	(given the device number of a disk, return the
+ *				 device numbers of all its known partitions)
+ *
+ * Partition stuff:
+ *    add_partition()
+ *    delete_partition()
+ *    test_partition_in_use()	(also for test_disk_in_use)
+ *
+ * Geometry stuff:
+ *    get_geometry()
+ *    set_geometry()
+ *    get_bios_drivedata()
+ *
+ * For today, only the partition stuff - aeb, 990515
+ */
+#include <linux/compiler.h>
+#include <linux/ioctl.h>
+
+#define BLKPG      _IO(0x12,105)
+
+/* The argument structure */
+struct blkpg_ioctl_arg {
+        int op;
+        int flags;
+        int datalen;
+        void __user *data;
+};
+
+/* The subfunctions (for the op field) */
+#define BLKPG_ADD_PARTITION	1
+#define BLKPG_DEL_PARTITION	2
+#define BLKPG_RESIZE_PARTITION	3
+
+/* Sizes of name fields. Unused at present. */
+#define BLKPG_DEVNAMELTH	64
+#define BLKPG_VOLNAMELTH	64
+
+/* The data structure for ADD_PARTITION and DEL_PARTITION */
+struct blkpg_partition {
+	long long start;		/* starting offset in bytes */
+	long long length;		/* length in bytes */
+	int pno;			/* partition number */
+	char devname[BLKPG_DEVNAMELTH];	/* partition name, like sda5 or c0d1p2,
+					   to be used in kernel messages */
+	char volname[BLKPG_VOLNAMELTH];	/* volume label */
+};
+
+#endif /* _LINUX_BLKPG_H */
diff --git a/include/uapi/linux/blktrace_api.h b/include/uapi/linux/blktrace_api.h
new file mode 100644
index 00000000000..c590ca6bfbd
--- /dev/null
+++ b/include/uapi/linux/blktrace_api.h
@@ -0,0 +1,142 @@
+#ifndef _UAPIBLKTRACE_H
+#define _UAPIBLKTRACE_H
+
+#include <linux/types.h>
+
+/*
+ * Trace categories
+ */
+enum blktrace_cat {
+	BLK_TC_READ	= 1 << 0,	/* reads */
+	BLK_TC_WRITE	= 1 << 1,	/* writes */
+	BLK_TC_FLUSH	= 1 << 2,	/* flush */
+	BLK_TC_SYNC	= 1 << 3,	/* sync IO */
+	BLK_TC_SYNCIO	= BLK_TC_SYNC,
+	BLK_TC_QUEUE	= 1 << 4,	/* queueing/merging */
+	BLK_TC_REQUEUE	= 1 << 5,	/* requeueing */
+	BLK_TC_ISSUE	= 1 << 6,	/* issue */
+	BLK_TC_COMPLETE	= 1 << 7,	/* completions */
+	BLK_TC_FS	= 1 << 8,	/* fs requests */
+	BLK_TC_PC	= 1 << 9,	/* pc requests */
+	BLK_TC_NOTIFY	= 1 << 10,	/* special message */
+	BLK_TC_AHEAD	= 1 << 11,	/* readahead */
+	BLK_TC_META	= 1 << 12,	/* metadata */
+	BLK_TC_DISCARD	= 1 << 13,	/* discard requests */
+	BLK_TC_DRV_DATA	= 1 << 14,	/* binary per-driver data */
+	BLK_TC_FUA	= 1 << 15,	/* fua requests */
+
+	BLK_TC_END	= 1 << 15,	/* we've run out of bits! */
+};
+
+#define BLK_TC_SHIFT		(16)
+#define BLK_TC_ACT(act)		((act) << BLK_TC_SHIFT)
+
+/*
+ * Basic trace actions
+ */
+enum blktrace_act {
+	__BLK_TA_QUEUE = 1,		/* queued */
+	__BLK_TA_BACKMERGE,		/* back merged to existing rq */
+	__BLK_TA_FRONTMERGE,		/* front merge to existing rq */
+	__BLK_TA_GETRQ,			/* allocated new request */
+	__BLK_TA_SLEEPRQ,		/* sleeping on rq allocation */
+	__BLK_TA_REQUEUE,		/* request requeued */
+	__BLK_TA_ISSUE,			/* sent to driver */
+	__BLK_TA_COMPLETE,		/* completed by driver */
+	__BLK_TA_PLUG,			/* queue was plugged */
+	__BLK_TA_UNPLUG_IO,		/* queue was unplugged by io */
+	__BLK_TA_UNPLUG_TIMER,		/* queue was unplugged by timer */
+	__BLK_TA_INSERT,		/* insert request */
+	__BLK_TA_SPLIT,			/* bio was split */
+	__BLK_TA_BOUNCE,		/* bio was bounced */
+	__BLK_TA_REMAP,			/* bio was remapped */
+	__BLK_TA_ABORT,			/* request aborted */
+	__BLK_TA_DRV_DATA,		/* driver-specific binary data */
+};
+
+/*
+ * Notify events.
+ */
+enum blktrace_notify {
+	__BLK_TN_PROCESS = 0,		/* establish pid/name mapping */
+	__BLK_TN_TIMESTAMP,		/* include system clock */
+	__BLK_TN_MESSAGE,		/* Character string message */
+};
+
+
+/*
+ * Trace actions in full. Additionally, read or write is masked
+ */
+#define BLK_TA_QUEUE		(__BLK_TA_QUEUE | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_BACKMERGE	(__BLK_TA_BACKMERGE | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_FRONTMERGE	(__BLK_TA_FRONTMERGE | BLK_TC_ACT(BLK_TC_QUEUE))
+#define	BLK_TA_GETRQ		(__BLK_TA_GETRQ | BLK_TC_ACT(BLK_TC_QUEUE))
+#define	BLK_TA_SLEEPRQ		(__BLK_TA_SLEEPRQ | BLK_TC_ACT(BLK_TC_QUEUE))
+#define	BLK_TA_REQUEUE		(__BLK_TA_REQUEUE | BLK_TC_ACT(BLK_TC_REQUEUE))
+#define BLK_TA_ISSUE		(__BLK_TA_ISSUE | BLK_TC_ACT(BLK_TC_ISSUE))
+#define BLK_TA_COMPLETE		(__BLK_TA_COMPLETE| BLK_TC_ACT(BLK_TC_COMPLETE))
+#define BLK_TA_PLUG		(__BLK_TA_PLUG | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_UNPLUG_IO	(__BLK_TA_UNPLUG_IO | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_UNPLUG_TIMER	(__BLK_TA_UNPLUG_TIMER | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_INSERT		(__BLK_TA_INSERT | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_SPLIT		(__BLK_TA_SPLIT)
+#define BLK_TA_BOUNCE		(__BLK_TA_BOUNCE)
+#define BLK_TA_REMAP		(__BLK_TA_REMAP | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_ABORT		(__BLK_TA_ABORT | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_DRV_DATA	(__BLK_TA_DRV_DATA | BLK_TC_ACT(BLK_TC_DRV_DATA))
+
+#define BLK_TN_PROCESS		(__BLK_TN_PROCESS | BLK_TC_ACT(BLK_TC_NOTIFY))
+#define BLK_TN_TIMESTAMP	(__BLK_TN_TIMESTAMP | BLK_TC_ACT(BLK_TC_NOTIFY))
+#define BLK_TN_MESSAGE		(__BLK_TN_MESSAGE | BLK_TC_ACT(BLK_TC_NOTIFY))
+
+#define BLK_IO_TRACE_MAGIC	0x65617400
+#define BLK_IO_TRACE_VERSION	0x07
+
+/*
+ * The trace itself
+ */
+struct blk_io_trace {
+	__u32 magic;		/* MAGIC << 8 | version */
+	__u32 sequence;		/* event number */
+	__u64 time;		/* in microseconds */
+	__u64 sector;		/* disk offset */
+	__u32 bytes;		/* transfer length */
+	__u32 action;		/* what happened */
+	__u32 pid;		/* who did it */
+	__u32 device;		/* device number */
+	__u32 cpu;		/* on what cpu did it happen */
+	__u16 error;		/* completion error */
+	__u16 pdu_len;		/* length of data after this trace */
+};
+
+/*
+ * The remap event
+ */
+struct blk_io_trace_remap {
+	__be32 device_from;
+	__be32 device_to;
+	__be64 sector_from;
+};
+
+enum {
+	Blktrace_setup = 1,
+	Blktrace_running,
+	Blktrace_stopped,
+};
+
+#define BLKTRACE_BDEV_SIZE	32
+
+/*
+ * User setup structure passed with BLKTRACESTART
+ */
+struct blk_user_trace_setup {
+	char name[BLKTRACE_BDEV_SIZE];	/* output */
+	__u16 act_mask;			/* input */
+	__u32 buf_size;			/* input */
+	__u32 buf_nr;			/* input */
+	__u64 start_lba;
+	__u64 end_lba;
+	__u32 pid;
+};
+
+#endif /* _UAPIBLKTRACE_H */
diff --git a/include/uapi/linux/bpqether.h b/include/uapi/linux/bpqether.h
new file mode 100644
index 00000000000..a6c35e1a89a
--- /dev/null
+++ b/include/uapi/linux/bpqether.h
@@ -0,0 +1,41 @@
+#ifndef	__BPQETHER_H
+#define	__BPQETHER_H
+
+/*
+ * 	Defines for the BPQETHER pseudo device driver
+ */
+
+#ifndef __LINUX_IF_ETHER_H
+#include <linux/if_ether.h>
+#endif
+
+#define SIOCSBPQETHOPT		(SIOCDEVPRIVATE+0)	/* reserved */
+#define SIOCSBPQETHADDR		(SIOCDEVPRIVATE+1)
+ 
+struct bpq_ethaddr {
+	unsigned char destination[ETH_ALEN];
+	unsigned char accept[ETH_ALEN];
+};
+
+/* 
+ * For SIOCSBPQETHOPT - this is compatible with PI2/PacketTwin card drivers,
+ * currently not implemented, though. If someone wants to hook a radio
+ * to his Ethernet card he may find this useful. ;-)
+ */
+
+#define SIOCGBPQETHPARAM	0x5000  /* get Level 1 parameters */
+#define SIOCSBPQETHPARAM	0x5001  /* set */
+
+struct bpq_req  {
+    int cmd;
+    int speed;			/* unused */
+    int clockmode;		/* unused */
+    int txdelay;
+    unsigned char persist;	/* unused */
+    int slotime;		/* unused */
+    int squeldelay;
+    int dmachan;		/* unused */
+    int irq;			/* unused */
+};
+
+#endif
diff --git a/include/uapi/linux/bsg.h b/include/uapi/linux/bsg.h
new file mode 100644
index 00000000000..7a12e1c0f37
--- /dev/null
+++ b/include/uapi/linux/bsg.h
@@ -0,0 +1,65 @@
+#ifndef _UAPIBSG_H
+#define _UAPIBSG_H
+
+#include <linux/types.h>
+
+#define BSG_PROTOCOL_SCSI		0
+
+#define BSG_SUB_PROTOCOL_SCSI_CMD	0
+#define BSG_SUB_PROTOCOL_SCSI_TMF	1
+#define BSG_SUB_PROTOCOL_SCSI_TRANSPORT	2
+
+/*
+ * For flags member below
+ * sg.h sg_io_hdr also has bits defined for it's flags member. However
+ * none of these bits are implemented/used by bsg. The bits below are
+ * allocated to not conflict with sg.h ones anyway.
+ */
+#define BSG_FLAG_Q_AT_TAIL 0x10 /* default, == 0 at this bit, is Q_AT_HEAD */
+
+struct sg_io_v4 {
+	__s32 guard;		/* [i] 'Q' to differentiate from v3 */
+	__u32 protocol;		/* [i] 0 -> SCSI , .... */
+	__u32 subprotocol;	/* [i] 0 -> SCSI command, 1 -> SCSI task
+				   management function, .... */
+
+	__u32 request_len;	/* [i] in bytes */
+	__u64 request;		/* [i], [*i] {SCSI: cdb} */
+	__u64 request_tag;	/* [i] {SCSI: task tag (only if flagged)} */
+	__u32 request_attr;	/* [i] {SCSI: task attribute} */
+	__u32 request_priority;	/* [i] {SCSI: task priority} */
+	__u32 request_extra;	/* [i] {spare, for padding} */
+	__u32 max_response_len;	/* [i] in bytes */
+	__u64 response;		/* [i], [*o] {SCSI: (auto)sense data} */
+
+        /* "dout_": data out (to device); "din_": data in (from device) */
+	__u32 dout_iovec_count;	/* [i] 0 -> "flat" dout transfer else
+				   dout_xfer points to array of iovec */
+	__u32 dout_xfer_len;	/* [i] bytes to be transferred to device */
+	__u32 din_iovec_count;	/* [i] 0 -> "flat" din transfer */
+	__u32 din_xfer_len;	/* [i] bytes to be transferred from device */
+	__u64 dout_xferp;	/* [i], [*i] */
+	__u64 din_xferp;	/* [i], [*o] */
+
+	__u32 timeout;		/* [i] units: millisecond */
+	__u32 flags;		/* [i] bit mask */
+	__u64 usr_ptr;		/* [i->o] unused internally */
+	__u32 spare_in;		/* [i] */
+
+	__u32 driver_status;	/* [o] 0 -> ok */
+	__u32 transport_status;	/* [o] 0 -> ok */
+	__u32 device_status;	/* [o] {SCSI: command completion status} */
+	__u32 retry_delay;	/* [o] {SCSI: status auxiliary information} */
+	__u32 info;		/* [o] additional information */
+	__u32 duration;		/* [o] time to complete, in milliseconds */
+	__u32 response_len;	/* [o] bytes of response actually written */
+	__s32 din_resid;	/* [o] din_xfer_len - actual_din_xfer_len */
+	__s32 dout_resid;	/* [o] dout_xfer_len - actual_dout_xfer_len */
+	__u64 generated_tag;	/* [o] {SCSI: transport generated task tag} */
+	__u32 spare_out;	/* [o] */
+
+	__u32 padding;
+};
+
+
+#endif /* _UAPIBSG_H */
diff --git a/include/uapi/linux/can.h b/include/uapi/linux/can.h
new file mode 100644
index 00000000000..e52958d7c2d
--- /dev/null
+++ b/include/uapi/linux/can.h
@@ -0,0 +1,162 @@
+/*
+ * linux/can.h
+ *
+ * Definitions for CAN network layer (socket addr / CAN frame / CAN filter)
+ *
+ * Authors: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
+ *          Urs Thuermann   <urs.thuermann@volkswagen.de>
+ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
+ * All rights reserved.
+ *
+ */
+
+#ifndef CAN_H
+#define CAN_H
+
+#include <linux/types.h>
+#include <linux/socket.h>
+
+/* controller area network (CAN) kernel definitions */
+
+/* special address description flags for the CAN_ID */
+#define CAN_EFF_FLAG 0x80000000U /* EFF/SFF is set in the MSB */
+#define CAN_RTR_FLAG 0x40000000U /* remote transmission request */
+#define CAN_ERR_FLAG 0x20000000U /* error message frame */
+
+/* valid bits in CAN ID for frame formats */
+#define CAN_SFF_MASK 0x000007FFU /* standard frame format (SFF) */
+#define CAN_EFF_MASK 0x1FFFFFFFU /* extended frame format (EFF) */
+#define CAN_ERR_MASK 0x1FFFFFFFU /* omit EFF, RTR, ERR flags */
+
+/*
+ * Controller Area Network Identifier structure
+ *
+ * bit 0-28	: CAN identifier (11/29 bit)
+ * bit 29	: error message frame flag (0 = data frame, 1 = error message)
+ * bit 30	: remote transmission request flag (1 = rtr frame)
+ * bit 31	: frame format flag (0 = standard 11 bit, 1 = extended 29 bit)
+ */
+typedef __u32 canid_t;
+
+#define CAN_SFF_ID_BITS		11
+#define CAN_EFF_ID_BITS		29
+
+/*
+ * Controller Area Network Error Message Frame Mask structure
+ *
+ * bit 0-28	: error class mask (see include/linux/can/error.h)
+ * bit 29-31	: set to zero
+ */
+typedef __u32 can_err_mask_t;
+
+/* CAN payload length and DLC definitions according to ISO 11898-1 */
+#define CAN_MAX_DLC 8
+#define CAN_MAX_DLEN 8
+
+/* CAN FD payload length and DLC definitions according to ISO 11898-7 */
+#define CANFD_MAX_DLC 15
+#define CANFD_MAX_DLEN 64
+
+/**
+ * struct can_frame - basic CAN frame structure
+ * @can_id:  CAN ID of the frame and CAN_*_FLAG flags, see canid_t definition
+ * @can_dlc: frame payload length in byte (0 .. 8) aka data length code
+ *           N.B. the DLC field from ISO 11898-1 Chapter 8.4.2.3 has a 1:1
+ *           mapping of the 'data length code' to the real payload length
+ * @data:    CAN frame payload (up to 8 byte)
+ */
+struct can_frame {
+	canid_t can_id;  /* 32 bit CAN_ID + EFF/RTR/ERR flags */
+	__u8    can_dlc; /* frame payload length in byte (0 .. CAN_MAX_DLEN) */
+	__u8    data[CAN_MAX_DLEN] __attribute__((aligned(8)));
+};
+
+/*
+ * defined bits for canfd_frame.flags
+ *
+ * The use of struct canfd_frame implies the Extended Data Length (EDL) bit to
+ * be set in the CAN frame bitstream on the wire. The EDL bit switch turns
+ * the CAN controllers bitstream processor into the CAN FD mode which creates
+ * two new options within the CAN FD frame specification:
+ *
+ * Bit Rate Switch - to indicate a second bitrate is/was used for the payload
+ * Error State Indicator - represents the error state of the transmitting node
+ *
+ * As the CANFD_ESI bit is internally generated by the transmitting CAN
+ * controller only the CANFD_BRS bit is relevant for real CAN controllers when
+ * building a CAN FD frame for transmission. Setting the CANFD_ESI bit can make
+ * sense for virtual CAN interfaces to test applications with echoed frames.
+ */
+#define CANFD_BRS 0x01 /* bit rate switch (second bitrate for payload data) */
+#define CANFD_ESI 0x02 /* error state indicator of the transmitting node */
+
+/**
+ * struct canfd_frame - CAN flexible data rate frame structure
+ * @can_id: CAN ID of the frame and CAN_*_FLAG flags, see canid_t definition
+ * @len:    frame payload length in byte (0 .. CANFD_MAX_DLEN)
+ * @flags:  additional flags for CAN FD
+ * @__res0: reserved / padding
+ * @__res1: reserved / padding
+ * @data:   CAN FD frame payload (up to CANFD_MAX_DLEN byte)
+ */
+struct canfd_frame {
+	canid_t can_id;  /* 32 bit CAN_ID + EFF/RTR/ERR flags */
+	__u8    len;     /* frame payload length in byte */
+	__u8    flags;   /* additional flags for CAN FD */
+	__u8    __res0;  /* reserved / padding */
+	__u8    __res1;  /* reserved / padding */
+	__u8    data[CANFD_MAX_DLEN] __attribute__((aligned(8)));
+};
+
+#define CAN_MTU		(sizeof(struct can_frame))
+#define CANFD_MTU	(sizeof(struct canfd_frame))
+
+/* particular protocols of the protocol family PF_CAN */
+#define CAN_RAW		1 /* RAW sockets */
+#define CAN_BCM		2 /* Broadcast Manager */
+#define CAN_TP16	3 /* VAG Transport Protocol v1.6 */
+#define CAN_TP20	4 /* VAG Transport Protocol v2.0 */
+#define CAN_MCNET	5 /* Bosch MCNet */
+#define CAN_ISOTP	6 /* ISO 15765-2 Transport Protocol */
+#define CAN_NPROTO	7
+
+#define SOL_CAN_BASE 100
+
+/**
+ * struct sockaddr_can - the sockaddr structure for CAN sockets
+ * @can_family:  address family number AF_CAN.
+ * @can_ifindex: CAN network interface index.
+ * @can_addr:    protocol specific address information
+ */
+struct sockaddr_can {
+	__kernel_sa_family_t can_family;
+	int         can_ifindex;
+	union {
+		/* transport protocol class address information (e.g. ISOTP) */
+		struct { canid_t rx_id, tx_id; } tp;
+
+		/* reserved for future CAN protocols address information */
+	} can_addr;
+};
+
+/**
+ * struct can_filter - CAN ID based filter in can_register().
+ * @can_id:   relevant bits of CAN ID which are not masked out.
+ * @can_mask: CAN mask (see description)
+ *
+ * Description:
+ * A filter matches, when
+ *
+ *          <received_can_id> & mask == can_id & mask
+ *
+ * The filter can be inverted (CAN_INV_FILTER bit set in can_id) or it can
+ * filter for error message frames (CAN_ERR_FLAG bit set in mask).
+ */
+struct can_filter {
+	canid_t can_id;
+	canid_t can_mask;
+};
+
+#define CAN_INV_FILTER 0x20000000U /* to be set in can_filter.can_id */
+
+#endif /* CAN_H */
diff --git a/include/uapi/linux/capability.h b/include/uapi/linux/capability.h
new file mode 100644
index 00000000000..ba478fa3012
--- /dev/null
+++ b/include/uapi/linux/capability.h
@@ -0,0 +1,358 @@
+/*
+ * This is <linux/capability.h>
+ *
+ * Andrew G. Morgan <morgan@kernel.org>
+ * Alexander Kjeldaas <astor@guardian.no>
+ * with help from Aleph1, Roland Buresund and Andrew Main.
+ *
+ * See here for the libcap library ("POSIX draft" compliance):
+ *
+ * ftp://www.kernel.org/pub/linux/libs/security/linux-privs/kernel-2.6/
+ */
+
+#ifndef _UAPI_LINUX_CAPABILITY_H
+#define _UAPI_LINUX_CAPABILITY_H
+
+#include <linux/types.h>
+
+struct task_struct;
+
+/* User-level do most of the mapping between kernel and user
+   capabilities based on the version tag given by the kernel. The
+   kernel might be somewhat backwards compatible, but don't bet on
+   it. */
+
+/* Note, cap_t, is defined by POSIX (draft) to be an "opaque" pointer to
+   a set of three capability sets.  The transposition of 3*the
+   following structure to such a composite is better handled in a user
+   library since the draft standard requires the use of malloc/free
+   etc.. */
+
+#define _LINUX_CAPABILITY_VERSION_1  0x19980330
+#define _LINUX_CAPABILITY_U32S_1     1
+
+#define _LINUX_CAPABILITY_VERSION_2  0x20071026  /* deprecated - use v3 */
+#define _LINUX_CAPABILITY_U32S_2     2
+
+#define _LINUX_CAPABILITY_VERSION_3  0x20080522
+#define _LINUX_CAPABILITY_U32S_3     2
+
+typedef struct __user_cap_header_struct {
+	__u32 version;
+	int pid;
+} __user *cap_user_header_t;
+
+typedef struct __user_cap_data_struct {
+        __u32 effective;
+        __u32 permitted;
+        __u32 inheritable;
+} __user *cap_user_data_t;
+
+
+#define VFS_CAP_REVISION_MASK	0xFF000000
+#define VFS_CAP_REVISION_SHIFT	24
+#define VFS_CAP_FLAGS_MASK	~VFS_CAP_REVISION_MASK
+#define VFS_CAP_FLAGS_EFFECTIVE	0x000001
+
+#define VFS_CAP_REVISION_1	0x01000000
+#define VFS_CAP_U32_1           1
+#define XATTR_CAPS_SZ_1         (sizeof(__le32)*(1 + 2*VFS_CAP_U32_1))
+
+#define VFS_CAP_REVISION_2	0x02000000
+#define VFS_CAP_U32_2           2
+#define XATTR_CAPS_SZ_2         (sizeof(__le32)*(1 + 2*VFS_CAP_U32_2))
+
+#define XATTR_CAPS_SZ           XATTR_CAPS_SZ_2
+#define VFS_CAP_U32             VFS_CAP_U32_2
+#define VFS_CAP_REVISION	VFS_CAP_REVISION_2
+
+struct vfs_cap_data {
+	__le32 magic_etc;            /* Little endian */
+	struct {
+		__le32 permitted;    /* Little endian */
+		__le32 inheritable;  /* Little endian */
+	} data[VFS_CAP_U32];
+};
+
+#ifndef __KERNEL__
+
+/*
+ * Backwardly compatible definition for source code - trapped in a
+ * 32-bit world. If you find you need this, please consider using
+ * libcap to untrap yourself...
+ */
+#define _LINUX_CAPABILITY_VERSION  _LINUX_CAPABILITY_VERSION_1
+#define _LINUX_CAPABILITY_U32S     _LINUX_CAPABILITY_U32S_1
+
+#endif
+
+
+/**
+ ** POSIX-draft defined capabilities.
+ **/
+
+/* In a system with the [_POSIX_CHOWN_RESTRICTED] option defined, this
+   overrides the restriction of changing file ownership and group
+   ownership. */
+
+#define CAP_CHOWN            0
+
+/* Override all DAC access, including ACL execute access if
+   [_POSIX_ACL] is defined. Excluding DAC access covered by
+   CAP_LINUX_IMMUTABLE. */
+
+#define CAP_DAC_OVERRIDE     1
+
+/* Overrides all DAC restrictions regarding read and search on files
+   and directories, including ACL restrictions if [_POSIX_ACL] is
+   defined. Excluding DAC access covered by CAP_LINUX_IMMUTABLE. */
+
+#define CAP_DAC_READ_SEARCH  2
+
+/* Overrides all restrictions about allowed operations on files, where
+   file owner ID must be equal to the user ID, except where CAP_FSETID
+   is applicable. It doesn't override MAC and DAC restrictions. */
+
+#define CAP_FOWNER           3
+
+/* Overrides the following restrictions that the effective user ID
+   shall match the file owner ID when setting the S_ISUID and S_ISGID
+   bits on that file; that the effective group ID (or one of the
+   supplementary group IDs) shall match the file owner ID when setting
+   the S_ISGID bit on that file; that the S_ISUID and S_ISGID bits are
+   cleared on successful return from chown(2) (not implemented). */
+
+#define CAP_FSETID           4
+
+/* Overrides the restriction that the real or effective user ID of a
+   process sending a signal must match the real or effective user ID
+   of the process receiving the signal. */
+
+#define CAP_KILL             5
+
+/* Allows setgid(2) manipulation */
+/* Allows setgroups(2) */
+/* Allows forged gids on socket credentials passing. */
+
+#define CAP_SETGID           6
+
+/* Allows set*uid(2) manipulation (including fsuid). */
+/* Allows forged pids on socket credentials passing. */
+
+#define CAP_SETUID           7
+
+
+/**
+ ** Linux-specific capabilities
+ **/
+
+/* Without VFS support for capabilities:
+ *   Transfer any capability in your permitted set to any pid,
+ *   remove any capability in your permitted set from any pid
+ * With VFS support for capabilities (neither of above, but)
+ *   Add any capability from current's capability bounding set
+ *       to the current process' inheritable set
+ *   Allow taking bits out of capability bounding set
+ *   Allow modification of the securebits for a process
+ */
+
+#define CAP_SETPCAP          8
+
+/* Allow modification of S_IMMUTABLE and S_APPEND file attributes */
+
+#define CAP_LINUX_IMMUTABLE  9
+
+/* Allows binding to TCP/UDP sockets below 1024 */
+/* Allows binding to ATM VCIs below 32 */
+
+#define CAP_NET_BIND_SERVICE 10
+
+/* Allow broadcasting, listen to multicast */
+
+#define CAP_NET_BROADCAST    11
+
+/* Allow interface configuration */
+/* Allow administration of IP firewall, masquerading and accounting */
+/* Allow setting debug option on sockets */
+/* Allow modification of routing tables */
+/* Allow setting arbitrary process / process group ownership on
+   sockets */
+/* Allow binding to any address for transparent proxying (also via NET_RAW) */
+/* Allow setting TOS (type of service) */
+/* Allow setting promiscuous mode */
+/* Allow clearing driver statistics */
+/* Allow multicasting */
+/* Allow read/write of device-specific registers */
+/* Allow activation of ATM control sockets */
+
+#define CAP_NET_ADMIN        12
+
+/* Allow use of RAW sockets */
+/* Allow use of PACKET sockets */
+/* Allow binding to any address for transparent proxying (also via NET_ADMIN) */
+
+#define CAP_NET_RAW          13
+
+/* Allow locking of shared memory segments */
+/* Allow mlock and mlockall (which doesn't really have anything to do
+   with IPC) */
+
+#define CAP_IPC_LOCK         14
+
+/* Override IPC ownership checks */
+
+#define CAP_IPC_OWNER        15
+
+/* Insert and remove kernel modules - modify kernel without limit */
+#define CAP_SYS_MODULE       16
+
+/* Allow ioperm/iopl access */
+/* Allow sending USB messages to any device via /proc/bus/usb */
+
+#define CAP_SYS_RAWIO        17
+
+/* Allow use of chroot() */
+
+#define CAP_SYS_CHROOT       18
+
+/* Allow ptrace() of any process */
+
+#define CAP_SYS_PTRACE       19
+
+/* Allow configuration of process accounting */
+
+#define CAP_SYS_PACCT        20
+
+/* Allow configuration of the secure attention key */
+/* Allow administration of the random device */
+/* Allow examination and configuration of disk quotas */
+/* Allow setting the domainname */
+/* Allow setting the hostname */
+/* Allow calling bdflush() */
+/* Allow mount() and umount(), setting up new smb connection */
+/* Allow some autofs root ioctls */
+/* Allow nfsservctl */
+/* Allow VM86_REQUEST_IRQ */
+/* Allow to read/write pci config on alpha */
+/* Allow irix_prctl on mips (setstacksize) */
+/* Allow flushing all cache on m68k (sys_cacheflush) */
+/* Allow removing semaphores */
+/* Used instead of CAP_CHOWN to "chown" IPC message queues, semaphores
+   and shared memory */
+/* Allow locking/unlocking of shared memory segment */
+/* Allow turning swap on/off */
+/* Allow forged pids on socket credentials passing */
+/* Allow setting readahead and flushing buffers on block devices */
+/* Allow setting geometry in floppy driver */
+/* Allow turning DMA on/off in xd driver */
+/* Allow administration of md devices (mostly the above, but some
+   extra ioctls) */
+/* Allow tuning the ide driver */
+/* Allow access to the nvram device */
+/* Allow administration of apm_bios, serial and bttv (TV) device */
+/* Allow manufacturer commands in isdn CAPI support driver */
+/* Allow reading non-standardized portions of pci configuration space */
+/* Allow DDI debug ioctl on sbpcd driver */
+/* Allow setting up serial ports */
+/* Allow sending raw qic-117 commands */
+/* Allow enabling/disabling tagged queuing on SCSI controllers and sending
+   arbitrary SCSI commands */
+/* Allow setting encryption key on loopback filesystem */
+/* Allow setting zone reclaim policy */
+
+#define CAP_SYS_ADMIN        21
+
+/* Allow use of reboot() */
+
+#define CAP_SYS_BOOT         22
+
+/* Allow raising priority and setting priority on other (different
+   UID) processes */
+/* Allow use of FIFO and round-robin (realtime) scheduling on own
+   processes and setting the scheduling algorithm used by another
+   process. */
+/* Allow setting cpu affinity on other processes */
+
+#define CAP_SYS_NICE         23
+
+/* Override resource limits. Set resource limits. */
+/* Override quota limits. */
+/* Override reserved space on ext2 filesystem */
+/* Modify data journaling mode on ext3 filesystem (uses journaling
+   resources) */
+/* NOTE: ext2 honors fsuid when checking for resource overrides, so
+   you can override using fsuid too */
+/* Override size restrictions on IPC message queues */
+/* Allow more than 64hz interrupts from the real-time clock */
+/* Override max number of consoles on console allocation */
+/* Override max number of keymaps */
+
+#define CAP_SYS_RESOURCE     24
+
+/* Allow manipulation of system clock */
+/* Allow irix_stime on mips */
+/* Allow setting the real-time clock */
+
+#define CAP_SYS_TIME         25
+
+/* Allow configuration of tty devices */
+/* Allow vhangup() of tty */
+
+#define CAP_SYS_TTY_CONFIG   26
+
+/* Allow the privileged aspects of mknod() */
+
+#define CAP_MKNOD            27
+
+/* Allow taking of leases on files */
+
+#define CAP_LEASE            28
+
+#define CAP_AUDIT_WRITE      29
+
+#define CAP_AUDIT_CONTROL    30
+
+#define CAP_SETFCAP	     31
+
+/* Override MAC access.
+   The base kernel enforces no MAC policy.
+   An LSM may enforce a MAC policy, and if it does and it chooses
+   to implement capability based overrides of that policy, this is
+   the capability it should use to do so. */
+
+#define CAP_MAC_OVERRIDE     32
+
+/* Allow MAC configuration or state changes.
+   The base kernel requires no MAC configuration.
+   An LSM may enforce a MAC policy, and if it does and it chooses
+   to implement capability based checks on modifications to that
+   policy or the data required to maintain it, this is the
+   capability it should use to do so. */
+
+#define CAP_MAC_ADMIN        33
+
+/* Allow configuring the kernel's syslog (printk behaviour) */
+
+#define CAP_SYSLOG           34
+
+/* Allow triggering something that will wake the system */
+
+#define CAP_WAKE_ALARM            35
+
+/* Allow preventing system suspends */
+
+#define CAP_BLOCK_SUSPEND    36
+
+#define CAP_LAST_CAP         CAP_BLOCK_SUSPEND
+
+#define cap_valid(x) ((x) >= 0 && (x) <= CAP_LAST_CAP)
+
+/*
+ * Bit location of each capability (used by user-space library and kernel)
+ */
+
+#define CAP_TO_INDEX(x)     ((x) >> 5)        /* 1 << 5 == bits in __u32 */
+#define CAP_TO_MASK(x)      (1 << ((x) & 31)) /* mask for indexed __u32 */
+
+
+#endif /* _UAPI_LINUX_CAPABILITY_H */
diff --git a/include/uapi/linux/capi.h b/include/uapi/linux/capi.h
new file mode 100644
index 00000000000..65100d6cb89
--- /dev/null
+++ b/include/uapi/linux/capi.h
@@ -0,0 +1,133 @@
+/* $Id: capi.h,v 1.4.6.1 2001/09/23 22:25:05 kai Exp $
+ * 
+ * CAPI 2.0 Interface for Linux
+ * 
+ * Copyright 1997 by Carsten Paeth (calle@calle.in-berlin.de)
+ * 
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef __LINUX_CAPI_H__
+#define __LINUX_CAPI_H__
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+#ifndef __KERNEL__
+#include <linux/kernelcapi.h>
+#endif
+
+/*
+ * CAPI_REGISTER
+ */
+
+typedef struct capi_register_params {	/* CAPI_REGISTER */
+	__u32 level3cnt;	/* No. of simulatneous user data connections */
+	__u32 datablkcnt;	/* No. of buffered data messages */
+	__u32 datablklen;	/* Size of buffered data messages */
+} capi_register_params;
+
+#define	CAPI_REGISTER	_IOW('C',0x01,struct capi_register_params)
+
+/*
+ * CAPI_GET_MANUFACTURER
+ */
+
+#define CAPI_MANUFACTURER_LEN		64
+
+#define	CAPI_GET_MANUFACTURER	_IOWR('C',0x06,int)	/* broken: wanted size 64 (CAPI_MANUFACTURER_LEN) */
+
+/*
+ * CAPI_GET_VERSION
+ */
+
+typedef struct capi_version {
+	__u32 majorversion;
+	__u32 minorversion;
+	__u32 majormanuversion;
+	__u32 minormanuversion;
+} capi_version;
+
+#define CAPI_GET_VERSION	_IOWR('C',0x07,struct capi_version)
+
+/*
+ * CAPI_GET_SERIAL
+ */
+
+#define CAPI_SERIAL_LEN		8
+#define CAPI_GET_SERIAL		_IOWR('C',0x08,int)	/* broken: wanted size 8 (CAPI_SERIAL_LEN) */
+
+/*
+ * CAPI_GET_PROFILE
+ */
+
+typedef struct capi_profile {
+	__u16 ncontroller;	/* number of installed controller */
+	__u16 nbchannel;	/* number of B-Channels */
+	__u32 goptions;		/* global options */
+	__u32 support1;		/* B1 protocols support */
+	__u32 support2;		/* B2 protocols support */
+	__u32 support3;		/* B3 protocols support */
+	__u32 reserved[6];	/* reserved */
+	__u32 manu[5];		/* manufacturer specific information */
+} capi_profile;
+
+#define CAPI_GET_PROFILE	_IOWR('C',0x09,struct capi_profile)
+
+typedef struct capi_manufacturer_cmd {
+	unsigned long cmd;
+	void __user *data;
+} capi_manufacturer_cmd;
+
+/*
+ * CAPI_MANUFACTURER_CMD
+ */
+
+#define CAPI_MANUFACTURER_CMD	_IOWR('C',0x20, struct capi_manufacturer_cmd)
+
+/*
+ * CAPI_GET_ERRCODE
+ * capi errcode is set, * if read, write, or ioctl returns EIO,
+ * ioctl returns errcode directly, and in arg, if != 0
+ */
+
+#define CAPI_GET_ERRCODE	_IOR('C',0x21, __u16)
+
+/*
+ * CAPI_INSTALLED
+ */
+#define CAPI_INSTALLED		_IOR('C',0x22, __u16)
+
+
+/*
+ * member contr is input for
+ * CAPI_GET_MANUFACTURER, CAPI_VERSION, CAPI_GET_SERIAL
+ * and CAPI_GET_PROFILE
+ */
+typedef union capi_ioctl_struct {
+	__u32 contr;
+	capi_register_params rparams;
+	__u8 manufacturer[CAPI_MANUFACTURER_LEN];
+	capi_version version;
+	__u8 serial[CAPI_SERIAL_LEN];
+	capi_profile profile;
+	capi_manufacturer_cmd cmd;
+	__u16 errcode;
+} capi_ioctl_struct;
+
+/*
+ * Middleware extension
+ */
+
+#define CAPIFLAG_HIGHJACKING	0x0001
+
+#define CAPI_GET_FLAGS		_IOR('C',0x23, unsigned)
+#define CAPI_SET_FLAGS		_IOR('C',0x24, unsigned)
+#define CAPI_CLR_FLAGS		_IOR('C',0x25, unsigned)
+
+#define CAPI_NCCI_OPENCOUNT	_IOR('C',0x26, unsigned)
+
+#define CAPI_NCCI_GETUNIT	_IOR('C',0x27, unsigned)
+
+#endif				/* __LINUX_CAPI_H__ */
diff --git a/include/uapi/linux/cciss_defs.h b/include/uapi/linux/cciss_defs.h
new file mode 100644
index 00000000000..316b670d4e3
--- /dev/null
+++ b/include/uapi/linux/cciss_defs.h
@@ -0,0 +1,130 @@
+#ifndef CCISS_DEFS_H
+#define CCISS_DEFS_H
+
+#include <linux/types.h>
+
+/* general boundary definitions */
+#define SENSEINFOBYTES          32 /* note that this value may vary
+				      between host implementations */
+
+/* Command Status value */
+#define CMD_SUCCESS             0x0000
+#define CMD_TARGET_STATUS       0x0001
+#define CMD_DATA_UNDERRUN       0x0002
+#define CMD_DATA_OVERRUN        0x0003
+#define CMD_INVALID             0x0004
+#define CMD_PROTOCOL_ERR        0x0005
+#define CMD_HARDWARE_ERR        0x0006
+#define CMD_CONNECTION_LOST     0x0007
+#define CMD_ABORTED             0x0008
+#define CMD_ABORT_FAILED        0x0009
+#define CMD_UNSOLICITED_ABORT   0x000A
+#define CMD_TIMEOUT             0x000B
+#define CMD_UNABORTABLE		0x000C
+
+/* transfer direction */
+#define XFER_NONE               0x00
+#define XFER_WRITE              0x01
+#define XFER_READ               0x02
+#define XFER_RSVD               0x03
+
+/* task attribute */
+#define ATTR_UNTAGGED           0x00
+#define ATTR_SIMPLE             0x04
+#define ATTR_HEADOFQUEUE        0x05
+#define ATTR_ORDERED            0x06
+#define ATTR_ACA                0x07
+
+/* cdb type */
+#define TYPE_CMD				0x00
+#define TYPE_MSG				0x01
+
+/* Type defs used in the following structs */
+#define BYTE __u8
+#define WORD __u16
+#define HWORD __u16
+#define DWORD __u32
+
+#define CISS_MAX_LUN	1024
+
+#define LEVEL2LUN   1 /* index into Target(x) structure, due to byte swapping */
+#define LEVEL3LUN   0
+
+#pragma pack(1)
+
+/* Command List Structure */
+typedef union _SCSI3Addr_struct {
+   struct {
+    BYTE Dev;
+    BYTE Bus:6;
+    BYTE Mode:2;        /* b00 */
+  } PeripDev;
+   struct {
+    BYTE DevLSB;
+    BYTE DevMSB:6;
+    BYTE Mode:2;        /* b01 */
+  } LogDev;
+   struct {
+    BYTE Dev:5;
+    BYTE Bus:3;
+    BYTE Targ:6;
+    BYTE Mode:2;        /* b10 */
+  } LogUnit;
+} SCSI3Addr_struct;
+
+typedef struct _PhysDevAddr_struct {
+  DWORD             TargetId:24;
+  DWORD             Bus:6;
+  DWORD             Mode:2;
+  SCSI3Addr_struct  Target[2]; /* 2 level target device addr */
+} PhysDevAddr_struct;
+
+typedef struct _LogDevAddr_struct {
+  DWORD            VolId:30;
+  DWORD            Mode:2;
+  BYTE             reserved[4];
+} LogDevAddr_struct;
+
+typedef union _LUNAddr_struct {
+  BYTE               LunAddrBytes[8];
+  SCSI3Addr_struct   SCSI3Lun[4];
+  PhysDevAddr_struct PhysDev;
+  LogDevAddr_struct  LogDev;
+} LUNAddr_struct;
+
+typedef struct _RequestBlock_struct {
+  BYTE   CDBLen;
+  struct {
+    BYTE Type:3;
+    BYTE Attribute:3;
+    BYTE Direction:2;
+  } Type;
+  HWORD  Timeout;
+  BYTE   CDB[16];
+} RequestBlock_struct;
+
+typedef union _MoreErrInfo_struct{
+  struct {
+    BYTE  Reserved[3];
+    BYTE  Type;
+    DWORD ErrorInfo;
+  } Common_Info;
+  struct{
+    BYTE  Reserved[2];
+    BYTE  offense_size; /* size of offending entry */
+    BYTE  offense_num;  /* byte # of offense 0-base */
+    DWORD offense_value;
+  } Invalid_Cmd;
+} MoreErrInfo_struct;
+typedef struct _ErrorInfo_struct {
+  BYTE               ScsiStatus;
+  BYTE               SenseLen;
+  HWORD              CommandStatus;
+  DWORD              ResidualCnt;
+  MoreErrInfo_struct MoreErrInfo;
+  BYTE               SenseInfo[SENSEINFOBYTES];
+} ErrorInfo_struct;
+
+#pragma pack()
+
+#endif /* CCISS_DEFS_H */
diff --git a/include/uapi/linux/cciss_ioctl.h b/include/uapi/linux/cciss_ioctl.h
new file mode 100644
index 00000000000..bb0b9ddf7ee
--- /dev/null
+++ b/include/uapi/linux/cciss_ioctl.h
@@ -0,0 +1,88 @@
+#ifndef _UAPICCISS_IOCTLH
+#define _UAPICCISS_IOCTLH
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+#include <linux/cciss_defs.h>
+
+#define CCISS_IOC_MAGIC 'B'
+
+
+typedef struct _cciss_pci_info_struct
+{
+	unsigned char 	bus;
+	unsigned char 	dev_fn;
+	unsigned short	domain;
+	__u32 		board_id;
+} cciss_pci_info_struct; 
+
+typedef struct _cciss_coalint_struct
+{
+	__u32  delay;
+	__u32  count;
+} cciss_coalint_struct;
+
+typedef char NodeName_type[16];
+
+typedef __u32 Heartbeat_type;
+
+#define CISS_PARSCSIU2 	0x0001
+#define CISS_PARCSCIU3 	0x0002
+#define CISS_FIBRE1G	0x0100
+#define CISS_FIBRE2G	0x0200
+typedef __u32 BusTypes_type;
+
+typedef char FirmwareVer_type[4];
+typedef __u32 DriverVer_type;
+
+#define MAX_KMALLOC_SIZE 128000
+
+typedef struct _IOCTL_Command_struct {
+  LUNAddr_struct	   LUN_info;
+  RequestBlock_struct      Request;
+  ErrorInfo_struct  	   error_info; 
+  WORD			   buf_size;  /* size in bytes of the buf */
+  BYTE			   __user *buf;
+} IOCTL_Command_struct;
+
+typedef struct _BIG_IOCTL_Command_struct {
+  LUNAddr_struct	   LUN_info;
+  RequestBlock_struct      Request;
+  ErrorInfo_struct  	   error_info;
+  DWORD			   malloc_size; /* < MAX_KMALLOC_SIZE in cciss.c */
+  DWORD			   buf_size;    /* size in bytes of the buf */
+  				        /* < malloc_size * MAXSGENTRIES */
+  BYTE			   __user *buf;
+} BIG_IOCTL_Command_struct;
+
+typedef struct _LogvolInfo_struct{
+	__u32	LunID;
+	int	num_opens;  /* number of opens on the logical volume */
+	int	num_parts;  /* number of partitions configured on logvol */
+} LogvolInfo_struct;
+
+#define CCISS_GETPCIINFO _IOR(CCISS_IOC_MAGIC, 1, cciss_pci_info_struct)
+
+#define CCISS_GETINTINFO _IOR(CCISS_IOC_MAGIC, 2, cciss_coalint_struct)
+#define CCISS_SETINTINFO _IOW(CCISS_IOC_MAGIC, 3, cciss_coalint_struct)
+
+#define CCISS_GETNODENAME _IOR(CCISS_IOC_MAGIC, 4, NodeName_type)
+#define CCISS_SETNODENAME _IOW(CCISS_IOC_MAGIC, 5, NodeName_type)
+
+#define CCISS_GETHEARTBEAT _IOR(CCISS_IOC_MAGIC, 6, Heartbeat_type)
+#define CCISS_GETBUSTYPES  _IOR(CCISS_IOC_MAGIC, 7, BusTypes_type)
+#define CCISS_GETFIRMVER   _IOR(CCISS_IOC_MAGIC, 8, FirmwareVer_type)
+#define CCISS_GETDRIVVER   _IOR(CCISS_IOC_MAGIC, 9, DriverVer_type)
+#define CCISS_REVALIDVOLS  _IO(CCISS_IOC_MAGIC, 10)
+#define CCISS_PASSTHRU	   _IOWR(CCISS_IOC_MAGIC, 11, IOCTL_Command_struct)
+#define CCISS_DEREGDISK	   _IO(CCISS_IOC_MAGIC, 12)
+
+/* no longer used... use REGNEWD instead */ 
+#define CCISS_REGNEWDISK  _IOW(CCISS_IOC_MAGIC, 13, int)
+
+#define CCISS_REGNEWD	   _IO(CCISS_IOC_MAGIC, 14)
+#define CCISS_RESCANDISK   _IO(CCISS_IOC_MAGIC, 16)
+#define CCISS_GETLUNINFO   _IOR(CCISS_IOC_MAGIC, 17, LogvolInfo_struct)
+#define CCISS_BIG_PASSTHRU _IOWR(CCISS_IOC_MAGIC, 18, BIG_IOCTL_Command_struct)
+
+#endif /* _UAPICCISS_IOCTLH */
diff --git a/include/uapi/linux/cdrom.h b/include/uapi/linux/cdrom.h
new file mode 100644
index 00000000000..898b866b300
--- /dev/null
+++ b/include/uapi/linux/cdrom.h
@@ -0,0 +1,912 @@
+/*
+ * -- <linux/cdrom.h>
+ * General header file for linux CD-ROM drivers 
+ * Copyright (C) 1992         David Giller, rafetmad@oxy.edu
+ *               1994, 1995   Eberhard Mönkeberg, emoenke@gwdg.de
+ *               1996         David van Leeuwen, david@tm.tno.nl
+ *               1997, 1998   Erik Andersen, andersee@debian.org
+ *               1998-2002    Jens Axboe, axboe@suse.de
+ */
+ 
+#ifndef _UAPI_LINUX_CDROM_H
+#define _UAPI_LINUX_CDROM_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+/*******************************************************
+ * As of Linux 2.1.x, all Linux CD-ROM application programs will use this 
+ * (and only this) include file.  It is my hope to provide Linux with
+ * a uniform interface between software accessing CD-ROMs and the various 
+ * device drivers that actually talk to the drives.  There may still be
+ * 23 different kinds of strange CD-ROM drives, but at least there will 
+ * now be one, and only one, Linux CD-ROM interface.
+ *
+ * Additionally, as of Linux 2.1.x, all Linux application programs 
+ * should use the O_NONBLOCK option when opening a CD-ROM device 
+ * for subsequent ioctl commands.  This allows for neat system errors 
+ * like "No medium found" or "Wrong medium type" upon attempting to 
+ * mount or play an empty slot, mount an audio disc, or play a data disc.
+ * Generally, changing an application program to support O_NONBLOCK
+ * is as easy as the following:
+ *       -    drive = open("/dev/cdrom", O_RDONLY);
+ *       +    drive = open("/dev/cdrom", O_RDONLY | O_NONBLOCK);
+ * It is worth the small change.
+ *
+ *  Patches for many common CD programs (provided by David A. van Leeuwen)
+ *  can be found at:  ftp://ftp.gwdg.de/pub/linux/cdrom/drivers/cm206/
+ * 
+ *******************************************************/
+
+/* When a driver supports a certain function, but the cdrom drive we are 
+ * using doesn't, we will return the error EDRIVE_CANT_DO_THIS.  We will 
+ * borrow the "Operation not supported" error from the network folks to 
+ * accomplish this.  Maybe someday we will get a more targeted error code, 
+ * but this will do for now... */
+#define EDRIVE_CANT_DO_THIS  EOPNOTSUPP
+
+/*******************************************************
+ * The CD-ROM IOCTL commands  -- these should be supported by 
+ * all the various cdrom drivers.  For the CD-ROM ioctls, we 
+ * will commandeer byte 0x53, or 'S'.
+ *******************************************************/
+#define CDROMPAUSE		0x5301 /* Pause Audio Operation */ 
+#define CDROMRESUME		0x5302 /* Resume paused Audio Operation */
+#define CDROMPLAYMSF		0x5303 /* Play Audio MSF (struct cdrom_msf) */
+#define CDROMPLAYTRKIND		0x5304 /* Play Audio Track/index 
+                                           (struct cdrom_ti) */
+#define CDROMREADTOCHDR		0x5305 /* Read TOC header 
+                                           (struct cdrom_tochdr) */
+#define CDROMREADTOCENTRY	0x5306 /* Read TOC entry 
+                                           (struct cdrom_tocentry) */
+#define CDROMSTOP		0x5307 /* Stop the cdrom drive */
+#define CDROMSTART		0x5308 /* Start the cdrom drive */
+#define CDROMEJECT		0x5309 /* Ejects the cdrom media */
+#define CDROMVOLCTRL		0x530a /* Control output volume 
+                                           (struct cdrom_volctrl) */
+#define CDROMSUBCHNL		0x530b /* Read subchannel data 
+                                           (struct cdrom_subchnl) */
+#define CDROMREADMODE2		0x530c /* Read CDROM mode 2 data (2336 Bytes) 
+                                           (struct cdrom_read) */
+#define CDROMREADMODE1		0x530d /* Read CDROM mode 1 data (2048 Bytes)
+                                           (struct cdrom_read) */
+#define CDROMREADAUDIO		0x530e /* (struct cdrom_read_audio) */
+#define CDROMEJECT_SW		0x530f /* enable(1)/disable(0) auto-ejecting */
+#define CDROMMULTISESSION	0x5310 /* Obtain the start-of-last-session 
+                                           address of multi session disks 
+                                           (struct cdrom_multisession) */
+#define CDROM_GET_MCN		0x5311 /* Obtain the "Universal Product Code" 
+                                           if available (struct cdrom_mcn) */
+#define CDROM_GET_UPC		CDROM_GET_MCN  /* This one is deprecated, 
+                                          but here anyway for compatibility */
+#define CDROMRESET		0x5312 /* hard-reset the drive */
+#define CDROMVOLREAD		0x5313 /* Get the drive's volume setting 
+                                          (struct cdrom_volctrl) */
+#define CDROMREADRAW		0x5314	/* read data in raw mode (2352 Bytes)
+                                           (struct cdrom_read) */
+/* 
+ * These ioctls are used only used in aztcd.c and optcd.c
+ */
+#define CDROMREADCOOKED		0x5315	/* read data in cooked mode */
+#define CDROMSEEK		0x5316  /* seek msf address */
+  
+/*
+ * This ioctl is only used by the scsi-cd driver.  
+   It is for playing audio in logical block addressing mode.
+ */
+#define CDROMPLAYBLK		0x5317	/* (struct cdrom_blk) */
+
+/* 
+ * These ioctls are only used in optcd.c
+ */
+#define CDROMREADALL		0x5318	/* read all 2646 bytes */
+
+/* 
+ * These ioctls are (now) only in ide-cd.c for controlling 
+ * drive spindown time.  They should be implemented in the
+ * Uniform driver, via generic packet commands, GPCMD_MODE_SELECT_10,
+ * GPCMD_MODE_SENSE_10 and the GPMODE_POWER_PAGE...
+ *  -Erik
+ */
+#define CDROMGETSPINDOWN        0x531d
+#define CDROMSETSPINDOWN        0x531e
+
+/* 
+ * These ioctls are implemented through the uniform CD-ROM driver
+ * They _will_ be adopted by all CD-ROM drivers, when all the CD-ROM
+ * drivers are eventually ported to the uniform CD-ROM driver interface.
+ */
+#define CDROMCLOSETRAY		0x5319	/* pendant of CDROMEJECT */
+#define CDROM_SET_OPTIONS	0x5320  /* Set behavior options */
+#define CDROM_CLEAR_OPTIONS	0x5321  /* Clear behavior options */
+#define CDROM_SELECT_SPEED	0x5322  /* Set the CD-ROM speed */
+#define CDROM_SELECT_DISC	0x5323  /* Select disc (for juke-boxes) */
+#define CDROM_MEDIA_CHANGED	0x5325  /* Check is media changed  */
+#define CDROM_DRIVE_STATUS	0x5326  /* Get tray position, etc. */
+#define CDROM_DISC_STATUS	0x5327  /* Get disc type, etc. */
+#define CDROM_CHANGER_NSLOTS    0x5328  /* Get number of slots */
+#define CDROM_LOCKDOOR		0x5329  /* lock or unlock door */
+#define CDROM_DEBUG		0x5330	/* Turn debug messages on/off */
+#define CDROM_GET_CAPABILITY	0x5331	/* get capabilities */
+
+/* Note that scsi/scsi_ioctl.h also uses 0x5382 - 0x5386.
+ * Future CDROM ioctls should be kept below 0x537F
+ */
+
+/* This ioctl is only used by sbpcd at the moment */
+#define CDROMAUDIOBUFSIZ        0x5382	/* set the audio buffer size */
+					/* conflict with SCSI_IOCTL_GET_IDLUN */
+
+/* DVD-ROM Specific ioctls */
+#define DVD_READ_STRUCT		0x5390  /* Read structure */
+#define DVD_WRITE_STRUCT	0x5391  /* Write structure */
+#define DVD_AUTH		0x5392  /* Authentication */
+
+#define CDROM_SEND_PACKET	0x5393	/* send a packet to the drive */
+#define CDROM_NEXT_WRITABLE	0x5394	/* get next writable block */
+#define CDROM_LAST_WRITTEN	0x5395	/* get last block written on disc */
+
+/*******************************************************
+ * CDROM IOCTL structures
+ *******************************************************/
+
+/* Address in MSF format */
+struct cdrom_msf0		
+{
+	__u8	minute;
+	__u8	second;
+	__u8	frame;
+};
+
+/* Address in either MSF or logical format */
+union cdrom_addr		
+{
+	struct cdrom_msf0	msf;
+	int			lba;
+};
+
+/* This struct is used by the CDROMPLAYMSF ioctl */ 
+struct cdrom_msf 
+{
+	__u8	cdmsf_min0;	/* start minute */
+	__u8	cdmsf_sec0;	/* start second */
+	__u8	cdmsf_frame0;	/* start frame */
+	__u8	cdmsf_min1;	/* end minute */
+	__u8	cdmsf_sec1;	/* end second */
+	__u8	cdmsf_frame1;	/* end frame */
+};
+
+/* This struct is used by the CDROMPLAYTRKIND ioctl */
+struct cdrom_ti 
+{
+	__u8	cdti_trk0;	/* start track */
+	__u8	cdti_ind0;	/* start index */
+	__u8	cdti_trk1;	/* end track */
+	__u8	cdti_ind1;	/* end index */
+};
+
+/* This struct is used by the CDROMREADTOCHDR ioctl */
+struct cdrom_tochdr 	
+{
+	__u8	cdth_trk0;	/* start track */
+	__u8	cdth_trk1;	/* end track */
+};
+
+/* This struct is used by the CDROMVOLCTRL and CDROMVOLREAD ioctls */
+struct cdrom_volctrl
+{
+	__u8	channel0;
+	__u8	channel1;
+	__u8	channel2;
+	__u8	channel3;
+};
+
+/* This struct is used by the CDROMSUBCHNL ioctl */
+struct cdrom_subchnl 
+{
+	__u8	cdsc_format;
+	__u8	cdsc_audiostatus;
+	__u8	cdsc_adr:	4;
+	__u8	cdsc_ctrl:	4;
+	__u8	cdsc_trk;
+	__u8	cdsc_ind;
+	union cdrom_addr cdsc_absaddr;
+	union cdrom_addr cdsc_reladdr;
+};
+
+
+/* This struct is used by the CDROMREADTOCENTRY ioctl */
+struct cdrom_tocentry 
+{
+	__u8	cdte_track;
+	__u8	cdte_adr	:4;
+	__u8	cdte_ctrl	:4;
+	__u8	cdte_format;
+	union cdrom_addr cdte_addr;
+	__u8	cdte_datamode;
+};
+
+/* This struct is used by the CDROMREADMODE1, and CDROMREADMODE2 ioctls */
+struct cdrom_read      
+{
+	int	cdread_lba;
+	char 	*cdread_bufaddr;
+	int	cdread_buflen;
+};
+
+/* This struct is used by the CDROMREADAUDIO ioctl */
+struct cdrom_read_audio
+{
+	union cdrom_addr addr; /* frame address */
+	__u8 addr_format;      /* CDROM_LBA or CDROM_MSF */
+	int nframes;           /* number of 2352-byte-frames to read at once */
+	__u8 __user *buf;      /* frame buffer (size: nframes*2352 bytes) */
+};
+
+/* This struct is used with the CDROMMULTISESSION ioctl */
+struct cdrom_multisession
+{
+	union cdrom_addr addr; /* frame address: start-of-last-session 
+	                           (not the new "frame 16"!).  Only valid
+	                           if the "xa_flag" is true. */
+	__u8 xa_flag;        /* 1: "is XA disk" */
+	__u8 addr_format;    /* CDROM_LBA or CDROM_MSF */
+};
+
+/* This struct is used with the CDROM_GET_MCN ioctl.  
+ * Very few audio discs actually have Universal Product Code information, 
+ * which should just be the Medium Catalog Number on the box.  Also note 
+ * that the way the codeis written on CD is _not_ uniform across all discs!
+ */  
+struct cdrom_mcn 
+{
+  __u8 medium_catalog_number[14]; /* 13 ASCII digits, null-terminated */
+};
+
+/* This is used by the CDROMPLAYBLK ioctl */
+struct cdrom_blk 
+{
+	unsigned from;
+	unsigned short len;
+};
+
+#define CDROM_PACKET_SIZE	12
+
+#define CGC_DATA_UNKNOWN	0
+#define CGC_DATA_WRITE		1
+#define CGC_DATA_READ		2
+#define CGC_DATA_NONE		3
+
+/* for CDROM_PACKET_COMMAND ioctl */
+struct cdrom_generic_command
+{
+	unsigned char 		cmd[CDROM_PACKET_SIZE];
+	unsigned char		__user *buffer;
+	unsigned int 		buflen;
+	int			stat;
+	struct request_sense	__user *sense;
+	unsigned char		data_direction;
+	int			quiet;
+	int			timeout;
+	void			__user *reserved[1];	/* unused, actually */
+};
+
+/*
+ * A CD-ROM physical sector size is 2048, 2052, 2056, 2324, 2332, 2336, 
+ * 2340, or 2352 bytes long.  
+
+*         Sector types of the standard CD-ROM data formats:
+ *
+ * format   sector type               user data size (bytes)
+ * -----------------------------------------------------------------------------
+ *   1     (Red Book)    CD-DA          2352    (CD_FRAMESIZE_RAW)
+ *   2     (Yellow Book) Mode1 Form1    2048    (CD_FRAMESIZE)
+ *   3     (Yellow Book) Mode1 Form2    2336    (CD_FRAMESIZE_RAW0)
+ *   4     (Green Book)  Mode2 Form1    2048    (CD_FRAMESIZE)
+ *   5     (Green Book)  Mode2 Form2    2328    (2324+4 spare bytes)
+ *
+ *
+ *       The layout of the standard CD-ROM data formats:
+ * -----------------------------------------------------------------------------
+ * - audio (red):                  | audio_sample_bytes |
+ *                                 |        2352        |
+ *
+ * - data (yellow, mode1):         | sync - head - data - EDC - zero - ECC |
+ *                                 |  12  -   4  - 2048 -  4  -   8  - 276 |
+ *
+ * - data (yellow, mode2):         | sync - head - data |
+ *                                 |  12  -   4  - 2336 |
+ *
+ * - XA data (green, mode2 form1): | sync - head - sub - data - EDC - ECC |
+ *                                 |  12  -   4  -  8  - 2048 -  4  - 276 |
+ *
+ * - XA data (green, mode2 form2): | sync - head - sub - data - Spare |
+ *                                 |  12  -   4  -  8  - 2324 -  4    |
+ *
+ */
+
+/* Some generally useful CD-ROM information -- mostly based on the above */
+#define CD_MINS              74 /* max. minutes per CD, not really a limit */
+#define CD_SECS              60 /* seconds per minute */
+#define CD_FRAMES            75 /* frames per second */
+#define CD_SYNC_SIZE         12 /* 12 sync bytes per raw data frame */
+#define CD_MSF_OFFSET       150 /* MSF numbering offset of first frame */
+#define CD_CHUNK_SIZE        24 /* lowest-level "data bytes piece" */
+#define CD_NUM_OF_CHUNKS     98 /* chunks per frame */
+#define CD_FRAMESIZE_SUB     96 /* subchannel data "frame" size */
+#define CD_HEAD_SIZE          4 /* header (address) bytes per raw data frame */
+#define CD_SUBHEAD_SIZE       8 /* subheader bytes per raw XA data frame */
+#define CD_EDC_SIZE           4 /* bytes EDC per most raw data frame types */
+#define CD_ZERO_SIZE          8 /* bytes zero per yellow book mode 1 frame */
+#define CD_ECC_SIZE         276 /* bytes ECC per most raw data frame types */
+#define CD_FRAMESIZE       2048 /* bytes per frame, "cooked" mode */
+#define CD_FRAMESIZE_RAW   2352 /* bytes per frame, "raw" mode */
+#define CD_FRAMESIZE_RAWER 2646 /* The maximum possible returned bytes */ 
+/* most drives don't deliver everything: */
+#define CD_FRAMESIZE_RAW1 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE) /*2340*/
+#define CD_FRAMESIZE_RAW0 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE-CD_HEAD_SIZE) /*2336*/
+
+#define CD_XA_HEAD        (CD_HEAD_SIZE+CD_SUBHEAD_SIZE) /* "before data" part of raw XA frame */
+#define CD_XA_TAIL        (CD_EDC_SIZE+CD_ECC_SIZE) /* "after data" part of raw XA frame */
+#define CD_XA_SYNC_HEAD   (CD_SYNC_SIZE+CD_XA_HEAD) /* sync bytes + header of XA frame */
+
+/* CD-ROM address types (cdrom_tocentry.cdte_format) */
+#define	CDROM_LBA 0x01 /* "logical block": first frame is #0 */
+#define	CDROM_MSF 0x02 /* "minute-second-frame": binary, not bcd here! */
+
+/* bit to tell whether track is data or audio (cdrom_tocentry.cdte_ctrl) */
+#define	CDROM_DATA_TRACK	0x04
+
+/* The leadout track is always 0xAA, regardless of # of tracks on disc */
+#define	CDROM_LEADOUT		0xAA
+
+/* audio states (from SCSI-2, but seen with other drives, too) */
+#define	CDROM_AUDIO_INVALID	0x00	/* audio status not supported */
+#define	CDROM_AUDIO_PLAY	0x11	/* audio play operation in progress */
+#define	CDROM_AUDIO_PAUSED	0x12	/* audio play operation paused */
+#define	CDROM_AUDIO_COMPLETED	0x13	/* audio play successfully completed */
+#define	CDROM_AUDIO_ERROR	0x14	/* audio play stopped due to error */
+#define	CDROM_AUDIO_NO_STATUS	0x15	/* no current audio status to return */
+
+/* capability flags used with the uniform CD-ROM driver */ 
+#define CDC_CLOSE_TRAY		0x1     /* caddy systems _can't_ close */
+#define CDC_OPEN_TRAY		0x2     /* but _can_ eject.  */
+#define CDC_LOCK		0x4     /* disable manual eject */
+#define CDC_SELECT_SPEED 	0x8     /* programmable speed */
+#define CDC_SELECT_DISC		0x10    /* select disc from juke-box */
+#define CDC_MULTI_SESSION 	0x20    /* read sessions>1 */
+#define CDC_MCN			0x40    /* Medium Catalog Number */
+#define CDC_MEDIA_CHANGED 	0x80    /* media changed */
+#define CDC_PLAY_AUDIO		0x100   /* audio functions */
+#define CDC_RESET               0x200   /* hard reset device */
+#define CDC_DRIVE_STATUS        0x800   /* driver implements drive status */
+#define CDC_GENERIC_PACKET	0x1000	/* driver implements generic packets */
+#define CDC_CD_R		0x2000	/* drive is a CD-R */
+#define CDC_CD_RW		0x4000	/* drive is a CD-RW */
+#define CDC_DVD			0x8000	/* drive is a DVD */
+#define CDC_DVD_R		0x10000	/* drive can write DVD-R */
+#define CDC_DVD_RAM		0x20000	/* drive can write DVD-RAM */
+#define CDC_MO_DRIVE		0x40000 /* drive is an MO device */
+#define CDC_MRW			0x80000 /* drive can read MRW */
+#define CDC_MRW_W		0x100000 /* drive can write MRW */
+#define CDC_RAM			0x200000 /* ok to open for WRITE */
+
+/* drive status possibilities returned by CDROM_DRIVE_STATUS ioctl */
+#define CDS_NO_INFO		0	/* if not implemented */
+#define CDS_NO_DISC		1
+#define CDS_TRAY_OPEN		2
+#define CDS_DRIVE_NOT_READY	3
+#define CDS_DISC_OK		4
+
+/* return values for the CDROM_DISC_STATUS ioctl */
+/* can also return CDS_NO_[INFO|DISC], from above */
+#define CDS_AUDIO		100
+#define CDS_DATA_1		101
+#define CDS_DATA_2		102
+#define CDS_XA_2_1		103
+#define CDS_XA_2_2		104
+#define CDS_MIXED		105
+
+/* User-configurable behavior options for the uniform CD-ROM driver */
+#define CDO_AUTO_CLOSE		0x1     /* close tray on first open() */
+#define CDO_AUTO_EJECT		0x2     /* open tray on last release() */
+#define CDO_USE_FFLAGS		0x4     /* use O_NONBLOCK information on open */
+#define CDO_LOCK		0x8     /* lock tray on open files */
+#define CDO_CHECK_TYPE		0x10    /* check type on open for data */
+
+/* Special codes used when specifying changer slots. */
+#define CDSL_NONE       	(INT_MAX-1)
+#define CDSL_CURRENT    	INT_MAX
+
+/* For partition based multisession access. IDE can handle 64 partitions
+ * per drive - SCSI CD-ROM's use minors to differentiate between the
+ * various drives, so we can't do multisessions the same way there.
+ * Use the -o session=x option to mount on them.
+ */
+#define CD_PART_MAX		64
+#define CD_PART_MASK		(CD_PART_MAX - 1)
+
+/*********************************************************************
+ * Generic Packet commands, MMC commands, and such
+ *********************************************************************/
+
+ /* The generic packet command opcodes for CD/DVD Logical Units,
+ * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
+#define GPCMD_BLANK			    0xa1
+#define GPCMD_CLOSE_TRACK		    0x5b
+#define GPCMD_FLUSH_CACHE		    0x35
+#define GPCMD_FORMAT_UNIT		    0x04
+#define GPCMD_GET_CONFIGURATION		    0x46
+#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a
+#define GPCMD_GET_PERFORMANCE		    0xac
+#define GPCMD_INQUIRY			    0x12
+#define GPCMD_LOAD_UNLOAD		    0xa6
+#define GPCMD_MECHANISM_STATUS		    0xbd
+#define GPCMD_MODE_SELECT_10		    0x55
+#define GPCMD_MODE_SENSE_10		    0x5a
+#define GPCMD_PAUSE_RESUME		    0x4b
+#define GPCMD_PLAY_AUDIO_10		    0x45
+#define GPCMD_PLAY_AUDIO_MSF		    0x47
+#define GPCMD_PLAY_AUDIO_TI		    0x48
+#define GPCMD_PLAY_CD			    0xbc
+#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL  0x1e
+#define GPCMD_READ_10			    0x28
+#define GPCMD_READ_12			    0xa8
+#define GPCMD_READ_BUFFER		    0x3c
+#define GPCMD_READ_BUFFER_CAPACITY	    0x5c
+#define GPCMD_READ_CDVD_CAPACITY	    0x25
+#define GPCMD_READ_CD			    0xbe
+#define GPCMD_READ_CD_MSF		    0xb9
+#define GPCMD_READ_DISC_INFO		    0x51
+#define GPCMD_READ_DVD_STRUCTURE	    0xad
+#define GPCMD_READ_FORMAT_CAPACITIES	    0x23
+#define GPCMD_READ_HEADER		    0x44
+#define GPCMD_READ_TRACK_RZONE_INFO	    0x52
+#define GPCMD_READ_SUBCHANNEL		    0x42
+#define GPCMD_READ_TOC_PMA_ATIP		    0x43
+#define GPCMD_REPAIR_RZONE_TRACK	    0x58
+#define GPCMD_REPORT_KEY		    0xa4
+#define GPCMD_REQUEST_SENSE		    0x03
+#define GPCMD_RESERVE_RZONE_TRACK	    0x53
+#define GPCMD_SEND_CUE_SHEET		    0x5d
+#define GPCMD_SCAN			    0xba
+#define GPCMD_SEEK			    0x2b
+#define GPCMD_SEND_DVD_STRUCTURE	    0xbf
+#define GPCMD_SEND_EVENT		    0xa2
+#define GPCMD_SEND_KEY			    0xa3
+#define GPCMD_SEND_OPC			    0x54
+#define GPCMD_SET_READ_AHEAD		    0xa7
+#define GPCMD_SET_STREAMING		    0xb6
+#define GPCMD_START_STOP_UNIT		    0x1b
+#define GPCMD_STOP_PLAY_SCAN		    0x4e
+#define GPCMD_TEST_UNIT_READY		    0x00
+#define GPCMD_VERIFY_10			    0x2f
+#define GPCMD_WRITE_10			    0x2a
+#define GPCMD_WRITE_12			    0xaa
+#define GPCMD_WRITE_AND_VERIFY_10	    0x2e
+#define GPCMD_WRITE_BUFFER		    0x3b
+/* This is listed as optional in ATAPI 2.6, but is (curiously) 
+ * missing from Mt. Fuji, Table 57.  It _is_ mentioned in Mt. Fuji
+ * Table 377 as an MMC command for SCSi devices though...  Most ATAPI
+ * drives support it. */
+#define GPCMD_SET_SPEED			    0xbb
+/* This seems to be a SCSI specific CD-ROM opcode 
+ * to play data at track/index */
+#define GPCMD_PLAYAUDIO_TI		    0x48
+/*
+ * From MS Media Status Notification Support Specification. For
+ * older drives only.
+ */
+#define GPCMD_GET_MEDIA_STATUS		    0xda
+
+/* Mode page codes for mode sense/set */
+#define GPMODE_VENDOR_PAGE		0x00
+#define GPMODE_R_W_ERROR_PAGE		0x01
+#define GPMODE_WRITE_PARMS_PAGE		0x05
+#define GPMODE_WCACHING_PAGE		0x08
+#define GPMODE_AUDIO_CTL_PAGE		0x0e
+#define GPMODE_POWER_PAGE		0x1a
+#define GPMODE_FAULT_FAIL_PAGE		0x1c
+#define GPMODE_TO_PROTECT_PAGE		0x1d
+#define GPMODE_CAPABILITIES_PAGE	0x2a
+#define GPMODE_ALL_PAGES		0x3f
+/* Not in Mt. Fuji, but in ATAPI 2.6 -- deprecated now in favor
+ * of MODE_SENSE_POWER_PAGE */
+#define GPMODE_CDROM_PAGE		0x0d
+
+
+
+/* DVD struct types */
+#define DVD_STRUCT_PHYSICAL	0x00
+#define DVD_STRUCT_COPYRIGHT	0x01
+#define DVD_STRUCT_DISCKEY	0x02
+#define DVD_STRUCT_BCA		0x03
+#define DVD_STRUCT_MANUFACT	0x04
+
+struct dvd_layer {
+	__u8 book_version	: 4;
+	__u8 book_type		: 4;
+	__u8 min_rate		: 4;
+	__u8 disc_size		: 4;
+	__u8 layer_type		: 4;
+	__u8 track_path		: 1;
+	__u8 nlayers		: 2;
+	__u8 track_density	: 4;
+	__u8 linear_density	: 4;
+	__u8 bca		: 1;
+	__u32 start_sector;
+	__u32 end_sector;
+	__u32 end_sector_l0;
+};
+
+#define DVD_LAYERS	4
+
+struct dvd_physical {
+	__u8 type;
+	__u8 layer_num;
+	struct dvd_layer layer[DVD_LAYERS];
+};
+
+struct dvd_copyright {
+	__u8 type;
+
+	__u8 layer_num;
+	__u8 cpst;
+	__u8 rmi;
+};
+
+struct dvd_disckey {
+	__u8 type;
+
+	unsigned agid		: 2;
+	__u8 value[2048];
+};
+
+struct dvd_bca {
+	__u8 type;
+
+	int len;
+	__u8 value[188];
+};
+
+struct dvd_manufact {
+	__u8 type;
+
+	__u8 layer_num;
+	int len;
+	__u8 value[2048];
+};
+
+typedef union {
+	__u8 type;
+
+	struct dvd_physical	physical;
+	struct dvd_copyright	copyright;
+	struct dvd_disckey	disckey;
+	struct dvd_bca		bca;
+	struct dvd_manufact	manufact;
+} dvd_struct;
+
+/*
+ * DVD authentication ioctl
+ */
+
+/* Authentication states */
+#define DVD_LU_SEND_AGID	0
+#define DVD_HOST_SEND_CHALLENGE	1
+#define DVD_LU_SEND_KEY1	2
+#define DVD_LU_SEND_CHALLENGE	3
+#define DVD_HOST_SEND_KEY2	4
+
+/* Termination states */
+#define DVD_AUTH_ESTABLISHED	5
+#define DVD_AUTH_FAILURE	6
+
+/* Other functions */
+#define DVD_LU_SEND_TITLE_KEY	7
+#define DVD_LU_SEND_ASF		8
+#define DVD_INVALIDATE_AGID	9
+#define DVD_LU_SEND_RPC_STATE	10
+#define DVD_HOST_SEND_RPC_STATE	11
+
+/* State data */
+typedef __u8 dvd_key[5];		/* 40-bit value, MSB is first elem. */
+typedef __u8 dvd_challenge[10];	/* 80-bit value, MSB is first elem. */
+
+struct dvd_lu_send_agid {
+	__u8 type;
+	unsigned agid		: 2;
+};
+
+struct dvd_host_send_challenge {
+	__u8 type;
+	unsigned agid		: 2;
+
+	dvd_challenge chal;
+};
+
+struct dvd_send_key {
+	__u8 type;
+	unsigned agid		: 2;
+
+	dvd_key key;
+};
+
+struct dvd_lu_send_challenge {
+	__u8 type;
+	unsigned agid		: 2;
+
+	dvd_challenge chal;
+};
+
+#define DVD_CPM_NO_COPYRIGHT	0
+#define DVD_CPM_COPYRIGHTED	1
+
+#define DVD_CP_SEC_NONE		0
+#define DVD_CP_SEC_EXIST	1
+
+#define DVD_CGMS_UNRESTRICTED	0
+#define DVD_CGMS_SINGLE		2
+#define DVD_CGMS_RESTRICTED	3
+
+struct dvd_lu_send_title_key {
+	__u8 type;
+	unsigned agid		: 2;
+
+	dvd_key title_key;
+	int lba;
+	unsigned cpm		: 1;
+	unsigned cp_sec		: 1;
+	unsigned cgms		: 2;
+};
+
+struct dvd_lu_send_asf {
+	__u8 type;
+	unsigned agid		: 2;
+
+	unsigned asf		: 1;
+};
+
+struct dvd_host_send_rpcstate {
+	__u8 type;
+	__u8 pdrc;
+};
+
+struct dvd_lu_send_rpcstate {
+	__u8 type		: 2;
+	__u8 vra		: 3;
+	__u8 ucca		: 3;
+	__u8 region_mask;
+	__u8 rpc_scheme;
+};
+
+typedef union {
+	__u8 type;
+
+	struct dvd_lu_send_agid		lsa;
+	struct dvd_host_send_challenge	hsc;
+	struct dvd_send_key		lsk;
+	struct dvd_lu_send_challenge	lsc;
+	struct dvd_send_key		hsk;
+	struct dvd_lu_send_title_key	lstk;
+	struct dvd_lu_send_asf		lsasf;
+	struct dvd_host_send_rpcstate	hrpcs;
+	struct dvd_lu_send_rpcstate	lrpcs;
+} dvd_authinfo;
+
+struct request_sense {
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 valid		: 1;
+	__u8 error_code		: 7;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 error_code		: 7;
+	__u8 valid		: 1;
+#endif
+	__u8 segment_number;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved1		: 2;
+	__u8 ili		: 1;
+	__u8 reserved2		: 1;
+	__u8 sense_key		: 4;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 sense_key		: 4;
+	__u8 reserved2		: 1;
+	__u8 ili		: 1;
+	__u8 reserved1		: 2;
+#endif
+	__u8 information[4];
+	__u8 add_sense_len;
+	__u8 command_info[4];
+	__u8 asc;
+	__u8 ascq;
+	__u8 fruc;
+	__u8 sks[3];
+	__u8 asb[46];
+};
+
+/*
+ * feature profile
+ */
+#define CDF_RWRT	0x0020	/* "Random Writable" */
+#define CDF_HWDM	0x0024	/* "Hardware Defect Management" */
+#define CDF_MRW 	0x0028
+
+/*
+ * media status bits
+ */
+#define CDM_MRW_NOTMRW			0
+#define CDM_MRW_BGFORMAT_INACTIVE	1
+#define CDM_MRW_BGFORMAT_ACTIVE		2
+#define CDM_MRW_BGFORMAT_COMPLETE	3
+
+/*
+ * mrw address spaces
+ */
+#define MRW_LBA_DMA			0
+#define MRW_LBA_GAA			1
+
+/*
+ * mrw mode pages (first is deprecated) -- probed at init time and
+ * cdi->mrw_mode_page is set
+ */
+#define MRW_MODE_PC_PRE1		0x2c
+#define MRW_MODE_PC			0x03
+
+struct mrw_feature_desc {
+	__be16 feature_code;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved1		: 2;
+	__u8 feature_version	: 4;
+	__u8 persistent		: 1;
+	__u8 curr		: 1;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 curr		: 1;
+	__u8 persistent		: 1;
+	__u8 feature_version	: 4;
+	__u8 reserved1		: 2;
+#endif
+	__u8 add_len;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved2		: 7;
+	__u8 write		: 1;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 write		: 1;
+	__u8 reserved2		: 7;
+#endif
+	__u8 reserved3;
+	__u8 reserved4;
+	__u8 reserved5;
+};
+
+/* cf. mmc4r02g.pdf 5.3.10 Random Writable Feature (0020h) pg 197 of 635 */
+struct rwrt_feature_desc {
+	__be16 feature_code;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved1		: 2;
+	__u8 feature_version	: 4;
+	__u8 persistent		: 1;
+	__u8 curr		: 1;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 curr		: 1;
+	__u8 persistent		: 1;
+	__u8 feature_version	: 4;
+	__u8 reserved1		: 2;
+#endif
+	__u8 add_len;
+	__u32 last_lba;
+	__u32 block_size;
+	__u16 blocking;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved2		: 7;
+	__u8 page_present	: 1;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 page_present	: 1;
+	__u8 reserved2		: 7;
+#endif
+	__u8 reserved3;
+};
+
+typedef struct {
+	__be16 disc_information_length;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved1			: 3;
+        __u8 erasable			: 1;
+        __u8 border_status		: 2;
+        __u8 disc_status		: 2;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+        __u8 disc_status		: 2;
+        __u8 border_status		: 2;
+        __u8 erasable			: 1;
+	__u8 reserved1			: 3;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+	__u8 n_first_track;
+	__u8 n_sessions_lsb;
+	__u8 first_track_lsb;
+	__u8 last_track_lsb;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 did_v			: 1;
+        __u8 dbc_v			: 1;
+        __u8 uru			: 1;
+        __u8 reserved2			: 2;
+	__u8 dbit			: 1;
+	__u8 mrw_status			: 2;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 mrw_status			: 2;
+	__u8 dbit			: 1;
+        __u8 reserved2			: 2;
+        __u8 uru			: 1;
+        __u8 dbc_v			: 1;
+	__u8 did_v			: 1;
+#endif
+	__u8 disc_type;
+	__u8 n_sessions_msb;
+	__u8 first_track_msb;
+	__u8 last_track_msb;
+	__u32 disc_id;
+	__u32 lead_in;
+	__u32 lead_out;
+	__u8 disc_bar_code[8];
+	__u8 reserved3;
+	__u8 n_opc;
+} disc_information;
+
+typedef struct {
+	__be16 track_information_length;
+	__u8 track_lsb;
+	__u8 session_lsb;
+	__u8 reserved1;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved2			: 2;
+        __u8 damage			: 1;
+        __u8 copy			: 1;
+        __u8 track_mode			: 4;
+	__u8 rt				: 1;
+	__u8 blank			: 1;
+	__u8 packet			: 1;
+	__u8 fp				: 1;
+	__u8 data_mode			: 4;
+	__u8 reserved3			: 6;
+	__u8 lra_v			: 1;
+	__u8 nwa_v			: 1;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+        __u8 track_mode			: 4;
+        __u8 copy			: 1;
+        __u8 damage			: 1;
+	__u8 reserved2			: 2;
+	__u8 data_mode			: 4;
+	__u8 fp				: 1;
+	__u8 packet			: 1;
+	__u8 blank			: 1;
+	__u8 rt				: 1;
+	__u8 nwa_v			: 1;
+	__u8 lra_v			: 1;
+	__u8 reserved3			: 6;
+#endif
+	__be32 track_start;
+	__be32 next_writable;
+	__be32 free_blocks;
+	__be32 fixed_packet_size;
+	__be32 track_size;
+	__be32 last_rec_address;
+} track_information;
+
+struct feature_header {
+	__u32 data_len;
+	__u8 reserved1;
+	__u8 reserved2;
+	__u16 curr_profile;
+};
+
+struct mode_page_header {
+	__be16 mode_data_length;
+	__u8 medium_type;
+	__u8 reserved1;
+	__u8 reserved2;
+	__u8 reserved3;
+	__be16 desc_length;
+};
+
+
+#endif /* _UAPI_LINUX_CDROM_H */
diff --git a/include/uapi/linux/cgroupstats.h b/include/uapi/linux/cgroupstats.h
new file mode 100644
index 00000000000..3753c33160d
--- /dev/null
+++ b/include/uapi/linux/cgroupstats.h
@@ -0,0 +1,71 @@
+/* cgroupstats.h - exporting per-cgroup statistics
+ *
+ * Copyright IBM Corporation, 2007
+ * Author Balbir Singh <balbir@linux.vnet.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _LINUX_CGROUPSTATS_H
+#define _LINUX_CGROUPSTATS_H
+
+#include <linux/types.h>
+#include <linux/taskstats.h>
+
+/*
+ * Data shared between user space and kernel space on a per cgroup
+ * basis. This data is shared using taskstats.
+ *
+ * Most of these states are derived by looking at the task->state value
+ * For the nr_io_wait state, a flag in the delay accounting structure
+ * indicates that the task is waiting on IO
+ *
+ * Each member is aligned to a 8 byte boundary.
+ */
+struct cgroupstats {
+	__u64	nr_sleeping;		/* Number of tasks sleeping */
+	__u64	nr_running;		/* Number of tasks running */
+	__u64	nr_stopped;		/* Number of tasks in stopped state */
+	__u64	nr_uninterruptible;	/* Number of tasks in uninterruptible */
+					/* state */
+	__u64	nr_io_wait;		/* Number of tasks waiting on IO */
+};
+
+/*
+ * Commands sent from userspace
+ * Not versioned. New commands should only be inserted at the enum's end
+ * prior to __CGROUPSTATS_CMD_MAX
+ */
+
+enum {
+	CGROUPSTATS_CMD_UNSPEC = __TASKSTATS_CMD_MAX,	/* Reserved */
+	CGROUPSTATS_CMD_GET,		/* user->kernel request/get-response */
+	CGROUPSTATS_CMD_NEW,		/* kernel->user event */
+	__CGROUPSTATS_CMD_MAX,
+};
+
+#define CGROUPSTATS_CMD_MAX (__CGROUPSTATS_CMD_MAX - 1)
+
+enum {
+	CGROUPSTATS_TYPE_UNSPEC = 0,	/* Reserved */
+	CGROUPSTATS_TYPE_CGROUP_STATS,	/* contains name + stats */
+	__CGROUPSTATS_TYPE_MAX,
+};
+
+#define CGROUPSTATS_TYPE_MAX (__CGROUPSTATS_TYPE_MAX - 1)
+
+enum {
+	CGROUPSTATS_CMD_ATTR_UNSPEC = 0,
+	CGROUPSTATS_CMD_ATTR_FD,
+	__CGROUPSTATS_CMD_ATTR_MAX,
+};
+
+#define CGROUPSTATS_CMD_ATTR_MAX (__CGROUPSTATS_CMD_ATTR_MAX - 1)
+
+#endif /* _LINUX_CGROUPSTATS_H */
diff --git a/include/uapi/linux/chio.h b/include/uapi/linux/chio.h
new file mode 100644
index 00000000000..d9bac7f9728
--- /dev/null
+++ b/include/uapi/linux/chio.h
@@ -0,0 +1,168 @@
+/*
+ * ioctl interface for the scsi media changer driver
+ */
+
+/* changer element types */
+#define CHET_MT   0	/* media transport element (robot) */
+#define CHET_ST   1	/* storage element (media slots) */
+#define CHET_IE   2	/* import/export element */
+#define CHET_DT   3	/* data transfer element (tape/cdrom/whatever) */
+#define CHET_V1   4	/* vendor specific #1 */
+#define CHET_V2   5	/* vendor specific #2 */
+#define CHET_V3   6	/* vendor specific #3 */
+#define CHET_V4   7	/* vendor specific #4 */
+
+
+/*
+ * CHIOGPARAMS
+ *    query changer properties
+ *
+ * CHIOVGPARAMS
+ *    query vendor-specific element types
+ *
+ *    accessing elements works by specifing type and unit of the element.
+ *    for example, storage elements are addressed with type = CHET_ST and
+ *    unit = 0 .. cp_nslots-1
+ *
+ */
+struct changer_params {
+	int cp_curpicker;  /* current transport element */
+	int cp_npickers;   /* number of transport elements      (CHET_MT) */
+	int cp_nslots;     /* number of storage elements        (CHET_ST) */
+	int cp_nportals;   /* number of import/export elements  (CHET_IE) */
+	int cp_ndrives;    /* number of data transfer elements  (CHET_DT) */
+};
+struct changer_vendor_params {
+	int  cvp_n1;       /* number of vendor specific elems   (CHET_V1) */
+	char cvp_label1[16];
+	int  cvp_n2;       /* number of vendor specific elems   (CHET_V2) */
+	char cvp_label2[16];
+	int  cvp_n3;       /* number of vendor specific elems   (CHET_V3) */
+	char cvp_label3[16];
+	int  cvp_n4;       /* number of vendor specific elems   (CHET_V4) */
+	char cvp_label4[16];
+	int  reserved[8];
+};
+
+
+/*
+ * CHIOMOVE
+ *    move a medium from one element to another
+ */
+struct changer_move {
+	int cm_fromtype;	/* type/unit of source element */
+	int cm_fromunit;	
+	int cm_totype;	/* type/unit of destination element */
+	int cm_tounit;
+	int cm_flags;
+};
+#define CM_INVERT   1   /* flag: rotate media (for double-sided like MOD) */
+
+
+/*
+ * CHIOEXCHANGE
+ *    move one medium from element #1 to element #2,
+ *    and another one from element #2 to element #3.
+ *    element #1 and #3 are allowed to be identical.
+ */
+struct changer_exchange {
+	int ce_srctype;	    /* type/unit of element #1 */
+	int ce_srcunit;
+	int ce_fdsttype;    /* type/unit of element #2 */
+	int ce_fdstunit;
+	int ce_sdsttype;    /* type/unit of element #3 */
+	int ce_sdstunit;
+	int ce_flags;
+};
+#define CE_INVERT1   1
+#define CE_INVERT2   2
+
+
+/*
+ * CHIOPOSITION
+ *    move the transport element (robot arm) to a specific element.
+ */
+struct changer_position {
+	int cp_type;
+	int cp_unit;
+	int cp_flags;
+};
+#define CP_INVERT   1
+
+
+/*
+ * CHIOGSTATUS
+ *    get element status for all elements of a specific type
+ */
+struct changer_element_status {
+	int             ces_type;
+	unsigned char   __user *ces_data;
+};
+#define CESTATUS_FULL     0x01 /* full */
+#define CESTATUS_IMPEXP   0x02	/* media was imported (inserted by sysop) */
+#define CESTATUS_EXCEPT   0x04	/* error condition */
+#define CESTATUS_ACCESS   0x08	/* access allowed */
+#define CESTATUS_EXENAB   0x10	/* element can export media */
+#define CESTATUS_INENAB   0x20	/* element can import media */
+
+
+/*
+ * CHIOGELEM
+ *    get more detailed status information for a single element
+ */
+struct changer_get_element {
+	int	cge_type;	 /* type/unit */
+	int	cge_unit;
+	int	cge_status;      /* status */
+	int     cge_errno;       /* errno */
+	int     cge_srctype;     /* source element of the last move/exchange */
+	int     cge_srcunit;
+	int     cge_id;          /* scsi id  (for data transfer elements) */
+	int     cge_lun;         /* scsi lun (for data transfer elements) */
+	char    cge_pvoltag[36]; /* primary volume tag */
+	char    cge_avoltag[36]; /* alternate volume tag */
+	int     cge_flags;
+};
+/* flags */
+#define CGE_ERRNO     0x01       /* errno available       */
+#define CGE_INVERT    0x02       /* media inverted        */
+#define CGE_SRC       0x04       /* media src available   */
+#define CGE_IDLUN     0x08       /* ID+LUN available      */
+#define CGE_PVOLTAG   0x10       /* primary volume tag available */
+#define CGE_AVOLTAG   0x20       /* alternate volume tag available */
+
+
+/*
+ * CHIOSVOLTAG
+ *    set volume tag
+ */
+struct changer_set_voltag {
+	int	csv_type;	 /* type/unit */
+	int	csv_unit;
+	char    csv_voltag[36];  /* volume tag */
+	int     csv_flags;
+};
+#define CSV_PVOLTAG   0x01       /* primary volume tag */
+#define CSV_AVOLTAG   0x02       /* alternate volume tag */
+#define CSV_CLEARTAG  0x04       /* clear volume tag */
+
+/* ioctls */
+#define CHIOMOVE       _IOW('c', 1,struct changer_move)
+#define CHIOEXCHANGE   _IOW('c', 2,struct changer_exchange)
+#define CHIOPOSITION   _IOW('c', 3,struct changer_position)
+#define CHIOGPICKER    _IOR('c', 4,int)                        /* not impl. */
+#define CHIOSPICKER    _IOW('c', 5,int)                        /* not impl. */
+#define CHIOGPARAMS    _IOR('c', 6,struct changer_params)
+#define CHIOGSTATUS    _IOW('c', 8,struct changer_element_status)
+#define CHIOGELEM      _IOW('c',16,struct changer_get_element)
+#define CHIOINITELEM   _IO('c',17)
+#define CHIOSVOLTAG    _IOW('c',18,struct changer_set_voltag)
+#define CHIOGVPARAMS   _IOR('c',19,struct changer_vendor_params)
+
+/* ---------------------------------------------------------------------- */
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/include/uapi/linux/cm4000_cs.h b/include/uapi/linux/cm4000_cs.h
new file mode 100644
index 00000000000..bc51f77db91
--- /dev/null
+++ b/include/uapi/linux/cm4000_cs.h
@@ -0,0 +1,62 @@
+#ifndef _UAPI_CM4000_H_
+#define _UAPI_CM4000_H_
+
+#include <linux/types.h>
+
+#define	MAX_ATR			33
+
+#define	CM4000_MAX_DEV		4
+
+/* those two structures are passed via ioctl() from/to userspace.  They are
+ * used by existing userspace programs, so I kepth the awkward "bIFSD" naming
+ * not to break compilation of userspace apps. -HW */
+
+typedef struct atreq {
+	__s32 atr_len;
+	unsigned char atr[64];
+	__s32 power_act;
+	unsigned char bIFSD;
+	unsigned char bIFSC;
+} atreq_t;
+
+
+/* what is particularly stupid in the original driver is the arch-dependent
+ * member sizes. This leads to CONFIG_COMPAT breakage, since 32bit userspace
+ * will lay out the structure members differently than the 64bit kernel.
+ *
+ * I've changed "ptsreq.protocol" from "unsigned long" to "__u32".
+ * On 32bit this will make no difference.  With 64bit kernels, it will make
+ * 32bit apps work, too.
+ */
+
+typedef struct ptsreq {
+	__u32 protocol; /*T=0: 2^0, T=1:  2^1*/
+ 	unsigned char flags;
+ 	unsigned char pts1;
+ 	unsigned char pts2;
+	unsigned char pts3;
+} ptsreq_t;
+
+#define	CM_IOC_MAGIC		'c'
+#define	CM_IOC_MAXNR	        255
+
+#define	CM_IOCGSTATUS		_IOR (CM_IOC_MAGIC, 0, unsigned char *)
+#define	CM_IOCGATR		_IOWR(CM_IOC_MAGIC, 1, atreq_t *)
+#define	CM_IOCSPTS		_IOW (CM_IOC_MAGIC, 2, ptsreq_t *)
+#define	CM_IOCSRDR		_IO  (CM_IOC_MAGIC, 3)
+#define CM_IOCARDOFF            _IO  (CM_IOC_MAGIC, 4)
+
+#define CM_IOSDBGLVL            _IOW(CM_IOC_MAGIC, 250, int*)
+
+/* card and device states */
+#define	CM_CARD_INSERTED		0x01
+#define	CM_CARD_POWERED			0x02
+#define	CM_ATR_PRESENT			0x04
+#define	CM_ATR_VALID	 		0x08
+#define	CM_STATE_VALID			0x0f
+/* extra info only from CM4000 */
+#define	CM_NO_READER			0x10
+#define	CM_BAD_CARD			0x20
+
+
+#endif /* _UAPI_CM4000_H_ */
diff --git a/include/uapi/linux/cn_proc.h b/include/uapi/linux/cn_proc.h
new file mode 100644
index 00000000000..0d7b49973bb
--- /dev/null
+++ b/include/uapi/linux/cn_proc.h
@@ -0,0 +1,121 @@
+/*
+ * cn_proc.h - process events connector
+ *
+ * Copyright (C) Matt Helsley, IBM Corp. 2005
+ * Based on cn_fork.h by Nguyen Anh Quynh and Guillaume Thouvenin
+ * Copyright (C) 2005 Nguyen Anh Quynh <aquynh@gmail.com>
+ * Copyright (C) 2005 Guillaume Thouvenin <guillaume.thouvenin@bull.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _UAPICN_PROC_H
+#define _UAPICN_PROC_H
+
+#include <linux/types.h>
+
+/*
+ * Userspace sends this enum to register with the kernel that it is listening
+ * for events on the connector.
+ */
+enum proc_cn_mcast_op {
+	PROC_CN_MCAST_LISTEN = 1,
+	PROC_CN_MCAST_IGNORE = 2
+};
+
+/*
+ * From the user's point of view, the process
+ * ID is the thread group ID and thread ID is the internal
+ * kernel "pid". So, fields are assigned as follow:
+ *
+ *  In user space     -  In  kernel space
+ *
+ * parent process ID  =  parent->tgid
+ * parent thread  ID  =  parent->pid
+ * child  process ID  =  child->tgid
+ * child  thread  ID  =  child->pid
+ */
+
+struct proc_event {
+	enum what {
+		/* Use successive bits so the enums can be used to record
+		 * sets of events as well
+		 */
+		PROC_EVENT_NONE = 0x00000000,
+		PROC_EVENT_FORK = 0x00000001,
+		PROC_EVENT_EXEC = 0x00000002,
+		PROC_EVENT_UID  = 0x00000004,
+		PROC_EVENT_GID  = 0x00000040,
+		PROC_EVENT_SID  = 0x00000080,
+		PROC_EVENT_PTRACE = 0x00000100,
+		PROC_EVENT_COMM = 0x00000200,
+		/* "next" should be 0x00000400 */
+		/* "last" is the last process event: exit */
+		PROC_EVENT_EXIT = 0x80000000
+	} what;
+	__u32 cpu;
+	__u64 __attribute__((aligned(8))) timestamp_ns;
+		/* Number of nano seconds since system boot */
+	union { /* must be last field of proc_event struct */
+		struct {
+			__u32 err;
+		} ack;
+
+		struct fork_proc_event {
+			__kernel_pid_t parent_pid;
+			__kernel_pid_t parent_tgid;
+			__kernel_pid_t child_pid;
+			__kernel_pid_t child_tgid;
+		} fork;
+
+		struct exec_proc_event {
+			__kernel_pid_t process_pid;
+			__kernel_pid_t process_tgid;
+		} exec;
+
+		struct id_proc_event {
+			__kernel_pid_t process_pid;
+			__kernel_pid_t process_tgid;
+			union {
+				__u32 ruid; /* task uid */
+				__u32 rgid; /* task gid */
+			} r;
+			union {
+				__u32 euid;
+				__u32 egid;
+			} e;
+		} id;
+
+		struct sid_proc_event {
+			__kernel_pid_t process_pid;
+			__kernel_pid_t process_tgid;
+		} sid;
+
+		struct ptrace_proc_event {
+			__kernel_pid_t process_pid;
+			__kernel_pid_t process_tgid;
+			__kernel_pid_t tracer_pid;
+			__kernel_pid_t tracer_tgid;
+		} ptrace;
+
+		struct comm_proc_event {
+			__kernel_pid_t process_pid;
+			__kernel_pid_t process_tgid;
+			char           comm[16];
+		} comm;
+
+		struct exit_proc_event {
+			__kernel_pid_t process_pid;
+			__kernel_pid_t process_tgid;
+			__u32 exit_code, exit_signal;
+		} exit;
+	} event_data;
+};
+
+#endif /* _UAPICN_PROC_H */
diff --git a/include/uapi/linux/coda.h b/include/uapi/linux/coda.h
new file mode 100644
index 00000000000..695fade33c6
--- /dev/null
+++ b/include/uapi/linux/coda.h
@@ -0,0 +1,741 @@
+/* 
+   You may distribute this file under either of the two licenses that
+   follow at your discretion.
+*/
+
+/* BLURB lgpl
+
+                           Coda File System
+                              Release 5
+
+          Copyright (c) 1987-1999 Carnegie Mellon University
+                  Additional copyrights listed below
+
+This code is distributed "AS IS" without warranty of any kind under
+the terms of the GNU Library General Public Licence Version 2, as
+shown in the file LICENSE, or under the license shown below. The
+technical and financial contributors to Coda are listed in the file
+CREDITS.
+
+                        Additional copyrights 
+*/
+
+/*
+
+            Coda: an Experimental Distributed File System
+                             Release 4.0
+
+          Copyright (c) 1987-1999 Carnegie Mellon University
+                         All Rights Reserved
+
+Permission  to  use, copy, modify and distribute this software and its
+documentation is hereby granted,  provided  that  both  the  copyright
+notice  and  this  permission  notice  appear  in  all  copies  of the
+software, derivative works or  modified  versions,  and  any  portions
+thereof, and that both notices appear in supporting documentation, and
+that credit is given to Carnegie Mellon University  in  all  documents
+and publicity pertaining to direct or indirect use of this code or its
+derivatives.
+
+CODA IS AN EXPERIMENTAL SOFTWARE SYSTEM AND IS  KNOWN  TO  HAVE  BUGS,
+SOME  OF  WHICH MAY HAVE SERIOUS CONSEQUENCES.  CARNEGIE MELLON ALLOWS
+FREE USE OF THIS SOFTWARE IN ITS "AS IS" CONDITION.   CARNEGIE  MELLON
+DISCLAIMS  ANY  LIABILITY  OF  ANY  KIND  FOR  ANY  DAMAGES WHATSOEVER
+RESULTING DIRECTLY OR INDIRECTLY FROM THE USE OF THIS SOFTWARE  OR  OF
+ANY DERIVATIVE WORK.
+
+Carnegie  Mellon  encourages  users  of  this  software  to return any
+improvements or extensions that  they  make,  and  to  grant  Carnegie
+Mellon the rights to redistribute these changes without encumbrance.
+*/
+
+/*
+ *
+ * Based on cfs.h from Mach, but revamped for increased simplicity.
+ * Linux modifications by 
+ * Peter Braam, Aug 1996
+ */
+
+#ifndef _UAPI_CODA_HEADER_
+#define _UAPI_CODA_HEADER_
+
+
+/* Catch new _KERNEL defn for NetBSD and DJGPP/__CYGWIN32__ */
+#if defined(__NetBSD__) || \
+  ((defined(DJGPP) || defined(__CYGWIN32__)) && !defined(KERNEL))
+#include <sys/types.h>
+#endif 
+
+#ifndef CODA_MAXSYMLINKS
+#define CODA_MAXSYMLINKS 10
+#endif
+
+#if defined(DJGPP) || defined(__CYGWIN32__)
+#ifdef KERNEL
+typedef unsigned long u_long;
+typedef unsigned int u_int;
+typedef unsigned short u_short;
+typedef u_long ino_t;
+typedef u_long dev_t;
+typedef void * caddr_t;
+#ifdef DOS
+typedef unsigned __int64 u_quad_t;
+#else 
+typedef unsigned long long u_quad_t;
+#endif
+
+#define inline
+
+struct timespec {
+        long       ts_sec;
+        long       ts_nsec;
+};
+#else  /* DJGPP but not KERNEL */
+#include <sys/time.h>
+typedef unsigned long long u_quad_t;
+#endif /* !KERNEL */
+#endif /* !DJGPP */
+
+
+#if defined(__linux__)
+#include <linux/time.h>
+#define cdev_t u_quad_t
+#ifndef __KERNEL__
+#if !defined(_UQUAD_T_) && (!defined(__GLIBC__) || __GLIBC__ < 2)
+#define _UQUAD_T_ 1
+typedef unsigned long long u_quad_t;
+#endif
+#endif /* __KERNEL__ */
+#else
+#define cdev_t dev_t
+#endif
+
+#ifdef __CYGWIN32__
+struct timespec {
+        time_t  tv_sec;         /* seconds */
+        long    tv_nsec;        /* nanoseconds */
+};
+#endif
+
+#ifndef __BIT_TYPES_DEFINED__
+#define __BIT_TYPES_DEFINED__
+typedef signed char	      int8_t;
+typedef unsigned char	    u_int8_t;
+typedef short		     int16_t;
+typedef unsigned short	   u_int16_t;
+typedef int		     int32_t;
+typedef unsigned int	   u_int32_t;
+#endif
+
+
+/*
+ * Cfs constants
+ */
+#define CODA_MAXNAMLEN   255
+#define CODA_MAXPATHLEN  1024
+#define CODA_MAXSYMLINK  10
+
+/* these are Coda's version of O_RDONLY etc combinations
+ * to deal with VFS open modes
+ */
+#define	C_O_READ	0x001
+#define	C_O_WRITE       0x002
+#define C_O_TRUNC       0x010
+#define C_O_EXCL	0x100
+#define C_O_CREAT	0x200
+
+/* these are to find mode bits in Venus */ 
+#define C_M_READ  00400
+#define C_M_WRITE 00200
+
+/* for access Venus will use */
+#define C_A_C_OK    8               /* Test for writing upon create.  */
+#define C_A_R_OK    4               /* Test for read permission.  */
+#define C_A_W_OK    2               /* Test for write permission.  */
+#define C_A_X_OK    1               /* Test for execute permission.  */
+#define C_A_F_OK    0               /* Test for existence.  */
+
+
+
+#ifndef _VENUS_DIRENT_T_
+#define _VENUS_DIRENT_T_ 1
+struct venus_dirent {
+        u_int32_t d_fileno;		/* file number of entry */
+        u_int16_t d_reclen;		/* length of this record */
+        u_int8_t  d_type;			/* file type, see below */
+        u_int8_t  d_namlen;		/* length of string in d_name */
+        char	  d_name[CODA_MAXNAMLEN + 1];/* name must be no longer than this */
+};
+#undef DIRSIZ
+#define DIRSIZ(dp)      ((sizeof (struct venus_dirent) - (CODA_MAXNAMLEN+1)) + \
+                         (((dp)->d_namlen+1 + 3) &~ 3))
+
+/*
+ * File types
+ */
+#define	CDT_UNKNOWN	 0
+#define	CDT_FIFO	 1
+#define	CDT_CHR		 2
+#define	CDT_DIR		 4
+#define	CDT_BLK		 6
+#define	CDT_REG		 8
+#define	CDT_LNK		10
+#define	CDT_SOCK	12
+#define	CDT_WHT		14
+
+/*
+ * Convert between stat structure types and directory types.
+ */
+#define	IFTOCDT(mode)	(((mode) & 0170000) >> 12)
+#define	CDTTOIF(dirtype)	((dirtype) << 12)
+
+#endif
+
+#ifndef _VUID_T_
+#define _VUID_T_
+typedef u_int32_t vuid_t;
+typedef u_int32_t vgid_t;
+#endif /*_VUID_T_ */
+
+struct CodaFid {
+	u_int32_t opaque[4];
+};
+
+#define coda_f2i(fid)\
+	(fid ? (fid->opaque[3] ^ (fid->opaque[2]<<10) ^ (fid->opaque[1]<<20) ^ fid->opaque[0]) : 0)
+
+#ifndef _VENUS_VATTR_T_
+#define _VENUS_VATTR_T_
+/*
+ * Vnode types.  VNON means no type.
+ */
+enum coda_vtype	{ C_VNON, C_VREG, C_VDIR, C_VBLK, C_VCHR, C_VLNK, C_VSOCK, C_VFIFO, C_VBAD };
+
+struct coda_vattr {
+	long     	va_type;	/* vnode type (for create) */
+	u_short		va_mode;	/* files access mode and type */
+	short		va_nlink;	/* number of references to file */
+	vuid_t		va_uid;		/* owner user id */
+	vgid_t		va_gid;		/* owner group id */
+	long		va_fileid;	/* file id */
+	u_quad_t	va_size;	/* file size in bytes */
+	long		va_blocksize;	/* blocksize preferred for i/o */
+	struct timespec	va_atime;	/* time of last access */
+	struct timespec	va_mtime;	/* time of last modification */
+	struct timespec	va_ctime;	/* time file changed */
+	u_long		va_gen;		/* generation number of file */
+	u_long		va_flags;	/* flags defined for file */
+	cdev_t	        va_rdev;	/* device special file represents */
+	u_quad_t	va_bytes;	/* bytes of disk space held by file */
+	u_quad_t	va_filerev;	/* file modification number */
+};
+
+#endif 
+
+/* structure used by CODA_STATFS for getting cache information from venus */
+struct coda_statfs {
+    int32_t f_blocks;
+    int32_t f_bfree;
+    int32_t f_bavail;
+    int32_t f_files;
+    int32_t f_ffree;
+};
+
+/*
+ * Kernel <--> Venus communications.
+ */
+
+#define CODA_ROOT	2
+#define CODA_OPEN_BY_FD	3
+#define CODA_OPEN	4
+#define CODA_CLOSE	5
+#define CODA_IOCTL	6
+#define CODA_GETATTR	7
+#define CODA_SETATTR	8
+#define CODA_ACCESS	9
+#define CODA_LOOKUP	10
+#define CODA_CREATE	11
+#define CODA_REMOVE	12
+#define CODA_LINK	13
+#define CODA_RENAME	14
+#define CODA_MKDIR	15
+#define CODA_RMDIR	16
+#define CODA_SYMLINK	18
+#define CODA_READLINK	19
+#define CODA_FSYNC	20
+#define CODA_VGET	22
+#define CODA_SIGNAL	23
+#define CODA_REPLACE	 24 /* DOWNCALL */
+#define CODA_FLUSH       25 /* DOWNCALL */
+#define CODA_PURGEUSER   26 /* DOWNCALL */
+#define CODA_ZAPFILE     27 /* DOWNCALL */
+#define CODA_ZAPDIR      28 /* DOWNCALL */
+#define CODA_PURGEFID    30 /* DOWNCALL */
+#define CODA_OPEN_BY_PATH 31
+#define CODA_RESOLVE     32
+#define CODA_REINTEGRATE 33
+#define CODA_STATFS	 34
+#define CODA_STORE	 35
+#define CODA_RELEASE	 36
+#define CODA_NCALLS 37
+
+#define DOWNCALL(opcode) (opcode >= CODA_REPLACE && opcode <= CODA_PURGEFID)
+
+#define VC_MAXDATASIZE	    8192
+#define VC_MAXMSGSIZE      sizeof(union inputArgs)+sizeof(union outputArgs) +\
+                            VC_MAXDATASIZE  
+
+#define CIOC_KERNEL_VERSION _IOWR('c', 10, size_t)
+
+#define CODA_KERNEL_VERSION 3 /* 128-bit file identifiers */
+
+/*
+ *        Venus <-> Coda  RPC arguments
+ */
+struct coda_in_hdr {
+    u_int32_t opcode;
+    u_int32_t unique;	    /* Keep multiple outstanding msgs distinct */
+    pid_t pid;
+    pid_t pgid;
+    vuid_t uid;
+};
+
+/* Really important that opcode and unique are 1st two fields! */
+struct coda_out_hdr {
+    u_int32_t opcode;
+    u_int32_t unique;	
+    u_int32_t result;
+};
+
+/* coda_root: NO_IN */
+struct coda_root_out {
+    struct coda_out_hdr oh;
+    struct CodaFid VFid;
+};
+
+struct coda_root_in {
+    struct coda_in_hdr in;
+};
+
+/* coda_open: */
+struct coda_open_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	flags;
+};
+
+struct coda_open_out {
+    struct coda_out_hdr oh;
+    cdev_t	dev;
+    ino_t	inode;
+};
+
+
+/* coda_store: */
+struct coda_store_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	flags;
+};
+
+struct coda_store_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_release: */
+struct coda_release_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	flags;
+};
+
+struct coda_release_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_close: */
+struct coda_close_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	flags;
+};
+
+struct coda_close_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_ioctl: */
+struct coda_ioctl_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	cmd;
+    int	len;
+    int	rwflag;
+    char *data;			/* Place holder for data. */
+};
+
+struct coda_ioctl_out {
+    struct coda_out_hdr oh;
+    int	len;
+    caddr_t	data;		/* Place holder for data. */
+};
+
+
+/* coda_getattr: */
+struct coda_getattr_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+};
+
+struct coda_getattr_out {
+    struct coda_out_hdr oh;
+    struct coda_vattr attr;
+};
+
+
+/* coda_setattr: NO_OUT */
+struct coda_setattr_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    struct coda_vattr attr;
+};
+
+struct coda_setattr_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_access: NO_OUT */
+struct coda_access_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	flags;
+};
+
+struct coda_access_out {
+    struct coda_out_hdr out;
+};
+
+
+/* lookup flags */
+#define CLU_CASE_SENSITIVE     0x01
+#define CLU_CASE_INSENSITIVE   0x02
+
+/* coda_lookup: */
+struct  coda_lookup_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int         name;		/* Place holder for data. */
+    int         flags;	
+};
+
+struct coda_lookup_out {
+    struct coda_out_hdr oh;
+    struct CodaFid VFid;
+    int	vtype;
+};
+
+
+/* coda_create: */
+struct coda_create_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    struct coda_vattr attr;
+    int excl;
+    int mode;
+    int 	name;		/* Place holder for data. */
+};
+
+struct coda_create_out {
+    struct coda_out_hdr oh;
+    struct CodaFid VFid;
+    struct coda_vattr attr;
+};
+
+
+/* coda_remove: NO_OUT */
+struct coda_remove_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int name;		/* Place holder for data. */
+};
+
+struct coda_remove_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_link: NO_OUT */
+struct coda_link_in {
+    struct coda_in_hdr ih;
+    struct CodaFid sourceFid;	/* cnode to link *to* */
+    struct CodaFid destFid;	/* Directory in which to place link */
+    int tname;		/* Place holder for data. */
+};
+
+struct coda_link_out {
+    struct coda_out_hdr out;
+};
+
+
+/* coda_rename: NO_OUT */
+struct coda_rename_in {
+    struct coda_in_hdr ih;
+    struct CodaFid sourceFid;
+    int 	srcname;
+    struct CodaFid destFid;
+    int 	destname;
+};
+
+struct coda_rename_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_mkdir: */
+struct coda_mkdir_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    struct coda_vattr attr;
+    int	   name;		/* Place holder for data. */
+};
+
+struct coda_mkdir_out {
+    struct coda_out_hdr oh;
+    struct CodaFid VFid;
+    struct coda_vattr attr;
+};
+
+
+/* coda_rmdir: NO_OUT */
+struct coda_rmdir_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int name;		/* Place holder for data. */
+};
+
+struct coda_rmdir_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_symlink: NO_OUT */
+struct coda_symlink_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;	/* Directory to put symlink in */
+    int srcname;
+    struct coda_vattr attr;
+    int tname;
+};
+
+struct coda_symlink_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_readlink: */
+struct coda_readlink_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+};
+
+struct coda_readlink_out {
+    struct coda_out_hdr oh;
+    int	count;
+    caddr_t	data;		/* Place holder for data. */
+};
+
+
+/* coda_fsync: NO_OUT */
+struct coda_fsync_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+};
+
+struct coda_fsync_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_vget: */
+struct coda_vget_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+};
+
+struct coda_vget_out {
+    struct coda_out_hdr oh;
+    struct CodaFid VFid;
+    int	vtype;
+};
+
+
+/* CODA_SIGNAL is out-of-band, doesn't need data. */
+/* CODA_INVALIDATE is a venus->kernel call */
+/* CODA_FLUSH is a venus->kernel call */
+
+/* coda_purgeuser: */
+/* CODA_PURGEUSER is a venus->kernel call */
+struct coda_purgeuser_out {
+    struct coda_out_hdr oh;
+    vuid_t uid;
+};
+
+/* coda_zapfile: */
+/* CODA_ZAPFILE is a venus->kernel call */
+struct coda_zapfile_out {  
+    struct coda_out_hdr oh;
+    struct CodaFid CodaFid;
+};
+
+/* coda_zapdir: */
+/* CODA_ZAPDIR is a venus->kernel call */	
+struct coda_zapdir_out {	  
+    struct coda_out_hdr oh;
+    struct CodaFid CodaFid;
+};
+
+/* coda_purgefid: */
+/* CODA_PURGEFID is a venus->kernel call */	
+struct coda_purgefid_out { 
+    struct coda_out_hdr oh;
+    struct CodaFid CodaFid;
+};
+
+/* coda_replace: */
+/* CODA_REPLACE is a venus->kernel call */	
+struct coda_replace_out { /* coda_replace is a venus->kernel call */
+    struct coda_out_hdr oh;
+    struct CodaFid NewFid;
+    struct CodaFid OldFid;
+};
+
+/* coda_open_by_fd: */
+struct coda_open_by_fd_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int        flags;
+};
+
+struct coda_open_by_fd_out {
+    struct coda_out_hdr oh;
+    int fd;
+
+#ifdef __KERNEL__
+    struct file *fh; /* not passed from userspace but used in-kernel only */
+#endif
+};
+
+/* coda_open_by_path: */
+struct coda_open_by_path_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	flags;
+};
+
+struct coda_open_by_path_out {
+    struct coda_out_hdr oh;
+	int path;
+};
+
+/* coda_statfs: NO_IN */
+struct coda_statfs_in {
+    struct coda_in_hdr in;
+};
+
+struct coda_statfs_out {
+    struct coda_out_hdr oh;
+    struct coda_statfs stat;
+};
+
+/* 
+ * Occasionally, we don't cache the fid returned by CODA_LOOKUP. 
+ * For instance, if the fid is inconsistent. 
+ * This case is handled by setting the top bit of the type result parameter.
+ */
+#define CODA_NOCACHE          0x80000000
+
+union inputArgs {
+    struct coda_in_hdr ih;		/* NB: every struct below begins with an ih */
+    struct coda_open_in coda_open;
+    struct coda_store_in coda_store;
+    struct coda_release_in coda_release;
+    struct coda_close_in coda_close;
+    struct coda_ioctl_in coda_ioctl;
+    struct coda_getattr_in coda_getattr;
+    struct coda_setattr_in coda_setattr;
+    struct coda_access_in coda_access;
+    struct coda_lookup_in coda_lookup;
+    struct coda_create_in coda_create;
+    struct coda_remove_in coda_remove;
+    struct coda_link_in coda_link;
+    struct coda_rename_in coda_rename;
+    struct coda_mkdir_in coda_mkdir;
+    struct coda_rmdir_in coda_rmdir;
+    struct coda_symlink_in coda_symlink;
+    struct coda_readlink_in coda_readlink;
+    struct coda_fsync_in coda_fsync;
+    struct coda_vget_in coda_vget;
+    struct coda_open_by_fd_in coda_open_by_fd;
+    struct coda_open_by_path_in coda_open_by_path;
+    struct coda_statfs_in coda_statfs;
+};
+
+union outputArgs {
+    struct coda_out_hdr oh;		/* NB: every struct below begins with an oh */
+    struct coda_root_out coda_root;
+    struct coda_open_out coda_open;
+    struct coda_ioctl_out coda_ioctl;
+    struct coda_getattr_out coda_getattr;
+    struct coda_lookup_out coda_lookup;
+    struct coda_create_out coda_create;
+    struct coda_mkdir_out coda_mkdir;
+    struct coda_readlink_out coda_readlink;
+    struct coda_vget_out coda_vget;
+    struct coda_purgeuser_out coda_purgeuser;
+    struct coda_zapfile_out coda_zapfile;
+    struct coda_zapdir_out coda_zapdir;
+    struct coda_purgefid_out coda_purgefid;
+    struct coda_replace_out coda_replace;
+    struct coda_open_by_fd_out coda_open_by_fd;
+    struct coda_open_by_path_out coda_open_by_path;
+    struct coda_statfs_out coda_statfs;
+};    
+
+union coda_downcalls {
+    /* CODA_INVALIDATE is a venus->kernel call */
+    /* CODA_FLUSH is a venus->kernel call */
+    struct coda_purgeuser_out purgeuser;
+    struct coda_zapfile_out zapfile;
+    struct coda_zapdir_out zapdir;
+    struct coda_purgefid_out purgefid;
+    struct coda_replace_out replace;
+};
+
+
+/*
+ * Used for identifying usage of "Control" and pioctls
+ */
+
+#define PIOCPARM_MASK 0x0000ffff
+struct ViceIoctl {
+        void __user *in;        /* Data to be transferred in */
+        void __user *out;       /* Data to be transferred out */
+        u_short in_size;        /* Size of input buffer <= 2K */
+        u_short out_size;       /* Maximum size of output buffer, <= 2K */
+};
+
+struct PioctlData {
+        const char __user *path;
+        int follow;
+        struct ViceIoctl vi;
+};
+
+#define CODA_CONTROL		".CONTROL"
+#define CODA_CONTROLLEN		8
+#define CTL_INO			-1
+
+/* Data passed to mount */
+
+#define CODA_MOUNT_VERSION 1
+
+struct coda_mount_data {
+	int		version;
+	int		fd;       /* Opened device */
+};
+
+#endif /* _UAPI_CODA_HEADER_ */
diff --git a/include/uapi/linux/coda_psdev.h b/include/uapi/linux/coda_psdev.h
new file mode 100644
index 00000000000..79d05981fc4
--- /dev/null
+++ b/include/uapi/linux/coda_psdev.h
@@ -0,0 +1,27 @@
+#ifndef _UAPI__CODA_PSDEV_H
+#define _UAPI__CODA_PSDEV_H
+
+#include <linux/magic.h>
+
+#define CODA_PSDEV_MAJOR 67
+#define MAX_CODADEVS  5	   /* how many do we allow */
+
+
+/* messages between coda filesystem in kernel and Venus */
+struct upc_req {
+	struct list_head    uc_chain;
+	caddr_t	            uc_data;
+	u_short	            uc_flags;
+	u_short             uc_inSize;  /* Size is at most 5000 bytes */
+	u_short	            uc_outSize;
+	u_short	            uc_opcode;  /* copied from data to save lookup */
+	int		    uc_unique;
+	wait_queue_head_t   uc_sleep;   /* process' wait queue */
+};
+
+#define CODA_REQ_ASYNC  0x1
+#define CODA_REQ_READ   0x2
+#define CODA_REQ_WRITE  0x4
+#define CODA_REQ_ABORT  0x8
+
+#endif /* _UAPI__CODA_PSDEV_H */
diff --git a/include/uapi/linux/coff.h b/include/uapi/linux/coff.h
new file mode 100644
index 00000000000..6354a7fe22b
--- /dev/null
+++ b/include/uapi/linux/coff.h
@@ -0,0 +1,351 @@
+/* This file is derived from the GAS 2.1.4 assembler control file.
+   The GAS product is under the GNU General Public License, version 2 or later.
+   As such, this file is also under that license.
+
+   If the file format changes in the COFF object, this file should be
+   subsequently updated to reflect the changes.
+
+   The actual loader module only uses a few of these structures. The full
+   set is documented here because I received the full set. If you wish
+   more information about COFF, then O'Reilly has a very excellent book.
+*/
+
+#define  E_SYMNMLEN  8   /* Number of characters in a symbol name         */
+#define  E_FILNMLEN 14   /* Number of characters in a file name           */
+#define  E_DIMNUM    4   /* Number of array dimensions in auxiliary entry */
+
+/*
+ * These defines are byte order independent. There is no alignment of fields
+ * permitted in the structures. Therefore they are declared as characters
+ * and the values loaded from the character positions. It also makes it
+ * nice to have it "endian" independent.
+ */
+ 
+/* Load a short int from the following tables with little-endian formats */
+#define COFF_SHORT_L(ps) ((short)(((unsigned short)((unsigned char)ps[1])<<8)|\
+				  ((unsigned short)((unsigned char)ps[0]))))
+
+/* Load a long int from the following tables with little-endian formats */
+#define COFF_LONG_L(ps) (((long)(((unsigned long)((unsigned char)ps[3])<<24) |\
+				 ((unsigned long)((unsigned char)ps[2])<<16) |\
+				 ((unsigned long)((unsigned char)ps[1])<<8)  |\
+				 ((unsigned long)((unsigned char)ps[0])))))
+ 
+/* Load a short int from the following tables with big-endian formats */
+#define COFF_SHORT_H(ps) ((short)(((unsigned short)((unsigned char)ps[0])<<8)|\
+				  ((unsigned short)((unsigned char)ps[1]))))
+
+/* Load a long int from the following tables with big-endian formats */
+#define COFF_LONG_H(ps) (((long)(((unsigned long)((unsigned char)ps[0])<<24) |\
+				 ((unsigned long)((unsigned char)ps[1])<<16) |\
+				 ((unsigned long)((unsigned char)ps[2])<<8)  |\
+				 ((unsigned long)((unsigned char)ps[3])))))
+
+/* These may be overridden later by brain dead implementations which generate
+   a big-endian header with little-endian data. In that case, generate a
+   replacement macro which tests a flag and uses either of the two above
+   as appropriate. */
+
+#define COFF_LONG(v)   COFF_LONG_L(v)
+#define COFF_SHORT(v)  COFF_SHORT_L(v)
+
+/*** coff information for Intel 386/486.  */
+
+/********************** FILE HEADER **********************/
+
+struct COFF_filehdr {
+	char f_magic[2];	/* magic number			*/
+	char f_nscns[2];	/* number of sections		*/
+	char f_timdat[4];	/* time & date stamp		*/
+	char f_symptr[4];	/* file pointer to symtab	*/
+	char f_nsyms[4];	/* number of symtab entries	*/
+	char f_opthdr[2];	/* sizeof(optional hdr)		*/
+	char f_flags[2];	/* flags			*/
+};
+
+/*
+ *   Bits for f_flags:
+ *
+ *	F_RELFLG	relocation info stripped from file
+ *	F_EXEC		file is executable  (i.e. no unresolved external
+ *			references)
+ *	F_LNNO		line numbers stripped from file
+ *	F_LSYMS		local symbols stripped from file
+ *	F_MINMAL	this is a minimal object file (".m") output of fextract
+ *	F_UPDATE	this is a fully bound update file, output of ogen
+ *	F_SWABD		this file has had its bytes swabbed (in names)
+ *	F_AR16WR	this file has the byte ordering of an AR16WR
+ *			(e.g. 11/70) machine
+ *	F_AR32WR	this file has the byte ordering of an AR32WR machine
+ *			(e.g. vax and iNTEL 386)
+ *	F_AR32W		this file has the byte ordering of an AR32W machine
+ *			(e.g. 3b,maxi)
+ *	F_PATCH		file contains "patch" list in optional header
+ *	F_NODF		(minimal file only) no decision functions for
+ *			replaced functions
+ */
+
+#define  COFF_F_RELFLG		0000001
+#define  COFF_F_EXEC		0000002
+#define  COFF_F_LNNO		0000004
+#define  COFF_F_LSYMS		0000010
+#define  COFF_F_MINMAL		0000020
+#define  COFF_F_UPDATE		0000040
+#define  COFF_F_SWABD		0000100
+#define  COFF_F_AR16WR		0000200
+#define  COFF_F_AR32WR		0000400
+#define  COFF_F_AR32W		0001000
+#define  COFF_F_PATCH		0002000
+#define  COFF_F_NODF		0002000
+
+#define	COFF_I386MAGIC	        0x14c   /* Linux's system    */
+
+#if 0   /* Perhaps, someday, these formats may be used.      */
+#define COFF_I386PTXMAGIC	0x154
+#define COFF_I386AIXMAGIC	0x175   /* IBM's AIX system  */
+#define COFF_I386BADMAG(x) ((COFF_SHORT((x).f_magic) != COFF_I386MAGIC) \
+			  && COFF_SHORT((x).f_magic) != COFF_I386PTXMAGIC \
+			  && COFF_SHORT((x).f_magic) != COFF_I386AIXMAGIC)
+#else
+#define COFF_I386BADMAG(x) (COFF_SHORT((x).f_magic) != COFF_I386MAGIC)
+#endif
+
+#define	COFF_FILHDR	struct COFF_filehdr
+#define	COFF_FILHSZ	sizeof(COFF_FILHDR)
+
+/********************** AOUT "OPTIONAL HEADER" **********************/
+
+/* Linux COFF must have this "optional" header. Standard COFF has no entry
+   location for the "entry" point. They normally would start with the first
+   location of the .text section. This is not a good idea for linux. So,
+   the use of this "optional" header is not optional. It is required.
+
+   Do not be tempted to assume that the size of the optional header is
+   a constant and simply index the next byte by the size of this structure.
+   Use the 'f_opthdr' field in the main coff header for the size of the
+   structure actually written to the file!!
+*/
+
+typedef struct 
+{
+  char 	magic[2];		/* type of file				 */
+  char	vstamp[2];		/* version stamp			 */
+  char	tsize[4];		/* text size in bytes, padded to FW bdry */
+  char	dsize[4];		/* initialized   data "   "		 */
+  char	bsize[4];		/* uninitialized data "   "		 */
+  char	entry[4];		/* entry pt.				 */
+  char 	text_start[4];		/* base of text used for this file       */
+  char 	data_start[4];		/* base of data used for this file       */
+}
+COFF_AOUTHDR;
+
+#define COFF_AOUTSZ (sizeof(COFF_AOUTHDR))
+
+#define COFF_STMAGIC	0401
+#define COFF_OMAGIC     0404
+#define COFF_JMAGIC     0407    /* dirty text and data image, can't share  */
+#define COFF_DMAGIC     0410    /* dirty text segment, data aligned        */
+#define COFF_ZMAGIC     0413    /* The proper magic number for executables  */
+#define COFF_SHMAGIC	0443	/* shared library header                   */
+
+/********************** SECTION HEADER **********************/
+
+struct COFF_scnhdr {
+  char		s_name[8];	/* section name			    */
+  char		s_paddr[4];	/* physical address, aliased s_nlib */
+  char		s_vaddr[4];	/* virtual address		    */
+  char		s_size[4];	/* section size			    */
+  char		s_scnptr[4];	/* file ptr to raw data for section */
+  char		s_relptr[4];	/* file ptr to relocation	    */
+  char		s_lnnoptr[4];	/* file ptr to line numbers	    */
+  char		s_nreloc[2];	/* number of relocation entries	    */
+  char		s_nlnno[2];	/* number of line number entries    */
+  char		s_flags[4];	/* flags			    */
+};
+
+#define	COFF_SCNHDR	struct COFF_scnhdr
+#define	COFF_SCNHSZ	sizeof(COFF_SCNHDR)
+
+/*
+ * names of "special" sections
+ */
+
+#define COFF_TEXT	".text"
+#define COFF_DATA	".data"
+#define COFF_BSS	".bss"
+#define COFF_COMMENT    ".comment"
+#define COFF_LIB        ".lib"
+
+#define COFF_SECT_TEXT  0      /* Section for instruction code             */
+#define COFF_SECT_DATA  1      /* Section for initialized globals          */
+#define COFF_SECT_BSS   2      /* Section for un-initialized globals       */
+#define COFF_SECT_REQD  3      /* Minimum number of sections for good file */
+
+#define COFF_STYP_REG     0x00 /* regular segment                          */
+#define COFF_STYP_DSECT   0x01 /* dummy segment                            */
+#define COFF_STYP_NOLOAD  0x02 /* no-load segment                          */
+#define COFF_STYP_GROUP   0x04 /* group segment                            */
+#define COFF_STYP_PAD     0x08 /* .pad segment                             */
+#define COFF_STYP_COPY    0x10 /* copy section                             */
+#define COFF_STYP_TEXT    0x20 /* .text segment                            */
+#define COFF_STYP_DATA    0x40 /* .data segment                            */
+#define COFF_STYP_BSS     0x80 /* .bss segment                             */
+#define COFF_STYP_INFO   0x200 /* .comment section                         */
+#define COFF_STYP_OVER   0x400 /* overlay section                          */
+#define COFF_STYP_LIB    0x800 /* library section                          */
+
+/*
+ * Shared libraries have the following section header in the data field for
+ * each library.
+ */
+
+struct COFF_slib {
+  char		sl_entsz[4];	/* Size of this entry               */
+  char		sl_pathndx[4];	/* size of the header field         */
+};
+
+#define	COFF_SLIBHD	struct COFF_slib
+#define	COFF_SLIBSZ	sizeof(COFF_SLIBHD)
+
+/********************** LINE NUMBERS **********************/
+
+/* 1 line number entry for every "breakpointable" source line in a section.
+ * Line numbers are grouped on a per function basis; first entry in a function
+ * grouping will have l_lnno = 0 and in place of physical address will be the
+ * symbol table index of the function name.
+ */
+
+struct COFF_lineno {
+  union {
+    char l_symndx[4];	/* function name symbol index, iff l_lnno == 0*/
+    char l_paddr[4];	/* (physical) address of line number	*/
+  } l_addr;
+  char l_lnno[2];	/* line number		*/
+};
+
+#define	COFF_LINENO	struct COFF_lineno
+#define	COFF_LINESZ	6
+
+/********************** SYMBOLS **********************/
+
+#define COFF_E_SYMNMLEN	 8	/* # characters in a short symbol name	*/
+#define COFF_E_FILNMLEN	14	/* # characters in a file name		*/
+#define COFF_E_DIMNUM	 4	/* # array dimensions in auxiliary entry */
+
+/*
+ *  All symbols and sections have the following definition
+ */
+
+struct COFF_syment 
+{
+  union {
+    char e_name[E_SYMNMLEN];    /* Symbol name (first 8 characters) */
+    struct {
+      char e_zeroes[4];         /* Leading zeros */
+      char e_offset[4];         /* Offset if this is a header section */
+    } e;
+  } e;
+
+  char e_value[4];              /* Value (address) of the segment */
+  char e_scnum[2];              /* Section number */
+  char e_type[2];               /* Type of section */
+  char e_sclass[1];             /* Loader class */
+  char e_numaux[1];             /* Number of auxiliary entries which follow */
+};
+
+#define COFF_N_BTMASK	(0xf)   /* Mask for important class bits */
+#define COFF_N_TMASK	(0x30)  /* Mask for important type bits  */
+#define COFF_N_BTSHFT	(4)     /* # bits to shift class field   */
+#define COFF_N_TSHIFT	(2)     /* # bits to shift type field    */
+
+/*
+ *  Auxiliary entries because the main table is too limiting.
+ */
+  
+union COFF_auxent {
+
+/*
+ *  Debugger information
+ */
+
+  struct {
+    char x_tagndx[4];	        /* str, un, or enum tag indx */
+    union {
+      struct {
+	char  x_lnno[2];        /* declaration line number */
+	char  x_size[2];        /* str/union/array size */
+      } x_lnsz;
+      char x_fsize[4];	        /* size of function */
+    } x_misc;
+
+    union {
+      struct {		        /* if ISFCN, tag, or .bb */
+	char x_lnnoptr[4];	/* ptr to fcn line # */
+	char x_endndx[4];	/* entry ndx past block end */
+      } x_fcn;
+
+      struct {		        /* if ISARY, up to 4 dimen. */
+	char x_dimen[E_DIMNUM][2];
+      } x_ary;
+    } x_fcnary;
+
+    char x_tvndx[2];	/* tv index */
+  } x_sym;
+
+/*
+ *   Source file names (debugger information)
+ */
+
+  union {
+    char x_fname[E_FILNMLEN];
+    struct {
+      char x_zeroes[4];
+      char x_offset[4];
+    } x_n;
+  } x_file;
+
+/*
+ *   Section information
+ */
+
+  struct {
+    char x_scnlen[4];	/* section length */
+    char x_nreloc[2];	/* # relocation entries */
+    char x_nlinno[2];	/* # line numbers */
+  } x_scn;
+
+/*
+ *   Transfer vector (branch table)
+ */
+  
+  struct {
+    char x_tvfill[4];	/* tv fill value */
+    char x_tvlen[2];	/* length of .tv */
+    char x_tvran[2][2];	/* tv range */
+  } x_tv;		/* info about .tv section (in auxent of symbol .tv)) */
+};
+
+#define	COFF_SYMENT	struct COFF_syment
+#define	COFF_SYMESZ	18	
+#define	COFF_AUXENT	union COFF_auxent
+#define	COFF_AUXESZ	18
+
+#define COFF_ETEXT	"etext"
+
+/********************** RELOCATION DIRECTIVES **********************/
+
+struct COFF_reloc {
+  char r_vaddr[4];        /* Virtual address of item    */
+  char r_symndx[4];       /* Symbol index in the symtab */
+  char r_type[2];         /* Relocation type            */
+};
+
+#define COFF_RELOC struct COFF_reloc
+#define COFF_RELSZ 10
+
+#define COFF_DEF_DATA_SECTION_ALIGNMENT  4
+#define COFF_DEF_BSS_SECTION_ALIGNMENT   4
+#define COFF_DEF_TEXT_SECTION_ALIGNMENT  4
+
+/* For new sections we haven't heard of before */
+#define COFF_DEF_SECTION_ALIGNMENT       4
diff --git a/include/uapi/linux/connector.h b/include/uapi/linux/connector.h
new file mode 100644
index 00000000000..8761a0349c7
--- /dev/null
+++ b/include/uapi/linux/connector.h
@@ -0,0 +1,77 @@
+/*
+ * 	connector.h
+ * 
+ * 2004-2005 Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
+ * All rights reserved.
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _UAPI__CONNECTOR_H
+#define _UAPI__CONNECTOR_H
+
+#include <linux/types.h>
+
+/*
+ * Process Events connector unique ids -- used for message routing
+ */
+#define CN_IDX_PROC			0x1
+#define CN_VAL_PROC			0x1
+#define CN_IDX_CIFS			0x2
+#define CN_VAL_CIFS                     0x1
+#define CN_W1_IDX			0x3	/* w1 communication */
+#define CN_W1_VAL			0x1
+#define CN_IDX_V86D			0x4
+#define CN_VAL_V86D_UVESAFB		0x1
+#define CN_IDX_BB			0x5	/* BlackBoard, from the TSP GPL sampling framework */
+#define CN_DST_IDX			0x6
+#define CN_DST_VAL			0x1
+#define CN_IDX_DM			0x7	/* Device Mapper */
+#define CN_VAL_DM_USERSPACE_LOG		0x1
+#define CN_IDX_DRBD			0x8
+#define CN_VAL_DRBD			0x1
+#define CN_KVP_IDX			0x9	/* HyperV KVP */
+#define CN_KVP_VAL			0x1	/* queries from the kernel */
+
+#define CN_NETLINK_USERS		10	/* Highest index + 1 */
+
+/*
+ * Maximum connector's message size.
+ */
+#define CONNECTOR_MAX_MSG_SIZE		16384
+
+/*
+ * idx and val are unique identifiers which 
+ * are used for message routing and 
+ * must be registered in connector.h for in-kernel usage.
+ */
+
+struct cb_id {
+	__u32 idx;
+	__u32 val;
+};
+
+struct cn_msg {
+	struct cb_id id;
+
+	__u32 seq;
+	__u32 ack;
+
+	__u16 len;		/* Length of the following data */
+	__u16 flags;
+	__u8 data[0];
+};
+
+#endif /* _UAPI__CONNECTOR_H */
diff --git a/include/uapi/linux/const.h b/include/uapi/linux/const.h
new file mode 100644
index 00000000000..c22c707c455
--- /dev/null
+++ b/include/uapi/linux/const.h
@@ -0,0 +1,24 @@
+/* const.h: Macros for dealing with constants.  */
+
+#ifndef _LINUX_CONST_H
+#define _LINUX_CONST_H
+
+/* Some constant macros are used in both assembler and
+ * C code.  Therefore we cannot annotate them always with
+ * 'UL' and other type specifiers unilaterally.  We
+ * use the following macros to deal with this.
+ *
+ * Similarly, _AT() will cast an expression with a type in C, but
+ * leave it unchanged in asm.
+ */
+
+#ifdef __ASSEMBLY__
+#define _AC(X,Y)	X
+#define _AT(T,X)	X
+#else
+#define __AC(X,Y)	(X##Y)
+#define _AC(X,Y)	__AC(X,Y)
+#define _AT(T,X)	((T)(X))
+#endif
+
+#endif /* !(_LINUX_CONST_H) */
diff --git a/include/uapi/linux/cramfs_fs.h b/include/uapi/linux/cramfs_fs.h
new file mode 100644
index 00000000000..e4611a9b924
--- /dev/null
+++ b/include/uapi/linux/cramfs_fs.h
@@ -0,0 +1,88 @@
+#ifndef _UAPI__CRAMFS_H
+#define _UAPI__CRAMFS_H
+
+#include <linux/types.h>
+#include <linux/magic.h>
+
+#define CRAMFS_SIGNATURE	"Compressed ROMFS"
+
+/*
+ * Width of various bitfields in struct cramfs_inode.
+ * Primarily used to generate warnings in mkcramfs.
+ */
+#define CRAMFS_MODE_WIDTH 16
+#define CRAMFS_UID_WIDTH 16
+#define CRAMFS_SIZE_WIDTH 24
+#define CRAMFS_GID_WIDTH 8
+#define CRAMFS_NAMELEN_WIDTH 6
+#define CRAMFS_OFFSET_WIDTH 26
+
+/*
+ * Since inode.namelen is a unsigned 6-bit number, the maximum cramfs
+ * path length is 63 << 2 = 252.
+ */
+#define CRAMFS_MAXPATHLEN (((1 << CRAMFS_NAMELEN_WIDTH) - 1) << 2)
+
+/*
+ * Reasonably terse representation of the inode data.
+ */
+struct cramfs_inode {
+	__u32 mode:CRAMFS_MODE_WIDTH, uid:CRAMFS_UID_WIDTH;
+	/* SIZE for device files is i_rdev */
+	__u32 size:CRAMFS_SIZE_WIDTH, gid:CRAMFS_GID_WIDTH;
+	/* NAMELEN is the length of the file name, divided by 4 and
+           rounded up.  (cramfs doesn't support hard links.) */
+	/* OFFSET: For symlinks and non-empty regular files, this
+	   contains the offset (divided by 4) of the file data in
+	   compressed form (starting with an array of block pointers;
+	   see README).  For non-empty directories it is the offset
+	   (divided by 4) of the inode of the first file in that
+	   directory.  For anything else, offset is zero. */
+	__u32 namelen:CRAMFS_NAMELEN_WIDTH, offset:CRAMFS_OFFSET_WIDTH;
+};
+
+struct cramfs_info {
+	__u32 crc;
+	__u32 edition;
+	__u32 blocks;
+	__u32 files;
+};
+
+/*
+ * Superblock information at the beginning of the FS.
+ */
+struct cramfs_super {
+	__u32 magic;			/* 0x28cd3d45 - random number */
+	__u32 size;			/* length in bytes */
+	__u32 flags;			/* feature flags */
+	__u32 future;			/* reserved for future use */
+	__u8 signature[16];		/* "Compressed ROMFS" */
+	struct cramfs_info fsid;	/* unique filesystem info */
+	__u8 name[16];			/* user-defined name */
+	struct cramfs_inode root;	/* root inode data */
+};
+
+/*
+ * Feature flags
+ *
+ * 0x00000000 - 0x000000ff: features that work for all past kernels
+ * 0x00000100 - 0xffffffff: features that don't work for past kernels
+ */
+#define CRAMFS_FLAG_FSID_VERSION_2	0x00000001	/* fsid version #2 */
+#define CRAMFS_FLAG_SORTED_DIRS		0x00000002	/* sorted dirs */
+#define CRAMFS_FLAG_HOLES		0x00000100	/* support for holes */
+#define CRAMFS_FLAG_WRONG_SIGNATURE	0x00000200	/* reserved */
+#define CRAMFS_FLAG_SHIFTED_ROOT_OFFSET	0x00000400	/* shifted root fs */
+
+/*
+ * Valid values in super.flags.  Currently we refuse to mount
+ * if (flags & ~CRAMFS_SUPPORTED_FLAGS).  Maybe that should be
+ * changed to test super.future instead.
+ */
+#define CRAMFS_SUPPORTED_FLAGS	( 0x000000ff \
+				| CRAMFS_FLAG_HOLES \
+				| CRAMFS_FLAG_WRONG_SIGNATURE \
+				| CRAMFS_FLAG_SHIFTED_ROOT_OFFSET )
+
+
+#endif /* _UAPI__CRAMFS_H */
diff --git a/include/uapi/linux/cuda.h b/include/uapi/linux/cuda.h
new file mode 100644
index 00000000000..286f9f10fce
--- /dev/null
+++ b/include/uapi/linux/cuda.h
@@ -0,0 +1,33 @@
+/*
+ * Definitions for talking to the CUDA.  The CUDA is a microcontroller
+ * which controls the ADB, system power, RTC, and various other things.
+ *
+ * Copyright (C) 1996 Paul Mackerras.
+ */
+
+#ifndef _UAPI_LINUX_CUDA_H
+#define _UAPI_LINUX_CUDA_H
+
+/* CUDA commands (2nd byte) */
+#define CUDA_WARM_START		0
+#define CUDA_AUTOPOLL		1
+#define CUDA_GET_6805_ADDR	2
+#define CUDA_GET_TIME		3
+#define CUDA_GET_PRAM		7
+#define CUDA_SET_6805_ADDR	8
+#define CUDA_SET_TIME		9
+#define CUDA_POWERDOWN		0xa
+#define CUDA_POWERUP_TIME	0xb
+#define CUDA_SET_PRAM		0xc
+#define CUDA_MS_RESET		0xd
+#define CUDA_SEND_DFAC		0xe
+#define CUDA_RESET_SYSTEM	0x11
+#define CUDA_SET_IPL		0x12
+#define CUDA_SET_AUTO_RATE	0x14
+#define CUDA_GET_AUTO_RATE	0x16
+#define CUDA_SET_DEVICE_LIST	0x19
+#define CUDA_GET_DEVICE_LIST	0x1a
+#define CUDA_GET_SET_IIC	0x22
+
+
+#endif /* _UAPI_LINUX_CUDA_H */
diff --git a/include/uapi/linux/cyclades.h b/include/uapi/linux/cyclades.h
new file mode 100644
index 00000000000..12b587aa361
--- /dev/null
+++ b/include/uapi/linux/cyclades.h
@@ -0,0 +1,493 @@
+/* $Revision: 3.0 $$Date: 1998/11/02 14:20:59 $
+ * linux/include/linux/cyclades.h
+ *
+ * This file was initially written by
+ * Randolph Bentson <bentson@grieg.seaslug.org> and is maintained by
+ * Ivan Passos <ivan@cyclades.com>.
+ *
+ * This file contains the general definitions for the cyclades.c driver
+ *$Log: cyclades.h,v $
+ *Revision 3.1  2002/01/29 11:36:16  henrique
+ *added throttle field on struct cyclades_port to indicate whether the
+ *port is throttled or not
+ *
+ *Revision 3.1  2000/04/19 18:52:52  ivan
+ *converted address fields to unsigned long and added fields for physical
+ *addresses on cyclades_card structure;
+ *
+ *Revision 3.0  1998/11/02 14:20:59  ivan
+ *added nports field on cyclades_card structure;
+ *
+ *Revision 2.5  1998/08/03 16:57:01  ivan
+ *added cyclades_idle_stats structure;
+ * 
+ *Revision 2.4  1998/06/01 12:09:53  ivan
+ *removed closing_wait2 from cyclades_port structure;
+ *
+ *Revision 2.3  1998/03/16 18:01:12  ivan
+ *changes in the cyclades_port structure to get it closer to the 
+ *standard serial port structure;
+ *added constants for new ioctls;
+ *
+ *Revision 2.2  1998/02/17 16:50:00  ivan
+ *changes in the cyclades_port structure (addition of shutdown_wait and 
+ *chip_rev variables);
+ *added constants for new ioctls and for CD1400 rev. numbers.
+ *
+ *Revision 2.1	1997/10/24 16:03:00  ivan
+ *added rflow (which allows enabling the CD1400 special flow control 
+ *feature) and rtsdtr_inv (which allows DTR/RTS pin inversion) to 
+ *cyclades_port structure;
+ *added Alpha support
+ *
+ *Revision 2.0  1997/06/30 10:30:00  ivan
+ *added some new doorbell command constants related to IOCTLW and
+ *UART error signaling
+ *
+ *Revision 1.8  1997/06/03 15:30:00  ivan
+ *added constant ZFIRM_HLT
+ *added constant CyPCI_Ze_win ( = 2 * Cy_PCI_Zwin)
+ *
+ *Revision 1.7  1997/03/26 10:30:00  daniel
+ *new entries at the end of cyclades_port struct to reallocate
+ *variables illegally allocated within card memory.
+ *
+ *Revision 1.6  1996/09/09 18:35:30  bentson
+ *fold in changes for Cyclom-Z -- including structures for
+ *communicating with board as well modest changes to original
+ *structures to support new features.
+ *
+ *Revision 1.5  1995/11/13 21:13:31  bentson
+ *changes suggested by Michael Chastain <mec@duracef.shout.net>
+ *to support use of this file in non-kernel applications
+ *
+ *
+ */
+
+#ifndef _UAPI_LINUX_CYCLADES_H
+#define _UAPI_LINUX_CYCLADES_H
+
+#include <linux/types.h>
+
+struct cyclades_monitor {
+        unsigned long           int_count;
+        unsigned long           char_count;
+        unsigned long           char_max;
+        unsigned long           char_last;
+};
+
+/*
+ * These stats all reflect activity since the device was last initialized.
+ * (i.e., since the port was opened with no other processes already having it
+ * open)
+ */
+struct cyclades_idle_stats {
+    __kernel_time_t in_use;	/* Time device has been in use (secs) */
+    __kernel_time_t recv_idle;	/* Time since last char received (secs) */
+    __kernel_time_t xmit_idle;	/* Time since last char transmitted (secs) */
+    unsigned long  recv_bytes;	/* Bytes received */
+    unsigned long  xmit_bytes;	/* Bytes transmitted */
+    unsigned long  overruns;	/* Input overruns */
+    unsigned long  frame_errs;	/* Input framing errors */
+    unsigned long  parity_errs;	/* Input parity errors */
+};
+
+#define CYCLADES_MAGIC  0x4359
+
+#define CYGETMON                0x435901
+#define CYGETTHRESH             0x435902
+#define CYSETTHRESH             0x435903
+#define CYGETDEFTHRESH          0x435904
+#define CYSETDEFTHRESH          0x435905
+#define CYGETTIMEOUT            0x435906
+#define CYSETTIMEOUT            0x435907
+#define CYGETDEFTIMEOUT         0x435908
+#define CYSETDEFTIMEOUT         0x435909
+#define CYSETRFLOW		0x43590a
+#define CYGETRFLOW		0x43590b
+#define CYSETRTSDTR_INV		0x43590c
+#define CYGETRTSDTR_INV		0x43590d
+#define CYZSETPOLLCYCLE		0x43590e
+#define CYZGETPOLLCYCLE		0x43590f
+#define CYGETCD1400VER		0x435910
+#define	CYSETWAIT		0x435912
+#define	CYGETWAIT		0x435913
+
+/*************** CYCLOM-Z ADDITIONS ***************/
+
+#define CZIOC           ('M' << 8)
+#define CZ_NBOARDS      (CZIOC|0xfa)
+#define CZ_BOOT_START   (CZIOC|0xfb)
+#define CZ_BOOT_DATA    (CZIOC|0xfc)
+#define CZ_BOOT_END     (CZIOC|0xfd)
+#define CZ_TEST         (CZIOC|0xfe)
+
+#define CZ_DEF_POLL	(HZ/25)
+
+#define MAX_BOARD       4       /* Max number of boards */
+#define MAX_DEV         256     /* Max number of ports total */
+#define	CYZ_MAX_SPEED	921600
+
+#define	CYZ_FIFO_SIZE	16
+
+#define CYZ_BOOT_NWORDS 0x100
+struct CYZ_BOOT_CTRL {
+        unsigned short  nboard;
+        int             status[MAX_BOARD];
+        int             nchannel[MAX_BOARD];
+        int             fw_rev[MAX_BOARD];
+        unsigned long   offset;
+        unsigned long   data[CYZ_BOOT_NWORDS];
+};
+
+
+#ifndef DP_WINDOW_SIZE
+/*
+ *	Memory Window Sizes
+ */
+
+#define	DP_WINDOW_SIZE		(0x00080000)	/* window size 512 Kb */
+#define	ZE_DP_WINDOW_SIZE	(0x00100000)	/* window size 1 Mb (Ze and
+						  8Zo V.2 */
+#define	CTRL_WINDOW_SIZE	(0x00000080)	/* runtime regs 128 bytes */
+
+/*
+ *	CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver
+ *	normally will access only interested on the fpga_id, fpga_version,
+ *	start_cpu and stop_cpu.
+ */
+
+struct	CUSTOM_REG {
+	__u32	fpga_id;		/* FPGA Identification Register */
+	__u32	fpga_version;		/* FPGA Version Number Register */
+	__u32	cpu_start;		/* CPU start Register (write) */
+	__u32	cpu_stop;		/* CPU stop Register (write) */
+	__u32	misc_reg;		/* Miscellaneous Register */
+	__u32	idt_mode;		/* IDT mode Register */
+	__u32	uart_irq_status;	/* UART IRQ status Register */
+	__u32	clear_timer0_irq;	/* Clear timer interrupt Register */
+	__u32	clear_timer1_irq;	/* Clear timer interrupt Register */
+	__u32	clear_timer2_irq;	/* Clear timer interrupt Register */
+	__u32	test_register;		/* Test Register */
+	__u32	test_count;		/* Test Count Register */
+	__u32	timer_select;		/* Timer select register */
+	__u32	pr_uart_irq_status;	/* Prioritized UART IRQ stat Reg */
+	__u32	ram_wait_state;		/* RAM wait-state Register */
+	__u32	uart_wait_state;	/* UART wait-state Register */
+	__u32	timer_wait_state;	/* timer wait-state Register */
+	__u32	ack_wait_state;		/* ACK wait State Register */
+};
+
+/*
+ *	RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime
+ *	registers. This structure can be used to access the 9060 registers
+ *	(memory mapped).
+ */
+
+struct RUNTIME_9060 {
+	__u32	loc_addr_range;	/* 00h - Local Address Range */
+	__u32	loc_addr_base;	/* 04h - Local Address Base */
+	__u32	loc_arbitr;	/* 08h - Local Arbitration */
+	__u32	endian_descr;	/* 0Ch - Big/Little Endian Descriptor */
+	__u32	loc_rom_range;	/* 10h - Local ROM Range */
+	__u32	loc_rom_base;	/* 14h - Local ROM Base */
+	__u32	loc_bus_descr;	/* 18h - Local Bus descriptor */
+	__u32	loc_range_mst;	/* 1Ch - Local Range for Master to PCI */
+	__u32	loc_base_mst;	/* 20h - Local Base for Master PCI */
+	__u32	loc_range_io;	/* 24h - Local Range for Master IO */
+	__u32	pci_base_mst;	/* 28h - PCI Base for Master PCI */
+	__u32	pci_conf_io;	/* 2Ch - PCI configuration for Master IO */
+	__u32	filler1;	/* 30h */
+	__u32	filler2;	/* 34h */
+	__u32	filler3;	/* 38h */
+	__u32	filler4;	/* 3Ch */
+	__u32	mail_box_0;	/* 40h - Mail Box 0 */
+	__u32	mail_box_1;	/* 44h - Mail Box 1 */
+	__u32	mail_box_2;	/* 48h - Mail Box 2 */
+	__u32	mail_box_3;	/* 4Ch - Mail Box 3 */
+	__u32	filler5;	/* 50h */
+	__u32	filler6;	/* 54h */
+	__u32	filler7;	/* 58h */
+	__u32	filler8;	/* 5Ch */
+	__u32	pci_doorbell;	/* 60h - PCI to Local Doorbell */
+	__u32	loc_doorbell;	/* 64h - Local to PCI Doorbell */
+	__u32	intr_ctrl_stat;	/* 68h - Interrupt Control/Status */
+	__u32	init_ctrl;	/* 6Ch - EEPROM control, Init Control, etc */
+};
+
+/* Values for the Local Base Address re-map register */
+
+#define	WIN_RAM		0x00000001L	/* set the sliding window to RAM */
+#define	WIN_CREG	0x14000001L	/* set the window to custom Registers */
+
+/* Values timer select registers */
+
+#define	TIMER_BY_1M	0x00		/* clock divided by 1M */
+#define	TIMER_BY_256K	0x01		/* clock divided by 256k */
+#define	TIMER_BY_128K	0x02		/* clock divided by 128k */
+#define	TIMER_BY_32K	0x03		/* clock divided by 32k */
+
+/****************** ****************** *******************/
+#endif
+
+#ifndef ZFIRM_ID
+/* #include "zfwint.h" */
+/****************** ****************** *******************/
+/*
+ *	This file contains the definitions for interfacing with the
+ *	Cyclom-Z ZFIRM Firmware.
+ */
+
+/* General Constant definitions */
+
+#define	MAX_CHAN	64		/* max number of channels per board */
+
+/* firmware id structure (set after boot) */
+
+#define ID_ADDRESS	0x00000180L	/* signature/pointer address */
+#define	ZFIRM_ID	0x5557465AL	/* ZFIRM/U signature */
+#define	ZFIRM_HLT	0x59505B5CL	/* ZFIRM needs external power supply */
+#define	ZFIRM_RST	0x56040674L	/* RST signal (due to FW reset) */
+
+#define	ZF_TINACT_DEF	1000		/* default inactivity timeout 
+					   (1000 ms) */
+#define	ZF_TINACT	ZF_TINACT_DEF
+
+struct	FIRM_ID {
+	__u32	signature;		/* ZFIRM/U signature */
+	__u32	zfwctrl_addr;		/* pointer to ZFW_CTRL structure */
+};
+
+/* Op. System id */
+
+#define	C_OS_LINUX	0x00000030	/* generic Linux system */
+
+/* channel op_mode */
+
+#define	C_CH_DISABLE	0x00000000	/* channel is disabled */
+#define	C_CH_TXENABLE	0x00000001	/* channel Tx enabled */
+#define	C_CH_RXENABLE	0x00000002	/* channel Rx enabled */
+#define	C_CH_ENABLE	0x00000003	/* channel Tx/Rx enabled */
+#define	C_CH_LOOPBACK	0x00000004	/* Loopback mode */
+
+/* comm_parity - parity */
+
+#define	C_PR_NONE	0x00000000	/* None */
+#define	C_PR_ODD	0x00000001	/* Odd */
+#define C_PR_EVEN	0x00000002	/* Even */
+#define C_PR_MARK	0x00000004	/* Mark */
+#define C_PR_SPACE	0x00000008	/* Space */
+#define C_PR_PARITY	0x000000ff
+
+#define	C_PR_DISCARD	0x00000100	/* discard char with frame/par error */
+#define C_PR_IGNORE	0x00000200	/* ignore frame/par error */
+
+/* comm_data_l - data length and stop bits */
+
+#define C_DL_CS5	0x00000001
+#define C_DL_CS6	0x00000002
+#define C_DL_CS7	0x00000004
+#define C_DL_CS8	0x00000008
+#define	C_DL_CS		0x0000000f
+#define C_DL_1STOP	0x00000010
+#define C_DL_15STOP	0x00000020
+#define C_DL_2STOP	0x00000040
+#define	C_DL_STOP	0x000000f0
+
+/* interrupt enabling/status */
+
+#define	C_IN_DISABLE	0x00000000	/* zero, disable interrupts */
+#define	C_IN_TXBEMPTY	0x00000001	/* tx buffer empty */
+#define	C_IN_TXLOWWM	0x00000002	/* tx buffer below LWM */
+#define	C_IN_RXHIWM	0x00000010	/* rx buffer above HWM */
+#define	C_IN_RXNNDT	0x00000020	/* rx no new data timeout */
+#define	C_IN_MDCD	0x00000100	/* modem DCD change */
+#define	C_IN_MDSR	0x00000200	/* modem DSR change */
+#define	C_IN_MRI	0x00000400	/* modem RI change */
+#define	C_IN_MCTS	0x00000800	/* modem CTS change */
+#define	C_IN_RXBRK	0x00001000	/* Break received */
+#define	C_IN_PR_ERROR	0x00002000	/* parity error */
+#define	C_IN_FR_ERROR	0x00004000	/* frame error */
+#define C_IN_OVR_ERROR  0x00008000      /* overrun error */
+#define C_IN_RXOFL	0x00010000      /* RX buffer overflow */
+#define C_IN_IOCTLW	0x00020000      /* I/O control w/ wait */
+#define C_IN_MRTS	0x00040000	/* modem RTS drop */
+#define C_IN_ICHAR	0x00080000
+ 
+/* flow control */
+
+#define	C_FL_OXX	0x00000001	/* output Xon/Xoff flow control */
+#define	C_FL_IXX	0x00000002	/* output Xon/Xoff flow control */
+#define C_FL_OIXANY	0x00000004	/* output Xon/Xoff (any xon) */
+#define	C_FL_SWFLOW	0x0000000f
+
+/* flow status */
+
+#define	C_FS_TXIDLE	0x00000000	/* no Tx data in the buffer or UART */
+#define	C_FS_SENDING	0x00000001	/* UART is sending data */
+#define	C_FS_SWFLOW	0x00000002	/* Tx is stopped by received Xoff */
+
+/* rs_control/rs_status RS-232 signals */
+
+#define C_RS_PARAM	0x80000000	/* Indicates presence of parameter in 
+					   IOCTLM command */
+#define	C_RS_RTS	0x00000001	/* RTS */
+#define	C_RS_DTR	0x00000004	/* DTR */
+#define	C_RS_DCD	0x00000100	/* CD */
+#define	C_RS_DSR	0x00000200	/* DSR */
+#define	C_RS_RI		0x00000400	/* RI */
+#define	C_RS_CTS	0x00000800	/* CTS */
+
+/* commands Host <-> Board */
+
+#define	C_CM_RESET	0x01		/* reset/flush buffers */
+#define	C_CM_IOCTL	0x02		/* re-read CH_CTRL */
+#define	C_CM_IOCTLW	0x03		/* re-read CH_CTRL, intr when done */
+#define	C_CM_IOCTLM	0x04		/* RS-232 outputs change */
+#define	C_CM_SENDXOFF	0x10		/* send Xoff */
+#define	C_CM_SENDXON	0x11		/* send Xon */
+#define C_CM_CLFLOW	0x12		/* Clear flow control (resume) */
+#define	C_CM_SENDBRK	0x41		/* send break */
+#define	C_CM_INTBACK	0x42		/* Interrupt back */
+#define	C_CM_SET_BREAK	0x43		/* Tx break on */
+#define	C_CM_CLR_BREAK	0x44		/* Tx break off */
+#define	C_CM_CMD_DONE	0x45		/* Previous command done */
+#define C_CM_INTBACK2	0x46		/* Alternate Interrupt back */
+#define	C_CM_TINACT	0x51		/* set inactivity detection */
+#define	C_CM_IRQ_ENBL	0x52		/* enable generation of interrupts */
+#define	C_CM_IRQ_DSBL	0x53		/* disable generation of interrupts */
+#define	C_CM_ACK_ENBL	0x54		/* enable acknowledged interrupt mode */
+#define	C_CM_ACK_DSBL	0x55		/* disable acknowledged intr mode */
+#define	C_CM_FLUSH_RX	0x56		/* flushes Rx buffer */
+#define	C_CM_FLUSH_TX	0x57		/* flushes Tx buffer */
+#define C_CM_Q_ENABLE	0x58		/* enables queue access from the 
+					   driver */
+#define C_CM_Q_DISABLE  0x59            /* disables queue access from the 
+					   driver */
+
+#define	C_CM_TXBEMPTY	0x60		/* Tx buffer is empty */
+#define	C_CM_TXLOWWM	0x61		/* Tx buffer low water mark */
+#define	C_CM_RXHIWM	0x62		/* Rx buffer high water mark */
+#define	C_CM_RXNNDT	0x63		/* rx no new data timeout */
+#define	C_CM_TXFEMPTY	0x64
+#define	C_CM_ICHAR	0x65
+#define	C_CM_MDCD	0x70		/* modem DCD change */
+#define	C_CM_MDSR	0x71		/* modem DSR change */
+#define	C_CM_MRI	0x72		/* modem RI change */
+#define	C_CM_MCTS	0x73		/* modem CTS change */
+#define C_CM_MRTS	0x74		/* modem RTS drop */
+#define	C_CM_RXBRK	0x84		/* Break received */
+#define	C_CM_PR_ERROR	0x85		/* Parity error */
+#define	C_CM_FR_ERROR	0x86		/* Frame error */
+#define C_CM_OVR_ERROR  0x87            /* Overrun error */
+#define C_CM_RXOFL	0x88            /* RX buffer overflow */
+#define	C_CM_CMDERROR	0x90		/* command error */
+#define	C_CM_FATAL	0x91		/* fatal error */
+#define	C_CM_HW_RESET	0x92		/* reset board */
+
+/*
+ *	CH_CTRL - This per port structure contains all parameters
+ *	that control an specific port. It can be seen as the
+ *	configuration registers of a "super-serial-controller".
+ */
+
+struct CH_CTRL {
+	__u32	op_mode;	/* operation mode */
+	__u32	intr_enable;	/* interrupt masking */
+	__u32	sw_flow;	/* SW flow control */
+	__u32	flow_status;	/* output flow status */
+	__u32	comm_baud;	/* baud rate  - numerically specified */
+	__u32	comm_parity;	/* parity */
+	__u32	comm_data_l;	/* data length/stop */
+	__u32	comm_flags;	/* other flags */
+	__u32	hw_flow;	/* HW flow control */
+	__u32	rs_control;	/* RS-232 outputs */
+	__u32	rs_status;	/* RS-232 inputs */
+	__u32	flow_xon;	/* xon char */
+	__u32	flow_xoff;	/* xoff char */
+	__u32	hw_overflow;	/* hw overflow counter */
+	__u32	sw_overflow;	/* sw overflow counter */
+	__u32	comm_error;	/* frame/parity error counter */
+	__u32 ichar;
+	__u32 filler[7];
+};
+
+
+/*
+ *	BUF_CTRL - This per channel structure contains
+ *	all Tx and Rx buffer control for a given channel.
+ */
+
+struct	BUF_CTRL	{
+	__u32	flag_dma;	/* buffers are in Host memory */
+	__u32	tx_bufaddr;	/* address of the tx buffer */
+	__u32	tx_bufsize;	/* tx buffer size */
+	__u32	tx_threshold;	/* tx low water mark */
+	__u32	tx_get;		/* tail index tx buf */
+	__u32	tx_put;		/* head index tx buf */
+	__u32	rx_bufaddr;	/* address of the rx buffer */
+	__u32	rx_bufsize;	/* rx buffer size */
+	__u32	rx_threshold;	/* rx high water mark */
+	__u32	rx_get;		/* tail index rx buf */
+	__u32	rx_put;		/* head index rx buf */
+	__u32	filler[5];	/* filler to align structures */
+};
+
+/*
+ *	BOARD_CTRL - This per board structure contains all global 
+ *	control fields related to the board.
+ */
+
+struct BOARD_CTRL {
+
+	/* static info provided by the on-board CPU */
+	__u32	n_channel;	/* number of channels */
+	__u32	fw_version;	/* firmware version */
+
+	/* static info provided by the driver */
+	__u32	op_system;	/* op_system id */
+	__u32	dr_version;	/* driver version */
+
+	/* board control area */
+	__u32	inactivity;	/* inactivity control */
+
+	/* host to FW commands */
+	__u32	hcmd_channel;	/* channel number */
+	__u32	hcmd_param;	/* pointer to parameters */
+
+	/* FW to Host commands */
+	__u32	fwcmd_channel;	/* channel number */
+	__u32	fwcmd_param;	/* pointer to parameters */
+	__u32	zf_int_queue_addr; /* offset for INT_QUEUE structure */
+
+	/* filler so the structures are aligned */
+	__u32	filler[6];
+};
+
+/* Host Interrupt Queue */
+
+#define QUEUE_SIZE	(10*MAX_CHAN)
+
+struct	INT_QUEUE {
+	unsigned char	intr_code[QUEUE_SIZE];
+	unsigned long	channel[QUEUE_SIZE];
+	unsigned long	param[QUEUE_SIZE];
+	unsigned long	put;
+	unsigned long	get;
+};
+
+/*
+ *	ZFW_CTRL - This is the data structure that includes all other
+ *	data structures used by the Firmware.
+ */
+ 
+struct ZFW_CTRL {
+	struct BOARD_CTRL	board_ctrl;
+	struct CH_CTRL		ch_ctrl[MAX_CHAN];
+	struct BUF_CTRL		buf_ctrl[MAX_CHAN];
+};
+
+/****************** ****************** *******************/
+#endif
+
+#endif /* _UAPI_LINUX_CYCLADES_H */
diff --git a/include/uapi/linux/cycx_cfm.h b/include/uapi/linux/cycx_cfm.h
new file mode 100644
index 00000000000..032d26ed838
--- /dev/null
+++ b/include/uapi/linux/cycx_cfm.h
@@ -0,0 +1,101 @@
+/*
+* cycx_cfm.h	Cyclom 2X WAN Link Driver.
+*		Definitions for the Cyclom 2X Firmware Module (CFM).
+*
+* Author:	Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+*
+* Copyright:	(c) 1998-2003 Arnaldo Carvalho de Melo
+*
+* Based on sdlasfm.h by Gene Kozin <74604.152@compuserve.com>
+*
+*		This program is free software; you can redistribute it and/or
+*		modify it under the terms of the GNU General Public License
+*		as published by the Free Software Foundation; either version
+*		2 of the License, or (at your option) any later version.
+* ============================================================================
+* 1998/08/08	acme		Initial version.
+*/
+#ifndef	_CYCX_CFM_H
+#define	_CYCX_CFM_H
+
+/* Defines */
+
+#define	CFM_VERSION	2
+#define	CFM_SIGNATURE	"CFM - Cyclades CYCX Firmware Module"
+
+/* min/max */
+#define	CFM_IMAGE_SIZE	0x20000	/* max size of CYCX code image file */
+#define	CFM_DESCR_LEN	256	/* max length of description string */
+#define	CFM_MAX_CYCX	1	/* max number of compatible adapters */
+#define	CFM_LOAD_BUFSZ	0x400	/* buffer size for reset code (buffer_load) */
+
+/* Firmware Commands */
+#define GEN_POWER_ON	0x1280
+
+#define GEN_SET_SEG	0x1401	/* boot segment setting. */
+#define GEN_BOOT_DAT	0x1402	/* boot data. */
+#define GEN_START	0x1403	/* board start. */
+#define GEN_DEFPAR	0x1404	/* buffer length for boot. */
+
+/* Adapter Types */
+#define CYCX_2X		2
+/* for now only the 2X is supported, no plans to support 8X or 16X */
+#define CYCX_8X		8
+#define CYCX_16X	16
+
+#define	CFID_X25_2X	5200
+
+/**
+ *	struct cycx_fw_info - firmware module information.
+ *	@codeid - firmware ID
+ *	@version - firmware version number
+ *	@adapter - compatible adapter types
+ *	@memsize - minimum memory size
+ *	@reserved - reserved
+ *	@startoffs - entry point offset
+ *	@winoffs - dual-port memory window offset
+ *	@codeoffs - code load offset
+ *	@codesize - code size
+ *	@dataoffs - configuration data load offset
+ *	@datasize - configuration data size
+ */
+struct cycx_fw_info {
+	unsigned short	codeid;
+	unsigned short	version;
+	unsigned short	adapter[CFM_MAX_CYCX];
+	unsigned long	memsize;
+	unsigned short	reserved[2];
+	unsigned short	startoffs;
+	unsigned short	winoffs;
+	unsigned short	codeoffs;
+	unsigned long	codesize;
+	unsigned short	dataoffs;
+	unsigned long	datasize;
+};
+
+/**
+ *	struct cycx_firmware - CYCX firmware file structure
+ *	@signature - CFM file signature
+ *	@version - file format version
+ *	@checksum - info + image
+ *	@reserved - reserved
+ *	@descr - description string
+ *	@info - firmware module info
+ *	@image - code image (variable size)
+ */
+struct cycx_firmware {
+	char		    signature[80];
+	unsigned short	    version;
+	unsigned short	    checksum;
+	unsigned short	    reserved[6];
+	char		    descr[CFM_DESCR_LEN];
+	struct cycx_fw_info info;
+	unsigned char	    image[0];
+};
+
+struct cycx_fw_header {
+	unsigned long  reset_size;
+	unsigned long  data_size;
+	unsigned long  code_size;
+};
+#endif	/* _CYCX_CFM_H */
diff --git a/include/uapi/linux/dcbnl.h b/include/uapi/linux/dcbnl.h
new file mode 100644
index 00000000000..6bb43382f3f
--- /dev/null
+++ b/include/uapi/linux/dcbnl.h
@@ -0,0 +1,684 @@
+/*
+ * Copyright (c) 2008-2011, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * Author: Lucy Liu <lucy.liu@intel.com>
+ */
+
+#ifndef __LINUX_DCBNL_H__
+#define __LINUX_DCBNL_H__
+
+#include <linux/types.h>
+
+/* IEEE 802.1Qaz std supported values */
+#define IEEE_8021QAZ_MAX_TCS	8
+
+#define IEEE_8021QAZ_TSA_STRICT		0
+#define IEEE_8021QAZ_TSA_CB_SHAPER	1
+#define IEEE_8021QAZ_TSA_ETS		2
+#define IEEE_8021QAZ_TSA_VENDOR		255
+
+/* This structure contains the IEEE 802.1Qaz ETS managed object
+ *
+ * @willing: willing bit in ETS configuration TLV
+ * @ets_cap: indicates supported capacity of ets feature
+ * @cbs: credit based shaper ets algorithm supported
+ * @tc_tx_bw: tc tx bandwidth indexed by traffic class
+ * @tc_rx_bw: tc rx bandwidth indexed by traffic class
+ * @tc_tsa: TSA Assignment table, indexed by traffic class
+ * @prio_tc: priority assignment table mapping 8021Qp to traffic class
+ * @tc_reco_bw: recommended tc bandwidth indexed by traffic class for TLV
+ * @tc_reco_tsa: recommended tc bandwidth indexed by traffic class for TLV
+ * @reco_prio_tc: recommended tc tx bandwidth indexed by traffic class for TLV
+ *
+ * Recommended values are used to set fields in the ETS recommendation TLV
+ * with hardware offloaded LLDP.
+ *
+ * ----
+ *  TSA Assignment 8 bit identifiers
+ *	0	strict priority
+ *	1	credit-based shaper
+ *	2	enhanced transmission selection
+ *	3-254	reserved
+ *	255	vendor specific
+ */
+struct ieee_ets {
+	__u8	willing;
+	__u8	ets_cap;
+	__u8	cbs;
+	__u8	tc_tx_bw[IEEE_8021QAZ_MAX_TCS];
+	__u8	tc_rx_bw[IEEE_8021QAZ_MAX_TCS];
+	__u8	tc_tsa[IEEE_8021QAZ_MAX_TCS];
+	__u8	prio_tc[IEEE_8021QAZ_MAX_TCS];
+	__u8	tc_reco_bw[IEEE_8021QAZ_MAX_TCS];
+	__u8	tc_reco_tsa[IEEE_8021QAZ_MAX_TCS];
+	__u8	reco_prio_tc[IEEE_8021QAZ_MAX_TCS];
+};
+
+/* This structure contains rate limit extension to the IEEE 802.1Qaz ETS
+ * managed object.
+ * Values are 64 bits long and specified in Kbps to enable usage over both
+ * slow and very fast networks.
+ *
+ * @tc_maxrate: maximal tc tx bandwidth indexed by traffic class
+ */
+struct ieee_maxrate {
+	__u64	tc_maxrate[IEEE_8021QAZ_MAX_TCS];
+};
+
+/* This structure contains the IEEE 802.1Qaz PFC managed object
+ *
+ * @pfc_cap: Indicates the number of traffic classes on the local device
+ *	     that may simultaneously have PFC enabled.
+ * @pfc_en: bitmap indicating pfc enabled traffic classes
+ * @mbc: enable macsec bypass capability
+ * @delay: the allowance made for a round-trip propagation delay of the
+ *	   link in bits.
+ * @requests: count of the sent pfc frames
+ * @indications: count of the received pfc frames
+ */
+struct ieee_pfc {
+	__u8	pfc_cap;
+	__u8	pfc_en;
+	__u8	mbc;
+	__u16	delay;
+	__u64	requests[IEEE_8021QAZ_MAX_TCS];
+	__u64	indications[IEEE_8021QAZ_MAX_TCS];
+};
+
+/* CEE DCBX std supported values */
+#define CEE_DCBX_MAX_PGS	8
+#define CEE_DCBX_MAX_PRIO	8
+
+/**
+ * struct cee_pg - CEE Priority-Group managed object
+ *
+ * @willing: willing bit in the PG tlv
+ * @error: error bit in the PG tlv
+ * @pg_en: enable bit of the PG feature
+ * @tcs_supported: number of traffic classes supported
+ * @pg_bw: bandwidth percentage for each priority group
+ * @prio_pg: priority to PG mapping indexed by priority
+ */
+struct cee_pg {
+	__u8    willing;
+	__u8    error;
+	__u8    pg_en;
+	__u8    tcs_supported;
+	__u8    pg_bw[CEE_DCBX_MAX_PGS];
+	__u8    prio_pg[CEE_DCBX_MAX_PGS];
+};
+
+/**
+ * struct cee_pfc - CEE PFC managed object
+ *
+ * @willing: willing bit in the PFC tlv
+ * @error: error bit in the PFC tlv
+ * @pfc_en: bitmap indicating pfc enabled traffic classes
+ * @tcs_supported: number of traffic classes supported
+ */
+struct cee_pfc {
+	__u8    willing;
+	__u8    error;
+	__u8    pfc_en;
+	__u8    tcs_supported;
+};
+
+/* IEEE 802.1Qaz std supported values */
+#define IEEE_8021QAZ_APP_SEL_ETHERTYPE	1
+#define IEEE_8021QAZ_APP_SEL_STREAM	2
+#define IEEE_8021QAZ_APP_SEL_DGRAM	3
+#define IEEE_8021QAZ_APP_SEL_ANY	4
+
+/* This structure contains the IEEE 802.1Qaz APP managed object. This
+ * object is also used for the CEE std as well. There is no difference
+ * between the objects.
+ *
+ * @selector: protocol identifier type
+ * @protocol: protocol of type indicated
+ * @priority: 3-bit unsigned integer indicating priority
+ *
+ * ----
+ *  Selector field values
+ *	0	Reserved
+ *	1	Ethertype
+ *	2	Well known port number over TCP or SCTP
+ *	3	Well known port number over UDP or DCCP
+ *	4	Well known port number over TCP, SCTP, UDP, or DCCP
+ *	5-7	Reserved
+ */
+struct dcb_app {
+	__u8	selector;
+	__u8	priority;
+	__u16	protocol;
+};
+
+/**
+ * struct dcb_peer_app_info - APP feature information sent by the peer
+ *
+ * @willing: willing bit in the peer APP tlv
+ * @error: error bit in the peer APP tlv
+ *
+ * In addition to this information the full peer APP tlv also contains
+ * a table of 'app_count' APP objects defined above.
+ */
+struct dcb_peer_app_info {
+	__u8	willing;
+	__u8	error;
+};
+
+struct dcbmsg {
+	__u8               dcb_family;
+	__u8               cmd;
+	__u16              dcb_pad;
+};
+
+/**
+ * enum dcbnl_commands - supported DCB commands
+ *
+ * @DCB_CMD_UNDEFINED: unspecified command to catch errors
+ * @DCB_CMD_GSTATE: request the state of DCB in the device
+ * @DCB_CMD_SSTATE: set the state of DCB in the device
+ * @DCB_CMD_PGTX_GCFG: request the priority group configuration for Tx
+ * @DCB_CMD_PGTX_SCFG: set the priority group configuration for Tx
+ * @DCB_CMD_PGRX_GCFG: request the priority group configuration for Rx
+ * @DCB_CMD_PGRX_SCFG: set the priority group configuration for Rx
+ * @DCB_CMD_PFC_GCFG: request the priority flow control configuration
+ * @DCB_CMD_PFC_SCFG: set the priority flow control configuration
+ * @DCB_CMD_SET_ALL: apply all changes to the underlying device
+ * @DCB_CMD_GPERM_HWADDR: get the permanent MAC address of the underlying
+ *                        device.  Only useful when using bonding.
+ * @DCB_CMD_GCAP: request the DCB capabilities of the device
+ * @DCB_CMD_GNUMTCS: get the number of traffic classes currently supported
+ * @DCB_CMD_SNUMTCS: set the number of traffic classes
+ * @DCB_CMD_GBCN: set backward congestion notification configuration
+ * @DCB_CMD_SBCN: get backward congestion notification configration.
+ * @DCB_CMD_GAPP: get application protocol configuration
+ * @DCB_CMD_SAPP: set application protocol configuration
+ * @DCB_CMD_IEEE_SET: set IEEE 802.1Qaz configuration
+ * @DCB_CMD_IEEE_GET: get IEEE 802.1Qaz configuration
+ * @DCB_CMD_GDCBX: get DCBX engine configuration
+ * @DCB_CMD_SDCBX: set DCBX engine configuration
+ * @DCB_CMD_GFEATCFG: get DCBX features flags
+ * @DCB_CMD_SFEATCFG: set DCBX features negotiation flags
+ * @DCB_CMD_CEE_GET: get CEE aggregated configuration
+ * @DCB_CMD_IEEE_DEL: delete IEEE 802.1Qaz configuration
+ */
+enum dcbnl_commands {
+	DCB_CMD_UNDEFINED,
+
+	DCB_CMD_GSTATE,
+	DCB_CMD_SSTATE,
+
+	DCB_CMD_PGTX_GCFG,
+	DCB_CMD_PGTX_SCFG,
+	DCB_CMD_PGRX_GCFG,
+	DCB_CMD_PGRX_SCFG,
+
+	DCB_CMD_PFC_GCFG,
+	DCB_CMD_PFC_SCFG,
+
+	DCB_CMD_SET_ALL,
+
+	DCB_CMD_GPERM_HWADDR,
+
+	DCB_CMD_GCAP,
+
+	DCB_CMD_GNUMTCS,
+	DCB_CMD_SNUMTCS,
+
+	DCB_CMD_PFC_GSTATE,
+	DCB_CMD_PFC_SSTATE,
+
+	DCB_CMD_BCN_GCFG,
+	DCB_CMD_BCN_SCFG,
+
+	DCB_CMD_GAPP,
+	DCB_CMD_SAPP,
+
+	DCB_CMD_IEEE_SET,
+	DCB_CMD_IEEE_GET,
+
+	DCB_CMD_GDCBX,
+	DCB_CMD_SDCBX,
+
+	DCB_CMD_GFEATCFG,
+	DCB_CMD_SFEATCFG,
+
+	DCB_CMD_CEE_GET,
+	DCB_CMD_IEEE_DEL,
+
+	__DCB_CMD_ENUM_MAX,
+	DCB_CMD_MAX = __DCB_CMD_ENUM_MAX - 1,
+};
+
+/**
+ * enum dcbnl_attrs - DCB top-level netlink attributes
+ *
+ * @DCB_ATTR_UNDEFINED: unspecified attribute to catch errors
+ * @DCB_ATTR_IFNAME: interface name of the underlying device (NLA_STRING)
+ * @DCB_ATTR_STATE: enable state of DCB in the device (NLA_U8)
+ * @DCB_ATTR_PFC_STATE: enable state of PFC in the device (NLA_U8)
+ * @DCB_ATTR_PFC_CFG: priority flow control configuration (NLA_NESTED)
+ * @DCB_ATTR_NUM_TC: number of traffic classes supported in the device (NLA_U8)
+ * @DCB_ATTR_PG_CFG: priority group configuration (NLA_NESTED)
+ * @DCB_ATTR_SET_ALL: bool to commit changes to hardware or not (NLA_U8)
+ * @DCB_ATTR_PERM_HWADDR: MAC address of the physical device (NLA_NESTED)
+ * @DCB_ATTR_CAP: DCB capabilities of the device (NLA_NESTED)
+ * @DCB_ATTR_NUMTCS: number of traffic classes supported (NLA_NESTED)
+ * @DCB_ATTR_BCN: backward congestion notification configuration (NLA_NESTED)
+ * @DCB_ATTR_IEEE: IEEE 802.1Qaz supported attributes (NLA_NESTED)
+ * @DCB_ATTR_DCBX: DCBX engine configuration in the device (NLA_U8)
+ * @DCB_ATTR_FEATCFG: DCBX features flags (NLA_NESTED)
+ * @DCB_ATTR_CEE: CEE std supported attributes (NLA_NESTED)
+ */
+enum dcbnl_attrs {
+	DCB_ATTR_UNDEFINED,
+
+	DCB_ATTR_IFNAME,
+	DCB_ATTR_STATE,
+	DCB_ATTR_PFC_STATE,
+	DCB_ATTR_PFC_CFG,
+	DCB_ATTR_NUM_TC,
+	DCB_ATTR_PG_CFG,
+	DCB_ATTR_SET_ALL,
+	DCB_ATTR_PERM_HWADDR,
+	DCB_ATTR_CAP,
+	DCB_ATTR_NUMTCS,
+	DCB_ATTR_BCN,
+	DCB_ATTR_APP,
+
+	/* IEEE std attributes */
+	DCB_ATTR_IEEE,
+
+	DCB_ATTR_DCBX,
+	DCB_ATTR_FEATCFG,
+
+	/* CEE nested attributes */
+	DCB_ATTR_CEE,
+
+	__DCB_ATTR_ENUM_MAX,
+	DCB_ATTR_MAX = __DCB_ATTR_ENUM_MAX - 1,
+};
+
+/**
+ * enum ieee_attrs - IEEE 802.1Qaz get/set attributes
+ *
+ * @DCB_ATTR_IEEE_UNSPEC: unspecified
+ * @DCB_ATTR_IEEE_ETS: negotiated ETS configuration
+ * @DCB_ATTR_IEEE_PFC: negotiated PFC configuration
+ * @DCB_ATTR_IEEE_APP_TABLE: negotiated APP configuration
+ * @DCB_ATTR_IEEE_PEER_ETS: peer ETS configuration - get only
+ * @DCB_ATTR_IEEE_PEER_PFC: peer PFC configuration - get only
+ * @DCB_ATTR_IEEE_PEER_APP: peer APP tlv - get only
+ */
+enum ieee_attrs {
+	DCB_ATTR_IEEE_UNSPEC,
+	DCB_ATTR_IEEE_ETS,
+	DCB_ATTR_IEEE_PFC,
+	DCB_ATTR_IEEE_APP_TABLE,
+	DCB_ATTR_IEEE_PEER_ETS,
+	DCB_ATTR_IEEE_PEER_PFC,
+	DCB_ATTR_IEEE_PEER_APP,
+	DCB_ATTR_IEEE_MAXRATE,
+	__DCB_ATTR_IEEE_MAX
+};
+#define DCB_ATTR_IEEE_MAX (__DCB_ATTR_IEEE_MAX - 1)
+
+enum ieee_attrs_app {
+	DCB_ATTR_IEEE_APP_UNSPEC,
+	DCB_ATTR_IEEE_APP,
+	__DCB_ATTR_IEEE_APP_MAX
+};
+#define DCB_ATTR_IEEE_APP_MAX (__DCB_ATTR_IEEE_APP_MAX - 1)
+
+/**
+ * enum cee_attrs - CEE DCBX get attributes.
+ *
+ * @DCB_ATTR_CEE_UNSPEC: unspecified
+ * @DCB_ATTR_CEE_PEER_PG: peer PG configuration - get only
+ * @DCB_ATTR_CEE_PEER_PFC: peer PFC configuration - get only
+ * @DCB_ATTR_CEE_PEER_APP_TABLE: peer APP tlv - get only
+ * @DCB_ATTR_CEE_TX_PG: TX PG configuration (DCB_CMD_PGTX_GCFG)
+ * @DCB_ATTR_CEE_RX_PG: RX PG configuration (DCB_CMD_PGRX_GCFG)
+ * @DCB_ATTR_CEE_PFC: PFC configuration (DCB_CMD_PFC_GCFG)
+ * @DCB_ATTR_CEE_APP_TABLE: APP configuration (multi DCB_CMD_GAPP)
+ * @DCB_ATTR_CEE_FEAT: DCBX features flags (DCB_CMD_GFEATCFG)
+ *
+ * An aggregated collection of the cee std negotiated parameters.
+ */
+enum cee_attrs {
+	DCB_ATTR_CEE_UNSPEC,
+	DCB_ATTR_CEE_PEER_PG,
+	DCB_ATTR_CEE_PEER_PFC,
+	DCB_ATTR_CEE_PEER_APP_TABLE,
+	DCB_ATTR_CEE_TX_PG,
+	DCB_ATTR_CEE_RX_PG,
+	DCB_ATTR_CEE_PFC,
+	DCB_ATTR_CEE_APP_TABLE,
+	DCB_ATTR_CEE_FEAT,
+	__DCB_ATTR_CEE_MAX
+};
+#define DCB_ATTR_CEE_MAX (__DCB_ATTR_CEE_MAX - 1)
+
+enum peer_app_attr {
+	DCB_ATTR_CEE_PEER_APP_UNSPEC,
+	DCB_ATTR_CEE_PEER_APP_INFO,
+	DCB_ATTR_CEE_PEER_APP,
+	__DCB_ATTR_CEE_PEER_APP_MAX
+};
+#define DCB_ATTR_CEE_PEER_APP_MAX (__DCB_ATTR_CEE_PEER_APP_MAX - 1)
+
+enum cee_attrs_app {
+	DCB_ATTR_CEE_APP_UNSPEC,
+	DCB_ATTR_CEE_APP,
+	__DCB_ATTR_CEE_APP_MAX
+};
+#define DCB_ATTR_CEE_APP_MAX (__DCB_ATTR_CEE_APP_MAX - 1)
+
+/**
+ * enum dcbnl_pfc_attrs - DCB Priority Flow Control user priority nested attrs
+ *
+ * @DCB_PFC_UP_ATTR_UNDEFINED: unspecified attribute to catch errors
+ * @DCB_PFC_UP_ATTR_0: Priority Flow Control value for User Priority 0 (NLA_U8)
+ * @DCB_PFC_UP_ATTR_1: Priority Flow Control value for User Priority 1 (NLA_U8)
+ * @DCB_PFC_UP_ATTR_2: Priority Flow Control value for User Priority 2 (NLA_U8)
+ * @DCB_PFC_UP_ATTR_3: Priority Flow Control value for User Priority 3 (NLA_U8)
+ * @DCB_PFC_UP_ATTR_4: Priority Flow Control value for User Priority 4 (NLA_U8)
+ * @DCB_PFC_UP_ATTR_5: Priority Flow Control value for User Priority 5 (NLA_U8)
+ * @DCB_PFC_UP_ATTR_6: Priority Flow Control value for User Priority 6 (NLA_U8)
+ * @DCB_PFC_UP_ATTR_7: Priority Flow Control value for User Priority 7 (NLA_U8)
+ * @DCB_PFC_UP_ATTR_MAX: highest attribute number currently defined
+ * @DCB_PFC_UP_ATTR_ALL: apply to all priority flow control attrs (NLA_FLAG)
+ *
+ */
+enum dcbnl_pfc_up_attrs {
+	DCB_PFC_UP_ATTR_UNDEFINED,
+
+	DCB_PFC_UP_ATTR_0,
+	DCB_PFC_UP_ATTR_1,
+	DCB_PFC_UP_ATTR_2,
+	DCB_PFC_UP_ATTR_3,
+	DCB_PFC_UP_ATTR_4,
+	DCB_PFC_UP_ATTR_5,
+	DCB_PFC_UP_ATTR_6,
+	DCB_PFC_UP_ATTR_7,
+	DCB_PFC_UP_ATTR_ALL,
+
+	__DCB_PFC_UP_ATTR_ENUM_MAX,
+	DCB_PFC_UP_ATTR_MAX = __DCB_PFC_UP_ATTR_ENUM_MAX - 1,
+};
+
+/**
+ * enum dcbnl_pg_attrs - DCB Priority Group attributes
+ *
+ * @DCB_PG_ATTR_UNDEFINED: unspecified attribute to catch errors
+ * @DCB_PG_ATTR_TC_0: Priority Group Traffic Class 0 configuration (NLA_NESTED)
+ * @DCB_PG_ATTR_TC_1: Priority Group Traffic Class 1 configuration (NLA_NESTED)
+ * @DCB_PG_ATTR_TC_2: Priority Group Traffic Class 2 configuration (NLA_NESTED)
+ * @DCB_PG_ATTR_TC_3: Priority Group Traffic Class 3 configuration (NLA_NESTED)
+ * @DCB_PG_ATTR_TC_4: Priority Group Traffic Class 4 configuration (NLA_NESTED)
+ * @DCB_PG_ATTR_TC_5: Priority Group Traffic Class 5 configuration (NLA_NESTED)
+ * @DCB_PG_ATTR_TC_6: Priority Group Traffic Class 6 configuration (NLA_NESTED)
+ * @DCB_PG_ATTR_TC_7: Priority Group Traffic Class 7 configuration (NLA_NESTED)
+ * @DCB_PG_ATTR_TC_MAX: highest attribute number currently defined
+ * @DCB_PG_ATTR_TC_ALL: apply to all traffic classes (NLA_NESTED)
+ * @DCB_PG_ATTR_BW_ID_0: Percent of link bandwidth for Priority Group 0 (NLA_U8)
+ * @DCB_PG_ATTR_BW_ID_1: Percent of link bandwidth for Priority Group 1 (NLA_U8)
+ * @DCB_PG_ATTR_BW_ID_2: Percent of link bandwidth for Priority Group 2 (NLA_U8)
+ * @DCB_PG_ATTR_BW_ID_3: Percent of link bandwidth for Priority Group 3 (NLA_U8)
+ * @DCB_PG_ATTR_BW_ID_4: Percent of link bandwidth for Priority Group 4 (NLA_U8)
+ * @DCB_PG_ATTR_BW_ID_5: Percent of link bandwidth for Priority Group 5 (NLA_U8)
+ * @DCB_PG_ATTR_BW_ID_6: Percent of link bandwidth for Priority Group 6 (NLA_U8)
+ * @DCB_PG_ATTR_BW_ID_7: Percent of link bandwidth for Priority Group 7 (NLA_U8)
+ * @DCB_PG_ATTR_BW_ID_MAX: highest attribute number currently defined
+ * @DCB_PG_ATTR_BW_ID_ALL: apply to all priority groups (NLA_FLAG)
+ *
+ */
+enum dcbnl_pg_attrs {
+	DCB_PG_ATTR_UNDEFINED,
+
+	DCB_PG_ATTR_TC_0,
+	DCB_PG_ATTR_TC_1,
+	DCB_PG_ATTR_TC_2,
+	DCB_PG_ATTR_TC_3,
+	DCB_PG_ATTR_TC_4,
+	DCB_PG_ATTR_TC_5,
+	DCB_PG_ATTR_TC_6,
+	DCB_PG_ATTR_TC_7,
+	DCB_PG_ATTR_TC_MAX,
+	DCB_PG_ATTR_TC_ALL,
+
+	DCB_PG_ATTR_BW_ID_0,
+	DCB_PG_ATTR_BW_ID_1,
+	DCB_PG_ATTR_BW_ID_2,
+	DCB_PG_ATTR_BW_ID_3,
+	DCB_PG_ATTR_BW_ID_4,
+	DCB_PG_ATTR_BW_ID_5,
+	DCB_PG_ATTR_BW_ID_6,
+	DCB_PG_ATTR_BW_ID_7,
+	DCB_PG_ATTR_BW_ID_MAX,
+	DCB_PG_ATTR_BW_ID_ALL,
+
+	__DCB_PG_ATTR_ENUM_MAX,
+	DCB_PG_ATTR_MAX = __DCB_PG_ATTR_ENUM_MAX - 1,
+};
+
+/**
+ * enum dcbnl_tc_attrs - DCB Traffic Class attributes
+ *
+ * @DCB_TC_ATTR_PARAM_UNDEFINED: unspecified attribute to catch errors
+ * @DCB_TC_ATTR_PARAM_PGID: (NLA_U8) Priority group the traffic class belongs to
+ *                          Valid values are:  0-7
+ * @DCB_TC_ATTR_PARAM_UP_MAPPING: (NLA_U8) Traffic class to user priority map
+ *                                Some devices may not support changing the
+ *                                user priority map of a TC.
+ * @DCB_TC_ATTR_PARAM_STRICT_PRIO: (NLA_U8) Strict priority setting
+ *                                 0 - none
+ *                                 1 - group strict
+ *                                 2 - link strict
+ * @DCB_TC_ATTR_PARAM_BW_PCT: optional - (NLA_U8) If supported by the device and
+ *                            not configured to use link strict priority,
+ *                            this is the percentage of bandwidth of the
+ *                            priority group this traffic class belongs to
+ * @DCB_TC_ATTR_PARAM_ALL: (NLA_FLAG) all traffic class parameters
+ *
+ */
+enum dcbnl_tc_attrs {
+	DCB_TC_ATTR_PARAM_UNDEFINED,
+
+	DCB_TC_ATTR_PARAM_PGID,
+	DCB_TC_ATTR_PARAM_UP_MAPPING,
+	DCB_TC_ATTR_PARAM_STRICT_PRIO,
+	DCB_TC_ATTR_PARAM_BW_PCT,
+	DCB_TC_ATTR_PARAM_ALL,
+
+	__DCB_TC_ATTR_PARAM_ENUM_MAX,
+	DCB_TC_ATTR_PARAM_MAX = __DCB_TC_ATTR_PARAM_ENUM_MAX - 1,
+};
+
+/**
+ * enum dcbnl_cap_attrs - DCB Capability attributes
+ *
+ * @DCB_CAP_ATTR_UNDEFINED: unspecified attribute to catch errors
+ * @DCB_CAP_ATTR_ALL: (NLA_FLAG) all capability parameters
+ * @DCB_CAP_ATTR_PG: (NLA_U8) device supports Priority Groups
+ * @DCB_CAP_ATTR_PFC: (NLA_U8) device supports Priority Flow Control
+ * @DCB_CAP_ATTR_UP2TC: (NLA_U8) device supports user priority to
+ *                               traffic class mapping
+ * @DCB_CAP_ATTR_PG_TCS: (NLA_U8) bitmap where each bit represents a
+ *                                number of traffic classes the device
+ *                                can be configured to use for Priority Groups
+ * @DCB_CAP_ATTR_PFC_TCS: (NLA_U8) bitmap where each bit represents a
+ *                                 number of traffic classes the device can be
+ *                                 configured to use for Priority Flow Control
+ * @DCB_CAP_ATTR_GSP: (NLA_U8) device supports group strict priority
+ * @DCB_CAP_ATTR_BCN: (NLA_U8) device supports Backwards Congestion
+ *                             Notification
+ * @DCB_CAP_ATTR_DCBX: (NLA_U8) device supports DCBX engine
+ *
+ */
+enum dcbnl_cap_attrs {
+	DCB_CAP_ATTR_UNDEFINED,
+	DCB_CAP_ATTR_ALL,
+	DCB_CAP_ATTR_PG,
+	DCB_CAP_ATTR_PFC,
+	DCB_CAP_ATTR_UP2TC,
+	DCB_CAP_ATTR_PG_TCS,
+	DCB_CAP_ATTR_PFC_TCS,
+	DCB_CAP_ATTR_GSP,
+	DCB_CAP_ATTR_BCN,
+	DCB_CAP_ATTR_DCBX,
+
+	__DCB_CAP_ATTR_ENUM_MAX,
+	DCB_CAP_ATTR_MAX = __DCB_CAP_ATTR_ENUM_MAX - 1,
+};
+
+/**
+ * DCBX capability flags
+ *
+ * @DCB_CAP_DCBX_HOST: DCBX negotiation is performed by the host LLDP agent.
+ *                     'set' routines are used to configure the device with
+ *                     the negotiated parameters
+ *
+ * @DCB_CAP_DCBX_LLD_MANAGED: DCBX negotiation is not performed in the host but
+ *                            by another entity
+ *                            'get' routines are used to retrieve the
+ *                            negotiated parameters
+ *                            'set' routines can be used to set the initial
+ *                            negotiation configuration
+ *
+ * @DCB_CAP_DCBX_VER_CEE: for a non-host DCBX engine, indicates the engine
+ *                        supports the CEE protocol flavor
+ *
+ * @DCB_CAP_DCBX_VER_IEEE: for a non-host DCBX engine, indicates the engine
+ *                         supports the IEEE protocol flavor
+ *
+ * @DCB_CAP_DCBX_STATIC: for a non-host DCBX engine, indicates the engine
+ *                       supports static configuration (i.e no actual
+ *                       negotiation is performed negotiated parameters equal
+ *                       the initial configuration)
+ *
+ */
+#define DCB_CAP_DCBX_HOST		0x01
+#define DCB_CAP_DCBX_LLD_MANAGED	0x02
+#define DCB_CAP_DCBX_VER_CEE		0x04
+#define DCB_CAP_DCBX_VER_IEEE		0x08
+#define DCB_CAP_DCBX_STATIC		0x10
+
+/**
+ * enum dcbnl_numtcs_attrs - number of traffic classes
+ *
+ * @DCB_NUMTCS_ATTR_UNDEFINED: unspecified attribute to catch errors
+ * @DCB_NUMTCS_ATTR_ALL: (NLA_FLAG) all traffic class attributes
+ * @DCB_NUMTCS_ATTR_PG: (NLA_U8) number of traffic classes used for
+ *                               priority groups
+ * @DCB_NUMTCS_ATTR_PFC: (NLA_U8) number of traffic classes which can
+ *                                support priority flow control
+ */
+enum dcbnl_numtcs_attrs {
+	DCB_NUMTCS_ATTR_UNDEFINED,
+	DCB_NUMTCS_ATTR_ALL,
+	DCB_NUMTCS_ATTR_PG,
+	DCB_NUMTCS_ATTR_PFC,
+
+	__DCB_NUMTCS_ATTR_ENUM_MAX,
+	DCB_NUMTCS_ATTR_MAX = __DCB_NUMTCS_ATTR_ENUM_MAX - 1,
+};
+
+enum dcbnl_bcn_attrs{
+	DCB_BCN_ATTR_UNDEFINED = 0,
+
+	DCB_BCN_ATTR_RP_0,
+	DCB_BCN_ATTR_RP_1,
+	DCB_BCN_ATTR_RP_2,
+	DCB_BCN_ATTR_RP_3,
+	DCB_BCN_ATTR_RP_4,
+	DCB_BCN_ATTR_RP_5,
+	DCB_BCN_ATTR_RP_6,
+	DCB_BCN_ATTR_RP_7,
+	DCB_BCN_ATTR_RP_ALL,
+
+	DCB_BCN_ATTR_BCNA_0,
+	DCB_BCN_ATTR_BCNA_1,
+	DCB_BCN_ATTR_ALPHA,
+	DCB_BCN_ATTR_BETA,
+	DCB_BCN_ATTR_GD,
+	DCB_BCN_ATTR_GI,
+	DCB_BCN_ATTR_TMAX,
+	DCB_BCN_ATTR_TD,
+	DCB_BCN_ATTR_RMIN,
+	DCB_BCN_ATTR_W,
+	DCB_BCN_ATTR_RD,
+	DCB_BCN_ATTR_RU,
+	DCB_BCN_ATTR_WRTT,
+	DCB_BCN_ATTR_RI,
+	DCB_BCN_ATTR_C,
+	DCB_BCN_ATTR_ALL,
+
+	__DCB_BCN_ATTR_ENUM_MAX,
+	DCB_BCN_ATTR_MAX = __DCB_BCN_ATTR_ENUM_MAX - 1,
+};
+
+/**
+ * enum dcb_general_attr_values - general DCB attribute values
+ *
+ * @DCB_ATTR_UNDEFINED: value used to indicate an attribute is not supported
+ *
+ */
+enum dcb_general_attr_values {
+	DCB_ATTR_VALUE_UNDEFINED = 0xff
+};
+
+#define DCB_APP_IDTYPE_ETHTYPE	0x00
+#define DCB_APP_IDTYPE_PORTNUM	0x01
+enum dcbnl_app_attrs {
+	DCB_APP_ATTR_UNDEFINED,
+
+	DCB_APP_ATTR_IDTYPE,
+	DCB_APP_ATTR_ID,
+	DCB_APP_ATTR_PRIORITY,
+
+	__DCB_APP_ATTR_ENUM_MAX,
+	DCB_APP_ATTR_MAX = __DCB_APP_ATTR_ENUM_MAX - 1,
+};
+
+/**
+ * enum dcbnl_featcfg_attrs - features conifiguration flags
+ *
+ * @DCB_FEATCFG_ATTR_UNDEFINED: unspecified attribute to catch errors
+ * @DCB_FEATCFG_ATTR_ALL: (NLA_FLAG) all features configuration attributes
+ * @DCB_FEATCFG_ATTR_PG: (NLA_U8) configuration flags for priority groups
+ * @DCB_FEATCFG_ATTR_PFC: (NLA_U8) configuration flags for priority
+ *                                 flow control
+ * @DCB_FEATCFG_ATTR_APP: (NLA_U8) configuration flags for application TLV
+ *
+ */
+#define DCB_FEATCFG_ERROR	0x01	/* error in feature resolution */
+#define DCB_FEATCFG_ENABLE	0x02	/* enable feature */
+#define DCB_FEATCFG_WILLING	0x04	/* feature is willing */
+#define DCB_FEATCFG_ADVERTISE	0x08	/* advertise feature */
+enum dcbnl_featcfg_attrs {
+	DCB_FEATCFG_ATTR_UNDEFINED,
+	DCB_FEATCFG_ATTR_ALL,
+	DCB_FEATCFG_ATTR_PG,
+	DCB_FEATCFG_ATTR_PFC,
+	DCB_FEATCFG_ATTR_APP,
+
+	__DCB_FEATCFG_ATTR_ENUM_MAX,
+	DCB_FEATCFG_ATTR_MAX = __DCB_FEATCFG_ATTR_ENUM_MAX - 1,
+};
+
+#endif /* __LINUX_DCBNL_H__ */
diff --git a/include/uapi/linux/dccp.h b/include/uapi/linux/dccp.h
new file mode 100644
index 00000000000..52a9cd7307e
--- /dev/null
+++ b/include/uapi/linux/dccp.h
@@ -0,0 +1,237 @@
+#ifndef _UAPI_LINUX_DCCP_H
+#define _UAPI_LINUX_DCCP_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+/**
+ * struct dccp_hdr - generic part of DCCP packet header
+ *
+ * @dccph_sport - Relevant port on the endpoint that sent this packet
+ * @dccph_dport - Relevant port on the other endpoint
+ * @dccph_doff - Data Offset from the start of the DCCP header, in 32-bit words
+ * @dccph_ccval - Used by the HC-Sender CCID
+ * @dccph_cscov - Parts of the packet that are covered by the Checksum field
+ * @dccph_checksum - Internet checksum, depends on dccph_cscov
+ * @dccph_x - 0 = 24 bit sequence number, 1 = 48
+ * @dccph_type - packet type, see DCCP_PKT_ prefixed macros
+ * @dccph_seq - sequence number high or low order 24 bits, depends on dccph_x
+ */
+struct dccp_hdr {
+	__be16	dccph_sport,
+		dccph_dport;
+	__u8	dccph_doff;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8	dccph_cscov:4,
+		dccph_ccval:4;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	__u8	dccph_ccval:4,
+		dccph_cscov:4;
+#else
+#error  "Adjust your <asm/byteorder.h> defines"
+#endif
+	__sum16	dccph_checksum;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8	dccph_x:1,
+		dccph_type:4,
+		dccph_reserved:3;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	__u8	dccph_reserved:3,
+		dccph_type:4,
+		dccph_x:1;
+#else
+#error  "Adjust your <asm/byteorder.h> defines"
+#endif
+	__u8	dccph_seq2;
+	__be16	dccph_seq;
+};
+
+/**
+ * struct dccp_hdr_ext - the low bits of a 48 bit seq packet
+ *
+ * @dccph_seq_low - low 24 bits of a 48 bit seq packet
+ */
+struct dccp_hdr_ext {
+	__be32	dccph_seq_low;
+};
+
+/**
+ * struct dccp_hdr_request - Connection initiation request header
+ *
+ * @dccph_req_service - Service to which the client app wants to connect
+ */
+struct dccp_hdr_request {
+	__be32	dccph_req_service;
+};
+/**
+ * struct dccp_hdr_ack_bits - acknowledgment bits common to most packets
+ *
+ * @dccph_resp_ack_nr_high - 48 bit ack number high order bits, contains GSR
+ * @dccph_resp_ack_nr_low - 48 bit ack number low order bits, contains GSR
+ */
+struct dccp_hdr_ack_bits {
+	__be16	dccph_reserved1;
+	__be16	dccph_ack_nr_high;
+	__be32	dccph_ack_nr_low;
+};
+/**
+ * struct dccp_hdr_response - Connection initiation response header
+ *
+ * @dccph_resp_ack - 48 bit Acknowledgment Number Subheader (5.3)
+ * @dccph_resp_service - Echoes the Service Code on a received DCCP-Request
+ */
+struct dccp_hdr_response {
+	struct dccp_hdr_ack_bits	dccph_resp_ack;
+	__be32				dccph_resp_service;
+};
+
+/**
+ * struct dccp_hdr_reset - Unconditionally shut down a connection
+ *
+ * @dccph_reset_ack - 48 bit Acknowledgment Number Subheader (5.6)
+ * @dccph_reset_code - one of %dccp_reset_codes
+ * @dccph_reset_data - the Data 1 ... Data 3 fields from 5.6
+ */
+struct dccp_hdr_reset {
+	struct dccp_hdr_ack_bits	dccph_reset_ack;
+	__u8				dccph_reset_code,
+					dccph_reset_data[3];
+};
+
+enum dccp_pkt_type {
+	DCCP_PKT_REQUEST = 0,
+	DCCP_PKT_RESPONSE,
+	DCCP_PKT_DATA,
+	DCCP_PKT_ACK,
+	DCCP_PKT_DATAACK,
+	DCCP_PKT_CLOSEREQ,
+	DCCP_PKT_CLOSE,
+	DCCP_PKT_RESET,
+	DCCP_PKT_SYNC,
+	DCCP_PKT_SYNCACK,
+	DCCP_PKT_INVALID,
+};
+
+#define DCCP_NR_PKT_TYPES DCCP_PKT_INVALID
+
+static inline unsigned int dccp_packet_hdr_len(const __u8 type)
+{
+	if (type == DCCP_PKT_DATA)
+		return 0;
+	if (type == DCCP_PKT_DATAACK	||
+	    type == DCCP_PKT_ACK	||
+	    type == DCCP_PKT_SYNC	||
+	    type == DCCP_PKT_SYNCACK	||
+	    type == DCCP_PKT_CLOSE	||
+	    type == DCCP_PKT_CLOSEREQ)
+		return sizeof(struct dccp_hdr_ack_bits);
+	if (type == DCCP_PKT_REQUEST)
+		return sizeof(struct dccp_hdr_request);
+	if (type == DCCP_PKT_RESPONSE)
+		return sizeof(struct dccp_hdr_response);
+	return sizeof(struct dccp_hdr_reset);
+}
+enum dccp_reset_codes {
+	DCCP_RESET_CODE_UNSPECIFIED = 0,
+	DCCP_RESET_CODE_CLOSED,
+	DCCP_RESET_CODE_ABORTED,
+	DCCP_RESET_CODE_NO_CONNECTION,
+	DCCP_RESET_CODE_PACKET_ERROR,
+	DCCP_RESET_CODE_OPTION_ERROR,
+	DCCP_RESET_CODE_MANDATORY_ERROR,
+	DCCP_RESET_CODE_CONNECTION_REFUSED,
+	DCCP_RESET_CODE_BAD_SERVICE_CODE,
+	DCCP_RESET_CODE_TOO_BUSY,
+	DCCP_RESET_CODE_BAD_INIT_COOKIE,
+	DCCP_RESET_CODE_AGGRESSION_PENALTY,
+
+	DCCP_MAX_RESET_CODES		/* Leave at the end!  */
+};
+
+/* DCCP options */
+enum {
+	DCCPO_PADDING = 0,
+	DCCPO_MANDATORY = 1,
+	DCCPO_MIN_RESERVED = 3,
+	DCCPO_MAX_RESERVED = 31,
+	DCCPO_CHANGE_L = 32,
+	DCCPO_CONFIRM_L = 33,
+	DCCPO_CHANGE_R = 34,
+	DCCPO_CONFIRM_R = 35,
+	DCCPO_NDP_COUNT = 37,
+	DCCPO_ACK_VECTOR_0 = 38,
+	DCCPO_ACK_VECTOR_1 = 39,
+	DCCPO_TIMESTAMP = 41,
+	DCCPO_TIMESTAMP_ECHO = 42,
+	DCCPO_ELAPSED_TIME = 43,
+	DCCPO_MAX = 45,
+	DCCPO_MIN_RX_CCID_SPECIFIC = 128,	/* from sender to receiver */
+	DCCPO_MAX_RX_CCID_SPECIFIC = 191,
+	DCCPO_MIN_TX_CCID_SPECIFIC = 192,	/* from receiver to sender */
+	DCCPO_MAX_TX_CCID_SPECIFIC = 255,
+};
+/* maximum size of a single TLV-encoded DCCP option (sans type/len bytes) */
+#define DCCP_SINGLE_OPT_MAXLEN	253
+
+/* DCCP CCIDS */
+enum {
+	DCCPC_CCID2 = 2,
+	DCCPC_CCID3 = 3,
+};
+
+/* DCCP features (RFC 4340 section 6.4) */
+enum dccp_feature_numbers {
+	DCCPF_RESERVED = 0,
+	DCCPF_CCID = 1,
+	DCCPF_SHORT_SEQNOS = 2,
+	DCCPF_SEQUENCE_WINDOW = 3,
+	DCCPF_ECN_INCAPABLE = 4,
+	DCCPF_ACK_RATIO = 5,
+	DCCPF_SEND_ACK_VECTOR = 6,
+	DCCPF_SEND_NDP_COUNT = 7,
+	DCCPF_MIN_CSUM_COVER = 8,
+	DCCPF_DATA_CHECKSUM = 9,
+	/* 10-127 reserved */
+	DCCPF_MIN_CCID_SPECIFIC = 128,
+	DCCPF_SEND_LEV_RATE = 192,	/* RFC 4342, sec. 8.4 */
+	DCCPF_MAX_CCID_SPECIFIC = 255,
+};
+
+/* DCCP socket control message types for cmsg */
+enum dccp_cmsg_type {
+	DCCP_SCM_PRIORITY = 1,
+	DCCP_SCM_QPOLICY_MAX = 0xFFFF,
+	/* ^-- Up to here reserved exclusively for qpolicy parameters */
+	DCCP_SCM_MAX
+};
+
+/* DCCP priorities for outgoing/queued packets */
+enum dccp_packet_dequeueing_policy {
+	DCCPQ_POLICY_SIMPLE,
+	DCCPQ_POLICY_PRIO,
+	DCCPQ_POLICY_MAX
+};
+
+/* DCCP socket options */
+#define DCCP_SOCKOPT_PACKET_SIZE	1 /* XXX deprecated, without effect */
+#define DCCP_SOCKOPT_SERVICE		2
+#define DCCP_SOCKOPT_CHANGE_L		3
+#define DCCP_SOCKOPT_CHANGE_R		4
+#define DCCP_SOCKOPT_GET_CUR_MPS	5
+#define DCCP_SOCKOPT_SERVER_TIMEWAIT	6
+#define DCCP_SOCKOPT_SEND_CSCOV		10
+#define DCCP_SOCKOPT_RECV_CSCOV		11
+#define DCCP_SOCKOPT_AVAILABLE_CCIDS	12
+#define DCCP_SOCKOPT_CCID		13
+#define DCCP_SOCKOPT_TX_CCID		14
+#define DCCP_SOCKOPT_RX_CCID		15
+#define DCCP_SOCKOPT_QPOLICY_ID		16
+#define DCCP_SOCKOPT_QPOLICY_TXQLEN	17
+#define DCCP_SOCKOPT_CCID_RX_INFO	128
+#define DCCP_SOCKOPT_CCID_TX_INFO	192
+
+/* maximum number of services provided on the same listening port */
+#define DCCP_SERVICE_LIST_MAX_LEN      32
+
+
+#endif /* _UAPI_LINUX_DCCP_H */
diff --git a/include/uapi/linux/dlm.h b/include/uapi/linux/dlm.h
new file mode 100644
index 00000000000..1f73cc06168
--- /dev/null
+++ b/include/uapi/linux/dlm.h
@@ -0,0 +1,75 @@
+/******************************************************************************
+*******************************************************************************
+**
+**  Copyright (C) Sistina Software, Inc.  1997-2003  All rights reserved.
+**  Copyright (C) 2004-2011 Red Hat, Inc.  All rights reserved.
+**
+**  This copyrighted material is made available to anyone wishing to use,
+**  modify, copy, or redistribute it subject to the terms and conditions
+**  of the GNU General Public License v.2.
+**
+*******************************************************************************
+******************************************************************************/
+
+#ifndef _UAPI__DLM_DOT_H__
+#define _UAPI__DLM_DOT_H__
+
+/*
+ * Interface to Distributed Lock Manager (DLM)
+ * routines and structures to use DLM lockspaces
+ */
+
+/* Lock levels and flags are here */
+#include <linux/dlmconstants.h>
+#include <linux/types.h>
+
+typedef void dlm_lockspace_t;
+
+/*
+ * Lock status block
+ *
+ * Use this structure to specify the contents of the lock value block.  For a
+ * conversion request, this structure is used to specify the lock ID of the
+ * lock.  DLM writes the status of the lock request and the lock ID assigned
+ * to the request in the lock status block.
+ *
+ * sb_lkid: the returned lock ID.  It is set on new (non-conversion) requests.
+ * It is available when dlm_lock returns.
+ *
+ * sb_lvbptr: saves or returns the contents of the lock's LVB according to rules
+ * shown for the DLM_LKF_VALBLK flag.
+ *
+ * sb_flags: DLM_SBF_DEMOTED is returned if in the process of promoting a lock,
+ * it was first demoted to NL to avoid conversion deadlock.
+ * DLM_SBF_VALNOTVALID is returned if the resource's LVB is marked invalid.
+ *
+ * sb_status: the returned status of the lock request set prior to AST
+ * execution.  Possible return values:
+ *
+ * 0 if lock request was successful
+ * -EAGAIN if request would block and is flagged DLM_LKF_NOQUEUE
+ * -DLM_EUNLOCK if unlock request was successful
+ * -DLM_ECANCEL if a cancel completed successfully
+ * -EDEADLK if a deadlock was detected
+ * -ETIMEDOUT if the lock request was canceled due to a timeout
+ */
+
+#define DLM_SBF_DEMOTED		0x01
+#define DLM_SBF_VALNOTVALID	0x02
+#define DLM_SBF_ALTMODE		0x04
+
+struct dlm_lksb {
+	int 	 sb_status;
+	__u32	 sb_lkid;
+	char 	 sb_flags;
+	char *	 sb_lvbptr;
+};
+
+/* dlm_new_lockspace() flags */
+
+#define DLM_LSFL_TIMEWARN	0x00000002
+#define DLM_LSFL_FS     	0x00000004
+#define DLM_LSFL_NEWEXCL     	0x00000008
+
+
+#endif /* _UAPI__DLM_DOT_H__ */
diff --git a/include/uapi/linux/dlm_device.h b/include/uapi/linux/dlm_device.h
new file mode 100644
index 00000000000..3060783c419
--- /dev/null
+++ b/include/uapi/linux/dlm_device.h
@@ -0,0 +1,108 @@
+/******************************************************************************
+*******************************************************************************
+**
+**  Copyright (C) Sistina Software, Inc.  1997-2003  All rights reserved.
+**  Copyright (C) 2004-2007 Red Hat, Inc.  All rights reserved.
+**
+**  This copyrighted material is made available to anyone wishing to use,
+**  modify, copy, or redistribute it subject to the terms and conditions
+**  of the GNU General Public License v.2.
+**
+*******************************************************************************
+******************************************************************************/
+
+#ifndef _LINUX_DLM_DEVICE_H
+#define _LINUX_DLM_DEVICE_H
+
+/* This is the device interface for dlm, most users will use a library
+ * interface.
+ */
+
+#include <linux/dlm.h>
+#include <linux/types.h>
+
+#define DLM_USER_LVB_LEN	32
+
+/* Version of the device interface */
+#define DLM_DEVICE_VERSION_MAJOR 6
+#define DLM_DEVICE_VERSION_MINOR 0
+#define DLM_DEVICE_VERSION_PATCH 1
+
+/* struct passed to the lock write */
+struct dlm_lock_params {
+	__u8 mode;
+	__u8 namelen;
+	__u16 unused;
+	__u32 flags;
+	__u32 lkid;
+	__u32 parent;
+	__u64 xid;
+	__u64 timeout;
+	void __user *castparam;
+	void __user *castaddr;
+	void __user *bastparam;
+	void __user *bastaddr;
+	struct dlm_lksb __user *lksb;
+	char lvb[DLM_USER_LVB_LEN];
+	char name[0];
+};
+
+struct dlm_lspace_params {
+	__u32 flags;
+	__u32 minor;
+	char name[0];
+};
+
+struct dlm_purge_params {
+	__u32 nodeid;
+	__u32 pid;
+};
+
+struct dlm_write_request {
+	__u32 version[3];
+	__u8 cmd;
+	__u8 is64bit;
+	__u8 unused[2];
+
+	union  {
+		struct dlm_lock_params   lock;
+		struct dlm_lspace_params lspace;
+		struct dlm_purge_params  purge;
+	} i;
+};
+
+struct dlm_device_version {
+	__u32 version[3];
+};
+
+/* struct read from the "device" fd,
+   consists mainly of userspace pointers for the library to use */
+
+struct dlm_lock_result {
+	__u32 version[3];
+	__u32 length;
+	void __user * user_astaddr;
+	void __user * user_astparam;
+	struct dlm_lksb __user * user_lksb;
+	struct dlm_lksb lksb;
+	__u8 bast_mode;
+	__u8 unused[3];
+	/* Offsets may be zero if no data is present */
+	__u32 lvb_offset;
+};
+
+/* Commands passed to the device */
+#define DLM_USER_LOCK         1
+#define DLM_USER_UNLOCK       2
+#define DLM_USER_QUERY        3
+#define DLM_USER_CREATE_LOCKSPACE  4
+#define DLM_USER_REMOVE_LOCKSPACE  5
+#define DLM_USER_PURGE        6
+#define DLM_USER_DEADLOCK     7
+
+/* Lockspace flags */
+#define DLM_USER_LSFLG_AUTOFREE   1
+#define DLM_USER_LSFLG_FORCEFREE  2
+
+#endif
+
diff --git a/include/uapi/linux/dlm_netlink.h b/include/uapi/linux/dlm_netlink.h
new file mode 100644
index 00000000000..647c8ef2722
--- /dev/null
+++ b/include/uapi/linux/dlm_netlink.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2007 Red Hat, Inc.  All rights reserved.
+ *
+ * This copyrighted material is made available to anyone wishing to use,
+ * modify, copy, or redistribute it subject to the terms and conditions
+ * of the GNU General Public License v.2.
+ */
+
+#ifndef _DLM_NETLINK_H
+#define _DLM_NETLINK_H
+
+#include <linux/types.h>
+
+enum {
+	DLM_STATUS_WAITING = 1,
+	DLM_STATUS_GRANTED = 2,
+	DLM_STATUS_CONVERT = 3,
+};
+
+#define DLM_LOCK_DATA_VERSION 1
+
+struct dlm_lock_data {
+	__u16 version;
+	__u32 lockspace_id;
+	int nodeid;
+	int ownpid;
+	__u32 id;
+	__u32 remid;
+	__u64 xid;
+	__s8 status;
+	__s8 grmode;
+	__s8 rqmode;
+	unsigned long timestamp;
+	int resource_namelen;
+	char resource_name[DLM_RESNAME_MAXLEN];
+};
+
+enum {
+	DLM_CMD_UNSPEC = 0,
+	DLM_CMD_HELLO,		/* user->kernel */
+	DLM_CMD_TIMEOUT,	/* kernel->user */
+	__DLM_CMD_MAX,
+};
+
+#define DLM_CMD_MAX (__DLM_CMD_MAX - 1)
+
+enum {
+	DLM_TYPE_UNSPEC = 0,
+	DLM_TYPE_LOCK,
+	__DLM_TYPE_MAX,
+};
+
+#define DLM_TYPE_MAX (__DLM_TYPE_MAX - 1)
+
+#define DLM_GENL_VERSION 0x1
+#define DLM_GENL_NAME "DLM"
+
+#endif /* _DLM_NETLINK_H */
diff --git a/include/uapi/linux/dlm_plock.h b/include/uapi/linux/dlm_plock.h
new file mode 100644
index 00000000000..6ae692c909c
--- /dev/null
+++ b/include/uapi/linux/dlm_plock.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2005-2008 Red Hat, Inc.  All rights reserved.
+ *
+ * This copyrighted material is made available to anyone wishing to use,
+ * modify, copy, or redistribute it subject to the terms and conditions
+ * of the GNU General Public License v.2.
+ */
+
+#ifndef _UAPI__DLM_PLOCK_DOT_H__
+#define _UAPI__DLM_PLOCK_DOT_H__
+
+#include <linux/types.h>
+
+#define DLM_PLOCK_MISC_NAME		"dlm_plock"
+
+#define DLM_PLOCK_VERSION_MAJOR	1
+#define DLM_PLOCK_VERSION_MINOR	2
+#define DLM_PLOCK_VERSION_PATCH	0
+
+enum {
+	DLM_PLOCK_OP_LOCK = 1,
+	DLM_PLOCK_OP_UNLOCK,
+	DLM_PLOCK_OP_GET,
+};
+
+#define DLM_PLOCK_FL_CLOSE 1
+
+struct dlm_plock_info {
+	__u32 version[3];
+	__u8 optype;
+	__u8 ex;
+	__u8 wait;
+	__u8 flags;
+	__u32 pid;
+	__s32 nodeid;
+	__s32 rv;
+	__u32 fsid;
+	__u64 number;
+	__u64 start;
+	__u64 end;
+	__u64 owner;
+};
+
+
+#endif /* _UAPI__DLM_PLOCK_DOT_H__ */
diff --git a/include/uapi/linux/dlmconstants.h b/include/uapi/linux/dlmconstants.h
new file mode 100644
index 00000000000..47bf08dc756
--- /dev/null
+++ b/include/uapi/linux/dlmconstants.h
@@ -0,0 +1,163 @@
+/******************************************************************************
+*******************************************************************************
+**
+**  Copyright (C) Sistina Software, Inc.  1997-2003  All rights reserved.
+**  Copyright (C) 2004-2007 Red Hat, Inc.  All rights reserved.
+**
+**  This copyrighted material is made available to anyone wishing to use,
+**  modify, copy, or redistribute it subject to the terms and conditions
+**  of the GNU General Public License v.2.
+**
+*******************************************************************************
+******************************************************************************/
+
+#ifndef __DLMCONSTANTS_DOT_H__
+#define __DLMCONSTANTS_DOT_H__
+
+/*
+ * Constants used by DLM interface.
+ */
+
+#define DLM_LOCKSPACE_LEN       64
+#define DLM_RESNAME_MAXLEN      64
+
+
+/*
+ * Lock Modes
+ */
+
+#define DLM_LOCK_IV		(-1)	/* invalid */
+#define DLM_LOCK_NL		0	/* null */
+#define DLM_LOCK_CR		1	/* concurrent read */
+#define DLM_LOCK_CW		2	/* concurrent write */
+#define DLM_LOCK_PR		3	/* protected read */
+#define DLM_LOCK_PW		4	/* protected write */
+#define DLM_LOCK_EX		5	/* exclusive */
+
+
+/*
+ * Flags to dlm_lock
+ *
+ * DLM_LKF_NOQUEUE
+ *
+ * Do not queue the lock request on the wait queue if it cannot be granted
+ * immediately.  If the lock cannot be granted because of this flag, DLM will
+ * either return -EAGAIN from the dlm_lock call or will return 0 from
+ * dlm_lock and -EAGAIN in the lock status block when the AST is executed.
+ *
+ * DLM_LKF_CANCEL
+ *
+ * Used to cancel a pending lock request or conversion.  A converting lock is
+ * returned to its previously granted mode.
+ *
+ * DLM_LKF_CONVERT
+ *
+ * Indicates a lock conversion request.  For conversions the name and namelen
+ * are ignored and the lock ID in the LKSB is used to identify the lock.
+ *
+ * DLM_LKF_VALBLK
+ *
+ * Requests DLM to return the current contents of the lock value block in the
+ * lock status block.  When this flag is set in a lock conversion from PW or EX
+ * modes, DLM assigns the value specified in the lock status block to the lock
+ * value block of the lock resource.  The LVB is a DLM_LVB_LEN size array
+ * containing application-specific information.
+ *
+ * DLM_LKF_QUECVT
+ *
+ * Force a conversion request to be queued, even if it is compatible with
+ * the granted modes of other locks on the same resource.
+ *
+ * DLM_LKF_IVVALBLK
+ *
+ * Invalidate the lock value block.
+ *
+ * DLM_LKF_CONVDEADLK
+ *
+ * Allows the dlm to resolve conversion deadlocks internally by demoting the
+ * granted mode of a converting lock to NL.  The DLM_SBF_DEMOTED flag is
+ * returned for a conversion that's been effected by this.
+ *
+ * DLM_LKF_PERSISTENT
+ *
+ * Only relevant to locks originating in userspace.  A persistent lock will not
+ * be removed if the process holding the lock exits.
+ *
+ * DLM_LKF_NODLCKWT
+ *
+ * Do not cancel the lock if it gets into conversion deadlock.
+ * Exclude this lock from being monitored due to DLM_LSFL_TIMEWARN.
+ *
+ * DLM_LKF_NODLCKBLK
+ *
+ * net yet implemented
+ *
+ * DLM_LKF_EXPEDITE
+ *
+ * Used only with new requests for NL mode locks.  Tells the lock manager
+ * to grant the lock, ignoring other locks in convert and wait queues.
+ *
+ * DLM_LKF_NOQUEUEBAST
+ *
+ * Send blocking AST's before returning -EAGAIN to the caller.  It is only
+ * used along with the NOQUEUE flag.  Blocking AST's are not sent for failed
+ * NOQUEUE requests otherwise.
+ *
+ * DLM_LKF_HEADQUE
+ *
+ * Add a lock to the head of the convert or wait queue rather than the tail.
+ *
+ * DLM_LKF_NOORDER
+ *
+ * Disregard the standard grant order rules and grant a lock as soon as it
+ * is compatible with other granted locks.
+ *
+ * DLM_LKF_ORPHAN
+ *
+ * not yet implemented
+ *
+ * DLM_LKF_ALTPR
+ *
+ * If the requested mode cannot be granted immediately, try to grant the lock
+ * in PR mode instead.  If this alternate mode is granted instead of the
+ * requested mode, DLM_SBF_ALTMODE is returned in the lksb.
+ *
+ * DLM_LKF_ALTCW
+ *
+ * The same as ALTPR, but the alternate mode is CW.
+ *
+ * DLM_LKF_FORCEUNLOCK
+ *
+ * Unlock the lock even if it is converting or waiting or has sublocks.
+ * Only really for use by the userland device.c code.
+ *
+ */
+
+#define DLM_LKF_NOQUEUE		0x00000001
+#define DLM_LKF_CANCEL		0x00000002
+#define DLM_LKF_CONVERT		0x00000004
+#define DLM_LKF_VALBLK		0x00000008
+#define DLM_LKF_QUECVT		0x00000010
+#define DLM_LKF_IVVALBLK	0x00000020
+#define DLM_LKF_CONVDEADLK	0x00000040
+#define DLM_LKF_PERSISTENT	0x00000080
+#define DLM_LKF_NODLCKWT	0x00000100
+#define DLM_LKF_NODLCKBLK	0x00000200
+#define DLM_LKF_EXPEDITE	0x00000400
+#define DLM_LKF_NOQUEUEBAST	0x00000800
+#define DLM_LKF_HEADQUE		0x00001000
+#define DLM_LKF_NOORDER		0x00002000
+#define DLM_LKF_ORPHAN		0x00004000
+#define DLM_LKF_ALTPR		0x00008000
+#define DLM_LKF_ALTCW		0x00010000
+#define DLM_LKF_FORCEUNLOCK	0x00020000
+#define DLM_LKF_TIMEOUT		0x00040000
+
+/*
+ * Some return codes that are not in errno.h
+ */
+
+#define DLM_ECANCEL		0x10001
+#define DLM_EUNLOCK		0x10002
+
+#endif  /* __DLMCONSTANTS_DOT_H__ */
diff --git a/include/uapi/linux/dm-ioctl.h b/include/uapi/linux/dm-ioctl.h
new file mode 100644
index 00000000000..91e3a360f61
--- /dev/null
+++ b/include/uapi/linux/dm-ioctl.h
@@ -0,0 +1,339 @@
+/*
+ * Copyright (C) 2001 - 2003 Sistina Software (UK) Limited.
+ * Copyright (C) 2004 - 2009 Red Hat, Inc. All rights reserved.
+ *
+ * This file is released under the LGPL.
+ */
+
+#ifndef _LINUX_DM_IOCTL_V4_H
+#define _LINUX_DM_IOCTL_V4_H
+
+#include <linux/types.h>
+
+#define DM_DIR "mapper"		/* Slashes not supported */
+#define DM_CONTROL_NODE "control"
+#define DM_MAX_TYPE_NAME 16
+#define DM_NAME_LEN 128
+#define DM_UUID_LEN 129
+
+/*
+ * A traditional ioctl interface for the device mapper.
+ *
+ * Each device can have two tables associated with it, an
+ * 'active' table which is the one currently used by io passing
+ * through the device, and an 'inactive' one which is a table
+ * that is being prepared as a replacement for the 'active' one.
+ *
+ * DM_VERSION:
+ * Just get the version information for the ioctl interface.
+ *
+ * DM_REMOVE_ALL:
+ * Remove all dm devices, destroy all tables.  Only really used
+ * for debug.
+ *
+ * DM_LIST_DEVICES:
+ * Get a list of all the dm device names.
+ *
+ * DM_DEV_CREATE:
+ * Create a new device, neither the 'active' or 'inactive' table
+ * slots will be filled.  The device will be in suspended state
+ * after creation, however any io to the device will get errored
+ * since it will be out-of-bounds.
+ *
+ * DM_DEV_REMOVE:
+ * Remove a device, destroy any tables.
+ *
+ * DM_DEV_RENAME:
+ * Rename a device or set its uuid if none was previously supplied.
+ *
+ * DM_SUSPEND:
+ * This performs both suspend and resume, depending which flag is
+ * passed in.
+ * Suspend: This command will not return until all pending io to
+ * the device has completed.  Further io will be deferred until
+ * the device is resumed.
+ * Resume: It is no longer an error to issue this command on an
+ * unsuspended device.  If a table is present in the 'inactive'
+ * slot, it will be moved to the active slot, then the old table
+ * from the active slot will be _destroyed_.  Finally the device
+ * is resumed.
+ *
+ * DM_DEV_STATUS:
+ * Retrieves the status for the table in the 'active' slot.
+ *
+ * DM_DEV_WAIT:
+ * Wait for a significant event to occur to the device.  This
+ * could either be caused by an event triggered by one of the
+ * targets of the table in the 'active' slot, or a table change.
+ *
+ * DM_TABLE_LOAD:
+ * Load a table into the 'inactive' slot for the device.  The
+ * device does _not_ need to be suspended prior to this command.
+ *
+ * DM_TABLE_CLEAR:
+ * Destroy any table in the 'inactive' slot (ie. abort).
+ *
+ * DM_TABLE_DEPS:
+ * Return a set of device dependencies for the 'active' table.
+ *
+ * DM_TABLE_STATUS:
+ * Return the targets status for the 'active' table.
+ *
+ * DM_TARGET_MSG:
+ * Pass a message string to the target at a specific offset of a device.
+ *
+ * DM_DEV_SET_GEOMETRY:
+ * Set the geometry of a device by passing in a string in this format:
+ *
+ * "cylinders heads sectors_per_track start_sector"
+ *
+ * Beware that CHS geometry is nearly obsolete and only provided
+ * for compatibility with dm devices that can be booted by a PC
+ * BIOS.  See struct hd_geometry for range limits.  Also note that
+ * the geometry is erased if the device size changes.
+ */
+
+/*
+ * All ioctl arguments consist of a single chunk of memory, with
+ * this structure at the start.  If a uuid is specified any
+ * lookup (eg. for a DM_INFO) will be done on that, *not* the
+ * name.
+ */
+struct dm_ioctl {
+	/*
+	 * The version number is made up of three parts:
+	 * major - no backward or forward compatibility,
+	 * minor - only backwards compatible,
+	 * patch - both backwards and forwards compatible.
+	 *
+	 * All clients of the ioctl interface should fill in the
+	 * version number of the interface that they were
+	 * compiled with.
+	 *
+	 * All recognised ioctl commands (ie. those that don't
+	 * return -ENOTTY) fill out this field, even if the
+	 * command failed.
+	 */
+	__u32 version[3];	/* in/out */
+	__u32 data_size;	/* total size of data passed in
+				 * including this struct */
+
+	__u32 data_start;	/* offset to start of data
+				 * relative to start of this struct */
+
+	__u32 target_count;	/* in/out */
+	__s32 open_count;	/* out */
+	__u32 flags;		/* in/out */
+
+	/*
+	 * event_nr holds either the event number (input and output) or the
+	 * udev cookie value (input only).
+	 * The DM_DEV_WAIT ioctl takes an event number as input.
+	 * The DM_SUSPEND, DM_DEV_REMOVE and DM_DEV_RENAME ioctls
+	 * use the field as a cookie to return in the DM_COOKIE
+	 * variable with the uevents they issue.
+	 * For output, the ioctls return the event number, not the cookie.
+	 */
+	__u32 event_nr;      	/* in/out */
+	__u32 padding;
+
+	__u64 dev;		/* in/out */
+
+	char name[DM_NAME_LEN];	/* device name */
+	char uuid[DM_UUID_LEN];	/* unique identifier for
+				 * the block device */
+	char data[7];		/* padding or data */
+};
+
+/*
+ * Used to specify tables.  These structures appear after the
+ * dm_ioctl.
+ */
+struct dm_target_spec {
+	__u64 sector_start;
+	__u64 length;
+	__s32 status;		/* used when reading from kernel only */
+
+	/*
+	 * Location of the next dm_target_spec.
+	 * - When specifying targets on a DM_TABLE_LOAD command, this value is
+	 *   the number of bytes from the start of the "current" dm_target_spec
+	 *   to the start of the "next" dm_target_spec.
+	 * - When retrieving targets on a DM_TABLE_STATUS command, this value
+	 *   is the number of bytes from the start of the first dm_target_spec
+	 *   (that follows the dm_ioctl struct) to the start of the "next"
+	 *   dm_target_spec.
+	 */
+	__u32 next;
+
+	char target_type[DM_MAX_TYPE_NAME];
+
+	/*
+	 * Parameter string starts immediately after this object.
+	 * Be careful to add padding after string to ensure correct
+	 * alignment of subsequent dm_target_spec.
+	 */
+};
+
+/*
+ * Used to retrieve the target dependencies.
+ */
+struct dm_target_deps {
+	__u32 count;	/* Array size */
+	__u32 padding;	/* unused */
+	__u64 dev[0];	/* out */
+};
+
+/*
+ * Used to get a list of all dm devices.
+ */
+struct dm_name_list {
+	__u64 dev;
+	__u32 next;		/* offset to the next record from
+				   the _start_ of this */
+	char name[0];
+};
+
+/*
+ * Used to retrieve the target versions
+ */
+struct dm_target_versions {
+        __u32 next;
+        __u32 version[3];
+
+        char name[0];
+};
+
+/*
+ * Used to pass message to a target
+ */
+struct dm_target_msg {
+	__u64 sector;	/* Device sector */
+
+	char message[0];
+};
+
+/*
+ * If you change this make sure you make the corresponding change
+ * to dm-ioctl.c:lookup_ioctl()
+ */
+enum {
+	/* Top level cmds */
+	DM_VERSION_CMD = 0,
+	DM_REMOVE_ALL_CMD,
+	DM_LIST_DEVICES_CMD,
+
+	/* device level cmds */
+	DM_DEV_CREATE_CMD,
+	DM_DEV_REMOVE_CMD,
+	DM_DEV_RENAME_CMD,
+	DM_DEV_SUSPEND_CMD,
+	DM_DEV_STATUS_CMD,
+	DM_DEV_WAIT_CMD,
+
+	/* Table level cmds */
+	DM_TABLE_LOAD_CMD,
+	DM_TABLE_CLEAR_CMD,
+	DM_TABLE_DEPS_CMD,
+	DM_TABLE_STATUS_CMD,
+
+	/* Added later */
+	DM_LIST_VERSIONS_CMD,
+	DM_TARGET_MSG_CMD,
+	DM_DEV_SET_GEOMETRY_CMD
+};
+
+#define DM_IOCTL 0xfd
+
+#define DM_VERSION       _IOWR(DM_IOCTL, DM_VERSION_CMD, struct dm_ioctl)
+#define DM_REMOVE_ALL    _IOWR(DM_IOCTL, DM_REMOVE_ALL_CMD, struct dm_ioctl)
+#define DM_LIST_DEVICES  _IOWR(DM_IOCTL, DM_LIST_DEVICES_CMD, struct dm_ioctl)
+
+#define DM_DEV_CREATE    _IOWR(DM_IOCTL, DM_DEV_CREATE_CMD, struct dm_ioctl)
+#define DM_DEV_REMOVE    _IOWR(DM_IOCTL, DM_DEV_REMOVE_CMD, struct dm_ioctl)
+#define DM_DEV_RENAME    _IOWR(DM_IOCTL, DM_DEV_RENAME_CMD, struct dm_ioctl)
+#define DM_DEV_SUSPEND   _IOWR(DM_IOCTL, DM_DEV_SUSPEND_CMD, struct dm_ioctl)
+#define DM_DEV_STATUS    _IOWR(DM_IOCTL, DM_DEV_STATUS_CMD, struct dm_ioctl)
+#define DM_DEV_WAIT      _IOWR(DM_IOCTL, DM_DEV_WAIT_CMD, struct dm_ioctl)
+
+#define DM_TABLE_LOAD    _IOWR(DM_IOCTL, DM_TABLE_LOAD_CMD, struct dm_ioctl)
+#define DM_TABLE_CLEAR   _IOWR(DM_IOCTL, DM_TABLE_CLEAR_CMD, struct dm_ioctl)
+#define DM_TABLE_DEPS    _IOWR(DM_IOCTL, DM_TABLE_DEPS_CMD, struct dm_ioctl)
+#define DM_TABLE_STATUS  _IOWR(DM_IOCTL, DM_TABLE_STATUS_CMD, struct dm_ioctl)
+
+#define DM_LIST_VERSIONS _IOWR(DM_IOCTL, DM_LIST_VERSIONS_CMD, struct dm_ioctl)
+
+#define DM_TARGET_MSG	 _IOWR(DM_IOCTL, DM_TARGET_MSG_CMD, struct dm_ioctl)
+#define DM_DEV_SET_GEOMETRY	_IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl)
+
+#define DM_VERSION_MAJOR	4
+#define DM_VERSION_MINOR	23
+#define DM_VERSION_PATCHLEVEL	0
+#define DM_VERSION_EXTRA	"-ioctl (2012-07-25)"
+
+/* Status bits */
+#define DM_READONLY_FLAG	(1 << 0) /* In/Out */
+#define DM_SUSPEND_FLAG		(1 << 1) /* In/Out */
+#define DM_PERSISTENT_DEV_FLAG	(1 << 3) /* In */
+
+/*
+ * Flag passed into ioctl STATUS command to get table information
+ * rather than current status.
+ */
+#define DM_STATUS_TABLE_FLAG	(1 << 4) /* In */
+
+/*
+ * Flags that indicate whether a table is present in either of
+ * the two table slots that a device has.
+ */
+#define DM_ACTIVE_PRESENT_FLAG   (1 << 5) /* Out */
+#define DM_INACTIVE_PRESENT_FLAG (1 << 6) /* Out */
+
+/*
+ * Indicates that the buffer passed in wasn't big enough for the
+ * results.
+ */
+#define DM_BUFFER_FULL_FLAG	(1 << 8) /* Out */
+
+/*
+ * This flag is now ignored.
+ */
+#define DM_SKIP_BDGET_FLAG	(1 << 9) /* In */
+
+/*
+ * Set this to avoid attempting to freeze any filesystem when suspending.
+ */
+#define DM_SKIP_LOCKFS_FLAG	(1 << 10) /* In */
+
+/*
+ * Set this to suspend without flushing queued ios.
+ * Also disables flushing uncommitted changes in the thin target before
+ * generating statistics for DM_TABLE_STATUS and DM_DEV_WAIT.
+ */
+#define DM_NOFLUSH_FLAG		(1 << 11) /* In */
+
+/*
+ * If set, any table information returned will relate to the inactive
+ * table instead of the live one.  Always check DM_INACTIVE_PRESENT_FLAG
+ * is set before using the data returned.
+ */
+#define DM_QUERY_INACTIVE_TABLE_FLAG	(1 << 12) /* In */
+
+/*
+ * If set, a uevent was generated for which the caller may need to wait.
+ */
+#define DM_UEVENT_GENERATED_FLAG	(1 << 13) /* Out */
+
+/*
+ * If set, rename changes the uuid not the name.  Only permitted
+ * if no uuid was previously supplied: an existing uuid cannot be changed.
+ */
+#define DM_UUID_FLAG			(1 << 14) /* In */
+
+/*
+ * If set, all buffers are wiped after use. Use when sending
+ * or requesting sensitive data such as an encryption key.
+ */
+#define DM_SECURE_DATA_FLAG		(1 << 15) /* In */
+
+#endif				/* _LINUX_DM_IOCTL_H */
diff --git a/include/uapi/linux/dm-log-userspace.h b/include/uapi/linux/dm-log-userspace.h
new file mode 100644
index 00000000000..0678c2adc42
--- /dev/null
+++ b/include/uapi/linux/dm-log-userspace.h
@@ -0,0 +1,416 @@
+/*
+ * Copyright (C) 2006-2009 Red Hat, Inc.
+ *
+ * This file is released under the LGPL.
+ */
+
+#ifndef __DM_LOG_USERSPACE_H__
+#define __DM_LOG_USERSPACE_H__
+
+#include <linux/dm-ioctl.h> /* For DM_UUID_LEN */
+
+/*
+ * The device-mapper userspace log module consists of a kernel component and
+ * a user-space component.  The kernel component implements the API defined
+ * in dm-dirty-log.h.  Its purpose is simply to pass the parameters and
+ * return values of those API functions between kernel and user-space.
+ *
+ * Below are defined the 'request_types' - DM_ULOG_CTR, DM_ULOG_DTR, etc.
+ * These request types represent the different functions in the device-mapper
+ * dirty log API.  Each of these is described in more detail below.
+ *
+ * The user-space program must listen for requests from the kernel (representing
+ * the various API functions) and process them.
+ *
+ * User-space begins by setting up the communication link (error checking
+ * removed for clarity):
+ *	fd = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR);
+ *	addr.nl_family = AF_NETLINK;
+ *	addr.nl_groups = CN_IDX_DM;
+ *	addr.nl_pid = 0;
+ *	r = bind(fd, (struct sockaddr *) &addr, sizeof(addr));
+ *	opt = addr.nl_groups;
+ *	setsockopt(fd, SOL_NETLINK, NETLINK_ADD_MEMBERSHIP, &opt, sizeof(opt));
+ *
+ * User-space will then wait to receive requests form the kernel, which it
+ * will process as described below.  The requests are received in the form,
+ * ((struct dm_ulog_request) + (additional data)).  Depending on the request
+ * type, there may or may not be 'additional data'.  In the descriptions below,
+ * you will see 'Payload-to-userspace' and 'Payload-to-kernel'.  The
+ * 'Payload-to-userspace' is what the kernel sends in 'additional data' as
+ * necessary parameters to complete the request.  The 'Payload-to-kernel' is
+ * the 'additional data' returned to the kernel that contains the necessary
+ * results of the request.  The 'data_size' field in the dm_ulog_request
+ * structure denotes the availability and amount of payload data.
+ */
+
+/*
+ * DM_ULOG_CTR corresponds to (found in dm-dirty-log.h):
+ * int (*ctr)(struct dm_dirty_log *log, struct dm_target *ti,
+ *	      unsigned argc, char **argv);
+ *
+ * Payload-to-userspace:
+ *	A single string containing all the argv arguments separated by ' 's
+ * Payload-to-kernel:
+ *	A NUL-terminated string that is the name of the device that is used
+ *	as the backing store for the log data.  'dm_get_device' will be called
+ *	on this device.  ('dm_put_device' will be called on this device
+ *	automatically after calling DM_ULOG_DTR.)  If there is no device needed
+ *	for log data, 'data_size' in the dm_ulog_request struct should be 0.
+ *
+ * The UUID contained in the dm_ulog_request structure is the reference that
+ * will be used by all request types to a specific log.  The constructor must
+ * record this association with the instance created.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field, filling the
+ * data field with the log device if necessary, and setting 'data_size'
+ * appropriately.
+ */
+#define DM_ULOG_CTR                    1
+
+/*
+ * DM_ULOG_DTR corresponds to (found in dm-dirty-log.h):
+ * void (*dtr)(struct dm_dirty_log *log);
+ *
+ * Payload-to-userspace:
+ *	A single string containing all the argv arguments separated by ' 's
+ * Payload-to-kernel:
+ *	None.  ('data_size' in the dm_ulog_request struct should be 0.)
+ *
+ * The UUID contained in the dm_ulog_request structure is all that is
+ * necessary to identify the log instance being destroyed.  There is no
+ * payload data.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and clearing
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_DTR                    2
+
+/*
+ * DM_ULOG_PRESUSPEND corresponds to (found in dm-dirty-log.h):
+ * int (*presuspend)(struct dm_dirty_log *log);
+ *
+ * Payload-to-userspace:
+ *	None.
+ * Payload-to-kernel:
+ *	None.
+ *
+ * The UUID contained in the dm_ulog_request structure is all that is
+ * necessary to identify the log instance being presuspended.  There is no
+ * payload data.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_PRESUSPEND             3
+
+/*
+ * DM_ULOG_POSTSUSPEND corresponds to (found in dm-dirty-log.h):
+ * int (*postsuspend)(struct dm_dirty_log *log);
+ *
+ * Payload-to-userspace:
+ *	None.
+ * Payload-to-kernel:
+ *	None.
+ *
+ * The UUID contained in the dm_ulog_request structure is all that is
+ * necessary to identify the log instance being postsuspended.  There is no
+ * payload data.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_POSTSUSPEND            4
+
+/*
+ * DM_ULOG_RESUME corresponds to (found in dm-dirty-log.h):
+ * int (*resume)(struct dm_dirty_log *log);
+ *
+ * Payload-to-userspace:
+ *	None.
+ * Payload-to-kernel:
+ *	None.
+ *
+ * The UUID contained in the dm_ulog_request structure is all that is
+ * necessary to identify the log instance being resumed.  There is no
+ * payload data.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_RESUME                 5
+
+/*
+ * DM_ULOG_GET_REGION_SIZE corresponds to (found in dm-dirty-log.h):
+ * uint32_t (*get_region_size)(struct dm_dirty_log *log);
+ *
+ * Payload-to-userspace:
+ *	None.
+ * Payload-to-kernel:
+ *	uint64_t - contains the region size
+ *
+ * The region size is something that was determined at constructor time.
+ * It is returned in the payload area and 'data_size' is set to
+ * reflect this.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field appropriately.
+ */
+#define DM_ULOG_GET_REGION_SIZE        6
+
+/*
+ * DM_ULOG_IS_CLEAN corresponds to (found in dm-dirty-log.h):
+ * int (*is_clean)(struct dm_dirty_log *log, region_t region);
+ *
+ * Payload-to-userspace:
+ *	uint64_t - the region to get clean status on
+ * Payload-to-kernel:
+ *	int64_t  - 1 if clean, 0 otherwise
+ *
+ * Payload is sizeof(uint64_t) and contains the region for which the clean
+ * status is being made.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - filling the payload with 0 (not clean) or
+ * 1 (clean), setting 'data_size' and 'error' appropriately.
+ */
+#define DM_ULOG_IS_CLEAN               7
+
+/*
+ * DM_ULOG_IN_SYNC corresponds to (found in dm-dirty-log.h):
+ * int (*in_sync)(struct dm_dirty_log *log, region_t region,
+ *		  int can_block);
+ *
+ * Payload-to-userspace:
+ *	uint64_t - the region to get sync status on
+ * Payload-to-kernel:
+ *	int64_t - 1 if in-sync, 0 otherwise
+ *
+ * Exactly the same as 'is_clean' above, except this time asking "has the
+ * region been recovered?" vs. "is the region not being modified?"
+ */
+#define DM_ULOG_IN_SYNC                8
+
+/*
+ * DM_ULOG_FLUSH corresponds to (found in dm-dirty-log.h):
+ * int (*flush)(struct dm_dirty_log *log);
+ *
+ * Payload-to-userspace:
+ *	None.
+ * Payload-to-kernel:
+ *	None.
+ *
+ * No incoming or outgoing payload.  Simply flush log state to disk.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and clearing
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_FLUSH                  9
+
+/*
+ * DM_ULOG_MARK_REGION corresponds to (found in dm-dirty-log.h):
+ * void (*mark_region)(struct dm_dirty_log *log, region_t region);
+ *
+ * Payload-to-userspace:
+ *	uint64_t [] - region(s) to mark
+ * Payload-to-kernel:
+ *	None.
+ *
+ * Incoming payload contains the one or more regions to mark dirty.
+ * The number of regions contained in the payload can be determined from
+ * 'data_size/sizeof(uint64_t)'.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and clearing
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_MARK_REGION           10
+
+/*
+ * DM_ULOG_CLEAR_REGION corresponds to (found in dm-dirty-log.h):
+ * void (*clear_region)(struct dm_dirty_log *log, region_t region);
+ *
+ * Payload-to-userspace:
+ *	uint64_t [] - region(s) to clear
+ * Payload-to-kernel:
+ *	None.
+ *
+ * Incoming payload contains the one or more regions to mark clean.
+ * The number of regions contained in the payload can be determined from
+ * 'data_size/sizeof(uint64_t)'.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and clearing
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_CLEAR_REGION          11
+
+/*
+ * DM_ULOG_GET_RESYNC_WORK corresponds to (found in dm-dirty-log.h):
+ * int (*get_resync_work)(struct dm_dirty_log *log, region_t *region);
+ *
+ * Payload-to-userspace:
+ *	None.
+ * Payload-to-kernel:
+ *	{
+ *		int64_t i; -- 1 if recovery necessary, 0 otherwise
+ *		uint64_t r; -- The region to recover if i=1
+ *	}
+ * 'data_size' should be set appropriately.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field appropriately.
+ */
+#define DM_ULOG_GET_RESYNC_WORK       12
+
+/*
+ * DM_ULOG_SET_REGION_SYNC corresponds to (found in dm-dirty-log.h):
+ * void (*set_region_sync)(struct dm_dirty_log *log,
+ *			   region_t region, int in_sync);
+ *
+ * Payload-to-userspace:
+ *	{
+ *		uint64_t - region to set sync state on
+ *		int64_t  - 0 if not-in-sync, 1 if in-sync
+ *	}
+ * Payload-to-kernel:
+ *	None.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and clearing
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_SET_REGION_SYNC       13
+
+/*
+ * DM_ULOG_GET_SYNC_COUNT corresponds to (found in dm-dirty-log.h):
+ * region_t (*get_sync_count)(struct dm_dirty_log *log);
+ *
+ * Payload-to-userspace:
+ *	None.
+ * Payload-to-kernel:
+ *	uint64_t - the number of in-sync regions
+ *
+ * No incoming payload.  Kernel-bound payload contains the number of
+ * regions that are in-sync (in a size_t).
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_GET_SYNC_COUNT        14
+
+/*
+ * DM_ULOG_STATUS_INFO corresponds to (found in dm-dirty-log.h):
+ * int (*status)(struct dm_dirty_log *log, STATUSTYPE_INFO,
+ *		 char *result, unsigned maxlen);
+ *
+ * Payload-to-userspace:
+ *	None.
+ * Payload-to-kernel:
+ *	Character string containing STATUSTYPE_INFO
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_STATUS_INFO           15
+
+/*
+ * DM_ULOG_STATUS_TABLE corresponds to (found in dm-dirty-log.h):
+ * int (*status)(struct dm_dirty_log *log, STATUSTYPE_TABLE,
+ *		 char *result, unsigned maxlen);
+ *
+ * Payload-to-userspace:
+ *	None.
+ * Payload-to-kernel:
+ *	Character string containing STATUSTYPE_TABLE
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_STATUS_TABLE          16
+
+/*
+ * DM_ULOG_IS_REMOTE_RECOVERING corresponds to (found in dm-dirty-log.h):
+ * int (*is_remote_recovering)(struct dm_dirty_log *log, region_t region);
+ *
+ * Payload-to-userspace:
+ *	uint64_t - region to determine recovery status on
+ * Payload-to-kernel:
+ *	{
+ *		int64_t is_recovering;  -- 0 if no, 1 if yes
+ *		uint64_t in_sync_hint;  -- lowest region still needing resync
+ *	}
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_IS_REMOTE_RECOVERING  17
+
+/*
+ * (DM_ULOG_REQUEST_MASK & request_type) to get the request type
+ *
+ * Payload-to-userspace:
+ *	A single string containing all the argv arguments separated by ' 's
+ * Payload-to-kernel:
+ *	None.  ('data_size' in the dm_ulog_request struct should be 0.)
+ *
+ * We are reserving 8 bits of the 32-bit 'request_type' field for the
+ * various request types above.  The remaining 24-bits are currently
+ * set to zero and are reserved for future use and compatibility concerns.
+ *
+ * User-space should always use DM_ULOG_REQUEST_TYPE to acquire the
+ * request type from the 'request_type' field to maintain forward compatibility.
+ */
+#define DM_ULOG_REQUEST_MASK 0xFF
+#define DM_ULOG_REQUEST_TYPE(request_type) \
+	(DM_ULOG_REQUEST_MASK & (request_type))
+
+/*
+ * DM_ULOG_REQUEST_VERSION is incremented when there is a
+ * change to the way information is passed between kernel
+ * and userspace.  This could be a structure change of
+ * dm_ulog_request or a change in the way requests are
+ * issued/handled.  Changes are outlined here:
+ *	version 1:  Initial implementation
+ *	version 2:  DM_ULOG_CTR allowed to return a string containing a
+ *	            device name that is to be registered with DM via
+ *	            'dm_get_device'.
+ */
+#define DM_ULOG_REQUEST_VERSION 2
+
+struct dm_ulog_request {
+	/*
+	 * The local unique identifier (luid) and the universally unique
+	 * identifier (uuid) are used to tie a request to a specific
+	 * mirror log.  A single machine log could probably make due with
+	 * just the 'luid', but a cluster-aware log must use the 'uuid' and
+	 * the 'luid'.  The uuid is what is required for node to node
+	 * communication concerning a particular log, but the 'luid' helps
+	 * differentiate between logs that are being swapped and have the
+	 * same 'uuid'.  (Think "live" and "inactive" device-mapper tables.)
+	 */
+	uint64_t luid;
+	char uuid[DM_UUID_LEN];
+	char padding[3];        /* Padding because DM_UUID_LEN = 129 */
+
+	uint32_t version;       /* See DM_ULOG_REQUEST_VERSION */
+	int32_t error;          /* Used to report back processing errors */
+
+	uint32_t seq;           /* Sequence number for request */
+	uint32_t request_type;  /* DM_ULOG_* defined above */
+	uint32_t data_size;     /* How much data (not including this struct) */
+
+	char data[0];
+};
+
+#endif /* __DM_LOG_USERSPACE_H__ */
diff --git a/include/uapi/linux/dn.h b/include/uapi/linux/dn.h
new file mode 100644
index 00000000000..9c50445462d
--- /dev/null
+++ b/include/uapi/linux/dn.h
@@ -0,0 +1,146 @@
+#ifndef _LINUX_DN_H
+#define _LINUX_DN_H
+
+#include <linux/types.h>
+
+/*
+
+	DECnet Data Structures and Constants
+
+*/
+
+/* 
+ * DNPROTO_NSP can't be the same as SOL_SOCKET, 
+ * so increment each by one (compared to ULTRIX)
+ */
+#define DNPROTO_NSP     2                       /* NSP protocol number       */
+#define DNPROTO_ROU     3                       /* Routing protocol number   */
+#define DNPROTO_NML     4                       /* Net mgt protocol number   */
+#define DNPROTO_EVL     5                       /* Evl protocol number (usr) */
+#define DNPROTO_EVR     6                       /* Evl protocol number (evl) */
+#define DNPROTO_NSPT    7                       /* NSP trace protocol number */
+
+
+#define DN_ADDL		2
+#define DN_MAXADDL	2 /* ULTRIX headers have 20 here, but pathworks has 2 */
+#define DN_MAXOPTL	16
+#define DN_MAXOBJL	16
+#define DN_MAXACCL	40
+#define DN_MAXALIASL	128
+#define DN_MAXNODEL	256
+#define DNBUFSIZE	65023
+
+/* 
+ * SET/GET Socket options  - must match the DSO_ numbers below
+ */
+#define SO_CONDATA      1
+#define SO_CONACCESS    2
+#define SO_PROXYUSR     3
+#define SO_LINKINFO     7
+
+#define DSO_CONDATA     1        /* Set/Get connect data                */
+#define DSO_DISDATA     10       /* Set/Get disconnect data             */
+#define DSO_CONACCESS   2        /* Set/Get connect access data         */
+#define DSO_ACCEPTMODE  4        /* Set/Get accept mode                 */
+#define DSO_CONACCEPT   5        /* Accept deferred connection          */
+#define DSO_CONREJECT   6        /* Reject deferred connection          */
+#define DSO_LINKINFO    7        /* Set/Get link information            */
+#define DSO_STREAM      8        /* Set socket type to stream           */
+#define DSO_SEQPACKET   9        /* Set socket type to sequenced packet */
+#define DSO_MAXWINDOW   11       /* Maximum window size allowed         */
+#define DSO_NODELAY	12       /* Turn off nagle                      */
+#define DSO_CORK        13       /* Wait for more data!                 */
+#define DSO_SERVICES	14       /* NSP Services field                  */
+#define DSO_INFO	15       /* NSP Info field                      */
+#define DSO_MAX         15       /* Maximum option number               */
+
+
+/* LINK States */
+#define LL_INACTIVE	0
+#define LL_CONNECTING	1
+#define LL_RUNNING	2
+#define LL_DISCONNECTING 3
+
+#define ACC_IMMED 0
+#define ACC_DEFER 1
+
+#define SDF_WILD        1                  /* Wild card object          */
+#define SDF_PROXY       2                  /* Addr eligible for proxy   */
+#define SDF_UICPROXY    4                  /* Use uic-based proxy       */
+
+/* Structures */
+
+
+struct dn_naddr {
+	__le16		a_len;
+	__u8 a_addr[DN_MAXADDL]; /* Two bytes little endian */
+};
+
+struct sockaddr_dn {
+	__u16		sdn_family;
+	__u8		sdn_flags;
+	__u8		sdn_objnum;
+	__le16		sdn_objnamel;
+	__u8		sdn_objname[DN_MAXOBJL];
+	struct   dn_naddr	sdn_add;
+};
+#define sdn_nodeaddrl   sdn_add.a_len   /* Node address length  */
+#define sdn_nodeaddr    sdn_add.a_addr  /* Node address         */
+
+
+
+/*
+ * DECnet set/get DSO_CONDATA, DSO_DISDATA (optional data) structure
+ */
+struct optdata_dn {
+        __le16  opt_status;     /* Extended status return */
+#define opt_sts opt_status
+        __le16  opt_optl;       /* Length of user data    */
+        __u8   opt_data[16];   /* User data              */
+};
+
+struct accessdata_dn {
+	__u8		acc_accl;
+	__u8		acc_acc[DN_MAXACCL];
+	__u8 		acc_passl;
+	__u8		acc_pass[DN_MAXACCL];
+	__u8 		acc_userl;
+	__u8		acc_user[DN_MAXACCL];
+};
+
+/*
+ * DECnet logical link information structure
+ */
+struct linkinfo_dn {
+        __u16  idn_segsize;    /* Segment size for link */
+        __u8   idn_linkstate;  /* Logical link state    */
+};
+
+/*
+ * Ethernet address format (for DECnet)
+ */
+union etheraddress {
+        __u8 dne_addr[6];             /* Full ethernet address */
+  struct {
+                __u8 dne_hiord[4];    /* DECnet HIORD prefix   */
+                __u8 dne_nodeaddr[2]; /* DECnet node address   */
+  } dne_remote;
+};
+
+
+/*
+ * DECnet physical socket address format
+ */
+struct dn_addr {
+        __le16 dna_family;      /* AF_DECnet               */
+        union etheraddress dna_netaddr; /* DECnet ethernet address */
+};
+
+#define DECNET_IOCTL_BASE 0x89 /* PROTOPRIVATE range */
+
+#define SIOCSNETADDR  _IOW(DECNET_IOCTL_BASE, 0xe0, struct dn_naddr)
+#define SIOCGNETADDR  _IOR(DECNET_IOCTL_BASE, 0xe1, struct dn_naddr)
+#define OSIOCSNETADDR _IOW(DECNET_IOCTL_BASE, 0xe0, int)
+#define OSIOCGNETADDR _IOR(DECNET_IOCTL_BASE, 0xe1, int)
+
+#endif /* _LINUX_DN_H */
diff --git a/include/uapi/linux/dqblk_xfs.h b/include/uapi/linux/dqblk_xfs.h
new file mode 100644
index 00000000000..86552807aed
--- /dev/null
+++ b/include/uapi/linux/dqblk_xfs.h
@@ -0,0 +1,166 @@
+/*
+ * Copyright (c) 1995-2001,2004 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesset General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#ifndef _LINUX_DQBLK_XFS_H
+#define _LINUX_DQBLK_XFS_H
+
+#include <linux/types.h>
+
+/*
+ * Disk quota - quotactl(2) commands for the XFS Quota Manager (XQM).
+ */
+
+#define XQM_CMD(x)	(('X'<<8)+(x))	/* note: forms first QCMD argument */
+#define XQM_COMMAND(x)	(((x) & (0xff<<8)) == ('X'<<8))	/* test if for XFS */
+
+#define XQM_USRQUOTA	0	/* system call user quota type */
+#define XQM_GRPQUOTA	1	/* system call group quota type */
+#define XQM_PRJQUOTA	2	/* system call project quota type */
+#define XQM_MAXQUOTAS	3
+
+#define Q_XQUOTAON	XQM_CMD(1)	/* enable accounting/enforcement */
+#define Q_XQUOTAOFF	XQM_CMD(2)	/* disable accounting/enforcement */
+#define Q_XGETQUOTA	XQM_CMD(3)	/* get disk limits and usage */
+#define Q_XSETQLIM	XQM_CMD(4)	/* set disk limits */
+#define Q_XGETQSTAT	XQM_CMD(5)	/* get quota subsystem status */
+#define Q_XQUOTARM	XQM_CMD(6)	/* free disk space used by dquots */
+#define Q_XQUOTASYNC	XQM_CMD(7)	/* delalloc flush, updates dquots */
+
+/*
+ * fs_disk_quota structure:
+ *
+ * This contains the current quota information regarding a user/proj/group.
+ * It is 64-bit aligned, and all the blk units are in BBs (Basic Blocks) of
+ * 512 bytes.
+ */
+#define FS_DQUOT_VERSION	1	/* fs_disk_quota.d_version */
+typedef struct fs_disk_quota {
+	__s8		d_version;	/* version of this structure */
+	__s8		d_flags;	/* FS_{USER,PROJ,GROUP}_QUOTA */
+	__u16		d_fieldmask;	/* field specifier */
+	__u32		d_id;		/* user, project, or group ID */
+	__u64		d_blk_hardlimit;/* absolute limit on disk blks */
+	__u64		d_blk_softlimit;/* preferred limit on disk blks */
+	__u64		d_ino_hardlimit;/* maximum # allocated inodes */
+	__u64		d_ino_softlimit;/* preferred inode limit */
+	__u64		d_bcount;	/* # disk blocks owned by the user */
+	__u64		d_icount;	/* # inodes owned by the user */
+	__s32		d_itimer;	/* zero if within inode limits */
+					/* if not, we refuse service */
+	__s32		d_btimer;	/* similar to above; for disk blocks */
+	__u16	  	d_iwarns;       /* # warnings issued wrt num inodes */
+	__u16	  	d_bwarns;       /* # warnings issued wrt disk blocks */
+	__s32		d_padding2;	/* padding2 - for future use */
+	__u64		d_rtb_hardlimit;/* absolute limit on realtime blks */
+	__u64		d_rtb_softlimit;/* preferred limit on RT disk blks */
+	__u64		d_rtbcount;	/* # realtime blocks owned */
+	__s32		d_rtbtimer;	/* similar to above; for RT disk blks */
+	__u16	  	d_rtbwarns;     /* # warnings issued wrt RT disk blks */
+	__s16		d_padding3;	/* padding3 - for future use */	
+	char		d_padding4[8];	/* yet more padding */
+} fs_disk_quota_t;
+
+/*
+ * These fields are sent to Q_XSETQLIM to specify fields that need to change.
+ */
+#define FS_DQ_ISOFT	(1<<0)
+#define FS_DQ_IHARD	(1<<1)
+#define FS_DQ_BSOFT	(1<<2)
+#define FS_DQ_BHARD 	(1<<3)
+#define FS_DQ_RTBSOFT	(1<<4)
+#define FS_DQ_RTBHARD	(1<<5)
+#define FS_DQ_LIMIT_MASK	(FS_DQ_ISOFT | FS_DQ_IHARD | FS_DQ_BSOFT | \
+				 FS_DQ_BHARD | FS_DQ_RTBSOFT | FS_DQ_RTBHARD)
+/*
+ * These timers can only be set in super user's dquot. For others, timers are
+ * automatically started and stopped. Superusers timer values set the limits
+ * for the rest.  In case these values are zero, the DQ_{F,B}TIMELIMIT values
+ * defined below are used. 
+ * These values also apply only to the d_fieldmask field for Q_XSETQLIM.
+ */
+#define FS_DQ_BTIMER	(1<<6)
+#define FS_DQ_ITIMER	(1<<7)
+#define FS_DQ_RTBTIMER 	(1<<8)
+#define FS_DQ_TIMER_MASK	(FS_DQ_BTIMER | FS_DQ_ITIMER | FS_DQ_RTBTIMER)
+
+/*
+ * Warning counts are set in both super user's dquot and others. For others,
+ * warnings are set/cleared by the administrators (or automatically by going
+ * below the soft limit).  Superusers warning values set the warning limits
+ * for the rest.  In case these values are zero, the DQ_{F,B}WARNLIMIT values
+ * defined below are used. 
+ * These values also apply only to the d_fieldmask field for Q_XSETQLIM.
+ */
+#define FS_DQ_BWARNS	(1<<9)
+#define FS_DQ_IWARNS	(1<<10)
+#define FS_DQ_RTBWARNS	(1<<11)
+#define FS_DQ_WARNS_MASK	(FS_DQ_BWARNS | FS_DQ_IWARNS | FS_DQ_RTBWARNS)
+
+/*
+ * Accounting values.  These can only be set for filesystem with
+ * non-transactional quotas that require quotacheck(8) in userspace.
+ */
+#define FS_DQ_BCOUNT		(1<<12)
+#define FS_DQ_ICOUNT		(1<<13)
+#define FS_DQ_RTBCOUNT		(1<<14)
+#define FS_DQ_ACCT_MASK		(FS_DQ_BCOUNT | FS_DQ_ICOUNT | FS_DQ_RTBCOUNT)
+
+/*
+ * Various flags related to quotactl(2).
+ */
+#define FS_QUOTA_UDQ_ACCT	(1<<0)  /* user quota accounting */
+#define FS_QUOTA_UDQ_ENFD	(1<<1)  /* user quota limits enforcement */
+#define FS_QUOTA_GDQ_ACCT	(1<<2)  /* group quota accounting */
+#define FS_QUOTA_GDQ_ENFD	(1<<3)  /* group quota limits enforcement */
+#define FS_QUOTA_PDQ_ACCT	(1<<4)  /* project quota accounting */
+#define FS_QUOTA_PDQ_ENFD	(1<<5)  /* project quota limits enforcement */
+
+#define FS_USER_QUOTA		(1<<0)	/* user quota type */
+#define FS_PROJ_QUOTA		(1<<1)	/* project quota type */
+#define FS_GROUP_QUOTA		(1<<2)	/* group quota type */
+
+/*
+ * fs_quota_stat is the struct returned in Q_XGETQSTAT for a given file system.
+ * Provides a centralized way to get meta information about the quota subsystem.
+ * eg. space taken up for user and group quotas, number of dquots currently
+ * incore.
+ */
+#define FS_QSTAT_VERSION	1	/* fs_quota_stat.qs_version */
+
+/*
+ * Some basic information about 'quota files'.
+ */
+typedef struct fs_qfilestat {
+	__u64		qfs_ino;	/* inode number */
+	__u64		qfs_nblks;	/* number of BBs 512-byte-blks */
+	__u32		qfs_nextents;	/* number of extents */
+} fs_qfilestat_t;
+
+typedef struct fs_quota_stat {
+	__s8		qs_version;	/* version number for future changes */
+	__u16		qs_flags;	/* FS_QUOTA_{U,P,G}DQ_{ACCT,ENFD} */
+	__s8		qs_pad;		/* unused */
+	fs_qfilestat_t	qs_uquota;	/* user quota storage information */
+	fs_qfilestat_t	qs_gquota;	/* group quota storage information */
+	__u32		qs_incoredqs;	/* number of dquots incore */
+	__s32		qs_btimelimit;  /* limit for blks timer */	
+	__s32		qs_itimelimit;  /* limit for inodes timer */	
+	__s32		qs_rtbtimelimit;/* limit for rt blks timer */	
+	__u16		qs_bwarnlimit;	/* limit for num warnings */
+	__u16		qs_iwarnlimit;	/* limit for num warnings */
+} fs_quota_stat_t;
+
+#endif	/* _LINUX_DQBLK_XFS_H */
diff --git a/include/uapi/linux/edd.h b/include/uapi/linux/edd.h
new file mode 100644
index 00000000000..89240a04e4c
--- /dev/null
+++ b/include/uapi/linux/edd.h
@@ -0,0 +1,191 @@
+/*
+ * linux/include/linux/edd.h
+ *  Copyright (C) 2002, 2003, 2004 Dell Inc.
+ *  by Matt Domsch <Matt_Domsch@dell.com>
+ *
+ * structures and definitions for the int 13h, ax={41,48}h
+ * BIOS Enhanced Disk Drive Services
+ * This is based on the T13 group document D1572 Revision 0 (August 14 2002)
+ * available at http://www.t13.org/docs2002/d1572r0.pdf.  It is
+ * very similar to D1484 Revision 3 http://www.t13.org/docs2002/d1484r3.pdf
+ *
+ * In a nutshell, arch/{i386,x86_64}/boot/setup.S populates a scratch
+ * table in the boot_params that contains a list of BIOS-enumerated
+ * boot devices.
+ * In arch/{i386,x86_64}/kernel/setup.c, this information is
+ * transferred into the edd structure, and in drivers/firmware/edd.c, that
+ * information is used to identify BIOS boot disk.  The code in setup.S
+ * is very sensitive to the size of these structures.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2.0 as published by
+ * the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#ifndef _UAPI_LINUX_EDD_H
+#define _UAPI_LINUX_EDD_H
+
+#include <linux/types.h>
+
+#define EDDNR 0x1e9		/* addr of number of edd_info structs at EDDBUF
+				   in boot_params - treat this as 1 byte  */
+#define EDDBUF	0xd00		/* addr of edd_info structs in boot_params */
+#define EDDMAXNR 6		/* number of edd_info structs starting at EDDBUF  */
+#define EDDEXTSIZE 8		/* change these if you muck with the structures */
+#define EDDPARMSIZE 74
+#define CHECKEXTENSIONSPRESENT 0x41
+#define GETDEVICEPARAMETERS 0x48
+#define LEGACYGETDEVICEPARAMETERS 0x08
+#define EDDMAGIC1 0x55AA
+#define EDDMAGIC2 0xAA55
+
+
+#define READ_SECTORS 0x02         /* int13 AH=0x02 is READ_SECTORS command */
+#define EDD_MBR_SIG_OFFSET 0x1B8  /* offset of signature in the MBR */
+#define EDD_MBR_SIG_BUF    0x290  /* addr in boot params */
+#define EDD_MBR_SIG_MAX 16        /* max number of signatures to store */
+#define EDD_MBR_SIG_NR_BUF 0x1ea  /* addr of number of MBR signtaures at EDD_MBR_SIG_BUF
+				     in boot_params - treat this as 1 byte  */
+
+#ifndef __ASSEMBLY__
+
+#define EDD_EXT_FIXED_DISK_ACCESS           (1 << 0)
+#define EDD_EXT_DEVICE_LOCKING_AND_EJECTING (1 << 1)
+#define EDD_EXT_ENHANCED_DISK_DRIVE_SUPPORT (1 << 2)
+#define EDD_EXT_64BIT_EXTENSIONS            (1 << 3)
+
+#define EDD_INFO_DMA_BOUNDARY_ERROR_TRANSPARENT (1 << 0)
+#define EDD_INFO_GEOMETRY_VALID                (1 << 1)
+#define EDD_INFO_REMOVABLE                     (1 << 2)
+#define EDD_INFO_WRITE_VERIFY                  (1 << 3)
+#define EDD_INFO_MEDIA_CHANGE_NOTIFICATION     (1 << 4)
+#define EDD_INFO_LOCKABLE                      (1 << 5)
+#define EDD_INFO_NO_MEDIA_PRESENT              (1 << 6)
+#define EDD_INFO_USE_INT13_FN50                (1 << 7)
+
+struct edd_device_params {
+	__u16 length;
+	__u16 info_flags;
+	__u32 num_default_cylinders;
+	__u32 num_default_heads;
+	__u32 sectors_per_track;
+	__u64 number_of_sectors;
+	__u16 bytes_per_sector;
+	__u32 dpte_ptr;		/* 0xFFFFFFFF for our purposes */
+	__u16 key;		/* = 0xBEDD */
+	__u8 device_path_info_length;	/* = 44 */
+	__u8 reserved2;
+	__u16 reserved3;
+	__u8 host_bus_type[4];
+	__u8 interface_type[8];
+	union {
+		struct {
+			__u16 base_address;
+			__u16 reserved1;
+			__u32 reserved2;
+		} __attribute__ ((packed)) isa;
+		struct {
+			__u8 bus;
+			__u8 slot;
+			__u8 function;
+			__u8 channel;
+			__u32 reserved;
+		} __attribute__ ((packed)) pci;
+		/* pcix is same as pci */
+		struct {
+			__u64 reserved;
+		} __attribute__ ((packed)) ibnd;
+		struct {
+			__u64 reserved;
+		} __attribute__ ((packed)) xprs;
+		struct {
+			__u64 reserved;
+		} __attribute__ ((packed)) htpt;
+		struct {
+			__u64 reserved;
+		} __attribute__ ((packed)) unknown;
+	} interface_path;
+	union {
+		struct {
+			__u8 device;
+			__u8 reserved1;
+			__u16 reserved2;
+			__u32 reserved3;
+			__u64 reserved4;
+		} __attribute__ ((packed)) ata;
+		struct {
+			__u8 device;
+			__u8 lun;
+			__u8 reserved1;
+			__u8 reserved2;
+			__u32 reserved3;
+			__u64 reserved4;
+		} __attribute__ ((packed)) atapi;
+		struct {
+			__u16 id;
+			__u64 lun;
+			__u16 reserved1;
+			__u32 reserved2;
+		} __attribute__ ((packed)) scsi;
+		struct {
+			__u64 serial_number;
+			__u64 reserved;
+		} __attribute__ ((packed)) usb;
+		struct {
+			__u64 eui;
+			__u64 reserved;
+		} __attribute__ ((packed)) i1394;
+		struct {
+			__u64 wwid;
+			__u64 lun;
+		} __attribute__ ((packed)) fibre;
+		struct {
+			__u64 identity_tag;
+			__u64 reserved;
+		} __attribute__ ((packed)) i2o;
+		struct {
+			__u32 array_number;
+			__u32 reserved1;
+			__u64 reserved2;
+		} __attribute__ ((packed)) raid;
+		struct {
+			__u8 device;
+			__u8 reserved1;
+			__u16 reserved2;
+			__u32 reserved3;
+			__u64 reserved4;
+		} __attribute__ ((packed)) sata;
+		struct {
+			__u64 reserved1;
+			__u64 reserved2;
+		} __attribute__ ((packed)) unknown;
+	} device_path;
+	__u8 reserved4;
+	__u8 checksum;
+} __attribute__ ((packed));
+
+struct edd_info {
+	__u8 device;
+	__u8 version;
+	__u16 interface_support;
+	__u16 legacy_max_cylinder;
+	__u8 legacy_max_head;
+	__u8 legacy_sectors_per_track;
+	struct edd_device_params params;
+} __attribute__ ((packed));
+
+struct edd {
+	unsigned int mbr_signature[EDD_MBR_SIG_MAX];
+	struct edd_info edd_info[EDDMAXNR];
+	unsigned char mbr_signature_nr;
+	unsigned char edd_info_nr;
+};
+
+#endif				/*!__ASSEMBLY__ */
+
+#endif /* _UAPI_LINUX_EDD_H */
diff --git a/include/uapi/linux/efs_fs_sb.h b/include/uapi/linux/efs_fs_sb.h
new file mode 100644
index 00000000000..a01be90c58c
--- /dev/null
+++ b/include/uapi/linux/efs_fs_sb.h
@@ -0,0 +1,62 @@
+/*
+ * efs_fs_sb.h
+ *
+ * Copyright (c) 1999 Al Smith
+ *
+ * Portions derived from IRIX header files (c) 1988 Silicon Graphics
+ */
+
+#ifndef __EFS_FS_SB_H__
+#define __EFS_FS_SB_H__
+
+#include <linux/types.h>
+#include <linux/magic.h>
+
+/* EFS superblock magic numbers */
+#define EFS_MAGIC	0x072959
+#define EFS_NEWMAGIC	0x07295a
+
+#define IS_EFS_MAGIC(x)	((x == EFS_MAGIC) || (x == EFS_NEWMAGIC))
+
+#define EFS_SUPER		1
+#define EFS_ROOTINODE		2
+
+/* efs superblock on disk */
+struct efs_super {
+	__be32		fs_size;        /* size of filesystem, in sectors */
+	__be32		fs_firstcg;     /* bb offset to first cg */
+	__be32		fs_cgfsize;     /* size of cylinder group in bb's */
+	__be16		fs_cgisize;     /* bb's of inodes per cylinder group */
+	__be16		fs_sectors;     /* sectors per track */
+	__be16		fs_heads;       /* heads per cylinder */
+	__be16		fs_ncg;         /* # of cylinder groups in filesystem */
+	__be16		fs_dirty;       /* fs needs to be fsck'd */
+	__be32		fs_time;        /* last super-block update */
+	__be32		fs_magic;       /* magic number */
+	char		fs_fname[6];    /* file system name */
+	char		fs_fpack[6];    /* file system pack name */
+	__be32		fs_bmsize;      /* size of bitmap in bytes */
+	__be32		fs_tfree;       /* total free data blocks */
+	__be32		fs_tinode;      /* total free inodes */
+	__be32		fs_bmblock;     /* bitmap location. */
+	__be32		fs_replsb;      /* Location of replicated superblock. */
+	__be32		fs_lastialloc;  /* last allocated inode */
+	char		fs_spare[20];   /* space for expansion - MUST BE ZERO */
+	__be32		fs_checksum;    /* checksum of volume portion of fs */
+};
+
+/* efs superblock information in memory */
+struct efs_sb_info {
+	__u32	fs_magic;	/* superblock magic number */
+	__u32	fs_start;	/* first block of filesystem */
+	__u32	first_block;	/* first data block in filesystem */
+	__u32	total_blocks;	/* total number of blocks in filesystem */
+	__u32	group_size;	/* # of blocks a group consists of */ 
+	__u32	data_free;	/* # of free data blocks */
+	__u32	inode_free;	/* # of free inodes */
+	__u16	inode_blocks;	/* # of blocks used for inodes in every grp */
+	__u16	total_groups;	/* # of groups */
+};
+
+#endif /* __EFS_FS_SB_H__ */
+
diff --git a/include/uapi/linux/elf-em.h b/include/uapi/linux/elf-em.h
new file mode 100644
index 00000000000..8e2b7bac437
--- /dev/null
+++ b/include/uapi/linux/elf-em.h
@@ -0,0 +1,56 @@
+#ifndef _LINUX_ELF_EM_H
+#define _LINUX_ELF_EM_H
+
+/* These constants define the various ELF target machines */
+#define EM_NONE		0
+#define EM_M32		1
+#define EM_SPARC	2
+#define EM_386		3
+#define EM_68K		4
+#define EM_88K		5
+#define EM_486		6	/* Perhaps disused */
+#define EM_860		7
+#define EM_MIPS		8	/* MIPS R3000 (officially, big-endian only) */
+				/* Next two are historical and binaries and
+				   modules of these types will be rejected by
+				   Linux.  */
+#define EM_MIPS_RS3_LE	10	/* MIPS R3000 little-endian */
+#define EM_MIPS_RS4_BE	10	/* MIPS R4000 big-endian */
+
+#define EM_PARISC	15	/* HPPA */
+#define EM_SPARC32PLUS	18	/* Sun's "v8plus" */
+#define EM_PPC		20	/* PowerPC */
+#define EM_PPC64	21	 /* PowerPC64 */
+#define EM_SPU		23	/* Cell BE SPU */
+#define EM_SH		42	/* SuperH */
+#define EM_SPARCV9	43	/* SPARC v9 64-bit */
+#define EM_IA_64	50	/* HP/Intel IA-64 */
+#define EM_X86_64	62	/* AMD x86-64 */
+#define EM_S390		22	/* IBM S/390 */
+#define EM_CRIS		76	/* Axis Communications 32-bit embedded processor */
+#define EM_V850		87	/* NEC v850 */
+#define EM_M32R		88	/* Renesas M32R */
+#define EM_H8_300	46	/* Renesas H8/300,300H,H8S */
+#define EM_MN10300	89	/* Panasonic/MEI MN10300, AM33 */
+#define EM_BLACKFIN     106     /* ADI Blackfin Processor */
+#define EM_TI_C6000	140	/* TI C6X DSPs */
+#define EM_FRV		0x5441	/* Fujitsu FR-V */
+#define EM_AVR32	0x18ad	/* Atmel AVR32 */
+
+/*
+ * This is an interim value that we will use until the committee comes
+ * up with a final number.
+ */
+#define EM_ALPHA	0x9026
+
+/* Bogus old v850 magic number, used by old tools. */
+#define EM_CYGNUS_V850	0x9080
+/* Bogus old m32r magic number, used by old tools. */
+#define EM_CYGNUS_M32R	0x9041
+/* This is the old interim value for S/390 architecture */
+#define EM_S390_OLD	0xA390
+/* Also Panasonic/MEI MN10300, AM33 */
+#define EM_CYGNUS_MN10300 0xbeef
+
+
+#endif /* _LINUX_ELF_EM_H */
diff --git a/include/uapi/linux/elf-fdpic.h b/include/uapi/linux/elf-fdpic.h
new file mode 100644
index 00000000000..1065078938f
--- /dev/null
+++ b/include/uapi/linux/elf-fdpic.h
@@ -0,0 +1,70 @@
+/* elf-fdpic.h: FDPIC ELF load map
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_ELF_FDPIC_H
+#define _LINUX_ELF_FDPIC_H
+
+#include <linux/elf.h>
+
+#define PT_GNU_STACK    (PT_LOOS + 0x474e551)
+
+/* segment mappings for ELF FDPIC libraries/executables/interpreters */
+struct elf32_fdpic_loadseg {
+	Elf32_Addr	addr;		/* core address to which mapped */
+	Elf32_Addr	p_vaddr;	/* VMA recorded in file */
+	Elf32_Word	p_memsz;	/* allocation size recorded in file */
+};
+
+struct elf32_fdpic_loadmap {
+	Elf32_Half	version;	/* version of these structures, just in case... */
+	Elf32_Half	nsegs;		/* number of segments */
+	struct elf32_fdpic_loadseg segs[];
+};
+
+#define ELF32_FDPIC_LOADMAP_VERSION	0x0000
+
+#ifndef __KERNEL__
+/*
+ * binfmt binary parameters structure
+ */
+struct elf_fdpic_params {
+	struct elfhdr			hdr;		/* ref copy of ELF header */
+	struct elf_phdr			*phdrs;		/* ref copy of PT_PHDR table */
+	struct elf32_fdpic_loadmap	*loadmap;	/* loadmap to be passed to userspace */
+	unsigned long			elfhdr_addr;	/* mapped ELF header user address */
+	unsigned long			ph_addr;	/* mapped PT_PHDR user address */
+	unsigned long			map_addr;	/* mapped loadmap user address */
+	unsigned long			entry_addr;	/* mapped entry user address */
+	unsigned long			stack_size;	/* stack size requested (PT_GNU_STACK) */
+	unsigned long			dynamic_addr;	/* mapped PT_DYNAMIC user address */
+	unsigned long			load_addr;	/* user address at which to map binary */
+	unsigned long			flags;
+#define ELF_FDPIC_FLAG_ARRANGEMENT	0x0000000f	/* PT_LOAD arrangement flags */
+#define ELF_FDPIC_FLAG_INDEPENDENT	0x00000000	/* PT_LOADs can be put anywhere */
+#define ELF_FDPIC_FLAG_HONOURVADDR	0x00000001	/* PT_LOAD.vaddr must be honoured */
+#define ELF_FDPIC_FLAG_CONSTDISP	0x00000002	/* PT_LOADs require constant
+							 * displacement */
+#define ELF_FDPIC_FLAG_CONTIGUOUS	0x00000003	/* PT_LOADs should be contiguous */
+#define ELF_FDPIC_FLAG_EXEC_STACK	0x00000010	/* T if stack to be executable */
+#define ELF_FDPIC_FLAG_NOEXEC_STACK	0x00000020	/* T if stack not to be executable */
+#define ELF_FDPIC_FLAG_EXECUTABLE	0x00000040	/* T if this object is the executable */
+#define ELF_FDPIC_FLAG_PRESENT		0x80000000	/* T if this object is present */
+};
+
+#ifdef CONFIG_MMU
+extern void elf_fdpic_arch_lay_out_mm(struct elf_fdpic_params *exec_params,
+				      struct elf_fdpic_params *interp_params,
+				      unsigned long *start_stack,
+				      unsigned long *start_brk);
+#endif
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_ELF_FDPIC_H */
diff --git a/include/uapi/linux/elf.h b/include/uapi/linux/elf.h
new file mode 100644
index 00000000000..126a8175e3e
--- /dev/null
+++ b/include/uapi/linux/elf.h
@@ -0,0 +1,414 @@
+#ifndef _UAPI_LINUX_ELF_H
+#define _UAPI_LINUX_ELF_H
+
+#include <linux/types.h>
+#include <linux/elf-em.h>
+
+/* 32-bit ELF base types. */
+typedef __u32	Elf32_Addr;
+typedef __u16	Elf32_Half;
+typedef __u32	Elf32_Off;
+typedef __s32	Elf32_Sword;
+typedef __u32	Elf32_Word;
+
+/* 64-bit ELF base types. */
+typedef __u64	Elf64_Addr;
+typedef __u16	Elf64_Half;
+typedef __s16	Elf64_SHalf;
+typedef __u64	Elf64_Off;
+typedef __s32	Elf64_Sword;
+typedef __u32	Elf64_Word;
+typedef __u64	Elf64_Xword;
+typedef __s64	Elf64_Sxword;
+
+/* These constants are for the segment types stored in the image headers */
+#define PT_NULL    0
+#define PT_LOAD    1
+#define PT_DYNAMIC 2
+#define PT_INTERP  3
+#define PT_NOTE    4
+#define PT_SHLIB   5
+#define PT_PHDR    6
+#define PT_TLS     7               /* Thread local storage segment */
+#define PT_LOOS    0x60000000      /* OS-specific */
+#define PT_HIOS    0x6fffffff      /* OS-specific */
+#define PT_LOPROC  0x70000000
+#define PT_HIPROC  0x7fffffff
+#define PT_GNU_EH_FRAME		0x6474e550
+
+#define PT_GNU_STACK	(PT_LOOS + 0x474e551)
+
+/*
+ * Extended Numbering
+ *
+ * If the real number of program header table entries is larger than
+ * or equal to PN_XNUM(0xffff), it is set to sh_info field of the
+ * section header at index 0, and PN_XNUM is set to e_phnum
+ * field. Otherwise, the section header at index 0 is zero
+ * initialized, if it exists.
+ *
+ * Specifications are available in:
+ *
+ * - Sun microsystems: Linker and Libraries.
+ *   Part No: 817-1984-17, September 2008.
+ *   URL: http://docs.sun.com/app/docs/doc/817-1984
+ *
+ * - System V ABI AMD64 Architecture Processor Supplement
+ *   Draft Version 0.99.,
+ *   May 11, 2009.
+ *   URL: http://www.x86-64.org/
+ */
+#define PN_XNUM 0xffff
+
+/* These constants define the different elf file types */
+#define ET_NONE   0
+#define ET_REL    1
+#define ET_EXEC   2
+#define ET_DYN    3
+#define ET_CORE   4
+#define ET_LOPROC 0xff00
+#define ET_HIPROC 0xffff
+
+/* This is the info that is needed to parse the dynamic section of the file */
+#define DT_NULL		0
+#define DT_NEEDED	1
+#define DT_PLTRELSZ	2
+#define DT_PLTGOT	3
+#define DT_HASH		4
+#define DT_STRTAB	5
+#define DT_SYMTAB	6
+#define DT_RELA		7
+#define DT_RELASZ	8
+#define DT_RELAENT	9
+#define DT_STRSZ	10
+#define DT_SYMENT	11
+#define DT_INIT		12
+#define DT_FINI		13
+#define DT_SONAME	14
+#define DT_RPATH 	15
+#define DT_SYMBOLIC	16
+#define DT_REL	        17
+#define DT_RELSZ	18
+#define DT_RELENT	19
+#define DT_PLTREL	20
+#define DT_DEBUG	21
+#define DT_TEXTREL	22
+#define DT_JMPREL	23
+#define DT_ENCODING	32
+#define OLD_DT_LOOS	0x60000000
+#define DT_LOOS		0x6000000d
+#define DT_HIOS		0x6ffff000
+#define DT_VALRNGLO	0x6ffffd00
+#define DT_VALRNGHI	0x6ffffdff
+#define DT_ADDRRNGLO	0x6ffffe00
+#define DT_ADDRRNGHI	0x6ffffeff
+#define DT_VERSYM	0x6ffffff0
+#define DT_RELACOUNT	0x6ffffff9
+#define DT_RELCOUNT	0x6ffffffa
+#define DT_FLAGS_1	0x6ffffffb
+#define DT_VERDEF	0x6ffffffc
+#define	DT_VERDEFNUM	0x6ffffffd
+#define DT_VERNEED	0x6ffffffe
+#define	DT_VERNEEDNUM	0x6fffffff
+#define OLD_DT_HIOS     0x6fffffff
+#define DT_LOPROC	0x70000000
+#define DT_HIPROC	0x7fffffff
+
+/* This info is needed when parsing the symbol table */
+#define STB_LOCAL  0
+#define STB_GLOBAL 1
+#define STB_WEAK   2
+
+#define STT_NOTYPE  0
+#define STT_OBJECT  1
+#define STT_FUNC    2
+#define STT_SECTION 3
+#define STT_FILE    4
+#define STT_COMMON  5
+#define STT_TLS     6
+
+#define ELF_ST_BIND(x)		((x) >> 4)
+#define ELF_ST_TYPE(x)		(((unsigned int) x) & 0xf)
+#define ELF32_ST_BIND(x)	ELF_ST_BIND(x)
+#define ELF32_ST_TYPE(x)	ELF_ST_TYPE(x)
+#define ELF64_ST_BIND(x)	ELF_ST_BIND(x)
+#define ELF64_ST_TYPE(x)	ELF_ST_TYPE(x)
+
+typedef struct dynamic{
+  Elf32_Sword d_tag;
+  union{
+    Elf32_Sword	d_val;
+    Elf32_Addr	d_ptr;
+  } d_un;
+} Elf32_Dyn;
+
+typedef struct {
+  Elf64_Sxword d_tag;		/* entry tag value */
+  union {
+    Elf64_Xword d_val;
+    Elf64_Addr d_ptr;
+  } d_un;
+} Elf64_Dyn;
+
+/* The following are used with relocations */
+#define ELF32_R_SYM(x) ((x) >> 8)
+#define ELF32_R_TYPE(x) ((x) & 0xff)
+
+#define ELF64_R_SYM(i)			((i) >> 32)
+#define ELF64_R_TYPE(i)			((i) & 0xffffffff)
+
+typedef struct elf32_rel {
+  Elf32_Addr	r_offset;
+  Elf32_Word	r_info;
+} Elf32_Rel;
+
+typedef struct elf64_rel {
+  Elf64_Addr r_offset;	/* Location at which to apply the action */
+  Elf64_Xword r_info;	/* index and type of relocation */
+} Elf64_Rel;
+
+typedef struct elf32_rela{
+  Elf32_Addr	r_offset;
+  Elf32_Word	r_info;
+  Elf32_Sword	r_addend;
+} Elf32_Rela;
+
+typedef struct elf64_rela {
+  Elf64_Addr r_offset;	/* Location at which to apply the action */
+  Elf64_Xword r_info;	/* index and type of relocation */
+  Elf64_Sxword r_addend;	/* Constant addend used to compute value */
+} Elf64_Rela;
+
+typedef struct elf32_sym{
+  Elf32_Word	st_name;
+  Elf32_Addr	st_value;
+  Elf32_Word	st_size;
+  unsigned char	st_info;
+  unsigned char	st_other;
+  Elf32_Half	st_shndx;
+} Elf32_Sym;
+
+typedef struct elf64_sym {
+  Elf64_Word st_name;		/* Symbol name, index in string tbl */
+  unsigned char	st_info;	/* Type and binding attributes */
+  unsigned char	st_other;	/* No defined meaning, 0 */
+  Elf64_Half st_shndx;		/* Associated section index */
+  Elf64_Addr st_value;		/* Value of the symbol */
+  Elf64_Xword st_size;		/* Associated symbol size */
+} Elf64_Sym;
+
+
+#define EI_NIDENT	16
+
+typedef struct elf32_hdr{
+  unsigned char	e_ident[EI_NIDENT];
+  Elf32_Half	e_type;
+  Elf32_Half	e_machine;
+  Elf32_Word	e_version;
+  Elf32_Addr	e_entry;  /* Entry point */
+  Elf32_Off	e_phoff;
+  Elf32_Off	e_shoff;
+  Elf32_Word	e_flags;
+  Elf32_Half	e_ehsize;
+  Elf32_Half	e_phentsize;
+  Elf32_Half	e_phnum;
+  Elf32_Half	e_shentsize;
+  Elf32_Half	e_shnum;
+  Elf32_Half	e_shstrndx;
+} Elf32_Ehdr;
+
+typedef struct elf64_hdr {
+  unsigned char	e_ident[EI_NIDENT];	/* ELF "magic number" */
+  Elf64_Half e_type;
+  Elf64_Half e_machine;
+  Elf64_Word e_version;
+  Elf64_Addr e_entry;		/* Entry point virtual address */
+  Elf64_Off e_phoff;		/* Program header table file offset */
+  Elf64_Off e_shoff;		/* Section header table file offset */
+  Elf64_Word e_flags;
+  Elf64_Half e_ehsize;
+  Elf64_Half e_phentsize;
+  Elf64_Half e_phnum;
+  Elf64_Half e_shentsize;
+  Elf64_Half e_shnum;
+  Elf64_Half e_shstrndx;
+} Elf64_Ehdr;
+
+/* These constants define the permissions on sections in the program
+   header, p_flags. */
+#define PF_R		0x4
+#define PF_W		0x2
+#define PF_X		0x1
+
+typedef struct elf32_phdr{
+  Elf32_Word	p_type;
+  Elf32_Off	p_offset;
+  Elf32_Addr	p_vaddr;
+  Elf32_Addr	p_paddr;
+  Elf32_Word	p_filesz;
+  Elf32_Word	p_memsz;
+  Elf32_Word	p_flags;
+  Elf32_Word	p_align;
+} Elf32_Phdr;
+
+typedef struct elf64_phdr {
+  Elf64_Word p_type;
+  Elf64_Word p_flags;
+  Elf64_Off p_offset;		/* Segment file offset */
+  Elf64_Addr p_vaddr;		/* Segment virtual address */
+  Elf64_Addr p_paddr;		/* Segment physical address */
+  Elf64_Xword p_filesz;		/* Segment size in file */
+  Elf64_Xword p_memsz;		/* Segment size in memory */
+  Elf64_Xword p_align;		/* Segment alignment, file & memory */
+} Elf64_Phdr;
+
+/* sh_type */
+#define SHT_NULL	0
+#define SHT_PROGBITS	1
+#define SHT_SYMTAB	2
+#define SHT_STRTAB	3
+#define SHT_RELA	4
+#define SHT_HASH	5
+#define SHT_DYNAMIC	6
+#define SHT_NOTE	7
+#define SHT_NOBITS	8
+#define SHT_REL		9
+#define SHT_SHLIB	10
+#define SHT_DYNSYM	11
+#define SHT_NUM		12
+#define SHT_LOPROC	0x70000000
+#define SHT_HIPROC	0x7fffffff
+#define SHT_LOUSER	0x80000000
+#define SHT_HIUSER	0xffffffff
+
+/* sh_flags */
+#define SHF_WRITE	0x1
+#define SHF_ALLOC	0x2
+#define SHF_EXECINSTR	0x4
+#define SHF_MASKPROC	0xf0000000
+
+/* special section indexes */
+#define SHN_UNDEF	0
+#define SHN_LORESERVE	0xff00
+#define SHN_LOPROC	0xff00
+#define SHN_HIPROC	0xff1f
+#define SHN_ABS		0xfff1
+#define SHN_COMMON	0xfff2
+#define SHN_HIRESERVE	0xffff
+ 
+typedef struct elf32_shdr {
+  Elf32_Word	sh_name;
+  Elf32_Word	sh_type;
+  Elf32_Word	sh_flags;
+  Elf32_Addr	sh_addr;
+  Elf32_Off	sh_offset;
+  Elf32_Word	sh_size;
+  Elf32_Word	sh_link;
+  Elf32_Word	sh_info;
+  Elf32_Word	sh_addralign;
+  Elf32_Word	sh_entsize;
+} Elf32_Shdr;
+
+typedef struct elf64_shdr {
+  Elf64_Word sh_name;		/* Section name, index in string tbl */
+  Elf64_Word sh_type;		/* Type of section */
+  Elf64_Xword sh_flags;		/* Miscellaneous section attributes */
+  Elf64_Addr sh_addr;		/* Section virtual addr at execution */
+  Elf64_Off sh_offset;		/* Section file offset */
+  Elf64_Xword sh_size;		/* Size of section in bytes */
+  Elf64_Word sh_link;		/* Index of another section */
+  Elf64_Word sh_info;		/* Additional section information */
+  Elf64_Xword sh_addralign;	/* Section alignment */
+  Elf64_Xword sh_entsize;	/* Entry size if section holds table */
+} Elf64_Shdr;
+
+#define	EI_MAG0		0		/* e_ident[] indexes */
+#define	EI_MAG1		1
+#define	EI_MAG2		2
+#define	EI_MAG3		3
+#define	EI_CLASS	4
+#define	EI_DATA		5
+#define	EI_VERSION	6
+#define	EI_OSABI	7
+#define	EI_PAD		8
+
+#define	ELFMAG0		0x7f		/* EI_MAG */
+#define	ELFMAG1		'E'
+#define	ELFMAG2		'L'
+#define	ELFMAG3		'F'
+#define	ELFMAG		"\177ELF"
+#define	SELFMAG		4
+
+#define	ELFCLASSNONE	0		/* EI_CLASS */
+#define	ELFCLASS32	1
+#define	ELFCLASS64	2
+#define	ELFCLASSNUM	3
+
+#define ELFDATANONE	0		/* e_ident[EI_DATA] */
+#define ELFDATA2LSB	1
+#define ELFDATA2MSB	2
+
+#define EV_NONE		0		/* e_version, EI_VERSION */
+#define EV_CURRENT	1
+#define EV_NUM		2
+
+#define ELFOSABI_NONE	0
+#define ELFOSABI_LINUX	3
+
+#ifndef ELF_OSABI
+#define ELF_OSABI ELFOSABI_NONE
+#endif
+
+/*
+ * Notes used in ET_CORE. Architectures export some of the arch register sets
+ * using the corresponding note types via the PTRACE_GETREGSET and
+ * PTRACE_SETREGSET requests.
+ */
+#define NT_PRSTATUS	1
+#define NT_PRFPREG	2
+#define NT_PRPSINFO	3
+#define NT_TASKSTRUCT	4
+#define NT_AUXV		6
+/*
+ * Note to userspace developers: size of NT_SIGINFO note may increase
+ * in the future to accomodate more fields, don't assume it is fixed!
+ */
+#define NT_SIGINFO      0x53494749
+#define NT_FILE         0x46494c45
+#define NT_PRXFPREG     0x46e62b7f      /* copied from gdb5.1/include/elf/common.h */
+#define NT_PPC_VMX	0x100		/* PowerPC Altivec/VMX registers */
+#define NT_PPC_SPE	0x101		/* PowerPC SPE/EVR registers */
+#define NT_PPC_VSX	0x102		/* PowerPC VSX registers */
+#define NT_386_TLS	0x200		/* i386 TLS slots (struct user_desc) */
+#define NT_386_IOPERM	0x201		/* x86 io permission bitmap (1=deny) */
+#define NT_X86_XSTATE	0x202		/* x86 extended state using xsave */
+#define NT_S390_HIGH_GPRS	0x300	/* s390 upper register halves */
+#define NT_S390_TIMER	0x301		/* s390 timer register */
+#define NT_S390_TODCMP	0x302		/* s390 TOD clock comparator register */
+#define NT_S390_TODPREG	0x303		/* s390 TOD programmable register */
+#define NT_S390_CTRS	0x304		/* s390 control registers */
+#define NT_S390_PREFIX	0x305		/* s390 prefix register */
+#define NT_S390_LAST_BREAK	0x306	/* s390 breaking event address */
+#define NT_S390_SYSTEM_CALL	0x307	/* s390 system call restart data */
+#define NT_S390_TDB	0x308		/* s390 transaction diagnostic block */
+#define NT_ARM_VFP	0x400		/* ARM VFP/NEON registers */
+#define NT_ARM_TLS	0x401		/* ARM TLS register */
+#define NT_ARM_HW_BREAK	0x402		/* ARM hardware breakpoint registers */
+#define NT_ARM_HW_WATCH	0x403		/* ARM hardware watchpoint registers */
+
+
+/* Note header in a PT_NOTE section */
+typedef struct elf32_note {
+  Elf32_Word	n_namesz;	/* Name size */
+  Elf32_Word	n_descsz;	/* Content size */
+  Elf32_Word	n_type;		/* Content type */
+} Elf32_Nhdr;
+
+/* Note header in a PT_NOTE section */
+typedef struct elf64_note {
+  Elf64_Word n_namesz;	/* Name size */
+  Elf64_Word n_descsz;	/* Content size */
+  Elf64_Word n_type;	/* Content type */
+} Elf64_Nhdr;
+
+#endif /* _UAPI_LINUX_ELF_H */
diff --git a/include/uapi/linux/elfcore.h b/include/uapi/linux/elfcore.h
new file mode 100644
index 00000000000..569737cfb55
--- /dev/null
+++ b/include/uapi/linux/elfcore.h
@@ -0,0 +1,100 @@
+#ifndef _UAPI_LINUX_ELFCORE_H
+#define _UAPI_LINUX_ELFCORE_H
+
+#include <linux/types.h>
+#include <linux/signal.h>
+#include <linux/time.h>
+#include <linux/ptrace.h>
+#include <linux/elf.h>
+#include <linux/fs.h>
+
+struct elf_siginfo
+{
+	int	si_signo;			/* signal number */
+	int	si_code;			/* extra code */
+	int	si_errno;			/* errno */
+};
+
+
+#ifndef __KERNEL__
+typedef elf_greg_t greg_t;
+typedef elf_gregset_t gregset_t;
+typedef elf_fpregset_t fpregset_t;
+typedef elf_fpxregset_t fpxregset_t;
+#define NGREG ELF_NGREG
+#endif
+
+/*
+ * Definitions to generate Intel SVR4-like core files.
+ * These mostly have the same names as the SVR4 types with "elf_"
+ * tacked on the front to prevent clashes with linux definitions,
+ * and the typedef forms have been avoided.  This is mostly like
+ * the SVR4 structure, but more Linuxy, with things that Linux does
+ * not support and which gdb doesn't really use excluded.
+ * Fields present but not used are marked with "XXX".
+ */
+struct elf_prstatus
+{
+#if 0
+	long	pr_flags;	/* XXX Process flags */
+	short	pr_why;		/* XXX Reason for process halt */
+	short	pr_what;	/* XXX More detailed reason */
+#endif
+	struct elf_siginfo pr_info;	/* Info associated with signal */
+	short	pr_cursig;		/* Current signal */
+	unsigned long pr_sigpend;	/* Set of pending signals */
+	unsigned long pr_sighold;	/* Set of held signals */
+#if 0
+	struct sigaltstack pr_altstack;	/* Alternate stack info */
+	struct sigaction pr_action;	/* Signal action for current sig */
+#endif
+	pid_t	pr_pid;
+	pid_t	pr_ppid;
+	pid_t	pr_pgrp;
+	pid_t	pr_sid;
+	struct timeval pr_utime;	/* User time */
+	struct timeval pr_stime;	/* System time */
+	struct timeval pr_cutime;	/* Cumulative user time */
+	struct timeval pr_cstime;	/* Cumulative system time */
+#if 0
+	long	pr_instr;		/* Current instruction */
+#endif
+	elf_gregset_t pr_reg;	/* GP registers */
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+	/* When using FDPIC, the loadmap addresses need to be communicated
+	 * to GDB in order for GDB to do the necessary relocations.  The
+	 * fields (below) used to communicate this information are placed
+	 * immediately after ``pr_reg'', so that the loadmap addresses may
+	 * be viewed as part of the register set if so desired.
+	 */
+	unsigned long pr_exec_fdpic_loadmap;
+	unsigned long pr_interp_fdpic_loadmap;
+#endif
+	int pr_fpvalid;		/* True if math co-processor being used.  */
+};
+
+#define ELF_PRARGSZ	(80)	/* Number of chars for args */
+
+struct elf_prpsinfo
+{
+	char	pr_state;	/* numeric process state */
+	char	pr_sname;	/* char for pr_state */
+	char	pr_zomb;	/* zombie */
+	char	pr_nice;	/* nice val */
+	unsigned long pr_flag;	/* flags */
+	__kernel_uid_t	pr_uid;
+	__kernel_gid_t	pr_gid;
+	pid_t	pr_pid, pr_ppid, pr_pgrp, pr_sid;
+	/* Lots missing */
+	char	pr_fname[16];	/* filename of executable */
+	char	pr_psargs[ELF_PRARGSZ];	/* initial part of arg list */
+};
+
+#ifndef __KERNEL__
+typedef struct elf_prstatus prstatus_t;
+typedef struct elf_prpsinfo prpsinfo_t;
+#define PRARGSZ ELF_PRARGSZ 
+#endif
+
+
+#endif /* _UAPI_LINUX_ELFCORE_H */
diff --git a/include/uapi/linux/errno.h b/include/uapi/linux/errno.h
new file mode 100644
index 00000000000..70f2bd34e33
--- /dev/null
+++ b/include/uapi/linux/errno.h
@@ -0,0 +1 @@
+#include <asm/errno.h>
diff --git a/include/uapi/linux/errqueue.h b/include/uapi/linux/errqueue.h
new file mode 100644
index 00000000000..aacd4fb7102
--- /dev/null
+++ b/include/uapi/linux/errqueue.h
@@ -0,0 +1,26 @@
+#ifndef _UAPI_LINUX_ERRQUEUE_H
+#define _UAPI_LINUX_ERRQUEUE_H
+
+#include <linux/types.h>
+
+struct sock_extended_err {
+	__u32	ee_errno;	
+	__u8	ee_origin;
+	__u8	ee_type;
+	__u8	ee_code;
+	__u8	ee_pad;
+	__u32   ee_info;
+	__u32   ee_data;
+};
+
+#define SO_EE_ORIGIN_NONE	0
+#define SO_EE_ORIGIN_LOCAL	1
+#define SO_EE_ORIGIN_ICMP	2
+#define SO_EE_ORIGIN_ICMP6	3
+#define SO_EE_ORIGIN_TXSTATUS	4
+#define SO_EE_ORIGIN_TIMESTAMPING SO_EE_ORIGIN_TXSTATUS
+
+#define SO_EE_OFFENDER(ee)	((struct sockaddr*)((ee)+1))
+
+
+#endif /* _UAPI_LINUX_ERRQUEUE_H */
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
new file mode 100644
index 00000000000..d3eaaaf1009
--- /dev/null
+++ b/include/uapi/linux/ethtool.h
@@ -0,0 +1,1085 @@
+/*
+ * ethtool.h: Defines for Linux ethtool.
+ *
+ * Copyright (C) 1998 David S. Miller (davem@redhat.com)
+ * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
+ * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
+ * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
+ *                                christopher.leech@intel.com,
+ *                                scott.feldman@intel.com)
+ * Portions Copyright (C) Sun Microsystems 2008
+ */
+
+#ifndef _UAPI_LINUX_ETHTOOL_H
+#define _UAPI_LINUX_ETHTOOL_H
+
+#include <linux/types.h>
+#include <linux/if_ether.h>
+
+/* This should work for both 32 and 64 bit userland. */
+struct ethtool_cmd {
+	__u32	cmd;
+	__u32	supported;	/* Features this interface supports */
+	__u32	advertising;	/* Features this interface advertises */
+	__u16	speed;	        /* The forced speed (lower bits) in
+				 * Mbps. Please use
+				 * ethtool_cmd_speed()/_set() to
+				 * access it */
+	__u8	duplex;		/* Duplex, half or full */
+	__u8	port;		/* Which connector port */
+	__u8	phy_address;	/* MDIO PHY address (PRTAD for clause 45).
+				 * May be read-only or read-write
+				 * depending on the driver.
+				 */
+	__u8	transceiver;	/* Which transceiver to use */
+	__u8	autoneg;	/* Enable or disable autonegotiation */
+	__u8	mdio_support;	/* MDIO protocols supported.  Read-only.
+				 * Not set by all drivers.
+				 */
+	__u32	maxtxpkt;	/* Tx pkts before generating tx int */
+	__u32	maxrxpkt;	/* Rx pkts before generating rx int */
+	__u16	speed_hi;       /* The forced speed (upper
+				 * bits) in Mbps. Please use
+				 * ethtool_cmd_speed()/_set() to
+				 * access it */
+	__u8	eth_tp_mdix;	/* twisted pair MDI-X status */
+	__u8    eth_tp_mdix_ctrl; /* twisted pair MDI-X control, when set,
+				   * link should be renegotiated if necessary
+				   */
+	__u32	lp_advertising;	/* Features the link partner advertises */
+	__u32	reserved[2];
+};
+
+static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
+					 __u32 speed)
+{
+
+	ep->speed = (__u16)speed;
+	ep->speed_hi = (__u16)(speed >> 16);
+}
+
+static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep)
+{
+	return (ep->speed_hi << 16) | ep->speed;
+}
+
+/* Device supports clause 22 register access to PHY or peripherals
+ * using the interface defined in <linux/mii.h>.  This should not be
+ * set if there are known to be no such peripherals present or if
+ * the driver only emulates clause 22 registers for compatibility.
+ */
+#define ETH_MDIO_SUPPORTS_C22	1
+
+/* Device supports clause 45 register access to PHY or peripherals
+ * using the interface defined in <linux/mii.h> and <linux/mdio.h>.
+ * This should not be set if there are known to be no such peripherals
+ * present.
+ */
+#define ETH_MDIO_SUPPORTS_C45	2
+
+#define ETHTOOL_FWVERS_LEN	32
+#define ETHTOOL_BUSINFO_LEN	32
+/* these strings are set to whatever the driver author decides... */
+struct ethtool_drvinfo {
+	__u32	cmd;
+	char	driver[32];	/* driver short name, "tulip", "eepro100" */
+	char	version[32];	/* driver version string */
+	char	fw_version[ETHTOOL_FWVERS_LEN];	/* firmware version string */
+	char	bus_info[ETHTOOL_BUSINFO_LEN];	/* Bus info for this IF. */
+				/* For PCI devices, use pci_name(pci_dev). */
+	char	reserved1[32];
+	char	reserved2[12];
+				/*
+				 * Some struct members below are filled in
+				 * using ops->get_sset_count().  Obtaining
+				 * this info from ethtool_drvinfo is now
+				 * deprecated; Use ETHTOOL_GSSET_INFO
+				 * instead.
+				 */
+	__u32	n_priv_flags;	/* number of flags valid in ETHTOOL_GPFLAGS */
+	__u32	n_stats;	/* number of u64's from ETHTOOL_GSTATS */
+	__u32	testinfo_len;
+	__u32	eedump_len;	/* Size of data from ETHTOOL_GEEPROM (bytes) */
+	__u32	regdump_len;	/* Size of data from ETHTOOL_GREGS (bytes) */
+};
+
+#define SOPASS_MAX	6
+/* wake-on-lan settings */
+struct ethtool_wolinfo {
+	__u32	cmd;
+	__u32	supported;
+	__u32	wolopts;
+	__u8	sopass[SOPASS_MAX]; /* SecureOn(tm) password */
+};
+
+/* for passing single values */
+struct ethtool_value {
+	__u32	cmd;
+	__u32	data;
+};
+
+/* for passing big chunks of data */
+struct ethtool_regs {
+	__u32	cmd;
+	__u32	version; /* driver-specific, indicates different chips/revs */
+	__u32	len; /* bytes */
+	__u8	data[0];
+};
+
+/* for passing EEPROM chunks */
+struct ethtool_eeprom {
+	__u32	cmd;
+	__u32	magic;
+	__u32	offset; /* in bytes */
+	__u32	len; /* in bytes */
+	__u8	data[0];
+};
+
+/**
+ * struct ethtool_eee - Energy Efficient Ethernet information
+ * @cmd: ETHTOOL_{G,S}EEE
+ * @supported: Mask of %SUPPORTED_* flags for the speed/duplex combinations
+ *	for which there is EEE support.
+ * @advertised: Mask of %ADVERTISED_* flags for the speed/duplex combinations
+ *	advertised as eee capable.
+ * @lp_advertised: Mask of %ADVERTISED_* flags for the speed/duplex
+ *	combinations advertised by the link partner as eee capable.
+ * @eee_active: Result of the eee auto negotiation.
+ * @eee_enabled: EEE configured mode (enabled/disabled).
+ * @tx_lpi_enabled: Whether the interface should assert its tx lpi, given
+ *	that eee was negotiated.
+ * @tx_lpi_timer: Time in microseconds the interface delays prior to asserting
+ *	its tx lpi (after reaching 'idle' state). Effective only when eee
+ *	was negotiated and tx_lpi_enabled was set.
+ */
+struct ethtool_eee {
+	__u32	cmd;
+	__u32	supported;
+	__u32	advertised;
+	__u32	lp_advertised;
+	__u32	eee_active;
+	__u32	eee_enabled;
+	__u32	tx_lpi_enabled;
+	__u32	tx_lpi_timer;
+	__u32	reserved[2];
+};
+
+/**
+ * struct ethtool_modinfo - plugin module eeprom information
+ * @cmd: %ETHTOOL_GMODULEINFO
+ * @type: Standard the module information conforms to %ETH_MODULE_SFF_xxxx
+ * @eeprom_len: Length of the eeprom
+ *
+ * This structure is used to return the information to
+ * properly size memory for a subsequent call to %ETHTOOL_GMODULEEEPROM.
+ * The type code indicates the eeprom data format
+ */
+struct ethtool_modinfo {
+	__u32   cmd;
+	__u32   type;
+	__u32   eeprom_len;
+	__u32   reserved[8];
+};
+
+/**
+ * struct ethtool_coalesce - coalescing parameters for IRQs and stats updates
+ * @cmd: ETHTOOL_{G,S}COALESCE
+ * @rx_coalesce_usecs: How many usecs to delay an RX interrupt after
+ *	a packet arrives.
+ * @rx_max_coalesced_frames: Maximum number of packets to receive
+ *	before an RX interrupt.
+ * @rx_coalesce_usecs_irq: Same as @rx_coalesce_usecs, except that
+ *	this value applies while an IRQ is being serviced by the host.
+ * @rx_max_coalesced_frames_irq: Same as @rx_max_coalesced_frames,
+ *	except that this value applies while an IRQ is being serviced
+ *	by the host.
+ * @tx_coalesce_usecs: How many usecs to delay a TX interrupt after
+ *	a packet is sent.
+ * @tx_max_coalesced_frames: Maximum number of packets to be sent
+ *	before a TX interrupt.
+ * @tx_coalesce_usecs_irq: Same as @tx_coalesce_usecs, except that
+ *	this value applies while an IRQ is being serviced by the host.
+ * @tx_max_coalesced_frames_irq: Same as @tx_max_coalesced_frames,
+ *	except that this value applies while an IRQ is being serviced
+ *	by the host.
+ * @stats_block_coalesce_usecs: How many usecs to delay in-memory
+ *	statistics block updates.  Some drivers do not have an
+ *	in-memory statistic block, and in such cases this value is
+ *	ignored.  This value must not be zero.
+ * @use_adaptive_rx_coalesce: Enable adaptive RX coalescing.
+ * @use_adaptive_tx_coalesce: Enable adaptive TX coalescing.
+ * @pkt_rate_low: Threshold for low packet rate (packets per second).
+ * @rx_coalesce_usecs_low: How many usecs to delay an RX interrupt after
+ *	a packet arrives, when the packet rate is below @pkt_rate_low.
+ * @rx_max_coalesced_frames_low: Maximum number of packets to be received
+ *	before an RX interrupt, when the packet rate is below @pkt_rate_low.
+ * @tx_coalesce_usecs_low: How many usecs to delay a TX interrupt after
+ *	a packet is sent, when the packet rate is below @pkt_rate_low.
+ * @tx_max_coalesced_frames_low: Maximum nuumber of packets to be sent before
+ *	a TX interrupt, when the packet rate is below @pkt_rate_low.
+ * @pkt_rate_high: Threshold for high packet rate (packets per second).
+ * @rx_coalesce_usecs_high: How many usecs to delay an RX interrupt after
+ *	a packet arrives, when the packet rate is above @pkt_rate_high.
+ * @rx_max_coalesced_frames_high: Maximum number of packets to be received
+ *	before an RX interrupt, when the packet rate is above @pkt_rate_high.
+ * @tx_coalesce_usecs_high: How many usecs to delay a TX interrupt after
+ *	a packet is sent, when the packet rate is above @pkt_rate_high.
+ * @tx_max_coalesced_frames_high: Maximum number of packets to be sent before
+ *	a TX interrupt, when the packet rate is above @pkt_rate_high.
+ * @rate_sample_interval: How often to do adaptive coalescing packet rate
+ *	sampling, measured in seconds.  Must not be zero.
+ *
+ * Each pair of (usecs, max_frames) fields specifies this exit
+ * condition for interrupt coalescing:
+ *	(usecs > 0 && time_since_first_completion >= usecs) ||
+ *	(max_frames > 0 && completed_frames >= max_frames)
+ * It is illegal to set both usecs and max_frames to zero as this
+ * would cause interrupts to never be generated.  To disable
+ * coalescing, set usecs = 0 and max_frames = 1.
+ *
+ * Some implementations ignore the value of max_frames and use the
+ * condition:
+ *	time_since_first_completion >= usecs
+ * This is deprecated.  Drivers for hardware that does not support
+ * counting completions should validate that max_frames == !rx_usecs.
+ *
+ * Adaptive RX/TX coalescing is an algorithm implemented by some
+ * drivers to improve latency under low packet rates and improve
+ * throughput under high packet rates.  Some drivers only implement
+ * one of RX or TX adaptive coalescing.  Anything not implemented by
+ * the driver causes these values to be silently ignored.
+ *
+ * When the packet rate is below @pkt_rate_high but above
+ * @pkt_rate_low (both measured in packets per second) the
+ * normal {rx,tx}_* coalescing parameters are used.
+ */
+struct ethtool_coalesce {
+	__u32	cmd;
+	__u32	rx_coalesce_usecs;
+	__u32	rx_max_coalesced_frames;
+	__u32	rx_coalesce_usecs_irq;
+	__u32	rx_max_coalesced_frames_irq;
+	__u32	tx_coalesce_usecs;
+	__u32	tx_max_coalesced_frames;
+	__u32	tx_coalesce_usecs_irq;
+	__u32	tx_max_coalesced_frames_irq;
+	__u32	stats_block_coalesce_usecs;
+	__u32	use_adaptive_rx_coalesce;
+	__u32	use_adaptive_tx_coalesce;
+	__u32	pkt_rate_low;
+	__u32	rx_coalesce_usecs_low;
+	__u32	rx_max_coalesced_frames_low;
+	__u32	tx_coalesce_usecs_low;
+	__u32	tx_max_coalesced_frames_low;
+	__u32	pkt_rate_high;
+	__u32	rx_coalesce_usecs_high;
+	__u32	rx_max_coalesced_frames_high;
+	__u32	tx_coalesce_usecs_high;
+	__u32	tx_max_coalesced_frames_high;
+	__u32	rate_sample_interval;
+};
+
+/* for configuring RX/TX ring parameters */
+struct ethtool_ringparam {
+	__u32	cmd;	/* ETHTOOL_{G,S}RINGPARAM */
+
+	/* Read only attributes.  These indicate the maximum number
+	 * of pending RX/TX ring entries the driver will allow the
+	 * user to set.
+	 */
+	__u32	rx_max_pending;
+	__u32	rx_mini_max_pending;
+	__u32	rx_jumbo_max_pending;
+	__u32	tx_max_pending;
+
+	/* Values changeable by the user.  The valid values are
+	 * in the range 1 to the "*_max_pending" counterpart above.
+	 */
+	__u32	rx_pending;
+	__u32	rx_mini_pending;
+	__u32	rx_jumbo_pending;
+	__u32	tx_pending;
+};
+
+/**
+ * struct ethtool_channels - configuring number of network channel
+ * @cmd: ETHTOOL_{G,S}CHANNELS
+ * @max_rx: Read only. Maximum number of receive channel the driver support.
+ * @max_tx: Read only. Maximum number of transmit channel the driver support.
+ * @max_other: Read only. Maximum number of other channel the driver support.
+ * @max_combined: Read only. Maximum number of combined channel the driver
+ *	support. Set of queues RX, TX or other.
+ * @rx_count: Valid values are in the range 1 to the max_rx.
+ * @tx_count: Valid values are in the range 1 to the max_tx.
+ * @other_count: Valid values are in the range 1 to the max_other.
+ * @combined_count: Valid values are in the range 1 to the max_combined.
+ *
+ * This can be used to configure RX, TX and other channels.
+ */
+
+struct ethtool_channels {
+	__u32	cmd;
+	__u32	max_rx;
+	__u32	max_tx;
+	__u32	max_other;
+	__u32	max_combined;
+	__u32	rx_count;
+	__u32	tx_count;
+	__u32	other_count;
+	__u32	combined_count;
+};
+
+/* for configuring link flow control parameters */
+struct ethtool_pauseparam {
+	__u32	cmd;	/* ETHTOOL_{G,S}PAUSEPARAM */
+
+	/* If the link is being auto-negotiated (via ethtool_cmd.autoneg
+	 * being true) the user may set 'autoneg' here non-zero to have the
+	 * pause parameters be auto-negotiated too.  In such a case, the
+	 * {rx,tx}_pause values below determine what capabilities are
+	 * advertised.
+	 *
+	 * If 'autoneg' is zero or the link is not being auto-negotiated,
+	 * then {rx,tx}_pause force the driver to use/not-use pause
+	 * flow control.
+	 */
+	__u32	autoneg;
+	__u32	rx_pause;
+	__u32	tx_pause;
+};
+
+#define ETH_GSTRING_LEN		32
+enum ethtool_stringset {
+	ETH_SS_TEST		= 0,
+	ETH_SS_STATS,
+	ETH_SS_PRIV_FLAGS,
+	ETH_SS_NTUPLE_FILTERS,	/* Do not use, GRXNTUPLE is now deprecated */
+	ETH_SS_FEATURES,
+};
+
+/* for passing string sets for data tagging */
+struct ethtool_gstrings {
+	__u32	cmd;		/* ETHTOOL_GSTRINGS */
+	__u32	string_set;	/* string set id e.c. ETH_SS_TEST, etc*/
+	__u32	len;		/* number of strings in the string set */
+	__u8	data[0];
+};
+
+struct ethtool_sset_info {
+	__u32	cmd;		/* ETHTOOL_GSSET_INFO */
+	__u32	reserved;
+	__u64	sset_mask;	/* input: each bit selects an sset to query */
+				/* output: each bit a returned sset */
+	__u32	data[0];	/* ETH_SS_xxx count, in order, based on bits
+				   in sset_mask.  One bit implies one
+				   __u32, two bits implies two
+				   __u32's, etc. */
+};
+
+/**
+ * enum ethtool_test_flags - flags definition of ethtool_test
+ * @ETH_TEST_FL_OFFLINE: if set perform online and offline tests, otherwise
+ *	only online tests.
+ * @ETH_TEST_FL_FAILED: Driver set this flag if test fails.
+ * @ETH_TEST_FL_EXTERNAL_LB: Application request to perform external loopback
+ *	test.
+ * @ETH_TEST_FL_EXTERNAL_LB_DONE: Driver performed the external loopback test
+ */
+
+enum ethtool_test_flags {
+	ETH_TEST_FL_OFFLINE	= (1 << 0),
+	ETH_TEST_FL_FAILED	= (1 << 1),
+	ETH_TEST_FL_EXTERNAL_LB	= (1 << 2),
+	ETH_TEST_FL_EXTERNAL_LB_DONE	= (1 << 3),
+};
+
+/* for requesting NIC test and getting results*/
+struct ethtool_test {
+	__u32	cmd;		/* ETHTOOL_TEST */
+	__u32	flags;		/* ETH_TEST_FL_xxx */
+	__u32	reserved;
+	__u32	len;		/* result length, in number of u64 elements */
+	__u64	data[0];
+};
+
+/* for dumping NIC-specific statistics */
+struct ethtool_stats {
+	__u32	cmd;		/* ETHTOOL_GSTATS */
+	__u32	n_stats;	/* number of u64's being returned */
+	__u64	data[0];
+};
+
+struct ethtool_perm_addr {
+	__u32	cmd;		/* ETHTOOL_GPERMADDR */
+	__u32	size;
+	__u8	data[0];
+};
+
+/* boolean flags controlling per-interface behavior characteristics.
+ * When reading, the flag indicates whether or not a certain behavior
+ * is enabled/present.  When writing, the flag indicates whether
+ * or not the driver should turn on (set) or off (clear) a behavior.
+ *
+ * Some behaviors may read-only (unconditionally absent or present).
+ * If such is the case, return EINVAL in the set-flags operation if the
+ * flag differs from the read-only value.
+ */
+enum ethtool_flags {
+	ETH_FLAG_TXVLAN		= (1 << 7),	/* TX VLAN offload enabled */
+	ETH_FLAG_RXVLAN		= (1 << 8),	/* RX VLAN offload enabled */
+	ETH_FLAG_LRO		= (1 << 15),	/* LRO is enabled */
+	ETH_FLAG_NTUPLE		= (1 << 27),	/* N-tuple filters enabled */
+	ETH_FLAG_RXHASH		= (1 << 28),
+};
+
+/* The following structures are for supporting RX network flow
+ * classification and RX n-tuple configuration. Note, all multibyte
+ * fields, e.g., ip4src, ip4dst, psrc, pdst, spi, etc. are expected to
+ * be in network byte order.
+ */
+
+/**
+ * struct ethtool_tcpip4_spec - flow specification for TCP/IPv4 etc.
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @psrc: Source port
+ * @pdst: Destination port
+ * @tos: Type-of-service
+ *
+ * This can be used to specify a TCP/IPv4, UDP/IPv4 or SCTP/IPv4 flow.
+ */
+struct ethtool_tcpip4_spec {
+	__be32	ip4src;
+	__be32	ip4dst;
+	__be16	psrc;
+	__be16	pdst;
+	__u8    tos;
+};
+
+/**
+ * struct ethtool_ah_espip4_spec - flow specification for IPsec/IPv4
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @spi: Security parameters index
+ * @tos: Type-of-service
+ *
+ * This can be used to specify an IPsec transport or tunnel over IPv4.
+ */
+struct ethtool_ah_espip4_spec {
+	__be32	ip4src;
+	__be32	ip4dst;
+	__be32	spi;
+	__u8    tos;
+};
+
+#define	ETH_RX_NFC_IP4	1
+
+/**
+ * struct ethtool_usrip4_spec - general flow specification for IPv4
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @l4_4_bytes: First 4 bytes of transport (layer 4) header
+ * @tos: Type-of-service
+ * @ip_ver: Value must be %ETH_RX_NFC_IP4; mask must be 0
+ * @proto: Transport protocol number; mask must be 0
+ */
+struct ethtool_usrip4_spec {
+	__be32	ip4src;
+	__be32	ip4dst;
+	__be32	l4_4_bytes;
+	__u8    tos;
+	__u8    ip_ver;
+	__u8    proto;
+};
+
+union ethtool_flow_union {
+	struct ethtool_tcpip4_spec		tcp_ip4_spec;
+	struct ethtool_tcpip4_spec		udp_ip4_spec;
+	struct ethtool_tcpip4_spec		sctp_ip4_spec;
+	struct ethtool_ah_espip4_spec		ah_ip4_spec;
+	struct ethtool_ah_espip4_spec		esp_ip4_spec;
+	struct ethtool_usrip4_spec		usr_ip4_spec;
+	struct ethhdr				ether_spec;
+	__u8					hdata[60];
+};
+
+struct ethtool_flow_ext {
+	__be16	vlan_etype;
+	__be16	vlan_tci;
+	__be32	data[2];
+};
+
+/**
+ * struct ethtool_rx_flow_spec - classification rule for RX flows
+ * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
+ * @h_u: Flow fields to match (dependent on @flow_type)
+ * @h_ext: Additional fields to match
+ * @m_u: Masks for flow field bits to be matched
+ * @m_ext: Masks for additional field bits to be matched
+ *	Note, all additional fields must be ignored unless @flow_type
+ *	includes the %FLOW_EXT flag.
+ * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC
+ *	if packets should be discarded
+ * @location: Location of rule in the table.  Locations must be
+ *	numbered such that a flow matching multiple rules will be
+ *	classified according to the first (lowest numbered) rule.
+ */
+struct ethtool_rx_flow_spec {
+	__u32		flow_type;
+	union ethtool_flow_union h_u;
+	struct ethtool_flow_ext h_ext;
+	union ethtool_flow_union m_u;
+	struct ethtool_flow_ext m_ext;
+	__u64		ring_cookie;
+	__u32		location;
+};
+
+/**
+ * struct ethtool_rxnfc - command to get or set RX flow classification rules
+ * @cmd: Specific command number - %ETHTOOL_GRXFH, %ETHTOOL_SRXFH,
+ *	%ETHTOOL_GRXRINGS, %ETHTOOL_GRXCLSRLCNT, %ETHTOOL_GRXCLSRULE,
+ *	%ETHTOOL_GRXCLSRLALL, %ETHTOOL_SRXCLSRLDEL or %ETHTOOL_SRXCLSRLINS
+ * @flow_type: Type of flow to be affected, e.g. %TCP_V4_FLOW
+ * @data: Command-dependent value
+ * @fs: Flow classification rule
+ * @rule_cnt: Number of rules to be affected
+ * @rule_locs: Array of used rule locations
+ *
+ * For %ETHTOOL_GRXFH and %ETHTOOL_SRXFH, @data is a bitmask indicating
+ * the fields included in the flow hash, e.g. %RXH_IP_SRC.  The following
+ * structure fields must not be used.
+ *
+ * For %ETHTOOL_GRXRINGS, @data is set to the number of RX rings/queues
+ * on return.
+ *
+ * For %ETHTOOL_GRXCLSRLCNT, @rule_cnt is set to the number of defined
+ * rules on return.  If @data is non-zero on return then it is the
+ * size of the rule table, plus the flag %RX_CLS_LOC_SPECIAL if the
+ * driver supports any special location values.  If that flag is not
+ * set in @data then special location values should not be used.
+ *
+ * For %ETHTOOL_GRXCLSRULE, @fs.@location specifies the location of an
+ * existing rule on entry and @fs contains the rule on return.
+ *
+ * For %ETHTOOL_GRXCLSRLALL, @rule_cnt specifies the array size of the
+ * user buffer for @rule_locs on entry.  On return, @data is the size
+ * of the rule table, @rule_cnt is the number of defined rules, and
+ * @rule_locs contains the locations of the defined rules.  Drivers
+ * must use the second parameter to get_rxnfc() instead of @rule_locs.
+ *
+ * For %ETHTOOL_SRXCLSRLINS, @fs specifies the rule to add or update.
+ * @fs.@location either specifies the location to use or is a special
+ * location value with %RX_CLS_LOC_SPECIAL flag set.  On return,
+ * @fs.@location is the actual rule location.
+ *
+ * For %ETHTOOL_SRXCLSRLDEL, @fs.@location specifies the location of an
+ * existing rule on entry.
+ *
+ * A driver supporting the special location values for
+ * %ETHTOOL_SRXCLSRLINS may add the rule at any suitable unused
+ * location, and may remove a rule at a later location (lower
+ * priority) that matches exactly the same set of flows.  The special
+ * values are: %RX_CLS_LOC_ANY, selecting any location;
+ * %RX_CLS_LOC_FIRST, selecting the first suitable location (maximum
+ * priority); and %RX_CLS_LOC_LAST, selecting the last suitable
+ * location (minimum priority).  Additional special values may be
+ * defined in future and drivers must return -%EINVAL for any
+ * unrecognised value.
+ */
+struct ethtool_rxnfc {
+	__u32				cmd;
+	__u32				flow_type;
+	__u64				data;
+	struct ethtool_rx_flow_spec	fs;
+	__u32				rule_cnt;
+	__u32				rule_locs[0];
+};
+
+
+/**
+ * struct ethtool_rxfh_indir - command to get or set RX flow hash indirection
+ * @cmd: Specific command number - %ETHTOOL_GRXFHINDIR or %ETHTOOL_SRXFHINDIR
+ * @size: On entry, the array size of the user buffer, which may be zero.
+ *	On return from %ETHTOOL_GRXFHINDIR, the array size of the hardware
+ *	indirection table.
+ * @ring_index: RX ring/queue index for each hash value
+ *
+ * For %ETHTOOL_GRXFHINDIR, a @size of zero means that only the size
+ * should be returned.  For %ETHTOOL_SRXFHINDIR, a @size of zero means
+ * the table should be reset to default values.  This last feature
+ * is not supported by the original implementations.
+ */
+struct ethtool_rxfh_indir {
+	__u32	cmd;
+	__u32	size;
+	__u32	ring_index[0];
+};
+
+/**
+ * struct ethtool_rx_ntuple_flow_spec - specification for RX flow filter
+ * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
+ * @h_u: Flow field values to match (dependent on @flow_type)
+ * @m_u: Masks for flow field value bits to be ignored
+ * @vlan_tag: VLAN tag to match
+ * @vlan_tag_mask: Mask for VLAN tag bits to be ignored
+ * @data: Driver-dependent data to match
+ * @data_mask: Mask for driver-dependent data bits to be ignored
+ * @action: RX ring/queue index to deliver to (non-negative) or other action
+ *	(negative, e.g. %ETHTOOL_RXNTUPLE_ACTION_DROP)
+ *
+ * For flow types %TCP_V4_FLOW, %UDP_V4_FLOW and %SCTP_V4_FLOW, where
+ * a field value and mask are both zero this is treated as if all mask
+ * bits are set i.e. the field is ignored.
+ */
+struct ethtool_rx_ntuple_flow_spec {
+	__u32		 flow_type;
+	union {
+		struct ethtool_tcpip4_spec		tcp_ip4_spec;
+		struct ethtool_tcpip4_spec		udp_ip4_spec;
+		struct ethtool_tcpip4_spec		sctp_ip4_spec;
+		struct ethtool_ah_espip4_spec		ah_ip4_spec;
+		struct ethtool_ah_espip4_spec		esp_ip4_spec;
+		struct ethtool_usrip4_spec		usr_ip4_spec;
+		struct ethhdr				ether_spec;
+		__u8					hdata[72];
+	} h_u, m_u;
+
+	__u16	        vlan_tag;
+	__u16	        vlan_tag_mask;
+	__u64		data;
+	__u64		data_mask;
+
+	__s32		action;
+#define ETHTOOL_RXNTUPLE_ACTION_DROP	(-1)	/* drop packet */
+#define ETHTOOL_RXNTUPLE_ACTION_CLEAR	(-2)	/* clear filter */
+};
+
+/**
+ * struct ethtool_rx_ntuple - command to set or clear RX flow filter
+ * @cmd: Command number - %ETHTOOL_SRXNTUPLE
+ * @fs: Flow filter specification
+ */
+struct ethtool_rx_ntuple {
+	__u32					cmd;
+	struct ethtool_rx_ntuple_flow_spec	fs;
+};
+
+#define ETHTOOL_FLASH_MAX_FILENAME	128
+enum ethtool_flash_op_type {
+	ETHTOOL_FLASH_ALL_REGIONS	= 0,
+};
+
+/* for passing firmware flashing related parameters */
+struct ethtool_flash {
+	__u32	cmd;
+	__u32	region;
+	char	data[ETHTOOL_FLASH_MAX_FILENAME];
+};
+
+/**
+ * struct ethtool_dump - used for retrieving, setting device dump
+ * @cmd: Command number - %ETHTOOL_GET_DUMP_FLAG, %ETHTOOL_GET_DUMP_DATA, or
+ * 	%ETHTOOL_SET_DUMP
+ * @version: FW version of the dump, filled in by driver
+ * @flag: driver dependent flag for dump setting, filled in by driver during
+ *        get and filled in by ethtool for set operation.
+ *        flag must be initialized by macro ETH_FW_DUMP_DISABLE value when
+ *        firmware dump is disabled.
+ * @len: length of dump data, used as the length of the user buffer on entry to
+ * 	 %ETHTOOL_GET_DUMP_DATA and this is returned as dump length by driver
+ * 	 for %ETHTOOL_GET_DUMP_FLAG command
+ * @data: data collected for get dump data operation
+ */
+
+#define ETH_FW_DUMP_DISABLE 0
+
+struct ethtool_dump {
+	__u32	cmd;
+	__u32	version;
+	__u32	flag;
+	__u32	len;
+	__u8	data[0];
+};
+
+/* for returning and changing feature sets */
+
+/**
+ * struct ethtool_get_features_block - block with state of 32 features
+ * @available: mask of changeable features
+ * @requested: mask of features requested to be enabled if possible
+ * @active: mask of currently enabled features
+ * @never_changed: mask of features not changeable for any device
+ */
+struct ethtool_get_features_block {
+	__u32	available;
+	__u32	requested;
+	__u32	active;
+	__u32	never_changed;
+};
+
+/**
+ * struct ethtool_gfeatures - command to get state of device's features
+ * @cmd: command number = %ETHTOOL_GFEATURES
+ * @size: in: number of elements in the features[] array;
+ *       out: number of elements in features[] needed to hold all features
+ * @features: state of features
+ */
+struct ethtool_gfeatures {
+	__u32	cmd;
+	__u32	size;
+	struct ethtool_get_features_block features[0];
+};
+
+/**
+ * struct ethtool_set_features_block - block with request for 32 features
+ * @valid: mask of features to be changed
+ * @requested: values of features to be changed
+ */
+struct ethtool_set_features_block {
+	__u32	valid;
+	__u32	requested;
+};
+
+/**
+ * struct ethtool_sfeatures - command to request change in device's features
+ * @cmd: command number = %ETHTOOL_SFEATURES
+ * @size: array size of the features[] array
+ * @features: feature change masks
+ */
+struct ethtool_sfeatures {
+	__u32	cmd;
+	__u32	size;
+	struct ethtool_set_features_block features[0];
+};
+
+/**
+ * struct ethtool_ts_info - holds a device's timestamping and PHC association
+ * @cmd: command number = %ETHTOOL_GET_TS_INFO
+ * @so_timestamping: bit mask of the sum of the supported SO_TIMESTAMPING flags
+ * @phc_index: device index of the associated PHC, or -1 if there is none
+ * @tx_types: bit mask of the supported hwtstamp_tx_types enumeration values
+ * @rx_filters: bit mask of the supported hwtstamp_rx_filters enumeration values
+ *
+ * The bits in the 'tx_types' and 'rx_filters' fields correspond to
+ * the 'hwtstamp_tx_types' and 'hwtstamp_rx_filters' enumeration values,
+ * respectively.  For example, if the device supports HWTSTAMP_TX_ON,
+ * then (1 << HWTSTAMP_TX_ON) in 'tx_types' will be set.
+ */
+struct ethtool_ts_info {
+	__u32	cmd;
+	__u32	so_timestamping;
+	__s32	phc_index;
+	__u32	tx_types;
+	__u32	tx_reserved[3];
+	__u32	rx_filters;
+	__u32	rx_reserved[3];
+};
+
+/*
+ * %ETHTOOL_SFEATURES changes features present in features[].valid to the
+ * values of corresponding bits in features[].requested. Bits in .requested
+ * not set in .valid or not changeable are ignored.
+ *
+ * Returns %EINVAL when .valid contains undefined or never-changeable bits
+ * or size is not equal to required number of features words (32-bit blocks).
+ * Returns >= 0 if request was completed; bits set in the value mean:
+ *   %ETHTOOL_F_UNSUPPORTED - there were bits set in .valid that are not
+ *	changeable (not present in %ETHTOOL_GFEATURES' features[].available)
+ *	those bits were ignored.
+ *   %ETHTOOL_F_WISH - some or all changes requested were recorded but the
+ *      resulting state of bits masked by .valid is not equal to .requested.
+ *      Probably there are other device-specific constraints on some features
+ *      in the set. When %ETHTOOL_F_UNSUPPORTED is set, .valid is considered
+ *      here as though ignored bits were cleared.
+ *   %ETHTOOL_F_COMPAT - some or all changes requested were made by calling
+ *      compatibility functions. Requested offload state cannot be properly
+ *      managed by kernel.
+ *
+ * Meaning of bits in the masks are obtained by %ETHTOOL_GSSET_INFO (number of
+ * bits in the arrays - always multiple of 32) and %ETHTOOL_GSTRINGS commands
+ * for ETH_SS_FEATURES string set. First entry in the table corresponds to least
+ * significant bit in features[0] fields. Empty strings mark undefined features.
+ */
+enum ethtool_sfeatures_retval_bits {
+	ETHTOOL_F_UNSUPPORTED__BIT,
+	ETHTOOL_F_WISH__BIT,
+	ETHTOOL_F_COMPAT__BIT,
+};
+
+#define ETHTOOL_F_UNSUPPORTED   (1 << ETHTOOL_F_UNSUPPORTED__BIT)
+#define ETHTOOL_F_WISH          (1 << ETHTOOL_F_WISH__BIT)
+#define ETHTOOL_F_COMPAT        (1 << ETHTOOL_F_COMPAT__BIT)
+
+
+/* CMDs currently supported */
+#define ETHTOOL_GSET		0x00000001 /* Get settings. */
+#define ETHTOOL_SSET		0x00000002 /* Set settings. */
+#define ETHTOOL_GDRVINFO	0x00000003 /* Get driver info. */
+#define ETHTOOL_GREGS		0x00000004 /* Get NIC registers. */
+#define ETHTOOL_GWOL		0x00000005 /* Get wake-on-lan options. */
+#define ETHTOOL_SWOL		0x00000006 /* Set wake-on-lan options. */
+#define ETHTOOL_GMSGLVL		0x00000007 /* Get driver message level */
+#define ETHTOOL_SMSGLVL		0x00000008 /* Set driver msg level. */
+#define ETHTOOL_NWAY_RST	0x00000009 /* Restart autonegotiation. */
+/* Get link status for host, i.e. whether the interface *and* the
+ * physical port (if there is one) are up (ethtool_value). */
+#define ETHTOOL_GLINK		0x0000000a
+#define ETHTOOL_GEEPROM		0x0000000b /* Get EEPROM data */
+#define ETHTOOL_SEEPROM		0x0000000c /* Set EEPROM data. */
+#define ETHTOOL_GCOALESCE	0x0000000e /* Get coalesce config */
+#define ETHTOOL_SCOALESCE	0x0000000f /* Set coalesce config. */
+#define ETHTOOL_GRINGPARAM	0x00000010 /* Get ring parameters */
+#define ETHTOOL_SRINGPARAM	0x00000011 /* Set ring parameters. */
+#define ETHTOOL_GPAUSEPARAM	0x00000012 /* Get pause parameters */
+#define ETHTOOL_SPAUSEPARAM	0x00000013 /* Set pause parameters. */
+#define ETHTOOL_GRXCSUM		0x00000014 /* Get RX hw csum enable (ethtool_value) */
+#define ETHTOOL_SRXCSUM		0x00000015 /* Set RX hw csum enable (ethtool_value) */
+#define ETHTOOL_GTXCSUM		0x00000016 /* Get TX hw csum enable (ethtool_value) */
+#define ETHTOOL_STXCSUM		0x00000017 /* Set TX hw csum enable (ethtool_value) */
+#define ETHTOOL_GSG		0x00000018 /* Get scatter-gather enable
+					    * (ethtool_value) */
+#define ETHTOOL_SSG		0x00000019 /* Set scatter-gather enable
+					    * (ethtool_value). */
+#define ETHTOOL_TEST		0x0000001a /* execute NIC self-test. */
+#define ETHTOOL_GSTRINGS	0x0000001b /* get specified string set */
+#define ETHTOOL_PHYS_ID		0x0000001c /* identify the NIC */
+#define ETHTOOL_GSTATS		0x0000001d /* get NIC-specific statistics */
+#define ETHTOOL_GTSO		0x0000001e /* Get TSO enable (ethtool_value) */
+#define ETHTOOL_STSO		0x0000001f /* Set TSO enable (ethtool_value) */
+#define ETHTOOL_GPERMADDR	0x00000020 /* Get permanent hardware address */
+#define ETHTOOL_GUFO		0x00000021 /* Get UFO enable (ethtool_value) */
+#define ETHTOOL_SUFO		0x00000022 /* Set UFO enable (ethtool_value) */
+#define ETHTOOL_GGSO		0x00000023 /* Get GSO enable (ethtool_value) */
+#define ETHTOOL_SGSO		0x00000024 /* Set GSO enable (ethtool_value) */
+#define ETHTOOL_GFLAGS		0x00000025 /* Get flags bitmap(ethtool_value) */
+#define ETHTOOL_SFLAGS		0x00000026 /* Set flags bitmap(ethtool_value) */
+#define ETHTOOL_GPFLAGS		0x00000027 /* Get driver-private flags bitmap */
+#define ETHTOOL_SPFLAGS		0x00000028 /* Set driver-private flags bitmap */
+
+#define ETHTOOL_GRXFH		0x00000029 /* Get RX flow hash configuration */
+#define ETHTOOL_SRXFH		0x0000002a /* Set RX flow hash configuration */
+#define ETHTOOL_GGRO		0x0000002b /* Get GRO enable (ethtool_value) */
+#define ETHTOOL_SGRO		0x0000002c /* Set GRO enable (ethtool_value) */
+#define ETHTOOL_GRXRINGS	0x0000002d /* Get RX rings available for LB */
+#define ETHTOOL_GRXCLSRLCNT	0x0000002e /* Get RX class rule count */
+#define ETHTOOL_GRXCLSRULE	0x0000002f /* Get RX classification rule */
+#define ETHTOOL_GRXCLSRLALL	0x00000030 /* Get all RX classification rule */
+#define ETHTOOL_SRXCLSRLDEL	0x00000031 /* Delete RX classification rule */
+#define ETHTOOL_SRXCLSRLINS	0x00000032 /* Insert RX classification rule */
+#define ETHTOOL_FLASHDEV	0x00000033 /* Flash firmware to device */
+#define ETHTOOL_RESET		0x00000034 /* Reset hardware */
+#define ETHTOOL_SRXNTUPLE	0x00000035 /* Add an n-tuple filter to device */
+#define ETHTOOL_GRXNTUPLE	0x00000036 /* deprecated */
+#define ETHTOOL_GSSET_INFO	0x00000037 /* Get string set info */
+#define ETHTOOL_GRXFHINDIR	0x00000038 /* Get RX flow hash indir'n table */
+#define ETHTOOL_SRXFHINDIR	0x00000039 /* Set RX flow hash indir'n table */
+
+#define ETHTOOL_GFEATURES	0x0000003a /* Get device offload settings */
+#define ETHTOOL_SFEATURES	0x0000003b /* Change device offload settings */
+#define ETHTOOL_GCHANNELS	0x0000003c /* Get no of channels */
+#define ETHTOOL_SCHANNELS	0x0000003d /* Set no of channels */
+#define ETHTOOL_SET_DUMP	0x0000003e /* Set dump settings */
+#define ETHTOOL_GET_DUMP_FLAG	0x0000003f /* Get dump settings */
+#define ETHTOOL_GET_DUMP_DATA	0x00000040 /* Get dump data */
+#define ETHTOOL_GET_TS_INFO	0x00000041 /* Get time stamping and PHC info */
+#define ETHTOOL_GMODULEINFO	0x00000042 /* Get plug-in module information */
+#define ETHTOOL_GMODULEEEPROM	0x00000043 /* Get plug-in module eeprom */
+#define ETHTOOL_GEEE		0x00000044 /* Get EEE settings */
+#define ETHTOOL_SEEE		0x00000045 /* Set EEE settings */
+
+/* compatibility with older code */
+#define SPARC_ETH_GSET		ETHTOOL_GSET
+#define SPARC_ETH_SSET		ETHTOOL_SSET
+
+/* Indicates what features are supported by the interface. */
+#define SUPPORTED_10baseT_Half		(1 << 0)
+#define SUPPORTED_10baseT_Full		(1 << 1)
+#define SUPPORTED_100baseT_Half		(1 << 2)
+#define SUPPORTED_100baseT_Full		(1 << 3)
+#define SUPPORTED_1000baseT_Half	(1 << 4)
+#define SUPPORTED_1000baseT_Full	(1 << 5)
+#define SUPPORTED_Autoneg		(1 << 6)
+#define SUPPORTED_TP			(1 << 7)
+#define SUPPORTED_AUI			(1 << 8)
+#define SUPPORTED_MII			(1 << 9)
+#define SUPPORTED_FIBRE			(1 << 10)
+#define SUPPORTED_BNC			(1 << 11)
+#define SUPPORTED_10000baseT_Full	(1 << 12)
+#define SUPPORTED_Pause			(1 << 13)
+#define SUPPORTED_Asym_Pause		(1 << 14)
+#define SUPPORTED_2500baseX_Full	(1 << 15)
+#define SUPPORTED_Backplane		(1 << 16)
+#define SUPPORTED_1000baseKX_Full	(1 << 17)
+#define SUPPORTED_10000baseKX4_Full	(1 << 18)
+#define SUPPORTED_10000baseKR_Full	(1 << 19)
+#define SUPPORTED_10000baseR_FEC	(1 << 20)
+#define SUPPORTED_20000baseMLD2_Full	(1 << 21)
+#define SUPPORTED_20000baseKR2_Full	(1 << 22)
+#define SUPPORTED_40000baseKR4_Full	(1 << 23)
+#define SUPPORTED_40000baseCR4_Full	(1 << 24)
+#define SUPPORTED_40000baseSR4_Full	(1 << 25)
+#define SUPPORTED_40000baseLR4_Full	(1 << 26)
+
+/* Indicates what features are advertised by the interface. */
+#define ADVERTISED_10baseT_Half		(1 << 0)
+#define ADVERTISED_10baseT_Full		(1 << 1)
+#define ADVERTISED_100baseT_Half	(1 << 2)
+#define ADVERTISED_100baseT_Full	(1 << 3)
+#define ADVERTISED_1000baseT_Half	(1 << 4)
+#define ADVERTISED_1000baseT_Full	(1 << 5)
+#define ADVERTISED_Autoneg		(1 << 6)
+#define ADVERTISED_TP			(1 << 7)
+#define ADVERTISED_AUI			(1 << 8)
+#define ADVERTISED_MII			(1 << 9)
+#define ADVERTISED_FIBRE		(1 << 10)
+#define ADVERTISED_BNC			(1 << 11)
+#define ADVERTISED_10000baseT_Full	(1 << 12)
+#define ADVERTISED_Pause		(1 << 13)
+#define ADVERTISED_Asym_Pause		(1 << 14)
+#define ADVERTISED_2500baseX_Full	(1 << 15)
+#define ADVERTISED_Backplane		(1 << 16)
+#define ADVERTISED_1000baseKX_Full	(1 << 17)
+#define ADVERTISED_10000baseKX4_Full	(1 << 18)
+#define ADVERTISED_10000baseKR_Full	(1 << 19)
+#define ADVERTISED_10000baseR_FEC	(1 << 20)
+#define ADVERTISED_20000baseMLD2_Full	(1 << 21)
+#define ADVERTISED_20000baseKR2_Full	(1 << 22)
+#define ADVERTISED_40000baseKR4_Full	(1 << 23)
+#define ADVERTISED_40000baseCR4_Full	(1 << 24)
+#define ADVERTISED_40000baseSR4_Full	(1 << 25)
+#define ADVERTISED_40000baseLR4_Full	(1 << 26)
+
+/* The following are all involved in forcing a particular link
+ * mode for the device for setting things.  When getting the
+ * devices settings, these indicate the current mode and whether
+ * it was forced up into this mode or autonegotiated.
+ */
+
+/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */
+#define SPEED_10		10
+#define SPEED_100		100
+#define SPEED_1000		1000
+#define SPEED_2500		2500
+#define SPEED_10000		10000
+#define SPEED_UNKNOWN		-1
+
+/* Duplex, half or full. */
+#define DUPLEX_HALF		0x00
+#define DUPLEX_FULL		0x01
+#define DUPLEX_UNKNOWN		0xff
+
+/* Which connector port. */
+#define PORT_TP			0x00
+#define PORT_AUI		0x01
+#define PORT_MII		0x02
+#define PORT_FIBRE		0x03
+#define PORT_BNC		0x04
+#define PORT_DA			0x05
+#define PORT_NONE		0xef
+#define PORT_OTHER		0xff
+
+/* Which transceiver to use. */
+#define XCVR_INTERNAL		0x00
+#define XCVR_EXTERNAL		0x01
+#define XCVR_DUMMY1		0x02
+#define XCVR_DUMMY2		0x03
+#define XCVR_DUMMY3		0x04
+
+/* Enable or disable autonegotiation.  If this is set to enable,
+ * the forced link modes above are completely ignored.
+ */
+#define AUTONEG_DISABLE		0x00
+#define AUTONEG_ENABLE		0x01
+
+/* MDI or MDI-X status/control - if MDI/MDI_X/AUTO is set then
+ * the driver is required to renegotiate link
+ */
+#define ETH_TP_MDI_INVALID	0x00 /* status: unknown; control: unsupported */
+#define ETH_TP_MDI		0x01 /* status: MDI;     control: force MDI */
+#define ETH_TP_MDI_X		0x02 /* status: MDI-X;   control: force MDI-X */
+#define ETH_TP_MDI_AUTO		0x03 /*                  control: auto-select */
+
+/* Wake-On-Lan options. */
+#define WAKE_PHY		(1 << 0)
+#define WAKE_UCAST		(1 << 1)
+#define WAKE_MCAST		(1 << 2)
+#define WAKE_BCAST		(1 << 3)
+#define WAKE_ARP		(1 << 4)
+#define WAKE_MAGIC		(1 << 5)
+#define WAKE_MAGICSECURE	(1 << 6) /* only meaningful if WAKE_MAGIC */
+
+/* L2-L4 network traffic flow types */
+#define	TCP_V4_FLOW	0x01	/* hash or spec (tcp_ip4_spec) */
+#define	UDP_V4_FLOW	0x02	/* hash or spec (udp_ip4_spec) */
+#define	SCTP_V4_FLOW	0x03	/* hash or spec (sctp_ip4_spec) */
+#define	AH_ESP_V4_FLOW	0x04	/* hash only */
+#define	TCP_V6_FLOW	0x05	/* hash only */
+#define	UDP_V6_FLOW	0x06	/* hash only */
+#define	SCTP_V6_FLOW	0x07	/* hash only */
+#define	AH_ESP_V6_FLOW	0x08	/* hash only */
+#define	AH_V4_FLOW	0x09	/* hash or spec (ah_ip4_spec) */
+#define	ESP_V4_FLOW	0x0a	/* hash or spec (esp_ip4_spec) */
+#define	AH_V6_FLOW	0x0b	/* hash only */
+#define	ESP_V6_FLOW	0x0c	/* hash only */
+#define	IP_USER_FLOW	0x0d	/* spec only (usr_ip4_spec) */
+#define	IPV4_FLOW	0x10	/* hash only */
+#define	IPV6_FLOW	0x11	/* hash only */
+#define	ETHER_FLOW	0x12	/* spec only (ether_spec) */
+/* Flag to enable additional fields in struct ethtool_rx_flow_spec */
+#define	FLOW_EXT	0x80000000
+
+/* L3-L4 network traffic flow hash options */
+#define	RXH_L2DA	(1 << 1)
+#define	RXH_VLAN	(1 << 2)
+#define	RXH_L3_PROTO	(1 << 3)
+#define	RXH_IP_SRC	(1 << 4)
+#define	RXH_IP_DST	(1 << 5)
+#define	RXH_L4_B_0_1	(1 << 6) /* src port in case of TCP/UDP/SCTP */
+#define	RXH_L4_B_2_3	(1 << 7) /* dst port in case of TCP/UDP/SCTP */
+#define	RXH_DISCARD	(1 << 31)
+
+#define	RX_CLS_FLOW_DISC	0xffffffffffffffffULL
+
+/* Special RX classification rule insert location values */
+#define RX_CLS_LOC_SPECIAL	0x80000000	/* flag */
+#define RX_CLS_LOC_ANY		0xffffffff
+#define RX_CLS_LOC_FIRST	0xfffffffe
+#define RX_CLS_LOC_LAST		0xfffffffd
+
+/* EEPROM Standards for plug in modules */
+#define ETH_MODULE_SFF_8079		0x1
+#define ETH_MODULE_SFF_8079_LEN		256
+#define ETH_MODULE_SFF_8472		0x2
+#define ETH_MODULE_SFF_8472_LEN		512
+
+/* Reset flags */
+/* The reset() operation must clear the flags for the components which
+ * were actually reset.  On successful return, the flags indicate the
+ * components which were not reset, either because they do not exist
+ * in the hardware or because they cannot be reset independently.  The
+ * driver must never reset any components that were not requested.
+ */
+enum ethtool_reset_flags {
+	/* These flags represent components dedicated to the interface
+	 * the command is addressed to.  Shift any flag left by
+	 * ETH_RESET_SHARED_SHIFT to reset a shared component of the
+	 * same type.
+	 */
+	ETH_RESET_MGMT		= 1 << 0,	/* Management processor */
+	ETH_RESET_IRQ		= 1 << 1,	/* Interrupt requester */
+	ETH_RESET_DMA		= 1 << 2,	/* DMA engine */
+	ETH_RESET_FILTER	= 1 << 3,	/* Filtering/flow direction */
+	ETH_RESET_OFFLOAD	= 1 << 4,	/* Protocol offload */
+	ETH_RESET_MAC		= 1 << 5,	/* Media access controller */
+	ETH_RESET_PHY		= 1 << 6,	/* Transceiver/PHY */
+	ETH_RESET_RAM		= 1 << 7,	/* RAM shared between
+						 * multiple components */
+
+	ETH_RESET_DEDICATED	= 0x0000ffff,	/* All components dedicated to
+						 * this interface */
+	ETH_RESET_ALL		= 0xffffffff,	/* All components used by this
+						 * interface, even if shared */
+};
+#define ETH_RESET_SHARED_SHIFT	16
+
+#endif /* _UAPI_LINUX_ETHTOOL_H */
diff --git a/include/uapi/linux/eventpoll.h b/include/uapi/linux/eventpoll.h
new file mode 100644
index 00000000000..8c99ce7202c
--- /dev/null
+++ b/include/uapi/linux/eventpoll.h
@@ -0,0 +1,66 @@
+/*
+ *  include/linux/eventpoll.h ( Efficient event polling implementation )
+ *  Copyright (C) 2001,...,2006	 Davide Libenzi
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  Davide Libenzi <davidel@xmailserver.org>
+ *
+ */
+
+#ifndef _UAPI_LINUX_EVENTPOLL_H
+#define _UAPI_LINUX_EVENTPOLL_H
+
+/* For O_CLOEXEC */
+#include <linux/fcntl.h>
+#include <linux/types.h>
+
+/* Flags for epoll_create1.  */
+#define EPOLL_CLOEXEC O_CLOEXEC
+
+/* Valid opcodes to issue to sys_epoll_ctl() */
+#define EPOLL_CTL_ADD 1
+#define EPOLL_CTL_DEL 2
+#define EPOLL_CTL_MOD 3
+#define EPOLL_CTL_DISABLE 4
+
+/*
+ * Request the handling of system wakeup events so as to prevent system suspends
+ * from happening while those events are being processed.
+ *
+ * Assuming neither EPOLLET nor EPOLLONESHOT is set, system suspends will not be
+ * re-allowed until epoll_wait is called again after consuming the wakeup
+ * event(s).
+ *
+ * Requires CAP_BLOCK_SUSPEND
+ */
+#define EPOLLWAKEUP (1 << 29)
+
+/* Set the One Shot behaviour for the target file descriptor */
+#define EPOLLONESHOT (1 << 30)
+
+/* Set the Edge Triggered behaviour for the target file descriptor */
+#define EPOLLET (1 << 31)
+
+/* 
+ * On x86-64 make the 64bit structure have the same alignment as the
+ * 32bit structure. This makes 32bit emulation easier.
+ *
+ * UML/x86_64 needs the same packing as x86_64
+ */
+#ifdef __x86_64__
+#define EPOLL_PACKED __attribute__((packed))
+#else
+#define EPOLL_PACKED
+#endif
+
+struct epoll_event {
+	__u32 events;
+	__u64 data;
+} EPOLL_PACKED;
+
+
+#endif /* _UAPI_LINUX_EVENTPOLL_H */
diff --git a/include/uapi/linux/fadvise.h b/include/uapi/linux/fadvise.h
new file mode 100644
index 00000000000..e8e747139b9
--- /dev/null
+++ b/include/uapi/linux/fadvise.h
@@ -0,0 +1,21 @@
+#ifndef FADVISE_H_INCLUDED
+#define FADVISE_H_INCLUDED
+
+#define POSIX_FADV_NORMAL	0 /* No further special treatment.  */
+#define POSIX_FADV_RANDOM	1 /* Expect random page references.  */
+#define POSIX_FADV_SEQUENTIAL	2 /* Expect sequential page references.  */
+#define POSIX_FADV_WILLNEED	3 /* Will need these pages.  */
+
+/*
+ * The advise values for POSIX_FADV_DONTNEED and POSIX_ADV_NOREUSE
+ * for s390-64 differ from the values for the rest of the world.
+ */
+#if defined(__s390x__)
+#define POSIX_FADV_DONTNEED	6 /* Don't need these pages.  */
+#define POSIX_FADV_NOREUSE	7 /* Data will be accessed once.  */
+#else
+#define POSIX_FADV_DONTNEED	4 /* Don't need these pages.  */
+#define POSIX_FADV_NOREUSE	5 /* Data will be accessed once.  */
+#endif
+
+#endif	/* FADVISE_H_INCLUDED */
diff --git a/include/uapi/linux/falloc.h b/include/uapi/linux/falloc.h
new file mode 100644
index 00000000000..990c4ccf8b6
--- /dev/null
+++ b/include/uapi/linux/falloc.h
@@ -0,0 +1,9 @@
+#ifndef _UAPI_FALLOC_H_
+#define _UAPI_FALLOC_H_
+
+#define FALLOC_FL_KEEP_SIZE	0x01 /* default is extend size */
+#define FALLOC_FL_PUNCH_HOLE	0x02 /* de-allocates range */
+#define FALLOC_FL_NO_HIDE_STALE	0x04 /* reserved codepoint */
+
+
+#endif /* _UAPI_FALLOC_H_ */
diff --git a/include/uapi/linux/fanotify.h b/include/uapi/linux/fanotify.h
new file mode 100644
index 00000000000..030508d195d
--- /dev/null
+++ b/include/uapi/linux/fanotify.h
@@ -0,0 +1,116 @@
+#ifndef _UAPI_LINUX_FANOTIFY_H
+#define _UAPI_LINUX_FANOTIFY_H
+
+#include <linux/types.h>
+
+/* the following events that user-space can register for */
+#define FAN_ACCESS		0x00000001	/* File was accessed */
+#define FAN_MODIFY		0x00000002	/* File was modified */
+#define FAN_CLOSE_WRITE		0x00000008	/* Writtable file closed */
+#define FAN_CLOSE_NOWRITE	0x00000010	/* Unwrittable file closed */
+#define FAN_OPEN		0x00000020	/* File was opened */
+
+#define FAN_Q_OVERFLOW		0x00004000	/* Event queued overflowed */
+
+#define FAN_OPEN_PERM		0x00010000	/* File open in perm check */
+#define FAN_ACCESS_PERM		0x00020000	/* File accessed in perm check */
+
+#define FAN_ONDIR		0x40000000	/* event occurred against dir */
+
+#define FAN_EVENT_ON_CHILD	0x08000000	/* interested in child events */
+
+/* helper events */
+#define FAN_CLOSE		(FAN_CLOSE_WRITE | FAN_CLOSE_NOWRITE) /* close */
+
+/* flags used for fanotify_init() */
+#define FAN_CLOEXEC		0x00000001
+#define FAN_NONBLOCK		0x00000002
+
+/* These are NOT bitwise flags.  Both bits are used togther.  */
+#define FAN_CLASS_NOTIF		0x00000000
+#define FAN_CLASS_CONTENT	0x00000004
+#define FAN_CLASS_PRE_CONTENT	0x00000008
+#define FAN_ALL_CLASS_BITS	(FAN_CLASS_NOTIF | FAN_CLASS_CONTENT | \
+				 FAN_CLASS_PRE_CONTENT)
+
+#define FAN_UNLIMITED_QUEUE	0x00000010
+#define FAN_UNLIMITED_MARKS	0x00000020
+
+#define FAN_ALL_INIT_FLAGS	(FAN_CLOEXEC | FAN_NONBLOCK | \
+				 FAN_ALL_CLASS_BITS | FAN_UNLIMITED_QUEUE |\
+				 FAN_UNLIMITED_MARKS)
+
+/* flags used for fanotify_modify_mark() */
+#define FAN_MARK_ADD		0x00000001
+#define FAN_MARK_REMOVE		0x00000002
+#define FAN_MARK_DONT_FOLLOW	0x00000004
+#define FAN_MARK_ONLYDIR	0x00000008
+#define FAN_MARK_MOUNT		0x00000010
+#define FAN_MARK_IGNORED_MASK	0x00000020
+#define FAN_MARK_IGNORED_SURV_MODIFY	0x00000040
+#define FAN_MARK_FLUSH		0x00000080
+
+#define FAN_ALL_MARK_FLAGS	(FAN_MARK_ADD |\
+				 FAN_MARK_REMOVE |\
+				 FAN_MARK_DONT_FOLLOW |\
+				 FAN_MARK_ONLYDIR |\
+				 FAN_MARK_MOUNT |\
+				 FAN_MARK_IGNORED_MASK |\
+				 FAN_MARK_IGNORED_SURV_MODIFY |\
+				 FAN_MARK_FLUSH)
+
+/*
+ * All of the events - we build the list by hand so that we can add flags in
+ * the future and not break backward compatibility.  Apps will get only the
+ * events that they originally wanted.  Be sure to add new events here!
+ */
+#define FAN_ALL_EVENTS (FAN_ACCESS |\
+			FAN_MODIFY |\
+			FAN_CLOSE |\
+			FAN_OPEN)
+
+/*
+ * All events which require a permission response from userspace
+ */
+#define FAN_ALL_PERM_EVENTS (FAN_OPEN_PERM |\
+			     FAN_ACCESS_PERM)
+
+#define FAN_ALL_OUTGOING_EVENTS	(FAN_ALL_EVENTS |\
+				 FAN_ALL_PERM_EVENTS |\
+				 FAN_Q_OVERFLOW)
+
+#define FANOTIFY_METADATA_VERSION	3
+
+struct fanotify_event_metadata {
+	__u32 event_len;
+	__u8 vers;
+	__u8 reserved;
+	__u16 metadata_len;
+	__aligned_u64 mask;
+	__s32 fd;
+	__s32 pid;
+};
+
+struct fanotify_response {
+	__s32 fd;
+	__u32 response;
+};
+
+/* Legit userspace responses to a _PERM event */
+#define FAN_ALLOW	0x01
+#define FAN_DENY	0x02
+/* No fd set in event */
+#define FAN_NOFD	-1
+
+/* Helper functions to deal with fanotify_event_metadata buffers */
+#define FAN_EVENT_METADATA_LEN (sizeof(struct fanotify_event_metadata))
+
+#define FAN_EVENT_NEXT(meta, len) ((len) -= (meta)->event_len, \
+				   (struct fanotify_event_metadata*)(((char *)(meta)) + \
+				   (meta)->event_len))
+
+#define FAN_EVENT_OK(meta, len)	((long)(len) >= (long)FAN_EVENT_METADATA_LEN && \
+				(long)(meta)->event_len >= (long)FAN_EVENT_METADATA_LEN && \
+				(long)(meta)->event_len <= (long)(len))
+
+#endif /* _UAPI_LINUX_FANOTIFY_H */
diff --git a/include/uapi/linux/fb.h b/include/uapi/linux/fb.h
new file mode 100644
index 00000000000..fb795c3b3c1
--- /dev/null
+++ b/include/uapi/linux/fb.h
@@ -0,0 +1,402 @@
+#ifndef _UAPI_LINUX_FB_H
+#define _UAPI_LINUX_FB_H
+
+#include <linux/types.h>
+#include <linux/i2c.h>
+
+/* Definitions of frame buffers						*/
+
+#define FB_MAX			32	/* sufficient for now */
+
+/* ioctls
+   0x46 is 'F'								*/
+#define FBIOGET_VSCREENINFO	0x4600
+#define FBIOPUT_VSCREENINFO	0x4601
+#define FBIOGET_FSCREENINFO	0x4602
+#define FBIOGETCMAP		0x4604
+#define FBIOPUTCMAP		0x4605
+#define FBIOPAN_DISPLAY		0x4606
+#ifndef __KERNEL__
+#define FBIO_CURSOR            _IOWR('F', 0x08, struct fb_cursor)
+#endif
+/* 0x4607-0x460B are defined below */
+/* #define FBIOGET_MONITORSPEC	0x460C */
+/* #define FBIOPUT_MONITORSPEC	0x460D */
+/* #define FBIOSWITCH_MONIBIT	0x460E */
+#define FBIOGET_CON2FBMAP	0x460F
+#define FBIOPUT_CON2FBMAP	0x4610
+#define FBIOBLANK		0x4611		/* arg: 0 or vesa level + 1 */
+#define FBIOGET_VBLANK		_IOR('F', 0x12, struct fb_vblank)
+#define FBIO_ALLOC              0x4613
+#define FBIO_FREE               0x4614
+#define FBIOGET_GLYPH           0x4615
+#define FBIOGET_HWCINFO         0x4616
+#define FBIOPUT_MODEINFO        0x4617
+#define FBIOGET_DISPINFO        0x4618
+#define FBIO_WAITFORVSYNC	_IOW('F', 0x20, __u32)
+
+#define FB_TYPE_PACKED_PIXELS		0	/* Packed Pixels	*/
+#define FB_TYPE_PLANES			1	/* Non interleaved planes */
+#define FB_TYPE_INTERLEAVED_PLANES	2	/* Interleaved planes	*/
+#define FB_TYPE_TEXT			3	/* Text/attributes	*/
+#define FB_TYPE_VGA_PLANES		4	/* EGA/VGA planes	*/
+#define FB_TYPE_FOURCC			5	/* Type identified by a V4L2 FOURCC */
+
+#define FB_AUX_TEXT_MDA		0	/* Monochrome text */
+#define FB_AUX_TEXT_CGA		1	/* CGA/EGA/VGA Color text */
+#define FB_AUX_TEXT_S3_MMIO	2	/* S3 MMIO fasttext */
+#define FB_AUX_TEXT_MGA_STEP16	3	/* MGA Millenium I: text, attr, 14 reserved bytes */
+#define FB_AUX_TEXT_MGA_STEP8	4	/* other MGAs:      text, attr,  6 reserved bytes */
+#define FB_AUX_TEXT_SVGA_GROUP	8	/* 8-15: SVGA tileblit compatible modes */
+#define FB_AUX_TEXT_SVGA_MASK	7	/* lower three bits says step */
+#define FB_AUX_TEXT_SVGA_STEP2	8	/* SVGA text mode:  text, attr */
+#define FB_AUX_TEXT_SVGA_STEP4	9	/* SVGA text mode:  text, attr,  2 reserved bytes */
+#define FB_AUX_TEXT_SVGA_STEP8	10	/* SVGA text mode:  text, attr,  6 reserved bytes */
+#define FB_AUX_TEXT_SVGA_STEP16	11	/* SVGA text mode:  text, attr, 14 reserved bytes */
+#define FB_AUX_TEXT_SVGA_LAST	15	/* reserved up to 15 */
+
+#define FB_AUX_VGA_PLANES_VGA4		0	/* 16 color planes (EGA/VGA) */
+#define FB_AUX_VGA_PLANES_CFB4		1	/* CFB4 in planes (VGA) */
+#define FB_AUX_VGA_PLANES_CFB8		2	/* CFB8 in planes (VGA) */
+
+#define FB_VISUAL_MONO01		0	/* Monochr. 1=Black 0=White */
+#define FB_VISUAL_MONO10		1	/* Monochr. 1=White 0=Black */
+#define FB_VISUAL_TRUECOLOR		2	/* True color	*/
+#define FB_VISUAL_PSEUDOCOLOR		3	/* Pseudo color (like atari) */
+#define FB_VISUAL_DIRECTCOLOR		4	/* Direct color */
+#define FB_VISUAL_STATIC_PSEUDOCOLOR	5	/* Pseudo color readonly */
+#define FB_VISUAL_FOURCC		6	/* Visual identified by a V4L2 FOURCC */
+
+#define FB_ACCEL_NONE		0	/* no hardware accelerator	*/
+#define FB_ACCEL_ATARIBLITT	1	/* Atari Blitter		*/
+#define FB_ACCEL_AMIGABLITT	2	/* Amiga Blitter                */
+#define FB_ACCEL_S3_TRIO64	3	/* Cybervision64 (S3 Trio64)    */
+#define FB_ACCEL_NCR_77C32BLT	4	/* RetinaZ3 (NCR 77C32BLT)      */
+#define FB_ACCEL_S3_VIRGE	5	/* Cybervision64/3D (S3 ViRGE)	*/
+#define FB_ACCEL_ATI_MACH64GX	6	/* ATI Mach 64GX family		*/
+#define FB_ACCEL_DEC_TGA	7	/* DEC 21030 TGA		*/
+#define FB_ACCEL_ATI_MACH64CT	8	/* ATI Mach 64CT family		*/
+#define FB_ACCEL_ATI_MACH64VT	9	/* ATI Mach 64CT family VT class */
+#define FB_ACCEL_ATI_MACH64GT	10	/* ATI Mach 64CT family GT class */
+#define FB_ACCEL_SUN_CREATOR	11	/* Sun Creator/Creator3D	*/
+#define FB_ACCEL_SUN_CGSIX	12	/* Sun cg6			*/
+#define FB_ACCEL_SUN_LEO	13	/* Sun leo/zx			*/
+#define FB_ACCEL_IMS_TWINTURBO	14	/* IMS Twin Turbo		*/
+#define FB_ACCEL_3DLABS_PERMEDIA2 15	/* 3Dlabs Permedia 2		*/
+#define FB_ACCEL_MATROX_MGA2064W 16	/* Matrox MGA2064W (Millenium)	*/
+#define FB_ACCEL_MATROX_MGA1064SG 17	/* Matrox MGA1064SG (Mystique)	*/
+#define FB_ACCEL_MATROX_MGA2164W 18	/* Matrox MGA2164W (Millenium II) */
+#define FB_ACCEL_MATROX_MGA2164W_AGP 19	/* Matrox MGA2164W (Millenium II) */
+#define FB_ACCEL_MATROX_MGAG100	20	/* Matrox G100 (Productiva G100) */
+#define FB_ACCEL_MATROX_MGAG200	21	/* Matrox G200 (Myst, Mill, ...) */
+#define FB_ACCEL_SUN_CG14	22	/* Sun cgfourteen		 */
+#define FB_ACCEL_SUN_BWTWO	23	/* Sun bwtwo			*/
+#define FB_ACCEL_SUN_CGTHREE	24	/* Sun cgthree			*/
+#define FB_ACCEL_SUN_TCX	25	/* Sun tcx			*/
+#define FB_ACCEL_MATROX_MGAG400	26	/* Matrox G400			*/
+#define FB_ACCEL_NV3		27	/* nVidia RIVA 128              */
+#define FB_ACCEL_NV4		28	/* nVidia RIVA TNT		*/
+#define FB_ACCEL_NV5		29	/* nVidia RIVA TNT2		*/
+#define FB_ACCEL_CT_6555x	30	/* C&T 6555x			*/
+#define FB_ACCEL_3DFX_BANSHEE	31	/* 3Dfx Banshee			*/
+#define FB_ACCEL_ATI_RAGE128	32	/* ATI Rage128 family		*/
+#define FB_ACCEL_IGS_CYBER2000	33	/* CyberPro 2000		*/
+#define FB_ACCEL_IGS_CYBER2010	34	/* CyberPro 2010		*/
+#define FB_ACCEL_IGS_CYBER5000	35	/* CyberPro 5000		*/
+#define FB_ACCEL_SIS_GLAMOUR    36	/* SiS 300/630/540              */
+#define FB_ACCEL_3DLABS_PERMEDIA3 37	/* 3Dlabs Permedia 3		*/
+#define FB_ACCEL_ATI_RADEON	38	/* ATI Radeon family		*/
+#define FB_ACCEL_I810           39      /* Intel 810/815                */
+#define FB_ACCEL_SIS_GLAMOUR_2  40	/* SiS 315, 650, 740		*/
+#define FB_ACCEL_SIS_XABRE      41	/* SiS 330 ("Xabre")		*/
+#define FB_ACCEL_I830           42      /* Intel 830M/845G/85x/865G     */
+#define FB_ACCEL_NV_10          43      /* nVidia Arch 10               */
+#define FB_ACCEL_NV_20          44      /* nVidia Arch 20               */
+#define FB_ACCEL_NV_30          45      /* nVidia Arch 30               */
+#define FB_ACCEL_NV_40          46      /* nVidia Arch 40               */
+#define FB_ACCEL_XGI_VOLARI_V	47	/* XGI Volari V3XT, V5, V8      */
+#define FB_ACCEL_XGI_VOLARI_Z	48	/* XGI Volari Z7                */
+#define FB_ACCEL_OMAP1610	49	/* TI OMAP16xx                  */
+#define FB_ACCEL_TRIDENT_TGUI	50	/* Trident TGUI			*/
+#define FB_ACCEL_TRIDENT_3DIMAGE 51	/* Trident 3DImage		*/
+#define FB_ACCEL_TRIDENT_BLADE3D 52	/* Trident Blade3D		*/
+#define FB_ACCEL_TRIDENT_BLADEXP 53	/* Trident BladeXP		*/
+#define FB_ACCEL_CIRRUS_ALPINE   53	/* Cirrus Logic 543x/544x/5480	*/
+#define FB_ACCEL_NEOMAGIC_NM2070 90	/* NeoMagic NM2070              */
+#define FB_ACCEL_NEOMAGIC_NM2090 91	/* NeoMagic NM2090              */
+#define FB_ACCEL_NEOMAGIC_NM2093 92	/* NeoMagic NM2093              */
+#define FB_ACCEL_NEOMAGIC_NM2097 93	/* NeoMagic NM2097              */
+#define FB_ACCEL_NEOMAGIC_NM2160 94	/* NeoMagic NM2160              */
+#define FB_ACCEL_NEOMAGIC_NM2200 95	/* NeoMagic NM2200              */
+#define FB_ACCEL_NEOMAGIC_NM2230 96	/* NeoMagic NM2230              */
+#define FB_ACCEL_NEOMAGIC_NM2360 97	/* NeoMagic NM2360              */
+#define FB_ACCEL_NEOMAGIC_NM2380 98	/* NeoMagic NM2380              */
+#define FB_ACCEL_PXA3XX		 99	/* PXA3xx			*/
+
+#define FB_ACCEL_SAVAGE4        0x80	/* S3 Savage4                   */
+#define FB_ACCEL_SAVAGE3D       0x81	/* S3 Savage3D                  */
+#define FB_ACCEL_SAVAGE3D_MV    0x82	/* S3 Savage3D-MV               */
+#define FB_ACCEL_SAVAGE2000     0x83	/* S3 Savage2000                */
+#define FB_ACCEL_SAVAGE_MX_MV   0x84	/* S3 Savage/MX-MV              */
+#define FB_ACCEL_SAVAGE_MX      0x85	/* S3 Savage/MX                 */
+#define FB_ACCEL_SAVAGE_IX_MV   0x86	/* S3 Savage/IX-MV              */
+#define FB_ACCEL_SAVAGE_IX      0x87	/* S3 Savage/IX                 */
+#define FB_ACCEL_PROSAVAGE_PM   0x88	/* S3 ProSavage PM133           */
+#define FB_ACCEL_PROSAVAGE_KM   0x89	/* S3 ProSavage KM133           */
+#define FB_ACCEL_S3TWISTER_P    0x8a	/* S3 Twister                   */
+#define FB_ACCEL_S3TWISTER_K    0x8b	/* S3 TwisterK                  */
+#define FB_ACCEL_SUPERSAVAGE    0x8c    /* S3 Supersavage               */
+#define FB_ACCEL_PROSAVAGE_DDR  0x8d	/* S3 ProSavage DDR             */
+#define FB_ACCEL_PROSAVAGE_DDRK 0x8e	/* S3 ProSavage DDR-K           */
+
+#define FB_ACCEL_PUV3_UNIGFX	0xa0	/* PKUnity-v3 Unigfx		*/
+
+#define FB_CAP_FOURCC		1	/* Device supports FOURCC-based formats */
+
+struct fb_fix_screeninfo {
+	char id[16];			/* identification string eg "TT Builtin" */
+	unsigned long smem_start;	/* Start of frame buffer mem */
+					/* (physical address) */
+	__u32 smem_len;			/* Length of frame buffer mem */
+	__u32 type;			/* see FB_TYPE_*		*/
+	__u32 type_aux;			/* Interleave for interleaved Planes */
+	__u32 visual;			/* see FB_VISUAL_*		*/ 
+	__u16 xpanstep;			/* zero if no hardware panning  */
+	__u16 ypanstep;			/* zero if no hardware panning  */
+	__u16 ywrapstep;		/* zero if no hardware ywrap    */
+	__u32 line_length;		/* length of a line in bytes    */
+	unsigned long mmio_start;	/* Start of Memory Mapped I/O   */
+					/* (physical address) */
+	__u32 mmio_len;			/* Length of Memory Mapped I/O  */
+	__u32 accel;			/* Indicate to driver which	*/
+					/*  specific chip/card we have	*/
+	__u16 capabilities;		/* see FB_CAP_*			*/
+	__u16 reserved[2];		/* Reserved for future compatibility */
+};
+
+/* Interpretation of offset for color fields: All offsets are from the right,
+ * inside a "pixel" value, which is exactly 'bits_per_pixel' wide (means: you
+ * can use the offset as right argument to <<). A pixel afterwards is a bit
+ * stream and is written to video memory as that unmodified.
+ *
+ * For pseudocolor: offset and length should be the same for all color
+ * components. Offset specifies the position of the least significant bit
+ * of the pallette index in a pixel value. Length indicates the number
+ * of available palette entries (i.e. # of entries = 1 << length).
+ */
+struct fb_bitfield {
+	__u32 offset;			/* beginning of bitfield	*/
+	__u32 length;			/* length of bitfield		*/
+	__u32 msb_right;		/* != 0 : Most significant bit is */ 
+					/* right */ 
+};
+
+#define FB_NONSTD_HAM		1	/* Hold-And-Modify (HAM)        */
+#define FB_NONSTD_REV_PIX_IN_B	2	/* order of pixels in each byte is reversed */
+
+#define FB_ACTIVATE_NOW		0	/* set values immediately (or vbl)*/
+#define FB_ACTIVATE_NXTOPEN	1	/* activate on next open	*/
+#define FB_ACTIVATE_TEST	2	/* don't set, round up impossible */
+#define FB_ACTIVATE_MASK       15
+					/* values			*/
+#define FB_ACTIVATE_VBL	       16	/* activate values on next vbl  */
+#define FB_CHANGE_CMAP_VBL     32	/* change colormap on vbl	*/
+#define FB_ACTIVATE_ALL	       64	/* change all VCs on this fb	*/
+#define FB_ACTIVATE_FORCE     128	/* force apply even when no change*/
+#define FB_ACTIVATE_INV_MODE  256       /* invalidate videomode */
+
+#define FB_ACCELF_TEXT		1	/* (OBSOLETE) see fb_info.flags and vc_mode */
+
+#define FB_SYNC_HOR_HIGH_ACT	1	/* horizontal sync high active	*/
+#define FB_SYNC_VERT_HIGH_ACT	2	/* vertical sync high active	*/
+#define FB_SYNC_EXT		4	/* external sync		*/
+#define FB_SYNC_COMP_HIGH_ACT	8	/* composite sync high active   */
+#define FB_SYNC_BROADCAST	16	/* broadcast video timings      */
+					/* vtotal = 144d/288n/576i => PAL  */
+					/* vtotal = 121d/242n/484i => NTSC */
+#define FB_SYNC_ON_GREEN	32	/* sync on green */
+
+#define FB_VMODE_NONINTERLACED  0	/* non interlaced */
+#define FB_VMODE_INTERLACED	1	/* interlaced	*/
+#define FB_VMODE_DOUBLE		2	/* double scan */
+#define FB_VMODE_ODD_FLD_FIRST	4	/* interlaced: top line first */
+#define FB_VMODE_MASK		255
+
+#define FB_VMODE_YWRAP		256	/* ywrap instead of panning     */
+#define FB_VMODE_SMOOTH_XPAN	512	/* smooth xpan possible (internally used) */
+#define FB_VMODE_CONUPDATE	512	/* don't update x/yoffset	*/
+
+/*
+ * Display rotation support
+ */
+#define FB_ROTATE_UR      0
+#define FB_ROTATE_CW      1
+#define FB_ROTATE_UD      2
+#define FB_ROTATE_CCW     3
+
+#define PICOS2KHZ(a) (1000000000UL/(a))
+#define KHZ2PICOS(a) (1000000000UL/(a))
+
+struct fb_var_screeninfo {
+	__u32 xres;			/* visible resolution		*/
+	__u32 yres;
+	__u32 xres_virtual;		/* virtual resolution		*/
+	__u32 yres_virtual;
+	__u32 xoffset;			/* offset from virtual to visible */
+	__u32 yoffset;			/* resolution			*/
+
+	__u32 bits_per_pixel;		/* guess what			*/
+	__u32 grayscale;		/* 0 = color, 1 = grayscale,	*/
+					/* >1 = FOURCC			*/
+	struct fb_bitfield red;		/* bitfield in fb mem if true color, */
+	struct fb_bitfield green;	/* else only length is significant */
+	struct fb_bitfield blue;
+	struct fb_bitfield transp;	/* transparency			*/	
+
+	__u32 nonstd;			/* != 0 Non standard pixel format */
+
+	__u32 activate;			/* see FB_ACTIVATE_*		*/
+
+	__u32 height;			/* height of picture in mm    */
+	__u32 width;			/* width of picture in mm     */
+
+	__u32 accel_flags;		/* (OBSOLETE) see fb_info.flags */
+
+	/* Timing: All values in pixclocks, except pixclock (of course) */
+	__u32 pixclock;			/* pixel clock in ps (pico seconds) */
+	__u32 left_margin;		/* time from sync to picture	*/
+	__u32 right_margin;		/* time from picture to sync	*/
+	__u32 upper_margin;		/* time from sync to picture	*/
+	__u32 lower_margin;
+	__u32 hsync_len;		/* length of horizontal sync	*/
+	__u32 vsync_len;		/* length of vertical sync	*/
+	__u32 sync;			/* see FB_SYNC_*		*/
+	__u32 vmode;			/* see FB_VMODE_*		*/
+	__u32 rotate;			/* angle we rotate counter clockwise */
+	__u32 colorspace;		/* colorspace for FOURCC-based modes */
+	__u32 reserved[4];		/* Reserved for future compatibility */
+};
+
+struct fb_cmap {
+	__u32 start;			/* First entry	*/
+	__u32 len;			/* Number of entries */
+	__u16 *red;			/* Red values	*/
+	__u16 *green;
+	__u16 *blue;
+	__u16 *transp;			/* transparency, can be NULL */
+};
+
+struct fb_con2fbmap {
+	__u32 console;
+	__u32 framebuffer;
+};
+
+/* VESA Blanking Levels */
+#define VESA_NO_BLANKING        0
+#define VESA_VSYNC_SUSPEND      1
+#define VESA_HSYNC_SUSPEND      2
+#define VESA_POWERDOWN          3
+
+
+enum {
+	/* screen: unblanked, hsync: on,  vsync: on */
+	FB_BLANK_UNBLANK       = VESA_NO_BLANKING,
+
+	/* screen: blanked,   hsync: on,  vsync: on */
+	FB_BLANK_NORMAL        = VESA_NO_BLANKING + 1,
+
+	/* screen: blanked,   hsync: on,  vsync: off */
+	FB_BLANK_VSYNC_SUSPEND = VESA_VSYNC_SUSPEND + 1,
+
+	/* screen: blanked,   hsync: off, vsync: on */
+	FB_BLANK_HSYNC_SUSPEND = VESA_HSYNC_SUSPEND + 1,
+
+	/* screen: blanked,   hsync: off, vsync: off */
+	FB_BLANK_POWERDOWN     = VESA_POWERDOWN + 1
+};
+
+#define FB_VBLANK_VBLANKING	0x001	/* currently in a vertical blank */
+#define FB_VBLANK_HBLANKING	0x002	/* currently in a horizontal blank */
+#define FB_VBLANK_HAVE_VBLANK	0x004	/* vertical blanks can be detected */
+#define FB_VBLANK_HAVE_HBLANK	0x008	/* horizontal blanks can be detected */
+#define FB_VBLANK_HAVE_COUNT	0x010	/* global retrace counter is available */
+#define FB_VBLANK_HAVE_VCOUNT	0x020	/* the vcount field is valid */
+#define FB_VBLANK_HAVE_HCOUNT	0x040	/* the hcount field is valid */
+#define FB_VBLANK_VSYNCING	0x080	/* currently in a vsync */
+#define FB_VBLANK_HAVE_VSYNC	0x100	/* verical syncs can be detected */
+
+struct fb_vblank {
+	__u32 flags;			/* FB_VBLANK flags */
+	__u32 count;			/* counter of retraces since boot */
+	__u32 vcount;			/* current scanline position */
+	__u32 hcount;			/* current scandot position */
+	__u32 reserved[4];		/* reserved for future compatibility */
+};
+
+/* Internal HW accel */
+#define ROP_COPY 0
+#define ROP_XOR  1
+
+struct fb_copyarea {
+	__u32 dx;
+	__u32 dy;
+	__u32 width;
+	__u32 height;
+	__u32 sx;
+	__u32 sy;
+};
+
+struct fb_fillrect {
+	__u32 dx;	/* screen-relative */
+	__u32 dy;
+	__u32 width;
+	__u32 height;
+	__u32 color;
+	__u32 rop;
+};
+
+struct fb_image {
+	__u32 dx;		/* Where to place image */
+	__u32 dy;
+	__u32 width;		/* Size of image */
+	__u32 height;
+	__u32 fg_color;		/* Only used when a mono bitmap */
+	__u32 bg_color;
+	__u8  depth;		/* Depth of the image */
+	const char *data;	/* Pointer to image data */
+	struct fb_cmap cmap;	/* color map info */
+};
+
+/*
+ * hardware cursor control
+ */
+
+#define FB_CUR_SETIMAGE 0x01
+#define FB_CUR_SETPOS   0x02
+#define FB_CUR_SETHOT   0x04
+#define FB_CUR_SETCMAP  0x08
+#define FB_CUR_SETSHAPE 0x10
+#define FB_CUR_SETSIZE	0x20
+#define FB_CUR_SETALL   0xFF
+
+struct fbcurpos {
+	__u16 x, y;
+};
+
+struct fb_cursor {
+	__u16 set;		/* what to set */
+	__u16 enable;		/* cursor on/off */
+	__u16 rop;		/* bitop operation */
+	const char *mask;	/* cursor mask bits */
+	struct fbcurpos hot;	/* cursor hot spot */
+	struct fb_image	image;	/* Cursor image */
+};
+
+#ifdef CONFIG_FB_BACKLIGHT
+/* Settings for the generic backlight code */
+#define FB_BACKLIGHT_LEVELS	128
+#define FB_BACKLIGHT_MAX	0xFF
+#endif
+
+
+#endif /* _UAPI_LINUX_FB_H */
diff --git a/include/uapi/linux/fcntl.h b/include/uapi/linux/fcntl.h
new file mode 100644
index 00000000000..074b886c6be
--- /dev/null
+++ b/include/uapi/linux/fcntl.h
@@ -0,0 +1,52 @@
+#ifndef _UAPI_LINUX_FCNTL_H
+#define _UAPI_LINUX_FCNTL_H
+
+#include <asm/fcntl.h>
+
+#define F_SETLEASE	(F_LINUX_SPECIFIC_BASE + 0)
+#define F_GETLEASE	(F_LINUX_SPECIFIC_BASE + 1)
+
+/*
+ * Cancel a blocking posix lock; internal use only until we expose an
+ * asynchronous lock api to userspace:
+ */
+#define F_CANCELLK	(F_LINUX_SPECIFIC_BASE + 5)
+
+/* Create a file descriptor with FD_CLOEXEC set. */
+#define F_DUPFD_CLOEXEC	(F_LINUX_SPECIFIC_BASE + 6)
+
+/*
+ * Request nofications on a directory.
+ * See below for events that may be notified.
+ */
+#define F_NOTIFY	(F_LINUX_SPECIFIC_BASE+2)
+
+/*
+ * Set and get of pipe page size array
+ */
+#define F_SETPIPE_SZ	(F_LINUX_SPECIFIC_BASE + 7)
+#define F_GETPIPE_SZ	(F_LINUX_SPECIFIC_BASE + 8)
+
+/*
+ * Types of directory notifications that may be requested.
+ */
+#define DN_ACCESS	0x00000001	/* File accessed */
+#define DN_MODIFY	0x00000002	/* File modified */
+#define DN_CREATE	0x00000004	/* File created */
+#define DN_DELETE	0x00000008	/* File removed */
+#define DN_RENAME	0x00000010	/* File renamed */
+#define DN_ATTRIB	0x00000020	/* File changed attibutes */
+#define DN_MULTISHOT	0x80000000	/* Don't remove notifier */
+
+#define AT_FDCWD		-100    /* Special value used to indicate
+                                           openat should use the current
+                                           working directory. */
+#define AT_SYMLINK_NOFOLLOW	0x100   /* Do not follow symbolic links.  */
+#define AT_REMOVEDIR		0x200   /* Remove directory instead of
+                                           unlinking file.  */
+#define AT_SYMLINK_FOLLOW	0x400   /* Follow symbolic links.  */
+#define AT_NO_AUTOMOUNT		0x800	/* Suppress terminal automount traversal */
+#define AT_EMPTY_PATH		0x1000	/* Allow empty relative pathname */
+
+
+#endif /* _UAPI_LINUX_FCNTL_H */
diff --git a/include/uapi/linux/fd.h b/include/uapi/linux/fd.h
new file mode 100644
index 00000000000..f1f3dd5981b
--- /dev/null
+++ b/include/uapi/linux/fd.h
@@ -0,0 +1,382 @@
+#ifndef _UAPI_LINUX_FD_H
+#define _UAPI_LINUX_FD_H
+
+#include <linux/ioctl.h>
+#include <linux/compiler.h>
+
+/* New file layout: Now the ioctl definitions immediately follow the
+ * definitions of the structures that they use */
+
+/*
+ * Geometry
+ */
+struct floppy_struct {
+	unsigned int	size,		/* nr of sectors total */
+			sect,		/* sectors per track */
+			head,		/* nr of heads */
+			track,		/* nr of tracks */
+			stretch;	/* bit 0 !=0 means double track steps */
+					/* bit 1 != 0 means swap sides */
+					/* bits 2..9 give the first sector */
+					/*  number (the LSB is flipped) */
+#define FD_STRETCH 1
+#define FD_SWAPSIDES 2
+#define FD_ZEROBASED 4
+#define FD_SECTBASEMASK 0x3FC
+#define FD_MKSECTBASE(s) (((s) ^ 1) << 2)
+#define FD_SECTBASE(floppy) ((((floppy)->stretch & FD_SECTBASEMASK) >> 2) ^ 1)
+
+	unsigned char	gap,		/* gap1 size */
+
+			rate,		/* data rate. |= 0x40 for perpendicular */
+#define FD_2M 0x4
+#define FD_SIZECODEMASK 0x38
+#define FD_SIZECODE(floppy) (((((floppy)->rate&FD_SIZECODEMASK)>> 3)+ 2) %8)
+#define FD_SECTSIZE(floppy) ( (floppy)->rate & FD_2M ? \
+			     512 : 128 << FD_SIZECODE(floppy) )
+#define FD_PERP 0x40
+
+			spec1,		/* stepping rate, head unload time */
+			fmt_gap;	/* gap2 size */
+	const char	* name; /* used only for predefined formats */
+};
+
+
+/* commands needing write access have 0x40 set */
+/* commands needing super user access have 0x80 set */
+
+#define FDCLRPRM _IO(2, 0x41)
+/* clear user-defined parameters */
+
+#define FDSETPRM _IOW(2, 0x42, struct floppy_struct) 
+#define FDSETMEDIAPRM FDSETPRM
+/* set user-defined parameters for current media */
+
+#define FDDEFPRM _IOW(2, 0x43, struct floppy_struct) 
+#define FDGETPRM _IOR(2, 0x04, struct floppy_struct)
+#define FDDEFMEDIAPRM FDDEFPRM
+#define FDGETMEDIAPRM FDGETPRM
+/* set/get disk parameters */
+
+
+#define	FDMSGON  _IO(2,0x45)
+#define	FDMSGOFF _IO(2,0x46)
+/* issue/don't issue kernel messages on media type change */
+
+
+/* 
+ * Formatting (obsolete)
+ */
+#define FD_FILL_BYTE 0xF6 /* format fill byte. */
+
+struct format_descr {
+	unsigned int device,head,track;
+};
+
+#define FDFMTBEG _IO(2,0x47)
+/* begin formatting a disk */
+#define	FDFMTTRK _IOW(2,0x48, struct format_descr)
+/* format the specified track */
+#define FDFMTEND _IO(2,0x49)
+/* end formatting a disk */
+
+
+/*
+ * Error thresholds
+ */
+struct floppy_max_errors {
+	unsigned int
+	  abort,      /* number of errors to be reached before aborting */
+	  read_track, /* maximal number of errors permitted to read an
+		       * entire track at once */
+	  reset,      /* maximal number of errors before a reset is tried */
+	  recal,      /* maximal number of errors before a recalibrate is
+		       * tried */
+
+	  /*
+	   * Threshold for reporting FDC errors to the console.
+	   * Setting this to zero may flood your screen when using
+	   * ultra cheap floppies ;-)
+	   */
+	  reporting;
+
+};
+
+#define FDSETEMSGTRESH	_IO(2,0x4a)
+/* set fdc error reporting threshold */
+
+#define FDFLUSH  _IO(2,0x4b)
+/* flush buffers for media; either for verifying media, or for
+ * handling a media change without closing the file descriptor */
+
+#define FDSETMAXERRS _IOW(2, 0x4c, struct floppy_max_errors)
+#define FDGETMAXERRS _IOR(2, 0x0e, struct floppy_max_errors)
+/* set/get abortion and read_track threshold. See also floppy_drive_params
+ * structure */
+
+
+typedef char floppy_drive_name[16];
+#define FDGETDRVTYP _IOR(2, 0x0f, floppy_drive_name)
+/* get drive type: 5 1/4 or 3 1/2 */
+
+
+/*
+ * Drive parameters (user modifiable)
+ */
+struct floppy_drive_params {
+	signed char cmos;		/* CMOS type */
+	
+	/* Spec2 is (HLD<<1 | ND), where HLD is head load time (1=2ms, 2=4 ms 
+	 * etc) and ND is set means no DMA. Hardcoded to 6 (HLD=6ms, use DMA).
+	 */
+	unsigned long max_dtr;		/* Step rate, usec */
+	unsigned long hlt;     		/* Head load/settle time, msec */
+	unsigned long hut;     		/* Head unload time (remnant of 
+					 * 8" drives) */
+	unsigned long srt;     		/* Step rate, usec */
+
+	unsigned long spinup;		/* time needed for spinup (expressed
+					 * in jiffies) */
+	unsigned long spindown;		/* timeout needed for spindown */
+	unsigned char spindown_offset;	/* decides in which position the disk
+					 * will stop */
+	unsigned char select_delay;	/* delay to wait after select */
+	unsigned char rps;		/* rotations per second */
+	unsigned char tracks;		/* maximum number of tracks */
+	unsigned long timeout;		/* timeout for interrupt requests */
+	
+	unsigned char interleave_sect;	/* if there are more sectors, use 
+					 * interleave */
+	
+	struct floppy_max_errors max_errors;
+	
+	char flags;			/* various flags, including ftd_msg */
+/*
+ * Announce successful media type detection and media information loss after
+ * disk changes.
+ * Also used to enable/disable printing of overrun warnings.
+ */
+
+#define FTD_MSG 0x10
+#define FD_BROKEN_DCL 0x20
+#define FD_DEBUG 0x02
+#define FD_SILENT_DCL_CLEAR 0x4
+#define FD_INVERTED_DCL 0x80 /* must be 0x80, because of hardware 
+				considerations */
+
+	char read_track;		/* use readtrack during probing? */
+
+/*
+ * Auto-detection. Each drive type has eight formats which are
+ * used in succession to try to read the disk. If the FDC cannot lock onto
+ * the disk, the next format is tried. This uses the variable 'probing'.
+ */
+	short autodetect[8];		/* autodetected formats */
+	
+	int checkfreq; /* how often should the drive be checked for disk 
+			* changes */
+	int native_format; /* native format of this drive */
+};
+
+enum {
+	FD_NEED_TWADDLE_BIT,	/* more magic */
+	FD_VERIFY_BIT,		/* inquire for write protection */
+	FD_DISK_NEWCHANGE_BIT,	/* change detected, and no action undertaken yet
+				 * to clear media change status */
+	FD_UNUSED_BIT,
+	FD_DISK_CHANGED_BIT,	/* disk has been changed since last i/o */
+	FD_DISK_WRITABLE_BIT	/* disk is writable */
+};
+
+#define FDSETDRVPRM _IOW(2, 0x90, struct floppy_drive_params)
+#define FDGETDRVPRM _IOR(2, 0x11, struct floppy_drive_params)
+/* set/get drive parameters */
+
+
+/*
+ * Current drive state (not directly modifiable by user, readonly)
+ */
+struct floppy_drive_struct {
+	unsigned long flags;
+/* values for these flags */
+#define FD_NEED_TWADDLE (1 << FD_NEED_TWADDLE_BIT)
+#define FD_VERIFY (1 << FD_VERIFY_BIT)
+#define FD_DISK_NEWCHANGE (1 << FD_DISK_NEWCHANGE_BIT)
+#define FD_DISK_CHANGED (1 << FD_DISK_CHANGED_BIT)
+#define FD_DISK_WRITABLE (1 << FD_DISK_WRITABLE_BIT)
+
+	unsigned long spinup_date;
+	unsigned long select_date;
+	unsigned long first_read_date;
+	short probed_format;
+	short track; /* current track */
+	short maxblock; /* id of highest block read */
+	short maxtrack; /* id of highest half track read */
+	int generation; /* how many diskchanges? */
+
+/*
+ * (User-provided) media information is _not_ discarded after a media change
+ * if the corresponding keep_data flag is non-zero. Positive values are
+ * decremented after each probe.
+ */
+	int keep_data;
+	
+	/* Prevent "aliased" accesses. */
+	int fd_ref;
+	int fd_device;
+	unsigned long last_checked; /* when was the drive last checked for a disk 
+			   * change? */
+	
+	char *dmabuf;
+	int bufblocks;
+};
+
+#define FDGETDRVSTAT _IOR(2, 0x12, struct floppy_drive_struct)
+#define FDPOLLDRVSTAT _IOR(2, 0x13, struct floppy_drive_struct)
+/* get drive state: GET returns the cached state, POLL polls for new state */
+
+
+/*
+ * reset FDC
+ */
+enum reset_mode {
+	FD_RESET_IF_NEEDED,	/* reset only if the reset flags is set */
+	FD_RESET_IF_RAWCMD,	/* obsolete */
+	FD_RESET_ALWAYS		/* reset always */
+};
+#define FDRESET _IO(2, 0x54)
+
+
+/*
+ * FDC state
+ */
+struct floppy_fdc_state {	
+	int spec1;		/* spec1 value last used */
+	int spec2;		/* spec2 value last used */
+	int dtr;
+	unsigned char version;	/* FDC version code */
+	unsigned char dor;
+	unsigned long address;	/* io address */
+	unsigned int rawcmd:2;
+	unsigned int reset:1;
+	unsigned int need_configure:1;
+	unsigned int perp_mode:2;
+	unsigned int has_fifo:1;
+	unsigned int driver_version;	/* version code for floppy driver */
+#define FD_DRIVER_VERSION 0x100
+/* user programs using the floppy API should use floppy_fdc_state to
+ * get the version number of the floppy driver that they are running
+ * on. If this version number is bigger than the one compiled into the
+ * user program (the FD_DRIVER_VERSION define), it should be prepared
+ * to bigger structures
+ */
+
+	unsigned char track[4];
+	/* Position of the heads of the 4 units attached to this FDC,
+	 * as stored on the FDC. In the future, the position as stored
+	 * on the FDC might not agree with the actual physical
+	 * position of these drive heads. By allowing such
+	 * disagreement, it will be possible to reset the FDC without
+	 * incurring the expensive cost of repositioning all heads.
+	 * Right now, these positions are hard wired to 0. */
+
+};
+
+#define FDGETFDCSTAT _IOR(2, 0x15, struct floppy_fdc_state)
+
+
+/*
+ * Asynchronous Write error tracking
+ */
+struct floppy_write_errors {
+	/* Write error logging.
+	 *
+	 * These fields can be cleared with the FDWERRORCLR ioctl.
+	 * Only writes that were attempted but failed due to a physical media
+	 * error are logged.  write(2) calls that fail and return an error code
+	 * to the user process are not counted.
+	 */
+
+	unsigned int write_errors;  /* number of physical write errors 
+				     * encountered */
+	
+	/* position of first and last write errors */
+	unsigned long first_error_sector;
+	int           first_error_generation;
+	unsigned long last_error_sector;
+	int           last_error_generation;
+	
+	unsigned int badness; /* highest retry count for a read or write 
+			       * operation */
+};
+
+#define FDWERRORCLR  _IO(2, 0x56)
+/* clear write error and badness information */
+#define FDWERRORGET  _IOR(2, 0x17, struct floppy_write_errors)
+/* get write error and badness information */
+
+
+/*
+ * Raw commands
+ */
+/* new interface flag: now we can do them in batches */
+#define FDHAVEBATCHEDRAWCMD
+
+struct floppy_raw_cmd {
+	unsigned int flags;
+#define FD_RAW_READ 1
+#define FD_RAW_WRITE 2
+#define FD_RAW_NO_MOTOR 4
+#define FD_RAW_DISK_CHANGE 4 /* out: disk change flag was set */
+#define FD_RAW_INTR 8    /* wait for an interrupt */
+#define FD_RAW_SPIN 0x10 /* spin up the disk for this command */
+#define FD_RAW_NO_MOTOR_AFTER 0x20 /* switch the motor off after command 
+				    * completion */
+#define FD_RAW_NEED_DISK 0x40  /* this command needs a disk to be present */
+#define FD_RAW_NEED_SEEK 0x80  /* this command uses an implied seek (soft) */
+
+/* more "in" flags */
+#define FD_RAW_MORE 0x100  /* more records follow */
+#define FD_RAW_STOP_IF_FAILURE 0x200 /* stop if we encounter a failure */
+#define FD_RAW_STOP_IF_SUCCESS 0x400 /* stop if command successful */
+#define FD_RAW_SOFTFAILURE 0x800 /* consider the return value for failure
+				  * detection too */
+
+/* more "out" flags */
+#define FD_RAW_FAILURE 0x10000 /* command sent to fdc, fdc returned error */
+#define FD_RAW_HARDFAILURE 0x20000 /* fdc had to be reset, or timed out */
+
+	void __user *data;
+	char *kernel_data; /* location of data buffer in the kernel */
+	struct floppy_raw_cmd *next; /* used for chaining of raw cmd's 
+				      * within the kernel */
+	long length; /* in: length of dma transfer. out: remaining bytes */
+	long phys_length; /* physical length, if different from dma length */
+	int buffer_length; /* length of allocated buffer */
+
+	unsigned char rate;
+	unsigned char cmd_count;
+	unsigned char cmd[16];
+	unsigned char reply_count;
+	unsigned char reply[16];
+	int track;
+	int resultcode;
+
+	int reserved1;
+	int reserved2;
+};
+
+#define FDRAWCMD _IO(2, 0x58)
+/* send a raw command to the fdc. Structure size not included, because of
+ * batches */
+
+#define FDTWADDLE _IO(2, 0x59)
+/* flicker motor-on bit before reading a sector. Experimental */
+
+
+#define FDEJECT _IO(2, 0x5a)
+/* eject the disk */
+
+
+
+#endif /* _UAPI_LINUX_FD_H */
diff --git a/include/uapi/linux/fdreg.h b/include/uapi/linux/fdreg.h
new file mode 100644
index 00000000000..61ce6416900
--- /dev/null
+++ b/include/uapi/linux/fdreg.h
@@ -0,0 +1,137 @@
+#ifndef _LINUX_FDREG_H
+#define _LINUX_FDREG_H
+/*
+ * This file contains some defines for the floppy disk controller.
+ * Various sources. Mostly "IBM Microcomputers: A Programmers
+ * Handbook", Sanches and Canton.
+ */
+
+#ifdef FDPATCHES
+#define FD_IOPORT fdc_state[fdc].address
+#else
+/* It would be a lot saner just to force fdc_state[fdc].address to always
+   be set ! FIXME */
+#define FD_IOPORT 0x3f0
+#endif
+
+/* Fd controller regs. S&C, about page 340 */
+#define FD_STATUS	(4 + FD_IOPORT )
+#define FD_DATA		(5 + FD_IOPORT )
+
+/* Digital Output Register */
+#define FD_DOR		(2 + FD_IOPORT )
+
+/* Digital Input Register (read) */
+#define FD_DIR		(7 + FD_IOPORT )
+
+/* Diskette Control Register (write)*/
+#define FD_DCR		(7 + FD_IOPORT )
+
+/* Bits of main status register */
+#define STATUS_BUSYMASK	0x0F		/* drive busy mask */
+#define STATUS_BUSY	0x10		/* FDC busy */
+#define STATUS_DMA	0x20		/* 0- DMA mode */
+#define STATUS_DIR	0x40		/* 0- cpu->fdc */
+#define STATUS_READY	0x80		/* Data reg ready */
+
+/* Bits of FD_ST0 */
+#define ST0_DS		0x03		/* drive select mask */
+#define ST0_HA		0x04		/* Head (Address) */
+#define ST0_NR		0x08		/* Not Ready */
+#define ST0_ECE		0x10		/* Equipment check error */
+#define ST0_SE		0x20		/* Seek end */
+#define ST0_INTR	0xC0		/* Interrupt code mask */
+
+/* Bits of FD_ST1 */
+#define ST1_MAM		0x01		/* Missing Address Mark */
+#define ST1_WP		0x02		/* Write Protect */
+#define ST1_ND		0x04		/* No Data - unreadable */
+#define ST1_OR		0x10		/* OverRun */
+#define ST1_CRC		0x20		/* CRC error in data or addr */
+#define ST1_EOC		0x80		/* End Of Cylinder */
+
+/* Bits of FD_ST2 */
+#define ST2_MAM		0x01		/* Missing Address Mark (again) */
+#define ST2_BC		0x02		/* Bad Cylinder */
+#define ST2_SNS		0x04		/* Scan Not Satisfied */
+#define ST2_SEH		0x08		/* Scan Equal Hit */
+#define ST2_WC		0x10		/* Wrong Cylinder */
+#define ST2_CRC		0x20		/* CRC error in data field */
+#define ST2_CM		0x40		/* Control Mark = deleted */
+
+/* Bits of FD_ST3 */
+#define ST3_HA		0x04		/* Head (Address) */
+#define ST3_DS		0x08		/* drive is double-sided */
+#define ST3_TZ		0x10		/* Track Zero signal (1=track 0) */
+#define ST3_RY		0x20		/* drive is ready */
+#define ST3_WP		0x40		/* Write Protect */
+#define ST3_FT		0x80		/* Drive Fault */
+
+/* Values for FD_COMMAND */
+#define FD_RECALIBRATE		0x07	/* move to track 0 */
+#define FD_SEEK			0x0F	/* seek track */
+#define FD_READ			0xE6	/* read with MT, MFM, SKip deleted */
+#define FD_WRITE		0xC5	/* write with MT, MFM */
+#define FD_SENSEI		0x08	/* Sense Interrupt Status */
+#define FD_SPECIFY		0x03	/* specify HUT etc */
+#define FD_FORMAT		0x4D	/* format one track */
+#define FD_VERSION		0x10	/* get version code */
+#define FD_CONFIGURE		0x13	/* configure FIFO operation */
+#define FD_PERPENDICULAR	0x12	/* perpendicular r/w mode */
+#define FD_GETSTATUS		0x04	/* read ST3 */
+#define FD_DUMPREGS		0x0E	/* dump the contents of the fdc regs */
+#define FD_READID		0xEA	/* prints the header of a sector */
+#define FD_UNLOCK		0x14	/* Fifo config unlock */
+#define FD_LOCK			0x94	/* Fifo config lock */
+#define FD_RSEEK_OUT		0x8f	/* seek out (i.e. to lower tracks) */
+#define FD_RSEEK_IN		0xcf	/* seek in (i.e. to higher tracks) */
+
+/* the following commands are new in the 82078. They are not used in the
+ * floppy driver, except the first three. These commands may be useful for apps
+ * which use the FDRAWCMD interface. For doc, get the 82078 spec sheets at
+ * http://www.intel.com/design/archives/periphrl/docs/29046803.htm */
+
+#define FD_PARTID		0x18	/* part id ("extended" version cmd) */
+#define FD_SAVE			0x2e	/* save fdc regs for later restore */
+#define FD_DRIVESPEC		0x8e	/* drive specification: Access to the
+					 * 2 Mbps data transfer rate for tape
+					 * drives */
+
+#define FD_RESTORE		0x4e    /* later restore */
+#define FD_POWERDOWN		0x27	/* configure FDC's powersave features */
+#define FD_FORMAT_N_WRITE	0xef    /* format and write in one go. */
+#define FD_OPTION		0x33	/* ISO format (which is a clean way to
+					 * pack more sectors on a track) */
+
+/* DMA commands */
+#define DMA_READ	0x46
+#define DMA_WRITE	0x4A
+
+/* FDC version return types */
+#define FDC_NONE	0x00
+#define FDC_UNKNOWN	0x10	/* DO NOT USE THIS TYPE EXCEPT IF IDENTIFICATION
+				   FAILS EARLY */
+#define FDC_8272A	0x20	/* Intel 8272a, NEC 765 */
+#define FDC_765ED	0x30	/* Non-Intel 1MB-compatible FDC, can't detect */
+#define FDC_82072	0x40	/* Intel 82072; 8272a + FIFO + DUMPREGS */
+#define FDC_82072A	0x45	/* 82072A (on Sparcs) */
+#define FDC_82077_ORIG	0x51	/* Original version of 82077AA, sans LOCK */
+#define FDC_82077	0x52	/* 82077AA-1 */
+#define FDC_82078_UNKN	0x5f	/* Unknown 82078 variant */
+#define FDC_82078	0x60	/* 44pin 82078 or 64pin 82078SL */
+#define FDC_82078_1	0x61	/* 82078-1 (2Mbps fdc) */
+#define FDC_S82078B	0x62	/* S82078B (first seen on Adaptec AVA-2825 VLB
+				 * SCSI/EIDE/Floppy controller) */
+#define FDC_87306	0x63	/* National Semiconductor PC 87306 */
+
+/*
+ * Beware: the fdc type list is roughly sorted by increasing features.
+ * Presence of features is tested by comparing the FDC version id with the
+ * "oldest" version that has the needed feature.
+ * If during FDC detection, an obscure test fails late in the sequence, don't
+ * assign FDC_UNKNOWN. Else the FDC will be treated as a dumb 8272a, or worse.
+ * This is especially true if the tests are unneeded.
+ */
+
+#define FD_RESET_DELAY 20
+#endif
diff --git a/include/uapi/linux/fib_rules.h b/include/uapi/linux/fib_rules.h
new file mode 100644
index 00000000000..51da65b68b8
--- /dev/null
+++ b/include/uapi/linux/fib_rules.h
@@ -0,0 +1,72 @@
+#ifndef __LINUX_FIB_RULES_H
+#define __LINUX_FIB_RULES_H
+
+#include <linux/types.h>
+#include <linux/rtnetlink.h>
+
+/* rule is permanent, and cannot be deleted */
+#define FIB_RULE_PERMANENT	0x00000001
+#define FIB_RULE_INVERT		0x00000002
+#define FIB_RULE_UNRESOLVED	0x00000004
+#define FIB_RULE_IIF_DETACHED	0x00000008
+#define FIB_RULE_DEV_DETACHED	FIB_RULE_IIF_DETACHED
+#define FIB_RULE_OIF_DETACHED	0x00000010
+
+/* try to find source address in routing lookups */
+#define FIB_RULE_FIND_SADDR	0x00010000
+
+struct fib_rule_hdr {
+	__u8		family;
+	__u8		dst_len;
+	__u8		src_len;
+	__u8		tos;
+
+	__u8		table;
+	__u8		res1;	/* reserved */
+	__u8		res2;	/* reserved */
+	__u8		action;
+
+	__u32		flags;
+};
+
+enum {
+	FRA_UNSPEC,
+	FRA_DST,	/* destination address */
+	FRA_SRC,	/* source address */
+	FRA_IIFNAME,	/* interface name */
+#define FRA_IFNAME	FRA_IIFNAME
+	FRA_GOTO,	/* target to jump to (FR_ACT_GOTO) */
+	FRA_UNUSED2,
+	FRA_PRIORITY,	/* priority/preference */
+	FRA_UNUSED3,
+	FRA_UNUSED4,
+	FRA_UNUSED5,
+	FRA_FWMARK,	/* mark */
+	FRA_FLOW,	/* flow/class id */
+	FRA_UNUSED6,
+	FRA_UNUSED7,
+	FRA_UNUSED8,
+	FRA_TABLE,	/* Extended table id */
+	FRA_FWMASK,	/* mask for netfilter mark */
+	FRA_OIFNAME,
+	__FRA_MAX
+};
+
+#define FRA_MAX (__FRA_MAX - 1)
+
+enum {
+	FR_ACT_UNSPEC,
+	FR_ACT_TO_TBL,		/* Pass to fixed table */
+	FR_ACT_GOTO,		/* Jump to another rule */
+	FR_ACT_NOP,		/* No operation */
+	FR_ACT_RES3,
+	FR_ACT_RES4,
+	FR_ACT_BLACKHOLE,	/* Drop without notification */
+	FR_ACT_UNREACHABLE,	/* Drop with ENETUNREACH */
+	FR_ACT_PROHIBIT,	/* Drop with EACCES */
+	__FR_ACT_MAX,
+};
+
+#define FR_ACT_MAX (__FR_ACT_MAX - 1)
+
+#endif
diff --git a/include/uapi/linux/fiemap.h b/include/uapi/linux/fiemap.h
new file mode 100644
index 00000000000..d830747f5c0
--- /dev/null
+++ b/include/uapi/linux/fiemap.h
@@ -0,0 +1,68 @@
+/*
+ * FS_IOC_FIEMAP ioctl infrastructure.
+ *
+ * Some portions copyright (C) 2007 Cluster File Systems, Inc
+ *
+ * Authors: Mark Fasheh <mfasheh@suse.com>
+ *          Kalpak Shah <kalpak.shah@sun.com>
+ *          Andreas Dilger <adilger@sun.com>
+ */
+
+#ifndef _LINUX_FIEMAP_H
+#define _LINUX_FIEMAP_H
+
+#include <linux/types.h>
+
+struct fiemap_extent {
+	__u64 fe_logical;  /* logical offset in bytes for the start of
+			    * the extent from the beginning of the file */
+	__u64 fe_physical; /* physical offset in bytes for the start
+			    * of the extent from the beginning of the disk */
+	__u64 fe_length;   /* length in bytes for this extent */
+	__u64 fe_reserved64[2];
+	__u32 fe_flags;    /* FIEMAP_EXTENT_* flags for this extent */
+	__u32 fe_reserved[3];
+};
+
+struct fiemap {
+	__u64 fm_start;		/* logical offset (inclusive) at
+				 * which to start mapping (in) */
+	__u64 fm_length;	/* logical length of mapping which
+				 * userspace wants (in) */
+	__u32 fm_flags;		/* FIEMAP_FLAG_* flags for request (in/out) */
+	__u32 fm_mapped_extents;/* number of extents that were mapped (out) */
+	__u32 fm_extent_count;  /* size of fm_extents array (in) */
+	__u32 fm_reserved;
+	struct fiemap_extent fm_extents[0]; /* array of mapped extents (out) */
+};
+
+#define FIEMAP_MAX_OFFSET	(~0ULL)
+
+#define FIEMAP_FLAG_SYNC	0x00000001 /* sync file data before map */
+#define FIEMAP_FLAG_XATTR	0x00000002 /* map extended attribute tree */
+
+#define FIEMAP_FLAGS_COMPAT	(FIEMAP_FLAG_SYNC | FIEMAP_FLAG_XATTR)
+
+#define FIEMAP_EXTENT_LAST		0x00000001 /* Last extent in file. */
+#define FIEMAP_EXTENT_UNKNOWN		0x00000002 /* Data location unknown. */
+#define FIEMAP_EXTENT_DELALLOC		0x00000004 /* Location still pending.
+						    * Sets EXTENT_UNKNOWN. */
+#define FIEMAP_EXTENT_ENCODED		0x00000008 /* Data can not be read
+						    * while fs is unmounted */
+#define FIEMAP_EXTENT_DATA_ENCRYPTED	0x00000080 /* Data is encrypted by fs.
+						    * Sets EXTENT_NO_BYPASS. */
+#define FIEMAP_EXTENT_NOT_ALIGNED	0x00000100 /* Extent offsets may not be
+						    * block aligned. */
+#define FIEMAP_EXTENT_DATA_INLINE	0x00000200 /* Data mixed with metadata.
+						    * Sets EXTENT_NOT_ALIGNED.*/
+#define FIEMAP_EXTENT_DATA_TAIL		0x00000400 /* Multiple files in block.
+						    * Sets EXTENT_NOT_ALIGNED.*/
+#define FIEMAP_EXTENT_UNWRITTEN		0x00000800 /* Space allocated, but
+						    * no data (i.e. zero). */
+#define FIEMAP_EXTENT_MERGED		0x00001000 /* File does not natively
+						    * support extents. Result
+						    * merged for efficiency. */
+#define FIEMAP_EXTENT_SHARED		0x00002000 /* Space shared with other
+						    * files. */
+
+#endif /* _LINUX_FIEMAP_H */
diff --git a/include/uapi/linux/filter.h b/include/uapi/linux/filter.h
new file mode 100644
index 00000000000..3d7922433ab
--- /dev/null
+++ b/include/uapi/linux/filter.h
@@ -0,0 +1,135 @@
+/*
+ * Linux Socket Filter Data Structures
+ */
+
+#ifndef _UAPI__LINUX_FILTER_H__
+#define _UAPI__LINUX_FILTER_H__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+
+/*
+ * Current version of the filter code architecture.
+ */
+#define BPF_MAJOR_VERSION 1
+#define BPF_MINOR_VERSION 1
+
+/*
+ *	Try and keep these values and structures similar to BSD, especially
+ *	the BPF code definitions which need to match so you can share filters
+ */
+ 
+struct sock_filter {	/* Filter block */
+	__u16	code;   /* Actual filter code */
+	__u8	jt;	/* Jump true */
+	__u8	jf;	/* Jump false */
+	__u32	k;      /* Generic multiuse field */
+};
+
+struct sock_fprog {	/* Required for SO_ATTACH_FILTER. */
+	unsigned short		len;	/* Number of filter blocks */
+	struct sock_filter __user *filter;
+};
+
+/*
+ * Instruction classes
+ */
+
+#define BPF_CLASS(code) ((code) & 0x07)
+#define         BPF_LD          0x00
+#define         BPF_LDX         0x01
+#define         BPF_ST          0x02
+#define         BPF_STX         0x03
+#define         BPF_ALU         0x04
+#define         BPF_JMP         0x05
+#define         BPF_RET         0x06
+#define         BPF_MISC        0x07
+
+/* ld/ldx fields */
+#define BPF_SIZE(code)  ((code) & 0x18)
+#define         BPF_W           0x00
+#define         BPF_H           0x08
+#define         BPF_B           0x10
+#define BPF_MODE(code)  ((code) & 0xe0)
+#define         BPF_IMM         0x00
+#define         BPF_ABS         0x20
+#define         BPF_IND         0x40
+#define         BPF_MEM         0x60
+#define         BPF_LEN         0x80
+#define         BPF_MSH         0xa0
+
+/* alu/jmp fields */
+#define BPF_OP(code)    ((code) & 0xf0)
+#define         BPF_ADD         0x00
+#define         BPF_SUB         0x10
+#define         BPF_MUL         0x20
+#define         BPF_DIV         0x30
+#define         BPF_OR          0x40
+#define         BPF_AND         0x50
+#define         BPF_LSH         0x60
+#define         BPF_RSH         0x70
+#define         BPF_NEG         0x80
+#define		BPF_MOD		0x90
+#define		BPF_XOR		0xa0
+
+#define         BPF_JA          0x00
+#define         BPF_JEQ         0x10
+#define         BPF_JGT         0x20
+#define         BPF_JGE         0x30
+#define         BPF_JSET        0x40
+#define BPF_SRC(code)   ((code) & 0x08)
+#define         BPF_K           0x00
+#define         BPF_X           0x08
+
+/* ret - BPF_K and BPF_X also apply */
+#define BPF_RVAL(code)  ((code) & 0x18)
+#define         BPF_A           0x10
+
+/* misc */
+#define BPF_MISCOP(code) ((code) & 0xf8)
+#define         BPF_TAX         0x00
+#define         BPF_TXA         0x80
+
+#ifndef BPF_MAXINSNS
+#define BPF_MAXINSNS 4096
+#endif
+
+/*
+ * Macros for filter block array initializers.
+ */
+#ifndef BPF_STMT
+#define BPF_STMT(code, k) { (unsigned short)(code), 0, 0, k }
+#endif
+#ifndef BPF_JUMP
+#define BPF_JUMP(code, k, jt, jf) { (unsigned short)(code), jt, jf, k }
+#endif
+
+/*
+ * Number of scratch memory words for: BPF_ST and BPF_STX
+ */
+#define BPF_MEMWORDS 16
+
+/* RATIONALE. Negative offsets are invalid in BPF.
+   We use them to reference ancillary data.
+   Unlike introduction new instructions, it does not break
+   existing compilers/optimizers.
+ */
+#define SKF_AD_OFF    (-0x1000)
+#define SKF_AD_PROTOCOL 0
+#define SKF_AD_PKTTYPE 	4
+#define SKF_AD_IFINDEX 	8
+#define SKF_AD_NLATTR	12
+#define SKF_AD_NLATTR_NEST	16
+#define SKF_AD_MARK 	20
+#define SKF_AD_QUEUE	24
+#define SKF_AD_HATYPE	28
+#define SKF_AD_RXHASH	32
+#define SKF_AD_CPU	36
+#define SKF_AD_ALU_XOR_X	40
+#define SKF_AD_MAX	44
+#define SKF_NET_OFF   (-0x100000)
+#define SKF_LL_OFF    (-0x200000)
+
+
+#endif /* _UAPI__LINUX_FILTER_H__ */
diff --git a/include/uapi/linux/firewire-cdev.h b/include/uapi/linux/firewire-cdev.h
new file mode 100644
index 00000000000..d5003695349
--- /dev/null
+++ b/include/uapi/linux/firewire-cdev.h
@@ -0,0 +1,1039 @@
+/*
+ * Char device interface.
+ *
+ * Copyright (C) 2005-2007  Kristian Hoegsberg <krh@bitplanet.net>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _LINUX_FIREWIRE_CDEV_H
+#define _LINUX_FIREWIRE_CDEV_H
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+#include <linux/firewire-constants.h>
+
+/* available since kernel version 2.6.22 */
+#define FW_CDEV_EVENT_BUS_RESET				0x00
+#define FW_CDEV_EVENT_RESPONSE				0x01
+#define FW_CDEV_EVENT_REQUEST				0x02
+#define FW_CDEV_EVENT_ISO_INTERRUPT			0x03
+
+/* available since kernel version 2.6.30 */
+#define FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED		0x04
+#define FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED		0x05
+
+/* available since kernel version 2.6.36 */
+#define FW_CDEV_EVENT_REQUEST2				0x06
+#define FW_CDEV_EVENT_PHY_PACKET_SENT			0x07
+#define FW_CDEV_EVENT_PHY_PACKET_RECEIVED		0x08
+#define FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL	0x09
+
+/**
+ * struct fw_cdev_event_common - Common part of all fw_cdev_event_ types
+ * @closure:	For arbitrary use by userspace
+ * @type:	Discriminates the fw_cdev_event_ types
+ *
+ * This struct may be used to access generic members of all fw_cdev_event_
+ * types regardless of the specific type.
+ *
+ * Data passed in the @closure field for a request will be returned in the
+ * corresponding event.  It is big enough to hold a pointer on all platforms.
+ * The ioctl used to set @closure depends on the @type of event.
+ */
+struct fw_cdev_event_common {
+	__u64 closure;
+	__u32 type;
+};
+
+/**
+ * struct fw_cdev_event_bus_reset - Sent when a bus reset occurred
+ * @closure:	See &fw_cdev_event_common; set by %FW_CDEV_IOC_GET_INFO ioctl
+ * @type:	See &fw_cdev_event_common; always %FW_CDEV_EVENT_BUS_RESET
+ * @node_id:       New node ID of this node
+ * @local_node_id: Node ID of the local node, i.e. of the controller
+ * @bm_node_id:    Node ID of the bus manager
+ * @irm_node_id:   Node ID of the iso resource manager
+ * @root_node_id:  Node ID of the root node
+ * @generation:    New bus generation
+ *
+ * This event is sent when the bus the device belongs to goes through a bus
+ * reset.  It provides information about the new bus configuration, such as
+ * new node ID for this device, new root ID, and others.
+ *
+ * If @bm_node_id is 0xffff right after bus reset it can be reread by an
+ * %FW_CDEV_IOC_GET_INFO ioctl after bus manager selection was finished.
+ * Kernels with ABI version < 4 do not set @bm_node_id.
+ */
+struct fw_cdev_event_bus_reset {
+	__u64 closure;
+	__u32 type;
+	__u32 node_id;
+	__u32 local_node_id;
+	__u32 bm_node_id;
+	__u32 irm_node_id;
+	__u32 root_node_id;
+	__u32 generation;
+};
+
+/**
+ * struct fw_cdev_event_response - Sent when a response packet was received
+ * @closure:	See &fw_cdev_event_common; set by %FW_CDEV_IOC_SEND_REQUEST
+ *		or %FW_CDEV_IOC_SEND_BROADCAST_REQUEST
+ *		or %FW_CDEV_IOC_SEND_STREAM_PACKET ioctl
+ * @type:	See &fw_cdev_event_common; always %FW_CDEV_EVENT_RESPONSE
+ * @rcode:	Response code returned by the remote node
+ * @length:	Data length, i.e. the response's payload size in bytes
+ * @data:	Payload data, if any
+ *
+ * This event is sent when the stack receives a response to an outgoing request
+ * sent by %FW_CDEV_IOC_SEND_REQUEST ioctl.  The payload data for responses
+ * carrying data (read and lock responses) follows immediately and can be
+ * accessed through the @data field.
+ *
+ * The event is also generated after conclusions of transactions that do not
+ * involve response packets.  This includes unified write transactions,
+ * broadcast write transactions, and transmission of asynchronous stream
+ * packets.  @rcode indicates success or failure of such transmissions.
+ */
+struct fw_cdev_event_response {
+	__u64 closure;
+	__u32 type;
+	__u32 rcode;
+	__u32 length;
+	__u32 data[0];
+};
+
+/**
+ * struct fw_cdev_event_request - Old version of &fw_cdev_event_request2
+ * @type:	See &fw_cdev_event_common; always %FW_CDEV_EVENT_REQUEST
+ *
+ * This event is sent instead of &fw_cdev_event_request2 if the kernel or
+ * the client implements ABI version <= 3.  &fw_cdev_event_request lacks
+ * essential information; use &fw_cdev_event_request2 instead.
+ */
+struct fw_cdev_event_request {
+	__u64 closure;
+	__u32 type;
+	__u32 tcode;
+	__u64 offset;
+	__u32 handle;
+	__u32 length;
+	__u32 data[0];
+};
+
+/**
+ * struct fw_cdev_event_request2 - Sent on incoming request to an address region
+ * @closure:	See &fw_cdev_event_common; set by %FW_CDEV_IOC_ALLOCATE ioctl
+ * @type:	See &fw_cdev_event_common; always %FW_CDEV_EVENT_REQUEST2
+ * @tcode:	Transaction code of the incoming request
+ * @offset:	The offset into the 48-bit per-node address space
+ * @source_node_id: Sender node ID
+ * @destination_node_id: Destination node ID
+ * @card:	The index of the card from which the request came
+ * @generation:	Bus generation in which the request is valid
+ * @handle:	Reference to the kernel-side pending request
+ * @length:	Data length, i.e. the request's payload size in bytes
+ * @data:	Incoming data, if any
+ *
+ * This event is sent when the stack receives an incoming request to an address
+ * region registered using the %FW_CDEV_IOC_ALLOCATE ioctl.  The request is
+ * guaranteed to be completely contained in the specified region.  Userspace is
+ * responsible for sending the response by %FW_CDEV_IOC_SEND_RESPONSE ioctl,
+ * using the same @handle.
+ *
+ * The payload data for requests carrying data (write and lock requests)
+ * follows immediately and can be accessed through the @data field.
+ *
+ * Unlike &fw_cdev_event_request, @tcode of lock requests is one of the
+ * firewire-core specific %TCODE_LOCK_MASK_SWAP...%TCODE_LOCK_VENDOR_DEPENDENT,
+ * i.e. encodes the extended transaction code.
+ *
+ * @card may differ from &fw_cdev_get_info.card because requests are received
+ * from all cards of the Linux host.  @source_node_id, @destination_node_id, and
+ * @generation pertain to that card.  Destination node ID and bus generation may
+ * therefore differ from the corresponding fields of the last
+ * &fw_cdev_event_bus_reset.
+ *
+ * @destination_node_id may also differ from the current node ID because of a
+ * non-local bus ID part or in case of a broadcast write request.  Note, a
+ * client must call an %FW_CDEV_IOC_SEND_RESPONSE ioctl even in case of a
+ * broadcast write request; the kernel will then release the kernel-side pending
+ * request but will not actually send a response packet.
+ *
+ * In case of a write request to FCP_REQUEST or FCP_RESPONSE, the kernel already
+ * sent a write response immediately after the request was received; in this
+ * case the client must still call an %FW_CDEV_IOC_SEND_RESPONSE ioctl to
+ * release the kernel-side pending request, though another response won't be
+ * sent.
+ *
+ * If the client subsequently needs to initiate requests to the sender node of
+ * an &fw_cdev_event_request2, it needs to use a device file with matching
+ * card index, node ID, and generation for outbound requests.
+ */
+struct fw_cdev_event_request2 {
+	__u64 closure;
+	__u32 type;
+	__u32 tcode;
+	__u64 offset;
+	__u32 source_node_id;
+	__u32 destination_node_id;
+	__u32 card;
+	__u32 generation;
+	__u32 handle;
+	__u32 length;
+	__u32 data[0];
+};
+
+/**
+ * struct fw_cdev_event_iso_interrupt - Sent when an iso packet was completed
+ * @closure:	See &fw_cdev_event_common;
+ *		set by %FW_CDEV_CREATE_ISO_CONTEXT ioctl
+ * @type:	See &fw_cdev_event_common; always %FW_CDEV_EVENT_ISO_INTERRUPT
+ * @cycle:	Cycle counter of the last completed packet
+ * @header_length: Total length of following headers, in bytes
+ * @header:	Stripped headers, if any
+ *
+ * This event is sent when the controller has completed an &fw_cdev_iso_packet
+ * with the %FW_CDEV_ISO_INTERRUPT bit set, when explicitly requested with
+ * %FW_CDEV_IOC_FLUSH_ISO, or when there have been so many completed packets
+ * without the interrupt bit set that the kernel's internal buffer for @header
+ * is about to overflow.  (In the last case, kernels with ABI version < 5 drop
+ * header data up to the next interrupt packet.)
+ *
+ * Isochronous transmit events (context type %FW_CDEV_ISO_CONTEXT_TRANSMIT):
+ *
+ * In version 3 and some implementations of version 2 of the ABI, &header_length
+ * is a multiple of 4 and &header contains timestamps of all packets up until
+ * the interrupt packet.  The format of the timestamps is as described below for
+ * isochronous reception.  In version 1 of the ABI, &header_length was 0.
+ *
+ * Isochronous receive events (context type %FW_CDEV_ISO_CONTEXT_RECEIVE):
+ *
+ * The headers stripped of all packets up until and including the interrupt
+ * packet are returned in the @header field.  The amount of header data per
+ * packet is as specified at iso context creation by
+ * &fw_cdev_create_iso_context.header_size.
+ *
+ * Hence, _interrupt.header_length / _context.header_size is the number of
+ * packets received in this interrupt event.  The client can now iterate
+ * through the mmap()'ed DMA buffer according to this number of packets and
+ * to the buffer sizes as the client specified in &fw_cdev_queue_iso.
+ *
+ * Since version 2 of this ABI, the portion for each packet in _interrupt.header
+ * consists of the 1394 isochronous packet header, followed by a timestamp
+ * quadlet if &fw_cdev_create_iso_context.header_size > 4, followed by quadlets
+ * from the packet payload if &fw_cdev_create_iso_context.header_size > 8.
+ *
+ * Format of 1394 iso packet header:  16 bits data_length, 2 bits tag, 6 bits
+ * channel, 4 bits tcode, 4 bits sy, in big endian byte order.
+ * data_length is the actual received size of the packet without the four
+ * 1394 iso packet header bytes.
+ *
+ * Format of timestamp:  16 bits invalid, 3 bits cycleSeconds, 13 bits
+ * cycleCount, in big endian byte order.
+ *
+ * In version 1 of the ABI, no timestamp quadlet was inserted; instead, payload
+ * data followed directly after the 1394 is header if header_size > 4.
+ * Behaviour of ver. 1 of this ABI is no longer available since ABI ver. 2.
+ */
+struct fw_cdev_event_iso_interrupt {
+	__u64 closure;
+	__u32 type;
+	__u32 cycle;
+	__u32 header_length;
+	__u32 header[0];
+};
+
+/**
+ * struct fw_cdev_event_iso_interrupt_mc - An iso buffer chunk was completed
+ * @closure:	See &fw_cdev_event_common;
+ *		set by %FW_CDEV_CREATE_ISO_CONTEXT ioctl
+ * @type:	%FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL
+ * @completed:	Offset into the receive buffer; data before this offset is valid
+ *
+ * This event is sent in multichannel contexts (context type
+ * %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL) for &fw_cdev_iso_packet buffer
+ * chunks that have been completely filled and that have the
+ * %FW_CDEV_ISO_INTERRUPT bit set, or when explicitly requested with
+ * %FW_CDEV_IOC_FLUSH_ISO.
+ *
+ * The buffer is continuously filled with the following data, per packet:
+ *  - the 1394 iso packet header as described at &fw_cdev_event_iso_interrupt,
+ *    but in little endian byte order,
+ *  - packet payload (as many bytes as specified in the data_length field of
+ *    the 1394 iso packet header) in big endian byte order,
+ *  - 0...3 padding bytes as needed to align the following trailer quadlet,
+ *  - trailer quadlet, containing the reception timestamp as described at
+ *    &fw_cdev_event_iso_interrupt, but in little endian byte order.
+ *
+ * Hence the per-packet size is data_length (rounded up to a multiple of 4) + 8.
+ * When processing the data, stop before a packet that would cross the
+ * @completed offset.
+ *
+ * A packet near the end of a buffer chunk will typically spill over into the
+ * next queued buffer chunk.  It is the responsibility of the client to check
+ * for this condition, assemble a broken-up packet from its parts, and not to
+ * re-queue any buffer chunks in which as yet unread packet parts reside.
+ */
+struct fw_cdev_event_iso_interrupt_mc {
+	__u64 closure;
+	__u32 type;
+	__u32 completed;
+};
+
+/**
+ * struct fw_cdev_event_iso_resource - Iso resources were allocated or freed
+ * @closure:	See &fw_cdev_event_common;
+ *		set by %FW_CDEV_IOC_(DE)ALLOCATE_ISO_RESOURCE(_ONCE) ioctl
+ * @type:	%FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED or
+ *		%FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED
+ * @handle:	Reference by which an allocated resource can be deallocated
+ * @channel:	Isochronous channel which was (de)allocated, if any
+ * @bandwidth:	Bandwidth allocation units which were (de)allocated, if any
+ *
+ * An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED event is sent after an isochronous
+ * resource was allocated at the IRM.  The client has to check @channel and
+ * @bandwidth for whether the allocation actually succeeded.
+ *
+ * An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event is sent after an isochronous
+ * resource was deallocated at the IRM.  It is also sent when automatic
+ * reallocation after a bus reset failed.
+ *
+ * @channel is <0 if no channel was (de)allocated or if reallocation failed.
+ * @bandwidth is 0 if no bandwidth was (de)allocated or if reallocation failed.
+ */
+struct fw_cdev_event_iso_resource {
+	__u64 closure;
+	__u32 type;
+	__u32 handle;
+	__s32 channel;
+	__s32 bandwidth;
+};
+
+/**
+ * struct fw_cdev_event_phy_packet - A PHY packet was transmitted or received
+ * @closure:	See &fw_cdev_event_common; set by %FW_CDEV_IOC_SEND_PHY_PACKET
+ *		or %FW_CDEV_IOC_RECEIVE_PHY_PACKETS ioctl
+ * @type:	%FW_CDEV_EVENT_PHY_PACKET_SENT or %..._RECEIVED
+ * @rcode:	%RCODE_..., indicates success or failure of transmission
+ * @length:	Data length in bytes
+ * @data:	Incoming data
+ *
+ * If @type is %FW_CDEV_EVENT_PHY_PACKET_SENT, @length is 0 and @data empty,
+ * except in case of a ping packet:  Then, @length is 4, and @data[0] is the
+ * ping time in 49.152MHz clocks if @rcode is %RCODE_COMPLETE.
+ *
+ * If @type is %FW_CDEV_EVENT_PHY_PACKET_RECEIVED, @length is 8 and @data
+ * consists of the two PHY packet quadlets, in host byte order.
+ */
+struct fw_cdev_event_phy_packet {
+	__u64 closure;
+	__u32 type;
+	__u32 rcode;
+	__u32 length;
+	__u32 data[0];
+};
+
+/**
+ * union fw_cdev_event - Convenience union of fw_cdev_event_ types
+ * @common:		Valid for all types
+ * @bus_reset:		Valid if @common.type == %FW_CDEV_EVENT_BUS_RESET
+ * @response:		Valid if @common.type == %FW_CDEV_EVENT_RESPONSE
+ * @request:		Valid if @common.type == %FW_CDEV_EVENT_REQUEST
+ * @request2:		Valid if @common.type == %FW_CDEV_EVENT_REQUEST2
+ * @iso_interrupt:	Valid if @common.type == %FW_CDEV_EVENT_ISO_INTERRUPT
+ * @iso_interrupt_mc:	Valid if @common.type ==
+ *				%FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL
+ * @iso_resource:	Valid if @common.type ==
+ *				%FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED or
+ *				%FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED
+ * @phy_packet:		Valid if @common.type ==
+ *				%FW_CDEV_EVENT_PHY_PACKET_SENT or
+ *				%FW_CDEV_EVENT_PHY_PACKET_RECEIVED
+ *
+ * Convenience union for userspace use.  Events could be read(2) into an
+ * appropriately aligned char buffer and then cast to this union for further
+ * processing.  Note that for a request, response or iso_interrupt event,
+ * the data[] or header[] may make the size of the full event larger than
+ * sizeof(union fw_cdev_event).  Also note that if you attempt to read(2)
+ * an event into a buffer that is not large enough for it, the data that does
+ * not fit will be discarded so that the next read(2) will return a new event.
+ */
+union fw_cdev_event {
+	struct fw_cdev_event_common		common;
+	struct fw_cdev_event_bus_reset		bus_reset;
+	struct fw_cdev_event_response		response;
+	struct fw_cdev_event_request		request;
+	struct fw_cdev_event_request2		request2;		/* added in 2.6.36 */
+	struct fw_cdev_event_iso_interrupt	iso_interrupt;
+	struct fw_cdev_event_iso_interrupt_mc	iso_interrupt_mc;	/* added in 2.6.36 */
+	struct fw_cdev_event_iso_resource	iso_resource;		/* added in 2.6.30 */
+	struct fw_cdev_event_phy_packet		phy_packet;		/* added in 2.6.36 */
+};
+
+/* available since kernel version 2.6.22 */
+#define FW_CDEV_IOC_GET_INFO           _IOWR('#', 0x00, struct fw_cdev_get_info)
+#define FW_CDEV_IOC_SEND_REQUEST        _IOW('#', 0x01, struct fw_cdev_send_request)
+#define FW_CDEV_IOC_ALLOCATE           _IOWR('#', 0x02, struct fw_cdev_allocate)
+#define FW_CDEV_IOC_DEALLOCATE          _IOW('#', 0x03, struct fw_cdev_deallocate)
+#define FW_CDEV_IOC_SEND_RESPONSE       _IOW('#', 0x04, struct fw_cdev_send_response)
+#define FW_CDEV_IOC_INITIATE_BUS_RESET  _IOW('#', 0x05, struct fw_cdev_initiate_bus_reset)
+#define FW_CDEV_IOC_ADD_DESCRIPTOR     _IOWR('#', 0x06, struct fw_cdev_add_descriptor)
+#define FW_CDEV_IOC_REMOVE_DESCRIPTOR   _IOW('#', 0x07, struct fw_cdev_remove_descriptor)
+#define FW_CDEV_IOC_CREATE_ISO_CONTEXT _IOWR('#', 0x08, struct fw_cdev_create_iso_context)
+#define FW_CDEV_IOC_QUEUE_ISO          _IOWR('#', 0x09, struct fw_cdev_queue_iso)
+#define FW_CDEV_IOC_START_ISO           _IOW('#', 0x0a, struct fw_cdev_start_iso)
+#define FW_CDEV_IOC_STOP_ISO            _IOW('#', 0x0b, struct fw_cdev_stop_iso)
+
+/* available since kernel version 2.6.24 */
+#define FW_CDEV_IOC_GET_CYCLE_TIMER     _IOR('#', 0x0c, struct fw_cdev_get_cycle_timer)
+
+/* available since kernel version 2.6.30 */
+#define FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE       _IOWR('#', 0x0d, struct fw_cdev_allocate_iso_resource)
+#define FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE      _IOW('#', 0x0e, struct fw_cdev_deallocate)
+#define FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE   _IOW('#', 0x0f, struct fw_cdev_allocate_iso_resource)
+#define FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE_ONCE _IOW('#', 0x10, struct fw_cdev_allocate_iso_resource)
+#define FW_CDEV_IOC_GET_SPEED                     _IO('#', 0x11) /* returns speed code */
+#define FW_CDEV_IOC_SEND_BROADCAST_REQUEST       _IOW('#', 0x12, struct fw_cdev_send_request)
+#define FW_CDEV_IOC_SEND_STREAM_PACKET           _IOW('#', 0x13, struct fw_cdev_send_stream_packet)
+
+/* available since kernel version 2.6.34 */
+#define FW_CDEV_IOC_GET_CYCLE_TIMER2   _IOWR('#', 0x14, struct fw_cdev_get_cycle_timer2)
+
+/* available since kernel version 2.6.36 */
+#define FW_CDEV_IOC_SEND_PHY_PACKET    _IOWR('#', 0x15, struct fw_cdev_send_phy_packet)
+#define FW_CDEV_IOC_RECEIVE_PHY_PACKETS _IOW('#', 0x16, struct fw_cdev_receive_phy_packets)
+#define FW_CDEV_IOC_SET_ISO_CHANNELS    _IOW('#', 0x17, struct fw_cdev_set_iso_channels)
+
+/* available since kernel version 3.4 */
+#define FW_CDEV_IOC_FLUSH_ISO           _IOW('#', 0x18, struct fw_cdev_flush_iso)
+
+/*
+ * ABI version history
+ *  1  (2.6.22)  - initial version
+ *     (2.6.24)  - added %FW_CDEV_IOC_GET_CYCLE_TIMER
+ *  2  (2.6.30)  - changed &fw_cdev_event_iso_interrupt.header if
+ *                 &fw_cdev_create_iso_context.header_size is 8 or more
+ *               - added %FW_CDEV_IOC_*_ISO_RESOURCE*,
+ *                 %FW_CDEV_IOC_GET_SPEED, %FW_CDEV_IOC_SEND_BROADCAST_REQUEST,
+ *                 %FW_CDEV_IOC_SEND_STREAM_PACKET
+ *     (2.6.32)  - added time stamp to xmit &fw_cdev_event_iso_interrupt
+ *     (2.6.33)  - IR has always packet-per-buffer semantics now, not one of
+ *                 dual-buffer or packet-per-buffer depending on hardware
+ *               - shared use and auto-response for FCP registers
+ *  3  (2.6.34)  - made &fw_cdev_get_cycle_timer reliable
+ *               - added %FW_CDEV_IOC_GET_CYCLE_TIMER2
+ *  4  (2.6.36)  - added %FW_CDEV_EVENT_REQUEST2, %FW_CDEV_EVENT_PHY_PACKET_*,
+ *                 and &fw_cdev_allocate.region_end
+ *               - implemented &fw_cdev_event_bus_reset.bm_node_id
+ *               - added %FW_CDEV_IOC_SEND_PHY_PACKET, _RECEIVE_PHY_PACKETS
+ *               - added %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL,
+ *                 %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL, and
+ *                 %FW_CDEV_IOC_SET_ISO_CHANNELS
+ *  5  (3.4)     - send %FW_CDEV_EVENT_ISO_INTERRUPT events when needed to
+ *                 avoid dropping data
+ *               - added %FW_CDEV_IOC_FLUSH_ISO
+ */
+
+/**
+ * struct fw_cdev_get_info - General purpose information ioctl
+ * @version:	The version field is just a running serial number.  Both an
+ *		input parameter (ABI version implemented by the client) and
+ *		output parameter (ABI version implemented by the kernel).
+ *		A client shall fill in the ABI @version for which the client
+ *		was implemented.  This is necessary for forward compatibility.
+ * @rom_length:	If @rom is non-zero, up to @rom_length bytes of Configuration
+ *		ROM will be copied into that user space address.  In either
+ *		case, @rom_length is updated with the actual length of the
+ *		Configuration ROM.
+ * @rom:	If non-zero, address of a buffer to be filled by a copy of the
+ *		device's Configuration ROM
+ * @bus_reset:	If non-zero, address of a buffer to be filled by a
+ *		&struct fw_cdev_event_bus_reset with the current state
+ *		of the bus.  This does not cause a bus reset to happen.
+ * @bus_reset_closure: Value of &closure in this and subsequent bus reset events
+ * @card:	The index of the card this device belongs to
+ *
+ * The %FW_CDEV_IOC_GET_INFO ioctl is usually the very first one which a client
+ * performs right after it opened a /dev/fw* file.
+ *
+ * As a side effect, reception of %FW_CDEV_EVENT_BUS_RESET events to be read(2)
+ * is started by this ioctl.
+ */
+struct fw_cdev_get_info {
+	__u32 version;
+	__u32 rom_length;
+	__u64 rom;
+	__u64 bus_reset;
+	__u64 bus_reset_closure;
+	__u32 card;
+};
+
+/**
+ * struct fw_cdev_send_request - Send an asynchronous request packet
+ * @tcode:	Transaction code of the request
+ * @length:	Length of outgoing payload, in bytes
+ * @offset:	48-bit offset at destination node
+ * @closure:	Passed back to userspace in the response event
+ * @data:	Userspace pointer to payload
+ * @generation:	The bus generation where packet is valid
+ *
+ * Send a request to the device.  This ioctl implements all outgoing requests.
+ * Both quadlet and block request specify the payload as a pointer to the data
+ * in the @data field.  Once the transaction completes, the kernel writes an
+ * &fw_cdev_event_response event back.  The @closure field is passed back to
+ * user space in the response event.
+ */
+struct fw_cdev_send_request {
+	__u32 tcode;
+	__u32 length;
+	__u64 offset;
+	__u64 closure;
+	__u64 data;
+	__u32 generation;
+};
+
+/**
+ * struct fw_cdev_send_response - Send an asynchronous response packet
+ * @rcode:	Response code as determined by the userspace handler
+ * @length:	Length of outgoing payload, in bytes
+ * @data:	Userspace pointer to payload
+ * @handle:	The handle from the &fw_cdev_event_request
+ *
+ * Send a response to an incoming request.  By setting up an address range using
+ * the %FW_CDEV_IOC_ALLOCATE ioctl, userspace can listen for incoming requests.  An
+ * incoming request will generate an %FW_CDEV_EVENT_REQUEST, and userspace must
+ * send a reply using this ioctl.  The event has a handle to the kernel-side
+ * pending transaction, which should be used with this ioctl.
+ */
+struct fw_cdev_send_response {
+	__u32 rcode;
+	__u32 length;
+	__u64 data;
+	__u32 handle;
+};
+
+/**
+ * struct fw_cdev_allocate - Allocate a CSR in an address range
+ * @offset:	Start offset of the address range
+ * @closure:	To be passed back to userspace in request events
+ * @length:	Length of the CSR, in bytes
+ * @handle:	Handle to the allocation, written by the kernel
+ * @region_end:	First address above the address range (added in ABI v4, 2.6.36)
+ *
+ * Allocate an address range in the 48-bit address space on the local node
+ * (the controller).  This allows userspace to listen for requests with an
+ * offset within that address range.  Every time when the kernel receives a
+ * request within the range, an &fw_cdev_event_request2 event will be emitted.
+ * (If the kernel or the client implements ABI version <= 3, an
+ * &fw_cdev_event_request will be generated instead.)
+ *
+ * The @closure field is passed back to userspace in these request events.
+ * The @handle field is an out parameter, returning a handle to the allocated
+ * range to be used for later deallocation of the range.
+ *
+ * The address range is allocated on all local nodes.  The address allocation
+ * is exclusive except for the FCP command and response registers.  If an
+ * exclusive address region is already in use, the ioctl fails with errno set
+ * to %EBUSY.
+ *
+ * If kernel and client implement ABI version >= 4, the kernel looks up a free
+ * spot of size @length inside [@offset..@region_end) and, if found, writes
+ * the start address of the new CSR back in @offset.  I.e. @offset is an
+ * in and out parameter.  If this automatic placement of a CSR in a bigger
+ * address range is not desired, the client simply needs to set @region_end
+ * = @offset + @length.
+ *
+ * If the kernel or the client implements ABI version <= 3, @region_end is
+ * ignored and effectively assumed to be @offset + @length.
+ *
+ * @region_end is only present in a kernel header >= 2.6.36.  If necessary,
+ * this can for example be tested by #ifdef FW_CDEV_EVENT_REQUEST2.
+ */
+struct fw_cdev_allocate {
+	__u64 offset;
+	__u64 closure;
+	__u32 length;
+	__u32 handle;
+	__u64 region_end;	/* available since kernel version 2.6.36 */
+};
+
+/**
+ * struct fw_cdev_deallocate - Free a CSR address range or isochronous resource
+ * @handle:	Handle to the address range or iso resource, as returned by the
+ *		kernel when the range or resource was allocated
+ */
+struct fw_cdev_deallocate {
+	__u32 handle;
+};
+
+#define FW_CDEV_LONG_RESET	0
+#define FW_CDEV_SHORT_RESET	1
+
+/**
+ * struct fw_cdev_initiate_bus_reset - Initiate a bus reset
+ * @type:	%FW_CDEV_SHORT_RESET or %FW_CDEV_LONG_RESET
+ *
+ * Initiate a bus reset for the bus this device is on.  The bus reset can be
+ * either the original (long) bus reset or the arbitrated (short) bus reset
+ * introduced in 1394a-2000.
+ *
+ * The ioctl returns immediately.  A subsequent &fw_cdev_event_bus_reset
+ * indicates when the reset actually happened.  Since ABI v4, this may be
+ * considerably later than the ioctl because the kernel ensures a grace period
+ * between subsequent bus resets as per IEEE 1394 bus management specification.
+ */
+struct fw_cdev_initiate_bus_reset {
+	__u32 type;
+};
+
+/**
+ * struct fw_cdev_add_descriptor - Add contents to the local node's config ROM
+ * @immediate:	If non-zero, immediate key to insert before pointer
+ * @key:	Upper 8 bits of root directory pointer
+ * @data:	Userspace pointer to contents of descriptor block
+ * @length:	Length of descriptor block data, in quadlets
+ * @handle:	Handle to the descriptor, written by the kernel
+ *
+ * Add a descriptor block and optionally a preceding immediate key to the local
+ * node's Configuration ROM.
+ *
+ * The @key field specifies the upper 8 bits of the descriptor root directory
+ * pointer and the @data and @length fields specify the contents. The @key
+ * should be of the form 0xXX000000. The offset part of the root directory entry
+ * will be filled in by the kernel.
+ *
+ * If not 0, the @immediate field specifies an immediate key which will be
+ * inserted before the root directory pointer.
+ *
+ * @immediate, @key, and @data array elements are CPU-endian quadlets.
+ *
+ * If successful, the kernel adds the descriptor and writes back a @handle to
+ * the kernel-side object to be used for later removal of the descriptor block
+ * and immediate key.  The kernel will also generate a bus reset to signal the
+ * change of the Configuration ROM to other nodes.
+ *
+ * This ioctl affects the Configuration ROMs of all local nodes.
+ * The ioctl only succeeds on device files which represent a local node.
+ */
+struct fw_cdev_add_descriptor {
+	__u32 immediate;
+	__u32 key;
+	__u64 data;
+	__u32 length;
+	__u32 handle;
+};
+
+/**
+ * struct fw_cdev_remove_descriptor - Remove contents from the Configuration ROM
+ * @handle:	Handle to the descriptor, as returned by the kernel when the
+ *		descriptor was added
+ *
+ * Remove a descriptor block and accompanying immediate key from the local
+ * nodes' Configuration ROMs.  The kernel will also generate a bus reset to
+ * signal the change of the Configuration ROM to other nodes.
+ */
+struct fw_cdev_remove_descriptor {
+	__u32 handle;
+};
+
+#define FW_CDEV_ISO_CONTEXT_TRANSMIT			0
+#define FW_CDEV_ISO_CONTEXT_RECEIVE			1
+#define FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL	2 /* added in 2.6.36 */
+
+/**
+ * struct fw_cdev_create_iso_context - Create a context for isochronous I/O
+ * @type:	%FW_CDEV_ISO_CONTEXT_TRANSMIT or %FW_CDEV_ISO_CONTEXT_RECEIVE or
+ *		%FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL
+ * @header_size: Header size to strip in single-channel reception
+ * @channel:	Channel to bind to in single-channel reception or transmission
+ * @speed:	Transmission speed
+ * @closure:	To be returned in &fw_cdev_event_iso_interrupt or
+ *		&fw_cdev_event_iso_interrupt_multichannel
+ * @handle:	Handle to context, written back by kernel
+ *
+ * Prior to sending or receiving isochronous I/O, a context must be created.
+ * The context records information about the transmit or receive configuration
+ * and typically maps to an underlying hardware resource.  A context is set up
+ * for either sending or receiving.  It is bound to a specific isochronous
+ * @channel.
+ *
+ * In case of multichannel reception, @header_size and @channel are ignored
+ * and the channels are selected by %FW_CDEV_IOC_SET_ISO_CHANNELS.
+ *
+ * For %FW_CDEV_ISO_CONTEXT_RECEIVE contexts, @header_size must be at least 4
+ * and must be a multiple of 4.  It is ignored in other context types.
+ *
+ * @speed is ignored in receive context types.
+ *
+ * If a context was successfully created, the kernel writes back a handle to the
+ * context, which must be passed in for subsequent operations on that context.
+ *
+ * Limitations:
+ * No more than one iso context can be created per fd.
+ * The total number of contexts that all userspace and kernelspace drivers can
+ * create on a card at a time is a hardware limit, typically 4 or 8 contexts per
+ * direction, and of them at most one multichannel receive context.
+ */
+struct fw_cdev_create_iso_context {
+	__u32 type;
+	__u32 header_size;
+	__u32 channel;
+	__u32 speed;
+	__u64 closure;
+	__u32 handle;
+};
+
+/**
+ * struct fw_cdev_set_iso_channels - Select channels in multichannel reception
+ * @channels:	Bitmask of channels to listen to
+ * @handle:	Handle of the mutichannel receive context
+ *
+ * @channels is the bitwise or of 1ULL << n for each channel n to listen to.
+ *
+ * The ioctl fails with errno %EBUSY if there is already another receive context
+ * on a channel in @channels.  In that case, the bitmask of all unoccupied
+ * channels is returned in @channels.
+ */
+struct fw_cdev_set_iso_channels {
+	__u64 channels;
+	__u32 handle;
+};
+
+#define FW_CDEV_ISO_PAYLOAD_LENGTH(v)	(v)
+#define FW_CDEV_ISO_INTERRUPT		(1 << 16)
+#define FW_CDEV_ISO_SKIP		(1 << 17)
+#define FW_CDEV_ISO_SYNC		(1 << 17)
+#define FW_CDEV_ISO_TAG(v)		((v) << 18)
+#define FW_CDEV_ISO_SY(v)		((v) << 20)
+#define FW_CDEV_ISO_HEADER_LENGTH(v)	((v) << 24)
+
+/**
+ * struct fw_cdev_iso_packet - Isochronous packet
+ * @control:	Contains the header length (8 uppermost bits),
+ *		the sy field (4 bits), the tag field (2 bits), a sync flag
+ *		or a skip flag (1 bit), an interrupt flag (1 bit), and the
+ *		payload length (16 lowermost bits)
+ * @header:	Header and payload in case of a transmit context.
+ *
+ * &struct fw_cdev_iso_packet is used to describe isochronous packet queues.
+ * Use the FW_CDEV_ISO_ macros to fill in @control.
+ * The @header array is empty in case of receive contexts.
+ *
+ * Context type %FW_CDEV_ISO_CONTEXT_TRANSMIT:
+ *
+ * @control.HEADER_LENGTH must be a multiple of 4.  It specifies the numbers of
+ * bytes in @header that will be prepended to the packet's payload.  These bytes
+ * are copied into the kernel and will not be accessed after the ioctl has
+ * returned.
+ *
+ * The @control.SY and TAG fields are copied to the iso packet header.  These
+ * fields are specified by IEEE 1394a and IEC 61883-1.
+ *
+ * The @control.SKIP flag specifies that no packet is to be sent in a frame.
+ * When using this, all other fields except @control.INTERRUPT must be zero.
+ *
+ * When a packet with the @control.INTERRUPT flag set has been completed, an
+ * &fw_cdev_event_iso_interrupt event will be sent.
+ *
+ * Context type %FW_CDEV_ISO_CONTEXT_RECEIVE:
+ *
+ * @control.HEADER_LENGTH must be a multiple of the context's header_size.
+ * If the HEADER_LENGTH is larger than the context's header_size, multiple
+ * packets are queued for this entry.
+ *
+ * The @control.SY and TAG fields are ignored.
+ *
+ * If the @control.SYNC flag is set, the context drops all packets until a
+ * packet with a sy field is received which matches &fw_cdev_start_iso.sync.
+ *
+ * @control.PAYLOAD_LENGTH defines how many payload bytes can be received for
+ * one packet (in addition to payload quadlets that have been defined as headers
+ * and are stripped and returned in the &fw_cdev_event_iso_interrupt structure).
+ * If more bytes are received, the additional bytes are dropped.  If less bytes
+ * are received, the remaining bytes in this part of the payload buffer will not
+ * be written to, not even by the next packet.  I.e., packets received in
+ * consecutive frames will not necessarily be consecutive in memory.  If an
+ * entry has queued multiple packets, the PAYLOAD_LENGTH is divided equally
+ * among them.
+ *
+ * When a packet with the @control.INTERRUPT flag set has been completed, an
+ * &fw_cdev_event_iso_interrupt event will be sent.  An entry that has queued
+ * multiple receive packets is completed when its last packet is completed.
+ *
+ * Context type %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL:
+ *
+ * Here, &fw_cdev_iso_packet would be more aptly named _iso_buffer_chunk since
+ * it specifies a chunk of the mmap()'ed buffer, while the number and alignment
+ * of packets to be placed into the buffer chunk is not known beforehand.
+ *
+ * @control.PAYLOAD_LENGTH is the size of the buffer chunk and specifies room
+ * for header, payload, padding, and trailer bytes of one or more packets.
+ * It must be a multiple of 4.
+ *
+ * @control.HEADER_LENGTH, TAG and SY are ignored.  SYNC is treated as described
+ * for single-channel reception.
+ *
+ * When a buffer chunk with the @control.INTERRUPT flag set has been filled
+ * entirely, an &fw_cdev_event_iso_interrupt_mc event will be sent.
+ */
+struct fw_cdev_iso_packet {
+	__u32 control;
+	__u32 header[0];
+};
+
+/**
+ * struct fw_cdev_queue_iso - Queue isochronous packets for I/O
+ * @packets:	Userspace pointer to an array of &fw_cdev_iso_packet
+ * @data:	Pointer into mmap()'ed payload buffer
+ * @size:	Size of the @packets array, in bytes
+ * @handle:	Isochronous context handle
+ *
+ * Queue a number of isochronous packets for reception or transmission.
+ * This ioctl takes a pointer to an array of &fw_cdev_iso_packet structs,
+ * which describe how to transmit from or receive into a contiguous region
+ * of a mmap()'ed payload buffer.  As part of transmit packet descriptors,
+ * a series of headers can be supplied, which will be prepended to the
+ * payload during DMA.
+ *
+ * The kernel may or may not queue all packets, but will write back updated
+ * values of the @packets, @data and @size fields, so the ioctl can be
+ * resubmitted easily.
+ *
+ * In case of a multichannel receive context, @data must be quadlet-aligned
+ * relative to the buffer start.
+ */
+struct fw_cdev_queue_iso {
+	__u64 packets;
+	__u64 data;
+	__u32 size;
+	__u32 handle;
+};
+
+#define FW_CDEV_ISO_CONTEXT_MATCH_TAG0		 1
+#define FW_CDEV_ISO_CONTEXT_MATCH_TAG1		 2
+#define FW_CDEV_ISO_CONTEXT_MATCH_TAG2		 4
+#define FW_CDEV_ISO_CONTEXT_MATCH_TAG3		 8
+#define FW_CDEV_ISO_CONTEXT_MATCH_ALL_TAGS	15
+
+/**
+ * struct fw_cdev_start_iso - Start an isochronous transmission or reception
+ * @cycle:	Cycle in which to start I/O.  If @cycle is greater than or
+ *		equal to 0, the I/O will start on that cycle.
+ * @sync:	Determines the value to wait for for receive packets that have
+ *		the %FW_CDEV_ISO_SYNC bit set
+ * @tags:	Tag filter bit mask.  Only valid for isochronous reception.
+ *		Determines the tag values for which packets will be accepted.
+ *		Use FW_CDEV_ISO_CONTEXT_MATCH_ macros to set @tags.
+ * @handle:	Isochronous context handle within which to transmit or receive
+ */
+struct fw_cdev_start_iso {
+	__s32 cycle;
+	__u32 sync;
+	__u32 tags;
+	__u32 handle;
+};
+
+/**
+ * struct fw_cdev_stop_iso - Stop an isochronous transmission or reception
+ * @handle:	Handle of isochronous context to stop
+ */
+struct fw_cdev_stop_iso {
+	__u32 handle;
+};
+
+/**
+ * struct fw_cdev_flush_iso - flush completed iso packets
+ * @handle:	handle of isochronous context to flush
+ *
+ * For %FW_CDEV_ISO_CONTEXT_TRANSMIT or %FW_CDEV_ISO_CONTEXT_RECEIVE contexts,
+ * report any completed packets.
+ *
+ * For %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL contexts, report the current
+ * offset in the receive buffer, if it has changed; this is typically in the
+ * middle of some buffer chunk.
+ *
+ * Any %FW_CDEV_EVENT_ISO_INTERRUPT or %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL
+ * events generated by this ioctl are sent synchronously, i.e., are available
+ * for reading from the file descriptor when this ioctl returns.
+ */
+struct fw_cdev_flush_iso {
+	__u32 handle;
+};
+
+/**
+ * struct fw_cdev_get_cycle_timer - read cycle timer register
+ * @local_time:   system time, in microseconds since the Epoch
+ * @cycle_timer:  Cycle Time register contents
+ *
+ * Same as %FW_CDEV_IOC_GET_CYCLE_TIMER2, but fixed to use %CLOCK_REALTIME
+ * and only with microseconds resolution.
+ *
+ * In version 1 and 2 of the ABI, this ioctl returned unreliable (non-
+ * monotonic) @cycle_timer values on certain controllers.
+ */
+struct fw_cdev_get_cycle_timer {
+	__u64 local_time;
+	__u32 cycle_timer;
+};
+
+/**
+ * struct fw_cdev_get_cycle_timer2 - read cycle timer register
+ * @tv_sec:       system time, seconds
+ * @tv_nsec:      system time, sub-seconds part in nanoseconds
+ * @clk_id:       input parameter, clock from which to get the system time
+ * @cycle_timer:  Cycle Time register contents
+ *
+ * The %FW_CDEV_IOC_GET_CYCLE_TIMER2 ioctl reads the isochronous cycle timer
+ * and also the system clock.  This allows to correlate reception time of
+ * isochronous packets with system time.
+ *
+ * @clk_id lets you choose a clock like with POSIX' clock_gettime function.
+ * Supported @clk_id values are POSIX' %CLOCK_REALTIME and %CLOCK_MONOTONIC
+ * and Linux' %CLOCK_MONOTONIC_RAW.
+ *
+ * @cycle_timer consists of 7 bits cycleSeconds, 13 bits cycleCount, and
+ * 12 bits cycleOffset, in host byte order.  Cf. the Cycle Time register
+ * per IEEE 1394 or Isochronous Cycle Timer register per OHCI-1394.
+ */
+struct fw_cdev_get_cycle_timer2 {
+	__s64 tv_sec;
+	__s32 tv_nsec;
+	__s32 clk_id;
+	__u32 cycle_timer;
+};
+
+/**
+ * struct fw_cdev_allocate_iso_resource - (De)allocate a channel or bandwidth
+ * @closure:	Passed back to userspace in corresponding iso resource events
+ * @channels:	Isochronous channels of which one is to be (de)allocated
+ * @bandwidth:	Isochronous bandwidth units to be (de)allocated
+ * @handle:	Handle to the allocation, written by the kernel (only valid in
+ *		case of %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE ioctls)
+ *
+ * The %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE ioctl initiates allocation of an
+ * isochronous channel and/or of isochronous bandwidth at the isochronous
+ * resource manager (IRM).  Only one of the channels specified in @channels is
+ * allocated.  An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED is sent after
+ * communication with the IRM, indicating success or failure in the event data.
+ * The kernel will automatically reallocate the resources after bus resets.
+ * Should a reallocation fail, an %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event
+ * will be sent.  The kernel will also automatically deallocate the resources
+ * when the file descriptor is closed.
+ *
+ * The %FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE ioctl can be used to initiate
+ * deallocation of resources which were allocated as described above.
+ * An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event concludes this operation.
+ *
+ * The %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE ioctl is a variant of allocation
+ * without automatic re- or deallocation.
+ * An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED event concludes this operation,
+ * indicating success or failure in its data.
+ *
+ * The %FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE_ONCE ioctl works like
+ * %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE except that resources are freed
+ * instead of allocated.
+ * An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event concludes this operation.
+ *
+ * To summarize, %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE allocates iso resources
+ * for the lifetime of the fd or @handle.
+ * In contrast, %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE allocates iso resources
+ * for the duration of a bus generation.
+ *
+ * @channels is a host-endian bitfield with the least significant bit
+ * representing channel 0 and the most significant bit representing channel 63:
+ * 1ULL << c for each channel c that is a candidate for (de)allocation.
+ *
+ * @bandwidth is expressed in bandwidth allocation units, i.e. the time to send
+ * one quadlet of data (payload or header data) at speed S1600.
+ */
+struct fw_cdev_allocate_iso_resource {
+	__u64 closure;
+	__u64 channels;
+	__u32 bandwidth;
+	__u32 handle;
+};
+
+/**
+ * struct fw_cdev_send_stream_packet - send an asynchronous stream packet
+ * @length:	Length of outgoing payload, in bytes
+ * @tag:	Data format tag
+ * @channel:	Isochronous channel to transmit to
+ * @sy:		Synchronization code
+ * @closure:	Passed back to userspace in the response event
+ * @data:	Userspace pointer to payload
+ * @generation:	The bus generation where packet is valid
+ * @speed:	Speed to transmit at
+ *
+ * The %FW_CDEV_IOC_SEND_STREAM_PACKET ioctl sends an asynchronous stream packet
+ * to every device which is listening to the specified channel.  The kernel
+ * writes an &fw_cdev_event_response event which indicates success or failure of
+ * the transmission.
+ */
+struct fw_cdev_send_stream_packet {
+	__u32 length;
+	__u32 tag;
+	__u32 channel;
+	__u32 sy;
+	__u64 closure;
+	__u64 data;
+	__u32 generation;
+	__u32 speed;
+};
+
+/**
+ * struct fw_cdev_send_phy_packet - send a PHY packet
+ * @closure:	Passed back to userspace in the PHY-packet-sent event
+ * @data:	First and second quadlet of the PHY packet
+ * @generation:	The bus generation where packet is valid
+ *
+ * The %FW_CDEV_IOC_SEND_PHY_PACKET ioctl sends a PHY packet to all nodes
+ * on the same card as this device.  After transmission, an
+ * %FW_CDEV_EVENT_PHY_PACKET_SENT event is generated.
+ *
+ * The payload @data[] shall be specified in host byte order.  Usually,
+ * @data[1] needs to be the bitwise inverse of @data[0].  VersaPHY packets
+ * are an exception to this rule.
+ *
+ * The ioctl is only permitted on device files which represent a local node.
+ */
+struct fw_cdev_send_phy_packet {
+	__u64 closure;
+	__u32 data[2];
+	__u32 generation;
+};
+
+/**
+ * struct fw_cdev_receive_phy_packets - start reception of PHY packets
+ * @closure: Passed back to userspace in phy packet events
+ *
+ * This ioctl activates issuing of %FW_CDEV_EVENT_PHY_PACKET_RECEIVED due to
+ * incoming PHY packets from any node on the same bus as the device.
+ *
+ * The ioctl is only permitted on device files which represent a local node.
+ */
+struct fw_cdev_receive_phy_packets {
+	__u64 closure;
+};
+
+#define FW_CDEV_VERSION 3 /* Meaningless legacy macro; don't use it. */
+
+#endif /* _LINUX_FIREWIRE_CDEV_H */
diff --git a/include/uapi/linux/firewire-constants.h b/include/uapi/linux/firewire-constants.h
new file mode 100644
index 00000000000..9b4bb5fbba4
--- /dev/null
+++ b/include/uapi/linux/firewire-constants.h
@@ -0,0 +1,92 @@
+/*
+ * IEEE 1394 constants.
+ *
+ * Copyright (C) 2005-2007  Kristian Hoegsberg <krh@bitplanet.net>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _LINUX_FIREWIRE_CONSTANTS_H
+#define _LINUX_FIREWIRE_CONSTANTS_H
+
+#define TCODE_WRITE_QUADLET_REQUEST	0x0
+#define TCODE_WRITE_BLOCK_REQUEST	0x1
+#define TCODE_WRITE_RESPONSE		0x2
+#define TCODE_READ_QUADLET_REQUEST	0x4
+#define TCODE_READ_BLOCK_REQUEST	0x5
+#define TCODE_READ_QUADLET_RESPONSE	0x6
+#define TCODE_READ_BLOCK_RESPONSE	0x7
+#define TCODE_CYCLE_START		0x8
+#define TCODE_LOCK_REQUEST		0x9
+#define TCODE_STREAM_DATA		0xa
+#define TCODE_LOCK_RESPONSE		0xb
+
+#define EXTCODE_MASK_SWAP		0x1
+#define EXTCODE_COMPARE_SWAP		0x2
+#define EXTCODE_FETCH_ADD		0x3
+#define EXTCODE_LITTLE_ADD		0x4
+#define EXTCODE_BOUNDED_ADD		0x5
+#define EXTCODE_WRAP_ADD		0x6
+#define EXTCODE_VENDOR_DEPENDENT	0x7
+
+/* Linux firewire-core (Juju) specific tcodes */
+#define TCODE_LOCK_MASK_SWAP		(0x10 | EXTCODE_MASK_SWAP)
+#define TCODE_LOCK_COMPARE_SWAP		(0x10 | EXTCODE_COMPARE_SWAP)
+#define TCODE_LOCK_FETCH_ADD		(0x10 | EXTCODE_FETCH_ADD)
+#define TCODE_LOCK_LITTLE_ADD		(0x10 | EXTCODE_LITTLE_ADD)
+#define TCODE_LOCK_BOUNDED_ADD		(0x10 | EXTCODE_BOUNDED_ADD)
+#define TCODE_LOCK_WRAP_ADD		(0x10 | EXTCODE_WRAP_ADD)
+#define TCODE_LOCK_VENDOR_DEPENDENT	(0x10 | EXTCODE_VENDOR_DEPENDENT)
+
+#define RCODE_COMPLETE			0x0
+#define RCODE_CONFLICT_ERROR		0x4
+#define RCODE_DATA_ERROR		0x5
+#define RCODE_TYPE_ERROR		0x6
+#define RCODE_ADDRESS_ERROR		0x7
+
+/* Linux firewire-core (Juju) specific rcodes */
+#define RCODE_SEND_ERROR		0x10
+#define RCODE_CANCELLED			0x11
+#define RCODE_BUSY			0x12
+#define RCODE_GENERATION		0x13
+#define RCODE_NO_ACK			0x14
+
+#define SCODE_100			0x0
+#define SCODE_200			0x1
+#define SCODE_400			0x2
+#define SCODE_800			0x3
+#define SCODE_1600			0x4
+#define SCODE_3200			0x5
+#define SCODE_BETA			0x3
+
+#define ACK_COMPLETE			0x1
+#define ACK_PENDING			0x2
+#define ACK_BUSY_X			0x4
+#define ACK_BUSY_A			0x5
+#define ACK_BUSY_B			0x6
+#define ACK_DATA_ERROR			0xd
+#define ACK_TYPE_ERROR			0xe
+
+#define RETRY_1				0x00
+#define RETRY_X				0x01
+#define RETRY_A				0x02
+#define RETRY_B				0x03
+
+#endif /* _LINUX_FIREWIRE_CONSTANTS_H */
diff --git a/include/uapi/linux/flat.h b/include/uapi/linux/flat.h
new file mode 100644
index 00000000000..88cd6baba8f
--- /dev/null
+++ b/include/uapi/linux/flat.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2002-2003  David McCullough <davidm@snapgear.com>
+ * Copyright (C) 1998       Kenneth Albanowski <kjahds@kjahds.com>
+ *                          The Silver Hammer Group, Ltd.
+ *
+ * This file provides the definitions and structures needed to
+ * support uClinux flat-format executables.
+ */
+
+#ifndef _UAPI_LINUX_FLAT_H
+#define _UAPI_LINUX_FLAT_H
+
+
+#define	FLAT_VERSION			0x00000004L
+
+#ifdef CONFIG_BINFMT_SHARED_FLAT
+#define	MAX_SHARED_LIBS			(4)
+#else
+#define	MAX_SHARED_LIBS			(1)
+#endif
+
+/*
+ * To make everything easier to port and manage cross platform
+ * development,  all fields are in network byte order.
+ */
+
+struct flat_hdr {
+	char magic[4];
+	unsigned long rev;          /* version (as above) */
+	unsigned long entry;        /* Offset of first executable instruction
+	                               with text segment from beginning of file */
+	unsigned long data_start;   /* Offset of data segment from beginning of
+	                               file */
+	unsigned long data_end;     /* Offset of end of data segment
+	                               from beginning of file */
+	unsigned long bss_end;      /* Offset of end of bss segment from beginning
+	                               of file */
+
+	/* (It is assumed that data_end through bss_end forms the bss segment.) */
+
+	unsigned long stack_size;   /* Size of stack, in bytes */
+	unsigned long reloc_start;  /* Offset of relocation records from
+	                               beginning of file */
+	unsigned long reloc_count;  /* Number of relocation records */
+	unsigned long flags;       
+	unsigned long build_date;   /* When the program/library was built */
+	unsigned long filler[5];    /* Reservered, set to zero */
+};
+
+#define FLAT_FLAG_RAM    0x0001 /* load program entirely into RAM */
+#define FLAT_FLAG_GOTPIC 0x0002 /* program is PIC with GOT */
+#define FLAT_FLAG_GZIP   0x0004 /* all but the header is compressed */
+#define FLAT_FLAG_GZDATA 0x0008 /* only data/relocs are compressed (for XIP) */
+#define FLAT_FLAG_KTRACE 0x0010 /* output useful kernel trace for debugging */
+
+
+
+#endif /* _UAPI_LINUX_FLAT_H */
diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h
new file mode 100644
index 00000000000..9fcc880d4be
--- /dev/null
+++ b/include/uapi/linux/fs.h
@@ -0,0 +1,334 @@
+#ifndef _UAPI_LINUX_FS_H
+#define _UAPI_LINUX_FS_H
+
+/*
+ * This file has definitions for some important file table
+ * structures etc.
+ */
+
+#include <linux/limits.h>
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+/*
+ * It's silly to have NR_OPEN bigger than NR_FILE, but you can change
+ * the file limit at runtime and only root can increase the per-process
+ * nr_file rlimit, so it's safe to set up a ridiculously high absolute
+ * upper limit on files-per-process.
+ *
+ * Some programs (notably those using select()) may have to be 
+ * recompiled to take full advantage of the new limits..  
+ */
+
+/* Fixed constants first: */
+#undef NR_OPEN
+#define INR_OPEN_CUR 1024	/* Initial setting for nfile rlimits */
+#define INR_OPEN_MAX 4096	/* Hard limit for nfile rlimits */
+
+#define BLOCK_SIZE_BITS 10
+#define BLOCK_SIZE (1<<BLOCK_SIZE_BITS)
+
+#define SEEK_SET	0	/* seek relative to beginning of file */
+#define SEEK_CUR	1	/* seek relative to current file position */
+#define SEEK_END	2	/* seek relative to end of file */
+#define SEEK_DATA	3	/* seek to the next data */
+#define SEEK_HOLE	4	/* seek to the next hole */
+#define SEEK_MAX	SEEK_HOLE
+
+struct fstrim_range {
+	__u64 start;
+	__u64 len;
+	__u64 minlen;
+};
+
+/* And dynamically-tunable limits and defaults: */
+struct files_stat_struct {
+	unsigned long nr_files;		/* read only */
+	unsigned long nr_free_files;	/* read only */
+	unsigned long max_files;		/* tunable */
+};
+
+struct inodes_stat_t {
+	int nr_inodes;
+	int nr_unused;
+	int dummy[5];		/* padding for sysctl ABI compatibility */
+};
+
+
+#define NR_FILE  8192	/* this can well be larger on a larger system */
+
+#define MAY_EXEC		0x00000001
+#define MAY_WRITE		0x00000002
+#define MAY_READ		0x00000004
+#define MAY_APPEND		0x00000008
+#define MAY_ACCESS		0x00000010
+#define MAY_OPEN		0x00000020
+#define MAY_CHDIR		0x00000040
+/* called from RCU mode, don't block */
+#define MAY_NOT_BLOCK		0x00000080
+
+/*
+ * flags in file.f_mode.  Note that FMODE_READ and FMODE_WRITE must correspond
+ * to O_WRONLY and O_RDWR via the strange trick in __dentry_open()
+ */
+
+/* file is open for reading */
+#define FMODE_READ		((__force fmode_t)0x1)
+/* file is open for writing */
+#define FMODE_WRITE		((__force fmode_t)0x2)
+/* file is seekable */
+#define FMODE_LSEEK		((__force fmode_t)0x4)
+/* file can be accessed using pread */
+#define FMODE_PREAD		((__force fmode_t)0x8)
+/* file can be accessed using pwrite */
+#define FMODE_PWRITE		((__force fmode_t)0x10)
+/* File is opened for execution with sys_execve / sys_uselib */
+#define FMODE_EXEC		((__force fmode_t)0x20)
+/* File is opened with O_NDELAY (only set for block devices) */
+#define FMODE_NDELAY		((__force fmode_t)0x40)
+/* File is opened with O_EXCL (only set for block devices) */
+#define FMODE_EXCL		((__force fmode_t)0x80)
+/* File is opened using open(.., 3, ..) and is writeable only for ioctls
+   (specialy hack for floppy.c) */
+#define FMODE_WRITE_IOCTL	((__force fmode_t)0x100)
+/* 32bit hashes as llseek() offset (for directories) */
+#define FMODE_32BITHASH         ((__force fmode_t)0x200)
+/* 64bit hashes as llseek() offset (for directories) */
+#define FMODE_64BITHASH         ((__force fmode_t)0x400)
+
+/*
+ * Don't update ctime and mtime.
+ *
+ * Currently a special hack for the XFS open_by_handle ioctl, but we'll
+ * hopefully graduate it to a proper O_CMTIME flag supported by open(2) soon.
+ */
+#define FMODE_NOCMTIME		((__force fmode_t)0x800)
+
+/* Expect random access pattern */
+#define FMODE_RANDOM		((__force fmode_t)0x1000)
+
+/* File is huge (eg. /dev/kmem): treat loff_t as unsigned */
+#define FMODE_UNSIGNED_OFFSET	((__force fmode_t)0x2000)
+
+/* File is opened with O_PATH; almost nothing can be done with it */
+#define FMODE_PATH		((__force fmode_t)0x4000)
+
+/* File was opened by fanotify and shouldn't generate fanotify events */
+#define FMODE_NONOTIFY		((__force fmode_t)0x1000000)
+
+/*
+ * Flag for rw_copy_check_uvector and compat_rw_copy_check_uvector
+ * that indicates that they should check the contents of the iovec are
+ * valid, but not check the memory that the iovec elements
+ * points too.
+ */
+#define CHECK_IOVEC_ONLY -1
+
+#define SEL_IN		1
+#define SEL_OUT		2
+#define SEL_EX		4
+
+/* public flags for file_system_type */
+#define FS_REQUIRES_DEV 1 
+#define FS_BINARY_MOUNTDATA 2
+#define FS_HAS_SUBTYPE 4
+#define FS_REVAL_DOT	16384	/* Check the paths ".", ".." for staleness */
+#define FS_RENAME_DOES_D_MOVE	32768	/* FS will handle d_move()
+					 * during rename() internally.
+					 */
+
+/*
+ * These are the fs-independent mount-flags: up to 32 flags are supported
+ */
+#define MS_RDONLY	 1	/* Mount read-only */
+#define MS_NOSUID	 2	/* Ignore suid and sgid bits */
+#define MS_NODEV	 4	/* Disallow access to device special files */
+#define MS_NOEXEC	 8	/* Disallow program execution */
+#define MS_SYNCHRONOUS	16	/* Writes are synced at once */
+#define MS_REMOUNT	32	/* Alter flags of a mounted FS */
+#define MS_MANDLOCK	64	/* Allow mandatory locks on an FS */
+#define MS_DIRSYNC	128	/* Directory modifications are synchronous */
+#define MS_NOATIME	1024	/* Do not update access times. */
+#define MS_NODIRATIME	2048	/* Do not update directory access times */
+#define MS_BIND		4096
+#define MS_MOVE		8192
+#define MS_REC		16384
+#define MS_VERBOSE	32768	/* War is peace. Verbosity is silence.
+				   MS_VERBOSE is deprecated. */
+#define MS_SILENT	32768
+#define MS_POSIXACL	(1<<16)	/* VFS does not apply the umask */
+#define MS_UNBINDABLE	(1<<17)	/* change to unbindable */
+#define MS_PRIVATE	(1<<18)	/* change to private */
+#define MS_SLAVE	(1<<19)	/* change to slave */
+#define MS_SHARED	(1<<20)	/* change to shared */
+#define MS_RELATIME	(1<<21)	/* Update atime relative to mtime/ctime. */
+#define MS_KERNMOUNT	(1<<22) /* this is a kern_mount call */
+#define MS_I_VERSION	(1<<23) /* Update inode I_version field */
+#define MS_STRICTATIME	(1<<24) /* Always perform atime updates */
+#define MS_NOSEC	(1<<28)
+#define MS_BORN		(1<<29)
+#define MS_ACTIVE	(1<<30)
+#define MS_NOUSER	(1<<31)
+
+/*
+ * Superblock flags that can be altered by MS_REMOUNT
+ */
+#define MS_RMT_MASK	(MS_RDONLY|MS_SYNCHRONOUS|MS_MANDLOCK|MS_I_VERSION)
+
+/*
+ * Old magic mount flag and mask
+ */
+#define MS_MGC_VAL 0xC0ED0000
+#define MS_MGC_MSK 0xffff0000
+
+/* Inode flags - they have nothing to superblock flags now */
+
+#define S_SYNC		1	/* Writes are synced at once */
+#define S_NOATIME	2	/* Do not update access times */
+#define S_APPEND	4	/* Append-only file */
+#define S_IMMUTABLE	8	/* Immutable file */
+#define S_DEAD		16	/* removed, but still open directory */
+#define S_NOQUOTA	32	/* Inode is not counted to quota */
+#define S_DIRSYNC	64	/* Directory modifications are synchronous */
+#define S_NOCMTIME	128	/* Do not update file c/mtime */
+#define S_SWAPFILE	256	/* Do not truncate: swapon got its bmaps */
+#define S_PRIVATE	512	/* Inode is fs-internal */
+#define S_IMA		1024	/* Inode has an associated IMA struct */
+#define S_AUTOMOUNT	2048	/* Automount/referral quasi-directory */
+#define S_NOSEC		4096	/* no suid or xattr security attributes */
+
+/*
+ * Note that nosuid etc flags are inode-specific: setting some file-system
+ * flags just means all the inodes inherit those flags by default. It might be
+ * possible to override it selectively if you really wanted to with some
+ * ioctl() that is not currently implemented.
+ *
+ * Exception: MS_RDONLY is always applied to the entire file system.
+ *
+ * Unfortunately, it is possible to change a filesystems flags with it mounted
+ * with files in use.  This means that all of the inodes will not have their
+ * i_flags updated.  Hence, i_flags no longer inherit the superblock mount
+ * flags, so these have to be checked separately. -- rmk@arm.uk.linux.org
+ */
+#define __IS_FLG(inode,flg) ((inode)->i_sb->s_flags & (flg))
+
+#define IS_RDONLY(inode) ((inode)->i_sb->s_flags & MS_RDONLY)
+#define IS_SYNC(inode)		(__IS_FLG(inode, MS_SYNCHRONOUS) || \
+					((inode)->i_flags & S_SYNC))
+#define IS_DIRSYNC(inode)	(__IS_FLG(inode, MS_SYNCHRONOUS|MS_DIRSYNC) || \
+					((inode)->i_flags & (S_SYNC|S_DIRSYNC)))
+#define IS_MANDLOCK(inode)	__IS_FLG(inode, MS_MANDLOCK)
+#define IS_NOATIME(inode)   __IS_FLG(inode, MS_RDONLY|MS_NOATIME)
+#define IS_I_VERSION(inode)   __IS_FLG(inode, MS_I_VERSION)
+
+#define IS_NOQUOTA(inode)	((inode)->i_flags & S_NOQUOTA)
+#define IS_APPEND(inode)	((inode)->i_flags & S_APPEND)
+#define IS_IMMUTABLE(inode)	((inode)->i_flags & S_IMMUTABLE)
+#define IS_POSIXACL(inode)	__IS_FLG(inode, MS_POSIXACL)
+
+#define IS_DEADDIR(inode)	((inode)->i_flags & S_DEAD)
+#define IS_NOCMTIME(inode)	((inode)->i_flags & S_NOCMTIME)
+#define IS_SWAPFILE(inode)	((inode)->i_flags & S_SWAPFILE)
+#define IS_PRIVATE(inode)	((inode)->i_flags & S_PRIVATE)
+#define IS_IMA(inode)		((inode)->i_flags & S_IMA)
+#define IS_AUTOMOUNT(inode)	((inode)->i_flags & S_AUTOMOUNT)
+#define IS_NOSEC(inode)		((inode)->i_flags & S_NOSEC)
+
+/* the read-only stuff doesn't really belong here, but any other place is
+   probably as bad and I don't want to create yet another include file. */
+
+#define BLKROSET   _IO(0x12,93)	/* set device read-only (0 = read-write) */
+#define BLKROGET   _IO(0x12,94)	/* get read-only status (0 = read_write) */
+#define BLKRRPART  _IO(0x12,95)	/* re-read partition table */
+#define BLKGETSIZE _IO(0x12,96)	/* return device size /512 (long *arg) */
+#define BLKFLSBUF  _IO(0x12,97)	/* flush buffer cache */
+#define BLKRASET   _IO(0x12,98)	/* set read ahead for block device */
+#define BLKRAGET   _IO(0x12,99)	/* get current read ahead setting */
+#define BLKFRASET  _IO(0x12,100)/* set filesystem (mm/filemap.c) read-ahead */
+#define BLKFRAGET  _IO(0x12,101)/* get filesystem (mm/filemap.c) read-ahead */
+#define BLKSECTSET _IO(0x12,102)/* set max sectors per request (ll_rw_blk.c) */
+#define BLKSECTGET _IO(0x12,103)/* get max sectors per request (ll_rw_blk.c) */
+#define BLKSSZGET  _IO(0x12,104)/* get block device sector size */
+#if 0
+#define BLKPG      _IO(0x12,105)/* See blkpg.h */
+
+/* Some people are morons.  Do not use sizeof! */
+
+#define BLKELVGET  _IOR(0x12,106,size_t)/* elevator get */
+#define BLKELVSET  _IOW(0x12,107,size_t)/* elevator set */
+/* This was here just to show that the number is taken -
+   probably all these _IO(0x12,*) ioctls should be moved to blkpg.h. */
+#endif
+/* A jump here: 108-111 have been used for various private purposes. */
+#define BLKBSZGET  _IOR(0x12,112,size_t)
+#define BLKBSZSET  _IOW(0x12,113,size_t)
+#define BLKGETSIZE64 _IOR(0x12,114,size_t)	/* return device size in bytes (u64 *arg) */
+#define BLKTRACESETUP _IOWR(0x12,115,struct blk_user_trace_setup)
+#define BLKTRACESTART _IO(0x12,116)
+#define BLKTRACESTOP _IO(0x12,117)
+#define BLKTRACETEARDOWN _IO(0x12,118)
+#define BLKDISCARD _IO(0x12,119)
+#define BLKIOMIN _IO(0x12,120)
+#define BLKIOOPT _IO(0x12,121)
+#define BLKALIGNOFF _IO(0x12,122)
+#define BLKPBSZGET _IO(0x12,123)
+#define BLKDISCARDZEROES _IO(0x12,124)
+#define BLKSECDISCARD _IO(0x12,125)
+#define BLKROTATIONAL _IO(0x12,126)
+#define BLKZEROOUT _IO(0x12,127)
+
+#define BMAP_IOCTL 1		/* obsolete - kept for compatibility */
+#define FIBMAP	   _IO(0x00,1)	/* bmap access */
+#define FIGETBSZ   _IO(0x00,2)	/* get the block size used for bmap */
+#define FIFREEZE	_IOWR('X', 119, int)	/* Freeze */
+#define FITHAW		_IOWR('X', 120, int)	/* Thaw */
+#define FITRIM		_IOWR('X', 121, struct fstrim_range)	/* Trim */
+
+#define	FS_IOC_GETFLAGS			_IOR('f', 1, long)
+#define	FS_IOC_SETFLAGS			_IOW('f', 2, long)
+#define	FS_IOC_GETVERSION		_IOR('v', 1, long)
+#define	FS_IOC_SETVERSION		_IOW('v', 2, long)
+#define FS_IOC_FIEMAP			_IOWR('f', 11, struct fiemap)
+#define FS_IOC32_GETFLAGS		_IOR('f', 1, int)
+#define FS_IOC32_SETFLAGS		_IOW('f', 2, int)
+#define FS_IOC32_GETVERSION		_IOR('v', 1, int)
+#define FS_IOC32_SETVERSION		_IOW('v', 2, int)
+
+/*
+ * Inode flags (FS_IOC_GETFLAGS / FS_IOC_SETFLAGS)
+ */
+#define	FS_SECRM_FL			0x00000001 /* Secure deletion */
+#define	FS_UNRM_FL			0x00000002 /* Undelete */
+#define	FS_COMPR_FL			0x00000004 /* Compress file */
+#define FS_SYNC_FL			0x00000008 /* Synchronous updates */
+#define FS_IMMUTABLE_FL			0x00000010 /* Immutable file */
+#define FS_APPEND_FL			0x00000020 /* writes to file may only append */
+#define FS_NODUMP_FL			0x00000040 /* do not dump file */
+#define FS_NOATIME_FL			0x00000080 /* do not update atime */
+/* Reserved for compression usage... */
+#define FS_DIRTY_FL			0x00000100
+#define FS_COMPRBLK_FL			0x00000200 /* One or more compressed clusters */
+#define FS_NOCOMP_FL			0x00000400 /* Don't compress */
+#define FS_ECOMPR_FL			0x00000800 /* Compression error */
+/* End compression flags --- maybe not all used */
+#define FS_BTREE_FL			0x00001000 /* btree format dir */
+#define FS_INDEX_FL			0x00001000 /* hash-indexed directory */
+#define FS_IMAGIC_FL			0x00002000 /* AFS directory */
+#define FS_JOURNAL_DATA_FL		0x00004000 /* Reserved for ext3 */
+#define FS_NOTAIL_FL			0x00008000 /* file tail should not be merged */
+#define FS_DIRSYNC_FL			0x00010000 /* dirsync behaviour (directories only) */
+#define FS_TOPDIR_FL			0x00020000 /* Top of directory hierarchies*/
+#define FS_EXTENT_FL			0x00080000 /* Extents */
+#define FS_DIRECTIO_FL			0x00100000 /* Use direct i/o */
+#define FS_NOCOW_FL			0x00800000 /* Do not cow file */
+#define FS_RESERVED_FL			0x80000000 /* reserved for ext2 lib */
+
+#define FS_FL_USER_VISIBLE		0x0003DFFF /* User visible flags */
+#define FS_FL_USER_MODIFIABLE		0x000380FF /* User modifiable flags */
+
+
+#define SYNC_FILE_RANGE_WAIT_BEFORE	1
+#define SYNC_FILE_RANGE_WRITE		2
+#define SYNC_FILE_RANGE_WAIT_AFTER	4
+
+#endif /* _UAPI_LINUX_FS_H */
diff --git a/include/uapi/linux/fsl_hypervisor.h b/include/uapi/linux/fsl_hypervisor.h
new file mode 100644
index 00000000000..1bf04967fec
--- /dev/null
+++ b/include/uapi/linux/fsl_hypervisor.h
@@ -0,0 +1,220 @@
+/*
+ * Freescale hypervisor ioctl and kernel interface
+ *
+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc.
+ * Author: Timur Tabi <timur@freescale.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of this
+ * software, even if advised of the possibility of such damage.
+ *
+ * This file is used by the Freescale hypervisor management driver.  It can
+ * also be included by applications that need to communicate with the driver
+ * via the ioctl interface.
+ */
+
+#ifndef _UAPIFSL_HYPERVISOR_H
+#define _UAPIFSL_HYPERVISOR_H
+
+#include <linux/types.h>
+
+/**
+ * struct fsl_hv_ioctl_restart - restart a partition
+ * @ret: return error code from the hypervisor
+ * @partition: the ID of the partition to restart, or -1 for the
+ *             calling partition
+ *
+ * Used by FSL_HV_IOCTL_PARTITION_RESTART
+ */
+struct fsl_hv_ioctl_restart {
+	__u32 ret;
+	__u32 partition;
+};
+
+/**
+ * struct fsl_hv_ioctl_status - get a partition's status
+ * @ret: return error code from the hypervisor
+ * @partition: the ID of the partition to query, or -1 for the
+ *             calling partition
+ * @status: The returned status of the partition
+ *
+ * Used by FSL_HV_IOCTL_PARTITION_GET_STATUS
+ *
+ * Values of 'status':
+ *    0 = Stopped
+ *    1 = Running
+ *    2 = Starting
+ *    3 = Stopping
+ */
+struct fsl_hv_ioctl_status {
+	__u32 ret;
+	__u32 partition;
+	__u32 status;
+};
+
+/**
+ * struct fsl_hv_ioctl_start - start a partition
+ * @ret: return error code from the hypervisor
+ * @partition: the ID of the partition to control
+ * @entry_point: The offset within the guest IMA to start execution
+ * @load: If non-zero, reload the partition's images before starting
+ *
+ * Used by FSL_HV_IOCTL_PARTITION_START
+ */
+struct fsl_hv_ioctl_start {
+	__u32 ret;
+	__u32 partition;
+	__u32 entry_point;
+	__u32 load;
+};
+
+/**
+ * struct fsl_hv_ioctl_stop - stop a partition
+ * @ret: return error code from the hypervisor
+ * @partition: the ID of the partition to stop, or -1 for the calling
+ *             partition
+ *
+ * Used by FSL_HV_IOCTL_PARTITION_STOP
+ */
+struct fsl_hv_ioctl_stop {
+	__u32 ret;
+	__u32 partition;
+};
+
+/**
+ * struct fsl_hv_ioctl_memcpy - copy memory between partitions
+ * @ret: return error code from the hypervisor
+ * @source: the partition ID of the source partition, or -1 for this
+ *          partition
+ * @target: the partition ID of the target partition, or -1 for this
+ *          partition
+ * @reserved: reserved, must be set to 0
+ * @local_addr: user-space virtual address of a buffer in the local
+ *              partition
+ * @remote_addr: guest physical address of a buffer in the
+ *           remote partition
+ * @count: the number of bytes to copy.  Both the local and remote
+ *         buffers must be at least 'count' bytes long
+ *
+ * Used by FSL_HV_IOCTL_MEMCPY
+ *
+ * The 'local' partition is the partition that calls this ioctl.  The
+ * 'remote' partition is a different partition.  The data is copied from
+ * the 'source' paritition' to the 'target' partition.
+ *
+ * The buffer in the remote partition must be guest physically
+ * contiguous.
+ *
+ * This ioctl does not support copying memory between two remote
+ * partitions or within the same partition, so either 'source' or
+ * 'target' (but not both) must be -1.  In other words, either
+ *
+ *      source == local and target == remote
+ * or
+ *      source == remote and target == local
+ */
+struct fsl_hv_ioctl_memcpy {
+	__u32 ret;
+	__u32 source;
+	__u32 target;
+	__u32 reserved;	/* padding to ensure local_vaddr is aligned */
+	__u64 local_vaddr;
+	__u64 remote_paddr;
+	__u64 count;
+};
+
+/**
+ * struct fsl_hv_ioctl_doorbell - ring a doorbell
+ * @ret: return error code from the hypervisor
+ * @doorbell: the handle of the doorbell to ring doorbell
+ *
+ * Used by FSL_HV_IOCTL_DOORBELL
+ */
+struct fsl_hv_ioctl_doorbell {
+	__u32 ret;
+	__u32 doorbell;
+};
+
+/**
+ * struct fsl_hv_ioctl_prop - get/set a device tree property
+ * @ret: return error code from the hypervisor
+ * @handle: handle of partition whose tree to access
+ * @path: virtual address of path name of node to access
+ * @propname: virtual address of name of property to access
+ * @propval: virtual address of property data buffer
+ * @proplen: Size of property data buffer
+ * @reserved: reserved, must be set to 0
+ *
+ * Used by FSL_HV_IOCTL_DOORBELL
+ */
+struct fsl_hv_ioctl_prop {
+	__u32 ret;
+	__u32 handle;
+	__u64 path;
+	__u64 propname;
+	__u64 propval;
+	__u32 proplen;
+	__u32 reserved;	/* padding to ensure structure is aligned */
+};
+
+/* The ioctl type, documented in ioctl-number.txt */
+#define FSL_HV_IOCTL_TYPE	0xAF
+
+/* Restart another partition */
+#define FSL_HV_IOCTL_PARTITION_RESTART \
+	_IOWR(FSL_HV_IOCTL_TYPE, 1, struct fsl_hv_ioctl_restart)
+
+/* Get a partition's status */
+#define FSL_HV_IOCTL_PARTITION_GET_STATUS \
+	_IOWR(FSL_HV_IOCTL_TYPE, 2, struct fsl_hv_ioctl_status)
+
+/* Boot another partition */
+#define FSL_HV_IOCTL_PARTITION_START \
+	_IOWR(FSL_HV_IOCTL_TYPE, 3, struct fsl_hv_ioctl_start)
+
+/* Stop this or another partition */
+#define FSL_HV_IOCTL_PARTITION_STOP \
+	_IOWR(FSL_HV_IOCTL_TYPE, 4, struct fsl_hv_ioctl_stop)
+
+/* Copy data from one partition to another */
+#define FSL_HV_IOCTL_MEMCPY \
+	_IOWR(FSL_HV_IOCTL_TYPE, 5, struct fsl_hv_ioctl_memcpy)
+
+/* Ring a doorbell */
+#define FSL_HV_IOCTL_DOORBELL \
+	_IOWR(FSL_HV_IOCTL_TYPE, 6, struct fsl_hv_ioctl_doorbell)
+
+/* Get a property from another guest's device tree */
+#define FSL_HV_IOCTL_GETPROP \
+	_IOWR(FSL_HV_IOCTL_TYPE, 7, struct fsl_hv_ioctl_prop)
+
+/* Set a property in another guest's device tree */
+#define FSL_HV_IOCTL_SETPROP \
+	_IOWR(FSL_HV_IOCTL_TYPE, 8, struct fsl_hv_ioctl_prop)
+
+
+#endif /* _UAPIFSL_HYPERVISOR_H */
diff --git a/include/uapi/linux/fuse.h b/include/uapi/linux/fuse.h
new file mode 100644
index 00000000000..d8c713e148e
--- /dev/null
+++ b/include/uapi/linux/fuse.h
@@ -0,0 +1,677 @@
+/*
+    FUSE: Filesystem in Userspace
+    Copyright (C) 2001-2008  Miklos Szeredi <miklos@szeredi.hu>
+
+    This program can be distributed under the terms of the GNU GPL.
+    See the file COPYING.
+*/
+
+/*
+ * This file defines the kernel interface of FUSE
+ *
+ * Protocol changelog:
+ *
+ * 7.9:
+ *  - new fuse_getattr_in input argument of GETATTR
+ *  - add lk_flags in fuse_lk_in
+ *  - add lock_owner field to fuse_setattr_in, fuse_read_in and fuse_write_in
+ *  - add blksize field to fuse_attr
+ *  - add file flags field to fuse_read_in and fuse_write_in
+ *
+ * 7.10
+ *  - add nonseekable open flag
+ *
+ * 7.11
+ *  - add IOCTL message
+ *  - add unsolicited notification support
+ *  - add POLL message and NOTIFY_POLL notification
+ *
+ * 7.12
+ *  - add umask flag to input argument of open, mknod and mkdir
+ *  - add notification messages for invalidation of inodes and
+ *    directory entries
+ *
+ * 7.13
+ *  - make max number of background requests and congestion threshold
+ *    tunables
+ *
+ * 7.14
+ *  - add splice support to fuse device
+ *
+ * 7.15
+ *  - add store notify
+ *  - add retrieve notify
+ *
+ * 7.16
+ *  - add BATCH_FORGET request
+ *  - FUSE_IOCTL_UNRESTRICTED shall now return with array of 'struct
+ *    fuse_ioctl_iovec' instead of ambiguous 'struct iovec'
+ *  - add FUSE_IOCTL_32BIT flag
+ *
+ * 7.17
+ *  - add FUSE_FLOCK_LOCKS and FUSE_RELEASE_FLOCK_UNLOCK
+ *
+ * 7.18
+ *  - add FUSE_IOCTL_DIR flag
+ *  - add FUSE_NOTIFY_DELETE
+ *
+ * 7.19
+ *  - add FUSE_FALLOCATE
+ *
+ * 7.20
+ *  - add FUSE_AUTO_INVAL_DATA
+ */
+
+#ifndef _LINUX_FUSE_H
+#define _LINUX_FUSE_H
+
+#include <linux/types.h>
+
+/*
+ * Version negotiation:
+ *
+ * Both the kernel and userspace send the version they support in the
+ * INIT request and reply respectively.
+ *
+ * If the major versions match then both shall use the smallest
+ * of the two minor versions for communication.
+ *
+ * If the kernel supports a larger major version, then userspace shall
+ * reply with the major version it supports, ignore the rest of the
+ * INIT message and expect a new INIT message from the kernel with a
+ * matching major version.
+ *
+ * If the library supports a larger major version, then it shall fall
+ * back to the major protocol version sent by the kernel for
+ * communication and reply with that major version (and an arbitrary
+ * supported minor version).
+ */
+
+/** Version number of this interface */
+#define FUSE_KERNEL_VERSION 7
+
+/** Minor version number of this interface */
+#define FUSE_KERNEL_MINOR_VERSION 20
+
+/** The node ID of the root inode */
+#define FUSE_ROOT_ID 1
+
+/* Make sure all structures are padded to 64bit boundary, so 32bit
+   userspace works under 64bit kernels */
+
+struct fuse_attr {
+	__u64	ino;
+	__u64	size;
+	__u64	blocks;
+	__u64	atime;
+	__u64	mtime;
+	__u64	ctime;
+	__u32	atimensec;
+	__u32	mtimensec;
+	__u32	ctimensec;
+	__u32	mode;
+	__u32	nlink;
+	__u32	uid;
+	__u32	gid;
+	__u32	rdev;
+	__u32	blksize;
+	__u32	padding;
+};
+
+struct fuse_kstatfs {
+	__u64	blocks;
+	__u64	bfree;
+	__u64	bavail;
+	__u64	files;
+	__u64	ffree;
+	__u32	bsize;
+	__u32	namelen;
+	__u32	frsize;
+	__u32	padding;
+	__u32	spare[6];
+};
+
+struct fuse_file_lock {
+	__u64	start;
+	__u64	end;
+	__u32	type;
+	__u32	pid; /* tgid */
+};
+
+/**
+ * Bitmasks for fuse_setattr_in.valid
+ */
+#define FATTR_MODE	(1 << 0)
+#define FATTR_UID	(1 << 1)
+#define FATTR_GID	(1 << 2)
+#define FATTR_SIZE	(1 << 3)
+#define FATTR_ATIME	(1 << 4)
+#define FATTR_MTIME	(1 << 5)
+#define FATTR_FH	(1 << 6)
+#define FATTR_ATIME_NOW	(1 << 7)
+#define FATTR_MTIME_NOW	(1 << 8)
+#define FATTR_LOCKOWNER	(1 << 9)
+
+/**
+ * Flags returned by the OPEN request
+ *
+ * FOPEN_DIRECT_IO: bypass page cache for this open file
+ * FOPEN_KEEP_CACHE: don't invalidate the data cache on open
+ * FOPEN_NONSEEKABLE: the file is not seekable
+ */
+#define FOPEN_DIRECT_IO		(1 << 0)
+#define FOPEN_KEEP_CACHE	(1 << 1)
+#define FOPEN_NONSEEKABLE	(1 << 2)
+
+/**
+ * INIT request/reply flags
+ *
+ * FUSE_ASYNC_READ: asynchronous read requests
+ * FUSE_POSIX_LOCKS: remote locking for POSIX file locks
+ * FUSE_FILE_OPS: kernel sends file handle for fstat, etc... (not yet supported)
+ * FUSE_ATOMIC_O_TRUNC: handles the O_TRUNC open flag in the filesystem
+ * FUSE_EXPORT_SUPPORT: filesystem handles lookups of "." and ".."
+ * FUSE_BIG_WRITES: filesystem can handle write size larger than 4kB
+ * FUSE_DONT_MASK: don't apply umask to file mode on create operations
+ * FUSE_SPLICE_WRITE: kernel supports splice write on the device
+ * FUSE_SPLICE_MOVE: kernel supports splice move on the device
+ * FUSE_SPLICE_READ: kernel supports splice read on the device
+ * FUSE_FLOCK_LOCKS: remote locking for BSD style file locks
+ * FUSE_HAS_IOCTL_DIR: kernel supports ioctl on directories
+ * FUSE_AUTO_INVAL_DATA: automatically invalidate cached pages
+ */
+#define FUSE_ASYNC_READ		(1 << 0)
+#define FUSE_POSIX_LOCKS	(1 << 1)
+#define FUSE_FILE_OPS		(1 << 2)
+#define FUSE_ATOMIC_O_TRUNC	(1 << 3)
+#define FUSE_EXPORT_SUPPORT	(1 << 4)
+#define FUSE_BIG_WRITES		(1 << 5)
+#define FUSE_DONT_MASK		(1 << 6)
+#define FUSE_SPLICE_WRITE	(1 << 7)
+#define FUSE_SPLICE_MOVE	(1 << 8)
+#define FUSE_SPLICE_READ	(1 << 9)
+#define FUSE_FLOCK_LOCKS	(1 << 10)
+#define FUSE_HAS_IOCTL_DIR	(1 << 11)
+#define FUSE_AUTO_INVAL_DATA	(1 << 12)
+
+/**
+ * CUSE INIT request/reply flags
+ *
+ * CUSE_UNRESTRICTED_IOCTL:  use unrestricted ioctl
+ */
+#define CUSE_UNRESTRICTED_IOCTL	(1 << 0)
+
+/**
+ * Release flags
+ */
+#define FUSE_RELEASE_FLUSH	(1 << 0)
+#define FUSE_RELEASE_FLOCK_UNLOCK	(1 << 1)
+
+/**
+ * Getattr flags
+ */
+#define FUSE_GETATTR_FH		(1 << 0)
+
+/**
+ * Lock flags
+ */
+#define FUSE_LK_FLOCK		(1 << 0)
+
+/**
+ * WRITE flags
+ *
+ * FUSE_WRITE_CACHE: delayed write from page cache, file handle is guessed
+ * FUSE_WRITE_LOCKOWNER: lock_owner field is valid
+ */
+#define FUSE_WRITE_CACHE	(1 << 0)
+#define FUSE_WRITE_LOCKOWNER	(1 << 1)
+
+/**
+ * Read flags
+ */
+#define FUSE_READ_LOCKOWNER	(1 << 1)
+
+/**
+ * Ioctl flags
+ *
+ * FUSE_IOCTL_COMPAT: 32bit compat ioctl on 64bit machine
+ * FUSE_IOCTL_UNRESTRICTED: not restricted to well-formed ioctls, retry allowed
+ * FUSE_IOCTL_RETRY: retry with new iovecs
+ * FUSE_IOCTL_32BIT: 32bit ioctl
+ * FUSE_IOCTL_DIR: is a directory
+ *
+ * FUSE_IOCTL_MAX_IOV: maximum of in_iovecs + out_iovecs
+ */
+#define FUSE_IOCTL_COMPAT	(1 << 0)
+#define FUSE_IOCTL_UNRESTRICTED	(1 << 1)
+#define FUSE_IOCTL_RETRY	(1 << 2)
+#define FUSE_IOCTL_32BIT	(1 << 3)
+#define FUSE_IOCTL_DIR		(1 << 4)
+
+#define FUSE_IOCTL_MAX_IOV	256
+
+/**
+ * Poll flags
+ *
+ * FUSE_POLL_SCHEDULE_NOTIFY: request poll notify
+ */
+#define FUSE_POLL_SCHEDULE_NOTIFY (1 << 0)
+
+enum fuse_opcode {
+	FUSE_LOOKUP	   = 1,
+	FUSE_FORGET	   = 2,  /* no reply */
+	FUSE_GETATTR	   = 3,
+	FUSE_SETATTR	   = 4,
+	FUSE_READLINK	   = 5,
+	FUSE_SYMLINK	   = 6,
+	FUSE_MKNOD	   = 8,
+	FUSE_MKDIR	   = 9,
+	FUSE_UNLINK	   = 10,
+	FUSE_RMDIR	   = 11,
+	FUSE_RENAME	   = 12,
+	FUSE_LINK	   = 13,
+	FUSE_OPEN	   = 14,
+	FUSE_READ	   = 15,
+	FUSE_WRITE	   = 16,
+	FUSE_STATFS	   = 17,
+	FUSE_RELEASE       = 18,
+	FUSE_FSYNC         = 20,
+	FUSE_SETXATTR      = 21,
+	FUSE_GETXATTR      = 22,
+	FUSE_LISTXATTR     = 23,
+	FUSE_REMOVEXATTR   = 24,
+	FUSE_FLUSH         = 25,
+	FUSE_INIT          = 26,
+	FUSE_OPENDIR       = 27,
+	FUSE_READDIR       = 28,
+	FUSE_RELEASEDIR    = 29,
+	FUSE_FSYNCDIR      = 30,
+	FUSE_GETLK         = 31,
+	FUSE_SETLK         = 32,
+	FUSE_SETLKW        = 33,
+	FUSE_ACCESS        = 34,
+	FUSE_CREATE        = 35,
+	FUSE_INTERRUPT     = 36,
+	FUSE_BMAP          = 37,
+	FUSE_DESTROY       = 38,
+	FUSE_IOCTL         = 39,
+	FUSE_POLL          = 40,
+	FUSE_NOTIFY_REPLY  = 41,
+	FUSE_BATCH_FORGET  = 42,
+	FUSE_FALLOCATE     = 43,
+
+	/* CUSE specific operations */
+	CUSE_INIT          = 4096,
+};
+
+enum fuse_notify_code {
+	FUSE_NOTIFY_POLL   = 1,
+	FUSE_NOTIFY_INVAL_INODE = 2,
+	FUSE_NOTIFY_INVAL_ENTRY = 3,
+	FUSE_NOTIFY_STORE = 4,
+	FUSE_NOTIFY_RETRIEVE = 5,
+	FUSE_NOTIFY_DELETE = 6,
+	FUSE_NOTIFY_CODE_MAX,
+};
+
+/* The read buffer is required to be at least 8k, but may be much larger */
+#define FUSE_MIN_READ_BUFFER 8192
+
+#define FUSE_COMPAT_ENTRY_OUT_SIZE 120
+
+struct fuse_entry_out {
+	__u64	nodeid;		/* Inode ID */
+	__u64	generation;	/* Inode generation: nodeid:gen must
+				   be unique for the fs's lifetime */
+	__u64	entry_valid;	/* Cache timeout for the name */
+	__u64	attr_valid;	/* Cache timeout for the attributes */
+	__u32	entry_valid_nsec;
+	__u32	attr_valid_nsec;
+	struct fuse_attr attr;
+};
+
+struct fuse_forget_in {
+	__u64	nlookup;
+};
+
+struct fuse_forget_one {
+	__u64	nodeid;
+	__u64	nlookup;
+};
+
+struct fuse_batch_forget_in {
+	__u32	count;
+	__u32	dummy;
+};
+
+struct fuse_getattr_in {
+	__u32	getattr_flags;
+	__u32	dummy;
+	__u64	fh;
+};
+
+#define FUSE_COMPAT_ATTR_OUT_SIZE 96
+
+struct fuse_attr_out {
+	__u64	attr_valid;	/* Cache timeout for the attributes */
+	__u32	attr_valid_nsec;
+	__u32	dummy;
+	struct fuse_attr attr;
+};
+
+#define FUSE_COMPAT_MKNOD_IN_SIZE 8
+
+struct fuse_mknod_in {
+	__u32	mode;
+	__u32	rdev;
+	__u32	umask;
+	__u32	padding;
+};
+
+struct fuse_mkdir_in {
+	__u32	mode;
+	__u32	umask;
+};
+
+struct fuse_rename_in {
+	__u64	newdir;
+};
+
+struct fuse_link_in {
+	__u64	oldnodeid;
+};
+
+struct fuse_setattr_in {
+	__u32	valid;
+	__u32	padding;
+	__u64	fh;
+	__u64	size;
+	__u64	lock_owner;
+	__u64	atime;
+	__u64	mtime;
+	__u64	unused2;
+	__u32	atimensec;
+	__u32	mtimensec;
+	__u32	unused3;
+	__u32	mode;
+	__u32	unused4;
+	__u32	uid;
+	__u32	gid;
+	__u32	unused5;
+};
+
+struct fuse_open_in {
+	__u32	flags;
+	__u32	unused;
+};
+
+struct fuse_create_in {
+	__u32	flags;
+	__u32	mode;
+	__u32	umask;
+	__u32	padding;
+};
+
+struct fuse_open_out {
+	__u64	fh;
+	__u32	open_flags;
+	__u32	padding;
+};
+
+struct fuse_release_in {
+	__u64	fh;
+	__u32	flags;
+	__u32	release_flags;
+	__u64	lock_owner;
+};
+
+struct fuse_flush_in {
+	__u64	fh;
+	__u32	unused;
+	__u32	padding;
+	__u64	lock_owner;
+};
+
+struct fuse_read_in {
+	__u64	fh;
+	__u64	offset;
+	__u32	size;
+	__u32	read_flags;
+	__u64	lock_owner;
+	__u32	flags;
+	__u32	padding;
+};
+
+#define FUSE_COMPAT_WRITE_IN_SIZE 24
+
+struct fuse_write_in {
+	__u64	fh;
+	__u64	offset;
+	__u32	size;
+	__u32	write_flags;
+	__u64	lock_owner;
+	__u32	flags;
+	__u32	padding;
+};
+
+struct fuse_write_out {
+	__u32	size;
+	__u32	padding;
+};
+
+#define FUSE_COMPAT_STATFS_SIZE 48
+
+struct fuse_statfs_out {
+	struct fuse_kstatfs st;
+};
+
+struct fuse_fsync_in {
+	__u64	fh;
+	__u32	fsync_flags;
+	__u32	padding;
+};
+
+struct fuse_setxattr_in {
+	__u32	size;
+	__u32	flags;
+};
+
+struct fuse_getxattr_in {
+	__u32	size;
+	__u32	padding;
+};
+
+struct fuse_getxattr_out {
+	__u32	size;
+	__u32	padding;
+};
+
+struct fuse_lk_in {
+	__u64	fh;
+	__u64	owner;
+	struct fuse_file_lock lk;
+	__u32	lk_flags;
+	__u32	padding;
+};
+
+struct fuse_lk_out {
+	struct fuse_file_lock lk;
+};
+
+struct fuse_access_in {
+	__u32	mask;
+	__u32	padding;
+};
+
+struct fuse_init_in {
+	__u32	major;
+	__u32	minor;
+	__u32	max_readahead;
+	__u32	flags;
+};
+
+struct fuse_init_out {
+	__u32	major;
+	__u32	minor;
+	__u32	max_readahead;
+	__u32	flags;
+	__u16   max_background;
+	__u16   congestion_threshold;
+	__u32	max_write;
+};
+
+#define CUSE_INIT_INFO_MAX 4096
+
+struct cuse_init_in {
+	__u32	major;
+	__u32	minor;
+	__u32	unused;
+	__u32	flags;
+};
+
+struct cuse_init_out {
+	__u32	major;
+	__u32	minor;
+	__u32	unused;
+	__u32	flags;
+	__u32	max_read;
+	__u32	max_write;
+	__u32	dev_major;		/* chardev major */
+	__u32	dev_minor;		/* chardev minor */
+	__u32	spare[10];
+};
+
+struct fuse_interrupt_in {
+	__u64	unique;
+};
+
+struct fuse_bmap_in {
+	__u64	block;
+	__u32	blocksize;
+	__u32	padding;
+};
+
+struct fuse_bmap_out {
+	__u64	block;
+};
+
+struct fuse_ioctl_in {
+	__u64	fh;
+	__u32	flags;
+	__u32	cmd;
+	__u64	arg;
+	__u32	in_size;
+	__u32	out_size;
+};
+
+struct fuse_ioctl_iovec {
+	__u64	base;
+	__u64	len;
+};
+
+struct fuse_ioctl_out {
+	__s32	result;
+	__u32	flags;
+	__u32	in_iovs;
+	__u32	out_iovs;
+};
+
+struct fuse_poll_in {
+	__u64	fh;
+	__u64	kh;
+	__u32	flags;
+	__u32   padding;
+};
+
+struct fuse_poll_out {
+	__u32	revents;
+	__u32	padding;
+};
+
+struct fuse_notify_poll_wakeup_out {
+	__u64	kh;
+};
+
+struct fuse_fallocate_in {
+	__u64	fh;
+	__u64	offset;
+	__u64	length;
+	__u32	mode;
+	__u32	padding;
+};
+
+struct fuse_in_header {
+	__u32	len;
+	__u32	opcode;
+	__u64	unique;
+	__u64	nodeid;
+	__u32	uid;
+	__u32	gid;
+	__u32	pid;
+	__u32	padding;
+};
+
+struct fuse_out_header {
+	__u32	len;
+	__s32	error;
+	__u64	unique;
+};
+
+struct fuse_dirent {
+	__u64	ino;
+	__u64	off;
+	__u32	namelen;
+	__u32	type;
+	char name[];
+};
+
+#define FUSE_NAME_OFFSET offsetof(struct fuse_dirent, name)
+#define FUSE_DIRENT_ALIGN(x) (((x) + sizeof(__u64) - 1) & ~(sizeof(__u64) - 1))
+#define FUSE_DIRENT_SIZE(d) \
+	FUSE_DIRENT_ALIGN(FUSE_NAME_OFFSET + (d)->namelen)
+
+struct fuse_notify_inval_inode_out {
+	__u64	ino;
+	__s64	off;
+	__s64	len;
+};
+
+struct fuse_notify_inval_entry_out {
+	__u64	parent;
+	__u32	namelen;
+	__u32	padding;
+};
+
+struct fuse_notify_delete_out {
+	__u64	parent;
+	__u64	child;
+	__u32	namelen;
+	__u32	padding;
+};
+
+struct fuse_notify_store_out {
+	__u64	nodeid;
+	__u64	offset;
+	__u32	size;
+	__u32	padding;
+};
+
+struct fuse_notify_retrieve_out {
+	__u64	notify_unique;
+	__u64	nodeid;
+	__u64	offset;
+	__u32	size;
+	__u32	padding;
+};
+
+/* Matches the size of fuse_write_in */
+struct fuse_notify_retrieve_in {
+	__u64	dummy1;
+	__u64	offset;
+	__u32	size;
+	__u32	dummy2;
+	__u64	dummy3;
+	__u64	dummy4;
+};
+
+#endif /* _LINUX_FUSE_H */
diff --git a/include/uapi/linux/futex.h b/include/uapi/linux/futex.h
new file mode 100644
index 00000000000..0b1f716373c
--- /dev/null
+++ b/include/uapi/linux/futex.h
@@ -0,0 +1,152 @@
+#ifndef _UAPI_LINUX_FUTEX_H
+#define _UAPI_LINUX_FUTEX_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+/* Second argument to futex syscall */
+
+
+#define FUTEX_WAIT		0
+#define FUTEX_WAKE		1
+#define FUTEX_FD		2
+#define FUTEX_REQUEUE		3
+#define FUTEX_CMP_REQUEUE	4
+#define FUTEX_WAKE_OP		5
+#define FUTEX_LOCK_PI		6
+#define FUTEX_UNLOCK_PI		7
+#define FUTEX_TRYLOCK_PI	8
+#define FUTEX_WAIT_BITSET	9
+#define FUTEX_WAKE_BITSET	10
+#define FUTEX_WAIT_REQUEUE_PI	11
+#define FUTEX_CMP_REQUEUE_PI	12
+
+#define FUTEX_PRIVATE_FLAG	128
+#define FUTEX_CLOCK_REALTIME	256
+#define FUTEX_CMD_MASK		~(FUTEX_PRIVATE_FLAG | FUTEX_CLOCK_REALTIME)
+
+#define FUTEX_WAIT_PRIVATE	(FUTEX_WAIT | FUTEX_PRIVATE_FLAG)
+#define FUTEX_WAKE_PRIVATE	(FUTEX_WAKE | FUTEX_PRIVATE_FLAG)
+#define FUTEX_REQUEUE_PRIVATE	(FUTEX_REQUEUE | FUTEX_PRIVATE_FLAG)
+#define FUTEX_CMP_REQUEUE_PRIVATE (FUTEX_CMP_REQUEUE | FUTEX_PRIVATE_FLAG)
+#define FUTEX_WAKE_OP_PRIVATE	(FUTEX_WAKE_OP | FUTEX_PRIVATE_FLAG)
+#define FUTEX_LOCK_PI_PRIVATE	(FUTEX_LOCK_PI | FUTEX_PRIVATE_FLAG)
+#define FUTEX_UNLOCK_PI_PRIVATE	(FUTEX_UNLOCK_PI | FUTEX_PRIVATE_FLAG)
+#define FUTEX_TRYLOCK_PI_PRIVATE (FUTEX_TRYLOCK_PI | FUTEX_PRIVATE_FLAG)
+#define FUTEX_WAIT_BITSET_PRIVATE	(FUTEX_WAIT_BITSET | FUTEX_PRIVATE_FLAG)
+#define FUTEX_WAKE_BITSET_PRIVATE	(FUTEX_WAKE_BITSET | FUTEX_PRIVATE_FLAG)
+#define FUTEX_WAIT_REQUEUE_PI_PRIVATE	(FUTEX_WAIT_REQUEUE_PI | \
+					 FUTEX_PRIVATE_FLAG)
+#define FUTEX_CMP_REQUEUE_PI_PRIVATE	(FUTEX_CMP_REQUEUE_PI | \
+					 FUTEX_PRIVATE_FLAG)
+
+/*
+ * Support for robust futexes: the kernel cleans up held futexes at
+ * thread exit time.
+ */
+
+/*
+ * Per-lock list entry - embedded in user-space locks, somewhere close
+ * to the futex field. (Note: user-space uses a double-linked list to
+ * achieve O(1) list add and remove, but the kernel only needs to know
+ * about the forward link)
+ *
+ * NOTE: this structure is part of the syscall ABI, and must not be
+ * changed.
+ */
+struct robust_list {
+	struct robust_list __user *next;
+};
+
+/*
+ * Per-thread list head:
+ *
+ * NOTE: this structure is part of the syscall ABI, and must only be
+ * changed if the change is first communicated with the glibc folks.
+ * (When an incompatible change is done, we'll increase the structure
+ *  size, which glibc will detect)
+ */
+struct robust_list_head {
+	/*
+	 * The head of the list. Points back to itself if empty:
+	 */
+	struct robust_list list;
+
+	/*
+	 * This relative offset is set by user-space, it gives the kernel
+	 * the relative position of the futex field to examine. This way
+	 * we keep userspace flexible, to freely shape its data-structure,
+	 * without hardcoding any particular offset into the kernel:
+	 */
+	long futex_offset;
+
+	/*
+	 * The death of the thread may race with userspace setting
+	 * up a lock's links. So to handle this race, userspace first
+	 * sets this field to the address of the to-be-taken lock,
+	 * then does the lock acquire, and then adds itself to the
+	 * list, and then clears this field. Hence the kernel will
+	 * always have full knowledge of all locks that the thread
+	 * _might_ have taken. We check the owner TID in any case,
+	 * so only truly owned locks will be handled.
+	 */
+	struct robust_list __user *list_op_pending;
+};
+
+/*
+ * Are there any waiters for this robust futex:
+ */
+#define FUTEX_WAITERS		0x80000000
+
+/*
+ * The kernel signals via this bit that a thread holding a futex
+ * has exited without unlocking the futex. The kernel also does
+ * a FUTEX_WAKE on such futexes, after setting the bit, to wake
+ * up any possible waiters:
+ */
+#define FUTEX_OWNER_DIED	0x40000000
+
+/*
+ * The rest of the robust-futex field is for the TID:
+ */
+#define FUTEX_TID_MASK		0x3fffffff
+
+/*
+ * This limit protects against a deliberately circular list.
+ * (Not worth introducing an rlimit for it)
+ */
+#define ROBUST_LIST_LIMIT	2048
+
+/*
+ * bitset with all bits set for the FUTEX_xxx_BITSET OPs to request a
+ * match of any bit.
+ */
+#define FUTEX_BITSET_MATCH_ANY	0xffffffff
+
+
+#define FUTEX_OP_SET		0	/* *(int *)UADDR2 = OPARG; */
+#define FUTEX_OP_ADD		1	/* *(int *)UADDR2 += OPARG; */
+#define FUTEX_OP_OR		2	/* *(int *)UADDR2 |= OPARG; */
+#define FUTEX_OP_ANDN		3	/* *(int *)UADDR2 &= ~OPARG; */
+#define FUTEX_OP_XOR		4	/* *(int *)UADDR2 ^= OPARG; */
+
+#define FUTEX_OP_OPARG_SHIFT	8	/* Use (1 << OPARG) instead of OPARG.  */
+
+#define FUTEX_OP_CMP_EQ		0	/* if (oldval == CMPARG) wake */
+#define FUTEX_OP_CMP_NE		1	/* if (oldval != CMPARG) wake */
+#define FUTEX_OP_CMP_LT		2	/* if (oldval < CMPARG) wake */
+#define FUTEX_OP_CMP_LE		3	/* if (oldval <= CMPARG) wake */
+#define FUTEX_OP_CMP_GT		4	/* if (oldval > CMPARG) wake */
+#define FUTEX_OP_CMP_GE		5	/* if (oldval >= CMPARG) wake */
+
+/* FUTEX_WAKE_OP will perform atomically
+   int oldval = *(int *)UADDR2;
+   *(int *)UADDR2 = oldval OP OPARG;
+   if (oldval CMP CMPARG)
+     wake UADDR2;  */
+
+#define FUTEX_OP(op, oparg, cmp, cmparg) \
+  (((op & 0xf) << 28) | ((cmp & 0xf) << 24)		\
+   | ((oparg & 0xfff) << 12) | (cmparg & 0xfff))
+
+#endif /* _UAPI_LINUX_FUTEX_H */
diff --git a/include/uapi/linux/gameport.h b/include/uapi/linux/gameport.h
new file mode 100644
index 00000000000..49b29b068f4
--- /dev/null
+++ b/include/uapi/linux/gameport.h
@@ -0,0 +1,28 @@
+/*
+ *  Copyright (c) 1999-2002 Vojtech Pavlik
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef _UAPI_GAMEPORT_H
+#define _UAPI_GAMEPORT_H
+
+
+
+#define GAMEPORT_MODE_DISABLED		0
+#define GAMEPORT_MODE_RAW		1
+#define GAMEPORT_MODE_COOKED		2
+
+#define GAMEPORT_ID_VENDOR_ANALOG	0x0001
+#define GAMEPORT_ID_VENDOR_MADCATZ	0x0002
+#define GAMEPORT_ID_VENDOR_LOGITECH	0x0003
+#define GAMEPORT_ID_VENDOR_CREATIVE	0x0004
+#define GAMEPORT_ID_VENDOR_GENIUS	0x0005
+#define GAMEPORT_ID_VENDOR_INTERACT	0x0006
+#define GAMEPORT_ID_VENDOR_MICROSOFT	0x0007
+#define GAMEPORT_ID_VENDOR_THRUSTMASTER	0x0008
+#define GAMEPORT_ID_VENDOR_GRAVIS	0x0009
+#define GAMEPORT_ID_VENDOR_GUILLEMOT	0x000a
+
+#endif /* _UAPI_GAMEPORT_H */
diff --git a/include/uapi/linux/gen_stats.h b/include/uapi/linux/gen_stats.h
new file mode 100644
index 00000000000..552c8a0a12d
--- /dev/null
+++ b/include/uapi/linux/gen_stats.h
@@ -0,0 +1,67 @@
+#ifndef __LINUX_GEN_STATS_H
+#define __LINUX_GEN_STATS_H
+
+#include <linux/types.h>
+
+enum {
+	TCA_STATS_UNSPEC,
+	TCA_STATS_BASIC,
+	TCA_STATS_RATE_EST,
+	TCA_STATS_QUEUE,
+	TCA_STATS_APP,
+	__TCA_STATS_MAX,
+};
+#define TCA_STATS_MAX (__TCA_STATS_MAX - 1)
+
+/**
+ * struct gnet_stats_basic - byte/packet throughput statistics
+ * @bytes: number of seen bytes
+ * @packets: number of seen packets
+ */
+struct gnet_stats_basic {
+	__u64	bytes;
+	__u32	packets;
+};
+struct gnet_stats_basic_packed {
+	__u64	bytes;
+	__u32	packets;
+} __attribute__ ((packed));
+
+/**
+ * struct gnet_stats_rate_est - rate estimator
+ * @bps: current byte rate
+ * @pps: current packet rate
+ */
+struct gnet_stats_rate_est {
+	__u32	bps;
+	__u32	pps;
+};
+
+/**
+ * struct gnet_stats_queue - queuing statistics
+ * @qlen: queue length
+ * @backlog: backlog size of queue
+ * @drops: number of dropped packets
+ * @requeues: number of requeues
+ * @overlimits: number of enqueues over the limit
+ */
+struct gnet_stats_queue {
+	__u32	qlen;
+	__u32	backlog;
+	__u32	drops;
+	__u32	requeues;
+	__u32	overlimits;
+};
+
+/**
+ * struct gnet_estimator - rate estimator configuration
+ * @interval: sampling period
+ * @ewma_log: the log of measurement window weight
+ */
+struct gnet_estimator {
+	signed char	interval;
+	unsigned char	ewma_log;
+};
+
+
+#endif /* __LINUX_GEN_STATS_H */
diff --git a/include/uapi/linux/genetlink.h b/include/uapi/linux/genetlink.h
new file mode 100644
index 00000000000..c880a417d8a
--- /dev/null
+++ b/include/uapi/linux/genetlink.h
@@ -0,0 +1,84 @@
+#ifndef _UAPI__LINUX_GENERIC_NETLINK_H
+#define _UAPI__LINUX_GENERIC_NETLINK_H
+
+#include <linux/types.h>
+#include <linux/netlink.h>
+
+#define GENL_NAMSIZ	16	/* length of family name */
+
+#define GENL_MIN_ID	NLMSG_MIN_TYPE
+#define GENL_MAX_ID	1023
+
+struct genlmsghdr {
+	__u8	cmd;
+	__u8	version;
+	__u16	reserved;
+};
+
+#define GENL_HDRLEN	NLMSG_ALIGN(sizeof(struct genlmsghdr))
+
+#define GENL_ADMIN_PERM		0x01
+#define GENL_CMD_CAP_DO		0x02
+#define GENL_CMD_CAP_DUMP	0x04
+#define GENL_CMD_CAP_HASPOL	0x08
+
+/*
+ * List of reserved static generic netlink identifiers:
+ */
+#define GENL_ID_GENERATE	0
+#define GENL_ID_CTRL		NLMSG_MIN_TYPE
+
+/**************************************************************************
+ * Controller
+ **************************************************************************/
+
+enum {
+	CTRL_CMD_UNSPEC,
+	CTRL_CMD_NEWFAMILY,
+	CTRL_CMD_DELFAMILY,
+	CTRL_CMD_GETFAMILY,
+	CTRL_CMD_NEWOPS,
+	CTRL_CMD_DELOPS,
+	CTRL_CMD_GETOPS,
+	CTRL_CMD_NEWMCAST_GRP,
+	CTRL_CMD_DELMCAST_GRP,
+	CTRL_CMD_GETMCAST_GRP, /* unused */
+	__CTRL_CMD_MAX,
+};
+
+#define CTRL_CMD_MAX (__CTRL_CMD_MAX - 1)
+
+enum {
+	CTRL_ATTR_UNSPEC,
+	CTRL_ATTR_FAMILY_ID,
+	CTRL_ATTR_FAMILY_NAME,
+	CTRL_ATTR_VERSION,
+	CTRL_ATTR_HDRSIZE,
+	CTRL_ATTR_MAXATTR,
+	CTRL_ATTR_OPS,
+	CTRL_ATTR_MCAST_GROUPS,
+	__CTRL_ATTR_MAX,
+};
+
+#define CTRL_ATTR_MAX (__CTRL_ATTR_MAX - 1)
+
+enum {
+	CTRL_ATTR_OP_UNSPEC,
+	CTRL_ATTR_OP_ID,
+	CTRL_ATTR_OP_FLAGS,
+	__CTRL_ATTR_OP_MAX,
+};
+
+#define CTRL_ATTR_OP_MAX (__CTRL_ATTR_OP_MAX - 1)
+
+enum {
+	CTRL_ATTR_MCAST_GRP_UNSPEC,
+	CTRL_ATTR_MCAST_GRP_NAME,
+	CTRL_ATTR_MCAST_GRP_ID,
+	__CTRL_ATTR_MCAST_GRP_MAX,
+};
+
+#define CTRL_ATTR_MCAST_GRP_MAX (__CTRL_ATTR_MCAST_GRP_MAX - 1)
+
+
+#endif /* _UAPI__LINUX_GENERIC_NETLINK_H */
diff --git a/include/uapi/linux/gfs2_ondisk.h b/include/uapi/linux/gfs2_ondisk.h
new file mode 100644
index 00000000000..b2de1f9a88d
--- /dev/null
+++ b/include/uapi/linux/gfs2_ondisk.h
@@ -0,0 +1,464 @@
+/*
+ * Copyright (C) Sistina Software, Inc.  1997-2003 All rights reserved.
+ * Copyright (C) 2004-2006 Red Hat, Inc.  All rights reserved.
+ *
+ * This copyrighted material is made available to anyone wishing to use,
+ * modify, copy, or redistribute it subject to the terms and conditions
+ * of the GNU General Public License v.2.
+ */
+
+#ifndef __GFS2_ONDISK_DOT_H__
+#define __GFS2_ONDISK_DOT_H__
+
+#include <linux/types.h>
+
+#define GFS2_MAGIC		0x01161970
+#define GFS2_BASIC_BLOCK	512
+#define GFS2_BASIC_BLOCK_SHIFT	9
+
+/* Lock numbers of the LM_TYPE_NONDISK type */
+
+#define GFS2_MOUNT_LOCK		0
+#define GFS2_LIVE_LOCK		1
+#define GFS2_TRANS_LOCK		2
+#define GFS2_RENAME_LOCK	3
+#define GFS2_CONTROL_LOCK	4
+#define GFS2_MOUNTED_LOCK	5
+
+/* Format numbers for various metadata types */
+
+#define GFS2_FORMAT_NONE	0
+#define GFS2_FORMAT_SB		100
+#define GFS2_FORMAT_RG		200
+#define GFS2_FORMAT_RB		300
+#define GFS2_FORMAT_DI		400
+#define GFS2_FORMAT_IN		500
+#define GFS2_FORMAT_LF		600
+#define GFS2_FORMAT_JD		700
+#define GFS2_FORMAT_LH		800
+#define GFS2_FORMAT_LD		900
+#define GFS2_FORMAT_LB		1000
+#define GFS2_FORMAT_EA		1600
+#define GFS2_FORMAT_ED		1700
+#define GFS2_FORMAT_QC		1400
+/* These are format numbers for entities contained in files */
+#define GFS2_FORMAT_RI		1100
+#define GFS2_FORMAT_DE		1200
+#define GFS2_FORMAT_QU		1500
+/* These are part of the superblock */
+#define GFS2_FORMAT_FS		1801
+#define GFS2_FORMAT_MULTI	1900
+
+/*
+ * An on-disk inode number
+ */
+
+struct gfs2_inum {
+	__be64 no_formal_ino;
+	__be64 no_addr;
+};
+
+/*
+ * Generic metadata head structure
+ * Every inplace buffer logged in the journal must start with this.
+ */
+
+#define GFS2_METATYPE_NONE	0
+#define GFS2_METATYPE_SB	1
+#define GFS2_METATYPE_RG	2
+#define GFS2_METATYPE_RB	3
+#define GFS2_METATYPE_DI	4
+#define GFS2_METATYPE_IN	5
+#define GFS2_METATYPE_LF	6
+#define GFS2_METATYPE_JD	7
+#define GFS2_METATYPE_LH	8
+#define GFS2_METATYPE_LD	9
+#define GFS2_METATYPE_LB	12
+#define GFS2_METATYPE_EA	10
+#define GFS2_METATYPE_ED	11
+#define GFS2_METATYPE_QC	14
+
+struct gfs2_meta_header {
+	__be32 mh_magic;
+	__be32 mh_type;
+	__be64 __pad0;		/* Was generation number in gfs1 */
+	__be32 mh_format;
+	/* This union is to keep userspace happy */
+	union {
+		__be32 mh_jid;		/* Was incarnation number in gfs1 */
+		__be32 __pad1;
+	};
+};
+
+/*
+ * super-block structure
+ *
+ * It's probably good if SIZEOF_SB <= GFS2_BASIC_BLOCK (512 bytes)
+ *
+ * Order is important, need to be able to read old superblocks to do on-disk
+ * version upgrades.
+ */
+
+/* Address of superblock in GFS2 basic blocks */
+#define GFS2_SB_ADDR		128
+
+/* The lock number for the superblock (must be zero) */
+#define GFS2_SB_LOCK		0
+
+/* Requirement:  GFS2_LOCKNAME_LEN % 8 == 0
+   Includes: the fencing zero at the end */
+#define GFS2_LOCKNAME_LEN	64
+
+struct gfs2_sb {
+	struct gfs2_meta_header sb_header;
+
+	__be32 sb_fs_format;
+	__be32 sb_multihost_format;
+	__u32  __pad0;	/* Was superblock flags in gfs1 */
+
+	__be32 sb_bsize;
+	__be32 sb_bsize_shift;
+	__u32 __pad1;	/* Was journal segment size in gfs1 */
+
+	struct gfs2_inum sb_master_dir; /* Was jindex dinode in gfs1 */
+	struct gfs2_inum __pad2; /* Was rindex dinode in gfs1 */
+	struct gfs2_inum sb_root_dir;
+
+	char sb_lockproto[GFS2_LOCKNAME_LEN];
+	char sb_locktable[GFS2_LOCKNAME_LEN];
+
+	struct gfs2_inum __pad3; /* Was quota inode in gfs1 */
+	struct gfs2_inum __pad4; /* Was licence inode in gfs1 */
+#define GFS2_HAS_UUID 1
+	__u8 sb_uuid[16]; /* The UUID, maybe 0 for backwards compat */
+};
+
+/*
+ * resource index structure
+ */
+
+struct gfs2_rindex {
+	__be64 ri_addr;	/* grp block disk address */
+	__be32 ri_length;	/* length of rgrp header in fs blocks */
+	__u32 __pad;
+
+	__be64 ri_data0;	/* first data location */
+	__be32 ri_data;	/* num of data blocks in rgrp */
+
+	__be32 ri_bitbytes;	/* number of bytes in data bitmaps */
+
+	__u8 ri_reserved[64];
+};
+
+/*
+ * resource group header structure
+ */
+
+/* Number of blocks per byte in rgrp */
+#define GFS2_NBBY		4
+#define GFS2_BIT_SIZE		2
+#define GFS2_BIT_MASK		0x00000003
+
+#define GFS2_BLKST_FREE		0
+#define GFS2_BLKST_USED		1
+#define GFS2_BLKST_UNLINKED	2
+#define GFS2_BLKST_DINODE	3
+
+#define GFS2_RGF_JOURNAL	0x00000001
+#define GFS2_RGF_METAONLY	0x00000002
+#define GFS2_RGF_DATAONLY	0x00000004
+#define GFS2_RGF_NOALLOC	0x00000008
+#define GFS2_RGF_TRIMMED	0x00000010
+
+struct gfs2_rgrp_lvb {
+	__be32 rl_magic;
+	__be32 rl_flags;
+	__be32 rl_free;
+	__be32 rl_dinodes;
+	__be64 rl_igeneration;
+	__be32 rl_unlinked;
+	__be32 __pad;
+};
+
+struct gfs2_rgrp {
+	struct gfs2_meta_header rg_header;
+
+	__be32 rg_flags;
+	__be32 rg_free;
+	__be32 rg_dinodes;
+	__be32 __pad;
+	__be64 rg_igeneration;
+
+	__u8 rg_reserved[80]; /* Several fields from gfs1 now reserved */
+};
+
+/*
+ * quota structure
+ */
+
+struct gfs2_quota {
+	__be64 qu_limit;
+	__be64 qu_warn;
+	__be64 qu_value;
+	__u8 qu_reserved[64];
+};
+
+/*
+ * dinode structure
+ */
+
+#define GFS2_MAX_META_HEIGHT	10
+#define GFS2_DIR_MAX_DEPTH	17
+
+#define DT2IF(dt) (((dt) << 12) & S_IFMT)
+#define IF2DT(sif) (((sif) & S_IFMT) >> 12)
+
+enum {
+	gfs2fl_Jdata		= 0,
+	gfs2fl_ExHash		= 1,
+	gfs2fl_Unused		= 2,
+	gfs2fl_EaIndirect	= 3,
+	gfs2fl_Directio		= 4,
+	gfs2fl_Immutable	= 5,
+	gfs2fl_AppendOnly	= 6,
+	gfs2fl_NoAtime		= 7,
+	gfs2fl_Sync		= 8,
+	gfs2fl_System		= 9,
+	gfs2fl_TopLevel		= 10,
+	gfs2fl_TruncInProg	= 29,
+	gfs2fl_InheritDirectio	= 30,
+	gfs2fl_InheritJdata	= 31,
+};
+
+/* Dinode flags */
+#define GFS2_DIF_JDATA			0x00000001
+#define GFS2_DIF_EXHASH			0x00000002
+#define GFS2_DIF_UNUSED			0x00000004  /* only in gfs1 */
+#define GFS2_DIF_EA_INDIRECT		0x00000008
+#define GFS2_DIF_DIRECTIO		0x00000010
+#define GFS2_DIF_IMMUTABLE		0x00000020
+#define GFS2_DIF_APPENDONLY		0x00000040
+#define GFS2_DIF_NOATIME		0x00000080
+#define GFS2_DIF_SYNC			0x00000100
+#define GFS2_DIF_SYSTEM			0x00000200 /* New in gfs2 */
+#define GFS2_DIF_TOPDIR			0x00000400 /* New in gfs2 */
+#define GFS2_DIF_TRUNC_IN_PROG		0x20000000 /* New in gfs2 */
+#define GFS2_DIF_INHERIT_DIRECTIO	0x40000000 /* only in gfs1 */
+#define GFS2_DIF_INHERIT_JDATA		0x80000000
+
+struct gfs2_dinode {
+	struct gfs2_meta_header di_header;
+
+	struct gfs2_inum di_num;
+
+	__be32 di_mode;	/* mode of file */
+	__be32 di_uid;	/* owner's user id */
+	__be32 di_gid;	/* owner's group id */
+	__be32 di_nlink;	/* number of links to this file */
+	__be64 di_size;	/* number of bytes in file */
+	__be64 di_blocks;	/* number of blocks in file */
+	__be64 di_atime;	/* time last accessed */
+	__be64 di_mtime;	/* time last modified */
+	__be64 di_ctime;	/* time last changed */
+	__be32 di_major;	/* device major number */
+	__be32 di_minor;	/* device minor number */
+
+	/* This section varies from gfs1. Padding added to align with
+         * remainder of dinode
+	 */
+	__be64 di_goal_meta;	/* rgrp to alloc from next */
+	__be64 di_goal_data;	/* data block goal */
+	__be64 di_generation;	/* generation number for NFS */
+
+	__be32 di_flags;	/* GFS2_DIF_... */
+	__be32 di_payload_format;  /* GFS2_FORMAT_... */
+	__u16 __pad1;	/* Was ditype in gfs1 */
+	__be16 di_height;	/* height of metadata */
+	__u32 __pad2;	/* Unused incarnation number from gfs1 */
+
+	/* These only apply to directories  */
+	__u16 __pad3;	/* Padding */
+	__be16 di_depth;	/* Number of bits in the table */
+	__be32 di_entries;	/* The number of entries in the directory */
+
+	struct gfs2_inum __pad4; /* Unused even in current gfs1 */
+
+	__be64 di_eattr;	/* extended attribute block number */
+	__be32 di_atime_nsec;   /* nsec portion of atime */
+	__be32 di_mtime_nsec;   /* nsec portion of mtime */
+	__be32 di_ctime_nsec;   /* nsec portion of ctime */
+
+	__u8 di_reserved[44];
+};
+
+/*
+ * directory structure - many of these per directory file
+ */
+
+#define GFS2_FNAMESIZE		255
+#define GFS2_DIRENT_SIZE(name_len) ((sizeof(struct gfs2_dirent) + (name_len) + 7) & ~7)
+
+struct gfs2_dirent {
+	struct gfs2_inum de_inum;
+	__be32 de_hash;
+	__be16 de_rec_len;
+	__be16 de_name_len;
+	__be16 de_type;
+	__u8 __pad[14];
+};
+
+/*
+ * Header of leaf directory nodes
+ */
+
+struct gfs2_leaf {
+	struct gfs2_meta_header lf_header;
+
+	__be16 lf_depth;		/* Depth of leaf */
+	__be16 lf_entries;		/* Number of dirents in leaf */
+	__be32 lf_dirent_format;	/* Format of the dirents */
+	__be64 lf_next;			/* Next leaf, if overflow */
+
+	__u8 lf_reserved[64];
+};
+
+/*
+ * Extended attribute header format
+ *
+ * This works in a similar way to dirents. There is a fixed size header
+ * followed by a variable length section made up of the name and the
+ * associated data. In the case of a "stuffed" entry, the value is
+ * inline directly after the name, the ea_num_ptrs entry will be
+ * zero in that case. For non-"stuffed" entries, there will be
+ * a set of pointers (aligned to 8 byte boundary) to the block(s)
+ * containing the value.
+ *
+ * The blocks containing the values and the blocks containing the
+ * extended attribute headers themselves all start with the common
+ * metadata header. Each inode, if it has extended attributes, will
+ * have either a single block containing the extended attribute headers
+ * or a single indirect block pointing to blocks containing the
+ * extended attribure headers.
+ *
+ * The maximim size of the data part of an extended attribute is 64k
+ * so the number of blocks required depends upon block size. Since the
+ * block size also determines the number of pointers in an indirect
+ * block, its a fairly complicated calculation to work out the maximum
+ * number of blocks that an inode may have relating to extended attributes.
+ *
+ */
+
+#define GFS2_EA_MAX_NAME_LEN	255
+#define GFS2_EA_MAX_DATA_LEN	65536
+
+#define GFS2_EATYPE_UNUSED	0
+#define GFS2_EATYPE_USR		1
+#define GFS2_EATYPE_SYS		2
+#define GFS2_EATYPE_SECURITY	3
+
+#define GFS2_EATYPE_LAST	3
+#define GFS2_EATYPE_VALID(x)	((x) <= GFS2_EATYPE_LAST)
+
+#define GFS2_EAFLAG_LAST	0x01	/* last ea in block */
+
+struct gfs2_ea_header {
+	__be32 ea_rec_len;
+	__be32 ea_data_len;
+	__u8 ea_name_len;	/* no NULL pointer after the string */
+	__u8 ea_type;		/* GFS2_EATYPE_... */
+	__u8 ea_flags;		/* GFS2_EAFLAG_... */
+	__u8 ea_num_ptrs;
+	__u32 __pad;
+};
+
+/*
+ * Log header structure
+ */
+
+#define GFS2_LOG_HEAD_UNMOUNT	0x00000001	/* log is clean */
+
+struct gfs2_log_header {
+	struct gfs2_meta_header lh_header;
+
+	__be64 lh_sequence;	/* Sequence number of this transaction */
+	__be32 lh_flags;	/* GFS2_LOG_HEAD_... */
+	__be32 lh_tail;		/* Block number of log tail */
+	__be32 lh_blkno;
+	__be32 lh_hash;
+};
+
+/*
+ * Log type descriptor
+ */
+
+#define GFS2_LOG_DESC_METADATA	300
+/* ld_data1 is the number of metadata blocks in the descriptor.
+   ld_data2 is unused. */
+
+#define GFS2_LOG_DESC_REVOKE	301
+/* ld_data1 is the number of revoke blocks in the descriptor.
+   ld_data2 is unused. */
+
+#define GFS2_LOG_DESC_JDATA	302
+/* ld_data1 is the number of data blocks in the descriptor.
+   ld_data2 is unused. */
+
+struct gfs2_log_descriptor {
+	struct gfs2_meta_header ld_header;
+
+	__be32 ld_type;		/* GFS2_LOG_DESC_... */
+	__be32 ld_length;	/* Number of buffers in this chunk */
+	__be32 ld_data1;	/* descriptor-specific field */
+	__be32 ld_data2;	/* descriptor-specific field */
+
+	__u8 ld_reserved[32];
+};
+
+/*
+ * Inum Range
+ * Describe a range of formal inode numbers allocated to
+ * one machine to assign to inodes.
+ */
+
+#define GFS2_INUM_QUANTUM	1048576
+
+struct gfs2_inum_range {
+	__be64 ir_start;
+	__be64 ir_length;
+};
+
+/*
+ * Statfs change
+ * Describes an change to the pool of free and allocated
+ * blocks.
+ */
+
+struct gfs2_statfs_change {
+	__be64 sc_total;
+	__be64 sc_free;
+	__be64 sc_dinodes;
+};
+
+/*
+ * Quota change
+ * Describes an allocation change for a particular
+ * user or group.
+ */
+
+#define GFS2_QCF_USER		0x00000001
+
+struct gfs2_quota_change {
+	__be64 qc_change;
+	__be32 qc_flags;	/* GFS2_QCF_... */
+	__be32 qc_id;
+};
+
+struct gfs2_quota_lvb {
+        __be32 qb_magic;
+        __u32 __pad;
+        __be64 qb_limit;      /* Hard limit of # blocks to alloc */
+        __be64 qb_warn;       /* Warn user when alloc is above this # */
+        __be64 qb_value;       /* Current # blocks allocated */
+};
+
+#endif /* __GFS2_ONDISK_DOT_H__ */
diff --git a/include/uapi/linux/gigaset_dev.h b/include/uapi/linux/gigaset_dev.h
new file mode 100644
index 00000000000..258ba82937e
--- /dev/null
+++ b/include/uapi/linux/gigaset_dev.h
@@ -0,0 +1,38 @@
+/*
+ * interface to user space for the gigaset driver
+ *
+ * Copyright (c) 2004 by Hansjoerg Lipp <hjlipp@web.de>
+ *
+ * =====================================================================
+ *    This program is free software; you can redistribute it and/or
+ *    modify it under the terms of the GNU General Public License as
+ *    published by the Free Software Foundation; either version 2 of
+ *    the License, or (at your option) any later version.
+ * =====================================================================
+ */
+
+#ifndef GIGASET_INTERFACE_H
+#define GIGASET_INTERFACE_H
+
+#include <linux/ioctl.h>
+
+/* The magic IOCTL value for this interface. */
+#define GIGASET_IOCTL 0x47
+
+/* enable/disable device control via character device (lock out ISDN subsys) */
+#define GIGASET_REDIR    _IOWR(GIGASET_IOCTL, 0, int)
+
+/* enable adapter configuration mode (M10x only) */
+#define GIGASET_CONFIG   _IOWR(GIGASET_IOCTL, 1, int)
+
+/* set break characters (M105 only) */
+#define GIGASET_BRKCHARS _IOW(GIGASET_IOCTL, 2, unsigned char[6])
+
+/* get version information selected by arg[0] */
+#define GIGASET_VERSION  _IOWR(GIGASET_IOCTL, 3, unsigned[4])
+/* values for GIGASET_VERSION arg[0] */
+#define GIGVER_DRIVER 0		/* get driver version */
+#define GIGVER_COMPAT 1		/* get interface compatibility version */
+#define GIGVER_FWBASE 2		/* get base station firmware version */
+
+#endif
diff --git a/include/uapi/linux/hdlc.h b/include/uapi/linux/hdlc.h
new file mode 100644
index 00000000000..2c5f0aff4cf
--- /dev/null
+++ b/include/uapi/linux/hdlc.h
@@ -0,0 +1,23 @@
+/*
+ * Generic HDLC support routines for Linux
+ *
+ * Copyright (C) 1999-2005 Krzysztof Halasa <khc@pm.waw.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ */
+
+#ifndef _UAPI__HDLC_H
+#define _UAPI__HDLC_H
+
+
+#define HDLC_MAX_MTU 1500	/* Ethernet 1500 bytes */
+#if 0
+#define HDLC_MAX_MRU (HDLC_MAX_MTU + 10 + 14 + 4) /* for ETH+VLAN over FR */
+#else
+#define HDLC_MAX_MRU 1600 /* as required for FR network */
+#endif
+
+
+#endif /* _UAPI__HDLC_H */
diff --git a/include/uapi/linux/hdlcdrv.h b/include/uapi/linux/hdlcdrv.h
new file mode 100644
index 00000000000..ffc79c0b44a
--- /dev/null
+++ b/include/uapi/linux/hdlcdrv.h
@@ -0,0 +1,110 @@
+/*
+ * hdlcdrv.h  -- HDLC packet radio network driver.
+ * The Linux soundcard driver for 1200 baud and 9600 baud packet radio
+ * (C) 1996-1998 by Thomas Sailer, HB9JNX/AE4WA
+ */
+
+#ifndef _UAPI_HDLCDRV_H
+#define _UAPI_HDLCDRV_H
+
+/* -------------------------------------------------------------------- */
+/*
+ * structs for the IOCTL commands
+ */
+
+struct hdlcdrv_params {
+	int iobase;
+	int irq;
+	int dma;
+	int dma2;
+	int seriobase;
+	int pariobase;
+	int midiiobase;
+};	
+
+struct hdlcdrv_channel_params {
+	int tx_delay;  /* the transmitter keyup delay in 10ms units */
+	int tx_tail;   /* the transmitter keyoff delay in 10ms units */
+	int slottime;  /* the slottime in 10ms; usually 10 = 100ms */
+	int ppersist;  /* the p-persistence 0..255 */
+	int fulldup;   /* some driver do not support full duplex, setting */
+	               /* this just makes them send even if DCD is on */
+};	
+
+struct hdlcdrv_old_channel_state {
+  	int ptt;
+  	int dcd;
+  	int ptt_keyed;
+};
+
+struct hdlcdrv_channel_state {
+ 	int ptt;
+ 	int dcd;
+ 	int ptt_keyed;
+ 	unsigned long tx_packets;
+ 	unsigned long tx_errors;
+ 	unsigned long rx_packets;
+ 	unsigned long rx_errors;
+};
+
+struct hdlcdrv_ioctl {
+	int cmd;
+	union {
+		struct hdlcdrv_params mp;
+		struct hdlcdrv_channel_params cp;
+		struct hdlcdrv_channel_state cs;
+		struct hdlcdrv_old_channel_state ocs;
+		unsigned int calibrate;
+		unsigned char bits;
+		char modename[128];
+		char drivername[32];
+	} data;
+};
+
+/* -------------------------------------------------------------------- */
+
+/*
+ * ioctl values
+ */
+#define HDLCDRVCTL_GETMODEMPAR       0
+#define HDLCDRVCTL_SETMODEMPAR       1
+#define HDLCDRVCTL_MODEMPARMASK      2  /* not handled by hdlcdrv */
+#define HDLCDRVCTL_GETCHANNELPAR    10
+#define HDLCDRVCTL_SETCHANNELPAR    11
+#define HDLCDRVCTL_OLDGETSTAT       20
+#define HDLCDRVCTL_CALIBRATE        21
+#define HDLCDRVCTL_GETSTAT          22
+
+/*
+ * these are mainly for debugging purposes
+ */
+#define HDLCDRVCTL_GETSAMPLES       30
+#define HDLCDRVCTL_GETBITS          31
+
+/*
+ * not handled by hdlcdrv, but by its depending drivers
+ */
+#define HDLCDRVCTL_GETMODE          40
+#define HDLCDRVCTL_SETMODE          41
+#define HDLCDRVCTL_MODELIST         42
+#define HDLCDRVCTL_DRIVERNAME       43
+
+/*
+ * mask of needed modem parameters, returned by HDLCDRVCTL_MODEMPARMASK
+ */
+#define HDLCDRV_PARMASK_IOBASE      (1<<0)
+#define HDLCDRV_PARMASK_IRQ         (1<<1)
+#define HDLCDRV_PARMASK_DMA         (1<<2)
+#define HDLCDRV_PARMASK_DMA2        (1<<3)
+#define HDLCDRV_PARMASK_SERIOBASE   (1<<4)
+#define HDLCDRV_PARMASK_PARIOBASE   (1<<5)
+#define HDLCDRV_PARMASK_MIDIIOBASE  (1<<6)
+
+/* -------------------------------------------------------------------- */
+
+
+/* -------------------------------------------------------------------- */
+
+#endif /* _UAPI_HDLCDRV_H */
+
+/* -------------------------------------------------------------------- */
diff --git a/include/uapi/linux/hdreg.h b/include/uapi/linux/hdreg.h
new file mode 100644
index 00000000000..29ee2873f4a
--- /dev/null
+++ b/include/uapi/linux/hdreg.h
@@ -0,0 +1,658 @@
+#ifndef _LINUX_HDREG_H
+#define _LINUX_HDREG_H
+
+#include <linux/types.h>
+
+/*
+ * Command Header sizes for IOCTL commands
+ */
+
+#define HDIO_DRIVE_CMD_HDR_SIZE		(4 * sizeof(__u8))
+#define HDIO_DRIVE_HOB_HDR_SIZE		(8 * sizeof(__u8))
+#define HDIO_DRIVE_TASK_HDR_SIZE	(8 * sizeof(__u8))
+
+#define IDE_DRIVE_TASK_NO_DATA		0
+#ifndef __KERNEL__
+#define IDE_DRIVE_TASK_INVALID		-1
+#define IDE_DRIVE_TASK_SET_XFER		1
+#define IDE_DRIVE_TASK_IN		2
+#define IDE_DRIVE_TASK_OUT		3
+#endif
+#define IDE_DRIVE_TASK_RAW_WRITE	4
+
+/*
+ * Define standard taskfile in/out register
+ */
+#define IDE_TASKFILE_STD_IN_FLAGS	0xFE
+#define IDE_HOB_STD_IN_FLAGS		0x3C
+#ifndef __KERNEL__
+#define IDE_TASKFILE_STD_OUT_FLAGS	0xFE
+#define IDE_HOB_STD_OUT_FLAGS		0x3C
+
+typedef unsigned char task_ioreg_t;
+typedef unsigned long sata_ioreg_t;
+#endif
+
+typedef union ide_reg_valid_s {
+	unsigned all				: 16;
+	struct {
+		unsigned data			: 1;
+		unsigned error_feature		: 1;
+		unsigned sector			: 1;
+		unsigned nsector		: 1;
+		unsigned lcyl			: 1;
+		unsigned hcyl			: 1;
+		unsigned select			: 1;
+		unsigned status_command		: 1;
+
+		unsigned data_hob		: 1;
+		unsigned error_feature_hob	: 1;
+		unsigned sector_hob		: 1;
+		unsigned nsector_hob		: 1;
+		unsigned lcyl_hob		: 1;
+		unsigned hcyl_hob		: 1;
+		unsigned select_hob		: 1;
+		unsigned control_hob		: 1;
+	} b;
+} ide_reg_valid_t;
+
+typedef struct ide_task_request_s {
+	__u8		io_ports[8];
+	__u8		hob_ports[8]; /* bytes 6 and 7 are unused */
+	ide_reg_valid_t	out_flags;
+	ide_reg_valid_t	in_flags;
+	int		data_phase;
+	int		req_cmd;
+	unsigned long	out_size;
+	unsigned long	in_size;
+} ide_task_request_t;
+
+typedef struct ide_ioctl_request_s {
+	ide_task_request_t	*task_request;
+	unsigned char		*out_buffer;
+	unsigned char		*in_buffer;
+} ide_ioctl_request_t;
+
+struct hd_drive_cmd_hdr {
+	__u8 command;
+	__u8 sector_number;
+	__u8 feature;
+	__u8 sector_count;
+};
+
+#ifndef __KERNEL__
+typedef struct hd_drive_task_hdr {
+	__u8 data;
+	__u8 feature;
+	__u8 sector_count;
+	__u8 sector_number;
+	__u8 low_cylinder;
+	__u8 high_cylinder;
+	__u8 device_head;
+	__u8 command;
+} task_struct_t;
+
+typedef struct hd_drive_hob_hdr {
+	__u8 data;
+	__u8 feature;
+	__u8 sector_count;
+	__u8 sector_number;
+	__u8 low_cylinder;
+	__u8 high_cylinder;
+	__u8 device_head;
+	__u8 control;
+} hob_struct_t;
+#endif
+
+#define TASKFILE_NO_DATA		0x0000
+
+#define TASKFILE_IN			0x0001
+#define TASKFILE_MULTI_IN		0x0002
+
+#define TASKFILE_OUT			0x0004
+#define TASKFILE_MULTI_OUT		0x0008
+#define TASKFILE_IN_OUT			0x0010
+
+#define TASKFILE_IN_DMA			0x0020
+#define TASKFILE_OUT_DMA		0x0040
+#define TASKFILE_IN_DMAQ		0x0080
+#define TASKFILE_OUT_DMAQ		0x0100
+
+#ifndef __KERNEL__
+#define TASKFILE_P_IN			0x0200
+#define TASKFILE_P_OUT			0x0400
+#define TASKFILE_P_IN_DMA		0x0800
+#define TASKFILE_P_OUT_DMA		0x1000
+#define TASKFILE_P_IN_DMAQ		0x2000
+#define TASKFILE_P_OUT_DMAQ		0x4000
+#define TASKFILE_48			0x8000
+#define TASKFILE_INVALID		0x7fff
+#endif
+
+#ifndef __KERNEL__
+/* ATA/ATAPI Commands pre T13 Spec */
+#define WIN_NOP				0x00
+/*
+ *	0x01->0x02 Reserved
+ */
+#define CFA_REQ_EXT_ERROR_CODE		0x03 /* CFA Request Extended Error Code */
+/*
+ *	0x04->0x07 Reserved
+ */
+#define WIN_SRST			0x08 /* ATAPI soft reset command */
+#define WIN_DEVICE_RESET		0x08
+/*
+ *	0x09->0x0F Reserved
+ */
+#define WIN_RECAL			0x10
+#define WIN_RESTORE			WIN_RECAL
+/*
+ *	0x10->0x1F Reserved
+ */
+#define WIN_READ			0x20 /* 28-Bit */
+#define WIN_READ_ONCE			0x21 /* 28-Bit without retries */
+#define WIN_READ_LONG			0x22 /* 28-Bit */
+#define WIN_READ_LONG_ONCE		0x23 /* 28-Bit without retries */
+#define WIN_READ_EXT			0x24 /* 48-Bit */
+#define WIN_READDMA_EXT			0x25 /* 48-Bit */
+#define WIN_READDMA_QUEUED_EXT		0x26 /* 48-Bit */
+#define WIN_READ_NATIVE_MAX_EXT		0x27 /* 48-Bit */
+/*
+ *	0x28
+ */
+#define WIN_MULTREAD_EXT		0x29 /* 48-Bit */
+/*
+ *	0x2A->0x2F Reserved
+ */
+#define WIN_WRITE			0x30 /* 28-Bit */
+#define WIN_WRITE_ONCE			0x31 /* 28-Bit without retries */
+#define WIN_WRITE_LONG			0x32 /* 28-Bit */
+#define WIN_WRITE_LONG_ONCE		0x33 /* 28-Bit without retries */
+#define WIN_WRITE_EXT			0x34 /* 48-Bit */
+#define WIN_WRITEDMA_EXT		0x35 /* 48-Bit */
+#define WIN_WRITEDMA_QUEUED_EXT		0x36 /* 48-Bit */
+#define WIN_SET_MAX_EXT			0x37 /* 48-Bit */
+#define CFA_WRITE_SECT_WO_ERASE		0x38 /* CFA Write Sectors without erase */
+#define WIN_MULTWRITE_EXT		0x39 /* 48-Bit */
+/*
+ *	0x3A->0x3B Reserved
+ */
+#define WIN_WRITE_VERIFY		0x3C /* 28-Bit */
+/*
+ *	0x3D->0x3F Reserved
+ */
+#define WIN_VERIFY			0x40 /* 28-Bit - Read Verify Sectors */
+#define WIN_VERIFY_ONCE			0x41 /* 28-Bit - without retries */
+#define WIN_VERIFY_EXT			0x42 /* 48-Bit */
+/*
+ *	0x43->0x4F Reserved
+ */
+#define WIN_FORMAT			0x50
+/*
+ *	0x51->0x5F Reserved
+ */
+#define WIN_INIT			0x60
+/*
+ *	0x61->0x5F Reserved
+ */
+#define WIN_SEEK			0x70 /* 0x70-0x7F Reserved */
+
+#define CFA_TRANSLATE_SECTOR		0x87 /* CFA Translate Sector */
+#define WIN_DIAGNOSE			0x90
+#define WIN_SPECIFY			0x91 /* set drive geometry translation */
+#define WIN_DOWNLOAD_MICROCODE		0x92
+#define WIN_STANDBYNOW2			0x94
+#define WIN_STANDBY2			0x96
+#define WIN_SETIDLE2			0x97
+#define WIN_CHECKPOWERMODE2		0x98
+#define WIN_SLEEPNOW2			0x99
+/*
+ *	0x9A VENDOR
+ */
+#define WIN_PACKETCMD			0xA0 /* Send a packet command. */
+#define WIN_PIDENTIFY			0xA1 /* identify ATAPI device	*/
+#define WIN_QUEUED_SERVICE		0xA2
+#define WIN_SMART			0xB0 /* self-monitoring and reporting */
+#define CFA_ERASE_SECTORS		0xC0
+#define WIN_MULTREAD			0xC4 /* read sectors using multiple mode*/
+#define WIN_MULTWRITE			0xC5 /* write sectors using multiple mode */
+#define WIN_SETMULT			0xC6 /* enable/disable multiple mode */
+#define WIN_READDMA_QUEUED		0xC7 /* read sectors using Queued DMA transfers */
+#define WIN_READDMA			0xC8 /* read sectors using DMA transfers */
+#define WIN_READDMA_ONCE		0xC9 /* 28-Bit - without retries */
+#define WIN_WRITEDMA			0xCA /* write sectors using DMA transfers */
+#define WIN_WRITEDMA_ONCE		0xCB /* 28-Bit - without retries */
+#define WIN_WRITEDMA_QUEUED		0xCC /* write sectors using Queued DMA transfers */
+#define CFA_WRITE_MULTI_WO_ERASE	0xCD /* CFA Write multiple without erase */
+#define WIN_GETMEDIASTATUS		0xDA
+#define WIN_ACKMEDIACHANGE		0xDB /* ATA-1, ATA-2 vendor */
+#define WIN_POSTBOOT			0xDC
+#define WIN_PREBOOT 			0xDD
+#define WIN_DOORLOCK			0xDE /* lock door on removable drives */
+#define WIN_DOORUNLOCK			0xDF /* unlock door on removable drives */
+#define WIN_STANDBYNOW1			0xE0
+#define WIN_IDLEIMMEDIATE		0xE1 /* force drive to become "ready" */
+#define WIN_STANDBY			0xE2 /* Set device in Standby Mode */
+#define WIN_SETIDLE1			0xE3
+#define WIN_READ_BUFFER			0xE4 /* force read only 1 sector */
+#define WIN_CHECKPOWERMODE1		0xE5
+#define WIN_SLEEPNOW1			0xE6
+#define WIN_FLUSH_CACHE			0xE7
+#define WIN_WRITE_BUFFER		0xE8 /* force write only 1 sector */
+#define WIN_WRITE_SAME			0xE9 /* read ata-2 to use */
+	/* SET_FEATURES 0x22 or 0xDD */
+#define WIN_FLUSH_CACHE_EXT		0xEA /* 48-Bit */
+#define WIN_IDENTIFY			0xEC /* ask drive to identify itself	*/
+#define WIN_MEDIAEJECT			0xED
+#define WIN_IDENTIFY_DMA		0xEE /* same as WIN_IDENTIFY, but DMA */
+#define WIN_SETFEATURES			0xEF /* set special drive features */
+#define EXABYTE_ENABLE_NEST		0xF0
+#define WIN_SECURITY_SET_PASS		0xF1
+#define WIN_SECURITY_UNLOCK		0xF2
+#define WIN_SECURITY_ERASE_PREPARE	0xF3
+#define WIN_SECURITY_ERASE_UNIT		0xF4
+#define WIN_SECURITY_FREEZE_LOCK	0xF5
+#define WIN_SECURITY_DISABLE		0xF6
+#define WIN_READ_NATIVE_MAX		0xF8 /* return the native maximum address */
+#define WIN_SET_MAX			0xF9
+#define DISABLE_SEAGATE			0xFB
+
+/* WIN_SMART sub-commands */
+
+#define SMART_READ_VALUES		0xD0
+#define SMART_READ_THRESHOLDS		0xD1
+#define SMART_AUTOSAVE			0xD2
+#define SMART_SAVE			0xD3
+#define SMART_IMMEDIATE_OFFLINE		0xD4
+#define SMART_READ_LOG_SECTOR		0xD5
+#define SMART_WRITE_LOG_SECTOR		0xD6
+#define SMART_WRITE_THRESHOLDS		0xD7
+#define SMART_ENABLE			0xD8
+#define SMART_DISABLE			0xD9
+#define SMART_STATUS			0xDA
+#define SMART_AUTO_OFFLINE		0xDB
+
+/* Password used in TF4 & TF5 executing SMART commands */
+
+#define SMART_LCYL_PASS			0x4F
+#define SMART_HCYL_PASS			0xC2
+
+/* WIN_SETFEATURES sub-commands */
+#define SETFEATURES_EN_8BIT	0x01	/* Enable 8-Bit Transfers */
+#define SETFEATURES_EN_WCACHE	0x02	/* Enable write cache */
+#define SETFEATURES_DIS_DEFECT	0x04	/* Disable Defect Management */
+#define SETFEATURES_EN_APM	0x05	/* Enable advanced power management */
+#define SETFEATURES_EN_SAME_R	0x22	/* for a region ATA-1 */
+#define SETFEATURES_DIS_MSN	0x31	/* Disable Media Status Notification */
+#define SETFEATURES_DIS_RETRY	0x33	/* Disable Retry */
+#define SETFEATURES_EN_AAM	0x42	/* Enable Automatic Acoustic Management */
+#define SETFEATURES_RW_LONG	0x44	/* Set Length of VS bytes */
+#define SETFEATURES_SET_CACHE	0x54	/* Set Cache segments to SC Reg. Val */
+#define SETFEATURES_DIS_RLA	0x55	/* Disable read look-ahead feature */
+#define SETFEATURES_EN_RI	0x5D	/* Enable release interrupt */
+#define SETFEATURES_EN_SI	0x5E	/* Enable SERVICE interrupt */
+#define SETFEATURES_DIS_RPOD	0x66	/* Disable reverting to power on defaults */
+#define SETFEATURES_DIS_ECC	0x77	/* Disable ECC byte count */
+#define SETFEATURES_DIS_8BIT	0x81	/* Disable 8-Bit Transfers */
+#define SETFEATURES_DIS_WCACHE	0x82	/* Disable write cache */
+#define SETFEATURES_EN_DEFECT	0x84	/* Enable Defect Management */
+#define SETFEATURES_DIS_APM	0x85	/* Disable advanced power management */
+#define SETFEATURES_EN_ECC	0x88	/* Enable ECC byte count */
+#define SETFEATURES_EN_MSN	0x95	/* Enable Media Status Notification */
+#define SETFEATURES_EN_RETRY	0x99	/* Enable Retry */
+#define SETFEATURES_EN_RLA	0xAA	/* Enable read look-ahead feature */
+#define SETFEATURES_PREFETCH	0xAB	/* Sets drive prefetch value */
+#define SETFEATURES_EN_REST	0xAC	/* ATA-1 */
+#define SETFEATURES_4B_RW_LONG	0xBB	/* Set Length of 4 bytes */
+#define SETFEATURES_DIS_AAM	0xC2	/* Disable Automatic Acoustic Management */
+#define SETFEATURES_EN_RPOD	0xCC	/* Enable reverting to power on defaults */
+#define SETFEATURES_DIS_RI	0xDD	/* Disable release interrupt ATAPI */
+#define SETFEATURES_EN_SAME_M	0xDD	/* for a entire device ATA-1 */
+#define SETFEATURES_DIS_SI	0xDE	/* Disable SERVICE interrupt ATAPI */
+
+/* WIN_SECURITY sub-commands */
+
+#define SECURITY_SET_PASSWORD		0xBA
+#define SECURITY_UNLOCK			0xBB
+#define SECURITY_ERASE_PREPARE		0xBC
+#define SECURITY_ERASE_UNIT		0xBD
+#define SECURITY_FREEZE_LOCK		0xBE
+#define SECURITY_DISABLE_PASSWORD	0xBF
+#endif /* __KERNEL__ */
+
+struct hd_geometry {
+      unsigned char heads;
+      unsigned char sectors;
+      unsigned short cylinders;
+      unsigned long start;
+};
+
+/* hd/ide ctl's that pass (arg) ptrs to user space are numbered 0x030n/0x031n */
+#define HDIO_GETGEO		0x0301	/* get device geometry */
+#define HDIO_GET_UNMASKINTR	0x0302	/* get current unmask setting */
+#define HDIO_GET_MULTCOUNT	0x0304	/* get current IDE blockmode setting */
+#define HDIO_GET_QDMA		0x0305	/* get use-qdma flag */
+
+#define HDIO_SET_XFER		0x0306  /* set transfer rate via proc */
+
+#define HDIO_OBSOLETE_IDENTITY	0x0307	/* OBSOLETE, DO NOT USE: returns 142 bytes */
+#define HDIO_GET_KEEPSETTINGS	0x0308	/* get keep-settings-on-reset flag */
+#define HDIO_GET_32BIT		0x0309	/* get current io_32bit setting */
+#define HDIO_GET_NOWERR		0x030a	/* get ignore-write-error flag */
+#define HDIO_GET_DMA		0x030b	/* get use-dma flag */
+#define HDIO_GET_NICE		0x030c	/* get nice flags */
+#define HDIO_GET_IDENTITY	0x030d	/* get IDE identification info */
+#define HDIO_GET_WCACHE		0x030e	/* get write cache mode on|off */
+#define HDIO_GET_ACOUSTIC	0x030f	/* get acoustic value */
+#define	HDIO_GET_ADDRESS	0x0310	/* */
+
+#define HDIO_GET_BUSSTATE	0x031a	/* get the bus state of the hwif */
+#define HDIO_TRISTATE_HWIF	0x031b	/* execute a channel tristate */
+#define HDIO_DRIVE_RESET	0x031c	/* execute a device reset */
+#define HDIO_DRIVE_TASKFILE	0x031d	/* execute raw taskfile */
+#define HDIO_DRIVE_TASK		0x031e	/* execute task and special drive command */
+#define HDIO_DRIVE_CMD		0x031f	/* execute a special drive command */
+#define HDIO_DRIVE_CMD_AEB	HDIO_DRIVE_TASK
+
+/* hd/ide ctl's that pass (arg) non-ptr values are numbered 0x032n/0x033n */
+#define HDIO_SET_MULTCOUNT	0x0321	/* change IDE blockmode */
+#define HDIO_SET_UNMASKINTR	0x0322	/* permit other irqs during I/O */
+#define HDIO_SET_KEEPSETTINGS	0x0323	/* keep ioctl settings on reset */
+#define HDIO_SET_32BIT		0x0324	/* change io_32bit flags */
+#define HDIO_SET_NOWERR		0x0325	/* change ignore-write-error flag */
+#define HDIO_SET_DMA		0x0326	/* change use-dma flag */
+#define HDIO_SET_PIO_MODE	0x0327	/* reconfig interface to new speed */
+#ifndef __KERNEL__
+#define HDIO_SCAN_HWIF		0x0328	/* register and (re)scan interface */
+#define HDIO_UNREGISTER_HWIF	0x032a  /* unregister interface */
+#endif
+#define HDIO_SET_NICE		0x0329	/* set nice flags */
+#define HDIO_SET_WCACHE		0x032b	/* change write cache enable-disable */
+#define HDIO_SET_ACOUSTIC	0x032c	/* change acoustic behavior */
+#define HDIO_SET_BUSSTATE	0x032d	/* set the bus state of the hwif */
+#define HDIO_SET_QDMA		0x032e	/* change use-qdma flag */
+#define HDIO_SET_ADDRESS	0x032f	/* change lba addressing modes */
+
+/* bus states */
+enum {
+	BUSSTATE_OFF = 0,
+	BUSSTATE_ON,
+	BUSSTATE_TRISTATE
+};
+
+/* hd/ide ctl's that pass (arg) ptrs to user space are numbered 0x033n/0x033n */
+/* 0x330 is reserved - used to be HDIO_GETGEO_BIG */
+/* 0x331 is reserved - used to be HDIO_GETGEO_BIG_RAW */
+/* 0x338 is reserved - used to be HDIO_SET_IDE_SCSI */
+/* 0x339 is reserved - used to be HDIO_SET_SCSI_IDE */
+
+#define __NEW_HD_DRIVE_ID
+
+#ifndef __KERNEL__
+/*
+ * Structure returned by HDIO_GET_IDENTITY, as per ANSI NCITS ATA6 rev.1b spec.
+ *
+ * If you change something here, please remember to update fix_driveid() in
+ * ide/probe.c.
+ */
+struct hd_driveid {
+	unsigned short	config;		/* lots of obsolete bit flags */
+	unsigned short	cyls;		/* Obsolete, "physical" cyls */
+	unsigned short	reserved2;	/* reserved (word 2) */
+	unsigned short	heads;		/* Obsolete, "physical" heads */
+	unsigned short	track_bytes;	/* unformatted bytes per track */
+	unsigned short	sector_bytes;	/* unformatted bytes per sector */
+	unsigned short	sectors;	/* Obsolete, "physical" sectors per track */
+	unsigned short	vendor0;	/* vendor unique */
+	unsigned short	vendor1;	/* vendor unique */
+	unsigned short	vendor2;	/* Retired vendor unique */
+	unsigned char	serial_no[20];	/* 0 = not_specified */
+	unsigned short	buf_type;	/* Retired */
+	unsigned short	buf_size;	/* Retired, 512 byte increments
+					 * 0 = not_specified
+					 */
+	unsigned short	ecc_bytes;	/* for r/w long cmds; 0 = not_specified */
+	unsigned char	fw_rev[8];	/* 0 = not_specified */
+	unsigned char	model[40];	/* 0 = not_specified */
+	unsigned char	max_multsect;	/* 0=not_implemented */
+	unsigned char	vendor3;	/* vendor unique */
+	unsigned short	dword_io;	/* 0=not_implemented; 1=implemented */
+	unsigned char	vendor4;	/* vendor unique */
+	unsigned char	capability;	/* (upper byte of word 49)
+					 *  3:	IORDYsup
+					 *  2:	IORDYsw
+					 *  1:	LBA
+					 *  0:	DMA
+					 */
+	unsigned short	reserved50;	/* reserved (word 50) */
+	unsigned char	vendor5;	/* Obsolete, vendor unique */
+	unsigned char	tPIO;		/* Obsolete, 0=slow, 1=medium, 2=fast */
+	unsigned char	vendor6;	/* Obsolete, vendor unique */
+	unsigned char	tDMA;		/* Obsolete, 0=slow, 1=medium, 2=fast */
+	unsigned short	field_valid;	/* (word 53)
+					 *  2:	ultra_ok	word  88
+					 *  1:	eide_ok		words 64-70
+					 *  0:	cur_ok		words 54-58
+					 */
+	unsigned short	cur_cyls;	/* Obsolete, logical cylinders */
+	unsigned short	cur_heads;	/* Obsolete, l heads */
+	unsigned short	cur_sectors;	/* Obsolete, l sectors per track */
+	unsigned short	cur_capacity0;	/* Obsolete, l total sectors on drive */
+	unsigned short	cur_capacity1;	/* Obsolete, (2 words, misaligned int)     */
+	unsigned char	multsect;	/* current multiple sector count */
+	unsigned char	multsect_valid;	/* when (bit0==1) multsect is ok */
+	unsigned int	lba_capacity;	/* Obsolete, total number of sectors */
+	unsigned short	dma_1word;	/* Obsolete, single-word dma info */
+	unsigned short	dma_mword;	/* multiple-word dma info */
+	unsigned short  eide_pio_modes; /* bits 0:mode3 1:mode4 */
+	unsigned short  eide_dma_min;	/* min mword dma cycle time (ns) */
+	unsigned short  eide_dma_time;	/* recommended mword dma cycle time (ns) */
+	unsigned short  eide_pio;       /* min cycle time (ns), no IORDY  */
+	unsigned short  eide_pio_iordy; /* min cycle time (ns), with IORDY */
+	unsigned short	words69_70[2];	/* reserved words 69-70
+					 * future command overlap and queuing
+					 */
+	unsigned short	words71_74[4];	/* reserved words 71-74
+					 * for IDENTIFY PACKET DEVICE command
+					 */
+	unsigned short  queue_depth;	/* (word 75)
+					 * 15:5	reserved
+					 *  4:0	Maximum queue depth -1
+					 */
+	unsigned short  words76_79[4];	/* reserved words 76-79 */
+	unsigned short  major_rev_num;	/* (word 80) */
+	unsigned short  minor_rev_num;	/* (word 81) */
+	unsigned short  command_set_1;	/* (word 82) supported
+					 * 15:	Obsolete
+					 * 14:	NOP command
+					 * 13:	READ_BUFFER
+					 * 12:	WRITE_BUFFER
+					 * 11:	Obsolete
+					 * 10:	Host Protected Area
+					 *  9:	DEVICE Reset
+					 *  8:	SERVICE Interrupt
+					 *  7:	Release Interrupt
+					 *  6:	look-ahead
+					 *  5:	write cache
+					 *  4:	PACKET Command
+					 *  3:	Power Management Feature Set
+					 *  2:	Removable Feature Set
+					 *  1:	Security Feature Set
+					 *  0:	SMART Feature Set
+					 */
+	unsigned short  command_set_2;	/* (word 83)
+					 * 15:	Shall be ZERO
+					 * 14:	Shall be ONE
+					 * 13:	FLUSH CACHE EXT
+					 * 12:	FLUSH CACHE
+					 * 11:	Device Configuration Overlay
+					 * 10:	48-bit Address Feature Set
+					 *  9:	Automatic Acoustic Management
+					 *  8:	SET MAX security
+					 *  7:	reserved 1407DT PARTIES
+					 *  6:	SetF sub-command Power-Up
+					 *  5:	Power-Up in Standby Feature Set
+					 *  4:	Removable Media Notification
+					 *  3:	APM Feature Set
+					 *  2:	CFA Feature Set
+					 *  1:	READ/WRITE DMA QUEUED
+					 *  0:	Download MicroCode
+					 */
+	unsigned short  cfsse;		/* (word 84)
+					 * cmd set-feature supported extensions
+					 * 15:	Shall be ZERO
+					 * 14:	Shall be ONE
+					 * 13:6	reserved
+					 *  5:	General Purpose Logging
+					 *  4:	Streaming Feature Set
+					 *  3:	Media Card Pass Through
+					 *  2:	Media Serial Number Valid
+					 *  1:	SMART selt-test supported
+					 *  0:	SMART error logging
+					 */
+	unsigned short  cfs_enable_1;	/* (word 85)
+					 * command set-feature enabled
+					 * 15:	Obsolete
+					 * 14:	NOP command
+					 * 13:	READ_BUFFER
+					 * 12:	WRITE_BUFFER
+					 * 11:	Obsolete
+					 * 10:	Host Protected Area
+					 *  9:	DEVICE Reset
+					 *  8:	SERVICE Interrupt
+					 *  7:	Release Interrupt
+					 *  6:	look-ahead
+					 *  5:	write cache
+					 *  4:	PACKET Command
+					 *  3:	Power Management Feature Set
+					 *  2:	Removable Feature Set
+					 *  1:	Security Feature Set
+					 *  0:	SMART Feature Set
+					 */
+	unsigned short  cfs_enable_2;	/* (word 86)
+					 * command set-feature enabled
+					 * 15:	Shall be ZERO
+					 * 14:	Shall be ONE
+					 * 13:	FLUSH CACHE EXT
+					 * 12:	FLUSH CACHE
+					 * 11:	Device Configuration Overlay
+					 * 10:	48-bit Address Feature Set
+					 *  9:	Automatic Acoustic Management
+					 *  8:	SET MAX security
+					 *  7:	reserved 1407DT PARTIES
+					 *  6:	SetF sub-command Power-Up
+					 *  5:	Power-Up in Standby Feature Set
+					 *  4:	Removable Media Notification
+					 *  3:	APM Feature Set
+					 *  2:	CFA Feature Set
+					 *  1:	READ/WRITE DMA QUEUED
+					 *  0:	Download MicroCode
+					 */
+	unsigned short  csf_default;	/* (word 87)
+					 * command set-feature default
+					 * 15:	Shall be ZERO
+					 * 14:	Shall be ONE
+					 * 13:6	reserved
+					 *  5:	General Purpose Logging enabled
+					 *  4:	Valid CONFIGURE STREAM executed
+					 *  3:	Media Card Pass Through enabled
+					 *  2:	Media Serial Number Valid
+					 *  1:	SMART selt-test supported
+					 *  0:	SMART error logging
+					 */
+	unsigned short  dma_ultra;	/* (word 88) */
+	unsigned short	trseuc;		/* time required for security erase */
+	unsigned short	trsEuc;		/* time required for enhanced erase */
+	unsigned short	CurAPMvalues;	/* current APM values */
+	unsigned short	mprc;		/* master password revision code */
+	unsigned short	hw_config;	/* hardware config (word 93)
+					 * 15:	Shall be ZERO
+					 * 14:	Shall be ONE
+					 * 13:
+					 * 12:
+					 * 11:
+					 * 10:
+					 *  9:
+					 *  8:
+					 *  7:
+					 *  6:
+					 *  5:
+					 *  4:
+					 *  3:
+					 *  2:
+					 *  1:
+					 *  0:	Shall be ONE
+					 */
+	unsigned short	acoustic;	/* (word 94)
+					 * 15:8	Vendor's recommended value
+					 *  7:0	current value
+					 */
+	unsigned short	msrqs;		/* min stream request size */
+	unsigned short	sxfert;		/* stream transfer time */
+	unsigned short	sal;		/* stream access latency */
+	unsigned int	spg;		/* stream performance granularity */
+	unsigned long long lba_capacity_2;/* 48-bit total number of sectors */
+	unsigned short	words104_125[22];/* reserved words 104-125 */
+	unsigned short	last_lun;	/* (word 126) */
+	unsigned short	word127;	/* (word 127) Feature Set
+					 * Removable Media Notification
+					 * 15:2	reserved
+					 *  1:0	00 = not supported
+					 *	01 = supported
+					 *	10 = reserved
+					 *	11 = reserved
+					 */
+	unsigned short	dlf;		/* (word 128)
+					 * device lock function
+					 * 15:9	reserved
+					 *  8	security level 1:max 0:high
+					 *  7:6	reserved
+					 *  5	enhanced erase
+					 *  4	expire
+					 *  3	frozen
+					 *  2	locked
+					 *  1	en/disabled
+					 *  0	capability
+					 */
+	unsigned short  csfo;		/*  (word 129)
+					 * current set features options
+					 * 15:4	reserved
+					 *  3:	auto reassign
+					 *  2:	reverting
+					 *  1:	read-look-ahead
+					 *  0:	write cache
+					 */
+	unsigned short	words130_155[26];/* reserved vendor words 130-155 */
+	unsigned short	word156;	/* reserved vendor word 156 */
+	unsigned short	words157_159[3];/* reserved vendor words 157-159 */
+	unsigned short	cfa_power;	/* (word 160) CFA Power Mode
+					 * 15 word 160 supported
+					 * 14 reserved
+					 * 13
+					 * 12
+					 * 11:0
+					 */
+	unsigned short	words161_175[15];/* Reserved for CFA */
+	unsigned short	words176_205[30];/* Current Media Serial Number */
+	unsigned short	words206_254[49];/* reserved words 206-254 */
+	unsigned short	integrity_word;	/* (word 255)
+					 * 15:8 Checksum
+					 *  7:0 Signature
+					 */
+};
+#endif /* __KERNEL__ */
+
+/*
+ * IDE "nice" flags. These are used on a per drive basis to determine
+ * when to be nice and give more bandwidth to the other devices which
+ * share the same IDE bus.
+ */
+#define IDE_NICE_DSC_OVERLAP	(0)	/* per the DSC overlap protocol */
+#define IDE_NICE_ATAPI_OVERLAP	(1)	/* not supported yet */
+#define IDE_NICE_1		(3)	/* when probably won't affect us much */
+#ifndef __KERNEL__
+#define IDE_NICE_0		(2)	/* when sure that it won't affect us */
+#define IDE_NICE_2		(4)	/* when we know it's on our expense */
+#endif
+
+#endif	/* _LINUX_HDREG_H */
diff --git a/include/uapi/linux/hid.h b/include/uapi/linux/hid.h
new file mode 100644
index 00000000000..b60f4842bd9
--- /dev/null
+++ b/include/uapi/linux/hid.h
@@ -0,0 +1,66 @@
+/*
+ *  Copyright (c) 1999 Andreas Gal
+ *  Copyright (c) 2000-2001 Vojtech Pavlik
+ *  Copyright (c) 2006-2007 Jiri Kosina
+ */
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+#ifndef _UAPI__HID_H
+#define _UAPI__HID_H
+
+
+
+/*
+ * USB HID (Human Interface Device) interface class code
+ */
+
+#define USB_INTERFACE_CLASS_HID		3
+
+/*
+ * USB HID interface subclass and protocol codes
+ */
+
+#define USB_INTERFACE_SUBCLASS_BOOT	1
+#define USB_INTERFACE_PROTOCOL_KEYBOARD	1
+#define USB_INTERFACE_PROTOCOL_MOUSE	2
+
+/*
+ * HID class requests
+ */
+
+#define HID_REQ_GET_REPORT		0x01
+#define HID_REQ_GET_IDLE		0x02
+#define HID_REQ_GET_PROTOCOL		0x03
+#define HID_REQ_SET_REPORT		0x09
+#define HID_REQ_SET_IDLE		0x0A
+#define HID_REQ_SET_PROTOCOL		0x0B
+
+/*
+ * HID class descriptor types
+ */
+
+#define HID_DT_HID			(USB_TYPE_CLASS | 0x01)
+#define HID_DT_REPORT			(USB_TYPE_CLASS | 0x02)
+#define HID_DT_PHYSICAL			(USB_TYPE_CLASS | 0x03)
+
+#define HID_MAX_DESCRIPTOR_SIZE		4096
+
+
+#endif /* _UAPI__HID_H */
diff --git a/include/uapi/linux/hiddev.h b/include/uapi/linux/hiddev.h
new file mode 100644
index 00000000000..7df7884bf5c
--- /dev/null
+++ b/include/uapi/linux/hiddev.h
@@ -0,0 +1,212 @@
+/*
+ *  Copyright (c) 1999-2000 Vojtech Pavlik
+ *
+ *  Sponsored by SuSE
+ */
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or 
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * 
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail:
+ * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic
+ */
+#ifndef _UAPI_HIDDEV_H
+#define _UAPI_HIDDEV_H
+
+
+
+#include <linux/types.h>
+
+/*
+ * The event structure itself
+ */
+
+struct hiddev_event {
+	unsigned hid;
+	signed int value;
+};
+
+struct hiddev_devinfo {
+	__u32 bustype;
+	__u32 busnum;
+	__u32 devnum;
+	__u32 ifnum;
+	__s16 vendor;
+	__s16 product;
+	__s16 version;
+	__u32 num_applications;
+};
+
+struct hiddev_collection_info {
+	__u32 index;
+	__u32 type;
+	__u32 usage;
+	__u32 level;
+};
+
+#define HID_STRING_SIZE 256
+struct hiddev_string_descriptor {
+	__s32 index;
+	char value[HID_STRING_SIZE];
+};
+
+struct hiddev_report_info {
+	__u32 report_type;
+	__u32 report_id;
+	__u32 num_fields;
+};
+
+/* To do a GUSAGE/SUSAGE, fill in at least usage_code,  report_type and 
+ * report_id.  Set report_id to REPORT_ID_UNKNOWN if the rest of the fields 
+ * are unknown.  Otherwise use a usage_ref struct filled in from a previous 
+ * successful GUSAGE call to save time.  To actually send a value to the
+ * device, perform a SUSAGE first, followed by a SREPORT.  An INITREPORT or a
+ * GREPORT isn't necessary for a GUSAGE to return valid data.
+ */
+#define HID_REPORT_ID_UNKNOWN 0xffffffff
+#define HID_REPORT_ID_FIRST   0x00000100
+#define HID_REPORT_ID_NEXT    0x00000200
+#define HID_REPORT_ID_MASK    0x000000ff
+#define HID_REPORT_ID_MAX     0x000000ff
+
+#define HID_REPORT_TYPE_INPUT	1
+#define HID_REPORT_TYPE_OUTPUT	2
+#define HID_REPORT_TYPE_FEATURE	3
+#define HID_REPORT_TYPE_MIN     1
+#define HID_REPORT_TYPE_MAX     3
+
+struct hiddev_field_info {
+	__u32 report_type;
+	__u32 report_id;
+	__u32 field_index;
+	__u32 maxusage;
+	__u32 flags;
+	__u32 physical;		/* physical usage for this field */
+	__u32 logical;		/* logical usage for this field */
+	__u32 application;		/* application usage for this field */
+	__s32 logical_minimum;
+	__s32 logical_maximum;
+	__s32 physical_minimum;
+	__s32 physical_maximum;
+	__u32 unit_exponent;
+	__u32 unit;
+};
+
+/* Fill in report_type, report_id and field_index to get the information on a
+ * field.
+ */
+#define HID_FIELD_CONSTANT		0x001
+#define HID_FIELD_VARIABLE		0x002
+#define HID_FIELD_RELATIVE		0x004
+#define HID_FIELD_WRAP			0x008	
+#define HID_FIELD_NONLINEAR		0x010
+#define HID_FIELD_NO_PREFERRED		0x020
+#define HID_FIELD_NULL_STATE		0x040
+#define HID_FIELD_VOLATILE		0x080
+#define HID_FIELD_BUFFERED_BYTE		0x100
+
+struct hiddev_usage_ref {
+	__u32 report_type;
+	__u32 report_id;
+	__u32 field_index;
+	__u32 usage_index;
+	__u32 usage_code;
+	__s32 value;
+};
+
+/* hiddev_usage_ref_multi is used for sending multiple bytes to a control.
+ * It really manifests itself as setting the value of consecutive usages */
+#define HID_MAX_MULTI_USAGES 1024
+struct hiddev_usage_ref_multi {
+	struct hiddev_usage_ref uref;
+	__u32 num_values;
+	__s32 values[HID_MAX_MULTI_USAGES];
+};
+
+/* FIELD_INDEX_NONE is returned in read() data from the kernel when flags
+ * is set to (HIDDEV_FLAG_UREF | HIDDEV_FLAG_REPORT) and a new report has
+ * been sent by the device 
+ */
+#define HID_FIELD_INDEX_NONE 0xffffffff
+
+/*
+ * Protocol version.
+ */
+
+#define HID_VERSION		0x010004
+
+/*
+ * IOCTLs (0x00 - 0x7f)
+ */
+
+#define HIDIOCGVERSION		_IOR('H', 0x01, int)
+#define HIDIOCAPPLICATION	_IO('H', 0x02)
+#define HIDIOCGDEVINFO		_IOR('H', 0x03, struct hiddev_devinfo)
+#define HIDIOCGSTRING		_IOR('H', 0x04, struct hiddev_string_descriptor)
+#define HIDIOCINITREPORT	_IO('H', 0x05)
+#define HIDIOCGNAME(len)	_IOC(_IOC_READ, 'H', 0x06, len)
+#define HIDIOCGREPORT		_IOW('H', 0x07, struct hiddev_report_info)
+#define HIDIOCSREPORT		_IOW('H', 0x08, struct hiddev_report_info)
+#define HIDIOCGREPORTINFO	_IOWR('H', 0x09, struct hiddev_report_info)
+#define HIDIOCGFIELDINFO	_IOWR('H', 0x0A, struct hiddev_field_info)
+#define HIDIOCGUSAGE		_IOWR('H', 0x0B, struct hiddev_usage_ref)
+#define HIDIOCSUSAGE		_IOW('H', 0x0C, struct hiddev_usage_ref)
+#define HIDIOCGUCODE		_IOWR('H', 0x0D, struct hiddev_usage_ref)
+#define HIDIOCGFLAG		_IOR('H', 0x0E, int)
+#define HIDIOCSFLAG		_IOW('H', 0x0F, int)
+#define HIDIOCGCOLLECTIONINDEX	_IOW('H', 0x10, struct hiddev_usage_ref)
+#define HIDIOCGCOLLECTIONINFO	_IOWR('H', 0x11, struct hiddev_collection_info)
+#define HIDIOCGPHYS(len)	_IOC(_IOC_READ, 'H', 0x12, len)
+
+/* For writing/reading to multiple/consecutive usages */
+#define HIDIOCGUSAGES		_IOWR('H', 0x13, struct hiddev_usage_ref_multi)
+#define HIDIOCSUSAGES		_IOW('H', 0x14, struct hiddev_usage_ref_multi)
+
+/* 
+ * Flags to be used in HIDIOCSFLAG
+ */
+#define HIDDEV_FLAG_UREF	0x1
+#define HIDDEV_FLAG_REPORT	0x2
+#define HIDDEV_FLAGS		0x3
+
+/* To traverse the input report descriptor info for a HID device, perform the 
+ * following:
+ *
+ * rinfo.report_type = HID_REPORT_TYPE_INPUT;
+ * rinfo.report_id = HID_REPORT_ID_FIRST;
+ * ret = ioctl(fd, HIDIOCGREPORTINFO, &rinfo);
+ *
+ * while (ret >= 0) {
+ * 	for (i = 0; i < rinfo.num_fields; i++) {
+ * 		finfo.report_type = rinfo.report_type;
+ * 		finfo.report_id = rinfo.report_id;
+ * 		finfo.field_index = i;
+ * 		ioctl(fd, HIDIOCGFIELDINFO, &finfo);
+ * 		for (j = 0; j < finfo.maxusage; j++) {
+ * 			uref.report_type = rinfo.report_type;
+ * 			uref.report_id = rinfo.report_id;
+ * 			uref.field_index = i;
+ * 			uref.usage_index = j;
+ * 			ioctl(fd, HIDIOCGUCODE, &uref);
+ * 			ioctl(fd, HIDIOCGUSAGE, &uref);
+ * 		}
+ * 	}
+ * 	rinfo.report_id |= HID_REPORT_ID_NEXT;
+ * 	ret = ioctl(fd, HIDIOCGREPORTINFO, &rinfo);
+ * }
+ */
+
+
+#endif /* _UAPI_HIDDEV_H */
diff --git a/include/uapi/linux/hidraw.h b/include/uapi/linux/hidraw.h
new file mode 100644
index 00000000000..f5b732979a7
--- /dev/null
+++ b/include/uapi/linux/hidraw.h
@@ -0,0 +1,50 @@
+/*
+ *  Copyright (c) 2007 Jiri Kosina
+ */
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef _UAPI_HIDRAW_H
+#define _UAPI_HIDRAW_H
+
+
+
+#include <linux/hid.h>
+#include <linux/types.h>
+
+struct hidraw_report_descriptor {
+	__u32 size;
+	__u8 value[HID_MAX_DESCRIPTOR_SIZE];
+};
+
+struct hidraw_devinfo {
+	__u32 bustype;
+	__s16 vendor;
+	__s16 product;
+};
+
+/* ioctl interface */
+#define HIDIOCGRDESCSIZE	_IOR('H', 0x01, int)
+#define HIDIOCGRDESC		_IOR('H', 0x02, struct hidraw_report_descriptor)
+#define HIDIOCGRAWINFO		_IOR('H', 0x03, struct hidraw_devinfo)
+#define HIDIOCGRAWNAME(len)     _IOC(_IOC_READ, 'H', 0x04, len)
+#define HIDIOCGRAWPHYS(len)     _IOC(_IOC_READ, 'H', 0x05, len)
+/* The first byte of SFEATURE and GFEATURE is the report number */
+#define HIDIOCSFEATURE(len)    _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x06, len)
+#define HIDIOCGFEATURE(len)    _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x07, len)
+
+#define HIDRAW_FIRST_MINOR 0
+#define HIDRAW_MAX_DEVICES 64
+/* number of reports to buffer */
+#define HIDRAW_BUFFER_SIZE 64
+
+
+/* kernel-only API declarations */
+
+#endif /* _UAPI_HIDRAW_H */
diff --git a/include/uapi/linux/hpet.h b/include/uapi/linux/hpet.h
new file mode 100644
index 00000000000..8af3c70abc8
--- /dev/null
+++ b/include/uapi/linux/hpet.h
@@ -0,0 +1,25 @@
+#ifndef _UAPI__HPET__
+#define _UAPI__HPET__
+
+#include <linux/compiler.h>
+
+
+struct hpet_info {
+	unsigned long hi_ireqfreq;	/* Hz */
+	unsigned long hi_flags;	/* information */
+	unsigned short hi_hpet;
+	unsigned short hi_timer;
+};
+
+#define HPET_INFO_PERIODIC	0x0010	/* periodic-capable comparator */
+
+#define	HPET_IE_ON	_IO('h', 0x01)	/* interrupt on */
+#define	HPET_IE_OFF	_IO('h', 0x02)	/* interrupt off */
+#define	HPET_INFO	_IOR('h', 0x03, struct hpet_info)
+#define	HPET_EPI	_IO('h', 0x04)	/* enable periodic */
+#define	HPET_DPI	_IO('h', 0x05)	/* disable periodic */
+#define	HPET_IRQFREQ	_IOW('h', 0x6, unsigned long)	/* IRQFREQ usec */
+
+#define MAX_HPET_TBS	8		/* maximum hpet timer blocks */
+
+#endif /* _UAPI__HPET__ */
diff --git a/include/uapi/linux/hysdn_if.h b/include/uapi/linux/hysdn_if.h
new file mode 100644
index 00000000000..00236ae3b04
--- /dev/null
+++ b/include/uapi/linux/hysdn_if.h
@@ -0,0 +1,33 @@
+/* $Id: hysdn_if.h,v 1.1.8.3 2001/09/23 22:25:05 kai Exp $
+ *
+ * Linux driver for HYSDN cards
+ * ioctl definitions shared by hynetmgr and driver.
+ *
+ * Author    Werner Cornelius (werner@titro.de) for Hypercope GmbH
+ * Copyright 1999 by Werner Cornelius (werner@titro.de)
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+/****************/
+/* error values */
+/****************/
+#define ERR_NONE             0 /* no error occurred */
+#define ERR_ALREADY_BOOT  1000 /* we are already booting */
+#define EPOF_BAD_MAGIC    1001 /* bad magic in POF header */
+#define ERR_BOARD_DPRAM   1002 /* board DPRAM failed */
+#define EPOF_INTERNAL     1003 /* internal POF handler error */
+#define EPOF_BAD_IMG_SIZE 1004 /* POF boot image size invalid */
+#define ERR_BOOTIMG_FAIL  1005 /* 1. stage boot image did not start */
+#define ERR_BOOTSEQ_FAIL  1006 /* 2. stage boot seq handshake timeout */
+#define ERR_POF_TIMEOUT   1007 /* timeout waiting for card pof ready */
+#define ERR_NOT_BOOTED    1008 /* operation only allowed when booted */
+#define ERR_CONF_LONG     1009 /* conf line is too long */ 
+#define ERR_INV_CHAN      1010 /* invalid channel number */ 
+#define ERR_ASYNC_TIME    1011 /* timeout sending async data */ 
+
+
+
+
diff --git a/include/uapi/linux/i2c-dev.h b/include/uapi/linux/i2c-dev.h
new file mode 100644
index 00000000000..3f311551795
--- /dev/null
+++ b/include/uapi/linux/i2c-dev.h
@@ -0,0 +1,72 @@
+/*
+    i2c-dev.h - i2c-bus driver, char device interface
+
+    Copyright (C) 1995-97 Simon G. Vogl
+    Copyright (C) 1998-99 Frodo Looijaard <frodol@dds.nl>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+    MA 02110-1301 USA.
+*/
+
+#ifndef _UAPI_LINUX_I2C_DEV_H
+#define _UAPI_LINUX_I2C_DEV_H
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+
+/* /dev/i2c-X ioctl commands.  The ioctl's parameter is always an
+ * unsigned long, except for:
+ *	- I2C_FUNCS, takes pointer to an unsigned long
+ *	- I2C_RDWR, takes pointer to struct i2c_rdwr_ioctl_data
+ *	- I2C_SMBUS, takes pointer to struct i2c_smbus_ioctl_data
+ */
+#define I2C_RETRIES	0x0701	/* number of times a device address should
+				   be polled when not acknowledging */
+#define I2C_TIMEOUT	0x0702	/* set timeout in units of 10 ms */
+
+/* NOTE: Slave address is 7 or 10 bits, but 10-bit addresses
+ * are NOT supported! (due to code brokenness)
+ */
+#define I2C_SLAVE	0x0703	/* Use this slave address */
+#define I2C_SLAVE_FORCE	0x0706	/* Use this slave address, even if it
+				   is already in use by a driver! */
+#define I2C_TENBIT	0x0704	/* 0 for 7 bit addrs, != 0 for 10 bit */
+
+#define I2C_FUNCS	0x0705	/* Get the adapter functionality mask */
+
+#define I2C_RDWR	0x0707	/* Combined R/W transfer (one STOP only) */
+
+#define I2C_PEC		0x0708	/* != 0 to use PEC with SMBus */
+#define I2C_SMBUS	0x0720	/* SMBus transfer */
+
+
+/* This is the structure as used in the I2C_SMBUS ioctl call */
+struct i2c_smbus_ioctl_data {
+	__u8 read_write;
+	__u8 command;
+	__u32 size;
+	union i2c_smbus_data __user *data;
+};
+
+/* This is the structure as used in the I2C_RDWR ioctl call */
+struct i2c_rdwr_ioctl_data {
+	struct i2c_msg __user *msgs;	/* pointers to i2c_msgs */
+	__u32 nmsgs;			/* number of i2c_msgs */
+};
+
+#define  I2C_RDRW_IOCTL_MAX_MSGS	42
+
+
+#endif /* _UAPI_LINUX_I2C_DEV_H */
diff --git a/include/uapi/linux/i2c.h b/include/uapi/linux/i2c.h
new file mode 100644
index 00000000000..0e949cbfd33
--- /dev/null
+++ b/include/uapi/linux/i2c.h
@@ -0,0 +1,151 @@
+/* ------------------------------------------------------------------------- */
+/*									     */
+/* i2c.h - definitions for the i2c-bus interface			     */
+/*									     */
+/* ------------------------------------------------------------------------- */
+/*   Copyright (C) 1995-2000 Simon G. Vogl
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+    MA 02110-1301 USA.							     */
+/* ------------------------------------------------------------------------- */
+
+/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
+   Frodo Looijaard <frodol@dds.nl> */
+
+#ifndef _UAPI_LINUX_I2C_H
+#define _UAPI_LINUX_I2C_H
+
+#include <linux/types.h>
+
+/**
+ * struct i2c_msg - an I2C transaction segment beginning with START
+ * @addr: Slave address, either seven or ten bits.  When this is a ten
+ *	bit address, I2C_M_TEN must be set in @flags and the adapter
+ *	must support I2C_FUNC_10BIT_ADDR.
+ * @flags: I2C_M_RD is handled by all adapters.  No other flags may be
+ *	provided unless the adapter exported the relevant I2C_FUNC_*
+ *	flags through i2c_check_functionality().
+ * @len: Number of data bytes in @buf being read from or written to the
+ *	I2C slave address.  For read transactions where I2C_M_RECV_LEN
+ *	is set, the caller guarantees that this buffer can hold up to
+ *	32 bytes in addition to the initial length byte sent by the
+ *	slave (plus, if used, the SMBus PEC); and this value will be
+ *	incremented by the number of block data bytes received.
+ * @buf: The buffer into which data is read, or from which it's written.
+ *
+ * An i2c_msg is the low level representation of one segment of an I2C
+ * transaction.  It is visible to drivers in the @i2c_transfer() procedure,
+ * to userspace from i2c-dev, and to I2C adapter drivers through the
+ * @i2c_adapter.@master_xfer() method.
+ *
+ * Except when I2C "protocol mangling" is used, all I2C adapters implement
+ * the standard rules for I2C transactions.  Each transaction begins with a
+ * START.  That is followed by the slave address, and a bit encoding read
+ * versus write.  Then follow all the data bytes, possibly including a byte
+ * with SMBus PEC.  The transfer terminates with a NAK, or when all those
+ * bytes have been transferred and ACKed.  If this is the last message in a
+ * group, it is followed by a STOP.  Otherwise it is followed by the next
+ * @i2c_msg transaction segment, beginning with a (repeated) START.
+ *
+ * Alternatively, when the adapter supports I2C_FUNC_PROTOCOL_MANGLING then
+ * passing certain @flags may have changed those standard protocol behaviors.
+ * Those flags are only for use with broken/nonconforming slaves, and with
+ * adapters which are known to support the specific mangling options they
+ * need (one or more of IGNORE_NAK, NO_RD_ACK, NOSTART, and REV_DIR_ADDR).
+ */
+struct i2c_msg {
+	__u16 addr;	/* slave address			*/
+	__u16 flags;
+#define I2C_M_TEN		0x0010	/* this is a ten bit chip address */
+#define I2C_M_RD		0x0001	/* read data, from slave to master */
+#define I2C_M_STOP		0x8000	/* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_NOSTART		0x4000	/* if I2C_FUNC_NOSTART */
+#define I2C_M_REV_DIR_ADDR	0x2000	/* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_IGNORE_NAK	0x1000	/* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_NO_RD_ACK		0x0800	/* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_RECV_LEN		0x0400	/* length will be first received byte */
+	__u16 len;		/* msg length				*/
+	__u8 *buf;		/* pointer to msg data			*/
+};
+
+/* To determine what functionality is present */
+
+#define I2C_FUNC_I2C			0x00000001
+#define I2C_FUNC_10BIT_ADDR		0x00000002
+#define I2C_FUNC_PROTOCOL_MANGLING	0x00000004 /* I2C_M_IGNORE_NAK etc. */
+#define I2C_FUNC_SMBUS_PEC		0x00000008
+#define I2C_FUNC_NOSTART		0x00000010 /* I2C_M_NOSTART */
+#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL	0x00008000 /* SMBus 2.0 */
+#define I2C_FUNC_SMBUS_QUICK		0x00010000
+#define I2C_FUNC_SMBUS_READ_BYTE	0x00020000
+#define I2C_FUNC_SMBUS_WRITE_BYTE	0x00040000
+#define I2C_FUNC_SMBUS_READ_BYTE_DATA	0x00080000
+#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA	0x00100000
+#define I2C_FUNC_SMBUS_READ_WORD_DATA	0x00200000
+#define I2C_FUNC_SMBUS_WRITE_WORD_DATA	0x00400000
+#define I2C_FUNC_SMBUS_PROC_CALL	0x00800000
+#define I2C_FUNC_SMBUS_READ_BLOCK_DATA	0x01000000
+#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000
+#define I2C_FUNC_SMBUS_READ_I2C_BLOCK	0x04000000 /* I2C-like block xfer  */
+#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK	0x08000000 /* w/ 1-byte reg. addr. */
+
+#define I2C_FUNC_SMBUS_BYTE		(I2C_FUNC_SMBUS_READ_BYTE | \
+					 I2C_FUNC_SMBUS_WRITE_BYTE)
+#define I2C_FUNC_SMBUS_BYTE_DATA	(I2C_FUNC_SMBUS_READ_BYTE_DATA | \
+					 I2C_FUNC_SMBUS_WRITE_BYTE_DATA)
+#define I2C_FUNC_SMBUS_WORD_DATA	(I2C_FUNC_SMBUS_READ_WORD_DATA | \
+					 I2C_FUNC_SMBUS_WRITE_WORD_DATA)
+#define I2C_FUNC_SMBUS_BLOCK_DATA	(I2C_FUNC_SMBUS_READ_BLOCK_DATA | \
+					 I2C_FUNC_SMBUS_WRITE_BLOCK_DATA)
+#define I2C_FUNC_SMBUS_I2C_BLOCK	(I2C_FUNC_SMBUS_READ_I2C_BLOCK | \
+					 I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)
+
+#define I2C_FUNC_SMBUS_EMUL		(I2C_FUNC_SMBUS_QUICK | \
+					 I2C_FUNC_SMBUS_BYTE | \
+					 I2C_FUNC_SMBUS_BYTE_DATA | \
+					 I2C_FUNC_SMBUS_WORD_DATA | \
+					 I2C_FUNC_SMBUS_PROC_CALL | \
+					 I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \
+					 I2C_FUNC_SMBUS_I2C_BLOCK | \
+					 I2C_FUNC_SMBUS_PEC)
+
+/*
+ * Data for SMBus Messages
+ */
+#define I2C_SMBUS_BLOCK_MAX	32	/* As specified in SMBus standard */
+union i2c_smbus_data {
+	__u8 byte;
+	__u16 word;
+	__u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */
+			       /* and one more for user-space compatibility */
+};
+
+/* i2c_smbus_xfer read or write markers */
+#define I2C_SMBUS_READ	1
+#define I2C_SMBUS_WRITE	0
+
+/* SMBus transaction types (size parameter in the above functions)
+   Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */
+#define I2C_SMBUS_QUICK		    0
+#define I2C_SMBUS_BYTE		    1
+#define I2C_SMBUS_BYTE_DATA	    2
+#define I2C_SMBUS_WORD_DATA	    3
+#define I2C_SMBUS_PROC_CALL	    4
+#define I2C_SMBUS_BLOCK_DATA	    5
+#define I2C_SMBUS_I2C_BLOCK_BROKEN  6
+#define I2C_SMBUS_BLOCK_PROC_CALL   7		/* SMBus 2.0 */
+#define I2C_SMBUS_I2C_BLOCK_DATA    8
+
+#endif /* _UAPI_LINUX_I2C_H */
diff --git a/include/uapi/linux/i2o-dev.h b/include/uapi/linux/i2o-dev.h
new file mode 100644
index 00000000000..a8093bfec3a
--- /dev/null
+++ b/include/uapi/linux/i2o-dev.h
@@ -0,0 +1,421 @@
+/*
+ * I2O user space accessible structures/APIs
+ *
+ * (c) Copyright 1999, 2000 Red Hat Software
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ *************************************************************************
+ *
+ * This header file defines the I2O APIs that are available to both
+ * the kernel and user level applications.  Kernel specific structures
+ * are defined in i2o_osm. OSMs should include _only_ i2o_osm.h which
+ * automatically includes this file.
+ *
+ */
+
+#ifndef _I2O_DEV_H
+#define _I2O_DEV_H
+
+/* How many controllers are we allowing */
+#define MAX_I2O_CONTROLLERS	32
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+/*
+ * I2O Control IOCTLs and structures
+ */
+#define I2O_MAGIC_NUMBER	'i'
+#define I2OGETIOPS		_IOR(I2O_MAGIC_NUMBER,0,__u8[MAX_I2O_CONTROLLERS])
+#define I2OHRTGET		_IOWR(I2O_MAGIC_NUMBER,1,struct i2o_cmd_hrtlct)
+#define I2OLCTGET		_IOWR(I2O_MAGIC_NUMBER,2,struct i2o_cmd_hrtlct)
+#define I2OPARMSET		_IOWR(I2O_MAGIC_NUMBER,3,struct i2o_cmd_psetget)
+#define I2OPARMGET		_IOWR(I2O_MAGIC_NUMBER,4,struct i2o_cmd_psetget)
+#define I2OSWDL 		_IOWR(I2O_MAGIC_NUMBER,5,struct i2o_sw_xfer)
+#define I2OSWUL 		_IOWR(I2O_MAGIC_NUMBER,6,struct i2o_sw_xfer)
+#define I2OSWDEL		_IOWR(I2O_MAGIC_NUMBER,7,struct i2o_sw_xfer)
+#define I2OVALIDATE		_IOR(I2O_MAGIC_NUMBER,8,__u32)
+#define I2OHTML 		_IOWR(I2O_MAGIC_NUMBER,9,struct i2o_html)
+#define I2OEVTREG		_IOW(I2O_MAGIC_NUMBER,10,struct i2o_evt_id)
+#define I2OEVTGET		_IOR(I2O_MAGIC_NUMBER,11,struct i2o_evt_info)
+#define I2OPASSTHRU		_IOR(I2O_MAGIC_NUMBER,12,struct i2o_cmd_passthru)
+#define I2OPASSTHRU32		_IOR(I2O_MAGIC_NUMBER,12,struct i2o_cmd_passthru32)
+
+struct i2o_cmd_passthru32 {
+	unsigned int iop;	/* IOP unit number */
+	__u32 msg;		/* message */
+};
+
+struct i2o_cmd_passthru {
+	unsigned int iop;	/* IOP unit number */
+	void __user *msg;	/* message */
+};
+
+struct i2o_cmd_hrtlct {
+	unsigned int iop;	/* IOP unit number */
+	void __user *resbuf;	/* Buffer for result */
+	unsigned int __user *reslen;	/* Buffer length in bytes */
+};
+
+struct i2o_cmd_psetget {
+	unsigned int iop;	/* IOP unit number */
+	unsigned int tid;	/* Target device TID */
+	void __user *opbuf;	/* Operation List buffer */
+	unsigned int oplen;	/* Operation List buffer length in bytes */
+	void __user *resbuf;	/* Result List buffer */
+	unsigned int __user *reslen;	/* Result List buffer length in bytes */
+};
+
+struct i2o_sw_xfer {
+	unsigned int iop;	/* IOP unit number */
+	unsigned char flags;	/* Flags field */
+	unsigned char sw_type;	/* Software type */
+	unsigned int sw_id;	/* Software ID */
+	void __user *buf;	/* Pointer to software buffer */
+	unsigned int __user *swlen;	/* Length of software data */
+	unsigned int __user *maxfrag;	/* Maximum fragment count */
+	unsigned int __user *curfrag;	/* Current fragment count */
+};
+
+struct i2o_html {
+	unsigned int iop;	/* IOP unit number */
+	unsigned int tid;	/* Target device ID */
+	unsigned int page;	/* HTML page */
+	void __user *resbuf;	/* Buffer for reply HTML page */
+	unsigned int __user *reslen;	/* Length in bytes of reply buffer */
+	void __user *qbuf;	/* Pointer to HTTP query string */
+	unsigned int qlen;	/* Length in bytes of query string buffer */
+};
+
+#define I2O_EVT_Q_LEN 32
+
+struct i2o_evt_id {
+	unsigned int iop;
+	unsigned int tid;
+	unsigned int evt_mask;
+};
+
+/* Event data size = frame size - message header + evt indicator */
+#define I2O_EVT_DATA_SIZE 88
+
+struct i2o_evt_info {
+	struct i2o_evt_id id;
+	unsigned char evt_data[I2O_EVT_DATA_SIZE];
+	unsigned int data_size;
+};
+
+struct i2o_evt_get {
+	struct i2o_evt_info info;
+	int pending;
+	int lost;
+};
+
+typedef struct i2o_sg_io_hdr {
+	unsigned int flags;	/* see I2O_DPT_SG_IO_FLAGS */
+} i2o_sg_io_hdr_t;
+
+/**************************************************************************
+ * HRT related constants and structures
+ **************************************************************************/
+#define I2O_BUS_LOCAL	0
+#define I2O_BUS_ISA	1
+#define I2O_BUS_EISA	2
+/* was  I2O_BUS_MCA	3 */
+#define I2O_BUS_PCI	4
+#define I2O_BUS_PCMCIA	5
+#define I2O_BUS_NUBUS	6
+#define I2O_BUS_CARDBUS 7
+#define I2O_BUS_UNKNOWN 0x80
+
+typedef struct _i2o_pci_bus {
+	__u8 PciFunctionNumber;
+	__u8 PciDeviceNumber;
+	__u8 PciBusNumber;
+	__u8 reserved;
+	__u16 PciVendorID;
+	__u16 PciDeviceID;
+} i2o_pci_bus;
+
+typedef struct _i2o_local_bus {
+	__u16 LbBaseIOPort;
+	__u16 reserved;
+	__u32 LbBaseMemoryAddress;
+} i2o_local_bus;
+
+typedef struct _i2o_isa_bus {
+	__u16 IsaBaseIOPort;
+	__u8 CSN;
+	__u8 reserved;
+	__u32 IsaBaseMemoryAddress;
+} i2o_isa_bus;
+
+typedef struct _i2o_eisa_bus_info {
+	__u16 EisaBaseIOPort;
+	__u8 reserved;
+	__u8 EisaSlotNumber;
+	__u32 EisaBaseMemoryAddress;
+} i2o_eisa_bus;
+
+typedef struct _i2o_mca_bus {
+	__u16 McaBaseIOPort;
+	__u8 reserved;
+	__u8 McaSlotNumber;
+	__u32 McaBaseMemoryAddress;
+} i2o_mca_bus;
+
+typedef struct _i2o_other_bus {
+	__u16 BaseIOPort;
+	__u16 reserved;
+	__u32 BaseMemoryAddress;
+} i2o_other_bus;
+
+typedef struct _i2o_hrt_entry {
+	__u32 adapter_id;
+	__u32 parent_tid:12;
+	__u32 state:4;
+	__u32 bus_num:8;
+	__u32 bus_type:8;
+	union {
+		i2o_pci_bus pci_bus;
+		i2o_local_bus local_bus;
+		i2o_isa_bus isa_bus;
+		i2o_eisa_bus eisa_bus;
+		i2o_mca_bus mca_bus;
+		i2o_other_bus other_bus;
+	} bus;
+} i2o_hrt_entry;
+
+typedef struct _i2o_hrt {
+	__u16 num_entries;
+	__u8 entry_len;
+	__u8 hrt_version;
+	__u32 change_ind;
+	i2o_hrt_entry hrt_entry[1];
+} i2o_hrt;
+
+typedef struct _i2o_lct_entry {
+	__u32 entry_size:16;
+	__u32 tid:12;
+	__u32 reserved:4;
+	__u32 change_ind;
+	__u32 device_flags;
+	__u32 class_id:12;
+	__u32 version:4;
+	__u32 vendor_id:16;
+	__u32 sub_class;
+	__u32 user_tid:12;
+	__u32 parent_tid:12;
+	__u32 bios_info:8;
+	__u8 identity_tag[8];
+	__u32 event_capabilities;
+} i2o_lct_entry;
+
+typedef struct _i2o_lct {
+	__u32 table_size:16;
+	__u32 boot_tid:12;
+	__u32 lct_ver:4;
+	__u32 iop_flags;
+	__u32 change_ind;
+	i2o_lct_entry lct_entry[1];
+} i2o_lct;
+
+typedef struct _i2o_status_block {
+	__u16 org_id;
+	__u16 reserved;
+	__u16 iop_id:12;
+	__u16 reserved1:4;
+	__u16 host_unit_id;
+	__u16 segment_number:12;
+	__u16 i2o_version:4;
+	__u8 iop_state;
+	__u8 msg_type;
+	__u16 inbound_frame_size;
+	__u8 init_code;
+	__u8 reserved2;
+	__u32 max_inbound_frames;
+	__u32 cur_inbound_frames;
+	__u32 max_outbound_frames;
+	char product_id[24];
+	__u32 expected_lct_size;
+	__u32 iop_capabilities;
+	__u32 desired_mem_size;
+	__u32 current_mem_size;
+	__u32 current_mem_base;
+	__u32 desired_io_size;
+	__u32 current_io_size;
+	__u32 current_io_base;
+	__u32 reserved3:24;
+	__u32 cmd_status:8;
+} i2o_status_block;
+
+/* Event indicator mask flags */
+#define I2O_EVT_IND_STATE_CHANGE		0x80000000
+#define I2O_EVT_IND_GENERAL_WARNING		0x40000000
+#define I2O_EVT_IND_CONFIGURATION_FLAG		0x20000000
+#define I2O_EVT_IND_LOCK_RELEASE		0x10000000
+#define I2O_EVT_IND_CAPABILITY_CHANGE		0x08000000
+#define I2O_EVT_IND_DEVICE_RESET		0x04000000
+#define I2O_EVT_IND_EVT_MASK_MODIFIED		0x02000000
+#define I2O_EVT_IND_FIELD_MODIFIED		0x01000000
+#define I2O_EVT_IND_VENDOR_EVT			0x00800000
+#define I2O_EVT_IND_DEVICE_STATE		0x00400000
+
+/* Executive event indicitors */
+#define I2O_EVT_IND_EXEC_RESOURCE_LIMITS	0x00000001
+#define I2O_EVT_IND_EXEC_CONNECTION_FAIL	0x00000002
+#define I2O_EVT_IND_EXEC_ADAPTER_FAULT		0x00000004
+#define I2O_EVT_IND_EXEC_POWER_FAIL		0x00000008
+#define I2O_EVT_IND_EXEC_RESET_PENDING		0x00000010
+#define I2O_EVT_IND_EXEC_RESET_IMMINENT 	0x00000020
+#define I2O_EVT_IND_EXEC_HW_FAIL		0x00000040
+#define I2O_EVT_IND_EXEC_XCT_CHANGE		0x00000080
+#define I2O_EVT_IND_EXEC_NEW_LCT_ENTRY		0x00000100
+#define I2O_EVT_IND_EXEC_MODIFIED_LCT		0x00000200
+#define I2O_EVT_IND_EXEC_DDM_AVAILABILITY	0x00000400
+
+/* Random Block Storage Event Indicators */
+#define I2O_EVT_IND_BSA_VOLUME_LOAD		0x00000001
+#define I2O_EVT_IND_BSA_VOLUME_UNLOAD		0x00000002
+#define I2O_EVT_IND_BSA_VOLUME_UNLOAD_REQ	0x00000004
+#define I2O_EVT_IND_BSA_CAPACITY_CHANGE 	0x00000008
+#define I2O_EVT_IND_BSA_SCSI_SMART		0x00000010
+
+/* Event data for generic events */
+#define I2O_EVT_STATE_CHANGE_NORMAL		0x00
+#define I2O_EVT_STATE_CHANGE_SUSPENDED		0x01
+#define I2O_EVT_STATE_CHANGE_RESTART		0x02
+#define I2O_EVT_STATE_CHANGE_NA_RECOVER 	0x03
+#define I2O_EVT_STATE_CHANGE_NA_NO_RECOVER	0x04
+#define I2O_EVT_STATE_CHANGE_QUIESCE_REQUEST	0x05
+#define I2O_EVT_STATE_CHANGE_FAILED		0x10
+#define I2O_EVT_STATE_CHANGE_FAULTED		0x11
+
+#define I2O_EVT_GEN_WARNING_NORMAL		0x00
+#define I2O_EVT_GEN_WARNING_ERROR_THRESHOLD	0x01
+#define I2O_EVT_GEN_WARNING_MEDIA_FAULT 	0x02
+
+#define I2O_EVT_CAPABILITY_OTHER		0x01
+#define I2O_EVT_CAPABILITY_CHANGED		0x02
+
+#define I2O_EVT_SENSOR_STATE_CHANGED		0x01
+
+/*
+ *	I2O classes / subclasses
+ */
+
+/*  Class ID and Code Assignments
+ *  (LCT.ClassID.Version field)
+ */
+#define I2O_CLASS_VERSION_10			0x00
+#define I2O_CLASS_VERSION_11			0x01
+
+/*  Class code names
+ *  (from v1.5 Table 6-1 Class Code Assignments.)
+ */
+
+#define I2O_CLASS_EXECUTIVE			0x000
+#define I2O_CLASS_DDM				0x001
+#define I2O_CLASS_RANDOM_BLOCK_STORAGE		0x010
+#define I2O_CLASS_SEQUENTIAL_STORAGE		0x011
+#define I2O_CLASS_LAN				0x020
+#define I2O_CLASS_WAN				0x030
+#define I2O_CLASS_FIBRE_CHANNEL_PORT		0x040
+#define I2O_CLASS_FIBRE_CHANNEL_PERIPHERAL	0x041
+#define I2O_CLASS_SCSI_PERIPHERAL		0x051
+#define I2O_CLASS_ATE_PORT			0x060
+#define I2O_CLASS_ATE_PERIPHERAL		0x061
+#define I2O_CLASS_FLOPPY_CONTROLLER		0x070
+#define I2O_CLASS_FLOPPY_DEVICE 		0x071
+#define I2O_CLASS_BUS_ADAPTER			0x080
+#define I2O_CLASS_PEER_TRANSPORT_AGENT		0x090
+#define I2O_CLASS_PEER_TRANSPORT		0x091
+#define	I2O_CLASS_END				0xfff
+
+/*
+ *  Rest of 0x092 - 0x09f reserved for peer-to-peer classes
+ */
+
+#define I2O_CLASS_MATCH_ANYCLASS		0xffffffff
+
+/*
+ *  Subclasses
+ */
+
+#define I2O_SUBCLASS_i960			0x001
+#define I2O_SUBCLASS_HDM			0x020
+#define I2O_SUBCLASS_ISM			0x021
+
+/* Operation functions */
+
+#define I2O_PARAMS_FIELD_GET			0x0001
+#define I2O_PARAMS_LIST_GET			0x0002
+#define I2O_PARAMS_MORE_GET			0x0003
+#define I2O_PARAMS_SIZE_GET			0x0004
+#define I2O_PARAMS_TABLE_GET			0x0005
+#define I2O_PARAMS_FIELD_SET			0x0006
+#define I2O_PARAMS_LIST_SET			0x0007
+#define I2O_PARAMS_ROW_ADD			0x0008
+#define I2O_PARAMS_ROW_DELETE			0x0009
+#define I2O_PARAMS_TABLE_CLEAR			0x000A
+
+/*
+ * I2O serial number conventions / formats
+ * (circa v1.5)
+ */
+
+#define I2O_SNFORMAT_UNKNOWN			0
+#define I2O_SNFORMAT_BINARY			1
+#define I2O_SNFORMAT_ASCII			2
+#define I2O_SNFORMAT_UNICODE			3
+#define I2O_SNFORMAT_LAN48_MAC			4
+#define I2O_SNFORMAT_WAN			5
+
+/*
+ * Plus new in v2.0 (Yellowstone pdf doc)
+ */
+
+#define I2O_SNFORMAT_LAN64_MAC			6
+#define I2O_SNFORMAT_DDM			7
+#define I2O_SNFORMAT_IEEE_REG64 		8
+#define I2O_SNFORMAT_IEEE_REG128		9
+#define I2O_SNFORMAT_UNKNOWN2			0xff
+
+/*
+ *	I2O Get Status State values
+ */
+
+#define ADAPTER_STATE_INITIALIZING		0x01
+#define ADAPTER_STATE_RESET			0x02
+#define ADAPTER_STATE_HOLD			0x04
+#define ADAPTER_STATE_READY			0x05
+#define ADAPTER_STATE_OPERATIONAL		0x08
+#define ADAPTER_STATE_FAILED			0x10
+#define ADAPTER_STATE_FAULTED			0x11
+
+/*
+ *	Software module types
+ */
+#define I2O_SOFTWARE_MODULE_IRTOS		0x11
+#define I2O_SOFTWARE_MODULE_IOP_PRIVATE		0x22
+#define I2O_SOFTWARE_MODULE_IOP_CONFIG		0x23
+
+/*
+ *	Vendors
+ */
+#define I2O_VENDOR_DPT				0x001b
+
+/*
+ * DPT / Adaptec specific values for i2o_sg_io_hdr flags.
+ */
+#define I2O_DPT_SG_FLAG_INTERPRET		0x00010000
+#define I2O_DPT_SG_FLAG_PHYSICAL		0x00020000
+
+#define I2O_DPT_FLASH_FRAG_SIZE			0x10000
+#define I2O_DPT_FLASH_READ			0x0101
+#define I2O_DPT_FLASH_WRITE			0x0102
+
+#endif				/* _I2O_DEV_H */
diff --git a/include/uapi/linux/i8k.h b/include/uapi/linux/i8k.h
new file mode 100644
index 00000000000..1c45ba50511
--- /dev/null
+++ b/include/uapi/linux/i8k.h
@@ -0,0 +1,46 @@
+/*
+ * i8k.h -- Linux driver for accessing the SMM BIOS on Dell laptops
+ *
+ * Copyright (C) 2001  Massimo Dal Zotto <dz@debian.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef _LINUX_I8K_H
+#define _LINUX_I8K_H
+
+#define I8K_PROC		"/proc/i8k"
+#define I8K_PROC_FMT		"1.0"
+
+#define I8K_BIOS_VERSION	_IOR ('i', 0x80, int)	/* broken: meant 4 bytes */
+#define I8K_MACHINE_ID		_IOR ('i', 0x81, int)	/* broken: meant 16 bytes */
+#define I8K_POWER_STATUS	_IOR ('i', 0x82, size_t)
+#define I8K_FN_STATUS		_IOR ('i', 0x83, size_t)
+#define I8K_GET_TEMP		_IOR ('i', 0x84, size_t)
+#define I8K_GET_SPEED		_IOWR('i', 0x85, size_t)
+#define I8K_GET_FAN		_IOWR('i', 0x86, size_t)
+#define I8K_SET_FAN		_IOWR('i', 0x87, size_t)
+
+#define I8K_FAN_LEFT		1
+#define I8K_FAN_RIGHT		0
+#define I8K_FAN_OFF		0
+#define I8K_FAN_LOW		1
+#define I8K_FAN_HIGH		2
+#define I8K_FAN_MAX		I8K_FAN_HIGH
+
+#define I8K_VOL_UP		1
+#define I8K_VOL_DOWN		2
+#define I8K_VOL_MUTE		4
+
+#define I8K_AC			1
+#define I8K_BATTERY		0
+
+#endif
diff --git a/include/uapi/linux/icmp.h b/include/uapi/linux/icmp.h
new file mode 100644
index 00000000000..16fff055f73
--- /dev/null
+++ b/include/uapi/linux/icmp.h
@@ -0,0 +1,97 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the ICMP protocol.
+ *
+ * Version:	@(#)icmp.h	1.0.3	04/28/93
+ *
+ * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_LINUX_ICMP_H
+#define _UAPI_LINUX_ICMP_H
+
+#include <linux/types.h>
+
+#define ICMP_ECHOREPLY		0	/* Echo Reply			*/
+#define ICMP_DEST_UNREACH	3	/* Destination Unreachable	*/
+#define ICMP_SOURCE_QUENCH	4	/* Source Quench		*/
+#define ICMP_REDIRECT		5	/* Redirect (change route)	*/
+#define ICMP_ECHO		8	/* Echo Request			*/
+#define ICMP_TIME_EXCEEDED	11	/* Time Exceeded		*/
+#define ICMP_PARAMETERPROB	12	/* Parameter Problem		*/
+#define ICMP_TIMESTAMP		13	/* Timestamp Request		*/
+#define ICMP_TIMESTAMPREPLY	14	/* Timestamp Reply		*/
+#define ICMP_INFO_REQUEST	15	/* Information Request		*/
+#define ICMP_INFO_REPLY		16	/* Information Reply		*/
+#define ICMP_ADDRESS		17	/* Address Mask Request		*/
+#define ICMP_ADDRESSREPLY	18	/* Address Mask Reply		*/
+#define NR_ICMP_TYPES		18
+
+
+/* Codes for UNREACH. */
+#define ICMP_NET_UNREACH	0	/* Network Unreachable		*/
+#define ICMP_HOST_UNREACH	1	/* Host Unreachable		*/
+#define ICMP_PROT_UNREACH	2	/* Protocol Unreachable		*/
+#define ICMP_PORT_UNREACH	3	/* Port Unreachable		*/
+#define ICMP_FRAG_NEEDED	4	/* Fragmentation Needed/DF set	*/
+#define ICMP_SR_FAILED		5	/* Source Route failed		*/
+#define ICMP_NET_UNKNOWN	6
+#define ICMP_HOST_UNKNOWN	7
+#define ICMP_HOST_ISOLATED	8
+#define ICMP_NET_ANO		9
+#define ICMP_HOST_ANO		10
+#define ICMP_NET_UNR_TOS	11
+#define ICMP_HOST_UNR_TOS	12
+#define ICMP_PKT_FILTERED	13	/* Packet filtered */
+#define ICMP_PREC_VIOLATION	14	/* Precedence violation */
+#define ICMP_PREC_CUTOFF	15	/* Precedence cut off */
+#define NR_ICMP_UNREACH		15	/* instead of hardcoding immediate value */
+
+/* Codes for REDIRECT. */
+#define ICMP_REDIR_NET		0	/* Redirect Net			*/
+#define ICMP_REDIR_HOST		1	/* Redirect Host		*/
+#define ICMP_REDIR_NETTOS	2	/* Redirect Net for TOS		*/
+#define ICMP_REDIR_HOSTTOS	3	/* Redirect Host for TOS	*/
+
+/* Codes for TIME_EXCEEDED. */
+#define ICMP_EXC_TTL		0	/* TTL count exceeded		*/
+#define ICMP_EXC_FRAGTIME	1	/* Fragment Reass time exceeded	*/
+
+
+struct icmphdr {
+  __u8		type;
+  __u8		code;
+  __sum16	checksum;
+  union {
+	struct {
+		__be16	id;
+		__be16	sequence;
+	} echo;
+	__be32	gateway;
+	struct {
+		__be16	__unused;
+		__be16	mtu;
+	} frag;
+  } un;
+};
+
+
+/*
+ *	constants for (set|get)sockopt
+ */
+
+#define ICMP_FILTER			1
+
+struct icmp_filter {
+	__u32		data;
+};
+
+
+#endif /* _UAPI_LINUX_ICMP_H */
diff --git a/include/uapi/linux/icmpv6.h b/include/uapi/linux/icmpv6.h
new file mode 100644
index 00000000000..e0133c73c30
--- /dev/null
+++ b/include/uapi/linux/icmpv6.h
@@ -0,0 +1,164 @@
+#ifndef _UAPI_LINUX_ICMPV6_H
+#define _UAPI_LINUX_ICMPV6_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+struct icmp6hdr {
+
+	__u8		icmp6_type;
+	__u8		icmp6_code;
+	__sum16		icmp6_cksum;
+
+
+	union {
+		__be32			un_data32[1];
+		__be16			un_data16[2];
+		__u8			un_data8[4];
+
+		struct icmpv6_echo {
+			__be16		identifier;
+			__be16		sequence;
+		} u_echo;
+
+                struct icmpv6_nd_advt {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+                        __u32		reserved:5,
+                        		override:1,
+                        		solicited:1,
+                        		router:1,
+					reserved2:24;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+                        __u32		router:1,
+					solicited:1,
+                        		override:1,
+                        		reserved:29;
+#else
+#error	"Please fix <asm/byteorder.h>"
+#endif						
+                } u_nd_advt;
+
+                struct icmpv6_nd_ra {
+			__u8		hop_limit;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+			__u8		reserved:3,
+					router_pref:2,
+					home_agent:1,
+					other:1,
+					managed:1;
+
+#elif defined(__BIG_ENDIAN_BITFIELD)
+			__u8		managed:1,
+					other:1,
+					home_agent:1,
+					router_pref:2,
+					reserved:3;
+#else
+#error	"Please fix <asm/byteorder.h>"
+#endif
+			__be16		rt_lifetime;
+                } u_nd_ra;
+
+	} icmp6_dataun;
+
+#define icmp6_identifier	icmp6_dataun.u_echo.identifier
+#define icmp6_sequence		icmp6_dataun.u_echo.sequence
+#define icmp6_pointer		icmp6_dataun.un_data32[0]
+#define icmp6_mtu		icmp6_dataun.un_data32[0]
+#define icmp6_unused		icmp6_dataun.un_data32[0]
+#define icmp6_maxdelay		icmp6_dataun.un_data16[0]
+#define icmp6_router		icmp6_dataun.u_nd_advt.router
+#define icmp6_solicited		icmp6_dataun.u_nd_advt.solicited
+#define icmp6_override		icmp6_dataun.u_nd_advt.override
+#define icmp6_ndiscreserved	icmp6_dataun.u_nd_advt.reserved
+#define icmp6_hop_limit		icmp6_dataun.u_nd_ra.hop_limit
+#define icmp6_addrconf_managed	icmp6_dataun.u_nd_ra.managed
+#define icmp6_addrconf_other	icmp6_dataun.u_nd_ra.other
+#define icmp6_rt_lifetime	icmp6_dataun.u_nd_ra.rt_lifetime
+#define icmp6_router_pref	icmp6_dataun.u_nd_ra.router_pref
+};
+
+
+#define ICMPV6_ROUTER_PREF_LOW		0x3
+#define ICMPV6_ROUTER_PREF_MEDIUM	0x0
+#define ICMPV6_ROUTER_PREF_HIGH		0x1
+#define ICMPV6_ROUTER_PREF_INVALID	0x2
+
+#define ICMPV6_DEST_UNREACH		1
+#define ICMPV6_PKT_TOOBIG		2
+#define ICMPV6_TIME_EXCEED		3
+#define ICMPV6_PARAMPROB		4
+
+#define ICMPV6_INFOMSG_MASK		0x80
+
+#define ICMPV6_ECHO_REQUEST		128
+#define ICMPV6_ECHO_REPLY		129
+#define ICMPV6_MGM_QUERY		130
+#define ICMPV6_MGM_REPORT       	131
+#define ICMPV6_MGM_REDUCTION    	132
+
+#define ICMPV6_NI_QUERY			139
+#define ICMPV6_NI_REPLY			140
+
+#define ICMPV6_MLD2_REPORT		143
+
+#define ICMPV6_DHAAD_REQUEST		144
+#define ICMPV6_DHAAD_REPLY		145
+#define ICMPV6_MOBILE_PREFIX_SOL	146
+#define ICMPV6_MOBILE_PREFIX_ADV	147
+
+/*
+ *	Codes for Destination Unreachable
+ */
+#define ICMPV6_NOROUTE			0
+#define ICMPV6_ADM_PROHIBITED		1
+#define ICMPV6_NOT_NEIGHBOUR		2
+#define ICMPV6_ADDR_UNREACH		3
+#define ICMPV6_PORT_UNREACH		4
+
+/*
+ *	Codes for Time Exceeded
+ */
+#define ICMPV6_EXC_HOPLIMIT		0
+#define ICMPV6_EXC_FRAGTIME		1
+
+/*
+ *	Codes for Parameter Problem
+ */
+#define ICMPV6_HDR_FIELD		0
+#define ICMPV6_UNK_NEXTHDR		1
+#define ICMPV6_UNK_OPTION		2
+
+/*
+ *	constants for (set|get)sockopt
+ */
+
+#define ICMPV6_FILTER			1
+
+/*
+ *	ICMPV6 filter
+ */
+
+#define ICMPV6_FILTER_BLOCK		1
+#define ICMPV6_FILTER_PASS		2
+#define ICMPV6_FILTER_BLOCKOTHERS	3
+#define ICMPV6_FILTER_PASSONLY		4
+
+struct icmp6_filter {
+	__u32		data[8];
+};
+
+/*
+ *	Definitions for MLDv2
+ */
+#define MLD2_MODE_IS_INCLUDE	1
+#define MLD2_MODE_IS_EXCLUDE	2
+#define MLD2_CHANGE_TO_INCLUDE	3
+#define MLD2_CHANGE_TO_EXCLUDE	4
+#define MLD2_ALLOW_NEW_SOURCES	5
+#define MLD2_BLOCK_OLD_SOURCES	6
+
+#define MLD2_ALL_MCR_INIT { { { 0xff,0x02,0,0,0,0,0,0,0,0,0,0,0,0,0,0x16 } } }
+
+
+#endif /* _UAPI_LINUX_ICMPV6_H */
diff --git a/include/uapi/linux/if.h b/include/uapi/linux/if.h
new file mode 100644
index 00000000000..1ec407b01e4
--- /dev/null
+++ b/include/uapi/linux/if.h
@@ -0,0 +1,235 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for the INET interface module.
+ *
+ * Version:	@(#)if.h	1.0.2	04/18/93
+ *
+ * Authors:	Original taken from Berkeley UNIX 4.3, (c) UCB 1982-1988
+ *		Ross Biro
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_IF_H
+#define _LINUX_IF_H
+
+#include <linux/types.h>		/* for "__kernel_caddr_t" et al	*/
+#include <linux/socket.h>		/* for "struct sockaddr" et al	*/
+#include <linux/compiler.h>		/* for "__user" et al           */
+
+#define	IFNAMSIZ	16
+#define	IFALIASZ	256
+#include <linux/hdlc/ioctl.h>
+
+/* Standard interface flags (netdevice->flags). */
+#define	IFF_UP		0x1		/* interface is up		*/
+#define	IFF_BROADCAST	0x2		/* broadcast address valid	*/
+#define	IFF_DEBUG	0x4		/* turn on debugging		*/
+#define	IFF_LOOPBACK	0x8		/* is a loopback net		*/
+#define	IFF_POINTOPOINT	0x10		/* interface is has p-p link	*/
+#define	IFF_NOTRAILERS	0x20		/* avoid use of trailers	*/
+#define	IFF_RUNNING	0x40		/* interface RFC2863 OPER_UP	*/
+#define	IFF_NOARP	0x80		/* no ARP protocol		*/
+#define	IFF_PROMISC	0x100		/* receive all packets		*/
+#define	IFF_ALLMULTI	0x200		/* receive all multicast packets*/
+
+#define IFF_MASTER	0x400		/* master of a load balancer 	*/
+#define IFF_SLAVE	0x800		/* slave of a load balancer	*/
+
+#define IFF_MULTICAST	0x1000		/* Supports multicast		*/
+
+#define IFF_PORTSEL	0x2000          /* can set media type		*/
+#define IFF_AUTOMEDIA	0x4000		/* auto media select active	*/
+#define IFF_DYNAMIC	0x8000		/* dialup device with changing addresses*/
+
+#define IFF_LOWER_UP	0x10000		/* driver signals L1 up		*/
+#define IFF_DORMANT	0x20000		/* driver signals dormant	*/
+
+#define IFF_ECHO	0x40000		/* echo sent packets		*/
+
+#define IFF_VOLATILE	(IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_ECHO|\
+		IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT)
+
+/* Private (from user) interface flags (netdevice->priv_flags). */
+#define IFF_802_1Q_VLAN 0x1             /* 802.1Q VLAN device.          */
+#define IFF_EBRIDGE	0x2		/* Ethernet bridging device.	*/
+#define IFF_SLAVE_INACTIVE	0x4	/* bonding slave not the curr. active */
+#define IFF_MASTER_8023AD	0x8	/* bonding master, 802.3ad. 	*/
+#define IFF_MASTER_ALB	0x10		/* bonding master, balance-alb.	*/
+#define IFF_BONDING	0x20		/* bonding master or slave	*/
+#define IFF_SLAVE_NEEDARP 0x40		/* need ARPs for validation	*/
+#define IFF_ISATAP	0x80		/* ISATAP interface (RFC4214)	*/
+#define IFF_MASTER_ARPMON 0x100		/* bonding master, ARP mon in use */
+#define IFF_WAN_HDLC	0x200		/* WAN HDLC device		*/
+#define IFF_XMIT_DST_RELEASE 0x400	/* dev_hard_start_xmit() is allowed to
+					 * release skb->dst
+					 */
+#define IFF_DONT_BRIDGE 0x800		/* disallow bridging this ether dev */
+#define IFF_DISABLE_NETPOLL	0x1000	/* disable netpoll at run-time */
+#define IFF_MACVLAN_PORT	0x2000	/* device used as macvlan port */
+#define IFF_BRIDGE_PORT	0x4000		/* device used as bridge port */
+#define IFF_OVS_DATAPATH	0x8000	/* device used as Open vSwitch
+					 * datapath port */
+#define IFF_TX_SKB_SHARING	0x10000	/* The interface supports sharing
+					 * skbs on transmit */
+#define IFF_UNICAST_FLT	0x20000		/* Supports unicast filtering	*/
+#define IFF_TEAM_PORT	0x40000		/* device used as team port */
+#define IFF_SUPP_NOFCS	0x80000		/* device supports sending custom FCS */
+#define IFF_LIVE_ADDR_CHANGE 0x100000	/* device supports hardware address
+					 * change when it's running */
+
+
+#define IF_GET_IFACE	0x0001		/* for querying only */
+#define IF_GET_PROTO	0x0002
+
+/* For definitions see hdlc.h */
+#define IF_IFACE_V35	0x1000		/* V.35 serial interface	*/
+#define IF_IFACE_V24	0x1001		/* V.24 serial interface	*/
+#define IF_IFACE_X21	0x1002		/* X.21 serial interface	*/
+#define IF_IFACE_T1	0x1003		/* T1 telco serial interface	*/
+#define IF_IFACE_E1	0x1004		/* E1 telco serial interface	*/
+#define IF_IFACE_SYNC_SERIAL 0x1005	/* can't be set by software	*/
+#define IF_IFACE_X21D   0x1006          /* X.21 Dual Clocking (FarSite) */
+
+/* For definitions see hdlc.h */
+#define IF_PROTO_HDLC	0x2000		/* raw HDLC protocol		*/
+#define IF_PROTO_PPP	0x2001		/* PPP protocol			*/
+#define IF_PROTO_CISCO	0x2002		/* Cisco HDLC protocol		*/
+#define IF_PROTO_FR	0x2003		/* Frame Relay protocol		*/
+#define IF_PROTO_FR_ADD_PVC 0x2004	/*    Create FR PVC		*/
+#define IF_PROTO_FR_DEL_PVC 0x2005	/*    Delete FR PVC		*/
+#define IF_PROTO_X25	0x2006		/* X.25				*/
+#define IF_PROTO_HDLC_ETH 0x2007	/* raw HDLC, Ethernet emulation	*/
+#define IF_PROTO_FR_ADD_ETH_PVC 0x2008	/*  Create FR Ethernet-bridged PVC */
+#define IF_PROTO_FR_DEL_ETH_PVC 0x2009	/*  Delete FR Ethernet-bridged PVC */
+#define IF_PROTO_FR_PVC	0x200A		/* for reading PVC status	*/
+#define IF_PROTO_FR_ETH_PVC 0x200B
+#define IF_PROTO_RAW    0x200C          /* RAW Socket                   */
+
+/* RFC 2863 operational status */
+enum {
+	IF_OPER_UNKNOWN,
+	IF_OPER_NOTPRESENT,
+	IF_OPER_DOWN,
+	IF_OPER_LOWERLAYERDOWN,
+	IF_OPER_TESTING,
+	IF_OPER_DORMANT,
+	IF_OPER_UP,
+};
+
+/* link modes */
+enum {
+	IF_LINK_MODE_DEFAULT,
+	IF_LINK_MODE_DORMANT,	/* limit upward transition to dormant */
+};
+
+/*
+ *	Device mapping structure. I'd just gone off and designed a 
+ *	beautiful scheme using only loadable modules with arguments
+ *	for driver options and along come the PCMCIA people 8)
+ *
+ *	Ah well. The get() side of this is good for WDSETUP, and it'll
+ *	be handy for debugging things. The set side is fine for now and
+ *	being very small might be worth keeping for clean configuration.
+ */
+
+struct ifmap {
+	unsigned long mem_start;
+	unsigned long mem_end;
+	unsigned short base_addr; 
+	unsigned char irq;
+	unsigned char dma;
+	unsigned char port;
+	/* 3 bytes spare */
+};
+
+struct if_settings {
+	unsigned int type;	/* Type of physical device or protocol */
+	unsigned int size;	/* Size of the data allocated by the caller */
+	union {
+		/* {atm/eth/dsl}_settings anyone ? */
+		raw_hdlc_proto		__user *raw_hdlc;
+		cisco_proto		__user *cisco;
+		fr_proto		__user *fr;
+		fr_proto_pvc		__user *fr_pvc;
+		fr_proto_pvc_info	__user *fr_pvc_info;
+
+		/* interface settings */
+		sync_serial_settings	__user *sync;
+		te1_settings		__user *te1;
+	} ifs_ifsu;
+};
+
+/*
+ * Interface request structure used for socket
+ * ioctl's.  All interface ioctl's must have parameter
+ * definitions which begin with ifr_name.  The
+ * remainder may be interface specific.
+ */
+
+struct ifreq {
+#define IFHWADDRLEN	6
+	union
+	{
+		char	ifrn_name[IFNAMSIZ];		/* if name, e.g. "en0" */
+	} ifr_ifrn;
+	
+	union {
+		struct	sockaddr ifru_addr;
+		struct	sockaddr ifru_dstaddr;
+		struct	sockaddr ifru_broadaddr;
+		struct	sockaddr ifru_netmask;
+		struct  sockaddr ifru_hwaddr;
+		short	ifru_flags;
+		int	ifru_ivalue;
+		int	ifru_mtu;
+		struct  ifmap ifru_map;
+		char	ifru_slave[IFNAMSIZ];	/* Just fits the size */
+		char	ifru_newname[IFNAMSIZ];
+		void __user *	ifru_data;
+		struct	if_settings ifru_settings;
+	} ifr_ifru;
+};
+
+#define ifr_name	ifr_ifrn.ifrn_name	/* interface name 	*/
+#define ifr_hwaddr	ifr_ifru.ifru_hwaddr	/* MAC address 		*/
+#define	ifr_addr	ifr_ifru.ifru_addr	/* address		*/
+#define	ifr_dstaddr	ifr_ifru.ifru_dstaddr	/* other end of p-p lnk	*/
+#define	ifr_broadaddr	ifr_ifru.ifru_broadaddr	/* broadcast address	*/
+#define	ifr_netmask	ifr_ifru.ifru_netmask	/* interface net mask	*/
+#define	ifr_flags	ifr_ifru.ifru_flags	/* flags		*/
+#define	ifr_metric	ifr_ifru.ifru_ivalue	/* metric		*/
+#define	ifr_mtu		ifr_ifru.ifru_mtu	/* mtu			*/
+#define ifr_map		ifr_ifru.ifru_map	/* device map		*/
+#define ifr_slave	ifr_ifru.ifru_slave	/* slave device		*/
+#define	ifr_data	ifr_ifru.ifru_data	/* for use by interface	*/
+#define ifr_ifindex	ifr_ifru.ifru_ivalue	/* interface index	*/
+#define ifr_bandwidth	ifr_ifru.ifru_ivalue    /* link bandwidth	*/
+#define ifr_qlen	ifr_ifru.ifru_ivalue	/* Queue length 	*/
+#define ifr_newname	ifr_ifru.ifru_newname	/* New name		*/
+#define ifr_settings	ifr_ifru.ifru_settings	/* Device/proto settings*/
+
+/*
+ * Structure used in SIOCGIFCONF request.
+ * Used to retrieve interface configuration
+ * for machine (useful for programs which
+ * must know all networks accessible).
+ */
+
+struct ifconf  {
+	int	ifc_len;			/* size of buffer	*/
+	union {
+		char __user *ifcu_buf;
+		struct ifreq __user *ifcu_req;
+	} ifc_ifcu;
+};
+#define	ifc_buf	ifc_ifcu.ifcu_buf		/* buffer address	*/
+#define	ifc_req	ifc_ifcu.ifcu_req		/* array of structures	*/
+
+#endif /* _LINUX_IF_H */
diff --git a/include/uapi/linux/if_addr.h b/include/uapi/linux/if_addr.h
new file mode 100644
index 00000000000..23357ab81a7
--- /dev/null
+++ b/include/uapi/linux/if_addr.h
@@ -0,0 +1,61 @@
+#ifndef __LINUX_IF_ADDR_H
+#define __LINUX_IF_ADDR_H
+
+#include <linux/types.h>
+#include <linux/netlink.h>
+
+struct ifaddrmsg {
+	__u8		ifa_family;
+	__u8		ifa_prefixlen;	/* The prefix length		*/
+	__u8		ifa_flags;	/* Flags			*/
+	__u8		ifa_scope;	/* Address scope		*/
+	__u32		ifa_index;	/* Link index			*/
+};
+
+/*
+ * Important comment:
+ * IFA_ADDRESS is prefix address, rather than local interface address.
+ * It makes no difference for normally configured broadcast interfaces,
+ * but for point-to-point IFA_ADDRESS is DESTINATION address,
+ * local address is supplied in IFA_LOCAL attribute.
+ */
+enum {
+	IFA_UNSPEC,
+	IFA_ADDRESS,
+	IFA_LOCAL,
+	IFA_LABEL,
+	IFA_BROADCAST,
+	IFA_ANYCAST,
+	IFA_CACHEINFO,
+	IFA_MULTICAST,
+	__IFA_MAX,
+};
+
+#define IFA_MAX (__IFA_MAX - 1)
+
+/* ifa_flags */
+#define IFA_F_SECONDARY		0x01
+#define IFA_F_TEMPORARY		IFA_F_SECONDARY
+
+#define	IFA_F_NODAD		0x02
+#define IFA_F_OPTIMISTIC	0x04
+#define IFA_F_DADFAILED		0x08
+#define	IFA_F_HOMEADDRESS	0x10
+#define IFA_F_DEPRECATED	0x20
+#define IFA_F_TENTATIVE		0x40
+#define IFA_F_PERMANENT		0x80
+
+struct ifa_cacheinfo {
+	__u32	ifa_prefered;
+	__u32	ifa_valid;
+	__u32	cstamp; /* created timestamp, hundredths of seconds */
+	__u32	tstamp; /* updated timestamp, hundredths of seconds */
+};
+
+/* backwards compatibility for userspace */
+#ifndef __KERNEL__
+#define IFA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifaddrmsg))))
+#define IFA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifaddrmsg))
+#endif
+
+#endif
diff --git a/include/uapi/linux/if_addrlabel.h b/include/uapi/linux/if_addrlabel.h
new file mode 100644
index 00000000000..54580c29818
--- /dev/null
+++ b/include/uapi/linux/if_addrlabel.h
@@ -0,0 +1,32 @@
+/*
+ * if_addrlabel.h - netlink interface for address labels
+ *
+ * Copyright (C)2007 USAGI/WIDE Project,  All Rights Reserved.
+ *
+ * Authors:
+ *	YOSHIFUJI Hideaki @ USAGI/WIDE <yoshfuji@linux-ipv6.org>
+ */
+
+#ifndef __LINUX_IF_ADDRLABEL_H
+#define __LINUX_IF_ADDRLABEL_H
+
+#include <linux/types.h>
+
+struct ifaddrlblmsg {
+	__u8		ifal_family;		/* Address family */
+	__u8		__ifal_reserved;	/* Reserved */
+	__u8		ifal_prefixlen;		/* Prefix length */
+	__u8		ifal_flags;		/* Flags */
+	__u32		ifal_index;		/* Link index */
+	__u32		ifal_seq;		/* sequence number */
+};
+
+enum {
+	IFAL_ADDRESS = 1,
+	IFAL_LABEL = 2,
+	__IFAL_MAX
+};
+
+#define IFAL_MAX	(__IFAL_MAX - 1)
+
+#endif
diff --git a/include/uapi/linux/if_alg.h b/include/uapi/linux/if_alg.h
new file mode 100644
index 00000000000..0f9acce5b1f
--- /dev/null
+++ b/include/uapi/linux/if_alg.h
@@ -0,0 +1,40 @@
+/*
+ * if_alg: User-space algorithm interface
+ *
+ * Copyright (c) 2010 Herbert Xu <herbert@gondor.apana.org.au>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ */
+
+#ifndef _LINUX_IF_ALG_H
+#define _LINUX_IF_ALG_H
+
+#include <linux/types.h>
+
+struct sockaddr_alg {
+	__u16	salg_family;
+	__u8	salg_type[14];
+	__u32	salg_feat;
+	__u32	salg_mask;
+	__u8	salg_name[64];
+};
+
+struct af_alg_iv {
+	__u32	ivlen;
+	__u8	iv[0];
+};
+
+/* Socket options */
+#define ALG_SET_KEY			1
+#define ALG_SET_IV			2
+#define ALG_SET_OP			3
+
+/* Operations */
+#define ALG_OP_DECRYPT			0
+#define ALG_OP_ENCRYPT			1
+
+#endif	/* _LINUX_IF_ALG_H */
diff --git a/include/uapi/linux/if_arcnet.h b/include/uapi/linux/if_arcnet.h
new file mode 100644
index 00000000000..46e34bd0e78
--- /dev/null
+++ b/include/uapi/linux/if_arcnet.h
@@ -0,0 +1,132 @@
+/*
+ * INET         An implementation of the TCP/IP protocol suite for the LINUX
+ *              operating system.  INET is implemented using the  BSD Socket
+ *              interface as the means of communication with the user level.
+ *
+ *              Global definitions for the ARCnet interface.
+ *
+ * Authors:     David Woodhouse and Avery Pennarun
+ *
+ *              This program is free software; you can redistribute it and/or
+ *              modify it under the terms of the GNU General Public License
+ *              as published by the Free Software Foundation; either version
+ *              2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_IF_ARCNET_H
+#define _LINUX_IF_ARCNET_H
+
+#include <linux/types.h>
+#include <linux/if_ether.h>
+
+
+/*
+ *    These are the defined ARCnet Protocol ID's.
+ */
+
+/* CAP mode */
+/* No macro but uses 1-8 */
+
+/* RFC1201 Protocol ID's */
+#define ARC_P_IP		212	/* 0xD4 */
+#define ARC_P_IPV6		196	/* 0xC4: RFC2497 */
+#define ARC_P_ARP		213	/* 0xD5 */
+#define ARC_P_RARP		214	/* 0xD6 */
+#define ARC_P_IPX		250	/* 0xFA */
+#define ARC_P_NOVELL_EC		236	/* 0xEC */
+
+/* Old RFC1051 Protocol ID's */
+#define ARC_P_IP_RFC1051	240	/* 0xF0 */
+#define ARC_P_ARP_RFC1051	241	/* 0xF1 */
+
+/* MS LanMan/WfWg "NDIS" encapsulation */
+#define ARC_P_ETHER		232	/* 0xE8 */
+
+/* Unsupported/indirectly supported protocols */
+#define ARC_P_DATAPOINT_BOOT	0	/* very old Datapoint equipment */
+#define ARC_P_DATAPOINT_MOUNT	1
+#define ARC_P_POWERLAN_BEACON	8	/* Probably ATA-Netbios related */
+#define ARC_P_POWERLAN_BEACON2	243	/* 0xF3 */
+#define ARC_P_LANSOFT		251	/* 0xFB - what is this? */
+#define ARC_P_ATALK		0xDD
+
+/* Hardware address length */
+#define ARCNET_ALEN	1
+
+/*
+ * The RFC1201-specific components of an arcnet packet header.
+ */
+struct arc_rfc1201 {
+    __u8  proto;		/* protocol ID field - varies		*/
+    __u8  split_flag;	/* for use with split packets		*/
+    __be16   sequence;		/* sequence number			*/
+    __u8  payload[0];	/* space remaining in packet (504 bytes)*/
+};
+#define RFC1201_HDR_SIZE 4
+
+
+/*
+ * The RFC1051-specific components.
+ */
+struct arc_rfc1051 {
+    __u8 proto;		/* ARC_P_RFC1051_ARP/RFC1051_IP	*/
+    __u8 payload[0];		/* 507 bytes			*/
+};
+#define RFC1051_HDR_SIZE 1
+
+
+/*
+ * The ethernet-encap-specific components.  We have a real ethernet header
+ * and some data.
+ */
+struct arc_eth_encap {
+    __u8 proto;		/* Always ARC_P_ETHER			*/
+    struct ethhdr eth;		/* standard ethernet header (yuck!)	*/
+    __u8 payload[0];		/* 493 bytes				*/
+};
+#define ETH_ENCAP_HDR_SIZE 14
+
+
+struct arc_cap {
+	__u8 proto;
+	__u8 cookie[sizeof(int)];   /* Actually NOT sent over the network */
+	union {
+		__u8 ack;
+		__u8 raw[0];		/* 507 bytes */
+	} mes;
+};
+
+/*
+ * The data needed by the actual arcnet hardware.
+ *
+ * Now, in the real arcnet hardware, the third and fourth bytes are the
+ * 'offset' specification instead of the length, and the soft data is at
+ * the _end_ of the 512-byte buffer.  We hide this complexity inside the
+ * driver.
+ */
+struct arc_hardware {
+    __u8  source,		/* source ARCnet - filled in automagically */
+             dest,		/* destination ARCnet - 0 for broadcast    */
+    	     offset[2];		/* offset bytes (some weird semantics)     */
+};
+#define ARC_HDR_SIZE 4
+
+/*
+ * This is an ARCnet frame header, as seen by the kernel (and userspace,
+ * when you do a raw packet capture).
+ */
+struct archdr {
+    /* hardware requirements */
+    struct arc_hardware hard;
+     
+    /* arcnet encapsulation-specific bits */
+    union {
+	struct arc_rfc1201   rfc1201;
+	struct arc_rfc1051   rfc1051;
+	struct arc_eth_encap eth_encap;
+	struct arc_cap       cap;
+	__u8 raw[0];		/* 508 bytes				*/
+    } soft;
+};
+
+#endif				/* _LINUX_IF_ARCNET_H */
diff --git a/include/uapi/linux/if_arp.h b/include/uapi/linux/if_arp.h
new file mode 100644
index 00000000000..82c7d1bdade
--- /dev/null
+++ b/include/uapi/linux/if_arp.h
@@ -0,0 +1,159 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for the ARP (RFC 826) protocol.
+ *
+ * Version:	@(#)if_arp.h	1.0.1	04/16/93
+ *
+ * Authors:	Original taken from Berkeley UNIX 4.3, (c) UCB 1986-1988
+ *		Portions taken from the KA9Q/NOS (v2.00m PA0GRI) source.
+ *		Ross Biro
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *		Florian La Roche,
+ *		Jonathan Layes <layes@loran.com>
+ *		Arnaldo Carvalho de Melo <acme@conectiva.com.br> ARPHRD_HWX25
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_LINUX_IF_ARP_H
+#define _UAPI_LINUX_IF_ARP_H
+
+#include <linux/netdevice.h>
+
+/* ARP protocol HARDWARE identifiers. */
+#define ARPHRD_NETROM	0		/* from KA9Q: NET/ROM pseudo	*/
+#define ARPHRD_ETHER 	1		/* Ethernet 10Mbps		*/
+#define	ARPHRD_EETHER	2		/* Experimental Ethernet	*/
+#define	ARPHRD_AX25	3		/* AX.25 Level 2		*/
+#define	ARPHRD_PRONET	4		/* PROnet token ring		*/
+#define	ARPHRD_CHAOS	5		/* Chaosnet			*/
+#define	ARPHRD_IEEE802	6		/* IEEE 802.2 Ethernet/TR/TB	*/
+#define	ARPHRD_ARCNET	7		/* ARCnet			*/
+#define	ARPHRD_APPLETLK	8		/* APPLEtalk			*/
+#define ARPHRD_DLCI	15		/* Frame Relay DLCI		*/
+#define ARPHRD_ATM	19		/* ATM 				*/
+#define ARPHRD_METRICOM	23		/* Metricom STRIP (new IANA id)	*/
+#define	ARPHRD_IEEE1394	24		/* IEEE 1394 IPv4 - RFC 2734	*/
+#define ARPHRD_EUI64	27		/* EUI-64                       */
+#define ARPHRD_INFINIBAND 32		/* InfiniBand			*/
+
+/* Dummy types for non ARP hardware */
+#define ARPHRD_SLIP	256
+#define ARPHRD_CSLIP	257
+#define ARPHRD_SLIP6	258
+#define ARPHRD_CSLIP6	259
+#define ARPHRD_RSRVD	260		/* Notional KISS type 		*/
+#define ARPHRD_ADAPT	264
+#define ARPHRD_ROSE	270
+#define ARPHRD_X25	271		/* CCITT X.25			*/
+#define ARPHRD_HWX25	272		/* Boards with X.25 in firmware	*/
+#define ARPHRD_CAN	280		/* Controller Area Network      */
+#define ARPHRD_PPP	512
+#define ARPHRD_CISCO	513		/* Cisco HDLC	 		*/
+#define ARPHRD_HDLC	ARPHRD_CISCO
+#define ARPHRD_LAPB	516		/* LAPB				*/
+#define ARPHRD_DDCMP    517		/* Digital's DDCMP protocol     */
+#define ARPHRD_RAWHDLC	518		/* Raw HDLC			*/
+
+#define ARPHRD_TUNNEL	768		/* IPIP tunnel			*/
+#define ARPHRD_TUNNEL6	769		/* IP6IP6 tunnel       		*/
+#define ARPHRD_FRAD	770             /* Frame Relay Access Device    */
+#define ARPHRD_SKIP	771		/* SKIP vif			*/
+#define ARPHRD_LOOPBACK	772		/* Loopback device		*/
+#define ARPHRD_LOCALTLK 773		/* Localtalk device		*/
+#define ARPHRD_FDDI	774		/* Fiber Distributed Data Interface */
+#define ARPHRD_BIF      775             /* AP1000 BIF                   */
+#define ARPHRD_SIT	776		/* sit0 device - IPv6-in-IPv4	*/
+#define ARPHRD_IPDDP	777		/* IP over DDP tunneller	*/
+#define ARPHRD_IPGRE	778		/* GRE over IP			*/
+#define ARPHRD_PIMREG	779		/* PIMSM register interface	*/
+#define ARPHRD_HIPPI	780		/* High Performance Parallel Interface */
+#define ARPHRD_ASH	781		/* Nexus 64Mbps Ash		*/
+#define ARPHRD_ECONET	782		/* Acorn Econet			*/
+#define ARPHRD_IRDA 	783		/* Linux-IrDA			*/
+/* ARP works differently on different FC media .. so  */
+#define ARPHRD_FCPP	784		/* Point to point fibrechannel	*/
+#define ARPHRD_FCAL	785		/* Fibrechannel arbitrated loop */
+#define ARPHRD_FCPL	786		/* Fibrechannel public loop	*/
+#define ARPHRD_FCFABRIC	787		/* Fibrechannel fabric		*/
+	/* 787->799 reserved for fibrechannel media types */
+#define ARPHRD_IEEE802_TR 800		/* Magic type ident for TR	*/
+#define ARPHRD_IEEE80211 801		/* IEEE 802.11			*/
+#define ARPHRD_IEEE80211_PRISM 802	/* IEEE 802.11 + Prism2 header  */
+#define ARPHRD_IEEE80211_RADIOTAP 803	/* IEEE 802.11 + radiotap header */
+#define ARPHRD_IEEE802154	  804
+#define ARPHRD_IEEE802154_MONITOR 805	/* IEEE 802.15.4 network monitor */
+
+#define ARPHRD_PHONET	820		/* PhoNet media type		*/
+#define ARPHRD_PHONET_PIPE 821		/* PhoNet pipe header		*/
+#define ARPHRD_CAIF	822		/* CAIF media type		*/
+#define ARPHRD_IP6GRE	823		/* GRE over IPv6		*/
+
+#define ARPHRD_VOID	  0xFFFF	/* Void type, nothing is known */
+#define ARPHRD_NONE	  0xFFFE	/* zero header length */
+
+/* ARP protocol opcodes. */
+#define	ARPOP_REQUEST	1		/* ARP request			*/
+#define	ARPOP_REPLY	2		/* ARP reply			*/
+#define	ARPOP_RREQUEST	3		/* RARP request			*/
+#define	ARPOP_RREPLY	4		/* RARP reply			*/
+#define	ARPOP_InREQUEST	8		/* InARP request		*/
+#define	ARPOP_InREPLY	9		/* InARP reply			*/
+#define	ARPOP_NAK	10		/* (ATM)ARP NAK			*/
+
+
+/* ARP ioctl request. */
+struct arpreq {
+  struct sockaddr	arp_pa;		/* protocol address		*/
+  struct sockaddr	arp_ha;		/* hardware address		*/
+  int			arp_flags;	/* flags			*/
+  struct sockaddr       arp_netmask;    /* netmask (only for proxy arps) */
+  char			arp_dev[16];
+};
+
+struct arpreq_old {
+  struct sockaddr	arp_pa;		/* protocol address		*/
+  struct sockaddr	arp_ha;		/* hardware address		*/
+  int			arp_flags;	/* flags			*/
+  struct sockaddr       arp_netmask;    /* netmask (only for proxy arps) */
+};
+
+/* ARP Flag values. */
+#define ATF_COM		0x02		/* completed entry (ha valid)	*/
+#define	ATF_PERM	0x04		/* permanent entry		*/
+#define	ATF_PUBL	0x08		/* publish entry		*/
+#define	ATF_USETRAILERS	0x10		/* has requested trailers	*/
+#define ATF_NETMASK     0x20            /* want to use a netmask (only
+					   for proxy entries) */
+#define ATF_DONTPUB	0x40		/* don't answer this addresses	*/
+
+/*
+ *	This structure defines an ethernet arp header.
+ */
+
+struct arphdr {
+	__be16		ar_hrd;		/* format of hardware address	*/
+	__be16		ar_pro;		/* format of protocol address	*/
+	unsigned char	ar_hln;		/* length of hardware address	*/
+	unsigned char	ar_pln;		/* length of protocol address	*/
+	__be16		ar_op;		/* ARP opcode (command)		*/
+
+#if 0
+	 /*
+	  *	 Ethernet looks like this : This bit is variable sized however...
+	  */
+	unsigned char		ar_sha[ETH_ALEN];	/* sender hardware address	*/
+	unsigned char		ar_sip[4];		/* sender IP address		*/
+	unsigned char		ar_tha[ETH_ALEN];	/* target hardware address	*/
+	unsigned char		ar_tip[4];		/* target IP address		*/
+#endif
+
+};
+
+
+#endif /* _UAPI_LINUX_IF_ARP_H */
diff --git a/include/uapi/linux/if_bonding.h b/include/uapi/linux/if_bonding.h
new file mode 100644
index 00000000000..a17edda8a78
--- /dev/null
+++ b/include/uapi/linux/if_bonding.h
@@ -0,0 +1,128 @@
+/*
+ * Bond several ethernet interfaces into a Cisco, running 'Etherchannel'.
+ *
+ *
+ * Portions are (c) Copyright 1995 Simon "Guru Aleph-Null" Janes
+ * NCM: Network and Communications Management, Inc.
+ *
+ * BUT, I'm the one who modified it for ethernet, so:
+ * (c) Copyright 1999, Thomas Davis, tadavis@lbl.gov
+ *
+ *	This software may be used and distributed according to the terms
+ *	of the GNU Public License, incorporated herein by reference.
+ *
+ * 2003/03/18 - Amir Noam <amir.noam at intel dot com>
+ *	- Added support for getting slave's speed and duplex via ethtool.
+ *	  Needed for 802.3ad and other future modes.
+ *
+ * 2003/03/18 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and
+ *		Shmulik Hen <shmulik.hen at intel dot com>
+ *	- Enable support of modes that need to use the unique mac address of
+ *	  each slave.
+ *
+ * 2003/03/18 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and
+ *		Amir Noam <amir.noam at intel dot com>
+ *	- Moved driver's private data types to bonding.h
+ *
+ * 2003/03/18 - Amir Noam <amir.noam at intel dot com>,
+ *		Tsippy Mendelson <tsippy.mendelson at intel dot com> and
+ *		Shmulik Hen <shmulik.hen at intel dot com>
+ *	- Added support for IEEE 802.3ad Dynamic link aggregation mode.
+ *
+ * 2003/05/01 - Amir Noam <amir.noam at intel dot com>
+ *	- Added ABI version control to restore compatibility between
+ *	  new/old ifenslave and new/old bonding.
+ *
+ * 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com>
+ *	- Code cleanup and style changes
+ *
+ * 2005/05/05 - Jason Gabler <jygabler at lbl dot gov>
+ *      - added definitions for various XOR hashing policies
+ */
+
+#ifndef _LINUX_IF_BONDING_H
+#define _LINUX_IF_BONDING_H
+
+#include <linux/if.h>
+#include <linux/types.h>
+#include <linux/if_ether.h>
+
+/* userland - kernel ABI version (2003/05/08) */
+#define BOND_ABI_VERSION 2
+
+/*
+ * We can remove these ioctl definitions in 2.5.  People should use the
+ * SIOC*** versions of them instead
+ */
+#define BOND_ENSLAVE_OLD		(SIOCDEVPRIVATE)
+#define BOND_RELEASE_OLD		(SIOCDEVPRIVATE + 1)
+#define BOND_SETHWADDR_OLD		(SIOCDEVPRIVATE + 2)
+#define BOND_SLAVE_INFO_QUERY_OLD	(SIOCDEVPRIVATE + 11)
+#define BOND_INFO_QUERY_OLD		(SIOCDEVPRIVATE + 12)
+#define BOND_CHANGE_ACTIVE_OLD		(SIOCDEVPRIVATE + 13)
+
+#define BOND_CHECK_MII_STATUS	(SIOCGMIIPHY)
+
+#define BOND_MODE_ROUNDROBIN	0
+#define BOND_MODE_ACTIVEBACKUP	1
+#define BOND_MODE_XOR		2
+#define BOND_MODE_BROADCAST	3
+#define BOND_MODE_8023AD        4
+#define BOND_MODE_TLB           5
+#define BOND_MODE_ALB		6 /* TLB + RLB (receive load balancing) */
+
+/* each slave's link has 4 states */
+#define BOND_LINK_UP    0           /* link is up and running */
+#define BOND_LINK_FAIL  1           /* link has just gone down */
+#define BOND_LINK_DOWN  2           /* link has been down for too long time */
+#define BOND_LINK_BACK  3           /* link is going back */
+
+/* each slave has several states */
+#define BOND_STATE_ACTIVE       0   /* link is active */
+#define BOND_STATE_BACKUP       1   /* link is backup */
+
+#define BOND_DEFAULT_MAX_BONDS  1   /* Default maximum number of devices to support */
+
+#define BOND_DEFAULT_TX_QUEUES 16   /* Default number of tx queues per device */
+
+#define BOND_DEFAULT_RESEND_IGMP	1 /* Default number of IGMP membership reports */
+
+/* hashing types */
+#define BOND_XMIT_POLICY_LAYER2		0 /* layer 2 (MAC only), default */
+#define BOND_XMIT_POLICY_LAYER34	1 /* layer 3+4 (IP ^ (TCP || UDP)) */
+#define BOND_XMIT_POLICY_LAYER23	2 /* layer 2+3 (IP ^ MAC) */
+
+typedef struct ifbond {
+	__s32 bond_mode;
+	__s32 num_slaves;
+	__s32 miimon;
+} ifbond;
+
+typedef struct ifslave {
+	__s32 slave_id; /* Used as an IN param to the BOND_SLAVE_INFO_QUERY ioctl */
+	char slave_name[IFNAMSIZ];
+	__s8 link;
+	__s8 state;
+	__u32  link_failure_count;
+} ifslave;
+
+struct ad_info {
+	__u16 aggregator_id;
+	__u16 ports;
+	__u16 actor_key;
+	__u16 partner_key;
+	__u8 partner_system[ETH_ALEN];
+};
+
+#endif /* _LINUX_IF_BONDING_H */
+
+/*
+ * Local variables:
+ *  version-control: t
+ *  kept-new-versions: 5
+ *  c-indent-level: 8
+ *  c-basic-offset: 8
+ *  tab-width: 8
+ * End:
+ */
+
diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h
new file mode 100644
index 00000000000..a8fe9549ddb
--- /dev/null
+++ b/include/uapi/linux/if_bridge.h
@@ -0,0 +1,101 @@
+/*
+ *	Linux ethernet bridge
+ *
+ *	Authors:
+ *	Lennert Buytenhek		<buytenh@gnu.org>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _UAPI_LINUX_IF_BRIDGE_H
+#define _UAPI_LINUX_IF_BRIDGE_H
+
+#include <linux/types.h>
+
+#define SYSFS_BRIDGE_ATTR	"bridge"
+#define SYSFS_BRIDGE_FDB	"brforward"
+#define SYSFS_BRIDGE_PORT_SUBDIR "brif"
+#define SYSFS_BRIDGE_PORT_ATTR	"brport"
+#define SYSFS_BRIDGE_PORT_LINK	"bridge"
+
+#define BRCTL_VERSION 1
+
+#define BRCTL_GET_VERSION 0
+#define BRCTL_GET_BRIDGES 1
+#define BRCTL_ADD_BRIDGE 2
+#define BRCTL_DEL_BRIDGE 3
+#define BRCTL_ADD_IF 4
+#define BRCTL_DEL_IF 5
+#define BRCTL_GET_BRIDGE_INFO 6
+#define BRCTL_GET_PORT_LIST 7
+#define BRCTL_SET_BRIDGE_FORWARD_DELAY 8
+#define BRCTL_SET_BRIDGE_HELLO_TIME 9
+#define BRCTL_SET_BRIDGE_MAX_AGE 10
+#define BRCTL_SET_AGEING_TIME 11
+#define BRCTL_SET_GC_INTERVAL 12
+#define BRCTL_GET_PORT_INFO 13
+#define BRCTL_SET_BRIDGE_STP_STATE 14
+#define BRCTL_SET_BRIDGE_PRIORITY 15
+#define BRCTL_SET_PORT_PRIORITY 16
+#define BRCTL_SET_PATH_COST 17
+#define BRCTL_GET_FDB_ENTRIES 18
+
+#define BR_STATE_DISABLED 0
+#define BR_STATE_LISTENING 1
+#define BR_STATE_LEARNING 2
+#define BR_STATE_FORWARDING 3
+#define BR_STATE_BLOCKING 4
+
+struct __bridge_info {
+	__u64 designated_root;
+	__u64 bridge_id;
+	__u32 root_path_cost;
+	__u32 max_age;
+	__u32 hello_time;
+	__u32 forward_delay;
+	__u32 bridge_max_age;
+	__u32 bridge_hello_time;
+	__u32 bridge_forward_delay;
+	__u8 topology_change;
+	__u8 topology_change_detected;
+	__u8 root_port;
+	__u8 stp_enabled;
+	__u32 ageing_time;
+	__u32 gc_interval;
+	__u32 hello_timer_value;
+	__u32 tcn_timer_value;
+	__u32 topology_change_timer_value;
+	__u32 gc_timer_value;
+};
+
+struct __port_info {
+	__u64 designated_root;
+	__u64 designated_bridge;
+	__u16 port_id;
+	__u16 designated_port;
+	__u32 path_cost;
+	__u32 designated_cost;
+	__u8 state;
+	__u8 top_change_ack;
+	__u8 config_pending;
+	__u8 unused0;
+	__u32 message_age_timer_value;
+	__u32 forward_delay_timer_value;
+	__u32 hold_timer_value;
+};
+
+struct __fdb_entry {
+	__u8 mac_addr[6];
+	__u8 port_no;
+	__u8 is_local;
+	__u32 ageing_timer_value;
+	__u8 port_hi;
+	__u8 pad0;
+	__u16 unused;
+};
+
+
+#endif /* _UAPI_LINUX_IF_BRIDGE_H */
diff --git a/include/uapi/linux/if_cablemodem.h b/include/uapi/linux/if_cablemodem.h
new file mode 100644
index 00000000000..9ca1007edd9
--- /dev/null
+++ b/include/uapi/linux/if_cablemodem.h
@@ -0,0 +1,22 @@
+#ifndef _LINUX_CABLEMODEM_H_
+#define _LINUX_CABLEMODEM_H_
+/*
+ *		Author: Franco Venturi <fventuri@mediaone.net>
+ *		Copyright 1998 Franco Venturi
+ *
+ *		This program is free software; you can redistribute it
+ *		and/or  modify it under  the terms of  the GNU General
+ *		Public  License as  published  by  the  Free  Software
+ *		Foundation;  either  version 2 of the License, or  (at
+ *		your option) any later version.
+ */
+
+/* some useful defines for sb1000.c e cmconfig.c - fv */
+#define SIOCGCMSTATS		SIOCDEVPRIVATE+0	/* get cable modem stats */
+#define SIOCGCMFIRMWARE		SIOCDEVPRIVATE+1	/* get cm firmware version */
+#define SIOCGCMFREQUENCY	SIOCDEVPRIVATE+2	/* get cable modem frequency */
+#define SIOCSCMFREQUENCY	SIOCDEVPRIVATE+3	/* set cable modem frequency */
+#define SIOCGCMPIDS			SIOCDEVPRIVATE+4	/* get cable modem PIDs */
+#define SIOCSCMPIDS			SIOCDEVPRIVATE+5	/* set cable modem PIDs */
+
+#endif
diff --git a/include/uapi/linux/if_eql.h b/include/uapi/linux/if_eql.h
new file mode 100644
index 00000000000..06e818c9e7c
--- /dev/null
+++ b/include/uapi/linux/if_eql.h
@@ -0,0 +1,54 @@
+/*
+ * Equalizer Load-balancer for serial network interfaces.
+ *
+ * (c) Copyright 1995 Simon "Guru Aleph-Null" Janes
+ * NCM: Network and Communications Management, Inc.
+ *
+ *
+ *	This software may be used and distributed according to the terms
+ *	of the GNU General Public License, incorporated herein by reference.
+ * 
+ * The author may be reached as simon@ncm.com, or C/O
+ *    NCM
+ *    Attn: Simon Janes
+ *    6803 Whittier Ave
+ *    McLean VA 22101
+ *    Phone: 1-703-847-0040 ext 103
+ */
+
+#ifndef _UAPI_LINUX_IF_EQL_H
+#define _UAPI_LINUX_IF_EQL_H
+
+#define EQL_DEFAULT_SLAVE_PRIORITY 28800
+#define EQL_DEFAULT_MAX_SLAVES     4
+#define EQL_DEFAULT_MTU            576
+#define EQL_DEFAULT_RESCHED_IVAL   HZ
+
+#define EQL_ENSLAVE     (SIOCDEVPRIVATE)
+#define EQL_EMANCIPATE  (SIOCDEVPRIVATE + 1)
+
+#define EQL_GETSLAVECFG (SIOCDEVPRIVATE + 2)
+#define EQL_SETSLAVECFG (SIOCDEVPRIVATE + 3)
+
+#define EQL_GETMASTRCFG (SIOCDEVPRIVATE + 4)
+#define EQL_SETMASTRCFG (SIOCDEVPRIVATE + 5)
+
+
+typedef struct master_config {
+	char	master_name[16];
+	int	max_slaves;
+	int	min_slaves;
+} master_config_t;
+
+typedef struct slave_config {
+	char	slave_name[16];
+	long	priority;
+} slave_config_t;
+
+typedef struct slaving_request {
+	char	slave_name[16];
+	long	priority;
+} slaving_request_t;
+
+
+#endif /* _UAPI_LINUX_IF_EQL_H */
diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h
new file mode 100644
index 00000000000..0343e1f0582
--- /dev/null
+++ b/include/uapi/linux/if_ether.h
@@ -0,0 +1,135 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for the Ethernet IEEE 802.3 interface.
+ *
+ * Version:	@(#)if_ether.h	1.0.1a	02/08/94
+ *
+ * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *		Donald Becker, <becker@super.org>
+ *		Alan Cox, <alan@lxorguk.ukuu.org.uk>
+ *		Steve Whitehouse, <gw7rrm@eeshack3.swan.ac.uk>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _UAPI_LINUX_IF_ETHER_H
+#define _UAPI_LINUX_IF_ETHER_H
+
+#include <linux/types.h>
+
+/*
+ *	IEEE 802.3 Ethernet magic constants.  The frame sizes omit the preamble
+ *	and FCS/CRC (frame check sequence).
+ */
+
+#define ETH_ALEN	6		/* Octets in one ethernet addr	 */
+#define ETH_HLEN	14		/* Total octets in header.	 */
+#define ETH_ZLEN	60		/* Min. octets in frame sans FCS */
+#define ETH_DATA_LEN	1500		/* Max. octets in payload	 */
+#define ETH_FRAME_LEN	1514		/* Max. octets in frame sans FCS */
+#define ETH_FCS_LEN	4		/* Octets in the FCS		 */
+
+/*
+ *	These are the defined Ethernet Protocol ID's.
+ */
+
+#define ETH_P_LOOP	0x0060		/* Ethernet Loopback packet	*/
+#define ETH_P_PUP	0x0200		/* Xerox PUP packet		*/
+#define ETH_P_PUPAT	0x0201		/* Xerox PUP Addr Trans packet	*/
+#define ETH_P_IP	0x0800		/* Internet Protocol packet	*/
+#define ETH_P_X25	0x0805		/* CCITT X.25			*/
+#define ETH_P_ARP	0x0806		/* Address Resolution packet	*/
+#define	ETH_P_BPQ	0x08FF		/* G8BPQ AX.25 Ethernet Packet	[ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_IEEEPUP	0x0a00		/* Xerox IEEE802.3 PUP packet */
+#define ETH_P_IEEEPUPAT	0x0a01		/* Xerox IEEE802.3 PUP Addr Trans packet */
+#define ETH_P_DEC       0x6000          /* DEC Assigned proto           */
+#define ETH_P_DNA_DL    0x6001          /* DEC DNA Dump/Load            */
+#define ETH_P_DNA_RC    0x6002          /* DEC DNA Remote Console       */
+#define ETH_P_DNA_RT    0x6003          /* DEC DNA Routing              */
+#define ETH_P_LAT       0x6004          /* DEC LAT                      */
+#define ETH_P_DIAG      0x6005          /* DEC Diagnostics              */
+#define ETH_P_CUST      0x6006          /* DEC Customer use             */
+#define ETH_P_SCA       0x6007          /* DEC Systems Comms Arch       */
+#define ETH_P_TEB	0x6558		/* Trans Ether Bridging		*/
+#define ETH_P_RARP      0x8035		/* Reverse Addr Res packet	*/
+#define ETH_P_ATALK	0x809B		/* Appletalk DDP		*/
+#define ETH_P_AARP	0x80F3		/* Appletalk AARP		*/
+#define ETH_P_8021Q	0x8100          /* 802.1Q VLAN Extended Header  */
+#define ETH_P_IPX	0x8137		/* IPX over DIX			*/
+#define ETH_P_IPV6	0x86DD		/* IPv6 over bluebook		*/
+#define ETH_P_PAUSE	0x8808		/* IEEE Pause frames. See 802.3 31B */
+#define ETH_P_SLOW	0x8809		/* Slow Protocol. See 802.3ad 43B */
+#define ETH_P_WCCP	0x883E		/* Web-cache coordination protocol
+					 * defined in draft-wilson-wrec-wccp-v2-00.txt */
+#define ETH_P_PPP_DISC	0x8863		/* PPPoE discovery messages     */
+#define ETH_P_PPP_SES	0x8864		/* PPPoE session messages	*/
+#define ETH_P_MPLS_UC	0x8847		/* MPLS Unicast traffic		*/
+#define ETH_P_MPLS_MC	0x8848		/* MPLS Multicast traffic	*/
+#define ETH_P_ATMMPOA	0x884c		/* MultiProtocol Over ATM	*/
+#define ETH_P_LINK_CTL	0x886c		/* HPNA, wlan link local tunnel */
+#define ETH_P_ATMFATE	0x8884		/* Frame-based ATM Transport
+					 * over Ethernet
+					 */
+#define ETH_P_PAE	0x888E		/* Port Access Entity (IEEE 802.1X) */
+#define ETH_P_AOE	0x88A2		/* ATA over Ethernet		*/
+#define ETH_P_8021AD	0x88A8          /* 802.1ad Service VLAN		*/
+#define ETH_P_802_EX1	0x88B5		/* 802.1 Local Experimental 1.  */
+#define ETH_P_TIPC	0x88CA		/* TIPC 			*/
+#define ETH_P_8021AH	0x88E7          /* 802.1ah Backbone Service Tag */
+#define ETH_P_1588	0x88F7		/* IEEE 1588 Timesync */
+#define ETH_P_FCOE	0x8906		/* Fibre Channel over Ethernet  */
+#define ETH_P_TDLS	0x890D          /* TDLS */
+#define ETH_P_FIP	0x8914		/* FCoE Initialization Protocol */
+#define ETH_P_QINQ1	0x9100		/* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_QINQ2	0x9200		/* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_QINQ3	0x9300		/* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_EDSA	0xDADA		/* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_AF_IUCV   0xFBFB		/* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */
+
+/*
+ *	Non DIX types. Won't clash for 1500 types.
+ */
+
+#define ETH_P_802_3	0x0001		/* Dummy type for 802.3 frames  */
+#define ETH_P_AX25	0x0002		/* Dummy protocol id for AX.25  */
+#define ETH_P_ALL	0x0003		/* Every packet (be careful!!!) */
+#define ETH_P_802_2	0x0004		/* 802.2 frames 		*/
+#define ETH_P_SNAP	0x0005		/* Internal only		*/
+#define ETH_P_DDCMP     0x0006          /* DEC DDCMP: Internal only     */
+#define ETH_P_WAN_PPP   0x0007          /* Dummy type for WAN PPP frames*/
+#define ETH_P_PPP_MP    0x0008          /* Dummy type for PPP MP frames */
+#define ETH_P_LOCALTALK 0x0009		/* Localtalk pseudo type 	*/
+#define ETH_P_CAN	0x000C		/* CAN: Controller Area Network */
+#define ETH_P_CANFD	0x000D		/* CANFD: CAN flexible data rate*/
+#define ETH_P_PPPTALK	0x0010		/* Dummy type for Atalk over PPP*/
+#define ETH_P_TR_802_2	0x0011		/* 802.2 frames 		*/
+#define ETH_P_MOBITEX	0x0015		/* Mobitex (kaz@cafe.net)	*/
+#define ETH_P_CONTROL	0x0016		/* Card specific control frames */
+#define ETH_P_IRDA	0x0017		/* Linux-IrDA			*/
+#define ETH_P_ECONET	0x0018		/* Acorn Econet			*/
+#define ETH_P_HDLC	0x0019		/* HDLC frames			*/
+#define ETH_P_ARCNET	0x001A		/* 1A for ArcNet :-)            */
+#define ETH_P_DSA	0x001B		/* Distributed Switch Arch.	*/
+#define ETH_P_TRAILER	0x001C		/* Trailer switch tagging	*/
+#define ETH_P_PHONET	0x00F5		/* Nokia Phonet frames          */
+#define ETH_P_IEEE802154 0x00F6		/* IEEE802.15.4 frame		*/
+#define ETH_P_CAIF	0x00F7		/* ST-Ericsson CAIF protocol	*/
+
+/*
+ *	This is an Ethernet frame header.
+ */
+
+struct ethhdr {
+	unsigned char	h_dest[ETH_ALEN];	/* destination eth addr	*/
+	unsigned char	h_source[ETH_ALEN];	/* source ether addr	*/
+	__be16		h_proto;		/* packet type ID field	*/
+} __attribute__((packed));
+
+
+#endif /* _UAPI_LINUX_IF_ETHER_H */
diff --git a/include/uapi/linux/if_fc.h b/include/uapi/linux/if_fc.h
new file mode 100644
index 00000000000..6ed7f1bf35c
--- /dev/null
+++ b/include/uapi/linux/if_fc.h
@@ -0,0 +1,51 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for Fibre Channel.
+ *
+ * Version:	@(#)if_fc.h	0.0	11/20/98
+ *
+ * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *		Donald Becker, <becker@super.org>
+ *    Peter De Schrijver, <stud11@cc4.kuleuven.ac.be>
+ *	  Vineet Abraham, <vma@iol.unh.edu>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_IF_FC_H
+#define _LINUX_IF_FC_H
+
+#include <linux/types.h>
+
+#define FC_ALEN	6		/* Octets in one ethernet addr	 */
+#define FC_HLEN   (sizeof(struct fch_hdr)+sizeof(struct fcllc))
+#define FC_ID_LEN 3		/* Octets in a Fibre Channel Address */
+
+/* LLC and SNAP constants */
+#define EXTENDED_SAP 0xAA
+#define UI_CMD       0x03
+
+/* This is NOT the Fibre Channel frame header. The FC frame header is
+ *  constructed in the driver as the Tachyon needs certain fields in
+ *  certains positions. So, it can't be generalized here.*/
+
+struct fch_hdr {
+	__u8  daddr[FC_ALEN];		/* destination address */
+	__u8  saddr[FC_ALEN];		/* source address */
+};
+
+/* This is a Fibre Channel LLC structure */
+struct fcllc {
+	__u8  dsap;			/* destination SAP */
+	__u8  ssap;			/* source SAP */
+	__u8  llc;			/* LLC control field */
+	__u8  protid[3];		/* protocol id */
+	__be16 ethertype;		/* ether type field */
+};
+
+#endif	/* _LINUX_IF_FC_H */
diff --git a/include/uapi/linux/if_fddi.h b/include/uapi/linux/if_fddi.h
new file mode 100644
index 00000000000..0d36909c3ae
--- /dev/null
+++ b/include/uapi/linux/if_fddi.h
@@ -0,0 +1,104 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for the ANSI FDDI interface.
+ *
+ * Version:	@(#)if_fddi.h	1.0.2	Sep 29 2004
+ *
+ * Author:	Lawrence V. Stefani, <stefani@lkg.dec.com>
+ *
+ *		if_fddi.h is based on previous if_ether.h and if_tr.h work by
+ *			Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *			Donald Becker, <becker@super.org>
+ *			Alan Cox, <alan@lxorguk.ukuu.org.uk>
+ *			Steve Whitehouse, <gw7rrm@eeshack3.swan.ac.uk>
+ *			Peter De Schrijver, <stud11@cc4.kuleuven.ac.be>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_LINUX_IF_FDDI_H
+#define _UAPI_LINUX_IF_FDDI_H
+
+#include <linux/types.h>
+
+/*
+ *  Define max and min legal sizes.  The frame sizes do not include
+ *  4 byte FCS/CRC (frame check sequence).
+ */
+#define FDDI_K_ALEN			6		/* Octets in one FDDI address */
+#define FDDI_K_8022_HLEN	16		/* Total octets in 802.2 header */
+#define FDDI_K_SNAP_HLEN	21		/* Total octets in 802.2 SNAP header */
+#define FDDI_K_8022_ZLEN	16		/* Min octets in 802.2 frame sans FCS */
+#define FDDI_K_SNAP_ZLEN	21		/* Min octets in 802.2 SNAP frame sans FCS */
+#define FDDI_K_8022_DLEN	4475	/* Max octets in 802.2 payload */
+#define FDDI_K_SNAP_DLEN	4470	/* Max octets in 802.2 SNAP payload */
+#define FDDI_K_LLC_ZLEN		13		/* Min octets in LLC frame sans FCS */
+#define FDDI_K_LLC_LEN		4491	/* Max octets in LLC frame sans FCS */
+
+/* Define FDDI Frame Control (FC) Byte values */
+#define FDDI_FC_K_VOID					0x00	
+#define FDDI_FC_K_NON_RESTRICTED_TOKEN	0x80	
+#define FDDI_FC_K_RESTRICTED_TOKEN		0xC0	
+#define FDDI_FC_K_SMT_MIN				0x41
+#define FDDI_FC_K_SMT_MAX		   		0x4F
+#define FDDI_FC_K_MAC_MIN				0xC1
+#define FDDI_FC_K_MAC_MAX		  		0xCF	
+#define FDDI_FC_K_ASYNC_LLC_MIN			0x50
+#define FDDI_FC_K_ASYNC_LLC_DEF			0x54
+#define FDDI_FC_K_ASYNC_LLC_MAX			0x5F
+#define FDDI_FC_K_SYNC_LLC_MIN			0xD0
+#define FDDI_FC_K_SYNC_LLC_MAX			0xD7
+#define FDDI_FC_K_IMPLEMENTOR_MIN		0x60
+#define FDDI_FC_K_IMPLEMENTOR_MAX  		0x6F
+#define FDDI_FC_K_RESERVED_MIN			0x70
+#define FDDI_FC_K_RESERVED_MAX			0x7F
+
+/* Define LLC and SNAP constants */
+#define FDDI_EXTENDED_SAP	0xAA
+#define FDDI_UI_CMD			0x03
+
+/* Define 802.2 Type 1 header */
+struct fddi_8022_1_hdr {
+	__u8	dsap;					/* destination service access point */
+	__u8	ssap;					/* source service access point */
+	__u8	ctrl;					/* control byte #1 */
+} __attribute__((packed));
+
+/* Define 802.2 Type 2 header */
+struct fddi_8022_2_hdr {
+	__u8	dsap;					/* destination service access point */
+	__u8	ssap;					/* source service access point */
+	__u8	ctrl_1;					/* control byte #1 */
+	__u8	ctrl_2;					/* control byte #2 */
+} __attribute__((packed));
+
+/* Define 802.2 SNAP header */
+#define FDDI_K_OUI_LEN	3
+struct fddi_snap_hdr {
+	__u8	dsap;					/* always 0xAA */
+	__u8	ssap;					/* always 0xAA */
+	__u8	ctrl;					/* always 0x03 */
+	__u8	oui[FDDI_K_OUI_LEN];	/* organizational universal id */
+	__be16	ethertype;				/* packet type ID field */
+} __attribute__((packed));
+
+/* Define FDDI LLC frame header */
+struct fddihdr {
+	__u8	fc;						/* frame control */
+	__u8	daddr[FDDI_K_ALEN];		/* destination address */
+	__u8	saddr[FDDI_K_ALEN];		/* source address */
+	union
+		{
+		struct fddi_8022_1_hdr		llc_8022_1;
+		struct fddi_8022_2_hdr		llc_8022_2;
+		struct fddi_snap_hdr		llc_snap;
+		} hdr;
+} __attribute__((packed));
+
+
+#endif /* _UAPI_LINUX_IF_FDDI_H */
diff --git a/include/uapi/linux/if_frad.h b/include/uapi/linux/if_frad.h
new file mode 100644
index 00000000000..f25b08d5eb6
--- /dev/null
+++ b/include/uapi/linux/if_frad.h
@@ -0,0 +1,122 @@
+/*
+ * DLCI/FRAD	Definitions for Frame Relay Access Devices.  DLCI devices are
+ *		created for each DLCI associated with a FRAD.  The FRAD driver
+ *		is not truly a network device, but the lower level device
+ *		handler.  This allows other FRAD manufacturers to use the DLCI
+ *		code, including its RFC1490 encapsulation alongside the current
+ *		implementation for the Sangoma cards.
+ *
+ * Version:	@(#)if_ifrad.h	0.15	31 Mar 96
+ *
+ * Author:	Mike McLagan <mike.mclagan@linux.org>
+ *
+ * Changes:
+ *		0.15	Mike McLagan	changed structure defs (packed)
+ *					re-arranged flags
+ *					added DLCI_RET vars
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _UAPI_FRAD_H_
+#define _UAPI_FRAD_H_
+
+#include <linux/if.h>
+
+/* Structures and constants associated with the DLCI device driver */
+
+struct dlci_add
+{
+   char  devname[IFNAMSIZ];
+   short dlci;
+};
+
+#define DLCI_GET_CONF	(SIOCDEVPRIVATE + 2)
+#define DLCI_SET_CONF	(SIOCDEVPRIVATE + 3)
+
+/* 
+ * These are related to the Sangoma SDLA and should remain in order. 
+ * Code within the SDLA module is based on the specifics of this 
+ * structure.  Change at your own peril.
+ */
+struct dlci_conf {
+   short flags;
+   short CIR_fwd;
+   short Bc_fwd;
+   short Be_fwd;
+   short CIR_bwd;
+   short Bc_bwd;
+   short Be_bwd; 
+
+/* these are part of the status read */
+   short Tc_fwd;
+   short Tc_bwd;
+   short Tf_max;
+   short Tb_max;
+
+/* add any new fields here above is a mirror of sdla_dlci_conf */
+};
+
+#define DLCI_GET_SLAVE	(SIOCDEVPRIVATE + 4)
+
+/* configuration flags for DLCI */
+#define DLCI_IGNORE_CIR_OUT	0x0001
+#define DLCI_ACCOUNT_CIR_IN	0x0002
+#define DLCI_BUFFER_IF		0x0008
+
+#define DLCI_VALID_FLAGS	0x000B
+
+/* defines for the actual Frame Relay hardware */
+#define FRAD_GET_CONF	(SIOCDEVPRIVATE)
+#define FRAD_SET_CONF	(SIOCDEVPRIVATE + 1)
+
+#define FRAD_LAST_IOCTL	FRAD_SET_CONF
+
+/*
+ * Based on the setup for the Sangoma SDLA.  If changes are 
+ * necessary to this structure, a routine will need to be 
+ * added to that module to copy fields.
+ */
+struct frad_conf 
+{
+   short station;
+   short flags;
+   short kbaud;
+   short clocking;
+   short mtu;
+   short T391;
+   short T392;
+   short N391;
+   short N392;
+   short N393;
+   short CIR_fwd;
+   short Bc_fwd;
+   short Be_fwd;
+   short CIR_bwd;
+   short Bc_bwd;
+   short Be_bwd;
+
+/* Add new fields here, above is a mirror of the sdla_conf */
+
+};
+
+#define FRAD_STATION_CPE	0x0000
+#define FRAD_STATION_NODE	0x0001
+
+#define FRAD_TX_IGNORE_CIR	0x0001
+#define FRAD_RX_ACCOUNT_CIR	0x0002
+#define FRAD_DROP_ABORTED	0x0004
+#define FRAD_BUFFERIF		0x0008
+#define FRAD_STATS		0x0010
+#define FRAD_MCI		0x0100
+#define FRAD_AUTODLCI		0x8000
+#define FRAD_VALID_FLAGS	0x811F
+
+#define FRAD_CLOCK_INT		0x0001
+#define FRAD_CLOCK_EXT		0x0000
+
+
+#endif /* _UAPI_FRAD_H_ */
diff --git a/include/uapi/linux/if_hippi.h b/include/uapi/linux/if_hippi.h
new file mode 100644
index 00000000000..cdc049f1829
--- /dev/null
+++ b/include/uapi/linux/if_hippi.h
@@ -0,0 +1,153 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for the HIPPI interface.
+ *
+ * Version:	@(#)if_hippi.h	1.0.0	05/26/97
+ *
+ * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *		Donald Becker, <becker@super.org>
+ *		Alan Cox, <alan@lxorguk.ukuu.org.uk>
+ *		Steve Whitehouse, <gw7rrm@eeshack3.swan.ac.uk>
+ *		Jes Sorensen, <Jes.Sorensen@cern.ch>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+ 
+#ifndef _LINUX_IF_HIPPI_H
+#define _LINUX_IF_HIPPI_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+/*
+ *	HIPPI magic constants.
+ */
+
+#define HIPPI_ALEN	6		/* Bytes in one HIPPI hw-addr	   */
+#define HIPPI_HLEN	sizeof(struct hippi_hdr)
+#define HIPPI_ZLEN	0		/* Min. bytes in frame without FCS */
+#define HIPPI_DATA_LEN	65280		/* Max. bytes in payload	   */
+#define HIPPI_FRAME_LEN	(HIPPI_DATA_LEN + HIPPI_HLEN)
+					/* Max. bytes in frame without FCS */
+
+/*
+ * Define LLC and SNAP constants.
+ */
+#define HIPPI_EXTENDED_SAP	0xAA
+#define HIPPI_UI_CMD		0x03
+
+
+/*
+ *	Do we need to list some sort of ID's here?
+ */
+
+/*
+ *	HIPPI statistics collection data. 
+ */
+ 
+struct hipnet_statistics {
+	int	rx_packets;		/* total packets received	*/
+	int	tx_packets;		/* total packets transmitted	*/
+	int	rx_errors;		/* bad packets received		*/
+	int	tx_errors;		/* packet transmit problems	*/
+	int	rx_dropped;		/* no space in linux buffers	*/
+	int	tx_dropped;		/* no space available in linux	*/
+
+	/* detailed rx_errors: */
+	int	rx_length_errors;
+	int	rx_over_errors;		/* receiver ring buff overflow	*/
+	int	rx_crc_errors;		/* recved pkt with crc error	*/
+	int	rx_frame_errors;	/* recv'd frame alignment error */
+	int	rx_fifo_errors;		/* recv'r fifo overrun		*/
+	int	rx_missed_errors;	/* receiver missed packet	*/
+
+	/* detailed tx_errors */
+	int	tx_aborted_errors;
+	int	tx_carrier_errors;
+	int	tx_fifo_errors;
+	int	tx_heartbeat_errors;
+	int	tx_window_errors;
+};
+
+
+struct hippi_fp_hdr {
+#if 0
+	__u8		ulp;				/* must contain 4 */
+#if defined (__BIG_ENDIAN_BITFIELD)
+	__u8		d1_data_present:1;		/* must be 1 */
+	__u8		start_d2_burst_boundary:1;	/* must be zero */
+	__u8		reserved:6;			/* must be zero */
+#if 0
+	__u16		reserved1:5;
+	__u16		d1_area_size:8;			/* must be 3 */
+	__u16		d2_offset:3;			/* must be zero */
+#endif
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8		reserved:6;			/* must be zero */
+	__u8	 	start_d2_burst_boundary:1;	/* must be zero */
+	__u8		d1_data_present:1;		/* must be 1 */
+#if 0
+	__u16		d2_offset:3;			/* must be zero */
+	__u16		d1_area_size:8;			/* must be 3 */
+	__u16		reserved1:5;			/* must be zero */
+#endif
+#else
+#error	"Please fix <asm/byteorder.h>"
+#endif
+#else
+	__be32		fixed;
+#endif
+	__be32		d2_size;
+} __attribute__((packed));
+
+struct hippi_le_hdr {
+#if defined (__BIG_ENDIAN_BITFIELD)
+	__u8		fc:3;
+	__u8		double_wide:1;
+	__u8		message_type:4;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8		message_type:4;
+	__u8		double_wide:1;
+	__u8		fc:3;
+#endif
+	__u8		dest_switch_addr[3];
+#if defined (__BIG_ENDIAN_BITFIELD)
+	__u8		dest_addr_type:4,
+			src_addr_type:4;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8		src_addr_type:4,
+			dest_addr_type:4;
+#endif
+	__u8		src_switch_addr[3];
+	__u16		reserved;
+	__u8		daddr[HIPPI_ALEN];
+	__u16		locally_administered;
+	__u8		saddr[HIPPI_ALEN];
+} __attribute__((packed));
+
+#define HIPPI_OUI_LEN	3
+/*
+ * Looks like the dsap and ssap fields have been swapped by mistake in
+ * RFC 2067 "IP over HIPPI".
+ */
+struct hippi_snap_hdr {
+	__u8	dsap;			/* always 0xAA */
+	__u8	ssap;			/* always 0xAA */
+	__u8	ctrl;			/* always 0x03 */
+	__u8	oui[HIPPI_OUI_LEN];	/* organizational universal id (zero)*/
+	__be16	ethertype;		/* packet type ID field */
+} __attribute__((packed));
+
+struct hippi_hdr {
+	struct hippi_fp_hdr	fp;
+	struct hippi_le_hdr	le;
+	struct hippi_snap_hdr	snap;
+} __attribute__((packed));
+
+#endif	/* _LINUX_IF_HIPPI_H */
diff --git a/include/uapi/linux/if_infiniband.h b/include/uapi/linux/if_infiniband.h
new file mode 100644
index 00000000000..7d958475d4a
--- /dev/null
+++ b/include/uapi/linux/if_infiniband.h
@@ -0,0 +1,29 @@
+/*
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available at
+ * <http://www.fsf.org/copyleft/gpl.html>, or the OpenIB.org BSD
+ * license, available in the LICENSE.TXT file accompanying this
+ * software.  These details are also available at
+ * <http://www.openfabrics.org/software_license.htm>.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * Copyright (c) 2004 Topspin Communications.  All rights reserved.
+ *
+ * $Id$
+ */
+
+#ifndef _LINUX_IF_INFINIBAND_H
+#define _LINUX_IF_INFINIBAND_H
+
+#define INFINIBAND_ALEN		20	/* Octets in IPoIB HW addr	*/
+
+#endif /* _LINUX_IF_INFINIBAND_H */
diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h
new file mode 100644
index 00000000000..5c80cb11518
--- /dev/null
+++ b/include/uapi/linux/if_link.h
@@ -0,0 +1,429 @@
+#ifndef _UAPI_LINUX_IF_LINK_H
+#define _UAPI_LINUX_IF_LINK_H
+
+#include <linux/types.h>
+#include <linux/netlink.h>
+
+/* This struct should be in sync with struct rtnl_link_stats64 */
+struct rtnl_link_stats {
+	__u32	rx_packets;		/* total packets received	*/
+	__u32	tx_packets;		/* total packets transmitted	*/
+	__u32	rx_bytes;		/* total bytes received 	*/
+	__u32	tx_bytes;		/* total bytes transmitted	*/
+	__u32	rx_errors;		/* bad packets received		*/
+	__u32	tx_errors;		/* packet transmit problems	*/
+	__u32	rx_dropped;		/* no space in linux buffers	*/
+	__u32	tx_dropped;		/* no space available in linux	*/
+	__u32	multicast;		/* multicast packets received	*/
+	__u32	collisions;
+
+	/* detailed rx_errors: */
+	__u32	rx_length_errors;
+	__u32	rx_over_errors;		/* receiver ring buff overflow	*/
+	__u32	rx_crc_errors;		/* recved pkt with crc error	*/
+	__u32	rx_frame_errors;	/* recv'd frame alignment error */
+	__u32	rx_fifo_errors;		/* recv'r fifo overrun		*/
+	__u32	rx_missed_errors;	/* receiver missed packet	*/
+
+	/* detailed tx_errors */
+	__u32	tx_aborted_errors;
+	__u32	tx_carrier_errors;
+	__u32	tx_fifo_errors;
+	__u32	tx_heartbeat_errors;
+	__u32	tx_window_errors;
+
+	/* for cslip etc */
+	__u32	rx_compressed;
+	__u32	tx_compressed;
+};
+
+/* The main device statistics structure */
+struct rtnl_link_stats64 {
+	__u64	rx_packets;		/* total packets received	*/
+	__u64	tx_packets;		/* total packets transmitted	*/
+	__u64	rx_bytes;		/* total bytes received 	*/
+	__u64	tx_bytes;		/* total bytes transmitted	*/
+	__u64	rx_errors;		/* bad packets received		*/
+	__u64	tx_errors;		/* packet transmit problems	*/
+	__u64	rx_dropped;		/* no space in linux buffers	*/
+	__u64	tx_dropped;		/* no space available in linux	*/
+	__u64	multicast;		/* multicast packets received	*/
+	__u64	collisions;
+
+	/* detailed rx_errors: */
+	__u64	rx_length_errors;
+	__u64	rx_over_errors;		/* receiver ring buff overflow	*/
+	__u64	rx_crc_errors;		/* recved pkt with crc error	*/
+	__u64	rx_frame_errors;	/* recv'd frame alignment error */
+	__u64	rx_fifo_errors;		/* recv'r fifo overrun		*/
+	__u64	rx_missed_errors;	/* receiver missed packet	*/
+
+	/* detailed tx_errors */
+	__u64	tx_aborted_errors;
+	__u64	tx_carrier_errors;
+	__u64	tx_fifo_errors;
+	__u64	tx_heartbeat_errors;
+	__u64	tx_window_errors;
+
+	/* for cslip etc */
+	__u64	rx_compressed;
+	__u64	tx_compressed;
+};
+
+/* The struct should be in sync with struct ifmap */
+struct rtnl_link_ifmap {
+	__u64	mem_start;
+	__u64	mem_end;
+	__u64	base_addr;
+	__u16	irq;
+	__u8	dma;
+	__u8	port;
+};
+
+/*
+ * IFLA_AF_SPEC
+ *   Contains nested attributes for address family specific attributes.
+ *   Each address family may create a attribute with the address family
+ *   number as type and create its own attribute structure in it.
+ *
+ *   Example:
+ *   [IFLA_AF_SPEC] = {
+ *       [AF_INET] = {
+ *           [IFLA_INET_CONF] = ...,
+ *       },
+ *       [AF_INET6] = {
+ *           [IFLA_INET6_FLAGS] = ...,
+ *           [IFLA_INET6_CONF] = ...,
+ *       }
+ *   }
+ */
+
+enum {
+	IFLA_UNSPEC,
+	IFLA_ADDRESS,
+	IFLA_BROADCAST,
+	IFLA_IFNAME,
+	IFLA_MTU,
+	IFLA_LINK,
+	IFLA_QDISC,
+	IFLA_STATS,
+	IFLA_COST,
+#define IFLA_COST IFLA_COST
+	IFLA_PRIORITY,
+#define IFLA_PRIORITY IFLA_PRIORITY
+	IFLA_MASTER,
+#define IFLA_MASTER IFLA_MASTER
+	IFLA_WIRELESS,		/* Wireless Extension event - see wireless.h */
+#define IFLA_WIRELESS IFLA_WIRELESS
+	IFLA_PROTINFO,		/* Protocol specific information for a link */
+#define IFLA_PROTINFO IFLA_PROTINFO
+	IFLA_TXQLEN,
+#define IFLA_TXQLEN IFLA_TXQLEN
+	IFLA_MAP,
+#define IFLA_MAP IFLA_MAP
+	IFLA_WEIGHT,
+#define IFLA_WEIGHT IFLA_WEIGHT
+	IFLA_OPERSTATE,
+	IFLA_LINKMODE,
+	IFLA_LINKINFO,
+#define IFLA_LINKINFO IFLA_LINKINFO
+	IFLA_NET_NS_PID,
+	IFLA_IFALIAS,
+	IFLA_NUM_VF,		/* Number of VFs if device is SR-IOV PF */
+	IFLA_VFINFO_LIST,
+	IFLA_STATS64,
+	IFLA_VF_PORTS,
+	IFLA_PORT_SELF,
+	IFLA_AF_SPEC,
+	IFLA_GROUP,		/* Group the device belongs to */
+	IFLA_NET_NS_FD,
+	IFLA_EXT_MASK,		/* Extended info mask, VFs, etc */
+	IFLA_PROMISCUITY,	/* Promiscuity count: > 0 means acts PROMISC */
+#define IFLA_PROMISCUITY IFLA_PROMISCUITY
+	IFLA_NUM_TX_QUEUES,
+	IFLA_NUM_RX_QUEUES,
+	__IFLA_MAX
+};
+
+
+#define IFLA_MAX (__IFLA_MAX - 1)
+
+/* backwards compatibility for userspace */
+#ifndef __KERNEL__
+#define IFLA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifinfomsg))))
+#define IFLA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifinfomsg))
+#endif
+
+enum {
+	IFLA_INET_UNSPEC,
+	IFLA_INET_CONF,
+	__IFLA_INET_MAX,
+};
+
+#define IFLA_INET_MAX (__IFLA_INET_MAX - 1)
+
+/* ifi_flags.
+
+   IFF_* flags.
+
+   The only change is:
+   IFF_LOOPBACK, IFF_BROADCAST and IFF_POINTOPOINT are
+   more not changeable by user. They describe link media
+   characteristics and set by device driver.
+
+   Comments:
+   - Combination IFF_BROADCAST|IFF_POINTOPOINT is invalid
+   - If neither of these three flags are set;
+     the interface is NBMA.
+
+   - IFF_MULTICAST does not mean anything special:
+   multicasts can be used on all not-NBMA links.
+   IFF_MULTICAST means that this media uses special encapsulation
+   for multicast frames. Apparently, all IFF_POINTOPOINT and
+   IFF_BROADCAST devices are able to use multicasts too.
+ */
+
+/* IFLA_LINK.
+   For usual devices it is equal ifi_index.
+   If it is a "virtual interface" (f.e. tunnel), ifi_link
+   can point to real physical interface (f.e. for bandwidth calculations),
+   or maybe 0, what means, that real media is unknown (usual
+   for IPIP tunnels, when route to endpoint is allowed to change)
+ */
+
+/* Subtype attributes for IFLA_PROTINFO */
+enum {
+	IFLA_INET6_UNSPEC,
+	IFLA_INET6_FLAGS,	/* link flags			*/
+	IFLA_INET6_CONF,	/* sysctl parameters		*/
+	IFLA_INET6_STATS,	/* statistics			*/
+	IFLA_INET6_MCAST,	/* MC things. What of them?	*/
+	IFLA_INET6_CACHEINFO,	/* time values and max reasm size */
+	IFLA_INET6_ICMP6STATS,	/* statistics (icmpv6)		*/
+	__IFLA_INET6_MAX
+};
+
+#define IFLA_INET6_MAX	(__IFLA_INET6_MAX - 1)
+
+struct ifla_cacheinfo {
+	__u32	max_reasm_len;
+	__u32	tstamp;		/* ipv6InterfaceTable updated timestamp */
+	__u32	reachable_time;
+	__u32	retrans_time;
+};
+
+enum {
+	IFLA_INFO_UNSPEC,
+	IFLA_INFO_KIND,
+	IFLA_INFO_DATA,
+	IFLA_INFO_XSTATS,
+	__IFLA_INFO_MAX,
+};
+
+#define IFLA_INFO_MAX	(__IFLA_INFO_MAX - 1)
+
+/* VLAN section */
+
+enum {
+	IFLA_VLAN_UNSPEC,
+	IFLA_VLAN_ID,
+	IFLA_VLAN_FLAGS,
+	IFLA_VLAN_EGRESS_QOS,
+	IFLA_VLAN_INGRESS_QOS,
+	__IFLA_VLAN_MAX,
+};
+
+#define IFLA_VLAN_MAX	(__IFLA_VLAN_MAX - 1)
+
+struct ifla_vlan_flags {
+	__u32	flags;
+	__u32	mask;
+};
+
+enum {
+	IFLA_VLAN_QOS_UNSPEC,
+	IFLA_VLAN_QOS_MAPPING,
+	__IFLA_VLAN_QOS_MAX
+};
+
+#define IFLA_VLAN_QOS_MAX	(__IFLA_VLAN_QOS_MAX - 1)
+
+struct ifla_vlan_qos_mapping {
+	__u32 from;
+	__u32 to;
+};
+
+/* MACVLAN section */
+enum {
+	IFLA_MACVLAN_UNSPEC,
+	IFLA_MACVLAN_MODE,
+	IFLA_MACVLAN_FLAGS,
+	__IFLA_MACVLAN_MAX,
+};
+
+#define IFLA_MACVLAN_MAX (__IFLA_MACVLAN_MAX - 1)
+
+enum macvlan_mode {
+	MACVLAN_MODE_PRIVATE = 1, /* don't talk to other macvlans */
+	MACVLAN_MODE_VEPA    = 2, /* talk to other ports through ext bridge */
+	MACVLAN_MODE_BRIDGE  = 4, /* talk to bridge ports directly */
+	MACVLAN_MODE_PASSTHRU = 8,/* take over the underlying device */
+};
+
+#define MACVLAN_FLAG_NOPROMISC	1
+
+/* VXLAN section */
+enum {
+	IFLA_VXLAN_UNSPEC,
+	IFLA_VXLAN_ID,
+	IFLA_VXLAN_GROUP,
+	IFLA_VXLAN_LINK,
+	IFLA_VXLAN_LOCAL,
+	IFLA_VXLAN_TTL,
+	IFLA_VXLAN_TOS,
+	IFLA_VXLAN_LEARNING,
+	IFLA_VXLAN_AGEING,
+	IFLA_VXLAN_LIMIT,
+	IFLA_VXLAN_PORT_RANGE,
+	__IFLA_VXLAN_MAX
+};
+#define IFLA_VXLAN_MAX	(__IFLA_VXLAN_MAX - 1)
+
+struct ifla_vxlan_port_range {
+	__be16	low;
+	__be16	high;
+};
+
+/* SR-IOV virtual function management section */
+
+enum {
+	IFLA_VF_INFO_UNSPEC,
+	IFLA_VF_INFO,
+	__IFLA_VF_INFO_MAX,
+};
+
+#define IFLA_VF_INFO_MAX (__IFLA_VF_INFO_MAX - 1)
+
+enum {
+	IFLA_VF_UNSPEC,
+	IFLA_VF_MAC,		/* Hardware queue specific attributes */
+	IFLA_VF_VLAN,
+	IFLA_VF_TX_RATE,	/* TX Bandwidth Allocation */
+	IFLA_VF_SPOOFCHK,	/* Spoof Checking on/off switch */
+	__IFLA_VF_MAX,
+};
+
+#define IFLA_VF_MAX (__IFLA_VF_MAX - 1)
+
+struct ifla_vf_mac {
+	__u32 vf;
+	__u8 mac[32]; /* MAX_ADDR_LEN */
+};
+
+struct ifla_vf_vlan {
+	__u32 vf;
+	__u32 vlan; /* 0 - 4095, 0 disables VLAN filter */
+	__u32 qos;
+};
+
+struct ifla_vf_tx_rate {
+	__u32 vf;
+	__u32 rate; /* Max TX bandwidth in Mbps, 0 disables throttling */
+};
+
+struct ifla_vf_spoofchk {
+	__u32 vf;
+	__u32 setting;
+};
+
+/* VF ports management section
+ *
+ *	Nested layout of set/get msg is:
+ *
+ *		[IFLA_NUM_VF]
+ *		[IFLA_VF_PORTS]
+ *			[IFLA_VF_PORT]
+ *				[IFLA_PORT_*], ...
+ *			[IFLA_VF_PORT]
+ *				[IFLA_PORT_*], ...
+ *			...
+ *		[IFLA_PORT_SELF]
+ *			[IFLA_PORT_*], ...
+ */
+
+enum {
+	IFLA_VF_PORT_UNSPEC,
+	IFLA_VF_PORT,			/* nest */
+	__IFLA_VF_PORT_MAX,
+};
+
+#define IFLA_VF_PORT_MAX (__IFLA_VF_PORT_MAX - 1)
+
+enum {
+	IFLA_PORT_UNSPEC,
+	IFLA_PORT_VF,			/* __u32 */
+	IFLA_PORT_PROFILE,		/* string */
+	IFLA_PORT_VSI_TYPE,		/* 802.1Qbg (pre-)standard VDP */
+	IFLA_PORT_INSTANCE_UUID,	/* binary UUID */
+	IFLA_PORT_HOST_UUID,		/* binary UUID */
+	IFLA_PORT_REQUEST,		/* __u8 */
+	IFLA_PORT_RESPONSE,		/* __u16, output only */
+	__IFLA_PORT_MAX,
+};
+
+#define IFLA_PORT_MAX (__IFLA_PORT_MAX - 1)
+
+#define PORT_PROFILE_MAX	40
+#define PORT_UUID_MAX		16
+#define PORT_SELF_VF		-1
+
+enum {
+	PORT_REQUEST_PREASSOCIATE = 0,
+	PORT_REQUEST_PREASSOCIATE_RR,
+	PORT_REQUEST_ASSOCIATE,
+	PORT_REQUEST_DISASSOCIATE,
+};
+
+enum {
+	PORT_VDP_RESPONSE_SUCCESS = 0,
+	PORT_VDP_RESPONSE_INVALID_FORMAT,
+	PORT_VDP_RESPONSE_INSUFFICIENT_RESOURCES,
+	PORT_VDP_RESPONSE_UNUSED_VTID,
+	PORT_VDP_RESPONSE_VTID_VIOLATION,
+	PORT_VDP_RESPONSE_VTID_VERSION_VIOALTION,
+	PORT_VDP_RESPONSE_OUT_OF_SYNC,
+	/* 0x08-0xFF reserved for future VDP use */
+	PORT_PROFILE_RESPONSE_SUCCESS = 0x100,
+	PORT_PROFILE_RESPONSE_INPROGRESS,
+	PORT_PROFILE_RESPONSE_INVALID,
+	PORT_PROFILE_RESPONSE_BADSTATE,
+	PORT_PROFILE_RESPONSE_INSUFFICIENT_RESOURCES,
+	PORT_PROFILE_RESPONSE_ERROR,
+};
+
+struct ifla_port_vsi {
+	__u8 vsi_mgr_id;
+	__u8 vsi_type_id[3];
+	__u8 vsi_type_version;
+	__u8 pad[3];
+};
+
+
+/* IPoIB section */
+
+enum {
+	IFLA_IPOIB_UNSPEC,
+	IFLA_IPOIB_PKEY,
+	IFLA_IPOIB_MODE,
+	IFLA_IPOIB_UMCAST,
+	__IFLA_IPOIB_MAX
+};
+
+enum {
+	IPOIB_MODE_DATAGRAM  = 0, /* using unreliable datagram QPs */
+	IPOIB_MODE_CONNECTED = 1, /* using connected QPs */
+};
+
+#define IFLA_IPOIB_MAX (__IFLA_IPOIB_MAX - 1)
+
+#endif /* _UAPI_LINUX_IF_LINK_H */
diff --git a/include/uapi/linux/if_ltalk.h b/include/uapi/linux/if_ltalk.h
new file mode 100644
index 00000000000..b92c1fb6ac1
--- /dev/null
+++ b/include/uapi/linux/if_ltalk.h
@@ -0,0 +1,9 @@
+#ifndef _UAPI__LINUX_LTALK_H
+#define _UAPI__LINUX_LTALK_H
+
+#define LTALK_HLEN		1
+#define LTALK_MTU		600
+#define LTALK_ALEN		1
+
+
+#endif /* _UAPI__LINUX_LTALK_H */
diff --git a/include/uapi/linux/if_packet.h b/include/uapi/linux/if_packet.h
new file mode 100644
index 00000000000..f3799295d23
--- /dev/null
+++ b/include/uapi/linux/if_packet.h
@@ -0,0 +1,272 @@
+#ifndef __LINUX_IF_PACKET_H
+#define __LINUX_IF_PACKET_H
+
+#include <linux/types.h>
+
+struct sockaddr_pkt {
+	unsigned short spkt_family;
+	unsigned char spkt_device[14];
+	__be16 spkt_protocol;
+};
+
+struct sockaddr_ll {
+	unsigned short	sll_family;
+	__be16		sll_protocol;
+	int		sll_ifindex;
+	unsigned short	sll_hatype;
+	unsigned char	sll_pkttype;
+	unsigned char	sll_halen;
+	unsigned char	sll_addr[8];
+};
+
+/* Packet types */
+
+#define PACKET_HOST		0		/* To us		*/
+#define PACKET_BROADCAST	1		/* To all		*/
+#define PACKET_MULTICAST	2		/* To group		*/
+#define PACKET_OTHERHOST	3		/* To someone else 	*/
+#define PACKET_OUTGOING		4		/* Outgoing of any type */
+/* These ones are invisible by user level */
+#define PACKET_LOOPBACK		5		/* MC/BRD frame looped back */
+#define PACKET_FASTROUTE	6		/* Fastrouted frame	*/
+
+/* Packet socket options */
+
+#define PACKET_ADD_MEMBERSHIP		1
+#define PACKET_DROP_MEMBERSHIP		2
+#define PACKET_RECV_OUTPUT		3
+/* Value 4 is still used by obsolete turbo-packet. */
+#define PACKET_RX_RING			5
+#define PACKET_STATISTICS		6
+#define PACKET_COPY_THRESH		7
+#define PACKET_AUXDATA			8
+#define PACKET_ORIGDEV			9
+#define PACKET_VERSION			10
+#define PACKET_HDRLEN			11
+#define PACKET_RESERVE			12
+#define PACKET_TX_RING			13
+#define PACKET_LOSS			14
+#define PACKET_VNET_HDR			15
+#define PACKET_TX_TIMESTAMP		16
+#define PACKET_TIMESTAMP		17
+#define PACKET_FANOUT			18
+
+#define PACKET_FANOUT_HASH		0
+#define PACKET_FANOUT_LB		1
+#define PACKET_FANOUT_CPU		2
+#define PACKET_FANOUT_FLAG_DEFRAG	0x8000
+
+struct tpacket_stats {
+	unsigned int	tp_packets;
+	unsigned int	tp_drops;
+};
+
+struct tpacket_stats_v3 {
+	unsigned int	tp_packets;
+	unsigned int	tp_drops;
+	unsigned int	tp_freeze_q_cnt;
+};
+
+union tpacket_stats_u {
+	struct tpacket_stats stats1;
+	struct tpacket_stats_v3 stats3;
+};
+
+struct tpacket_auxdata {
+	__u32		tp_status;
+	__u32		tp_len;
+	__u32		tp_snaplen;
+	__u16		tp_mac;
+	__u16		tp_net;
+	__u16		tp_vlan_tci;
+	__u16		tp_padding;
+};
+
+/* Rx ring - header status */
+#define TP_STATUS_KERNEL	0x0
+#define TP_STATUS_USER		0x1
+#define TP_STATUS_COPY		0x2
+#define TP_STATUS_LOSING	0x4
+#define TP_STATUS_CSUMNOTREADY	0x8
+#define TP_STATUS_VLAN_VALID   0x10 /* auxdata has valid tp_vlan_tci */
+#define TP_STATUS_BLK_TMO	0x20
+
+/* Tx ring - header status */
+#define TP_STATUS_AVAILABLE	0x0
+#define TP_STATUS_SEND_REQUEST	0x1
+#define TP_STATUS_SENDING	0x2
+#define TP_STATUS_WRONG_FORMAT	0x4
+
+/* Rx ring - feature request bits */
+#define TP_FT_REQ_FILL_RXHASH	0x1
+
+struct tpacket_hdr {
+	unsigned long	tp_status;
+	unsigned int	tp_len;
+	unsigned int	tp_snaplen;
+	unsigned short	tp_mac;
+	unsigned short	tp_net;
+	unsigned int	tp_sec;
+	unsigned int	tp_usec;
+};
+
+#define TPACKET_ALIGNMENT	16
+#define TPACKET_ALIGN(x)	(((x)+TPACKET_ALIGNMENT-1)&~(TPACKET_ALIGNMENT-1))
+#define TPACKET_HDRLEN		(TPACKET_ALIGN(sizeof(struct tpacket_hdr)) + sizeof(struct sockaddr_ll))
+
+struct tpacket2_hdr {
+	__u32		tp_status;
+	__u32		tp_len;
+	__u32		tp_snaplen;
+	__u16		tp_mac;
+	__u16		tp_net;
+	__u32		tp_sec;
+	__u32		tp_nsec;
+	__u16		tp_vlan_tci;
+	__u16		tp_padding;
+};
+
+struct tpacket_hdr_variant1 {
+	__u32	tp_rxhash;
+	__u32	tp_vlan_tci;
+};
+
+struct tpacket3_hdr {
+	__u32		tp_next_offset;
+	__u32		tp_sec;
+	__u32		tp_nsec;
+	__u32		tp_snaplen;
+	__u32		tp_len;
+	__u32		tp_status;
+	__u16		tp_mac;
+	__u16		tp_net;
+	/* pkt_hdr variants */
+	union {
+		struct tpacket_hdr_variant1 hv1;
+	};
+};
+
+struct tpacket_bd_ts {
+	unsigned int ts_sec;
+	union {
+		unsigned int ts_usec;
+		unsigned int ts_nsec;
+	};
+};
+
+struct tpacket_hdr_v1 {
+	__u32	block_status;
+	__u32	num_pkts;
+	__u32	offset_to_first_pkt;
+
+	/* Number of valid bytes (including padding)
+	 * blk_len <= tp_block_size
+	 */
+	__u32	blk_len;
+
+	/*
+	 * Quite a few uses of sequence number:
+	 * 1. Make sure cache flush etc worked.
+	 *    Well, one can argue - why not use the increasing ts below?
+	 *    But look at 2. below first.
+	 * 2. When you pass around blocks to other user space decoders,
+	 *    you can see which blk[s] is[are] outstanding etc.
+	 * 3. Validate kernel code.
+	 */
+	__aligned_u64	seq_num;
+
+	/*
+	 * ts_last_pkt:
+	 *
+	 * Case 1.	Block has 'N'(N >=1) packets and TMO'd(timed out)
+	 *		ts_last_pkt == 'time-stamp of last packet' and NOT the
+	 *		time when the timer fired and the block was closed.
+	 *		By providing the ts of the last packet we can absolutely
+	 *		guarantee that time-stamp wise, the first packet in the
+	 *		next block will never precede the last packet of the
+	 *		previous block.
+	 * Case 2.	Block has zero packets and TMO'd
+	 *		ts_last_pkt = time when the timer fired and the block
+	 *		was closed.
+	 * Case 3.	Block has 'N' packets and NO TMO.
+	 *		ts_last_pkt = time-stamp of the last pkt in the block.
+	 *
+	 * ts_first_pkt:
+	 *		Is always the time-stamp when the block was opened.
+	 *		Case a)	ZERO packets
+	 *			No packets to deal with but atleast you know the
+	 *			time-interval of this block.
+	 *		Case b) Non-zero packets
+	 *			Use the ts of the first packet in the block.
+	 *
+	 */
+	struct tpacket_bd_ts	ts_first_pkt, ts_last_pkt;
+};
+
+union tpacket_bd_header_u {
+	struct tpacket_hdr_v1 bh1;
+};
+
+struct tpacket_block_desc {
+	__u32 version;
+	__u32 offset_to_priv;
+	union tpacket_bd_header_u hdr;
+};
+
+#define TPACKET2_HDRLEN		(TPACKET_ALIGN(sizeof(struct tpacket2_hdr)) + sizeof(struct sockaddr_ll))
+#define TPACKET3_HDRLEN		(TPACKET_ALIGN(sizeof(struct tpacket3_hdr)) + sizeof(struct sockaddr_ll))
+
+enum tpacket_versions {
+	TPACKET_V1,
+	TPACKET_V2,
+	TPACKET_V3
+};
+
+/*
+   Frame structure:
+
+   - Start. Frame must be aligned to TPACKET_ALIGNMENT=16
+   - struct tpacket_hdr
+   - pad to TPACKET_ALIGNMENT=16
+   - struct sockaddr_ll
+   - Gap, chosen so that packet data (Start+tp_net) alignes to TPACKET_ALIGNMENT=16
+   - Start+tp_mac: [ Optional MAC header ]
+   - Start+tp_net: Packet data, aligned to TPACKET_ALIGNMENT=16.
+   - Pad to align to TPACKET_ALIGNMENT=16
+ */
+
+struct tpacket_req {
+	unsigned int	tp_block_size;	/* Minimal size of contiguous block */
+	unsigned int	tp_block_nr;	/* Number of blocks */
+	unsigned int	tp_frame_size;	/* Size of frame */
+	unsigned int	tp_frame_nr;	/* Total number of frames */
+};
+
+struct tpacket_req3 {
+	unsigned int	tp_block_size;	/* Minimal size of contiguous block */
+	unsigned int	tp_block_nr;	/* Number of blocks */
+	unsigned int	tp_frame_size;	/* Size of frame */
+	unsigned int	tp_frame_nr;	/* Total number of frames */
+	unsigned int	tp_retire_blk_tov; /* timeout in msecs */
+	unsigned int	tp_sizeof_priv; /* offset to private data area */
+	unsigned int	tp_feature_req_word;
+};
+
+union tpacket_req_u {
+	struct tpacket_req	req;
+	struct tpacket_req3	req3;
+};
+
+struct packet_mreq {
+	int		mr_ifindex;
+	unsigned short	mr_type;
+	unsigned short	mr_alen;
+	unsigned char	mr_address[8];
+};
+
+#define PACKET_MR_MULTICAST	0
+#define PACKET_MR_PROMISC	1
+#define PACKET_MR_ALLMULTI	2
+#define PACKET_MR_UNICAST	3
+
+#endif
diff --git a/include/uapi/linux/if_phonet.h b/include/uapi/linux/if_phonet.h
new file mode 100644
index 00000000000..f7ad9e24eb3
--- /dev/null
+++ b/include/uapi/linux/if_phonet.h
@@ -0,0 +1,16 @@
+/*
+ * File: if_phonet.h
+ *
+ * Phonet interface kernel definitions
+ *
+ * Copyright (C) 2008 Nokia Corporation. All rights reserved.
+ */
+#ifndef _UAPILINUX_IF_PHONET_H
+#define _UAPILINUX_IF_PHONET_H
+
+#define PHONET_MIN_MTU		6	/* pn_length = 0 */
+#define PHONET_MAX_MTU		65541	/* pn_length = 0xffff */
+#define PHONET_DEV_MTU		PHONET_MAX_MTU
+
+
+#endif /* _UAPILINUX_IF_PHONET_H */
diff --git a/include/uapi/linux/if_plip.h b/include/uapi/linux/if_plip.h
new file mode 100644
index 00000000000..6298c7e88b2
--- /dev/null
+++ b/include/uapi/linux/if_plip.h
@@ -0,0 +1,27 @@
+/*
+ *	NET3	PLIP tuning facilities for the new Niibe PLIP.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ */
+ 
+#ifndef _LINUX_IF_PLIP_H
+#define _LINUX_IF_PLIP_H
+
+#include <linux/sockios.h>
+
+#define	SIOCDEVPLIP	SIOCDEVPRIVATE
+
+struct plipconf {
+	unsigned short pcmd;
+	unsigned long  nibble;
+	unsigned long  trigger;
+};
+
+#define PLIP_GET_TIMEOUT	0x1
+#define PLIP_SET_TIMEOUT	0x2
+
+#endif
diff --git a/include/uapi/linux/if_ppp.h b/include/uapi/linux/if_ppp.h
new file mode 100644
index 00000000000..9048fabb7a4
--- /dev/null
+++ b/include/uapi/linux/if_ppp.h
@@ -0,0 +1 @@
+#include <linux/ppp-ioctl.h>
diff --git a/include/uapi/linux/if_pppol2tp.h b/include/uapi/linux/if_pppol2tp.h
new file mode 100644
index 00000000000..163e8adac2d
--- /dev/null
+++ b/include/uapi/linux/if_pppol2tp.h
@@ -0,0 +1,104 @@
+/***************************************************************************
+ * Linux PPP over L2TP (PPPoL2TP) Socket Implementation (RFC 2661)
+ *
+ * This file supplies definitions required by the PPP over L2TP driver
+ * (l2tp_ppp.c).  All version information wrt this file is located in l2tp_ppp.c
+ *
+ * License:
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ */
+
+#ifndef _UAPI__LINUX_IF_PPPOL2TP_H
+#define _UAPI__LINUX_IF_PPPOL2TP_H
+
+#include <linux/types.h>
+
+
+/* Structure used to connect() the socket to a particular tunnel UDP
+ * socket over IPv4.
+ */
+struct pppol2tp_addr {
+	__kernel_pid_t	pid;		/* pid that owns the fd.
+					 * 0 => current */
+	int	fd;			/* FD of UDP socket to use */
+
+	struct sockaddr_in addr;	/* IP address and port to send to */
+
+	__u16 s_tunnel, s_session;	/* For matching incoming packets */
+	__u16 d_tunnel, d_session;	/* For sending outgoing packets */
+};
+
+/* Structure used to connect() the socket to a particular tunnel UDP
+ * socket over IPv6.
+ */
+struct pppol2tpin6_addr {
+	__kernel_pid_t	pid;		/* pid that owns the fd.
+					 * 0 => current */
+	int	fd;			/* FD of UDP socket to use */
+
+	__u16 s_tunnel, s_session;	/* For matching incoming packets */
+	__u16 d_tunnel, d_session;	/* For sending outgoing packets */
+
+	struct sockaddr_in6 addr;	/* IP address and port to send to */
+};
+
+/* The L2TPv3 protocol changes tunnel and session ids from 16 to 32
+ * bits. So we need a different sockaddr structure.
+ */
+struct pppol2tpv3_addr {
+	__kernel_pid_t	pid;		/* pid that owns the fd.
+					 * 0 => current */
+	int	fd;			/* FD of UDP or IP socket to use */
+
+	struct sockaddr_in addr;	/* IP address and port to send to */
+
+	__u32 s_tunnel, s_session;	/* For matching incoming packets */
+	__u32 d_tunnel, d_session;	/* For sending outgoing packets */
+};
+
+struct pppol2tpv3in6_addr {
+	__kernel_pid_t	pid;		/* pid that owns the fd.
+					 * 0 => current */
+	int	fd;			/* FD of UDP or IP socket to use */
+
+	__u32 s_tunnel, s_session;	/* For matching incoming packets */
+	__u32 d_tunnel, d_session;	/* For sending outgoing packets */
+
+	struct sockaddr_in6 addr;	/* IP address and port to send to */
+};
+
+/* Socket options:
+ * DEBUG	- bitmask of debug message categories
+ * SENDSEQ	- 0 => don't send packets with sequence numbers
+ *		  1 => send packets with sequence numbers
+ * RECVSEQ	- 0 => receive packet sequence numbers are optional
+ *		  1 => drop receive packets without sequence numbers
+ * LNSMODE	- 0 => act as LAC.
+ *		  1 => act as LNS.
+ * REORDERTO	- reorder timeout (in millisecs). If 0, don't try to reorder.
+ */
+enum {
+	PPPOL2TP_SO_DEBUG	= 1,
+	PPPOL2TP_SO_RECVSEQ	= 2,
+	PPPOL2TP_SO_SENDSEQ	= 3,
+	PPPOL2TP_SO_LNSMODE	= 4,
+	PPPOL2TP_SO_REORDERTO	= 5,
+};
+
+/* Debug message categories for the DEBUG socket option */
+enum {
+	PPPOL2TP_MSG_DEBUG	= (1 << 0),	/* verbose debug (if
+						 * compiled in) */
+	PPPOL2TP_MSG_CONTROL	= (1 << 1),	/* userspace - kernel
+						 * interface */
+	PPPOL2TP_MSG_SEQ	= (1 << 2),	/* sequence numbers */
+	PPPOL2TP_MSG_DATA	= (1 << 3),	/* data packets */
+};
+
+
+
+#endif /* _UAPI__LINUX_IF_PPPOL2TP_H */
diff --git a/include/uapi/linux/if_pppox.h b/include/uapi/linux/if_pppox.h
new file mode 100644
index 00000000000..0b46fd57c8f
--- /dev/null
+++ b/include/uapi/linux/if_pppox.h
@@ -0,0 +1,156 @@
+/***************************************************************************
+ * Linux PPP over X - Generic PPP transport layer sockets
+ * Linux PPP over Ethernet (PPPoE) Socket Implementation (RFC 2516) 
+ *
+ * This file supplies definitions required by the PPP over Ethernet driver
+ * (pppox.c).  All version information wrt this file is located in pppox.c
+ *
+ * License:
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ */
+
+#ifndef _UAPI__LINUX_IF_PPPOX_H
+#define _UAPI__LINUX_IF_PPPOX_H
+
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+#include <linux/socket.h>
+#include <linux/if_ether.h>
+#include <linux/if_pppol2tp.h>
+
+/* For user-space programs to pick up these definitions
+ * which they wouldn't get otherwise without defining __KERNEL__
+ */
+#ifndef AF_PPPOX
+#define AF_PPPOX	24
+#define PF_PPPOX	AF_PPPOX
+#endif /* !(AF_PPPOX) */
+
+/************************************************************************ 
+ * PPPoE addressing definition 
+ */ 
+typedef __be16 sid_t;
+struct pppoe_addr {
+	sid_t         sid;                    /* Session identifier */
+	unsigned char remote[ETH_ALEN];       /* Remote address */
+	char          dev[IFNAMSIZ];          /* Local device to use */
+}; 
+ 
+/************************************************************************ 
+ * PPTP addressing definition
+ */
+struct pptp_addr {
+	__be16		call_id;
+	struct in_addr	sin_addr;
+};
+
+/************************************************************************
+ * Protocols supported by AF_PPPOX
+ */
+#define PX_PROTO_OE    0 /* Currently just PPPoE */
+#define PX_PROTO_OL2TP 1 /* Now L2TP also */
+#define PX_PROTO_PPTP  2
+#define PX_MAX_PROTO   3
+
+struct sockaddr_pppox {
+	__kernel_sa_family_t sa_family;       /* address family, AF_PPPOX */
+	unsigned int    sa_protocol;          /* protocol identifier */
+	union {
+		struct pppoe_addr  pppoe;
+		struct pptp_addr   pptp;
+	} sa_addr;
+} __packed;
+
+/* The use of the above union isn't viable because the size of this
+ * struct must stay fixed over time -- applications use sizeof(struct
+ * sockaddr_pppox) to fill it. We use a protocol specific sockaddr
+ * type instead.
+ */
+struct sockaddr_pppol2tp {
+	__kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
+	unsigned int    sa_protocol;    /* protocol identifier */
+	struct pppol2tp_addr pppol2tp;
+} __packed;
+
+struct sockaddr_pppol2tpin6 {
+	__kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
+	unsigned int    sa_protocol;    /* protocol identifier */
+	struct pppol2tpin6_addr pppol2tp;
+} __packed;
+
+/* The L2TPv3 protocol changes tunnel and session ids from 16 to 32
+ * bits. So we need a different sockaddr structure.
+ */
+struct sockaddr_pppol2tpv3 {
+	__kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
+	unsigned int    sa_protocol;    /* protocol identifier */
+	struct pppol2tpv3_addr pppol2tp;
+} __packed;
+
+struct sockaddr_pppol2tpv3in6 {
+	__kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
+	unsigned int    sa_protocol;    /* protocol identifier */
+	struct pppol2tpv3in6_addr pppol2tp;
+} __packed;
+
+/*********************************************************************
+ *
+ * ioctl interface for defining forwarding of connections
+ *
+ ********************************************************************/
+
+#define PPPOEIOCSFWD	_IOW(0xB1 ,0, size_t)
+#define PPPOEIOCDFWD	_IO(0xB1 ,1)
+/*#define PPPOEIOCGFWD	_IOWR(0xB1,2, size_t)*/
+
+/* Codes to identify message types */
+#define PADI_CODE	0x09
+#define PADO_CODE	0x07
+#define PADR_CODE	0x19
+#define PADS_CODE	0x65
+#define PADT_CODE	0xa7
+struct pppoe_tag {
+	__be16 tag_type;
+	__be16 tag_len;
+	char tag_data[0];
+} __attribute__ ((packed));
+
+/* Tag identifiers */
+#define PTT_EOL		__cpu_to_be16(0x0000)
+#define PTT_SRV_NAME	__cpu_to_be16(0x0101)
+#define PTT_AC_NAME	__cpu_to_be16(0x0102)
+#define PTT_HOST_UNIQ	__cpu_to_be16(0x0103)
+#define PTT_AC_COOKIE	__cpu_to_be16(0x0104)
+#define PTT_VENDOR 	__cpu_to_be16(0x0105)
+#define PTT_RELAY_SID	__cpu_to_be16(0x0110)
+#define PTT_SRV_ERR     __cpu_to_be16(0x0201)
+#define PTT_SYS_ERR  	__cpu_to_be16(0x0202)
+#define PTT_GEN_ERR  	__cpu_to_be16(0x0203)
+
+struct pppoe_hdr {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 ver : 4;
+	__u8 type : 4;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	__u8 type : 4;
+	__u8 ver : 4;
+#else
+#error	"Please fix <asm/byteorder.h>"
+#endif
+	__u8 code;
+	__be16 sid;
+	__be16 length;
+	struct pppoe_tag tag[0];
+} __packed;
+
+/* Length of entire PPPoE + PPP header */
+#define PPPOE_SES_HLEN	8
+
+
+#endif /* _UAPI__LINUX_IF_PPPOX_H */
diff --git a/include/uapi/linux/if_slip.h b/include/uapi/linux/if_slip.h
new file mode 100644
index 00000000000..1eb4e3a8397
--- /dev/null
+++ b/include/uapi/linux/if_slip.h
@@ -0,0 +1,30 @@
+/*
+ *	Swansea University Computer Society	NET3
+ *	
+ *	This file declares the constants of special use with the SLIP/CSLIP/
+ *	KISS TNC driver.
+ */
+ 
+#ifndef __LINUX_SLIP_H
+#define __LINUX_SLIP_H
+
+#define		SL_MODE_SLIP		0
+#define		SL_MODE_CSLIP		1
+#define 	SL_MODE_KISS		4
+
+#define		SL_OPT_SIXBIT		2
+#define		SL_OPT_ADAPTIVE		8
+
+/*
+ *	VSV = ioctl for keepalive & outfill in SLIP driver 
+ */
+ 
+#define SIOCSKEEPALIVE	(SIOCDEVPRIVATE)		/* Set keepalive timeout in sec */
+#define SIOCGKEEPALIVE	(SIOCDEVPRIVATE+1)		/* Get keepalive timeout */
+#define SIOCSOUTFILL	(SIOCDEVPRIVATE+2)		/* Set outfill timeout */
+#define	SIOCGOUTFILL	(SIOCDEVPRIVATE+3)		/* Get outfill timeout */
+#define SIOCSLEASE	(SIOCDEVPRIVATE+4)		/* Set "leased" line type */
+#define	SIOCGLEASE	(SIOCDEVPRIVATE+5)		/* Get line type */
+
+
+#endif
diff --git a/include/uapi/linux/if_team.h b/include/uapi/linux/if_team.h
new file mode 100644
index 00000000000..7b8fa339de3
--- /dev/null
+++ b/include/uapi/linux/if_team.h
@@ -0,0 +1,107 @@
+/*
+ * include/linux/if_team.h - Network team device driver header
+ * Copyright (c) 2011 Jiri Pirko <jpirko@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _UAPI_LINUX_IF_TEAM_H_
+#define _UAPI_LINUX_IF_TEAM_H_
+
+
+#define TEAM_STRING_MAX_LEN 32
+
+/**********************************
+ * NETLINK_GENERIC netlink family.
+ **********************************/
+
+enum {
+	TEAM_CMD_NOOP,
+	TEAM_CMD_OPTIONS_SET,
+	TEAM_CMD_OPTIONS_GET,
+	TEAM_CMD_PORT_LIST_GET,
+
+	__TEAM_CMD_MAX,
+	TEAM_CMD_MAX = (__TEAM_CMD_MAX - 1),
+};
+
+enum {
+	TEAM_ATTR_UNSPEC,
+	TEAM_ATTR_TEAM_IFINDEX,		/* u32 */
+	TEAM_ATTR_LIST_OPTION,		/* nest */
+	TEAM_ATTR_LIST_PORT,		/* nest */
+
+	__TEAM_ATTR_MAX,
+	TEAM_ATTR_MAX = __TEAM_ATTR_MAX - 1,
+};
+
+/* Nested layout of get/set msg:
+ *
+ *	[TEAM_ATTR_LIST_OPTION]
+ *		[TEAM_ATTR_ITEM_OPTION]
+ *			[TEAM_ATTR_OPTION_*], ...
+ *		[TEAM_ATTR_ITEM_OPTION]
+ *			[TEAM_ATTR_OPTION_*], ...
+ *		...
+ *	[TEAM_ATTR_LIST_PORT]
+ *		[TEAM_ATTR_ITEM_PORT]
+ *			[TEAM_ATTR_PORT_*], ...
+ *		[TEAM_ATTR_ITEM_PORT]
+ *			[TEAM_ATTR_PORT_*], ...
+ *		...
+ */
+
+enum {
+	TEAM_ATTR_ITEM_OPTION_UNSPEC,
+	TEAM_ATTR_ITEM_OPTION,		/* nest */
+
+	__TEAM_ATTR_ITEM_OPTION_MAX,
+	TEAM_ATTR_ITEM_OPTION_MAX = __TEAM_ATTR_ITEM_OPTION_MAX - 1,
+};
+
+enum {
+	TEAM_ATTR_OPTION_UNSPEC,
+	TEAM_ATTR_OPTION_NAME,		/* string */
+	TEAM_ATTR_OPTION_CHANGED,	/* flag */
+	TEAM_ATTR_OPTION_TYPE,		/* u8 */
+	TEAM_ATTR_OPTION_DATA,		/* dynamic */
+	TEAM_ATTR_OPTION_REMOVED,	/* flag */
+	TEAM_ATTR_OPTION_PORT_IFINDEX,	/* u32 */ /* for per-port options */
+	TEAM_ATTR_OPTION_ARRAY_INDEX,	/* u32 */ /* for array options */
+
+	__TEAM_ATTR_OPTION_MAX,
+	TEAM_ATTR_OPTION_MAX = __TEAM_ATTR_OPTION_MAX - 1,
+};
+
+enum {
+	TEAM_ATTR_ITEM_PORT_UNSPEC,
+	TEAM_ATTR_ITEM_PORT,		/* nest */
+
+	__TEAM_ATTR_ITEM_PORT_MAX,
+	TEAM_ATTR_ITEM_PORT_MAX = __TEAM_ATTR_ITEM_PORT_MAX - 1,
+};
+
+enum {
+	TEAM_ATTR_PORT_UNSPEC,
+	TEAM_ATTR_PORT_IFINDEX,		/* u32 */
+	TEAM_ATTR_PORT_CHANGED,		/* flag */
+	TEAM_ATTR_PORT_LINKUP,		/* flag */
+	TEAM_ATTR_PORT_SPEED,		/* u32 */
+	TEAM_ATTR_PORT_DUPLEX,		/* u8 */
+	TEAM_ATTR_PORT_REMOVED,		/* flag */
+
+	__TEAM_ATTR_PORT_MAX,
+	TEAM_ATTR_PORT_MAX = __TEAM_ATTR_PORT_MAX - 1,
+};
+
+/*
+ * NETLINK_GENERIC related info
+ */
+#define TEAM_GENL_NAME "team"
+#define TEAM_GENL_VERSION 0x1
+#define TEAM_GENL_CHANGE_EVENT_MC_GRP_NAME "change_event"
+
+#endif /* _UAPI_LINUX_IF_TEAM_H_ */
diff --git a/include/uapi/linux/if_tun.h b/include/uapi/linux/if_tun.h
new file mode 100644
index 00000000000..25a585ce23e
--- /dev/null
+++ b/include/uapi/linux/if_tun.h
@@ -0,0 +1,94 @@
+/*
+ *  Universal TUN/TAP device driver.
+ *  Copyright (C) 1999-2000 Maxim Krasnyansky <max_mk@yahoo.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *  GNU General Public License for more details.
+ */
+
+#ifndef _UAPI__IF_TUN_H
+#define _UAPI__IF_TUN_H
+
+#include <linux/types.h>
+#include <linux/if_ether.h>
+#include <linux/filter.h>
+
+/* Read queue size */
+#define TUN_READQ_SIZE	500
+
+/* TUN device flags */
+#define TUN_TUN_DEV 	0x0001	
+#define TUN_TAP_DEV	0x0002
+#define TUN_TYPE_MASK   0x000f
+
+#define TUN_FASYNC	0x0010
+#define TUN_NOCHECKSUM	0x0020
+#define TUN_NO_PI	0x0040
+#define TUN_ONE_QUEUE	0x0080
+#define TUN_PERSIST 	0x0100	
+#define TUN_VNET_HDR 	0x0200
+
+/* Ioctl defines */
+#define TUNSETNOCSUM  _IOW('T', 200, int) 
+#define TUNSETDEBUG   _IOW('T', 201, int) 
+#define TUNSETIFF     _IOW('T', 202, int) 
+#define TUNSETPERSIST _IOW('T', 203, int) 
+#define TUNSETOWNER   _IOW('T', 204, int)
+#define TUNSETLINK    _IOW('T', 205, int)
+#define TUNSETGROUP   _IOW('T', 206, int)
+#define TUNGETFEATURES _IOR('T', 207, unsigned int)
+#define TUNSETOFFLOAD  _IOW('T', 208, unsigned int)
+#define TUNSETTXFILTER _IOW('T', 209, unsigned int)
+#define TUNGETIFF      _IOR('T', 210, unsigned int)
+#define TUNGETSNDBUF   _IOR('T', 211, int)
+#define TUNSETSNDBUF   _IOW('T', 212, int)
+#define TUNATTACHFILTER _IOW('T', 213, struct sock_fprog)
+#define TUNDETACHFILTER _IOW('T', 214, struct sock_fprog)
+#define TUNGETVNETHDRSZ _IOR('T', 215, int)
+#define TUNSETVNETHDRSZ _IOW('T', 216, int)
+
+/* TUNSETIFF ifr flags */
+#define IFF_TUN		0x0001
+#define IFF_TAP		0x0002
+#define IFF_NO_PI	0x1000
+#define IFF_ONE_QUEUE	0x2000
+#define IFF_VNET_HDR	0x4000
+#define IFF_TUN_EXCL	0x8000
+
+/* Features for GSO (TUNSETOFFLOAD). */
+#define TUN_F_CSUM	0x01	/* You can hand me unchecksummed packets. */
+#define TUN_F_TSO4	0x02	/* I can handle TSO for IPv4 packets */
+#define TUN_F_TSO6	0x04	/* I can handle TSO for IPv6 packets */
+#define TUN_F_TSO_ECN	0x08	/* I can handle TSO with ECN bits. */
+#define TUN_F_UFO	0x10	/* I can handle UFO packets */
+
+/* Protocol info prepended to the packets (when IFF_NO_PI is not set) */
+#define TUN_PKT_STRIP	0x0001
+struct tun_pi {
+	__u16  flags;
+	__be16 proto;
+};
+
+/*
+ * Filter spec (used for SETXXFILTER ioctls)
+ * This stuff is applicable only to the TAP (Ethernet) devices.
+ * If the count is zero the filter is disabled and the driver accepts
+ * all packets (promisc mode).
+ * If the filter is enabled in order to accept broadcast packets
+ * broadcast addr must be explicitly included in the addr list.
+ */
+#define TUN_FLT_ALLMULTI 0x0001 /* Accept all multicast packets */
+struct tun_filter {
+	__u16  flags; /* TUN_FLT_ flags see above */
+	__u16  count; /* Number of addresses */
+	__u8   addr[0][ETH_ALEN];
+};
+
+#endif /* _UAPI__IF_TUN_H */
diff --git a/include/uapi/linux/if_tunnel.h b/include/uapi/linux/if_tunnel.h
new file mode 100644
index 00000000000..5db5942575f
--- /dev/null
+++ b/include/uapi/linux/if_tunnel.h
@@ -0,0 +1,96 @@
+#ifndef _UAPI_IF_TUNNEL_H_
+#define _UAPI_IF_TUNNEL_H_
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+
+#define SIOCGETTUNNEL   (SIOCDEVPRIVATE + 0)
+#define SIOCADDTUNNEL   (SIOCDEVPRIVATE + 1)
+#define SIOCDELTUNNEL   (SIOCDEVPRIVATE + 2)
+#define SIOCCHGTUNNEL   (SIOCDEVPRIVATE + 3)
+#define SIOCGETPRL      (SIOCDEVPRIVATE + 4)
+#define SIOCADDPRL      (SIOCDEVPRIVATE + 5)
+#define SIOCDELPRL      (SIOCDEVPRIVATE + 6)
+#define SIOCCHGPRL      (SIOCDEVPRIVATE + 7)
+#define SIOCGET6RD      (SIOCDEVPRIVATE + 8)
+#define SIOCADD6RD      (SIOCDEVPRIVATE + 9)
+#define SIOCDEL6RD      (SIOCDEVPRIVATE + 10)
+#define SIOCCHG6RD      (SIOCDEVPRIVATE + 11)
+
+#define GRE_CSUM	__cpu_to_be16(0x8000)
+#define GRE_ROUTING	__cpu_to_be16(0x4000)
+#define GRE_KEY		__cpu_to_be16(0x2000)
+#define GRE_SEQ		__cpu_to_be16(0x1000)
+#define GRE_STRICT	__cpu_to_be16(0x0800)
+#define GRE_REC		__cpu_to_be16(0x0700)
+#define GRE_FLAGS	__cpu_to_be16(0x00F8)
+#define GRE_VERSION	__cpu_to_be16(0x0007)
+
+struct ip_tunnel_parm {
+	char			name[IFNAMSIZ];
+	int			link;
+	__be16			i_flags;
+	__be16			o_flags;
+	__be32			i_key;
+	__be32			o_key;
+	struct iphdr		iph;
+};
+
+/* SIT-mode i_flags */
+#define	SIT_ISATAP	0x0001
+
+struct ip_tunnel_prl {
+	__be32			addr;
+	__u16			flags;
+	__u16			__reserved;
+	__u32			datalen;
+	__u32			__reserved2;
+	/* data follows */
+};
+
+/* PRL flags */
+#define	PRL_DEFAULT		0x0001
+
+struct ip_tunnel_6rd {
+	struct in6_addr		prefix;
+	__be32			relay_prefix;
+	__u16			prefixlen;
+	__u16			relay_prefixlen;
+};
+
+enum {
+	IFLA_GRE_UNSPEC,
+	IFLA_GRE_LINK,
+	IFLA_GRE_IFLAGS,
+	IFLA_GRE_OFLAGS,
+	IFLA_GRE_IKEY,
+	IFLA_GRE_OKEY,
+	IFLA_GRE_LOCAL,
+	IFLA_GRE_REMOTE,
+	IFLA_GRE_TTL,
+	IFLA_GRE_TOS,
+	IFLA_GRE_PMTUDISC,
+	IFLA_GRE_ENCAP_LIMIT,
+	IFLA_GRE_FLOWINFO,
+	IFLA_GRE_FLAGS,
+	__IFLA_GRE_MAX,
+};
+
+#define IFLA_GRE_MAX	(__IFLA_GRE_MAX - 1)
+
+/* VTI-mode i_flags */
+#define VTI_ISVTI 0x0001
+
+enum {
+	IFLA_VTI_UNSPEC,
+	IFLA_VTI_LINK,
+	IFLA_VTI_IKEY,
+	IFLA_VTI_OKEY,
+	IFLA_VTI_LOCAL,
+	IFLA_VTI_REMOTE,
+	__IFLA_VTI_MAX,
+};
+
+#define IFLA_VTI_MAX	(__IFLA_VTI_MAX - 1)
+#endif /* _UAPI_IF_TUNNEL_H_ */
diff --git a/include/uapi/linux/if_vlan.h b/include/uapi/linux/if_vlan.h
new file mode 100644
index 00000000000..0744f8e65d1
--- /dev/null
+++ b/include/uapi/linux/if_vlan.h
@@ -0,0 +1,63 @@
+/*
+ * VLAN		An implementation of 802.1Q VLAN tagging.
+ *
+ * Authors:	Ben Greear <greearb@candelatech.com>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ */
+
+#ifndef _UAPI_LINUX_IF_VLAN_H_
+#define _UAPI_LINUX_IF_VLAN_H_
+
+
+/* VLAN IOCTLs are found in sockios.h */
+
+/* Passed in vlan_ioctl_args structure to determine behaviour. */
+enum vlan_ioctl_cmds {
+	ADD_VLAN_CMD,
+	DEL_VLAN_CMD,
+	SET_VLAN_INGRESS_PRIORITY_CMD,
+	SET_VLAN_EGRESS_PRIORITY_CMD,
+	GET_VLAN_INGRESS_PRIORITY_CMD,
+	GET_VLAN_EGRESS_PRIORITY_CMD,
+	SET_VLAN_NAME_TYPE_CMD,
+	SET_VLAN_FLAG_CMD,
+	GET_VLAN_REALDEV_NAME_CMD, /* If this works, you know it's a VLAN device, btw */
+	GET_VLAN_VID_CMD /* Get the VID of this VLAN (specified by name) */
+};
+
+enum vlan_flags {
+	VLAN_FLAG_REORDER_HDR	= 0x1,
+	VLAN_FLAG_GVRP		= 0x2,
+	VLAN_FLAG_LOOSE_BINDING	= 0x4,
+};
+
+enum vlan_name_types {
+	VLAN_NAME_TYPE_PLUS_VID, /* Name will look like:  vlan0005 */
+	VLAN_NAME_TYPE_RAW_PLUS_VID, /* name will look like:  eth1.0005 */
+	VLAN_NAME_TYPE_PLUS_VID_NO_PAD, /* Name will look like:  vlan5 */
+	VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD, /* Name will look like:  eth0.5 */
+	VLAN_NAME_TYPE_HIGHEST
+};
+
+struct vlan_ioctl_args {
+	int cmd; /* Should be one of the vlan_ioctl_cmds enum above. */
+	char device1[24];
+
+        union {
+		char device2[24];
+		int VID;
+		unsigned int skb_priority;
+		unsigned int name_type;
+		unsigned int bind_type;
+		unsigned int flag; /* Matches vlan_dev_priv flags */
+        } u;
+
+	short vlan_qos;   
+};
+
+#endif /* _UAPI_LINUX_IF_VLAN_H_ */
diff --git a/include/uapi/linux/if_x25.h b/include/uapi/linux/if_x25.h
new file mode 100644
index 00000000000..897765f5feb
--- /dev/null
+++ b/include/uapi/linux/if_x25.h
@@ -0,0 +1,26 @@
+/*
+ *  Linux X.25 packet to device interface
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *  GNU General Public License for more details.
+ */
+
+#ifndef _IF_X25_H
+#define _IF_X25_H
+
+#include <linux/types.h>
+
+/* Documentation/networking/x25-iface.txt */
+#define X25_IFACE_DATA		0x00
+#define X25_IFACE_CONNECT	0x01
+#define X25_IFACE_DISCONNECT	0x02
+#define X25_IFACE_PARAMS	0x03
+
+#endif /* _IF_X25_H */
diff --git a/include/uapi/linux/igmp.h b/include/uapi/linux/igmp.h
new file mode 100644
index 00000000000..ccbb32aa670
--- /dev/null
+++ b/include/uapi/linux/igmp.h
@@ -0,0 +1,128 @@
+/*
+ *	Linux NET3:	Internet Group Management Protocol  [IGMP]
+ *
+ *	Authors:
+ *		Alan Cox <alan@lxorguk.ukuu.org.uk>
+ *
+ *	Extended to talk the BSD extended IGMP protocol of mrouted 3.6
+ *
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _UAPI_LINUX_IGMP_H
+#define _UAPI_LINUX_IGMP_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+/*
+ *	IGMP protocol structures
+ */
+
+/*
+ *	Header in on cable format
+ */
+
+struct igmphdr {
+	__u8 type;
+	__u8 code;		/* For newer IGMP */
+	__sum16 csum;
+	__be32 group;
+};
+
+/* V3 group record types [grec_type] */
+#define IGMPV3_MODE_IS_INCLUDE		1
+#define IGMPV3_MODE_IS_EXCLUDE		2
+#define IGMPV3_CHANGE_TO_INCLUDE	3
+#define IGMPV3_CHANGE_TO_EXCLUDE	4
+#define IGMPV3_ALLOW_NEW_SOURCES	5
+#define IGMPV3_BLOCK_OLD_SOURCES	6
+
+struct igmpv3_grec {
+	__u8	grec_type;
+	__u8	grec_auxwords;
+	__be16	grec_nsrcs;
+	__be32	grec_mca;
+	__be32	grec_src[0];
+};
+
+struct igmpv3_report {
+	__u8 type;
+	__u8 resv1;
+	__be16 csum;
+	__be16 resv2;
+	__be16 ngrec;
+	struct igmpv3_grec grec[0];
+};
+
+struct igmpv3_query {
+	__u8 type;
+	__u8 code;
+	__be16 csum;
+	__be32 group;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 qrv:3,
+	     suppress:1,
+	     resv:4;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	__u8 resv:4,
+	     suppress:1,
+	     qrv:3;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+	__u8 qqic;
+	__be16 nsrcs;
+	__be32 srcs[0];
+};
+
+#define IGMP_HOST_MEMBERSHIP_QUERY	0x11	/* From RFC1112 */
+#define IGMP_HOST_MEMBERSHIP_REPORT	0x12	/* Ditto */
+#define IGMP_DVMRP			0x13	/* DVMRP routing */
+#define IGMP_PIM			0x14	/* PIM routing */
+#define IGMP_TRACE			0x15
+#define IGMPV2_HOST_MEMBERSHIP_REPORT	0x16	/* V2 version of 0x12 */
+#define IGMP_HOST_LEAVE_MESSAGE 	0x17
+#define IGMPV3_HOST_MEMBERSHIP_REPORT	0x22	/* V3 version of 0x12 */
+
+#define IGMP_MTRACE_RESP		0x1e
+#define IGMP_MTRACE			0x1f
+
+
+/*
+ *	Use the BSD names for these for compatibility
+ */
+
+#define IGMP_DELAYING_MEMBER		0x01
+#define IGMP_IDLE_MEMBER		0x02
+#define IGMP_LAZY_MEMBER		0x03
+#define IGMP_SLEEPING_MEMBER		0x04
+#define IGMP_AWAKENING_MEMBER		0x05
+
+#define IGMP_MINLEN			8
+
+#define IGMP_MAX_HOST_REPORT_DELAY	10	/* max delay for response to */
+						/* query (in seconds)	*/
+
+#define IGMP_TIMER_SCALE		10	/* denotes that the igmphdr->timer field */
+						/* specifies time in 10th of seconds	 */
+
+#define IGMP_AGE_THRESHOLD		400	/* If this host don't hear any IGMP V1	*/
+						/* message in this period of time,	*/
+						/* revert to IGMP v2 router.		*/
+
+#define IGMP_ALL_HOSTS		htonl(0xE0000001L)
+#define IGMP_ALL_ROUTER 	htonl(0xE0000002L)
+#define IGMPV3_ALL_MCR	 	htonl(0xE0000016L)
+#define IGMP_LOCAL_GROUP	htonl(0xE0000000L)
+#define IGMP_LOCAL_GROUP_MASK	htonl(0xFFFFFF00L)
+
+/*
+ * struct for keeping the multicast list in
+ */
+
+#endif /* _UAPI_LINUX_IGMP_H */
diff --git a/include/uapi/linux/in.h b/include/uapi/linux/in.h
new file mode 100644
index 00000000000..9edb441df82
--- /dev/null
+++ b/include/uapi/linux/in.h
@@ -0,0 +1,253 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions of the Internet Protocol.
+ *
+ * Version:	@(#)in.h	1.0.1	04/21/93
+ *
+ * Authors:	Original taken from the GNU Project <netinet/in.h> file.
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_LINUX_IN_H
+#define _UAPI_LINUX_IN_H
+
+#include <linux/types.h>
+#include <linux/socket.h>
+
+/* Standard well-defined IP protocols.  */
+enum {
+  IPPROTO_IP = 0,		/* Dummy protocol for TCP		*/
+  IPPROTO_ICMP = 1,		/* Internet Control Message Protocol	*/
+  IPPROTO_IGMP = 2,		/* Internet Group Management Protocol	*/
+  IPPROTO_IPIP = 4,		/* IPIP tunnels (older KA9Q tunnels use 94) */
+  IPPROTO_TCP = 6,		/* Transmission Control Protocol	*/
+  IPPROTO_EGP = 8,		/* Exterior Gateway Protocol		*/
+  IPPROTO_PUP = 12,		/* PUP protocol				*/
+  IPPROTO_UDP = 17,		/* User Datagram Protocol		*/
+  IPPROTO_IDP = 22,		/* XNS IDP protocol			*/
+  IPPROTO_DCCP = 33,		/* Datagram Congestion Control Protocol */
+  IPPROTO_RSVP = 46,		/* RSVP protocol			*/
+  IPPROTO_GRE = 47,		/* Cisco GRE tunnels (rfc 1701,1702)	*/
+
+  IPPROTO_IPV6	 = 41,		/* IPv6-in-IPv4 tunnelling		*/
+
+  IPPROTO_ESP = 50,            /* Encapsulation Security Payload protocol */
+  IPPROTO_AH = 51,             /* Authentication Header protocol       */
+  IPPROTO_BEETPH = 94,	       /* IP option pseudo header for BEET */
+  IPPROTO_PIM    = 103,		/* Protocol Independent Multicast	*/
+
+  IPPROTO_COMP   = 108,                /* Compression Header protocol */
+  IPPROTO_SCTP   = 132,		/* Stream Control Transport Protocol	*/
+  IPPROTO_UDPLITE = 136,	/* UDP-Lite (RFC 3828)			*/
+
+  IPPROTO_RAW	 = 255,		/* Raw IP packets			*/
+  IPPROTO_MAX
+};
+
+
+/* Internet address. */
+struct in_addr {
+	__be32	s_addr;
+};
+
+#define IP_TOS		1
+#define IP_TTL		2
+#define IP_HDRINCL	3
+#define IP_OPTIONS	4
+#define IP_ROUTER_ALERT	5
+#define IP_RECVOPTS	6
+#define IP_RETOPTS	7
+#define IP_PKTINFO	8
+#define IP_PKTOPTIONS	9
+#define IP_MTU_DISCOVER	10
+#define IP_RECVERR	11
+#define IP_RECVTTL	12
+#define	IP_RECVTOS	13
+#define IP_MTU		14
+#define IP_FREEBIND	15
+#define IP_IPSEC_POLICY	16
+#define IP_XFRM_POLICY	17
+#define IP_PASSSEC	18
+#define IP_TRANSPARENT	19
+
+/* BSD compatibility */
+#define IP_RECVRETOPTS	IP_RETOPTS
+
+/* TProxy original addresses */
+#define IP_ORIGDSTADDR       20
+#define IP_RECVORIGDSTADDR   IP_ORIGDSTADDR
+
+#define IP_MINTTL       21
+#define IP_NODEFRAG     22
+
+/* IP_MTU_DISCOVER values */
+#define IP_PMTUDISC_DONT		0	/* Never send DF frames */
+#define IP_PMTUDISC_WANT		1	/* Use per route hints	*/
+#define IP_PMTUDISC_DO			2	/* Always DF		*/
+#define IP_PMTUDISC_PROBE		3       /* Ignore dst pmtu      */
+
+#define IP_MULTICAST_IF			32
+#define IP_MULTICAST_TTL 		33
+#define IP_MULTICAST_LOOP 		34
+#define IP_ADD_MEMBERSHIP		35
+#define IP_DROP_MEMBERSHIP		36
+#define IP_UNBLOCK_SOURCE		37
+#define IP_BLOCK_SOURCE			38
+#define IP_ADD_SOURCE_MEMBERSHIP	39
+#define IP_DROP_SOURCE_MEMBERSHIP	40
+#define IP_MSFILTER			41
+#define MCAST_JOIN_GROUP		42
+#define MCAST_BLOCK_SOURCE		43
+#define MCAST_UNBLOCK_SOURCE		44
+#define MCAST_LEAVE_GROUP		45
+#define MCAST_JOIN_SOURCE_GROUP		46
+#define MCAST_LEAVE_SOURCE_GROUP	47
+#define MCAST_MSFILTER			48
+#define IP_MULTICAST_ALL		49
+#define IP_UNICAST_IF			50
+
+#define MCAST_EXCLUDE	0
+#define MCAST_INCLUDE	1
+
+/* These need to appear somewhere around here */
+#define IP_DEFAULT_MULTICAST_TTL        1
+#define IP_DEFAULT_MULTICAST_LOOP       1
+
+/* Request struct for multicast socket ops */
+
+struct ip_mreq  {
+	struct in_addr imr_multiaddr;	/* IP multicast address of group */
+	struct in_addr imr_interface;	/* local IP address of interface */
+};
+
+struct ip_mreqn {
+	struct in_addr	imr_multiaddr;		/* IP multicast address of group */
+	struct in_addr	imr_address;		/* local IP address of interface */
+	int		imr_ifindex;		/* Interface index */
+};
+
+struct ip_mreq_source {
+	__be32		imr_multiaddr;
+	__be32		imr_interface;
+	__be32		imr_sourceaddr;
+};
+
+struct ip_msfilter {
+	__be32		imsf_multiaddr;
+	__be32		imsf_interface;
+	__u32		imsf_fmode;
+	__u32		imsf_numsrc;
+	__be32		imsf_slist[1];
+};
+
+#define IP_MSFILTER_SIZE(numsrc) \
+	(sizeof(struct ip_msfilter) - sizeof(__u32) \
+	+ (numsrc) * sizeof(__u32))
+
+struct group_req {
+	__u32				 gr_interface;	/* interface index */
+	struct __kernel_sockaddr_storage gr_group;	/* group address */
+};
+
+struct group_source_req {
+	__u32				 gsr_interface;	/* interface index */
+	struct __kernel_sockaddr_storage gsr_group;	/* group address */
+	struct __kernel_sockaddr_storage gsr_source;	/* source address */
+};
+
+struct group_filter {
+	__u32				 gf_interface;	/* interface index */
+	struct __kernel_sockaddr_storage gf_group;	/* multicast address */
+	__u32				 gf_fmode;	/* filter mode */
+	__u32				 gf_numsrc;	/* number of sources */
+	struct __kernel_sockaddr_storage gf_slist[1];	/* interface index */
+};
+
+#define GROUP_FILTER_SIZE(numsrc) \
+	(sizeof(struct group_filter) - sizeof(struct __kernel_sockaddr_storage) \
+	+ (numsrc) * sizeof(struct __kernel_sockaddr_storage))
+
+struct in_pktinfo {
+	int		ipi_ifindex;
+	struct in_addr	ipi_spec_dst;
+	struct in_addr	ipi_addr;
+};
+
+/* Structure describing an Internet (IP) socket address. */
+#define __SOCK_SIZE__	16		/* sizeof(struct sockaddr)	*/
+struct sockaddr_in {
+  __kernel_sa_family_t	sin_family;	/* Address family		*/
+  __be16		sin_port;	/* Port number			*/
+  struct in_addr	sin_addr;	/* Internet address		*/
+
+  /* Pad to size of `struct sockaddr'. */
+  unsigned char		__pad[__SOCK_SIZE__ - sizeof(short int) -
+			sizeof(unsigned short int) - sizeof(struct in_addr)];
+};
+#define sin_zero	__pad		/* for BSD UNIX comp. -FvK	*/
+
+
+/*
+ * Definitions of the bits in an Internet address integer.
+ * On subnets, host and network parts are found according
+ * to the subnet mask, not these masks.
+ */
+#define	IN_CLASSA(a)		((((long int) (a)) & 0x80000000) == 0)
+#define	IN_CLASSA_NET		0xff000000
+#define	IN_CLASSA_NSHIFT	24
+#define	IN_CLASSA_HOST		(0xffffffff & ~IN_CLASSA_NET)
+#define	IN_CLASSA_MAX		128
+
+#define	IN_CLASSB(a)		((((long int) (a)) & 0xc0000000) == 0x80000000)
+#define	IN_CLASSB_NET		0xffff0000
+#define	IN_CLASSB_NSHIFT	16
+#define	IN_CLASSB_HOST		(0xffffffff & ~IN_CLASSB_NET)
+#define	IN_CLASSB_MAX		65536
+
+#define	IN_CLASSC(a)		((((long int) (a)) & 0xe0000000) == 0xc0000000)
+#define	IN_CLASSC_NET		0xffffff00
+#define	IN_CLASSC_NSHIFT	8
+#define	IN_CLASSC_HOST		(0xffffffff & ~IN_CLASSC_NET)
+
+#define	IN_CLASSD(a)		((((long int) (a)) & 0xf0000000) == 0xe0000000)
+#define	IN_MULTICAST(a)		IN_CLASSD(a)
+#define IN_MULTICAST_NET	0xF0000000
+
+#define	IN_EXPERIMENTAL(a)	((((long int) (a)) & 0xf0000000) == 0xf0000000)
+#define	IN_BADCLASS(a)		IN_EXPERIMENTAL((a))
+
+/* Address to accept any incoming messages. */
+#define	INADDR_ANY		((unsigned long int) 0x00000000)
+
+/* Address to send to all hosts. */
+#define	INADDR_BROADCAST	((unsigned long int) 0xffffffff)
+
+/* Address indicating an error return. */
+#define	INADDR_NONE		((unsigned long int) 0xffffffff)
+
+/* Network number for local host loopback. */
+#define	IN_LOOPBACKNET		127
+
+/* Address to loopback in software to local host.  */
+#define	INADDR_LOOPBACK		0x7f000001	/* 127.0.0.1   */
+#define	IN_LOOPBACK(a)		((((long int) (a)) & 0xff000000) == 0x7f000000)
+
+/* Defines for Multicast INADDR */
+#define INADDR_UNSPEC_GROUP   	0xe0000000U	/* 224.0.0.0   */
+#define INADDR_ALLHOSTS_GROUP 	0xe0000001U	/* 224.0.0.1   */
+#define INADDR_ALLRTRS_GROUP    0xe0000002U	/* 224.0.0.2 */
+#define INADDR_MAX_LOCAL_GROUP  0xe00000ffU	/* 224.0.0.255 */
+
+
+/* <asm/byteorder.h> contains the htonl type stuff.. */
+#include <asm/byteorder.h> 
+
+
+#endif /* _UAPI_LINUX_IN_H */
diff --git a/include/uapi/linux/in6.h b/include/uapi/linux/in6.h
new file mode 100644
index 00000000000..1e315998995
--- /dev/null
+++ b/include/uapi/linux/in6.h
@@ -0,0 +1,279 @@
+/*
+ *	Types and definitions for AF_INET6 
+ *	Linux INET6 implementation 
+ *
+ *	Authors:
+ *	Pedro Roque		<roque@di.fc.ul.pt>	
+ *
+ *	Sources:
+ *	IPv6 Program Interfaces for BSD Systems
+ *      <draft-ietf-ipngwg-bsd-api-05.txt>
+ *
+ *	Advanced Sockets API for IPv6
+ *	<draft-stevens-advanced-api-00.txt>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _UAPI_LINUX_IN6_H
+#define _UAPI_LINUX_IN6_H
+
+#include <linux/types.h>
+
+/*
+ *	IPv6 address structure
+ */
+
+struct in6_addr {
+	union {
+		__u8		u6_addr8[16];
+		__be16		u6_addr16[8];
+		__be32		u6_addr32[4];
+	} in6_u;
+#define s6_addr			in6_u.u6_addr8
+#define s6_addr16		in6_u.u6_addr16
+#define s6_addr32		in6_u.u6_addr32
+};
+
+/* IPv6 Wildcard Address (::) and Loopback Address (::1) defined in RFC2553
+ * NOTE: Be aware the IN6ADDR_* constants and in6addr_* externals are defined
+ * in network byte order, not in host byte order as are the IPv4 equivalents
+ */
+
+struct sockaddr_in6 {
+	unsigned short int	sin6_family;    /* AF_INET6 */
+	__be16			sin6_port;      /* Transport layer port # */
+	__be32			sin6_flowinfo;  /* IPv6 flow information */
+	struct in6_addr		sin6_addr;      /* IPv6 address */
+	__u32			sin6_scope_id;  /* scope id (new in RFC2553) */
+};
+
+struct ipv6_mreq {
+	/* IPv6 multicast address of group */
+	struct in6_addr ipv6mr_multiaddr;
+
+	/* local IPv6 address of interface */
+	int		ipv6mr_ifindex;
+};
+
+#define ipv6mr_acaddr	ipv6mr_multiaddr
+
+struct in6_flowlabel_req {
+	struct in6_addr	flr_dst;
+	__be32	flr_label;
+	__u8	flr_action;
+	__u8	flr_share;
+	__u16	flr_flags;
+	__u16 	flr_expires;
+	__u16	flr_linger;
+	__u32	__flr_pad;
+	/* Options in format of IPV6_PKTOPTIONS */
+};
+
+#define IPV6_FL_A_GET	0
+#define IPV6_FL_A_PUT	1
+#define IPV6_FL_A_RENEW	2
+
+#define IPV6_FL_F_CREATE	1
+#define IPV6_FL_F_EXCL		2
+
+#define IPV6_FL_S_NONE		0
+#define IPV6_FL_S_EXCL		1
+#define IPV6_FL_S_PROCESS	2
+#define IPV6_FL_S_USER		3
+#define IPV6_FL_S_ANY		255
+
+
+/*
+ *	Bitmask constant declarations to help applications select out the 
+ *	flow label and priority fields.
+ *
+ *	Note that this are in host byte order while the flowinfo field of
+ *	sockaddr_in6 is in network byte order.
+ */
+
+#define IPV6_FLOWINFO_FLOWLABEL		0x000fffff
+#define IPV6_FLOWINFO_PRIORITY		0x0ff00000
+
+/* These definitions are obsolete */
+#define IPV6_PRIORITY_UNCHARACTERIZED	0x0000
+#define IPV6_PRIORITY_FILLER		0x0100
+#define IPV6_PRIORITY_UNATTENDED	0x0200
+#define IPV6_PRIORITY_RESERVED1		0x0300
+#define IPV6_PRIORITY_BULK		0x0400
+#define IPV6_PRIORITY_RESERVED2		0x0500
+#define IPV6_PRIORITY_INTERACTIVE	0x0600
+#define IPV6_PRIORITY_CONTROL		0x0700
+#define IPV6_PRIORITY_8			0x0800
+#define IPV6_PRIORITY_9			0x0900
+#define IPV6_PRIORITY_10		0x0a00
+#define IPV6_PRIORITY_11		0x0b00
+#define IPV6_PRIORITY_12		0x0c00
+#define IPV6_PRIORITY_13		0x0d00
+#define IPV6_PRIORITY_14		0x0e00
+#define IPV6_PRIORITY_15		0x0f00
+
+/*
+ *	IPV6 extension headers
+ */
+#define IPPROTO_HOPOPTS		0	/* IPv6 hop-by-hop options	*/
+#define IPPROTO_ROUTING		43	/* IPv6 routing header		*/
+#define IPPROTO_FRAGMENT	44	/* IPv6 fragmentation header	*/
+#define IPPROTO_ICMPV6		58	/* ICMPv6			*/
+#define IPPROTO_NONE		59	/* IPv6 no next header		*/
+#define IPPROTO_DSTOPTS		60	/* IPv6 destination options	*/
+#define IPPROTO_MH		135	/* IPv6 mobility header		*/
+
+/*
+ *	IPv6 TLV options.
+ */
+#define IPV6_TLV_PAD1		0
+#define IPV6_TLV_PADN		1
+#define IPV6_TLV_ROUTERALERT	5
+#define IPV6_TLV_JUMBO		194
+#define IPV6_TLV_HAO		201	/* home address option */
+
+/*
+ *	IPV6 socket options
+ */
+
+#define IPV6_ADDRFORM		1
+#define IPV6_2292PKTINFO	2
+#define IPV6_2292HOPOPTS	3
+#define IPV6_2292DSTOPTS	4
+#define IPV6_2292RTHDR		5
+#define IPV6_2292PKTOPTIONS	6
+#define IPV6_CHECKSUM		7
+#define IPV6_2292HOPLIMIT	8
+#define IPV6_NEXTHOP		9
+#define IPV6_AUTHHDR		10	/* obsolete */
+#define IPV6_FLOWINFO		11
+
+#define IPV6_UNICAST_HOPS	16
+#define IPV6_MULTICAST_IF	17
+#define IPV6_MULTICAST_HOPS	18
+#define IPV6_MULTICAST_LOOP	19
+#define IPV6_ADD_MEMBERSHIP	20
+#define IPV6_DROP_MEMBERSHIP	21
+#define IPV6_ROUTER_ALERT	22
+#define IPV6_MTU_DISCOVER	23
+#define IPV6_MTU		24
+#define IPV6_RECVERR		25
+#define IPV6_V6ONLY		26
+#define IPV6_JOIN_ANYCAST	27
+#define IPV6_LEAVE_ANYCAST	28
+
+/* IPV6_MTU_DISCOVER values */
+#define IPV6_PMTUDISC_DONT		0
+#define IPV6_PMTUDISC_WANT		1
+#define IPV6_PMTUDISC_DO		2
+#define IPV6_PMTUDISC_PROBE		3
+
+/* Flowlabel */
+#define IPV6_FLOWLABEL_MGR	32
+#define IPV6_FLOWINFO_SEND	33
+
+#define IPV6_IPSEC_POLICY	34
+#define IPV6_XFRM_POLICY	35
+
+/*
+ * Multicast:
+ * Following socket options are shared between IPv4 and IPv6.
+ *
+ * MCAST_JOIN_GROUP		42
+ * MCAST_BLOCK_SOURCE		43
+ * MCAST_UNBLOCK_SOURCE		44
+ * MCAST_LEAVE_GROUP		45
+ * MCAST_JOIN_SOURCE_GROUP	46
+ * MCAST_LEAVE_SOURCE_GROUP	47
+ * MCAST_MSFILTER		48
+ */
+
+/*
+ * Advanced API (RFC3542) (1)
+ *
+ * Note: IPV6_RECVRTHDRDSTOPTS does not exist. see net/ipv6/datagram.c.
+ */
+
+#define IPV6_RECVPKTINFO	49
+#define IPV6_PKTINFO		50
+#define IPV6_RECVHOPLIMIT	51
+#define IPV6_HOPLIMIT		52
+#define IPV6_RECVHOPOPTS	53
+#define IPV6_HOPOPTS		54
+#define IPV6_RTHDRDSTOPTS	55
+#define IPV6_RECVRTHDR		56
+#define IPV6_RTHDR		57
+#define IPV6_RECVDSTOPTS	58
+#define IPV6_DSTOPTS		59
+#define IPV6_RECVPATHMTU	60
+#define IPV6_PATHMTU		61
+#define IPV6_DONTFRAG		62
+#if 0	/* not yet */
+#define IPV6_USE_MIN_MTU	63
+#endif
+
+/*
+ * Netfilter (1)
+ *
+ * Following socket options are used in ip6_tables;
+ * see include/linux/netfilter_ipv6/ip6_tables.h.
+ *
+ * IP6T_SO_SET_REPLACE / IP6T_SO_GET_INFO		64
+ * IP6T_SO_SET_ADD_COUNTERS / IP6T_SO_GET_ENTRIES	65
+ */
+
+/*
+ * Advanced API (RFC3542) (2)
+ */
+#define IPV6_RECVTCLASS		66
+#define IPV6_TCLASS		67
+
+/*
+ * Netfilter (2)
+ *
+ * Following socket options are used in ip6_tables;
+ * see include/linux/netfilter_ipv6/ip6_tables.h.
+ *
+ * IP6T_SO_GET_REVISION_MATCH	68
+ * IP6T_SO_GET_REVISION_TARGET	69
+ */
+
+/* RFC5014: Source address selection */
+#define IPV6_ADDR_PREFERENCES	72
+
+#define IPV6_PREFER_SRC_TMP		0x0001
+#define IPV6_PREFER_SRC_PUBLIC		0x0002
+#define IPV6_PREFER_SRC_PUBTMP_DEFAULT	0x0100
+#define IPV6_PREFER_SRC_COA		0x0004
+#define IPV6_PREFER_SRC_HOME		0x0400
+#define IPV6_PREFER_SRC_CGA		0x0008
+#define IPV6_PREFER_SRC_NONCGA		0x0800
+
+/* RFC5082: Generalized Ttl Security Mechanism */
+#define IPV6_MINHOPCOUNT		73
+
+#define IPV6_ORIGDSTADDR        74
+#define IPV6_RECVORIGDSTADDR    IPV6_ORIGDSTADDR
+#define IPV6_TRANSPARENT        75
+#define IPV6_UNICAST_IF         76
+
+/*
+ * Multicast Routing:
+ * see include/linux/mroute6.h.
+ *
+ * MRT6_INIT			200
+ * MRT6_DONE			201
+ * MRT6_ADD_MIF			202
+ * MRT6_DEL_MIF			203
+ * MRT6_ADD_MFC			204
+ * MRT6_DEL_MFC			205
+ * MRT6_VERSION			206
+ * MRT6_ASSERT			207
+ * MRT6_PIM			208
+ * (reserved)			209
+ */
+#endif /* _UAPI_LINUX_IN6_H */
diff --git a/include/uapi/linux/in_route.h b/include/uapi/linux/in_route.h
new file mode 100644
index 00000000000..b261b8c915f
--- /dev/null
+++ b/include/uapi/linux/in_route.h
@@ -0,0 +1,32 @@
+#ifndef _LINUX_IN_ROUTE_H
+#define _LINUX_IN_ROUTE_H
+
+/* IPv4 routing cache flags */
+
+#define RTCF_DEAD	RTNH_F_DEAD
+#define RTCF_ONLINK	RTNH_F_ONLINK
+
+/* Obsolete flag. About to be deleted */
+#define RTCF_NOPMTUDISC RTM_F_NOPMTUDISC
+
+#define RTCF_NOTIFY	0x00010000
+#define RTCF_DIRECTDST	0x00020000 /* unused */
+#define RTCF_REDIRECTED	0x00040000
+#define RTCF_TPROXY	0x00080000 /* unused */
+
+#define RTCF_FAST	0x00200000 /* unused */
+#define RTCF_MASQ	0x00400000 /* unused */
+#define RTCF_SNAT	0x00800000 /* unused */
+#define RTCF_DOREDIRECT 0x01000000
+#define RTCF_DIRECTSRC	0x04000000
+#define RTCF_DNAT	0x08000000
+#define RTCF_BROADCAST	0x10000000
+#define RTCF_MULTICAST	0x20000000
+#define RTCF_REJECT	0x40000000 /* unused */
+#define RTCF_LOCAL	0x80000000
+
+#define RTCF_NAT	(RTCF_DNAT|RTCF_SNAT)
+
+#define RT_TOS(tos)	((tos)&IPTOS_TOS_MASK)
+
+#endif /* _LINUX_IN_ROUTE_H */
diff --git a/include/uapi/linux/inet_diag.h b/include/uapi/linux/inet_diag.h
new file mode 100644
index 00000000000..8c469af939a
--- /dev/null
+++ b/include/uapi/linux/inet_diag.h
@@ -0,0 +1,136 @@
+#ifndef _UAPI_INET_DIAG_H_
+#define _UAPI_INET_DIAG_H_
+
+#include <linux/types.h>
+
+/* Just some random number */
+#define TCPDIAG_GETSOCK 18
+#define DCCPDIAG_GETSOCK 19
+
+#define INET_DIAG_GETSOCK_MAX 24
+
+/* Socket identity */
+struct inet_diag_sockid {
+	__be16	idiag_sport;
+	__be16	idiag_dport;
+	__be32	idiag_src[4];
+	__be32	idiag_dst[4];
+	__u32	idiag_if;
+	__u32	idiag_cookie[2];
+#define INET_DIAG_NOCOOKIE (~0U)
+};
+
+/* Request structure */
+
+struct inet_diag_req {
+	__u8	idiag_family;		/* Family of addresses. */
+	__u8	idiag_src_len;
+	__u8	idiag_dst_len;
+	__u8	idiag_ext;		/* Query extended information */
+
+	struct inet_diag_sockid id;
+
+	__u32	idiag_states;		/* States to dump */
+	__u32	idiag_dbs;		/* Tables to dump (NI) */
+};
+
+struct inet_diag_req_v2 {
+	__u8	sdiag_family;
+	__u8	sdiag_protocol;
+	__u8	idiag_ext;
+	__u8	pad;
+	__u32	idiag_states;
+	struct inet_diag_sockid id;
+};
+
+enum {
+	INET_DIAG_REQ_NONE,
+	INET_DIAG_REQ_BYTECODE,
+};
+
+#define INET_DIAG_REQ_MAX INET_DIAG_REQ_BYTECODE
+
+/* Bytecode is sequence of 4 byte commands followed by variable arguments.
+ * All the commands identified by "code" are conditional jumps forward:
+ * to offset cc+"yes" or to offset cc+"no". "yes" is supposed to be
+ * length of the command and its arguments.
+ */
+ 
+struct inet_diag_bc_op {
+	unsigned char	code;
+	unsigned char	yes;
+	unsigned short	no;
+};
+
+enum {
+	INET_DIAG_BC_NOP,
+	INET_DIAG_BC_JMP,
+	INET_DIAG_BC_S_GE,
+	INET_DIAG_BC_S_LE,
+	INET_DIAG_BC_D_GE,
+	INET_DIAG_BC_D_LE,
+	INET_DIAG_BC_AUTO,
+	INET_DIAG_BC_S_COND,
+	INET_DIAG_BC_D_COND,
+};
+
+struct inet_diag_hostcond {
+	__u8	family;
+	__u8	prefix_len;
+	int	port;
+	__be32	addr[0];
+};
+
+/* Base info structure. It contains socket identity (addrs/ports/cookie)
+ * and, alas, the information shown by netstat. */
+struct inet_diag_msg {
+	__u8	idiag_family;
+	__u8	idiag_state;
+	__u8	idiag_timer;
+	__u8	idiag_retrans;
+
+	struct inet_diag_sockid id;
+
+	__u32	idiag_expires;
+	__u32	idiag_rqueue;
+	__u32	idiag_wqueue;
+	__u32	idiag_uid;
+	__u32	idiag_inode;
+};
+
+/* Extensions */
+
+enum {
+	INET_DIAG_NONE,
+	INET_DIAG_MEMINFO,
+	INET_DIAG_INFO,
+	INET_DIAG_VEGASINFO,
+	INET_DIAG_CONG,
+	INET_DIAG_TOS,
+	INET_DIAG_TCLASS,
+	INET_DIAG_SKMEMINFO,
+};
+
+#define INET_DIAG_MAX INET_DIAG_SKMEMINFO
+
+
+/* INET_DIAG_MEM */
+
+struct inet_diag_meminfo {
+	__u32	idiag_rmem;
+	__u32	idiag_wmem;
+	__u32	idiag_fmem;
+	__u32	idiag_tmem;
+};
+
+/* INET_DIAG_VEGASINFO */
+
+struct tcpvegas_info {
+	__u32	tcpv_enabled;
+	__u32	tcpv_rttcnt;
+	__u32	tcpv_rtt;
+	__u32	tcpv_minrtt;
+};
+
+
+#endif /* _UAPI_INET_DIAG_H_ */
diff --git a/include/uapi/linux/inotify.h b/include/uapi/linux/inotify.h
new file mode 100644
index 00000000000..e6bf35b2dd3
--- /dev/null
+++ b/include/uapi/linux/inotify.h
@@ -0,0 +1,74 @@
+/*
+ * Inode based directory notification for Linux
+ *
+ * Copyright (C) 2005 John McCutchan
+ */
+
+#ifndef _UAPI_LINUX_INOTIFY_H
+#define _UAPI_LINUX_INOTIFY_H
+
+/* For O_CLOEXEC and O_NONBLOCK */
+#include <linux/fcntl.h>
+#include <linux/types.h>
+
+/*
+ * struct inotify_event - structure read from the inotify device for each event
+ *
+ * When you are watching a directory, you will receive the filename for events
+ * such as IN_CREATE, IN_DELETE, IN_OPEN, IN_CLOSE, ..., relative to the wd.
+ */
+struct inotify_event {
+	__s32		wd;		/* watch descriptor */
+	__u32		mask;		/* watch mask */
+	__u32		cookie;		/* cookie to synchronize two events */
+	__u32		len;		/* length (including nulls) of name */
+	char		name[0];	/* stub for possible name */
+};
+
+/* the following are legal, implemented events that user-space can watch for */
+#define IN_ACCESS		0x00000001	/* File was accessed */
+#define IN_MODIFY		0x00000002	/* File was modified */
+#define IN_ATTRIB		0x00000004	/* Metadata changed */
+#define IN_CLOSE_WRITE		0x00000008	/* Writtable file was closed */
+#define IN_CLOSE_NOWRITE	0x00000010	/* Unwrittable file closed */
+#define IN_OPEN			0x00000020	/* File was opened */
+#define IN_MOVED_FROM		0x00000040	/* File was moved from X */
+#define IN_MOVED_TO		0x00000080	/* File was moved to Y */
+#define IN_CREATE		0x00000100	/* Subfile was created */
+#define IN_DELETE		0x00000200	/* Subfile was deleted */
+#define IN_DELETE_SELF		0x00000400	/* Self was deleted */
+#define IN_MOVE_SELF		0x00000800	/* Self was moved */
+
+/* the following are legal events.  they are sent as needed to any watch */
+#define IN_UNMOUNT		0x00002000	/* Backing fs was unmounted */
+#define IN_Q_OVERFLOW		0x00004000	/* Event queued overflowed */
+#define IN_IGNORED		0x00008000	/* File was ignored */
+
+/* helper events */
+#define IN_CLOSE		(IN_CLOSE_WRITE | IN_CLOSE_NOWRITE) /* close */
+#define IN_MOVE			(IN_MOVED_FROM | IN_MOVED_TO) /* moves */
+
+/* special flags */
+#define IN_ONLYDIR		0x01000000	/* only watch the path if it is a directory */
+#define IN_DONT_FOLLOW		0x02000000	/* don't follow a sym link */
+#define IN_EXCL_UNLINK		0x04000000	/* exclude events on unlinked objects */
+#define IN_MASK_ADD		0x20000000	/* add to the mask of an already existing watch */
+#define IN_ISDIR		0x40000000	/* event occurred against dir */
+#define IN_ONESHOT		0x80000000	/* only send event once */
+
+/*
+ * All of the events - we build the list by hand so that we can add flags in
+ * the future and not break backward compatibility.  Apps will get only the
+ * events that they originally wanted.  Be sure to add new events here!
+ */
+#define IN_ALL_EVENTS	(IN_ACCESS | IN_MODIFY | IN_ATTRIB | IN_CLOSE_WRITE | \
+			 IN_CLOSE_NOWRITE | IN_OPEN | IN_MOVED_FROM | \
+			 IN_MOVED_TO | IN_DELETE | IN_CREATE | IN_DELETE_SELF | \
+			 IN_MOVE_SELF)
+
+/* Flags for sys_inotify_init1.  */
+#define IN_CLOEXEC O_CLOEXEC
+#define IN_NONBLOCK O_NONBLOCK
+
+
+#endif /* _UAPI_LINUX_INOTIFY_H */
diff --git a/include/uapi/linux/input.h b/include/uapi/linux/input.h
new file mode 100644
index 00000000000..558828590a6
--- /dev/null
+++ b/include/uapi/linux/input.h
@@ -0,0 +1,1153 @@
+/*
+ * Copyright (c) 1999-2002 Vojtech Pavlik
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef _UAPI_INPUT_H
+#define _UAPI_INPUT_H
+
+
+#ifndef __KERNEL__
+#include <sys/time.h>
+#include <sys/ioctl.h>
+#include <sys/types.h>
+#include <linux/types.h>
+#endif
+
+
+/*
+ * The event structure itself
+ */
+
+struct input_event {
+	struct timeval time;
+	__u16 type;
+	__u16 code;
+	__s32 value;
+};
+
+/*
+ * Protocol version.
+ */
+
+#define EV_VERSION		0x010001
+
+/*
+ * IOCTLs (0x00 - 0x7f)
+ */
+
+struct input_id {
+	__u16 bustype;
+	__u16 vendor;
+	__u16 product;
+	__u16 version;
+};
+
+/**
+ * struct input_absinfo - used by EVIOCGABS/EVIOCSABS ioctls
+ * @value: latest reported value for the axis.
+ * @minimum: specifies minimum value for the axis.
+ * @maximum: specifies maximum value for the axis.
+ * @fuzz: specifies fuzz value that is used to filter noise from
+ *	the event stream.
+ * @flat: values that are within this value will be discarded by
+ *	joydev interface and reported as 0 instead.
+ * @resolution: specifies resolution for the values reported for
+ *	the axis.
+ *
+ * Note that input core does not clamp reported values to the
+ * [minimum, maximum] limits, such task is left to userspace.
+ *
+ * Resolution for main axes (ABS_X, ABS_Y, ABS_Z) is reported in
+ * units per millimeter (units/mm), resolution for rotational axes
+ * (ABS_RX, ABS_RY, ABS_RZ) is reported in units per radian.
+ */
+struct input_absinfo {
+	__s32 value;
+	__s32 minimum;
+	__s32 maximum;
+	__s32 fuzz;
+	__s32 flat;
+	__s32 resolution;
+};
+
+/**
+ * struct input_keymap_entry - used by EVIOCGKEYCODE/EVIOCSKEYCODE ioctls
+ * @scancode: scancode represented in machine-endian form.
+ * @len: length of the scancode that resides in @scancode buffer.
+ * @index: index in the keymap, may be used instead of scancode
+ * @flags: allows to specify how kernel should handle the request. For
+ *	example, setting INPUT_KEYMAP_BY_INDEX flag indicates that kernel
+ *	should perform lookup in keymap by @index instead of @scancode
+ * @keycode: key code assigned to this scancode
+ *
+ * The structure is used to retrieve and modify keymap data. Users have
+ * option of performing lookup either by @scancode itself or by @index
+ * in keymap entry. EVIOCGKEYCODE will also return scancode or index
+ * (depending on which element was used to perform lookup).
+ */
+struct input_keymap_entry {
+#define INPUT_KEYMAP_BY_INDEX	(1 << 0)
+	__u8  flags;
+	__u8  len;
+	__u16 index;
+	__u32 keycode;
+	__u8  scancode[32];
+};
+
+#define EVIOCGVERSION		_IOR('E', 0x01, int)			/* get driver version */
+#define EVIOCGID		_IOR('E', 0x02, struct input_id)	/* get device ID */
+#define EVIOCGREP		_IOR('E', 0x03, unsigned int[2])	/* get repeat settings */
+#define EVIOCSREP		_IOW('E', 0x03, unsigned int[2])	/* set repeat settings */
+
+#define EVIOCGKEYCODE		_IOR('E', 0x04, unsigned int[2])        /* get keycode */
+#define EVIOCGKEYCODE_V2	_IOR('E', 0x04, struct input_keymap_entry)
+#define EVIOCSKEYCODE		_IOW('E', 0x04, unsigned int[2])        /* set keycode */
+#define EVIOCSKEYCODE_V2	_IOW('E', 0x04, struct input_keymap_entry)
+
+#define EVIOCGNAME(len)		_IOC(_IOC_READ, 'E', 0x06, len)		/* get device name */
+#define EVIOCGPHYS(len)		_IOC(_IOC_READ, 'E', 0x07, len)		/* get physical location */
+#define EVIOCGUNIQ(len)		_IOC(_IOC_READ, 'E', 0x08, len)		/* get unique identifier */
+#define EVIOCGPROP(len)		_IOC(_IOC_READ, 'E', 0x09, len)		/* get device properties */
+
+/**
+ * EVIOCGMTSLOTS(len) - get MT slot values
+ * @len: size of the data buffer in bytes
+ *
+ * The ioctl buffer argument should be binary equivalent to
+ *
+ * struct input_mt_request_layout {
+ *	__u32 code;
+ *	__s32 values[num_slots];
+ * };
+ *
+ * where num_slots is the (arbitrary) number of MT slots to extract.
+ *
+ * The ioctl size argument (len) is the size of the buffer, which
+ * should satisfy len = (num_slots + 1) * sizeof(__s32).  If len is
+ * too small to fit all available slots, the first num_slots are
+ * returned.
+ *
+ * Before the call, code is set to the wanted ABS_MT event type. On
+ * return, values[] is filled with the slot values for the specified
+ * ABS_MT code.
+ *
+ * If the request code is not an ABS_MT value, -EINVAL is returned.
+ */
+#define EVIOCGMTSLOTS(len)	_IOC(_IOC_READ, 'E', 0x0a, len)
+
+#define EVIOCGKEY(len)		_IOC(_IOC_READ, 'E', 0x18, len)		/* get global key state */
+#define EVIOCGLED(len)		_IOC(_IOC_READ, 'E', 0x19, len)		/* get all LEDs */
+#define EVIOCGSND(len)		_IOC(_IOC_READ, 'E', 0x1a, len)		/* get all sounds status */
+#define EVIOCGSW(len)		_IOC(_IOC_READ, 'E', 0x1b, len)		/* get all switch states */
+
+#define EVIOCGBIT(ev,len)	_IOC(_IOC_READ, 'E', 0x20 + (ev), len)	/* get event bits */
+#define EVIOCGABS(abs)		_IOR('E', 0x40 + (abs), struct input_absinfo)	/* get abs value/limits */
+#define EVIOCSABS(abs)		_IOW('E', 0xc0 + (abs), struct input_absinfo)	/* set abs value/limits */
+
+#define EVIOCSFF		_IOC(_IOC_WRITE, 'E', 0x80, sizeof(struct ff_effect))	/* send a force effect to a force feedback device */
+#define EVIOCRMFF		_IOW('E', 0x81, int)			/* Erase a force effect */
+#define EVIOCGEFFECTS		_IOR('E', 0x84, int)			/* Report number of effects playable at the same time */
+
+#define EVIOCGRAB		_IOW('E', 0x90, int)			/* Grab/Release device */
+
+#define EVIOCSCLOCKID		_IOW('E', 0xa0, int)			/* Set clockid to be used for timestamps */
+
+/*
+ * Device properties and quirks
+ */
+
+#define INPUT_PROP_POINTER		0x00	/* needs a pointer */
+#define INPUT_PROP_DIRECT		0x01	/* direct input devices */
+#define INPUT_PROP_BUTTONPAD		0x02	/* has button(s) under pad */
+#define INPUT_PROP_SEMI_MT		0x03	/* touch rectangle only */
+
+#define INPUT_PROP_MAX			0x1f
+#define INPUT_PROP_CNT			(INPUT_PROP_MAX + 1)
+
+/*
+ * Event types
+ */
+
+#define EV_SYN			0x00
+#define EV_KEY			0x01
+#define EV_REL			0x02
+#define EV_ABS			0x03
+#define EV_MSC			0x04
+#define EV_SW			0x05
+#define EV_LED			0x11
+#define EV_SND			0x12
+#define EV_REP			0x14
+#define EV_FF			0x15
+#define EV_PWR			0x16
+#define EV_FF_STATUS		0x17
+#define EV_MAX			0x1f
+#define EV_CNT			(EV_MAX+1)
+
+/*
+ * Synchronization events.
+ */
+
+#define SYN_REPORT		0
+#define SYN_CONFIG		1
+#define SYN_MT_REPORT		2
+#define SYN_DROPPED		3
+
+/*
+ * Keys and buttons
+ *
+ * Most of the keys/buttons are modeled after USB HUT 1.12
+ * (see http://www.usb.org/developers/hidpage).
+ * Abbreviations in the comments:
+ * AC - Application Control
+ * AL - Application Launch Button
+ * SC - System Control
+ */
+
+#define KEY_RESERVED		0
+#define KEY_ESC			1
+#define KEY_1			2
+#define KEY_2			3
+#define KEY_3			4
+#define KEY_4			5
+#define KEY_5			6
+#define KEY_6			7
+#define KEY_7			8
+#define KEY_8			9
+#define KEY_9			10
+#define KEY_0			11
+#define KEY_MINUS		12
+#define KEY_EQUAL		13
+#define KEY_BACKSPACE		14
+#define KEY_TAB			15
+#define KEY_Q			16
+#define KEY_W			17
+#define KEY_E			18
+#define KEY_R			19
+#define KEY_T			20
+#define KEY_Y			21
+#define KEY_U			22
+#define KEY_I			23
+#define KEY_O			24
+#define KEY_P			25
+#define KEY_LEFTBRACE		26
+#define KEY_RIGHTBRACE		27
+#define KEY_ENTER		28
+#define KEY_LEFTCTRL		29
+#define KEY_A			30
+#define KEY_S			31
+#define KEY_D			32
+#define KEY_F			33
+#define KEY_G			34
+#define KEY_H			35
+#define KEY_J			36
+#define KEY_K			37
+#define KEY_L			38
+#define KEY_SEMICOLON		39
+#define KEY_APOSTROPHE		40
+#define KEY_GRAVE		41
+#define KEY_LEFTSHIFT		42
+#define KEY_BACKSLASH		43
+#define KEY_Z			44
+#define KEY_X			45
+#define KEY_C			46
+#define KEY_V			47
+#define KEY_B			48
+#define KEY_N			49
+#define KEY_M			50
+#define KEY_COMMA		51
+#define KEY_DOT			52
+#define KEY_SLASH		53
+#define KEY_RIGHTSHIFT		54
+#define KEY_KPASTERISK		55
+#define KEY_LEFTALT		56
+#define KEY_SPACE		57
+#define KEY_CAPSLOCK		58
+#define KEY_F1			59
+#define KEY_F2			60
+#define KEY_F3			61
+#define KEY_F4			62
+#define KEY_F5			63
+#define KEY_F6			64
+#define KEY_F7			65
+#define KEY_F8			66
+#define KEY_F9			67
+#define KEY_F10			68
+#define KEY_NUMLOCK		69
+#define KEY_SCROLLLOCK		70
+#define KEY_KP7			71
+#define KEY_KP8			72
+#define KEY_KP9			73
+#define KEY_KPMINUS		74
+#define KEY_KP4			75
+#define KEY_KP5			76
+#define KEY_KP6			77
+#define KEY_KPPLUS		78
+#define KEY_KP1			79
+#define KEY_KP2			80
+#define KEY_KP3			81
+#define KEY_KP0			82
+#define KEY_KPDOT		83
+
+#define KEY_ZENKAKUHANKAKU	85
+#define KEY_102ND		86
+#define KEY_F11			87
+#define KEY_F12			88
+#define KEY_RO			89
+#define KEY_KATAKANA		90
+#define KEY_HIRAGANA		91
+#define KEY_HENKAN		92
+#define KEY_KATAKANAHIRAGANA	93
+#define KEY_MUHENKAN		94
+#define KEY_KPJPCOMMA		95
+#define KEY_KPENTER		96
+#define KEY_RIGHTCTRL		97
+#define KEY_KPSLASH		98
+#define KEY_SYSRQ		99
+#define KEY_RIGHTALT		100
+#define KEY_LINEFEED		101
+#define KEY_HOME		102
+#define KEY_UP			103
+#define KEY_PAGEUP		104
+#define KEY_LEFT		105
+#define KEY_RIGHT		106
+#define KEY_END			107
+#define KEY_DOWN		108
+#define KEY_PAGEDOWN		109
+#define KEY_INSERT		110
+#define KEY_DELETE		111
+#define KEY_MACRO		112
+#define KEY_MUTE		113
+#define KEY_VOLUMEDOWN		114
+#define KEY_VOLUMEUP		115
+#define KEY_POWER		116	/* SC System Power Down */
+#define KEY_KPEQUAL		117
+#define KEY_KPPLUSMINUS		118
+#define KEY_PAUSE		119
+#define KEY_SCALE		120	/* AL Compiz Scale (Expose) */
+
+#define KEY_KPCOMMA		121
+#define KEY_HANGEUL		122
+#define KEY_HANGUEL		KEY_HANGEUL
+#define KEY_HANJA		123
+#define KEY_YEN			124
+#define KEY_LEFTMETA		125
+#define KEY_RIGHTMETA		126
+#define KEY_COMPOSE		127
+
+#define KEY_STOP		128	/* AC Stop */
+#define KEY_AGAIN		129
+#define KEY_PROPS		130	/* AC Properties */
+#define KEY_UNDO		131	/* AC Undo */
+#define KEY_FRONT		132
+#define KEY_COPY		133	/* AC Copy */
+#define KEY_OPEN		134	/* AC Open */
+#define KEY_PASTE		135	/* AC Paste */
+#define KEY_FIND		136	/* AC Search */
+#define KEY_CUT			137	/* AC Cut */
+#define KEY_HELP		138	/* AL Integrated Help Center */
+#define KEY_MENU		139	/* Menu (show menu) */
+#define KEY_CALC		140	/* AL Calculator */
+#define KEY_SETUP		141
+#define KEY_SLEEP		142	/* SC System Sleep */
+#define KEY_WAKEUP		143	/* System Wake Up */
+#define KEY_FILE		144	/* AL Local Machine Browser */
+#define KEY_SENDFILE		145
+#define KEY_DELETEFILE		146
+#define KEY_XFER		147
+#define KEY_PROG1		148
+#define KEY_PROG2		149
+#define KEY_WWW			150	/* AL Internet Browser */
+#define KEY_MSDOS		151
+#define KEY_COFFEE		152	/* AL Terminal Lock/Screensaver */
+#define KEY_SCREENLOCK		KEY_COFFEE
+#define KEY_DIRECTION		153
+#define KEY_CYCLEWINDOWS	154
+#define KEY_MAIL		155
+#define KEY_BOOKMARKS		156	/* AC Bookmarks */
+#define KEY_COMPUTER		157
+#define KEY_BACK		158	/* AC Back */
+#define KEY_FORWARD		159	/* AC Forward */
+#define KEY_CLOSECD		160
+#define KEY_EJECTCD		161
+#define KEY_EJECTCLOSECD	162
+#define KEY_NEXTSONG		163
+#define KEY_PLAYPAUSE		164
+#define KEY_PREVIOUSSONG	165
+#define KEY_STOPCD		166
+#define KEY_RECORD		167
+#define KEY_REWIND		168
+#define KEY_PHONE		169	/* Media Select Telephone */
+#define KEY_ISO			170
+#define KEY_CONFIG		171	/* AL Consumer Control Configuration */
+#define KEY_HOMEPAGE		172	/* AC Home */
+#define KEY_REFRESH		173	/* AC Refresh */
+#define KEY_EXIT		174	/* AC Exit */
+#define KEY_MOVE		175
+#define KEY_EDIT		176
+#define KEY_SCROLLUP		177
+#define KEY_SCROLLDOWN		178
+#define KEY_KPLEFTPAREN		179
+#define KEY_KPRIGHTPAREN	180
+#define KEY_NEW			181	/* AC New */
+#define KEY_REDO		182	/* AC Redo/Repeat */
+
+#define KEY_F13			183
+#define KEY_F14			184
+#define KEY_F15			185
+#define KEY_F16			186
+#define KEY_F17			187
+#define KEY_F18			188
+#define KEY_F19			189
+#define KEY_F20			190
+#define KEY_F21			191
+#define KEY_F22			192
+#define KEY_F23			193
+#define KEY_F24			194
+
+#define KEY_PLAYCD		200
+#define KEY_PAUSECD		201
+#define KEY_PROG3		202
+#define KEY_PROG4		203
+#define KEY_DASHBOARD		204	/* AL Dashboard */
+#define KEY_SUSPEND		205
+#define KEY_CLOSE		206	/* AC Close */
+#define KEY_PLAY		207
+#define KEY_FASTFORWARD		208
+#define KEY_BASSBOOST		209
+#define KEY_PRINT		210	/* AC Print */
+#define KEY_HP			211
+#define KEY_CAMERA		212
+#define KEY_SOUND		213
+#define KEY_QUESTION		214
+#define KEY_EMAIL		215
+#define KEY_CHAT		216
+#define KEY_SEARCH		217
+#define KEY_CONNECT		218
+#define KEY_FINANCE		219	/* AL Checkbook/Finance */
+#define KEY_SPORT		220
+#define KEY_SHOP		221
+#define KEY_ALTERASE		222
+#define KEY_CANCEL		223	/* AC Cancel */
+#define KEY_BRIGHTNESSDOWN	224
+#define KEY_BRIGHTNESSUP	225
+#define KEY_MEDIA		226
+
+#define KEY_SWITCHVIDEOMODE	227	/* Cycle between available video
+					   outputs (Monitor/LCD/TV-out/etc) */
+#define KEY_KBDILLUMTOGGLE	228
+#define KEY_KBDILLUMDOWN	229
+#define KEY_KBDILLUMUP		230
+
+#define KEY_SEND		231	/* AC Send */
+#define KEY_REPLY		232	/* AC Reply */
+#define KEY_FORWARDMAIL		233	/* AC Forward Msg */
+#define KEY_SAVE		234	/* AC Save */
+#define KEY_DOCUMENTS		235
+
+#define KEY_BATTERY		236
+
+#define KEY_BLUETOOTH		237
+#define KEY_WLAN		238
+#define KEY_UWB			239
+
+#define KEY_UNKNOWN		240
+
+#define KEY_VIDEO_NEXT		241	/* drive next video source */
+#define KEY_VIDEO_PREV		242	/* drive previous video source */
+#define KEY_BRIGHTNESS_CYCLE	243	/* brightness up, after max is min */
+#define KEY_BRIGHTNESS_ZERO	244	/* brightness off, use ambient */
+#define KEY_DISPLAY_OFF		245	/* display device to off state */
+
+#define KEY_WIMAX		246
+#define KEY_RFKILL		247	/* Key that controls all radios */
+
+#define KEY_MICMUTE		248	/* Mute / unmute the microphone */
+
+/* Code 255 is reserved for special needs of AT keyboard driver */
+
+#define BTN_MISC		0x100
+#define BTN_0			0x100
+#define BTN_1			0x101
+#define BTN_2			0x102
+#define BTN_3			0x103
+#define BTN_4			0x104
+#define BTN_5			0x105
+#define BTN_6			0x106
+#define BTN_7			0x107
+#define BTN_8			0x108
+#define BTN_9			0x109
+
+#define BTN_MOUSE		0x110
+#define BTN_LEFT		0x110
+#define BTN_RIGHT		0x111
+#define BTN_MIDDLE		0x112
+#define BTN_SIDE		0x113
+#define BTN_EXTRA		0x114
+#define BTN_FORWARD		0x115
+#define BTN_BACK		0x116
+#define BTN_TASK		0x117
+
+#define BTN_JOYSTICK		0x120
+#define BTN_TRIGGER		0x120
+#define BTN_THUMB		0x121
+#define BTN_THUMB2		0x122
+#define BTN_TOP			0x123
+#define BTN_TOP2		0x124
+#define BTN_PINKIE		0x125
+#define BTN_BASE		0x126
+#define BTN_BASE2		0x127
+#define BTN_BASE3		0x128
+#define BTN_BASE4		0x129
+#define BTN_BASE5		0x12a
+#define BTN_BASE6		0x12b
+#define BTN_DEAD		0x12f
+
+#define BTN_GAMEPAD		0x130
+#define BTN_A			0x130
+#define BTN_B			0x131
+#define BTN_C			0x132
+#define BTN_X			0x133
+#define BTN_Y			0x134
+#define BTN_Z			0x135
+#define BTN_TL			0x136
+#define BTN_TR			0x137
+#define BTN_TL2			0x138
+#define BTN_TR2			0x139
+#define BTN_SELECT		0x13a
+#define BTN_START		0x13b
+#define BTN_MODE		0x13c
+#define BTN_THUMBL		0x13d
+#define BTN_THUMBR		0x13e
+
+#define BTN_DIGI		0x140
+#define BTN_TOOL_PEN		0x140
+#define BTN_TOOL_RUBBER		0x141
+#define BTN_TOOL_BRUSH		0x142
+#define BTN_TOOL_PENCIL		0x143
+#define BTN_TOOL_AIRBRUSH	0x144
+#define BTN_TOOL_FINGER		0x145
+#define BTN_TOOL_MOUSE		0x146
+#define BTN_TOOL_LENS		0x147
+#define BTN_TOOL_QUINTTAP	0x148	/* Five fingers on trackpad */
+#define BTN_TOUCH		0x14a
+#define BTN_STYLUS		0x14b
+#define BTN_STYLUS2		0x14c
+#define BTN_TOOL_DOUBLETAP	0x14d
+#define BTN_TOOL_TRIPLETAP	0x14e
+#define BTN_TOOL_QUADTAP	0x14f	/* Four fingers on trackpad */
+
+#define BTN_WHEEL		0x150
+#define BTN_GEAR_DOWN		0x150
+#define BTN_GEAR_UP		0x151
+
+#define KEY_OK			0x160
+#define KEY_SELECT		0x161
+#define KEY_GOTO		0x162
+#define KEY_CLEAR		0x163
+#define KEY_POWER2		0x164
+#define KEY_OPTION		0x165
+#define KEY_INFO		0x166	/* AL OEM Features/Tips/Tutorial */
+#define KEY_TIME		0x167
+#define KEY_VENDOR		0x168
+#define KEY_ARCHIVE		0x169
+#define KEY_PROGRAM		0x16a	/* Media Select Program Guide */
+#define KEY_CHANNEL		0x16b
+#define KEY_FAVORITES		0x16c
+#define KEY_EPG			0x16d
+#define KEY_PVR			0x16e	/* Media Select Home */
+#define KEY_MHP			0x16f
+#define KEY_LANGUAGE		0x170
+#define KEY_TITLE		0x171
+#define KEY_SUBTITLE		0x172
+#define KEY_ANGLE		0x173
+#define KEY_ZOOM		0x174
+#define KEY_MODE		0x175
+#define KEY_KEYBOARD		0x176
+#define KEY_SCREEN		0x177
+#define KEY_PC			0x178	/* Media Select Computer */
+#define KEY_TV			0x179	/* Media Select TV */
+#define KEY_TV2			0x17a	/* Media Select Cable */
+#define KEY_VCR			0x17b	/* Media Select VCR */
+#define KEY_VCR2		0x17c	/* VCR Plus */
+#define KEY_SAT			0x17d	/* Media Select Satellite */
+#define KEY_SAT2		0x17e
+#define KEY_CD			0x17f	/* Media Select CD */
+#define KEY_TAPE		0x180	/* Media Select Tape */
+#define KEY_RADIO		0x181
+#define KEY_TUNER		0x182	/* Media Select Tuner */
+#define KEY_PLAYER		0x183
+#define KEY_TEXT		0x184
+#define KEY_DVD			0x185	/* Media Select DVD */
+#define KEY_AUX			0x186
+#define KEY_MP3			0x187
+#define KEY_AUDIO		0x188	/* AL Audio Browser */
+#define KEY_VIDEO		0x189	/* AL Movie Browser */
+#define KEY_DIRECTORY		0x18a
+#define KEY_LIST		0x18b
+#define KEY_MEMO		0x18c	/* Media Select Messages */
+#define KEY_CALENDAR		0x18d
+#define KEY_RED			0x18e
+#define KEY_GREEN		0x18f
+#define KEY_YELLOW		0x190
+#define KEY_BLUE		0x191
+#define KEY_CHANNELUP		0x192	/* Channel Increment */
+#define KEY_CHANNELDOWN		0x193	/* Channel Decrement */
+#define KEY_FIRST		0x194
+#define KEY_LAST		0x195	/* Recall Last */
+#define KEY_AB			0x196
+#define KEY_NEXT		0x197
+#define KEY_RESTART		0x198
+#define KEY_SLOW		0x199
+#define KEY_SHUFFLE		0x19a
+#define KEY_BREAK		0x19b
+#define KEY_PREVIOUS		0x19c
+#define KEY_DIGITS		0x19d
+#define KEY_TEEN		0x19e
+#define KEY_TWEN		0x19f
+#define KEY_VIDEOPHONE		0x1a0	/* Media Select Video Phone */
+#define KEY_GAMES		0x1a1	/* Media Select Games */
+#define KEY_ZOOMIN		0x1a2	/* AC Zoom In */
+#define KEY_ZOOMOUT		0x1a3	/* AC Zoom Out */
+#define KEY_ZOOMRESET		0x1a4	/* AC Zoom */
+#define KEY_WORDPROCESSOR	0x1a5	/* AL Word Processor */
+#define KEY_EDITOR		0x1a6	/* AL Text Editor */
+#define KEY_SPREADSHEET		0x1a7	/* AL Spreadsheet */
+#define KEY_GRAPHICSEDITOR	0x1a8	/* AL Graphics Editor */
+#define KEY_PRESENTATION	0x1a9	/* AL Presentation App */
+#define KEY_DATABASE		0x1aa	/* AL Database App */
+#define KEY_NEWS		0x1ab	/* AL Newsreader */
+#define KEY_VOICEMAIL		0x1ac	/* AL Voicemail */
+#define KEY_ADDRESSBOOK		0x1ad	/* AL Contacts/Address Book */
+#define KEY_MESSENGER		0x1ae	/* AL Instant Messaging */
+#define KEY_DISPLAYTOGGLE	0x1af	/* Turn display (LCD) on and off */
+#define KEY_SPELLCHECK		0x1b0   /* AL Spell Check */
+#define KEY_LOGOFF		0x1b1   /* AL Logoff */
+
+#define KEY_DOLLAR		0x1b2
+#define KEY_EURO		0x1b3
+
+#define KEY_FRAMEBACK		0x1b4	/* Consumer - transport controls */
+#define KEY_FRAMEFORWARD	0x1b5
+#define KEY_CONTEXT_MENU	0x1b6	/* GenDesc - system context menu */
+#define KEY_MEDIA_REPEAT	0x1b7	/* Consumer - transport control */
+#define KEY_10CHANNELSUP	0x1b8	/* 10 channels up (10+) */
+#define KEY_10CHANNELSDOWN	0x1b9	/* 10 channels down (10-) */
+#define KEY_IMAGES		0x1ba	/* AL Image Browser */
+
+#define KEY_DEL_EOL		0x1c0
+#define KEY_DEL_EOS		0x1c1
+#define KEY_INS_LINE		0x1c2
+#define KEY_DEL_LINE		0x1c3
+
+#define KEY_FN			0x1d0
+#define KEY_FN_ESC		0x1d1
+#define KEY_FN_F1		0x1d2
+#define KEY_FN_F2		0x1d3
+#define KEY_FN_F3		0x1d4
+#define KEY_FN_F4		0x1d5
+#define KEY_FN_F5		0x1d6
+#define KEY_FN_F6		0x1d7
+#define KEY_FN_F7		0x1d8
+#define KEY_FN_F8		0x1d9
+#define KEY_FN_F9		0x1da
+#define KEY_FN_F10		0x1db
+#define KEY_FN_F11		0x1dc
+#define KEY_FN_F12		0x1dd
+#define KEY_FN_1		0x1de
+#define KEY_FN_2		0x1df
+#define KEY_FN_D		0x1e0
+#define KEY_FN_E		0x1e1
+#define KEY_FN_F		0x1e2
+#define KEY_FN_S		0x1e3
+#define KEY_FN_B		0x1e4
+
+#define KEY_BRL_DOT1		0x1f1
+#define KEY_BRL_DOT2		0x1f2
+#define KEY_BRL_DOT3		0x1f3
+#define KEY_BRL_DOT4		0x1f4
+#define KEY_BRL_DOT5		0x1f5
+#define KEY_BRL_DOT6		0x1f6
+#define KEY_BRL_DOT7		0x1f7
+#define KEY_BRL_DOT8		0x1f8
+#define KEY_BRL_DOT9		0x1f9
+#define KEY_BRL_DOT10		0x1fa
+
+#define KEY_NUMERIC_0		0x200	/* used by phones, remote controls, */
+#define KEY_NUMERIC_1		0x201	/* and other keypads */
+#define KEY_NUMERIC_2		0x202
+#define KEY_NUMERIC_3		0x203
+#define KEY_NUMERIC_4		0x204
+#define KEY_NUMERIC_5		0x205
+#define KEY_NUMERIC_6		0x206
+#define KEY_NUMERIC_7		0x207
+#define KEY_NUMERIC_8		0x208
+#define KEY_NUMERIC_9		0x209
+#define KEY_NUMERIC_STAR	0x20a
+#define KEY_NUMERIC_POUND	0x20b
+
+#define KEY_CAMERA_FOCUS	0x210
+#define KEY_WPS_BUTTON		0x211	/* WiFi Protected Setup key */
+
+#define KEY_TOUCHPAD_TOGGLE	0x212	/* Request switch touchpad on or off */
+#define KEY_TOUCHPAD_ON		0x213
+#define KEY_TOUCHPAD_OFF	0x214
+
+#define KEY_CAMERA_ZOOMIN	0x215
+#define KEY_CAMERA_ZOOMOUT	0x216
+#define KEY_CAMERA_UP		0x217
+#define KEY_CAMERA_DOWN		0x218
+#define KEY_CAMERA_LEFT		0x219
+#define KEY_CAMERA_RIGHT	0x21a
+
+#define BTN_TRIGGER_HAPPY		0x2c0
+#define BTN_TRIGGER_HAPPY1		0x2c0
+#define BTN_TRIGGER_HAPPY2		0x2c1
+#define BTN_TRIGGER_HAPPY3		0x2c2
+#define BTN_TRIGGER_HAPPY4		0x2c3
+#define BTN_TRIGGER_HAPPY5		0x2c4
+#define BTN_TRIGGER_HAPPY6		0x2c5
+#define BTN_TRIGGER_HAPPY7		0x2c6
+#define BTN_TRIGGER_HAPPY8		0x2c7
+#define BTN_TRIGGER_HAPPY9		0x2c8
+#define BTN_TRIGGER_HAPPY10		0x2c9
+#define BTN_TRIGGER_HAPPY11		0x2ca
+#define BTN_TRIGGER_HAPPY12		0x2cb
+#define BTN_TRIGGER_HAPPY13		0x2cc
+#define BTN_TRIGGER_HAPPY14		0x2cd
+#define BTN_TRIGGER_HAPPY15		0x2ce
+#define BTN_TRIGGER_HAPPY16		0x2cf
+#define BTN_TRIGGER_HAPPY17		0x2d0
+#define BTN_TRIGGER_HAPPY18		0x2d1
+#define BTN_TRIGGER_HAPPY19		0x2d2
+#define BTN_TRIGGER_HAPPY20		0x2d3
+#define BTN_TRIGGER_HAPPY21		0x2d4
+#define BTN_TRIGGER_HAPPY22		0x2d5
+#define BTN_TRIGGER_HAPPY23		0x2d6
+#define BTN_TRIGGER_HAPPY24		0x2d7
+#define BTN_TRIGGER_HAPPY25		0x2d8
+#define BTN_TRIGGER_HAPPY26		0x2d9
+#define BTN_TRIGGER_HAPPY27		0x2da
+#define BTN_TRIGGER_HAPPY28		0x2db
+#define BTN_TRIGGER_HAPPY29		0x2dc
+#define BTN_TRIGGER_HAPPY30		0x2dd
+#define BTN_TRIGGER_HAPPY31		0x2de
+#define BTN_TRIGGER_HAPPY32		0x2df
+#define BTN_TRIGGER_HAPPY33		0x2e0
+#define BTN_TRIGGER_HAPPY34		0x2e1
+#define BTN_TRIGGER_HAPPY35		0x2e2
+#define BTN_TRIGGER_HAPPY36		0x2e3
+#define BTN_TRIGGER_HAPPY37		0x2e4
+#define BTN_TRIGGER_HAPPY38		0x2e5
+#define BTN_TRIGGER_HAPPY39		0x2e6
+#define BTN_TRIGGER_HAPPY40		0x2e7
+
+/* We avoid low common keys in module aliases so they don't get huge. */
+#define KEY_MIN_INTERESTING	KEY_MUTE
+#define KEY_MAX			0x2ff
+#define KEY_CNT			(KEY_MAX+1)
+
+/*
+ * Relative axes
+ */
+
+#define REL_X			0x00
+#define REL_Y			0x01
+#define REL_Z			0x02
+#define REL_RX			0x03
+#define REL_RY			0x04
+#define REL_RZ			0x05
+#define REL_HWHEEL		0x06
+#define REL_DIAL		0x07
+#define REL_WHEEL		0x08
+#define REL_MISC		0x09
+#define REL_MAX			0x0f
+#define REL_CNT			(REL_MAX+1)
+
+/*
+ * Absolute axes
+ */
+
+#define ABS_X			0x00
+#define ABS_Y			0x01
+#define ABS_Z			0x02
+#define ABS_RX			0x03
+#define ABS_RY			0x04
+#define ABS_RZ			0x05
+#define ABS_THROTTLE		0x06
+#define ABS_RUDDER		0x07
+#define ABS_WHEEL		0x08
+#define ABS_GAS			0x09
+#define ABS_BRAKE		0x0a
+#define ABS_HAT0X		0x10
+#define ABS_HAT0Y		0x11
+#define ABS_HAT1X		0x12
+#define ABS_HAT1Y		0x13
+#define ABS_HAT2X		0x14
+#define ABS_HAT2Y		0x15
+#define ABS_HAT3X		0x16
+#define ABS_HAT3Y		0x17
+#define ABS_PRESSURE		0x18
+#define ABS_DISTANCE		0x19
+#define ABS_TILT_X		0x1a
+#define ABS_TILT_Y		0x1b
+#define ABS_TOOL_WIDTH		0x1c
+
+#define ABS_VOLUME		0x20
+
+#define ABS_MISC		0x28
+
+#define ABS_MT_SLOT		0x2f	/* MT slot being modified */
+#define ABS_MT_TOUCH_MAJOR	0x30	/* Major axis of touching ellipse */
+#define ABS_MT_TOUCH_MINOR	0x31	/* Minor axis (omit if circular) */
+#define ABS_MT_WIDTH_MAJOR	0x32	/* Major axis of approaching ellipse */
+#define ABS_MT_WIDTH_MINOR	0x33	/* Minor axis (omit if circular) */
+#define ABS_MT_ORIENTATION	0x34	/* Ellipse orientation */
+#define ABS_MT_POSITION_X	0x35	/* Center X touch position */
+#define ABS_MT_POSITION_Y	0x36	/* Center Y touch position */
+#define ABS_MT_TOOL_TYPE	0x37	/* Type of touching device */
+#define ABS_MT_BLOB_ID		0x38	/* Group a set of packets as a blob */
+#define ABS_MT_TRACKING_ID	0x39	/* Unique ID of initiated contact */
+#define ABS_MT_PRESSURE		0x3a	/* Pressure on contact area */
+#define ABS_MT_DISTANCE		0x3b	/* Contact hover distance */
+#define ABS_MT_TOOL_X		0x3c	/* Center X tool position */
+#define ABS_MT_TOOL_Y		0x3d	/* Center Y tool position */
+
+
+#define ABS_MAX			0x3f
+#define ABS_CNT			(ABS_MAX+1)
+
+/*
+ * Switch events
+ */
+
+#define SW_LID			0x00  /* set = lid shut */
+#define SW_TABLET_MODE		0x01  /* set = tablet mode */
+#define SW_HEADPHONE_INSERT	0x02  /* set = inserted */
+#define SW_RFKILL_ALL		0x03  /* rfkill master switch, type "any"
+					 set = radio enabled */
+#define SW_RADIO		SW_RFKILL_ALL	/* deprecated */
+#define SW_MICROPHONE_INSERT	0x04  /* set = inserted */
+#define SW_DOCK			0x05  /* set = plugged into dock */
+#define SW_LINEOUT_INSERT	0x06  /* set = inserted */
+#define SW_JACK_PHYSICAL_INSERT 0x07  /* set = mechanical switch set */
+#define SW_VIDEOOUT_INSERT	0x08  /* set = inserted */
+#define SW_CAMERA_LENS_COVER	0x09  /* set = lens covered */
+#define SW_KEYPAD_SLIDE		0x0a  /* set = keypad slide out */
+#define SW_FRONT_PROXIMITY	0x0b  /* set = front proximity sensor active */
+#define SW_ROTATE_LOCK		0x0c  /* set = rotate locked/disabled */
+#define SW_LINEIN_INSERT	0x0d  /* set = inserted */
+#define SW_MAX			0x0f
+#define SW_CNT			(SW_MAX+1)
+
+/*
+ * Misc events
+ */
+
+#define MSC_SERIAL		0x00
+#define MSC_PULSELED		0x01
+#define MSC_GESTURE		0x02
+#define MSC_RAW			0x03
+#define MSC_SCAN		0x04
+#define MSC_MAX			0x07
+#define MSC_CNT			(MSC_MAX+1)
+
+/*
+ * LEDs
+ */
+
+#define LED_NUML		0x00
+#define LED_CAPSL		0x01
+#define LED_SCROLLL		0x02
+#define LED_COMPOSE		0x03
+#define LED_KANA		0x04
+#define LED_SLEEP		0x05
+#define LED_SUSPEND		0x06
+#define LED_MUTE		0x07
+#define LED_MISC		0x08
+#define LED_MAIL		0x09
+#define LED_CHARGING		0x0a
+#define LED_MAX			0x0f
+#define LED_CNT			(LED_MAX+1)
+
+/*
+ * Autorepeat values
+ */
+
+#define REP_DELAY		0x00
+#define REP_PERIOD		0x01
+#define REP_MAX			0x01
+#define REP_CNT			(REP_MAX+1)
+
+/*
+ * Sounds
+ */
+
+#define SND_CLICK		0x00
+#define SND_BELL		0x01
+#define SND_TONE		0x02
+#define SND_MAX			0x07
+#define SND_CNT			(SND_MAX+1)
+
+/*
+ * IDs.
+ */
+
+#define ID_BUS			0
+#define ID_VENDOR		1
+#define ID_PRODUCT		2
+#define ID_VERSION		3
+
+#define BUS_PCI			0x01
+#define BUS_ISAPNP		0x02
+#define BUS_USB			0x03
+#define BUS_HIL			0x04
+#define BUS_BLUETOOTH		0x05
+#define BUS_VIRTUAL		0x06
+
+#define BUS_ISA			0x10
+#define BUS_I8042		0x11
+#define BUS_XTKBD		0x12
+#define BUS_RS232		0x13
+#define BUS_GAMEPORT		0x14
+#define BUS_PARPORT		0x15
+#define BUS_AMIGA		0x16
+#define BUS_ADB			0x17
+#define BUS_I2C			0x18
+#define BUS_HOST		0x19
+#define BUS_GSC			0x1A
+#define BUS_ATARI		0x1B
+#define BUS_SPI			0x1C
+
+/*
+ * MT_TOOL types
+ */
+#define MT_TOOL_FINGER		0
+#define MT_TOOL_PEN		1
+#define MT_TOOL_MAX		1
+
+/*
+ * Values describing the status of a force-feedback effect
+ */
+#define FF_STATUS_STOPPED	0x00
+#define FF_STATUS_PLAYING	0x01
+#define FF_STATUS_MAX		0x01
+
+/*
+ * Structures used in ioctls to upload effects to a device
+ * They are pieces of a bigger structure (called ff_effect)
+ */
+
+/*
+ * All duration values are expressed in ms. Values above 32767 ms (0x7fff)
+ * should not be used and have unspecified results.
+ */
+
+/**
+ * struct ff_replay - defines scheduling of the force-feedback effect
+ * @length: duration of the effect
+ * @delay: delay before effect should start playing
+ */
+struct ff_replay {
+	__u16 length;
+	__u16 delay;
+};
+
+/**
+ * struct ff_trigger - defines what triggers the force-feedback effect
+ * @button: number of the button triggering the effect
+ * @interval: controls how soon the effect can be re-triggered
+ */
+struct ff_trigger {
+	__u16 button;
+	__u16 interval;
+};
+
+/**
+ * struct ff_envelope - generic force-feedback effect envelope
+ * @attack_length: duration of the attack (ms)
+ * @attack_level: level at the beginning of the attack
+ * @fade_length: duration of fade (ms)
+ * @fade_level: level at the end of fade
+ *
+ * The @attack_level and @fade_level are absolute values; when applying
+ * envelope force-feedback core will convert to positive/negative
+ * value based on polarity of the default level of the effect.
+ * Valid range for the attack and fade levels is 0x0000 - 0x7fff
+ */
+struct ff_envelope {
+	__u16 attack_length;
+	__u16 attack_level;
+	__u16 fade_length;
+	__u16 fade_level;
+};
+
+/**
+ * struct ff_constant_effect - defines parameters of a constant force-feedback effect
+ * @level: strength of the effect; may be negative
+ * @envelope: envelope data
+ */
+struct ff_constant_effect {
+	__s16 level;
+	struct ff_envelope envelope;
+};
+
+/**
+ * struct ff_ramp_effect - defines parameters of a ramp force-feedback effect
+ * @start_level: beginning strength of the effect; may be negative
+ * @end_level: final strength of the effect; may be negative
+ * @envelope: envelope data
+ */
+struct ff_ramp_effect {
+	__s16 start_level;
+	__s16 end_level;
+	struct ff_envelope envelope;
+};
+
+/**
+ * struct ff_condition_effect - defines a spring or friction force-feedback effect
+ * @right_saturation: maximum level when joystick moved all way to the right
+ * @left_saturation: same for the left side
+ * @right_coeff: controls how fast the force grows when the joystick moves
+ *	to the right
+ * @left_coeff: same for the left side
+ * @deadband: size of the dead zone, where no force is produced
+ * @center: position of the dead zone
+ */
+struct ff_condition_effect {
+	__u16 right_saturation;
+	__u16 left_saturation;
+
+	__s16 right_coeff;
+	__s16 left_coeff;
+
+	__u16 deadband;
+	__s16 center;
+};
+
+/**
+ * struct ff_periodic_effect - defines parameters of a periodic force-feedback effect
+ * @waveform: kind of the effect (wave)
+ * @period: period of the wave (ms)
+ * @magnitude: peak value
+ * @offset: mean value of the wave (roughly)
+ * @phase: 'horizontal' shift
+ * @envelope: envelope data
+ * @custom_len: number of samples (FF_CUSTOM only)
+ * @custom_data: buffer of samples (FF_CUSTOM only)
+ *
+ * Known waveforms - FF_SQUARE, FF_TRIANGLE, FF_SINE, FF_SAW_UP,
+ * FF_SAW_DOWN, FF_CUSTOM. The exact syntax FF_CUSTOM is undefined
+ * for the time being as no driver supports it yet.
+ *
+ * Note: the data pointed by custom_data is copied by the driver.
+ * You can therefore dispose of the memory after the upload/update.
+ */
+struct ff_periodic_effect {
+	__u16 waveform;
+	__u16 period;
+	__s16 magnitude;
+	__s16 offset;
+	__u16 phase;
+
+	struct ff_envelope envelope;
+
+	__u32 custom_len;
+	__s16 __user *custom_data;
+};
+
+/**
+ * struct ff_rumble_effect - defines parameters of a periodic force-feedback effect
+ * @strong_magnitude: magnitude of the heavy motor
+ * @weak_magnitude: magnitude of the light one
+ *
+ * Some rumble pads have two motors of different weight. Strong_magnitude
+ * represents the magnitude of the vibration generated by the heavy one.
+ */
+struct ff_rumble_effect {
+	__u16 strong_magnitude;
+	__u16 weak_magnitude;
+};
+
+/**
+ * struct ff_effect - defines force feedback effect
+ * @type: type of the effect (FF_CONSTANT, FF_PERIODIC, FF_RAMP, FF_SPRING,
+ *	FF_FRICTION, FF_DAMPER, FF_RUMBLE, FF_INERTIA, or FF_CUSTOM)
+ * @id: an unique id assigned to an effect
+ * @direction: direction of the effect
+ * @trigger: trigger conditions (struct ff_trigger)
+ * @replay: scheduling of the effect (struct ff_replay)
+ * @u: effect-specific structure (one of ff_constant_effect, ff_ramp_effect,
+ *	ff_periodic_effect, ff_condition_effect, ff_rumble_effect) further
+ *	defining effect parameters
+ *
+ * This structure is sent through ioctl from the application to the driver.
+ * To create a new effect application should set its @id to -1; the kernel
+ * will return assigned @id which can later be used to update or delete
+ * this effect.
+ *
+ * Direction of the effect is encoded as follows:
+ *	0 deg -> 0x0000 (down)
+ *	90 deg -> 0x4000 (left)
+ *	180 deg -> 0x8000 (up)
+ *	270 deg -> 0xC000 (right)
+ */
+struct ff_effect {
+	__u16 type;
+	__s16 id;
+	__u16 direction;
+	struct ff_trigger trigger;
+	struct ff_replay replay;
+
+	union {
+		struct ff_constant_effect constant;
+		struct ff_ramp_effect ramp;
+		struct ff_periodic_effect periodic;
+		struct ff_condition_effect condition[2]; /* One for each axis */
+		struct ff_rumble_effect rumble;
+	} u;
+};
+
+/*
+ * Force feedback effect types
+ */
+
+#define FF_RUMBLE	0x50
+#define FF_PERIODIC	0x51
+#define FF_CONSTANT	0x52
+#define FF_SPRING	0x53
+#define FF_FRICTION	0x54
+#define FF_DAMPER	0x55
+#define FF_INERTIA	0x56
+#define FF_RAMP		0x57
+
+#define FF_EFFECT_MIN	FF_RUMBLE
+#define FF_EFFECT_MAX	FF_RAMP
+
+/*
+ * Force feedback periodic effect types
+ */
+
+#define FF_SQUARE	0x58
+#define FF_TRIANGLE	0x59
+#define FF_SINE		0x5a
+#define FF_SAW_UP	0x5b
+#define FF_SAW_DOWN	0x5c
+#define FF_CUSTOM	0x5d
+
+#define FF_WAVEFORM_MIN	FF_SQUARE
+#define FF_WAVEFORM_MAX	FF_CUSTOM
+
+/*
+ * Set ff device properties
+ */
+
+#define FF_GAIN		0x60
+#define FF_AUTOCENTER	0x61
+
+#define FF_MAX		0x7f
+#define FF_CNT		(FF_MAX+1)
+
+#endif /* _UAPI_INPUT_H */
diff --git a/include/uapi/linux/ioctl.h b/include/uapi/linux/ioctl.h
new file mode 100644
index 00000000000..aa91eb3951e
--- /dev/null
+++ b/include/uapi/linux/ioctl.h
@@ -0,0 +1,7 @@
+#ifndef _LINUX_IOCTL_H
+#define _LINUX_IOCTL_H
+
+#include <asm/ioctl.h>
+
+#endif /* _LINUX_IOCTL_H */
+
diff --git a/include/uapi/linux/ip.h b/include/uapi/linux/ip.h
new file mode 100644
index 00000000000..6cf06bfd841
--- /dev/null
+++ b/include/uapi/linux/ip.h
@@ -0,0 +1,136 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the IP protocol.
+ *
+ * Version:	@(#)ip.h	1.0.2	04/28/93
+ *
+ * Authors:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_LINUX_IP_H
+#define _UAPI_LINUX_IP_H
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+#define IPTOS_TOS_MASK		0x1E
+#define IPTOS_TOS(tos)		((tos)&IPTOS_TOS_MASK)
+#define	IPTOS_LOWDELAY		0x10
+#define	IPTOS_THROUGHPUT	0x08
+#define	IPTOS_RELIABILITY	0x04
+#define	IPTOS_MINCOST		0x02
+
+#define IPTOS_PREC_MASK		0xE0
+#define IPTOS_PREC(tos)		((tos)&IPTOS_PREC_MASK)
+#define IPTOS_PREC_NETCONTROL           0xe0
+#define IPTOS_PREC_INTERNETCONTROL      0xc0
+#define IPTOS_PREC_CRITIC_ECP           0xa0
+#define IPTOS_PREC_FLASHOVERRIDE        0x80
+#define IPTOS_PREC_FLASH                0x60
+#define IPTOS_PREC_IMMEDIATE            0x40
+#define IPTOS_PREC_PRIORITY             0x20
+#define IPTOS_PREC_ROUTINE              0x00
+
+
+/* IP options */
+#define IPOPT_COPY		0x80
+#define IPOPT_CLASS_MASK	0x60
+#define IPOPT_NUMBER_MASK	0x1f
+
+#define	IPOPT_COPIED(o)		((o)&IPOPT_COPY)
+#define	IPOPT_CLASS(o)		((o)&IPOPT_CLASS_MASK)
+#define	IPOPT_NUMBER(o)		((o)&IPOPT_NUMBER_MASK)
+
+#define	IPOPT_CONTROL		0x00
+#define	IPOPT_RESERVED1		0x20
+#define	IPOPT_MEASUREMENT	0x40
+#define	IPOPT_RESERVED2		0x60
+
+#define IPOPT_END	(0 |IPOPT_CONTROL)
+#define IPOPT_NOOP	(1 |IPOPT_CONTROL)
+#define IPOPT_SEC	(2 |IPOPT_CONTROL|IPOPT_COPY)
+#define IPOPT_LSRR	(3 |IPOPT_CONTROL|IPOPT_COPY)
+#define IPOPT_TIMESTAMP	(4 |IPOPT_MEASUREMENT)
+#define IPOPT_CIPSO	(6 |IPOPT_CONTROL|IPOPT_COPY)
+#define IPOPT_RR	(7 |IPOPT_CONTROL)
+#define IPOPT_SID	(8 |IPOPT_CONTROL|IPOPT_COPY)
+#define IPOPT_SSRR	(9 |IPOPT_CONTROL|IPOPT_COPY)
+#define IPOPT_RA	(20|IPOPT_CONTROL|IPOPT_COPY)
+
+#define IPVERSION	4
+#define MAXTTL		255
+#define IPDEFTTL	64
+
+#define IPOPT_OPTVAL 0
+#define IPOPT_OLEN   1
+#define IPOPT_OFFSET 2
+#define IPOPT_MINOFF 4
+#define MAX_IPOPTLEN 40
+#define IPOPT_NOP IPOPT_NOOP
+#define IPOPT_EOL IPOPT_END
+#define IPOPT_TS  IPOPT_TIMESTAMP
+
+#define	IPOPT_TS_TSONLY		0		/* timestamps only */
+#define	IPOPT_TS_TSANDADDR	1		/* timestamps and addresses */
+#define	IPOPT_TS_PRESPEC	3		/* specified modules only */
+
+#define IPV4_BEET_PHMAXLEN 8
+
+struct iphdr {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8	ihl:4,
+		version:4;
+#elif defined (__BIG_ENDIAN_BITFIELD)
+	__u8	version:4,
+  		ihl:4;
+#else
+#error	"Please fix <asm/byteorder.h>"
+#endif
+	__u8	tos;
+	__be16	tot_len;
+	__be16	id;
+	__be16	frag_off;
+	__u8	ttl;
+	__u8	protocol;
+	__sum16	check;
+	__be32	saddr;
+	__be32	daddr;
+	/*The options start here. */
+};
+
+
+struct ip_auth_hdr {
+	__u8  nexthdr;
+	__u8  hdrlen;		/* This one is measured in 32 bit units! */
+	__be16 reserved;
+	__be32 spi;
+	__be32 seq_no;		/* Sequence number */
+	__u8  auth_data[0];	/* Variable len but >=4. Mind the 64 bit alignment! */
+};
+
+struct ip_esp_hdr {
+	__be32 spi;
+	__be32 seq_no;		/* Sequence number */
+	__u8  enc_data[0];	/* Variable len but >=8. Mind the 64 bit alignment! */
+};
+
+struct ip_comp_hdr {
+	__u8 nexthdr;
+	__u8 flags;
+	__be16 cpi;
+};
+
+struct ip_beet_phdr {
+	__u8 nexthdr;
+	__u8 hdrlen;
+	__u8 padlen;
+	__u8 reserved;
+};
+
+#endif /* _UAPI_LINUX_IP_H */
diff --git a/include/uapi/linux/ip6_tunnel.h b/include/uapi/linux/ip6_tunnel.h
new file mode 100644
index 00000000000..48af63c9a48
--- /dev/null
+++ b/include/uapi/linux/ip6_tunnel.h
@@ -0,0 +1,51 @@
+#ifndef _IP6_TUNNEL_H
+#define _IP6_TUNNEL_H
+
+#include <linux/types.h>
+
+#define IPV6_TLV_TNL_ENCAP_LIMIT 4
+#define IPV6_DEFAULT_TNL_ENCAP_LIMIT 4
+
+/* don't add encapsulation limit if one isn't present in inner packet */
+#define IP6_TNL_F_IGN_ENCAP_LIMIT 0x1
+/* copy the traffic class field from the inner packet */
+#define IP6_TNL_F_USE_ORIG_TCLASS 0x2
+/* copy the flowlabel from the inner packet */
+#define IP6_TNL_F_USE_ORIG_FLOWLABEL 0x4
+/* being used for Mobile IPv6 */
+#define IP6_TNL_F_MIP6_DEV 0x8
+/* copy DSCP from the outer packet */
+#define IP6_TNL_F_RCV_DSCP_COPY 0x10
+/* copy fwmark from inner packet */
+#define IP6_TNL_F_USE_ORIG_FWMARK 0x20
+
+struct ip6_tnl_parm {
+	char name[IFNAMSIZ];	/* name of tunnel device */
+	int link;		/* ifindex of underlying L2 interface */
+	__u8 proto;		/* tunnel protocol */
+	__u8 encap_limit;	/* encapsulation limit for tunnel */
+	__u8 hop_limit;		/* hop limit for tunnel */
+	__be32 flowinfo;	/* traffic class and flowlabel for tunnel */
+	__u32 flags;		/* tunnel flags */
+	struct in6_addr laddr;	/* local tunnel end-point address */
+	struct in6_addr raddr;	/* remote tunnel end-point address */
+};
+
+struct ip6_tnl_parm2 {
+	char name[IFNAMSIZ];	/* name of tunnel device */
+	int link;		/* ifindex of underlying L2 interface */
+	__u8 proto;		/* tunnel protocol */
+	__u8 encap_limit;	/* encapsulation limit for tunnel */
+	__u8 hop_limit;		/* hop limit for tunnel */
+	__be32 flowinfo;	/* traffic class and flowlabel for tunnel */
+	__u32 flags;		/* tunnel flags */
+	struct in6_addr laddr;	/* local tunnel end-point address */
+	struct in6_addr raddr;	/* remote tunnel end-point address */
+
+	__be16			i_flags;
+	__be16			o_flags;
+	__be32			i_key;
+	__be32			o_key;
+};
+
+#endif
diff --git a/include/uapi/linux/ip_vs.h b/include/uapi/linux/ip_vs.h
new file mode 100644
index 00000000000..8a2d438dc49
--- /dev/null
+++ b/include/uapi/linux/ip_vs.h
@@ -0,0 +1,434 @@
+/*
+ *      IP Virtual Server
+ *      data structure and functionality definitions
+ */
+
+#ifndef _IP_VS_H
+#define _IP_VS_H
+
+#include <linux/types.h>	/* For __beXX types in userland */
+
+#define IP_VS_VERSION_CODE	0x010201
+#define NVERSION(version)			\
+	(version >> 16) & 0xFF,			\
+	(version >> 8) & 0xFF,			\
+	version & 0xFF
+
+/*
+ *      Virtual Service Flags
+ */
+#define IP_VS_SVC_F_PERSISTENT	0x0001		/* persistent port */
+#define IP_VS_SVC_F_HASHED	0x0002		/* hashed entry */
+#define IP_VS_SVC_F_ONEPACKET	0x0004		/* one-packet scheduling */
+
+/*
+ *      Destination Server Flags
+ */
+#define IP_VS_DEST_F_AVAILABLE	0x0001		/* server is available */
+#define IP_VS_DEST_F_OVERLOAD	0x0002		/* server is overloaded */
+
+/*
+ *      IPVS sync daemon states
+ */
+#define IP_VS_STATE_NONE	0x0000		/* daemon is stopped */
+#define IP_VS_STATE_MASTER	0x0001		/* started as master */
+#define IP_VS_STATE_BACKUP	0x0002		/* started as backup */
+
+/*
+ *      IPVS socket options
+ */
+#define IP_VS_BASE_CTL		(64+1024+64)		/* base */
+
+#define IP_VS_SO_SET_NONE	IP_VS_BASE_CTL		/* just peek */
+#define IP_VS_SO_SET_INSERT	(IP_VS_BASE_CTL+1)
+#define IP_VS_SO_SET_ADD	(IP_VS_BASE_CTL+2)
+#define IP_VS_SO_SET_EDIT	(IP_VS_BASE_CTL+3)
+#define IP_VS_SO_SET_DEL	(IP_VS_BASE_CTL+4)
+#define IP_VS_SO_SET_FLUSH	(IP_VS_BASE_CTL+5)
+#define IP_VS_SO_SET_LIST	(IP_VS_BASE_CTL+6)
+#define IP_VS_SO_SET_ADDDEST	(IP_VS_BASE_CTL+7)
+#define IP_VS_SO_SET_DELDEST	(IP_VS_BASE_CTL+8)
+#define IP_VS_SO_SET_EDITDEST	(IP_VS_BASE_CTL+9)
+#define IP_VS_SO_SET_TIMEOUT	(IP_VS_BASE_CTL+10)
+#define IP_VS_SO_SET_STARTDAEMON (IP_VS_BASE_CTL+11)
+#define IP_VS_SO_SET_STOPDAEMON (IP_VS_BASE_CTL+12)
+#define IP_VS_SO_SET_RESTORE    (IP_VS_BASE_CTL+13)
+#define IP_VS_SO_SET_SAVE       (IP_VS_BASE_CTL+14)
+#define IP_VS_SO_SET_ZERO	(IP_VS_BASE_CTL+15)
+#define IP_VS_SO_SET_MAX	IP_VS_SO_SET_ZERO
+
+#define IP_VS_SO_GET_VERSION	IP_VS_BASE_CTL
+#define IP_VS_SO_GET_INFO	(IP_VS_BASE_CTL+1)
+#define IP_VS_SO_GET_SERVICES	(IP_VS_BASE_CTL+2)
+#define IP_VS_SO_GET_SERVICE	(IP_VS_BASE_CTL+3)
+#define IP_VS_SO_GET_DESTS	(IP_VS_BASE_CTL+4)
+#define IP_VS_SO_GET_DEST	(IP_VS_BASE_CTL+5)	/* not used now */
+#define IP_VS_SO_GET_TIMEOUT	(IP_VS_BASE_CTL+6)
+#define IP_VS_SO_GET_DAEMON	(IP_VS_BASE_CTL+7)
+#define IP_VS_SO_GET_MAX	IP_VS_SO_GET_DAEMON
+
+
+/*
+ *      IPVS Connection Flags
+ *      Only flags 0..15 are sent to backup server
+ */
+#define IP_VS_CONN_F_FWD_MASK	0x0007		/* mask for the fwd methods */
+#define IP_VS_CONN_F_MASQ	0x0000		/* masquerading/NAT */
+#define IP_VS_CONN_F_LOCALNODE	0x0001		/* local node */
+#define IP_VS_CONN_F_TUNNEL	0x0002		/* tunneling */
+#define IP_VS_CONN_F_DROUTE	0x0003		/* direct routing */
+#define IP_VS_CONN_F_BYPASS	0x0004		/* cache bypass */
+#define IP_VS_CONN_F_SYNC	0x0020		/* entry created by sync */
+#define IP_VS_CONN_F_HASHED	0x0040		/* hashed entry */
+#define IP_VS_CONN_F_NOOUTPUT	0x0080		/* no output packets */
+#define IP_VS_CONN_F_INACTIVE	0x0100		/* not established */
+#define IP_VS_CONN_F_OUT_SEQ	0x0200		/* must do output seq adjust */
+#define IP_VS_CONN_F_IN_SEQ	0x0400		/* must do input seq adjust */
+#define IP_VS_CONN_F_SEQ_MASK	0x0600		/* in/out sequence mask */
+#define IP_VS_CONN_F_NO_CPORT	0x0800		/* no client port set yet */
+#define IP_VS_CONN_F_TEMPLATE	0x1000		/* template, not connection */
+#define IP_VS_CONN_F_ONE_PACKET	0x2000		/* forward only one packet */
+
+/* Initial bits allowed in backup server */
+#define IP_VS_CONN_F_BACKUP_MASK (IP_VS_CONN_F_FWD_MASK | \
+				  IP_VS_CONN_F_NOOUTPUT | \
+				  IP_VS_CONN_F_INACTIVE | \
+				  IP_VS_CONN_F_SEQ_MASK | \
+				  IP_VS_CONN_F_NO_CPORT | \
+				  IP_VS_CONN_F_TEMPLATE \
+				 )
+
+/* Bits allowed to update in backup server */
+#define IP_VS_CONN_F_BACKUP_UPD_MASK (IP_VS_CONN_F_INACTIVE | \
+				      IP_VS_CONN_F_SEQ_MASK)
+
+/* Flags that are not sent to backup server start from bit 16 */
+#define IP_VS_CONN_F_NFCT	(1 << 16)	/* use netfilter conntrack */
+
+/* Connection flags from destination that can be changed by user space */
+#define IP_VS_CONN_F_DEST_MASK (IP_VS_CONN_F_FWD_MASK | \
+				IP_VS_CONN_F_ONE_PACKET | \
+				IP_VS_CONN_F_NFCT | \
+				0)
+
+#define IP_VS_SCHEDNAME_MAXLEN	16
+#define IP_VS_PENAME_MAXLEN	16
+#define IP_VS_IFNAME_MAXLEN	16
+
+#define IP_VS_PEDATA_MAXLEN     255
+
+/*
+ *	The struct ip_vs_service_user and struct ip_vs_dest_user are
+ *	used to set IPVS rules through setsockopt.
+ */
+struct ip_vs_service_user {
+	/* virtual service addresses */
+	__u16		protocol;
+	__be32			addr;		/* virtual ip address */
+	__be16			port;
+	__u32		fwmark;		/* firwall mark of service */
+
+	/* virtual service options */
+	char			sched_name[IP_VS_SCHEDNAME_MAXLEN];
+	unsigned int		flags;		/* virtual service flags */
+	unsigned int		timeout;	/* persistent timeout in sec */
+	__be32			netmask;	/* persistent netmask */
+};
+
+
+struct ip_vs_dest_user {
+	/* destination server address */
+	__be32			addr;
+	__be16			port;
+
+	/* real server options */
+	unsigned int		conn_flags;	/* connection flags */
+	int			weight;		/* destination weight */
+
+	/* thresholds for active connections */
+	__u32		u_threshold;	/* upper threshold */
+	__u32		l_threshold;	/* lower threshold */
+};
+
+
+/*
+ *	IPVS statistics object (for user space)
+ */
+struct ip_vs_stats_user {
+	__u32                   conns;          /* connections scheduled */
+	__u32                   inpkts;         /* incoming packets */
+	__u32                   outpkts;        /* outgoing packets */
+	__u64                   inbytes;        /* incoming bytes */
+	__u64                   outbytes;       /* outgoing bytes */
+
+	__u32			cps;		/* current connection rate */
+	__u32			inpps;		/* current in packet rate */
+	__u32			outpps;		/* current out packet rate */
+	__u32			inbps;		/* current in byte rate */
+	__u32			outbps;		/* current out byte rate */
+};
+
+
+/* The argument to IP_VS_SO_GET_INFO */
+struct ip_vs_getinfo {
+	/* version number */
+	unsigned int		version;
+
+	/* size of connection hash table */
+	unsigned int		size;
+
+	/* number of virtual services */
+	unsigned int		num_services;
+};
+
+
+/* The argument to IP_VS_SO_GET_SERVICE */
+struct ip_vs_service_entry {
+	/* which service: user fills in these */
+	__u16		protocol;
+	__be32			addr;		/* virtual address */
+	__be16			port;
+	__u32		fwmark;		/* firwall mark of service */
+
+	/* service options */
+	char			sched_name[IP_VS_SCHEDNAME_MAXLEN];
+	unsigned int		flags;          /* virtual service flags */
+	unsigned int		timeout;	/* persistent timeout */
+	__be32			netmask;	/* persistent netmask */
+
+	/* number of real servers */
+	unsigned int		num_dests;
+
+	/* statistics */
+	struct ip_vs_stats_user stats;
+};
+
+
+struct ip_vs_dest_entry {
+	__be32			addr;		/* destination address */
+	__be16			port;
+	unsigned int		conn_flags;	/* connection flags */
+	int			weight;		/* destination weight */
+
+	__u32		u_threshold;	/* upper threshold */
+	__u32		l_threshold;	/* lower threshold */
+
+	__u32		activeconns;	/* active connections */
+	__u32		inactconns;	/* inactive connections */
+	__u32		persistconns;	/* persistent connections */
+
+	/* statistics */
+	struct ip_vs_stats_user stats;
+};
+
+
+/* The argument to IP_VS_SO_GET_DESTS */
+struct ip_vs_get_dests {
+	/* which service: user fills in these */
+	__u16		protocol;
+	__be32			addr;		/* virtual address */
+	__be16			port;
+	__u32		fwmark;		/* firwall mark of service */
+
+	/* number of real servers */
+	unsigned int		num_dests;
+
+	/* the real servers */
+	struct ip_vs_dest_entry	entrytable[0];
+};
+
+
+/* The argument to IP_VS_SO_GET_SERVICES */
+struct ip_vs_get_services {
+	/* number of virtual services */
+	unsigned int		num_services;
+
+	/* service table */
+	struct ip_vs_service_entry entrytable[0];
+};
+
+
+/* The argument to IP_VS_SO_GET_TIMEOUT */
+struct ip_vs_timeout_user {
+	int			tcp_timeout;
+	int			tcp_fin_timeout;
+	int			udp_timeout;
+};
+
+
+/* The argument to IP_VS_SO_GET_DAEMON */
+struct ip_vs_daemon_user {
+	/* sync daemon state (master/backup) */
+	int			state;
+
+	/* multicast interface name */
+	char			mcast_ifn[IP_VS_IFNAME_MAXLEN];
+
+	/* SyncID we belong to */
+	int			syncid;
+};
+
+/*
+ *
+ * IPVS Generic Netlink interface definitions
+ *
+ */
+
+/* Generic Netlink family info */
+
+#define IPVS_GENL_NAME		"IPVS"
+#define IPVS_GENL_VERSION	0x1
+
+struct ip_vs_flags {
+	__be32 flags;
+	__be32 mask;
+};
+
+/* Generic Netlink command attributes */
+enum {
+	IPVS_CMD_UNSPEC = 0,
+
+	IPVS_CMD_NEW_SERVICE,		/* add service */
+	IPVS_CMD_SET_SERVICE,		/* modify service */
+	IPVS_CMD_DEL_SERVICE,		/* delete service */
+	IPVS_CMD_GET_SERVICE,		/* get service info */
+
+	IPVS_CMD_NEW_DEST,		/* add destination */
+	IPVS_CMD_SET_DEST,		/* modify destination */
+	IPVS_CMD_DEL_DEST,		/* delete destination */
+	IPVS_CMD_GET_DEST,		/* get destination info */
+
+	IPVS_CMD_NEW_DAEMON,		/* start sync daemon */
+	IPVS_CMD_DEL_DAEMON,		/* stop sync daemon */
+	IPVS_CMD_GET_DAEMON,		/* get sync daemon status */
+
+	IPVS_CMD_SET_CONFIG,		/* set config settings */
+	IPVS_CMD_GET_CONFIG,		/* get config settings */
+
+	IPVS_CMD_SET_INFO,		/* only used in GET_INFO reply */
+	IPVS_CMD_GET_INFO,		/* get general IPVS info */
+
+	IPVS_CMD_ZERO,			/* zero all counters and stats */
+	IPVS_CMD_FLUSH,			/* flush services and dests */
+
+	__IPVS_CMD_MAX,
+};
+
+#define IPVS_CMD_MAX (__IPVS_CMD_MAX - 1)
+
+/* Attributes used in the first level of commands */
+enum {
+	IPVS_CMD_ATTR_UNSPEC = 0,
+	IPVS_CMD_ATTR_SERVICE,		/* nested service attribute */
+	IPVS_CMD_ATTR_DEST,		/* nested destination attribute */
+	IPVS_CMD_ATTR_DAEMON,		/* nested sync daemon attribute */
+	IPVS_CMD_ATTR_TIMEOUT_TCP,	/* TCP connection timeout */
+	IPVS_CMD_ATTR_TIMEOUT_TCP_FIN,	/* TCP FIN wait timeout */
+	IPVS_CMD_ATTR_TIMEOUT_UDP,	/* UDP timeout */
+	__IPVS_CMD_ATTR_MAX,
+};
+
+#define IPVS_CMD_ATTR_MAX (__IPVS_SVC_ATTR_MAX - 1)
+
+/*
+ * Attributes used to describe a service
+ *
+ * Used inside nested attribute IPVS_CMD_ATTR_SERVICE
+ */
+enum {
+	IPVS_SVC_ATTR_UNSPEC = 0,
+	IPVS_SVC_ATTR_AF,		/* address family */
+	IPVS_SVC_ATTR_PROTOCOL,		/* virtual service protocol */
+	IPVS_SVC_ATTR_ADDR,		/* virtual service address */
+	IPVS_SVC_ATTR_PORT,		/* virtual service port */
+	IPVS_SVC_ATTR_FWMARK,		/* firewall mark of service */
+
+	IPVS_SVC_ATTR_SCHED_NAME,	/* name of scheduler */
+	IPVS_SVC_ATTR_FLAGS,		/* virtual service flags */
+	IPVS_SVC_ATTR_TIMEOUT,		/* persistent timeout */
+	IPVS_SVC_ATTR_NETMASK,		/* persistent netmask */
+
+	IPVS_SVC_ATTR_STATS,		/* nested attribute for service stats */
+
+	IPVS_SVC_ATTR_PE_NAME,		/* name of ct retriever */
+
+	__IPVS_SVC_ATTR_MAX,
+};
+
+#define IPVS_SVC_ATTR_MAX (__IPVS_SVC_ATTR_MAX - 1)
+
+/*
+ * Attributes used to describe a destination (real server)
+ *
+ * Used inside nested attribute IPVS_CMD_ATTR_DEST
+ */
+enum {
+	IPVS_DEST_ATTR_UNSPEC = 0,
+	IPVS_DEST_ATTR_ADDR,		/* real server address */
+	IPVS_DEST_ATTR_PORT,		/* real server port */
+
+	IPVS_DEST_ATTR_FWD_METHOD,	/* forwarding method */
+	IPVS_DEST_ATTR_WEIGHT,		/* destination weight */
+
+	IPVS_DEST_ATTR_U_THRESH,	/* upper threshold */
+	IPVS_DEST_ATTR_L_THRESH,	/* lower threshold */
+
+	IPVS_DEST_ATTR_ACTIVE_CONNS,	/* active connections */
+	IPVS_DEST_ATTR_INACT_CONNS,	/* inactive connections */
+	IPVS_DEST_ATTR_PERSIST_CONNS,	/* persistent connections */
+
+	IPVS_DEST_ATTR_STATS,		/* nested attribute for dest stats */
+	__IPVS_DEST_ATTR_MAX,
+};
+
+#define IPVS_DEST_ATTR_MAX (__IPVS_DEST_ATTR_MAX - 1)
+
+/*
+ * Attributes describing a sync daemon
+ *
+ * Used inside nested attribute IPVS_CMD_ATTR_DAEMON
+ */
+enum {
+	IPVS_DAEMON_ATTR_UNSPEC = 0,
+	IPVS_DAEMON_ATTR_STATE,		/* sync daemon state (master/backup) */
+	IPVS_DAEMON_ATTR_MCAST_IFN,	/* multicast interface name */
+	IPVS_DAEMON_ATTR_SYNC_ID,	/* SyncID we belong to */
+	__IPVS_DAEMON_ATTR_MAX,
+};
+
+#define IPVS_DAEMON_ATTR_MAX (__IPVS_DAEMON_ATTR_MAX - 1)
+
+/*
+ * Attributes used to describe service or destination entry statistics
+ *
+ * Used inside nested attributes IPVS_SVC_ATTR_STATS and IPVS_DEST_ATTR_STATS
+ */
+enum {
+	IPVS_STATS_ATTR_UNSPEC = 0,
+	IPVS_STATS_ATTR_CONNS,		/* connections scheduled */
+	IPVS_STATS_ATTR_INPKTS,		/* incoming packets */
+	IPVS_STATS_ATTR_OUTPKTS,	/* outgoing packets */
+	IPVS_STATS_ATTR_INBYTES,	/* incoming bytes */
+	IPVS_STATS_ATTR_OUTBYTES,	/* outgoing bytes */
+
+	IPVS_STATS_ATTR_CPS,		/* current connection rate */
+	IPVS_STATS_ATTR_INPPS,		/* current in packet rate */
+	IPVS_STATS_ATTR_OUTPPS,		/* current out packet rate */
+	IPVS_STATS_ATTR_INBPS,		/* current in byte rate */
+	IPVS_STATS_ATTR_OUTBPS,		/* current out byte rate */
+	__IPVS_STATS_ATTR_MAX,
+};
+
+#define IPVS_STATS_ATTR_MAX (__IPVS_STATS_ATTR_MAX - 1)
+
+/* Attributes used in response to IPVS_CMD_GET_INFO command */
+enum {
+	IPVS_INFO_ATTR_UNSPEC = 0,
+	IPVS_INFO_ATTR_VERSION,		/* IPVS version number */
+	IPVS_INFO_ATTR_CONN_TAB_SIZE,	/* size of connection hash table */
+	__IPVS_INFO_ATTR_MAX,
+};
+
+#define IPVS_INFO_ATTR_MAX (__IPVS_INFO_ATTR_MAX - 1)
+
+#endif	/* _IP_VS_H */
diff --git a/include/uapi/linux/ipc.h b/include/uapi/linux/ipc.h
new file mode 100644
index 00000000000..de08dd46dda
--- /dev/null
+++ b/include/uapi/linux/ipc.h
@@ -0,0 +1,81 @@
+#ifndef _UAPI_LINUX_IPC_H
+#define _UAPI_LINUX_IPC_H
+
+#include <linux/types.h>
+
+#define IPC_PRIVATE ((__kernel_key_t) 0)  
+
+/* Obsolete, used only for backwards compatibility and libc5 compiles */
+struct ipc_perm
+{
+	__kernel_key_t	key;
+	__kernel_uid_t	uid;
+	__kernel_gid_t	gid;
+	__kernel_uid_t	cuid;
+	__kernel_gid_t	cgid;
+	__kernel_mode_t	mode; 
+	unsigned short	seq;
+};
+
+/* Include the definition of ipc64_perm */
+#include <asm/ipcbuf.h>
+
+/* resource get request flags */
+#define IPC_CREAT  00001000   /* create if key is nonexistent */
+#define IPC_EXCL   00002000   /* fail if key exists */
+#define IPC_NOWAIT 00004000   /* return error on wait */
+
+/* these fields are used by the DIPC package so the kernel as standard
+   should avoid using them if possible */
+   
+#define IPC_DIPC 00010000  /* make it distributed */
+#define IPC_OWN  00020000  /* this machine is the DIPC owner */
+
+/* 
+ * Control commands used with semctl, msgctl and shmctl 
+ * see also specific commands in sem.h, msg.h and shm.h
+ */
+#define IPC_RMID 0     /* remove resource */
+#define IPC_SET  1     /* set ipc_perm options */
+#define IPC_STAT 2     /* get ipc_perm options */
+#define IPC_INFO 3     /* see ipcs */
+
+/*
+ * Version flags for semctl, msgctl, and shmctl commands
+ * These are passed as bitflags or-ed with the actual command
+ */
+#define IPC_OLD 0	/* Old version (no 32-bit UID support on many
+			   architectures) */
+#define IPC_64  0x0100  /* New version (support 32-bit UIDs, bigger
+			   message sizes, etc. */
+
+/*
+ * These are used to wrap system calls.
+ *
+ * See architecture code for ugly details..
+ */
+struct ipc_kludge {
+	struct msgbuf __user *msgp;
+	long msgtyp;
+};
+
+#define SEMOP		 1
+#define SEMGET		 2
+#define SEMCTL		 3
+#define SEMTIMEDOP	 4
+#define MSGSND		11
+#define MSGRCV		12
+#define MSGGET		13
+#define MSGCTL		14
+#define SHMAT		21
+#define SHMDT		22
+#define SHMGET		23
+#define SHMCTL		24
+
+/* Used by the DIPC package, try and avoid reusing it */
+#define DIPC            25
+
+#define IPCCALL(version,op)	((version)<<16 | (op))
+
+
+#endif /* _UAPI_LINUX_IPC_H */
diff --git a/include/uapi/linux/ipmi.h b/include/uapi/linux/ipmi.h
new file mode 100644
index 00000000000..33fbc99b381
--- /dev/null
+++ b/include/uapi/linux/ipmi.h
@@ -0,0 +1,456 @@
+/*
+ * ipmi.h
+ *
+ * MontaVista IPMI interface
+ *
+ * Author: MontaVista Software, Inc.
+ *         Corey Minyard <minyard@mvista.com>
+ *         source@mvista.com
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation; either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _UAPI__LINUX_IPMI_H
+#define _UAPI__LINUX_IPMI_H
+
+#include <linux/ipmi_msgdefs.h>
+#include <linux/compiler.h>
+
+/*
+ * This file describes an interface to an IPMI driver.  You have to
+ * have a fairly good understanding of IPMI to use this, so go read
+ * the specs first before actually trying to do anything.
+ *
+ * With that said, this driver provides a multi-user interface to the
+ * IPMI driver, and it allows multiple IPMI physical interfaces below
+ * the driver.  The physical interfaces bind as a lower layer on the
+ * driver.  They appear as interfaces to the application using this
+ * interface.
+ *
+ * Multi-user means that multiple applications may use the driver,
+ * send commands, receive responses, etc.  The driver keeps track of
+ * commands the user sends and tracks the responses.  The responses
+ * will go back to the application that send the command.  If the
+ * response doesn't come back in time, the driver will return a
+ * timeout error response to the application.  Asynchronous events
+ * from the BMC event queue will go to all users bound to the driver.
+ * The incoming event queue in the BMC will automatically be flushed
+ * if it becomes full and it is queried once a second to see if
+ * anything is in it.  Incoming commands to the driver will get
+ * delivered as commands.
+ *
+ * This driver provides two main interfaces: one for in-kernel
+ * applications and another for userland applications.  The
+ * capabilities are basically the same for both interface, although
+ * the interfaces are somewhat different.  The stuff in the
+ * #ifdef __KERNEL__ below is the in-kernel interface.  The userland
+ * interface is defined later in the file.  */
+
+
+
+/*
+ * This is an overlay for all the address types, so it's easy to
+ * determine the actual address type.  This is kind of like addresses
+ * work for sockets.
+ */
+#define IPMI_MAX_ADDR_SIZE 32
+struct ipmi_addr {
+	 /* Try to take these from the "Channel Medium Type" table
+	    in section 6.5 of the IPMI 1.5 manual. */
+	int   addr_type;
+	short channel;
+	char  data[IPMI_MAX_ADDR_SIZE];
+};
+
+/*
+ * When the address is not used, the type will be set to this value.
+ * The channel is the BMC's channel number for the channel (usually
+ * 0), or IPMC_BMC_CHANNEL if communicating directly with the BMC.
+ */
+#define IPMI_SYSTEM_INTERFACE_ADDR_TYPE	0x0c
+struct ipmi_system_interface_addr {
+	int           addr_type;
+	short         channel;
+	unsigned char lun;
+};
+
+/* An IPMB Address. */
+#define IPMI_IPMB_ADDR_TYPE		0x01
+/* Used for broadcast get device id as described in section 17.9 of the
+   IPMI 1.5 manual. */
+#define IPMI_IPMB_BROADCAST_ADDR_TYPE	0x41
+struct ipmi_ipmb_addr {
+	int           addr_type;
+	short         channel;
+	unsigned char slave_addr;
+	unsigned char lun;
+};
+
+/*
+ * A LAN Address.  This is an address to/from a LAN interface bridged
+ * by the BMC, not an address actually out on the LAN.
+ *
+ * A conscious decision was made here to deviate slightly from the IPMI
+ * spec.  We do not use rqSWID and rsSWID like it shows in the
+ * message.  Instead, we use remote_SWID and local_SWID.  This means
+ * that any message (a request or response) from another device will
+ * always have exactly the same address.  If you didn't do this,
+ * requests and responses from the same device would have different
+ * addresses, and that's not too cool.
+ *
+ * In this address, the remote_SWID is always the SWID the remote
+ * message came from, or the SWID we are sending the message to.
+ * local_SWID is always our SWID.  Note that having our SWID in the
+ * message is a little weird, but this is required.
+ */
+#define IPMI_LAN_ADDR_TYPE		0x04
+struct ipmi_lan_addr {
+	int           addr_type;
+	short         channel;
+	unsigned char privilege;
+	unsigned char session_handle;
+	unsigned char remote_SWID;
+	unsigned char local_SWID;
+	unsigned char lun;
+};
+
+
+/*
+ * Channel for talking directly with the BMC.  When using this
+ * channel, This is for the system interface address type only.  FIXME
+ * - is this right, or should we use -1?
+ */
+#define IPMI_BMC_CHANNEL  0xf
+#define IPMI_NUM_CHANNELS 0x10
+
+/*
+ * Used to signify an "all channel" bitmask.  This is more than the
+ * actual number of channels because this is used in userland and
+ * will cover us if the number of channels is extended.
+ */
+#define IPMI_CHAN_ALL     (~0)
+
+
+/*
+ * A raw IPMI message without any addressing.  This covers both
+ * commands and responses.  The completion code is always the first
+ * byte of data in the response (as the spec shows the messages laid
+ * out).
+ */
+struct ipmi_msg {
+	unsigned char  netfn;
+	unsigned char  cmd;
+	unsigned short data_len;
+	unsigned char  __user *data;
+};
+
+struct kernel_ipmi_msg {
+	unsigned char  netfn;
+	unsigned char  cmd;
+	unsigned short data_len;
+	unsigned char  *data;
+};
+
+/*
+ * Various defines that are useful for IPMI applications.
+ */
+#define IPMI_INVALID_CMD_COMPLETION_CODE	0xC1
+#define IPMI_TIMEOUT_COMPLETION_CODE		0xC3
+#define IPMI_UNKNOWN_ERR_COMPLETION_CODE	0xff
+
+
+/*
+ * Receive types for messages coming from the receive interface.  This
+ * is used for the receive in-kernel interface and in the receive
+ * IOCTL.
+ *
+ * The "IPMI_RESPONSE_RESPNOSE_TYPE" is a little strange sounding, but
+ * it allows you to get the message results when you send a response
+ * message.
+ */
+#define IPMI_RESPONSE_RECV_TYPE		1 /* A response to a command */
+#define IPMI_ASYNC_EVENT_RECV_TYPE	2 /* Something from the event queue */
+#define IPMI_CMD_RECV_TYPE		3 /* A command from somewhere else */
+#define IPMI_RESPONSE_RESPONSE_TYPE	4 /* The response for
+					      a sent response, giving any
+					      error status for sending the
+					      response.  When you send a
+					      response message, this will
+					      be returned. */
+#define IPMI_OEM_RECV_TYPE		5 /* The response for OEM Channels */
+
+/* Note that async events and received commands do not have a completion
+   code as the first byte of the incoming data, unlike a response. */
+
+
+/*
+ * Modes for ipmi_set_maint_mode() and the userland IOCTL.  The AUTO
+ * setting is the default and means it will be set on certain
+ * commands.  Hard setting it on and off will override automatic
+ * operation.
+ */
+#define IPMI_MAINTENANCE_MODE_AUTO	0
+#define IPMI_MAINTENANCE_MODE_OFF	1
+#define IPMI_MAINTENANCE_MODE_ON	2
+
+
+
+/*
+ * The userland interface
+ */
+
+/*
+ * The userland interface for the IPMI driver is a standard character
+ * device, with each instance of an interface registered as a minor
+ * number under the major character device.
+ *
+ * The read and write calls do not work, to get messages in and out
+ * requires ioctl calls because of the complexity of the data.  select
+ * and poll do work, so you can wait for input using the file
+ * descriptor, you just can use read to get it.
+ *
+ * In general, you send a command down to the interface and receive
+ * responses back.  You can use the msgid value to correlate commands
+ * and responses, the driver will take care of figuring out which
+ * incoming messages are for which command and find the proper msgid
+ * value to report.  You will only receive reponses for commands you
+ * send.  Asynchronous events, however, go to all open users, so you
+ * must be ready to handle these (or ignore them if you don't care).
+ *
+ * The address type depends upon the channel type.  When talking
+ * directly to the BMC (IPMC_BMC_CHANNEL), the address is ignored
+ * (IPMI_UNUSED_ADDR_TYPE).  When talking to an IPMB channel, you must
+ * supply a valid IPMB address with the addr_type set properly.
+ *
+ * When talking to normal channels, the driver takes care of the
+ * details of formatting and sending messages on that channel.  You do
+ * not, for instance, have to format a send command, you just send
+ * whatever command you want to the channel, the driver will create
+ * the send command, automatically issue receive command and get even
+ * commands, and pass those up to the proper user.
+ */
+
+
+/* The magic IOCTL value for this interface. */
+#define IPMI_IOC_MAGIC 'i'
+
+
+/* Messages sent to the interface are this format. */
+struct ipmi_req {
+	unsigned char __user *addr; /* Address to send the message to. */
+	unsigned int  addr_len;
+
+	long    msgid; /* The sequence number for the message.  This
+			  exact value will be reported back in the
+			  response to this request if it is a command.
+			  If it is a response, this will be used as
+			  the sequence value for the response.  */
+
+	struct ipmi_msg msg;
+};
+/*
+ * Send a message to the interfaces.  error values are:
+ *   - EFAULT - an address supplied was invalid.
+ *   - EINVAL - The address supplied was not valid, or the command
+ *              was not allowed.
+ *   - EMSGSIZE - The message to was too large.
+ *   - ENOMEM - Buffers could not be allocated for the command.
+ */
+#define IPMICTL_SEND_COMMAND		_IOR(IPMI_IOC_MAGIC, 13,	\
+					     struct ipmi_req)
+
+/* Messages sent to the interface with timing parameters are this
+   format. */
+struct ipmi_req_settime {
+	struct ipmi_req req;
+
+	/* See ipmi_request_settime() above for details on these
+	   values. */
+	int          retries;
+	unsigned int retry_time_ms;
+};
+/*
+ * Send a message to the interfaces with timing parameters.  error values
+ * are:
+ *   - EFAULT - an address supplied was invalid.
+ *   - EINVAL - The address supplied was not valid, or the command
+ *              was not allowed.
+ *   - EMSGSIZE - The message to was too large.
+ *   - ENOMEM - Buffers could not be allocated for the command.
+ */
+#define IPMICTL_SEND_COMMAND_SETTIME	_IOR(IPMI_IOC_MAGIC, 21,	\
+					     struct ipmi_req_settime)
+
+/* Messages received from the interface are this format. */
+struct ipmi_recv {
+	int     recv_type; /* Is this a command, response or an
+			      asyncronous event. */
+
+	unsigned char __user *addr;    /* Address the message was from is put
+				   here.  The caller must supply the
+				   memory. */
+	unsigned int  addr_len; /* The size of the address buffer.
+				   The caller supplies the full buffer
+				   length, this value is updated to
+				   the actual message length when the
+				   message is received. */
+
+	long    msgid; /* The sequence number specified in the request
+			  if this is a response.  If this is a command,
+			  this will be the sequence number from the
+			  command. */
+
+	struct ipmi_msg msg; /* The data field must point to a buffer.
+				The data_size field must be set to the
+				size of the message buffer.  The
+				caller supplies the full buffer
+				length, this value is updated to the
+				actual message length when the message
+				is received. */
+};
+
+/*
+ * Receive a message.  error values:
+ *  - EAGAIN - no messages in the queue.
+ *  - EFAULT - an address supplied was invalid.
+ *  - EINVAL - The address supplied was not valid.
+ *  - EMSGSIZE - The message to was too large to fit into the message buffer,
+ *               the message will be left in the buffer. */
+#define IPMICTL_RECEIVE_MSG		_IOWR(IPMI_IOC_MAGIC, 12,	\
+					      struct ipmi_recv)
+
+/*
+ * Like RECEIVE_MSG, but if the message won't fit in the buffer, it
+ * will truncate the contents instead of leaving the data in the
+ * buffer.
+ */
+#define IPMICTL_RECEIVE_MSG_TRUNC	_IOWR(IPMI_IOC_MAGIC, 11,	\
+					      struct ipmi_recv)
+
+/* Register to get commands from other entities on this interface. */
+struct ipmi_cmdspec {
+	unsigned char netfn;
+	unsigned char cmd;
+};
+
+/*
+ * Register to receive a specific command.  error values:
+ *   - EFAULT - an address supplied was invalid.
+ *   - EBUSY - The netfn/cmd supplied was already in use.
+ *   - ENOMEM - could not allocate memory for the entry.
+ */
+#define IPMICTL_REGISTER_FOR_CMD	_IOR(IPMI_IOC_MAGIC, 14,	\
+					     struct ipmi_cmdspec)
+/*
+ * Unregister a regsitered command.  error values:
+ *  - EFAULT - an address supplied was invalid.
+ *  - ENOENT - The netfn/cmd was not found registered for this user.
+ */
+#define IPMICTL_UNREGISTER_FOR_CMD	_IOR(IPMI_IOC_MAGIC, 15,	\
+					     struct ipmi_cmdspec)
+
+/*
+ * Register to get commands from other entities on specific channels.
+ * This way, you can only listen on specific channels, or have messages
+ * from some channels go to one place and other channels to someplace
+ * else.  The chans field is a bitmask, (1 << channel) for each channel.
+ * It may be IPMI_CHAN_ALL for all channels.
+ */
+struct ipmi_cmdspec_chans {
+	unsigned int netfn;
+	unsigned int cmd;
+	unsigned int chans;
+};
+
+/*
+ * Register to receive a specific command on specific channels.  error values:
+ *   - EFAULT - an address supplied was invalid.
+ *   - EBUSY - One of the netfn/cmd/chans supplied was already in use.
+ *   - ENOMEM - could not allocate memory for the entry.
+ */
+#define IPMICTL_REGISTER_FOR_CMD_CHANS	_IOR(IPMI_IOC_MAGIC, 28,	\
+					     struct ipmi_cmdspec_chans)
+/*
+ * Unregister some netfn/cmd/chans.  error values:
+ *  - EFAULT - an address supplied was invalid.
+ *  - ENOENT - None of the netfn/cmd/chans were found registered for this user.
+ */
+#define IPMICTL_UNREGISTER_FOR_CMD_CHANS _IOR(IPMI_IOC_MAGIC, 29,	\
+					     struct ipmi_cmdspec_chans)
+
+/*
+ * Set whether this interface receives events.  Note that the first
+ * user registered for events will get all pending events for the
+ * interface.  error values:
+ *  - EFAULT - an address supplied was invalid.
+ */
+#define IPMICTL_SET_GETS_EVENTS_CMD	_IOR(IPMI_IOC_MAGIC, 16, int)
+
+/*
+ * Set and get the slave address and LUN that we will use for our
+ * source messages.  Note that this affects the interface, not just
+ * this user, so it will affect all users of this interface.  This is
+ * so some initialization code can come in and do the OEM-specific
+ * things it takes to determine your address (if not the BMC) and set
+ * it for everyone else.  You should probably leave the LUN alone.
+ */
+struct ipmi_channel_lun_address_set {
+	unsigned short channel;
+	unsigned char  value;
+};
+#define IPMICTL_SET_MY_CHANNEL_ADDRESS_CMD \
+	_IOR(IPMI_IOC_MAGIC, 24, struct ipmi_channel_lun_address_set)
+#define IPMICTL_GET_MY_CHANNEL_ADDRESS_CMD \
+	_IOR(IPMI_IOC_MAGIC, 25, struct ipmi_channel_lun_address_set)
+#define IPMICTL_SET_MY_CHANNEL_LUN_CMD \
+	_IOR(IPMI_IOC_MAGIC, 26, struct ipmi_channel_lun_address_set)
+#define IPMICTL_GET_MY_CHANNEL_LUN_CMD \
+	_IOR(IPMI_IOC_MAGIC, 27, struct ipmi_channel_lun_address_set)
+/* Legacy interfaces, these only set IPMB 0. */
+#define IPMICTL_SET_MY_ADDRESS_CMD	_IOR(IPMI_IOC_MAGIC, 17, unsigned int)
+#define IPMICTL_GET_MY_ADDRESS_CMD	_IOR(IPMI_IOC_MAGIC, 18, unsigned int)
+#define IPMICTL_SET_MY_LUN_CMD		_IOR(IPMI_IOC_MAGIC, 19, unsigned int)
+#define IPMICTL_GET_MY_LUN_CMD		_IOR(IPMI_IOC_MAGIC, 20, unsigned int)
+
+/*
+ * Get/set the default timing values for an interface.  You shouldn't
+ * generally mess with these.
+ */
+struct ipmi_timing_parms {
+	int          retries;
+	unsigned int retry_time_ms;
+};
+#define IPMICTL_SET_TIMING_PARMS_CMD	_IOR(IPMI_IOC_MAGIC, 22, \
+					     struct ipmi_timing_parms)
+#define IPMICTL_GET_TIMING_PARMS_CMD	_IOR(IPMI_IOC_MAGIC, 23, \
+					     struct ipmi_timing_parms)
+
+/*
+ * Set the maintenance mode.  See ipmi_set_maintenance_mode() above
+ * for a description of what this does.
+ */
+#define IPMICTL_GET_MAINTENANCE_MODE_CMD	_IOR(IPMI_IOC_MAGIC, 30, int)
+#define IPMICTL_SET_MAINTENANCE_MODE_CMD	_IOW(IPMI_IOC_MAGIC, 31, int)
+
+#endif /* _UAPI__LINUX_IPMI_H */
diff --git a/include/uapi/linux/ipmi_msgdefs.h b/include/uapi/linux/ipmi_msgdefs.h
new file mode 100644
index 00000000000..df97e6e31e8
--- /dev/null
+++ b/include/uapi/linux/ipmi_msgdefs.h
@@ -0,0 +1,121 @@
+/*
+ * ipmi_smi.h
+ *
+ * MontaVista IPMI system management interface
+ *
+ * Author: MontaVista Software, Inc.
+ *         Corey Minyard <minyard@mvista.com>
+ *         source@mvista.com
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation; either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_IPMI_MSGDEFS_H
+#define __LINUX_IPMI_MSGDEFS_H
+
+/* Various definitions for IPMI messages used by almost everything in
+   the IPMI stack. */
+
+/* NetFNs and commands used inside the IPMI stack. */
+
+#define IPMI_NETFN_SENSOR_EVENT_REQUEST		0x04
+#define IPMI_NETFN_SENSOR_EVENT_RESPONSE	0x05
+#define IPMI_GET_EVENT_RECEIVER_CMD	0x01
+
+#define IPMI_NETFN_APP_REQUEST			0x06
+#define IPMI_NETFN_APP_RESPONSE			0x07
+#define IPMI_GET_DEVICE_ID_CMD		0x01
+#define IPMI_COLD_RESET_CMD		0x02
+#define IPMI_WARM_RESET_CMD		0x03
+#define IPMI_CLEAR_MSG_FLAGS_CMD	0x30
+#define IPMI_GET_DEVICE_GUID_CMD	0x08
+#define IPMI_GET_MSG_FLAGS_CMD		0x31
+#define IPMI_SEND_MSG_CMD		0x34
+#define IPMI_GET_MSG_CMD		0x33
+#define IPMI_SET_BMC_GLOBAL_ENABLES_CMD	0x2e
+#define IPMI_GET_BMC_GLOBAL_ENABLES_CMD	0x2f
+#define IPMI_READ_EVENT_MSG_BUFFER_CMD	0x35
+#define IPMI_GET_CHANNEL_INFO_CMD	0x42
+
+/* Bit for BMC global enables. */
+#define IPMI_BMC_RCV_MSG_INTR     0x01
+#define IPMI_BMC_EVT_MSG_INTR     0x02
+#define IPMI_BMC_EVT_MSG_BUFF     0x04
+#define IPMI_BMC_SYS_LOG          0x08
+
+#define IPMI_NETFN_STORAGE_REQUEST		0x0a
+#define IPMI_NETFN_STORAGE_RESPONSE		0x0b
+#define IPMI_ADD_SEL_ENTRY_CMD		0x44
+
+#define IPMI_NETFN_FIRMWARE_REQUEST		0x08
+#define IPMI_NETFN_FIRMWARE_RESPONSE		0x09
+
+/* The default slave address */
+#define IPMI_BMC_SLAVE_ADDR	0x20
+
+/* The BT interface on high-end HP systems supports up to 255 bytes in
+ * one transfer.  Its "virtual" BMC supports some commands that are longer
+ * than 128 bytes.  Use the full 256, plus NetFn/LUN, Cmd, cCode, plus
+ * some overhead; it's not worth the effort to dynamically size this based
+ * on the results of the "Get BT Capabilities" command. */
+#define IPMI_MAX_MSG_LENGTH	272	/* multiple of 16 */
+
+#define IPMI_CC_NO_ERROR		0x00
+#define IPMI_NODE_BUSY_ERR		0xc0
+#define IPMI_INVALID_COMMAND_ERR	0xc1
+#define IPMI_TIMEOUT_ERR		0xc3
+#define IPMI_ERR_MSG_TRUNCATED		0xc6
+#define IPMI_REQ_LEN_INVALID_ERR	0xc7
+#define IPMI_REQ_LEN_EXCEEDED_ERR	0xc8
+#define IPMI_NOT_IN_MY_STATE_ERR	0xd5	/* IPMI 2.0 */
+#define IPMI_LOST_ARBITRATION_ERR	0x81
+#define IPMI_BUS_ERR			0x82
+#define IPMI_NAK_ON_WRITE_ERR		0x83
+#define IPMI_ERR_UNSPECIFIED		0xff
+
+#define IPMI_CHANNEL_PROTOCOL_IPMB	1
+#define IPMI_CHANNEL_PROTOCOL_ICMB	2
+#define IPMI_CHANNEL_PROTOCOL_SMBUS	4
+#define IPMI_CHANNEL_PROTOCOL_KCS	5
+#define IPMI_CHANNEL_PROTOCOL_SMIC	6
+#define IPMI_CHANNEL_PROTOCOL_BT10	7
+#define IPMI_CHANNEL_PROTOCOL_BT15	8
+#define IPMI_CHANNEL_PROTOCOL_TMODE	9
+
+#define IPMI_CHANNEL_MEDIUM_IPMB	1
+#define IPMI_CHANNEL_MEDIUM_ICMB10	2
+#define IPMI_CHANNEL_MEDIUM_ICMB09	3
+#define IPMI_CHANNEL_MEDIUM_8023LAN	4
+#define IPMI_CHANNEL_MEDIUM_ASYNC	5
+#define IPMI_CHANNEL_MEDIUM_OTHER_LAN	6
+#define IPMI_CHANNEL_MEDIUM_PCI_SMBUS	7
+#define IPMI_CHANNEL_MEDIUM_SMBUS1	8
+#define IPMI_CHANNEL_MEDIUM_SMBUS2	9
+#define IPMI_CHANNEL_MEDIUM_USB1	10
+#define IPMI_CHANNEL_MEDIUM_USB2	11
+#define IPMI_CHANNEL_MEDIUM_SYSINTF	12
+#define IPMI_CHANNEL_MEDIUM_OEM_MIN	0x60
+#define IPMI_CHANNEL_MEDIUM_OEM_MAX	0x7f
+
+#endif /* __LINUX_IPMI_MSGDEFS_H */
diff --git a/include/uapi/linux/ipsec.h b/include/uapi/linux/ipsec.h
new file mode 100644
index 00000000000..d17a6302a0e
--- /dev/null
+++ b/include/uapi/linux/ipsec.h
@@ -0,0 +1,47 @@
+#ifndef _LINUX_IPSEC_H
+#define _LINUX_IPSEC_H
+
+/* The definitions, required to talk to KAME racoon IKE. */
+
+#include <linux/pfkeyv2.h>
+
+#define IPSEC_PORT_ANY		0
+#define IPSEC_ULPROTO_ANY	255
+#define IPSEC_PROTO_ANY		255
+
+enum {
+	IPSEC_MODE_ANY		= 0,	/* We do not support this for SA */
+	IPSEC_MODE_TRANSPORT	= 1,
+	IPSEC_MODE_TUNNEL	= 2,
+	IPSEC_MODE_BEET         = 3
+};
+
+enum {
+	IPSEC_DIR_ANY		= 0,
+	IPSEC_DIR_INBOUND	= 1,
+	IPSEC_DIR_OUTBOUND	= 2,
+	IPSEC_DIR_FWD		= 3,	/* It is our own */
+	IPSEC_DIR_MAX		= 4,
+	IPSEC_DIR_INVALID	= 5
+};
+
+enum {
+	IPSEC_POLICY_DISCARD	= 0,
+	IPSEC_POLICY_NONE	= 1,
+	IPSEC_POLICY_IPSEC	= 2,
+	IPSEC_POLICY_ENTRUST	= 3,
+	IPSEC_POLICY_BYPASS	= 4
+};
+
+enum {
+	IPSEC_LEVEL_DEFAULT	= 0,
+	IPSEC_LEVEL_USE		= 1,
+	IPSEC_LEVEL_REQUIRE	= 2,
+	IPSEC_LEVEL_UNIQUE	= 3
+};
+
+#define IPSEC_MANUAL_REQID_MAX	0x3fff
+
+#define IPSEC_REPLAYWSIZE  32
+
+#endif	/* _LINUX_IPSEC_H */
diff --git a/include/uapi/linux/ipv6.h b/include/uapi/linux/ipv6.h
new file mode 100644
index 00000000000..a6d7d1c536c
--- /dev/null
+++ b/include/uapi/linux/ipv6.h
@@ -0,0 +1,164 @@
+#ifndef _UAPI_IPV6_H
+#define _UAPI_IPV6_H
+
+#include <linux/types.h>
+#include <linux/in6.h>
+#include <asm/byteorder.h>
+
+/* The latest drafts declared increase in minimal mtu up to 1280. */
+
+#define IPV6_MIN_MTU	1280
+
+/*
+ *	Advanced API
+ *	source interface/address selection, source routing, etc...
+ *	*under construction*
+ */
+
+
+struct in6_pktinfo {
+	struct in6_addr	ipi6_addr;
+	int		ipi6_ifindex;
+};
+
+struct ip6_mtuinfo {
+	struct sockaddr_in6	ip6m_addr;
+	__u32			ip6m_mtu;
+};
+
+struct in6_ifreq {
+	struct in6_addr	ifr6_addr;
+	__u32		ifr6_prefixlen;
+	int		ifr6_ifindex; 
+};
+
+#define IPV6_SRCRT_STRICT	0x01	/* Deprecated; will be removed */
+#define IPV6_SRCRT_TYPE_0	0	/* Deprecated; will be removed */
+#define IPV6_SRCRT_TYPE_2	2	/* IPv6 type 2 Routing Header	*/
+
+/*
+ *	routing header
+ */
+struct ipv6_rt_hdr {
+	__u8		nexthdr;
+	__u8		hdrlen;
+	__u8		type;
+	__u8		segments_left;
+
+	/*
+	 *	type specific data
+	 *	variable length field
+	 */
+};
+
+
+struct ipv6_opt_hdr {
+	__u8 		nexthdr;
+	__u8 		hdrlen;
+	/* 
+	 * TLV encoded option data follows.
+	 */
+} __attribute__((packed));	/* required for some archs */
+
+#define ipv6_destopt_hdr ipv6_opt_hdr
+#define ipv6_hopopt_hdr  ipv6_opt_hdr
+
+
+/*
+ *	routing header type 0 (used in cmsghdr struct)
+ */
+
+struct rt0_hdr {
+	struct ipv6_rt_hdr	rt_hdr;
+	__u32			reserved;
+	struct in6_addr		addr[0];
+
+#define rt0_type		rt_hdr.type
+};
+
+/*
+ *	routing header type 2
+ */
+
+struct rt2_hdr {
+	struct ipv6_rt_hdr	rt_hdr;
+	__u32			reserved;
+	struct in6_addr		addr;
+
+#define rt2_type		rt_hdr.type
+};
+
+/*
+ *	home address option in destination options header
+ */
+
+struct ipv6_destopt_hao {
+	__u8			type;
+	__u8			length;
+	struct in6_addr		addr;
+} __attribute__((packed));
+
+/*
+ *	IPv6 fixed header
+ *
+ *	BEWARE, it is incorrect. The first 4 bits of flow_lbl
+ *	are glued to priority now, forming "class".
+ */
+
+struct ipv6hdr {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8			priority:4,
+				version:4;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	__u8			version:4,
+				priority:4;
+#else
+#error	"Please fix <asm/byteorder.h>"
+#endif
+	__u8			flow_lbl[3];
+
+	__be16			payload_len;
+	__u8			nexthdr;
+	__u8			hop_limit;
+
+	struct	in6_addr	saddr;
+	struct	in6_addr	daddr;
+};
+
+
+/* index values for the variables in ipv6_devconf */
+enum {
+	DEVCONF_FORWARDING = 0,
+	DEVCONF_HOPLIMIT,
+	DEVCONF_MTU6,
+	DEVCONF_ACCEPT_RA,
+	DEVCONF_ACCEPT_REDIRECTS,
+	DEVCONF_AUTOCONF,
+	DEVCONF_DAD_TRANSMITS,
+	DEVCONF_RTR_SOLICITS,
+	DEVCONF_RTR_SOLICIT_INTERVAL,
+	DEVCONF_RTR_SOLICIT_DELAY,
+	DEVCONF_USE_TEMPADDR,
+	DEVCONF_TEMP_VALID_LFT,
+	DEVCONF_TEMP_PREFERED_LFT,
+	DEVCONF_REGEN_MAX_RETRY,
+	DEVCONF_MAX_DESYNC_FACTOR,
+	DEVCONF_MAX_ADDRESSES,
+	DEVCONF_FORCE_MLD_VERSION,
+	DEVCONF_ACCEPT_RA_DEFRTR,
+	DEVCONF_ACCEPT_RA_PINFO,
+	DEVCONF_ACCEPT_RA_RTR_PREF,
+	DEVCONF_RTR_PROBE_INTERVAL,
+	DEVCONF_ACCEPT_RA_RT_INFO_MAX_PLEN,
+	DEVCONF_PROXY_NDP,
+	DEVCONF_OPTIMISTIC_DAD,
+	DEVCONF_ACCEPT_SOURCE_ROUTE,
+	DEVCONF_MC_FORWARDING,
+	DEVCONF_DISABLE_IPV6,
+	DEVCONF_ACCEPT_DAD,
+	DEVCONF_FORCE_TLLAO,
+	DEVCONF_MAX
+};
+
+
+#endif /* _UAPI_IPV6_H */
diff --git a/include/uapi/linux/ipv6_route.h b/include/uapi/linux/ipv6_route.h
new file mode 100644
index 00000000000..0459664c263
--- /dev/null
+++ b/include/uapi/linux/ipv6_route.h
@@ -0,0 +1,58 @@
+/*
+ *	Linux INET6 implementation 
+ *
+ *	Authors:
+ *	Pedro Roque		<roque@di.fc.ul.pt>	
+ *
+ *	This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _UAPI_LINUX_IPV6_ROUTE_H
+#define _UAPI_LINUX_IPV6_ROUTE_H
+
+#include <linux/types.h>
+
+#define RTF_DEFAULT	0x00010000	/* default - learned via ND	*/
+#define RTF_ALLONLINK	0x00020000	/* (deprecated and will be removed)
+					   fallback, no routers on link */
+#define RTF_ADDRCONF	0x00040000	/* addrconf route - RA		*/
+#define RTF_PREFIX_RT	0x00080000	/* A prefix only route - RA	*/
+#define RTF_ANYCAST	0x00100000	/* Anycast			*/
+
+#define RTF_NONEXTHOP	0x00200000	/* route with no nexthop	*/
+#define RTF_EXPIRES	0x00400000
+
+#define RTF_ROUTEINFO	0x00800000	/* route information - RA	*/
+
+#define RTF_CACHE	0x01000000	/* cache entry			*/
+#define RTF_FLOW	0x02000000	/* flow significant route	*/
+#define RTF_POLICY	0x04000000	/* policy route			*/
+
+#define RTF_PREF(pref)	((pref) << 27)
+#define RTF_PREF_MASK	0x18000000
+
+#define RTF_LOCAL	0x80000000
+
+
+struct in6_rtmsg {
+	struct in6_addr		rtmsg_dst;
+	struct in6_addr		rtmsg_src;
+	struct in6_addr		rtmsg_gateway;
+	__u32			rtmsg_type;
+	__u16			rtmsg_dst_len;
+	__u16			rtmsg_src_len;
+	__u32			rtmsg_metric;
+	unsigned long		rtmsg_info;
+        __u32			rtmsg_flags;
+	int			rtmsg_ifindex;
+};
+
+#define RTMSG_NEWDEVICE		0x11
+#define RTMSG_DELDEVICE		0x12
+#define RTMSG_NEWROUTE		0x21
+#define RTMSG_DELROUTE		0x22
+
+#endif /* _UAPI_LINUX_IPV6_ROUTE_H */
diff --git a/include/uapi/linux/ipx.h b/include/uapi/linux/ipx.h
new file mode 100644
index 00000000000..3d48014cdd7
--- /dev/null
+++ b/include/uapi/linux/ipx.h
@@ -0,0 +1,75 @@
+#ifndef _IPX_H_
+#define _IPX_H_
+#include <linux/types.h>
+#include <linux/sockios.h>
+#include <linux/socket.h>
+#define IPX_NODE_LEN	6
+#define IPX_MTU		576
+
+struct sockaddr_ipx {
+	__kernel_sa_family_t sipx_family;
+	__be16		sipx_port;
+	__be32		sipx_network;
+	unsigned char 	sipx_node[IPX_NODE_LEN];
+	__u8		sipx_type;
+	unsigned char	sipx_zero;	/* 16 byte fill */
+};
+
+/*
+ * So we can fit the extra info for SIOCSIFADDR into the address nicely
+ */
+#define sipx_special	sipx_port
+#define sipx_action	sipx_zero
+#define IPX_DLTITF	0
+#define IPX_CRTITF	1
+
+struct ipx_route_definition {
+	__be32        ipx_network;
+	__be32        ipx_router_network;
+	unsigned char ipx_router_node[IPX_NODE_LEN];
+};
+
+struct ipx_interface_definition {
+	__be32        ipx_network;
+	unsigned char ipx_device[16];
+	unsigned char ipx_dlink_type;
+#define IPX_FRAME_NONE		0
+#define IPX_FRAME_SNAP		1
+#define IPX_FRAME_8022		2
+#define IPX_FRAME_ETHERII	3
+#define IPX_FRAME_8023		4
+#define IPX_FRAME_TR_8022       5 /* obsolete */
+	unsigned char ipx_special;
+#define IPX_SPECIAL_NONE	0
+#define IPX_PRIMARY		1
+#define IPX_INTERNAL		2
+	unsigned char ipx_node[IPX_NODE_LEN];
+};
+	
+struct ipx_config_data {
+	unsigned char	ipxcfg_auto_select_primary;
+	unsigned char	ipxcfg_auto_create_interfaces;
+};
+
+/*
+ * OLD Route Definition for backward compatibility.
+ */
+
+struct ipx_route_def {
+	__be32		ipx_network;
+	__be32		ipx_router_network;
+#define IPX_ROUTE_NO_ROUTER	0
+	unsigned char	ipx_router_node[IPX_NODE_LEN];
+	unsigned char	ipx_device[16];
+	unsigned short	ipx_flags;
+#define IPX_RT_SNAP		8
+#define IPX_RT_8022		4
+#define IPX_RT_BLUEBOOK		2
+#define IPX_RT_ROUTED		1
+};
+
+#define SIOCAIPXITFCRT		(SIOCPROTOPRIVATE)
+#define SIOCAIPXPRISLT		(SIOCPROTOPRIVATE + 1)
+#define SIOCIPXCFGDATA		(SIOCPROTOPRIVATE + 2)
+#define SIOCIPXNCPCONN		(SIOCPROTOPRIVATE + 3)
+#endif /* _IPX_H_ */
diff --git a/include/uapi/linux/irda.h b/include/uapi/linux/irda.h
new file mode 100644
index 00000000000..a014c325231
--- /dev/null
+++ b/include/uapi/linux/irda.h
@@ -0,0 +1,251 @@
+/*********************************************************************
+ *                
+ * Filename:      irda.h
+ * Version:       
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Mon Mar  8 14:06:12 1999
+ * Modified at:   Sat Dec 25 16:06:42 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1999 Dag Brattli, All Rights Reserved.
+ *      
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *  
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#ifndef KERNEL_IRDA_H
+#define KERNEL_IRDA_H
+
+#include <linux/types.h>
+#include <linux/socket.h>
+
+/* Note that this file is shared with user space. */
+
+/* Hint bit positions for first hint byte */
+#define HINT_PNP         0x01
+#define HINT_PDA         0x02
+#define HINT_COMPUTER    0x04
+#define HINT_PRINTER     0x08
+#define HINT_MODEM       0x10
+#define HINT_FAX         0x20
+#define HINT_LAN         0x40
+#define HINT_EXTENSION   0x80
+
+/* Hint bit positions for second hint byte (first extension byte) */
+#define HINT_TELEPHONY   0x01
+#define HINT_FILE_SERVER 0x02
+#define HINT_COMM        0x04
+#define HINT_MESSAGE     0x08
+#define HINT_HTTP        0x10
+#define HINT_OBEX        0x20
+
+/* IrLMP character code values */
+#define CS_ASCII         0x00
+#define	CS_ISO_8859_1    0x01
+#define	CS_ISO_8859_2    0x02
+#define	CS_ISO_8859_3    0x03
+#define	CS_ISO_8859_4    0x04
+#define	CS_ISO_8859_5    0x05
+#define	CS_ISO_8859_6    0x06
+#define	CS_ISO_8859_7    0x07
+#define	CS_ISO_8859_8    0x08
+#define	CS_ISO_8859_9    0x09
+#define CS_UNICODE       0xff
+
+/* These are the currently known dongles */
+typedef enum {
+	IRDA_TEKRAM_DONGLE       = 0,
+	IRDA_ESI_DONGLE          = 1,
+	IRDA_ACTISYS_DONGLE      = 2,
+	IRDA_ACTISYS_PLUS_DONGLE = 3,
+	IRDA_GIRBIL_DONGLE       = 4,
+	IRDA_LITELINK_DONGLE     = 5,
+	IRDA_AIRPORT_DONGLE      = 6,
+	IRDA_OLD_BELKIN_DONGLE   = 7,
+	IRDA_EP7211_IR           = 8,
+	IRDA_MCP2120_DONGLE      = 9,
+	IRDA_ACT200L_DONGLE      = 10,
+	IRDA_MA600_DONGLE        = 11,
+	IRDA_TOIM3232_DONGLE     = 12,
+	IRDA_EP7211_DONGLE       = 13,
+} IRDA_DONGLE;
+
+/* Protocol types to be used for SOCK_DGRAM */
+enum {
+	IRDAPROTO_UNITDATA = 0,
+	IRDAPROTO_ULTRA    = 1,
+	IRDAPROTO_MAX
+};
+
+#define SOL_IRLMP      266 /* Same as SOL_IRDA for now */
+#define SOL_IRTTP      266 /* Same as SOL_IRDA for now */
+
+#define IRLMP_ENUMDEVICES        1	/* Return discovery log */
+#define IRLMP_IAS_SET            2	/* Set an attribute in local IAS */
+#define IRLMP_IAS_QUERY          3	/* Query remote IAS for attribute */
+#define IRLMP_HINTS_SET          4	/* Set hint bits advertised */
+#define IRLMP_QOS_SET            5
+#define IRLMP_QOS_GET            6
+#define IRLMP_MAX_SDU_SIZE       7
+#define IRLMP_IAS_GET            8	/* Get an attribute from local IAS */
+#define IRLMP_IAS_DEL		 9	/* Remove attribute from local IAS */
+#define IRLMP_HINT_MASK_SET	10	/* Set discovery filter */
+#define IRLMP_WAITDEVICE	11	/* Wait for a new discovery */
+
+#define IRTTP_MAX_SDU_SIZE IRLMP_MAX_SDU_SIZE /* Compatibility */
+
+#define IAS_MAX_STRING         256	/* See IrLMP 1.1, 4.3.3.2 */
+#define IAS_MAX_OCTET_STRING  1024	/* See IrLMP 1.1, 4.3.3.2 */
+#define IAS_MAX_CLASSNAME       60	/* See IrLMP 1.1, 4.3.1 */
+#define IAS_MAX_ATTRIBNAME      60	/* See IrLMP 1.1, 4.3.3.1 */
+#define IAS_MAX_ATTRIBNUMBER   256	/* See IrLMP 1.1, 4.3.3.1 */
+/* For user space backward compatibility - may be fixed in kernel 2.5.X
+ * Note : need 60+1 ('\0'), make it 64 for alignement - Jean II */
+#define IAS_EXPORT_CLASSNAME       64
+#define IAS_EXPORT_ATTRIBNAME     256
+
+/* Attribute type needed for struct irda_ias_set */
+#define IAS_MISSING 0
+#define IAS_INTEGER 1
+#define IAS_OCT_SEQ 2
+#define IAS_STRING  3
+
+#define LSAP_ANY              0xff
+
+struct sockaddr_irda {
+	__kernel_sa_family_t sir_family; /* AF_IRDA */
+	__u8        sir_lsap_sel; /* LSAP selector */
+	__u32       sir_addr;     /* Device address */
+	char        sir_name[25]; /* Usually <service>:IrDA:TinyTP */
+};
+
+struct irda_device_info {
+	__u32       saddr;    /* Address of local interface */
+	__u32       daddr;    /* Address of remote device */
+	char        info[22]; /* Description */
+	__u8        charset;  /* Charset used for description */
+	__u8        hints[2]; /* Hint bits */
+};
+
+struct irda_device_list {
+       __u32 len;
+       struct irda_device_info dev[1];
+};
+
+struct irda_ias_set {
+	char irda_class_name[IAS_EXPORT_CLASSNAME];
+	char irda_attrib_name[IAS_EXPORT_ATTRIBNAME];
+	unsigned int irda_attrib_type;
+	union {
+		unsigned int irda_attrib_int;
+		struct {
+			unsigned short len;
+			__u8 octet_seq[IAS_MAX_OCTET_STRING];
+		} irda_attrib_octet_seq;
+		struct {
+			__u8 len;
+			__u8 charset;
+			__u8 string[IAS_MAX_STRING];
+		} irda_attrib_string;
+	} attribute;
+	__u32       daddr;    /* Address of device (for some queries only) */
+};
+
+/* Some private IOCTL's (max 16) */
+#define SIOCSDONGLE    (SIOCDEVPRIVATE + 0)
+#define SIOCGDONGLE    (SIOCDEVPRIVATE + 1)
+#define SIOCSBANDWIDTH (SIOCDEVPRIVATE + 2)
+#define SIOCSMEDIABUSY (SIOCDEVPRIVATE + 3)
+#define SIOCGMEDIABUSY (SIOCDEVPRIVATE + 4)
+#define SIOCGRECEIVING (SIOCDEVPRIVATE + 5)
+#define SIOCSMODE      (SIOCDEVPRIVATE + 6)
+#define SIOCGMODE      (SIOCDEVPRIVATE + 7)
+#define SIOCSDTRRTS    (SIOCDEVPRIVATE + 8)
+#define SIOCGQOS       (SIOCDEVPRIVATE + 9)
+
+/* No reason to include <linux/if.h> just because of this one ;-) */
+#define IRNAMSIZ 16 
+
+/* IrDA quality of service information (must not exceed 16 bytes) */
+struct if_irda_qos {
+	unsigned long  baudrate;
+	unsigned short data_size;
+	unsigned short window_size;
+	unsigned short min_turn_time;
+	unsigned short max_turn_time;
+	unsigned char  add_bofs;
+	unsigned char  link_disc;
+};
+
+/* For setting RTS and DTR lines of a dongle */
+struct if_irda_line {
+	__u8 dtr;
+	__u8 rts;
+};
+
+/* IrDA interface configuration (data part must not exceed 16 bytes) */
+struct if_irda_req {
+	union {
+		char ifrn_name[IRNAMSIZ];  /* if name, e.g. "irda0" */
+	} ifr_ifrn;
+	
+	/* Data part */
+	union {
+		struct if_irda_line ifru_line;
+		struct if_irda_qos  ifru_qos;
+		unsigned short      ifru_flags;
+		unsigned int        ifru_receiving;
+		unsigned int        ifru_mode;
+		unsigned int        ifru_dongle;
+	} ifr_ifru;
+};
+
+#define ifr_baudrate  ifr_ifru.ifru_qos.baudrate
+#define ifr_receiving ifr_ifru.ifru_receiving 
+#define ifr_dongle    ifr_ifru.ifru_dongle
+#define ifr_mode      ifr_ifru.ifru_mode
+#define ifr_dtr       ifr_ifru.ifru_line.dtr
+#define ifr_rts       ifr_ifru.ifru_line.rts
+
+
+/* IrDA netlink definitions */
+#define IRDA_NL_NAME "irda"
+#define IRDA_NL_VERSION 1
+
+enum irda_nl_commands {
+	IRDA_NL_CMD_UNSPEC,
+	IRDA_NL_CMD_SET_MODE,
+	IRDA_NL_CMD_GET_MODE,
+
+	__IRDA_NL_CMD_AFTER_LAST
+};
+#define IRDA_NL_CMD_MAX (__IRDA_NL_CMD_AFTER_LAST - 1)
+
+enum nl80211_attrs {
+	IRDA_NL_ATTR_UNSPEC,
+	IRDA_NL_ATTR_IFNAME,
+	IRDA_NL_ATTR_MODE,
+
+	__IRDA_NL_ATTR_AFTER_LAST
+};
+#define IRDA_NL_ATTR_MAX (__IRDA_NL_ATTR_AFTER_LAST - 1)
+
+/* IrDA modes */
+#define IRDA_MODE_PRIMARY   0x1
+#define IRDA_MODE_SECONDARY 0x2
+#define IRDA_MODE_MONITOR   0x4
+
+#endif /* KERNEL_IRDA_H */
+
+
+
+
diff --git a/include/uapi/linux/irqnr.h b/include/uapi/linux/irqnr.h
new file mode 100644
index 00000000000..e69de29bb2d
--- /dev/null
+++ b/include/uapi/linux/irqnr.h
diff --git a/include/uapi/linux/isdn.h b/include/uapi/linux/isdn.h
new file mode 100644
index 00000000000..eb1995fffc3
--- /dev/null
+++ b/include/uapi/linux/isdn.h
@@ -0,0 +1,143 @@
+/* $Id: isdn.h,v 1.125.2.3 2004/02/10 01:07:14 keil Exp $
+ *
+ * Main header for the Linux ISDN subsystem (linklevel).
+ *
+ * Copyright 1994,95,96 by Fritz Elfert (fritz@isdn4linux.de)
+ * Copyright 1995,96    by Thinking Objects Software GmbH Wuerzburg
+ * Copyright 1995,96    by Michael Hipp (Michael.Hipp@student.uni-tuebingen.de)
+ * 
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef _UAPI__ISDN_H__
+#define _UAPI__ISDN_H__
+
+#include <linux/ioctl.h>
+#include <linux/tty.h>
+
+#define ISDN_MAX_DRIVERS    32
+#define ISDN_MAX_CHANNELS   64
+
+/* New ioctl-codes */
+#define IIOCNETAIF  _IO('I',1)
+#define IIOCNETDIF  _IO('I',2)
+#define IIOCNETSCF  _IO('I',3)
+#define IIOCNETGCF  _IO('I',4)
+#define IIOCNETANM  _IO('I',5)
+#define IIOCNETDNM  _IO('I',6)
+#define IIOCNETGNM  _IO('I',7)
+#define IIOCGETSET  _IO('I',8) /* no longer supported */
+#define IIOCSETSET  _IO('I',9) /* no longer supported */
+#define IIOCSETVER  _IO('I',10)
+#define IIOCNETHUP  _IO('I',11)
+#define IIOCSETGST  _IO('I',12)
+#define IIOCSETBRJ  _IO('I',13)
+#define IIOCSIGPRF  _IO('I',14)
+#define IIOCGETPRF  _IO('I',15)
+#define IIOCSETPRF  _IO('I',16)
+#define IIOCGETMAP  _IO('I',17)
+#define IIOCSETMAP  _IO('I',18)
+#define IIOCNETASL  _IO('I',19)
+#define IIOCNETDIL  _IO('I',20)
+#define IIOCGETCPS  _IO('I',21)
+#define IIOCGETDVR  _IO('I',22)
+#define IIOCNETLCR  _IO('I',23) /* dwabc ioctl for LCR from isdnlog */
+#define IIOCNETDWRSET  _IO('I',24) /* dwabc ioctl to reset abc-values to default on a net-interface */
+
+#define IIOCNETALN  _IO('I',32)
+#define IIOCNETDLN  _IO('I',33)
+
+#define IIOCNETGPN  _IO('I',34)
+
+#define IIOCDBGVAR  _IO('I',127)
+
+#define IIOCDRVCTL  _IO('I',128)
+
+/* cisco hdlck device private ioctls */
+#define SIOCGKEEPPERIOD	(SIOCDEVPRIVATE + 0)
+#define SIOCSKEEPPERIOD	(SIOCDEVPRIVATE + 1)
+#define SIOCGDEBSERINT	(SIOCDEVPRIVATE + 2)
+#define SIOCSDEBSERINT	(SIOCDEVPRIVATE + 3)
+
+/* Packet encapsulations for net-interfaces */
+#define ISDN_NET_ENCAP_ETHER      0
+#define ISDN_NET_ENCAP_RAWIP      1
+#define ISDN_NET_ENCAP_IPTYP      2
+#define ISDN_NET_ENCAP_CISCOHDLC  3 /* Without SLARP and keepalive */
+#define ISDN_NET_ENCAP_SYNCPPP    4
+#define ISDN_NET_ENCAP_UIHDLC     5
+#define ISDN_NET_ENCAP_CISCOHDLCK 6 /* With SLARP and keepalive    */
+#define ISDN_NET_ENCAP_X25IFACE   7 /* Documentation/networking/x25-iface.txt */
+#define ISDN_NET_ENCAP_MAX_ENCAP  ISDN_NET_ENCAP_X25IFACE
+
+/* Facility which currently uses an ISDN-channel */
+#define ISDN_USAGE_NONE       0
+#define ISDN_USAGE_RAW        1
+#define ISDN_USAGE_MODEM      2
+#define ISDN_USAGE_NET        3
+#define ISDN_USAGE_VOICE      4
+#define ISDN_USAGE_FAX        5
+#define ISDN_USAGE_MASK       7 /* Mask to get plain usage */
+#define ISDN_USAGE_DISABLED  32 /* This bit is set, if channel is disabled */
+#define ISDN_USAGE_EXCLUSIVE 64 /* This bit is set, if channel is exclusive */
+#define ISDN_USAGE_OUTGOING 128 /* This bit is set, if channel is outgoing  */
+
+#define ISDN_MODEM_NUMREG    24        /* Number of Modem-Registers        */
+#define ISDN_LMSNLEN         255 /* Length of tty's Listen-MSN string */
+#define ISDN_CMSGLEN	     50	 /* Length of CONNECT-Message to add for Modem */
+
+#define ISDN_MSNLEN          32
+#define NET_DV 0x06  /* Data version for isdn_net_ioctl_cfg   */
+#define TTY_DV 0x06  /* Data version for iprofd etc.          */
+
+#define INF_DV 0x01  /* Data version for /dev/isdninfo        */
+
+typedef struct {
+  char drvid[25];
+  unsigned long arg;
+} isdn_ioctl_struct;
+
+typedef struct {
+  char name[10];
+  char phone[ISDN_MSNLEN];
+  int  outgoing;
+} isdn_net_ioctl_phone;
+
+typedef struct {
+  char name[10];     /* Name of interface                     */
+  char master[10];   /* Name of Master for Bundling           */
+  char slave[10];    /* Name of Slave for Bundling            */
+  char eaz[256];     /* EAZ/MSN                               */
+  char drvid[25];    /* DriverId for Bindings                 */
+  int  onhtime;      /* Hangup-Timeout                        */
+  int  charge;       /* Charge-Units                          */
+  int  l2_proto;     /* Layer-2 protocol                      */
+  int  l3_proto;     /* Layer-3 protocol                      */
+  int  p_encap;      /* Encapsulation                         */
+  int  exclusive;    /* Channel, if bound exclusive           */
+  int  dialmax;      /* Dial Retry-Counter                    */
+  int  slavedelay;   /* Delay until slave starts up           */
+  int  cbdelay;      /* Delay before Callback                 */
+  int  chargehup;    /* Flag: Charge-Hangup                   */
+  int  ihup;         /* Flag: Hangup-Timeout on incoming line */
+  int  secure;       /* Flag: Secure                          */
+  int  callback;     /* Flag: Callback                        */
+  int  cbhup;        /* Flag: Reject Call before Callback     */
+  int  pppbind;      /* ippp device for bindings              */
+  int  chargeint;    /* Use fixed charge interval length      */
+  int  triggercps;   /* BogoCPS needed for triggering slave   */
+  int  dialtimeout;  /* Dial-Timeout                          */
+  int  dialwait;     /* Time to wait after failed dial        */
+  int  dialmode;     /* Flag: off / on / auto                 */
+} isdn_net_ioctl_cfg;
+
+#define ISDN_NET_DIALMODE_MASK  0xC0    /* bits for status                */
+#define ISDN_NET_DM_OFF	        0x00    /* this interface is stopped      */
+#define ISDN_NET_DM_MANUAL	0x40    /* this interface is on (manual)  */
+#define ISDN_NET_DM_AUTO	0x80    /* this interface is autodial     */
+#define ISDN_NET_DIALMODE(x) ((&(x))->flags & ISDN_NET_DIALMODE_MASK)
+
+
+#endif /* _UAPI__ISDN_H__ */
diff --git a/include/uapi/linux/isdn_divertif.h b/include/uapi/linux/isdn_divertif.h
new file mode 100644
index 00000000000..3e3c2d89841
--- /dev/null
+++ b/include/uapi/linux/isdn_divertif.h
@@ -0,0 +1,30 @@
+/* $Id: isdn_divertif.h,v 1.4.6.1 2001/09/23 22:25:05 kai Exp $
+ *
+ * Header for the diversion supplementary interface for i4l.
+ *
+ * Author    Werner Cornelius (werner@titro.de)
+ * Copyright by Werner Cornelius (werner@titro.de)
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef _UAPI_LINUX_ISDN_DIVERTIF_H
+#define _UAPI_LINUX_ISDN_DIVERTIF_H
+
+/***********************************************************/
+/* magic value is also used to control version information */
+/***********************************************************/
+#define DIVERT_IF_MAGIC 0x25873401
+#define DIVERT_CMD_REG  0x00  /* register command */
+#define DIVERT_CMD_REL  0x01  /* release command */
+#define DIVERT_NO_ERR   0x00  /* return value no error */
+#define DIVERT_CMD_ERR  0x01  /* invalid cmd */
+#define DIVERT_VER_ERR  0x02  /* magic/version invalid */
+#define DIVERT_REG_ERR  0x03  /* module already registered */
+#define DIVERT_REL_ERR  0x04  /* module not registered */
+#define DIVERT_REG_NAME isdn_register_divert
+
+
+#endif /* _UAPI_LINUX_ISDN_DIVERTIF_H */
diff --git a/include/uapi/linux/isdn_ppp.h b/include/uapi/linux/isdn_ppp.h
new file mode 100644
index 00000000000..e7d7bd2aed3
--- /dev/null
+++ b/include/uapi/linux/isdn_ppp.h
@@ -0,0 +1,67 @@
+/* Linux ISDN subsystem, sync PPP, interface to ipppd
+ *
+ * Copyright 1994-1999  by Fritz Elfert (fritz@isdn4linux.de)
+ * Copyright 1995,96    Thinking Objects Software GmbH Wuerzburg
+ * Copyright 1995,96    by Michael Hipp (Michael.Hipp@student.uni-tuebingen.de)
+ * Copyright 2000-2002  by Kai Germaschewski (kai@germaschewski.name)
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef _UAPI_LINUX_ISDN_PPP_H
+#define _UAPI_LINUX_ISDN_PPP_H
+
+#define CALLTYPE_INCOMING 0x1
+#define CALLTYPE_OUTGOING 0x2
+#define CALLTYPE_CALLBACK 0x4
+
+#define IPPP_VERSION    "2.2.0"
+
+struct pppcallinfo
+{
+  int calltype;
+  unsigned char local_num[64];
+  unsigned char remote_num[64];
+  int charge_units;
+};
+
+#define PPPIOCGCALLINFO _IOWR('t',128,struct pppcallinfo)
+#define PPPIOCBUNDLE   _IOW('t',129,int)
+#define PPPIOCGMPFLAGS _IOR('t',130,int)
+#define PPPIOCSMPFLAGS _IOW('t',131,int)
+#define PPPIOCSMPMTU   _IOW('t',132,int)
+#define PPPIOCSMPMRU   _IOW('t',133,int)
+#define PPPIOCGCOMPRESSORS _IOR('t',134,unsigned long [8])
+#define PPPIOCSCOMPRESSOR _IOW('t',135,int)
+#define PPPIOCGIFNAME      _IOR('t',136, char [IFNAMSIZ] )
+
+
+#define SC_MP_PROT       0x00000200
+#define SC_REJ_MP_PROT   0x00000400
+#define SC_OUT_SHORT_SEQ 0x00000800
+#define SC_IN_SHORT_SEQ  0x00004000
+
+#define SC_DECOMP_ON		0x01
+#define SC_COMP_ON		0x02
+#define SC_DECOMP_DISCARD	0x04
+#define SC_COMP_DISCARD		0x08
+#define SC_LINK_DECOMP_ON	0x10
+#define SC_LINK_COMP_ON		0x20
+#define SC_LINK_DECOMP_DISCARD	0x40
+#define SC_LINK_COMP_DISCARD	0x80
+
+#define ISDN_PPP_COMP_MAX_OPTIONS 16
+
+#define IPPP_COMP_FLAG_XMIT 0x1
+#define IPPP_COMP_FLAG_LINK 0x2
+
+struct isdn_ppp_comp_data {
+  int num;
+  unsigned char options[ISDN_PPP_COMP_MAX_OPTIONS];
+  int optlen;
+  int flags;
+};
+
+#endif /* _UAPI_LINUX_ISDN_PPP_H */
diff --git a/include/uapi/linux/isdnif.h b/include/uapi/linux/isdnif.h
new file mode 100644
index 00000000000..246138c01c4
--- /dev/null
+++ b/include/uapi/linux/isdnif.h
@@ -0,0 +1,56 @@
+/* $Id: isdnif.h,v 1.43.2.2 2004/01/12 23:08:35 keil Exp $
+ *
+ * Linux ISDN subsystem
+ * Definition of the interface between the subsystem and its low-level drivers.
+ *
+ * Copyright 1994,95,96 by Fritz Elfert (fritz@isdn4linux.de)
+ * Copyright 1995,96    Thinking Objects Software GmbH Wuerzburg
+ * 
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef _UAPI__ISDNIF_H__
+#define _UAPI__ISDNIF_H__
+
+
+/*
+ * Values for general protocol-selection
+ */
+#define ISDN_PTYPE_UNKNOWN   0   /* Protocol undefined   */
+#define ISDN_PTYPE_1TR6      1   /* german 1TR6-protocol */
+#define ISDN_PTYPE_EURO      2   /* EDSS1-protocol       */
+#define ISDN_PTYPE_LEASED    3   /* for leased lines     */
+#define ISDN_PTYPE_NI1       4   /* US NI-1 protocol     */
+#define ISDN_PTYPE_MAX       7   /* Max. 8 Protocols     */
+
+/*
+ * Values for Layer-2-protocol-selection
+ */
+#define ISDN_PROTO_L2_X75I   0   /* X75/LAPB with I-Frames            */
+#define ISDN_PROTO_L2_X75UI  1   /* X75/LAPB with UI-Frames           */
+#define ISDN_PROTO_L2_X75BUI 2   /* X75/LAPB with UI-Frames           */
+#define ISDN_PROTO_L2_HDLC   3   /* HDLC                              */
+#define ISDN_PROTO_L2_TRANS  4   /* Transparent (Voice)               */
+#define ISDN_PROTO_L2_X25DTE 5   /* X25/LAPB DTE mode                 */
+#define ISDN_PROTO_L2_X25DCE 6   /* X25/LAPB DCE mode                 */
+#define ISDN_PROTO_L2_V11096 7   /* V.110 bitrate adaption 9600 Baud  */
+#define ISDN_PROTO_L2_V11019 8   /* V.110 bitrate adaption 19200 Baud */
+#define ISDN_PROTO_L2_V11038 9   /* V.110 bitrate adaption 38400 Baud */
+#define ISDN_PROTO_L2_MODEM  10  /* Analog Modem on Board */
+#define ISDN_PROTO_L2_FAX    11  /* Fax Group 2/3         */
+#define ISDN_PROTO_L2_HDLC_56K 12   /* HDLC 56k                          */
+#define ISDN_PROTO_L2_MAX    15  /* Max. 16 Protocols                 */
+
+/*
+ * Values for Layer-3-protocol-selection
+ */
+#define ISDN_PROTO_L3_TRANS	0	/* Transparent */
+#define ISDN_PROTO_L3_TRANSDSP	1	/* Transparent with DSP */
+#define ISDN_PROTO_L3_FCLASS2	2	/* Fax Group 2/3 CLASS 2 */
+#define ISDN_PROTO_L3_FCLASS1	3	/* Fax Group 2/3 CLASS 1 */
+#define ISDN_PROTO_L3_MAX	7	/* Max. 8 Protocols */
+
+
+#endif /* _UAPI__ISDNIF_H__ */
diff --git a/include/uapi/linux/iso_fs.h b/include/uapi/linux/iso_fs.h
new file mode 100644
index 00000000000..4688ac4284e
--- /dev/null
+++ b/include/uapi/linux/iso_fs.h
@@ -0,0 +1,165 @@
+#ifndef _ISOFS_FS_H
+#define _ISOFS_FS_H
+
+#include <linux/types.h>
+#include <linux/magic.h>
+
+/*
+ * The isofs filesystem constants/structures
+ */
+
+/* This part borrowed from the bsd386 isofs */
+#define ISODCL(from, to) (to - from + 1)
+
+struct iso_volume_descriptor {
+	char type[ISODCL(1,1)]; /* 711 */
+	char id[ISODCL(2,6)];
+	char version[ISODCL(7,7)];
+	char data[ISODCL(8,2048)];
+};
+
+/* volume descriptor types */
+#define ISO_VD_PRIMARY 1
+#define ISO_VD_SUPPLEMENTARY 2
+#define ISO_VD_END 255
+
+#define ISO_STANDARD_ID "CD001"
+
+struct iso_primary_descriptor {
+	char type			[ISODCL (  1,   1)]; /* 711 */
+	char id				[ISODCL (  2,   6)];
+	char version			[ISODCL (  7,   7)]; /* 711 */
+	char unused1			[ISODCL (  8,   8)];
+	char system_id			[ISODCL (  9,  40)]; /* achars */
+	char volume_id			[ISODCL ( 41,  72)]; /* dchars */
+	char unused2			[ISODCL ( 73,  80)];
+	char volume_space_size		[ISODCL ( 81,  88)]; /* 733 */
+	char unused3			[ISODCL ( 89, 120)];
+	char volume_set_size		[ISODCL (121, 124)]; /* 723 */
+	char volume_sequence_number	[ISODCL (125, 128)]; /* 723 */
+	char logical_block_size		[ISODCL (129, 132)]; /* 723 */
+	char path_table_size		[ISODCL (133, 140)]; /* 733 */
+	char type_l_path_table		[ISODCL (141, 144)]; /* 731 */
+	char opt_type_l_path_table	[ISODCL (145, 148)]; /* 731 */
+	char type_m_path_table		[ISODCL (149, 152)]; /* 732 */
+	char opt_type_m_path_table	[ISODCL (153, 156)]; /* 732 */
+	char root_directory_record	[ISODCL (157, 190)]; /* 9.1 */
+	char volume_set_id		[ISODCL (191, 318)]; /* dchars */
+	char publisher_id		[ISODCL (319, 446)]; /* achars */
+	char preparer_id		[ISODCL (447, 574)]; /* achars */
+	char application_id		[ISODCL (575, 702)]; /* achars */
+	char copyright_file_id		[ISODCL (703, 739)]; /* 7.5 dchars */
+	char abstract_file_id		[ISODCL (740, 776)]; /* 7.5 dchars */
+	char bibliographic_file_id	[ISODCL (777, 813)]; /* 7.5 dchars */
+	char creation_date		[ISODCL (814, 830)]; /* 8.4.26.1 */
+	char modification_date		[ISODCL (831, 847)]; /* 8.4.26.1 */
+	char expiration_date		[ISODCL (848, 864)]; /* 8.4.26.1 */
+	char effective_date		[ISODCL (865, 881)]; /* 8.4.26.1 */
+	char file_structure_version	[ISODCL (882, 882)]; /* 711 */
+	char unused4			[ISODCL (883, 883)];
+	char application_data		[ISODCL (884, 1395)];
+	char unused5			[ISODCL (1396, 2048)];
+};
+
+/* Almost the same as the primary descriptor but two fields are specified */
+struct iso_supplementary_descriptor {
+	char type			[ISODCL (  1,   1)]; /* 711 */
+	char id				[ISODCL (  2,   6)];
+	char version			[ISODCL (  7,   7)]; /* 711 */
+	char flags			[ISODCL (  8,   8)]; /* 853 */
+	char system_id			[ISODCL (  9,  40)]; /* achars */
+	char volume_id			[ISODCL ( 41,  72)]; /* dchars */
+	char unused2			[ISODCL ( 73,  80)];
+	char volume_space_size		[ISODCL ( 81,  88)]; /* 733 */
+	char escape			[ISODCL ( 89, 120)]; /* 856 */
+	char volume_set_size		[ISODCL (121, 124)]; /* 723 */
+	char volume_sequence_number	[ISODCL (125, 128)]; /* 723 */
+	char logical_block_size		[ISODCL (129, 132)]; /* 723 */
+	char path_table_size		[ISODCL (133, 140)]; /* 733 */
+	char type_l_path_table		[ISODCL (141, 144)]; /* 731 */
+	char opt_type_l_path_table	[ISODCL (145, 148)]; /* 731 */
+	char type_m_path_table		[ISODCL (149, 152)]; /* 732 */
+	char opt_type_m_path_table	[ISODCL (153, 156)]; /* 732 */
+	char root_directory_record	[ISODCL (157, 190)]; /* 9.1 */
+	char volume_set_id		[ISODCL (191, 318)]; /* dchars */
+	char publisher_id		[ISODCL (319, 446)]; /* achars */
+	char preparer_id		[ISODCL (447, 574)]; /* achars */
+	char application_id		[ISODCL (575, 702)]; /* achars */
+	char copyright_file_id		[ISODCL (703, 739)]; /* 7.5 dchars */
+	char abstract_file_id		[ISODCL (740, 776)]; /* 7.5 dchars */
+	char bibliographic_file_id	[ISODCL (777, 813)]; /* 7.5 dchars */
+	char creation_date		[ISODCL (814, 830)]; /* 8.4.26.1 */
+	char modification_date		[ISODCL (831, 847)]; /* 8.4.26.1 */
+	char expiration_date		[ISODCL (848, 864)]; /* 8.4.26.1 */
+	char effective_date		[ISODCL (865, 881)]; /* 8.4.26.1 */
+	char file_structure_version	[ISODCL (882, 882)]; /* 711 */
+	char unused4			[ISODCL (883, 883)];
+	char application_data		[ISODCL (884, 1395)];
+	char unused5			[ISODCL (1396, 2048)];
+};
+
+
+#define HS_STANDARD_ID "CDROM"
+
+struct  hs_volume_descriptor {
+	char foo			[ISODCL (  1,   8)]; /* 733 */
+	char type			[ISODCL (  9,   9)]; /* 711 */
+	char id				[ISODCL ( 10,  14)];
+	char version			[ISODCL ( 15,  15)]; /* 711 */
+	char data[ISODCL(16,2048)];
+};
+
+
+struct hs_primary_descriptor {
+	char foo			[ISODCL (  1,   8)]; /* 733 */
+	char type			[ISODCL (  9,   9)]; /* 711 */
+	char id				[ISODCL ( 10,  14)];
+	char version			[ISODCL ( 15,  15)]; /* 711 */
+	char unused1			[ISODCL ( 16,  16)]; /* 711 */
+	char system_id			[ISODCL ( 17,  48)]; /* achars */
+	char volume_id			[ISODCL ( 49,  80)]; /* dchars */
+	char unused2			[ISODCL ( 81,  88)]; /* 733 */
+	char volume_space_size		[ISODCL ( 89,  96)]; /* 733 */
+	char unused3			[ISODCL ( 97, 128)]; /* 733 */
+	char volume_set_size		[ISODCL (129, 132)]; /* 723 */
+	char volume_sequence_number	[ISODCL (133, 136)]; /* 723 */
+	char logical_block_size		[ISODCL (137, 140)]; /* 723 */
+	char path_table_size		[ISODCL (141, 148)]; /* 733 */
+	char type_l_path_table		[ISODCL (149, 152)]; /* 731 */
+	char unused4			[ISODCL (153, 180)]; /* 733 */
+	char root_directory_record	[ISODCL (181, 214)]; /* 9.1 */
+};
+
+/* We use this to help us look up the parent inode numbers. */
+
+struct iso_path_table{
+	unsigned char  name_len[2];	/* 721 */
+	char extent[4];		/* 731 */
+	char  parent[2];	/* 721 */
+	char name[0];
+} __attribute__((packed));
+
+/* high sierra is identical to iso, except that the date is only 6 bytes, and
+   there is an extra reserved byte after the flags */
+
+struct iso_directory_record {
+	char length			[ISODCL (1, 1)]; /* 711 */
+	char ext_attr_length		[ISODCL (2, 2)]; /* 711 */
+	char extent			[ISODCL (3, 10)]; /* 733 */
+	char size			[ISODCL (11, 18)]; /* 733 */
+	char date			[ISODCL (19, 25)]; /* 7 by 711 */
+	char flags			[ISODCL (26, 26)];
+	char file_unit_size		[ISODCL (27, 27)]; /* 711 */
+	char interleave			[ISODCL (28, 28)]; /* 711 */
+	char volume_sequence_number	[ISODCL (29, 32)]; /* 723 */
+	unsigned char name_len		[ISODCL (33, 33)]; /* 711 */
+	char name			[0];
+} __attribute__((packed));
+
+#define ISOFS_BLOCK_BITS 11
+#define ISOFS_BLOCK_SIZE 2048
+
+#define ISOFS_BUFFER_SIZE(INODE) ((INODE)->i_sb->s_blocksize)
+#define ISOFS_BUFFER_BITS(INODE) ((INODE)->i_sb->s_blocksize_bits)
+
+#endif /* _ISOFS_FS_H */
diff --git a/include/uapi/linux/ivtv.h b/include/uapi/linux/ivtv.h
new file mode 100644
index 00000000000..42bf725751a
--- /dev/null
+++ b/include/uapi/linux/ivtv.h
@@ -0,0 +1,73 @@
+/*
+    Public ivtv API header
+    Copyright (C) 2003-2004  Kevin Thayer <nufan_wfk at yahoo.com>
+    Copyright (C) 2004-2007  Hans Verkuil <hverkuil@xs4all.nl>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __LINUX_IVTV_H__
+#define __LINUX_IVTV_H__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/videodev2.h>
+
+/* ivtv knows several distinct output modes: MPEG streaming,
+   YUV streaming, YUV updates through user DMA and the passthrough
+   mode.
+
+   In order to clearly tell the driver that we are in user DMA
+   YUV mode you need to call IVTV_IOC_DMA_FRAME with y_source == NULL
+   first (althrough if you don't then the first time
+   DMA_FRAME is called the mode switch is done automatically).
+
+   When you close the file handle the user DMA mode is exited again.
+
+   While in one mode, you cannot use another mode (EBUSY is returned).
+
+   All this means that if you want to change the YUV interlacing
+   for the user DMA YUV mode you first need to do call IVTV_IOC_DMA_FRAME
+   with y_source == NULL before you can set the correct format using
+   VIDIOC_S_FMT.
+
+   Eventually all this should be replaced with a proper V4L2 API,
+   but for now we have to do it this way. */
+
+struct ivtv_dma_frame {
+	enum v4l2_buf_type type; /* V4L2_BUF_TYPE_VIDEO_OUTPUT */
+	__u32 pixelformat;	 /* 0 == same as destination */
+	void __user *y_source;   /* if NULL and type == V4L2_BUF_TYPE_VIDEO_OUTPUT,
+				    then just switch to user DMA YUV output mode */
+	void __user *uv_source;  /* Unused for RGB pixelformats */
+	struct v4l2_rect src;
+	struct v4l2_rect dst;
+	__u32 src_width;
+	__u32 src_height;
+};
+
+#define IVTV_IOC_DMA_FRAME		_IOW ('V', BASE_VIDIOC_PRIVATE+0, struct ivtv_dma_frame)
+
+/* Select the passthrough mode (if the argument is non-zero). In the passthrough
+   mode the output of the encoder is passed immediately into the decoder. */
+#define IVTV_IOC_PASSTHROUGH_MODE	_IOW ('V', BASE_VIDIOC_PRIVATE+1, int)
+
+/* Deprecated defines: applications should use the defines from videodev2.h */
+#define IVTV_SLICED_TYPE_TELETEXT_B     V4L2_MPEG_VBI_IVTV_TELETEXT_B
+#define IVTV_SLICED_TYPE_CAPTION_525    V4L2_MPEG_VBI_IVTV_CAPTION_525
+#define IVTV_SLICED_TYPE_WSS_625        V4L2_MPEG_VBI_IVTV_WSS_625
+#define IVTV_SLICED_TYPE_VPS            V4L2_MPEG_VBI_IVTV_VPS
+
+#endif /* _LINUX_IVTV_H */
diff --git a/include/uapi/linux/ivtvfb.h b/include/uapi/linux/ivtvfb.h
new file mode 100644
index 00000000000..e8b92f67f10
--- /dev/null
+++ b/include/uapi/linux/ivtvfb.h
@@ -0,0 +1,37 @@
+/*
+    On Screen Display cx23415 Framebuffer driver
+
+    Copyright (C) 2006, 2007  Ian Armstrong <ian@iarmst.demon.co.uk>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __LINUX_IVTVFB_H__
+#define __LINUX_IVTVFB_H__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+/* Framebuffer external API */
+
+struct ivtvfb_dma_frame {
+	void __user *source;
+	unsigned long dest_offset;
+	int count;
+};
+
+#define IVTVFB_IOC_DMA_FRAME 	_IOW('V', BASE_VIDIOC_PRIVATE+0, struct ivtvfb_dma_frame)
+
+#endif
diff --git a/include/uapi/linux/ixjuser.h b/include/uapi/linux/ixjuser.h
new file mode 100644
index 00000000000..94ab5e942e5
--- /dev/null
+++ b/include/uapi/linux/ixjuser.h
@@ -0,0 +1,720 @@
+#ifndef __LINUX_IXJUSER_H
+#define __LINUX_IXJUSER_H
+
+/******************************************************************************
+ *
+ *    ixjuser.h
+ *
+ * Device Driver for Quicknet Technologies, Inc.'s Telephony cards
+ * including the Internet PhoneJACK, Internet PhoneJACK Lite,
+ * Internet PhoneJACK PCI, Internet LineJACK, Internet PhoneCARD and
+ * SmartCABLE
+ *
+ *    (c) Copyright 1999-2001  Quicknet Technologies, Inc.
+ *
+ *    This program is free software; you can redistribute it and/or
+ *    modify it under the terms of the GNU General Public License
+ *    as published by the Free Software Foundation; either version
+ *    2 of the License, or (at your option) any later version.
+ *
+ * Author:          Ed Okerson, <eokerson@quicknet.net>
+ *    
+ * Contributors:    Greg Herlein, <gherlein@quicknet.net>
+ *                  David W. Erhart, <derhart@quicknet.net>
+ *                  John Sellers, <jsellers@quicknet.net>
+ *                  Mike Preston, <mpreston@quicknet.net>
+ *
+ * More information about the hardware related to this driver can be found
+ * at our website:    http://www.quicknet.net
+ *
+ * Fixes:
+ *
+ * IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY FOR
+ * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT
+ * OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF QUICKNET
+ * TECHNOLOGIES, INC.HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * QUICKNET TECHNOLOGIES, INC. SPECIFICALLY DISCLAIMS ANY WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
+ * ON AN "AS IS" BASIS, AND QUICKNET TECHNOLOGIES, INC. HAS NO OBLIGATION 
+ * TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
+ *
+ *****************************************************************************/
+
+#include <linux/telephony.h>
+
+
+/******************************************************************************
+*
+* IOCTL's used for the Quicknet Telephony Cards
+*
+* If you use the IXJCTL_TESTRAM command, the card must be power cycled to
+* reset the SRAM values before further use.
+*
+******************************************************************************/
+
+#define IXJCTL_DSP_RESET 		_IO  ('q', 0xC0)
+
+#define IXJCTL_RING                     PHONE_RING
+#define IXJCTL_HOOKSTATE                PHONE_HOOKSTATE
+#define IXJCTL_MAXRINGS			PHONE_MAXRINGS
+#define IXJCTL_RING_CADENCE		PHONE_RING_CADENCE
+#define IXJCTL_RING_START		PHONE_RING_START
+#define IXJCTL_RING_STOP		PHONE_RING_STOP
+
+#define IXJCTL_CARDTYPE			_IOR ('q', 0xC1, int)
+#define IXJCTL_SERIAL			_IOR ('q', 0xC2, int)
+#define IXJCTL_DSP_TYPE                 _IOR ('q', 0xC3, int)
+#define IXJCTL_DSP_VERSION              _IOR ('q', 0xC4, int)
+#define IXJCTL_VERSION              	_IOR ('q', 0xDA, char *)
+#define IXJCTL_DSP_IDLE			_IO  ('q', 0xC5)
+#define IXJCTL_TESTRAM			_IO  ('q', 0xC6)
+
+/******************************************************************************
+*
+* This group of IOCTLs deal with the record settings of the DSP
+*
+* The IXJCTL_REC_DEPTH command sets the internal buffer depth of the DSP.
+* Setting a lower depth reduces latency, but increases the demand of the
+* application to service the driver without frame loss.  The DSP has 480
+* bytes of physical buffer memory for the record channel so the true
+* maximum limit is determined by how many frames will fit in the buffer.
+*
+* 1 uncompressed (480 byte) 16-bit linear frame.
+* 2 uncompressed (240 byte) 8-bit A-law/mu-law frames.
+* 15 TrueSpeech 8.5 frames.
+* 20 TrueSpeech 6.3,5.3,4.8 or 4.1 frames.
+*
+* The default in the driver is currently set to 2 frames.
+*
+* The IXJCTL_REC_VOLUME and IXJCTL_PLAY_VOLUME commands both use a Q8
+* number as a parameter, 0x100 scales the signal by 1.0, 0x200 scales the
+* signal by 2.0, 0x80 scales the signal by 0.5.  No protection is given
+* against over-scaling, if the multiplication factor times the input
+* signal exceeds 16 bits, overflow distortion will occur.  The default
+* setting is 0x100 (1.0).
+*
+* The IXJCTL_REC_LEVEL returns the average signal level (not r.m.s.) on
+* the most recently recorded frame as a 16 bit value.
+******************************************************************************/
+
+#define IXJCTL_REC_CODEC                PHONE_REC_CODEC
+#define IXJCTL_REC_START                PHONE_REC_START
+#define IXJCTL_REC_STOP                 PHONE_REC_STOP
+#define IXJCTL_REC_DEPTH		PHONE_REC_DEPTH
+#define IXJCTL_FRAME			PHONE_FRAME
+#define IXJCTL_REC_VOLUME		PHONE_REC_VOLUME
+#define IXJCTL_REC_LEVEL		PHONE_REC_LEVEL
+
+typedef enum {
+	f300_640 = 4, f300_500, f1100, f350, f400, f480, f440, f620, f20_50,
+	f133_200, f300, f300_420, f330, f300_425, f330_440, f340, f350_400,
+	f350_440, f350_450, f360, f380_420, f392, f400_425, f400_440, f400_450,
+	f420, f425, f425_450, f425_475, f435, f440_450, f440_480, f445, f450,
+	f452, f475, f480_620, f494, f500, f520, f523, f525, f540_660, f587,
+	f590, f600, f660, f700, f740, f750, f750_1450, f770, f800, f816, f850,
+	f857_1645, f900, f900_1300, f935_1215, f941_1477, f942, f950, f950_1400,
+	f975, f1000, f1020, f1050, f1100_1750, f1140, f1200, f1209, f1330, f1336,
+	lf1366, f1380, f1400, f1477, f1600, f1633_1638, f1800, f1860
+} IXJ_FILTER_FREQ;
+
+typedef struct {
+	unsigned int filter;
+	IXJ_FILTER_FREQ freq;
+	char enable;
+} IXJ_FILTER;
+
+typedef struct {
+	char enable;
+	char en_filter;
+	unsigned int filter;
+	unsigned int on1;
+	unsigned int off1;
+	unsigned int on2;
+	unsigned int off2;
+	unsigned int on3;
+	unsigned int off3;
+} IXJ_FILTER_CADENCE;
+
+#define IXJCTL_SET_FILTER		_IOW ('q', 0xC7, IXJ_FILTER *)
+#define IXJCTL_SET_FILTER_RAW		_IOW ('q', 0xDD, IXJ_FILTER_RAW *)
+#define IXJCTL_GET_FILTER_HIST		_IOW ('q', 0xC8, int)
+#define IXJCTL_FILTER_CADENCE		_IOW ('q', 0xD6, IXJ_FILTER_CADENCE *)
+#define IXJCTL_PLAY_CID			_IO  ('q', 0xD7)
+/******************************************************************************
+*
+* This IOCTL allows you to reassign values in the tone index table.  The
+* tone table has 32 entries (0 - 31), but the driver only allows entries
+* 13 - 27 to be modified, entry 0 is reserved for silence and 1 - 12 are
+* the standard DTMF digits and 28 - 31 are the DTMF tones for A, B, C & D.
+* The positions used internally for Call Progress Tones are as follows:
+*    Dial Tone   - 25
+*    Ring Back   - 26
+*    Busy Signal - 27
+*
+* The freq values are calculated as:
+* freq = cos(2 * PI * frequency / 8000)
+*
+* The most commonly needed values are already calculated and listed in the
+* enum IXJ_TONE_FREQ.  Each tone index can have two frequencies with
+* different gains, if you are only using a single frequency set the unused
+* one to 0.
+*
+* The gain values range from 0 to 15 indicating +6dB to -24dB in 2dB
+* increments.
+*
+******************************************************************************/
+
+typedef enum {
+	hz20 = 0x7ffa,
+	hz50 = 0x7fe5,
+	hz133 = 0x7f4c,
+	hz200 = 0x7e6b,
+	hz261 = 0x7d50,		/* .63 C1  */
+	hz277 = 0x7cfa,		/* .18 CS1 */
+	hz293 = 0x7c9f,		/* .66 D1  */
+	hz300 = 0x7c75,
+	hz311 = 0x7c32,		/* .13 DS1 */
+	hz329 = 0x7bbf,		/* .63 E1  */
+	hz330 = 0x7bb8,
+	hz340 = 0x7b75,
+	hz349 = 0x7b37,		/* .23 F1  */
+	hz350 = 0x7b30,
+	hz360 = 0x7ae9,
+	hz369 = 0x7aa8,		/* .99 FS1 */
+	hz380 = 0x7a56,
+	hz392 = 0x79fa,		/* .00 G1  */
+	hz400 = 0x79bb,
+	hz415 = 0x7941,		/* .30 GS1 */
+	hz420 = 0x7918,
+	hz425 = 0x78ee,
+	hz435 = 0x7899,
+	hz440 = 0x786d,		/* .00 A1  */
+	hz445 = 0x7842,
+	hz450 = 0x7815,
+	hz452 = 0x7803,
+	hz466 = 0x7784,		/* .16 AS1 */
+	hz475 = 0x7731,
+	hz480 = 0x7701,
+	hz493 = 0x7685,		/* .88 B1  */
+	hz494 = 0x767b,
+	hz500 = 0x7640,
+	hz520 = 0x7578,
+	hz523 = 0x7559,		/* .25 C2  */
+	hz525 = 0x7544,
+	hz540 = 0x74a7,
+	hz554 = 0x7411,		/* .37 CS2 */
+	hz587 = 0x72a1,		/* .33 D2  */
+	hz590 = 0x727f,
+	hz600 = 0x720b,
+	hz620 = 0x711e,
+	hz622 = 0x7106,		/* .25 DS2 */
+	hz659 = 0x6f3b,		/* .26 E2  */
+	hz660 = 0x6f2e,
+	hz698 = 0x6d3d,		/* .46 F2  */
+	hz700 = 0x6d22,
+	hz739 = 0x6b09,		/* .99 FS2 */
+	hz740 = 0x6afa,
+	hz750 = 0x6a6c,
+	hz770 = 0x694b,
+	hz783 = 0x688b,		/* .99 G2  */
+	hz800 = 0x678d,
+	hz816 = 0x6698,
+	hz830 = 0x65bf,		/* .61 GS2 */
+	hz850 = 0x6484,
+	hz857 = 0x6414,
+	hz880 = 0x629f,		/* .00 A2  */
+	hz900 = 0x6154,
+	hz932 = 0x5f35,		/* .33 AS2 */
+	hz935 = 0x5f01,
+	hz941 = 0x5e9a,
+	hz942 = 0x5e88,
+	hz950 = 0x5dfd,
+	hz975 = 0x5c44,
+	hz1000 = 0x5a81,
+	hz1020 = 0x5912,
+	hz1050 = 0x56e2,
+	hz1100 = 0x5320,
+	hz1140 = 0x5007,
+	hz1200 = 0x4b3b,
+	hz1209 = 0x4a80,
+	hz1215 = 0x4a02,
+	hz1250 = 0x471c,
+	hz1300 = 0x42e0,
+	hz1330 = 0x4049,
+	hz1336 = 0x3fc4,
+	hz1366 = 0x3d22,
+	hz1380 = 0x3be4,
+	hz1400 = 0x3a1b,
+	hz1450 = 0x3596,
+	hz1477 = 0x331c,
+	hz1500 = 0x30fb,
+	hz1600 = 0x278d,
+	hz1633 = 0x2462,
+	hz1638 = 0x23e7,
+	hz1645 = 0x233a,
+	hz1750 = 0x18f8,
+	hz1800 = 0x1405,
+	hz1860 = 0xe0b,
+	hz2100 = 0xf5f6,
+	hz2130 = 0xf2f5,
+	hz2450 = 0xd3b3,
+	hz2750 = 0xb8e4
+} IXJ_FREQ;
+
+typedef enum {
+	C1 = hz261,
+	CS1 = hz277,
+	D1 = hz293,
+	DS1 = hz311,
+	E1 = hz329,
+	F1 = hz349,
+	FS1 = hz369,
+	G1 = hz392,
+	GS1 = hz415,
+	A1 = hz440,
+	AS1 = hz466,
+	B1 = hz493,
+	C2 = hz523,
+	CS2 = hz554,
+	D2 = hz587,
+	DS2 = hz622,
+	E2 = hz659,
+	F2 = hz698,
+	FS2 = hz739,
+	G2 = hz783,
+	GS2 = hz830,
+	A2 = hz880,
+	AS2 = hz932,
+} IXJ_NOTE;
+
+typedef struct {
+	int tone_index;
+	int freq0;
+	int gain0;
+	int freq1;
+	int gain1;
+} IXJ_TONE;
+
+#define IXJCTL_INIT_TONE		_IOW ('q', 0xC9, IXJ_TONE *)
+
+/******************************************************************************
+*
+* The IXJCTL_TONE_CADENCE ioctl defines tone sequences used for various
+* Call Progress Tones (CPT).  This is accomplished by setting up an array of
+* IXJ_CADENCE_ELEMENT structures that sequentially define the states of
+* the tone sequence.  The tone_on_time and tone_off time are in
+* 250 microsecond intervals.  A pointer to this array is passed to the
+* driver as the ce element of an IXJ_CADENCE structure.  The elements_used
+* must be set to the number of IXJ_CADENCE_ELEMENTS in the array.  The
+* termination variable defines what to do at the end of a cadence, the
+* options are to play the cadence once and stop, to repeat the last
+* element of the cadence indefinitely, or to repeat the entire cadence
+* indefinitely.  The ce variable is a pointer to the array of IXJ_TONE
+* structures.  If the freq0 variable is non-zero, the tone table contents
+* for the tone_index are updated to the frequencies and gains defined.  It
+* should be noted that DTMF tones cannot be reassigned, so if DTMF tone
+* table indexes are used in a cadence the frequency and gain variables will
+* be ignored.
+*
+* If the array elements contain frequency parameters the driver will
+* initialize the needed tone table elements and begin playing the tone,
+* there is no preset limit on the number of elements in the cadence.  If
+* there is more than one frequency used in the cadence, sequential elements
+* of different frequencies MUST use different tone table indexes.  Only one
+* cadence can be played at a time.  It is possible to build complex
+* cadences with multiple frequencies using 2 tone table indexes by
+* alternating between them.
+*
+******************************************************************************/
+
+typedef struct {
+	int index;
+	int tone_on_time;
+	int tone_off_time;
+	int freq0;
+	int gain0;
+	int freq1;
+	int gain1;
+} IXJ_CADENCE_ELEMENT;
+
+typedef enum {
+	PLAY_ONCE,
+	REPEAT_LAST_ELEMENT,
+	REPEAT_ALL
+} IXJ_CADENCE_TERM;
+
+typedef struct {
+	int elements_used;
+	IXJ_CADENCE_TERM termination;
+	IXJ_CADENCE_ELEMENT __user *ce;
+} IXJ_CADENCE;
+
+#define IXJCTL_TONE_CADENCE		_IOW ('q', 0xCA, IXJ_CADENCE *)
+/******************************************************************************
+*
+* This group of IOCTLs deal with the playback settings of the DSP
+*
+******************************************************************************/
+
+#define IXJCTL_PLAY_CODEC               PHONE_PLAY_CODEC
+#define IXJCTL_PLAY_START               PHONE_PLAY_START
+#define IXJCTL_PLAY_STOP                PHONE_PLAY_STOP
+#define IXJCTL_PLAY_DEPTH		PHONE_PLAY_DEPTH
+#define IXJCTL_PLAY_VOLUME		PHONE_PLAY_VOLUME
+#define IXJCTL_PLAY_LEVEL		PHONE_PLAY_LEVEL
+
+/******************************************************************************
+*
+* This group of IOCTLs deal with the Acoustic Echo Cancellation settings
+* of the DSP
+*
+* Issuing the IXJCTL_AEC_START command with a value of AEC_OFF has the
+* same effect as IXJCTL_AEC_STOP.  This is to simplify slider bar
+* controls.  IXJCTL_AEC_GET_LEVEL returns the current setting of the AEC.
+******************************************************************************/
+#define IXJCTL_AEC_START		_IOW ('q', 0xCB, int)
+#define IXJCTL_AEC_STOP			_IO  ('q', 0xCC)
+#define IXJCTL_AEC_GET_LEVEL		_IO  ('q', 0xCD)
+
+#define AEC_OFF   0
+#define AEC_LOW   1
+#define AEC_MED   2
+#define AEC_HIGH  3
+#define AEC_AUTO  4
+#define AEC_AGC   5
+/******************************************************************************
+*
+* Call Progress Tones, DTMF, etc.
+* IXJCTL_DTMF_OOB determines if DTMF signaling is sent as Out-Of-Band
+* only.  If you pass a 1, DTMF is suppressed from the audio stream.
+* Tone on and off times are in 250 microsecond intervals so
+* ioctl(ixj1, IXJCTL_SET_TONE_ON_TIME, 360);
+* will set the tone on time of board ixj1 to 360 * 250us = 90ms
+* the default values of tone on and off times is 840 or 210ms
+******************************************************************************/
+
+#define IXJCTL_DTMF_READY		PHONE_DTMF_READY
+#define IXJCTL_GET_DTMF                 PHONE_GET_DTMF
+#define IXJCTL_GET_DTMF_ASCII           PHONE_GET_DTMF_ASCII
+#define IXJCTL_DTMF_OOB			PHONE_DTMF_OOB
+#define IXJCTL_EXCEPTION		PHONE_EXCEPTION
+#define IXJCTL_PLAY_TONE		PHONE_PLAY_TONE
+#define IXJCTL_SET_TONE_ON_TIME		PHONE_SET_TONE_ON_TIME
+#define IXJCTL_SET_TONE_OFF_TIME	PHONE_SET_TONE_OFF_TIME
+#define IXJCTL_GET_TONE_ON_TIME		PHONE_GET_TONE_ON_TIME
+#define IXJCTL_GET_TONE_OFF_TIME	PHONE_GET_TONE_OFF_TIME
+#define IXJCTL_GET_TONE_STATE		PHONE_GET_TONE_STATE
+#define IXJCTL_BUSY			PHONE_BUSY
+#define IXJCTL_RINGBACK			PHONE_RINGBACK
+#define IXJCTL_DIALTONE			PHONE_DIALTONE
+#define IXJCTL_CPT_STOP			PHONE_CPT_STOP
+
+/******************************************************************************
+* LineJACK specific IOCTLs
+*
+* The lsb 4 bits of the LED argument represent the state of each of the 4
+* LED's on the LineJACK
+******************************************************************************/
+
+#define IXJCTL_SET_LED			_IOW ('q', 0xCE, int)
+#define IXJCTL_MIXER			_IOW ('q', 0xCF, int)
+
+/******************************************************************************
+* 
+* The master volume controls use attenuation with 32 levels from 0 to -62dB
+* with steps of 2dB each, the defines should be OR'ed together then sent
+* as the parameter to the mixer command to change the mixer settings.
+* 
+******************************************************************************/
+#define MIXER_MASTER_L		0x0000
+#define MIXER_MASTER_R		0x0100
+#define ATT00DB			0x00
+#define ATT02DB			0x01
+#define ATT04DB			0x02
+#define ATT06DB			0x03
+#define ATT08DB			0x04
+#define ATT10DB			0x05
+#define ATT12DB			0x06
+#define ATT14DB			0x07
+#define ATT16DB			0x08
+#define ATT18DB			0x09
+#define ATT20DB			0x0A
+#define ATT22DB			0x0B
+#define ATT24DB			0x0C
+#define ATT26DB			0x0D
+#define ATT28DB			0x0E
+#define ATT30DB			0x0F
+#define ATT32DB			0x10
+#define ATT34DB			0x11
+#define ATT36DB			0x12
+#define ATT38DB			0x13
+#define ATT40DB			0x14
+#define ATT42DB			0x15
+#define ATT44DB			0x16
+#define ATT46DB			0x17
+#define ATT48DB			0x18
+#define ATT50DB			0x19
+#define ATT52DB			0x1A
+#define ATT54DB			0x1B
+#define ATT56DB			0x1C
+#define ATT58DB			0x1D
+#define ATT60DB			0x1E
+#define ATT62DB			0x1F
+#define MASTER_MUTE		0x80
+
+/******************************************************************************
+* 
+* The input volume controls use gain with 32 levels from +12dB to -50dB
+* with steps of 2dB each, the defines should be OR'ed together then sent
+* as the parameter to the mixer command to change the mixer settings.
+* 
+******************************************************************************/
+#define MIXER_PORT_CD_L		0x0600
+#define MIXER_PORT_CD_R		0x0700
+#define MIXER_PORT_LINE_IN_L	0x0800
+#define MIXER_PORT_LINE_IN_R	0x0900
+#define MIXER_PORT_POTS_REC	0x0C00
+#define MIXER_PORT_MIC		0x0E00
+
+#define GAIN12DB		0x00
+#define GAIN10DB		0x01
+#define GAIN08DB		0x02
+#define GAIN06DB		0x03
+#define GAIN04DB		0x04
+#define GAIN02DB		0x05
+#define GAIN00DB		0x06
+#define GAIN_02DB		0x07
+#define GAIN_04DB		0x08
+#define GAIN_06DB		0x09
+#define GAIN_08DB		0x0A
+#define GAIN_10DB		0x0B
+#define GAIN_12DB		0x0C
+#define GAIN_14DB		0x0D
+#define GAIN_16DB		0x0E
+#define GAIN_18DB		0x0F
+#define GAIN_20DB		0x10
+#define GAIN_22DB		0x11
+#define GAIN_24DB		0x12
+#define GAIN_26DB		0x13
+#define GAIN_28DB		0x14
+#define GAIN_30DB		0x15
+#define GAIN_32DB		0x16
+#define GAIN_34DB		0x17
+#define GAIN_36DB		0x18
+#define GAIN_38DB		0x19
+#define GAIN_40DB		0x1A
+#define GAIN_42DB		0x1B
+#define GAIN_44DB		0x1C
+#define GAIN_46DB		0x1D
+#define GAIN_48DB		0x1E
+#define GAIN_50DB		0x1F
+#define INPUT_MUTE		0x80
+
+/******************************************************************************
+* 
+* The POTS volume control use attenuation with 8 levels from 0dB to -28dB
+* with steps of 4dB each, the defines should be OR'ed together then sent
+* as the parameter to the mixer command to change the mixer settings.
+* 
+******************************************************************************/
+#define MIXER_PORT_POTS_PLAY	0x0F00
+
+#define POTS_ATT_00DB		0x00
+#define POTS_ATT_04DB		0x01
+#define POTS_ATT_08DB		0x02
+#define POTS_ATT_12DB		0x03
+#define POTS_ATT_16DB		0x04
+#define POTS_ATT_20DB		0x05
+#define POTS_ATT_24DB		0x06
+#define POTS_ATT_28DB		0x07
+#define POTS_MUTE		0x80
+
+/******************************************************************************
+* 
+* The DAA controls the interface to the PSTN port.  The driver loads the
+* US coefficients by default, so if you live in a different country you
+* need to load the set for your countries phone system.
+* 
+******************************************************************************/
+#define IXJCTL_DAA_COEFF_SET		_IOW ('q', 0xD0, int)
+
+#define DAA_US 		1	/*PITA 8kHz */
+#define DAA_UK 		2	/*ISAR34 8kHz */
+#define DAA_FRANCE 	3	/* */
+#define DAA_GERMANY	4
+#define DAA_AUSTRALIA	5
+#define DAA_JAPAN	6
+
+/******************************************************************************
+* 
+* Use IXJCTL_PORT to set or query the port the card is set to.  If the
+* argument is set to PORT_QUERY, the return value of the ioctl will
+* indicate which port is currently in use, otherwise it will change the
+* port.
+* 
+******************************************************************************/
+#define IXJCTL_PORT			_IOW ('q', 0xD1, int)
+
+#define PORT_QUERY	0
+#define PORT_POTS	1
+#define PORT_PSTN	2
+#define PORT_SPEAKER	3
+#define PORT_HANDSET	4
+
+#define IXJCTL_PSTN_SET_STATE		PHONE_PSTN_SET_STATE
+#define IXJCTL_PSTN_GET_STATE		PHONE_PSTN_GET_STATE
+
+#define PSTN_ON_HOOK	0
+#define PSTN_RINGING	1
+#define PSTN_OFF_HOOK	2
+#define PSTN_PULSE_DIAL	3
+
+/******************************************************************************
+* 
+* The DAA Analog GAIN sets 2 parameters at one time, the receive gain (AGRR), 
+* and the transmit gain (AGX).  OR together the components and pass them
+* as the parameter to IXJCTL_DAA_AGAIN.  The default setting is both at 0dB.
+* 
+******************************************************************************/
+#define IXJCTL_DAA_AGAIN		_IOW ('q', 0xD2, int)
+
+#define AGRR00DB	0x00	/* Analog gain in receive direction 0dB */
+#define AGRR3_5DB	0x10	/* Analog gain in receive direction 3.5dB */
+#define AGRR06DB	0x30	/* Analog gain in receive direction 6dB */
+
+#define AGX00DB		0x00	/* Analog gain in transmit direction 0dB */
+#define AGX_6DB		0x04	/* Analog gain in transmit direction -6dB */
+#define AGX3_5DB	0x08	/* Analog gain in transmit direction 3.5dB */
+#define AGX_2_5B	0x0C	/* Analog gain in transmit direction -2.5dB */
+
+#define IXJCTL_PSTN_LINETEST		_IO  ('q', 0xD3)
+
+#define IXJCTL_CID			_IOR ('q', 0xD4, PHONE_CID *)
+#define IXJCTL_VMWI			_IOR ('q', 0xD8, int)
+#define IXJCTL_CIDCW			_IOW ('q', 0xD9, PHONE_CID *)
+/******************************************************************************
+* 
+* The wink duration is tunable with this ioctl.  The default wink duration  
+* is 320ms.  You do not need to use this ioctl if you do not require a
+* different wink duration.
+* 
+******************************************************************************/
+#define IXJCTL_WINK_DURATION		PHONE_WINK_DURATION
+
+/******************************************************************************
+* 
+* This ioctl will connect the POTS port to the PSTN port on the LineJACK
+* In order for this to work properly the port selection should be set to
+* the PSTN port with IXJCTL_PORT prior to calling this ioctl.  This will
+* enable conference calls between PSTN callers and network callers.
+* Passing a 1 to this ioctl enables the POTS<->PSTN connection while
+* passing a 0 turns it back off.
+* 
+******************************************************************************/
+#define IXJCTL_POTS_PSTN		_IOW ('q', 0xD5, int)
+
+/******************************************************************************
+*
+* IOCTLs added by request.
+*
+* IXJCTL_HZ sets the value your Linux kernel uses for HZ as defined in
+*           /usr/include/asm/param.h, this determines the fundamental
+*           frequency of the clock ticks on your Linux system.  The kernel
+*           must be rebuilt if you change this value, also all modules you
+*           use (except this one) must be recompiled.  The default value
+*           is 100, and you only need to use this IOCTL if you use some
+*           other value.
+*
+*
+* IXJCTL_RATE sets the number of times per second that the driver polls
+*             the DSP.  This value cannot be larger than HZ.  By
+*             increasing both of these values, you may be able to reduce
+*             latency because the max hang time that can exist between the
+*             driver and the DSP will be reduced.
+*
+******************************************************************************/
+
+#define IXJCTL_HZ                       _IOW ('q', 0xE0, int)
+#define IXJCTL_RATE                     _IOW ('q', 0xE1, int)
+#define IXJCTL_FRAMES_READ		_IOR ('q', 0xE2, unsigned long)
+#define IXJCTL_FRAMES_WRITTEN		_IOR ('q', 0xE3, unsigned long)
+#define IXJCTL_READ_WAIT		_IOR ('q', 0xE4, unsigned long)
+#define IXJCTL_WRITE_WAIT		_IOR ('q', 0xE5, unsigned long)
+#define IXJCTL_DRYBUFFER_READ		_IOR ('q', 0xE6, unsigned long)
+#define IXJCTL_DRYBUFFER_CLEAR		_IO  ('q', 0xE7)
+#define IXJCTL_DTMF_PRESCALE		_IOW ('q', 0xE8, int)
+
+/******************************************************************************
+*
+* This ioctl allows the user application to control what events the driver
+* will send signals for, and what signals it will send for which event.
+* By default, if signaling is enabled, all events will send SIGIO when
+* they occur.  To disable signals for an event set the signal to 0.
+*
+******************************************************************************/
+typedef enum {
+	SIG_DTMF_READY,
+	SIG_HOOKSTATE,
+	SIG_FLASH,
+	SIG_PSTN_RING,
+	SIG_CALLER_ID,
+	SIG_PSTN_WINK,
+	SIG_F0, SIG_F1, SIG_F2, SIG_F3,
+	SIG_FC0, SIG_FC1, SIG_FC2, SIG_FC3,
+	SIG_READ_READY = 33,
+	SIG_WRITE_READY = 34
+} IXJ_SIGEVENT;
+
+typedef struct {
+	unsigned int event;
+	int signal;
+} IXJ_SIGDEF;
+
+#define IXJCTL_SIGCTL			_IOW ('q', 0xE9, IXJ_SIGDEF *)
+
+/******************************************************************************
+*
+* These ioctls allow the user application to change the gain in the 
+* Smart Cable of the Internet Phone Card.  Sending -1 as a value will cause
+* return value to be the current setting.  Valid values to set are 0x00 - 0x1F
+*
+* 11111 = +12 dB
+* 10111 =   0 dB
+* 00000 = -34.5 dB
+*
+* IXJCTL_SC_RXG sets the Receive gain
+* IXJCTL_SC_TXG sets the Transmit gain
+*
+******************************************************************************/
+#define IXJCTL_SC_RXG			_IOW ('q', 0xEA, int)
+#define IXJCTL_SC_TXG			_IOW ('q', 0xEB, int)
+
+/******************************************************************************
+*
+* The intercom IOCTL's short the output from one card to the input of the
+* other and vice versa (actually done in the DSP read function).  It is only
+* necessary to execute the IOCTL on one card, but it is necessary to have
+* both devices open to be able to detect hook switch changes.  The record
+* codec and rate of each card must match the playback codec and rate of
+* the other card for this to work properly.
+*
+******************************************************************************/
+
+#define IXJCTL_INTERCOM_START 		_IOW ('q', 0xFD, int)
+#define IXJCTL_INTERCOM_STOP  		_IOW ('q', 0xFE, int)
+
+/******************************************************************************
+ *
+ * new structure for accessing raw filter information
+ *
+ ******************************************************************************/
+
+typedef struct {
+	unsigned int filter;
+	char enable;
+	unsigned int coeff[19];
+} IXJ_FILTER_RAW;
+
+#endif
diff --git a/include/uapi/linux/jffs2.h b/include/uapi/linux/jffs2.h
new file mode 100644
index 00000000000..a18b719f49d
--- /dev/null
+++ b/include/uapi/linux/jffs2.h
@@ -0,0 +1,223 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * Created by David Woodhouse <dwmw2@infradead.org>
+ *
+ * For licensing information, see the file 'LICENCE' in the
+ * jffs2 directory.
+ */
+
+#ifndef __LINUX_JFFS2_H__
+#define __LINUX_JFFS2_H__
+
+#include <linux/types.h>
+#include <linux/magic.h>
+
+/* You must include something which defines the C99 uintXX_t types. 
+   We don't do it from here because this file is used in too many
+   different environments. */
+
+/* Values we may expect to find in the 'magic' field */
+#define JFFS2_OLD_MAGIC_BITMASK 0x1984
+#define JFFS2_MAGIC_BITMASK 0x1985
+#define KSAMTIB_CIGAM_2SFFJ 0x8519 /* For detecting wrong-endian fs */
+#define JFFS2_EMPTY_BITMASK 0xffff
+#define JFFS2_DIRTY_BITMASK 0x0000
+
+/* Summary node MAGIC marker */
+#define JFFS2_SUM_MAGIC	0x02851885
+
+/* We only allow a single char for length, and 0xFF is empty flash so
+   we don't want it confused with a real length. Hence max 254.
+*/
+#define JFFS2_MAX_NAME_LEN 254
+
+/* How small can we sensibly write nodes? */
+#define JFFS2_MIN_DATA_LEN 128
+
+#define JFFS2_COMPR_NONE	0x00
+#define JFFS2_COMPR_ZERO	0x01
+#define JFFS2_COMPR_RTIME	0x02
+#define JFFS2_COMPR_RUBINMIPS	0x03
+#define JFFS2_COMPR_COPY	0x04
+#define JFFS2_COMPR_DYNRUBIN	0x05
+#define JFFS2_COMPR_ZLIB	0x06
+#define JFFS2_COMPR_LZO		0x07
+/* Compatibility flags. */
+#define JFFS2_COMPAT_MASK 0xc000      /* What do to if an unknown nodetype is found */
+#define JFFS2_NODE_ACCURATE 0x2000
+/* INCOMPAT: Fail to mount the filesystem */
+#define JFFS2_FEATURE_INCOMPAT 0xc000
+/* ROCOMPAT: Mount read-only */
+#define JFFS2_FEATURE_ROCOMPAT 0x8000
+/* RWCOMPAT_COPY: Mount read/write, and copy the node when it's GC'd */
+#define JFFS2_FEATURE_RWCOMPAT_COPY 0x4000
+/* RWCOMPAT_DELETE: Mount read/write, and delete the node when it's GC'd */
+#define JFFS2_FEATURE_RWCOMPAT_DELETE 0x0000
+
+#define JFFS2_NODETYPE_DIRENT (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 1)
+#define JFFS2_NODETYPE_INODE (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 2)
+#define JFFS2_NODETYPE_CLEANMARKER (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 3)
+#define JFFS2_NODETYPE_PADDING (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 4)
+
+#define JFFS2_NODETYPE_SUMMARY (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 6)
+
+#define JFFS2_NODETYPE_XATTR (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 8)
+#define JFFS2_NODETYPE_XREF (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 9)
+
+/* XATTR Related */
+#define JFFS2_XPREFIX_USER		1	/* for "user." */
+#define JFFS2_XPREFIX_SECURITY		2	/* for "security." */
+#define JFFS2_XPREFIX_ACL_ACCESS	3	/* for "system.posix_acl_access" */
+#define JFFS2_XPREFIX_ACL_DEFAULT	4	/* for "system.posix_acl_default" */
+#define JFFS2_XPREFIX_TRUSTED		5	/* for "trusted.*" */
+
+#define JFFS2_ACL_VERSION		0x0001
+
+// Maybe later...
+//#define JFFS2_NODETYPE_CHECKPOINT (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 3)
+//#define JFFS2_NODETYPE_OPTIONS (JFFS2_FEATURE_RWCOMPAT_COPY | JFFS2_NODE_ACCURATE | 4)
+
+
+#define JFFS2_INO_FLAG_PREREAD	  1	/* Do read_inode() for this one at
+					   mount time, don't wait for it to
+					   happen later */
+#define JFFS2_INO_FLAG_USERCOMPR  2	/* User has requested a specific
+					   compression type */
+
+
+/* These can go once we've made sure we've caught all uses without
+   byteswapping */
+
+typedef struct {
+	__u32 v32;
+} __attribute__((packed)) jint32_t;
+
+typedef struct {
+	__u32 m;
+} __attribute__((packed)) jmode_t;
+
+typedef struct {
+	__u16 v16;
+} __attribute__((packed)) jint16_t;
+
+struct jffs2_unknown_node
+{
+	/* All start like this */
+	jint16_t magic;
+	jint16_t nodetype;
+	jint32_t totlen; /* So we can skip over nodes we don't grok */
+	jint32_t hdr_crc;
+};
+
+struct jffs2_raw_dirent
+{
+	jint16_t magic;
+	jint16_t nodetype;	/* == JFFS2_NODETYPE_DIRENT */
+	jint32_t totlen;
+	jint32_t hdr_crc;
+	jint32_t pino;
+	jint32_t version;
+	jint32_t ino; /* == zero for unlink */
+	jint32_t mctime;
+	__u8 nsize;
+	__u8 type;
+	__u8 unused[2];
+	jint32_t node_crc;
+	jint32_t name_crc;
+	__u8 name[0];
+};
+
+/* The JFFS2 raw inode structure: Used for storage on physical media.  */
+/* The uid, gid, atime, mtime and ctime members could be longer, but
+   are left like this for space efficiency. If and when people decide
+   they really need them extended, it's simple enough to add support for
+   a new type of raw node.
+*/
+struct jffs2_raw_inode
+{
+	jint16_t magic;      /* A constant magic number.  */
+	jint16_t nodetype;   /* == JFFS2_NODETYPE_INODE */
+	jint32_t totlen;     /* Total length of this node (inc data, etc.) */
+	jint32_t hdr_crc;
+	jint32_t ino;        /* Inode number.  */
+	jint32_t version;    /* Version number.  */
+	jmode_t mode;       /* The file's type or mode.  */
+	jint16_t uid;        /* The file's owner.  */
+	jint16_t gid;        /* The file's group.  */
+	jint32_t isize;      /* Total resultant size of this inode (used for truncations)  */
+	jint32_t atime;      /* Last access time.  */
+	jint32_t mtime;      /* Last modification time.  */
+	jint32_t ctime;      /* Change time.  */
+	jint32_t offset;     /* Where to begin to write.  */
+	jint32_t csize;      /* (Compressed) data size */
+	jint32_t dsize;	     /* Size of the node's data. (after decompression) */
+	__u8 compr;       /* Compression algorithm used */
+	__u8 usercompr;   /* Compression algorithm requested by the user */
+	jint16_t flags;	     /* See JFFS2_INO_FLAG_* */
+	jint32_t data_crc;   /* CRC for the (compressed) data.  */
+	jint32_t node_crc;   /* CRC for the raw inode (excluding data)  */
+	__u8 data[0];
+};
+
+struct jffs2_raw_xattr {
+	jint16_t magic;
+	jint16_t nodetype;	/* = JFFS2_NODETYPE_XATTR */
+	jint32_t totlen;
+	jint32_t hdr_crc;
+	jint32_t xid;		/* XATTR identifier number */
+	jint32_t version;
+	__u8 xprefix;
+	__u8 name_len;
+	jint16_t value_len;
+	jint32_t data_crc;
+	jint32_t node_crc;
+	__u8 data[0];
+} __attribute__((packed));
+
+struct jffs2_raw_xref
+{
+	jint16_t magic;
+	jint16_t nodetype;	/* = JFFS2_NODETYPE_XREF */
+	jint32_t totlen;
+	jint32_t hdr_crc;
+	jint32_t ino;		/* inode number */
+	jint32_t xid;		/* XATTR identifier number */
+	jint32_t xseqno;	/* xref sequential number */
+	jint32_t node_crc;
+} __attribute__((packed));
+
+struct jffs2_raw_summary
+{
+	jint16_t magic;
+	jint16_t nodetype; 	/* = JFFS2_NODETYPE_SUMMARY */
+	jint32_t totlen;
+	jint32_t hdr_crc;
+	jint32_t sum_num;	/* number of sum entries*/
+	jint32_t cln_mkr;	/* clean marker size, 0 = no cleanmarker */
+	jint32_t padded;	/* sum of the size of padding nodes */
+	jint32_t sum_crc;	/* summary information crc */
+	jint32_t node_crc; 	/* node crc */
+	jint32_t sum[0]; 	/* inode summary info */
+};
+
+union jffs2_node_union
+{
+	struct jffs2_raw_inode i;
+	struct jffs2_raw_dirent d;
+	struct jffs2_raw_xattr x;
+	struct jffs2_raw_xref r;
+	struct jffs2_raw_summary s;
+	struct jffs2_unknown_node u;
+};
+
+/* Data payload for device nodes. */
+union jffs2_device_node {
+	jint16_t old_id;
+	jint32_t new_id;
+};
+
+#endif /* __LINUX_JFFS2_H__ */
diff --git a/include/uapi/linux/joystick.h b/include/uapi/linux/joystick.h
new file mode 100644
index 00000000000..b856fd11c70
--- /dev/null
+++ b/include/uapi/linux/joystick.h
@@ -0,0 +1,136 @@
+/*
+ *  Copyright (C) 1996-2000 Vojtech Pavlik
+ *
+ *  Sponsored by SuSE
+ */
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or 
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * 
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail:
+ * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic
+ */
+#ifndef _UAPI_LINUX_JOYSTICK_H
+#define _UAPI_LINUX_JOYSTICK_H
+
+
+
+#include <linux/types.h>
+#include <linux/input.h>
+
+/*
+ * Version
+ */
+
+#define JS_VERSION		0x020100
+
+/*
+ * Types and constants for reading from /dev/js
+ */
+
+#define JS_EVENT_BUTTON		0x01	/* button pressed/released */
+#define JS_EVENT_AXIS		0x02	/* joystick moved */
+#define JS_EVENT_INIT		0x80	/* initial state of device */
+
+struct js_event {
+	__u32 time;	/* event timestamp in milliseconds */
+	__s16 value;	/* value */
+	__u8 type;	/* event type */
+	__u8 number;	/* axis/button number */
+};
+
+/*
+ * IOCTL commands for joystick driver
+ */
+
+#define JSIOCGVERSION		_IOR('j', 0x01, __u32)				/* get driver version */
+
+#define JSIOCGAXES		_IOR('j', 0x11, __u8)				/* get number of axes */
+#define JSIOCGBUTTONS		_IOR('j', 0x12, __u8)				/* get number of buttons */
+#define JSIOCGNAME(len)		_IOC(_IOC_READ, 'j', 0x13, len)			/* get identifier string */
+
+#define JSIOCSCORR		_IOW('j', 0x21, struct js_corr)			/* set correction values */
+#define JSIOCGCORR		_IOR('j', 0x22, struct js_corr)			/* get correction values */
+
+#define JSIOCSAXMAP		_IOW('j', 0x31, __u8[ABS_CNT])			/* set axis mapping */
+#define JSIOCGAXMAP		_IOR('j', 0x32, __u8[ABS_CNT])			/* get axis mapping */
+#define JSIOCSBTNMAP		_IOW('j', 0x33, __u16[KEY_MAX - BTN_MISC + 1])	/* set button mapping */
+#define JSIOCGBTNMAP		_IOR('j', 0x34, __u16[KEY_MAX - BTN_MISC + 1])	/* get button mapping */
+
+/*
+ * Types and constants for get/set correction
+ */
+
+#define JS_CORR_NONE		0x00	/* returns raw values */
+#define JS_CORR_BROKEN		0x01	/* broken line */
+
+struct js_corr {
+	__s32 coef[8];
+	__s16 prec;
+	__u16 type;
+};
+
+/*
+ * v0.x compatibility definitions
+ */
+
+#define JS_RETURN		sizeof(struct JS_DATA_TYPE)
+#define JS_TRUE			1
+#define JS_FALSE		0
+#define JS_X_0			0x01
+#define JS_Y_0			0x02
+#define JS_X_1			0x04
+#define JS_Y_1			0x08
+#define JS_MAX			2
+
+#define JS_DEF_TIMEOUT		0x1300
+#define JS_DEF_CORR		0
+#define JS_DEF_TIMELIMIT	10L
+
+#define JS_SET_CAL		1
+#define JS_GET_CAL		2
+#define JS_SET_TIMEOUT		3
+#define JS_GET_TIMEOUT		4
+#define JS_SET_TIMELIMIT	5
+#define JS_GET_TIMELIMIT	6
+#define JS_GET_ALL		7
+#define JS_SET_ALL		8
+
+struct JS_DATA_TYPE {
+	__s32 buttons;
+	__s32 x;
+	__s32 y;
+};
+
+struct JS_DATA_SAVE_TYPE_32 {
+	__s32 JS_TIMEOUT;
+	__s32 BUSY;
+	__s32 JS_EXPIRETIME;
+	__s32 JS_TIMELIMIT;
+	struct JS_DATA_TYPE JS_SAVE;
+	struct JS_DATA_TYPE JS_CORR;
+};
+
+struct JS_DATA_SAVE_TYPE_64 {
+	__s32 JS_TIMEOUT;
+	__s32 BUSY;
+	__s64 JS_EXPIRETIME;
+	__s64 JS_TIMELIMIT;
+	struct JS_DATA_TYPE JS_SAVE;
+	struct JS_DATA_TYPE JS_CORR;
+};
+
+
+#endif /* _UAPI_LINUX_JOYSTICK_H */
diff --git a/include/uapi/linux/kd.h b/include/uapi/linux/kd.h
new file mode 100644
index 00000000000..87b7cc439d7
--- /dev/null
+++ b/include/uapi/linux/kd.h
@@ -0,0 +1,183 @@
+#ifndef _UAPI_LINUX_KD_H
+#define _UAPI_LINUX_KD_H
+#include <linux/types.h>
+#include <linux/compiler.h>
+
+/* 0x4B is 'K', to avoid collision with termios and vt */
+
+#define GIO_FONT	0x4B60	/* gets font in expanded form */
+#define PIO_FONT	0x4B61	/* use font in expanded form */
+
+#define GIO_FONTX	0x4B6B	/* get font using struct consolefontdesc */
+#define PIO_FONTX	0x4B6C	/* set font using struct consolefontdesc */
+struct consolefontdesc {
+	unsigned short charcount;	/* characters in font (256 or 512) */
+	unsigned short charheight;	/* scan lines per character (1-32) */
+	char __user *chardata;		/* font data in expanded form */
+};
+
+#define PIO_FONTRESET   0x4B6D	/* reset to default font */
+
+#define GIO_CMAP	0x4B70	/* gets colour palette on VGA+ */
+#define PIO_CMAP	0x4B71	/* sets colour palette on VGA+ */
+
+#define KIOCSOUND	0x4B2F	/* start sound generation (0 for off) */
+#define KDMKTONE	0x4B30	/* generate tone */
+
+#define KDGETLED	0x4B31	/* return current led state */
+#define KDSETLED	0x4B32	/* set led state [lights, not flags] */
+#define 	LED_SCR		0x01	/* scroll lock led */
+#define 	LED_NUM		0x02	/* num lock led */
+#define 	LED_CAP		0x04	/* caps lock led */
+
+#define KDGKBTYPE	0x4B33	/* get keyboard type */
+#define 	KB_84		0x01
+#define 	KB_101		0x02 	/* this is what we always answer */
+#define 	KB_OTHER	0x03
+
+#define KDADDIO		0x4B34	/* add i/o port as valid */
+#define KDDELIO		0x4B35	/* del i/o port as valid */
+#define KDENABIO	0x4B36	/* enable i/o to video board */
+#define KDDISABIO	0x4B37	/* disable i/o to video board */
+
+#define KDSETMODE	0x4B3A	/* set text/graphics mode */
+#define		KD_TEXT		0x00
+#define		KD_GRAPHICS	0x01
+#define		KD_TEXT0	0x02	/* obsolete */
+#define		KD_TEXT1	0x03	/* obsolete */
+#define KDGETMODE	0x4B3B	/* get current mode */
+
+#define KDMAPDISP	0x4B3C	/* map display into address space */
+#define KDUNMAPDISP	0x4B3D	/* unmap display from address space */
+
+typedef char scrnmap_t;
+#define		E_TABSZ		256
+#define GIO_SCRNMAP	0x4B40	/* get screen mapping from kernel */
+#define PIO_SCRNMAP	0x4B41	/* put screen mapping table in kernel */
+#define GIO_UNISCRNMAP  0x4B69	/* get full Unicode screen mapping */
+#define PIO_UNISCRNMAP  0x4B6A  /* set full Unicode screen mapping */
+
+#define GIO_UNIMAP	0x4B66	/* get unicode-to-font mapping from kernel */
+struct unipair {
+	unsigned short unicode;
+	unsigned short fontpos;
+};
+struct unimapdesc {
+	unsigned short entry_ct;
+	struct unipair __user *entries;
+};
+#define PIO_UNIMAP	0x4B67	/* put unicode-to-font mapping in kernel */
+#define PIO_UNIMAPCLR	0x4B68	/* clear table, possibly advise hash algorithm */
+struct unimapinit {
+	unsigned short advised_hashsize;  /* 0 if no opinion */
+	unsigned short advised_hashstep;  /* 0 if no opinion */
+	unsigned short advised_hashlevel; /* 0 if no opinion */
+};
+
+#define UNI_DIRECT_BASE 0xF000	/* start of Direct Font Region */
+#define UNI_DIRECT_MASK 0x01FF	/* Direct Font Region bitmask */
+
+#define		K_RAW		0x00
+#define		K_XLATE		0x01
+#define		K_MEDIUMRAW	0x02
+#define		K_UNICODE	0x03
+#define		K_OFF		0x04
+#define KDGKBMODE	0x4B44	/* gets current keyboard mode */
+#define KDSKBMODE	0x4B45	/* sets current keyboard mode */
+
+#define		K_METABIT	0x03
+#define		K_ESCPREFIX	0x04
+#define KDGKBMETA	0x4B62	/* gets meta key handling mode */
+#define KDSKBMETA	0x4B63	/* sets meta key handling mode */
+
+#define		K_SCROLLLOCK	0x01
+#define		K_NUMLOCK	0x02
+#define		K_CAPSLOCK	0x04
+#define	KDGKBLED	0x4B64	/* get led flags (not lights) */
+#define	KDSKBLED	0x4B65	/* set led flags (not lights) */
+
+struct kbentry {
+	unsigned char kb_table;
+	unsigned char kb_index;
+	unsigned short kb_value;
+};
+#define		K_NORMTAB	0x00
+#define		K_SHIFTTAB	0x01
+#define		K_ALTTAB	0x02
+#define		K_ALTSHIFTTAB	0x03
+
+#define KDGKBENT	0x4B46	/* gets one entry in translation table */
+#define KDSKBENT	0x4B47	/* sets one entry in translation table */
+
+struct kbsentry {
+	unsigned char kb_func;
+	unsigned char kb_string[512];
+};
+#define KDGKBSENT	0x4B48	/* gets one function key string entry */
+#define KDSKBSENT	0x4B49	/* sets one function key string entry */
+
+struct kbdiacr {
+        unsigned char diacr, base, result;
+};
+struct kbdiacrs {
+        unsigned int kb_cnt;    /* number of entries in following array */
+	struct kbdiacr kbdiacr[256];    /* MAX_DIACR from keyboard.h */
+};
+#define KDGKBDIACR      0x4B4A  /* read kernel accent table */
+#define KDSKBDIACR      0x4B4B  /* write kernel accent table */
+
+struct kbdiacruc {
+	unsigned int diacr, base, result;
+};
+struct kbdiacrsuc {
+        unsigned int kb_cnt;    /* number of entries in following array */
+	struct kbdiacruc kbdiacruc[256];    /* MAX_DIACR from keyboard.h */
+};
+#define KDGKBDIACRUC    0x4BFA  /* read kernel accent table - UCS */
+#define KDSKBDIACRUC    0x4BFB  /* write kernel accent table - UCS */
+
+struct kbkeycode {
+	unsigned int scancode, keycode;
+};
+#define KDGETKEYCODE	0x4B4C	/* read kernel keycode table entry */
+#define KDSETKEYCODE	0x4B4D	/* write kernel keycode table entry */
+
+#define KDSIGACCEPT	0x4B4E	/* accept kbd generated signals */
+
+struct kbd_repeat {
+	int delay;	/* in msec; <= 0: don't change */
+	int period;	/* in msec; <= 0: don't change */
+			/* earlier this field was misnamed "rate" */
+};
+
+#define KDKBDREP        0x4B52  /* set keyboard delay/repeat rate;
+				 * actually used values are returned */
+
+#define KDFONTOP	0x4B72	/* font operations */
+
+struct console_font_op {
+	unsigned int op;	/* operation code KD_FONT_OP_* */
+	unsigned int flags;	/* KD_FONT_FLAG_* */
+	unsigned int width, height;	/* font size */
+	unsigned int charcount;
+	unsigned char __user *data;	/* font data with height fixed to 32 */
+};
+
+struct console_font {
+	unsigned int width, height;	/* font size */
+	unsigned int charcount;
+	unsigned char *data;	/* font data with height fixed to 32 */
+};
+
+#define KD_FONT_OP_SET		0	/* Set font */
+#define KD_FONT_OP_GET		1	/* Get font */
+#define KD_FONT_OP_SET_DEFAULT	2	/* Set font to default, data points to name / NULL */
+#define KD_FONT_OP_COPY		3	/* Copy from another console */
+
+#define KD_FONT_FLAG_DONT_RECALC 	1	/* Don't recalculate hw charcell size [compat] */
+
+/* note: 0x4B00-0x4B4E all have had a value at some time;
+   don't reuse for the time being */
+/* note: 0x4B60-0x4B6D, 0x4B70-0x4B72 used above */
+
+#endif /* _UAPI_LINUX_KD_H */
diff --git a/include/uapi/linux/kdev_t.h b/include/uapi/linux/kdev_t.h
new file mode 100644
index 00000000000..0d881fa7eb9
--- /dev/null
+++ b/include/uapi/linux/kdev_t.h
@@ -0,0 +1,13 @@
+#ifndef _UAPI_LINUX_KDEV_T_H
+#define _UAPI_LINUX_KDEV_T_H
+#ifndef __KERNEL__
+
+/*
+Some programs want their definitions of MAJOR and MINOR and MKDEV
+from the kernel sources. These must be the externally visible ones.
+*/
+#define MAJOR(dev)	((dev)>>8)
+#define MINOR(dev)	((dev) & 0xff)
+#define MKDEV(ma,mi)	((ma)<<8 | (mi))
+#endif /* __KERNEL__ */
+#endif /* _UAPI_LINUX_KDEV_T_H */
diff --git a/include/uapi/linux/kernel-page-flags.h b/include/uapi/linux/kernel-page-flags.h
new file mode 100644
index 00000000000..5116a0e4817
--- /dev/null
+++ b/include/uapi/linux/kernel-page-flags.h
@@ -0,0 +1,36 @@
+#ifndef _UAPILINUX_KERNEL_PAGE_FLAGS_H
+#define _UAPILINUX_KERNEL_PAGE_FLAGS_H
+
+/*
+ * Stable page flag bits exported to user space
+ */
+
+#define KPF_LOCKED		0
+#define KPF_ERROR		1
+#define KPF_REFERENCED		2
+#define KPF_UPTODATE		3
+#define KPF_DIRTY		4
+#define KPF_LRU			5
+#define KPF_ACTIVE		6
+#define KPF_SLAB		7
+#define KPF_WRITEBACK		8
+#define KPF_RECLAIM		9
+#define KPF_BUDDY		10
+
+/* 11-20: new additions in 2.6.31 */
+#define KPF_MMAP		11
+#define KPF_ANON		12
+#define KPF_SWAPCACHE		13
+#define KPF_SWAPBACKED		14
+#define KPF_COMPOUND_HEAD	15
+#define KPF_COMPOUND_TAIL	16
+#define KPF_HUGE		17
+#define KPF_UNEVICTABLE		18
+#define KPF_HWPOISON		19
+#define KPF_NOPAGE		20
+
+#define KPF_KSM			21
+#define KPF_THP			22
+
+
+#endif /* _UAPILINUX_KERNEL_PAGE_FLAGS_H */
diff --git a/include/uapi/linux/kernel.h b/include/uapi/linux/kernel.h
new file mode 100644
index 00000000000..321e399457f
--- /dev/null
+++ b/include/uapi/linux/kernel.h
@@ -0,0 +1,13 @@
+#ifndef _UAPI_LINUX_KERNEL_H
+#define _UAPI_LINUX_KERNEL_H
+
+#include <linux/sysinfo.h>
+
+/*
+ * 'kernel.h' contains some often-used function prototypes etc
+ */
+#define __ALIGN_KERNEL(x, a)		__ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1)
+#define __ALIGN_KERNEL_MASK(x, mask)	(((x) + (mask)) & ~(mask))
+
+
+#endif /* _UAPI_LINUX_KERNEL_H */
diff --git a/include/uapi/linux/kernelcapi.h b/include/uapi/linux/kernelcapi.h
new file mode 100644
index 00000000000..89bf40d36d2
--- /dev/null
+++ b/include/uapi/linux/kernelcapi.h
@@ -0,0 +1,47 @@
+/*
+ * $Id: kernelcapi.h,v 1.8.6.2 2001/02/07 11:31:31 kai Exp $
+ * 
+ * Kernel CAPI 2.0 Interface for Linux
+ * 
+ * (c) Copyright 1997 by Carsten Paeth (calle@calle.in-berlin.de)
+ * 
+ */
+
+#ifndef _UAPI__KERNELCAPI_H__
+#define _UAPI__KERNELCAPI_H__
+
+#define CAPI_MAXAPPL	240	/* maximum number of applications  */
+#define CAPI_MAXCONTR	32	/* maximum number of controller    */
+#define CAPI_MAXDATAWINDOW	8
+
+
+typedef struct kcapi_flagdef {
+	int contr;
+	int flag;
+} kcapi_flagdef;
+
+typedef struct kcapi_carddef {
+	char		driver[32];
+	unsigned int	port;
+	unsigned	irq;
+	unsigned int	membase;
+	int		cardnr;
+} kcapi_carddef;
+
+/* new ioctls >= 10 */
+#define KCAPI_CMD_TRACE		10
+#define KCAPI_CMD_ADDCARD	11	/* OBSOLETE */
+
+/* 
+ * flag > 2 => trace also data
+ * flag & 1 => show trace
+ */
+#define KCAPI_TRACE_OFF			0
+#define KCAPI_TRACE_SHORT_NO_DATA	1
+#define KCAPI_TRACE_FULL_NO_DATA	2
+#define KCAPI_TRACE_SHORT		3
+#define KCAPI_TRACE_FULL		4
+
+
+
+#endif /* _UAPI__KERNELCAPI_H__ */
diff --git a/include/uapi/linux/kexec.h b/include/uapi/linux/kexec.h
new file mode 100644
index 00000000000..104838f65bc
--- /dev/null
+++ b/include/uapi/linux/kexec.h
@@ -0,0 +1,54 @@
+#ifndef _UAPILINUX_KEXEC_H
+#define _UAPILINUX_KEXEC_H
+
+/* kexec system call -  It loads the new kernel to boot into.
+ * kexec does not sync, or unmount filesystems so if you need
+ * that to happen you need to do that yourself.
+ */
+
+#include <linux/types.h>
+
+/* kexec flags for different usage scenarios */
+#define KEXEC_ON_CRASH		0x00000001
+#define KEXEC_PRESERVE_CONTEXT	0x00000002
+#define KEXEC_ARCH_MASK		0xffff0000
+
+/* These values match the ELF architecture values.
+ * Unless there is a good reason that should continue to be the case.
+ */
+#define KEXEC_ARCH_DEFAULT ( 0 << 16)
+#define KEXEC_ARCH_386     ( 3 << 16)
+#define KEXEC_ARCH_X86_64  (62 << 16)
+#define KEXEC_ARCH_PPC     (20 << 16)
+#define KEXEC_ARCH_PPC64   (21 << 16)
+#define KEXEC_ARCH_IA_64   (50 << 16)
+#define KEXEC_ARCH_ARM     (40 << 16)
+#define KEXEC_ARCH_S390    (22 << 16)
+#define KEXEC_ARCH_SH      (42 << 16)
+#define KEXEC_ARCH_MIPS_LE (10 << 16)
+#define KEXEC_ARCH_MIPS    ( 8 << 16)
+
+/* The artificial cap on the number of segments passed to kexec_load. */
+#define KEXEC_SEGMENT_MAX 16
+
+#ifndef __KERNEL__
+/*
+ * This structure is used to hold the arguments that are used when
+ * loading  kernel binaries.
+ */
+struct kexec_segment {
+	const void *buf;
+	size_t bufsz;
+	const void *mem;
+	size_t memsz;
+};
+
+/* Load a new kernel image as described by the kexec_segment array
+ * consisting of passed number of segments at the entry-point address.
+ * The flags allow different useage types.
+ */
+extern int kexec_load(void *, size_t, struct kexec_segment *,
+		unsigned long int);
+#endif /* __KERNEL__ */
+
+#endif /* _UAPILINUX_KEXEC_H */
diff --git a/include/uapi/linux/keyboard.h b/include/uapi/linux/keyboard.h
new file mode 100644
index 00000000000..5a6849721ab
--- /dev/null
+++ b/include/uapi/linux/keyboard.h
@@ -0,0 +1,443 @@
+#ifndef _UAPI__LINUX_KEYBOARD_H
+#define _UAPI__LINUX_KEYBOARD_H
+
+#include <linux/wait.h>
+
+#define KG_SHIFT	0
+#define KG_CTRL		2
+#define KG_ALT		3
+#define KG_ALTGR	1
+#define KG_SHIFTL	4
+#define KG_KANASHIFT	4
+#define KG_SHIFTR	5
+#define KG_CTRLL	6
+#define KG_CTRLR	7
+#define KG_CAPSSHIFT	8
+
+#define NR_SHIFT	9
+
+#define NR_KEYS		256
+#define MAX_NR_KEYMAPS	256
+/* This means 128Kb if all keymaps are allocated. Only the superuser
+	may increase the number of keymaps beyond MAX_NR_OF_USER_KEYMAPS. */
+#define MAX_NR_OF_USER_KEYMAPS 256 	/* should be at least 7 */
+
+
+#define MAX_NR_FUNC	256	/* max nr of strings assigned to keys */
+
+#define KT_LATIN	0	/* we depend on this being zero */
+#define KT_LETTER	11	/* symbol that can be acted upon by CapsLock */
+#define KT_FN		1
+#define KT_SPEC		2
+#define KT_PAD		3
+#define KT_DEAD		4
+#define KT_CONS		5
+#define KT_CUR		6
+#define KT_SHIFT	7
+#define KT_META		8
+#define KT_ASCII	9
+#define KT_LOCK		10
+#define KT_SLOCK	12
+#define KT_DEAD2	13
+#define KT_BRL		14
+
+#define K(t,v)		(((t)<<8)|(v))
+#define KTYP(x)		((x) >> 8)
+#define KVAL(x)		((x) & 0xff)
+
+#define K_F1		K(KT_FN,0)
+#define K_F2		K(KT_FN,1)
+#define K_F3		K(KT_FN,2)
+#define K_F4		K(KT_FN,3)
+#define K_F5		K(KT_FN,4)
+#define K_F6		K(KT_FN,5)
+#define K_F7		K(KT_FN,6)
+#define K_F8		K(KT_FN,7)
+#define K_F9		K(KT_FN,8)
+#define K_F10		K(KT_FN,9)
+#define K_F11		K(KT_FN,10)
+#define K_F12		K(KT_FN,11)
+#define K_F13		K(KT_FN,12)
+#define K_F14		K(KT_FN,13)
+#define K_F15		K(KT_FN,14)
+#define K_F16		K(KT_FN,15)
+#define K_F17		K(KT_FN,16)
+#define K_F18		K(KT_FN,17)
+#define K_F19		K(KT_FN,18)
+#define K_F20		K(KT_FN,19)
+#define K_FIND		K(KT_FN,20)
+#define K_INSERT	K(KT_FN,21)
+#define K_REMOVE	K(KT_FN,22)
+#define K_SELECT	K(KT_FN,23)
+#define K_PGUP		K(KT_FN,24) /* PGUP is a synonym for PRIOR */
+#define K_PGDN		K(KT_FN,25) /* PGDN is a synonym for NEXT */
+#define K_MACRO	 	K(KT_FN,26)
+#define K_HELP		K(KT_FN,27)
+#define K_DO		K(KT_FN,28)
+#define K_PAUSE	 	K(KT_FN,29)
+#define K_F21		K(KT_FN,30)
+#define K_F22		K(KT_FN,31)
+#define K_F23		K(KT_FN,32)
+#define K_F24		K(KT_FN,33)
+#define K_F25		K(KT_FN,34)
+#define K_F26		K(KT_FN,35)
+#define K_F27		K(KT_FN,36)
+#define K_F28		K(KT_FN,37)
+#define K_F29		K(KT_FN,38)
+#define K_F30		K(KT_FN,39)
+#define K_F31		K(KT_FN,40)
+#define K_F32		K(KT_FN,41)
+#define K_F33		K(KT_FN,42)
+#define K_F34		K(KT_FN,43)
+#define K_F35		K(KT_FN,44)
+#define K_F36		K(KT_FN,45)
+#define K_F37		K(KT_FN,46)
+#define K_F38		K(KT_FN,47)
+#define K_F39		K(KT_FN,48)
+#define K_F40		K(KT_FN,49)
+#define K_F41		K(KT_FN,50)
+#define K_F42		K(KT_FN,51)
+#define K_F43		K(KT_FN,52)
+#define K_F44		K(KT_FN,53)
+#define K_F45		K(KT_FN,54)
+#define K_F46		K(KT_FN,55)
+#define K_F47		K(KT_FN,56)
+#define K_F48		K(KT_FN,57)
+#define K_F49		K(KT_FN,58)
+#define K_F50		K(KT_FN,59)
+#define K_F51		K(KT_FN,60)
+#define K_F52		K(KT_FN,61)
+#define K_F53		K(KT_FN,62)
+#define K_F54		K(KT_FN,63)
+#define K_F55		K(KT_FN,64)
+#define K_F56		K(KT_FN,65)
+#define K_F57		K(KT_FN,66)
+#define K_F58		K(KT_FN,67)
+#define K_F59		K(KT_FN,68)
+#define K_F60		K(KT_FN,69)
+#define K_F61		K(KT_FN,70)
+#define K_F62		K(KT_FN,71)
+#define K_F63		K(KT_FN,72)
+#define K_F64		K(KT_FN,73)
+#define K_F65		K(KT_FN,74)
+#define K_F66		K(KT_FN,75)
+#define K_F67		K(KT_FN,76)
+#define K_F68		K(KT_FN,77)
+#define K_F69		K(KT_FN,78)
+#define K_F70		K(KT_FN,79)
+#define K_F71		K(KT_FN,80)
+#define K_F72		K(KT_FN,81)
+#define K_F73		K(KT_FN,82)
+#define K_F74		K(KT_FN,83)
+#define K_F75		K(KT_FN,84)
+#define K_F76		K(KT_FN,85)
+#define K_F77		K(KT_FN,86)
+#define K_F78		K(KT_FN,87)
+#define K_F79		K(KT_FN,88)
+#define K_F80		K(KT_FN,89)
+#define K_F81		K(KT_FN,90)
+#define K_F82		K(KT_FN,91)
+#define K_F83		K(KT_FN,92)
+#define K_F84		K(KT_FN,93)
+#define K_F85		K(KT_FN,94)
+#define K_F86		K(KT_FN,95)
+#define K_F87		K(KT_FN,96)
+#define K_F88		K(KT_FN,97)
+#define K_F89		K(KT_FN,98)
+#define K_F90		K(KT_FN,99)
+#define K_F91		K(KT_FN,100)
+#define K_F92		K(KT_FN,101)
+#define K_F93		K(KT_FN,102)
+#define K_F94		K(KT_FN,103)
+#define K_F95		K(KT_FN,104)
+#define K_F96		K(KT_FN,105)
+#define K_F97		K(KT_FN,106)
+#define K_F98		K(KT_FN,107)
+#define K_F99		K(KT_FN,108)
+#define K_F100		K(KT_FN,109)
+#define K_F101		K(KT_FN,110)
+#define K_F102		K(KT_FN,111)
+#define K_F103		K(KT_FN,112)
+#define K_F104		K(KT_FN,113)
+#define K_F105		K(KT_FN,114)
+#define K_F106		K(KT_FN,115)
+#define K_F107		K(KT_FN,116)
+#define K_F108		K(KT_FN,117)
+#define K_F109		K(KT_FN,118)
+#define K_F110		K(KT_FN,119)
+#define K_F111		K(KT_FN,120)
+#define K_F112		K(KT_FN,121)
+#define K_F113		K(KT_FN,122)
+#define K_F114		K(KT_FN,123)
+#define K_F115		K(KT_FN,124)
+#define K_F116		K(KT_FN,125)
+#define K_F117		K(KT_FN,126)
+#define K_F118		K(KT_FN,127)
+#define K_F119		K(KT_FN,128)
+#define K_F120		K(KT_FN,129)
+#define K_F121		K(KT_FN,130)
+#define K_F122		K(KT_FN,131)
+#define K_F123		K(KT_FN,132)
+#define K_F124		K(KT_FN,133)
+#define K_F125		K(KT_FN,134)
+#define K_F126		K(KT_FN,135)
+#define K_F127		K(KT_FN,136)
+#define K_F128		K(KT_FN,137)
+#define K_F129		K(KT_FN,138)
+#define K_F130		K(KT_FN,139)
+#define K_F131		K(KT_FN,140)
+#define K_F132		K(KT_FN,141)
+#define K_F133		K(KT_FN,142)
+#define K_F134		K(KT_FN,143)
+#define K_F135		K(KT_FN,144)
+#define K_F136		K(KT_FN,145)
+#define K_F137		K(KT_FN,146)
+#define K_F138		K(KT_FN,147)
+#define K_F139		K(KT_FN,148)
+#define K_F140		K(KT_FN,149)
+#define K_F141		K(KT_FN,150)
+#define K_F142		K(KT_FN,151)
+#define K_F143		K(KT_FN,152)
+#define K_F144		K(KT_FN,153)
+#define K_F145		K(KT_FN,154)
+#define K_F146		K(KT_FN,155)
+#define K_F147		K(KT_FN,156)
+#define K_F148		K(KT_FN,157)
+#define K_F149		K(KT_FN,158)
+#define K_F150		K(KT_FN,159)
+#define K_F151		K(KT_FN,160)
+#define K_F152		K(KT_FN,161)
+#define K_F153		K(KT_FN,162)
+#define K_F154		K(KT_FN,163)
+#define K_F155		K(KT_FN,164)
+#define K_F156		K(KT_FN,165)
+#define K_F157		K(KT_FN,166)
+#define K_F158		K(KT_FN,167)
+#define K_F159		K(KT_FN,168)
+#define K_F160		K(KT_FN,169)
+#define K_F161		K(KT_FN,170)
+#define K_F162		K(KT_FN,171)
+#define K_F163		K(KT_FN,172)
+#define K_F164		K(KT_FN,173)
+#define K_F165		K(KT_FN,174)
+#define K_F166		K(KT_FN,175)
+#define K_F167		K(KT_FN,176)
+#define K_F168		K(KT_FN,177)
+#define K_F169		K(KT_FN,178)
+#define K_F170		K(KT_FN,179)
+#define K_F171		K(KT_FN,180)
+#define K_F172		K(KT_FN,181)
+#define K_F173		K(KT_FN,182)
+#define K_F174		K(KT_FN,183)
+#define K_F175		K(KT_FN,184)
+#define K_F176		K(KT_FN,185)
+#define K_F177		K(KT_FN,186)
+#define K_F178		K(KT_FN,187)
+#define K_F179		K(KT_FN,188)
+#define K_F180		K(KT_FN,189)
+#define K_F181		K(KT_FN,190)
+#define K_F182		K(KT_FN,191)
+#define K_F183		K(KT_FN,192)
+#define K_F184		K(KT_FN,193)
+#define K_F185		K(KT_FN,194)
+#define K_F186		K(KT_FN,195)
+#define K_F187		K(KT_FN,196)
+#define K_F188		K(KT_FN,197)
+#define K_F189		K(KT_FN,198)
+#define K_F190		K(KT_FN,199)
+#define K_F191		K(KT_FN,200)
+#define K_F192		K(KT_FN,201)
+#define K_F193		K(KT_FN,202)
+#define K_F194		K(KT_FN,203)
+#define K_F195		K(KT_FN,204)
+#define K_F196		K(KT_FN,205)
+#define K_F197		K(KT_FN,206)
+#define K_F198		K(KT_FN,207)
+#define K_F199		K(KT_FN,208)
+#define K_F200		K(KT_FN,209)
+#define K_F201		K(KT_FN,210)
+#define K_F202		K(KT_FN,211)
+#define K_F203		K(KT_FN,212)
+#define K_F204		K(KT_FN,213)
+#define K_F205		K(KT_FN,214)
+#define K_F206		K(KT_FN,215)
+#define K_F207		K(KT_FN,216)
+#define K_F208		K(KT_FN,217)
+#define K_F209		K(KT_FN,218)
+#define K_F210		K(KT_FN,219)
+#define K_F211		K(KT_FN,220)
+#define K_F212		K(KT_FN,221)
+#define K_F213		K(KT_FN,222)
+#define K_F214		K(KT_FN,223)
+#define K_F215		K(KT_FN,224)
+#define K_F216		K(KT_FN,225)
+#define K_F217		K(KT_FN,226)
+#define K_F218		K(KT_FN,227)
+#define K_F219		K(KT_FN,228)
+#define K_F220		K(KT_FN,229)
+#define K_F221		K(KT_FN,230)
+#define K_F222		K(KT_FN,231)
+#define K_F223		K(KT_FN,232)
+#define K_F224		K(KT_FN,233)
+#define K_F225		K(KT_FN,234)
+#define K_F226		K(KT_FN,235)
+#define K_F227		K(KT_FN,236)
+#define K_F228		K(KT_FN,237)
+#define K_F229		K(KT_FN,238)
+#define K_F230		K(KT_FN,239)
+#define K_F231		K(KT_FN,240)
+#define K_F232		K(KT_FN,241)
+#define K_F233		K(KT_FN,242)
+#define K_F234		K(KT_FN,243)
+#define K_F235		K(KT_FN,244)
+#define K_F236		K(KT_FN,245)
+#define K_F237		K(KT_FN,246)
+#define K_F238		K(KT_FN,247)
+#define K_F239		K(KT_FN,248)
+#define K_F240		K(KT_FN,249)
+#define K_F241		K(KT_FN,250)
+#define K_F242		K(KT_FN,251)
+#define K_F243		K(KT_FN,252)
+#define K_F244		K(KT_FN,253)
+#define K_F245		K(KT_FN,254)
+#define K_UNDO		K(KT_FN,255)
+
+
+#define K_HOLE		K(KT_SPEC,0)
+#define K_ENTER		K(KT_SPEC,1)
+#define K_SH_REGS	K(KT_SPEC,2)
+#define K_SH_MEM	K(KT_SPEC,3)
+#define K_SH_STAT	K(KT_SPEC,4)
+#define K_BREAK		K(KT_SPEC,5)
+#define K_CONS		K(KT_SPEC,6)
+#define K_CAPS		K(KT_SPEC,7)
+#define K_NUM		K(KT_SPEC,8)
+#define K_HOLD		K(KT_SPEC,9)
+#define K_SCROLLFORW	K(KT_SPEC,10)
+#define K_SCROLLBACK	K(KT_SPEC,11)
+#define K_BOOT		K(KT_SPEC,12)
+#define K_CAPSON	K(KT_SPEC,13)
+#define K_COMPOSE	K(KT_SPEC,14)
+#define K_SAK		K(KT_SPEC,15)
+#define K_DECRCONSOLE	K(KT_SPEC,16)
+#define K_INCRCONSOLE	K(KT_SPEC,17)
+#define K_SPAWNCONSOLE	K(KT_SPEC,18)
+#define K_BARENUMLOCK	K(KT_SPEC,19)
+
+#define K_ALLOCATED	K(KT_SPEC,126) /* dynamically allocated keymap */
+#define K_NOSUCHMAP	K(KT_SPEC,127) /* returned by KDGKBENT */
+
+#define K_P0		K(KT_PAD,0)
+#define K_P1		K(KT_PAD,1)
+#define K_P2		K(KT_PAD,2)
+#define K_P3		K(KT_PAD,3)
+#define K_P4		K(KT_PAD,4)
+#define K_P5		K(KT_PAD,5)
+#define K_P6		K(KT_PAD,6)
+#define K_P7		K(KT_PAD,7)
+#define K_P8		K(KT_PAD,8)
+#define K_P9		K(KT_PAD,9)
+#define K_PPLUS		K(KT_PAD,10)	/* key-pad plus */
+#define K_PMINUS	K(KT_PAD,11)	/* key-pad minus */
+#define K_PSTAR		K(KT_PAD,12)	/* key-pad asterisk (star) */
+#define K_PSLASH	K(KT_PAD,13)	/* key-pad slash */
+#define K_PENTER	K(KT_PAD,14)	/* key-pad enter */
+#define K_PCOMMA	K(KT_PAD,15)	/* key-pad comma: kludge... */
+#define K_PDOT		K(KT_PAD,16)	/* key-pad dot (period): kludge... */
+#define K_PPLUSMINUS	K(KT_PAD,17)	/* key-pad plus/minus */
+#define K_PPARENL	K(KT_PAD,18)	/* key-pad left parenthesis */
+#define K_PPARENR	K(KT_PAD,19)	/* key-pad right parenthesis */
+
+#define NR_PAD		20
+
+#define K_DGRAVE	K(KT_DEAD,0)
+#define K_DACUTE	K(KT_DEAD,1)
+#define K_DCIRCM	K(KT_DEAD,2)
+#define K_DTILDE	K(KT_DEAD,3)
+#define K_DDIERE	K(KT_DEAD,4)
+#define K_DCEDIL	K(KT_DEAD,5)
+
+#define NR_DEAD		6
+
+#define K_DOWN		K(KT_CUR,0)
+#define K_LEFT		K(KT_CUR,1)
+#define K_RIGHT		K(KT_CUR,2)
+#define K_UP		K(KT_CUR,3)
+
+#define K_SHIFT		K(KT_SHIFT,KG_SHIFT)
+#define K_CTRL		K(KT_SHIFT,KG_CTRL)
+#define K_ALT		K(KT_SHIFT,KG_ALT)
+#define K_ALTGR		K(KT_SHIFT,KG_ALTGR)
+#define K_SHIFTL	K(KT_SHIFT,KG_SHIFTL)
+#define K_SHIFTR	K(KT_SHIFT,KG_SHIFTR)
+#define K_CTRLL	 	K(KT_SHIFT,KG_CTRLL)
+#define K_CTRLR	 	K(KT_SHIFT,KG_CTRLR)
+#define K_CAPSSHIFT	K(KT_SHIFT,KG_CAPSSHIFT)
+
+#define K_ASC0		K(KT_ASCII,0)
+#define K_ASC1		K(KT_ASCII,1)
+#define K_ASC2		K(KT_ASCII,2)
+#define K_ASC3		K(KT_ASCII,3)
+#define K_ASC4		K(KT_ASCII,4)
+#define K_ASC5		K(KT_ASCII,5)
+#define K_ASC6		K(KT_ASCII,6)
+#define K_ASC7		K(KT_ASCII,7)
+#define K_ASC8		K(KT_ASCII,8)
+#define K_ASC9		K(KT_ASCII,9)
+#define K_HEX0		K(KT_ASCII,10)
+#define K_HEX1		K(KT_ASCII,11)
+#define K_HEX2		K(KT_ASCII,12)
+#define K_HEX3		K(KT_ASCII,13)
+#define K_HEX4		K(KT_ASCII,14)
+#define K_HEX5		K(KT_ASCII,15)
+#define K_HEX6		K(KT_ASCII,16)
+#define K_HEX7		K(KT_ASCII,17)
+#define K_HEX8		K(KT_ASCII,18)
+#define K_HEX9		K(KT_ASCII,19)
+#define K_HEXa		K(KT_ASCII,20)
+#define K_HEXb		K(KT_ASCII,21)
+#define K_HEXc		K(KT_ASCII,22)
+#define K_HEXd		K(KT_ASCII,23)
+#define K_HEXe		K(KT_ASCII,24)
+#define K_HEXf		K(KT_ASCII,25)
+
+#define NR_ASCII	26
+
+#define K_SHIFTLOCK	K(KT_LOCK,KG_SHIFT)
+#define K_CTRLLOCK	K(KT_LOCK,KG_CTRL)
+#define K_ALTLOCK	K(KT_LOCK,KG_ALT)
+#define K_ALTGRLOCK	K(KT_LOCK,KG_ALTGR)
+#define K_SHIFTLLOCK	K(KT_LOCK,KG_SHIFTL)
+#define K_SHIFTRLOCK	K(KT_LOCK,KG_SHIFTR)
+#define K_CTRLLLOCK	K(KT_LOCK,KG_CTRLL)
+#define K_CTRLRLOCK	K(KT_LOCK,KG_CTRLR)
+#define K_CAPSSHIFTLOCK	K(KT_LOCK,KG_CAPSSHIFT)
+
+#define K_SHIFT_SLOCK	K(KT_SLOCK,KG_SHIFT)
+#define K_CTRL_SLOCK	K(KT_SLOCK,KG_CTRL)
+#define K_ALT_SLOCK	K(KT_SLOCK,KG_ALT)
+#define K_ALTGR_SLOCK	K(KT_SLOCK,KG_ALTGR)
+#define K_SHIFTL_SLOCK	K(KT_SLOCK,KG_SHIFTL)
+#define K_SHIFTR_SLOCK	K(KT_SLOCK,KG_SHIFTR)
+#define K_CTRLL_SLOCK	K(KT_SLOCK,KG_CTRLL)
+#define K_CTRLR_SLOCK	K(KT_SLOCK,KG_CTRLR)
+#define K_CAPSSHIFT_SLOCK	K(KT_SLOCK,KG_CAPSSHIFT)
+
+#define NR_LOCK		9
+
+#define K_BRL_BLANK     K(KT_BRL, 0)
+#define K_BRL_DOT1      K(KT_BRL, 1)
+#define K_BRL_DOT2      K(KT_BRL, 2)
+#define K_BRL_DOT3      K(KT_BRL, 3)
+#define K_BRL_DOT4      K(KT_BRL, 4)
+#define K_BRL_DOT5      K(KT_BRL, 5)
+#define K_BRL_DOT6      K(KT_BRL, 6)
+#define K_BRL_DOT7      K(KT_BRL, 7)
+#define K_BRL_DOT8      K(KT_BRL, 8)
+#define K_BRL_DOT9      K(KT_BRL, 9)
+#define K_BRL_DOT10     K(KT_BRL, 10)
+
+#define NR_BRL		11
+
+#define MAX_DIACR	256
+#endif /* _UAPI__LINUX_KEYBOARD_H */
diff --git a/include/uapi/linux/keyctl.h b/include/uapi/linux/keyctl.h
new file mode 100644
index 00000000000..c9b7f4faf97
--- /dev/null
+++ b/include/uapi/linux/keyctl.h
@@ -0,0 +1,60 @@
+/* keyctl.h: keyctl command IDs
+ *
+ * Copyright (C) 2004, 2008 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_KEYCTL_H
+#define _LINUX_KEYCTL_H
+
+/* special process keyring shortcut IDs */
+#define KEY_SPEC_THREAD_KEYRING		-1	/* - key ID for thread-specific keyring */
+#define KEY_SPEC_PROCESS_KEYRING	-2	/* - key ID for process-specific keyring */
+#define KEY_SPEC_SESSION_KEYRING	-3	/* - key ID for session-specific keyring */
+#define KEY_SPEC_USER_KEYRING		-4	/* - key ID for UID-specific keyring */
+#define KEY_SPEC_USER_SESSION_KEYRING	-5	/* - key ID for UID-session keyring */
+#define KEY_SPEC_GROUP_KEYRING		-6	/* - key ID for GID-specific keyring */
+#define KEY_SPEC_REQKEY_AUTH_KEY	-7	/* - key ID for assumed request_key auth key */
+#define KEY_SPEC_REQUESTOR_KEYRING	-8	/* - key ID for request_key() dest keyring */
+
+/* request-key default keyrings */
+#define KEY_REQKEY_DEFL_NO_CHANGE		-1
+#define KEY_REQKEY_DEFL_DEFAULT			0
+#define KEY_REQKEY_DEFL_THREAD_KEYRING		1
+#define KEY_REQKEY_DEFL_PROCESS_KEYRING		2
+#define KEY_REQKEY_DEFL_SESSION_KEYRING		3
+#define KEY_REQKEY_DEFL_USER_KEYRING		4
+#define KEY_REQKEY_DEFL_USER_SESSION_KEYRING	5
+#define KEY_REQKEY_DEFL_GROUP_KEYRING		6
+#define KEY_REQKEY_DEFL_REQUESTOR_KEYRING	7
+
+/* keyctl commands */
+#define KEYCTL_GET_KEYRING_ID		0	/* ask for a keyring's ID */
+#define KEYCTL_JOIN_SESSION_KEYRING	1	/* join or start named session keyring */
+#define KEYCTL_UPDATE			2	/* update a key */
+#define KEYCTL_REVOKE			3	/* revoke a key */
+#define KEYCTL_CHOWN			4	/* set ownership of a key */
+#define KEYCTL_SETPERM			5	/* set perms on a key */
+#define KEYCTL_DESCRIBE			6	/* describe a key */
+#define KEYCTL_CLEAR			7	/* clear contents of a keyring */
+#define KEYCTL_LINK			8	/* link a key into a keyring */
+#define KEYCTL_UNLINK			9	/* unlink a key from a keyring */
+#define KEYCTL_SEARCH			10	/* search for a key in a keyring */
+#define KEYCTL_READ			11	/* read a key or keyring's contents */
+#define KEYCTL_INSTANTIATE		12	/* instantiate a partially constructed key */
+#define KEYCTL_NEGATE			13	/* negate a partially constructed key */
+#define KEYCTL_SET_REQKEY_KEYRING	14	/* set default request-key keyring */
+#define KEYCTL_SET_TIMEOUT		15	/* set key timeout */
+#define KEYCTL_ASSUME_AUTHORITY		16	/* assume request_key() authorisation */
+#define KEYCTL_GET_SECURITY		17	/* get key security label */
+#define KEYCTL_SESSION_TO_PARENT	18	/* apply session keyring to parent process */
+#define KEYCTL_REJECT			19	/* reject a partially constructed key */
+#define KEYCTL_INSTANTIATE_IOV		20	/* instantiate a partially constructed key */
+#define KEYCTL_INVALIDATE		21	/* invalidate a key */
+
+#endif /*  _LINUX_KEYCTL_H */
diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
new file mode 100644
index 00000000000..0a6d6ba44c8
--- /dev/null
+++ b/include/uapi/linux/kvm.h
@@ -0,0 +1,975 @@
+#ifndef __LINUX_KVM_H
+#define __LINUX_KVM_H
+
+/*
+ * Userspace interface for /dev/kvm - kernel based virtual machine
+ *
+ * Note: you must update KVM_API_VERSION if you change this interface.
+ */
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <linux/ioctl.h>
+#include <asm/kvm.h>
+
+#define KVM_API_VERSION 12
+
+/* *** Deprecated interfaces *** */
+
+#define KVM_TRC_SHIFT           16
+
+#define KVM_TRC_ENTRYEXIT       (1 << KVM_TRC_SHIFT)
+#define KVM_TRC_HANDLER         (1 << (KVM_TRC_SHIFT + 1))
+
+#define KVM_TRC_VMENTRY         (KVM_TRC_ENTRYEXIT + 0x01)
+#define KVM_TRC_VMEXIT          (KVM_TRC_ENTRYEXIT + 0x02)
+#define KVM_TRC_PAGE_FAULT      (KVM_TRC_HANDLER + 0x01)
+
+#define KVM_TRC_HEAD_SIZE       12
+#define KVM_TRC_CYCLE_SIZE      8
+#define KVM_TRC_EXTRA_MAX       7
+
+#define KVM_TRC_INJ_VIRQ         (KVM_TRC_HANDLER + 0x02)
+#define KVM_TRC_REDELIVER_EVT    (KVM_TRC_HANDLER + 0x03)
+#define KVM_TRC_PEND_INTR        (KVM_TRC_HANDLER + 0x04)
+#define KVM_TRC_IO_READ          (KVM_TRC_HANDLER + 0x05)
+#define KVM_TRC_IO_WRITE         (KVM_TRC_HANDLER + 0x06)
+#define KVM_TRC_CR_READ          (KVM_TRC_HANDLER + 0x07)
+#define KVM_TRC_CR_WRITE         (KVM_TRC_HANDLER + 0x08)
+#define KVM_TRC_DR_READ          (KVM_TRC_HANDLER + 0x09)
+#define KVM_TRC_DR_WRITE         (KVM_TRC_HANDLER + 0x0A)
+#define KVM_TRC_MSR_READ         (KVM_TRC_HANDLER + 0x0B)
+#define KVM_TRC_MSR_WRITE        (KVM_TRC_HANDLER + 0x0C)
+#define KVM_TRC_CPUID            (KVM_TRC_HANDLER + 0x0D)
+#define KVM_TRC_INTR             (KVM_TRC_HANDLER + 0x0E)
+#define KVM_TRC_NMI              (KVM_TRC_HANDLER + 0x0F)
+#define KVM_TRC_VMMCALL          (KVM_TRC_HANDLER + 0x10)
+#define KVM_TRC_HLT              (KVM_TRC_HANDLER + 0x11)
+#define KVM_TRC_CLTS             (KVM_TRC_HANDLER + 0x12)
+#define KVM_TRC_LMSW             (KVM_TRC_HANDLER + 0x13)
+#define KVM_TRC_APIC_ACCESS      (KVM_TRC_HANDLER + 0x14)
+#define KVM_TRC_TDP_FAULT        (KVM_TRC_HANDLER + 0x15)
+#define KVM_TRC_GTLB_WRITE       (KVM_TRC_HANDLER + 0x16)
+#define KVM_TRC_STLB_WRITE       (KVM_TRC_HANDLER + 0x17)
+#define KVM_TRC_STLB_INVAL       (KVM_TRC_HANDLER + 0x18)
+#define KVM_TRC_PPC_INSTR        (KVM_TRC_HANDLER + 0x19)
+
+struct kvm_user_trace_setup {
+	__u32 buf_size;
+	__u32 buf_nr;
+};
+
+#define __KVM_DEPRECATED_MAIN_W_0x06 \
+	_IOW(KVMIO, 0x06, struct kvm_user_trace_setup)
+#define __KVM_DEPRECATED_MAIN_0x07 _IO(KVMIO, 0x07)
+#define __KVM_DEPRECATED_MAIN_0x08 _IO(KVMIO, 0x08)
+
+#define __KVM_DEPRECATED_VM_R_0x70 _IOR(KVMIO, 0x70, struct kvm_assigned_irq)
+
+struct kvm_breakpoint {
+	__u32 enabled;
+	__u32 padding;
+	__u64 address;
+};
+
+struct kvm_debug_guest {
+	__u32 enabled;
+	__u32 pad;
+	struct kvm_breakpoint breakpoints[4];
+	__u32 singlestep;
+};
+
+#define __KVM_DEPRECATED_VCPU_W_0x87 _IOW(KVMIO, 0x87, struct kvm_debug_guest)
+
+/* *** End of deprecated interfaces *** */
+
+
+/* for KVM_CREATE_MEMORY_REGION */
+struct kvm_memory_region {
+	__u32 slot;
+	__u32 flags;
+	__u64 guest_phys_addr;
+	__u64 memory_size; /* bytes */
+};
+
+/* for KVM_SET_USER_MEMORY_REGION */
+struct kvm_userspace_memory_region {
+	__u32 slot;
+	__u32 flags;
+	__u64 guest_phys_addr;
+	__u64 memory_size; /* bytes */
+	__u64 userspace_addr; /* start of the userspace allocated memory */
+};
+
+/*
+ * The bit 0 ~ bit 15 of kvm_memory_region::flags are visible for userspace,
+ * other bits are reserved for kvm internal use which are defined in
+ * include/linux/kvm_host.h.
+ */
+#define KVM_MEM_LOG_DIRTY_PAGES	(1UL << 0)
+#define KVM_MEM_READONLY	(1UL << 1)
+
+/* for KVM_IRQ_LINE */
+struct kvm_irq_level {
+	/*
+	 * ACPI gsi notion of irq.
+	 * For IA-64 (APIC model) IOAPIC0: irq 0-23; IOAPIC1: irq 24-47..
+	 * For X86 (standard AT mode) PIC0/1: irq 0-15. IOAPIC0: 0-23..
+	 */
+	union {
+		__u32 irq;
+		__s32 status;
+	};
+	__u32 level;
+};
+
+
+struct kvm_irqchip {
+	__u32 chip_id;
+	__u32 pad;
+        union {
+		char dummy[512];  /* reserving space */
+#ifdef __KVM_HAVE_PIT
+		struct kvm_pic_state pic;
+#endif
+#ifdef __KVM_HAVE_IOAPIC
+		struct kvm_ioapic_state ioapic;
+#endif
+	} chip;
+};
+
+/* for KVM_CREATE_PIT2 */
+struct kvm_pit_config {
+	__u32 flags;
+	__u32 pad[15];
+};
+
+#define KVM_PIT_SPEAKER_DUMMY     1
+
+#define KVM_EXIT_UNKNOWN          0
+#define KVM_EXIT_EXCEPTION        1
+#define KVM_EXIT_IO               2
+#define KVM_EXIT_HYPERCALL        3
+#define KVM_EXIT_DEBUG            4
+#define KVM_EXIT_HLT              5
+#define KVM_EXIT_MMIO             6
+#define KVM_EXIT_IRQ_WINDOW_OPEN  7
+#define KVM_EXIT_SHUTDOWN         8
+#define KVM_EXIT_FAIL_ENTRY       9
+#define KVM_EXIT_INTR             10
+#define KVM_EXIT_SET_TPR          11
+#define KVM_EXIT_TPR_ACCESS       12
+#define KVM_EXIT_S390_SIEIC       13
+#define KVM_EXIT_S390_RESET       14
+#define KVM_EXIT_DCR              15
+#define KVM_EXIT_NMI              16
+#define KVM_EXIT_INTERNAL_ERROR   17
+#define KVM_EXIT_OSI              18
+#define KVM_EXIT_PAPR_HCALL	  19
+#define KVM_EXIT_S390_UCONTROL	  20
+
+/* For KVM_EXIT_INTERNAL_ERROR */
+#define KVM_INTERNAL_ERROR_EMULATION 1
+#define KVM_INTERNAL_ERROR_SIMUL_EX 2
+
+/* for KVM_RUN, returned by mmap(vcpu_fd, offset=0) */
+struct kvm_run {
+	/* in */
+	__u8 request_interrupt_window;
+	__u8 padding1[7];
+
+	/* out */
+	__u32 exit_reason;
+	__u8 ready_for_interrupt_injection;
+	__u8 if_flag;
+	__u8 padding2[2];
+
+	/* in (pre_kvm_run), out (post_kvm_run) */
+	__u64 cr8;
+	__u64 apic_base;
+
+#ifdef __KVM_S390
+	/* the processor status word for s390 */
+	__u64 psw_mask; /* psw upper half */
+	__u64 psw_addr; /* psw lower half */
+#endif
+	union {
+		/* KVM_EXIT_UNKNOWN */
+		struct {
+			__u64 hardware_exit_reason;
+		} hw;
+		/* KVM_EXIT_FAIL_ENTRY */
+		struct {
+			__u64 hardware_entry_failure_reason;
+		} fail_entry;
+		/* KVM_EXIT_EXCEPTION */
+		struct {
+			__u32 exception;
+			__u32 error_code;
+		} ex;
+		/* KVM_EXIT_IO */
+		struct {
+#define KVM_EXIT_IO_IN  0
+#define KVM_EXIT_IO_OUT 1
+			__u8 direction;
+			__u8 size; /* bytes */
+			__u16 port;
+			__u32 count;
+			__u64 data_offset; /* relative to kvm_run start */
+		} io;
+		struct {
+			struct kvm_debug_exit_arch arch;
+		} debug;
+		/* KVM_EXIT_MMIO */
+		struct {
+			__u64 phys_addr;
+			__u8  data[8];
+			__u32 len;
+			__u8  is_write;
+		} mmio;
+		/* KVM_EXIT_HYPERCALL */
+		struct {
+			__u64 nr;
+			__u64 args[6];
+			__u64 ret;
+			__u32 longmode;
+			__u32 pad;
+		} hypercall;
+		/* KVM_EXIT_TPR_ACCESS */
+		struct {
+			__u64 rip;
+			__u32 is_write;
+			__u32 pad;
+		} tpr_access;
+		/* KVM_EXIT_S390_SIEIC */
+		struct {
+			__u8 icptcode;
+			__u16 ipa;
+			__u32 ipb;
+		} s390_sieic;
+		/* KVM_EXIT_S390_RESET */
+#define KVM_S390_RESET_POR       1
+#define KVM_S390_RESET_CLEAR     2
+#define KVM_S390_RESET_SUBSYSTEM 4
+#define KVM_S390_RESET_CPU_INIT  8
+#define KVM_S390_RESET_IPL       16
+		__u64 s390_reset_flags;
+		/* KVM_EXIT_S390_UCONTROL */
+		struct {
+			__u64 trans_exc_code;
+			__u32 pgm_code;
+		} s390_ucontrol;
+		/* KVM_EXIT_DCR */
+		struct {
+			__u32 dcrn;
+			__u32 data;
+			__u8  is_write;
+		} dcr;
+		struct {
+			__u32 suberror;
+			/* Available with KVM_CAP_INTERNAL_ERROR_DATA: */
+			__u32 ndata;
+			__u64 data[16];
+		} internal;
+		/* KVM_EXIT_OSI */
+		struct {
+			__u64 gprs[32];
+		} osi;
+		struct {
+			__u64 nr;
+			__u64 ret;
+			__u64 args[9];
+		} papr_hcall;
+		/* Fix the size of the union. */
+		char padding[256];
+	};
+
+	/*
+	 * shared registers between kvm and userspace.
+	 * kvm_valid_regs specifies the register classes set by the host
+	 * kvm_dirty_regs specified the register classes dirtied by userspace
+	 * struct kvm_sync_regs is architecture specific, as well as the
+	 * bits for kvm_valid_regs and kvm_dirty_regs
+	 */
+	__u64 kvm_valid_regs;
+	__u64 kvm_dirty_regs;
+	union {
+		struct kvm_sync_regs regs;
+		char padding[1024];
+	} s;
+};
+
+/* for KVM_REGISTER_COALESCED_MMIO / KVM_UNREGISTER_COALESCED_MMIO */
+
+struct kvm_coalesced_mmio_zone {
+	__u64 addr;
+	__u32 size;
+	__u32 pad;
+};
+
+struct kvm_coalesced_mmio {
+	__u64 phys_addr;
+	__u32 len;
+	__u32 pad;
+	__u8  data[8];
+};
+
+struct kvm_coalesced_mmio_ring {
+	__u32 first, last;
+	struct kvm_coalesced_mmio coalesced_mmio[0];
+};
+
+#define KVM_COALESCED_MMIO_MAX \
+	((PAGE_SIZE - sizeof(struct kvm_coalesced_mmio_ring)) / \
+	 sizeof(struct kvm_coalesced_mmio))
+
+/* for KVM_TRANSLATE */
+struct kvm_translation {
+	/* in */
+	__u64 linear_address;
+
+	/* out */
+	__u64 physical_address;
+	__u8  valid;
+	__u8  writeable;
+	__u8  usermode;
+	__u8  pad[5];
+};
+
+/* for KVM_INTERRUPT */
+struct kvm_interrupt {
+	/* in */
+	__u32 irq;
+};
+
+/* for KVM_GET_DIRTY_LOG */
+struct kvm_dirty_log {
+	__u32 slot;
+	__u32 padding1;
+	union {
+		void __user *dirty_bitmap; /* one bit per page */
+		__u64 padding2;
+	};
+};
+
+/* for KVM_SET_SIGNAL_MASK */
+struct kvm_signal_mask {
+	__u32 len;
+	__u8  sigset[0];
+};
+
+/* for KVM_TPR_ACCESS_REPORTING */
+struct kvm_tpr_access_ctl {
+	__u32 enabled;
+	__u32 flags;
+	__u32 reserved[8];
+};
+
+/* for KVM_SET_VAPIC_ADDR */
+struct kvm_vapic_addr {
+	__u64 vapic_addr;
+};
+
+/* for KVM_SET_MPSTATE */
+
+#define KVM_MP_STATE_RUNNABLE          0
+#define KVM_MP_STATE_UNINITIALIZED     1
+#define KVM_MP_STATE_INIT_RECEIVED     2
+#define KVM_MP_STATE_HALTED            3
+#define KVM_MP_STATE_SIPI_RECEIVED     4
+
+struct kvm_mp_state {
+	__u32 mp_state;
+};
+
+struct kvm_s390_psw {
+	__u64 mask;
+	__u64 addr;
+};
+
+/* valid values for type in kvm_s390_interrupt */
+#define KVM_S390_SIGP_STOP		0xfffe0000u
+#define KVM_S390_PROGRAM_INT		0xfffe0001u
+#define KVM_S390_SIGP_SET_PREFIX	0xfffe0002u
+#define KVM_S390_RESTART		0xfffe0003u
+#define KVM_S390_INT_VIRTIO		0xffff2603u
+#define KVM_S390_INT_SERVICE		0xffff2401u
+#define KVM_S390_INT_EMERGENCY		0xffff1201u
+#define KVM_S390_INT_EXTERNAL_CALL	0xffff1202u
+
+struct kvm_s390_interrupt {
+	__u32 type;
+	__u32 parm;
+	__u64 parm64;
+};
+
+/* for KVM_SET_GUEST_DEBUG */
+
+#define KVM_GUESTDBG_ENABLE		0x00000001
+#define KVM_GUESTDBG_SINGLESTEP		0x00000002
+
+struct kvm_guest_debug {
+	__u32 control;
+	__u32 pad;
+	struct kvm_guest_debug_arch arch;
+};
+
+enum {
+	kvm_ioeventfd_flag_nr_datamatch,
+	kvm_ioeventfd_flag_nr_pio,
+	kvm_ioeventfd_flag_nr_deassign,
+	kvm_ioeventfd_flag_nr_max,
+};
+
+#define KVM_IOEVENTFD_FLAG_DATAMATCH (1 << kvm_ioeventfd_flag_nr_datamatch)
+#define KVM_IOEVENTFD_FLAG_PIO       (1 << kvm_ioeventfd_flag_nr_pio)
+#define KVM_IOEVENTFD_FLAG_DEASSIGN  (1 << kvm_ioeventfd_flag_nr_deassign)
+
+#define KVM_IOEVENTFD_VALID_FLAG_MASK  ((1 << kvm_ioeventfd_flag_nr_max) - 1)
+
+struct kvm_ioeventfd {
+	__u64 datamatch;
+	__u64 addr;        /* legal pio/mmio address */
+	__u32 len;         /* 1, 2, 4, or 8 bytes    */
+	__s32 fd;
+	__u32 flags;
+	__u8  pad[36];
+};
+
+/* for KVM_ENABLE_CAP */
+struct kvm_enable_cap {
+	/* in */
+	__u32 cap;
+	__u32 flags;
+	__u64 args[4];
+	__u8  pad[64];
+};
+
+/* for KVM_PPC_GET_PVINFO */
+struct kvm_ppc_pvinfo {
+	/* out */
+	__u32 flags;
+	__u32 hcall[4];
+	__u8  pad[108];
+};
+
+/* for KVM_PPC_GET_SMMU_INFO */
+#define KVM_PPC_PAGE_SIZES_MAX_SZ	8
+
+struct kvm_ppc_one_page_size {
+	__u32 page_shift;	/* Page shift (or 0) */
+	__u32 pte_enc;		/* Encoding in the HPTE (>>12) */
+};
+
+struct kvm_ppc_one_seg_page_size {
+	__u32 page_shift;	/* Base page shift of segment (or 0) */
+	__u32 slb_enc;		/* SLB encoding for BookS */
+	struct kvm_ppc_one_page_size enc[KVM_PPC_PAGE_SIZES_MAX_SZ];
+};
+
+#define KVM_PPC_PAGE_SIZES_REAL		0x00000001
+#define KVM_PPC_1T_SEGMENTS		0x00000002
+
+struct kvm_ppc_smmu_info {
+	__u64 flags;
+	__u32 slb_size;
+	__u32 pad;
+	struct kvm_ppc_one_seg_page_size sps[KVM_PPC_PAGE_SIZES_MAX_SZ];
+};
+
+#define KVMIO 0xAE
+
+/* machine type bits, to be used as argument to KVM_CREATE_VM */
+#define KVM_VM_S390_UCONTROL	1
+
+#define KVM_S390_SIE_PAGE_OFFSET 1
+
+/*
+ * ioctls for /dev/kvm fds:
+ */
+#define KVM_GET_API_VERSION       _IO(KVMIO,   0x00)
+#define KVM_CREATE_VM             _IO(KVMIO,   0x01) /* returns a VM fd */
+#define KVM_GET_MSR_INDEX_LIST    _IOWR(KVMIO, 0x02, struct kvm_msr_list)
+
+#define KVM_S390_ENABLE_SIE       _IO(KVMIO,   0x06)
+/*
+ * Check if a kvm extension is available.  Argument is extension number,
+ * return is 1 (yes) or 0 (no, sorry).
+ */
+#define KVM_CHECK_EXTENSION       _IO(KVMIO,   0x03)
+/*
+ * Get size for mmap(vcpu_fd)
+ */
+#define KVM_GET_VCPU_MMAP_SIZE    _IO(KVMIO,   0x04) /* in bytes */
+#define KVM_GET_SUPPORTED_CPUID   _IOWR(KVMIO, 0x05, struct kvm_cpuid2)
+#define KVM_TRACE_ENABLE          __KVM_DEPRECATED_MAIN_W_0x06
+#define KVM_TRACE_PAUSE           __KVM_DEPRECATED_MAIN_0x07
+#define KVM_TRACE_DISABLE         __KVM_DEPRECATED_MAIN_0x08
+
+/*
+ * Extension capability list.
+ */
+#define KVM_CAP_IRQCHIP	  0
+#define KVM_CAP_HLT	  1
+#define KVM_CAP_MMU_SHADOW_CACHE_CONTROL 2
+#define KVM_CAP_USER_MEMORY 3
+#define KVM_CAP_SET_TSS_ADDR 4
+#define KVM_CAP_VAPIC 6
+#define KVM_CAP_EXT_CPUID 7
+#define KVM_CAP_CLOCKSOURCE 8
+#define KVM_CAP_NR_VCPUS 9       /* returns recommended max vcpus per vm */
+#define KVM_CAP_NR_MEMSLOTS 10   /* returns max memory slots per vm */
+#define KVM_CAP_PIT 11
+#define KVM_CAP_NOP_IO_DELAY 12
+#define KVM_CAP_PV_MMU 13
+#define KVM_CAP_MP_STATE 14
+#define KVM_CAP_COALESCED_MMIO 15
+#define KVM_CAP_SYNC_MMU 16  /* Changes to host mmap are reflected in guest */
+#ifdef __KVM_HAVE_DEVICE_ASSIGNMENT
+#define KVM_CAP_DEVICE_ASSIGNMENT 17
+#endif
+#define KVM_CAP_IOMMU 18
+#ifdef __KVM_HAVE_MSI
+#define KVM_CAP_DEVICE_MSI 20
+#endif
+/* Bug in KVM_SET_USER_MEMORY_REGION fixed: */
+#define KVM_CAP_DESTROY_MEMORY_REGION_WORKS 21
+#ifdef __KVM_HAVE_USER_NMI
+#define KVM_CAP_USER_NMI 22
+#endif
+#ifdef __KVM_HAVE_GUEST_DEBUG
+#define KVM_CAP_SET_GUEST_DEBUG 23
+#endif
+#ifdef __KVM_HAVE_PIT
+#define KVM_CAP_REINJECT_CONTROL 24
+#endif
+#ifdef __KVM_HAVE_IOAPIC
+#define KVM_CAP_IRQ_ROUTING 25
+#endif
+#define KVM_CAP_IRQ_INJECT_STATUS 26
+#ifdef __KVM_HAVE_DEVICE_ASSIGNMENT
+#define KVM_CAP_DEVICE_DEASSIGNMENT 27
+#endif
+#ifdef __KVM_HAVE_MSIX
+#define KVM_CAP_DEVICE_MSIX 28
+#endif
+#define KVM_CAP_ASSIGN_DEV_IRQ 29
+/* Another bug in KVM_SET_USER_MEMORY_REGION fixed: */
+#define KVM_CAP_JOIN_MEMORY_REGIONS_WORKS 30
+#ifdef __KVM_HAVE_MCE
+#define KVM_CAP_MCE 31
+#endif
+#define KVM_CAP_IRQFD 32
+#ifdef __KVM_HAVE_PIT
+#define KVM_CAP_PIT2 33
+#endif
+#define KVM_CAP_SET_BOOT_CPU_ID 34
+#ifdef __KVM_HAVE_PIT_STATE2
+#define KVM_CAP_PIT_STATE2 35
+#endif
+#define KVM_CAP_IOEVENTFD 36
+#define KVM_CAP_SET_IDENTITY_MAP_ADDR 37
+#ifdef __KVM_HAVE_XEN_HVM
+#define KVM_CAP_XEN_HVM 38
+#endif
+#define KVM_CAP_ADJUST_CLOCK 39
+#define KVM_CAP_INTERNAL_ERROR_DATA 40
+#ifdef __KVM_HAVE_VCPU_EVENTS
+#define KVM_CAP_VCPU_EVENTS 41
+#endif
+#define KVM_CAP_S390_PSW 42
+#define KVM_CAP_PPC_SEGSTATE 43
+#define KVM_CAP_HYPERV 44
+#define KVM_CAP_HYPERV_VAPIC 45
+#define KVM_CAP_HYPERV_SPIN 46
+#define KVM_CAP_PCI_SEGMENT 47
+#define KVM_CAP_PPC_PAIRED_SINGLES 48
+#define KVM_CAP_INTR_SHADOW 49
+#ifdef __KVM_HAVE_DEBUGREGS
+#define KVM_CAP_DEBUGREGS 50
+#endif
+#define KVM_CAP_X86_ROBUST_SINGLESTEP 51
+#define KVM_CAP_PPC_OSI 52
+#define KVM_CAP_PPC_UNSET_IRQ 53
+#define KVM_CAP_ENABLE_CAP 54
+#ifdef __KVM_HAVE_XSAVE
+#define KVM_CAP_XSAVE 55
+#endif
+#ifdef __KVM_HAVE_XCRS
+#define KVM_CAP_XCRS 56
+#endif
+#define KVM_CAP_PPC_GET_PVINFO 57
+#define KVM_CAP_PPC_IRQ_LEVEL 58
+#define KVM_CAP_ASYNC_PF 59
+#define KVM_CAP_TSC_CONTROL 60
+#define KVM_CAP_GET_TSC_KHZ 61
+#define KVM_CAP_PPC_BOOKE_SREGS 62
+#define KVM_CAP_SPAPR_TCE 63
+#define KVM_CAP_PPC_SMT 64
+#define KVM_CAP_PPC_RMA	65
+#define KVM_CAP_MAX_VCPUS 66       /* returns max vcpus per vm */
+#define KVM_CAP_PPC_HIOR 67
+#define KVM_CAP_PPC_PAPR 68
+#define KVM_CAP_SW_TLB 69
+#define KVM_CAP_ONE_REG 70
+#define KVM_CAP_S390_GMAP 71
+#define KVM_CAP_TSC_DEADLINE_TIMER 72
+#define KVM_CAP_S390_UCONTROL 73
+#define KVM_CAP_SYNC_REGS 74
+#define KVM_CAP_PCI_2_3 75
+#define KVM_CAP_KVMCLOCK_CTRL 76
+#define KVM_CAP_SIGNAL_MSI 77
+#define KVM_CAP_PPC_GET_SMMU_INFO 78
+#define KVM_CAP_S390_COW 79
+#define KVM_CAP_PPC_ALLOC_HTAB 80
+#ifdef __KVM_HAVE_READONLY_MEM
+#define KVM_CAP_READONLY_MEM 81
+#endif
+#define KVM_CAP_IRQFD_RESAMPLE 82
+
+#ifdef KVM_CAP_IRQ_ROUTING
+
+struct kvm_irq_routing_irqchip {
+	__u32 irqchip;
+	__u32 pin;
+};
+
+struct kvm_irq_routing_msi {
+	__u32 address_lo;
+	__u32 address_hi;
+	__u32 data;
+	__u32 pad;
+};
+
+/* gsi routing entry types */
+#define KVM_IRQ_ROUTING_IRQCHIP 1
+#define KVM_IRQ_ROUTING_MSI 2
+
+struct kvm_irq_routing_entry {
+	__u32 gsi;
+	__u32 type;
+	__u32 flags;
+	__u32 pad;
+	union {
+		struct kvm_irq_routing_irqchip irqchip;
+		struct kvm_irq_routing_msi msi;
+		__u32 pad[8];
+	} u;
+};
+
+struct kvm_irq_routing {
+	__u32 nr;
+	__u32 flags;
+	struct kvm_irq_routing_entry entries[0];
+};
+
+#endif
+
+#ifdef KVM_CAP_MCE
+/* x86 MCE */
+struct kvm_x86_mce {
+	__u64 status;
+	__u64 addr;
+	__u64 misc;
+	__u64 mcg_status;
+	__u8 bank;
+	__u8 pad1[7];
+	__u64 pad2[3];
+};
+#endif
+
+#ifdef KVM_CAP_XEN_HVM
+struct kvm_xen_hvm_config {
+	__u32 flags;
+	__u32 msr;
+	__u64 blob_addr_32;
+	__u64 blob_addr_64;
+	__u8 blob_size_32;
+	__u8 blob_size_64;
+	__u8 pad2[30];
+};
+#endif
+
+#define KVM_IRQFD_FLAG_DEASSIGN (1 << 0)
+/*
+ * Available with KVM_CAP_IRQFD_RESAMPLE
+ *
+ * KVM_IRQFD_FLAG_RESAMPLE indicates resamplefd is valid and specifies
+ * the irqfd to operate in resampling mode for level triggered interrupt
+ * emlation.  See Documentation/virtual/kvm/api.txt.
+ */
+#define KVM_IRQFD_FLAG_RESAMPLE (1 << 1)
+
+struct kvm_irqfd {
+	__u32 fd;
+	__u32 gsi;
+	__u32 flags;
+	__u32 resamplefd;
+	__u8  pad[16];
+};
+
+struct kvm_clock_data {
+	__u64 clock;
+	__u32 flags;
+	__u32 pad[9];
+};
+
+#define KVM_MMU_FSL_BOOKE_NOHV		0
+#define KVM_MMU_FSL_BOOKE_HV		1
+
+struct kvm_config_tlb {
+	__u64 params;
+	__u64 array;
+	__u32 mmu_type;
+	__u32 array_len;
+};
+
+struct kvm_dirty_tlb {
+	__u64 bitmap;
+	__u32 num_dirty;
+};
+
+/* Available with KVM_CAP_ONE_REG */
+
+#define KVM_REG_ARCH_MASK	0xff00000000000000ULL
+#define KVM_REG_GENERIC		0x0000000000000000ULL
+
+/*
+ * Architecture specific registers are to be defined in arch headers and
+ * ORed with the arch identifier.
+ */
+#define KVM_REG_PPC		0x1000000000000000ULL
+#define KVM_REG_X86		0x2000000000000000ULL
+#define KVM_REG_IA64		0x3000000000000000ULL
+#define KVM_REG_ARM		0x4000000000000000ULL
+#define KVM_REG_S390		0x5000000000000000ULL
+
+#define KVM_REG_SIZE_SHIFT	52
+#define KVM_REG_SIZE_MASK	0x00f0000000000000ULL
+#define KVM_REG_SIZE_U8		0x0000000000000000ULL
+#define KVM_REG_SIZE_U16	0x0010000000000000ULL
+#define KVM_REG_SIZE_U32	0x0020000000000000ULL
+#define KVM_REG_SIZE_U64	0x0030000000000000ULL
+#define KVM_REG_SIZE_U128	0x0040000000000000ULL
+#define KVM_REG_SIZE_U256	0x0050000000000000ULL
+#define KVM_REG_SIZE_U512	0x0060000000000000ULL
+#define KVM_REG_SIZE_U1024	0x0070000000000000ULL
+
+struct kvm_one_reg {
+	__u64 id;
+	__u64 addr;
+};
+
+struct kvm_msi {
+	__u32 address_lo;
+	__u32 address_hi;
+	__u32 data;
+	__u32 flags;
+	__u8  pad[16];
+};
+
+/*
+ * ioctls for VM fds
+ */
+#define KVM_SET_MEMORY_REGION     _IOW(KVMIO,  0x40, struct kvm_memory_region)
+/*
+ * KVM_CREATE_VCPU receives as a parameter the vcpu slot, and returns
+ * a vcpu fd.
+ */
+#define KVM_CREATE_VCPU           _IO(KVMIO,   0x41)
+#define KVM_GET_DIRTY_LOG         _IOW(KVMIO,  0x42, struct kvm_dirty_log)
+/* KVM_SET_MEMORY_ALIAS is obsolete: */
+#define KVM_SET_MEMORY_ALIAS      _IOW(KVMIO,  0x43, struct kvm_memory_alias)
+#define KVM_SET_NR_MMU_PAGES      _IO(KVMIO,   0x44)
+#define KVM_GET_NR_MMU_PAGES      _IO(KVMIO,   0x45)
+#define KVM_SET_USER_MEMORY_REGION _IOW(KVMIO, 0x46, \
+					struct kvm_userspace_memory_region)
+#define KVM_SET_TSS_ADDR          _IO(KVMIO,   0x47)
+#define KVM_SET_IDENTITY_MAP_ADDR _IOW(KVMIO,  0x48, __u64)
+
+/* enable ucontrol for s390 */
+struct kvm_s390_ucas_mapping {
+	__u64 user_addr;
+	__u64 vcpu_addr;
+	__u64 length;
+};
+#define KVM_S390_UCAS_MAP        _IOW(KVMIO, 0x50, struct kvm_s390_ucas_mapping)
+#define KVM_S390_UCAS_UNMAP      _IOW(KVMIO, 0x51, struct kvm_s390_ucas_mapping)
+#define KVM_S390_VCPU_FAULT	 _IOW(KVMIO, 0x52, unsigned long)
+
+/* Device model IOC */
+#define KVM_CREATE_IRQCHIP        _IO(KVMIO,   0x60)
+#define KVM_IRQ_LINE              _IOW(KVMIO,  0x61, struct kvm_irq_level)
+#define KVM_GET_IRQCHIP           _IOWR(KVMIO, 0x62, struct kvm_irqchip)
+#define KVM_SET_IRQCHIP           _IOR(KVMIO,  0x63, struct kvm_irqchip)
+#define KVM_CREATE_PIT            _IO(KVMIO,   0x64)
+#define KVM_GET_PIT               _IOWR(KVMIO, 0x65, struct kvm_pit_state)
+#define KVM_SET_PIT               _IOR(KVMIO,  0x66, struct kvm_pit_state)
+#define KVM_IRQ_LINE_STATUS       _IOWR(KVMIO, 0x67, struct kvm_irq_level)
+#define KVM_REGISTER_COALESCED_MMIO \
+			_IOW(KVMIO,  0x67, struct kvm_coalesced_mmio_zone)
+#define KVM_UNREGISTER_COALESCED_MMIO \
+			_IOW(KVMIO,  0x68, struct kvm_coalesced_mmio_zone)
+#define KVM_ASSIGN_PCI_DEVICE     _IOR(KVMIO,  0x69, \
+				       struct kvm_assigned_pci_dev)
+#define KVM_SET_GSI_ROUTING       _IOW(KVMIO,  0x6a, struct kvm_irq_routing)
+/* deprecated, replaced by KVM_ASSIGN_DEV_IRQ */
+#define KVM_ASSIGN_IRQ            __KVM_DEPRECATED_VM_R_0x70
+#define KVM_ASSIGN_DEV_IRQ        _IOW(KVMIO,  0x70, struct kvm_assigned_irq)
+#define KVM_REINJECT_CONTROL      _IO(KVMIO,   0x71)
+#define KVM_DEASSIGN_PCI_DEVICE   _IOW(KVMIO,  0x72, \
+				       struct kvm_assigned_pci_dev)
+#define KVM_ASSIGN_SET_MSIX_NR    _IOW(KVMIO,  0x73, \
+				       struct kvm_assigned_msix_nr)
+#define KVM_ASSIGN_SET_MSIX_ENTRY _IOW(KVMIO,  0x74, \
+				       struct kvm_assigned_msix_entry)
+#define KVM_DEASSIGN_DEV_IRQ      _IOW(KVMIO,  0x75, struct kvm_assigned_irq)
+#define KVM_IRQFD                 _IOW(KVMIO,  0x76, struct kvm_irqfd)
+#define KVM_CREATE_PIT2		  _IOW(KVMIO,  0x77, struct kvm_pit_config)
+#define KVM_SET_BOOT_CPU_ID       _IO(KVMIO,   0x78)
+#define KVM_IOEVENTFD             _IOW(KVMIO,  0x79, struct kvm_ioeventfd)
+#define KVM_XEN_HVM_CONFIG        _IOW(KVMIO,  0x7a, struct kvm_xen_hvm_config)
+#define KVM_SET_CLOCK             _IOW(KVMIO,  0x7b, struct kvm_clock_data)
+#define KVM_GET_CLOCK             _IOR(KVMIO,  0x7c, struct kvm_clock_data)
+/* Available with KVM_CAP_PIT_STATE2 */
+#define KVM_GET_PIT2              _IOR(KVMIO,  0x9f, struct kvm_pit_state2)
+#define KVM_SET_PIT2              _IOW(KVMIO,  0xa0, struct kvm_pit_state2)
+/* Available with KVM_CAP_PPC_GET_PVINFO */
+#define KVM_PPC_GET_PVINFO	  _IOW(KVMIO,  0xa1, struct kvm_ppc_pvinfo)
+/* Available with KVM_CAP_TSC_CONTROL */
+#define KVM_SET_TSC_KHZ           _IO(KVMIO,  0xa2)
+#define KVM_GET_TSC_KHZ           _IO(KVMIO,  0xa3)
+/* Available with KVM_CAP_PCI_2_3 */
+#define KVM_ASSIGN_SET_INTX_MASK  _IOW(KVMIO,  0xa4, \
+				       struct kvm_assigned_pci_dev)
+/* Available with KVM_CAP_SIGNAL_MSI */
+#define KVM_SIGNAL_MSI            _IOW(KVMIO,  0xa5, struct kvm_msi)
+/* Available with KVM_CAP_PPC_GET_SMMU_INFO */
+#define KVM_PPC_GET_SMMU_INFO	  _IOR(KVMIO,  0xa6, struct kvm_ppc_smmu_info)
+/* Available with KVM_CAP_PPC_ALLOC_HTAB */
+#define KVM_PPC_ALLOCATE_HTAB	  _IOWR(KVMIO, 0xa7, __u32)
+
+/*
+ * ioctls for vcpu fds
+ */
+#define KVM_RUN                   _IO(KVMIO,   0x80)
+#define KVM_GET_REGS              _IOR(KVMIO,  0x81, struct kvm_regs)
+#define KVM_SET_REGS              _IOW(KVMIO,  0x82, struct kvm_regs)
+#define KVM_GET_SREGS             _IOR(KVMIO,  0x83, struct kvm_sregs)
+#define KVM_SET_SREGS             _IOW(KVMIO,  0x84, struct kvm_sregs)
+#define KVM_TRANSLATE             _IOWR(KVMIO, 0x85, struct kvm_translation)
+#define KVM_INTERRUPT             _IOW(KVMIO,  0x86, struct kvm_interrupt)
+/* KVM_DEBUG_GUEST is no longer supported, use KVM_SET_GUEST_DEBUG instead */
+#define KVM_DEBUG_GUEST           __KVM_DEPRECATED_VCPU_W_0x87
+#define KVM_GET_MSRS              _IOWR(KVMIO, 0x88, struct kvm_msrs)
+#define KVM_SET_MSRS              _IOW(KVMIO,  0x89, struct kvm_msrs)
+#define KVM_SET_CPUID             _IOW(KVMIO,  0x8a, struct kvm_cpuid)
+#define KVM_SET_SIGNAL_MASK       _IOW(KVMIO,  0x8b, struct kvm_signal_mask)
+#define KVM_GET_FPU               _IOR(KVMIO,  0x8c, struct kvm_fpu)
+#define KVM_SET_FPU               _IOW(KVMIO,  0x8d, struct kvm_fpu)
+#define KVM_GET_LAPIC             _IOR(KVMIO,  0x8e, struct kvm_lapic_state)
+#define KVM_SET_LAPIC             _IOW(KVMIO,  0x8f, struct kvm_lapic_state)
+#define KVM_SET_CPUID2            _IOW(KVMIO,  0x90, struct kvm_cpuid2)
+#define KVM_GET_CPUID2            _IOWR(KVMIO, 0x91, struct kvm_cpuid2)
+/* Available with KVM_CAP_VAPIC */
+#define KVM_TPR_ACCESS_REPORTING  _IOWR(KVMIO, 0x92, struct kvm_tpr_access_ctl)
+/* Available with KVM_CAP_VAPIC */
+#define KVM_SET_VAPIC_ADDR        _IOW(KVMIO,  0x93, struct kvm_vapic_addr)
+/* valid for virtual machine (for floating interrupt)_and_ vcpu */
+#define KVM_S390_INTERRUPT        _IOW(KVMIO,  0x94, struct kvm_s390_interrupt)
+/* store status for s390 */
+#define KVM_S390_STORE_STATUS_NOADDR    (-1ul)
+#define KVM_S390_STORE_STATUS_PREFIXED  (-2ul)
+#define KVM_S390_STORE_STATUS	  _IOW(KVMIO,  0x95, unsigned long)
+/* initial ipl psw for s390 */
+#define KVM_S390_SET_INITIAL_PSW  _IOW(KVMIO,  0x96, struct kvm_s390_psw)
+/* initial reset for s390 */
+#define KVM_S390_INITIAL_RESET    _IO(KVMIO,   0x97)
+#define KVM_GET_MP_STATE          _IOR(KVMIO,  0x98, struct kvm_mp_state)
+#define KVM_SET_MP_STATE          _IOW(KVMIO,  0x99, struct kvm_mp_state)
+/* Available with KVM_CAP_NMI */
+#define KVM_NMI                   _IO(KVMIO,   0x9a)
+/* Available with KVM_CAP_SET_GUEST_DEBUG */
+#define KVM_SET_GUEST_DEBUG       _IOW(KVMIO,  0x9b, struct kvm_guest_debug)
+/* MCE for x86 */
+#define KVM_X86_SETUP_MCE         _IOW(KVMIO,  0x9c, __u64)
+#define KVM_X86_GET_MCE_CAP_SUPPORTED _IOR(KVMIO,  0x9d, __u64)
+#define KVM_X86_SET_MCE           _IOW(KVMIO,  0x9e, struct kvm_x86_mce)
+/* IA64 stack access */
+#define KVM_IA64_VCPU_GET_STACK   _IOR(KVMIO,  0x9a, void *)
+#define KVM_IA64_VCPU_SET_STACK   _IOW(KVMIO,  0x9b, void *)
+/* Available with KVM_CAP_VCPU_EVENTS */
+#define KVM_GET_VCPU_EVENTS       _IOR(KVMIO,  0x9f, struct kvm_vcpu_events)
+#define KVM_SET_VCPU_EVENTS       _IOW(KVMIO,  0xa0, struct kvm_vcpu_events)
+/* Available with KVM_CAP_DEBUGREGS */
+#define KVM_GET_DEBUGREGS         _IOR(KVMIO,  0xa1, struct kvm_debugregs)
+#define KVM_SET_DEBUGREGS         _IOW(KVMIO,  0xa2, struct kvm_debugregs)
+#define KVM_ENABLE_CAP            _IOW(KVMIO,  0xa3, struct kvm_enable_cap)
+/* Available with KVM_CAP_XSAVE */
+#define KVM_GET_XSAVE		  _IOR(KVMIO,  0xa4, struct kvm_xsave)
+#define KVM_SET_XSAVE		  _IOW(KVMIO,  0xa5, struct kvm_xsave)
+/* Available with KVM_CAP_XCRS */
+#define KVM_GET_XCRS		  _IOR(KVMIO,  0xa6, struct kvm_xcrs)
+#define KVM_SET_XCRS		  _IOW(KVMIO,  0xa7, struct kvm_xcrs)
+#define KVM_CREATE_SPAPR_TCE	  _IOW(KVMIO,  0xa8, struct kvm_create_spapr_tce)
+/* Available with KVM_CAP_RMA */
+#define KVM_ALLOCATE_RMA	  _IOR(KVMIO,  0xa9, struct kvm_allocate_rma)
+/* Available with KVM_CAP_SW_TLB */
+#define KVM_DIRTY_TLB		  _IOW(KVMIO,  0xaa, struct kvm_dirty_tlb)
+/* Available with KVM_CAP_ONE_REG */
+#define KVM_GET_ONE_REG		  _IOW(KVMIO,  0xab, struct kvm_one_reg)
+#define KVM_SET_ONE_REG		  _IOW(KVMIO,  0xac, struct kvm_one_reg)
+/* VM is being stopped by host */
+#define KVM_KVMCLOCK_CTRL	  _IO(KVMIO,   0xad)
+
+#define KVM_DEV_ASSIGN_ENABLE_IOMMU	(1 << 0)
+#define KVM_DEV_ASSIGN_PCI_2_3		(1 << 1)
+#define KVM_DEV_ASSIGN_MASK_INTX	(1 << 2)
+
+struct kvm_assigned_pci_dev {
+	__u32 assigned_dev_id;
+	__u32 busnr;
+	__u32 devfn;
+	__u32 flags;
+	__u32 segnr;
+	union {
+		__u32 reserved[11];
+	};
+};
+
+#define KVM_DEV_IRQ_HOST_INTX    (1 << 0)
+#define KVM_DEV_IRQ_HOST_MSI     (1 << 1)
+#define KVM_DEV_IRQ_HOST_MSIX    (1 << 2)
+
+#define KVM_DEV_IRQ_GUEST_INTX   (1 << 8)
+#define KVM_DEV_IRQ_GUEST_MSI    (1 << 9)
+#define KVM_DEV_IRQ_GUEST_MSIX   (1 << 10)
+
+#define KVM_DEV_IRQ_HOST_MASK	 0x00ff
+#define KVM_DEV_IRQ_GUEST_MASK   0xff00
+
+struct kvm_assigned_irq {
+	__u32 assigned_dev_id;
+	__u32 host_irq; /* ignored (legacy field) */
+	__u32 guest_irq;
+	__u32 flags;
+	union {
+		__u32 reserved[12];
+	};
+};
+
+struct kvm_assigned_msix_nr {
+	__u32 assigned_dev_id;
+	__u16 entry_nr;
+	__u16 padding;
+};
+
+#define KVM_MAX_MSIX_PER_DEV		256
+struct kvm_assigned_msix_entry {
+	__u32 assigned_dev_id;
+	__u32 gsi;
+	__u16 entry; /* The index of entry in the MSI-X table */
+	__u16 padding[3];
+};
+
+#endif /* __LINUX_KVM_H */
diff --git a/include/uapi/linux/kvm_para.h b/include/uapi/linux/kvm_para.h
new file mode 100644
index 00000000000..cea2c5c72d2
--- /dev/null
+++ b/include/uapi/linux/kvm_para.h
@@ -0,0 +1,28 @@
+#ifndef _UAPI__LINUX_KVM_PARA_H
+#define _UAPI__LINUX_KVM_PARA_H
+
+/*
+ * This header file provides a method for making a hypercall to the host
+ * Architectures should define:
+ * - kvm_hypercall0, kvm_hypercall1...
+ * - kvm_arch_para_features
+ * - kvm_para_available
+ */
+
+/* Return values for hypercalls */
+#define KVM_ENOSYS		1000
+#define KVM_EFAULT		EFAULT
+#define KVM_E2BIG		E2BIG
+#define KVM_EPERM		EPERM
+
+#define KVM_HC_VAPIC_POLL_IRQ		1
+#define KVM_HC_MMU_OP			2
+#define KVM_HC_FEATURES			3
+#define KVM_HC_PPC_MAP_MAGIC_PAGE	4
+
+/*
+ * hypercalls use architecture specific
+ */
+#include <asm/kvm_para.h>
+
+#endif /* _UAPI__LINUX_KVM_PARA_H */
diff --git a/include/uapi/linux/l2tp.h b/include/uapi/linux/l2tp.h
new file mode 100644
index 00000000000..8adb6816032
--- /dev/null
+++ b/include/uapi/linux/l2tp.h
@@ -0,0 +1,180 @@
+/*
+ * L2TP-over-IP socket for L2TPv3.
+ *
+ * Author: James Chapman <jchapman@katalix.com>
+ */
+
+#ifndef _UAPI_LINUX_L2TP_H_
+#define _UAPI_LINUX_L2TP_H_
+
+#include <linux/types.h>
+#include <linux/socket.h>
+#ifndef __KERNEL__
+#include <netinet/in.h>
+#endif
+
+#define IPPROTO_L2TP		115
+
+/**
+ * struct sockaddr_l2tpip - the sockaddr structure for L2TP-over-IP sockets
+ * @l2tp_family:  address family number AF_L2TPIP.
+ * @l2tp_addr:    protocol specific address information
+ * @l2tp_conn_id: connection id of tunnel
+ */
+#define __SOCK_SIZE__	16		/* sizeof(struct sockaddr)	*/
+struct sockaddr_l2tpip {
+	/* The first fields must match struct sockaddr_in */
+	__kernel_sa_family_t l2tp_family; /* AF_INET */
+	__be16		l2tp_unused;	/* INET port number (unused) */
+	struct in_addr	l2tp_addr;	/* Internet address */
+
+	__u32		l2tp_conn_id;	/* Connection ID of tunnel */
+
+	/* Pad to size of `struct sockaddr'. */
+	unsigned char	__pad[sizeof(struct sockaddr) -
+			      sizeof(__kernel_sa_family_t) -
+			      sizeof(__be16) - sizeof(struct in_addr) -
+			      sizeof(__u32)];
+};
+
+/**
+ * struct sockaddr_l2tpip6 - the sockaddr structure for L2TP-over-IPv6 sockets
+ * @l2tp_family:  address family number AF_L2TPIP.
+ * @l2tp_addr:    protocol specific address information
+ * @l2tp_conn_id: connection id of tunnel
+ */
+struct sockaddr_l2tpip6 {
+	/* The first fields must match struct sockaddr_in6 */
+	__kernel_sa_family_t l2tp_family; /* AF_INET6 */
+	__be16		l2tp_unused;	/* INET port number (unused) */
+	__be32		l2tp_flowinfo;	/* IPv6 flow information */
+	struct in6_addr	l2tp_addr;	/* IPv6 address */
+	__u32		l2tp_scope_id;	/* scope id (new in RFC2553) */
+	__u32		l2tp_conn_id;	/* Connection ID of tunnel */
+};
+
+/*****************************************************************************
+ *  NETLINK_GENERIC netlink family.
+ *****************************************************************************/
+
+/*
+ * Commands.
+ * Valid TLVs of each command are:-
+ * TUNNEL_CREATE	- CONN_ID, pw_type, netns, ifname, ipinfo, udpinfo, udpcsum, vlanid
+ * TUNNEL_DELETE	- CONN_ID
+ * TUNNEL_MODIFY	- CONN_ID, udpcsum
+ * TUNNEL_GETSTATS	- CONN_ID, (stats)
+ * TUNNEL_GET		- CONN_ID, (...)
+ * SESSION_CREATE	- SESSION_ID, PW_TYPE, offset, data_seq, cookie, peer_cookie, offset, l2spec
+ * SESSION_DELETE	- SESSION_ID
+ * SESSION_MODIFY	- SESSION_ID, data_seq
+ * SESSION_GET		- SESSION_ID, (...)
+ * SESSION_GETSTATS	- SESSION_ID, (stats)
+ *
+ */
+enum {
+	L2TP_CMD_NOOP,
+	L2TP_CMD_TUNNEL_CREATE,
+	L2TP_CMD_TUNNEL_DELETE,
+	L2TP_CMD_TUNNEL_MODIFY,
+	L2TP_CMD_TUNNEL_GET,
+	L2TP_CMD_SESSION_CREATE,
+	L2TP_CMD_SESSION_DELETE,
+	L2TP_CMD_SESSION_MODIFY,
+	L2TP_CMD_SESSION_GET,
+	__L2TP_CMD_MAX,
+};
+
+#define L2TP_CMD_MAX			(__L2TP_CMD_MAX - 1)
+
+/*
+ * ATTR types defined for L2TP
+ */
+enum {
+	L2TP_ATTR_NONE,			/* no data */
+	L2TP_ATTR_PW_TYPE,		/* u16, enum l2tp_pwtype */
+	L2TP_ATTR_ENCAP_TYPE,		/* u16, enum l2tp_encap_type */
+	L2TP_ATTR_OFFSET,		/* u16 */
+	L2TP_ATTR_DATA_SEQ,		/* u16 */
+	L2TP_ATTR_L2SPEC_TYPE,		/* u8, enum l2tp_l2spec_type */
+	L2TP_ATTR_L2SPEC_LEN,		/* u8, enum l2tp_l2spec_type */
+	L2TP_ATTR_PROTO_VERSION,	/* u8 */
+	L2TP_ATTR_IFNAME,		/* string */
+	L2TP_ATTR_CONN_ID,		/* u32 */
+	L2TP_ATTR_PEER_CONN_ID,		/* u32 */
+	L2TP_ATTR_SESSION_ID,		/* u32 */
+	L2TP_ATTR_PEER_SESSION_ID,	/* u32 */
+	L2TP_ATTR_UDP_CSUM,		/* u8 */
+	L2TP_ATTR_VLAN_ID,		/* u16 */
+	L2TP_ATTR_COOKIE,		/* 0, 4 or 8 bytes */
+	L2TP_ATTR_PEER_COOKIE,		/* 0, 4 or 8 bytes */
+	L2TP_ATTR_DEBUG,		/* u32 */
+	L2TP_ATTR_RECV_SEQ,		/* u8 */
+	L2TP_ATTR_SEND_SEQ,		/* u8 */
+	L2TP_ATTR_LNS_MODE,		/* u8 */
+	L2TP_ATTR_USING_IPSEC,		/* u8 */
+	L2TP_ATTR_RECV_TIMEOUT,		/* msec */
+	L2TP_ATTR_FD,			/* int */
+	L2TP_ATTR_IP_SADDR,		/* u32 */
+	L2TP_ATTR_IP_DADDR,		/* u32 */
+	L2TP_ATTR_UDP_SPORT,		/* u16 */
+	L2TP_ATTR_UDP_DPORT,		/* u16 */
+	L2TP_ATTR_MTU,			/* u16 */
+	L2TP_ATTR_MRU,			/* u16 */
+	L2TP_ATTR_STATS,		/* nested */
+	L2TP_ATTR_IP6_SADDR,		/* struct in6_addr */
+	L2TP_ATTR_IP6_DADDR,		/* struct in6_addr */
+	__L2TP_ATTR_MAX,
+};
+
+#define L2TP_ATTR_MAX			(__L2TP_ATTR_MAX - 1)
+
+/* Nested in L2TP_ATTR_STATS */
+enum {
+	L2TP_ATTR_STATS_NONE,		/* no data */
+	L2TP_ATTR_TX_PACKETS,		/* u64 */
+	L2TP_ATTR_TX_BYTES,		/* u64 */
+	L2TP_ATTR_TX_ERRORS,		/* u64 */
+	L2TP_ATTR_RX_PACKETS,		/* u64 */
+	L2TP_ATTR_RX_BYTES,		/* u64 */
+	L2TP_ATTR_RX_SEQ_DISCARDS,	/* u64 */
+	L2TP_ATTR_RX_OOS_PACKETS,	/* u64 */
+	L2TP_ATTR_RX_ERRORS,		/* u64 */
+	__L2TP_ATTR_STATS_MAX,
+};
+
+#define L2TP_ATTR_STATS_MAX		(__L2TP_ATTR_STATS_MAX - 1)
+
+enum l2tp_pwtype {
+	L2TP_PWTYPE_NONE = 0x0000,
+	L2TP_PWTYPE_ETH_VLAN = 0x0004,
+	L2TP_PWTYPE_ETH = 0x0005,
+	L2TP_PWTYPE_PPP = 0x0007,
+	L2TP_PWTYPE_PPP_AC = 0x0008,
+	L2TP_PWTYPE_IP = 0x000b,
+	__L2TP_PWTYPE_MAX
+};
+
+enum l2tp_l2spec_type {
+	L2TP_L2SPECTYPE_NONE,
+	L2TP_L2SPECTYPE_DEFAULT,
+};
+
+enum l2tp_encap_type {
+	L2TP_ENCAPTYPE_UDP,
+	L2TP_ENCAPTYPE_IP,
+};
+
+enum l2tp_seqmode {
+	L2TP_SEQ_NONE = 0,
+	L2TP_SEQ_IP = 1,
+	L2TP_SEQ_ALL = 2,
+};
+
+/*
+ * NETLINK_GENERIC related info
+ */
+#define L2TP_GENL_NAME		"l2tp"
+#define L2TP_GENL_VERSION	0x1
+
+#endif /* _UAPI_LINUX_L2TP_H_ */
diff --git a/include/uapi/linux/limits.h b/include/uapi/linux/limits.h
new file mode 100644
index 00000000000..2d0f94162fb
--- /dev/null
+++ b/include/uapi/linux/limits.h
@@ -0,0 +1,20 @@
+#ifndef _LINUX_LIMITS_H
+#define _LINUX_LIMITS_H
+
+#define NR_OPEN	        1024
+
+#define NGROUPS_MAX    65536	/* supplemental group IDs are available */
+#define ARG_MAX       131072	/* # bytes of args + environ for exec() */
+#define LINK_MAX         127	/* # links a file may have */
+#define MAX_CANON        255	/* size of the canonical input queue */
+#define MAX_INPUT        255	/* size of the type-ahead buffer */
+#define NAME_MAX         255	/* # chars in a file name */
+#define PATH_MAX        4096	/* # chars in a path name including nul */
+#define PIPE_BUF        4096	/* # bytes in atomic write to a pipe */
+#define XATTR_NAME_MAX   255	/* # chars in an extended attribute name */
+#define XATTR_SIZE_MAX 65536	/* size of an extended attribute value (64k) */
+#define XATTR_LIST_MAX 65536	/* size of extended attribute namelist (64k) */
+
+#define RTSIG_MAX	  32
+
+#endif
diff --git a/include/uapi/linux/llc.h b/include/uapi/linux/llc.h
new file mode 100644
index 00000000000..9c987a40247
--- /dev/null
+++ b/include/uapi/linux/llc.h
@@ -0,0 +1,84 @@
+/*
+ * IEEE 802.2 User Interface SAPs for Linux, data structures and indicators.
+ *
+ * Copyright (c) 2001 by Jay Schulist <jschlst@samba.org>
+ *
+ * This program can be redistributed or modified under the terms of the
+ * GNU General Public License as published by the Free Software Foundation.
+ * This program is distributed without any warranty or implied warranty
+ * of merchantability or fitness for a particular purpose.
+ *
+ * See the GNU General Public License for more details.
+ */
+#ifndef _UAPI__LINUX_LLC_H
+#define _UAPI__LINUX_LLC_H
+
+#include <linux/socket.h>
+
+#define __LLC_SOCK_SIZE__ 16	/* sizeof(sockaddr_llc), word align. */
+struct sockaddr_llc {
+	__kernel_sa_family_t sllc_family; /* AF_LLC */
+	__kernel_sa_family_t sllc_arphrd; /* ARPHRD_ETHER */
+	unsigned char   sllc_test;
+	unsigned char   sllc_xid;
+	unsigned char	sllc_ua;	/* UA data, only for SOCK_STREAM. */
+	unsigned char   sllc_sap;
+	unsigned char   sllc_mac[IFHWADDRLEN];
+	unsigned char   __pad[__LLC_SOCK_SIZE__ -
+			      sizeof(__kernel_sa_family_t) * 2 -
+			      sizeof(unsigned char) * 4 - IFHWADDRLEN];
+};
+
+/* sockopt definitions. */
+enum llc_sockopts {
+	LLC_OPT_UNKNOWN = 0,
+	LLC_OPT_RETRY,		/* max retrans attempts. */
+	LLC_OPT_SIZE,		/* max PDU size (octets). */
+	LLC_OPT_ACK_TMR_EXP,	/* ack expire time (secs). */
+	LLC_OPT_P_TMR_EXP,	/* pf cycle expire time (secs). */
+	LLC_OPT_REJ_TMR_EXP,	/* rej sent expire time (secs). */
+	LLC_OPT_BUSY_TMR_EXP,	/* busy state expire time (secs). */
+	LLC_OPT_TX_WIN,		/* tx window size. */
+	LLC_OPT_RX_WIN,		/* rx window size. */
+	LLC_OPT_PKTINFO,	/* ancillary packet information. */
+	LLC_OPT_MAX
+};
+
+#define LLC_OPT_MAX_RETRY	 100
+#define LLC_OPT_MAX_SIZE	4196
+#define LLC_OPT_MAX_WIN		 127
+#define LLC_OPT_MAX_ACK_TMR_EXP	  60
+#define LLC_OPT_MAX_P_TMR_EXP	  60
+#define LLC_OPT_MAX_REJ_TMR_EXP	  60
+#define LLC_OPT_MAX_BUSY_TMR_EXP  60
+
+/* LLC SAP types. */
+#define LLC_SAP_NULL	0x00		/* NULL SAP. 			*/
+#define LLC_SAP_LLC	0x02		/* LLC Sublayer Management. 	*/
+#define LLC_SAP_SNA	0x04		/* SNA Path Control. 		*/
+#define LLC_SAP_PNM	0x0E		/* Proway Network Management.	*/	
+#define LLC_SAP_IP	0x06		/* TCP/IP. 			*/
+#define LLC_SAP_BSPAN	0x42		/* Bridge Spanning Tree Proto	*/
+#define LLC_SAP_MMS	0x4E		/* Manufacturing Message Srv.	*/
+#define LLC_SAP_8208	0x7E		/* ISO 8208			*/
+#define LLC_SAP_3COM	0x80		/* 3COM. 			*/
+#define LLC_SAP_PRO	0x8E		/* Proway Active Station List	*/
+#define LLC_SAP_SNAP	0xAA		/* SNAP. 			*/
+#define LLC_SAP_BANYAN	0xBC		/* Banyan. 			*/
+#define LLC_SAP_IPX	0xE0		/* IPX/SPX. 			*/
+#define LLC_SAP_NETBEUI	0xF0		/* NetBEUI. 			*/
+#define LLC_SAP_LANMGR	0xF4		/* LanManager. 			*/
+#define LLC_SAP_IMPL	0xF8		/* IMPL				*/
+#define LLC_SAP_DISC	0xFC		/* Discovery			*/
+#define LLC_SAP_OSI	0xFE		/* OSI Network Layers. 		*/
+#define LLC_SAP_LAR	0xDC		/* LAN Address Resolution 	*/
+#define LLC_SAP_RM	0xD4		/* Resource Management 		*/
+#define LLC_SAP_GLOBAL	0xFF		/* Global SAP. 			*/
+
+struct llc_pktinfo {
+	int lpi_ifindex;
+	unsigned char lpi_sap;
+	unsigned char lpi_mac[IFHWADDRLEN];
+};
+
+#endif /* _UAPI__LINUX_LLC_H */
diff --git a/include/uapi/linux/loop.h b/include/uapi/linux/loop.h
new file mode 100644
index 00000000000..e0cecd2eabd
--- /dev/null
+++ b/include/uapi/linux/loop.h
@@ -0,0 +1,94 @@
+/*
+ * include/linux/loop.h
+ *
+ * Written by Theodore Ts'o, 3/29/93.
+ *
+ * Copyright 1993 by Theodore Ts'o.  Redistribution of this file is
+ * permitted under the GNU General Public License.
+ */
+#ifndef _UAPI_LINUX_LOOP_H
+#define _UAPI_LINUX_LOOP_H
+
+
+#define LO_NAME_SIZE	64
+#define LO_KEY_SIZE	32
+
+
+/*
+ * Loop flags
+ */
+enum {
+	LO_FLAGS_READ_ONLY	= 1,
+	LO_FLAGS_AUTOCLEAR	= 4,
+	LO_FLAGS_PARTSCAN	= 8,
+};
+
+#include <asm/posix_types.h>	/* for __kernel_old_dev_t */
+#include <linux/types.h>	/* for __u64 */
+
+/* Backwards compatibility version */
+struct loop_info {
+	int		   lo_number;		/* ioctl r/o */
+	__kernel_old_dev_t lo_device; 		/* ioctl r/o */
+	unsigned long	   lo_inode; 		/* ioctl r/o */
+	__kernel_old_dev_t lo_rdevice; 		/* ioctl r/o */
+	int		   lo_offset;
+	int		   lo_encrypt_type;
+	int		   lo_encrypt_key_size; 	/* ioctl w/o */
+	int		   lo_flags;			/* ioctl r/o */
+	char		   lo_name[LO_NAME_SIZE];
+	unsigned char	   lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */
+	unsigned long	   lo_init[2];
+	char		   reserved[4];
+};
+
+struct loop_info64 {
+	__u64		   lo_device;			/* ioctl r/o */
+	__u64		   lo_inode;			/* ioctl r/o */
+	__u64		   lo_rdevice;			/* ioctl r/o */
+	__u64		   lo_offset;
+	__u64		   lo_sizelimit;/* bytes, 0 == max available */
+	__u32		   lo_number;			/* ioctl r/o */
+	__u32		   lo_encrypt_type;
+	__u32		   lo_encrypt_key_size;		/* ioctl w/o */
+	__u32		   lo_flags;			/* ioctl r/o */
+	__u8		   lo_file_name[LO_NAME_SIZE];
+	__u8		   lo_crypt_name[LO_NAME_SIZE];
+	__u8		   lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */
+	__u64		   lo_init[2];
+};
+
+/*
+ * Loop filter types
+ */
+
+#define LO_CRYPT_NONE		0
+#define LO_CRYPT_XOR		1
+#define LO_CRYPT_DES		2
+#define LO_CRYPT_FISH2		3    /* Twofish encryption */
+#define LO_CRYPT_BLOW		4
+#define LO_CRYPT_CAST128	5
+#define LO_CRYPT_IDEA		6
+#define LO_CRYPT_DUMMY		9
+#define LO_CRYPT_SKIPJACK	10
+#define LO_CRYPT_CRYPTOAPI	18
+#define MAX_LO_CRYPT		20
+
+/*
+ * IOCTL commands --- we will commandeer 0x4C ('L')
+ */
+
+#define LOOP_SET_FD		0x4C00
+#define LOOP_CLR_FD		0x4C01
+#define LOOP_SET_STATUS		0x4C02
+#define LOOP_GET_STATUS		0x4C03
+#define LOOP_SET_STATUS64	0x4C04
+#define LOOP_GET_STATUS64	0x4C05
+#define LOOP_CHANGE_FD		0x4C06
+#define LOOP_SET_CAPACITY	0x4C07
+
+/* /dev/loop-control interface */
+#define LOOP_CTL_ADD		0x4C80
+#define LOOP_CTL_REMOVE		0x4C81
+#define LOOP_CTL_GET_FREE	0x4C82
+#endif /* _UAPI_LINUX_LOOP_H */
diff --git a/include/uapi/linux/lp.h b/include/uapi/linux/lp.h
new file mode 100644
index 00000000000..a3406a51f19
--- /dev/null
+++ b/include/uapi/linux/lp.h
@@ -0,0 +1,100 @@
+/*
+ * usr/include/linux/lp.h c.1991-1992 James Wiegand
+ * many modifications copyright (C) 1992 Michael K. Johnson
+ * Interrupt support added 1993 Nigel Gamble
+ * Removed 8255 status defines from inside __KERNEL__ Marcelo Tosatti 
+ */
+#ifndef _UAPI_LINUX_LP_H
+#define _UAPI_LINUX_LP_H
+
+
+/*
+ * Per POSIX guidelines, this module reserves the LP and lp prefixes
+ * These are the lp_table[minor].flags flags...
+ */
+#define LP_EXIST 0x0001
+#define LP_SELEC 0x0002
+#define LP_BUSY	 0x0004
+#define LP_BUSY_BIT_POS 2
+#define LP_OFFL	 0x0008
+#define LP_NOPA  0x0010
+#define LP_ERR   0x0020
+#define LP_ABORT 0x0040
+#define LP_CAREFUL 0x0080 /* obsoleted -arca */
+#define LP_ABORTOPEN 0x0100
+
+#define LP_TRUST_IRQ_  0x0200 /* obsolete */
+#define LP_NO_REVERSE  0x0400 /* No reverse mode available. */
+#define LP_DATA_AVAIL  0x0800 /* Data is available. */
+
+/* 
+ * bit defines for 8255 status port
+ * base + 1
+ * accessed with LP_S(minor), which gets the byte...
+ */
+#define LP_PBUSY	0x80  /* inverted input, active high */
+#define LP_PACK		0x40  /* unchanged input, active low */
+#define LP_POUTPA	0x20  /* unchanged input, active high */
+#define LP_PSELECD	0x10  /* unchanged input, active high */
+#define LP_PERRORP	0x08  /* unchanged input, active low */
+
+/* timeout for each character.  This is relative to bus cycles -- it
+ * is the count in a busy loop.  THIS IS THE VALUE TO CHANGE if you
+ * have extremely slow printing, or if the machine seems to slow down
+ * a lot when you print.  If you have slow printing, increase this
+ * number and recompile, and if your system gets bogged down, decrease
+ * this number.  This can be changed with the tunelp(8) command as well.
+ */
+
+#define LP_INIT_CHAR 1000
+
+/* The parallel port specs apparently say that there needs to be
+ * a .5usec wait before and after the strobe.
+ */
+
+#define LP_INIT_WAIT 1
+
+/* This is the amount of time that the driver waits for the printer to
+ * catch up when the printer's buffer appears to be filled.  If you
+ * want to tune this and have a fast printer (i.e. HPIIIP), decrease
+ * this number, and if you have a slow printer, increase this number.
+ * This is in hundredths of a second, the default 2 being .05 second.
+ * Or use the tunelp(8) command, which is especially nice if you want
+ * change back and forth between character and graphics printing, which
+ * are wildly different...
+ */
+
+#define LP_INIT_TIME 2
+
+/* IOCTL numbers */
+#define LPCHAR   0x0601  /* corresponds to LP_INIT_CHAR */
+#define LPTIME   0x0602  /* corresponds to LP_INIT_TIME */
+#define LPABORT  0x0604  /* call with TRUE arg to abort on error,
+			    FALSE to retry.  Default is retry.  */
+#define LPSETIRQ 0x0605  /* call with new IRQ number,
+			    or 0 for polling (no IRQ) */
+#define LPGETIRQ 0x0606  /* get the current IRQ number */
+#define LPWAIT   0x0608  /* corresponds to LP_INIT_WAIT */
+/* NOTE: LPCAREFUL is obsoleted and it' s always the default right now -arca */
+#define LPCAREFUL   0x0609  /* call with TRUE arg to require out-of-paper, off-
+			    line, and error indicators good on all writes,
+			    FALSE to ignore them.  Default is ignore. */
+#define LPABORTOPEN 0x060a  /* call with TRUE arg to abort open() on error,
+			    FALSE to ignore error.  Default is ignore.  */
+#define LPGETSTATUS 0x060b  /* return LP_S(minor) */
+#define LPRESET     0x060c  /* reset printer */
+#ifdef LP_STATS
+#define LPGETSTATS  0x060d  /* get statistics (struct lp_stats) */
+#endif
+#define LPGETFLAGS  0x060e  /* get status flags */
+#define LPSETTIMEOUT 0x060f /* set parport timeout */
+
+/* timeout for printk'ing a timeout, in jiffies (100ths of a second).
+   This is also used for re-checking error conditions if LP_ABORT is
+   not set.  This is the default behavior. */
+
+#define LP_TIMEOUT_INTERRUPT	(60 * HZ)
+#define LP_TIMEOUT_POLLED	(10 * HZ)
+
+
+#endif /* _UAPI_LINUX_LP_H */
diff --git a/include/uapi/linux/magic.h b/include/uapi/linux/magic.h
new file mode 100644
index 00000000000..e15192cb9cf
--- /dev/null
+++ b/include/uapi/linux/magic.h
@@ -0,0 +1,72 @@
+#ifndef __LINUX_MAGIC_H__
+#define __LINUX_MAGIC_H__
+
+#define ADFS_SUPER_MAGIC	0xadf5
+#define AFFS_SUPER_MAGIC	0xadff
+#define AFS_SUPER_MAGIC                0x5346414F
+#define AUTOFS_SUPER_MAGIC	0x0187
+#define CODA_SUPER_MAGIC	0x73757245
+#define CRAMFS_MAGIC		0x28cd3d45	/* some random number */
+#define CRAMFS_MAGIC_WEND	0x453dcd28	/* magic number with the wrong endianess */
+#define DEBUGFS_MAGIC          0x64626720
+#define SECURITYFS_MAGIC	0x73636673
+#define SELINUX_MAGIC		0xf97cff8c
+#define RAMFS_MAGIC		0x858458f6	/* some random number */
+#define TMPFS_MAGIC		0x01021994
+#define HUGETLBFS_MAGIC 	0x958458f6	/* some random number */
+#define SQUASHFS_MAGIC		0x73717368
+#define ECRYPTFS_SUPER_MAGIC	0xf15f
+#define EFS_SUPER_MAGIC		0x414A53
+#define EXT2_SUPER_MAGIC	0xEF53
+#define EXT3_SUPER_MAGIC	0xEF53
+#define XENFS_SUPER_MAGIC	0xabba1974
+#define EXT4_SUPER_MAGIC	0xEF53
+#define BTRFS_SUPER_MAGIC	0x9123683E
+#define NILFS_SUPER_MAGIC	0x3434
+#define HPFS_SUPER_MAGIC	0xf995e849
+#define ISOFS_SUPER_MAGIC	0x9660
+#define JFFS2_SUPER_MAGIC	0x72b6
+#define PSTOREFS_MAGIC		0x6165676C
+
+#define MINIX_SUPER_MAGIC	0x137F		/* minix v1 fs, 14 char names */
+#define MINIX_SUPER_MAGIC2	0x138F		/* minix v1 fs, 30 char names */
+#define MINIX2_SUPER_MAGIC	0x2468		/* minix v2 fs, 14 char names */
+#define MINIX2_SUPER_MAGIC2	0x2478		/* minix v2 fs, 30 char names */
+#define MINIX3_SUPER_MAGIC	0x4d5a		/* minix v3 fs, 60 char names */
+
+#define MSDOS_SUPER_MAGIC	0x4d44		/* MD */
+#define NCP_SUPER_MAGIC		0x564c		/* Guess, what 0x564c is :-) */
+#define NFS_SUPER_MAGIC		0x6969
+#define OPENPROM_SUPER_MAGIC	0x9fa1
+#define QNX4_SUPER_MAGIC	0x002f		/* qnx4 fs detection */
+#define QNX6_SUPER_MAGIC	0x68191122	/* qnx6 fs detection */
+
+#define REISERFS_SUPER_MAGIC	0x52654973	/* used by gcc */
+					/* used by file system utilities that
+	                                   look at the superblock, etc.  */
+#define REISERFS_SUPER_MAGIC_STRING	"ReIsErFs"
+#define REISER2FS_SUPER_MAGIC_STRING	"ReIsEr2Fs"
+#define REISER2FS_JR_SUPER_MAGIC_STRING	"ReIsEr3Fs"
+
+#define SMB_SUPER_MAGIC		0x517B
+#define CGROUP_SUPER_MAGIC	0x27e0eb
+
+
+#define STACK_END_MAGIC		0x57AC6E9D
+
+#define V9FS_MAGIC		0x01021997
+
+#define BDEVFS_MAGIC            0x62646576
+#define BINFMTFS_MAGIC          0x42494e4d
+#define DEVPTS_SUPER_MAGIC	0x1cd1
+#define FUTEXFS_SUPER_MAGIC	0xBAD1DEA
+#define PIPEFS_MAGIC            0x50495045
+#define PROC_SUPER_MAGIC	0x9fa0
+#define SOCKFS_MAGIC		0x534F434B
+#define SYSFS_MAGIC		0x62656572
+#define USBDEVICE_SUPER_MAGIC	0x9fa2
+#define MTD_INODE_FS_MAGIC      0x11307854
+#define ANON_INODE_FS_MAGIC	0x09041934
+
+
+#endif /* __LINUX_MAGIC_H__ */
diff --git a/include/uapi/linux/major.h b/include/uapi/linux/major.h
new file mode 100644
index 00000000000..6a8ca98c9a9
--- /dev/null
+++ b/include/uapi/linux/major.h
@@ -0,0 +1,177 @@
+#ifndef _LINUX_MAJOR_H
+#define _LINUX_MAJOR_H
+
+/*
+ * This file has definitions for major device numbers.
+ * For the device number assignments, see Documentation/devices.txt.
+ */
+
+#define UNNAMED_MAJOR		0
+#define MEM_MAJOR		1
+#define RAMDISK_MAJOR		1
+#define FLOPPY_MAJOR		2
+#define PTY_MASTER_MAJOR	2
+#define IDE0_MAJOR		3
+#define HD_MAJOR		IDE0_MAJOR
+#define PTY_SLAVE_MAJOR		3
+#define TTY_MAJOR		4
+#define TTYAUX_MAJOR		5
+#define LP_MAJOR		6
+#define VCS_MAJOR		7
+#define LOOP_MAJOR		7
+#define SCSI_DISK0_MAJOR	8
+#define SCSI_TAPE_MAJOR		9
+#define MD_MAJOR		9
+#define MISC_MAJOR		10
+#define SCSI_CDROM_MAJOR	11
+#define MUX_MAJOR		11	/* PA-RISC only */
+#define XT_DISK_MAJOR		13
+#define INPUT_MAJOR		13
+#define SOUND_MAJOR		14
+#define CDU31A_CDROM_MAJOR	15
+#define JOYSTICK_MAJOR		15
+#define GOLDSTAR_CDROM_MAJOR	16
+#define OPTICS_CDROM_MAJOR	17
+#define SANYO_CDROM_MAJOR	18
+#define CYCLADES_MAJOR		19
+#define CYCLADESAUX_MAJOR	20
+#define MITSUMI_X_CDROM_MAJOR	20
+#define MFM_ACORN_MAJOR		21	/* ARM Linux /dev/mfm */
+#define SCSI_GENERIC_MAJOR	21
+#define IDE1_MAJOR		22
+#define DIGICU_MAJOR		22
+#define DIGI_MAJOR		23
+#define MITSUMI_CDROM_MAJOR	23
+#define CDU535_CDROM_MAJOR	24
+#define STL_SERIALMAJOR		24
+#define MATSUSHITA_CDROM_MAJOR	25
+#define STL_CALLOUTMAJOR	25
+#define MATSUSHITA_CDROM2_MAJOR	26
+#define QIC117_TAPE_MAJOR	27
+#define MATSUSHITA_CDROM3_MAJOR	27
+#define MATSUSHITA_CDROM4_MAJOR	28
+#define STL_SIOMEMMAJOR		28
+#define ACSI_MAJOR		28
+#define AZTECH_CDROM_MAJOR	29
+#define FB_MAJOR		29   /* /dev/fb* framebuffers */
+#define CM206_CDROM_MAJOR	32
+#define IDE2_MAJOR		33
+#define IDE3_MAJOR		34
+#define Z8530_MAJOR		34
+#define XPRAM_MAJOR		35   /* Expanded storage on S/390: "slow ram"*/
+#define NETLINK_MAJOR		36
+#define PS2ESDI_MAJOR		36
+#define IDETAPE_MAJOR		37
+#define Z2RAM_MAJOR		37
+#define APBLOCK_MAJOR		38   /* AP1000 Block device */
+#define DDV_MAJOR		39   /* AP1000 DDV block device */
+#define NBD_MAJOR		43   /* Network block device	*/
+#define RISCOM8_NORMAL_MAJOR	48
+#define DAC960_MAJOR		48   /* 48..55 */
+#define RISCOM8_CALLOUT_MAJOR	49
+#define MKISS_MAJOR		55
+#define DSP56K_MAJOR		55   /* DSP56001 processor device */
+
+#define IDE4_MAJOR		56
+#define IDE5_MAJOR		57
+
+#define SCSI_DISK1_MAJOR	65
+#define SCSI_DISK2_MAJOR	66
+#define SCSI_DISK3_MAJOR	67
+#define SCSI_DISK4_MAJOR	68
+#define SCSI_DISK5_MAJOR	69
+#define SCSI_DISK6_MAJOR	70
+#define SCSI_DISK7_MAJOR	71
+
+#define COMPAQ_SMART2_MAJOR	72
+#define COMPAQ_SMART2_MAJOR1	73
+#define COMPAQ_SMART2_MAJOR2	74
+#define COMPAQ_SMART2_MAJOR3	75
+#define COMPAQ_SMART2_MAJOR4	76
+#define COMPAQ_SMART2_MAJOR5	77
+#define COMPAQ_SMART2_MAJOR6	78
+#define COMPAQ_SMART2_MAJOR7	79
+
+#define SPECIALIX_NORMAL_MAJOR	75
+#define SPECIALIX_CALLOUT_MAJOR	76
+
+#define AURORA_MAJOR		79
+
+#define I2O_MAJOR		80	/* 80->87 */
+
+#define SHMIQ_MAJOR		85   /* Linux/mips, SGI /dev/shmiq */
+#define SCSI_CHANGER_MAJOR      86
+
+#define IDE6_MAJOR		88
+#define IDE7_MAJOR		89
+#define IDE8_MAJOR		90
+#define IDE9_MAJOR		91
+
+#define DASD_MAJOR		94
+
+#define MDISK_MAJOR		95
+
+#define UBD_MAJOR		98
+
+#define PP_MAJOR		99
+#define JSFD_MAJOR		99
+
+#define PHONE_MAJOR		100
+
+#define COMPAQ_CISS_MAJOR	104
+#define COMPAQ_CISS_MAJOR1	105
+#define COMPAQ_CISS_MAJOR2      106
+#define COMPAQ_CISS_MAJOR3      107
+#define COMPAQ_CISS_MAJOR4      108
+#define COMPAQ_CISS_MAJOR5      109
+#define COMPAQ_CISS_MAJOR6      110
+#define COMPAQ_CISS_MAJOR7      111
+
+#define VIODASD_MAJOR		112
+#define VIOCD_MAJOR		113
+
+#define ATARAID_MAJOR		114
+
+#define SCSI_DISK8_MAJOR	128
+#define SCSI_DISK9_MAJOR	129
+#define SCSI_DISK10_MAJOR	130
+#define SCSI_DISK11_MAJOR	131
+#define SCSI_DISK12_MAJOR	132
+#define SCSI_DISK13_MAJOR	133
+#define SCSI_DISK14_MAJOR	134
+#define SCSI_DISK15_MAJOR	135
+
+#define UNIX98_PTY_MASTER_MAJOR	128
+#define UNIX98_PTY_MAJOR_COUNT	8
+#define UNIX98_PTY_SLAVE_MAJOR	(UNIX98_PTY_MASTER_MAJOR+UNIX98_PTY_MAJOR_COUNT)
+
+#define DRBD_MAJOR		147
+#define RTF_MAJOR		150
+#define RAW_MAJOR		162
+
+#define USB_ACM_MAJOR		166
+#define USB_ACM_AUX_MAJOR	167
+#define USB_CHAR_MAJOR		180
+
+#define MMC_BLOCK_MAJOR		179
+
+#define VXVM_MAJOR		199	/* VERITAS volume i/o driver    */
+#define VXSPEC_MAJOR		200	/* VERITAS volume config driver */
+#define VXDMP_MAJOR		201	/* VERITAS volume multipath driver */
+
+#define XENVBD_MAJOR		202	/* Xen virtual block device */
+
+#define MSR_MAJOR		202
+#define CPUID_MAJOR		203
+
+#define OSST_MAJOR		206	/* OnStream-SCx0 SCSI tape */
+
+#define IBM_TTY3270_MAJOR	227
+#define IBM_FS3270_MAJOR	228
+
+#define VIOTAPE_MAJOR		230
+
+#define BLOCK_EXT_MAJOR		259
+#define SCSI_OSD_MAJOR		260	/* open-osd's OSD scsi device */
+
+#endif
diff --git a/include/uapi/linux/map_to_7segment.h b/include/uapi/linux/map_to_7segment.h
new file mode 100644
index 00000000000..12d62a54d47
--- /dev/null
+++ b/include/uapi/linux/map_to_7segment.h
@@ -0,0 +1,187 @@
+/*
+ * Copyright (c) 2005 Henk Vergonet <Henk.Vergonet@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef MAP_TO_7SEGMENT_H
+#define MAP_TO_7SEGMENT_H
+
+/* This file provides translation primitives and tables for the conversion
+ * of (ASCII) characters to a 7-segments notation.
+ *
+ * The 7 segment's wikipedia notation below is used as standard.
+ * See: http://en.wikipedia.org/wiki/Seven_segment_display
+ *
+ * Notation:	+-a-+
+ *		f   b
+ *		+-g-+
+ *		e   c
+ *		+-d-+
+ *
+ * Usage:
+ *
+ *   Register a map variable, and fill it with a character set:
+ *	static SEG7_DEFAULT_MAP(map_seg7);
+ *
+ *
+ *   Then use for conversion:
+ *	seg7 = map_to_seg7(&map_seg7, some_char);
+ *	...
+ *
+ * In device drivers it is recommended, if required, to make the char map
+ * accessible via the sysfs interface using the following scheme:
+ *
+ * static ssize_t show_map(struct device *dev, char *buf) {
+ *	memcpy(buf, &map_seg7, sizeof(map_seg7));
+ *	return sizeof(map_seg7);
+ * }
+ * static ssize_t store_map(struct device *dev, const char *buf, size_t cnt) {
+ *	if(cnt != sizeof(map_seg7))
+ *		return -EINVAL;
+ *	memcpy(&map_seg7, buf, cnt);
+ *	return cnt;
+ * }
+ * static DEVICE_ATTR(map_seg7, PERMS_RW, show_map, store_map);
+ *
+ * History:
+ * 2005-05-31	RFC linux-kernel@vger.kernel.org
+ */
+#include <linux/errno.h>
+
+
+#define BIT_SEG7_A		0
+#define BIT_SEG7_B		1
+#define BIT_SEG7_C		2
+#define BIT_SEG7_D		3
+#define BIT_SEG7_E		4
+#define BIT_SEG7_F		5
+#define BIT_SEG7_G		6
+#define BIT_SEG7_RESERVED	7
+
+struct seg7_conversion_map {
+	unsigned char	table[128];
+};
+
+static __inline__ int map_to_seg7(struct seg7_conversion_map *map, int c)
+{
+	return c >= 0 && c < sizeof(map->table) ? map->table[c] : -EINVAL;
+}
+
+#define SEG7_CONVERSION_MAP(_name, _map)	\
+	struct seg7_conversion_map _name = { .table = { _map } }
+
+/*
+ * It is recommended to use a facility that allows user space to redefine
+ * custom character sets for LCD devices. Please use a sysfs interface
+ * as described above.
+ */
+#define MAP_TO_SEG7_SYSFS_FILE	"map_seg7"
+
+/*******************************************************************************
+ * ASCII conversion table
+ ******************************************************************************/
+
+#define _SEG7(l,a,b,c,d,e,f,g)	\
+      (	a<<BIT_SEG7_A |	b<<BIT_SEG7_B |	c<<BIT_SEG7_C |	d<<BIT_SEG7_D |	\
+	e<<BIT_SEG7_E |	f<<BIT_SEG7_F |	g<<BIT_SEG7_G )
+
+#define _MAP_0_32_ASCII_SEG7_NON_PRINTABLE	\
+	0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
+
+#define _MAP_33_47_ASCII_SEG7_SYMBOL		\
+ _SEG7('!',0,0,0,0,1,1,0), _SEG7('"',0,1,0,0,0,1,0), _SEG7('#',0,1,1,0,1,1,0),\
+ _SEG7('$',1,0,1,1,0,1,1), _SEG7('%',0,0,1,0,0,1,0), _SEG7('&',1,0,1,1,1,1,1),\
+ _SEG7('\'',0,0,0,0,0,1,0),_SEG7('(',1,0,0,1,1,1,0), _SEG7(')',1,1,1,1,0,0,0),\
+ _SEG7('*',0,1,1,0,1,1,1), _SEG7('+',0,1,1,0,0,0,1), _SEG7(',',0,0,0,0,1,0,0),\
+ _SEG7('-',0,0,0,0,0,0,1), _SEG7('.',0,0,0,0,1,0,0), _SEG7('/',0,1,0,0,1,0,1),
+
+#define _MAP_48_57_ASCII_SEG7_NUMERIC		\
+ _SEG7('0',1,1,1,1,1,1,0), _SEG7('1',0,1,1,0,0,0,0), _SEG7('2',1,1,0,1,1,0,1),\
+ _SEG7('3',1,1,1,1,0,0,1), _SEG7('4',0,1,1,0,0,1,1), _SEG7('5',1,0,1,1,0,1,1),\
+ _SEG7('6',1,0,1,1,1,1,1), _SEG7('7',1,1,1,0,0,0,0), _SEG7('8',1,1,1,1,1,1,1),\
+ _SEG7('9',1,1,1,1,0,1,1),
+
+#define _MAP_58_64_ASCII_SEG7_SYMBOL		\
+ _SEG7(':',0,0,0,1,0,0,1), _SEG7(';',0,0,0,1,0,0,1), _SEG7('<',1,0,0,0,0,1,1),\
+ _SEG7('=',0,0,0,1,0,0,1), _SEG7('>',1,1,0,0,0,0,1), _SEG7('?',1,1,1,0,0,1,0),\
+ _SEG7('@',1,1,0,1,1,1,1),
+
+#define _MAP_65_90_ASCII_SEG7_ALPHA_UPPR	\
+ _SEG7('A',1,1,1,0,1,1,1), _SEG7('B',1,1,1,1,1,1,1), _SEG7('C',1,0,0,1,1,1,0),\
+ _SEG7('D',1,1,1,1,1,1,0), _SEG7('E',1,0,0,1,1,1,1), _SEG7('F',1,0,0,0,1,1,1),\
+ _SEG7('G',1,1,1,1,0,1,1), _SEG7('H',0,1,1,0,1,1,1), _SEG7('I',0,1,1,0,0,0,0),\
+ _SEG7('J',0,1,1,1,0,0,0), _SEG7('K',0,1,1,0,1,1,1), _SEG7('L',0,0,0,1,1,1,0),\
+ _SEG7('M',1,1,1,0,1,1,0), _SEG7('N',1,1,1,0,1,1,0), _SEG7('O',1,1,1,1,1,1,0),\
+ _SEG7('P',1,1,0,0,1,1,1), _SEG7('Q',1,1,1,1,1,1,0), _SEG7('R',1,1,1,0,1,1,1),\
+ _SEG7('S',1,0,1,1,0,1,1), _SEG7('T',0,0,0,1,1,1,1), _SEG7('U',0,1,1,1,1,1,0),\
+ _SEG7('V',0,1,1,1,1,1,0), _SEG7('W',0,1,1,1,1,1,1), _SEG7('X',0,1,1,0,1,1,1),\
+ _SEG7('Y',0,1,1,0,0,1,1), _SEG7('Z',1,1,0,1,1,0,1),
+
+#define _MAP_91_96_ASCII_SEG7_SYMBOL		\
+ _SEG7('[',1,0,0,1,1,1,0), _SEG7('\\',0,0,1,0,0,1,1),_SEG7(']',1,1,1,1,0,0,0),\
+ _SEG7('^',1,1,0,0,0,1,0), _SEG7('_',0,0,0,1,0,0,0), _SEG7('`',0,1,0,0,0,0,0),
+
+#define _MAP_97_122_ASCII_SEG7_ALPHA_LOWER	\
+ _SEG7('A',1,1,1,0,1,1,1), _SEG7('b',0,0,1,1,1,1,1), _SEG7('c',0,0,0,1,1,0,1),\
+ _SEG7('d',0,1,1,1,1,0,1), _SEG7('E',1,0,0,1,1,1,1), _SEG7('F',1,0,0,0,1,1,1),\
+ _SEG7('G',1,1,1,1,0,1,1), _SEG7('h',0,0,1,0,1,1,1), _SEG7('i',0,0,1,0,0,0,0),\
+ _SEG7('j',0,0,1,1,0,0,0), _SEG7('k',0,0,1,0,1,1,1), _SEG7('L',0,0,0,1,1,1,0),\
+ _SEG7('M',1,1,1,0,1,1,0), _SEG7('n',0,0,1,0,1,0,1), _SEG7('o',0,0,1,1,1,0,1),\
+ _SEG7('P',1,1,0,0,1,1,1), _SEG7('q',1,1,1,0,0,1,1), _SEG7('r',0,0,0,0,1,0,1),\
+ _SEG7('S',1,0,1,1,0,1,1), _SEG7('T',0,0,0,1,1,1,1), _SEG7('u',0,0,1,1,1,0,0),\
+ _SEG7('v',0,0,1,1,1,0,0), _SEG7('W',0,1,1,1,1,1,1), _SEG7('X',0,1,1,0,1,1,1),\
+ _SEG7('y',0,1,1,1,0,1,1), _SEG7('Z',1,1,0,1,1,0,1),
+
+#define _MAP_123_126_ASCII_SEG7_SYMBOL		\
+ _SEG7('{',1,0,0,1,1,1,0), _SEG7('|',0,0,0,0,1,1,0), _SEG7('}',1,1,1,1,0,0,0),\
+ _SEG7('~',1,0,0,0,0,0,0),
+
+/* Maps */
+
+/* This set tries to map as close as possible to the visible characteristics
+ * of the ASCII symbol, lowercase and uppercase letters may differ in
+ * presentation on the display.
+ */
+#define MAP_ASCII7SEG_ALPHANUM			\
+	_MAP_0_32_ASCII_SEG7_NON_PRINTABLE	\
+	_MAP_33_47_ASCII_SEG7_SYMBOL		\
+	_MAP_48_57_ASCII_SEG7_NUMERIC		\
+	_MAP_58_64_ASCII_SEG7_SYMBOL		\
+	_MAP_65_90_ASCII_SEG7_ALPHA_UPPR	\
+	_MAP_91_96_ASCII_SEG7_SYMBOL		\
+	_MAP_97_122_ASCII_SEG7_ALPHA_LOWER	\
+	_MAP_123_126_ASCII_SEG7_SYMBOL
+
+/* This set tries to map as close as possible to the symbolic characteristics
+ * of the ASCII character for maximum discrimination.
+ * For now this means all alpha chars are in lower case representations.
+ * (This for example facilitates the use of hex numbers with uppercase input.)
+ */
+#define MAP_ASCII7SEG_ALPHANUM_LC			\
+	_MAP_0_32_ASCII_SEG7_NON_PRINTABLE	\
+	_MAP_33_47_ASCII_SEG7_SYMBOL		\
+	_MAP_48_57_ASCII_SEG7_NUMERIC		\
+	_MAP_58_64_ASCII_SEG7_SYMBOL		\
+	_MAP_97_122_ASCII_SEG7_ALPHA_LOWER	\
+	_MAP_91_96_ASCII_SEG7_SYMBOL		\
+	_MAP_97_122_ASCII_SEG7_ALPHA_LOWER	\
+	_MAP_123_126_ASCII_SEG7_SYMBOL
+
+#define SEG7_DEFAULT_MAP(_name)		\
+	SEG7_CONVERSION_MAP(_name,MAP_ASCII7SEG_ALPHANUM)
+
+#endif	/* MAP_TO_7SEGMENT_H */
+
diff --git a/include/uapi/linux/matroxfb.h b/include/uapi/linux/matroxfb.h
new file mode 100644
index 00000000000..8c22a893864
--- /dev/null
+++ b/include/uapi/linux/matroxfb.h
@@ -0,0 +1,42 @@
+#ifndef __LINUX_MATROXFB_H__
+#define __LINUX_MATROXFB_H__
+
+#include <asm/ioctl.h>
+#include <linux/types.h>
+#include <linux/videodev2.h>
+#include <linux/fb.h>
+
+struct matroxioc_output_mode {
+	__u32	output;		/* which output */
+#define MATROXFB_OUTPUT_PRIMARY		0x0000
+#define MATROXFB_OUTPUT_SECONDARY	0x0001
+#define MATROXFB_OUTPUT_DFP		0x0002
+	__u32	mode;		/* which mode */
+#define MATROXFB_OUTPUT_MODE_PAL	0x0001
+#define MATROXFB_OUTPUT_MODE_NTSC	0x0002
+#define MATROXFB_OUTPUT_MODE_MONITOR	0x0080
+};
+#define MATROXFB_SET_OUTPUT_MODE	_IOW('n',0xFA,size_t)
+#define MATROXFB_GET_OUTPUT_MODE	_IOWR('n',0xFA,size_t)
+
+/* bitfield */
+#define MATROXFB_OUTPUT_CONN_PRIMARY	(1 << MATROXFB_OUTPUT_PRIMARY)
+#define MATROXFB_OUTPUT_CONN_SECONDARY	(1 << MATROXFB_OUTPUT_SECONDARY)
+#define MATROXFB_OUTPUT_CONN_DFP	(1 << MATROXFB_OUTPUT_DFP)
+/* connect these outputs to this framebuffer */
+#define MATROXFB_SET_OUTPUT_CONNECTION	_IOW('n',0xF8,size_t)
+/* which outputs are connected to this framebuffer */
+#define MATROXFB_GET_OUTPUT_CONNECTION	_IOR('n',0xF8,size_t)
+/* which outputs are available for this framebuffer */
+#define MATROXFB_GET_AVAILABLE_OUTPUTS	_IOR('n',0xF9,size_t)
+/* which outputs exist on this framebuffer */
+#define MATROXFB_GET_ALL_OUTPUTS	_IOR('n',0xFB,size_t)
+
+enum matroxfb_ctrl_id {
+  MATROXFB_CID_TESTOUT	 = V4L2_CID_PRIVATE_BASE,
+  MATROXFB_CID_DEFLICKER,
+  MATROXFB_CID_LAST
+};
+
+#endif
+
diff --git a/include/uapi/linux/mdio.h b/include/uapi/linux/mdio.h
new file mode 100644
index 00000000000..c94a510a577
--- /dev/null
+++ b/include/uapi/linux/mdio.h
@@ -0,0 +1,297 @@
+/*
+ * linux/mdio.h: definitions for MDIO (clause 45) transceivers
+ * Copyright 2006-2009 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef _UAPI__LINUX_MDIO_H__
+#define _UAPI__LINUX_MDIO_H__
+
+#include <linux/types.h>
+#include <linux/mii.h>
+
+/* MDIO Manageable Devices (MMDs). */
+#define MDIO_MMD_PMAPMD		1	/* Physical Medium Attachment/
+					 * Physical Medium Dependent */
+#define MDIO_MMD_WIS		2	/* WAN Interface Sublayer */
+#define MDIO_MMD_PCS		3	/* Physical Coding Sublayer */
+#define MDIO_MMD_PHYXS		4	/* PHY Extender Sublayer */
+#define MDIO_MMD_DTEXS		5	/* DTE Extender Sublayer */
+#define MDIO_MMD_TC		6	/* Transmission Convergence */
+#define MDIO_MMD_AN		7	/* Auto-Negotiation */
+#define MDIO_MMD_C22EXT		29	/* Clause 22 extension */
+#define MDIO_MMD_VEND1		30	/* Vendor specific 1 */
+#define MDIO_MMD_VEND2		31	/* Vendor specific 2 */
+
+/* Generic MDIO registers. */
+#define MDIO_CTRL1		MII_BMCR
+#define MDIO_STAT1		MII_BMSR
+#define MDIO_DEVID1		MII_PHYSID1
+#define MDIO_DEVID2		MII_PHYSID2
+#define MDIO_SPEED		4	/* Speed ability */
+#define MDIO_DEVS1		5	/* Devices in package */
+#define MDIO_DEVS2		6
+#define MDIO_CTRL2		7	/* 10G control 2 */
+#define MDIO_STAT2		8	/* 10G status 2 */
+#define MDIO_PMA_TXDIS		9	/* 10G PMA/PMD transmit disable */
+#define MDIO_PMA_RXDET		10	/* 10G PMA/PMD receive signal detect */
+#define MDIO_PMA_EXTABLE	11	/* 10G PMA/PMD extended ability */
+#define MDIO_PKGID1		14	/* Package identifier */
+#define MDIO_PKGID2		15
+#define MDIO_AN_ADVERTISE	16	/* AN advertising (base page) */
+#define MDIO_AN_LPA		19	/* AN LP abilities (base page) */
+#define MDIO_PCS_EEE_ABLE	20	/* EEE Capability register */
+#define MDIO_PCS_EEE_WK_ERR	22	/* EEE wake error counter */
+#define MDIO_PHYXS_LNSTAT	24	/* PHY XGXS lane state */
+#define MDIO_AN_EEE_ADV		60	/* EEE advertisement */
+#define MDIO_AN_EEE_LPABLE	61	/* EEE link partner ability */
+
+/* Media-dependent registers. */
+#define MDIO_PMA_10GBT_SWAPPOL	130	/* 10GBASE-T pair swap & polarity */
+#define MDIO_PMA_10GBT_TXPWR	131	/* 10GBASE-T TX power control */
+#define MDIO_PMA_10GBT_SNR	133	/* 10GBASE-T SNR margin, lane A.
+					 * Lanes B-D are numbered 134-136. */
+#define MDIO_PMA_10GBR_FECABLE	170	/* 10GBASE-R FEC ability */
+#define MDIO_PCS_10GBX_STAT1	24	/* 10GBASE-X PCS status 1 */
+#define MDIO_PCS_10GBRT_STAT1	32	/* 10GBASE-R/-T PCS status 1 */
+#define MDIO_PCS_10GBRT_STAT2	33	/* 10GBASE-R/-T PCS status 2 */
+#define MDIO_AN_10GBT_CTRL	32	/* 10GBASE-T auto-negotiation control */
+#define MDIO_AN_10GBT_STAT	33	/* 10GBASE-T auto-negotiation status */
+
+/* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */
+#define MDIO_PMA_LASI_RXCTRL	0x9000	/* RX_ALARM control */
+#define MDIO_PMA_LASI_TXCTRL	0x9001	/* TX_ALARM control */
+#define MDIO_PMA_LASI_CTRL	0x9002	/* LASI control */
+#define MDIO_PMA_LASI_RXSTAT	0x9003	/* RX_ALARM status */
+#define MDIO_PMA_LASI_TXSTAT	0x9004	/* TX_ALARM status */
+#define MDIO_PMA_LASI_STAT	0x9005	/* LASI status */
+
+/* Control register 1. */
+/* Enable extended speed selection */
+#define MDIO_CTRL1_SPEEDSELEXT		(BMCR_SPEED1000 | BMCR_SPEED100)
+/* All speed selection bits */
+#define MDIO_CTRL1_SPEEDSEL		(MDIO_CTRL1_SPEEDSELEXT | 0x003c)
+#define MDIO_CTRL1_FULLDPLX		BMCR_FULLDPLX
+#define MDIO_CTRL1_LPOWER		BMCR_PDOWN
+#define MDIO_CTRL1_RESET		BMCR_RESET
+#define MDIO_PMA_CTRL1_LOOPBACK		0x0001
+#define MDIO_PMA_CTRL1_SPEED1000	BMCR_SPEED1000
+#define MDIO_PMA_CTRL1_SPEED100		BMCR_SPEED100
+#define MDIO_PCS_CTRL1_LOOPBACK		BMCR_LOOPBACK
+#define MDIO_PHYXS_CTRL1_LOOPBACK	BMCR_LOOPBACK
+#define MDIO_AN_CTRL1_RESTART		BMCR_ANRESTART
+#define MDIO_AN_CTRL1_ENABLE		BMCR_ANENABLE
+#define MDIO_AN_CTRL1_XNP		0x2000	/* Enable extended next page */
+#define MDIO_PCS_CTRL1_CLKSTOP_EN	0x400	/* Stop the clock during LPI */
+
+/* 10 Gb/s */
+#define MDIO_CTRL1_SPEED10G		(MDIO_CTRL1_SPEEDSELEXT | 0x00)
+/* 10PASS-TS/2BASE-TL */
+#define MDIO_CTRL1_SPEED10P2B		(MDIO_CTRL1_SPEEDSELEXT | 0x04)
+
+/* Status register 1. */
+#define MDIO_STAT1_LPOWERABLE		0x0002	/* Low-power ability */
+#define MDIO_STAT1_LSTATUS		BMSR_LSTATUS
+#define MDIO_STAT1_FAULT		0x0080	/* Fault */
+#define MDIO_AN_STAT1_LPABLE		0x0001	/* Link partner AN ability */
+#define MDIO_AN_STAT1_ABLE		BMSR_ANEGCAPABLE
+#define MDIO_AN_STAT1_RFAULT		BMSR_RFAULT
+#define MDIO_AN_STAT1_COMPLETE		BMSR_ANEGCOMPLETE
+#define MDIO_AN_STAT1_PAGE		0x0040	/* Page received */
+#define MDIO_AN_STAT1_XNP		0x0080	/* Extended next page status */
+
+/* Speed register. */
+#define MDIO_SPEED_10G			0x0001	/* 10G capable */
+#define MDIO_PMA_SPEED_2B		0x0002	/* 2BASE-TL capable */
+#define MDIO_PMA_SPEED_10P		0x0004	/* 10PASS-TS capable */
+#define MDIO_PMA_SPEED_1000		0x0010	/* 1000M capable */
+#define MDIO_PMA_SPEED_100		0x0020	/* 100M capable */
+#define MDIO_PMA_SPEED_10		0x0040	/* 10M capable */
+#define MDIO_PCS_SPEED_10P2B		0x0002	/* 10PASS-TS/2BASE-TL capable */
+
+/* Device present registers. */
+#define MDIO_DEVS_PRESENT(devad)	(1 << (devad))
+#define MDIO_DEVS_PMAPMD		MDIO_DEVS_PRESENT(MDIO_MMD_PMAPMD)
+#define MDIO_DEVS_WIS			MDIO_DEVS_PRESENT(MDIO_MMD_WIS)
+#define MDIO_DEVS_PCS			MDIO_DEVS_PRESENT(MDIO_MMD_PCS)
+#define MDIO_DEVS_PHYXS			MDIO_DEVS_PRESENT(MDIO_MMD_PHYXS)
+#define MDIO_DEVS_DTEXS			MDIO_DEVS_PRESENT(MDIO_MMD_DTEXS)
+#define MDIO_DEVS_TC			MDIO_DEVS_PRESENT(MDIO_MMD_TC)
+#define MDIO_DEVS_AN			MDIO_DEVS_PRESENT(MDIO_MMD_AN)
+#define MDIO_DEVS_C22EXT		MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT)
+
+/* Control register 2. */
+#define MDIO_PMA_CTRL2_TYPE		0x000f	/* PMA/PMD type selection */
+#define MDIO_PMA_CTRL2_10GBCX4		0x0000	/* 10GBASE-CX4 type */
+#define MDIO_PMA_CTRL2_10GBEW		0x0001	/* 10GBASE-EW type */
+#define MDIO_PMA_CTRL2_10GBLW		0x0002	/* 10GBASE-LW type */
+#define MDIO_PMA_CTRL2_10GBSW		0x0003	/* 10GBASE-SW type */
+#define MDIO_PMA_CTRL2_10GBLX4		0x0004	/* 10GBASE-LX4 type */
+#define MDIO_PMA_CTRL2_10GBER		0x0005	/* 10GBASE-ER type */
+#define MDIO_PMA_CTRL2_10GBLR		0x0006	/* 10GBASE-LR type */
+#define MDIO_PMA_CTRL2_10GBSR		0x0007	/* 10GBASE-SR type */
+#define MDIO_PMA_CTRL2_10GBLRM		0x0008	/* 10GBASE-LRM type */
+#define MDIO_PMA_CTRL2_10GBT		0x0009	/* 10GBASE-T type */
+#define MDIO_PMA_CTRL2_10GBKX4		0x000a	/* 10GBASE-KX4 type */
+#define MDIO_PMA_CTRL2_10GBKR		0x000b	/* 10GBASE-KR type */
+#define MDIO_PMA_CTRL2_1000BT		0x000c	/* 1000BASE-T type */
+#define MDIO_PMA_CTRL2_1000BKX		0x000d	/* 1000BASE-KX type */
+#define MDIO_PMA_CTRL2_100BTX		0x000e	/* 100BASE-TX type */
+#define MDIO_PMA_CTRL2_10BT		0x000f	/* 10BASE-T type */
+#define MDIO_PCS_CTRL2_TYPE		0x0003	/* PCS type selection */
+#define MDIO_PCS_CTRL2_10GBR		0x0000	/* 10GBASE-R type */
+#define MDIO_PCS_CTRL2_10GBX		0x0001	/* 10GBASE-X type */
+#define MDIO_PCS_CTRL2_10GBW		0x0002	/* 10GBASE-W type */
+#define MDIO_PCS_CTRL2_10GBT		0x0003	/* 10GBASE-T type */
+
+/* Status register 2. */
+#define MDIO_STAT2_RXFAULT		0x0400	/* Receive fault */
+#define MDIO_STAT2_TXFAULT		0x0800	/* Transmit fault */
+#define MDIO_STAT2_DEVPRST		0xc000	/* Device present */
+#define MDIO_STAT2_DEVPRST_VAL		0x8000	/* Device present value */
+#define MDIO_PMA_STAT2_LBABLE		0x0001	/* PMA loopback ability */
+#define MDIO_PMA_STAT2_10GBEW		0x0002	/* 10GBASE-EW ability */
+#define MDIO_PMA_STAT2_10GBLW		0x0004	/* 10GBASE-LW ability */
+#define MDIO_PMA_STAT2_10GBSW		0x0008	/* 10GBASE-SW ability */
+#define MDIO_PMA_STAT2_10GBLX4		0x0010	/* 10GBASE-LX4 ability */
+#define MDIO_PMA_STAT2_10GBER		0x0020	/* 10GBASE-ER ability */
+#define MDIO_PMA_STAT2_10GBLR		0x0040	/* 10GBASE-LR ability */
+#define MDIO_PMA_STAT2_10GBSR		0x0080	/* 10GBASE-SR ability */
+#define MDIO_PMD_STAT2_TXDISAB		0x0100	/* PMD TX disable ability */
+#define MDIO_PMA_STAT2_EXTABLE		0x0200	/* Extended abilities */
+#define MDIO_PMA_STAT2_RXFLTABLE	0x1000	/* Receive fault ability */
+#define MDIO_PMA_STAT2_TXFLTABLE	0x2000	/* Transmit fault ability */
+#define MDIO_PCS_STAT2_10GBR		0x0001	/* 10GBASE-R capable */
+#define MDIO_PCS_STAT2_10GBX		0x0002	/* 10GBASE-X capable */
+#define MDIO_PCS_STAT2_10GBW		0x0004	/* 10GBASE-W capable */
+#define MDIO_PCS_STAT2_RXFLTABLE	0x1000	/* Receive fault ability */
+#define MDIO_PCS_STAT2_TXFLTABLE	0x2000	/* Transmit fault ability */
+
+/* Transmit disable register. */
+#define MDIO_PMD_TXDIS_GLOBAL		0x0001	/* Global PMD TX disable */
+#define MDIO_PMD_TXDIS_0		0x0002	/* PMD TX disable 0 */
+#define MDIO_PMD_TXDIS_1		0x0004	/* PMD TX disable 1 */
+#define MDIO_PMD_TXDIS_2		0x0008	/* PMD TX disable 2 */
+#define MDIO_PMD_TXDIS_3		0x0010	/* PMD TX disable 3 */
+
+/* Receive signal detect register. */
+#define MDIO_PMD_RXDET_GLOBAL		0x0001	/* Global PMD RX signal detect */
+#define MDIO_PMD_RXDET_0		0x0002	/* PMD RX signal detect 0 */
+#define MDIO_PMD_RXDET_1		0x0004	/* PMD RX signal detect 1 */
+#define MDIO_PMD_RXDET_2		0x0008	/* PMD RX signal detect 2 */
+#define MDIO_PMD_RXDET_3		0x0010	/* PMD RX signal detect 3 */
+
+/* Extended abilities register. */
+#define MDIO_PMA_EXTABLE_10GCX4		0x0001	/* 10GBASE-CX4 ability */
+#define MDIO_PMA_EXTABLE_10GBLRM	0x0002	/* 10GBASE-LRM ability */
+#define MDIO_PMA_EXTABLE_10GBT		0x0004	/* 10GBASE-T ability */
+#define MDIO_PMA_EXTABLE_10GBKX4	0x0008	/* 10GBASE-KX4 ability */
+#define MDIO_PMA_EXTABLE_10GBKR		0x0010	/* 10GBASE-KR ability */
+#define MDIO_PMA_EXTABLE_1000BT		0x0020	/* 1000BASE-T ability */
+#define MDIO_PMA_EXTABLE_1000BKX	0x0040	/* 1000BASE-KX ability */
+#define MDIO_PMA_EXTABLE_100BTX		0x0080	/* 100BASE-TX ability */
+#define MDIO_PMA_EXTABLE_10BT		0x0100	/* 10BASE-T ability */
+
+/* PHY XGXS lane state register. */
+#define MDIO_PHYXS_LNSTAT_SYNC0		0x0001
+#define MDIO_PHYXS_LNSTAT_SYNC1		0x0002
+#define MDIO_PHYXS_LNSTAT_SYNC2		0x0004
+#define MDIO_PHYXS_LNSTAT_SYNC3		0x0008
+#define MDIO_PHYXS_LNSTAT_ALIGN		0x1000
+
+/* PMA 10GBASE-T pair swap & polarity */
+#define MDIO_PMA_10GBT_SWAPPOL_ABNX	0x0001	/* Pair A/B uncrossed */
+#define MDIO_PMA_10GBT_SWAPPOL_CDNX	0x0002	/* Pair C/D uncrossed */
+#define MDIO_PMA_10GBT_SWAPPOL_AREV	0x0100	/* Pair A polarity reversed */
+#define MDIO_PMA_10GBT_SWAPPOL_BREV	0x0200	/* Pair B polarity reversed */
+#define MDIO_PMA_10GBT_SWAPPOL_CREV	0x0400	/* Pair C polarity reversed */
+#define MDIO_PMA_10GBT_SWAPPOL_DREV	0x0800	/* Pair D polarity reversed */
+
+/* PMA 10GBASE-T TX power register. */
+#define MDIO_PMA_10GBT_TXPWR_SHORT	0x0001	/* Short-reach mode */
+
+/* PMA 10GBASE-T SNR registers. */
+/* Value is SNR margin in dB, clamped to range [-127, 127], plus 0x8000. */
+#define MDIO_PMA_10GBT_SNR_BIAS		0x8000
+#define MDIO_PMA_10GBT_SNR_MAX		127
+
+/* PMA 10GBASE-R FEC ability register. */
+#define MDIO_PMA_10GBR_FECABLE_ABLE	0x0001	/* FEC ability */
+#define MDIO_PMA_10GBR_FECABLE_ERRABLE	0x0002	/* FEC error indic. ability */
+
+/* PCS 10GBASE-R/-T status register 1. */
+#define MDIO_PCS_10GBRT_STAT1_BLKLK	0x0001	/* Block lock attained */
+
+/* PCS 10GBASE-R/-T status register 2. */
+#define MDIO_PCS_10GBRT_STAT2_ERR	0x00ff
+#define MDIO_PCS_10GBRT_STAT2_BER	0x3f00
+
+/* AN 10GBASE-T control register. */
+#define MDIO_AN_10GBT_CTRL_ADV10G	0x1000	/* Advertise 10GBASE-T */
+
+/* AN 10GBASE-T status register. */
+#define MDIO_AN_10GBT_STAT_LPTRR	0x0200	/* LP training reset req. */
+#define MDIO_AN_10GBT_STAT_LPLTABLE	0x0400	/* LP loop timing ability */
+#define MDIO_AN_10GBT_STAT_LP10G	0x0800	/* LP is 10GBT capable */
+#define MDIO_AN_10GBT_STAT_REMOK	0x1000	/* Remote OK */
+#define MDIO_AN_10GBT_STAT_LOCOK	0x2000	/* Local OK */
+#define MDIO_AN_10GBT_STAT_MS		0x4000	/* Master/slave config */
+#define MDIO_AN_10GBT_STAT_MSFLT	0x8000	/* Master/slave config fault */
+
+/* EEE Supported/Advertisement/LP Advertisement registers.
+ *
+ * EEE capability Register (3.20), Advertisement (7.60) and
+ * Link partner ability (7.61) registers have and can use the same identical
+ * bit masks.
+ */
+#define MDIO_AN_EEE_ADV_100TX	0x0002	/* Advertise 100TX EEE cap */
+#define MDIO_AN_EEE_ADV_1000T	0x0004	/* Advertise 1000T EEE cap */
+/* Note: the two defines above can be potentially used by the user-land
+ * and cannot remove them now.
+ * So, we define the new generic MDIO_EEE_100TX and MDIO_EEE_1000T macros
+ * using the previous ones (that can be considered obsolete).
+ */
+#define MDIO_EEE_100TX		MDIO_AN_EEE_ADV_100TX	/* 100TX EEE cap */
+#define MDIO_EEE_1000T		MDIO_AN_EEE_ADV_1000T	/* 1000T EEE cap */
+#define MDIO_EEE_10GT		0x0008	/* 10GT EEE cap */
+#define MDIO_EEE_1000KX		0x0010	/* 1000KX EEE cap */
+#define MDIO_EEE_10GKX4		0x0020	/* 10G KX4 EEE cap */
+#define MDIO_EEE_10GKR		0x0040	/* 10G KR EEE cap */
+
+/* LASI RX_ALARM control/status registers. */
+#define MDIO_PMA_LASI_RX_PHYXSLFLT	0x0001	/* PHY XS RX local fault */
+#define MDIO_PMA_LASI_RX_PCSLFLT	0x0008	/* PCS RX local fault */
+#define MDIO_PMA_LASI_RX_PMALFLT	0x0010	/* PMA/PMD RX local fault */
+#define MDIO_PMA_LASI_RX_OPTICPOWERFLT	0x0020	/* RX optical power fault */
+#define MDIO_PMA_LASI_RX_WISLFLT	0x0200	/* WIS local fault */
+
+/* LASI TX_ALARM control/status registers. */
+#define MDIO_PMA_LASI_TX_PHYXSLFLT	0x0001	/* PHY XS TX local fault */
+#define MDIO_PMA_LASI_TX_PCSLFLT	0x0008	/* PCS TX local fault */
+#define MDIO_PMA_LASI_TX_PMALFLT	0x0010	/* PMA/PMD TX local fault */
+#define MDIO_PMA_LASI_TX_LASERPOWERFLT	0x0080	/* Laser output power fault */
+#define MDIO_PMA_LASI_TX_LASERTEMPFLT	0x0100	/* Laser temperature fault */
+#define MDIO_PMA_LASI_TX_LASERBICURRFLT	0x0200	/* Laser bias current fault */
+
+/* LASI control/status registers. */
+#define MDIO_PMA_LASI_LSALARM		0x0001	/* LS_ALARM enable/status */
+#define MDIO_PMA_LASI_TXALARM		0x0002	/* TX_ALARM enable/status */
+#define MDIO_PMA_LASI_RXALARM		0x0004	/* RX_ALARM enable/status */
+
+/* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */
+
+#define MDIO_PHY_ID_C45			0x8000
+#define MDIO_PHY_ID_PRTAD		0x03e0
+#define MDIO_PHY_ID_DEVAD		0x001f
+#define MDIO_PHY_ID_C45_MASK						\
+	(MDIO_PHY_ID_C45 | MDIO_PHY_ID_PRTAD | MDIO_PHY_ID_DEVAD)
+
+static inline __u16 mdio_phy_id_c45(int prtad, int devad)
+{
+	return MDIO_PHY_ID_C45 | (prtad << 5) | devad;
+}
+
+#endif /* _UAPI__LINUX_MDIO_H__ */
diff --git a/include/uapi/linux/media.h b/include/uapi/linux/media.h
new file mode 100644
index 00000000000..0ef883327de
--- /dev/null
+++ b/include/uapi/linux/media.h
@@ -0,0 +1,132 @@
+/*
+ * Multimedia device API
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __LINUX_MEDIA_H
+#define __LINUX_MEDIA_H
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+#include <linux/version.h>
+
+#define MEDIA_API_VERSION	KERNEL_VERSION(0, 1, 0)
+
+struct media_device_info {
+	char driver[16];
+	char model[32];
+	char serial[40];
+	char bus_info[32];
+	__u32 media_version;
+	__u32 hw_revision;
+	__u32 driver_version;
+	__u32 reserved[31];
+};
+
+#define MEDIA_ENT_ID_FLAG_NEXT		(1 << 31)
+
+#define MEDIA_ENT_TYPE_SHIFT		16
+#define MEDIA_ENT_TYPE_MASK		0x00ff0000
+#define MEDIA_ENT_SUBTYPE_MASK		0x0000ffff
+
+#define MEDIA_ENT_T_DEVNODE		(1 << MEDIA_ENT_TYPE_SHIFT)
+#define MEDIA_ENT_T_DEVNODE_V4L		(MEDIA_ENT_T_DEVNODE + 1)
+#define MEDIA_ENT_T_DEVNODE_FB		(MEDIA_ENT_T_DEVNODE + 2)
+#define MEDIA_ENT_T_DEVNODE_ALSA	(MEDIA_ENT_T_DEVNODE + 3)
+#define MEDIA_ENT_T_DEVNODE_DVB		(MEDIA_ENT_T_DEVNODE + 4)
+
+#define MEDIA_ENT_T_V4L2_SUBDEV		(2 << MEDIA_ENT_TYPE_SHIFT)
+#define MEDIA_ENT_T_V4L2_SUBDEV_SENSOR	(MEDIA_ENT_T_V4L2_SUBDEV + 1)
+#define MEDIA_ENT_T_V4L2_SUBDEV_FLASH	(MEDIA_ENT_T_V4L2_SUBDEV + 2)
+#define MEDIA_ENT_T_V4L2_SUBDEV_LENS	(MEDIA_ENT_T_V4L2_SUBDEV + 3)
+
+#define MEDIA_ENT_FL_DEFAULT		(1 << 0)
+
+struct media_entity_desc {
+	__u32 id;
+	char name[32];
+	__u32 type;
+	__u32 revision;
+	__u32 flags;
+	__u32 group_id;
+	__u16 pads;
+	__u16 links;
+
+	__u32 reserved[4];
+
+	union {
+		/* Node specifications */
+		struct {
+			__u32 major;
+			__u32 minor;
+		} v4l;
+		struct {
+			__u32 major;
+			__u32 minor;
+		} fb;
+		struct {
+			__u32 card;
+			__u32 device;
+			__u32 subdevice;
+		} alsa;
+		int dvb;
+
+		/* Sub-device specifications */
+		/* Nothing needed yet */
+		__u8 raw[184];
+	};
+};
+
+#define MEDIA_PAD_FL_SINK		(1 << 0)
+#define MEDIA_PAD_FL_SOURCE		(1 << 1)
+
+struct media_pad_desc {
+	__u32 entity;		/* entity ID */
+	__u16 index;		/* pad index */
+	__u32 flags;		/* pad flags */
+	__u32 reserved[2];
+};
+
+#define MEDIA_LNK_FL_ENABLED		(1 << 0)
+#define MEDIA_LNK_FL_IMMUTABLE		(1 << 1)
+#define MEDIA_LNK_FL_DYNAMIC		(1 << 2)
+
+struct media_link_desc {
+	struct media_pad_desc source;
+	struct media_pad_desc sink;
+	__u32 flags;
+	__u32 reserved[2];
+};
+
+struct media_links_enum {
+	__u32 entity;
+	/* Should have enough room for pads elements */
+	struct media_pad_desc __user *pads;
+	/* Should have enough room for links elements */
+	struct media_link_desc __user *links;
+	__u32 reserved[4];
+};
+
+#define MEDIA_IOC_DEVICE_INFO		_IOWR('|', 0x00, struct media_device_info)
+#define MEDIA_IOC_ENUM_ENTITIES		_IOWR('|', 0x01, struct media_entity_desc)
+#define MEDIA_IOC_ENUM_LINKS		_IOWR('|', 0x02, struct media_links_enum)
+#define MEDIA_IOC_SETUP_LINK		_IOWR('|', 0x03, struct media_link_desc)
+
+#endif /* __LINUX_MEDIA_H */
diff --git a/include/uapi/linux/mei.h b/include/uapi/linux/mei.h
new file mode 100644
index 00000000000..bc0d8b69c49
--- /dev/null
+++ b/include/uapi/linux/mei.h
@@ -0,0 +1,110 @@
+/******************************************************************************
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Intel MEI Interface Header
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ *	Intel Corporation.
+ *	linux-mei@linux.intel.com
+ *	http://www.intel.com
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *  * Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  * Neither the name Intel Corporation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+
+#ifndef _LINUX_MEI_H
+#define _LINUX_MEI_H
+
+#include <linux/uuid.h>
+
+/*
+ * This IOCTL is used to associate the current file descriptor with a
+ * FW Client (given by UUID). This opens a communication channel
+ * between a host client and a FW client. From this point every read and write
+ * will communicate with the associated FW client.
+ * Only in close() (file_operation release()) the communication between
+ * the clients is disconnected
+ *
+ * The IOCTL argument is a struct with a union that contains
+ * the input parameter and the output parameter for this IOCTL.
+ *
+ * The input parameter is UUID of the FW Client.
+ * The output parameter is the properties of the FW client
+ * (FW protocol version and max message size).
+ *
+ */
+#define IOCTL_MEI_CONNECT_CLIENT \
+	_IOWR('H' , 0x01, struct mei_connect_client_data)
+
+/*
+ * Intel MEI client information struct
+ */
+struct mei_client {
+	__u32 max_msg_length;
+	__u8 protocol_version;
+	__u8 reserved[3];
+};
+
+/*
+ * IOCTL Connect Client Data structure
+ */
+struct mei_connect_client_data {
+	union {
+		uuid_le in_client_uuid;
+		struct mei_client out_client_properties;
+	};
+};
+
+#endif /* _LINUX_MEI_H  */
diff --git a/include/uapi/linux/mempolicy.h b/include/uapi/linux/mempolicy.h
new file mode 100644
index 00000000000..23e62e0537e
--- /dev/null
+++ b/include/uapi/linux/mempolicy.h
@@ -0,0 +1,64 @@
+/*
+ * NUMA memory policies for Linux.
+ * Copyright 2003,2004 Andi Kleen SuSE Labs
+ */
+#ifndef _UAPI_LINUX_MEMPOLICY_H
+#define _UAPI_LINUX_MEMPOLICY_H
+
+#include <linux/errno.h>
+
+
+/*
+ * Both the MPOL_* mempolicy mode and the MPOL_F_* optional mode flags are
+ * passed by the user to either set_mempolicy() or mbind() in an 'int' actual.
+ * The MPOL_MODE_FLAGS macro determines the legal set of optional mode flags.
+ */
+
+/* Policies */
+enum {
+	MPOL_DEFAULT,
+	MPOL_PREFERRED,
+	MPOL_BIND,
+	MPOL_INTERLEAVE,
+	MPOL_MAX,	/* always last member of enum */
+};
+
+enum mpol_rebind_step {
+	MPOL_REBIND_ONCE,	/* do rebind work at once(not by two step) */
+	MPOL_REBIND_STEP1,	/* first step(set all the newly nodes) */
+	MPOL_REBIND_STEP2,	/* second step(clean all the disallowed nodes)*/
+	MPOL_REBIND_NSTEP,
+};
+
+/* Flags for set_mempolicy */
+#define MPOL_F_STATIC_NODES	(1 << 15)
+#define MPOL_F_RELATIVE_NODES	(1 << 14)
+
+/*
+ * MPOL_MODE_FLAGS is the union of all possible optional mode flags passed to
+ * either set_mempolicy() or mbind().
+ */
+#define MPOL_MODE_FLAGS	(MPOL_F_STATIC_NODES | MPOL_F_RELATIVE_NODES)
+
+/* Flags for get_mempolicy */
+#define MPOL_F_NODE	(1<<0)	/* return next IL mode instead of node mask */
+#define MPOL_F_ADDR	(1<<1)	/* look up vma using address */
+#define MPOL_F_MEMS_ALLOWED (1<<2) /* return allowed memories */
+
+/* Flags for mbind */
+#define MPOL_MF_STRICT	(1<<0)	/* Verify existing pages in the mapping */
+#define MPOL_MF_MOVE	(1<<1)	/* Move pages owned by this process to conform to mapping */
+#define MPOL_MF_MOVE_ALL (1<<2)	/* Move every page to conform to mapping */
+#define MPOL_MF_INTERNAL (1<<3)	/* Internal flags start here */
+
+/*
+ * Internal flags that share the struct mempolicy flags word with
+ * "mode flags".  These flags are allocated from bit 0 up, as they
+ * are never OR'ed into the mode in mempolicy API arguments.
+ */
+#define MPOL_F_SHARED  (1 << 0)	/* identify shared policies */
+#define MPOL_F_LOCAL   (1 << 1)	/* preferred local allocation */
+#define MPOL_F_REBINDING (1 << 2)	/* identify policies in rebinding */
+
+
+#endif /* _UAPI_LINUX_MEMPOLICY_H */
diff --git a/include/uapi/linux/meye.h b/include/uapi/linux/meye.h
new file mode 100644
index 00000000000..0dd49954f74
--- /dev/null
+++ b/include/uapi/linux/meye.h
@@ -0,0 +1,66 @@
+/*
+ * Motion Eye video4linux driver for Sony Vaio PictureBook
+ *
+ * Copyright (C) 2001-2003 Stelian Pop <stelian@popies.net>
+ *
+ * Copyright (C) 2001-2002 Alcôve <www.alcove.com>
+ *
+ * Copyright (C) 2000 Andrew Tridgell <tridge@valinux.com>
+ *
+ * Earlier work by Werner Almesberger, Paul `Rusty' Russell and Paul Mackerras.
+ *
+ * Some parts borrowed from various video4linux drivers, especially
+ * bttv-driver.c and zoran.c, see original files for credits.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _MEYE_H_
+#define _MEYE_H_
+
+/****************************************************************************/
+/* Private API for handling mjpeg capture / playback.                       */
+/****************************************************************************/
+
+struct meye_params {
+	unsigned char subsample;
+	unsigned char quality;
+	unsigned char sharpness;
+	unsigned char agc;
+	unsigned char picture;
+	unsigned char framerate;
+};
+
+/* query the extended parameters */
+#define MEYEIOC_G_PARAMS	_IOR ('v', BASE_VIDIOC_PRIVATE+0, struct meye_params)
+/* set the extended parameters */
+#define MEYEIOC_S_PARAMS	_IOW ('v', BASE_VIDIOC_PRIVATE+1, struct meye_params)
+/* queue a buffer for mjpeg capture */
+#define MEYEIOC_QBUF_CAPT	_IOW ('v', BASE_VIDIOC_PRIVATE+2, int)
+/* sync a previously queued mjpeg buffer */
+#define MEYEIOC_SYNC		_IOWR('v', BASE_VIDIOC_PRIVATE+3, int)
+/* get a still uncompressed snapshot */
+#define MEYEIOC_STILLCAPT	_IO  ('v', BASE_VIDIOC_PRIVATE+4)
+/* get a jpeg compressed snapshot */
+#define MEYEIOC_STILLJCAPT	_IOR ('v', BASE_VIDIOC_PRIVATE+5, int)
+
+/* V4L2 private controls */
+#define V4L2_CID_AGC		V4L2_CID_PRIVATE_BASE
+#define V4L2_CID_MEYE_SHARPNESS	(V4L2_CID_PRIVATE_BASE + 1)
+#define V4L2_CID_PICTURE	(V4L2_CID_PRIVATE_BASE + 2)
+#define V4L2_CID_JPEGQUAL	(V4L2_CID_PRIVATE_BASE + 3)
+#define V4L2_CID_FRAMERATE	(V4L2_CID_PRIVATE_BASE + 4)
+
+#endif
diff --git a/include/uapi/linux/mii.h b/include/uapi/linux/mii.h
new file mode 100644
index 00000000000..237fac4bc17
--- /dev/null
+++ b/include/uapi/linux/mii.h
@@ -0,0 +1,161 @@
+/*
+ * linux/mii.h: definitions for MII-compatible transceivers
+ * Originally drivers/net/sunhme.h.
+ *
+ * Copyright (C) 1996, 1999, 2001 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef _UAPI__LINUX_MII_H__
+#define _UAPI__LINUX_MII_H__
+
+#include <linux/types.h>
+#include <linux/ethtool.h>
+
+/* Generic MII registers. */
+#define MII_BMCR		0x00	/* Basic mode control register */
+#define MII_BMSR		0x01	/* Basic mode status register  */
+#define MII_PHYSID1		0x02	/* PHYS ID 1                   */
+#define MII_PHYSID2		0x03	/* PHYS ID 2                   */
+#define MII_ADVERTISE		0x04	/* Advertisement control reg   */
+#define MII_LPA			0x05	/* Link partner ability reg    */
+#define MII_EXPANSION		0x06	/* Expansion register          */
+#define MII_CTRL1000		0x09	/* 1000BASE-T control          */
+#define MII_STAT1000		0x0a	/* 1000BASE-T status           */
+#define	MII_MMD_CTRL		0x0d	/* MMD Access Control Register */
+#define	MII_MMD_DATA		0x0e	/* MMD Access Data Register */
+#define MII_ESTATUS		0x0f	/* Extended Status             */
+#define MII_DCOUNTER		0x12	/* Disconnect counter          */
+#define MII_FCSCOUNTER		0x13	/* False carrier counter       */
+#define MII_NWAYTEST		0x14	/* N-way auto-neg test reg     */
+#define MII_RERRCOUNTER		0x15	/* Receive error counter       */
+#define MII_SREVISION		0x16	/* Silicon revision            */
+#define MII_RESV1		0x17	/* Reserved...                 */
+#define MII_LBRERROR		0x18	/* Lpback, rx, bypass error    */
+#define MII_PHYADDR		0x19	/* PHY address                 */
+#define MII_RESV2		0x1a	/* Reserved...                 */
+#define MII_TPISTATUS		0x1b	/* TPI status for 10mbps       */
+#define MII_NCONFIG		0x1c	/* Network interface config    */
+
+/* Basic mode control register. */
+#define BMCR_RESV		0x003f	/* Unused...                   */
+#define BMCR_SPEED1000		0x0040	/* MSB of Speed (1000)         */
+#define BMCR_CTST		0x0080	/* Collision test              */
+#define BMCR_FULLDPLX		0x0100	/* Full duplex                 */
+#define BMCR_ANRESTART		0x0200	/* Auto negotiation restart    */
+#define BMCR_ISOLATE		0x0400	/* Isolate data paths from MII */
+#define BMCR_PDOWN		0x0800	/* Enable low power state      */
+#define BMCR_ANENABLE		0x1000	/* Enable auto negotiation     */
+#define BMCR_SPEED100		0x2000	/* Select 100Mbps              */
+#define BMCR_LOOPBACK		0x4000	/* TXD loopback bits           */
+#define BMCR_RESET		0x8000	/* Reset to default state      */
+
+/* Basic mode status register. */
+#define BMSR_ERCAP		0x0001	/* Ext-reg capability          */
+#define BMSR_JCD		0x0002	/* Jabber detected             */
+#define BMSR_LSTATUS		0x0004	/* Link status                 */
+#define BMSR_ANEGCAPABLE	0x0008	/* Able to do auto-negotiation */
+#define BMSR_RFAULT		0x0010	/* Remote fault detected       */
+#define BMSR_ANEGCOMPLETE	0x0020	/* Auto-negotiation complete   */
+#define BMSR_RESV		0x00c0	/* Unused...                   */
+#define BMSR_ESTATEN		0x0100	/* Extended Status in R15      */
+#define BMSR_100HALF2		0x0200	/* Can do 100BASE-T2 HDX       */
+#define BMSR_100FULL2		0x0400	/* Can do 100BASE-T2 FDX       */
+#define BMSR_10HALF		0x0800	/* Can do 10mbps, half-duplex  */
+#define BMSR_10FULL		0x1000	/* Can do 10mbps, full-duplex  */
+#define BMSR_100HALF		0x2000	/* Can do 100mbps, half-duplex */
+#define BMSR_100FULL		0x4000	/* Can do 100mbps, full-duplex */
+#define BMSR_100BASE4		0x8000	/* Can do 100mbps, 4k packets  */
+
+/* Advertisement control register. */
+#define ADVERTISE_SLCT		0x001f	/* Selector bits               */
+#define ADVERTISE_CSMA		0x0001	/* Only selector supported     */
+#define ADVERTISE_10HALF	0x0020	/* Try for 10mbps half-duplex  */
+#define ADVERTISE_1000XFULL	0x0020	/* Try for 1000BASE-X full-duplex */
+#define ADVERTISE_10FULL	0x0040	/* Try for 10mbps full-duplex  */
+#define ADVERTISE_1000XHALF	0x0040	/* Try for 1000BASE-X half-duplex */
+#define ADVERTISE_100HALF	0x0080	/* Try for 100mbps half-duplex */
+#define ADVERTISE_1000XPAUSE	0x0080	/* Try for 1000BASE-X pause    */
+#define ADVERTISE_100FULL	0x0100	/* Try for 100mbps full-duplex */
+#define ADVERTISE_1000XPSE_ASYM	0x0100	/* Try for 1000BASE-X asym pause */
+#define ADVERTISE_100BASE4	0x0200	/* Try for 100mbps 4k packets  */
+#define ADVERTISE_PAUSE_CAP	0x0400	/* Try for pause               */
+#define ADVERTISE_PAUSE_ASYM	0x0800	/* Try for asymetric pause     */
+#define ADVERTISE_RESV		0x1000	/* Unused...                   */
+#define ADVERTISE_RFAULT	0x2000	/* Say we can detect faults    */
+#define ADVERTISE_LPACK		0x4000	/* Ack link partners response  */
+#define ADVERTISE_NPAGE		0x8000	/* Next page bit               */
+
+#define ADVERTISE_FULL		(ADVERTISE_100FULL | ADVERTISE_10FULL | \
+				  ADVERTISE_CSMA)
+#define ADVERTISE_ALL		(ADVERTISE_10HALF | ADVERTISE_10FULL | \
+				  ADVERTISE_100HALF | ADVERTISE_100FULL)
+
+/* Link partner ability register. */
+#define LPA_SLCT		0x001f	/* Same as advertise selector  */
+#define LPA_10HALF		0x0020	/* Can do 10mbps half-duplex   */
+#define LPA_1000XFULL		0x0020	/* Can do 1000BASE-X full-duplex */
+#define LPA_10FULL		0x0040	/* Can do 10mbps full-duplex   */
+#define LPA_1000XHALF		0x0040	/* Can do 1000BASE-X half-duplex */
+#define LPA_100HALF		0x0080	/* Can do 100mbps half-duplex  */
+#define LPA_1000XPAUSE		0x0080	/* Can do 1000BASE-X pause     */
+#define LPA_100FULL		0x0100	/* Can do 100mbps full-duplex  */
+#define LPA_1000XPAUSE_ASYM	0x0100	/* Can do 1000BASE-X pause asym*/
+#define LPA_100BASE4		0x0200	/* Can do 100mbps 4k packets   */
+#define LPA_PAUSE_CAP		0x0400	/* Can pause                   */
+#define LPA_PAUSE_ASYM		0x0800	/* Can pause asymetrically     */
+#define LPA_RESV		0x1000	/* Unused...                   */
+#define LPA_RFAULT		0x2000	/* Link partner faulted        */
+#define LPA_LPACK		0x4000	/* Link partner acked us       */
+#define LPA_NPAGE		0x8000	/* Next page bit               */
+
+#define LPA_DUPLEX		(LPA_10FULL | LPA_100FULL)
+#define LPA_100			(LPA_100FULL | LPA_100HALF | LPA_100BASE4)
+
+/* Expansion register for auto-negotiation. */
+#define EXPANSION_NWAY		0x0001	/* Can do N-way auto-nego      */
+#define EXPANSION_LCWP		0x0002	/* Got new RX page code word   */
+#define EXPANSION_ENABLENPAGE	0x0004	/* This enables npage words    */
+#define EXPANSION_NPCAPABLE	0x0008	/* Link partner supports npage */
+#define EXPANSION_MFAULTS	0x0010	/* Multiple faults detected    */
+#define EXPANSION_RESV		0xffe0	/* Unused...                   */
+
+#define ESTATUS_1000_TFULL	0x2000	/* Can do 1000BT Full          */
+#define ESTATUS_1000_THALF	0x1000	/* Can do 1000BT Half          */
+
+/* N-way test register. */
+#define NWAYTEST_RESV1		0x00ff	/* Unused...                   */
+#define NWAYTEST_LOOPBACK	0x0100	/* Enable loopback for N-way   */
+#define NWAYTEST_RESV2		0xfe00	/* Unused...                   */
+
+/* 1000BASE-T Control register */
+#define ADVERTISE_1000FULL	0x0200  /* Advertise 1000BASE-T full duplex */
+#define ADVERTISE_1000HALF	0x0100  /* Advertise 1000BASE-T half duplex */
+#define CTL1000_AS_MASTER	0x0800
+#define CTL1000_ENABLE_MASTER	0x1000
+
+/* 1000BASE-T Status register */
+#define LPA_1000LOCALRXOK	0x2000	/* Link partner local receiver status */
+#define LPA_1000REMRXOK		0x1000	/* Link partner remote receiver status */
+#define LPA_1000FULL		0x0800	/* Link partner 1000BASE-T full duplex */
+#define LPA_1000HALF		0x0400	/* Link partner 1000BASE-T half duplex */
+
+/* Flow control flags */
+#define FLOW_CTRL_TX		0x01
+#define FLOW_CTRL_RX		0x02
+
+/* MMD Access Control register fields */
+#define MII_MMD_CTRL_DEVAD_MASK	0x1f	/* Mask MMD DEVAD*/
+#define MII_MMD_CTRL_ADDR	0x0000	/* Address */
+#define MII_MMD_CTRL_NOINCR	0x4000	/* no post increment */
+#define MII_MMD_CTRL_INCR_RDWT	0x8000	/* post increment on reads & writes */
+#define MII_MMD_CTRL_INCR_ON_WT	0xC000	/* post increment on writes only */
+
+/* This structure is used in all SIOCxMIIxxx ioctl calls */
+struct mii_ioctl_data {
+	__u16		phy_id;
+	__u16		reg_num;
+	__u16		val_in;
+	__u16		val_out;
+};
+
+#endif /* _UAPI__LINUX_MII_H__ */
diff --git a/include/uapi/linux/minix_fs.h b/include/uapi/linux/minix_fs.h
new file mode 100644
index 00000000000..13fe09e0576
--- /dev/null
+++ b/include/uapi/linux/minix_fs.h
@@ -0,0 +1,106 @@
+#ifndef _LINUX_MINIX_FS_H
+#define _LINUX_MINIX_FS_H
+
+#include <linux/types.h>
+#include <linux/magic.h>
+
+/*
+ * The minix filesystem constants/structures
+ */
+
+/*
+ * Thanks to Kees J Bot for sending me the definitions of the new
+ * minix filesystem (aka V2) with bigger inodes and 32-bit block
+ * pointers.
+ */
+
+#define MINIX_ROOT_INO 1
+
+/* Not the same as the bogus LINK_MAX in <linux/limits.h>. Oh well. */
+#define MINIX_LINK_MAX	250
+#define MINIX2_LINK_MAX	65530
+
+#define MINIX_I_MAP_SLOTS	8
+#define MINIX_Z_MAP_SLOTS	64
+#define MINIX_VALID_FS		0x0001		/* Clean fs. */
+#define MINIX_ERROR_FS		0x0002		/* fs has errors. */
+
+#define MINIX_INODES_PER_BLOCK ((BLOCK_SIZE)/(sizeof (struct minix_inode)))
+
+/*
+ * This is the original minix inode layout on disk.
+ * Note the 8-bit gid and atime and ctime.
+ */
+struct minix_inode {
+	__u16 i_mode;
+	__u16 i_uid;
+	__u32 i_size;
+	__u32 i_time;
+	__u8  i_gid;
+	__u8  i_nlinks;
+	__u16 i_zone[9];
+};
+
+/*
+ * The new minix inode has all the time entries, as well as
+ * long block numbers and a third indirect block (7+1+1+1
+ * instead of 7+1+1). Also, some previously 8-bit values are
+ * now 16-bit. The inode is now 64 bytes instead of 32.
+ */
+struct minix2_inode {
+	__u16 i_mode;
+	__u16 i_nlinks;
+	__u16 i_uid;
+	__u16 i_gid;
+	__u32 i_size;
+	__u32 i_atime;
+	__u32 i_mtime;
+	__u32 i_ctime;
+	__u32 i_zone[10];
+};
+
+/*
+ * minix super-block data on disk
+ */
+struct minix_super_block {
+	__u16 s_ninodes;
+	__u16 s_nzones;
+	__u16 s_imap_blocks;
+	__u16 s_zmap_blocks;
+	__u16 s_firstdatazone;
+	__u16 s_log_zone_size;
+	__u32 s_max_size;
+	__u16 s_magic;
+	__u16 s_state;
+	__u32 s_zones;
+};
+
+/*
+ * V3 minix super-block data on disk
+ */
+struct minix3_super_block {
+	__u32 s_ninodes;
+	__u16 s_pad0;
+	__u16 s_imap_blocks;
+	__u16 s_zmap_blocks;
+	__u16 s_firstdatazone;
+	__u16 s_log_zone_size;
+	__u16 s_pad1;
+	__u32 s_max_size;
+	__u32 s_zones;
+	__u16 s_magic;
+	__u16 s_pad2;
+	__u16 s_blocksize;
+	__u8  s_disk_version;
+};
+
+struct minix_dir_entry {
+	__u16 inode;
+	char name[0];
+};
+
+struct minix3_dir_entry {
+	__u32 inode;
+	char name[0];
+};
+#endif
diff --git a/include/uapi/linux/mman.h b/include/uapi/linux/mman.h
new file mode 100644
index 00000000000..ade4acd3a90
--- /dev/null
+++ b/include/uapi/linux/mman.h
@@ -0,0 +1,13 @@
+#ifndef _UAPI_LINUX_MMAN_H
+#define _UAPI_LINUX_MMAN_H
+
+#include <asm/mman.h>
+
+#define MREMAP_MAYMOVE	1
+#define MREMAP_FIXED	2
+
+#define OVERCOMMIT_GUESS		0
+#define OVERCOMMIT_ALWAYS		1
+#define OVERCOMMIT_NEVER		2
+
+#endif /* _UAPI_LINUX_MMAN_H */
diff --git a/include/uapi/linux/mmtimer.h b/include/uapi/linux/mmtimer.h
new file mode 100644
index 00000000000..884cabf1608
--- /dev/null
+++ b/include/uapi/linux/mmtimer.h
@@ -0,0 +1,56 @@
+/*
+ * Intel Multimedia Timer device interface
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2001-2004 Silicon Graphics, Inc.  All rights reserved.
+ *
+ * This file should define an interface compatible with the IA-PC Multimedia
+ * Timers Draft Specification (rev. 0.97) from Intel.  Note that some
+ * hardware may not be able to safely export its registers to userspace,
+ * so the ioctl interface should support all necessary functionality.
+ *
+ * 11/01/01 - jbarnes - initial revision
+ * 9/10/04 - Christoph Lameter - remove interrupt support
+ * 9/17/04 - jbarnes - remove test program, move some #defines to the driver
+ */
+
+#ifndef _LINUX_MMTIMER_H
+#define _LINUX_MMTIMER_H
+
+/*
+ * Breakdown of the ioctl's available.  An 'optional' next to the command
+ * indicates that supporting this command is optional, while 'required'
+ * commands must be implemented if conformance is desired.
+ *
+ * MMTIMER_GETOFFSET - optional
+ *   Should return the offset (relative to the start of the page where the
+ *   registers are mapped) for the counter in question.
+ *
+ * MMTIMER_GETRES - required
+ *   The resolution of the clock in femto (10^-15) seconds
+ *
+ * MMTIMER_GETFREQ - required
+ *   Frequency of the clock in Hz
+ *
+ * MMTIMER_GETBITS - required
+ *   Number of bits in the clock's counter
+ *
+ * MMTIMER_MMAPAVAIL - required
+ *   Returns nonzero if the registers can be mmap'd into userspace, 0 otherwise
+ *
+ * MMTIMER_GETCOUNTER - required
+ *   Gets the current value in the counter
+ */
+#define MMTIMER_IOCTL_BASE 'm'
+
+#define MMTIMER_GETOFFSET _IO(MMTIMER_IOCTL_BASE, 0)
+#define MMTIMER_GETRES _IOR(MMTIMER_IOCTL_BASE, 1, unsigned long)
+#define MMTIMER_GETFREQ _IOR(MMTIMER_IOCTL_BASE, 2, unsigned long)
+#define MMTIMER_GETBITS _IO(MMTIMER_IOCTL_BASE, 4)
+#define MMTIMER_MMAPAVAIL _IO(MMTIMER_IOCTL_BASE, 6)
+#define MMTIMER_GETCOUNTER _IOR(MMTIMER_IOCTL_BASE, 9, unsigned long)
+
+#endif /* _LINUX_MMTIMER_H */
diff --git a/include/uapi/linux/mqueue.h b/include/uapi/linux/mqueue.h
new file mode 100644
index 00000000000..8b5a79615fb
--- /dev/null
+++ b/include/uapi/linux/mqueue.h
@@ -0,0 +1,53 @@
+/* Copyright (C) 2003 Krzysztof Benedyczak & Michal Wronski
+
+   This program is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   It is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with this software; if not, write to the Free
+   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+   02111-1307 USA.  */
+
+#ifndef _LINUX_MQUEUE_H
+#define _LINUX_MQUEUE_H
+
+#define MQ_PRIO_MAX 	32768
+/* per-uid limit of kernel memory used by mqueue, in bytes */
+#define MQ_BYTES_MAX	819200
+
+struct mq_attr {
+	long	mq_flags;	/* message queue flags			*/
+	long	mq_maxmsg;	/* maximum number of messages		*/
+	long	mq_msgsize;	/* maximum message size			*/
+	long	mq_curmsgs;	/* number of messages currently queued	*/
+	long	__reserved[4];	/* ignored for input, zeroed for output */
+};
+
+/*
+ * SIGEV_THREAD implementation:
+ * SIGEV_THREAD must be implemented in user space. If SIGEV_THREAD is passed
+ * to mq_notify, then
+ * - sigev_signo must be the file descriptor of an AF_NETLINK socket. It's not
+ *   necessary that the socket is bound.
+ * - sigev_value.sival_ptr must point to a cookie that is NOTIFY_COOKIE_LEN
+ *   bytes long.
+ * If the notification is triggered, then the cookie is sent to the netlink
+ * socket. The last byte of the cookie is replaced with the NOTIFY_?? codes:
+ * NOTIFY_WOKENUP if the notification got triggered, NOTIFY_REMOVED if it was
+ * removed, either due to a close() on the message queue fd or due to a
+ * mq_notify() that removed the notification.
+ */
+#define NOTIFY_NONE	0
+#define NOTIFY_WOKENUP	1
+#define NOTIFY_REMOVED	2
+
+#define NOTIFY_COOKIE_LEN	32
+
+#endif
diff --git a/include/uapi/linux/mroute.h b/include/uapi/linux/mroute.h
new file mode 100644
index 00000000000..16929993acc
--- /dev/null
+++ b/include/uapi/linux/mroute.h
@@ -0,0 +1,143 @@
+#ifndef _UAPI__LINUX_MROUTE_H
+#define _UAPI__LINUX_MROUTE_H
+
+#include <linux/sockios.h>
+#include <linux/types.h>
+
+/*
+ *	Based on the MROUTING 3.5 defines primarily to keep
+ *	source compatibility with BSD.
+ *
+ *	See the mrouted code for the original history.
+ *
+ *      Protocol Independent Multicast (PIM) data structures included
+ *      Carlos Picoto (cap@di.fc.ul.pt)
+ *
+ */
+
+#define MRT_BASE	200
+#define MRT_INIT	(MRT_BASE)	/* Activate the kernel mroute code 	*/
+#define MRT_DONE	(MRT_BASE+1)	/* Shutdown the kernel mroute		*/
+#define MRT_ADD_VIF	(MRT_BASE+2)	/* Add a virtual interface		*/
+#define MRT_DEL_VIF	(MRT_BASE+3)	/* Delete a virtual interface		*/
+#define MRT_ADD_MFC	(MRT_BASE+4)	/* Add a multicast forwarding entry	*/
+#define MRT_DEL_MFC	(MRT_BASE+5)	/* Delete a multicast forwarding entry	*/
+#define MRT_VERSION	(MRT_BASE+6)	/* Get the kernel multicast version	*/
+#define MRT_ASSERT	(MRT_BASE+7)	/* Activate PIM assert mode		*/
+#define MRT_PIM		(MRT_BASE+8)	/* enable PIM code			*/
+#define MRT_TABLE	(MRT_BASE+9)	/* Specify mroute table ID		*/
+
+#define SIOCGETVIFCNT	SIOCPROTOPRIVATE	/* IP protocol privates */
+#define SIOCGETSGCNT	(SIOCPROTOPRIVATE+1)
+#define SIOCGETRPF	(SIOCPROTOPRIVATE+2)
+
+#define MAXVIFS		32	
+typedef unsigned long vifbitmap_t;	/* User mode code depends on this lot */
+typedef unsigned short vifi_t;
+#define ALL_VIFS	((vifi_t)(-1))
+
+/*
+ *	Same idea as select
+ */
+ 
+#define VIFM_SET(n,m)	((m)|=(1<<(n)))
+#define VIFM_CLR(n,m)	((m)&=~(1<<(n)))
+#define VIFM_ISSET(n,m)	((m)&(1<<(n)))
+#define VIFM_CLRALL(m)	((m)=0)
+#define VIFM_COPY(mfrom,mto)	((mto)=(mfrom))
+#define VIFM_SAME(m1,m2)	((m1)==(m2))
+
+/*
+ *	Passed by mrouted for an MRT_ADD_VIF - again we use the
+ *	mrouted 3.6 structures for compatibility
+ */
+ 
+struct vifctl {
+	vifi_t	vifc_vifi;		/* Index of VIF */
+	unsigned char vifc_flags;	/* VIFF_ flags */
+	unsigned char vifc_threshold;	/* ttl limit */
+	unsigned int vifc_rate_limit;	/* Rate limiter values (NI) */
+	union {
+		struct in_addr vifc_lcl_addr;     /* Local interface address */
+		int            vifc_lcl_ifindex;  /* Local interface index   */
+	};
+	struct in_addr vifc_rmt_addr;	/* IPIP tunnel addr */
+};
+
+#define VIFF_TUNNEL		0x1	/* IPIP tunnel */
+#define VIFF_SRCRT		0x2	/* NI */
+#define VIFF_REGISTER		0x4	/* register vif	*/
+#define VIFF_USE_IFINDEX	0x8	/* use vifc_lcl_ifindex instead of
+					   vifc_lcl_addr to find an interface */
+
+/*
+ *	Cache manipulation structures for mrouted and PIMd
+ */
+ 
+struct mfcctl {
+	struct in_addr mfcc_origin;		/* Origin of mcast	*/
+	struct in_addr mfcc_mcastgrp;		/* Group in question	*/
+	vifi_t	mfcc_parent;			/* Where it arrived	*/
+	unsigned char mfcc_ttls[MAXVIFS];	/* Where it is going	*/
+	unsigned int mfcc_pkt_cnt;		/* pkt count for src-grp */
+	unsigned int mfcc_byte_cnt;
+	unsigned int mfcc_wrong_if;
+	int	     mfcc_expire;
+};
+
+/* 
+ *	Group count retrieval for mrouted
+ */
+ 
+struct sioc_sg_req {
+	struct in_addr src;
+	struct in_addr grp;
+	unsigned long pktcnt;
+	unsigned long bytecnt;
+	unsigned long wrong_if;
+};
+
+/*
+ *	To get vif packet counts
+ */
+
+struct sioc_vif_req {
+	vifi_t	vifi;		/* Which iface */
+	unsigned long icount;	/* In packets */
+	unsigned long ocount;	/* Out packets */
+	unsigned long ibytes;	/* In bytes */
+	unsigned long obytes;	/* Out bytes */
+};
+
+/*
+ *	This is the format the mroute daemon expects to see IGMP control
+ *	data. Magically happens to be like an IP packet as per the original
+ */
+ 
+struct igmpmsg {
+	__u32 unused1,unused2;
+	unsigned char im_msgtype;		/* What is this */
+	unsigned char im_mbz;			/* Must be zero */
+	unsigned char im_vif;			/* Interface (this ought to be a vifi_t!) */
+	unsigned char unused3;
+	struct in_addr im_src,im_dst;
+};
+
+/*
+ *	That's all usermode folks
+ */
+
+
+
+#define MFC_ASSERT_THRESH (3*HZ)		/* Maximal freq. of asserts */
+
+/*
+ *	Pseudo messages used by mrouted
+ */
+
+#define IGMPMSG_NOCACHE		1		/* Kern cache fill request to mrouted */
+#define IGMPMSG_WRONGVIF	2		/* For PIM assert processing (unused) */
+#define IGMPMSG_WHOLEPKT	3		/* For PIM Register processing */
+
+
+#endif /* _UAPI__LINUX_MROUTE_H */
diff --git a/include/uapi/linux/mroute6.h b/include/uapi/linux/mroute6.h
new file mode 100644
index 00000000000..3e89b5e7f9e
--- /dev/null
+++ b/include/uapi/linux/mroute6.h
@@ -0,0 +1,137 @@
+#ifndef _UAPI__LINUX_MROUTE6_H
+#define _UAPI__LINUX_MROUTE6_H
+
+#include <linux/types.h>
+#include <linux/sockios.h>
+
+/*
+ *	Based on the MROUTING 3.5 defines primarily to keep
+ *	source compatibility with BSD.
+ *
+ *	See the pim6sd code for the original history.
+ *
+ *      Protocol Independent Multicast (PIM) data structures included
+ *      Carlos Picoto (cap@di.fc.ul.pt)
+ *
+ */
+
+#define MRT6_BASE	200
+#define MRT6_INIT	(MRT6_BASE)	/* Activate the kernel mroute code 	*/
+#define MRT6_DONE	(MRT6_BASE+1)	/* Shutdown the kernel mroute		*/
+#define MRT6_ADD_MIF	(MRT6_BASE+2)	/* Add a virtual interface		*/
+#define MRT6_DEL_MIF	(MRT6_BASE+3)	/* Delete a virtual interface		*/
+#define MRT6_ADD_MFC	(MRT6_BASE+4)	/* Add a multicast forwarding entry	*/
+#define MRT6_DEL_MFC	(MRT6_BASE+5)	/* Delete a multicast forwarding entry	*/
+#define MRT6_VERSION	(MRT6_BASE+6)	/* Get the kernel multicast version	*/
+#define MRT6_ASSERT	(MRT6_BASE+7)	/* Activate PIM assert mode		*/
+#define MRT6_PIM	(MRT6_BASE+8)	/* enable PIM code			*/
+#define MRT6_TABLE	(MRT6_BASE+9)	/* Specify mroute table ID		*/
+
+#define SIOCGETMIFCNT_IN6	SIOCPROTOPRIVATE	/* IP protocol privates */
+#define SIOCGETSGCNT_IN6	(SIOCPROTOPRIVATE+1)
+#define SIOCGETRPF	(SIOCPROTOPRIVATE+2)
+
+#define MAXMIFS		32
+typedef unsigned long mifbitmap_t;	/* User mode code depends on this lot */
+typedef unsigned short mifi_t;
+#define ALL_MIFS	((mifi_t)(-1))
+
+#ifndef IF_SETSIZE
+#define IF_SETSIZE	256
+#endif
+
+typedef	__u32		if_mask;
+#define NIFBITS (sizeof(if_mask) * 8)        /* bits per mask */
+
+#if !defined(__KERNEL__)
+#if !defined(DIV_ROUND_UP)
+#define	DIV_ROUND_UP(x,y)	(((x) + ((y) - 1)) / (y))
+#endif
+#endif
+
+typedef struct if_set {
+	if_mask ifs_bits[DIV_ROUND_UP(IF_SETSIZE, NIFBITS)];
+} if_set;
+
+#define IF_SET(n, p)    ((p)->ifs_bits[(n)/NIFBITS] |= (1 << ((n) % NIFBITS)))
+#define IF_CLR(n, p)    ((p)->ifs_bits[(n)/NIFBITS] &= ~(1 << ((n) % NIFBITS)))
+#define IF_ISSET(n, p)  ((p)->ifs_bits[(n)/NIFBITS] & (1 << ((n) % NIFBITS)))
+#define IF_COPY(f, t)   bcopy(f, t, sizeof(*(f)))
+#define IF_ZERO(p)      bzero(p, sizeof(*(p)))
+
+/*
+ *	Passed by mrouted for an MRT_ADD_MIF - again we use the
+ *	mrouted 3.6 structures for compatibility
+ */
+
+struct mif6ctl {
+	mifi_t	mif6c_mifi;		/* Index of MIF */
+	unsigned char mif6c_flags;	/* MIFF_ flags */
+	unsigned char vifc_threshold;	/* ttl limit */
+	__u16	 mif6c_pifi;		/* the index of the physical IF */
+	unsigned int vifc_rate_limit;	/* Rate limiter values (NI) */
+};
+
+#define MIFF_REGISTER	0x1	/* register vif	*/
+
+/*
+ *	Cache manipulation structures for mrouted and PIMd
+ */
+
+struct mf6cctl {
+	struct sockaddr_in6 mf6cc_origin;		/* Origin of mcast	*/
+	struct sockaddr_in6 mf6cc_mcastgrp;		/* Group in question	*/
+	mifi_t	mf6cc_parent;			/* Where it arrived	*/
+	struct if_set mf6cc_ifset;		/* Where it is going */
+};
+
+/*
+ *	Group count retrieval for pim6sd
+ */
+
+struct sioc_sg_req6 {
+	struct sockaddr_in6 src;
+	struct sockaddr_in6 grp;
+	unsigned long pktcnt;
+	unsigned long bytecnt;
+	unsigned long wrong_if;
+};
+
+/*
+ *	To get vif packet counts
+ */
+
+struct sioc_mif_req6 {
+	mifi_t	mifi;		/* Which iface */
+	unsigned long icount;	/* In packets */
+	unsigned long ocount;	/* Out packets */
+	unsigned long ibytes;	/* In bytes */
+	unsigned long obytes;	/* Out bytes */
+};
+
+/*
+ *	That's all usermode folks
+ */
+
+
+
+/*
+ * Structure used to communicate from kernel to multicast router.
+ * We'll overlay the structure onto an MLD header (not an IPv6 heder like igmpmsg{}
+ * used for IPv4 implementation). This is because this structure will be passed via an
+ * IPv6 raw socket, on which an application will only receiver the payload i.e the data after
+ * the IPv6 header and all the extension headers. (See section 3 of RFC 3542)
+ */
+
+struct mrt6msg {
+#define MRT6MSG_NOCACHE		1
+#define MRT6MSG_WRONGMIF	2
+#define MRT6MSG_WHOLEPKT	3		/* used for use level encap */
+	__u8		im6_mbz;		/* must be zero		   */
+	__u8		im6_msgtype;		/* what type of message    */
+	__u16		im6_mif;		/* mif rec'd on		   */
+	__u32		im6_pad;		/* padding for 64 bit arch */
+	struct in6_addr	im6_src, im6_dst;
+};
+
+#endif /* _UAPI__LINUX_MROUTE6_H */
diff --git a/include/uapi/linux/msdos_fs.h b/include/uapi/linux/msdos_fs.h
new file mode 100644
index 00000000000..996719f82e2
--- /dev/null
+++ b/include/uapi/linux/msdos_fs.h
@@ -0,0 +1,167 @@
+#ifndef _UAPI_LINUX_MSDOS_FS_H
+#define _UAPI_LINUX_MSDOS_FS_H
+
+#include <linux/types.h>
+#include <linux/magic.h>
+#include <asm/byteorder.h>
+
+/*
+ * The MS-DOS filesystem constants/structures
+ */
+
+#define SECTOR_SIZE	512		/* sector size (bytes) */
+#define SECTOR_BITS	9		/* log2(SECTOR_SIZE) */
+#define MSDOS_DPB	(MSDOS_DPS)	/* dir entries per block */
+#define MSDOS_DPB_BITS	4		/* log2(MSDOS_DPB) */
+#define MSDOS_DPS	(SECTOR_SIZE / sizeof(struct msdos_dir_entry))
+#define MSDOS_DPS_BITS	4		/* log2(MSDOS_DPS) */
+#define MSDOS_LONGNAME	256		/* maximum name length */
+#define CF_LE_W(v)	le16_to_cpu(v)
+#define CF_LE_L(v)	le32_to_cpu(v)
+#define CT_LE_W(v)	cpu_to_le16(v)
+#define CT_LE_L(v)	cpu_to_le32(v)
+
+#define MSDOS_ROOT_INO	 1	/* The root inode number */
+#define MSDOS_FSINFO_INO 2	/* Used for managing the FSINFO block */
+
+#define MSDOS_DIR_BITS	5	/* log2(sizeof(struct msdos_dir_entry)) */
+
+/* directory limit */
+#define FAT_MAX_DIR_ENTRIES	(65536)
+#define FAT_MAX_DIR_SIZE	(FAT_MAX_DIR_ENTRIES << MSDOS_DIR_BITS)
+
+#define ATTR_NONE	0	/* no attribute bits */
+#define ATTR_RO		1	/* read-only */
+#define ATTR_HIDDEN	2	/* hidden */
+#define ATTR_SYS	4	/* system */
+#define ATTR_VOLUME	8	/* volume label */
+#define ATTR_DIR	16	/* directory */
+#define ATTR_ARCH	32	/* archived */
+
+/* attribute bits that are copied "as is" */
+#define ATTR_UNUSED	(ATTR_VOLUME | ATTR_ARCH | ATTR_SYS | ATTR_HIDDEN)
+/* bits that are used by the Windows 95/Windows NT extended FAT */
+#define ATTR_EXT	(ATTR_RO | ATTR_HIDDEN | ATTR_SYS | ATTR_VOLUME)
+
+#define CASE_LOWER_BASE	8	/* base is lower case */
+#define CASE_LOWER_EXT	16	/* extension is lower case */
+
+#define DELETED_FLAG	0xe5	/* marks file as deleted when in name[0] */
+#define IS_FREE(n)	(!*(n) || *(n) == DELETED_FLAG)
+
+#define FAT_LFN_LEN	255	/* maximum long name length */
+#define MSDOS_NAME	11	/* maximum name length */
+#define MSDOS_SLOTS	21	/* max # of slots for short and long names */
+#define MSDOS_DOT	".          "	/* ".", padded to MSDOS_NAME chars */
+#define MSDOS_DOTDOT	"..         "	/* "..", padded to MSDOS_NAME chars */
+
+#define FAT_FIRST_ENT(s, x)	((MSDOS_SB(s)->fat_bits == 32 ? 0x0FFFFF00 : \
+	MSDOS_SB(s)->fat_bits == 16 ? 0xFF00 : 0xF00) | (x))
+
+/* start of data cluster's entry (number of reserved clusters) */
+#define FAT_START_ENT	2
+
+/* maximum number of clusters */
+#define MAX_FAT12	0xFF4
+#define MAX_FAT16	0xFFF4
+#define MAX_FAT32	0x0FFFFFF6
+#define MAX_FAT(s)	(MSDOS_SB(s)->fat_bits == 32 ? MAX_FAT32 : \
+	MSDOS_SB(s)->fat_bits == 16 ? MAX_FAT16 : MAX_FAT12)
+
+/* bad cluster mark */
+#define BAD_FAT12	0xFF7
+#define BAD_FAT16	0xFFF7
+#define BAD_FAT32	0x0FFFFFF7
+
+/* standard EOF */
+#define EOF_FAT12	0xFFF
+#define EOF_FAT16	0xFFFF
+#define EOF_FAT32	0x0FFFFFFF
+
+#define FAT_ENT_FREE	(0)
+#define FAT_ENT_BAD	(BAD_FAT32)
+#define FAT_ENT_EOF	(EOF_FAT32)
+
+#define FAT_FSINFO_SIG1	0x41615252
+#define FAT_FSINFO_SIG2	0x61417272
+#define IS_FSINFO(x)	(le32_to_cpu((x)->signature1) == FAT_FSINFO_SIG1 \
+			 && le32_to_cpu((x)->signature2) == FAT_FSINFO_SIG2)
+
+struct __fat_dirent {
+	long		d_ino;
+	__kernel_off_t	d_off;
+	unsigned short	d_reclen;
+	char		d_name[256]; /* We must not include limits.h! */
+};
+
+/*
+ * ioctl commands
+ */
+#define VFAT_IOCTL_READDIR_BOTH		_IOR('r', 1, struct __fat_dirent[2])
+#define VFAT_IOCTL_READDIR_SHORT	_IOR('r', 2, struct __fat_dirent[2])
+/* <linux/videotext.h> has used 0x72 ('r') in collision, so skip a few */
+#define FAT_IOCTL_GET_ATTRIBUTES	_IOR('r', 0x10, __u32)
+#define FAT_IOCTL_SET_ATTRIBUTES	_IOW('r', 0x11, __u32)
+
+struct fat_boot_sector {
+	__u8	ignored[3];	/* Boot strap short or near jump */
+	__u8	system_id[8];	/* Name - can be used to special case
+				   partition manager volumes */
+	__u8	sector_size[2];	/* bytes per logical sector */
+	__u8	sec_per_clus;	/* sectors/cluster */
+	__le16	reserved;	/* reserved sectors */
+	__u8	fats;		/* number of FATs */
+	__u8	dir_entries[2];	/* root directory entries */
+	__u8	sectors[2];	/* number of sectors */
+	__u8	media;		/* media code */
+	__le16	fat_length;	/* sectors/FAT */
+	__le16	secs_track;	/* sectors per track */
+	__le16	heads;		/* number of heads */
+	__le32	hidden;		/* hidden sectors (unused) */
+	__le32	total_sect;	/* number of sectors (if sectors == 0) */
+
+	/* The following fields are only used by FAT32 */
+	__le32	fat32_length;	/* sectors/FAT */
+	__le16	flags;		/* bit 8: fat mirroring, low 4: active fat */
+	__u8	version[2];	/* major, minor filesystem version */
+	__le32	root_cluster;	/* first cluster in root directory */
+	__le16	info_sector;	/* filesystem info sector */
+	__le16	backup_boot;	/* backup boot sector */
+	__le16	reserved2[6];	/* Unused */
+};
+
+struct fat_boot_fsinfo {
+	__le32   signature1;	/* 0x41615252L */
+	__le32   reserved1[120];	/* Nothing as far as I can tell */
+	__le32   signature2;	/* 0x61417272L */
+	__le32   free_clusters;	/* Free cluster count.  -1 if unknown */
+	__le32   next_cluster;	/* Most recently allocated cluster */
+	__le32   reserved2[4];
+};
+
+struct msdos_dir_entry {
+	__u8	name[MSDOS_NAME];/* name and extension */
+	__u8	attr;		/* attribute bits */
+	__u8    lcase;		/* Case for base and extension */
+	__u8	ctime_cs;	/* Creation time, centiseconds (0-199) */
+	__le16	ctime;		/* Creation time */
+	__le16	cdate;		/* Creation date */
+	__le16	adate;		/* Last access date */
+	__le16	starthi;	/* High 16 bits of cluster in FAT32 */
+	__le16	time,date,start;/* time, date and first cluster */
+	__le32	size;		/* file size (in bytes) */
+};
+
+/* Up to 13 characters of the name */
+struct msdos_dir_slot {
+	__u8    id;		/* sequence number for slot */
+	__u8    name0_4[10];	/* first 5 characters in name */
+	__u8    attr;		/* attribute byte */
+	__u8    reserved;	/* always 0 */
+	__u8    alias_checksum;	/* checksum for 8.3 alias */
+	__u8    name5_10[12];	/* 6 more characters in name */
+	__le16   start;		/* starting cluster number, 0 in long slots */
+	__u8    name11_12[4];	/* last 2 characters in name */
+};
+
+#endif /* _UAPI_LINUX_MSDOS_FS_H */
diff --git a/include/uapi/linux/msg.h b/include/uapi/linux/msg.h
new file mode 100644
index 00000000000..78dbd2f996a
--- /dev/null
+++ b/include/uapi/linux/msg.h
@@ -0,0 +1,75 @@
+#ifndef _UAPI_LINUX_MSG_H
+#define _UAPI_LINUX_MSG_H
+
+#include <linux/ipc.h>
+
+/* ipcs ctl commands */
+#define MSG_STAT 11
+#define MSG_INFO 12
+
+/* msgrcv options */
+#define MSG_NOERROR     010000  /* no error if message is too big */
+#define MSG_EXCEPT      020000  /* recv any msg except of specified type.*/
+
+/* Obsolete, used only for backwards compatibility and libc5 compiles */
+struct msqid_ds {
+	struct ipc_perm msg_perm;
+	struct msg *msg_first;		/* first message on queue,unused  */
+	struct msg *msg_last;		/* last message in queue,unused */
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long  msg_lcbytes;	/* Reuse junk fields for 32 bit */
+	unsigned long  msg_lqbytes;	/* ditto */
+	unsigned short msg_cbytes;	/* current number of bytes on queue */
+	unsigned short msg_qnum;	/* number of messages in queue */
+	unsigned short msg_qbytes;	/* max number of bytes on queue */
+	__kernel_ipc_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_ipc_pid_t msg_lrpid;	/* last receive pid */
+};
+
+/* Include the definition of msqid64_ds */
+#include <asm/msgbuf.h>
+
+/* message buffer for msgsnd and msgrcv calls */
+struct msgbuf {
+	long mtype;         /* type of message */
+	char mtext[1];      /* message text */
+};
+
+/* buffer for msgctl calls IPC_INFO, MSG_INFO */
+struct msginfo {
+	int msgpool;
+	int msgmap; 
+	int msgmax; 
+	int msgmnb; 
+	int msgmni; 
+	int msgssz; 
+	int msgtql; 
+	unsigned short  msgseg; 
+};
+
+/*
+ * Scaling factor to compute msgmni:
+ * the memory dedicated to msg queues (msgmni * msgmnb) should occupy
+ * at most 1/MSG_MEM_SCALE of the lowmem (see the formula in ipc/msg.c):
+ * up to 8MB       : msgmni = 16 (MSGMNI)
+ * 4 GB            : msgmni = 8K
+ * more than 16 GB : msgmni = 32K (IPCMNI)
+ */
+#define MSG_MEM_SCALE 32
+
+#define MSGMNI    16   /* <= IPCMNI */     /* max # of msg queue identifiers */
+#define MSGMAX  8192   /* <= INT_MAX */   /* max size of message (bytes) */
+#define MSGMNB 16384   /* <= INT_MAX */   /* default max size of a message queue */
+
+/* unused */
+#define MSGPOOL (MSGMNI * MSGMNB / 1024) /* size in kbytes of message pool */
+#define MSGTQL  MSGMNB            /* number of system message headers */
+#define MSGMAP  MSGMNB            /* number of entries in message map */
+#define MSGSSZ  16                /* message segment size */
+#define __MSGSEG ((MSGPOOL * 1024) / MSGSSZ) /* max no. of segments */
+#define MSGSEG (__MSGSEG <= 0xffff ? __MSGSEG : 0xffff)
+
+
+#endif /* _UAPI_LINUX_MSG_H */
diff --git a/include/uapi/linux/mtio.h b/include/uapi/linux/mtio.h
new file mode 100644
index 00000000000..18543e2db06
--- /dev/null
+++ b/include/uapi/linux/mtio.h
@@ -0,0 +1,208 @@
+/* 
+ * linux/mtio.h header file for Linux. Written by H. Bergman
+ *
+ * Modified for special ioctls provided by zftape in September 1997
+ * by C.-J. Heine.
+ */
+
+#ifndef _LINUX_MTIO_H
+#define _LINUX_MTIO_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+/*
+ * Structures and definitions for mag tape io control commands
+ */
+
+/* structure for MTIOCTOP - mag tape op command */
+struct	mtop {
+	short	mt_op;		/* operations defined below */
+	int	mt_count;	/* how many of them */
+};
+
+/* Magnetic Tape operations [Not all operations supported by all drivers]: */
+#define MTRESET 0	/* +reset drive in case of problems */
+#define MTFSF	1	/* forward space over FileMark,
+			 * position at first record of next file 
+			 */
+#define MTBSF	2	/* backward space FileMark (position before FM) */
+#define MTFSR	3	/* forward space record */
+#define MTBSR	4	/* backward space record */
+#define MTWEOF	5	/* write an end-of-file record (mark) */
+#define MTREW	6	/* rewind */
+#define MTOFFL	7	/* rewind and put the drive offline (eject?) */
+#define MTNOP	8	/* no op, set status only (read with MTIOCGET) */
+#define MTRETEN 9	/* retension tape */
+#define MTBSFM	10	/* +backward space FileMark, position at FM */
+#define MTFSFM  11	/* +forward space FileMark, position at FM */
+#define MTEOM	12	/* goto end of recorded media (for appending files).
+			 * MTEOM positions after the last FM, ready for
+			 * appending another file.
+			 */
+#define MTERASE 13	/* erase tape -- be careful! */
+
+#define MTRAS1  14	/* run self test 1 (nondestructive) */
+#define MTRAS2	15	/* run self test 2 (destructive) */
+#define MTRAS3  16	/* reserved for self test 3 */
+
+#define MTSETBLK 20	/* set block length (SCSI) */
+#define MTSETDENSITY 21	/* set tape density (SCSI) */
+#define MTSEEK	22	/* seek to block (Tandberg, etc.) */
+#define MTTELL	23	/* tell block (Tandberg, etc.) */
+#define MTSETDRVBUFFER 24 /* set the drive buffering according to SCSI-2 */
+			/* ordinary buffered operation with code 1 */
+#define MTFSS	25	/* space forward over setmarks */
+#define MTBSS	26	/* space backward over setmarks */
+#define MTWSM	27	/* write setmarks */
+
+#define MTLOCK  28	/* lock the drive door */
+#define MTUNLOCK 29	/* unlock the drive door */
+#define MTLOAD  30	/* execute the SCSI load command */
+#define MTUNLOAD 31	/* execute the SCSI unload command */
+#define MTCOMPRESSION 32/* control compression with SCSI mode page 15 */
+#define MTSETPART 33	/* Change the active tape partition */
+#define MTMKPART  34	/* Format the tape with one or two partitions */
+#define MTWEOFI	35	/* write an end-of-file record (mark) in immediate mode */
+
+/* structure for MTIOCGET - mag tape get status command */
+
+struct	mtget {
+	long	mt_type;	/* type of magtape device */
+	long	mt_resid;	/* residual count: (not sure)
+				 *	number of bytes ignored, or
+				 *	number of files not skipped, or
+				 *	number of records not skipped.
+				 */
+	/* the following registers are device dependent */
+	long	mt_dsreg;	/* status register */
+	long	mt_gstat;	/* generic (device independent) status */
+	long	mt_erreg;	/* error register */
+	/* The next two fields are not always used */
+	__kernel_daddr_t mt_fileno;	/* number of current file on tape */
+	__kernel_daddr_t mt_blkno;	/* current block number */
+};
+
+
+
+/*
+ * Constants for mt_type. Not all of these are supported,
+ * and these are not all of the ones that are supported.
+ */
+#define MT_ISUNKNOWN		0x01
+#define MT_ISQIC02		0x02	/* Generic QIC-02 tape streamer */
+#define MT_ISWT5150		0x03	/* Wangtek 5150EQ, QIC-150, QIC-02 */
+#define MT_ISARCHIVE_5945L2	0x04	/* Archive 5945L-2, QIC-24, QIC-02? */
+#define MT_ISCMSJ500		0x05	/* CMS Jumbo 500 (QIC-02?) */
+#define MT_ISTDC3610		0x06	/* Tandberg 6310, QIC-24 */
+#define MT_ISARCHIVE_VP60I	0x07	/* Archive VP60i, QIC-02 */
+#define MT_ISARCHIVE_2150L	0x08	/* Archive Viper 2150L */
+#define MT_ISARCHIVE_2060L	0x09	/* Archive Viper 2060L */
+#define MT_ISARCHIVESC499	0x0A	/* Archive SC-499 QIC-36 controller */
+#define MT_ISQIC02_ALL_FEATURES	0x0F	/* Generic QIC-02 with all features */
+#define MT_ISWT5099EEN24	0x11	/* Wangtek 5099-een24, 60MB, QIC-24 */
+#define MT_ISTEAC_MT2ST		0x12	/* Teac MT-2ST 155mb drive, Teac DC-1 card (Wangtek type) */
+#define MT_ISEVEREX_FT40A	0x32	/* Everex FT40A (QIC-40) */
+#define MT_ISDDS1		0x51	/* DDS device without partitions */
+#define MT_ISDDS2		0x52	/* DDS device with partitions */
+#define MT_ISONSTREAM_SC        0x61   /* OnStream SCSI tape drives (SC-x0)
+					  and SCSI emulated (DI, DP, USB) */
+#define MT_ISSCSI1		0x71	/* Generic ANSI SCSI-1 tape unit */
+#define MT_ISSCSI2		0x72	/* Generic ANSI SCSI-2 tape unit */
+
+/* QIC-40/80/3010/3020 ftape supported drives.
+ * 20bit vendor ID + 0x800000 (see ftape-vendors.h)
+ */
+#define MT_ISFTAPE_UNKNOWN	0x800000 /* obsolete */
+#define MT_ISFTAPE_FLAG	0x800000
+
+
+/* structure for MTIOCPOS - mag tape get position command */
+
+struct	mtpos {
+	long 	mt_blkno;	/* current block number */
+};
+
+
+/* mag tape io control commands */
+#define	MTIOCTOP	_IOW('m', 1, struct mtop)	/* do a mag tape op */
+#define	MTIOCGET	_IOR('m', 2, struct mtget)	/* get tape status */
+#define	MTIOCPOS	_IOR('m', 3, struct mtpos)	/* get tape position */
+
+
+/* Generic Mag Tape (device independent) status macros for examining
+ * mt_gstat -- HP-UX compatible.
+ * There is room for more generic status bits here, but I don't
+ * know which of them are reserved. At least three or so should
+ * be added to make this really useful.
+ */
+#define GMT_EOF(x)              ((x) & 0x80000000)
+#define GMT_BOT(x)              ((x) & 0x40000000)
+#define GMT_EOT(x)              ((x) & 0x20000000)
+#define GMT_SM(x)               ((x) & 0x10000000)  /* DDS setmark */
+#define GMT_EOD(x)              ((x) & 0x08000000)  /* DDS EOD */
+#define GMT_WR_PROT(x)          ((x) & 0x04000000)
+/* #define GMT_ ? 		((x) & 0x02000000) */
+#define GMT_ONLINE(x)           ((x) & 0x01000000)
+#define GMT_D_6250(x)           ((x) & 0x00800000)
+#define GMT_D_1600(x)           ((x) & 0x00400000)
+#define GMT_D_800(x)            ((x) & 0x00200000)
+/* #define GMT_ ? 		((x) & 0x00100000) */
+/* #define GMT_ ? 		((x) & 0x00080000) */
+#define GMT_DR_OPEN(x)          ((x) & 0x00040000)  /* door open (no tape) */
+/* #define GMT_ ? 		((x) & 0x00020000) */
+#define GMT_IM_REP_EN(x)        ((x) & 0x00010000)  /* immediate report mode */
+#define GMT_CLN(x)              ((x) & 0x00008000)  /* cleaning requested */
+/* 15 generic status bits unused */
+
+
+/* SCSI-tape specific definitions */
+/* Bitfield shifts in the status  */
+#define MT_ST_BLKSIZE_SHIFT	0
+#define MT_ST_BLKSIZE_MASK	0xffffff
+#define MT_ST_DENSITY_SHIFT	24
+#define MT_ST_DENSITY_MASK	0xff000000
+
+#define MT_ST_SOFTERR_SHIFT	0
+#define MT_ST_SOFTERR_MASK	0xffff
+
+/* Bitfields for the MTSETDRVBUFFER ioctl */
+#define MT_ST_OPTIONS		0xf0000000
+#define MT_ST_BOOLEANS		0x10000000
+#define MT_ST_SETBOOLEANS	0x30000000
+#define MT_ST_CLEARBOOLEANS	0x40000000
+#define MT_ST_WRITE_THRESHOLD	0x20000000
+#define MT_ST_DEF_BLKSIZE	0x50000000
+#define MT_ST_DEF_OPTIONS	0x60000000
+#define MT_ST_TIMEOUTS		0x70000000
+#define MT_ST_SET_TIMEOUT	(MT_ST_TIMEOUTS | 0x000000)
+#define MT_ST_SET_LONG_TIMEOUT	(MT_ST_TIMEOUTS | 0x100000)
+#define MT_ST_SET_CLN		0x80000000
+
+#define MT_ST_BUFFER_WRITES	0x1
+#define MT_ST_ASYNC_WRITES	0x2
+#define MT_ST_READ_AHEAD	0x4
+#define MT_ST_DEBUGGING		0x8
+#define MT_ST_TWO_FM		0x10
+#define MT_ST_FAST_MTEOM	0x20
+#define MT_ST_AUTO_LOCK		0x40
+#define MT_ST_DEF_WRITES	0x80
+#define MT_ST_CAN_BSR		0x100
+#define MT_ST_NO_BLKLIMS	0x200
+#define MT_ST_CAN_PARTITIONS    0x400
+#define MT_ST_SCSI2LOGICAL      0x800
+#define MT_ST_SYSV              0x1000
+#define MT_ST_NOWAIT            0x2000
+#define MT_ST_SILI		0x4000
+#define MT_ST_NOWAIT_EOF	0x8000
+
+/* The mode parameters to be controlled. Parameter chosen with bits 20-28 */
+#define MT_ST_CLEAR_DEFAULT	0xfffff
+#define MT_ST_DEF_DENSITY	(MT_ST_DEF_OPTIONS | 0x100000)
+#define MT_ST_DEF_COMPRESSION	(MT_ST_DEF_OPTIONS | 0x200000)
+#define MT_ST_DEF_DRVBUFFER	(MT_ST_DEF_OPTIONS | 0x300000)
+
+/* The offset for the arguments for the special HP changer load command. */
+#define MT_ST_HPLOADER_OFFSET 10000
+
+#endif /* _LINUX_MTIO_H */
diff --git a/include/uapi/linux/n_r3964.h b/include/uapi/linux/n_r3964.h
new file mode 100644
index 00000000000..81337cbf40b
--- /dev/null
+++ b/include/uapi/linux/n_r3964.h
@@ -0,0 +1,98 @@
+/* r3964 linediscipline for linux
+ *
+ * -----------------------------------------------------------
+ * Copyright by
+ * Philips Automation Projects
+ * Kassel (Germany)
+ * -----------------------------------------------------------
+ * This software may be used and distributed according to the terms of
+ * the GNU General Public License, incorporated herein by reference.
+ *
+ * Author:
+ * L. Haag
+ *
+ * $Log: r3964.h,v $
+ * Revision 1.4  2005/12/21 19:54:24  Kurt Huwig <kurt huwig de>
+ * Fixed HZ usage on 2.6 kernels
+ * Removed unnecessary include
+ *
+ * Revision 1.3  2001/03/18 13:02:24  dwmw2
+ * Fix timer usage, use spinlocks properly.
+ *
+ * Revision 1.2  2001/03/18 12:53:15  dwmw2
+ * Merge changes in 2.4.2
+ *
+ * Revision 1.1.1.1  1998/10/13 16:43:14  dwmw2
+ * This'll screw the version control
+ *
+ * Revision 1.6  1998/09/30 00:40:38  dwmw2
+ * Updated to use kernel's N_R3964 if available
+ *
+ * Revision 1.4  1998/04/02 20:29:44  lhaag
+ * select, blocking, ...
+ *
+ * Revision 1.3  1998/02/12 18:58:43  root
+ * fixed some memory leaks
+ * calculation of checksum characters
+ *
+ * Revision 1.2  1998/02/07 13:03:17  root
+ * ioctl read_telegram
+ *
+ * Revision 1.1  1998/02/06 19:19:43  root
+ * Initial revision
+ *
+ *
+ */
+
+#ifndef _UAPI__LINUX_N_R3964_H__
+#define _UAPI__LINUX_N_R3964_H__
+
+/* line disciplines for r3964 protocol */
+
+
+/*
+ * Ioctl-commands
+ */
+
+#define R3964_ENABLE_SIGNALS      0x5301
+#define R3964_SETPRIORITY         0x5302
+#define R3964_USE_BCC             0x5303
+#define R3964_READ_TELEGRAM       0x5304
+
+/* Options for R3964_SETPRIORITY */
+#define R3964_MASTER   0
+#define R3964_SLAVE    1
+
+/* Options for R3964_ENABLE_SIGNALS */
+#define R3964_SIG_ACK   0x0001
+#define R3964_SIG_DATA  0x0002
+#define R3964_SIG_ALL   0x000f
+#define R3964_SIG_NONE  0x0000
+#define R3964_USE_SIGIO 0x1000
+
+/*
+ * r3964 operation states:
+ */
+
+/* types for msg_id: */
+enum {R3964_MSG_ACK=1, R3964_MSG_DATA };
+
+#define R3964_MAX_MSG_COUNT 32
+
+/* error codes for client messages */
+#define R3964_OK 0        /* no error. */
+#define R3964_TX_FAIL -1  /* transmission error, block NOT sent */
+#define R3964_OVERFLOW -2 /* msg queue overflow */
+
+/* the client gets this struct when calling read(fd,...): */
+struct r3964_client_message {
+	  int     msg_id;
+	  int     arg;
+	  int     error_code;
+};
+
+#define R3964_MTU      256
+
+
+
+#endif /* _UAPI__LINUX_N_R3964_H__ */
diff --git a/include/uapi/linux/nbd.h b/include/uapi/linux/nbd.h
new file mode 100644
index 00000000000..dfb514472cb
--- /dev/null
+++ b/include/uapi/linux/nbd.h
@@ -0,0 +1,77 @@
+/*
+ * 1999 Copyright (C) Pavel Machek, pavel@ucw.cz. This code is GPL.
+ * 1999/11/04 Copyright (C) 1999 VMware, Inc. (Regis "HPReg" Duchesne)
+ *            Made nbd_end_request() use the io_request_lock
+ * 2001 Copyright (C) Steven Whitehouse
+ *            New nbd_end_request() for compatibility with new linux block
+ *            layer code.
+ * 2003/06/24 Louis D. Langholtz <ldl@aros.net>
+ *            Removed unneeded blksize_bits field from nbd_device struct.
+ *            Cleanup PARANOIA usage & code.
+ * 2004/02/19 Paul Clements
+ *            Removed PARANOIA, plus various cleanup and comments
+ */
+
+#ifndef _UAPILINUX_NBD_H
+#define _UAPILINUX_NBD_H
+
+#include <linux/types.h>
+
+#define NBD_SET_SOCK	_IO( 0xab, 0 )
+#define NBD_SET_BLKSIZE	_IO( 0xab, 1 )
+#define NBD_SET_SIZE	_IO( 0xab, 2 )
+#define NBD_DO_IT	_IO( 0xab, 3 )
+#define NBD_CLEAR_SOCK	_IO( 0xab, 4 )
+#define NBD_CLEAR_QUE	_IO( 0xab, 5 )
+#define NBD_PRINT_DEBUG	_IO( 0xab, 6 )
+#define NBD_SET_SIZE_BLOCKS	_IO( 0xab, 7 )
+#define NBD_DISCONNECT  _IO( 0xab, 8 )
+#define NBD_SET_TIMEOUT _IO( 0xab, 9 )
+#define NBD_SET_FLAGS   _IO( 0xab, 10)
+
+enum {
+	NBD_CMD_READ = 0,
+	NBD_CMD_WRITE = 1,
+	NBD_CMD_DISC = 2,
+	/* there is a gap here to match userspace */
+	NBD_CMD_TRIM = 4
+};
+
+/* values for flags field */
+#define NBD_FLAG_HAS_FLAGS    (1 << 0) /* nbd-server supports flags */
+#define NBD_FLAG_READ_ONLY    (1 << 1) /* device is read-only */
+/* there is a gap here to match userspace */
+#define NBD_FLAG_SEND_TRIM    (1 << 5) /* send trim/discard */
+
+#define nbd_cmd(req) ((req)->cmd[0])
+
+/* userspace doesn't need the nbd_device structure */
+
+/* These are sent over the network in the request/reply magic fields */
+
+#define NBD_REQUEST_MAGIC 0x25609513
+#define NBD_REPLY_MAGIC 0x67446698
+/* Do *not* use magics: 0x12560953 0x96744668. */
+
+/*
+ * This is the packet used for communication between client and
+ * server. All data are in network byte order.
+ */
+struct nbd_request {
+	__be32 magic;
+	__be32 type;	/* == READ || == WRITE 	*/
+	char handle[8];
+	__be64 from;
+	__be32 len;
+} __attribute__((packed));
+
+/*
+ * This is the reply packet that nbd-server sends back to the client after
+ * it has completed an I/O request (or an error occurs).
+ */
+struct nbd_reply {
+	__be32 magic;
+	__be32 error;		/* 0 = ok, else error	*/
+	char handle[8];		/* handle you got from request	*/
+};
+#endif /* _UAPILINUX_NBD_H */
diff --git a/include/uapi/linux/ncp.h b/include/uapi/linux/ncp.h
new file mode 100644
index 00000000000..99f0adeeb3f
--- /dev/null
+++ b/include/uapi/linux/ncp.h
@@ -0,0 +1,201 @@
+/*
+ *  ncp.h
+ *
+ *  Copyright (C) 1995 by Volker Lendecke
+ *  Modified for sparc by J.F. Chadima
+ *  Modified for __constant_ntoh by Frank A. Vorstenbosch
+ *
+ */
+
+#ifndef _LINUX_NCP_H
+#define _LINUX_NCP_H
+
+#include <linux/types.h>
+
+#define NCP_PTYPE                (0x11)
+#define NCP_PORT                 (0x0451)
+
+#define NCP_ALLOC_SLOT_REQUEST   (0x1111)
+#define NCP_REQUEST              (0x2222)
+#define NCP_DEALLOC_SLOT_REQUEST (0x5555)
+
+struct ncp_request_header {
+	__u16 type;
+	__u8 sequence;
+	__u8 conn_low;
+	__u8 task;
+	__u8 conn_high;
+	__u8 function;
+	__u8 data[0];
+} __attribute__((packed));
+
+#define NCP_REPLY                (0x3333)
+#define NCP_WATCHDOG		 (0x3E3E)
+#define NCP_POSITIVE_ACK         (0x9999)
+
+struct ncp_reply_header {
+	__u16 type;
+	__u8 sequence;
+	__u8 conn_low;
+	__u8 task;
+	__u8 conn_high;
+	__u8 completion_code;
+	__u8 connection_state;
+	__u8 data[0];
+} __attribute__((packed));
+
+#define NCP_VOLNAME_LEN (16)
+#define NCP_NUMBER_OF_VOLUMES (256)
+struct ncp_volume_info {
+	__u32 total_blocks;
+	__u32 free_blocks;
+	__u32 purgeable_blocks;
+	__u32 not_yet_purgeable_blocks;
+	__u32 total_dir_entries;
+	__u32 available_dir_entries;
+	__u8 sectors_per_block;
+	char volume_name[NCP_VOLNAME_LEN + 1];
+};
+
+#define AR_READ      (cpu_to_le16(1))
+#define AR_WRITE     (cpu_to_le16(2))
+#define AR_EXCLUSIVE (cpu_to_le16(0x20))
+
+#define NCP_FILE_ID_LEN 6
+
+/* Defines for Name Spaces */
+#define NW_NS_DOS     0
+#define NW_NS_MAC     1
+#define NW_NS_NFS     2
+#define NW_NS_FTAM    3
+#define NW_NS_OS2     4
+
+/*  Defines for ReturnInformationMask */
+#define RIM_NAME	      (cpu_to_le32(1))
+#define RIM_SPACE_ALLOCATED   (cpu_to_le32(2))
+#define RIM_ATTRIBUTES	      (cpu_to_le32(4))
+#define RIM_DATA_SIZE	      (cpu_to_le32(8))
+#define RIM_TOTAL_SIZE	      (cpu_to_le32(0x10))
+#define RIM_EXT_ATTR_INFO     (cpu_to_le32(0x20))
+#define RIM_ARCHIVE	      (cpu_to_le32(0x40))
+#define RIM_MODIFY	      (cpu_to_le32(0x80))
+#define RIM_CREATION	      (cpu_to_le32(0x100))
+#define RIM_OWNING_NAMESPACE  (cpu_to_le32(0x200))
+#define RIM_DIRECTORY	      (cpu_to_le32(0x400))
+#define RIM_RIGHTS	      (cpu_to_le32(0x800))
+#define RIM_ALL 	      (cpu_to_le32(0xFFF))
+#define RIM_COMPRESSED_INFO   (cpu_to_le32(0x80000000))
+
+/* Defines for NSInfoBitMask */
+#define NSIBM_NFS_NAME		0x0001
+#define NSIBM_NFS_MODE		0x0002
+#define NSIBM_NFS_GID		0x0004
+#define NSIBM_NFS_NLINKS	0x0008
+#define NSIBM_NFS_RDEV		0x0010
+#define NSIBM_NFS_LINK		0x0020
+#define NSIBM_NFS_CREATED	0x0040
+#define NSIBM_NFS_UID		0x0080
+#define NSIBM_NFS_ACSFLAG	0x0100
+#define NSIBM_NFS_MYFLAG	0x0200
+
+/* open/create modes */
+#define OC_MODE_OPEN	  0x01
+#define OC_MODE_TRUNCATE  0x02
+#define OC_MODE_REPLACE   0x02
+#define OC_MODE_CREATE	  0x08
+
+/* open/create results */
+#define OC_ACTION_NONE	   0x00
+#define OC_ACTION_OPEN	   0x01
+#define OC_ACTION_CREATE   0x02
+#define OC_ACTION_TRUNCATE 0x04
+#define OC_ACTION_REPLACE  0x04
+
+/* access rights attributes */
+#ifndef AR_READ_ONLY
+#define AR_READ_ONLY	   0x0001
+#define AR_WRITE_ONLY	   0x0002
+#define AR_DENY_READ	   0x0004
+#define AR_DENY_WRITE	   0x0008
+#define AR_COMPATIBILITY   0x0010
+#define AR_WRITE_THROUGH   0x0040
+#define AR_OPEN_COMPRESSED 0x0100
+#endif
+
+struct nw_nfs_info {
+	__u32 mode;
+	__u32 rdev;
+};
+
+struct nw_info_struct {
+	__u32 spaceAlloc;
+	__le32 attributes;
+	__u16 flags;
+	__le32 dataStreamSize;
+	__le32 totalStreamSize;
+	__u16 numberOfStreams;
+	__le16 creationTime;
+	__le16 creationDate;
+	__u32 creatorID;
+	__le16 modifyTime;
+	__le16 modifyDate;
+	__u32 modifierID;
+	__le16 lastAccessDate;
+	__u16 archiveTime;
+	__u16 archiveDate;
+	__u32 archiverID;
+	__u16 inheritedRightsMask;
+	__le32 dirEntNum;
+	__le32 DosDirNum;
+	__u32 volNumber;
+	__u32 EADataSize;
+	__u32 EAKeyCount;
+	__u32 EAKeySize;
+	__u32 NSCreator;
+	__u8 nameLen;
+	__u8 entryName[256];
+	/* libncp may depend on there being nothing after entryName */
+#ifdef __KERNEL__
+	struct nw_nfs_info nfs;
+#endif
+} __attribute__((packed));
+
+/* modify mask - use with MODIFY_DOS_INFO structure */
+#define DM_ATTRIBUTES		  (cpu_to_le32(0x02))
+#define DM_CREATE_DATE		  (cpu_to_le32(0x04))
+#define DM_CREATE_TIME		  (cpu_to_le32(0x08))
+#define DM_CREATOR_ID		  (cpu_to_le32(0x10))
+#define DM_ARCHIVE_DATE 	  (cpu_to_le32(0x20))
+#define DM_ARCHIVE_TIME 	  (cpu_to_le32(0x40))
+#define DM_ARCHIVER_ID		  (cpu_to_le32(0x80))
+#define DM_MODIFY_DATE		  (cpu_to_le32(0x0100))
+#define DM_MODIFY_TIME		  (cpu_to_le32(0x0200))
+#define DM_MODIFIER_ID		  (cpu_to_le32(0x0400))
+#define DM_LAST_ACCESS_DATE	  (cpu_to_le32(0x0800))
+#define DM_INHERITED_RIGHTS_MASK  (cpu_to_le32(0x1000))
+#define DM_MAXIMUM_SPACE	  (cpu_to_le32(0x2000))
+
+struct nw_modify_dos_info {
+	__le32 attributes;
+	__le16 creationDate;
+	__le16 creationTime;
+	__u32 creatorID;
+	__le16 modifyDate;
+	__le16 modifyTime;
+	__u32 modifierID;
+	__u16 archiveDate;
+	__u16 archiveTime;
+	__u32 archiverID;
+	__le16 lastAccessDate;
+	__u16 inheritanceGrantMask;
+	__u16 inheritanceRevokeMask;
+	__u32 maximumSpace;
+} __attribute__((packed));
+
+struct nw_search_sequence {
+	__u8 volNumber;
+	__u32 dirBase;
+	__u32 sequence;
+} __attribute__((packed));
+
+#endif				/* _LINUX_NCP_H */
diff --git a/include/uapi/linux/ncp_fs.h b/include/uapi/linux/ncp_fs.h
new file mode 100644
index 00000000000..e13eefef065
--- /dev/null
+++ b/include/uapi/linux/ncp_fs.h
@@ -0,0 +1,146 @@
+/*
+ *  ncp_fs.h
+ *
+ *  Copyright (C) 1995, 1996 by Volker Lendecke
+ *
+ */
+
+#ifndef _LINUX_NCP_FS_H
+#define _LINUX_NCP_FS_H
+
+#include <linux/fs.h>
+#include <linux/in.h>
+#include <linux/types.h>
+#include <linux/magic.h>
+
+#include <linux/ipx.h>
+#include <linux/ncp_no.h>
+
+/*
+ * ioctl commands
+ */
+
+struct ncp_ioctl_request {
+	unsigned int function;
+	unsigned int size;
+	char __user *data;
+};
+
+struct ncp_fs_info {
+	int version;
+	struct sockaddr_ipx addr;
+	__kernel_uid_t mounted_uid;
+	int connection;		/* Connection number the server assigned us */
+	int buffer_size;	/* The negotiated buffer size, to be
+				   used for read/write requests! */
+
+	int volume_number;
+	__le32 directory_id;
+};
+
+struct ncp_fs_info_v2 {
+	int version;
+	unsigned long mounted_uid;
+	unsigned int connection;
+	unsigned int buffer_size;
+
+	unsigned int volume_number;
+	__le32 directory_id;
+
+	__u32 dummy1;
+	__u32 dummy2;
+	__u32 dummy3;
+};
+
+struct ncp_sign_init
+{
+	char sign_root[8];
+	char sign_last[16];
+};
+
+struct ncp_lock_ioctl
+{
+#define NCP_LOCK_LOG	0
+#define NCP_LOCK_SH	1
+#define NCP_LOCK_EX	2
+#define NCP_LOCK_CLEAR	256
+	int		cmd;
+	int		origin;
+	unsigned int	offset;
+	unsigned int	length;
+#define NCP_LOCK_DEFAULT_TIMEOUT	18
+#define NCP_LOCK_MAX_TIMEOUT		180
+	int		timeout;
+};
+
+struct ncp_setroot_ioctl
+{
+	int		volNumber;
+	int		namespace;
+	__le32		dirEntNum;
+};
+
+struct ncp_objectname_ioctl
+{
+#define NCP_AUTH_NONE	0x00
+#define NCP_AUTH_BIND	0x31
+#define NCP_AUTH_NDS	0x32
+	int		auth_type;
+	size_t		object_name_len;
+	void __user *	object_name;	/* a userspace data, in most cases user name */
+};
+
+struct ncp_privatedata_ioctl
+{
+	size_t		len;
+	void __user *	data;		/* ~1000 for NDS */
+};
+
+/* NLS charsets by ioctl */
+#define NCP_IOCSNAME_LEN 20
+struct ncp_nls_ioctl
+{
+	unsigned char codepage[NCP_IOCSNAME_LEN+1];
+	unsigned char iocharset[NCP_IOCSNAME_LEN+1];
+};
+
+#define	NCP_IOC_NCPREQUEST		_IOR('n', 1, struct ncp_ioctl_request)
+#define	NCP_IOC_GETMOUNTUID		_IOW('n', 2, __kernel_old_uid_t)
+#define NCP_IOC_GETMOUNTUID2		_IOW('n', 2, unsigned long)
+
+#define NCP_IOC_CONN_LOGGED_IN          _IO('n', 3)
+
+#define NCP_GET_FS_INFO_VERSION    (1)
+#define NCP_IOC_GET_FS_INFO             _IOWR('n', 4, struct ncp_fs_info)
+#define NCP_GET_FS_INFO_VERSION_V2 (2)
+#define NCP_IOC_GET_FS_INFO_V2		_IOWR('n', 4, struct ncp_fs_info_v2)
+
+#define NCP_IOC_SIGN_INIT		_IOR('n', 5, struct ncp_sign_init)
+#define NCP_IOC_SIGN_WANTED		_IOR('n', 6, int)
+#define NCP_IOC_SET_SIGN_WANTED		_IOW('n', 6, int)
+
+#define NCP_IOC_LOCKUNLOCK		_IOR('n', 7, struct ncp_lock_ioctl)
+
+#define NCP_IOC_GETROOT			_IOW('n', 8, struct ncp_setroot_ioctl)
+#define NCP_IOC_SETROOT			_IOR('n', 8, struct ncp_setroot_ioctl)
+
+#define NCP_IOC_GETOBJECTNAME		_IOWR('n', 9, struct ncp_objectname_ioctl)
+#define NCP_IOC_SETOBJECTNAME		_IOR('n', 9, struct ncp_objectname_ioctl)
+#define NCP_IOC_GETPRIVATEDATA		_IOWR('n', 10, struct ncp_privatedata_ioctl)
+#define NCP_IOC_SETPRIVATEDATA		_IOR('n', 10, struct ncp_privatedata_ioctl)
+
+#define NCP_IOC_GETCHARSETS		_IOWR('n', 11, struct ncp_nls_ioctl)
+#define NCP_IOC_SETCHARSETS		_IOR('n', 11, struct ncp_nls_ioctl)
+
+#define NCP_IOC_GETDENTRYTTL		_IOW('n', 12, __u32)
+#define NCP_IOC_SETDENTRYTTL		_IOR('n', 12, __u32)
+
+/*
+ * The packet size to allocate. One page should be enough.
+ */
+#define NCP_PACKET_SIZE 4070
+
+#define NCP_MAXPATHLEN 255
+#define NCP_MAXNAMELEN 14
+
+#endif				/* _LINUX_NCP_FS_H */
diff --git a/include/uapi/linux/ncp_mount.h b/include/uapi/linux/ncp_mount.h
new file mode 100644
index 00000000000..dfcbea2d889
--- /dev/null
+++ b/include/uapi/linux/ncp_mount.h
@@ -0,0 +1,71 @@
+/*
+ *  ncp_mount.h
+ *
+ *  Copyright (C) 1995, 1996 by Volker Lendecke
+ *
+ */
+
+#ifndef _LINUX_NCP_MOUNT_H
+#define _LINUX_NCP_MOUNT_H
+
+#include <linux/types.h>
+#include <linux/ncp.h>
+
+#define NCP_MOUNT_VERSION 3	/* Binary */
+
+/* Values for flags */
+#define NCP_MOUNT_SOFT		0x0001
+#define NCP_MOUNT_INTR		0x0002
+#define NCP_MOUNT_STRONG	0x0004	/* enable delete/rename of r/o files */
+#define NCP_MOUNT_NO_OS2	0x0008	/* do not use OS/2 (LONG) namespace */
+#define NCP_MOUNT_NO_NFS	0x0010	/* do not use NFS namespace */
+#define NCP_MOUNT_EXTRAS	0x0020
+#define NCP_MOUNT_SYMLINKS	0x0040	/* enable symlinks */
+#define NCP_MOUNT_NFS_EXTRAS	0x0080	/* Enable use of NFS NS meta-info */
+
+struct ncp_mount_data {
+	int version;
+	unsigned int ncp_fd;	/* The socket to the ncp port */
+	__kernel_uid_t mounted_uid;	/* Who may umount() this filesystem? */
+	__kernel_pid_t wdog_pid;		/* Who cares for our watchdog packets? */
+
+	unsigned char mounted_vol[NCP_VOLNAME_LEN + 1];
+	unsigned int time_out;	/* How long should I wait after
+				   sending a NCP request? */
+	unsigned int retry_count;	/* And how often should I retry? */
+	unsigned int flags;
+
+	__kernel_uid_t uid;
+	__kernel_gid_t gid;
+	__kernel_mode_t file_mode;
+	__kernel_mode_t dir_mode;
+};
+
+#define NCP_MOUNT_VERSION_V4	(4)	/* Binary or text */
+
+struct ncp_mount_data_v4 {
+	int version;
+	unsigned long flags;	/* NCP_MOUNT_* flags */
+	/* MIPS uses long __kernel_uid_t, but... */
+	/* we neever pass -1, so it is safe */
+	unsigned long mounted_uid;	/* Who may umount() this filesystem? */
+	/* MIPS uses long __kernel_pid_t */
+	long wdog_pid;		/* Who cares for our watchdog packets? */
+
+	unsigned int ncp_fd;	/* The socket to the ncp port */
+	unsigned int time_out;	/* How long should I wait after
+				   sending a NCP request? */
+	unsigned int retry_count;	/* And how often should I retry? */
+
+	/* MIPS uses long __kernel_uid_t... */
+	/* we never pass -1, so it is safe */
+	unsigned long uid;
+	unsigned long gid;
+	/* MIPS uses unsigned long __kernel_mode_t */
+	unsigned long file_mode;
+	unsigned long dir_mode;
+};
+
+#define NCP_MOUNT_VERSION_V5	(5)	/* Text only */
+
+#endif
diff --git a/include/uapi/linux/ncp_no.h b/include/uapi/linux/ncp_no.h
new file mode 100644
index 00000000000..cddaa48fb18
--- /dev/null
+++ b/include/uapi/linux/ncp_no.h
@@ -0,0 +1,19 @@
+#ifndef _NCP_NO
+#define _NCP_NO
+
+/* these define the attribute byte as seen by NCP */
+#define aRONLY			(__cpu_to_le32(1))
+#define aHIDDEN			(__cpu_to_le32(2))
+#define aSYSTEM			(__cpu_to_le32(4))
+#define aEXECUTE		(__cpu_to_le32(8))
+#define aDIR			(__cpu_to_le32(0x10))
+#define aARCH			(__cpu_to_le32(0x20))
+#define aSHARED			(__cpu_to_le32(0x80))
+#define aDONTSUBALLOCATE	(__cpu_to_le32(1L<<11))
+#define aTRANSACTIONAL		(__cpu_to_le32(1L<<12))
+#define aPURGE			(__cpu_to_le32(1L<<16))
+#define aRENAMEINHIBIT		(__cpu_to_le32(1L<<17))
+#define aDELETEINHIBIT		(__cpu_to_le32(1L<<18))
+#define aDONTCOMPRESS		(__cpu_to_le32(1L<<27))
+
+#endif /* _NCP_NO */
diff --git a/include/uapi/linux/neighbour.h b/include/uapi/linux/neighbour.h
new file mode 100644
index 00000000000..275e5d65dcb
--- /dev/null
+++ b/include/uapi/linux/neighbour.h
@@ -0,0 +1,159 @@
+#ifndef __LINUX_NEIGHBOUR_H
+#define __LINUX_NEIGHBOUR_H
+
+#include <linux/types.h>
+#include <linux/netlink.h>
+
+struct ndmsg {
+	__u8		ndm_family;
+	__u8		ndm_pad1;
+	__u16		ndm_pad2;
+	__s32		ndm_ifindex;
+	__u16		ndm_state;
+	__u8		ndm_flags;
+	__u8		ndm_type;
+};
+
+enum {
+	NDA_UNSPEC,
+	NDA_DST,
+	NDA_LLADDR,
+	NDA_CACHEINFO,
+	NDA_PROBES,
+	__NDA_MAX
+};
+
+#define NDA_MAX (__NDA_MAX - 1)
+
+/*
+ *	Neighbor Cache Entry Flags
+ */
+
+#define NTF_USE		0x01
+#define NTF_PROXY	0x08	/* == ATF_PUBL */
+#define NTF_ROUTER	0x80
+
+#define NTF_SELF	0x02
+#define NTF_MASTER	0x04
+
+/*
+ *	Neighbor Cache Entry States.
+ */
+
+#define NUD_INCOMPLETE	0x01
+#define NUD_REACHABLE	0x02
+#define NUD_STALE	0x04
+#define NUD_DELAY	0x08
+#define NUD_PROBE	0x10
+#define NUD_FAILED	0x20
+
+/* Dummy states */
+#define NUD_NOARP	0x40
+#define NUD_PERMANENT	0x80
+#define NUD_NONE	0x00
+
+/* NUD_NOARP & NUD_PERMANENT are pseudostates, they never change
+   and make no address resolution or NUD.
+   NUD_PERMANENT is also cannot be deleted by garbage collectors.
+ */
+
+struct nda_cacheinfo {
+	__u32		ndm_confirmed;
+	__u32		ndm_used;
+	__u32		ndm_updated;
+	__u32		ndm_refcnt;
+};
+
+/*****************************************************************
+ *		Neighbour tables specific messages.
+ *
+ * To retrieve the neighbour tables send RTM_GETNEIGHTBL with the
+ * NLM_F_DUMP flag set. Every neighbour table configuration is
+ * spread over multiple messages to avoid running into message
+ * size limits on systems with many interfaces. The first message
+ * in the sequence transports all not device specific data such as
+ * statistics, configuration, and the default parameter set.
+ * This message is followed by 0..n messages carrying device
+ * specific parameter sets.
+ * Although the ordering should be sufficient, NDTA_NAME can be
+ * used to identify sequences. The initial message can be identified
+ * by checking for NDTA_CONFIG. The device specific messages do
+ * not contain this TLV but have NDTPA_IFINDEX set to the
+ * corresponding interface index.
+ *
+ * To change neighbour table attributes, send RTM_SETNEIGHTBL
+ * with NDTA_NAME set. Changeable attribute include NDTA_THRESH[1-3],
+ * NDTA_GC_INTERVAL, and all TLVs in NDTA_PARMS unless marked
+ * otherwise. Device specific parameter sets can be changed by
+ * setting NDTPA_IFINDEX to the interface index of the corresponding
+ * device.
+ ****/
+
+struct ndt_stats {
+	__u64		ndts_allocs;
+	__u64		ndts_destroys;
+	__u64		ndts_hash_grows;
+	__u64		ndts_res_failed;
+	__u64		ndts_lookups;
+	__u64		ndts_hits;
+	__u64		ndts_rcv_probes_mcast;
+	__u64		ndts_rcv_probes_ucast;
+	__u64		ndts_periodic_gc_runs;
+	__u64		ndts_forced_gc_runs;
+};
+
+enum {
+	NDTPA_UNSPEC,
+	NDTPA_IFINDEX,			/* u32, unchangeable */
+	NDTPA_REFCNT,			/* u32, read-only */
+	NDTPA_REACHABLE_TIME,		/* u64, read-only, msecs */
+	NDTPA_BASE_REACHABLE_TIME,	/* u64, msecs */
+	NDTPA_RETRANS_TIME,		/* u64, msecs */
+	NDTPA_GC_STALETIME,		/* u64, msecs */
+	NDTPA_DELAY_PROBE_TIME,		/* u64, msecs */
+	NDTPA_QUEUE_LEN,		/* u32 */
+	NDTPA_APP_PROBES,		/* u32 */
+	NDTPA_UCAST_PROBES,		/* u32 */
+	NDTPA_MCAST_PROBES,		/* u32 */
+	NDTPA_ANYCAST_DELAY,		/* u64, msecs */
+	NDTPA_PROXY_DELAY,		/* u64, msecs */
+	NDTPA_PROXY_QLEN,		/* u32 */
+	NDTPA_LOCKTIME,			/* u64, msecs */
+	NDTPA_QUEUE_LENBYTES,		/* u32 */
+	__NDTPA_MAX
+};
+#define NDTPA_MAX (__NDTPA_MAX - 1)
+
+struct ndtmsg {
+	__u8		ndtm_family;
+	__u8		ndtm_pad1;
+	__u16		ndtm_pad2;
+};
+
+struct ndt_config {
+	__u16		ndtc_key_len;
+	__u16		ndtc_entry_size;
+	__u32		ndtc_entries;
+	__u32		ndtc_last_flush;	/* delta to now in msecs */
+	__u32		ndtc_last_rand;		/* delta to now in msecs */
+	__u32		ndtc_hash_rnd;
+	__u32		ndtc_hash_mask;
+	__u32		ndtc_hash_chain_gc;
+	__u32		ndtc_proxy_qlen;
+};
+
+enum {
+	NDTA_UNSPEC,
+	NDTA_NAME,			/* char *, unchangeable */
+	NDTA_THRESH1,			/* u32 */
+	NDTA_THRESH2,			/* u32 */
+	NDTA_THRESH3,			/* u32 */
+	NDTA_CONFIG,			/* struct ndt_config, read-only */
+	NDTA_PARMS,			/* nested TLV NDTPA_* */
+	NDTA_STATS,			/* struct ndt_stats, read-only */
+	NDTA_GC_INTERVAL,		/* u64, msecs */
+	__NDTA_MAX
+};
+#define NDTA_MAX (__NDTA_MAX - 1)
+
+#endif
diff --git a/include/uapi/linux/net.h b/include/uapi/linux/net.h
new file mode 100644
index 00000000000..9457239ed21
--- /dev/null
+++ b/include/uapi/linux/net.h
@@ -0,0 +1,57 @@
+/*
+ * NET		An implementation of the SOCKET network access protocol.
+ *		This is the master header file for the Linux NET layer,
+ *		or, in plain English: the networking handling part of the
+ *		kernel.
+ *
+ * Version:	@(#)net.h	1.0.3	05/25/93
+ *
+ * Authors:	Orest Zborowski, <obz@Kodak.COM>
+ *		Ross Biro
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_LINUX_NET_H
+#define _UAPI_LINUX_NET_H
+
+#include <linux/socket.h>
+#include <asm/socket.h>
+
+#define NPROTO		AF_MAX
+
+#define SYS_SOCKET	1		/* sys_socket(2)		*/
+#define SYS_BIND	2		/* sys_bind(2)			*/
+#define SYS_CONNECT	3		/* sys_connect(2)		*/
+#define SYS_LISTEN	4		/* sys_listen(2)		*/
+#define SYS_ACCEPT	5		/* sys_accept(2)		*/
+#define SYS_GETSOCKNAME	6		/* sys_getsockname(2)		*/
+#define SYS_GETPEERNAME	7		/* sys_getpeername(2)		*/
+#define SYS_SOCKETPAIR	8		/* sys_socketpair(2)		*/
+#define SYS_SEND	9		/* sys_send(2)			*/
+#define SYS_RECV	10		/* sys_recv(2)			*/
+#define SYS_SENDTO	11		/* sys_sendto(2)		*/
+#define SYS_RECVFROM	12		/* sys_recvfrom(2)		*/
+#define SYS_SHUTDOWN	13		/* sys_shutdown(2)		*/
+#define SYS_SETSOCKOPT	14		/* sys_setsockopt(2)		*/
+#define SYS_GETSOCKOPT	15		/* sys_getsockopt(2)		*/
+#define SYS_SENDMSG	16		/* sys_sendmsg(2)		*/
+#define SYS_RECVMSG	17		/* sys_recvmsg(2)		*/
+#define SYS_ACCEPT4	18		/* sys_accept4(2)		*/
+#define SYS_RECVMMSG	19		/* sys_recvmmsg(2)		*/
+#define SYS_SENDMMSG	20		/* sys_sendmmsg(2)		*/
+
+typedef enum {
+	SS_FREE = 0,			/* not allocated		*/
+	SS_UNCONNECTED,			/* unconnected to any socket	*/
+	SS_CONNECTING,			/* in process of connecting	*/
+	SS_CONNECTED,			/* connected to socket		*/
+	SS_DISCONNECTING		/* in process of disconnecting	*/
+} socket_state;
+
+#define __SO_ACCEPTCON	(1 << 16)	/* performed a listen		*/
+
+#endif /* _UAPI_LINUX_NET_H */
diff --git a/include/uapi/linux/net_dropmon.h b/include/uapi/linux/net_dropmon.h
new file mode 100644
index 00000000000..2a739462cae
--- /dev/null
+++ b/include/uapi/linux/net_dropmon.h
@@ -0,0 +1,64 @@
+#ifndef __NET_DROPMON_H
+#define __NET_DROPMON_H
+
+#include <linux/types.h>
+#include <linux/netlink.h>
+
+struct net_dm_drop_point {
+	__u8 pc[8];
+	__u32 count;
+};
+
+#define is_drop_point_hw(x) do {\
+	int ____i, ____j;\
+	for (____i = 0; ____i < 8; i ____i++)\
+		____j |= x[____i];\
+	____j;\
+} while (0)
+
+#define NET_DM_CFG_VERSION  0
+#define NET_DM_CFG_ALERT_COUNT  1
+#define NET_DM_CFG_ALERT_DELAY 2
+#define NET_DM_CFG_MAX 3
+
+struct net_dm_config_entry {
+	__u32 type;
+	__u64 data __attribute__((aligned(8)));
+};
+
+struct net_dm_config_msg {
+	__u32 entries;
+	struct net_dm_config_entry options[0];
+};
+
+struct net_dm_alert_msg {
+	__u32 entries;
+	struct net_dm_drop_point points[0];
+};
+
+struct net_dm_user_msg {
+	union {
+		struct net_dm_config_msg user;
+		struct net_dm_alert_msg alert;
+	} u;
+};
+
+
+/* These are the netlink message types for this protocol */
+
+enum {
+	NET_DM_CMD_UNSPEC = 0,
+	NET_DM_CMD_ALERT,
+	NET_DM_CMD_CONFIG,
+	NET_DM_CMD_START,
+	NET_DM_CMD_STOP,
+	_NET_DM_CMD_MAX,
+};
+
+#define NET_DM_CMD_MAX (_NET_DM_CMD_MAX - 1)
+
+/*
+ * Our group identifiers
+ */
+#define NET_DM_GRP_ALERT 1
+#endif
diff --git a/include/uapi/linux/net_tstamp.h b/include/uapi/linux/net_tstamp.h
new file mode 100644
index 00000000000..ae5df122e42
--- /dev/null
+++ b/include/uapi/linux/net_tstamp.h
@@ -0,0 +1,113 @@
+/*
+ * Userspace API for hardware time stamping of network packets
+ *
+ * Copyright (C) 2008,2009 Intel Corporation
+ * Author: Patrick Ohly <patrick.ohly@intel.com>
+ *
+ */
+
+#ifndef _NET_TIMESTAMPING_H
+#define _NET_TIMESTAMPING_H
+
+#include <linux/socket.h>   /* for SO_TIMESTAMPING */
+
+/* SO_TIMESTAMPING gets an integer bit field comprised of these values */
+enum {
+	SOF_TIMESTAMPING_TX_HARDWARE = (1<<0),
+	SOF_TIMESTAMPING_TX_SOFTWARE = (1<<1),
+	SOF_TIMESTAMPING_RX_HARDWARE = (1<<2),
+	SOF_TIMESTAMPING_RX_SOFTWARE = (1<<3),
+	SOF_TIMESTAMPING_SOFTWARE = (1<<4),
+	SOF_TIMESTAMPING_SYS_HARDWARE = (1<<5),
+	SOF_TIMESTAMPING_RAW_HARDWARE = (1<<6),
+	SOF_TIMESTAMPING_MASK =
+	(SOF_TIMESTAMPING_RAW_HARDWARE - 1) |
+	SOF_TIMESTAMPING_RAW_HARDWARE
+};
+
+/**
+ * struct hwtstamp_config - %SIOCSHWTSTAMP parameter
+ *
+ * @flags:	no flags defined right now, must be zero
+ * @tx_type:	one of HWTSTAMP_TX_*
+ * @rx_type:	one of one of HWTSTAMP_FILTER_*
+ *
+ * %SIOCSHWTSTAMP expects a &struct ifreq with a ifr_data pointer to
+ * this structure. dev_ifsioc() in the kernel takes care of the
+ * translation between 32 bit userspace and 64 bit kernel. The
+ * structure is intentionally chosen so that it has the same layout on
+ * 32 and 64 bit systems, don't break this!
+ */
+struct hwtstamp_config {
+	int flags;
+	int tx_type;
+	int rx_filter;
+};
+
+/* possible values for hwtstamp_config->tx_type */
+enum hwtstamp_tx_types {
+	/*
+	 * No outgoing packet will need hardware time stamping;
+	 * should a packet arrive which asks for it, no hardware
+	 * time stamping will be done.
+	 */
+	HWTSTAMP_TX_OFF,
+
+	/*
+	 * Enables hardware time stamping for outgoing packets;
+	 * the sender of the packet decides which are to be
+	 * time stamped by setting %SOF_TIMESTAMPING_TX_SOFTWARE
+	 * before sending the packet.
+	 */
+	HWTSTAMP_TX_ON,
+
+	/*
+	 * Enables time stamping for outgoing packets just as
+	 * HWTSTAMP_TX_ON does, but also enables time stamp insertion
+	 * directly into Sync packets. In this case, transmitted Sync
+	 * packets will not received a time stamp via the socket error
+	 * queue.
+	 */
+	HWTSTAMP_TX_ONESTEP_SYNC,
+};
+
+/* possible values for hwtstamp_config->rx_filter */
+enum hwtstamp_rx_filters {
+	/* time stamp no incoming packet at all */
+	HWTSTAMP_FILTER_NONE,
+
+	/* time stamp any incoming packet */
+	HWTSTAMP_FILTER_ALL,
+
+	/* return value: time stamp all packets requested plus some others */
+	HWTSTAMP_FILTER_SOME,
+
+	/* PTP v1, UDP, any kind of event packet */
+	HWTSTAMP_FILTER_PTP_V1_L4_EVENT,
+	/* PTP v1, UDP, Sync packet */
+	HWTSTAMP_FILTER_PTP_V1_L4_SYNC,
+	/* PTP v1, UDP, Delay_req packet */
+	HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ,
+	/* PTP v2, UDP, any kind of event packet */
+	HWTSTAMP_FILTER_PTP_V2_L4_EVENT,
+	/* PTP v2, UDP, Sync packet */
+	HWTSTAMP_FILTER_PTP_V2_L4_SYNC,
+	/* PTP v2, UDP, Delay_req packet */
+	HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ,
+
+	/* 802.AS1, Ethernet, any kind of event packet */
+	HWTSTAMP_FILTER_PTP_V2_L2_EVENT,
+	/* 802.AS1, Ethernet, Sync packet */
+	HWTSTAMP_FILTER_PTP_V2_L2_SYNC,
+	/* 802.AS1, Ethernet, Delay_req packet */
+	HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ,
+
+	/* PTP v2/802.AS1, any layer, any kind of event packet */
+	HWTSTAMP_FILTER_PTP_V2_EVENT,
+	/* PTP v2/802.AS1, any layer, Sync packet */
+	HWTSTAMP_FILTER_PTP_V2_SYNC,
+	/* PTP v2/802.AS1, any layer, Delay_req packet */
+	HWTSTAMP_FILTER_PTP_V2_DELAY_REQ,
+};
+
+#endif /* _NET_TIMESTAMPING_H */
diff --git a/include/uapi/linux/netdevice.h b/include/uapi/linux/netdevice.h
new file mode 100644
index 00000000000..6b9500bc2d5
--- /dev/null
+++ b/include/uapi/linux/netdevice.h
@@ -0,0 +1,53 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the Interfaces handler.
+ *
+ * Version:	@(#)dev.h	1.0.10	08/12/93
+ *
+ * Authors:	Ross Biro
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *		Corey Minyard <wf-rch!minyard@relay.EU.net>
+ *		Donald J. Becker, <becker@cesdis.gsfc.nasa.gov>
+ *		Alan Cox, <alan@lxorguk.ukuu.org.uk>
+ *		Bjorn Ekwall. <bj0rn@blox.se>
+ *              Pekka Riikonen <priikone@poseidon.pspt.fi>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ *		Moved to /usr/include/linux for NET3
+ */
+#ifndef _UAPI_LINUX_NETDEVICE_H
+#define _UAPI_LINUX_NETDEVICE_H
+
+#include <linux/if.h>
+#include <linux/if_ether.h>
+#include <linux/if_packet.h>
+#include <linux/if_link.h>
+
+
+#define MAX_ADDR_LEN	32		/* Largest hardware address length */
+
+/* Initial net device group. All devices belong to group 0 by default. */
+#define INIT_NETDEV_GROUP	0
+
+
+
+/* Media selection options. */
+enum {
+        IF_PORT_UNKNOWN = 0,
+        IF_PORT_10BASE2,
+        IF_PORT_10BASET,
+        IF_PORT_AUI,
+        IF_PORT_100BASET,
+        IF_PORT_100BASETX,
+        IF_PORT_100BASEFX
+};
+
+
+#endif /* _UAPI_LINUX_NETDEVICE_H */
diff --git a/include/uapi/linux/netfilter.h b/include/uapi/linux/netfilter.h
new file mode 100644
index 00000000000..f7dc0ebeeba
--- /dev/null
+++ b/include/uapi/linux/netfilter.h
@@ -0,0 +1,72 @@
+#ifndef _UAPI__LINUX_NETFILTER_H
+#define _UAPI__LINUX_NETFILTER_H
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <linux/sysctl.h>
+
+
+/* Responses from hook functions. */
+#define NF_DROP 0
+#define NF_ACCEPT 1
+#define NF_STOLEN 2
+#define NF_QUEUE 3
+#define NF_REPEAT 4
+#define NF_STOP 5
+#define NF_MAX_VERDICT NF_STOP
+
+/* we overload the higher bits for encoding auxiliary data such as the queue
+ * number or errno values. Not nice, but better than additional function
+ * arguments. */
+#define NF_VERDICT_MASK 0x000000ff
+
+/* extra verdict flags have mask 0x0000ff00 */
+#define NF_VERDICT_FLAG_QUEUE_BYPASS	0x00008000
+
+/* queue number (NF_QUEUE) or errno (NF_DROP) */
+#define NF_VERDICT_QMASK 0xffff0000
+#define NF_VERDICT_QBITS 16
+
+#define NF_QUEUE_NR(x) ((((x) << 16) & NF_VERDICT_QMASK) | NF_QUEUE)
+
+#define NF_DROP_ERR(x) (((-x) << 16) | NF_DROP)
+
+/* only for userspace compatibility */
+#ifndef __KERNEL__
+/* Generic cache responses from hook functions.
+   <= 0x2000 is used for protocol-flags. */
+#define NFC_UNKNOWN 0x4000
+#define NFC_ALTERED 0x8000
+
+/* NF_VERDICT_BITS should be 8 now, but userspace might break if this changes */
+#define NF_VERDICT_BITS 16
+#endif
+
+enum nf_inet_hooks {
+	NF_INET_PRE_ROUTING,
+	NF_INET_LOCAL_IN,
+	NF_INET_FORWARD,
+	NF_INET_LOCAL_OUT,
+	NF_INET_POST_ROUTING,
+	NF_INET_NUMHOOKS
+};
+
+enum {
+	NFPROTO_UNSPEC =  0,
+	NFPROTO_IPV4   =  2,
+	NFPROTO_ARP    =  3,
+	NFPROTO_BRIDGE =  7,
+	NFPROTO_IPV6   = 10,
+	NFPROTO_DECNET = 12,
+	NFPROTO_NUMPROTO,
+};
+
+union nf_inet_addr {
+	__u32		all[4];
+	__be32		ip;
+	__be32		ip6[4];
+	struct in_addr	in;
+	struct in6_addr	in6;
+};
+
+#endif /* _UAPI__LINUX_NETFILTER_H */
diff --git a/include/uapi/linux/netfilter_arp.h b/include/uapi/linux/netfilter_arp.h
new file mode 100644
index 00000000000..92bc6ddcbf7
--- /dev/null
+++ b/include/uapi/linux/netfilter_arp.h
@@ -0,0 +1,19 @@
+#ifndef __LINUX_ARP_NETFILTER_H
+#define __LINUX_ARP_NETFILTER_H
+
+/* ARP-specific defines for netfilter.
+ * (C)2002 Rusty Russell IBM -- This code is GPL.
+ */
+
+#include <linux/netfilter.h>
+
+/* There is no PF_ARP. */
+#define NF_ARP		0
+
+/* ARP Hooks */
+#define NF_ARP_IN	0
+#define NF_ARP_OUT	1
+#define NF_ARP_FORWARD	2
+#define NF_ARP_NUMHOOKS	3
+
+#endif /* __LINUX_ARP_NETFILTER_H */
diff --git a/include/uapi/linux/netfilter_bridge.h b/include/uapi/linux/netfilter_bridge.h
new file mode 100644
index 00000000000..a5eda6db8d7
--- /dev/null
+++ b/include/uapi/linux/netfilter_bridge.h
@@ -0,0 +1,27 @@
+#ifndef _UAPI__LINUX_BRIDGE_NETFILTER_H
+#define _UAPI__LINUX_BRIDGE_NETFILTER_H
+
+/* bridge-specific defines for netfilter. 
+ */
+
+#include <linux/netfilter.h>
+#include <linux/if_ether.h>
+#include <linux/if_vlan.h>
+#include <linux/if_pppox.h>
+
+/* Bridge Hooks */
+/* After promisc drops, checksum checks. */
+#define NF_BR_PRE_ROUTING	0
+/* If the packet is destined for this box. */
+#define NF_BR_LOCAL_IN		1
+/* If the packet is destined for another interface. */
+#define NF_BR_FORWARD		2
+/* Packets coming from a local process. */
+#define NF_BR_LOCAL_OUT		3
+/* Packets about to hit the wire. */
+#define NF_BR_POST_ROUTING	4
+/* Not really a hook, but used for the ebtables broute table */
+#define NF_BR_BROUTING		5
+#define NF_BR_NUMHOOKS		6
+
+#endif /* _UAPI__LINUX_BRIDGE_NETFILTER_H */
diff --git a/include/uapi/linux/netfilter_decnet.h b/include/uapi/linux/netfilter_decnet.h
new file mode 100644
index 00000000000..0b09732aacd
--- /dev/null
+++ b/include/uapi/linux/netfilter_decnet.h
@@ -0,0 +1,79 @@
+#ifndef __LINUX_DECNET_NETFILTER_H
+#define __LINUX_DECNET_NETFILTER_H
+
+/* DECnet-specific defines for netfilter. 
+ * This file (C) Steve Whitehouse 1999 derived from the
+ * ipv4 netfilter header file which is
+ * (C)1998 Rusty Russell -- This code is GPL.
+ */
+
+#include <linux/netfilter.h>
+
+/* only for userspace compatibility */
+#ifndef __KERNEL__
+
+#include <limits.h> /* for INT_MIN, INT_MAX */
+
+/* IP Cache bits. */
+/* Src IP address. */
+#define NFC_DN_SRC		0x0001
+/* Dest IP address. */
+#define NFC_DN_DST		0x0002
+/* Input device. */
+#define NFC_DN_IF_IN		0x0004
+/* Output device. */
+#define NFC_DN_IF_OUT		0x0008
+#endif /* ! __KERNEL__ */
+
+/* DECnet Hooks */
+/* After promisc drops, checksum checks. */
+#define NF_DN_PRE_ROUTING	0
+/* If the packet is destined for this box. */
+#define NF_DN_LOCAL_IN		1
+/* If the packet is destined for another interface. */
+#define NF_DN_FORWARD		2
+/* Packets coming from a local process. */
+#define NF_DN_LOCAL_OUT		3
+/* Packets about to hit the wire. */
+#define NF_DN_POST_ROUTING	4
+/* Input Hello Packets */
+#define NF_DN_HELLO		5
+/* Input Routing Packets */
+#define NF_DN_ROUTE		6
+#define NF_DN_NUMHOOKS		7
+
+enum nf_dn_hook_priorities {
+	NF_DN_PRI_FIRST = INT_MIN,
+	NF_DN_PRI_CONNTRACK = -200,
+	NF_DN_PRI_MANGLE = -150,
+	NF_DN_PRI_NAT_DST = -100,
+	NF_DN_PRI_FILTER = 0,
+	NF_DN_PRI_NAT_SRC = 100,
+	NF_DN_PRI_DNRTMSG = 200,
+	NF_DN_PRI_LAST = INT_MAX,
+};
+
+struct nf_dn_rtmsg {
+	int nfdn_ifindex;
+};
+
+#define NFDN_RTMSG(r) ((unsigned char *)(r) + NLMSG_ALIGN(sizeof(struct nf_dn_rtmsg)))
+
+#ifndef __KERNEL__
+/* backwards compatibility for userspace */
+#define DNRMG_L1_GROUP 0x01
+#define DNRMG_L2_GROUP 0x02
+#endif
+
+enum {
+	DNRNG_NLGRP_NONE,
+#define DNRNG_NLGRP_NONE	DNRNG_NLGRP_NONE
+	DNRNG_NLGRP_L1,
+#define DNRNG_NLGRP_L1		DNRNG_NLGRP_L1
+	DNRNG_NLGRP_L2,
+#define DNRNG_NLGRP_L2		DNRNG_NLGRP_L2
+	__DNRNG_NLGRP_MAX
+};
+#define DNRNG_NLGRP_MAX	(__DNRNG_NLGRP_MAX - 1)
+
+#endif /*__LINUX_DECNET_NETFILTER_H*/
diff --git a/include/uapi/linux/netfilter_ipv4.h b/include/uapi/linux/netfilter_ipv4.h
new file mode 100644
index 00000000000..91ddd1f6fd4
--- /dev/null
+++ b/include/uapi/linux/netfilter_ipv4.h
@@ -0,0 +1,81 @@
+/* IPv4-specific defines for netfilter. 
+ * (C)1998 Rusty Russell -- This code is GPL.
+ */
+#ifndef _UAPI__LINUX_IP_NETFILTER_H
+#define _UAPI__LINUX_IP_NETFILTER_H
+
+
+#include <linux/netfilter.h>
+
+/* only for userspace compatibility */
+#ifndef __KERNEL__
+
+#include <limits.h> /* for INT_MIN, INT_MAX */
+
+/* IP Cache bits. */
+/* Src IP address. */
+#define NFC_IP_SRC		0x0001
+/* Dest IP address. */
+#define NFC_IP_DST		0x0002
+/* Input device. */
+#define NFC_IP_IF_IN		0x0004
+/* Output device. */
+#define NFC_IP_IF_OUT		0x0008
+/* TOS. */
+#define NFC_IP_TOS		0x0010
+/* Protocol. */
+#define NFC_IP_PROTO		0x0020
+/* IP options. */
+#define NFC_IP_OPTIONS		0x0040
+/* Frag & flags. */
+#define NFC_IP_FRAG		0x0080
+
+/* Per-protocol information: only matters if proto match. */
+/* TCP flags. */
+#define NFC_IP_TCPFLAGS		0x0100
+/* Source port. */
+#define NFC_IP_SRC_PT		0x0200
+/* Dest port. */
+#define NFC_IP_DST_PT		0x0400
+/* Something else about the proto */
+#define NFC_IP_PROTO_UNKNOWN	0x2000
+
+/* IP Hooks */
+/* After promisc drops, checksum checks. */
+#define NF_IP_PRE_ROUTING	0
+/* If the packet is destined for this box. */
+#define NF_IP_LOCAL_IN		1
+/* If the packet is destined for another interface. */
+#define NF_IP_FORWARD		2
+/* Packets coming from a local process. */
+#define NF_IP_LOCAL_OUT		3
+/* Packets about to hit the wire. */
+#define NF_IP_POST_ROUTING	4
+#define NF_IP_NUMHOOKS		5
+#endif /* ! __KERNEL__ */
+
+enum nf_ip_hook_priorities {
+	NF_IP_PRI_FIRST = INT_MIN,
+	NF_IP_PRI_CONNTRACK_DEFRAG = -400,
+	NF_IP_PRI_RAW = -300,
+	NF_IP_PRI_SELINUX_FIRST = -225,
+	NF_IP_PRI_CONNTRACK = -200,
+	NF_IP_PRI_MANGLE = -150,
+	NF_IP_PRI_NAT_DST = -100,
+	NF_IP_PRI_FILTER = 0,
+	NF_IP_PRI_SECURITY = 50,
+	NF_IP_PRI_NAT_SRC = 100,
+	NF_IP_PRI_SELINUX_LAST = 225,
+	NF_IP_PRI_CONNTRACK_HELPER = 300,
+	NF_IP_PRI_CONNTRACK_CONFIRM = INT_MAX,
+	NF_IP_PRI_LAST = INT_MAX,
+};
+
+/* Arguments for setsockopt SOL_IP: */
+/* 2.0 firewalling went from 64 through 71 (and +256, +512, etc). */
+/* 2.2 firewalling (+ masq) went from 64 through 76 */
+/* 2.4 firewalling went 64 through 67. */
+#define SO_ORIGINAL_DST 80
+
+
+#endif /* _UAPI__LINUX_IP_NETFILTER_H */
diff --git a/include/uapi/linux/netfilter_ipv6.h b/include/uapi/linux/netfilter_ipv6.h
new file mode 100644
index 00000000000..12497c6c794
--- /dev/null
+++ b/include/uapi/linux/netfilter_ipv6.h
@@ -0,0 +1,79 @@
+/* IPv6-specific defines for netfilter. 
+ * (C)1998 Rusty Russell -- This code is GPL.
+ * (C)1999 David Jeffery
+ *   this header was blatantly ripped from netfilter_ipv4.h 
+ *   it's amazing what adding a bunch of 6s can do =8^)
+ */
+#ifndef _UAPI__LINUX_IP6_NETFILTER_H
+#define _UAPI__LINUX_IP6_NETFILTER_H
+
+
+#include <linux/netfilter.h>
+
+/* only for userspace compatibility */
+#ifndef __KERNEL__
+
+#include <limits.h> /* for INT_MIN, INT_MAX */
+
+/* IP Cache bits. */
+/* Src IP address. */
+#define NFC_IP6_SRC              0x0001
+/* Dest IP address. */
+#define NFC_IP6_DST              0x0002
+/* Input device. */
+#define NFC_IP6_IF_IN            0x0004
+/* Output device. */
+#define NFC_IP6_IF_OUT           0x0008
+/* TOS. */
+#define NFC_IP6_TOS              0x0010
+/* Protocol. */
+#define NFC_IP6_PROTO            0x0020
+/* IP options. */
+#define NFC_IP6_OPTIONS          0x0040
+/* Frag & flags. */
+#define NFC_IP6_FRAG             0x0080
+
+
+/* Per-protocol information: only matters if proto match. */
+/* TCP flags. */
+#define NFC_IP6_TCPFLAGS         0x0100
+/* Source port. */
+#define NFC_IP6_SRC_PT           0x0200
+/* Dest port. */
+#define NFC_IP6_DST_PT           0x0400
+/* Something else about the proto */
+#define NFC_IP6_PROTO_UNKNOWN    0x2000
+
+/* IP6 Hooks */
+/* After promisc drops, checksum checks. */
+#define NF_IP6_PRE_ROUTING	0
+/* If the packet is destined for this box. */
+#define NF_IP6_LOCAL_IN		1
+/* If the packet is destined for another interface. */
+#define NF_IP6_FORWARD		2
+/* Packets coming from a local process. */
+#define NF_IP6_LOCAL_OUT		3
+/* Packets about to hit the wire. */
+#define NF_IP6_POST_ROUTING	4
+#define NF_IP6_NUMHOOKS		5
+#endif /* ! __KERNEL__ */
+
+
+enum nf_ip6_hook_priorities {
+	NF_IP6_PRI_FIRST = INT_MIN,
+	NF_IP6_PRI_CONNTRACK_DEFRAG = -400,
+	NF_IP6_PRI_RAW = -300,
+	NF_IP6_PRI_SELINUX_FIRST = -225,
+	NF_IP6_PRI_CONNTRACK = -200,
+	NF_IP6_PRI_MANGLE = -150,
+	NF_IP6_PRI_NAT_DST = -100,
+	NF_IP6_PRI_FILTER = 0,
+	NF_IP6_PRI_SECURITY = 50,
+	NF_IP6_PRI_NAT_SRC = 100,
+	NF_IP6_PRI_SELINUX_LAST = 225,
+	NF_IP6_PRI_CONNTRACK_HELPER = 300,
+	NF_IP6_PRI_LAST = INT_MAX,
+};
+
+
+#endif /* _UAPI__LINUX_IP6_NETFILTER_H */
diff --git a/include/uapi/linux/netlink.h b/include/uapi/linux/netlink.h
new file mode 100644
index 00000000000..78d5b8a546d
--- /dev/null
+++ b/include/uapi/linux/netlink.h
@@ -0,0 +1,153 @@
+#ifndef _UAPI__LINUX_NETLINK_H
+#define _UAPI__LINUX_NETLINK_H
+
+#include <linux/socket.h> /* for __kernel_sa_family_t */
+#include <linux/types.h>
+
+#define NETLINK_ROUTE		0	/* Routing/device hook				*/
+#define NETLINK_UNUSED		1	/* Unused number				*/
+#define NETLINK_USERSOCK	2	/* Reserved for user mode socket protocols 	*/
+#define NETLINK_FIREWALL	3	/* Unused number, formerly ip_queue		*/
+#define NETLINK_SOCK_DIAG	4	/* socket monitoring				*/
+#define NETLINK_NFLOG		5	/* netfilter/iptables ULOG */
+#define NETLINK_XFRM		6	/* ipsec */
+#define NETLINK_SELINUX		7	/* SELinux event notifications */
+#define NETLINK_ISCSI		8	/* Open-iSCSI */
+#define NETLINK_AUDIT		9	/* auditing */
+#define NETLINK_FIB_LOOKUP	10	
+#define NETLINK_CONNECTOR	11
+#define NETLINK_NETFILTER	12	/* netfilter subsystem */
+#define NETLINK_IP6_FW		13
+#define NETLINK_DNRTMSG		14	/* DECnet routing messages */
+#define NETLINK_KOBJECT_UEVENT	15	/* Kernel messages to userspace */
+#define NETLINK_GENERIC		16
+/* leave room for NETLINK_DM (DM Events) */
+#define NETLINK_SCSITRANSPORT	18	/* SCSI Transports */
+#define NETLINK_ECRYPTFS	19
+#define NETLINK_RDMA		20
+#define NETLINK_CRYPTO		21	/* Crypto layer */
+
+#define NETLINK_INET_DIAG	NETLINK_SOCK_DIAG
+
+#define MAX_LINKS 32		
+
+struct sockaddr_nl {
+	__kernel_sa_family_t	nl_family;	/* AF_NETLINK	*/
+	unsigned short	nl_pad;		/* zero		*/
+	__u32		nl_pid;		/* port ID	*/
+       	__u32		nl_groups;	/* multicast groups mask */
+};
+
+struct nlmsghdr {
+	__u32		nlmsg_len;	/* Length of message including header */
+	__u16		nlmsg_type;	/* Message content */
+	__u16		nlmsg_flags;	/* Additional flags */
+	__u32		nlmsg_seq;	/* Sequence number */
+	__u32		nlmsg_pid;	/* Sending process port ID */
+};
+
+/* Flags values */
+
+#define NLM_F_REQUEST		1	/* It is request message. 	*/
+#define NLM_F_MULTI		2	/* Multipart message, terminated by NLMSG_DONE */
+#define NLM_F_ACK		4	/* Reply with ack, with zero or error code */
+#define NLM_F_ECHO		8	/* Echo this request 		*/
+#define NLM_F_DUMP_INTR		16	/* Dump was inconsistent due to sequence change */
+
+/* Modifiers to GET request */
+#define NLM_F_ROOT	0x100	/* specify tree	root	*/
+#define NLM_F_MATCH	0x200	/* return all matching	*/
+#define NLM_F_ATOMIC	0x400	/* atomic GET		*/
+#define NLM_F_DUMP	(NLM_F_ROOT|NLM_F_MATCH)
+
+/* Modifiers to NEW request */
+#define NLM_F_REPLACE	0x100	/* Override existing		*/
+#define NLM_F_EXCL	0x200	/* Do not touch, if it exists	*/
+#define NLM_F_CREATE	0x400	/* Create, if it does not exist	*/
+#define NLM_F_APPEND	0x800	/* Add to end of list		*/
+
+/*
+   4.4BSD ADD		NLM_F_CREATE|NLM_F_EXCL
+   4.4BSD CHANGE	NLM_F_REPLACE
+
+   True CHANGE		NLM_F_CREATE|NLM_F_REPLACE
+   Append		NLM_F_CREATE
+   Check		NLM_F_EXCL
+ */
+
+#define NLMSG_ALIGNTO	4U
+#define NLMSG_ALIGN(len) ( ((len)+NLMSG_ALIGNTO-1) & ~(NLMSG_ALIGNTO-1) )
+#define NLMSG_HDRLEN	 ((int) NLMSG_ALIGN(sizeof(struct nlmsghdr)))
+#define NLMSG_LENGTH(len) ((len)+NLMSG_ALIGN(NLMSG_HDRLEN))
+#define NLMSG_SPACE(len) NLMSG_ALIGN(NLMSG_LENGTH(len))
+#define NLMSG_DATA(nlh)  ((void*)(((char*)nlh) + NLMSG_LENGTH(0)))
+#define NLMSG_NEXT(nlh,len)	 ((len) -= NLMSG_ALIGN((nlh)->nlmsg_len), \
+				  (struct nlmsghdr*)(((char*)(nlh)) + NLMSG_ALIGN((nlh)->nlmsg_len)))
+#define NLMSG_OK(nlh,len) ((len) >= (int)sizeof(struct nlmsghdr) && \
+			   (nlh)->nlmsg_len >= sizeof(struct nlmsghdr) && \
+			   (nlh)->nlmsg_len <= (len))
+#define NLMSG_PAYLOAD(nlh,len) ((nlh)->nlmsg_len - NLMSG_SPACE((len)))
+
+#define NLMSG_NOOP		0x1	/* Nothing.		*/
+#define NLMSG_ERROR		0x2	/* Error		*/
+#define NLMSG_DONE		0x3	/* End of a dump	*/
+#define NLMSG_OVERRUN		0x4	/* Data lost		*/
+
+#define NLMSG_MIN_TYPE		0x10	/* < 0x10: reserved control messages */
+
+struct nlmsgerr {
+	int		error;
+	struct nlmsghdr msg;
+};
+
+#define NETLINK_ADD_MEMBERSHIP	1
+#define NETLINK_DROP_MEMBERSHIP	2
+#define NETLINK_PKTINFO		3
+#define NETLINK_BROADCAST_ERROR	4
+#define NETLINK_NO_ENOBUFS	5
+
+struct nl_pktinfo {
+	__u32	group;
+};
+
+#define NET_MAJOR 36		/* Major 36 is reserved for networking 						*/
+
+enum {
+	NETLINK_UNCONNECTED = 0,
+	NETLINK_CONNECTED,
+};
+
+/*
+ *  <------- NLA_HDRLEN ------> <-- NLA_ALIGN(payload)-->
+ * +---------------------+- - -+- - - - - - - - - -+- - -+
+ * |        Header       | Pad |     Payload       | Pad |
+ * |   (struct nlattr)   | ing |                   | ing |
+ * +---------------------+- - -+- - - - - - - - - -+- - -+
+ *  <-------------- nlattr->nla_len -------------->
+ */
+
+struct nlattr {
+	__u16           nla_len;
+	__u16           nla_type;
+};
+
+/*
+ * nla_type (16 bits)
+ * +---+---+-------------------------------+
+ * | N | O | Attribute Type                |
+ * +---+---+-------------------------------+
+ * N := Carries nested attributes
+ * O := Payload stored in network byte order
+ *
+ * Note: The N and O flag are mutually exclusive.
+ */
+#define NLA_F_NESTED		(1 << 15)
+#define NLA_F_NET_BYTEORDER	(1 << 14)
+#define NLA_TYPE_MASK		~(NLA_F_NESTED | NLA_F_NET_BYTEORDER)
+
+#define NLA_ALIGNTO		4
+#define NLA_ALIGN(len)		(((len) + NLA_ALIGNTO - 1) & ~(NLA_ALIGNTO - 1))
+#define NLA_HDRLEN		((int) NLA_ALIGN(sizeof(struct nlattr)))
+
+
+#endif /* _UAPI__LINUX_NETLINK_H */
diff --git a/include/uapi/linux/netrom.h b/include/uapi/linux/netrom.h
new file mode 100644
index 00000000000..af7313cc9cb
--- /dev/null
+++ b/include/uapi/linux/netrom.h
@@ -0,0 +1,36 @@
+/*
+ * These are the public elements of the Linux kernel NET/ROM implementation.
+ * For kernel AX.25 see the file ax25.h. This file requires ax25.h for the
+ * definition of the ax25_address structure.
+ */
+
+#ifndef	NETROM_KERNEL_H
+#define	NETROM_KERNEL_H
+
+#include <linux/ax25.h>
+
+#define NETROM_MTU	236
+
+#define NETROM_T1	1
+#define NETROM_T2	2
+#define NETROM_N2	3
+#define	NETROM_T4	6
+#define	NETROM_IDLE	7
+
+#define	SIOCNRDECOBS		(SIOCPROTOPRIVATE+2)
+
+struct nr_route_struct {
+#define	NETROM_NEIGH	0
+#define	NETROM_NODE	1
+	int		type;
+	ax25_address	callsign;
+	char		device[16];
+	unsigned int	quality;
+	char		mnemonic[7];
+	ax25_address	neighbour;
+	unsigned int	obs_count;
+	unsigned int	ndigis;
+	ax25_address	digipeaters[AX25_MAX_DIGIS];
+};
+
+#endif
diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h
new file mode 100644
index 00000000000..d908d17da56
--- /dev/null
+++ b/include/uapi/linux/nfc.h
@@ -0,0 +1,197 @@
+/*
+ * Copyright (C) 2011 Instituto Nokia de Tecnologia
+ *
+ * Authors:
+ *    Lauro Ramos Venancio <lauro.venancio@openbossa.org>
+ *    Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __LINUX_NFC_H
+#define __LINUX_NFC_H
+
+#include <linux/types.h>
+#include <linux/socket.h>
+
+#define NFC_GENL_NAME "nfc"
+#define NFC_GENL_VERSION 1
+
+#define NFC_GENL_MCAST_EVENT_NAME "events"
+
+/**
+ * enum nfc_commands - supported nfc commands
+ *
+ * @NFC_CMD_UNSPEC: unspecified command
+ *
+ * @NFC_CMD_GET_DEVICE: request information about a device (requires
+ *	%NFC_ATTR_DEVICE_INDEX) or dump request to get a list of all nfc devices
+ * @NFC_CMD_DEV_UP: turn on the nfc device
+ *	(requires %NFC_ATTR_DEVICE_INDEX)
+ * @NFC_CMD_DEV_DOWN: turn off the nfc device
+ *	(requires %NFC_ATTR_DEVICE_INDEX)
+ * @NFC_CMD_START_POLL: start polling for targets using the given protocols
+ *	(requires %NFC_ATTR_DEVICE_INDEX and %NFC_ATTR_PROTOCOLS)
+ * @NFC_CMD_STOP_POLL: stop polling for targets (requires
+ *	%NFC_ATTR_DEVICE_INDEX)
+ * @NFC_CMD_GET_TARGET: dump all targets found by the previous poll (requires
+ *	%NFC_ATTR_DEVICE_INDEX)
+ * @NFC_EVENT_TARGETS_FOUND: event emitted when a new target is found
+ *	(it sends %NFC_ATTR_DEVICE_INDEX)
+ * @NFC_EVENT_DEVICE_ADDED: event emitted when a new device is registred
+ *	(it sends %NFC_ATTR_DEVICE_NAME, %NFC_ATTR_DEVICE_INDEX and
+ *	%NFC_ATTR_PROTOCOLS)
+ * @NFC_EVENT_DEVICE_REMOVED: event emitted when a device is removed
+ *	(it sends %NFC_ATTR_DEVICE_INDEX)
+ * @NFC_EVENT_TM_ACTIVATED: event emitted when the adapter is activated in
+ *      target mode.
+ * @NFC_EVENT_DEVICE_DEACTIVATED: event emitted when the adapter is deactivated
+ *      from target mode.
+ */
+enum nfc_commands {
+	NFC_CMD_UNSPEC,
+	NFC_CMD_GET_DEVICE,
+	NFC_CMD_DEV_UP,
+	NFC_CMD_DEV_DOWN,
+	NFC_CMD_DEP_LINK_UP,
+	NFC_CMD_DEP_LINK_DOWN,
+	NFC_CMD_START_POLL,
+	NFC_CMD_STOP_POLL,
+	NFC_CMD_GET_TARGET,
+	NFC_EVENT_TARGETS_FOUND,
+	NFC_EVENT_DEVICE_ADDED,
+	NFC_EVENT_DEVICE_REMOVED,
+	NFC_EVENT_TARGET_LOST,
+	NFC_EVENT_TM_ACTIVATED,
+	NFC_EVENT_TM_DEACTIVATED,
+/* private: internal use only */
+	__NFC_CMD_AFTER_LAST
+};
+#define NFC_CMD_MAX (__NFC_CMD_AFTER_LAST - 1)
+
+/**
+ * enum nfc_attrs - supported nfc attributes
+ *
+ * @NFC_ATTR_UNSPEC: unspecified attribute
+ *
+ * @NFC_ATTR_DEVICE_INDEX: index of nfc device
+ * @NFC_ATTR_DEVICE_NAME: device name, max 8 chars
+ * @NFC_ATTR_PROTOCOLS: nfc protocols - bitwise or-ed combination from
+ *	NFC_PROTO_*_MASK constants
+ * @NFC_ATTR_TARGET_INDEX: index of the nfc target
+ * @NFC_ATTR_TARGET_SENS_RES: NFC-A targets extra information such as NFCID
+ * @NFC_ATTR_TARGET_SEL_RES: NFC-A targets extra information (useful if the
+ *	target is not NFC-Forum compliant)
+ * @NFC_ATTR_TARGET_NFCID1: NFC-A targets identifier, max 10 bytes
+ * @NFC_ATTR_TARGET_SENSB_RES: NFC-B targets extra information, max 12 bytes
+ * @NFC_ATTR_TARGET_SENSF_RES: NFC-F targets extra information, max 18 bytes
+ * @NFC_ATTR_COMM_MODE: Passive or active mode
+ * @NFC_ATTR_RF_MODE: Initiator or target
+ * @NFC_ATTR_IM_PROTOCOLS: Initiator mode protocols to poll for
+ * @NFC_ATTR_TM_PROTOCOLS: Target mode protocols to listen for
+ */
+enum nfc_attrs {
+	NFC_ATTR_UNSPEC,
+	NFC_ATTR_DEVICE_INDEX,
+	NFC_ATTR_DEVICE_NAME,
+	NFC_ATTR_PROTOCOLS,
+	NFC_ATTR_TARGET_INDEX,
+	NFC_ATTR_TARGET_SENS_RES,
+	NFC_ATTR_TARGET_SEL_RES,
+	NFC_ATTR_TARGET_NFCID1,
+	NFC_ATTR_TARGET_SENSB_RES,
+	NFC_ATTR_TARGET_SENSF_RES,
+	NFC_ATTR_COMM_MODE,
+	NFC_ATTR_RF_MODE,
+	NFC_ATTR_DEVICE_POWERED,
+	NFC_ATTR_IM_PROTOCOLS,
+	NFC_ATTR_TM_PROTOCOLS,
+/* private: internal use only */
+	__NFC_ATTR_AFTER_LAST
+};
+#define NFC_ATTR_MAX (__NFC_ATTR_AFTER_LAST - 1)
+
+#define NFC_DEVICE_NAME_MAXSIZE 8
+#define NFC_NFCID1_MAXSIZE 10
+#define NFC_SENSB_RES_MAXSIZE 12
+#define NFC_SENSF_RES_MAXSIZE 18
+#define NFC_GB_MAXSIZE        48
+
+/* NFC protocols */
+#define NFC_PROTO_JEWEL		1
+#define NFC_PROTO_MIFARE	2
+#define NFC_PROTO_FELICA	3
+#define NFC_PROTO_ISO14443	4
+#define NFC_PROTO_NFC_DEP	5
+#define NFC_PROTO_ISO14443_B	6
+
+#define NFC_PROTO_MAX		7
+
+/* NFC communication modes */
+#define NFC_COMM_ACTIVE  0
+#define NFC_COMM_PASSIVE 1
+
+/* NFC RF modes */
+#define NFC_RF_INITIATOR 0
+#define NFC_RF_TARGET    1
+#define NFC_RF_NONE      2
+
+/* NFC protocols masks used in bitsets */
+#define NFC_PROTO_JEWEL_MASK      (1 << NFC_PROTO_JEWEL)
+#define NFC_PROTO_MIFARE_MASK     (1 << NFC_PROTO_MIFARE)
+#define NFC_PROTO_FELICA_MASK	  (1 << NFC_PROTO_FELICA)
+#define NFC_PROTO_ISO14443_MASK	  (1 << NFC_PROTO_ISO14443)
+#define NFC_PROTO_NFC_DEP_MASK	  (1 << NFC_PROTO_NFC_DEP)
+#define NFC_PROTO_ISO14443_B_MASK (1 << NFC_PROTO_ISO14443_B)
+
+struct sockaddr_nfc {
+	sa_family_t sa_family;
+	__u32 dev_idx;
+	__u32 target_idx;
+	__u32 nfc_protocol;
+};
+
+#define NFC_LLCP_MAX_SERVICE_NAME 63
+struct sockaddr_nfc_llcp {
+	sa_family_t sa_family;
+	__u32 dev_idx;
+	__u32 target_idx;
+	__u32 nfc_protocol;
+	__u8 dsap; /* Destination SAP, if known */
+	__u8 ssap; /* Source SAP to be bound to */
+	char service_name[NFC_LLCP_MAX_SERVICE_NAME]; /* Service name URI */;
+	size_t service_name_len;
+};
+
+/* NFC socket protocols */
+#define NFC_SOCKPROTO_RAW	0
+#define NFC_SOCKPROTO_LLCP	1
+#define NFC_SOCKPROTO_MAX	2
+
+#define NFC_HEADER_SIZE 1
+
+/**
+ * Pseudo-header info for raw socket packets
+ * First byte is the adapter index
+ * Second byte contains flags
+ *  - 0x01 - Direction (0=RX, 1=TX)
+ *  - 0x02-0x80 - Reserved
+ **/
+#define NFC_LLCP_RAW_HEADER_SIZE	2
+#define NFC_LLCP_DIRECTION_RX		0x00
+#define NFC_LLCP_DIRECTION_TX		0x01
+
+#endif /*__LINUX_NFC_H */
diff --git a/include/uapi/linux/nfs.h b/include/uapi/linux/nfs.h
new file mode 100644
index 00000000000..5199a36dd57
--- /dev/null
+++ b/include/uapi/linux/nfs.h
@@ -0,0 +1,131 @@
+/*
+ * NFS protocol definitions
+ *
+ * This file contains constants mostly for Version 2 of the protocol,
+ * but also has a couple of NFSv3 bits in (notably the error codes).
+ */
+#ifndef _UAPI_LINUX_NFS_H
+#define _UAPI_LINUX_NFS_H
+
+#define NFS_PROGRAM	100003
+#define NFS_PORT	2049
+#define NFS_MAXDATA	8192
+#define NFS_MAXPATHLEN	1024
+#define NFS_MAXNAMLEN	255
+#define NFS_MAXGROUPS	16
+#define NFS_FHSIZE	32
+#define NFS_COOKIESIZE	4
+#define NFS_FIFO_DEV	(-1)
+#define NFSMODE_FMT	0170000
+#define NFSMODE_DIR	0040000
+#define NFSMODE_CHR	0020000
+#define NFSMODE_BLK	0060000
+#define NFSMODE_REG	0100000
+#define NFSMODE_LNK	0120000
+#define NFSMODE_SOCK	0140000
+#define NFSMODE_FIFO	0010000
+
+#define NFS_MNT_PROGRAM		100005
+#define NFS_MNT_VERSION		1
+#define NFS_MNT3_VERSION	3
+
+#define NFS_PIPE_DIRNAME "nfs"
+
+/*
+ * NFS stats. The good thing with these values is that NFSv3 errors are
+ * a superset of NFSv2 errors (with the exception of NFSERR_WFLUSH which
+ * no-one uses anyway), so we can happily mix code as long as we make sure
+ * no NFSv3 errors are returned to NFSv2 clients.
+ * Error codes that have a `--' in the v2 column are not part of the
+ * standard, but seem to be widely used nevertheless.
+ */
+ enum nfs_stat {
+	NFS_OK = 0,			/* v2 v3 v4 */
+	NFSERR_PERM = 1,		/* v2 v3 v4 */
+	NFSERR_NOENT = 2,		/* v2 v3 v4 */
+	NFSERR_IO = 5,			/* v2 v3 v4 */
+	NFSERR_NXIO = 6,		/* v2 v3 v4 */
+	NFSERR_EAGAIN = 11,		/* v2 v3 */
+	NFSERR_ACCES = 13,		/* v2 v3 v4 */
+	NFSERR_EXIST = 17,		/* v2 v3 v4 */
+	NFSERR_XDEV = 18,		/*    v3 v4 */
+	NFSERR_NODEV = 19,		/* v2 v3 v4 */
+	NFSERR_NOTDIR = 20,		/* v2 v3 v4 */
+	NFSERR_ISDIR = 21,		/* v2 v3 v4 */
+	NFSERR_INVAL = 22,		/* v2 v3 v4 */
+	NFSERR_FBIG = 27,		/* v2 v3 v4 */
+	NFSERR_NOSPC = 28,		/* v2 v3 v4 */
+	NFSERR_ROFS = 30,		/* v2 v3 v4 */
+	NFSERR_MLINK = 31,		/*    v3 v4 */
+	NFSERR_OPNOTSUPP = 45,		/* v2 v3 */
+	NFSERR_NAMETOOLONG = 63,	/* v2 v3 v4 */
+	NFSERR_NOTEMPTY = 66,		/* v2 v3 v4 */
+	NFSERR_DQUOT = 69,		/* v2 v3 v4 */
+	NFSERR_STALE = 70,		/* v2 v3 v4 */
+	NFSERR_REMOTE = 71,		/* v2 v3 */
+	NFSERR_WFLUSH = 99,		/* v2    */
+	NFSERR_BADHANDLE = 10001,	/*    v3 v4 */
+	NFSERR_NOT_SYNC = 10002,	/*    v3 */
+	NFSERR_BAD_COOKIE = 10003,	/*    v3 v4 */
+	NFSERR_NOTSUPP = 10004,		/*    v3 v4 */
+	NFSERR_TOOSMALL = 10005,	/*    v3 v4 */
+	NFSERR_SERVERFAULT = 10006,	/*    v3 v4 */
+	NFSERR_BADTYPE = 10007,		/*    v3 v4 */
+	NFSERR_JUKEBOX = 10008,		/*    v3 v4 */
+	NFSERR_SAME = 10009,		/*       v4 */
+	NFSERR_DENIED = 10010,		/*       v4 */
+	NFSERR_EXPIRED = 10011,		/*       v4 */
+	NFSERR_LOCKED = 10012,		/*       v4 */
+	NFSERR_GRACE = 10013,		/*       v4 */
+	NFSERR_FHEXPIRED = 10014,	/*       v4 */
+	NFSERR_SHARE_DENIED = 10015,	/*       v4 */
+	NFSERR_WRONGSEC = 10016,	/*       v4 */
+	NFSERR_CLID_INUSE = 10017,	/*       v4 */
+	NFSERR_RESOURCE = 10018,	/*       v4 */
+	NFSERR_MOVED = 10019,		/*       v4 */
+	NFSERR_NOFILEHANDLE = 10020,	/*       v4 */
+	NFSERR_MINOR_VERS_MISMATCH = 10021,   /* v4 */
+	NFSERR_STALE_CLIENTID = 10022,	/*       v4 */
+	NFSERR_STALE_STATEID = 10023,   /*       v4 */
+	NFSERR_OLD_STATEID = 10024,     /*       v4 */
+	NFSERR_BAD_STATEID = 10025,     /*       v4 */  
+	NFSERR_BAD_SEQID = 10026,	/*       v4 */
+	NFSERR_NOT_SAME = 10027,	/*       v4 */
+	NFSERR_LOCK_RANGE = 10028,	/*       v4 */
+	NFSERR_SYMLINK = 10029,		/*       v4 */
+	NFSERR_RESTOREFH = 10030,	/*       v4 */
+	NFSERR_LEASE_MOVED = 10031,	/*       v4 */
+	NFSERR_ATTRNOTSUPP = 10032,	/*       v4 */
+	NFSERR_NO_GRACE = 10033,	/*       v4 */
+	NFSERR_RECLAIM_BAD = 10034,	/*       v4 */
+	NFSERR_RECLAIM_CONFLICT = 10035,/*       v4 */
+	NFSERR_BAD_XDR = 10036,		/*       v4 */
+	NFSERR_LOCKS_HELD = 10037,	/*       v4 */
+	NFSERR_OPENMODE = 10038,       /*       v4 */
+	NFSERR_BADOWNER = 10039,       /*       v4 */
+	NFSERR_BADCHAR = 10040,        /*       v4 */
+	NFSERR_BADNAME = 10041,        /*       v4 */
+	NFSERR_BAD_RANGE = 10042,      /*       v4 */
+	NFSERR_LOCK_NOTSUPP = 10043,   /*       v4 */
+	NFSERR_OP_ILLEGAL = 10044,     /*       v4 */
+	NFSERR_DEADLOCK = 10045,       /*       v4 */
+	NFSERR_FILE_OPEN = 10046,      /*       v4 */
+	NFSERR_ADMIN_REVOKED = 10047,  /*       v4 */
+	NFSERR_CB_PATH_DOWN = 10048,   /*       v4 */
+};
+
+/* NFSv2 file types - beware, these are not the same in NFSv3 */
+
+enum nfs_ftype {
+	NFNON = 0,
+	NFREG = 1,
+	NFDIR = 2,
+	NFBLK = 3,
+	NFCHR = 4,
+	NFLNK = 5,
+	NFSOCK = 6,
+	NFBAD = 7,
+	NFFIFO = 8
+};
+
+#endif /* _UAPI_LINUX_NFS_H */
diff --git a/include/uapi/linux/nfs2.h b/include/uapi/linux/nfs2.h
new file mode 100644
index 00000000000..fde24b30cc9
--- /dev/null
+++ b/include/uapi/linux/nfs2.h
@@ -0,0 +1,67 @@
+/*
+ * NFS protocol definitions
+ *
+ * This file contains constants for Version 2 of the protocol.
+ */
+#ifndef _LINUX_NFS2_H
+#define _LINUX_NFS2_H
+
+#define NFS2_PORT	2049
+#define NFS2_MAXDATA	8192
+#define NFS2_MAXPATHLEN	1024
+#define NFS2_MAXNAMLEN	255
+#define NFS2_MAXGROUPS	16
+#define NFS2_FHSIZE	32
+#define NFS2_COOKIESIZE	4
+#define NFS2_FIFO_DEV	(-1)
+#define NFS2MODE_FMT	0170000
+#define NFS2MODE_DIR	0040000
+#define NFS2MODE_CHR	0020000
+#define NFS2MODE_BLK	0060000
+#define NFS2MODE_REG	0100000
+#define NFS2MODE_LNK	0120000
+#define NFS2MODE_SOCK	0140000
+#define NFS2MODE_FIFO	0010000
+
+
+/* NFSv2 file types - beware, these are not the same in NFSv3 */
+enum nfs2_ftype {
+	NF2NON = 0,
+	NF2REG = 1,
+	NF2DIR = 2,
+	NF2BLK = 3,
+	NF2CHR = 4,
+	NF2LNK = 5,
+	NF2SOCK = 6,
+	NF2BAD = 7,
+	NF2FIFO = 8
+};
+
+struct nfs2_fh {
+	char			data[NFS2_FHSIZE];
+};
+
+/*
+ * Procedure numbers for NFSv2
+ */
+#define NFS2_VERSION		2
+#define NFSPROC_NULL		0
+#define NFSPROC_GETATTR		1
+#define NFSPROC_SETATTR		2
+#define NFSPROC_ROOT		3
+#define NFSPROC_LOOKUP		4
+#define NFSPROC_READLINK	5
+#define NFSPROC_READ		6
+#define NFSPROC_WRITECACHE	7
+#define NFSPROC_WRITE		8
+#define NFSPROC_CREATE		9
+#define NFSPROC_REMOVE		10
+#define NFSPROC_RENAME		11
+#define NFSPROC_LINK		12
+#define NFSPROC_SYMLINK		13
+#define NFSPROC_MKDIR		14
+#define NFSPROC_RMDIR		15
+#define NFSPROC_READDIR		16
+#define NFSPROC_STATFS		17
+
+#endif /* _LINUX_NFS2_H */
diff --git a/include/uapi/linux/nfs3.h b/include/uapi/linux/nfs3.h
new file mode 100644
index 00000000000..231ef4e6982
--- /dev/null
+++ b/include/uapi/linux/nfs3.h
@@ -0,0 +1,97 @@
+/*
+ * NFSv3 protocol definitions
+ */
+#ifndef _UAPI_LINUX_NFS3_H
+#define _UAPI_LINUX_NFS3_H
+
+#define NFS3_PORT		2049
+#define NFS3_MAXDATA		32768
+#define NFS3_MAXPATHLEN		PATH_MAX
+#define NFS3_MAXNAMLEN		NAME_MAX
+#define NFS3_MAXGROUPS		16
+#define NFS3_FHSIZE		64
+#define NFS3_COOKIESIZE		4
+#define NFS3_CREATEVERFSIZE	8
+#define NFS3_COOKIEVERFSIZE	8
+#define NFS3_WRITEVERFSIZE	8
+#define NFS3_FIFO_DEV		(-1)
+#define NFS3MODE_FMT		0170000
+#define NFS3MODE_DIR		0040000
+#define NFS3MODE_CHR		0020000
+#define NFS3MODE_BLK		0060000
+#define NFS3MODE_REG		0100000
+#define NFS3MODE_LNK		0120000
+#define NFS3MODE_SOCK		0140000
+#define NFS3MODE_FIFO		0010000
+
+/* Flags for access() call */
+#define NFS3_ACCESS_READ	0x0001
+#define NFS3_ACCESS_LOOKUP	0x0002
+#define NFS3_ACCESS_MODIFY	0x0004
+#define NFS3_ACCESS_EXTEND	0x0008
+#define NFS3_ACCESS_DELETE	0x0010
+#define NFS3_ACCESS_EXECUTE	0x0020
+#define NFS3_ACCESS_FULL	0x003f
+
+/* Flags for create mode */
+enum nfs3_createmode {
+	NFS3_CREATE_UNCHECKED = 0,
+	NFS3_CREATE_GUARDED = 1,
+	NFS3_CREATE_EXCLUSIVE = 2
+};
+
+/* NFSv3 file system properties */
+#define NFS3_FSF_LINK		0x0001
+#define NFS3_FSF_SYMLINK	0x0002
+#define NFS3_FSF_HOMOGENEOUS	0x0008
+#define NFS3_FSF_CANSETTIME	0x0010
+/* Some shorthands. See fs/nfsd/nfs3proc.c */
+#define NFS3_FSF_DEFAULT	0x001B
+#define NFS3_FSF_BILLYBOY	0x0018
+#define NFS3_FSF_READONLY	0x0008
+
+enum nfs3_ftype {
+	NF3NON  = 0,
+	NF3REG  = 1,
+	NF3DIR  = 2,
+	NF3BLK  = 3,
+	NF3CHR  = 4,
+	NF3LNK  = 5,
+	NF3SOCK = 6,
+	NF3FIFO = 7,	/* changed from NFSv2 (was 8) */
+	NF3BAD  = 8
+};
+
+struct nfs3_fh {
+	unsigned short size;
+	unsigned char  data[NFS3_FHSIZE];
+};
+
+#define NFS3_VERSION		3
+#define NFS3PROC_NULL		0
+#define NFS3PROC_GETATTR	1
+#define NFS3PROC_SETATTR	2
+#define NFS3PROC_LOOKUP		3
+#define NFS3PROC_ACCESS		4
+#define NFS3PROC_READLINK	5
+#define NFS3PROC_READ		6
+#define NFS3PROC_WRITE		7
+#define NFS3PROC_CREATE		8
+#define NFS3PROC_MKDIR		9
+#define NFS3PROC_SYMLINK	10
+#define NFS3PROC_MKNOD		11
+#define NFS3PROC_REMOVE		12
+#define NFS3PROC_RMDIR		13
+#define NFS3PROC_RENAME		14
+#define NFS3PROC_LINK		15
+#define NFS3PROC_READDIR	16
+#define NFS3PROC_READDIRPLUS	17
+#define NFS3PROC_FSSTAT		18
+#define NFS3PROC_FSINFO		19
+#define NFS3PROC_PATHCONF	20
+#define NFS3PROC_COMMIT		21
+
+#define NFS_MNT3_VERSION	3
+ 
+
+#endif /* _UAPI_LINUX_NFS3_H */
diff --git a/include/uapi/linux/nfs4.h b/include/uapi/linux/nfs4.h
new file mode 100644
index 00000000000..788128ebac4
--- /dev/null
+++ b/include/uapi/linux/nfs4.h
@@ -0,0 +1,178 @@
+/*
+ *  include/linux/nfs4.h
+ *
+ *  NFSv4 protocol definitions.
+ *
+ *  Copyright (c) 2002 The Regents of the University of Michigan.
+ *  All rights reserved.
+ *
+ *  Kendrick Smith <kmsmith@umich.edu>
+ *  Andy Adamson   <andros@umich.edu>
+ */
+
+#ifndef _UAPI_LINUX_NFS4_H
+#define _UAPI_LINUX_NFS4_H
+
+#include <linux/types.h>
+
+#define NFS4_BITMAP_SIZE	2
+#define NFS4_VERIFIER_SIZE	8
+#define NFS4_STATEID_SEQID_SIZE 4
+#define NFS4_STATEID_OTHER_SIZE 12
+#define NFS4_STATEID_SIZE	(NFS4_STATEID_SEQID_SIZE + NFS4_STATEID_OTHER_SIZE)
+#define NFS4_FHSIZE		128
+#define NFS4_MAXPATHLEN		PATH_MAX
+#define NFS4_MAXNAMLEN		NAME_MAX
+#define NFS4_OPAQUE_LIMIT	1024
+#define NFS4_MAX_SESSIONID_LEN	16
+
+#define NFS4_ACCESS_READ        0x0001
+#define NFS4_ACCESS_LOOKUP      0x0002
+#define NFS4_ACCESS_MODIFY      0x0004
+#define NFS4_ACCESS_EXTEND      0x0008
+#define NFS4_ACCESS_DELETE      0x0010
+#define NFS4_ACCESS_EXECUTE     0x0020
+
+#define NFS4_FH_PERSISTENT		0x0000
+#define NFS4_FH_NOEXPIRE_WITH_OPEN	0x0001
+#define NFS4_FH_VOLATILE_ANY		0x0002
+#define NFS4_FH_VOL_MIGRATION		0x0004
+#define NFS4_FH_VOL_RENAME		0x0008
+
+#define NFS4_OPEN_RESULT_CONFIRM 0x0002
+#define NFS4_OPEN_RESULT_LOCKTYPE_POSIX 0x0004
+
+#define NFS4_SHARE_ACCESS_MASK	0x000F
+#define NFS4_SHARE_ACCESS_READ	0x0001
+#define NFS4_SHARE_ACCESS_WRITE	0x0002
+#define NFS4_SHARE_ACCESS_BOTH	0x0003
+#define NFS4_SHARE_DENY_READ	0x0001
+#define NFS4_SHARE_DENY_WRITE	0x0002
+#define NFS4_SHARE_DENY_BOTH	0x0003
+
+/* nfs41 */
+#define NFS4_SHARE_WANT_MASK		0xFF00
+#define NFS4_SHARE_WANT_NO_PREFERENCE	0x0000
+#define NFS4_SHARE_WANT_READ_DELEG	0x0100
+#define NFS4_SHARE_WANT_WRITE_DELEG	0x0200
+#define NFS4_SHARE_WANT_ANY_DELEG	0x0300
+#define NFS4_SHARE_WANT_NO_DELEG	0x0400
+#define NFS4_SHARE_WANT_CANCEL		0x0500
+
+#define NFS4_SHARE_WHEN_MASK		0xF0000
+#define NFS4_SHARE_SIGNAL_DELEG_WHEN_RESRC_AVAIL	0x10000
+#define NFS4_SHARE_PUSH_DELEG_WHEN_UNCONTENDED		0x20000
+
+#define NFS4_CDFC4_FORE	0x1
+#define NFS4_CDFC4_BACK 0x2
+#define NFS4_CDFC4_BOTH 0x3
+#define NFS4_CDFC4_FORE_OR_BOTH 0x3
+#define NFS4_CDFC4_BACK_OR_BOTH 0x7
+
+#define NFS4_CDFS4_FORE 0x1
+#define NFS4_CDFS4_BACK 0x2
+#define NFS4_CDFS4_BOTH 0x3
+
+#define NFS4_SET_TO_SERVER_TIME	0
+#define NFS4_SET_TO_CLIENT_TIME	1
+
+#define NFS4_ACE_ACCESS_ALLOWED_ACE_TYPE 0
+#define NFS4_ACE_ACCESS_DENIED_ACE_TYPE  1
+#define NFS4_ACE_SYSTEM_AUDIT_ACE_TYPE   2
+#define NFS4_ACE_SYSTEM_ALARM_ACE_TYPE   3
+
+#define ACL4_SUPPORT_ALLOW_ACL 0x01
+#define ACL4_SUPPORT_DENY_ACL  0x02
+#define ACL4_SUPPORT_AUDIT_ACL 0x04
+#define ACL4_SUPPORT_ALARM_ACL 0x08
+
+#define NFS4_ACE_FILE_INHERIT_ACE             0x00000001
+#define NFS4_ACE_DIRECTORY_INHERIT_ACE        0x00000002
+#define NFS4_ACE_NO_PROPAGATE_INHERIT_ACE     0x00000004
+#define NFS4_ACE_INHERIT_ONLY_ACE             0x00000008
+#define NFS4_ACE_SUCCESSFUL_ACCESS_ACE_FLAG   0x00000010
+#define NFS4_ACE_FAILED_ACCESS_ACE_FLAG       0x00000020
+#define NFS4_ACE_IDENTIFIER_GROUP             0x00000040
+
+#define NFS4_ACE_READ_DATA                    0x00000001
+#define NFS4_ACE_LIST_DIRECTORY               0x00000001
+#define NFS4_ACE_WRITE_DATA                   0x00000002
+#define NFS4_ACE_ADD_FILE                     0x00000002
+#define NFS4_ACE_APPEND_DATA                  0x00000004
+#define NFS4_ACE_ADD_SUBDIRECTORY             0x00000004
+#define NFS4_ACE_READ_NAMED_ATTRS             0x00000008
+#define NFS4_ACE_WRITE_NAMED_ATTRS            0x00000010
+#define NFS4_ACE_EXECUTE                      0x00000020
+#define NFS4_ACE_DELETE_CHILD                 0x00000040
+#define NFS4_ACE_READ_ATTRIBUTES              0x00000080
+#define NFS4_ACE_WRITE_ATTRIBUTES             0x00000100
+#define NFS4_ACE_DELETE                       0x00010000
+#define NFS4_ACE_READ_ACL                     0x00020000
+#define NFS4_ACE_WRITE_ACL                    0x00040000
+#define NFS4_ACE_WRITE_OWNER                  0x00080000
+#define NFS4_ACE_SYNCHRONIZE                  0x00100000
+#define NFS4_ACE_GENERIC_READ                 0x00120081
+#define NFS4_ACE_GENERIC_WRITE                0x00160106
+#define NFS4_ACE_GENERIC_EXECUTE              0x001200A0
+#define NFS4_ACE_MASK_ALL                     0x001F01FF
+
+#define EXCHGID4_FLAG_SUPP_MOVED_REFER		0x00000001
+#define EXCHGID4_FLAG_SUPP_MOVED_MIGR		0x00000002
+#define EXCHGID4_FLAG_BIND_PRINC_STATEID	0x00000100
+
+#define EXCHGID4_FLAG_USE_NON_PNFS		0x00010000
+#define EXCHGID4_FLAG_USE_PNFS_MDS		0x00020000
+#define EXCHGID4_FLAG_USE_PNFS_DS		0x00040000
+#define EXCHGID4_FLAG_MASK_PNFS			0x00070000
+
+#define EXCHGID4_FLAG_UPD_CONFIRMED_REC_A	0x40000000
+#define EXCHGID4_FLAG_CONFIRMED_R		0x80000000
+/*
+ * Since the validity of these bits depends on whether
+ * they're set in the argument or response, have separate
+ * invalid flag masks for arg (_A) and resp (_R).
+ */
+#define EXCHGID4_FLAG_MASK_A			0x40070103
+#define EXCHGID4_FLAG_MASK_R			0x80070103
+
+#define SEQ4_STATUS_CB_PATH_DOWN		0x00000001
+#define SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRING	0x00000002
+#define SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRED	0x00000004
+#define SEQ4_STATUS_EXPIRED_ALL_STATE_REVOKED	0x00000008
+#define SEQ4_STATUS_EXPIRED_SOME_STATE_REVOKED	0x00000010
+#define SEQ4_STATUS_ADMIN_STATE_REVOKED		0x00000020
+#define SEQ4_STATUS_RECALLABLE_STATE_REVOKED	0x00000040
+#define SEQ4_STATUS_LEASE_MOVED			0x00000080
+#define SEQ4_STATUS_RESTART_RECLAIM_NEEDED	0x00000100
+#define SEQ4_STATUS_CB_PATH_DOWN_SESSION	0x00000200
+#define SEQ4_STATUS_BACKCHANNEL_FAULT		0x00000400
+
+#define NFS4_SECINFO_STYLE4_CURRENT_FH	0
+#define NFS4_SECINFO_STYLE4_PARENT	1
+
+#define NFS4_MAX_UINT64	(~(u64)0)
+
+/* An NFS4 sessions server must support at least NFS4_MAX_OPS operations.
+ * If a compound requires more operations, adjust NFS4_MAX_OPS accordingly.
+ */
+#define NFS4_MAX_OPS   8
+
+/* Our NFS4 client back channel server only wants the cb_sequene and the
+ * actual operation per compound
+ */
+#define NFS4_MAX_BACK_CHANNEL_OPS 2
+
+enum nfs4_acl_whotype {
+	NFS4_ACL_WHO_NAMED = 0,
+	NFS4_ACL_WHO_OWNER,
+	NFS4_ACL_WHO_GROUP,
+	NFS4_ACL_WHO_EVERYONE,
+};
+
+#endif /* _UAPI_LINUX_NFS4_H */
+
+/*
+ * Local variables:
+ *  c-basic-offset: 8
+ * End:
+ */
diff --git a/include/uapi/linux/nfs4_mount.h b/include/uapi/linux/nfs4_mount.h
new file mode 100644
index 00000000000..a0dcf665565
--- /dev/null
+++ b/include/uapi/linux/nfs4_mount.h
@@ -0,0 +1,71 @@
+#ifndef _LINUX_NFS4_MOUNT_H
+#define _LINUX_NFS4_MOUNT_H
+
+/*
+ *  linux/include/linux/nfs4_mount.h
+ *
+ *  Copyright (C) 2002  Trond Myklebust
+ *
+ *  structure passed from user-space to kernel-space during an nfsv4 mount
+ */
+
+/*
+ * WARNING!  Do not delete or change the order of these fields.  If
+ * a new field is required then add it to the end.  The version field
+ * tracks which fields are present.  This will ensure some measure of
+ * mount-to-kernel version compatibility.  Some of these aren't used yet
+ * but here they are anyway.
+ */
+#define NFS4_MOUNT_VERSION	1
+
+struct nfs_string {
+	unsigned int len;
+	const char __user * data;
+};
+
+struct nfs4_mount_data {
+	int version;				/* 1 */
+	int flags;				/* 1 */
+	int rsize;				/* 1 */
+	int wsize;				/* 1 */
+	int timeo;				/* 1 */
+	int retrans;				/* 1 */
+	int acregmin;				/* 1 */
+	int acregmax;				/* 1 */
+	int acdirmin;				/* 1 */
+	int acdirmax;				/* 1 */
+
+	/* see the definition of 'struct clientaddr4' in RFC3010 */
+	struct nfs_string client_addr;		/* 1 */
+
+	/* Mount path */
+	struct nfs_string mnt_path;		/* 1 */
+
+	/* Server details */
+	struct nfs_string hostname;		/* 1 */
+	/* Server IP address */
+	unsigned int host_addrlen;		/* 1 */
+	struct sockaddr __user * host_addr;	/* 1 */
+
+	/* Transport protocol to use */
+	int proto;				/* 1 */
+
+	/* Pseudo-flavours to use for authentication. See RFC2623 */
+	int auth_flavourlen;			/* 1 */
+	int __user *auth_flavours;		/* 1 */
+};
+
+/* bits in the flags field */
+/* Note: the fields that correspond to existing NFSv2/v3 mount options
+ * 	 should mirror the values from include/linux/nfs_mount.h
+ */
+
+#define NFS4_MOUNT_SOFT		0x0001	/* 1 */
+#define NFS4_MOUNT_INTR		0x0002	/* 1 */
+#define NFS4_MOUNT_NOCTO	0x0010	/* 1 */
+#define NFS4_MOUNT_NOAC		0x0020	/* 1 */
+#define NFS4_MOUNT_STRICTLOCK	0x1000	/* 1 */
+#define NFS4_MOUNT_UNSHARED	0x8000	/* 1 */
+#define NFS4_MOUNT_FLAGMASK	0x9033
+
+#endif
diff --git a/include/uapi/linux/nfs_fs.h b/include/uapi/linux/nfs_fs.h
new file mode 100644
index 00000000000..49142287999
--- /dev/null
+++ b/include/uapi/linux/nfs_fs.h
@@ -0,0 +1,61 @@
+/*
+ *  linux/include/linux/nfs_fs.h
+ *
+ *  Copyright (C) 1992  Rick Sladkey
+ *
+ *  OS-specific nfs filesystem definitions and declarations
+ */
+
+#ifndef _UAPI_LINUX_NFS_FS_H
+#define _UAPI_LINUX_NFS_FS_H
+
+#include <linux/magic.h>
+
+/* Default timeout values */
+#define NFS_DEF_UDP_TIMEO	(11)
+#define NFS_DEF_UDP_RETRANS	(3)
+#define NFS_DEF_TCP_TIMEO	(600)
+#define NFS_DEF_TCP_RETRANS	(2)
+
+#define NFS_MAX_UDP_TIMEOUT	(60*HZ)
+#define NFS_MAX_TCP_TIMEOUT	(600*HZ)
+
+#define NFS_DEF_ACREGMIN	(3)
+#define NFS_DEF_ACREGMAX	(60)
+#define NFS_DEF_ACDIRMIN	(30)
+#define NFS_DEF_ACDIRMAX	(60)
+
+/*
+ * When flushing a cluster of dirty pages, there can be different
+ * strategies:
+ */
+#define FLUSH_SYNC		1	/* file being synced, or contention */
+#define FLUSH_STABLE		4	/* commit to stable storage */
+#define FLUSH_LOWPRI		8	/* low priority background flush */
+#define FLUSH_HIGHPRI		16	/* high priority memory reclaim flush */
+#define FLUSH_COND_STABLE	32	/* conditional stable write - only stable
+					 * if everything fits in one RPC */
+
+
+/*
+ * NFS debug flags
+ */
+#define NFSDBG_VFS		0x0001
+#define NFSDBG_DIRCACHE		0x0002
+#define NFSDBG_LOOKUPCACHE	0x0004
+#define NFSDBG_PAGECACHE	0x0008
+#define NFSDBG_PROC		0x0010
+#define NFSDBG_XDR		0x0020
+#define NFSDBG_FILE		0x0040
+#define NFSDBG_ROOT		0x0080
+#define NFSDBG_CALLBACK		0x0100
+#define NFSDBG_CLIENT		0x0200
+#define NFSDBG_MOUNT		0x0400
+#define NFSDBG_FSCACHE		0x0800
+#define NFSDBG_PNFS		0x1000
+#define NFSDBG_PNFS_LD		0x2000
+#define NFSDBG_STATE		0x4000
+#define NFSDBG_ALL		0xFFFF
+
+
+#endif /* _UAPI_LINUX_NFS_FS_H */
diff --git a/include/uapi/linux/nfs_idmap.h b/include/uapi/linux/nfs_idmap.h
new file mode 100644
index 00000000000..8d4b1c7b24d
--- /dev/null
+++ b/include/uapi/linux/nfs_idmap.h
@@ -0,0 +1,65 @@
+/*
+ * include/linux/nfs_idmap.h
+ *
+ *  UID and GID to name mapping for clients.
+ *
+ *  Copyright (c) 2002 The Regents of the University of Michigan.
+ *  All rights reserved.
+ *
+ *  Marius Aamodt Eriksen <marius@umich.edu>
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *  1. Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *  2. Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in the
+ *     documentation and/or other materials provided with the distribution.
+ *  3. Neither the name of the University nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ *  DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ *  FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ *  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ *  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ *  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ *  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ *  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ *  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _UAPINFS_IDMAP_H
+#define _UAPINFS_IDMAP_H
+
+#include <linux/types.h>
+
+/* XXX from bits/utmp.h  */
+#define IDMAP_NAMESZ  128
+
+#define IDMAP_TYPE_USER  0
+#define IDMAP_TYPE_GROUP 1
+
+#define IDMAP_CONV_IDTONAME 0
+#define IDMAP_CONV_NAMETOID 1
+
+#define IDMAP_STATUS_INVALIDMSG 0x01
+#define IDMAP_STATUS_AGAIN      0x02
+#define IDMAP_STATUS_LOOKUPFAIL 0x04
+#define IDMAP_STATUS_SUCCESS    0x08
+
+struct idmap_msg {
+	__u8  im_type;
+	__u8  im_conv;
+	char  im_name[IDMAP_NAMESZ];
+	__u32 im_id;
+	__u8  im_status;
+};
+
+
+#endif /* _UAPINFS_IDMAP_H */
diff --git a/include/uapi/linux/nfs_mount.h b/include/uapi/linux/nfs_mount.h
new file mode 100644
index 00000000000..576bddd72e0
--- /dev/null
+++ b/include/uapi/linux/nfs_mount.h
@@ -0,0 +1,77 @@
+#ifndef _LINUX_NFS_MOUNT_H
+#define _LINUX_NFS_MOUNT_H
+
+/*
+ *  linux/include/linux/nfs_mount.h
+ *
+ *  Copyright (C) 1992  Rick Sladkey
+ *
+ *  structure passed from user-space to kernel-space during an nfs mount
+ */
+#include <linux/in.h>
+#include <linux/nfs.h>
+#include <linux/nfs2.h>
+#include <linux/nfs3.h>
+
+/*
+ * WARNING!  Do not delete or change the order of these fields.  If
+ * a new field is required then add it to the end.  The version field
+ * tracks which fields are present.  This will ensure some measure of
+ * mount-to-kernel version compatibility.  Some of these aren't used yet
+ * but here they are anyway.
+ */
+#define NFS_MOUNT_VERSION	6
+#define NFS_MAX_CONTEXT_LEN	256
+
+struct nfs_mount_data {
+	int		version;		/* 1 */
+	int		fd;			/* 1 */
+	struct nfs2_fh	old_root;		/* 1 */
+	int		flags;			/* 1 */
+	int		rsize;			/* 1 */
+	int		wsize;			/* 1 */
+	int		timeo;			/* 1 */
+	int		retrans;		/* 1 */
+	int		acregmin;		/* 1 */
+	int		acregmax;		/* 1 */
+	int		acdirmin;		/* 1 */
+	int		acdirmax;		/* 1 */
+	struct sockaddr_in addr;		/* 1 */
+	char		hostname[NFS_MAXNAMLEN + 1];		/* 1 */
+	int		namlen;			/* 2 */
+	unsigned int	bsize;			/* 3 */
+	struct nfs3_fh	root;			/* 4 */
+	int		pseudoflavor;		/* 5 */
+	char		context[NFS_MAX_CONTEXT_LEN + 1];	/* 6 */
+};
+
+/* bits in the flags field visible to user space */
+
+#define NFS_MOUNT_SOFT		0x0001	/* 1 */
+#define NFS_MOUNT_INTR		0x0002	/* 1 */ /* now unused, but ABI */
+#define NFS_MOUNT_SECURE	0x0004	/* 1 */
+#define NFS_MOUNT_POSIX		0x0008	/* 1 */
+#define NFS_MOUNT_NOCTO		0x0010	/* 1 */
+#define NFS_MOUNT_NOAC		0x0020	/* 1 */
+#define NFS_MOUNT_TCP		0x0040	/* 2 */
+#define NFS_MOUNT_VER3		0x0080	/* 3 */
+#define NFS_MOUNT_KERBEROS	0x0100	/* 3 */
+#define NFS_MOUNT_NONLM		0x0200	/* 3 */
+#define NFS_MOUNT_BROKEN_SUID	0x0400	/* 4 */
+#define NFS_MOUNT_NOACL		0x0800	/* 4 */
+#define NFS_MOUNT_STRICTLOCK	0x1000	/* reserved for NFSv4 */
+#define NFS_MOUNT_SECFLAVOUR	0x2000	/* 5 */
+#define NFS_MOUNT_NORDIRPLUS	0x4000	/* 5 */
+#define NFS_MOUNT_UNSHARED	0x8000	/* 5 */
+#define NFS_MOUNT_FLAGMASK	0xFFFF
+
+/* The following are for internal use only */
+#define NFS_MOUNT_LOOKUP_CACHE_NONEG	0x10000
+#define NFS_MOUNT_LOOKUP_CACHE_NONE	0x20000
+#define NFS_MOUNT_NORESVPORT		0x40000
+#define NFS_MOUNT_LEGACY_INTERFACE	0x80000
+
+#define NFS_MOUNT_LOCAL_FLOCK	0x100000
+#define NFS_MOUNT_LOCAL_FCNTL	0x200000
+
+#endif
diff --git a/include/uapi/linux/nfsacl.h b/include/uapi/linux/nfsacl.h
new file mode 100644
index 00000000000..9bb9771a107
--- /dev/null
+++ b/include/uapi/linux/nfsacl.h
@@ -0,0 +1,29 @@
+/*
+ * File: linux/nfsacl.h
+ *
+ * (C) 2003 Andreas Gruenbacher <agruen@suse.de>
+ */
+#ifndef _UAPI__LINUX_NFSACL_H
+#define _UAPI__LINUX_NFSACL_H
+
+#define NFS_ACL_PROGRAM	100227
+
+#define ACLPROC2_GETACL		1
+#define ACLPROC2_SETACL		2
+#define ACLPROC2_GETATTR	3
+#define ACLPROC2_ACCESS		4
+
+#define ACLPROC3_GETACL		1
+#define ACLPROC3_SETACL		2
+
+
+/* Flags for the getacl/setacl mode */
+#define NFS_ACL			0x0001
+#define NFS_ACLCNT		0x0002
+#define NFS_DFACL		0x0004
+#define NFS_DFACLCNT		0x0008
+
+/* Flag for Default ACL entries */
+#define NFS_ACL_DEFAULT		0x1000
+
+#endif /* _UAPI__LINUX_NFSACL_H */
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
new file mode 100644
index 00000000000..7df9b500c80
--- /dev/null
+++ b/include/uapi/linux/nl80211.h
@@ -0,0 +1,3072 @@
+#ifndef __LINUX_NL80211_H
+#define __LINUX_NL80211_H
+/*
+ * 802.11 netlink interface public header
+ *
+ * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2008 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com>
+ * Copyright 2008 Michael Buesch <m@bues.ch>
+ * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
+ * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
+ * Copyright 2008 Colin McCabe <colin@cozybit.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/types.h>
+
+/**
+ * DOC: Station handling
+ *
+ * Stations are added per interface, but a special case exists with VLAN
+ * interfaces. When a station is bound to an AP interface, it may be moved
+ * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN).
+ * The station is still assumed to belong to the AP interface it was added
+ * to.
+ *
+ * TODO: need more info?
+ */
+
+/**
+ * DOC: Frame transmission/registration support
+ *
+ * Frame transmission and registration support exists to allow userspace
+ * management entities such as wpa_supplicant react to management frames
+ * that are not being handled by the kernel. This includes, for example,
+ * certain classes of action frames that cannot be handled in the kernel
+ * for various reasons.
+ *
+ * Frame registration is done on a per-interface basis and registrations
+ * cannot be removed other than by closing the socket. It is possible to
+ * specify a registration filter to register, for example, only for a
+ * certain type of action frame. In particular with action frames, those
+ * that userspace registers for will not be returned as unhandled by the
+ * driver, so that the registered application has to take responsibility
+ * for doing that.
+ *
+ * The type of frame that can be registered for is also dependent on the
+ * driver and interface type. The frame types are advertised in wiphy
+ * attributes so applications know what to expect.
+ *
+ * NOTE: When an interface changes type while registrations are active,
+ *       these registrations are ignored until the interface type is
+ *       changed again. This means that changing the interface type can
+ *       lead to a situation that couldn't otherwise be produced, but
+ *       any such registrations will be dormant in the sense that they
+ *       will not be serviced, i.e. they will not receive any frames.
+ *
+ * Frame transmission allows userspace to send for example the required
+ * responses to action frames. It is subject to some sanity checking,
+ * but many frames can be transmitted. When a frame was transmitted, its
+ * status is indicated to the sending socket.
+ *
+ * For more technical details, see the corresponding command descriptions
+ * below.
+ */
+
+/**
+ * DOC: Virtual interface / concurrency capabilities
+ *
+ * Some devices are able to operate with virtual MACs, they can have
+ * more than one virtual interface. The capability handling for this
+ * is a bit complex though, as there may be a number of restrictions
+ * on the types of concurrency that are supported.
+ *
+ * To start with, each device supports the interface types listed in
+ * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the
+ * types there no concurrency is implied.
+ *
+ * Once concurrency is desired, more attributes must be observed:
+ * To start with, since some interface types are purely managed in
+ * software, like the AP-VLAN type in mac80211 for example, there's
+ * an additional list of these, they can be added at any time and
+ * are only restricted by some semantic restrictions (e.g. AP-VLAN
+ * cannot be added without a corresponding AP interface). This list
+ * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute.
+ *
+ * Further, the list of supported combinations is exported. This is
+ * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically,
+ * it exports a list of "groups", and at any point in time the
+ * interfaces that are currently active must fall into any one of
+ * the advertised groups. Within each group, there are restrictions
+ * on the number of interfaces of different types that are supported
+ * and also the number of different channels, along with potentially
+ * some other restrictions. See &enum nl80211_if_combination_attrs.
+ *
+ * All together, these attributes define the concurrency of virtual
+ * interfaces that a given device supports.
+ */
+
+/**
+ * enum nl80211_commands - supported nl80211 commands
+ *
+ * @NL80211_CMD_UNSPEC: unspecified command to catch errors
+ *
+ * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request
+ *	to get a list of all present wiphys.
+ * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
+ *	%NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
+ *	%NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ,
+ *	%NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT,
+ *	%NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
+ *	and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD.
+ *	However, for setting the channel, see %NL80211_CMD_SET_CHANNEL
+ *	instead, the support here is for backward compatibility only.
+ * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
+ *	or rename notification. Has attributes %NL80211_ATTR_WIPHY and
+ *	%NL80211_ATTR_WIPHY_NAME.
+ * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes
+ *	%NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME.
+ *
+ * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration;
+ *	either a dump request on a %NL80211_ATTR_WIPHY or a specific get
+ *	on an %NL80211_ATTR_IFINDEX is supported.
+ * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires
+ *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE.
+ * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response
+ *	to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX,
+ *	%NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also
+ *	be sent from userspace to request creation of a new virtual interface,
+ *	then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and
+ *	%NL80211_ATTR_IFNAME.
+ * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes
+ *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from
+ *	userspace to request deletion of a virtual interface, then requires
+ *	attribute %NL80211_ATTR_IFINDEX.
+ *
+ * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified
+ *	by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC.
+ * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT,
+ *	%NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD.
+ * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA,
+ *	%NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER,
+ *	and %NL80211_ATTR_KEY_SEQ attributes.
+ * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX
+ *	or %NL80211_ATTR_MAC.
+ *
+ * @NL80211_CMD_GET_BEACON: (not used)
+ * @NL80211_CMD_SET_BEACON: change the beacon on an access point interface
+ *	using the %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL
+ *	attributes. For drivers that generate the beacon and probe responses
+ *	internally, the following attributes must be provided: %NL80211_ATTR_IE,
+ *	%NL80211_ATTR_IE_PROBE_RESP and %NL80211_ATTR_IE_ASSOC_RESP.
+ * @NL80211_CMD_START_AP: Start AP operation on an AP interface, parameters
+ *	are like for %NL80211_CMD_SET_BEACON, and additionally parameters that
+ *	do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL,
+ *	%NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID,
+ *	%NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE,
+ *	%NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS,
+ *	%NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
+ *	%NL80211_ATTR_AUTH_TYPE and %NL80211_ATTR_INACTIVITY_TIMEOUT.
+ *	The channel to use can be set on the interface or be given using the
+ *	%NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_CHANNEL_TYPE attrs.
+ * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP
+ * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface
+ * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP
+ *
+ * @NL80211_CMD_GET_STATION: Get station attributes for station identified by
+ *	%NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_SET_STATION: Set station attributes for station identified by
+ *	%NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the
+ *	the interface identified by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC
+ *	or, if no MAC address given, all stations, on the interface identified
+ *	by %NL80211_ATTR_IFINDEX.
+ *
+ * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
+ * 	destination %NL80211_ATTR_MAC on the interface identified by
+ * 	%NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_SET_MPATH:  Set mesh path attributes for mesh path to
+ * 	destination %NL80211_ATTR_MAC on the interface identified by
+ * 	%NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by
+ *	%NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP.
+ * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by
+ *	%NL80211_ATTR_MAC.
+ * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
+ *	the interface identified by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
+ *	or, if no MAC address given, all mesh paths, on the interface identified
+ *	by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
+ *	%NL80211_ATTR_IFINDEX.
+ *
+ * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set
+ * 	regulatory domain.
+ * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
+ *	after being queried by the kernel. CRDA replies by sending a regulatory
+ *	domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
+ *	current alpha2 if it found a match. It also provides
+ * 	NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
+ * 	regulatory rule is a nested set of attributes  given by
+ * 	%NL80211_ATTR_REG_RULE_FREQ_[START|END] and
+ * 	%NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
+ * 	%NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
+ * 	%NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
+ * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain
+ * 	to the specified ISO/IEC 3166-1 alpha2 country code. The core will
+ * 	store this as a valid request and then query userspace for it.
+ *
+ * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the
+ *	interface identified by %NL80211_ATTR_IFINDEX
+ *
+ * @NL80211_CMD_SET_MESH_CONFIG: Set mesh networking properties for the
+ *      interface identified by %NL80211_ATTR_IFINDEX
+ *
+ * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The
+ *	interface is identified with %NL80211_ATTR_IFINDEX and the management
+ *	frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be
+ *	added to the end of the specified management frame is specified with
+ *	%NL80211_ATTR_IE. If the command succeeds, the requested data will be
+ *	added to all specified management frames generated by
+ *	kernel/firmware/driver.
+ *	Note: This command has been removed and it is only reserved at this
+ *	point to avoid re-using existing command number. The functionality this
+ *	command was planned for has been provided with cleaner design with the
+ *	option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN,
+ *	NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE,
+ *	NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE.
+ *
+ * @NL80211_CMD_GET_SCAN: get scan results
+ * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
+ *	%NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
+ *	probe requests at CCK rate or not.
+ * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to
+ *	NL80211_CMD_GET_SCAN and on the "scan" multicast group)
+ * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
+ *	partial scan results may be available
+ *
+ * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain
+ *	intervals, as specified by %NL80211_ATTR_SCHED_SCAN_INTERVAL.
+ *	Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS)
+ *	are passed, they are used in the probe requests.  For
+ *	broadcast, a broadcast SSID must be passed (ie. an empty
+ *	string).  If no SSID is passed, no probe requests are sent and
+ *	a passive scan is performed.  %NL80211_ATTR_SCAN_FREQUENCIES,
+ *	if passed, define which channels should be scanned; if not
+ *	passed, all channels allowed for the current regulatory domain
+ *	are used.  Extra IEs can also be passed from the userspace by
+ *	using the %NL80211_ATTR_IE attribute.
+ * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan.  Returns -ENOENT
+ *	if scheduled scan is not running.
+ * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan
+ *	results available.
+ * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has
+ *	stopped.  The driver may issue this event at any time during a
+ *	scheduled scan.  One reason for stopping the scan is if the hardware
+ *	does not support starting an association or a normal scan while running
+ *	a scheduled scan.  This event is also sent when the
+ *	%NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface
+ *	is brought down while a scheduled scan was running.
+ *
+ * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation
+ *      or noise level
+ * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
+ *	NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
+ *
+ * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry, using %NL80211_ATTR_MAC
+ *	(for the BSSID) and %NL80211_ATTR_PMKID.
+ * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC
+ *	(for the BSSID) and %NL80211_ATTR_PMKID.
+ * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries.
+ *
+ * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
+ * 	has been changed and provides details of the request information
+ * 	that caused the change such as who initiated the regulatory request
+ * 	(%NL80211_ATTR_REG_INITIATOR), the wiphy_idx
+ * 	(%NL80211_ATTR_REG_ALPHA2) on which the request was made from if
+ * 	the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or
+ * 	%NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain
+ * 	set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
+ * 	%NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
+ * 	to (%NL80211_ATTR_REG_ALPHA2).
+ * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon
+ * 	has been found while world roaming thus enabling active scan or
+ * 	any mode of operation that initiates TX (beacons) on a channel
+ * 	where we would not have been able to do either before. As an example
+ * 	if you are world roaming (regulatory domain set to world or if your
+ * 	driver is using a custom world roaming regulatory domain) and while
+ * 	doing a passive scan on the 5 GHz band you find an AP there (if not
+ * 	on a DFS channel) you will now be able to actively scan for that AP
+ * 	or use AP mode on your card on that same channel. Note that this will
+ * 	never be used for channels 1-11 on the 2 GHz band as they are always
+ * 	enabled world wide. This beacon hint is only sent if your device had
+ * 	either disabled active scanning or beaconing on a channel. We send to
+ * 	userspace the wiphy on which we removed a restriction from
+ * 	(%NL80211_ATTR_WIPHY) and the channel on which this occurred
+ * 	before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER)
+ * 	the beacon hint was processed.
+ *
+ * @NL80211_CMD_AUTHENTICATE: authentication request and notification.
+ *	This command is used both as a command (request to authenticate) and
+ *	as an event on the "mlme" multicast group indicating completion of the
+ *	authentication process.
+ *	When used as a command, %NL80211_ATTR_IFINDEX is used to identify the
+ *	interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and
+ *	BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify
+ *	the SSID (mainly for association, but is included in authentication
+ *	request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used
+ *	to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE
+ *	is used to specify the authentication type. %NL80211_ATTR_IE is used to
+ *	define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs)
+ *	to be added to the frame.
+ *	When used as an event, this reports reception of an Authentication
+ *	frame in station and IBSS modes when the local MLME processed the
+ *	frame, i.e., it was for the local STA and was received in correct
+ *	state. This is similar to MLME-AUTHENTICATE.confirm primitive in the
+ *	MLME SAP interface (kernel providing MLME, userspace SME). The
+ *	included %NL80211_ATTR_FRAME attribute contains the management frame
+ *	(including both the header and frame body, but not FCS). This event is
+ *	also used to indicate if the authentication attempt timed out. In that
+ *	case the %NL80211_ATTR_FRAME attribute is replaced with a
+ *	%NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which
+ *	pending authentication timed out).
+ * @NL80211_CMD_ASSOCIATE: association request and notification; like
+ *	NL80211_CMD_AUTHENTICATE but for Association and Reassociation
+ *	(similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request,
+ *	MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives).
+ * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like
+ *	NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to
+ *	MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication
+ *	primitives).
+ * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like
+ *	NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to
+ *	MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives).
+ *
+ * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael
+ *	MIC (part of TKIP) failure; sent on the "mlme" multicast group; the
+ *	event includes %NL80211_ATTR_MAC to describe the source MAC address of
+ *	the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key
+ *	type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and
+ *	%NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this
+ *	event matches with MLME-MICHAELMICFAILURE.indication() primitive
+ *
+ * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a
+ *	FREQ attribute (for the initial frequency if no peer can be found)
+ *	and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those
+ *	should be fixed rather than automatically determined. Can only be
+ *	executed on a network interface that is UP, and fixed BSSID/FREQ
+ *	may be rejected. Another optional parameter is the beacon interval,
+ *	given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not
+ *	given defaults to 100 TU (102.4ms).
+ * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is
+ *	determined by the network interface.
+ *
+ * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute
+ *	to identify the device, and the TESTDATA blob attribute to pass through
+ *	to the driver.
+ *
+ * @NL80211_CMD_CONNECT: connection request and notification; this command
+ *	requests to connect to a specified network but without separating
+ *	auth and assoc steps. For this, you need to specify the SSID in a
+ *	%NL80211_ATTR_SSID attribute, and can optionally specify the association
+ *	IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC,
+ *	%NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
+ *	%NL80211_ATTR_CONTROL_PORT_ETHERTYPE and
+ *	%NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT.
+ *	Background scan period can optionally be
+ *	specified in %NL80211_ATTR_BG_SCAN_PERIOD,
+ *	if not specified default background scan configuration
+ *	in driver is used and if period value is 0, bg scan will be disabled.
+ *	This attribute is ignored if driver does not support roam scan.
+ *	It is also sent as an event, with the BSSID and response IEs when the
+ *	connection is established or failed to be established. This can be
+ *	determined by the STATUS_CODE attribute.
+ * @NL80211_CMD_ROAM: request that the card roam (currently not implemented),
+ *	sent as an event when the card/driver roamed by itself.
+ * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
+ *	userspace that a connection was dropped by the AP or due to other
+ *	reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
+ *	%NL80211_ATTR_REASON_CODE attributes are used.
+ *
+ * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices
+ *	associated with this wiphy must be down and will follow.
+ *
+ * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified
+ *	channel for the specified amount of time. This can be used to do
+ *	off-channel operations like transmit a Public Action frame and wait for
+ *	a response while being associated to an AP on another channel.
+ *	%NL80211_ATTR_IFINDEX is used to specify which interface (and thus
+ *	radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
+ *	frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be
+ *	optionally used to specify additional channel parameters.
+ *	%NL80211_ATTR_DURATION is used to specify the duration in milliseconds
+ *	to remain on the channel. This command is also used as an event to
+ *	notify when the requested duration starts (it may take a while for the
+ *	driver to schedule this time due to other concurrent needs for the
+ *	radio).
+ *	When called, this operation returns a cookie (%NL80211_ATTR_COOKIE)
+ *	that will be included with any events pertaining to this request;
+ *	the cookie is also used to cancel the request.
+ * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a
+ *	pending remain-on-channel duration if the desired operation has been
+ *	completed prior to expiration of the originally requested duration.
+ *	%NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the
+ *	radio. The %NL80211_ATTR_COOKIE attribute must be given as well to
+ *	uniquely identify the request.
+ *	This command is also used as an event to notify when a requested
+ *	remain-on-channel duration has expired.
+ *
+ * @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX
+ *	rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface
+ *	and @NL80211_ATTR_TX_RATES the set of allowed rates.
+ *
+ * @NL80211_CMD_REGISTER_FRAME: Register for receiving certain mgmt frames
+ *	(via @NL80211_CMD_FRAME) for processing in userspace. This command
+ *	requires an interface index, a frame type attribute (optional for
+ *	backward compatibility reasons, if not given assumes action frames)
+ *	and a match attribute containing the first few bytes of the frame
+ *	that should match, e.g. a single byte for only a category match or
+ *	four bytes for vendor frames including the OUI. The registration
+ *	cannot be dropped, but is removed automatically when the netlink
+ *	socket is closed. Multiple registrations can be made.
+ * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for
+ *	backward compatibility
+ * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This
+ *	command is used both as a request to transmit a management frame and
+ *	as an event indicating reception of a frame that was not processed in
+ *	kernel code, but is for us (i.e., which may need to be processed in a
+ *	user space application). %NL80211_ATTR_FRAME is used to specify the
+ *	frame contents (including header). %NL80211_ATTR_WIPHY_FREQ (and
+ *	optionally %NL80211_ATTR_WIPHY_CHANNEL_TYPE) is used to indicate on
+ *	which channel the frame is to be transmitted or was received. If this
+ *	channel is not the current channel (remain-on-channel or the
+ *	operational channel) the device will switch to the given channel and
+ *	transmit the frame, optionally waiting for a response for the time
+ *	specified using %NL80211_ATTR_DURATION. When called, this operation
+ *	returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the
+ *	TX status event pertaining to the TX request.
+ *	%NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
+ *	management frames at CCK rate or not in 2GHz band.
+ * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this
+ *	command may be used with the corresponding cookie to cancel the wait
+ *	time if it is known that it is no longer necessary.
+ * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility.
+ * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame
+ *	transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies
+ *	the TX command and %NL80211_ATTR_FRAME includes the contents of the
+ *	frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged
+ *	the frame.
+ * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for
+ *	backward compatibility.
+ *
+ * @NL80211_CMD_SET_POWER_SAVE: Set powersave, using %NL80211_ATTR_PS_STATE
+ * @NL80211_CMD_GET_POWER_SAVE: Get powersave status in %NL80211_ATTR_PS_STATE
+ *
+ * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command
+ *	is used to configure connection quality monitoring notification trigger
+ *	levels.
+ * @NL80211_CMD_NOTIFY_CQM: Connection quality monitor notification. This
+ *	command is used as an event to indicate the that a trigger level was
+ *	reached.
+ * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ
+ *	and %NL80211_ATTR_WIPHY_CHANNEL_TYPE) the given interface (identifed
+ *	by %NL80211_ATTR_IFINDEX) shall operate on.
+ *	In case multiple channels are supported by the device, the mechanism
+ *	with which it switches channels is implementation-defined.
+ *	When a monitor interface is given, it can only switch channel while
+ *	no other interfaces are operating to avoid disturbing the operation
+ *	of any other interfaces, and other interfaces will again take
+ *	precedence when they are used.
+ *
+ * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
+ *
+ * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial
+ *	mesh config parameters may be given.
+ * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the
+ *	network is determined by the network interface.
+ *
+ * @NL80211_CMD_UNPROT_DEAUTHENTICATE: Unprotected deauthentication frame
+ *	notification. This event is used to indicate that an unprotected
+ *	deauthentication frame was dropped when MFP is in use.
+ * @NL80211_CMD_UNPROT_DISASSOCIATE: Unprotected disassociation frame
+ *	notification. This event is used to indicate that an unprotected
+ *	disassociation frame was dropped when MFP is in use.
+ *
+ * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a
+ *      beacon or probe response from a compatible mesh peer.  This is only
+ *      sent while no station information (sta_info) exists for the new peer
+ *      candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH is set.  On
+ *      reception of this notification, userspace may decide to create a new
+ *      station (@NL80211_CMD_NEW_STATION).  To stop this notification from
+ *      reoccurring, the userspace authentication daemon may want to create the
+ *      new station with the AUTHENTICATED flag unset and maybe change it later
+ *      depending on the authentication result.
+ *
+ * @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings.
+ * @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings.
+ *	Since wireless is more complex than wired ethernet, it supports
+ *	various triggers. These triggers can be configured through this
+ *	command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For
+ *	more background information, see
+ *	http://wireless.kernel.org/en/users/Documentation/WoWLAN.
+ *
+ * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver
+ *	the necessary information for supporting GTK rekey offload. This
+ *	feature is typically used during WoWLAN. The configuration data
+ *	is contained in %NL80211_ATTR_REKEY_DATA (which is nested and
+ *	contains the data in sub-attributes). After rekeying happened,
+ *	this command may also be sent by the driver as an MLME event to
+ *	inform userspace of the new replay counter.
+ *
+ * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace
+ *	of PMKSA caching dandidates.
+ *
+ * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup).
+ * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame.
+ *
+ * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP
+ *	(or GO) interface (i.e. hostapd) to ask for unexpected frames to
+ *	implement sending deauth to stations that send unexpected class 3
+ *	frames. Also used as the event sent by the kernel when such a frame
+ *	is received.
+ *	For the event, the %NL80211_ATTR_MAC attribute carries the TA and
+ *	other attributes like the interface index are present.
+ *	If used as the command it must have an interface index and you can
+ *	only unsubscribe from the event by closing the socket. Subscription
+ *	is also for %NL80211_CMD_UNEXPECTED_4ADDR_FRAME events.
+ *
+ * @NL80211_CMD_UNEXPECTED_4ADDR_FRAME: Sent as an event indicating that the
+ *	associated station identified by %NL80211_ATTR_MAC sent a 4addr frame
+ *	and wasn't already in a 4-addr VLAN. The event will be sent similarly
+ *	to the %NL80211_CMD_UNEXPECTED_FRAME event, to the same listener.
+ *
+ * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface
+ *	by sending a null data frame to it and reporting when the frame is
+ *	acknowleged. This is used to allow timing out inactive clients. Uses
+ *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a
+ *	direct reply with an %NL80211_ATTR_COOKIE that is later used to match
+ *	up the event with the request. The event includes the same data and
+ *	has %NL80211_ATTR_ACK set if the frame was ACKed.
+ *
+ * @NL80211_CMD_REGISTER_BEACONS: Register this socket to receive beacons from
+ *	other BSSes when any interfaces are in AP mode. This helps implement
+ *	OLBC handling in hostapd. Beacons are reported in %NL80211_CMD_FRAME
+ *	messages. Note that per PHY only one application may register.
+ *
+ * @NL80211_CMD_SET_NOACK_MAP: sets a bitmap for the individual TIDs whether
+ *      No Acknowledgement Policy should be applied.
+ *
+ * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels
+ *	independently of the userspace SME, send this event indicating
+ *	%NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ with
+ *	%NL80211_ATTR_WIPHY_CHANNEL_TYPE.
+ *
+ * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by
+ *	its %NL80211_ATTR_WDEV identifier. It must have been created with
+ *	%NL80211_CMD_NEW_INTERFACE previously. After it has been started, the
+ *	P2P Device can be used for P2P operations, e.g. remain-on-channel and
+ *	public action frame TX.
+ * @NL80211_CMD_STOP_P2P_DEVICE: Stop the given P2P Device, identified by
+ *	its %NL80211_ATTR_WDEV identifier.
+ *
+ * @NL80211_CMD_CONN_FAILED: connection request to an AP failed; used to
+ *	notify userspace that AP has rejected the connection request from a
+ *	station, due to particular reason. %NL80211_ATTR_CONN_FAILED_REASON
+ *	is used for this.
+ *
+ * @NL80211_CMD_MAX: highest used command number
+ * @__NL80211_CMD_AFTER_LAST: internal use
+ */
+enum nl80211_commands {
+/* don't change the order or add anything between, this is ABI! */
+	NL80211_CMD_UNSPEC,
+
+	NL80211_CMD_GET_WIPHY,		/* can dump */
+	NL80211_CMD_SET_WIPHY,
+	NL80211_CMD_NEW_WIPHY,
+	NL80211_CMD_DEL_WIPHY,
+
+	NL80211_CMD_GET_INTERFACE,	/* can dump */
+	NL80211_CMD_SET_INTERFACE,
+	NL80211_CMD_NEW_INTERFACE,
+	NL80211_CMD_DEL_INTERFACE,
+
+	NL80211_CMD_GET_KEY,
+	NL80211_CMD_SET_KEY,
+	NL80211_CMD_NEW_KEY,
+	NL80211_CMD_DEL_KEY,
+
+	NL80211_CMD_GET_BEACON,
+	NL80211_CMD_SET_BEACON,
+	NL80211_CMD_START_AP,
+	NL80211_CMD_NEW_BEACON = NL80211_CMD_START_AP,
+	NL80211_CMD_STOP_AP,
+	NL80211_CMD_DEL_BEACON = NL80211_CMD_STOP_AP,
+
+	NL80211_CMD_GET_STATION,
+	NL80211_CMD_SET_STATION,
+	NL80211_CMD_NEW_STATION,
+	NL80211_CMD_DEL_STATION,
+
+	NL80211_CMD_GET_MPATH,
+	NL80211_CMD_SET_MPATH,
+	NL80211_CMD_NEW_MPATH,
+	NL80211_CMD_DEL_MPATH,
+
+	NL80211_CMD_SET_BSS,
+
+	NL80211_CMD_SET_REG,
+	NL80211_CMD_REQ_SET_REG,
+
+	NL80211_CMD_GET_MESH_CONFIG,
+	NL80211_CMD_SET_MESH_CONFIG,
+
+	NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */,
+
+	NL80211_CMD_GET_REG,
+
+	NL80211_CMD_GET_SCAN,
+	NL80211_CMD_TRIGGER_SCAN,
+	NL80211_CMD_NEW_SCAN_RESULTS,
+	NL80211_CMD_SCAN_ABORTED,
+
+	NL80211_CMD_REG_CHANGE,
+
+	NL80211_CMD_AUTHENTICATE,
+	NL80211_CMD_ASSOCIATE,
+	NL80211_CMD_DEAUTHENTICATE,
+	NL80211_CMD_DISASSOCIATE,
+
+	NL80211_CMD_MICHAEL_MIC_FAILURE,
+
+	NL80211_CMD_REG_BEACON_HINT,
+
+	NL80211_CMD_JOIN_IBSS,
+	NL80211_CMD_LEAVE_IBSS,
+
+	NL80211_CMD_TESTMODE,
+
+	NL80211_CMD_CONNECT,
+	NL80211_CMD_ROAM,
+	NL80211_CMD_DISCONNECT,
+
+	NL80211_CMD_SET_WIPHY_NETNS,
+
+	NL80211_CMD_GET_SURVEY,
+	NL80211_CMD_NEW_SURVEY_RESULTS,
+
+	NL80211_CMD_SET_PMKSA,
+	NL80211_CMD_DEL_PMKSA,
+	NL80211_CMD_FLUSH_PMKSA,
+
+	NL80211_CMD_REMAIN_ON_CHANNEL,
+	NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL,
+
+	NL80211_CMD_SET_TX_BITRATE_MASK,
+
+	NL80211_CMD_REGISTER_FRAME,
+	NL80211_CMD_REGISTER_ACTION = NL80211_CMD_REGISTER_FRAME,
+	NL80211_CMD_FRAME,
+	NL80211_CMD_ACTION = NL80211_CMD_FRAME,
+	NL80211_CMD_FRAME_TX_STATUS,
+	NL80211_CMD_ACTION_TX_STATUS = NL80211_CMD_FRAME_TX_STATUS,
+
+	NL80211_CMD_SET_POWER_SAVE,
+	NL80211_CMD_GET_POWER_SAVE,
+
+	NL80211_CMD_SET_CQM,
+	NL80211_CMD_NOTIFY_CQM,
+
+	NL80211_CMD_SET_CHANNEL,
+	NL80211_CMD_SET_WDS_PEER,
+
+	NL80211_CMD_FRAME_WAIT_CANCEL,
+
+	NL80211_CMD_JOIN_MESH,
+	NL80211_CMD_LEAVE_MESH,
+
+	NL80211_CMD_UNPROT_DEAUTHENTICATE,
+	NL80211_CMD_UNPROT_DISASSOCIATE,
+
+	NL80211_CMD_NEW_PEER_CANDIDATE,
+
+	NL80211_CMD_GET_WOWLAN,
+	NL80211_CMD_SET_WOWLAN,
+
+	NL80211_CMD_START_SCHED_SCAN,
+	NL80211_CMD_STOP_SCHED_SCAN,
+	NL80211_CMD_SCHED_SCAN_RESULTS,
+	NL80211_CMD_SCHED_SCAN_STOPPED,
+
+	NL80211_CMD_SET_REKEY_OFFLOAD,
+
+	NL80211_CMD_PMKSA_CANDIDATE,
+
+	NL80211_CMD_TDLS_OPER,
+	NL80211_CMD_TDLS_MGMT,
+
+	NL80211_CMD_UNEXPECTED_FRAME,
+
+	NL80211_CMD_PROBE_CLIENT,
+
+	NL80211_CMD_REGISTER_BEACONS,
+
+	NL80211_CMD_UNEXPECTED_4ADDR_FRAME,
+
+	NL80211_CMD_SET_NOACK_MAP,
+
+	NL80211_CMD_CH_SWITCH_NOTIFY,
+
+	NL80211_CMD_START_P2P_DEVICE,
+	NL80211_CMD_STOP_P2P_DEVICE,
+
+	NL80211_CMD_CONN_FAILED,
+
+	/* add new commands above here */
+
+	/* used to define NL80211_CMD_MAX below */
+	__NL80211_CMD_AFTER_LAST,
+	NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1
+};
+
+/*
+ * Allow user space programs to use #ifdef on new commands by defining them
+ * here
+ */
+#define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS
+#define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE
+#define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE
+#define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE
+#define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE
+#define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE
+#define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE
+#define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT
+
+#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
+
+/* source-level API compatibility */
+#define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG
+#define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG
+#define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE
+
+/**
+ * enum nl80211_attrs - nl80211 netlink attributes
+ *
+ * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors
+ *
+ * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf.
+ *	/sys/class/ieee80211/<phyname>/index
+ * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
+ * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters
+ * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz
+ * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ
+ *	if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included):
+ *	NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including
+ *		this attribute)
+ *	NL80211_CHAN_HT20 = HT20 only
+ *	NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel
+ *	NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel
+ * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is
+ *	less than or equal to the RTS threshold; allowed range: 1..255;
+ *	dot11ShortRetryLimit; u8
+ * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is
+ *	greater than the RTS threshold; allowed range: 1..255;
+ *	dot11ShortLongLimit; u8
+ * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum
+ *	length in octets for frames; allowed range: 256..8000, disable
+ *	fragmentation with (u32)-1; dot11FragmentationThreshold; u32
+ * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length
+ *	larger than or equal to this use RTS/CTS handshake); allowed range:
+ *	0..65536, disable with (u32)-1; dot11RTSThreshold; u32
+ * @NL80211_ATTR_WIPHY_COVERAGE_CLASS: Coverage Class as defined by IEEE 802.11
+ *	section 7.3.2.9; dot11CoverageClass; u8
+ *
+ * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
+ * @NL80211_ATTR_IFNAME: network interface name
+ * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype
+ *
+ * @NL80211_ATTR_WDEV: wireless device identifier, used for pseudo-devices
+ *	that don't have a netdev (u64)
+ *
+ * @NL80211_ATTR_MAC: MAC address (various uses)
+ *
+ * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of
+ *	16 bytes encryption key followed by 8 bytes each for TX and RX MIC
+ *	keys
+ * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3)
+ * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
+ *	section 7.3.2.25.1, e.g. 0x000FAC04)
+ * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
+ *	CCMP keys, each six bytes in little endian
+ * @NL80211_ATTR_KEY_DEFAULT: Flag attribute indicating the key is default key
+ * @NL80211_ATTR_KEY_DEFAULT_MGMT: Flag attribute indicating the key is the
+ *	default management key
+ * @NL80211_ATTR_CIPHER_SUITES_PAIRWISE: For crypto settings for connect or
+ *	other commands, indicates which pairwise cipher suites are used
+ * @NL80211_ATTR_CIPHER_SUITE_GROUP: For crypto settings for connect or
+ *	other commands, indicates which group cipher suite is used
+ *
+ * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU
+ * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing
+ * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE
+ * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE
+ *
+ * @NL80211_ATTR_STA_AID: Association ID for the station (u16)
+ * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of
+ *	&enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2)
+ * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by
+ *	IEEE 802.11 7.3.1.6 (u16).
+ * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported
+ *	rates as defined by IEEE 802.11 7.3.2.2 but without the length
+ *	restriction (at most %NL80211_MAX_SUPP_RATES).
+ * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station
+ *	to, or the AP interface the station was originally added to to.
+ * @NL80211_ATTR_STA_INFO: information about a station, part of station info
+ *	given for %NL80211_CMD_GET_STATION, nested attribute containing
+ *	info as possible, see &enum nl80211_sta_info.
+ *
+ * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands,
+ *	consisting of a nested array.
+ *
+ * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes).
+ * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link.
+ * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
+ * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
+ * 	info given for %NL80211_CMD_GET_MPATH, nested attribute described at
+ *	&enum nl80211_mpath_info.
+ *
+ * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of
+ *      &enum nl80211_mntr_flags.
+ *
+ * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the
+ * 	current regulatory domain should be set to or is already set to.
+ * 	For example, 'CR', for Costa Rica. This attribute is used by the kernel
+ * 	to query the CRDA to retrieve one regulatory domain. This attribute can
+ * 	also be used by userspace to query the kernel for the currently set
+ * 	regulatory domain. We chose an alpha2 as that is also used by the
+ * 	IEEE-802.11d country information element to identify a country.
+ * 	Users can also simply ask the wireless core to set regulatory domain
+ * 	to a specific alpha2.
+ * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory
+ *	rules.
+ *
+ * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1)
+ * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled
+ *	(u8, 0 or 1)
+ * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled
+ *	(u8, 0 or 1)
+ * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic
+ *	rates in format defined by IEEE 802.11 7.3.2.2 but without the length
+ *	restriction (at most %NL80211_MAX_SUPP_RATES).
+ *
+ * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from
+ *	association request when used with NL80211_CMD_NEW_STATION)
+ *
+ * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all
+ *	supported interface types, each a flag attribute with the number
+ *	of the interface mode.
+ *
+ * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for
+ *	%NL80211_CMD_SET_MGMT_EXTRA_IE.
+ *
+ * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with
+ *	%NL80211_CMD_SET_MGMT_EXTRA_IE).
+ *
+ * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with
+ *	a single scan request, a wiphy attribute.
+ * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS: number of SSIDs you can
+ *	scan with a single scheduled scan request, a wiphy attribute.
+ * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements
+ *	that can be added to a scan request
+ * @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information
+ *	elements that can be added to a scheduled scan request
+ * @NL80211_ATTR_MAX_MATCH_SETS: maximum number of sets that can be
+ *	used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute.
+ *
+ * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)
+ * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive
+ *	scanning and include a zero-length SSID (wildcard) for wildcard scan
+ * @NL80211_ATTR_BSS: scan result BSS
+ *
+ * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain
+ * 	currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_*
+ * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently
+ * 	set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)
+ *
+ * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies
+ *	an array of command numbers (i.e. a mapping index to command number)
+ *	that the driver for the given wiphy supports.
+ *
+ * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header
+ *	and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and
+ *	NL80211_CMD_ASSOCIATE events
+ * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets)
+ * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type,
+ *	represented as a u32
+ * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and
+ *	%NL80211_CMD_DISASSOCIATE, u16
+ *
+ * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as
+ *	a u32
+ *
+ * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change
+ * 	due to considerations from a beacon hint. This attribute reflects
+ * 	the state of the channel _before_ the beacon hint processing. This
+ * 	attributes consists of a nested attribute containing
+ * 	NL80211_FREQUENCY_ATTR_*
+ * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change
+ * 	due to considerations from a beacon hint. This attribute reflects
+ * 	the state of the channel _after_ the beacon hint processing. This
+ * 	attributes consists of a nested attribute containing
+ * 	NL80211_FREQUENCY_ATTR_*
+ *
+ * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported
+ *	cipher suites
+ *
+ * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look
+ *	for other networks on different channels
+ *
+ * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this
+ *	is used, e.g., with %NL80211_CMD_AUTHENTICATE event
+ *
+ * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is
+ *	used for the association (&enum nl80211_mfp, represented as a u32);
+ *	this attribute can be used
+ *	with %NL80211_CMD_ASSOCIATE request
+ *
+ * @NL80211_ATTR_STA_FLAGS2: Attribute containing a
+ *	&struct nl80211_sta_flag_update.
+ *
+ * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls
+ *	IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in
+ *	station mode. If the flag is included in %NL80211_CMD_ASSOCIATE
+ *	request, the driver will assume that the port is unauthorized until
+ *	authorized by user space. Otherwise, port is marked authorized by
+ *	default in station mode.
+ * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the
+ *	ethertype that will be used for key negotiation. It can be
+ *	specified with the associate and connect commands. If it is not
+ *	specified, the value defaults to 0x888E (PAE, 802.1X). This
+ *	attribute is also used as a flag in the wiphy information to
+ *	indicate that protocols other than PAE are supported.
+ * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with
+ *	%NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom
+ *	ethertype frames used for key negotiation must not be encrypted.
+ *
+ * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
+ *	We recommend using nested, driver-specific attributes within this.
+ *
+ * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT
+ *	event was due to the AP disconnecting the station, and not due to
+ *	a local disconnect request.
+ * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT
+ *	event (u16)
+ * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating
+ *	that protected APs should be used. This is also used with NEW_BEACON to
+ *	indicate that the BSS is to use protection.
+ *
+ * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON
+ *	to indicate which unicast key ciphers will be used with the connection
+ *	(an array of u32).
+ * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
+ *	indicate which group key cipher will be used with the connection (a
+ *	u32).
+ * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
+ *	indicate which WPA version(s) the AP we want to associate with is using
+ *	(a u32 with flags from &enum nl80211_wpa_versions).
+ * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
+ *	indicate which key management algorithm(s) to use (an array of u32).
+ *
+ * @NL80211_ATTR_REQ_IE: (Re)association request information elements as
+ *	sent out by the card, for ROAM and successful CONNECT events.
+ * @NL80211_ATTR_RESP_IE: (Re)association response information elements as
+ *	sent by peer, for ROAM and successful CONNECT events.
+ *
+ * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE
+ *	commands to specify using a reassociate frame
+ *
+ * @NL80211_ATTR_KEY: key information in a nested attribute with
+ *	%NL80211_KEY_* sub-attributes
+ * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect()
+ *	and join_ibss(), key information is in a nested attribute each
+ *	with %NL80211_KEY_* sub-attributes
+ *
+ * @NL80211_ATTR_PID: Process ID of a network namespace.
+ *
+ * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for
+ *	dumps. This number increases whenever the object list being
+ *	dumped changes, and as such userspace can verify that it has
+ *	obtained a complete and consistent snapshot by verifying that
+ *	all dump messages contain the same generation number. If it
+ *	changed then the list changed and the dump should be repeated
+ *	completely from scratch.
+ *
+ * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface
+ *
+ * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of
+ *      the survey response for %NL80211_CMD_GET_SURVEY, nested attribute
+ *      containing info as possible, see &enum survey_info.
+ *
+ * @NL80211_ATTR_PMKID: PMK material for PMKSA caching.
+ * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can
+ *	cache, a wiphy attribute.
+ *
+ * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32.
+ * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that
+ *	specifies the maximum duration that can be requested with the
+ *	remain-on-channel operation, in milliseconds, u32.
+ *
+ * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects.
+ *
+ * @NL80211_ATTR_TX_RATES: Nested set of attributes
+ *	(enum nl80211_tx_rate_attributes) describing TX rates per band. The
+ *	enum nl80211_band value is used as the index (nla_type() of the nested
+ *	data. If a band is not included, it will be configured to allow all
+ *	rates based on negotiated supported rates information. This attribute
+ *	is used with %NL80211_CMD_SET_TX_BITRATE_MASK.
+ *
+ * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
+ *	at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME.
+ * @NL80211_ATTR_FRAME_TYPE: A u16 indicating the frame type/subtype for the
+ *	@NL80211_CMD_REGISTER_FRAME command.
+ * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a
+ *	nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
+ *	information about which frame types can be transmitted with
+ *	%NL80211_CMD_FRAME.
+ * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a
+ *	nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
+ *	information about which frame types can be registered for RX.
+ *
+ * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
+ *	acknowledged by the recipient.
+ *
+ * @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values.
+ *
+ * @NL80211_ATTR_CQM: connection quality monitor configuration in a
+ *	nested attribute with %NL80211_ATTR_CQM_* sub-attributes.
+ *
+ * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command
+ *	is requesting a local authentication/association state change without
+ *	invoking actual management frame exchange. This can be used with
+ *	NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE,
+ *	NL80211_CMD_DISASSOCIATE.
+ *
+ * @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations
+ *	connected to this BSS.
+ *
+ * @NL80211_ATTR_WIPHY_TX_POWER_SETTING: Transmit power setting type. See
+ *      &enum nl80211_tx_power_setting for possible values.
+ * @NL80211_ATTR_WIPHY_TX_POWER_LEVEL: Transmit power level in signed mBm units.
+ *      This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING
+ *      for non-automatic settings.
+ *
+ * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly
+ *	means support for per-station GTKs.
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting.
+ *	This can be used to mask out antennas which are not attached or should
+ *	not be used for transmitting. If an antenna is not selected in this
+ *	bitmap the hardware is not allowed to transmit on this antenna.
+ *
+ *	Each bit represents one antenna, starting with antenna 1 at the first
+ *	bit. Depending on which antennas are selected in the bitmap, 802.11n
+ *	drivers can derive which chainmasks to use (if all antennas belonging to
+ *	a particular chain are disabled this chain should be disabled) and if
+ *	a chain has diversity antennas wether diversity should be used or not.
+ *	HT capabilities (STBC, TX Beamforming, Antenna selection) can be
+ *	derived from the available chains after applying the antenna mask.
+ *	Non-802.11n drivers can derive wether to use diversity or not.
+ *	Drivers may reject configurations or RX/TX mask combinations they cannot
+ *	support by returning -EINVAL.
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving.
+ *	This can be used to mask out antennas which are not attached or should
+ *	not be used for receiving. If an antenna is not selected in this bitmap
+ *	the hardware should not be configured to receive on this antenna.
+ *	For a more detailed description see @NL80211_ATTR_WIPHY_ANTENNA_TX.
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available
+ *	for configuration as TX antennas via the above parameters.
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX: Bitmap of antennas which are available
+ *	for configuration as RX antennas via the above parameters.
+ *
+ * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS
+ *
+ * @NL80211_ATTR_OFFCHANNEL_TX_OK: For management frame TX, the frame may be
+ *	transmitted on another channel when the channel given doesn't match
+ *	the current channel. If the current channel doesn't match and this
+ *	flag isn't set, the frame will be rejected. This is also used as an
+ *	nl80211 capability flag.
+ *
+ * @NL80211_ATTR_BSS_HT_OPMODE: HT operation mode (u16)
+ *
+ * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags
+ *	attributes, specifying what a key should be set as default as.
+ *	See &enum nl80211_key_default_types.
+ *
+ * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters.  These cannot be
+ *	changed once the mesh is active.
+ * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute
+ *	containing attributes from &enum nl80211_meshconf_params.
+ * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver
+ *	allows auth frames in a mesh to be passed to userspace for processing via
+ *	the @NL80211_MESH_SETUP_USERSPACE_AUTH flag.
+ * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as
+ *	defined in &enum nl80211_plink_state. Used when userspace is
+ *	driving the peer link management state machine.
+ *	@NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled.
+ *
+ * @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy
+ *	capabilities, the supported WoWLAN triggers
+ * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to
+ *	indicate which WoW triggers should be enabled. This is also
+ *	used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN
+ *	triggers.
+ *
+ * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan
+ *	cycles, in msecs.
+ *
+ * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more
+ *	sets of attributes to match during scheduled scans.  Only BSSs
+ *	that match any of the sets will be reported.  These are
+ *	pass-thru filter rules.
+ *	For a match to succeed, the BSS must match all attributes of a
+ *	set.  Since not every hardware supports matching all types of
+ *	attributes, there is no guarantee that the reported BSSs are
+ *	fully complying with the match sets and userspace needs to be
+ *	able to ignore them by itself.
+ *	Thus, the implementation is somewhat hardware-dependent, but
+ *	this is only an optimization and the userspace application
+ *	needs to handle all the non-filtered results anyway.
+ *	If the match attributes don't make sense when combined with
+ *	the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID
+ *	is included in the probe request, but the match attributes
+ *	will never let it go through), -EINVAL may be returned.
+ *	If ommited, no filtering is done.
+ *
+ * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported
+ *	interface combinations. In each nested item, it contains attributes
+ *	defined in &enum nl80211_if_combination_attrs.
+ * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like
+ *	%NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that
+ *	are managed in software: interfaces of these types aren't subject to
+ *	any restrictions in their number or combinations.
+ *
+ * @NL80211_ATTR_REKEY_DATA: nested attribute containing the information
+ *	necessary for GTK rekeying in the device, see &enum nl80211_rekey_data.
+ *
+ * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan,
+ *	nested array attribute containing an entry for each band, with the entry
+ *	being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but
+ *	without the length restriction (at most %NL80211_MAX_SUPP_RATES).
+ *
+ * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon
+ *	and Probe Response (when response to wildcard Probe Request); see
+ *	&enum nl80211_hidden_ssid, represented as a u32
+ *
+ * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame.
+ *	This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to
+ *	provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the
+ *	driver (or firmware) replies to Probe Request frames.
+ * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association
+ *	Response frames. This is used with %NL80211_CMD_NEW_BEACON and
+ *	%NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into
+ *	(Re)Association Response frames when the driver (or firmware) replies to
+ *	(Re)Association Request frames.
+ *
+ * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration
+ *	of the station, see &enum nl80211_sta_wme_attr.
+ * @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working
+ *	as AP.
+ *
+ * @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of
+ *	roaming to another AP in the same ESS if the signal lever is low.
+ *
+ * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching
+ *	candidate information, see &enum nl80211_pmksa_candidate_attr.
+ *
+ * @NL80211_ATTR_TX_NO_CCK_RATE: Indicates whether to use CCK rate or not
+ *	for management frames transmission. In order to avoid p2p probe/action
+ *	frames are being transmitted at CCK rate in 2GHz band, the user space
+ *	applications use this attribute.
+ *	This attribute is used with %NL80211_CMD_TRIGGER_SCAN and
+ *	%NL80211_CMD_FRAME commands.
+ *
+ * @NL80211_ATTR_TDLS_ACTION: Low level TDLS action code (e.g. link setup
+ *	request, link setup confirm, link teardown, etc.). Values are
+ *	described in the TDLS (802.11z) specification.
+ * @NL80211_ATTR_TDLS_DIALOG_TOKEN: Non-zero token for uniquely identifying a
+ *	TDLS conversation between two devices.
+ * @NL80211_ATTR_TDLS_OPERATION: High level TDLS operation; see
+ *	&enum nl80211_tdls_operation, represented as a u8.
+ * @NL80211_ATTR_TDLS_SUPPORT: A flag indicating the device can operate
+ *	as a TDLS peer sta.
+ * @NL80211_ATTR_TDLS_EXTERNAL_SETUP: The TDLS discovery/setup and teardown
+ *	procedures should be performed by sending TDLS packets via
+ *	%NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be
+ *	used for asking the driver to perform a TDLS operation.
+ *
+ * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices
+ *	that have AP support to indicate that they have the AP SME integrated
+ *	with support for the features listed in this attribute, see
+ *	&enum nl80211_ap_sme_features.
+ *
+ * @NL80211_ATTR_DONT_WAIT_FOR_ACK: Used with %NL80211_CMD_FRAME, this tells
+ *	the driver to not wait for an acknowledgement. Note that due to this,
+ *	it will also not give a status callback nor return a cookie. This is
+ *	mostly useful for probe responses to save airtime.
+ *
+ * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from
+ *	&enum nl80211_feature_flags and is advertised in wiphy information.
+ * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe
+ *	requests while operating in AP-mode.
+ *	This attribute holds a bitmap of the supported protocols for
+ *	offloading (see &enum nl80211_probe_resp_offload_support_attr).
+ *
+ * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire
+ *	probe-response frame. The DA field in the 802.11 header is zero-ed out,
+ *	to be filled by the FW.
+ * @NL80211_ATTR_DISABLE_HT:  Force HT capable interfaces to disable
+ *      this feature.  Currently, only supported in mac80211 drivers.
+ * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the
+ *      ATTR_HT_CAPABILITY to which attention should be paid.
+ *      Currently, only mac80211 NICs support this feature.
+ *      The values that may be configured are:
+ *       MCS rates, MAX-AMSDU, HT-20-40 and HT_CAP_SGI_40
+ *       AMPDU density and AMPDU factor.
+ *      All values are treated as suggestions and may be ignored
+ *      by the driver as required.  The actual values may be seen in
+ *      the station debugfs ht_caps file.
+ *
+ * @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country
+ *    abides to when initiating radiation on DFS channels. A country maps
+ *    to one DFS region.
+ *
+ * @NL80211_ATTR_NOACK_MAP: This u16 bitmap contains the No Ack Policy of
+ *      up to 16 TIDs.
+ *
+ * @NL80211_ATTR_INACTIVITY_TIMEOUT: timeout value in seconds, this can be
+ *	used by the drivers which has MLME in firmware and does not have support
+ *	to report per station tx/rx activity to free up the staion entry from
+ *	the list. This needs to be used when the driver advertises the
+ *	capability to timeout the stations.
+ *
+ * @NL80211_ATTR_RX_SIGNAL_DBM: signal strength in dBm (as a 32-bit int);
+ *	this attribute is (depending on the driver capabilities) added to
+ *	received frames indicated with %NL80211_CMD_FRAME.
+ *
+ * @NL80211_ATTR_BG_SCAN_PERIOD: Background scan period in seconds
+ *      or 0 to disable background scan.
+ *
+ * @NL80211_ATTR_USER_REG_HINT_TYPE: type of regulatory hint passed from
+ *	userspace. If unset it is assumed the hint comes directly from
+ *	a user. If set code could specify exactly what type of source
+ *	was used to provide the hint. For the different types of
+ *	allowed user regulatory hints see nl80211_user_reg_hint_type.
+ *
+ * @NL80211_ATTR_CONN_FAILED_REASON: The reason for which AP has rejected
+ *	the connection request from a station. nl80211_connect_failed_reason
+ *	enum has different reasons of connection failure.
+ *
+ * @NL80211_ATTR_MAX: highest attribute number currently defined
+ * @__NL80211_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_attrs {
+/* don't change the order or add anything between, this is ABI! */
+	NL80211_ATTR_UNSPEC,
+
+	NL80211_ATTR_WIPHY,
+	NL80211_ATTR_WIPHY_NAME,
+
+	NL80211_ATTR_IFINDEX,
+	NL80211_ATTR_IFNAME,
+	NL80211_ATTR_IFTYPE,
+
+	NL80211_ATTR_MAC,
+
+	NL80211_ATTR_KEY_DATA,
+	NL80211_ATTR_KEY_IDX,
+	NL80211_ATTR_KEY_CIPHER,
+	NL80211_ATTR_KEY_SEQ,
+	NL80211_ATTR_KEY_DEFAULT,
+
+	NL80211_ATTR_BEACON_INTERVAL,
+	NL80211_ATTR_DTIM_PERIOD,
+	NL80211_ATTR_BEACON_HEAD,
+	NL80211_ATTR_BEACON_TAIL,
+
+	NL80211_ATTR_STA_AID,
+	NL80211_ATTR_STA_FLAGS,
+	NL80211_ATTR_STA_LISTEN_INTERVAL,
+	NL80211_ATTR_STA_SUPPORTED_RATES,
+	NL80211_ATTR_STA_VLAN,
+	NL80211_ATTR_STA_INFO,
+
+	NL80211_ATTR_WIPHY_BANDS,
+
+	NL80211_ATTR_MNTR_FLAGS,
+
+	NL80211_ATTR_MESH_ID,
+	NL80211_ATTR_STA_PLINK_ACTION,
+	NL80211_ATTR_MPATH_NEXT_HOP,
+	NL80211_ATTR_MPATH_INFO,
+
+	NL80211_ATTR_BSS_CTS_PROT,
+	NL80211_ATTR_BSS_SHORT_PREAMBLE,
+	NL80211_ATTR_BSS_SHORT_SLOT_TIME,
+
+	NL80211_ATTR_HT_CAPABILITY,
+
+	NL80211_ATTR_SUPPORTED_IFTYPES,
+
+	NL80211_ATTR_REG_ALPHA2,
+	NL80211_ATTR_REG_RULES,
+
+	NL80211_ATTR_MESH_CONFIG,
+
+	NL80211_ATTR_BSS_BASIC_RATES,
+
+	NL80211_ATTR_WIPHY_TXQ_PARAMS,
+	NL80211_ATTR_WIPHY_FREQ,
+	NL80211_ATTR_WIPHY_CHANNEL_TYPE,
+
+	NL80211_ATTR_KEY_DEFAULT_MGMT,
+
+	NL80211_ATTR_MGMT_SUBTYPE,
+	NL80211_ATTR_IE,
+
+	NL80211_ATTR_MAX_NUM_SCAN_SSIDS,
+
+	NL80211_ATTR_SCAN_FREQUENCIES,
+	NL80211_ATTR_SCAN_SSIDS,
+	NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */
+	NL80211_ATTR_BSS,
+
+	NL80211_ATTR_REG_INITIATOR,
+	NL80211_ATTR_REG_TYPE,
+
+	NL80211_ATTR_SUPPORTED_COMMANDS,
+
+	NL80211_ATTR_FRAME,
+	NL80211_ATTR_SSID,
+	NL80211_ATTR_AUTH_TYPE,
+	NL80211_ATTR_REASON_CODE,
+
+	NL80211_ATTR_KEY_TYPE,
+
+	NL80211_ATTR_MAX_SCAN_IE_LEN,
+	NL80211_ATTR_CIPHER_SUITES,
+
+	NL80211_ATTR_FREQ_BEFORE,
+	NL80211_ATTR_FREQ_AFTER,
+
+	NL80211_ATTR_FREQ_FIXED,
+
+
+	NL80211_ATTR_WIPHY_RETRY_SHORT,
+	NL80211_ATTR_WIPHY_RETRY_LONG,
+	NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
+	NL80211_ATTR_WIPHY_RTS_THRESHOLD,
+
+	NL80211_ATTR_TIMED_OUT,
+
+	NL80211_ATTR_USE_MFP,
+
+	NL80211_ATTR_STA_FLAGS2,
+
+	NL80211_ATTR_CONTROL_PORT,
+
+	NL80211_ATTR_TESTDATA,
+
+	NL80211_ATTR_PRIVACY,
+
+	NL80211_ATTR_DISCONNECTED_BY_AP,
+	NL80211_ATTR_STATUS_CODE,
+
+	NL80211_ATTR_CIPHER_SUITES_PAIRWISE,
+	NL80211_ATTR_CIPHER_SUITE_GROUP,
+	NL80211_ATTR_WPA_VERSIONS,
+	NL80211_ATTR_AKM_SUITES,
+
+	NL80211_ATTR_REQ_IE,
+	NL80211_ATTR_RESP_IE,
+
+	NL80211_ATTR_PREV_BSSID,
+
+	NL80211_ATTR_KEY,
+	NL80211_ATTR_KEYS,
+
+	NL80211_ATTR_PID,
+
+	NL80211_ATTR_4ADDR,
+
+	NL80211_ATTR_SURVEY_INFO,
+
+	NL80211_ATTR_PMKID,
+	NL80211_ATTR_MAX_NUM_PMKIDS,
+
+	NL80211_ATTR_DURATION,
+
+	NL80211_ATTR_COOKIE,
+
+	NL80211_ATTR_WIPHY_COVERAGE_CLASS,
+
+	NL80211_ATTR_TX_RATES,
+
+	NL80211_ATTR_FRAME_MATCH,
+
+	NL80211_ATTR_ACK,
+
+	NL80211_ATTR_PS_STATE,
+
+	NL80211_ATTR_CQM,
+
+	NL80211_ATTR_LOCAL_STATE_CHANGE,
+
+	NL80211_ATTR_AP_ISOLATE,
+
+	NL80211_ATTR_WIPHY_TX_POWER_SETTING,
+	NL80211_ATTR_WIPHY_TX_POWER_LEVEL,
+
+	NL80211_ATTR_TX_FRAME_TYPES,
+	NL80211_ATTR_RX_FRAME_TYPES,
+	NL80211_ATTR_FRAME_TYPE,
+
+	NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
+	NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
+
+	NL80211_ATTR_SUPPORT_IBSS_RSN,
+
+	NL80211_ATTR_WIPHY_ANTENNA_TX,
+	NL80211_ATTR_WIPHY_ANTENNA_RX,
+
+	NL80211_ATTR_MCAST_RATE,
+
+	NL80211_ATTR_OFFCHANNEL_TX_OK,
+
+	NL80211_ATTR_BSS_HT_OPMODE,
+
+	NL80211_ATTR_KEY_DEFAULT_TYPES,
+
+	NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION,
+
+	NL80211_ATTR_MESH_SETUP,
+
+	NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX,
+	NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX,
+
+	NL80211_ATTR_SUPPORT_MESH_AUTH,
+	NL80211_ATTR_STA_PLINK_STATE,
+
+	NL80211_ATTR_WOWLAN_TRIGGERS,
+	NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED,
+
+	NL80211_ATTR_SCHED_SCAN_INTERVAL,
+
+	NL80211_ATTR_INTERFACE_COMBINATIONS,
+	NL80211_ATTR_SOFTWARE_IFTYPES,
+
+	NL80211_ATTR_REKEY_DATA,
+
+	NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS,
+	NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN,
+
+	NL80211_ATTR_SCAN_SUPP_RATES,
+
+	NL80211_ATTR_HIDDEN_SSID,
+
+	NL80211_ATTR_IE_PROBE_RESP,
+	NL80211_ATTR_IE_ASSOC_RESP,
+
+	NL80211_ATTR_STA_WME,
+	NL80211_ATTR_SUPPORT_AP_UAPSD,
+
+	NL80211_ATTR_ROAM_SUPPORT,
+
+	NL80211_ATTR_SCHED_SCAN_MATCH,
+	NL80211_ATTR_MAX_MATCH_SETS,
+
+	NL80211_ATTR_PMKSA_CANDIDATE,
+
+	NL80211_ATTR_TX_NO_CCK_RATE,
+
+	NL80211_ATTR_TDLS_ACTION,
+	NL80211_ATTR_TDLS_DIALOG_TOKEN,
+	NL80211_ATTR_TDLS_OPERATION,
+	NL80211_ATTR_TDLS_SUPPORT,
+	NL80211_ATTR_TDLS_EXTERNAL_SETUP,
+
+	NL80211_ATTR_DEVICE_AP_SME,
+
+	NL80211_ATTR_DONT_WAIT_FOR_ACK,
+
+	NL80211_ATTR_FEATURE_FLAGS,
+
+	NL80211_ATTR_PROBE_RESP_OFFLOAD,
+
+	NL80211_ATTR_PROBE_RESP,
+
+	NL80211_ATTR_DFS_REGION,
+
+	NL80211_ATTR_DISABLE_HT,
+	NL80211_ATTR_HT_CAPABILITY_MASK,
+
+	NL80211_ATTR_NOACK_MAP,
+
+	NL80211_ATTR_INACTIVITY_TIMEOUT,
+
+	NL80211_ATTR_RX_SIGNAL_DBM,
+
+	NL80211_ATTR_BG_SCAN_PERIOD,
+
+	NL80211_ATTR_WDEV,
+
+	NL80211_ATTR_USER_REG_HINT_TYPE,
+
+	NL80211_ATTR_CONN_FAILED_REASON,
+
+	/* add attributes here, update the policy in nl80211.c */
+
+	__NL80211_ATTR_AFTER_LAST,
+	NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1
+};
+
+/* source-level API compatibility */
+#define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION
+#define	NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG
+
+/*
+ * Allow user space programs to use #ifdef on new attributes by defining them
+ * here
+ */
+#define NL80211_CMD_CONNECT NL80211_CMD_CONNECT
+#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY
+#define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES
+#define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS
+#define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ
+#define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE
+#define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE
+#define NL80211_ATTR_IE NL80211_ATTR_IE
+#define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR
+#define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE
+#define NL80211_ATTR_FRAME NL80211_ATTR_FRAME
+#define NL80211_ATTR_SSID NL80211_ATTR_SSID
+#define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE
+#define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE
+#define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE
+#define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP
+#define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS
+#define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES
+#define NL80211_ATTR_KEY NL80211_ATTR_KEY
+#define NL80211_ATTR_KEYS NL80211_ATTR_KEYS
+#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
+
+#define NL80211_MAX_SUPP_RATES			32
+#define NL80211_MAX_SUPP_HT_RATES		77
+#define NL80211_MAX_SUPP_REG_RULES		32
+#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY	0
+#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY	16
+#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY	24
+#define NL80211_HT_CAPABILITY_LEN		26
+
+#define NL80211_MAX_NR_CIPHER_SUITES		5
+#define NL80211_MAX_NR_AKM_SUITES		2
+
+#define NL80211_MIN_REMAIN_ON_CHANNEL_TIME	10
+
+/* default RSSI threshold for scan results if none specified. */
+#define NL80211_SCAN_RSSI_THOLD_OFF		-300
+
+#define NL80211_CQM_TXE_MAX_INTVL		1800
+
+/**
+ * enum nl80211_iftype - (virtual) interface types
+ *
+ * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides
+ * @NL80211_IFTYPE_ADHOC: independent BSS member
+ * @NL80211_IFTYPE_STATION: managed BSS member
+ * @NL80211_IFTYPE_AP: access point
+ * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces
+ *	are a bit special in that they must always be tied to a pre-existing
+ *	AP type interface.
+ * @NL80211_IFTYPE_WDS: wireless distribution interface
+ * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
+ * @NL80211_IFTYPE_MESH_POINT: mesh point
+ * @NL80211_IFTYPE_P2P_CLIENT: P2P client
+ * @NL80211_IFTYPE_P2P_GO: P2P group owner
+ * @NL80211_IFTYPE_P2P_DEVICE: P2P device interface type, this is not a netdev
+ *	and therefore can't be created in the normal ways, use the
+ *	%NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE
+ *	commands to create and destroy one
+ * @NL80211_IFTYPE_MAX: highest interface type number currently defined
+ * @NUM_NL80211_IFTYPES: number of defined interface types
+ *
+ * These values are used with the %NL80211_ATTR_IFTYPE
+ * to set the type of an interface.
+ *
+ */
+enum nl80211_iftype {
+	NL80211_IFTYPE_UNSPECIFIED,
+	NL80211_IFTYPE_ADHOC,
+	NL80211_IFTYPE_STATION,
+	NL80211_IFTYPE_AP,
+	NL80211_IFTYPE_AP_VLAN,
+	NL80211_IFTYPE_WDS,
+	NL80211_IFTYPE_MONITOR,
+	NL80211_IFTYPE_MESH_POINT,
+	NL80211_IFTYPE_P2P_CLIENT,
+	NL80211_IFTYPE_P2P_GO,
+	NL80211_IFTYPE_P2P_DEVICE,
+
+	/* keep last */
+	NUM_NL80211_IFTYPES,
+	NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 1
+};
+
+/**
+ * enum nl80211_sta_flags - station flags
+ *
+ * Station flags. When a station is added to an AP interface, it is
+ * assumed to be already associated (and hence authenticated.)
+ *
+ * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved
+ * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X)
+ * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames
+ *	with short barker preamble
+ * @NL80211_STA_FLAG_WME: station is WME/QoS capable
+ * @NL80211_STA_FLAG_MFP: station uses management frame protection
+ * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated
+ * @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer -- this flag should
+ *	only be used in managed mode (even in the flags mask). Note that the
+ *	flag can't be changed, it is only valid while adding a station, and
+ *	attempts to change it will silently be ignored (rather than rejected
+ *	as errors.)
+ * @NL80211_STA_FLAG_MAX: highest station flag number currently defined
+ * @__NL80211_STA_FLAG_AFTER_LAST: internal use
+ */
+enum nl80211_sta_flags {
+	__NL80211_STA_FLAG_INVALID,
+	NL80211_STA_FLAG_AUTHORIZED,
+	NL80211_STA_FLAG_SHORT_PREAMBLE,
+	NL80211_STA_FLAG_WME,
+	NL80211_STA_FLAG_MFP,
+	NL80211_STA_FLAG_AUTHENTICATED,
+	NL80211_STA_FLAG_TDLS_PEER,
+
+	/* keep last */
+	__NL80211_STA_FLAG_AFTER_LAST,
+	NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1
+};
+
+#define NL80211_STA_FLAG_MAX_OLD_API	NL80211_STA_FLAG_TDLS_PEER
+
+/**
+ * struct nl80211_sta_flag_update - station flags mask/set
+ * @mask: mask of station flags to set
+ * @set: which values to set them to
+ *
+ * Both mask and set contain bits as per &enum nl80211_sta_flags.
+ */
+struct nl80211_sta_flag_update {
+	__u32 mask;
+	__u32 set;
+} __attribute__((packed));
+
+/**
+ * enum nl80211_rate_info - bitrate information
+ *
+ * These attribute types are used with %NL80211_STA_INFO_TXRATE
+ * when getting information about the bitrate of a station.
+ * There are 2 attributes for bitrate, a legacy one that represents
+ * a 16-bit value, and new one that represents a 32-bit value.
+ * If the rate value fits into 16 bit, both attributes are reported
+ * with the same value. If the rate is too high to fit into 16 bits
+ * (>6.5535Gbps) only 32-bit attribute is included.
+ * User space tools encouraged to use the 32-bit attribute and fall
+ * back to the 16-bit one for compatibility with older kernels.
+ *
+ * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
+ * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s)
+ * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8)
+ * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate
+ * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval
+ * @NL80211_RATE_INFO_BITRATE32: total bitrate (u32, 100kbit/s)
+ * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined
+ * @__NL80211_RATE_INFO_AFTER_LAST: internal use
+ */
+enum nl80211_rate_info {
+	__NL80211_RATE_INFO_INVALID,
+	NL80211_RATE_INFO_BITRATE,
+	NL80211_RATE_INFO_MCS,
+	NL80211_RATE_INFO_40_MHZ_WIDTH,
+	NL80211_RATE_INFO_SHORT_GI,
+	NL80211_RATE_INFO_BITRATE32,
+
+	/* keep last */
+	__NL80211_RATE_INFO_AFTER_LAST,
+	NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_sta_bss_param - BSS information collected by STA
+ *
+ * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM
+ * when getting information about the bitrate of a station.
+ *
+ * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved
+ * @NL80211_STA_BSS_PARAM_CTS_PROT: whether CTS protection is enabled (flag)
+ * @NL80211_STA_BSS_PARAM_SHORT_PREAMBLE:  whether short preamble is enabled
+ *	(flag)
+ * @NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME:  whether short slot time is enabled
+ *	(flag)
+ * @NL80211_STA_BSS_PARAM_DTIM_PERIOD: DTIM period for beaconing (u8)
+ * @NL80211_STA_BSS_PARAM_BEACON_INTERVAL: Beacon interval (u16)
+ * @NL80211_STA_BSS_PARAM_MAX: highest sta_bss_param number currently defined
+ * @__NL80211_STA_BSS_PARAM_AFTER_LAST: internal use
+ */
+enum nl80211_sta_bss_param {
+	__NL80211_STA_BSS_PARAM_INVALID,
+	NL80211_STA_BSS_PARAM_CTS_PROT,
+	NL80211_STA_BSS_PARAM_SHORT_PREAMBLE,
+	NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME,
+	NL80211_STA_BSS_PARAM_DTIM_PERIOD,
+	NL80211_STA_BSS_PARAM_BEACON_INTERVAL,
+
+	/* keep last */
+	__NL80211_STA_BSS_PARAM_AFTER_LAST,
+	NL80211_STA_BSS_PARAM_MAX = __NL80211_STA_BSS_PARAM_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_sta_info - station information
+ *
+ * These attribute types are used with %NL80211_ATTR_STA_INFO
+ * when getting information about a station.
+ *
+ * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved
+ * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
+ * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
+ * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
+ * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
+ * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
+ * 	containing info as possible, see &enum nl80211_rate_info
+ * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
+ * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this
+ *	station)
+ * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
+ * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
+ * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)
+ * @NL80211_STA_INFO_LLID: the station's mesh LLID
+ * @NL80211_STA_INFO_PLID: the station's mesh PLID
+ * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station
+ *	(see %enum nl80211_plink_state)
+ * @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested
+ *	attribute, like NL80211_STA_INFO_TX_BITRATE.
+ * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute
+ *     containing info as possible, see &enum nl80211_sta_bss_param
+ * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected
+ * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update.
+ * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32)
+ * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64)
+ * @__NL80211_STA_INFO_AFTER_LAST: internal
+ * @NL80211_STA_INFO_MAX: highest possible station info attribute
+ */
+enum nl80211_sta_info {
+	__NL80211_STA_INFO_INVALID,
+	NL80211_STA_INFO_INACTIVE_TIME,
+	NL80211_STA_INFO_RX_BYTES,
+	NL80211_STA_INFO_TX_BYTES,
+	NL80211_STA_INFO_LLID,
+	NL80211_STA_INFO_PLID,
+	NL80211_STA_INFO_PLINK_STATE,
+	NL80211_STA_INFO_SIGNAL,
+	NL80211_STA_INFO_TX_BITRATE,
+	NL80211_STA_INFO_RX_PACKETS,
+	NL80211_STA_INFO_TX_PACKETS,
+	NL80211_STA_INFO_TX_RETRIES,
+	NL80211_STA_INFO_TX_FAILED,
+	NL80211_STA_INFO_SIGNAL_AVG,
+	NL80211_STA_INFO_RX_BITRATE,
+	NL80211_STA_INFO_BSS_PARAM,
+	NL80211_STA_INFO_CONNECTED_TIME,
+	NL80211_STA_INFO_STA_FLAGS,
+	NL80211_STA_INFO_BEACON_LOSS,
+	NL80211_STA_INFO_T_OFFSET,
+
+	/* keep last */
+	__NL80211_STA_INFO_AFTER_LAST,
+	NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_mpath_flags - nl80211 mesh path flags
+ *
+ * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
+ * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running
+ * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN
+ * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set
+ * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded
+ */
+enum nl80211_mpath_flags {
+	NL80211_MPATH_FLAG_ACTIVE =	1<<0,
+	NL80211_MPATH_FLAG_RESOLVING =	1<<1,
+	NL80211_MPATH_FLAG_SN_VALID =	1<<2,
+	NL80211_MPATH_FLAG_FIXED =	1<<3,
+	NL80211_MPATH_FLAG_RESOLVED =	1<<4,
+};
+
+/**
+ * enum nl80211_mpath_info - mesh path information
+ *
+ * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting
+ * information about a mesh path.
+ *
+ * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved
+ * @NL80211_MPATH_INFO_FRAME_QLEN: number of queued frames for this destination
+ * @NL80211_MPATH_INFO_SN: destination sequence number
+ * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path
+ * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now
+ * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in
+ * 	&enum nl80211_mpath_flags;
+ * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
+ * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries
+ * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number
+ *	currently defind
+ * @__NL80211_MPATH_INFO_AFTER_LAST: internal use
+ */
+enum nl80211_mpath_info {
+	__NL80211_MPATH_INFO_INVALID,
+	NL80211_MPATH_INFO_FRAME_QLEN,
+	NL80211_MPATH_INFO_SN,
+	NL80211_MPATH_INFO_METRIC,
+	NL80211_MPATH_INFO_EXPTIME,
+	NL80211_MPATH_INFO_FLAGS,
+	NL80211_MPATH_INFO_DISCOVERY_TIMEOUT,
+	NL80211_MPATH_INFO_DISCOVERY_RETRIES,
+
+	/* keep last */
+	__NL80211_MPATH_INFO_AFTER_LAST,
+	NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_band_attr - band attributes
+ * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band,
+ *	an array of nested frequency attributes
+ * @NL80211_BAND_ATTR_RATES: supported bitrates in this band,
+ *	an array of nested bitrate attributes
+ * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as
+ *	defined in 802.11n
+ * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE
+ * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n
+ * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n
+ * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as
+ *	defined in 802.11ac
+ * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE
+ * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
+ * @__NL80211_BAND_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_band_attr {
+	__NL80211_BAND_ATTR_INVALID,
+	NL80211_BAND_ATTR_FREQS,
+	NL80211_BAND_ATTR_RATES,
+
+	NL80211_BAND_ATTR_HT_MCS_SET,
+	NL80211_BAND_ATTR_HT_CAPA,
+	NL80211_BAND_ATTR_HT_AMPDU_FACTOR,
+	NL80211_BAND_ATTR_HT_AMPDU_DENSITY,
+
+	NL80211_BAND_ATTR_VHT_MCS_SET,
+	NL80211_BAND_ATTR_VHT_CAPA,
+
+	/* keep last */
+	__NL80211_BAND_ATTR_AFTER_LAST,
+	NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1
+};
+
+#define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA
+
+/**
+ * enum nl80211_frequency_attr - frequency attributes
+ * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz
+ * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current
+ *	regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_PASSIVE_SCAN: Only passive scanning is
+ *	permitted on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_NO_IBSS: IBSS networks are not permitted
+ *	on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory
+ *	on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
+ *	(100 * dBm).
+ * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
+ *	currently defined
+ * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_frequency_attr {
+	__NL80211_FREQUENCY_ATTR_INVALID,
+	NL80211_FREQUENCY_ATTR_FREQ,
+	NL80211_FREQUENCY_ATTR_DISABLED,
+	NL80211_FREQUENCY_ATTR_PASSIVE_SCAN,
+	NL80211_FREQUENCY_ATTR_NO_IBSS,
+	NL80211_FREQUENCY_ATTR_RADAR,
+	NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
+
+	/* keep last */
+	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
+	NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1
+};
+
+#define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER
+
+/**
+ * enum nl80211_bitrate_attr - bitrate attributes
+ * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps
+ * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported
+ *	in 2.4 GHz band.
+ * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number
+ *	currently defined
+ * @__NL80211_BITRATE_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_bitrate_attr {
+	__NL80211_BITRATE_ATTR_INVALID,
+	NL80211_BITRATE_ATTR_RATE,
+	NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE,
+
+	/* keep last */
+	__NL80211_BITRATE_ATTR_AFTER_LAST,
+	NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_initiator - Indicates the initiator of a reg domain request
+ * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world
+ * 	regulatory domain.
+ * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the
+ * 	regulatory domain.
+ * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the
+ * 	wireless core it thinks its knows the regulatory domain we should be in.
+ * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an
+ * 	802.11 country information element with regulatory information it
+ * 	thinks we should consider. cfg80211 only processes the country
+ *	code from the IE, and relies on the regulatory domain information
+ *	structure passed by userspace (CRDA) from our wireless-regdb.
+ *	If a channel is enabled but the country code indicates it should
+ *	be disabled we disable the channel and re-enable it upon disassociation.
+ */
+enum nl80211_reg_initiator {
+	NL80211_REGDOM_SET_BY_CORE,
+	NL80211_REGDOM_SET_BY_USER,
+	NL80211_REGDOM_SET_BY_DRIVER,
+	NL80211_REGDOM_SET_BY_COUNTRY_IE,
+};
+
+/**
+ * enum nl80211_reg_type - specifies the type of regulatory domain
+ * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains
+ *	to a specific country. When this is set you can count on the
+ *	ISO / IEC 3166 alpha2 country code being valid.
+ * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory
+ * 	domain.
+ * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom
+ * 	driver specific world regulatory domain. These do not apply system-wide
+ * 	and are only applicable to the individual devices which have requested
+ * 	them to be applied.
+ * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product
+ *	of an intersection between two regulatory domains -- the previously
+ *	set regulatory domain on the system and the last accepted regulatory
+ *	domain request to be processed.
+ */
+enum nl80211_reg_type {
+	NL80211_REGDOM_TYPE_COUNTRY,
+	NL80211_REGDOM_TYPE_WORLD,
+	NL80211_REGDOM_TYPE_CUSTOM_WORLD,
+	NL80211_REGDOM_TYPE_INTERSECTION,
+};
+
+/**
+ * enum nl80211_reg_rule_attr - regulatory rule attributes
+ * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional
+ * 	considerations for a given frequency range. These are the
+ * 	&enum nl80211_reg_rule_flags.
+ * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory
+ * 	rule in KHz. This is not a center of frequency but an actual regulatory
+ * 	band edge.
+ * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule
+ * 	in KHz. This is not a center a frequency but an actual regulatory
+ * 	band edge.
+ * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
+ * 	frequency range, in KHz.
+ * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
+ * 	for a given frequency range. The value is in mBi (100 * dBi).
+ * 	If you don't have one then don't send this.
+ * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
+ * 	a given frequency range. The value is in mBm (100 * dBm).
+ * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
+ *	currently defined
+ * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_reg_rule_attr {
+	__NL80211_REG_RULE_ATTR_INVALID,
+	NL80211_ATTR_REG_RULE_FLAGS,
+
+	NL80211_ATTR_FREQ_RANGE_START,
+	NL80211_ATTR_FREQ_RANGE_END,
+	NL80211_ATTR_FREQ_RANGE_MAX_BW,
+
+	NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN,
+	NL80211_ATTR_POWER_RULE_MAX_EIRP,
+
+	/* keep last */
+	__NL80211_REG_RULE_ATTR_AFTER_LAST,
+	NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_sched_scan_match_attr - scheduled scan match attributes
+ * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
+ * only report BSS with matching SSID.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a
+ *	BSS in scan results. Filtering is turned off if not specified.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
+ *	attribute number currently defined
+ * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_sched_scan_match_attr {
+	__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID,
+
+	NL80211_SCHED_SCAN_MATCH_ATTR_SSID,
+	NL80211_SCHED_SCAN_MATCH_ATTR_RSSI,
+
+	/* keep last */
+	__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
+	NL80211_SCHED_SCAN_MATCH_ATTR_MAX =
+		__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1
+};
+
+/* only for backward compatibility */
+#define NL80211_ATTR_SCHED_SCAN_MATCH_SSID NL80211_SCHED_SCAN_MATCH_ATTR_SSID
+
+/**
+ * enum nl80211_reg_rule_flags - regulatory rule flags
+ *
+ * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed
+ * @NL80211_RRF_NO_CCK: CCK modulation not allowed
+ * @NL80211_RRF_NO_INDOOR: indoor operation not allowed
+ * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed
+ * @NL80211_RRF_DFS: DFS support is required to be used
+ * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links
+ * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links
+ * @NL80211_RRF_PASSIVE_SCAN: passive scan is required
+ * @NL80211_RRF_NO_IBSS: no IBSS is allowed
+ */
+enum nl80211_reg_rule_flags {
+	NL80211_RRF_NO_OFDM		= 1<<0,
+	NL80211_RRF_NO_CCK		= 1<<1,
+	NL80211_RRF_NO_INDOOR		= 1<<2,
+	NL80211_RRF_NO_OUTDOOR		= 1<<3,
+	NL80211_RRF_DFS			= 1<<4,
+	NL80211_RRF_PTP_ONLY		= 1<<5,
+	NL80211_RRF_PTMP_ONLY		= 1<<6,
+	NL80211_RRF_PASSIVE_SCAN	= 1<<7,
+	NL80211_RRF_NO_IBSS		= 1<<8,
+};
+
+/**
+ * enum nl80211_dfs_regions - regulatory DFS regions
+ *
+ * @NL80211_DFS_UNSET: Country has no DFS master region specified
+ * @NL80211_DFS_FCC: Country follows DFS master rules from FCC
+ * @NL80211_DFS_ETSI: Country follows DFS master rules from ETSI
+ * @NL80211_DFS_JP: Country follows DFS master rules from JP/MKK/Telec
+ */
+enum nl80211_dfs_regions {
+	NL80211_DFS_UNSET	= 0,
+	NL80211_DFS_FCC		= 1,
+	NL80211_DFS_ETSI	= 2,
+	NL80211_DFS_JP		= 3,
+};
+
+/**
+ * enum nl80211_user_reg_hint_type - type of user regulatory hint
+ *
+ * @NL80211_USER_REG_HINT_USER: a user sent the hint. This is always
+ *	assumed if the attribute is not set.
+ * @NL80211_USER_REG_HINT_CELL_BASE: the hint comes from a cellular
+ *	base station. Device drivers that have been tested to work
+ *	properly to support this type of hint can enable these hints
+ *	by setting the NL80211_FEATURE_CELL_BASE_REG_HINTS feature
+ *	capability on the struct wiphy. The wireless core will
+ *	ignore all cell base station hints until at least one device
+ *	present has been registered with the wireless core that
+ *	has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a
+ *	supported feature.
+ */
+enum nl80211_user_reg_hint_type {
+	NL80211_USER_REG_HINT_USER	= 0,
+	NL80211_USER_REG_HINT_CELL_BASE = 1,
+};
+
+/**
+ * enum nl80211_survey_info - survey information
+ *
+ * These attribute types are used with %NL80211_ATTR_SURVEY_INFO
+ * when getting information about a survey.
+ *
+ * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved
+ * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
+ * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
+ * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio
+ *	spent on this channel
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary
+ *	channel was sensed busy (either due to activity or energy detect)
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension
+ *	channel was sensed busy
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent
+ *	receiving data
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent
+ *	transmitting data
+ * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
+ *	currently defined
+ * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
+ */
+enum nl80211_survey_info {
+	__NL80211_SURVEY_INFO_INVALID,
+	NL80211_SURVEY_INFO_FREQUENCY,
+	NL80211_SURVEY_INFO_NOISE,
+	NL80211_SURVEY_INFO_IN_USE,
+	NL80211_SURVEY_INFO_CHANNEL_TIME,
+	NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY,
+	NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY,
+	NL80211_SURVEY_INFO_CHANNEL_TIME_RX,
+	NL80211_SURVEY_INFO_CHANNEL_TIME_TX,
+
+	/* keep last */
+	__NL80211_SURVEY_INFO_AFTER_LAST,
+	NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_mntr_flags - monitor configuration flags
+ *
+ * Monitor configuration flags.
+ *
+ * @__NL80211_MNTR_FLAG_INVALID: reserved
+ *
+ * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS
+ * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP
+ * @NL80211_MNTR_FLAG_CONTROL: pass control frames
+ * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering
+ * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing.
+ *	overrides all other flags.
+ *
+ * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use
+ * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag
+ */
+enum nl80211_mntr_flags {
+	__NL80211_MNTR_FLAG_INVALID,
+	NL80211_MNTR_FLAG_FCSFAIL,
+	NL80211_MNTR_FLAG_PLCPFAIL,
+	NL80211_MNTR_FLAG_CONTROL,
+	NL80211_MNTR_FLAG_OTHER_BSS,
+	NL80211_MNTR_FLAG_COOK_FRAMES,
+
+	/* keep last */
+	__NL80211_MNTR_FLAG_AFTER_LAST,
+	NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_meshconf_params - mesh configuration parameters
+ *
+ * Mesh configuration parameters. These can be changed while the mesh is
+ * active.
+ *
+ * @__NL80211_MESHCONF_INVALID: internal use
+ *
+ * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in
+ *	millisecond units, used by the Peer Link Open message
+ *
+ * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in
+ *	millisecond units, used by the peer link management to close a peer link
+ *
+ * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in
+ *	millisecond units
+ *
+ * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed
+ *	on this mesh interface
+ *
+ * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link
+ *	open retries that can be sent to establish a new peer link instance in a
+ *	mesh
+ *
+ * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh
+ *	point.
+ *
+ * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically
+ *	open peer links when we detect compatible mesh peers.
+ *
+ * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames
+ *	containing a PREQ that an MP can send to a particular destination (path
+ *	target)
+ *
+ * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths
+ *	(in milliseconds)
+ *
+ * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait
+ *	until giving up on a path discovery (in milliseconds)
+ *
+ * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh
+ *	points receiving a PREQ shall consider the forwarding information from
+ *	the root to be valid. (TU = time unit)
+ *
+ * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in
+ *	TUs) during which an MP can send only one action frame containing a PREQ
+ *	reference element
+ *
+ * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
+ *	that it takes for an HWMP information element to propagate across the
+ *	mesh
+ *
+ * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not
+ *
+ * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a
+ *	source mesh point for path selection elements.
+ *
+ * @NL80211_MESHCONF_HWMP_RANN_INTERVAL:  The interval of time (in TUs) between
+ *	root announcements are transmitted.
+ *
+ * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has
+ *	access to a broader network beyond the MBSS.  This is done via Root
+ *	Announcement frames.
+ *
+ * @NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL: The minimum interval of time (in
+ *	TUs) during which a mesh STA can send only one Action frame containing a
+ *	PERR element.
+ *
+ * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding
+ *	or forwarding entity (default is TRUE - forwarding entity)
+ *
+ * @NL80211_MESHCONF_RSSI_THRESHOLD: RSSI threshold in dBm. This specifies the
+ *	threshold for average signal strength of candidate station to establish
+ *	a peer link.
+ *
+ * @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors
+ *	to synchronize to for 11s default synchronization method
+ *	(see 11C.12.2.2)
+ *
+ * @NL80211_MESHCONF_HT_OPMODE: set mesh HT protection mode.
+ *
+ * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
+ *
+ * @NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT: The time (in TUs) for
+ *	which mesh STAs receiving a proactive PREQ shall consider the forwarding
+ *	information to the root mesh STA to be valid.
+ *
+ * @NL80211_MESHCONF_HWMP_ROOT_INTERVAL: The interval of time (in TUs) between
+ *	proactive PREQs are transmitted.
+ *
+ * @NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL: The minimum interval of time
+ *	(in TUs) during which a mesh STA can send only one Action frame
+ *	containing a PREQ element for root path confirmation.
+ *
+ * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_meshconf_params {
+	__NL80211_MESHCONF_INVALID,
+	NL80211_MESHCONF_RETRY_TIMEOUT,
+	NL80211_MESHCONF_CONFIRM_TIMEOUT,
+	NL80211_MESHCONF_HOLDING_TIMEOUT,
+	NL80211_MESHCONF_MAX_PEER_LINKS,
+	NL80211_MESHCONF_MAX_RETRIES,
+	NL80211_MESHCONF_TTL,
+	NL80211_MESHCONF_AUTO_OPEN_PLINKS,
+	NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
+	NL80211_MESHCONF_PATH_REFRESH_TIME,
+	NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,
+	NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
+	NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
+	NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
+	NL80211_MESHCONF_HWMP_ROOTMODE,
+	NL80211_MESHCONF_ELEMENT_TTL,
+	NL80211_MESHCONF_HWMP_RANN_INTERVAL,
+	NL80211_MESHCONF_GATE_ANNOUNCEMENTS,
+	NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL,
+	NL80211_MESHCONF_FORWARDING,
+	NL80211_MESHCONF_RSSI_THRESHOLD,
+	NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR,
+	NL80211_MESHCONF_HT_OPMODE,
+	NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT,
+	NL80211_MESHCONF_HWMP_ROOT_INTERVAL,
+	NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL,
+
+	/* keep last */
+	__NL80211_MESHCONF_ATTR_AFTER_LAST,
+	NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_mesh_setup_params - mesh setup parameters
+ *
+ * Mesh setup parameters.  These are used to start/join a mesh and cannot be
+ * changed while the mesh is active.
+ *
+ * @__NL80211_MESH_SETUP_INVALID: Internal use
+ *
+ * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a
+ *	vendor specific path selection algorithm or disable it to use the
+ *	default HWMP.
+ *
+ * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a
+ *	vendor specific path metric or disable it to use the default Airtime
+ *	metric.
+ *
+ * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a
+ *	robust security network ie, or a vendor specific information element
+ *	that vendors will use to identify the path selection methods and
+ *	metrics in use.
+ *
+ * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication
+ *	daemon will be authenticating mesh candidates.
+ *
+ * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication
+ *	daemon will be securing peer link frames.  AMPE is a secured version of
+ *	Mesh Peering Management (MPM) and is implemented with the assistance of
+ *	a userspace daemon.  When this flag is set, the kernel will send peer
+ *	management frames to a userspace daemon that will implement AMPE
+ *	functionality (security capabilities selection, key confirmation, and
+ *	key management).  When the flag is unset (default), the kernel can
+ *	autonomously complete (unsecured) mesh peering without the need of a
+ *	userspace daemon.
+ *
+ * @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a
+ *	vendor specific synchronization method or disable it to use the default
+ *	neighbor offset synchronization
+ *
+ * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
+ *
+ * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
+ */
+enum nl80211_mesh_setup_params {
+	__NL80211_MESH_SETUP_INVALID,
+	NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL,
+	NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC,
+	NL80211_MESH_SETUP_IE,
+	NL80211_MESH_SETUP_USERSPACE_AUTH,
+	NL80211_MESH_SETUP_USERSPACE_AMPE,
+	NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC,
+
+	/* keep last */
+	__NL80211_MESH_SETUP_ATTR_AFTER_LAST,
+	NL80211_MESH_SETUP_ATTR_MAX = __NL80211_MESH_SETUP_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_txq_attr - TX queue parameter attributes
+ * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved
+ * @NL80211_TXQ_ATTR_AC: AC identifier (NL80211_AC_*)
+ * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning
+ *	disabled
+ * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form
+ *	2^n-1 in the range 1..32767]
+ * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form
+ *	2^n-1 in the range 1..32767]
+ * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255]
+ * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal
+ * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number
+ */
+enum nl80211_txq_attr {
+	__NL80211_TXQ_ATTR_INVALID,
+	NL80211_TXQ_ATTR_AC,
+	NL80211_TXQ_ATTR_TXOP,
+	NL80211_TXQ_ATTR_CWMIN,
+	NL80211_TXQ_ATTR_CWMAX,
+	NL80211_TXQ_ATTR_AIFS,
+
+	/* keep last */
+	__NL80211_TXQ_ATTR_AFTER_LAST,
+	NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1
+};
+
+enum nl80211_ac {
+	NL80211_AC_VO,
+	NL80211_AC_VI,
+	NL80211_AC_BE,
+	NL80211_AC_BK,
+	NL80211_NUM_ACS
+};
+
+/* backward compat */
+#define NL80211_TXQ_ATTR_QUEUE	NL80211_TXQ_ATTR_AC
+#define NL80211_TXQ_Q_VO	NL80211_AC_VO
+#define NL80211_TXQ_Q_VI	NL80211_AC_VI
+#define NL80211_TXQ_Q_BE	NL80211_AC_BE
+#define NL80211_TXQ_Q_BK	NL80211_AC_BK
+
+enum nl80211_channel_type {
+	NL80211_CHAN_NO_HT,
+	NL80211_CHAN_HT20,
+	NL80211_CHAN_HT40MINUS,
+	NL80211_CHAN_HT40PLUS
+};
+
+/**
+ * enum nl80211_bss - netlink attributes for a BSS
+ *
+ * @__NL80211_BSS_INVALID: invalid
+ * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets)
+ * @NL80211_BSS_FREQUENCY: frequency in MHz (u32)
+ * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64)
+ * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16)
+ * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16)
+ * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the
+ *	raw information elements from the probe response/beacon (bin);
+ *	if the %NL80211_BSS_BEACON_IES attribute is present, the IEs here are
+ *	from a Probe Response frame; otherwise they are from a Beacon frame.
+ *	However, if the driver does not indicate the source of the IEs, these
+ *	IEs may be from either frame subtype.
+ * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon
+ *	in mBm (100 * dBm) (s32)
+ * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon
+ *	in unspecified units, scaled to 0..100 (u8)
+ * @NL80211_BSS_STATUS: status, if this BSS is "used"
+ * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms
+ * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information
+ *	elements from a Beacon frame (bin); not present if no Beacon frame has
+ *	yet been received
+ * @__NL80211_BSS_AFTER_LAST: internal
+ * @NL80211_BSS_MAX: highest BSS attribute
+ */
+enum nl80211_bss {
+	__NL80211_BSS_INVALID,
+	NL80211_BSS_BSSID,
+	NL80211_BSS_FREQUENCY,
+	NL80211_BSS_TSF,
+	NL80211_BSS_BEACON_INTERVAL,
+	NL80211_BSS_CAPABILITY,
+	NL80211_BSS_INFORMATION_ELEMENTS,
+	NL80211_BSS_SIGNAL_MBM,
+	NL80211_BSS_SIGNAL_UNSPEC,
+	NL80211_BSS_STATUS,
+	NL80211_BSS_SEEN_MS_AGO,
+	NL80211_BSS_BEACON_IES,
+
+	/* keep last */
+	__NL80211_BSS_AFTER_LAST,
+	NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_bss_status - BSS "status"
+ * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS.
+ * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS.
+ * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS.
+ *
+ * The BSS status is a BSS attribute in scan dumps, which
+ * indicates the status the interface has wrt. this BSS.
+ */
+enum nl80211_bss_status {
+	NL80211_BSS_STATUS_AUTHENTICATED,
+	NL80211_BSS_STATUS_ASSOCIATED,
+	NL80211_BSS_STATUS_IBSS_JOINED,
+};
+
+/**
+ * enum nl80211_auth_type - AuthenticationType
+ *
+ * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication
+ * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only)
+ * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r)
+ * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP)
+ * @__NL80211_AUTHTYPE_NUM: internal
+ * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm
+ * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by
+ *	trying multiple times); this is invalid in netlink -- leave out
+ *	the attribute for this on CONNECT commands.
+ */
+enum nl80211_auth_type {
+	NL80211_AUTHTYPE_OPEN_SYSTEM,
+	NL80211_AUTHTYPE_SHARED_KEY,
+	NL80211_AUTHTYPE_FT,
+	NL80211_AUTHTYPE_NETWORK_EAP,
+
+	/* keep last */
+	__NL80211_AUTHTYPE_NUM,
+	NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1,
+	NL80211_AUTHTYPE_AUTOMATIC
+};
+
+/**
+ * enum nl80211_key_type - Key Type
+ * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key
+ * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key
+ * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS)
+ * @NUM_NL80211_KEYTYPES: number of defined key types
+ */
+enum nl80211_key_type {
+	NL80211_KEYTYPE_GROUP,
+	NL80211_KEYTYPE_PAIRWISE,
+	NL80211_KEYTYPE_PEERKEY,
+
+	NUM_NL80211_KEYTYPES
+};
+
+/**
+ * enum nl80211_mfp - Management frame protection state
+ * @NL80211_MFP_NO: Management frame protection not used
+ * @NL80211_MFP_REQUIRED: Management frame protection required
+ */
+enum nl80211_mfp {
+	NL80211_MFP_NO,
+	NL80211_MFP_REQUIRED,
+};
+
+enum nl80211_wpa_versions {
+	NL80211_WPA_VERSION_1 = 1 << 0,
+	NL80211_WPA_VERSION_2 = 1 << 1,
+};
+
+/**
+ * enum nl80211_key_default_types - key default types
+ * @__NL80211_KEY_DEFAULT_TYPE_INVALID: invalid
+ * @NL80211_KEY_DEFAULT_TYPE_UNICAST: key should be used as default
+ *	unicast key
+ * @NL80211_KEY_DEFAULT_TYPE_MULTICAST: key should be used as default
+ *	multicast key
+ * @NUM_NL80211_KEY_DEFAULT_TYPES: number of default types
+ */
+enum nl80211_key_default_types {
+	__NL80211_KEY_DEFAULT_TYPE_INVALID,
+	NL80211_KEY_DEFAULT_TYPE_UNICAST,
+	NL80211_KEY_DEFAULT_TYPE_MULTICAST,
+
+	NUM_NL80211_KEY_DEFAULT_TYPES
+};
+
+/**
+ * enum nl80211_key_attributes - key attributes
+ * @__NL80211_KEY_INVALID: invalid
+ * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of
+ *	16 bytes encryption key followed by 8 bytes each for TX and RX MIC
+ *	keys
+ * @NL80211_KEY_IDX: key ID (u8, 0-3)
+ * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
+ *	section 7.3.2.25.1, e.g. 0x000FAC04)
+ * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
+ *	CCMP keys, each six bytes in little endian
+ * @NL80211_KEY_DEFAULT: flag indicating default key
+ * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key
+ * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not
+ *	specified the default depends on whether a MAC address was
+ *	given with the command using the key or not (u32)
+ * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags
+ *	attributes, specifying what a key should be set as default as.
+ *	See &enum nl80211_key_default_types.
+ * @__NL80211_KEY_AFTER_LAST: internal
+ * @NL80211_KEY_MAX: highest key attribute
+ */
+enum nl80211_key_attributes {
+	__NL80211_KEY_INVALID,
+	NL80211_KEY_DATA,
+	NL80211_KEY_IDX,
+	NL80211_KEY_CIPHER,
+	NL80211_KEY_SEQ,
+	NL80211_KEY_DEFAULT,
+	NL80211_KEY_DEFAULT_MGMT,
+	NL80211_KEY_TYPE,
+	NL80211_KEY_DEFAULT_TYPES,
+
+	/* keep last */
+	__NL80211_KEY_AFTER_LAST,
+	NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_tx_rate_attributes - TX rate set attributes
+ * @__NL80211_TXRATE_INVALID: invalid
+ * @NL80211_TXRATE_LEGACY: Legacy (non-MCS) rates allowed for TX rate selection
+ *	in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with
+ *	1 = 500 kbps) but without the IE length restriction (at most
+ *	%NL80211_MAX_SUPP_RATES in a single array).
+ * @NL80211_TXRATE_MCS: HT (MCS) rates allowed for TX rate selection
+ *	in an array of MCS numbers.
+ * @__NL80211_TXRATE_AFTER_LAST: internal
+ * @NL80211_TXRATE_MAX: highest TX rate attribute
+ */
+enum nl80211_tx_rate_attributes {
+	__NL80211_TXRATE_INVALID,
+	NL80211_TXRATE_LEGACY,
+	NL80211_TXRATE_MCS,
+
+	/* keep last */
+	__NL80211_TXRATE_AFTER_LAST,
+	NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_band - Frequency band
+ * @NL80211_BAND_2GHZ: 2.4 GHz ISM band
+ * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
+ * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz)
+ */
+enum nl80211_band {
+	NL80211_BAND_2GHZ,
+	NL80211_BAND_5GHZ,
+	NL80211_BAND_60GHZ,
+};
+
+/**
+ * enum nl80211_ps_state - powersave state
+ * @NL80211_PS_DISABLED: powersave is disabled
+ * @NL80211_PS_ENABLED: powersave is enabled
+ */
+enum nl80211_ps_state {
+	NL80211_PS_DISABLED,
+	NL80211_PS_ENABLED,
+};
+
+/**
+ * enum nl80211_attr_cqm - connection quality monitor attributes
+ * @__NL80211_ATTR_CQM_INVALID: invalid
+ * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies
+ *	the threshold for the RSSI level at which an event will be sent. Zero
+ *	to disable.
+ * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies
+ *	the minimum amount the RSSI level must change after an event before a
+ *	new event may be issued (to reduce effects of RSSI oscillation).
+ * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event
+ * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many
+ *	consecutive packets were not acknowledged by the peer
+ * @NL80211_ATTR_CQM_TXE_RATE: TX error rate in %. Minimum % of TX failures
+ *	during the given %NL80211_ATTR_CQM_TXE_INTVL before an
+ *	%NL80211_CMD_NOTIFY_CQM with reported %NL80211_ATTR_CQM_TXE_RATE and
+ *	%NL80211_ATTR_CQM_TXE_PKTS is generated.
+ * @NL80211_ATTR_CQM_TXE_PKTS: number of attempted packets in a given
+ *	%NL80211_ATTR_CQM_TXE_INTVL before %NL80211_ATTR_CQM_TXE_RATE is
+ *	checked.
+ * @NL80211_ATTR_CQM_TXE_INTVL: interval in seconds. Specifies the periodic
+ *	interval in which %NL80211_ATTR_CQM_TXE_PKTS and
+ *	%NL80211_ATTR_CQM_TXE_RATE must be satisfied before generating an
+ *	%NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting.
+ * @__NL80211_ATTR_CQM_AFTER_LAST: internal
+ * @NL80211_ATTR_CQM_MAX: highest key attribute
+ */
+enum nl80211_attr_cqm {
+	__NL80211_ATTR_CQM_INVALID,
+	NL80211_ATTR_CQM_RSSI_THOLD,
+	NL80211_ATTR_CQM_RSSI_HYST,
+	NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT,
+	NL80211_ATTR_CQM_PKT_LOSS_EVENT,
+	NL80211_ATTR_CQM_TXE_RATE,
+	NL80211_ATTR_CQM_TXE_PKTS,
+	NL80211_ATTR_CQM_TXE_INTVL,
+
+	/* keep last */
+	__NL80211_ATTR_CQM_AFTER_LAST,
+	NL80211_ATTR_CQM_MAX = __NL80211_ATTR_CQM_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_cqm_rssi_threshold_event - RSSI threshold event
+ * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW: The RSSI level is lower than the
+ *      configured threshold
+ * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the
+ *      configured threshold
+ * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: The device experienced beacon loss.
+ *	(Note that deauth/disassoc will still follow if the AP is not
+ *	available. This event might get used as roaming event, etc.)
+ */
+enum nl80211_cqm_rssi_threshold_event {
+	NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
+	NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
+	NL80211_CQM_RSSI_BEACON_LOSS_EVENT,
+};
+
+
+/**
+ * enum nl80211_tx_power_setting - TX power adjustment
+ * @NL80211_TX_POWER_AUTOMATIC: automatically determine transmit power
+ * @NL80211_TX_POWER_LIMITED: limit TX power by the mBm parameter
+ * @NL80211_TX_POWER_FIXED: fix TX power to the mBm parameter
+ */
+enum nl80211_tx_power_setting {
+	NL80211_TX_POWER_AUTOMATIC,
+	NL80211_TX_POWER_LIMITED,
+	NL80211_TX_POWER_FIXED,
+};
+
+/**
+ * enum nl80211_wowlan_packet_pattern_attr - WoWLAN packet pattern attribute
+ * @__NL80211_WOWLAN_PKTPAT_INVALID: invalid number for nested attribute
+ * @NL80211_WOWLAN_PKTPAT_PATTERN: the pattern, values where the mask has
+ *	a zero bit are ignored
+ * @NL80211_WOWLAN_PKTPAT_MASK: pattern mask, must be long enough to have
+ *	a bit for each byte in the pattern. The lowest-order bit corresponds
+ *	to the first byte of the pattern, but the bytes of the pattern are
+ *	in a little-endian-like format, i.e. the 9th byte of the pattern
+ *	corresponds to the lowest-order bit in the second byte of the mask.
+ *	For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where
+ *	xx indicates "don't care") would be represented by a pattern of
+ *	twelve zero bytes, and a mask of "0xed,0x07".
+ *	Note that the pattern matching is done as though frames were not
+ *	802.11 frames but 802.3 frames, i.e. the frame is fully unpacked
+ *	first (including SNAP header unpacking) and then matched.
+ * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes
+ * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number
+ */
+enum nl80211_wowlan_packet_pattern_attr {
+	__NL80211_WOWLAN_PKTPAT_INVALID,
+	NL80211_WOWLAN_PKTPAT_MASK,
+	NL80211_WOWLAN_PKTPAT_PATTERN,
+
+	NUM_NL80211_WOWLAN_PKTPAT,
+	MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1,
+};
+
+/**
+ * struct nl80211_wowlan_pattern_support - pattern support information
+ * @max_patterns: maximum number of patterns supported
+ * @min_pattern_len: minimum length of each pattern
+ * @max_pattern_len: maximum length of each pattern
+ *
+ * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when
+ * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the
+ * capability information given by the kernel to userspace.
+ */
+struct nl80211_wowlan_pattern_support {
+	__u32 max_patterns;
+	__u32 min_pattern_len;
+	__u32 max_pattern_len;
+} __attribute__((packed));
+
+/**
+ * enum nl80211_wowlan_triggers - WoWLAN trigger definitions
+ * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes
+ * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put
+ *	the chip into a special state -- works best with chips that have
+ *	support for low-power operation already (flag)
+ * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect
+ *	is detected is implementation-specific (flag)
+ * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed
+ *	by 16 repetitions of MAC addr, anywhere in payload) (flag)
+ * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns
+ *	which are passed in an array of nested attributes, each nested attribute
+ *	defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern.
+ *	Each pattern defines a wakeup packet. The matching is done on the MSDU,
+ *	i.e. as though the packet was an 802.3 packet, so the pattern matching
+ *	is done after the packet is converted to the MSDU.
+ *
+ *	In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
+ *	carrying a &struct nl80211_wowlan_pattern_support.
+ * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be
+ *	used when setting, used only to indicate that GTK rekeying is supported
+ *	by the device (flag)
+ * @NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE: wake up on GTK rekey failure (if
+ *	done by the device) (flag)
+ * @NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST: wake up on EAP Identity Request
+ *	packet (flag)
+ * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag)
+ * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released
+ *	(on devices that have rfkill in the device) (flag)
+ * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
+ * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
+ */
+enum nl80211_wowlan_triggers {
+	__NL80211_WOWLAN_TRIG_INVALID,
+	NL80211_WOWLAN_TRIG_ANY,
+	NL80211_WOWLAN_TRIG_DISCONNECT,
+	NL80211_WOWLAN_TRIG_MAGIC_PKT,
+	NL80211_WOWLAN_TRIG_PKT_PATTERN,
+	NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED,
+	NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE,
+	NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST,
+	NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE,
+	NL80211_WOWLAN_TRIG_RFKILL_RELEASE,
+
+	/* keep last */
+	NUM_NL80211_WOWLAN_TRIG,
+	MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1
+};
+
+/**
+ * enum nl80211_iface_limit_attrs - limit attributes
+ * @NL80211_IFACE_LIMIT_UNSPEC: (reserved)
+ * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that
+ *	can be chosen from this set of interface types (u32)
+ * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a
+ *	flag attribute for each interface type in this set
+ * @NUM_NL80211_IFACE_LIMIT: number of attributes
+ * @MAX_NL80211_IFACE_LIMIT: highest attribute number
+ */
+enum nl80211_iface_limit_attrs {
+	NL80211_IFACE_LIMIT_UNSPEC,
+	NL80211_IFACE_LIMIT_MAX,
+	NL80211_IFACE_LIMIT_TYPES,
+
+	/* keep last */
+	NUM_NL80211_IFACE_LIMIT,
+	MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 1
+};
+
+/**
+ * enum nl80211_if_combination_attrs -- interface combination attributes
+ *
+ * @NL80211_IFACE_COMB_UNSPEC: (reserved)
+ * @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits
+ *	for given interface types, see &enum nl80211_iface_limit_attrs.
+ * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of
+ *	interfaces that can be created in this group. This number doesn't
+ *	apply to interfaces purely managed in software, which are listed
+ *	in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE.
+ * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that
+ *	beacon intervals within this group must be all the same even for
+ *	infrastructure and AP/GO combinations, i.e. the GO(s) must adopt
+ *	the infrastructure network's beacon interval.
+ * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many
+ *	different channels may be used within this group.
+ * @NUM_NL80211_IFACE_COMB: number of attributes
+ * @MAX_NL80211_IFACE_COMB: highest attribute number
+ *
+ * Examples:
+ *	limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2
+ *	=> allows an AP and a STA that must match BIs
+ *
+ *	numbers = [ #{AP, P2P-GO} <= 8 ], channels = 1, max = 8
+ *	=> allows 8 of AP/GO
+ *
+ *	numbers = [ #{STA} <= 2 ], channels = 2, max = 2
+ *	=> allows two STAs on different channels
+ *
+ *	numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4
+ *	=> allows a STA plus three P2P interfaces
+ *
+ * The list of these four possiblities could completely be contained
+ * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate
+ * that any of these groups must match.
+ *
+ * "Combinations" of just a single interface will not be listed here,
+ * a single interface of any valid interface type is assumed to always
+ * be possible by itself. This means that implicitly, for each valid
+ * interface type, the following group always exists:
+ *	numbers = [ #{<type>} <= 1 ], channels = 1, max = 1
+ */
+enum nl80211_if_combination_attrs {
+	NL80211_IFACE_COMB_UNSPEC,
+	NL80211_IFACE_COMB_LIMITS,
+	NL80211_IFACE_COMB_MAXNUM,
+	NL80211_IFACE_COMB_STA_AP_BI_MATCH,
+	NL80211_IFACE_COMB_NUM_CHANNELS,
+
+	/* keep last */
+	NUM_NL80211_IFACE_COMB,
+	MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1
+};
+
+
+/**
+ * enum nl80211_plink_state - state of a mesh peer link finite state machine
+ *
+ * @NL80211_PLINK_LISTEN: initial state, considered the implicit
+ *	state of non existant mesh peer links
+ * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to
+ *	this mesh peer
+ * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received
+ *	from this mesh peer
+ * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been
+ *	received from this mesh peer
+ * @NL80211_PLINK_ESTAB: mesh peer link is established
+ * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled
+ * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh
+ *	plink are discarded
+ * @NUM_NL80211_PLINK_STATES: number of peer link states
+ * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states
+ */
+enum nl80211_plink_state {
+	NL80211_PLINK_LISTEN,
+	NL80211_PLINK_OPN_SNT,
+	NL80211_PLINK_OPN_RCVD,
+	NL80211_PLINK_CNF_RCVD,
+	NL80211_PLINK_ESTAB,
+	NL80211_PLINK_HOLDING,
+	NL80211_PLINK_BLOCKED,
+
+	/* keep last */
+	NUM_NL80211_PLINK_STATES,
+	MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1
+};
+
+#define NL80211_KCK_LEN			16
+#define NL80211_KEK_LEN			16
+#define NL80211_REPLAY_CTR_LEN		8
+
+/**
+ * enum nl80211_rekey_data - attributes for GTK rekey offload
+ * @__NL80211_REKEY_DATA_INVALID: invalid number for nested attributes
+ * @NL80211_REKEY_DATA_KEK: key encryption key (binary)
+ * @NL80211_REKEY_DATA_KCK: key confirmation key (binary)
+ * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary)
+ * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal)
+ * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal)
+ */
+enum nl80211_rekey_data {
+	__NL80211_REKEY_DATA_INVALID,
+	NL80211_REKEY_DATA_KEK,
+	NL80211_REKEY_DATA_KCK,
+	NL80211_REKEY_DATA_REPLAY_CTR,
+
+	/* keep last */
+	NUM_NL80211_REKEY_DATA,
+	MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1
+};
+
+/**
+ * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID
+ * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in
+ *	Beacon frames)
+ * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element
+ *	in Beacon frames
+ * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID
+ *	element in Beacon frames but zero out each byte in the SSID
+ */
+enum nl80211_hidden_ssid {
+	NL80211_HIDDEN_SSID_NOT_IN_USE,
+	NL80211_HIDDEN_SSID_ZERO_LEN,
+	NL80211_HIDDEN_SSID_ZERO_CONTENTS
+};
+
+/**
+ * enum nl80211_sta_wme_attr - station WME attributes
+ * @__NL80211_STA_WME_INVALID: invalid number for nested attribute
+ * @NL80211_STA_WME_UAPSD_QUEUES: bitmap of uapsd queues. the format
+ *	is the same as the AC bitmap in the QoS info field.
+ * @NL80211_STA_WME_MAX_SP: max service period. the format is the same
+ *	as the MAX_SP field in the QoS info field (but already shifted down).
+ * @__NL80211_STA_WME_AFTER_LAST: internal
+ * @NL80211_STA_WME_MAX: highest station WME attribute
+ */
+enum nl80211_sta_wme_attr {
+	__NL80211_STA_WME_INVALID,
+	NL80211_STA_WME_UAPSD_QUEUES,
+	NL80211_STA_WME_MAX_SP,
+
+	/* keep last */
+	__NL80211_STA_WME_AFTER_LAST,
+	NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_pmksa_candidate_attr - attributes for PMKSA caching candidates
+ * @__NL80211_PMKSA_CANDIDATE_INVALID: invalid number for nested attributes
+ * @NL80211_PMKSA_CANDIDATE_INDEX: candidate index (u32; the smaller, the higher
+ *	priority)
+ * @NL80211_PMKSA_CANDIDATE_BSSID: candidate BSSID (6 octets)
+ * @NL80211_PMKSA_CANDIDATE_PREAUTH: RSN pre-authentication supported (flag)
+ * @NUM_NL80211_PMKSA_CANDIDATE: number of PMKSA caching candidate attributes
+ *	(internal)
+ * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute
+ *	(internal)
+ */
+enum nl80211_pmksa_candidate_attr {
+	__NL80211_PMKSA_CANDIDATE_INVALID,
+	NL80211_PMKSA_CANDIDATE_INDEX,
+	NL80211_PMKSA_CANDIDATE_BSSID,
+	NL80211_PMKSA_CANDIDATE_PREAUTH,
+
+	/* keep last */
+	NUM_NL80211_PMKSA_CANDIDATE,
+	MAX_NL80211_PMKSA_CANDIDATE = NUM_NL80211_PMKSA_CANDIDATE - 1
+};
+
+/**
+ * enum nl80211_tdls_operation - values for %NL80211_ATTR_TDLS_OPERATION
+ * @NL80211_TDLS_DISCOVERY_REQ: Send a TDLS discovery request
+ * @NL80211_TDLS_SETUP: Setup TDLS link
+ * @NL80211_TDLS_TEARDOWN: Teardown a TDLS link which is already established
+ * @NL80211_TDLS_ENABLE_LINK: Enable TDLS link
+ * @NL80211_TDLS_DISABLE_LINK: Disable TDLS link
+ */
+enum nl80211_tdls_operation {
+	NL80211_TDLS_DISCOVERY_REQ,
+	NL80211_TDLS_SETUP,
+	NL80211_TDLS_TEARDOWN,
+	NL80211_TDLS_ENABLE_LINK,
+	NL80211_TDLS_DISABLE_LINK,
+};
+
+/*
+ * enum nl80211_ap_sme_features - device-integrated AP features
+ * Reserved for future use, no bits are defined in
+ * NL80211_ATTR_DEVICE_AP_SME yet.
+enum nl80211_ap_sme_features {
+};
+ */
+
+/**
+ * enum nl80211_feature_flags - device/driver features
+ * @NL80211_FEATURE_SK_TX_STATUS: This driver supports reflecting back
+ *	TX status to the socket error queue when requested with the
+ *	socket option.
+ * @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates.
+ * @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up
+ *	the connected inactive stations in AP mode.
+ * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested
+ *	to work properly to suppport receiving regulatory hints from
+ *	cellular base stations.
+ * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: If this is set, an active
+ *	P2P Device (%NL80211_IFTYPE_P2P_DEVICE) requires its own channel
+ *	in the interface combinations, even when it's only used for scan
+ *	and remain-on-channel. This could be due to, for example, the
+ *	remain-on-channel implementation requiring a channel context.
+ */
+enum nl80211_feature_flags {
+	NL80211_FEATURE_SK_TX_STATUS			= 1 << 0,
+	NL80211_FEATURE_HT_IBSS				= 1 << 1,
+	NL80211_FEATURE_INACTIVITY_TIMER		= 1 << 2,
+	NL80211_FEATURE_CELL_BASE_REG_HINTS		= 1 << 3,
+	NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL	= 1 << 4,
+};
+
+/**
+ * enum nl80211_probe_resp_offload_support_attr - optional supported
+ *	protocols for probe-response offloading by the driver/FW.
+ *	To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute.
+ *	Each enum value represents a bit in the bitmap of supported
+ *	protocols. Typically a subset of probe-requests belonging to a
+ *	supported protocol will be excluded from offload and uploaded
+ *	to the host.
+ *
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS: Support for WPS ver. 1
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2: Support for WPS ver. 2
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P: Support for P2P
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U: Support for 802.11u
+ */
+enum nl80211_probe_resp_offload_support_attr {
+	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS =	1<<0,
+	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 =	1<<1,
+	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P =	1<<2,
+	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U =	1<<3,
+};
+
+/**
+ * enum nl80211_connect_failed_reason - connection request failed reasons
+ * @NL80211_CONN_FAIL_MAX_CLIENTS: Maximum number of clients that can be
+ *	handled by the AP is reached.
+ * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Client's MAC is in the AP's blocklist.
+ */
+enum nl80211_connect_failed_reason {
+	NL80211_CONN_FAIL_MAX_CLIENTS,
+	NL80211_CONN_FAIL_BLOCKED_CLIENT,
+};
+
+#endif /* __LINUX_NL80211_H */
diff --git a/include/uapi/linux/nubus.h b/include/uapi/linux/nubus.h
new file mode 100644
index 00000000000..77513d2b563
--- /dev/null
+++ b/include/uapi/linux/nubus.h
@@ -0,0 +1,244 @@
+/*
+  nubus.h: various definitions and prototypes for NuBus drivers to use.
+
+  Originally written by Alan Cox.
+
+  Hacked to death by C. Scott Ananian and David Huggins-Daines.
+  
+  Some of the constants in here are from the corresponding
+  NetBSD/OpenBSD header file, by Allen Briggs.  We figured out the
+  rest of them on our own. */
+
+#ifndef _UAPILINUX_NUBUS_H
+#define _UAPILINUX_NUBUS_H
+
+#include <linux/types.h>
+
+enum nubus_category {
+	NUBUS_CAT_BOARD          = 0x0001,
+	NUBUS_CAT_DISPLAY        = 0x0003,
+	NUBUS_CAT_NETWORK        = 0x0004,
+	NUBUS_CAT_COMMUNICATIONS = 0x0006,
+	NUBUS_CAT_FONT           = 0x0009,
+	NUBUS_CAT_CPU            = 0x000A,
+	/* For lack of a better name */
+	NUBUS_CAT_DUODOCK        = 0x0020
+};
+
+enum nubus_type_network {
+	NUBUS_TYPE_ETHERNET      = 0x0001,
+	NUBUS_TYPE_RS232         = 0x0002
+};
+
+enum nubus_type_display {
+	NUBUS_TYPE_VIDEO         = 0x0001
+};
+
+enum nubus_type_cpu {
+	NUBUS_TYPE_68020         = 0x0003,
+	NUBUS_TYPE_68030         = 0x0004,
+	NUBUS_TYPE_68040         = 0x0005
+};
+
+/* Known <Cat,Type,SW,HW> tuples: (according to TattleTech and Slots)
+ *  68030 motherboards: <10,4,0,24>
+ *  68040 motherboards: <10,5,0,24>
+ *  DuoDock Plus: <32,1,1,2>
+ *
+ *  Toby Frame Buffer card: <3,1,1,1>
+ *  RBV built-in video (IIci): <3,1,1,24>
+ *  Valkyrie built-in video (Q630): <3,1,1,46>
+ *  Macintosh Display Card: <3,1,1,25>
+ *  Sonora built-in video (P460): <3,1,1,34>
+ *  Jet framebuffer (DuoDock Plus): <3,1,1,41>
+ *
+ *  SONIC comm-slot/on-board and DuoDock Ethernet: <4,1,1,272>
+ *  SONIC LC-PDS Ethernet (Dayna, but like Apple 16-bit, sort of): <4,1,1,271>
+ *  Apple SONIC LC-PDS Ethernet ("Apple Ethernet LC Twisted-Pair Card"): <4,1,0,281>
+ *  Sonic Systems Ethernet A-Series Card: <4,1,268,256>
+ *  Asante MacCon NuBus-A: <4,1,260,256> (alpha-1.0,1.1 revision)
+ *   ROM on the above card: <2,1,0,0>
+ *  Cabletron ethernet card: <4,1,1,265>
+ *  Farallon ethernet card: <4,1,268,256> (identical to Sonic Systems card)
+ *  Kinetics EtherPort IIN: <4,1,259,262>
+ *  API Engineering EtherRun_LCa PDS enet card: <4,1,282,256>
+ *
+ *  Add your devices to the list!  You can obtain the "Slots" utility
+ *  from Apple's FTP site at:
+ *  ftp://dev.apple.com/devworld/Tool_Chest/Devices_-_Hardware/NuBus_Slot_Manager/
+ *
+ *  Alternately, TattleTech can be found at any Info-Mac mirror site.  
+ *  or from its distribution site: ftp://ftp.decismkr.com/dms
+ */
+
+/* DrSW: Uniquely identifies the software interface to a board.  This
+   is usually the one you want to look at when writing a driver.  It's
+   not as useful as you think, though, because as we should know by
+   now (duh), "Apple Compatible" can mean a lot of things... */
+
+/* Add known DrSW values here */
+enum nubus_drsw {
+	/* NUBUS_CAT_DISPLAY */
+	NUBUS_DRSW_APPLE        = 0x0001,
+	NUBUS_DRSW_APPLE_HIRES  = 0x0013, /* MacII HiRes card driver */
+	
+	/* NUBUS_CAT_NETWORK */
+	NUBUS_DRSW_3COM         = 0x0000,
+	NUBUS_DRSW_CABLETRON    = 0x0001,
+	NUBUS_DRSW_SONIC_LC     = 0x0001,
+	NUBUS_DRSW_KINETICS     = 0x0103,
+	NUBUS_DRSW_ASANTE       = 0x0104,
+	NUBUS_DRSW_TECHWORKS    = 0x0109,
+	NUBUS_DRSW_DAYNA        = 0x010b,
+	NUBUS_DRSW_FARALLON     = 0x010c,
+	NUBUS_DRSW_APPLE_SN     = 0x010f,
+	NUBUS_DRSW_DAYNA2       = 0x0115,
+	NUBUS_DRSW_FOCUS        = 0x011a,
+	NUBUS_DRSW_ASANTE_CS    = 0x011d, /* use asante SMC9194 driver */
+	NUBUS_DRSW_DAYNA_LC     = 0x011e,
+
+	/* NUBUS_CAT_CPU */
+	NUBUS_DRSW_NONE         = 0x0000,
+};
+
+/* DrHW: Uniquely identifies the hardware interface to a board (or at
+   least, it should...  some video cards are known to incorrectly
+   identify themselves as Toby cards) */
+
+/* Add known DrHW values here */
+enum nubus_drhw {
+	/* NUBUS_CAT_DISPLAY */
+	NUBUS_DRHW_APPLE_TFB      = 0x0001, /* Toby frame buffer card */
+	NUBUS_DRHW_APPLE_WVC      = 0x0006, /* Apple Workstation Video Card */
+	NUBUS_DRHW_SIGMA_CLRMAX   = 0x0007, /* Sigma Design ColorMax */
+	NUBUS_DRHW_APPLE_SE30     = 0x0009, /* Apple SE/30 video */
+	NUBUS_DRHW_APPLE_HRVC     = 0x0013, /* Mac II High-Res Video Card */
+	NUBUS_DRHW_APPLE_PVC      = 0x0017, /* Mac II Portrait Video Card */
+	NUBUS_DRHW_APPLE_RBV1     = 0x0018, /* IIci RBV video */
+	NUBUS_DRHW_APPLE_MDC      = 0x0019, /* Macintosh Display Card */
+	NUBUS_DRHW_APPLE_SONORA   = 0x0022, /* Sonora built-in video */
+	NUBUS_DRHW_APPLE_24AC     = 0x002b, /* Mac 24AC Video Card */
+	NUBUS_DRHW_APPLE_VALKYRIE = 0x002e,
+	NUBUS_DRHW_APPLE_JET      = 0x0029, /* Jet framebuffer (DuoDock) */
+	NUBUS_DRHW_SMAC_GFX       = 0x0105, /* SuperMac GFX */
+	NUBUS_DRHW_RASTER_CB264   = 0x013B, /* RasterOps ColorBoard 264 */
+	NUBUS_DRHW_MICRON_XCEED   = 0x0146, /* Micron Exceed color */
+	NUBUS_DRHW_RDIUS_GSC      = 0x0153, /* Radius GS/C */
+	NUBUS_DRHW_SMAC_SPEC8     = 0x017B, /* SuperMac Spectrum/8 */
+	NUBUS_DRHW_SMAC_SPEC24    = 0x017C, /* SuperMac Spectrum/24 */
+	NUBUS_DRHW_RASTER_CB364   = 0x026F, /* RasterOps ColorBoard 364 */
+	NUBUS_DRHW_RDIUS_DCGX     = 0x027C, /* Radius DirectColor/GX */
+	NUBUS_DRHW_RDIUS_PC8      = 0x0291, /* Radius PrecisionColor 8 */
+	NUBUS_DRHW_LAPIS_PCS8     = 0x0292, /* Lapis ProColorServer 8 */
+	NUBUS_DRHW_RASTER_24XLI   = 0x02A0, /* RasterOps 8/24 XLi */
+	NUBUS_DRHW_RASTER_PBPGT   = 0x02A5, /* RasterOps PaintBoard Prism GT */
+	NUBUS_DRHW_EMACH_FSX      = 0x02AE, /* E-Machines Futura SX */
+	NUBUS_DRHW_RASTER_24XLTV  = 0x02B7, /* RasterOps 24XLTV */
+	NUBUS_DRHW_SMAC_THUND24   = 0x02CB, /* SuperMac Thunder/24 */
+	NUBUS_DRHW_SMAC_THUNDLGHT = 0x03D9, /* SuperMac ThunderLight */
+	NUBUS_DRHW_RDIUS_PC24XP   = 0x0406, /* Radius PrecisionColor 24Xp */
+	NUBUS_DRHW_RDIUS_PC24X    = 0x040A, /* Radius PrecisionColor 24X */
+	NUBUS_DRHW_RDIUS_PC8XJ    = 0x040B, /* Radius PrecisionColor 8XJ */
+	
+	/* NUBUS_CAT_NETWORK */
+	NUBUS_DRHW_INTERLAN       = 0x0100,
+	NUBUS_DRHW_SMC9194        = 0x0101,
+	NUBUS_DRHW_KINETICS       = 0x0106,
+	NUBUS_DRHW_CABLETRON      = 0x0109,
+	NUBUS_DRHW_ASANTE_LC      = 0x010f,
+	NUBUS_DRHW_SONIC          = 0x0110,
+	NUBUS_DRHW_TECHWORKS      = 0x0112,
+	NUBUS_DRHW_APPLE_SONIC_NB = 0x0118,
+	NUBUS_DRHW_APPLE_SONIC_LC = 0x0119,
+	NUBUS_DRHW_FOCUS          = 0x011c,
+	NUBUS_DRHW_SONNET         = 0x011d,
+};
+
+/* Resource IDs: These are the identifiers for the various weird and
+   wonderful tidbits of information that may or may not reside in the
+   NuBus ROM directory. */
+enum nubus_res_id {
+	NUBUS_RESID_TYPE         = 0x0001,
+	NUBUS_RESID_NAME         = 0x0002,
+	NUBUS_RESID_ICON         = 0x0003,
+	NUBUS_RESID_DRVRDIR      = 0x0004,
+	NUBUS_RESID_LOADREC      = 0x0005,
+	NUBUS_RESID_BOOTREC      = 0x0006,
+	NUBUS_RESID_FLAGS        = 0x0007,
+	NUBUS_RESID_HWDEVID      = 0x0008,
+	NUBUS_RESID_MINOR_BASEOS = 0x000a,
+	NUBUS_RESID_MINOR_LENGTH = 0x000b,
+	NUBUS_RESID_MAJOR_BASEOS = 0x000c,
+	NUBUS_RESID_MAJOR_LENGTH = 0x000d,
+	NUBUS_RESID_CICN         = 0x000f,
+	NUBUS_RESID_ICL8         = 0x0010,
+	NUBUS_RESID_ICL4         = 0x0011,
+};
+
+/* Category-specific resources. */
+enum nubus_board_res_id {
+	NUBUS_RESID_BOARDID      = 0x0020,
+	NUBUS_RESID_PRAMINITDATA = 0x0021,
+	NUBUS_RESID_PRIMARYINIT  = 0x0022,
+	NUBUS_RESID_TIMEOUTCONST = 0x0023,
+	NUBUS_RESID_VENDORINFO   = 0x0024,
+	NUBUS_RESID_BOARDFLAGS   = 0x0025,
+	NUBUS_RESID_SECONDINIT   = 0x0026,
+
+	/* Not sure why Apple put these next two in here */
+	NUBUS_RESID_VIDNAMES     = 0x0041,
+	NUBUS_RESID_VIDMODES     = 0x007e
+};
+
+/* Fields within the vendor info directory */
+enum nubus_vendor_res_id {
+	NUBUS_RESID_VEND_ID     = 0x0001,
+	NUBUS_RESID_VEND_SERIAL = 0x0002,
+	NUBUS_RESID_VEND_REV    = 0x0003,
+	NUBUS_RESID_VEND_PART   = 0x0004,
+	NUBUS_RESID_VEND_DATE   = 0x0005
+};
+
+enum nubus_net_res_id {
+	NUBUS_RESID_MAC_ADDRESS  = 0x0080
+};
+
+enum nubus_cpu_res_id {
+	NUBUS_RESID_MEMINFO      = 0x0081,
+	NUBUS_RESID_ROMINFO      = 0x0082
+};
+
+enum nubus_display_res_id {
+	NUBUS_RESID_GAMMADIR    = 0x0040,
+	NUBUS_RESID_FIRSTMODE   = 0x0080,
+	NUBUS_RESID_SECONDMODE  = 0x0081,
+	NUBUS_RESID_THIRDMODE   = 0x0082,
+	NUBUS_RESID_FOURTHMODE  = 0x0083,
+	NUBUS_RESID_FIFTHMODE   = 0x0084,
+	NUBUS_RESID_SIXTHMODE   = 0x0085
+};
+
+struct nubus_dir
+{
+	unsigned char *base;
+	unsigned char *ptr;
+	int done;
+	int mask;
+};
+
+struct nubus_dirent
+{
+	unsigned char *base;
+	unsigned char type;
+	__u32 data;	/* Actually 24bits used */
+	int mask;
+};
+
+
+/* We'd like to get rid of this eventually.  Only daynaport.c uses it now. */
+static inline void *nubus_slot_addr(int slot)
+{
+	return (void *)(0xF0000000|(slot<<24));
+}
+
+#endif /* _UAPILINUX_NUBUS_H */
diff --git a/include/uapi/linux/nvram.h b/include/uapi/linux/nvram.h
new file mode 100644
index 00000000000..0986c433738
--- /dev/null
+++ b/include/uapi/linux/nvram.h
@@ -0,0 +1,16 @@
+#ifndef _UAPI_LINUX_NVRAM_H
+#define _UAPI_LINUX_NVRAM_H
+
+#include <linux/ioctl.h>
+
+/* /dev/nvram ioctls */
+#define NVRAM_INIT	_IO('p', 0x40) /* initialize NVRAM and set checksum */
+#define NVRAM_SETCKS	_IO('p', 0x41) /* recalculate checksum */
+
+/* for all current systems, this is where NVRAM starts */
+#define NVRAM_FIRST_BYTE    14
+/* all these functions expect an NVRAM offset, not an absolute */
+#define NVRAM_OFFSET(x)   ((x)-NVRAM_FIRST_BYTE)
+
+
+#endif /* _UAPI_LINUX_NVRAM_H */
diff --git a/include/uapi/linux/omap3isp.h b/include/uapi/linux/omap3isp.h
new file mode 100644
index 00000000000..c090cf9249b
--- /dev/null
+++ b/include/uapi/linux/omap3isp.h
@@ -0,0 +1,646 @@
+/*
+ * omap3isp.h
+ *
+ * TI OMAP3 ISP - User-space API
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef OMAP3_ISP_USER_H
+#define OMAP3_ISP_USER_H
+
+#include <linux/types.h>
+#include <linux/videodev2.h>
+
+/*
+ * Private IOCTLs
+ *
+ * VIDIOC_OMAP3ISP_CCDC_CFG: Set CCDC configuration
+ * VIDIOC_OMAP3ISP_PRV_CFG: Set preview engine configuration
+ * VIDIOC_OMAP3ISP_AEWB_CFG: Set AEWB module configuration
+ * VIDIOC_OMAP3ISP_HIST_CFG: Set histogram module configuration
+ * VIDIOC_OMAP3ISP_AF_CFG: Set auto-focus module configuration
+ * VIDIOC_OMAP3ISP_STAT_REQ: Read statistics (AEWB/AF/histogram) data
+ * VIDIOC_OMAP3ISP_STAT_EN: Enable/disable a statistics module
+ */
+
+#define VIDIOC_OMAP3ISP_CCDC_CFG \
+	_IOWR('V', BASE_VIDIOC_PRIVATE + 1, struct omap3isp_ccdc_update_config)
+#define VIDIOC_OMAP3ISP_PRV_CFG \
+	_IOWR('V', BASE_VIDIOC_PRIVATE + 2, struct omap3isp_prev_update_config)
+#define VIDIOC_OMAP3ISP_AEWB_CFG \
+	_IOWR('V', BASE_VIDIOC_PRIVATE + 3, struct omap3isp_h3a_aewb_config)
+#define VIDIOC_OMAP3ISP_HIST_CFG \
+	_IOWR('V', BASE_VIDIOC_PRIVATE + 4, struct omap3isp_hist_config)
+#define VIDIOC_OMAP3ISP_AF_CFG \
+	_IOWR('V', BASE_VIDIOC_PRIVATE + 5, struct omap3isp_h3a_af_config)
+#define VIDIOC_OMAP3ISP_STAT_REQ \
+	_IOWR('V', BASE_VIDIOC_PRIVATE + 6, struct omap3isp_stat_data)
+#define VIDIOC_OMAP3ISP_STAT_EN \
+	_IOWR('V', BASE_VIDIOC_PRIVATE + 7, unsigned long)
+
+/*
+ * Events
+ *
+ * V4L2_EVENT_OMAP3ISP_AEWB: AEWB statistics data ready
+ * V4L2_EVENT_OMAP3ISP_AF: AF statistics data ready
+ * V4L2_EVENT_OMAP3ISP_HIST: Histogram statistics data ready
+ */
+
+#define V4L2_EVENT_OMAP3ISP_CLASS	(V4L2_EVENT_PRIVATE_START | 0x100)
+#define V4L2_EVENT_OMAP3ISP_AEWB	(V4L2_EVENT_OMAP3ISP_CLASS | 0x1)
+#define V4L2_EVENT_OMAP3ISP_AF		(V4L2_EVENT_OMAP3ISP_CLASS | 0x2)
+#define V4L2_EVENT_OMAP3ISP_HIST	(V4L2_EVENT_OMAP3ISP_CLASS | 0x3)
+
+struct omap3isp_stat_event_status {
+	__u32 frame_number;
+	__u16 config_counter;
+	__u8 buf_err;
+};
+
+/* AE/AWB related structures and flags*/
+
+/* H3A Range Constants */
+#define OMAP3ISP_AEWB_MAX_SATURATION_LIM	1023
+#define OMAP3ISP_AEWB_MIN_WIN_H			2
+#define OMAP3ISP_AEWB_MAX_WIN_H			256
+#define OMAP3ISP_AEWB_MIN_WIN_W			6
+#define OMAP3ISP_AEWB_MAX_WIN_W			256
+#define OMAP3ISP_AEWB_MIN_WINVC			1
+#define OMAP3ISP_AEWB_MIN_WINHC			1
+#define OMAP3ISP_AEWB_MAX_WINVC			128
+#define OMAP3ISP_AEWB_MAX_WINHC			36
+#define OMAP3ISP_AEWB_MAX_WINSTART		4095
+#define OMAP3ISP_AEWB_MIN_SUB_INC		2
+#define OMAP3ISP_AEWB_MAX_SUB_INC		32
+#define OMAP3ISP_AEWB_MAX_BUF_SIZE		83600
+
+#define OMAP3ISP_AF_IIRSH_MIN			0
+#define OMAP3ISP_AF_IIRSH_MAX			4095
+#define OMAP3ISP_AF_PAXEL_HORIZONTAL_COUNT_MIN	1
+#define OMAP3ISP_AF_PAXEL_HORIZONTAL_COUNT_MAX	36
+#define OMAP3ISP_AF_PAXEL_VERTICAL_COUNT_MIN	1
+#define OMAP3ISP_AF_PAXEL_VERTICAL_COUNT_MAX	128
+#define OMAP3ISP_AF_PAXEL_INCREMENT_MIN		2
+#define OMAP3ISP_AF_PAXEL_INCREMENT_MAX		32
+#define OMAP3ISP_AF_PAXEL_HEIGHT_MIN		2
+#define OMAP3ISP_AF_PAXEL_HEIGHT_MAX		256
+#define OMAP3ISP_AF_PAXEL_WIDTH_MIN		16
+#define OMAP3ISP_AF_PAXEL_WIDTH_MAX		256
+#define OMAP3ISP_AF_PAXEL_HZSTART_MIN		1
+#define OMAP3ISP_AF_PAXEL_HZSTART_MAX		4095
+#define OMAP3ISP_AF_PAXEL_VTSTART_MIN		0
+#define OMAP3ISP_AF_PAXEL_VTSTART_MAX		4095
+#define OMAP3ISP_AF_THRESHOLD_MAX		255
+#define OMAP3ISP_AF_COEF_MAX			4095
+#define OMAP3ISP_AF_PAXEL_SIZE			48
+#define OMAP3ISP_AF_MAX_BUF_SIZE		221184
+
+/**
+ * struct omap3isp_h3a_aewb_config - AE AWB configuration reset values
+ * saturation_limit: Saturation limit.
+ * @win_height: Window Height. Range 2 - 256, even values only.
+ * @win_width: Window Width. Range 6 - 256, even values only.
+ * @ver_win_count: Vertical Window Count. Range 1 - 128.
+ * @hor_win_count: Horizontal Window Count. Range 1 - 36.
+ * @ver_win_start: Vertical Window Start. Range 0 - 4095.
+ * @hor_win_start: Horizontal Window Start. Range 0 - 4095.
+ * @blk_ver_win_start: Black Vertical Windows Start. Range 0 - 4095.
+ * @blk_win_height: Black Window Height. Range 2 - 256, even values only.
+ * @subsample_ver_inc: Subsample Vertical points increment Range 2 - 32, even
+ *                     values only.
+ * @subsample_hor_inc: Subsample Horizontal points increment Range 2 - 32, even
+ *                     values only.
+ * @alaw_enable: AEW ALAW EN flag.
+ */
+struct omap3isp_h3a_aewb_config {
+	/*
+	 * Common fields.
+	 * They should be the first ones and must be in the same order as in
+	 * ispstat_generic_config struct.
+	 */
+	__u32 buf_size;
+	__u16 config_counter;
+
+	/* Private fields */
+	__u16 saturation_limit;
+	__u16 win_height;
+	__u16 win_width;
+	__u16 ver_win_count;
+	__u16 hor_win_count;
+	__u16 ver_win_start;
+	__u16 hor_win_start;
+	__u16 blk_ver_win_start;
+	__u16 blk_win_height;
+	__u16 subsample_ver_inc;
+	__u16 subsample_hor_inc;
+	__u8 alaw_enable;
+};
+
+/**
+ * struct omap3isp_stat_data - Statistic data sent to or received from user
+ * @ts: Timestamp of returned framestats.
+ * @buf: Pointer to pass to user.
+ * @frame_number: Frame number of requested stats.
+ * @cur_frame: Current frame number being processed.
+ * @config_counter: Number of the configuration associated with the data.
+ */
+struct omap3isp_stat_data {
+	struct timeval ts;
+	void __user *buf;
+	__u32 buf_size;
+	__u16 frame_number;
+	__u16 cur_frame;
+	__u16 config_counter;
+};
+
+
+/* Histogram related structs */
+
+/* Flags for number of bins */
+#define OMAP3ISP_HIST_BINS_32		0
+#define OMAP3ISP_HIST_BINS_64		1
+#define OMAP3ISP_HIST_BINS_128		2
+#define OMAP3ISP_HIST_BINS_256		3
+
+/* Number of bins * 4 colors * 4-bytes word */
+#define OMAP3ISP_HIST_MEM_SIZE_BINS(n)	((1 << ((n)+5))*4*4)
+
+#define OMAP3ISP_HIST_MEM_SIZE		1024
+#define OMAP3ISP_HIST_MIN_REGIONS	1
+#define OMAP3ISP_HIST_MAX_REGIONS	4
+#define OMAP3ISP_HIST_MAX_WB_GAIN	255
+#define OMAP3ISP_HIST_MIN_WB_GAIN	0
+#define OMAP3ISP_HIST_MAX_BIT_WIDTH	14
+#define OMAP3ISP_HIST_MIN_BIT_WIDTH	8
+#define OMAP3ISP_HIST_MAX_WG		4
+#define OMAP3ISP_HIST_MAX_BUF_SIZE	4096
+
+/* Source */
+#define OMAP3ISP_HIST_SOURCE_CCDC	0
+#define OMAP3ISP_HIST_SOURCE_MEM	1
+
+/* CFA pattern */
+#define OMAP3ISP_HIST_CFA_BAYER		0
+#define OMAP3ISP_HIST_CFA_FOVEONX3	1
+
+struct omap3isp_hist_region {
+	__u16 h_start;
+	__u16 h_end;
+	__u16 v_start;
+	__u16 v_end;
+};
+
+struct omap3isp_hist_config {
+	/*
+	 * Common fields.
+	 * They should be the first ones and must be in the same order as in
+	 * ispstat_generic_config struct.
+	 */
+	__u32 buf_size;
+	__u16 config_counter;
+
+	__u8 num_acc_frames;	/* Num of image frames to be processed and
+				   accumulated for each histogram frame */
+	__u16 hist_bins;	/* number of bins: 32, 64, 128, or 256 */
+	__u8 cfa;		/* BAYER or FOVEON X3 */
+	__u8 wg[OMAP3ISP_HIST_MAX_WG];	/* White Balance Gain */
+	__u8 num_regions;	/* number of regions to be configured */
+	struct omap3isp_hist_region region[OMAP3ISP_HIST_MAX_REGIONS];
+};
+
+/* Auto Focus related structs */
+
+#define OMAP3ISP_AF_NUM_COEF		11
+
+enum omap3isp_h3a_af_fvmode {
+	OMAP3ISP_AF_MODE_SUMMED = 0,
+	OMAP3ISP_AF_MODE_PEAK = 1
+};
+
+/* Red, Green, and blue pixel location in the AF windows */
+enum omap3isp_h3a_af_rgbpos {
+	OMAP3ISP_AF_GR_GB_BAYER = 0,	/* GR and GB as Bayer pattern */
+	OMAP3ISP_AF_RG_GB_BAYER = 1,	/* RG and GB as Bayer pattern */
+	OMAP3ISP_AF_GR_BG_BAYER = 2,	/* GR and BG as Bayer pattern */
+	OMAP3ISP_AF_RG_BG_BAYER = 3,	/* RG and BG as Bayer pattern */
+	OMAP3ISP_AF_GG_RB_CUSTOM = 4,	/* GG and RB as custom pattern */
+	OMAP3ISP_AF_RB_GG_CUSTOM = 5	/* RB and GG as custom pattern */
+};
+
+/* Contains the information regarding the Horizontal Median Filter */
+struct omap3isp_h3a_af_hmf {
+	__u8 enable;	/* Status of Horizontal Median Filter */
+	__u8 threshold;	/* Threshold Value for Horizontal Median Filter */
+};
+
+/* Contains the information regarding the IIR Filters */
+struct omap3isp_h3a_af_iir {
+	__u16 h_start;			/* IIR horizontal start */
+	__u16 coeff_set0[OMAP3ISP_AF_NUM_COEF];	/* Filter coefficient, set 0 */
+	__u16 coeff_set1[OMAP3ISP_AF_NUM_COEF];	/* Filter coefficient, set 1 */
+};
+
+/* Contains the information regarding the Paxels Structure in AF Engine */
+struct omap3isp_h3a_af_paxel {
+	__u16 h_start;	/* Horizontal Start Position */
+	__u16 v_start;	/* Vertical Start Position */
+	__u8 width;	/* Width of the Paxel */
+	__u8 height;	/* Height of the Paxel */
+	__u8 h_cnt;	/* Horizontal Count */
+	__u8 v_cnt;	/* vertical Count */
+	__u8 line_inc;	/* Line Increment */
+};
+
+/* Contains the parameters required for hardware set up of AF Engine */
+struct omap3isp_h3a_af_config {
+	/*
+	 * Common fields.
+	 * They should be the first ones and must be in the same order as in
+	 * ispstat_generic_config struct.
+	 */
+	__u32 buf_size;
+	__u16 config_counter;
+
+	struct omap3isp_h3a_af_hmf hmf;		/* HMF configurations */
+	struct omap3isp_h3a_af_iir iir;		/* IIR filter configurations */
+	struct omap3isp_h3a_af_paxel paxel;	/* Paxel parameters */
+	enum omap3isp_h3a_af_rgbpos rgb_pos;	/* RGB Positions */
+	enum omap3isp_h3a_af_fvmode fvmode;	/* Accumulator mode */
+	__u8 alaw_enable;			/* AF ALAW status */
+};
+
+/* ISP CCDC structs */
+
+/* Abstraction layer CCDC configurations */
+#define OMAP3ISP_CCDC_ALAW		(1 << 0)
+#define OMAP3ISP_CCDC_LPF		(1 << 1)
+#define OMAP3ISP_CCDC_BLCLAMP		(1 << 2)
+#define OMAP3ISP_CCDC_BCOMP		(1 << 3)
+#define OMAP3ISP_CCDC_FPC		(1 << 4)
+#define OMAP3ISP_CCDC_CULL		(1 << 5)
+#define OMAP3ISP_CCDC_CONFIG_LSC	(1 << 7)
+#define OMAP3ISP_CCDC_TBL_LSC		(1 << 8)
+
+#define OMAP3ISP_RGB_MAX		3
+
+/* Enumeration constants for Alaw input width */
+enum omap3isp_alaw_ipwidth {
+	OMAP3ISP_ALAW_BIT12_3 = 0x3,
+	OMAP3ISP_ALAW_BIT11_2 = 0x4,
+	OMAP3ISP_ALAW_BIT10_1 = 0x5,
+	OMAP3ISP_ALAW_BIT9_0 = 0x6
+};
+
+/**
+ * struct omap3isp_ccdc_lsc_config - LSC configuration
+ * @offset: Table Offset of the gain table.
+ * @gain_mode_n: Vertical dimension of a paxel in LSC configuration.
+ * @gain_mode_m: Horizontal dimension of a paxel in LSC configuration.
+ * @gain_format: Gain table format.
+ * @fmtsph: Start pixel horizontal from start of the HS sync pulse.
+ * @fmtlnh: Number of pixels in horizontal direction to use for the data
+ *          reformatter.
+ * @fmtslv: Start line from start of VS sync pulse for the data reformatter.
+ * @fmtlnv: Number of lines in vertical direction for the data reformatter.
+ * @initial_x: X position, in pixels, of the first active pixel in reference
+ *             to the first active paxel. Must be an even number.
+ * @initial_y: Y position, in pixels, of the first active pixel in reference
+ *             to the first active paxel. Must be an even number.
+ * @size: Size of LSC gain table. Filled when loaded from userspace.
+ */
+struct omap3isp_ccdc_lsc_config {
+	__u16 offset;
+	__u8 gain_mode_n;
+	__u8 gain_mode_m;
+	__u8 gain_format;
+	__u16 fmtsph;
+	__u16 fmtlnh;
+	__u16 fmtslv;
+	__u16 fmtlnv;
+	__u8 initial_x;
+	__u8 initial_y;
+	__u32 size;
+};
+
+/**
+ * struct omap3isp_ccdc_bclamp - Optical & Digital black clamp subtract
+ * @obgain: Optical black average gain.
+ * @obstpixel: Start Pixel w.r.t. HS pulse in Optical black sample.
+ * @oblines: Optical Black Sample lines.
+ * @oblen: Optical Black Sample Length.
+ * @dcsubval: Digital Black Clamp subtract value.
+ */
+struct omap3isp_ccdc_bclamp {
+	__u8 obgain;
+	__u8 obstpixel;
+	__u8 oblines;
+	__u8 oblen;
+	__u16 dcsubval;
+};
+
+/**
+ * struct omap3isp_ccdc_fpc - Faulty Pixels Correction
+ * @fpnum: Number of faulty pixels to be corrected in the frame.
+ * @fpcaddr: Memory address of the FPC Table
+ */
+struct omap3isp_ccdc_fpc {
+	__u16 fpnum;
+	__u32 fpcaddr;
+};
+
+/**
+ * struct omap3isp_ccdc_blcomp - Black Level Compensation parameters
+ * @b_mg: B/Mg pixels. 2's complement. -128 to +127.
+ * @gb_g: Gb/G pixels. 2's complement. -128 to +127.
+ * @gr_cy: Gr/Cy pixels. 2's complement. -128 to +127.
+ * @r_ye: R/Ye pixels. 2's complement. -128 to +127.
+ */
+struct omap3isp_ccdc_blcomp {
+	__u8 b_mg;
+	__u8 gb_g;
+	__u8 gr_cy;
+	__u8 r_ye;
+};
+
+/**
+ * omap3isp_ccdc_culling - Culling parameters
+ * @v_pattern: Vertical culling pattern.
+ * @h_odd: Horizontal Culling pattern for odd lines.
+ * @h_even: Horizontal Culling pattern for even lines.
+ */
+struct omap3isp_ccdc_culling {
+	__u8 v_pattern;
+	__u16 h_odd;
+	__u16 h_even;
+};
+
+/**
+ * omap3isp_ccdc_update_config - CCDC configuration
+ * @update: Specifies which CCDC registers should be updated.
+ * @flag: Specifies which CCDC functions should be enabled.
+ * @alawip: Enable/Disable A-Law compression.
+ * @bclamp: Black clamp control register.
+ * @blcomp: Black level compensation value for RGrGbB Pixels. 2's complement.
+ * @fpc: Number of faulty pixels corrected in the frame, address of FPC table.
+ * @cull: Cull control register.
+ * @lsc: Pointer to LSC gain table.
+ */
+struct omap3isp_ccdc_update_config {
+	__u16 update;
+	__u16 flag;
+	enum omap3isp_alaw_ipwidth alawip;
+	struct omap3isp_ccdc_bclamp __user *bclamp;
+	struct omap3isp_ccdc_blcomp __user *blcomp;
+	struct omap3isp_ccdc_fpc __user *fpc;
+	struct omap3isp_ccdc_lsc_config __user *lsc_cfg;
+	struct omap3isp_ccdc_culling __user *cull;
+	__u8 __user *lsc;
+};
+
+/* Preview configurations */
+#define OMAP3ISP_PREV_LUMAENH		(1 << 0)
+#define OMAP3ISP_PREV_INVALAW		(1 << 1)
+#define OMAP3ISP_PREV_HRZ_MED		(1 << 2)
+#define OMAP3ISP_PREV_CFA		(1 << 3)
+#define OMAP3ISP_PREV_CHROMA_SUPP	(1 << 4)
+#define OMAP3ISP_PREV_WB		(1 << 5)
+#define OMAP3ISP_PREV_BLKADJ		(1 << 6)
+#define OMAP3ISP_PREV_RGB2RGB		(1 << 7)
+#define OMAP3ISP_PREV_COLOR_CONV	(1 << 8)
+#define OMAP3ISP_PREV_YC_LIMIT		(1 << 9)
+#define OMAP3ISP_PREV_DEFECT_COR	(1 << 10)
+/* Bit 11 was OMAP3ISP_PREV_GAMMABYPASS, now merged with OMAP3ISP_PREV_GAMMA */
+#define OMAP3ISP_PREV_DRK_FRM_CAPTURE	(1 << 12)
+#define OMAP3ISP_PREV_DRK_FRM_SUBTRACT	(1 << 13)
+#define OMAP3ISP_PREV_LENS_SHADING	(1 << 14)
+#define OMAP3ISP_PREV_NF		(1 << 15)
+#define OMAP3ISP_PREV_GAMMA		(1 << 16)
+
+#define OMAP3ISP_PREV_NF_TBL_SIZE	64
+#define OMAP3ISP_PREV_CFA_TBL_SIZE	576
+#define OMAP3ISP_PREV_CFA_BLK_SIZE	(OMAP3ISP_PREV_CFA_TBL_SIZE / 4)
+#define OMAP3ISP_PREV_GAMMA_TBL_SIZE	1024
+#define OMAP3ISP_PREV_YENH_TBL_SIZE	128
+
+#define OMAP3ISP_PREV_DETECT_CORRECT_CHANNELS	4
+
+/**
+ * struct omap3isp_prev_hmed - Horizontal Median Filter
+ * @odddist: Distance between consecutive pixels of same color in the odd line.
+ * @evendist: Distance between consecutive pixels of same color in the even
+ *            line.
+ * @thres: Horizontal median filter threshold.
+ */
+struct omap3isp_prev_hmed {
+	__u8 odddist;
+	__u8 evendist;
+	__u8 thres;
+};
+
+/*
+ * Enumeration for CFA Formats supported by preview
+ */
+enum omap3isp_cfa_fmt {
+	OMAP3ISP_CFAFMT_BAYER,
+	OMAP3ISP_CFAFMT_SONYVGA,
+	OMAP3ISP_CFAFMT_RGBFOVEON,
+	OMAP3ISP_CFAFMT_DNSPL,
+	OMAP3ISP_CFAFMT_HONEYCOMB,
+	OMAP3ISP_CFAFMT_RRGGBBFOVEON
+};
+
+/**
+ * struct omap3isp_prev_cfa - CFA Interpolation
+ * @format: CFA Format Enum value supported by preview.
+ * @gradthrs_vert: CFA Gradient Threshold - Vertical.
+ * @gradthrs_horz: CFA Gradient Threshold - Horizontal.
+ * @table: Pointer to the CFA table.
+ */
+struct omap3isp_prev_cfa {
+	enum omap3isp_cfa_fmt format;
+	__u8 gradthrs_vert;
+	__u8 gradthrs_horz;
+	__u32 table[4][OMAP3ISP_PREV_CFA_BLK_SIZE];
+};
+
+/**
+ * struct omap3isp_prev_csup - Chrominance Suppression
+ * @gain: Gain.
+ * @thres: Threshold.
+ * @hypf_en: Flag to enable/disable the High Pass Filter.
+ */
+struct omap3isp_prev_csup {
+	__u8 gain;
+	__u8 thres;
+	__u8 hypf_en;
+};
+
+/**
+ * struct omap3isp_prev_wbal - White Balance
+ * @dgain: Digital gain (U10Q8).
+ * @coef3: White balance gain - COEF 3 (U8Q5).
+ * @coef2: White balance gain - COEF 2 (U8Q5).
+ * @coef1: White balance gain - COEF 1 (U8Q5).
+ * @coef0: White balance gain - COEF 0 (U8Q5).
+ */
+struct omap3isp_prev_wbal {
+	__u16 dgain;
+	__u8 coef3;
+	__u8 coef2;
+	__u8 coef1;
+	__u8 coef0;
+};
+
+/**
+ * struct omap3isp_prev_blkadj - Black Level Adjustment
+ * @red: Black level offset adjustment for Red in 2's complement format
+ * @green: Black level offset adjustment for Green in 2's complement format
+ * @blue: Black level offset adjustment for Blue in 2's complement format
+ */
+struct omap3isp_prev_blkadj {
+	/*Black level offset adjustment for Red in 2's complement format */
+	__u8 red;
+	/*Black level offset adjustment for Green in 2's complement format */
+	__u8 green;
+	/* Black level offset adjustment for Blue in 2's complement format */
+	__u8 blue;
+};
+
+/**
+ * struct omap3isp_prev_rgbtorgb - RGB to RGB Blending
+ * @matrix: Blending values(S12Q8 format)
+ *              [RR] [GR] [BR]
+ *              [RG] [GG] [BG]
+ *              [RB] [GB] [BB]
+ * @offset: Blending offset value for R,G,B in 2's complement integer format.
+ */
+struct omap3isp_prev_rgbtorgb {
+	__u16 matrix[OMAP3ISP_RGB_MAX][OMAP3ISP_RGB_MAX];
+	__u16 offset[OMAP3ISP_RGB_MAX];
+};
+
+/**
+ * struct omap3isp_prev_csc - Color Space Conversion from RGB-YCbYCr
+ * @matrix: Color space conversion coefficients(S10Q8)
+ *              [CSCRY]  [CSCGY]  [CSCBY]
+ *              [CSCRCB] [CSCGCB] [CSCBCB]
+ *              [CSCRCR] [CSCGCR] [CSCBCR]
+ * @offset: CSC offset values for Y offset, CB offset and CR offset respectively
+ */
+struct omap3isp_prev_csc {
+	__u16 matrix[OMAP3ISP_RGB_MAX][OMAP3ISP_RGB_MAX];
+	__s16 offset[OMAP3ISP_RGB_MAX];
+};
+
+/**
+ * struct omap3isp_prev_yclimit - Y, C Value Limit
+ * @minC: Minimum C value
+ * @maxC: Maximum C value
+ * @minY: Minimum Y value
+ * @maxY: Maximum Y value
+ */
+struct omap3isp_prev_yclimit {
+	__u8 minC;
+	__u8 maxC;
+	__u8 minY;
+	__u8 maxY;
+};
+
+/**
+ * struct omap3isp_prev_dcor - Defect correction
+ * @couplet_mode_en: Flag to enable or disable the couplet dc Correction in NF
+ * @detect_correct: Thresholds for correction bit 0:10 detect 16:25 correct
+ */
+struct omap3isp_prev_dcor {
+	__u8 couplet_mode_en;
+	__u32 detect_correct[OMAP3ISP_PREV_DETECT_CORRECT_CHANNELS];
+};
+
+/**
+ * struct omap3isp_prev_nf - Noise Filter
+ * @spread: Spread value to be used in Noise Filter
+ * @table: Pointer to the Noise Filter table
+ */
+struct omap3isp_prev_nf {
+	__u8 spread;
+	__u32 table[OMAP3ISP_PREV_NF_TBL_SIZE];
+};
+
+/**
+ * struct omap3isp_prev_gtables - Gamma correction tables
+ * @red: Array for red gamma table.
+ * @green: Array for green gamma table.
+ * @blue: Array for blue gamma table.
+ */
+struct omap3isp_prev_gtables {
+	__u32 red[OMAP3ISP_PREV_GAMMA_TBL_SIZE];
+	__u32 green[OMAP3ISP_PREV_GAMMA_TBL_SIZE];
+	__u32 blue[OMAP3ISP_PREV_GAMMA_TBL_SIZE];
+};
+
+/**
+ * struct omap3isp_prev_luma - Luma enhancement
+ * @table: Array for luma enhancement table.
+ */
+struct omap3isp_prev_luma {
+	__u32 table[OMAP3ISP_PREV_YENH_TBL_SIZE];
+};
+
+/**
+ * struct omap3isp_prev_update_config - Preview engine configuration (user)
+ * @update: Specifies which ISP Preview registers should be updated.
+ * @flag: Specifies which ISP Preview functions should be enabled.
+ * @shading_shift: 3bit value of shift used in shading compensation.
+ * @luma: Pointer to luma enhancement structure.
+ * @hmed: Pointer to structure containing the odd and even distance.
+ *        between the pixels in the image along with the filter threshold.
+ * @cfa: Pointer to structure containing the CFA interpolation table, CFA.
+ *       format in the image, vertical and horizontal gradient threshold.
+ * @csup: Pointer to Structure for Chrominance Suppression coefficients.
+ * @wbal: Pointer to structure for White Balance.
+ * @blkadj: Pointer to structure for Black Adjustment.
+ * @rgb2rgb: Pointer to structure for RGB to RGB Blending.
+ * @csc: Pointer to structure for Color Space Conversion from RGB-YCbYCr.
+ * @yclimit: Pointer to structure for Y, C Value Limit.
+ * @dcor: Pointer to structure for defect correction.
+ * @nf: Pointer to structure for Noise Filter
+ * @gamma: Pointer to gamma structure.
+ */
+struct omap3isp_prev_update_config {
+	__u32 update;
+	__u32 flag;
+	__u32 shading_shift;
+	struct omap3isp_prev_luma __user *luma;
+	struct omap3isp_prev_hmed __user *hmed;
+	struct omap3isp_prev_cfa __user *cfa;
+	struct omap3isp_prev_csup __user *csup;
+	struct omap3isp_prev_wbal __user *wbal;
+	struct omap3isp_prev_blkadj __user *blkadj;
+	struct omap3isp_prev_rgbtorgb __user *rgb2rgb;
+	struct omap3isp_prev_csc __user *csc;
+	struct omap3isp_prev_yclimit __user *yclimit;
+	struct omap3isp_prev_dcor __user *dcor;
+	struct omap3isp_prev_nf __user *nf;
+	struct omap3isp_prev_gtables __user *gamma;
+};
+
+#endif	/* OMAP3_ISP_USER_H */
diff --git a/include/uapi/linux/omapfb.h b/include/uapi/linux/omapfb.h
new file mode 100644
index 00000000000..7c97bc00ac6
--- /dev/null
+++ b/include/uapi/linux/omapfb.h
@@ -0,0 +1,222 @@
+/*
+ * File: include/linux/omapfb.h
+ *
+ * Framebuffer driver for TI OMAP boards
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef _UAPI__LINUX_OMAPFB_H__
+#define _UAPI__LINUX_OMAPFB_H__
+
+#include <linux/fb.h>
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+/* IOCTL commands. */
+
+#define OMAP_IOW(num, dtype)	_IOW('O', num, dtype)
+#define OMAP_IOR(num, dtype)	_IOR('O', num, dtype)
+#define OMAP_IOWR(num, dtype)	_IOWR('O', num, dtype)
+#define OMAP_IO(num)		_IO('O', num)
+
+#define OMAPFB_MIRROR		OMAP_IOW(31, int)
+#define OMAPFB_SYNC_GFX		OMAP_IO(37)
+#define OMAPFB_VSYNC		OMAP_IO(38)
+#define OMAPFB_SET_UPDATE_MODE	OMAP_IOW(40, int)
+#define OMAPFB_GET_CAPS		OMAP_IOR(42, struct omapfb_caps)
+#define OMAPFB_GET_UPDATE_MODE	OMAP_IOW(43, int)
+#define OMAPFB_LCD_TEST		OMAP_IOW(45, int)
+#define OMAPFB_CTRL_TEST	OMAP_IOW(46, int)
+#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old)
+#define OMAPFB_SET_COLOR_KEY	OMAP_IOW(50, struct omapfb_color_key)
+#define OMAPFB_GET_COLOR_KEY	OMAP_IOW(51, struct omapfb_color_key)
+#define OMAPFB_SETUP_PLANE	OMAP_IOW(52, struct omapfb_plane_info)
+#define OMAPFB_QUERY_PLANE	OMAP_IOW(53, struct omapfb_plane_info)
+#define OMAPFB_UPDATE_WINDOW	OMAP_IOW(54, struct omapfb_update_window)
+#define OMAPFB_SETUP_MEM	OMAP_IOW(55, struct omapfb_mem_info)
+#define OMAPFB_QUERY_MEM	OMAP_IOW(56, struct omapfb_mem_info)
+#define OMAPFB_WAITFORVSYNC	OMAP_IO(57)
+#define OMAPFB_MEMORY_READ	OMAP_IOR(58, struct omapfb_memory_read)
+#define OMAPFB_GET_OVERLAY_COLORMODE OMAP_IOR(59, struct omapfb_ovl_colormode)
+#define OMAPFB_WAITFORGO	OMAP_IO(60)
+#define OMAPFB_GET_VRAM_INFO	OMAP_IOR(61, struct omapfb_vram_info)
+#define OMAPFB_SET_TEARSYNC	OMAP_IOW(62, struct omapfb_tearsync_info)
+#define OMAPFB_GET_DISPLAY_INFO	OMAP_IOR(63, struct omapfb_display_info)
+
+#define OMAPFB_CAPS_GENERIC_MASK	0x00000fff
+#define OMAPFB_CAPS_LCDC_MASK		0x00fff000
+#define OMAPFB_CAPS_PANEL_MASK		0xff000000
+
+#define OMAPFB_CAPS_MANUAL_UPDATE	0x00001000
+#define OMAPFB_CAPS_TEARSYNC		0x00002000
+#define OMAPFB_CAPS_PLANE_RELOCATE_MEM	0x00004000
+#define OMAPFB_CAPS_PLANE_SCALE		0x00008000
+#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE	0x00010000
+#define OMAPFB_CAPS_WINDOW_SCALE	0x00020000
+#define OMAPFB_CAPS_WINDOW_OVERLAY	0x00040000
+#define OMAPFB_CAPS_WINDOW_ROTATE	0x00080000
+#define OMAPFB_CAPS_SET_BACKLIGHT	0x01000000
+
+/* Values from DSP must map to lower 16-bits */
+#define OMAPFB_FORMAT_MASK		0x00ff
+#define OMAPFB_FORMAT_FLAG_DOUBLE	0x0100
+#define OMAPFB_FORMAT_FLAG_TEARSYNC	0x0200
+#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC	0x0400
+#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY	0x0800
+#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY	0x1000
+
+#define OMAPFB_MEMTYPE_SDRAM		0
+#define OMAPFB_MEMTYPE_SRAM		1
+#define OMAPFB_MEMTYPE_MAX		1
+
+#define OMAPFB_MEM_IDX_ENABLED	0x80
+#define OMAPFB_MEM_IDX_MASK	0x7f
+
+enum omapfb_color_format {
+	OMAPFB_COLOR_RGB565 = 0,
+	OMAPFB_COLOR_YUV422,
+	OMAPFB_COLOR_YUV420,
+	OMAPFB_COLOR_CLUT_8BPP,
+	OMAPFB_COLOR_CLUT_4BPP,
+	OMAPFB_COLOR_CLUT_2BPP,
+	OMAPFB_COLOR_CLUT_1BPP,
+	OMAPFB_COLOR_RGB444,
+	OMAPFB_COLOR_YUY422,
+
+	OMAPFB_COLOR_ARGB16,
+	OMAPFB_COLOR_RGB24U,	/* RGB24, 32-bit container */
+	OMAPFB_COLOR_RGB24P,	/* RGB24, 24-bit container */
+	OMAPFB_COLOR_ARGB32,
+	OMAPFB_COLOR_RGBA32,
+	OMAPFB_COLOR_RGBX32,
+};
+
+struct omapfb_update_window {
+	__u32 x, y;
+	__u32 width, height;
+	__u32 format;
+	__u32 out_x, out_y;
+	__u32 out_width, out_height;
+	__u32 reserved[8];
+};
+
+struct omapfb_update_window_old {
+	__u32 x, y;
+	__u32 width, height;
+	__u32 format;
+};
+
+enum omapfb_plane {
+	OMAPFB_PLANE_GFX = 0,
+	OMAPFB_PLANE_VID1,
+	OMAPFB_PLANE_VID2,
+};
+
+enum omapfb_channel_out {
+	OMAPFB_CHANNEL_OUT_LCD = 0,
+	OMAPFB_CHANNEL_OUT_DIGIT,
+};
+
+struct omapfb_plane_info {
+	__u32 pos_x;
+	__u32 pos_y;
+	__u8  enabled;
+	__u8  channel_out;
+	__u8  mirror;
+	__u8  mem_idx;
+	__u32 out_width;
+	__u32 out_height;
+	__u32 reserved2[12];
+};
+
+struct omapfb_mem_info {
+	__u32 size;
+	__u8  type;
+	__u8  reserved[3];
+};
+
+struct omapfb_caps {
+	__u32 ctrl;
+	__u32 plane_color;
+	__u32 wnd_color;
+};
+
+enum omapfb_color_key_type {
+	OMAPFB_COLOR_KEY_DISABLED = 0,
+	OMAPFB_COLOR_KEY_GFX_DST,
+	OMAPFB_COLOR_KEY_VID_SRC,
+};
+
+struct omapfb_color_key {
+	__u8  channel_out;
+	__u32 background;
+	__u32 trans_key;
+	__u8  key_type;
+};
+
+enum omapfb_update_mode {
+	OMAPFB_UPDATE_DISABLED = 0,
+	OMAPFB_AUTO_UPDATE,
+	OMAPFB_MANUAL_UPDATE
+};
+
+struct omapfb_memory_read {
+	__u16 x;
+	__u16 y;
+	__u16 w;
+	__u16 h;
+	size_t buffer_size;
+	void __user *buffer;
+};
+
+struct omapfb_ovl_colormode {
+	__u8 overlay_idx;
+	__u8 mode_idx;
+	__u32 bits_per_pixel;
+	__u32 nonstd;
+	struct fb_bitfield red;
+	struct fb_bitfield green;
+	struct fb_bitfield blue;
+	struct fb_bitfield transp;
+};
+
+struct omapfb_vram_info {
+	__u32 total;
+	__u32 free;
+	__u32 largest_free_block;
+	__u32 reserved[5];
+};
+
+struct omapfb_tearsync_info {
+	__u8 enabled;
+	__u8 reserved1[3];
+	__u16 line;
+	__u16 reserved2;
+};
+
+struct omapfb_display_info {
+	__u16 xres;
+	__u16 yres;
+	__u32 width;	/* phys width of the display in micrometers */
+	__u32 height;	/* phys height of the display in micrometers */
+	__u32 reserved[5];
+};
+
+
+#endif /* _UAPI__LINUX_OMAPFB_H__ */
diff --git a/include/uapi/linux/oom.h b/include/uapi/linux/oom.h
new file mode 100644
index 00000000000..a49c4afc706
--- /dev/null
+++ b/include/uapi/linux/oom.h
@@ -0,0 +1,11 @@
+#ifndef _UAPI__INCLUDE_LINUX_OOM_H
+#define _UAPI__INCLUDE_LINUX_OOM_H
+
+/*
+ * /proc/<pid>/oom_score_adj set to OOM_SCORE_ADJ_MIN disables oom killing for
+ * pid.
+ */
+#define OOM_SCORE_ADJ_MIN	(-1000)
+#define OOM_SCORE_ADJ_MAX	1000
+
+#endif /* _UAPI__INCLUDE_LINUX_OOM_H */
diff --git a/include/uapi/linux/packet_diag.h b/include/uapi/linux/packet_diag.h
new file mode 100644
index 00000000000..93f5fa94a43
--- /dev/null
+++ b/include/uapi/linux/packet_diag.h
@@ -0,0 +1,72 @@
+#ifndef __PACKET_DIAG_H__
+#define __PACKET_DIAG_H__
+
+#include <linux/types.h>
+
+struct packet_diag_req {
+	__u8	sdiag_family;
+	__u8	sdiag_protocol;
+	__u16	pad;
+	__u32	pdiag_ino;
+	__u32	pdiag_show;
+	__u32	pdiag_cookie[2];
+};
+
+#define PACKET_SHOW_INFO	0x00000001 /* Basic packet_sk information */
+#define PACKET_SHOW_MCLIST	0x00000002 /* A set of packet_diag_mclist-s */
+#define PACKET_SHOW_RING_CFG	0x00000004 /* Rings configuration parameters */
+#define PACKET_SHOW_FANOUT	0x00000008
+
+struct packet_diag_msg {
+	__u8	pdiag_family;
+	__u8	pdiag_type;
+	__u16	pdiag_num;
+
+	__u32	pdiag_ino;
+	__u32	pdiag_cookie[2];
+};
+
+enum {
+	PACKET_DIAG_INFO,
+	PACKET_DIAG_MCLIST,
+	PACKET_DIAG_RX_RING,
+	PACKET_DIAG_TX_RING,
+	PACKET_DIAG_FANOUT,
+
+	PACKET_DIAG_MAX,
+};
+
+struct packet_diag_info {
+	__u32	pdi_index;
+	__u32	pdi_version;
+	__u32	pdi_reserve;
+	__u32	pdi_copy_thresh;
+	__u32	pdi_tstamp;
+	__u32	pdi_flags;
+
+#define PDI_RUNNING	0x1
+#define PDI_AUXDATA	0x2
+#define PDI_ORIGDEV	0x4
+#define PDI_VNETHDR	0x8
+#define PDI_LOSS	0x10
+};
+
+struct packet_diag_mclist {
+	__u32	pdmc_index;
+	__u32	pdmc_count;
+	__u16	pdmc_type;
+	__u16	pdmc_alen;
+	__u8	pdmc_addr[MAX_ADDR_LEN];
+};
+
+struct packet_diag_ring {
+	__u32	pdr_block_size;
+	__u32	pdr_block_nr;
+	__u32	pdr_frame_size;
+	__u32	pdr_frame_nr;
+	__u32	pdr_retire_tmo;
+	__u32	pdr_sizeof_priv;
+	__u32	pdr_features;
+};
+
+#endif
diff --git a/include/uapi/linux/param.h b/include/uapi/linux/param.h
new file mode 100644
index 00000000000..092e92f67b5
--- /dev/null
+++ b/include/uapi/linux/param.h
@@ -0,0 +1,6 @@
+#ifndef _LINUX_PARAM_H
+#define _LINUX_PARAM_H
+
+#include <asm/param.h>
+
+#endif
diff --git a/include/uapi/linux/parport.h b/include/uapi/linux/parport.h
new file mode 100644
index 00000000000..f41388f88dc
--- /dev/null
+++ b/include/uapi/linux/parport.h
@@ -0,0 +1,95 @@
+/*
+ * Any part of this program may be used in documents licensed under
+ * the GNU Free Documentation License, Version 1.1 or any later version
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _UAPI_PARPORT_H_
+#define _UAPI_PARPORT_H_
+
+/* Start off with user-visible constants */
+
+/* Maximum of 16 ports per machine */
+#define PARPORT_MAX  16
+
+/* Magic numbers */
+#define PARPORT_IRQ_NONE  -1
+#define PARPORT_DMA_NONE  -1
+#define PARPORT_IRQ_AUTO  -2
+#define PARPORT_DMA_AUTO  -2
+#define PARPORT_DMA_NOFIFO -3
+#define PARPORT_DISABLE   -2
+#define PARPORT_IRQ_PROBEONLY -3
+#define PARPORT_IOHI_AUTO -1
+
+#define PARPORT_CONTROL_STROBE    0x1
+#define PARPORT_CONTROL_AUTOFD    0x2
+#define PARPORT_CONTROL_INIT      0x4
+#define PARPORT_CONTROL_SELECT    0x8
+
+#define PARPORT_STATUS_ERROR      0x8
+#define PARPORT_STATUS_SELECT     0x10
+#define PARPORT_STATUS_PAPEROUT   0x20
+#define PARPORT_STATUS_ACK        0x40
+#define PARPORT_STATUS_BUSY       0x80
+
+/* Type classes for Plug-and-Play probe.  */
+typedef enum {
+	PARPORT_CLASS_LEGACY = 0,       /* Non-IEEE1284 device */
+	PARPORT_CLASS_PRINTER,
+	PARPORT_CLASS_MODEM,
+	PARPORT_CLASS_NET,
+	PARPORT_CLASS_HDC,              /* Hard disk controller */
+	PARPORT_CLASS_PCMCIA,
+	PARPORT_CLASS_MEDIA,            /* Multimedia device */
+	PARPORT_CLASS_FDC,              /* Floppy disk controller */
+	PARPORT_CLASS_PORTS,
+	PARPORT_CLASS_SCANNER,
+	PARPORT_CLASS_DIGCAM,
+	PARPORT_CLASS_OTHER,            /* Anything else */
+	PARPORT_CLASS_UNSPEC,           /* No CLS field in ID */
+	PARPORT_CLASS_SCSIADAPTER
+} parport_device_class;
+
+/* The "modes" entry in parport is a bit field representing the
+   capabilities of the hardware. */
+#define PARPORT_MODE_PCSPP	(1<<0) /* IBM PC registers available. */
+#define PARPORT_MODE_TRISTATE	(1<<1) /* Can tristate. */
+#define PARPORT_MODE_EPP	(1<<2) /* Hardware EPP. */
+#define PARPORT_MODE_ECP	(1<<3) /* Hardware ECP. */
+#define PARPORT_MODE_COMPAT	(1<<4) /* Hardware 'printer protocol'. */
+#define PARPORT_MODE_DMA	(1<<5) /* Hardware can DMA. */
+#define PARPORT_MODE_SAFEININT	(1<<6) /* SPP registers accessible in IRQ. */
+
+/* IEEE1284 modes: 
+   Nibble mode, byte mode, ECP, ECPRLE and EPP are their own
+   'extensibility request' values.  Others are special.
+   'Real' ECP modes must have the IEEE1284_MODE_ECP bit set.  */
+#define IEEE1284_MODE_NIBBLE             0
+#define IEEE1284_MODE_BYTE              (1<<0)
+#define IEEE1284_MODE_COMPAT            (1<<8)
+#define IEEE1284_MODE_BECP              (1<<9) /* Bounded ECP mode */
+#define IEEE1284_MODE_ECP               (1<<4)
+#define IEEE1284_MODE_ECPRLE            (IEEE1284_MODE_ECP | (1<<5))
+#define IEEE1284_MODE_ECPSWE            (1<<10) /* Software-emulated */
+#define IEEE1284_MODE_EPP               (1<<6)
+#define IEEE1284_MODE_EPPSL             (1<<11) /* EPP 1.7 */
+#define IEEE1284_MODE_EPPSWE            (1<<12) /* Software-emulated */
+#define IEEE1284_DEVICEID               (1<<2)  /* This is a flag */
+#define IEEE1284_EXT_LINK               (1<<14) /* This flag causes the
+						 * extensibility link to
+						 * be requested, using
+						 * bits 0-6. */
+
+/* For the benefit of parport_read/write, you can use these with
+ * parport_negotiate to use address operations.  They have no effect
+ * other than to make parport_read/write use address transfers. */
+#define IEEE1284_ADDR			(1<<13)	/* This is a flag */
+#define IEEE1284_DATA			 0	/* So is this */
+
+/* Flags for block transfer operations. */
+#define PARPORT_EPP_FAST		(1<<0) /* Unreliable counts. */
+#define PARPORT_W91284PIC		(1<<1) /* have a Warp9 w91284pic in the device */
+
+/* The rest is for the kernel only */
+#endif /* _UAPI_PARPORT_H_ */
diff --git a/include/uapi/linux/patchkey.h b/include/uapi/linux/patchkey.h
new file mode 100644
index 00000000000..1bda0e56bc5
--- /dev/null
+++ b/include/uapi/linux/patchkey.h
@@ -0,0 +1,37 @@
+/*
+ * <linux/patchkey.h> -- definition of _PATCHKEY macro
+ *
+ * Copyright (C) 2005 Stuart Brady
+ *
+ * This exists because awe_voice.h defined its own _PATCHKEY and it wasn't
+ * clear whether removing this would break anything in userspace.
+ *
+ * Do not include this file directly.  Please use <sys/soundcard.h> instead.
+ * For kernel code, use <linux/soundcard.h>
+ */
+
+#ifndef _LINUX_PATCHKEY_H_INDIRECT
+#error "patchkey.h included directly"
+#endif
+
+#ifndef _UAPI_LINUX_PATCHKEY_H
+#define _UAPI_LINUX_PATCHKEY_H
+
+/* Endian macros. */
+#ifndef __KERNEL__
+#  include <endian.h>
+#endif
+
+#if !defined(__KERNEL__)
+#if defined(__BYTE_ORDER)
+#  if __BYTE_ORDER == __BIG_ENDIAN
+#    define _PATCHKEY(id) (0xfd00|id)
+#  elif __BYTE_ORDER == __LITTLE_ENDIAN
+#    define _PATCHKEY(id) ((id<<8)|0x00fd)
+#  else
+#    error "could not determine byte order"
+#  endif
+#endif
+#endif
+
+#endif /* _UAPI_LINUX_PATCHKEY_H */
diff --git a/include/uapi/linux/pci.h b/include/uapi/linux/pci.h
new file mode 100644
index 00000000000..3c292bc0d1c
--- /dev/null
+++ b/include/uapi/linux/pci.h
@@ -0,0 +1,41 @@
+/*
+ *	pci.h
+ *
+ *	PCI defines and function prototypes
+ *	Copyright 1994, Drew Eckhardt
+ *	Copyright 1997--1999 Martin Mares <mj@ucw.cz>
+ *
+ *	For more information, please consult the following manuals (look at
+ *	http://www.pcisig.com/ for how to get them):
+ *
+ *	PCI BIOS Specification
+ *	PCI Local Bus Specification
+ *	PCI to PCI Bridge Specification
+ *	PCI System Design Guide
+ */
+
+#ifndef _UAPILINUX_PCI_H
+#define _UAPILINUX_PCI_H
+
+#include <linux/pci_regs.h>	/* The pci register defines */
+
+/*
+ * The PCI interface treats multi-function devices as independent
+ * devices.  The slot/function address of each device is encoded
+ * in a single byte as follows:
+ *
+ *	7:3 = slot
+ *	2:0 = function
+ */
+#define PCI_DEVFN(slot, func)	((((slot) & 0x1f) << 3) | ((func) & 0x07))
+#define PCI_SLOT(devfn)		(((devfn) >> 3) & 0x1f)
+#define PCI_FUNC(devfn)		((devfn) & 0x07)
+
+/* Ioctls for /proc/bus/pci/X/Y nodes. */
+#define PCIIOC_BASE		('P' << 24 | 'C' << 16 | 'I' << 8)
+#define PCIIOC_CONTROLLER	(PCIIOC_BASE | 0x00)	/* Get controller for PCI device. */
+#define PCIIOC_MMAP_IS_IO	(PCIIOC_BASE | 0x01)	/* Set mmap state to I/O space. */
+#define PCIIOC_MMAP_IS_MEM	(PCIIOC_BASE | 0x02)	/* Set mmap state to MEM space. */
+#define PCIIOC_WRITE_COMBINE	(PCIIOC_BASE | 0x03)	/* Enable/disable write-combining. */
+
+#endif /* _UAPILINUX_PCI_H */
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
new file mode 100644
index 00000000000..20ae747ddf3
--- /dev/null
+++ b/include/uapi/linux/pci_regs.h
@@ -0,0 +1,846 @@
+/*
+ *	pci_regs.h
+ *
+ *	PCI standard defines
+ *	Copyright 1994, Drew Eckhardt
+ *	Copyright 1997--1999 Martin Mares <mj@ucw.cz>
+ *
+ *	For more information, please consult the following manuals (look at
+ *	http://www.pcisig.com/ for how to get them):
+ *
+ *	PCI BIOS Specification
+ *	PCI Local Bus Specification
+ *	PCI to PCI Bridge Specification
+ *	PCI System Design Guide
+ *
+ * 	For hypertransport information, please consult the following manuals
+ * 	from http://www.hypertransport.org
+ *
+ *	The Hypertransport I/O Link Specification
+ */
+
+#ifndef LINUX_PCI_REGS_H
+#define LINUX_PCI_REGS_H
+
+/*
+ * Under PCI, each device has 256 bytes of configuration address space,
+ * of which the first 64 bytes are standardized as follows:
+ */
+#define PCI_STD_HEADER_SIZEOF	64
+#define PCI_VENDOR_ID		0x00	/* 16 bits */
+#define PCI_DEVICE_ID		0x02	/* 16 bits */
+#define PCI_COMMAND		0x04	/* 16 bits */
+#define  PCI_COMMAND_IO		0x1	/* Enable response in I/O space */
+#define  PCI_COMMAND_MEMORY	0x2	/* Enable response in Memory space */
+#define  PCI_COMMAND_MASTER	0x4	/* Enable bus mastering */
+#define  PCI_COMMAND_SPECIAL	0x8	/* Enable response to special cycles */
+#define  PCI_COMMAND_INVALIDATE	0x10	/* Use memory write and invalidate */
+#define  PCI_COMMAND_VGA_PALETTE 0x20	/* Enable palette snooping */
+#define  PCI_COMMAND_PARITY	0x40	/* Enable parity checking */
+#define  PCI_COMMAND_WAIT 	0x80	/* Enable address/data stepping */
+#define  PCI_COMMAND_SERR	0x100	/* Enable SERR */
+#define  PCI_COMMAND_FAST_BACK	0x200	/* Enable back-to-back writes */
+#define  PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */
+
+#define PCI_STATUS		0x06	/* 16 bits */
+#define  PCI_STATUS_INTERRUPT	0x08	/* Interrupt status */
+#define  PCI_STATUS_CAP_LIST	0x10	/* Support Capability List */
+#define  PCI_STATUS_66MHZ	0x20	/* Support 66 Mhz PCI 2.1 bus */
+#define  PCI_STATUS_UDF		0x40	/* Support User Definable Features [obsolete] */
+#define  PCI_STATUS_FAST_BACK	0x80	/* Accept fast-back to back */
+#define  PCI_STATUS_PARITY	0x100	/* Detected parity error */
+#define  PCI_STATUS_DEVSEL_MASK	0x600	/* DEVSEL timing */
+#define  PCI_STATUS_DEVSEL_FAST		0x000
+#define  PCI_STATUS_DEVSEL_MEDIUM	0x200
+#define  PCI_STATUS_DEVSEL_SLOW		0x400
+#define  PCI_STATUS_SIG_TARGET_ABORT	0x800 /* Set on target abort */
+#define  PCI_STATUS_REC_TARGET_ABORT	0x1000 /* Master ack of " */
+#define  PCI_STATUS_REC_MASTER_ABORT	0x2000 /* Set on master abort */
+#define  PCI_STATUS_SIG_SYSTEM_ERROR	0x4000 /* Set when we drive SERR */
+#define  PCI_STATUS_DETECTED_PARITY	0x8000 /* Set on parity error */
+
+#define PCI_CLASS_REVISION	0x08	/* High 24 bits are class, low 8 revision */
+#define PCI_REVISION_ID		0x08	/* Revision ID */
+#define PCI_CLASS_PROG		0x09	/* Reg. Level Programming Interface */
+#define PCI_CLASS_DEVICE	0x0a	/* Device class */
+
+#define PCI_CACHE_LINE_SIZE	0x0c	/* 8 bits */
+#define PCI_LATENCY_TIMER	0x0d	/* 8 bits */
+#define PCI_HEADER_TYPE		0x0e	/* 8 bits */
+#define  PCI_HEADER_TYPE_NORMAL		0
+#define  PCI_HEADER_TYPE_BRIDGE		1
+#define  PCI_HEADER_TYPE_CARDBUS	2
+
+#define PCI_BIST		0x0f	/* 8 bits */
+#define  PCI_BIST_CODE_MASK	0x0f	/* Return result */
+#define  PCI_BIST_START		0x40	/* 1 to start BIST, 2 secs or less */
+#define  PCI_BIST_CAPABLE	0x80	/* 1 if BIST capable */
+
+/*
+ * Base addresses specify locations in memory or I/O space.
+ * Decoded size can be determined by writing a value of
+ * 0xffffffff to the register, and reading it back.  Only
+ * 1 bits are decoded.
+ */
+#define PCI_BASE_ADDRESS_0	0x10	/* 32 bits */
+#define PCI_BASE_ADDRESS_1	0x14	/* 32 bits [htype 0,1 only] */
+#define PCI_BASE_ADDRESS_2	0x18	/* 32 bits [htype 0 only] */
+#define PCI_BASE_ADDRESS_3	0x1c	/* 32 bits */
+#define PCI_BASE_ADDRESS_4	0x20	/* 32 bits */
+#define PCI_BASE_ADDRESS_5	0x24	/* 32 bits */
+#define  PCI_BASE_ADDRESS_SPACE		0x01	/* 0 = memory, 1 = I/O */
+#define  PCI_BASE_ADDRESS_SPACE_IO	0x01
+#define  PCI_BASE_ADDRESS_SPACE_MEMORY	0x00
+#define  PCI_BASE_ADDRESS_MEM_TYPE_MASK	0x06
+#define  PCI_BASE_ADDRESS_MEM_TYPE_32	0x00	/* 32 bit address */
+#define  PCI_BASE_ADDRESS_MEM_TYPE_1M	0x02	/* Below 1M [obsolete] */
+#define  PCI_BASE_ADDRESS_MEM_TYPE_64	0x04	/* 64 bit address */
+#define  PCI_BASE_ADDRESS_MEM_PREFETCH	0x08	/* prefetchable? */
+#define  PCI_BASE_ADDRESS_MEM_MASK	(~0x0fUL)
+#define  PCI_BASE_ADDRESS_IO_MASK	(~0x03UL)
+/* bit 1 is reserved if address_space = 1 */
+
+/* Header type 0 (normal devices) */
+#define PCI_CARDBUS_CIS		0x28
+#define PCI_SUBSYSTEM_VENDOR_ID	0x2c
+#define PCI_SUBSYSTEM_ID	0x2e
+#define PCI_ROM_ADDRESS		0x30	/* Bits 31..11 are address, 10..1 reserved */
+#define  PCI_ROM_ADDRESS_ENABLE	0x01
+#define PCI_ROM_ADDRESS_MASK	(~0x7ffUL)
+
+#define PCI_CAPABILITY_LIST	0x34	/* Offset of first capability list entry */
+
+/* 0x35-0x3b are reserved */
+#define PCI_INTERRUPT_LINE	0x3c	/* 8 bits */
+#define PCI_INTERRUPT_PIN	0x3d	/* 8 bits */
+#define PCI_MIN_GNT		0x3e	/* 8 bits */
+#define PCI_MAX_LAT		0x3f	/* 8 bits */
+
+/* Header type 1 (PCI-to-PCI bridges) */
+#define PCI_PRIMARY_BUS		0x18	/* Primary bus number */
+#define PCI_SECONDARY_BUS	0x19	/* Secondary bus number */
+#define PCI_SUBORDINATE_BUS	0x1a	/* Highest bus number behind the bridge */
+#define PCI_SEC_LATENCY_TIMER	0x1b	/* Latency timer for secondary interface */
+#define PCI_IO_BASE		0x1c	/* I/O range behind the bridge */
+#define PCI_IO_LIMIT		0x1d
+#define  PCI_IO_RANGE_TYPE_MASK	0x0fUL	/* I/O bridging type */
+#define  PCI_IO_RANGE_TYPE_16	0x00
+#define  PCI_IO_RANGE_TYPE_32	0x01
+#define  PCI_IO_RANGE_MASK	(~0x0fUL) /* Standard 4K I/O windows */
+#define  PCI_IO_1K_RANGE_MASK	(~0x03UL) /* Intel 1K I/O windows */
+#define PCI_SEC_STATUS		0x1e	/* Secondary status register, only bit 14 used */
+#define PCI_MEMORY_BASE		0x20	/* Memory range behind */
+#define PCI_MEMORY_LIMIT	0x22
+#define  PCI_MEMORY_RANGE_TYPE_MASK 0x0fUL
+#define  PCI_MEMORY_RANGE_MASK	(~0x0fUL)
+#define PCI_PREF_MEMORY_BASE	0x24	/* Prefetchable memory range behind */
+#define PCI_PREF_MEMORY_LIMIT	0x26
+#define  PCI_PREF_RANGE_TYPE_MASK 0x0fUL
+#define  PCI_PREF_RANGE_TYPE_32	0x00
+#define  PCI_PREF_RANGE_TYPE_64	0x01
+#define  PCI_PREF_RANGE_MASK	(~0x0fUL)
+#define PCI_PREF_BASE_UPPER32	0x28	/* Upper half of prefetchable memory range */
+#define PCI_PREF_LIMIT_UPPER32	0x2c
+#define PCI_IO_BASE_UPPER16	0x30	/* Upper half of I/O addresses */
+#define PCI_IO_LIMIT_UPPER16	0x32
+/* 0x34 same as for htype 0 */
+/* 0x35-0x3b is reserved */
+#define PCI_ROM_ADDRESS1	0x38	/* Same as PCI_ROM_ADDRESS, but for htype 1 */
+/* 0x3c-0x3d are same as for htype 0 */
+#define PCI_BRIDGE_CONTROL	0x3e
+#define  PCI_BRIDGE_CTL_PARITY	0x01	/* Enable parity detection on secondary interface */
+#define  PCI_BRIDGE_CTL_SERR	0x02	/* The same for SERR forwarding */
+#define  PCI_BRIDGE_CTL_ISA	0x04	/* Enable ISA mode */
+#define  PCI_BRIDGE_CTL_VGA	0x08	/* Forward VGA addresses */
+#define  PCI_BRIDGE_CTL_MASTER_ABORT	0x20  /* Report master aborts */
+#define  PCI_BRIDGE_CTL_BUS_RESET	0x40	/* Secondary bus reset */
+#define  PCI_BRIDGE_CTL_FAST_BACK	0x80	/* Fast Back2Back enabled on secondary interface */
+
+/* Header type 2 (CardBus bridges) */
+#define PCI_CB_CAPABILITY_LIST	0x14
+/* 0x15 reserved */
+#define PCI_CB_SEC_STATUS	0x16	/* Secondary status */
+#define PCI_CB_PRIMARY_BUS	0x18	/* PCI bus number */
+#define PCI_CB_CARD_BUS		0x19	/* CardBus bus number */
+#define PCI_CB_SUBORDINATE_BUS	0x1a	/* Subordinate bus number */
+#define PCI_CB_LATENCY_TIMER	0x1b	/* CardBus latency timer */
+#define PCI_CB_MEMORY_BASE_0	0x1c
+#define PCI_CB_MEMORY_LIMIT_0	0x20
+#define PCI_CB_MEMORY_BASE_1	0x24
+#define PCI_CB_MEMORY_LIMIT_1	0x28
+#define PCI_CB_IO_BASE_0	0x2c
+#define PCI_CB_IO_BASE_0_HI	0x2e
+#define PCI_CB_IO_LIMIT_0	0x30
+#define PCI_CB_IO_LIMIT_0_HI	0x32
+#define PCI_CB_IO_BASE_1	0x34
+#define PCI_CB_IO_BASE_1_HI	0x36
+#define PCI_CB_IO_LIMIT_1	0x38
+#define PCI_CB_IO_LIMIT_1_HI	0x3a
+#define  PCI_CB_IO_RANGE_MASK	(~0x03UL)
+/* 0x3c-0x3d are same as for htype 0 */
+#define PCI_CB_BRIDGE_CONTROL	0x3e
+#define  PCI_CB_BRIDGE_CTL_PARITY	0x01	/* Similar to standard bridge control register */
+#define  PCI_CB_BRIDGE_CTL_SERR		0x02
+#define  PCI_CB_BRIDGE_CTL_ISA		0x04
+#define  PCI_CB_BRIDGE_CTL_VGA		0x08
+#define  PCI_CB_BRIDGE_CTL_MASTER_ABORT	0x20
+#define  PCI_CB_BRIDGE_CTL_CB_RESET	0x40	/* CardBus reset */
+#define  PCI_CB_BRIDGE_CTL_16BIT_INT	0x80	/* Enable interrupt for 16-bit cards */
+#define  PCI_CB_BRIDGE_CTL_PREFETCH_MEM0 0x100	/* Prefetch enable for both memory regions */
+#define  PCI_CB_BRIDGE_CTL_PREFETCH_MEM1 0x200
+#define  PCI_CB_BRIDGE_CTL_POST_WRITES	0x400
+#define PCI_CB_SUBSYSTEM_VENDOR_ID	0x40
+#define PCI_CB_SUBSYSTEM_ID		0x42
+#define PCI_CB_LEGACY_MODE_BASE		0x44	/* 16-bit PC Card legacy mode base address (ExCa) */
+/* 0x48-0x7f reserved */
+
+/* Capability lists */
+
+#define PCI_CAP_LIST_ID		0	/* Capability ID */
+#define  PCI_CAP_ID_PM		0x01	/* Power Management */
+#define  PCI_CAP_ID_AGP		0x02	/* Accelerated Graphics Port */
+#define  PCI_CAP_ID_VPD		0x03	/* Vital Product Data */
+#define  PCI_CAP_ID_SLOTID	0x04	/* Slot Identification */
+#define  PCI_CAP_ID_MSI		0x05	/* Message Signalled Interrupts */
+#define  PCI_CAP_ID_CHSWP	0x06	/* CompactPCI HotSwap */
+#define  PCI_CAP_ID_PCIX	0x07	/* PCI-X */
+#define  PCI_CAP_ID_HT		0x08	/* HyperTransport */
+#define  PCI_CAP_ID_VNDR	0x09	/* Vendor specific */
+#define  PCI_CAP_ID_DBG		0x0A	/* Debug port */
+#define  PCI_CAP_ID_CCRC	0x0B	/* CompactPCI Central Resource Control */
+#define  PCI_CAP_ID_SHPC 	0x0C	/* PCI Standard Hot-Plug Controller */
+#define  PCI_CAP_ID_SSVID	0x0D	/* Bridge subsystem vendor/device ID */
+#define  PCI_CAP_ID_AGP3	0x0E	/* AGP Target PCI-PCI bridge */
+#define  PCI_CAP_ID_SECDEV	0x0F	/* Secure Device */
+#define  PCI_CAP_ID_EXP 	0x10	/* PCI Express */
+#define  PCI_CAP_ID_MSIX	0x11	/* MSI-X */
+#define  PCI_CAP_ID_SATA	0x12	/* SATA Data/Index Conf. */
+#define  PCI_CAP_ID_AF		0x13	/* PCI Advanced Features */
+#define  PCI_CAP_ID_MAX		PCI_CAP_ID_AF
+#define PCI_CAP_LIST_NEXT	1	/* Next capability in the list */
+#define PCI_CAP_FLAGS		2	/* Capability defined flags (16 bits) */
+#define PCI_CAP_SIZEOF		4
+
+/* Power Management Registers */
+
+#define PCI_PM_PMC		2	/* PM Capabilities Register */
+#define  PCI_PM_CAP_VER_MASK	0x0007	/* Version */
+#define  PCI_PM_CAP_PME_CLOCK	0x0008	/* PME clock required */
+#define  PCI_PM_CAP_RESERVED    0x0010  /* Reserved field */
+#define  PCI_PM_CAP_DSI		0x0020	/* Device specific initialization */
+#define  PCI_PM_CAP_AUX_POWER	0x01C0	/* Auxiliary power support mask */
+#define  PCI_PM_CAP_D1		0x0200	/* D1 power state support */
+#define  PCI_PM_CAP_D2		0x0400	/* D2 power state support */
+#define  PCI_PM_CAP_PME		0x0800	/* PME pin supported */
+#define  PCI_PM_CAP_PME_MASK	0xF800	/* PME Mask of all supported states */
+#define  PCI_PM_CAP_PME_D0	0x0800	/* PME# from D0 */
+#define  PCI_PM_CAP_PME_D1	0x1000	/* PME# from D1 */
+#define  PCI_PM_CAP_PME_D2	0x2000	/* PME# from D2 */
+#define  PCI_PM_CAP_PME_D3	0x4000	/* PME# from D3 (hot) */
+#define  PCI_PM_CAP_PME_D3cold	0x8000	/* PME# from D3 (cold) */
+#define  PCI_PM_CAP_PME_SHIFT	11	/* Start of the PME Mask in PMC */
+#define PCI_PM_CTRL		4	/* PM control and status register */
+#define  PCI_PM_CTRL_STATE_MASK	0x0003	/* Current power state (D0 to D3) */
+#define  PCI_PM_CTRL_NO_SOFT_RESET	0x0008	/* No reset for D3hot->D0 */
+#define  PCI_PM_CTRL_PME_ENABLE	0x0100	/* PME pin enable */
+#define  PCI_PM_CTRL_DATA_SEL_MASK	0x1e00	/* Data select (??) */
+#define  PCI_PM_CTRL_DATA_SCALE_MASK	0x6000	/* Data scale (??) */
+#define  PCI_PM_CTRL_PME_STATUS	0x8000	/* PME pin status */
+#define PCI_PM_PPB_EXTENSIONS	6	/* PPB support extensions (??) */
+#define  PCI_PM_PPB_B2_B3	0x40	/* Stop clock when in D3hot (??) */
+#define  PCI_PM_BPCC_ENABLE	0x80	/* Bus power/clock control enable (??) */
+#define PCI_PM_DATA_REGISTER	7	/* (??) */
+#define PCI_PM_SIZEOF		8
+
+/* AGP registers */
+
+#define PCI_AGP_VERSION		2	/* BCD version number */
+#define PCI_AGP_RFU		3	/* Rest of capability flags */
+#define PCI_AGP_STATUS		4	/* Status register */
+#define  PCI_AGP_STATUS_RQ_MASK	0xff000000	/* Maximum number of requests - 1 */
+#define  PCI_AGP_STATUS_SBA	0x0200	/* Sideband addressing supported */
+#define  PCI_AGP_STATUS_64BIT	0x0020	/* 64-bit addressing supported */
+#define  PCI_AGP_STATUS_FW	0x0010	/* FW transfers supported */
+#define  PCI_AGP_STATUS_RATE4	0x0004	/* 4x transfer rate supported */
+#define  PCI_AGP_STATUS_RATE2	0x0002	/* 2x transfer rate supported */
+#define  PCI_AGP_STATUS_RATE1	0x0001	/* 1x transfer rate supported */
+#define PCI_AGP_COMMAND		8	/* Control register */
+#define  PCI_AGP_COMMAND_RQ_MASK 0xff000000  /* Master: Maximum number of requests */
+#define  PCI_AGP_COMMAND_SBA	0x0200	/* Sideband addressing enabled */
+#define  PCI_AGP_COMMAND_AGP	0x0100	/* Allow processing of AGP transactions */
+#define  PCI_AGP_COMMAND_64BIT	0x0020 	/* Allow processing of 64-bit addresses */
+#define  PCI_AGP_COMMAND_FW	0x0010 	/* Force FW transfers */
+#define  PCI_AGP_COMMAND_RATE4	0x0004	/* Use 4x rate */
+#define  PCI_AGP_COMMAND_RATE2	0x0002	/* Use 2x rate */
+#define  PCI_AGP_COMMAND_RATE1	0x0001	/* Use 1x rate */
+#define PCI_AGP_SIZEOF		12
+
+/* Vital Product Data */
+
+#define PCI_VPD_ADDR		2	/* Address to access (15 bits!) */
+#define  PCI_VPD_ADDR_MASK	0x7fff	/* Address mask */
+#define  PCI_VPD_ADDR_F		0x8000	/* Write 0, 1 indicates completion */
+#define PCI_VPD_DATA		4	/* 32-bits of data returned here */
+#define PCI_CAP_VPD_SIZEOF	8
+
+/* Slot Identification */
+
+#define PCI_SID_ESR		2	/* Expansion Slot Register */
+#define  PCI_SID_ESR_NSLOTS	0x1f	/* Number of expansion slots available */
+#define  PCI_SID_ESR_FIC	0x20	/* First In Chassis Flag */
+#define PCI_SID_CHASSIS_NR	3	/* Chassis Number */
+
+/* Message Signalled Interrupts registers */
+
+#define PCI_MSI_FLAGS		2	/* Various flags */
+#define  PCI_MSI_FLAGS_64BIT	0x80	/* 64-bit addresses allowed */
+#define  PCI_MSI_FLAGS_QSIZE	0x70	/* Message queue size configured */
+#define  PCI_MSI_FLAGS_QMASK	0x0e	/* Maximum queue size available */
+#define  PCI_MSI_FLAGS_ENABLE	0x01	/* MSI feature enabled */
+#define  PCI_MSI_FLAGS_MASKBIT	0x100	/* 64-bit mask bits allowed */
+#define PCI_MSI_RFU		3	/* Rest of capability flags */
+#define PCI_MSI_ADDRESS_LO	4	/* Lower 32 bits */
+#define PCI_MSI_ADDRESS_HI	8	/* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */
+#define PCI_MSI_DATA_32		8	/* 16 bits of data for 32-bit devices */
+#define PCI_MSI_MASK_32		12	/* Mask bits register for 32-bit devices */
+#define PCI_MSI_PENDING_32	16	/* Pending intrs for 32-bit devices */
+#define PCI_MSI_DATA_64		12	/* 16 bits of data for 64-bit devices */
+#define PCI_MSI_MASK_64		16	/* Mask bits register for 64-bit devices */
+#define PCI_MSI_PENDING_64	20	/* Pending intrs for 64-bit devices */
+
+/* MSI-X registers */
+#define PCI_MSIX_FLAGS		2
+#define  PCI_MSIX_FLAGS_QSIZE	0x7FF
+#define  PCI_MSIX_FLAGS_ENABLE	(1 << 15)
+#define  PCI_MSIX_FLAGS_MASKALL	(1 << 14)
+#define PCI_MSIX_TABLE		4
+#define PCI_MSIX_PBA		8
+#define  PCI_MSIX_FLAGS_BIRMASK	(7 << 0)
+#define PCI_CAP_MSIX_SIZEOF	12	/* size of MSIX registers */
+
+/* MSI-X entry's format */
+#define PCI_MSIX_ENTRY_SIZE		16
+#define  PCI_MSIX_ENTRY_LOWER_ADDR	0
+#define  PCI_MSIX_ENTRY_UPPER_ADDR	4
+#define  PCI_MSIX_ENTRY_DATA		8
+#define  PCI_MSIX_ENTRY_VECTOR_CTRL	12
+#define   PCI_MSIX_ENTRY_CTRL_MASKBIT	1
+
+/* CompactPCI Hotswap Register */
+
+#define PCI_CHSWP_CSR		2	/* Control and Status Register */
+#define  PCI_CHSWP_DHA		0x01	/* Device Hiding Arm */
+#define  PCI_CHSWP_EIM		0x02	/* ENUM# Signal Mask */
+#define  PCI_CHSWP_PIE		0x04	/* Pending Insert or Extract */
+#define  PCI_CHSWP_LOO		0x08	/* LED On / Off */
+#define  PCI_CHSWP_PI		0x30	/* Programming Interface */
+#define  PCI_CHSWP_EXT		0x40	/* ENUM# status - extraction */
+#define  PCI_CHSWP_INS		0x80	/* ENUM# status - insertion */
+
+/* PCI Advanced Feature registers */
+
+#define PCI_AF_LENGTH		2
+#define PCI_AF_CAP		3
+#define  PCI_AF_CAP_TP		0x01
+#define  PCI_AF_CAP_FLR		0x02
+#define PCI_AF_CTRL		4
+#define  PCI_AF_CTRL_FLR	0x01
+#define PCI_AF_STATUS		5
+#define  PCI_AF_STATUS_TP	0x01
+#define PCI_CAP_AF_SIZEOF	6	/* size of AF registers */
+
+/* PCI-X registers */
+
+#define PCI_X_CMD		2	/* Modes & Features */
+#define  PCI_X_CMD_DPERR_E	0x0001	/* Data Parity Error Recovery Enable */
+#define  PCI_X_CMD_ERO		0x0002	/* Enable Relaxed Ordering */
+#define  PCI_X_CMD_READ_512	0x0000	/* 512 byte maximum read byte count */
+#define  PCI_X_CMD_READ_1K	0x0004	/* 1Kbyte maximum read byte count */
+#define  PCI_X_CMD_READ_2K	0x0008	/* 2Kbyte maximum read byte count */
+#define  PCI_X_CMD_READ_4K	0x000c	/* 4Kbyte maximum read byte count */
+#define  PCI_X_CMD_MAX_READ	0x000c	/* Max Memory Read Byte Count */
+				/* Max # of outstanding split transactions */
+#define  PCI_X_CMD_SPLIT_1	0x0000	/* Max 1 */
+#define  PCI_X_CMD_SPLIT_2	0x0010	/* Max 2 */
+#define  PCI_X_CMD_SPLIT_3	0x0020	/* Max 3 */
+#define  PCI_X_CMD_SPLIT_4	0x0030	/* Max 4 */
+#define  PCI_X_CMD_SPLIT_8	0x0040	/* Max 8 */
+#define  PCI_X_CMD_SPLIT_12	0x0050	/* Max 12 */
+#define  PCI_X_CMD_SPLIT_16	0x0060	/* Max 16 */
+#define  PCI_X_CMD_SPLIT_32	0x0070	/* Max 32 */
+#define  PCI_X_CMD_MAX_SPLIT	0x0070	/* Max Outstanding Split Transactions */
+#define  PCI_X_CMD_VERSION(x) 	(((x) >> 12) & 3) /* Version */
+#define PCI_X_STATUS		4	/* PCI-X capabilities */
+#define  PCI_X_STATUS_DEVFN	0x000000ff	/* A copy of devfn */
+#define  PCI_X_STATUS_BUS	0x0000ff00	/* A copy of bus nr */
+#define  PCI_X_STATUS_64BIT	0x00010000	/* 64-bit device */
+#define  PCI_X_STATUS_133MHZ	0x00020000	/* 133 MHz capable */
+#define  PCI_X_STATUS_SPL_DISC	0x00040000	/* Split Completion Discarded */
+#define  PCI_X_STATUS_UNX_SPL	0x00080000	/* Unexpected Split Completion */
+#define  PCI_X_STATUS_COMPLEX	0x00100000	/* Device Complexity */
+#define  PCI_X_STATUS_MAX_READ	0x00600000	/* Designed Max Memory Read Count */
+#define  PCI_X_STATUS_MAX_SPLIT	0x03800000	/* Designed Max Outstanding Split Transactions */
+#define  PCI_X_STATUS_MAX_CUM	0x1c000000	/* Designed Max Cumulative Read Size */
+#define  PCI_X_STATUS_SPL_ERR	0x20000000	/* Rcvd Split Completion Error Msg */
+#define  PCI_X_STATUS_266MHZ	0x40000000	/* 266 MHz capable */
+#define  PCI_X_STATUS_533MHZ	0x80000000	/* 533 MHz capable */
+#define PCI_X_ECC_CSR		8	/* ECC control and status */
+#define PCI_CAP_PCIX_SIZEOF_V0	8	/* size of registers for Version 0 */
+#define PCI_CAP_PCIX_SIZEOF_V1	24	/* size for Version 1 */
+#define PCI_CAP_PCIX_SIZEOF_V2	PCI_CAP_PCIX_SIZEOF_V1	/* Same for v2 */
+
+/* PCI Bridge Subsystem ID registers */
+
+#define PCI_SSVID_VENDOR_ID     4	/* PCI-Bridge subsystem vendor id register */
+#define PCI_SSVID_DEVICE_ID     6	/* PCI-Bridge subsystem device id register */
+
+/* PCI Express capability registers */
+
+#define PCI_EXP_FLAGS		2	/* Capabilities register */
+#define PCI_EXP_FLAGS_VERS	0x000f	/* Capability version */
+#define PCI_EXP_FLAGS_TYPE	0x00f0	/* Device/Port type */
+#define  PCI_EXP_TYPE_ENDPOINT	0x0	/* Express Endpoint */
+#define  PCI_EXP_TYPE_LEG_END	0x1	/* Legacy Endpoint */
+#define  PCI_EXP_TYPE_ROOT_PORT 0x4	/* Root Port */
+#define  PCI_EXP_TYPE_UPSTREAM	0x5	/* Upstream Port */
+#define  PCI_EXP_TYPE_DOWNSTREAM 0x6	/* Downstream Port */
+#define  PCI_EXP_TYPE_PCI_BRIDGE 0x7	/* PCI/PCI-X Bridge */
+#define  PCI_EXP_TYPE_PCIE_BRIDGE 0x8	/* PCI/PCI-X to PCIE Bridge */
+#define  PCI_EXP_TYPE_RC_END	0x9	/* Root Complex Integrated Endpoint */
+#define  PCI_EXP_TYPE_RC_EC	0xa	/* Root Complex Event Collector */
+#define PCI_EXP_FLAGS_SLOT	0x0100	/* Slot implemented */
+#define PCI_EXP_FLAGS_IRQ	0x3e00	/* Interrupt message number */
+#define PCI_EXP_DEVCAP		4	/* Device capabilities */
+#define  PCI_EXP_DEVCAP_PAYLOAD	0x07	/* Max_Payload_Size */
+#define  PCI_EXP_DEVCAP_PHANTOM	0x18	/* Phantom functions */
+#define  PCI_EXP_DEVCAP_EXT_TAG	0x20	/* Extended tags */
+#define  PCI_EXP_DEVCAP_L0S	0x1c0	/* L0s Acceptable Latency */
+#define  PCI_EXP_DEVCAP_L1	0xe00	/* L1 Acceptable Latency */
+#define  PCI_EXP_DEVCAP_ATN_BUT	0x1000	/* Attention Button Present */
+#define  PCI_EXP_DEVCAP_ATN_IND	0x2000	/* Attention Indicator Present */
+#define  PCI_EXP_DEVCAP_PWR_IND	0x4000	/* Power Indicator Present */
+#define  PCI_EXP_DEVCAP_RBER	0x8000	/* Role-Based Error Reporting */
+#define  PCI_EXP_DEVCAP_PWR_VAL	0x3fc0000 /* Slot Power Limit Value */
+#define  PCI_EXP_DEVCAP_PWR_SCL	0xc000000 /* Slot Power Limit Scale */
+#define  PCI_EXP_DEVCAP_FLR     0x10000000 /* Function Level Reset */
+#define PCI_EXP_DEVCTL		8	/* Device Control */
+#define  PCI_EXP_DEVCTL_CERE	0x0001	/* Correctable Error Reporting En. */
+#define  PCI_EXP_DEVCTL_NFERE	0x0002	/* Non-Fatal Error Reporting Enable */
+#define  PCI_EXP_DEVCTL_FERE	0x0004	/* Fatal Error Reporting Enable */
+#define  PCI_EXP_DEVCTL_URRE	0x0008	/* Unsupported Request Reporting En. */
+#define  PCI_EXP_DEVCTL_RELAX_EN 0x0010 /* Enable relaxed ordering */
+#define  PCI_EXP_DEVCTL_PAYLOAD	0x00e0	/* Max_Payload_Size */
+#define  PCI_EXP_DEVCTL_EXT_TAG	0x0100	/* Extended Tag Field Enable */
+#define  PCI_EXP_DEVCTL_PHANTOM	0x0200	/* Phantom Functions Enable */
+#define  PCI_EXP_DEVCTL_AUX_PME	0x0400	/* Auxiliary Power PM Enable */
+#define  PCI_EXP_DEVCTL_NOSNOOP_EN 0x0800  /* Enable No Snoop */
+#define  PCI_EXP_DEVCTL_READRQ	0x7000	/* Max_Read_Request_Size */
+#define  PCI_EXP_DEVCTL_BCR_FLR 0x8000  /* Bridge Configuration Retry / FLR */
+#define PCI_EXP_DEVSTA		10	/* Device Status */
+#define  PCI_EXP_DEVSTA_CED	0x01	/* Correctable Error Detected */
+#define  PCI_EXP_DEVSTA_NFED	0x02	/* Non-Fatal Error Detected */
+#define  PCI_EXP_DEVSTA_FED	0x04	/* Fatal Error Detected */
+#define  PCI_EXP_DEVSTA_URD	0x08	/* Unsupported Request Detected */
+#define  PCI_EXP_DEVSTA_AUXPD	0x10	/* AUX Power Detected */
+#define  PCI_EXP_DEVSTA_TRPND	0x20	/* Transactions Pending */
+#define PCI_EXP_LNKCAP		12	/* Link Capabilities */
+#define  PCI_EXP_LNKCAP_SLS	0x0000000f /* Supported Link Speeds */
+#define  PCI_EXP_LNKCAP_MLW	0x000003f0 /* Maximum Link Width */
+#define  PCI_EXP_LNKCAP_ASPMS	0x00000c00 /* ASPM Support */
+#define  PCI_EXP_LNKCAP_L0SEL	0x00007000 /* L0s Exit Latency */
+#define  PCI_EXP_LNKCAP_L1EL	0x00038000 /* L1 Exit Latency */
+#define  PCI_EXP_LNKCAP_CLKPM	0x00040000 /* L1 Clock Power Management */
+#define  PCI_EXP_LNKCAP_SDERC	0x00080000 /* Surprise Down Error Reporting Capable */
+#define  PCI_EXP_LNKCAP_DLLLARC	0x00100000 /* Data Link Layer Link Active Reporting Capable */
+#define  PCI_EXP_LNKCAP_LBNC	0x00200000 /* Link Bandwidth Notification Capability */
+#define  PCI_EXP_LNKCAP_PN	0xff000000 /* Port Number */
+#define PCI_EXP_LNKCTL		16	/* Link Control */
+#define  PCI_EXP_LNKCTL_ASPMC	0x0003	/* ASPM Control */
+#define  PCI_EXP_LNKCTL_RCB	0x0008	/* Read Completion Boundary */
+#define  PCI_EXP_LNKCTL_LD	0x0010	/* Link Disable */
+#define  PCI_EXP_LNKCTL_RL	0x0020	/* Retrain Link */
+#define  PCI_EXP_LNKCTL_CCC	0x0040	/* Common Clock Configuration */
+#define  PCI_EXP_LNKCTL_ES	0x0080	/* Extended Synch */
+#define  PCI_EXP_LNKCTL_CLKREQ_EN 0x100	/* Enable clkreq */
+#define  PCI_EXP_LNKCTL_HAWD	0x0200	/* Hardware Autonomous Width Disable */
+#define  PCI_EXP_LNKCTL_LBMIE	0x0400	/* Link Bandwidth Management Interrupt Enable */
+#define  PCI_EXP_LNKCTL_LABIE	0x0800	/* Lnk Autonomous Bandwidth Interrupt Enable */
+#define PCI_EXP_LNKSTA		18	/* Link Status */
+#define  PCI_EXP_LNKSTA_CLS	0x000f	/* Current Link Speed */
+#define  PCI_EXP_LNKSTA_CLS_2_5GB 0x01	/* Current Link Speed 2.5GT/s */
+#define  PCI_EXP_LNKSTA_CLS_5_0GB 0x02	/* Current Link Speed 5.0GT/s */
+#define  PCI_EXP_LNKSTA_NLW	0x03f0	/* Nogotiated Link Width */
+#define  PCI_EXP_LNKSTA_NLW_SHIFT 4	/* start of NLW mask in link status */
+#define  PCI_EXP_LNKSTA_LT	0x0800	/* Link Training */
+#define  PCI_EXP_LNKSTA_SLC	0x1000	/* Slot Clock Configuration */
+#define  PCI_EXP_LNKSTA_DLLLA	0x2000	/* Data Link Layer Link Active */
+#define  PCI_EXP_LNKSTA_LBMS	0x4000	/* Link Bandwidth Management Status */
+#define  PCI_EXP_LNKSTA_LABS	0x8000	/* Link Autonomous Bandwidth Status */
+#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V1	20	/* v1 endpoints end here */
+#define PCI_EXP_SLTCAP		20	/* Slot Capabilities */
+#define  PCI_EXP_SLTCAP_ABP	0x00000001 /* Attention Button Present */
+#define  PCI_EXP_SLTCAP_PCP	0x00000002 /* Power Controller Present */
+#define  PCI_EXP_SLTCAP_MRLSP	0x00000004 /* MRL Sensor Present */
+#define  PCI_EXP_SLTCAP_AIP	0x00000008 /* Attention Indicator Present */
+#define  PCI_EXP_SLTCAP_PIP	0x00000010 /* Power Indicator Present */
+#define  PCI_EXP_SLTCAP_HPS	0x00000020 /* Hot-Plug Surprise */
+#define  PCI_EXP_SLTCAP_HPC	0x00000040 /* Hot-Plug Capable */
+#define  PCI_EXP_SLTCAP_SPLV	0x00007f80 /* Slot Power Limit Value */
+#define  PCI_EXP_SLTCAP_SPLS	0x00018000 /* Slot Power Limit Scale */
+#define  PCI_EXP_SLTCAP_EIP	0x00020000 /* Electromechanical Interlock Present */
+#define  PCI_EXP_SLTCAP_NCCS	0x00040000 /* No Command Completed Support */
+#define  PCI_EXP_SLTCAP_PSN	0xfff80000 /* Physical Slot Number */
+#define PCI_EXP_SLTCTL		24	/* Slot Control */
+#define  PCI_EXP_SLTCTL_ABPE	0x0001	/* Attention Button Pressed Enable */
+#define  PCI_EXP_SLTCTL_PFDE	0x0002	/* Power Fault Detected Enable */
+#define  PCI_EXP_SLTCTL_MRLSCE	0x0004	/* MRL Sensor Changed Enable */
+#define  PCI_EXP_SLTCTL_PDCE	0x0008	/* Presence Detect Changed Enable */
+#define  PCI_EXP_SLTCTL_CCIE	0x0010	/* Command Completed Interrupt Enable */
+#define  PCI_EXP_SLTCTL_HPIE	0x0020	/* Hot-Plug Interrupt Enable */
+#define  PCI_EXP_SLTCTL_AIC	0x00c0	/* Attention Indicator Control */
+#define  PCI_EXP_SLTCTL_PIC	0x0300	/* Power Indicator Control */
+#define  PCI_EXP_SLTCTL_PCC	0x0400	/* Power Controller Control */
+#define  PCI_EXP_SLTCTL_EIC	0x0800	/* Electromechanical Interlock Control */
+#define  PCI_EXP_SLTCTL_DLLSCE	0x1000	/* Data Link Layer State Changed Enable */
+#define PCI_EXP_SLTSTA		26	/* Slot Status */
+#define  PCI_EXP_SLTSTA_ABP	0x0001	/* Attention Button Pressed */
+#define  PCI_EXP_SLTSTA_PFD	0x0002	/* Power Fault Detected */
+#define  PCI_EXP_SLTSTA_MRLSC	0x0004	/* MRL Sensor Changed */
+#define  PCI_EXP_SLTSTA_PDC	0x0008	/* Presence Detect Changed */
+#define  PCI_EXP_SLTSTA_CC	0x0010	/* Command Completed */
+#define  PCI_EXP_SLTSTA_MRLSS	0x0020	/* MRL Sensor State */
+#define  PCI_EXP_SLTSTA_PDS	0x0040	/* Presence Detect State */
+#define  PCI_EXP_SLTSTA_EIS	0x0080	/* Electromechanical Interlock Status */
+#define  PCI_EXP_SLTSTA_DLLSC	0x0100	/* Data Link Layer State Changed */
+#define PCI_EXP_RTCTL		28	/* Root Control */
+#define  PCI_EXP_RTCTL_SECEE	0x01	/* System Error on Correctable Error */
+#define  PCI_EXP_RTCTL_SENFEE	0x02	/* System Error on Non-Fatal Error */
+#define  PCI_EXP_RTCTL_SEFEE	0x04	/* System Error on Fatal Error */
+#define  PCI_EXP_RTCTL_PMEIE	0x08	/* PME Interrupt Enable */
+#define  PCI_EXP_RTCTL_CRSSVE	0x10	/* CRS Software Visibility Enable */
+#define PCI_EXP_RTCAP		30	/* Root Capabilities */
+#define PCI_EXP_RTSTA		32	/* Root Status */
+#define PCI_EXP_RTSTA_PME	0x10000 /* PME status */
+#define PCI_EXP_RTSTA_PENDING	0x20000 /* PME pending */
+/*
+ * Note that the following PCI Express 'Capability Structure' registers
+ * were introduced with 'Capability Version' 0x2 (v2).  These registers
+ * do not exist on devices with Capability Version 1.  Use pci_pcie_cap2()
+ * to use these fields safely.
+ */
+#define PCI_EXP_DEVCAP2		36	/* Device Capabilities 2 */
+#define  PCI_EXP_DEVCAP2_ARI	0x20	/* Alternative Routing-ID */
+#define  PCI_EXP_DEVCAP2_LTR	0x800	/* Latency tolerance reporting */
+#define  PCI_EXP_OBFF_MASK	0xc0000 /* OBFF support mechanism */
+#define  PCI_EXP_OBFF_MSG	0x40000 /* New message signaling */
+#define  PCI_EXP_OBFF_WAKE	0x80000 /* Re-use WAKE# for OBFF */
+#define PCI_EXP_DEVCTL2		40	/* Device Control 2 */
+#define  PCI_EXP_DEVCTL2_ARI	0x20	/* Alternative Routing-ID */
+#define  PCI_EXP_IDO_REQ_EN	0x100	/* ID-based ordering request enable */
+#define  PCI_EXP_IDO_CMP_EN	0x200	/* ID-based ordering completion enable */
+#define  PCI_EXP_LTR_EN		0x400	/* Latency tolerance reporting */
+#define  PCI_EXP_OBFF_MSGA_EN	0x2000	/* OBFF enable with Message type A */
+#define  PCI_EXP_OBFF_MSGB_EN	0x4000	/* OBFF enable with Message type B */
+#define  PCI_EXP_OBFF_WAKE_EN	0x6000	/* OBFF using WAKE# signaling */
+#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2	44	/* v2 endpoints end here */
+#define PCI_EXP_LNKCAP2		44	/* Link Capability 2 */
+#define  PCI_EXP_LNKCAP2_SLS_2_5GB 0x01	/* Current Link Speed 2.5GT/s */
+#define  PCI_EXP_LNKCAP2_SLS_5_0GB 0x02	/* Current Link Speed 5.0GT/s */
+#define  PCI_EXP_LNKCAP2_SLS_8_0GB 0x04	/* Current Link Speed 8.0GT/s */
+#define  PCI_EXP_LNKCAP2_CROSSLINK 0x100 /* Crosslink supported */
+#define PCI_EXP_LNKCTL2		48	/* Link Control 2 */
+#define PCI_EXP_LNKSTA2		50	/* Link Status 2 */
+#define PCI_EXP_SLTCTL2		56	/* Slot Control 2 */
+
+/* Extended Capabilities (PCI-X 2.0 and Express) */
+#define PCI_EXT_CAP_ID(header)		(header & 0x0000ffff)
+#define PCI_EXT_CAP_VER(header)		((header >> 16) & 0xf)
+#define PCI_EXT_CAP_NEXT(header)	((header >> 20) & 0xffc)
+
+#define PCI_EXT_CAP_ID_ERR	0x01	/* Advanced Error Reporting */
+#define PCI_EXT_CAP_ID_VC	0x02	/* Virtual Channel Capability */
+#define PCI_EXT_CAP_ID_DSN	0x03	/* Device Serial Number */
+#define PCI_EXT_CAP_ID_PWR	0x04	/* Power Budgeting */
+#define PCI_EXT_CAP_ID_RCLD	0x05	/* Root Complex Link Declaration */
+#define PCI_EXT_CAP_ID_RCILC	0x06	/* Root Complex Internal Link Control */
+#define PCI_EXT_CAP_ID_RCEC	0x07	/* Root Complex Event Collector */
+#define PCI_EXT_CAP_ID_MFVC	0x08	/* Multi-Function VC Capability */
+#define PCI_EXT_CAP_ID_VC9	0x09	/* same as _VC */
+#define PCI_EXT_CAP_ID_RCRB	0x0A	/* Root Complex RB? */
+#define PCI_EXT_CAP_ID_VNDR	0x0B	/* Vendor Specific */
+#define PCI_EXT_CAP_ID_CAC	0x0C	/* Config Access - obsolete */
+#define PCI_EXT_CAP_ID_ACS	0x0D	/* Access Control Services */
+#define PCI_EXT_CAP_ID_ARI	0x0E	/* Alternate Routing ID */
+#define PCI_EXT_CAP_ID_ATS	0x0F	/* Address Translation Services */
+#define PCI_EXT_CAP_ID_SRIOV	0x10	/* Single Root I/O Virtualization */
+#define PCI_EXT_CAP_ID_MRIOV	0x11	/* Multi Root I/O Virtualization */
+#define PCI_EXT_CAP_ID_MCAST	0x12	/* Multicast */
+#define PCI_EXT_CAP_ID_PRI	0x13	/* Page Request Interface */
+#define PCI_EXT_CAP_ID_AMD_XXX	0x14	/* reserved for AMD */
+#define PCI_EXT_CAP_ID_REBAR	0x15	/* resizable BAR */
+#define PCI_EXT_CAP_ID_DPA	0x16	/* dynamic power alloc */
+#define PCI_EXT_CAP_ID_TPH	0x17	/* TPH request */
+#define PCI_EXT_CAP_ID_LTR	0x18	/* latency tolerance reporting */
+#define PCI_EXT_CAP_ID_SECPCI	0x19	/* Secondary PCIe */
+#define PCI_EXT_CAP_ID_PMUX	0x1A	/* Protocol Multiplexing */
+#define PCI_EXT_CAP_ID_PASID	0x1B	/* Process Address Space ID */
+#define PCI_EXT_CAP_ID_MAX	PCI_EXT_CAP_ID_PASID
+
+#define PCI_EXT_CAP_DSN_SIZEOF	12
+#define PCI_EXT_CAP_MCAST_ENDPOINT_SIZEOF 40
+
+/* Advanced Error Reporting */
+#define PCI_ERR_UNCOR_STATUS	4	/* Uncorrectable Error Status */
+#define  PCI_ERR_UNC_TRAIN	0x00000001	/* Training */
+#define  PCI_ERR_UNC_DLP	0x00000010	/* Data Link Protocol */
+#define  PCI_ERR_UNC_SURPDN	0x00000020	/* Surprise Down */
+#define  PCI_ERR_UNC_POISON_TLP	0x00001000	/* Poisoned TLP */
+#define  PCI_ERR_UNC_FCP	0x00002000	/* Flow Control Protocol */
+#define  PCI_ERR_UNC_COMP_TIME	0x00004000	/* Completion Timeout */
+#define  PCI_ERR_UNC_COMP_ABORT	0x00008000	/* Completer Abort */
+#define  PCI_ERR_UNC_UNX_COMP	0x00010000	/* Unexpected Completion */
+#define  PCI_ERR_UNC_RX_OVER	0x00020000	/* Receiver Overflow */
+#define  PCI_ERR_UNC_MALF_TLP	0x00040000	/* Malformed TLP */
+#define  PCI_ERR_UNC_ECRC	0x00080000	/* ECRC Error Status */
+#define  PCI_ERR_UNC_UNSUP	0x00100000	/* Unsupported Request */
+#define  PCI_ERR_UNC_ACSV	0x00200000	/* ACS Violation */
+#define  PCI_ERR_UNC_INTN	0x00400000	/* internal error */
+#define  PCI_ERR_UNC_MCBTLP	0x00800000	/* MC blocked TLP */
+#define  PCI_ERR_UNC_ATOMEG	0x01000000	/* Atomic egress blocked */
+#define  PCI_ERR_UNC_TLPPRE	0x02000000	/* TLP prefix blocked */
+#define PCI_ERR_UNCOR_MASK	8	/* Uncorrectable Error Mask */
+	/* Same bits as above */
+#define PCI_ERR_UNCOR_SEVER	12	/* Uncorrectable Error Severity */
+	/* Same bits as above */
+#define PCI_ERR_COR_STATUS	16	/* Correctable Error Status */
+#define  PCI_ERR_COR_RCVR	0x00000001	/* Receiver Error Status */
+#define  PCI_ERR_COR_BAD_TLP	0x00000040	/* Bad TLP Status */
+#define  PCI_ERR_COR_BAD_DLLP	0x00000080	/* Bad DLLP Status */
+#define  PCI_ERR_COR_REP_ROLL	0x00000100	/* REPLAY_NUM Rollover */
+#define  PCI_ERR_COR_REP_TIMER	0x00001000	/* Replay Timer Timeout */
+#define  PCI_ERR_COR_ADV_NFAT	0x00002000	/* Advisory Non-Fatal */
+#define  PCI_ERR_COR_INTERNAL	0x00004000	/* Corrected Internal */
+#define  PCI_ERR_COR_LOG_OVER	0x00008000	/* Header Log Overflow */
+#define PCI_ERR_COR_MASK	20	/* Correctable Error Mask */
+	/* Same bits as above */
+#define PCI_ERR_CAP		24	/* Advanced Error Capabilities */
+#define  PCI_ERR_CAP_FEP(x)	((x) & 31)	/* First Error Pointer */
+#define  PCI_ERR_CAP_ECRC_GENC	0x00000020	/* ECRC Generation Capable */
+#define  PCI_ERR_CAP_ECRC_GENE	0x00000040	/* ECRC Generation Enable */
+#define  PCI_ERR_CAP_ECRC_CHKC	0x00000080	/* ECRC Check Capable */
+#define  PCI_ERR_CAP_ECRC_CHKE	0x00000100	/* ECRC Check Enable */
+#define PCI_ERR_HEADER_LOG	28	/* Header Log Register (16 bytes) */
+#define PCI_ERR_ROOT_COMMAND	44	/* Root Error Command */
+/* Correctable Err Reporting Enable */
+#define PCI_ERR_ROOT_CMD_COR_EN		0x00000001
+/* Non-fatal Err Reporting Enable */
+#define PCI_ERR_ROOT_CMD_NONFATAL_EN	0x00000002
+/* Fatal Err Reporting Enable */
+#define PCI_ERR_ROOT_CMD_FATAL_EN	0x00000004
+#define PCI_ERR_ROOT_STATUS	48
+#define PCI_ERR_ROOT_COR_RCV		0x00000001	/* ERR_COR Received */
+/* Multi ERR_COR Received */
+#define PCI_ERR_ROOT_MULTI_COR_RCV	0x00000002
+/* ERR_FATAL/NONFATAL Recevied */
+#define PCI_ERR_ROOT_UNCOR_RCV		0x00000004
+/* Multi ERR_FATAL/NONFATAL Recevied */
+#define PCI_ERR_ROOT_MULTI_UNCOR_RCV	0x00000008
+#define PCI_ERR_ROOT_FIRST_FATAL	0x00000010	/* First Fatal */
+#define PCI_ERR_ROOT_NONFATAL_RCV	0x00000020	/* Non-Fatal Received */
+#define PCI_ERR_ROOT_FATAL_RCV		0x00000040	/* Fatal Received */
+#define PCI_ERR_ROOT_ERR_SRC	52	/* Error Source Identification */
+
+/* Virtual Channel */
+#define PCI_VC_PORT_REG1	4
+#define  PCI_VC_REG1_EVCC	0x7	/* extended vc count */
+#define PCI_VC_PORT_REG2	8
+#define  PCI_VC_REG2_32_PHASE	0x2
+#define  PCI_VC_REG2_64_PHASE	0x4
+#define  PCI_VC_REG2_128_PHASE	0x8
+#define PCI_VC_PORT_CTRL	12
+#define PCI_VC_PORT_STATUS	14
+#define PCI_VC_RES_CAP		16
+#define PCI_VC_RES_CTRL		20
+#define PCI_VC_RES_STATUS	26
+#define PCI_CAP_VC_BASE_SIZEOF		0x10
+#define PCI_CAP_VC_PER_VC_SIZEOF	0x0C
+
+/* Power Budgeting */
+#define PCI_PWR_DSR		4	/* Data Select Register */
+#define PCI_PWR_DATA		8	/* Data Register */
+#define  PCI_PWR_DATA_BASE(x)	((x) & 0xff)	    /* Base Power */
+#define  PCI_PWR_DATA_SCALE(x)	(((x) >> 8) & 3)    /* Data Scale */
+#define  PCI_PWR_DATA_PM_SUB(x)	(((x) >> 10) & 7)   /* PM Sub State */
+#define  PCI_PWR_DATA_PM_STATE(x) (((x) >> 13) & 3) /* PM State */
+#define  PCI_PWR_DATA_TYPE(x)	(((x) >> 15) & 7)   /* Type */
+#define  PCI_PWR_DATA_RAIL(x)	(((x) >> 18) & 7)   /* Power Rail */
+#define PCI_PWR_CAP		12	/* Capability */
+#define  PCI_PWR_CAP_BUDGET(x)	((x) & 1)	/* Included in system budget */
+#define PCI_EXT_CAP_PWR_SIZEOF	16
+
+/* Vendor-Specific (VSEC, PCI_EXT_CAP_ID_VNDR) */
+#define PCI_VNDR_HEADER		4	/* Vendor-Specific Header */
+#define  PCI_VNDR_HEADER_ID(x)	((x) & 0xffff)
+#define  PCI_VNDR_HEADER_REV(x)	(((x) >> 16) & 0xf)
+#define  PCI_VNDR_HEADER_LEN(x)	(((x) >> 20) & 0xfff)
+
+/*
+ * Hypertransport sub capability types
+ *
+ * Unfortunately there are both 3 bit and 5 bit capability types defined
+ * in the HT spec, catering for that is a little messy. You probably don't
+ * want to use these directly, just use pci_find_ht_capability() and it
+ * will do the right thing for you.
+ */
+#define HT_3BIT_CAP_MASK	0xE0
+#define HT_CAPTYPE_SLAVE	0x00	/* Slave/Primary link configuration */
+#define HT_CAPTYPE_HOST		0x20	/* Host/Secondary link configuration */
+
+#define HT_5BIT_CAP_MASK	0xF8
+#define HT_CAPTYPE_IRQ		0x80	/* IRQ Configuration */
+#define HT_CAPTYPE_REMAPPING_40	0xA0	/* 40 bit address remapping */
+#define HT_CAPTYPE_REMAPPING_64 0xA2	/* 64 bit address remapping */
+#define HT_CAPTYPE_UNITID_CLUMP	0x90	/* Unit ID clumping */
+#define HT_CAPTYPE_EXTCONF	0x98	/* Extended Configuration Space Access */
+#define HT_CAPTYPE_MSI_MAPPING	0xA8	/* MSI Mapping Capability */
+#define  HT_MSI_FLAGS		0x02		/* Offset to flags */
+#define  HT_MSI_FLAGS_ENABLE	0x1		/* Mapping enable */
+#define  HT_MSI_FLAGS_FIXED	0x2		/* Fixed mapping only */
+#define  HT_MSI_FIXED_ADDR	0x00000000FEE00000ULL	/* Fixed addr */
+#define  HT_MSI_ADDR_LO		0x04		/* Offset to low addr bits */
+#define  HT_MSI_ADDR_LO_MASK	0xFFF00000	/* Low address bit mask */
+#define  HT_MSI_ADDR_HI		0x08		/* Offset to high addr bits */
+#define HT_CAPTYPE_DIRECT_ROUTE	0xB0	/* Direct routing configuration */
+#define HT_CAPTYPE_VCSET	0xB8	/* Virtual Channel configuration */
+#define HT_CAPTYPE_ERROR_RETRY	0xC0	/* Retry on error configuration */
+#define HT_CAPTYPE_GEN3		0xD0	/* Generation 3 hypertransport configuration */
+#define HT_CAPTYPE_PM		0xE0	/* Hypertransport powermanagement configuration */
+#define HT_CAP_SIZEOF_LONG	28	/* slave & primary */
+#define HT_CAP_SIZEOF_SHORT	24	/* host & secondary */
+
+/* Alternative Routing-ID Interpretation */
+#define PCI_ARI_CAP		0x04	/* ARI Capability Register */
+#define  PCI_ARI_CAP_MFVC	0x0001	/* MFVC Function Groups Capability */
+#define  PCI_ARI_CAP_ACS	0x0002	/* ACS Function Groups Capability */
+#define  PCI_ARI_CAP_NFN(x)	(((x) >> 8) & 0xff) /* Next Function Number */
+#define PCI_ARI_CTRL		0x06	/* ARI Control Register */
+#define  PCI_ARI_CTRL_MFVC	0x0001	/* MFVC Function Groups Enable */
+#define  PCI_ARI_CTRL_ACS	0x0002	/* ACS Function Groups Enable */
+#define  PCI_ARI_CTRL_FG(x)	(((x) >> 4) & 7) /* Function Group */
+#define PCI_EXT_CAP_ARI_SIZEOF	8
+
+/* Address Translation Service */
+#define PCI_ATS_CAP		0x04	/* ATS Capability Register */
+#define  PCI_ATS_CAP_QDEP(x)	((x) & 0x1f)	/* Invalidate Queue Depth */
+#define  PCI_ATS_MAX_QDEP	32	/* Max Invalidate Queue Depth */
+#define PCI_ATS_CTRL		0x06	/* ATS Control Register */
+#define  PCI_ATS_CTRL_ENABLE	0x8000	/* ATS Enable */
+#define  PCI_ATS_CTRL_STU(x)	((x) & 0x1f)	/* Smallest Translation Unit */
+#define  PCI_ATS_MIN_STU	12	/* shift of minimum STU block */
+#define PCI_EXT_CAP_ATS_SIZEOF	8
+
+/* Page Request Interface */
+#define PCI_PRI_CTRL		0x04	/* PRI control register */
+#define  PCI_PRI_CTRL_ENABLE	0x01	/* Enable */
+#define  PCI_PRI_CTRL_RESET	0x02	/* Reset */
+#define PCI_PRI_STATUS		0x06	/* PRI status register */
+#define  PCI_PRI_STATUS_RF	0x001	/* Response Failure */
+#define  PCI_PRI_STATUS_UPRGI	0x002	/* Unexpected PRG index */
+#define  PCI_PRI_STATUS_STOPPED	0x100	/* PRI Stopped */
+#define PCI_PRI_MAX_REQ		0x08	/* PRI max reqs supported */
+#define PCI_PRI_ALLOC_REQ	0x0c	/* PRI max reqs allowed */
+#define PCI_EXT_CAP_PRI_SIZEOF	16
+
+/* PASID capability */
+#define PCI_PASID_CAP		0x04    /* PASID feature register */
+#define  PCI_PASID_CAP_EXEC	0x02	/* Exec permissions Supported */
+#define  PCI_PASID_CAP_PRIV	0x04	/* Priviledge Mode Supported */
+#define PCI_PASID_CTRL		0x06    /* PASID control register */
+#define  PCI_PASID_CTRL_ENABLE	0x01	/* Enable bit */
+#define  PCI_PASID_CTRL_EXEC	0x02	/* Exec permissions Enable */
+#define  PCI_PASID_CTRL_PRIV	0x04	/* Priviledge Mode Enable */
+#define PCI_EXT_CAP_PASID_SIZEOF	8
+
+/* Single Root I/O Virtualization */
+#define PCI_SRIOV_CAP		0x04	/* SR-IOV Capabilities */
+#define  PCI_SRIOV_CAP_VFM	0x01	/* VF Migration Capable */
+#define  PCI_SRIOV_CAP_INTR(x)	((x) >> 21) /* Interrupt Message Number */
+#define PCI_SRIOV_CTRL		0x08	/* SR-IOV Control */
+#define  PCI_SRIOV_CTRL_VFE	0x01	/* VF Enable */
+#define  PCI_SRIOV_CTRL_VFM	0x02	/* VF Migration Enable */
+#define  PCI_SRIOV_CTRL_INTR	0x04	/* VF Migration Interrupt Enable */
+#define  PCI_SRIOV_CTRL_MSE	0x08	/* VF Memory Space Enable */
+#define  PCI_SRIOV_CTRL_ARI	0x10	/* ARI Capable Hierarchy */
+#define PCI_SRIOV_STATUS	0x0a	/* SR-IOV Status */
+#define  PCI_SRIOV_STATUS_VFM	0x01	/* VF Migration Status */
+#define PCI_SRIOV_INITIAL_VF	0x0c	/* Initial VFs */
+#define PCI_SRIOV_TOTAL_VF	0x0e	/* Total VFs */
+#define PCI_SRIOV_NUM_VF	0x10	/* Number of VFs */
+#define PCI_SRIOV_FUNC_LINK	0x12	/* Function Dependency Link */
+#define PCI_SRIOV_VF_OFFSET	0x14	/* First VF Offset */
+#define PCI_SRIOV_VF_STRIDE	0x16	/* Following VF Stride */
+#define PCI_SRIOV_VF_DID	0x1a	/* VF Device ID */
+#define PCI_SRIOV_SUP_PGSIZE	0x1c	/* Supported Page Sizes */
+#define PCI_SRIOV_SYS_PGSIZE	0x20	/* System Page Size */
+#define PCI_SRIOV_BAR		0x24	/* VF BAR0 */
+#define  PCI_SRIOV_NUM_BARS	6	/* Number of VF BARs */
+#define PCI_SRIOV_VFM		0x3c	/* VF Migration State Array Offset*/
+#define  PCI_SRIOV_VFM_BIR(x)	((x) & 7)	/* State BIR */
+#define  PCI_SRIOV_VFM_OFFSET(x) ((x) & ~7)	/* State Offset */
+#define  PCI_SRIOV_VFM_UA	0x0	/* Inactive.Unavailable */
+#define  PCI_SRIOV_VFM_MI	0x1	/* Dormant.MigrateIn */
+#define  PCI_SRIOV_VFM_MO	0x2	/* Active.MigrateOut */
+#define  PCI_SRIOV_VFM_AV	0x3	/* Active.Available */
+#define PCI_EXT_CAP_SRIOV_SIZEOF 64
+
+#define PCI_LTR_MAX_SNOOP_LAT	0x4
+#define PCI_LTR_MAX_NOSNOOP_LAT	0x6
+#define  PCI_LTR_VALUE_MASK	0x000003ff
+#define  PCI_LTR_SCALE_MASK	0x00001c00
+#define  PCI_LTR_SCALE_SHIFT	10
+#define PCI_EXT_CAP_LTR_SIZEOF	8
+
+/* Access Control Service */
+#define PCI_ACS_CAP		0x04	/* ACS Capability Register */
+#define  PCI_ACS_SV		0x01	/* Source Validation */
+#define  PCI_ACS_TB		0x02	/* Translation Blocking */
+#define  PCI_ACS_RR		0x04	/* P2P Request Redirect */
+#define  PCI_ACS_CR		0x08	/* P2P Completion Redirect */
+#define  PCI_ACS_UF		0x10	/* Upstream Forwarding */
+#define  PCI_ACS_EC		0x20	/* P2P Egress Control */
+#define  PCI_ACS_DT		0x40	/* Direct Translated P2P */
+#define PCI_ACS_EGRESS_BITS	0x05	/* ACS Egress Control Vector Size */
+#define PCI_ACS_CTRL		0x06	/* ACS Control Register */
+#define PCI_ACS_EGRESS_CTL_V	0x08	/* ACS Egress Control Vector */
+
+#define PCI_VSEC_HDR		4	/* extended cap - vendor specific */
+#define  PCI_VSEC_HDR_LEN_SHIFT	20	/* shift for length field */
+
+/* sata capability */
+#define PCI_SATA_REGS		4	/* SATA REGs specifier */
+#define  PCI_SATA_REGS_MASK	0xF	/* location - BAR#/inline */
+#define  PCI_SATA_REGS_INLINE	0xF	/* REGS in config space */
+#define PCI_SATA_SIZEOF_SHORT	8
+#define PCI_SATA_SIZEOF_LONG	16
+
+/* resizable BARs */
+#define PCI_REBAR_CTRL		8	/* control register */
+#define  PCI_REBAR_CTRL_NBAR_MASK	(7 << 5)	/* mask for # bars */
+#define  PCI_REBAR_CTRL_NBAR_SHIFT	5	/* shift for # bars */
+
+/* dynamic power allocation */
+#define PCI_DPA_CAP		4	/* capability register */
+#define  PCI_DPA_CAP_SUBSTATE_MASK	0x1F	/* # substates - 1 */
+#define PCI_DPA_BASE_SIZEOF	16	/* size with 0 substates */
+
+/* TPH Requester */
+#define PCI_TPH_CAP		4	/* capability register */
+#define  PCI_TPH_CAP_LOC_MASK	0x600	/* location mask */
+#define   PCI_TPH_LOC_NONE	0x000	/* no location */
+#define   PCI_TPH_LOC_CAP	0x200	/* in capability */
+#define   PCI_TPH_LOC_MSIX	0x400	/* in MSI-X */
+#define PCI_TPH_CAP_ST_MASK	0x07FF0000	/* st table mask */
+#define PCI_TPH_CAP_ST_SHIFT	16	/* st table shift */
+#define PCI_TPH_BASE_SIZEOF	12	/* size with no st table */
+
+#endif /* LINUX_PCI_REGS_H */
diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h
new file mode 100644
index 00000000000..4f63c05d27c
--- /dev/null
+++ b/include/uapi/linux/perf_event.h
@@ -0,0 +1,615 @@
+/*
+ * Performance events:
+ *
+ *    Copyright (C) 2008-2009, Thomas Gleixner <tglx@linutronix.de>
+ *    Copyright (C) 2008-2011, Red Hat, Inc., Ingo Molnar
+ *    Copyright (C) 2008-2011, Red Hat, Inc., Peter Zijlstra
+ *
+ * Data type definitions, declarations, prototypes.
+ *
+ *    Started by: Thomas Gleixner and Ingo Molnar
+ *
+ * For licencing details see kernel-base/COPYING
+ */
+#ifndef _UAPI_LINUX_PERF_EVENT_H
+#define _UAPI_LINUX_PERF_EVENT_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+#include <asm/byteorder.h>
+
+/*
+ * User-space ABI bits:
+ */
+
+/*
+ * attr.type
+ */
+enum perf_type_id {
+	PERF_TYPE_HARDWARE			= 0,
+	PERF_TYPE_SOFTWARE			= 1,
+	PERF_TYPE_TRACEPOINT			= 2,
+	PERF_TYPE_HW_CACHE			= 3,
+	PERF_TYPE_RAW				= 4,
+	PERF_TYPE_BREAKPOINT			= 5,
+
+	PERF_TYPE_MAX,				/* non-ABI */
+};
+
+/*
+ * Generalized performance event event_id types, used by the
+ * attr.event_id parameter of the sys_perf_event_open()
+ * syscall:
+ */
+enum perf_hw_id {
+	/*
+	 * Common hardware events, generalized by the kernel:
+	 */
+	PERF_COUNT_HW_CPU_CYCLES		= 0,
+	PERF_COUNT_HW_INSTRUCTIONS		= 1,
+	PERF_COUNT_HW_CACHE_REFERENCES		= 2,
+	PERF_COUNT_HW_CACHE_MISSES		= 3,
+	PERF_COUNT_HW_BRANCH_INSTRUCTIONS	= 4,
+	PERF_COUNT_HW_BRANCH_MISSES		= 5,
+	PERF_COUNT_HW_BUS_CYCLES		= 6,
+	PERF_COUNT_HW_STALLED_CYCLES_FRONTEND	= 7,
+	PERF_COUNT_HW_STALLED_CYCLES_BACKEND	= 8,
+	PERF_COUNT_HW_REF_CPU_CYCLES		= 9,
+
+	PERF_COUNT_HW_MAX,			/* non-ABI */
+};
+
+/*
+ * Generalized hardware cache events:
+ *
+ *       { L1-D, L1-I, LLC, ITLB, DTLB, BPU, NODE } x
+ *       { read, write, prefetch } x
+ *       { accesses, misses }
+ */
+enum perf_hw_cache_id {
+	PERF_COUNT_HW_CACHE_L1D			= 0,
+	PERF_COUNT_HW_CACHE_L1I			= 1,
+	PERF_COUNT_HW_CACHE_LL			= 2,
+	PERF_COUNT_HW_CACHE_DTLB		= 3,
+	PERF_COUNT_HW_CACHE_ITLB		= 4,
+	PERF_COUNT_HW_CACHE_BPU			= 5,
+	PERF_COUNT_HW_CACHE_NODE		= 6,
+
+	PERF_COUNT_HW_CACHE_MAX,		/* non-ABI */
+};
+
+enum perf_hw_cache_op_id {
+	PERF_COUNT_HW_CACHE_OP_READ		= 0,
+	PERF_COUNT_HW_CACHE_OP_WRITE		= 1,
+	PERF_COUNT_HW_CACHE_OP_PREFETCH		= 2,
+
+	PERF_COUNT_HW_CACHE_OP_MAX,		/* non-ABI */
+};
+
+enum perf_hw_cache_op_result_id {
+	PERF_COUNT_HW_CACHE_RESULT_ACCESS	= 0,
+	PERF_COUNT_HW_CACHE_RESULT_MISS		= 1,
+
+	PERF_COUNT_HW_CACHE_RESULT_MAX,		/* non-ABI */
+};
+
+/*
+ * Special "software" events provided by the kernel, even if the hardware
+ * does not support performance events. These events measure various
+ * physical and sw events of the kernel (and allow the profiling of them as
+ * well):
+ */
+enum perf_sw_ids {
+	PERF_COUNT_SW_CPU_CLOCK			= 0,
+	PERF_COUNT_SW_TASK_CLOCK		= 1,
+	PERF_COUNT_SW_PAGE_FAULTS		= 2,
+	PERF_COUNT_SW_CONTEXT_SWITCHES		= 3,
+	PERF_COUNT_SW_CPU_MIGRATIONS		= 4,
+	PERF_COUNT_SW_PAGE_FAULTS_MIN		= 5,
+	PERF_COUNT_SW_PAGE_FAULTS_MAJ		= 6,
+	PERF_COUNT_SW_ALIGNMENT_FAULTS		= 7,
+	PERF_COUNT_SW_EMULATION_FAULTS		= 8,
+
+	PERF_COUNT_SW_MAX,			/* non-ABI */
+};
+
+/*
+ * Bits that can be set in attr.sample_type to request information
+ * in the overflow packets.
+ */
+enum perf_event_sample_format {
+	PERF_SAMPLE_IP				= 1U << 0,
+	PERF_SAMPLE_TID				= 1U << 1,
+	PERF_SAMPLE_TIME			= 1U << 2,
+	PERF_SAMPLE_ADDR			= 1U << 3,
+	PERF_SAMPLE_READ			= 1U << 4,
+	PERF_SAMPLE_CALLCHAIN			= 1U << 5,
+	PERF_SAMPLE_ID				= 1U << 6,
+	PERF_SAMPLE_CPU				= 1U << 7,
+	PERF_SAMPLE_PERIOD			= 1U << 8,
+	PERF_SAMPLE_STREAM_ID			= 1U << 9,
+	PERF_SAMPLE_RAW				= 1U << 10,
+	PERF_SAMPLE_BRANCH_STACK		= 1U << 11,
+	PERF_SAMPLE_REGS_USER			= 1U << 12,
+	PERF_SAMPLE_STACK_USER			= 1U << 13,
+
+	PERF_SAMPLE_MAX = 1U << 14,		/* non-ABI */
+};
+
+/*
+ * values to program into branch_sample_type when PERF_SAMPLE_BRANCH is set
+ *
+ * If the user does not pass priv level information via branch_sample_type,
+ * the kernel uses the event's priv level. Branch and event priv levels do
+ * not have to match. Branch priv level is checked for permissions.
+ *
+ * The branch types can be combined, however BRANCH_ANY covers all types
+ * of branches and therefore it supersedes all the other types.
+ */
+enum perf_branch_sample_type {
+	PERF_SAMPLE_BRANCH_USER		= 1U << 0, /* user branches */
+	PERF_SAMPLE_BRANCH_KERNEL	= 1U << 1, /* kernel branches */
+	PERF_SAMPLE_BRANCH_HV		= 1U << 2, /* hypervisor branches */
+
+	PERF_SAMPLE_BRANCH_ANY		= 1U << 3, /* any branch types */
+	PERF_SAMPLE_BRANCH_ANY_CALL	= 1U << 4, /* any call branch */
+	PERF_SAMPLE_BRANCH_ANY_RETURN	= 1U << 5, /* any return branch */
+	PERF_SAMPLE_BRANCH_IND_CALL	= 1U << 6, /* indirect calls */
+
+	PERF_SAMPLE_BRANCH_MAX		= 1U << 7, /* non-ABI */
+};
+
+#define PERF_SAMPLE_BRANCH_PLM_ALL \
+	(PERF_SAMPLE_BRANCH_USER|\
+	 PERF_SAMPLE_BRANCH_KERNEL|\
+	 PERF_SAMPLE_BRANCH_HV)
+
+/*
+ * Values to determine ABI of the registers dump.
+ */
+enum perf_sample_regs_abi {
+	PERF_SAMPLE_REGS_ABI_NONE	= 0,
+	PERF_SAMPLE_REGS_ABI_32		= 1,
+	PERF_SAMPLE_REGS_ABI_64		= 2,
+};
+
+/*
+ * The format of the data returned by read() on a perf event fd,
+ * as specified by attr.read_format:
+ *
+ * struct read_format {
+ *	{ u64		value;
+ *	  { u64		time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED
+ *	  { u64		time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING
+ *	  { u64		id;           } && PERF_FORMAT_ID
+ *	} && !PERF_FORMAT_GROUP
+ *
+ *	{ u64		nr;
+ *	  { u64		time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED
+ *	  { u64		time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING
+ *	  { u64		value;
+ *	    { u64	id;           } && PERF_FORMAT_ID
+ *	  }		cntr[nr];
+ *	} && PERF_FORMAT_GROUP
+ * };
+ */
+enum perf_event_read_format {
+	PERF_FORMAT_TOTAL_TIME_ENABLED		= 1U << 0,
+	PERF_FORMAT_TOTAL_TIME_RUNNING		= 1U << 1,
+	PERF_FORMAT_ID				= 1U << 2,
+	PERF_FORMAT_GROUP			= 1U << 3,
+
+	PERF_FORMAT_MAX = 1U << 4,		/* non-ABI */
+};
+
+#define PERF_ATTR_SIZE_VER0	64	/* sizeof first published struct */
+#define PERF_ATTR_SIZE_VER1	72	/* add: config2 */
+#define PERF_ATTR_SIZE_VER2	80	/* add: branch_sample_type */
+#define PERF_ATTR_SIZE_VER3	96	/* add: sample_regs_user */
+					/* add: sample_stack_user */
+
+/*
+ * Hardware event_id to monitor via a performance monitoring event:
+ */
+struct perf_event_attr {
+
+	/*
+	 * Major type: hardware/software/tracepoint/etc.
+	 */
+	__u32			type;
+
+	/*
+	 * Size of the attr structure, for fwd/bwd compat.
+	 */
+	__u32			size;
+
+	/*
+	 * Type specific configuration information.
+	 */
+	__u64			config;
+
+	union {
+		__u64		sample_period;
+		__u64		sample_freq;
+	};
+
+	__u64			sample_type;
+	__u64			read_format;
+
+	__u64			disabled       :  1, /* off by default        */
+				inherit	       :  1, /* children inherit it   */
+				pinned	       :  1, /* must always be on PMU */
+				exclusive      :  1, /* only group on PMU     */
+				exclude_user   :  1, /* don't count user      */
+				exclude_kernel :  1, /* ditto kernel          */
+				exclude_hv     :  1, /* ditto hypervisor      */
+				exclude_idle   :  1, /* don't count when idle */
+				mmap           :  1, /* include mmap data     */
+				comm	       :  1, /* include comm data     */
+				freq           :  1, /* use freq, not period  */
+				inherit_stat   :  1, /* per task counts       */
+				enable_on_exec :  1, /* next exec enables     */
+				task           :  1, /* trace fork/exit       */
+				watermark      :  1, /* wakeup_watermark      */
+				/*
+				 * precise_ip:
+				 *
+				 *  0 - SAMPLE_IP can have arbitrary skid
+				 *  1 - SAMPLE_IP must have constant skid
+				 *  2 - SAMPLE_IP requested to have 0 skid
+				 *  3 - SAMPLE_IP must have 0 skid
+				 *
+				 *  See also PERF_RECORD_MISC_EXACT_IP
+				 */
+				precise_ip     :  2, /* skid constraint       */
+				mmap_data      :  1, /* non-exec mmap data    */
+				sample_id_all  :  1, /* sample_type all events */
+
+				exclude_host   :  1, /* don't count in host   */
+				exclude_guest  :  1, /* don't count in guest  */
+
+				exclude_callchain_kernel : 1, /* exclude kernel callchains */
+				exclude_callchain_user   : 1, /* exclude user callchains */
+
+				__reserved_1   : 41;
+
+	union {
+		__u32		wakeup_events;	  /* wakeup every n events */
+		__u32		wakeup_watermark; /* bytes before wakeup   */
+	};
+
+	__u32			bp_type;
+	union {
+		__u64		bp_addr;
+		__u64		config1; /* extension of config */
+	};
+	union {
+		__u64		bp_len;
+		__u64		config2; /* extension of config1 */
+	};
+	__u64	branch_sample_type; /* enum perf_branch_sample_type */
+
+	/*
+	 * Defines set of user regs to dump on samples.
+	 * See asm/perf_regs.h for details.
+	 */
+	__u64	sample_regs_user;
+
+	/*
+	 * Defines size of the user stack to dump on samples.
+	 */
+	__u32	sample_stack_user;
+
+	/* Align to u64. */
+	__u32	__reserved_2;
+};
+
+#define perf_flags(attr)	(*(&(attr)->read_format + 1))
+
+/*
+ * Ioctls that can be done on a perf event fd:
+ */
+#define PERF_EVENT_IOC_ENABLE		_IO ('$', 0)
+#define PERF_EVENT_IOC_DISABLE		_IO ('$', 1)
+#define PERF_EVENT_IOC_REFRESH		_IO ('$', 2)
+#define PERF_EVENT_IOC_RESET		_IO ('$', 3)
+#define PERF_EVENT_IOC_PERIOD		_IOW('$', 4, __u64)
+#define PERF_EVENT_IOC_SET_OUTPUT	_IO ('$', 5)
+#define PERF_EVENT_IOC_SET_FILTER	_IOW('$', 6, char *)
+
+enum perf_event_ioc_flags {
+	PERF_IOC_FLAG_GROUP		= 1U << 0,
+};
+
+/*
+ * Structure of the page that can be mapped via mmap
+ */
+struct perf_event_mmap_page {
+	__u32	version;		/* version number of this structure */
+	__u32	compat_version;		/* lowest version this is compat with */
+
+	/*
+	 * Bits needed to read the hw events in user-space.
+	 *
+	 *   u32 seq, time_mult, time_shift, idx, width;
+	 *   u64 count, enabled, running;
+	 *   u64 cyc, time_offset;
+	 *   s64 pmc = 0;
+	 *
+	 *   do {
+	 *     seq = pc->lock;
+	 *     barrier()
+	 *
+	 *     enabled = pc->time_enabled;
+	 *     running = pc->time_running;
+	 *
+	 *     if (pc->cap_usr_time && enabled != running) {
+	 *       cyc = rdtsc();
+	 *       time_offset = pc->time_offset;
+	 *       time_mult   = pc->time_mult;
+	 *       time_shift  = pc->time_shift;
+	 *     }
+	 *
+	 *     idx = pc->index;
+	 *     count = pc->offset;
+	 *     if (pc->cap_usr_rdpmc && idx) {
+	 *       width = pc->pmc_width;
+	 *       pmc = rdpmc(idx - 1);
+	 *     }
+	 *
+	 *     barrier();
+	 *   } while (pc->lock != seq);
+	 *
+	 * NOTE: for obvious reason this only works on self-monitoring
+	 *       processes.
+	 */
+	__u32	lock;			/* seqlock for synchronization */
+	__u32	index;			/* hardware event identifier */
+	__s64	offset;			/* add to hardware event value */
+	__u64	time_enabled;		/* time event active */
+	__u64	time_running;		/* time event on cpu */
+	union {
+		__u64	capabilities;
+		__u64	cap_usr_time  : 1,
+			cap_usr_rdpmc : 1,
+			cap_____res   : 62;
+	};
+
+	/*
+	 * If cap_usr_rdpmc this field provides the bit-width of the value
+	 * read using the rdpmc() or equivalent instruction. This can be used
+	 * to sign extend the result like:
+	 *
+	 *   pmc <<= 64 - width;
+	 *   pmc >>= 64 - width; // signed shift right
+	 *   count += pmc;
+	 */
+	__u16	pmc_width;
+
+	/*
+	 * If cap_usr_time the below fields can be used to compute the time
+	 * delta since time_enabled (in ns) using rdtsc or similar.
+	 *
+	 *   u64 quot, rem;
+	 *   u64 delta;
+	 *
+	 *   quot = (cyc >> time_shift);
+	 *   rem = cyc & ((1 << time_shift) - 1);
+	 *   delta = time_offset + quot * time_mult +
+	 *              ((rem * time_mult) >> time_shift);
+	 *
+	 * Where time_offset,time_mult,time_shift and cyc are read in the
+	 * seqcount loop described above. This delta can then be added to
+	 * enabled and possible running (if idx), improving the scaling:
+	 *
+	 *   enabled += delta;
+	 *   if (idx)
+	 *     running += delta;
+	 *
+	 *   quot = count / running;
+	 *   rem  = count % running;
+	 *   count = quot * enabled + (rem * enabled) / running;
+	 */
+	__u16	time_shift;
+	__u32	time_mult;
+	__u64	time_offset;
+
+		/*
+		 * Hole for extension of the self monitor capabilities
+		 */
+
+	__u64	__reserved[120];	/* align to 1k */
+
+	/*
+	 * Control data for the mmap() data buffer.
+	 *
+	 * User-space reading the @data_head value should issue an rmb(), on
+	 * SMP capable platforms, after reading this value -- see
+	 * perf_event_wakeup().
+	 *
+	 * When the mapping is PROT_WRITE the @data_tail value should be
+	 * written by userspace to reflect the last read data. In this case
+	 * the kernel will not over-write unread data.
+	 */
+	__u64   data_head;		/* head in the data section */
+	__u64	data_tail;		/* user-space written tail */
+};
+
+#define PERF_RECORD_MISC_CPUMODE_MASK		(7 << 0)
+#define PERF_RECORD_MISC_CPUMODE_UNKNOWN	(0 << 0)
+#define PERF_RECORD_MISC_KERNEL			(1 << 0)
+#define PERF_RECORD_MISC_USER			(2 << 0)
+#define PERF_RECORD_MISC_HYPERVISOR		(3 << 0)
+#define PERF_RECORD_MISC_GUEST_KERNEL		(4 << 0)
+#define PERF_RECORD_MISC_GUEST_USER		(5 << 0)
+
+/*
+ * Indicates that the content of PERF_SAMPLE_IP points to
+ * the actual instruction that triggered the event. See also
+ * perf_event_attr::precise_ip.
+ */
+#define PERF_RECORD_MISC_EXACT_IP		(1 << 14)
+/*
+ * Reserve the last bit to indicate some extended misc field
+ */
+#define PERF_RECORD_MISC_EXT_RESERVED		(1 << 15)
+
+struct perf_event_header {
+	__u32	type;
+	__u16	misc;
+	__u16	size;
+};
+
+enum perf_event_type {
+
+	/*
+	 * If perf_event_attr.sample_id_all is set then all event types will
+	 * have the sample_type selected fields related to where/when
+	 * (identity) an event took place (TID, TIME, ID, CPU, STREAM_ID)
+	 * described in PERF_RECORD_SAMPLE below, it will be stashed just after
+	 * the perf_event_header and the fields already present for the existing
+	 * fields, i.e. at the end of the payload. That way a newer perf.data
+	 * file will be supported by older perf tools, with these new optional
+	 * fields being ignored.
+	 *
+	 * The MMAP events record the PROT_EXEC mappings so that we can
+	 * correlate userspace IPs to code. They have the following structure:
+	 *
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *
+	 *	u32				pid, tid;
+	 *	u64				addr;
+	 *	u64				len;
+	 *	u64				pgoff;
+	 *	char				filename[];
+	 * };
+	 */
+	PERF_RECORD_MMAP			= 1,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *	u64				id;
+	 *	u64				lost;
+	 * };
+	 */
+	PERF_RECORD_LOST			= 2,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *
+	 *	u32				pid, tid;
+	 *	char				comm[];
+	 * };
+	 */
+	PERF_RECORD_COMM			= 3,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *	u32				pid, ppid;
+	 *	u32				tid, ptid;
+	 *	u64				time;
+	 * };
+	 */
+	PERF_RECORD_EXIT			= 4,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *	u64				time;
+	 *	u64				id;
+	 *	u64				stream_id;
+	 * };
+	 */
+	PERF_RECORD_THROTTLE			= 5,
+	PERF_RECORD_UNTHROTTLE			= 6,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *	u32				pid, ppid;
+	 *	u32				tid, ptid;
+	 *	u64				time;
+	 * };
+	 */
+	PERF_RECORD_FORK			= 7,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *	u32				pid, tid;
+	 *
+	 *	struct read_format		values;
+	 * };
+	 */
+	PERF_RECORD_READ			= 8,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *
+	 *	{ u64			ip;	  } && PERF_SAMPLE_IP
+	 *	{ u32			pid, tid; } && PERF_SAMPLE_TID
+	 *	{ u64			time;     } && PERF_SAMPLE_TIME
+	 *	{ u64			addr;     } && PERF_SAMPLE_ADDR
+	 *	{ u64			id;	  } && PERF_SAMPLE_ID
+	 *	{ u64			stream_id;} && PERF_SAMPLE_STREAM_ID
+	 *	{ u32			cpu, res; } && PERF_SAMPLE_CPU
+	 *	{ u64			period;   } && PERF_SAMPLE_PERIOD
+	 *
+	 *	{ struct read_format	values;	  } && PERF_SAMPLE_READ
+	 *
+	 *	{ u64			nr,
+	 *	  u64			ips[nr];  } && PERF_SAMPLE_CALLCHAIN
+	 *
+	 *	#
+	 *	# The RAW record below is opaque data wrt the ABI
+	 *	#
+	 *	# That is, the ABI doesn't make any promises wrt to
+	 *	# the stability of its content, it may vary depending
+	 *	# on event, hardware, kernel version and phase of
+	 *	# the moon.
+	 *	#
+	 *	# In other words, PERF_SAMPLE_RAW contents are not an ABI.
+	 *	#
+	 *
+	 *	{ u32			size;
+	 *	  char                  data[size];}&& PERF_SAMPLE_RAW
+	 *
+	 *	{ u64 from, to, flags } lbr[nr];} && PERF_SAMPLE_BRANCH_STACK
+	 *
+	 * 	{ u64			abi; # enum perf_sample_regs_abi
+	 * 	  u64			regs[weight(mask)]; } && PERF_SAMPLE_REGS_USER
+	 *
+	 * 	{ u64			size;
+	 * 	  char			data[size];
+	 * 	  u64			dyn_size; } && PERF_SAMPLE_STACK_USER
+	 * };
+	 */
+	PERF_RECORD_SAMPLE			= 9,
+
+	PERF_RECORD_MAX,			/* non-ABI */
+};
+
+#define PERF_MAX_STACK_DEPTH		127
+
+enum perf_callchain_context {
+	PERF_CONTEXT_HV			= (__u64)-32,
+	PERF_CONTEXT_KERNEL		= (__u64)-128,
+	PERF_CONTEXT_USER		= (__u64)-512,
+
+	PERF_CONTEXT_GUEST		= (__u64)-2048,
+	PERF_CONTEXT_GUEST_KERNEL	= (__u64)-2176,
+	PERF_CONTEXT_GUEST_USER		= (__u64)-2560,
+
+	PERF_CONTEXT_MAX		= (__u64)-4095,
+};
+
+#define PERF_FLAG_FD_NO_GROUP		(1U << 0)
+#define PERF_FLAG_FD_OUTPUT		(1U << 1)
+#define PERF_FLAG_PID_CGROUP		(1U << 2) /* pid=cgroup id, per-cpu mode only */
+
+#endif /* _UAPI_LINUX_PERF_EVENT_H */
diff --git a/include/uapi/linux/personality.h b/include/uapi/linux/personality.h
new file mode 100644
index 00000000000..aa169c4339d
--- /dev/null
+++ b/include/uapi/linux/personality.h
@@ -0,0 +1,69 @@
+#ifndef _UAPI_LINUX_PERSONALITY_H
+#define _UAPI_LINUX_PERSONALITY_H
+
+
+/*
+ * Flags for bug emulation.
+ *
+ * These occupy the top three bytes.
+ */
+enum {
+	UNAME26	=               0x0020000,
+	ADDR_NO_RANDOMIZE = 	0x0040000,	/* disable randomization of VA space */
+	FDPIC_FUNCPTRS =	0x0080000,	/* userspace function ptrs point to descriptors
+						 * (signal handling)
+						 */
+	MMAP_PAGE_ZERO =	0x0100000,
+	ADDR_COMPAT_LAYOUT =	0x0200000,
+	READ_IMPLIES_EXEC =	0x0400000,
+	ADDR_LIMIT_32BIT =	0x0800000,
+	SHORT_INODE =		0x1000000,
+	WHOLE_SECONDS =		0x2000000,
+	STICKY_TIMEOUTS	=	0x4000000,
+	ADDR_LIMIT_3GB = 	0x8000000,
+};
+
+/*
+ * Security-relevant compatibility flags that must be
+ * cleared upon setuid or setgid exec:
+ */
+#define PER_CLEAR_ON_SETID (READ_IMPLIES_EXEC  | \
+			    ADDR_NO_RANDOMIZE  | \
+			    ADDR_COMPAT_LAYOUT | \
+			    MMAP_PAGE_ZERO)
+
+/*
+ * Personality types.
+ *
+ * These go in the low byte.  Avoid using the top bit, it will
+ * conflict with error returns.
+ */
+enum {
+	PER_LINUX =		0x0000,
+	PER_LINUX_32BIT =	0x0000 | ADDR_LIMIT_32BIT,
+	PER_LINUX_FDPIC =	0x0000 | FDPIC_FUNCPTRS,
+	PER_SVR4 =		0x0001 | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
+	PER_SVR3 =		0x0002 | STICKY_TIMEOUTS | SHORT_INODE,
+	PER_SCOSVR3 =		0x0003 | STICKY_TIMEOUTS |
+					 WHOLE_SECONDS | SHORT_INODE,
+	PER_OSR5 =		0x0003 | STICKY_TIMEOUTS | WHOLE_SECONDS,
+	PER_WYSEV386 =		0x0004 | STICKY_TIMEOUTS | SHORT_INODE,
+	PER_ISCR4 =		0x0005 | STICKY_TIMEOUTS,
+	PER_BSD =		0x0006,
+	PER_SUNOS =		0x0006 | STICKY_TIMEOUTS,
+	PER_XENIX =		0x0007 | STICKY_TIMEOUTS | SHORT_INODE,
+	PER_LINUX32 =		0x0008,
+	PER_LINUX32_3GB =	0x0008 | ADDR_LIMIT_3GB,
+	PER_IRIX32 =		0x0009 | STICKY_TIMEOUTS,/* IRIX5 32-bit */
+	PER_IRIXN32 =		0x000a | STICKY_TIMEOUTS,/* IRIX6 new 32-bit */
+	PER_IRIX64 =		0x000b | STICKY_TIMEOUTS,/* IRIX6 64-bit */
+	PER_RISCOS =		0x000c,
+	PER_SOLARIS =		0x000d | STICKY_TIMEOUTS,
+	PER_UW7 =		0x000e | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
+	PER_OSF4 =		0x000f,			 /* OSF/1 v4 */
+	PER_HPUX =		0x0010,
+	PER_MASK =		0x00ff,
+};
+
+
+#endif /* _UAPI_LINUX_PERSONALITY_H */
diff --git a/include/uapi/linux/pfkeyv2.h b/include/uapi/linux/pfkeyv2.h
new file mode 100644
index 00000000000..0b80c806631
--- /dev/null
+++ b/include/uapi/linux/pfkeyv2.h
@@ -0,0 +1,370 @@
+/* PF_KEY user interface, this is defined by rfc2367 so
+ * do not make arbitrary modifications or else this header
+ * file will not be compliant.
+ */
+
+#ifndef _LINUX_PFKEY2_H
+#define _LINUX_PFKEY2_H
+
+#include <linux/types.h>
+
+#define PF_KEY_V2		2
+#define PFKEYV2_REVISION	199806L
+
+struct sadb_msg {
+	__u8		sadb_msg_version;
+	__u8		sadb_msg_type;
+	__u8		sadb_msg_errno;
+	__u8		sadb_msg_satype;
+	__u16	sadb_msg_len;
+	__u16	sadb_msg_reserved;
+	__u32	sadb_msg_seq;
+	__u32	sadb_msg_pid;
+} __attribute__((packed));
+/* sizeof(struct sadb_msg) == 16 */
+
+struct sadb_ext {
+	__u16	sadb_ext_len;
+	__u16	sadb_ext_type;
+} __attribute__((packed));
+/* sizeof(struct sadb_ext) == 4 */
+
+struct sadb_sa {
+	__u16	sadb_sa_len;
+	__u16	sadb_sa_exttype;
+	__be32		sadb_sa_spi;
+	__u8		sadb_sa_replay;
+	__u8		sadb_sa_state;
+	__u8		sadb_sa_auth;
+	__u8		sadb_sa_encrypt;
+	__u32	sadb_sa_flags;
+} __attribute__((packed));
+/* sizeof(struct sadb_sa) == 16 */
+
+struct sadb_lifetime {
+	__u16	sadb_lifetime_len;
+	__u16	sadb_lifetime_exttype;
+	__u32	sadb_lifetime_allocations;
+	__u64	sadb_lifetime_bytes;
+	__u64	sadb_lifetime_addtime;
+	__u64	sadb_lifetime_usetime;
+} __attribute__((packed));
+/* sizeof(struct sadb_lifetime) == 32 */
+
+struct sadb_address {
+	__u16	sadb_address_len;
+	__u16	sadb_address_exttype;
+	__u8		sadb_address_proto;
+	__u8		sadb_address_prefixlen;
+	__u16	sadb_address_reserved;
+} __attribute__((packed));
+/* sizeof(struct sadb_address) == 8 */
+
+struct sadb_key {
+	__u16	sadb_key_len;
+	__u16	sadb_key_exttype;
+	__u16	sadb_key_bits;
+	__u16	sadb_key_reserved;
+} __attribute__((packed));
+/* sizeof(struct sadb_key) == 8 */
+
+struct sadb_ident {
+	__u16	sadb_ident_len;
+	__u16	sadb_ident_exttype;
+	__u16	sadb_ident_type;
+	__u16	sadb_ident_reserved;
+	__u64	sadb_ident_id;
+} __attribute__((packed));
+/* sizeof(struct sadb_ident) == 16 */
+
+struct sadb_sens {
+	__u16	sadb_sens_len;
+	__u16	sadb_sens_exttype;
+	__u32	sadb_sens_dpd;
+	__u8		sadb_sens_sens_level;
+	__u8		sadb_sens_sens_len;
+	__u8		sadb_sens_integ_level;
+	__u8		sadb_sens_integ_len;
+	__u32	sadb_sens_reserved;
+} __attribute__((packed));
+/* sizeof(struct sadb_sens) == 16 */
+
+/* followed by:
+	__u64	sadb_sens_bitmap[sens_len];
+	__u64	sadb_integ_bitmap[integ_len];  */
+
+struct sadb_prop {
+	__u16	sadb_prop_len;
+	__u16	sadb_prop_exttype;
+	__u8		sadb_prop_replay;
+	__u8		sadb_prop_reserved[3];
+} __attribute__((packed));
+/* sizeof(struct sadb_prop) == 8 */
+
+/* followed by:
+	struct sadb_comb sadb_combs[(sadb_prop_len +
+		sizeof(__u64) - sizeof(struct sadb_prop)) /
+		sizeof(struct sadb_comb)]; */
+
+struct sadb_comb {
+	__u8		sadb_comb_auth;
+	__u8		sadb_comb_encrypt;
+	__u16	sadb_comb_flags;
+	__u16	sadb_comb_auth_minbits;
+	__u16	sadb_comb_auth_maxbits;
+	__u16	sadb_comb_encrypt_minbits;
+	__u16	sadb_comb_encrypt_maxbits;
+	__u32	sadb_comb_reserved;
+	__u32	sadb_comb_soft_allocations;
+	__u32	sadb_comb_hard_allocations;
+	__u64	sadb_comb_soft_bytes;
+	__u64	sadb_comb_hard_bytes;
+	__u64	sadb_comb_soft_addtime;
+	__u64	sadb_comb_hard_addtime;
+	__u64	sadb_comb_soft_usetime;
+	__u64	sadb_comb_hard_usetime;
+} __attribute__((packed));
+/* sizeof(struct sadb_comb) == 72 */
+
+struct sadb_supported {
+	__u16	sadb_supported_len;
+	__u16	sadb_supported_exttype;
+	__u32	sadb_supported_reserved;
+} __attribute__((packed));
+/* sizeof(struct sadb_supported) == 8 */
+
+/* followed by:
+	struct sadb_alg sadb_algs[(sadb_supported_len +
+		sizeof(__u64) - sizeof(struct sadb_supported)) /
+		sizeof(struct sadb_alg)]; */
+
+struct sadb_alg {
+	__u8		sadb_alg_id;
+	__u8		sadb_alg_ivlen;
+	__u16	sadb_alg_minbits;
+	__u16	sadb_alg_maxbits;
+	__u16	sadb_alg_reserved;
+} __attribute__((packed));
+/* sizeof(struct sadb_alg) == 8 */
+
+struct sadb_spirange {
+	__u16	sadb_spirange_len;
+	__u16	sadb_spirange_exttype;
+	__u32	sadb_spirange_min;
+	__u32	sadb_spirange_max;
+	__u32	sadb_spirange_reserved;
+} __attribute__((packed));
+/* sizeof(struct sadb_spirange) == 16 */
+
+struct sadb_x_kmprivate {
+	__u16	sadb_x_kmprivate_len;
+	__u16	sadb_x_kmprivate_exttype;
+	__u32	sadb_x_kmprivate_reserved;
+} __attribute__((packed));
+/* sizeof(struct sadb_x_kmprivate) == 8 */
+
+struct sadb_x_sa2 {
+	__u16	sadb_x_sa2_len;
+	__u16	sadb_x_sa2_exttype;
+	__u8		sadb_x_sa2_mode;
+	__u8		sadb_x_sa2_reserved1;
+	__u16	sadb_x_sa2_reserved2;
+	__u32	sadb_x_sa2_sequence;
+	__u32	sadb_x_sa2_reqid;
+} __attribute__((packed));
+/* sizeof(struct sadb_x_sa2) == 16 */
+
+struct sadb_x_policy {
+	__u16	sadb_x_policy_len;
+	__u16	sadb_x_policy_exttype;
+	__u16	sadb_x_policy_type;
+	__u8		sadb_x_policy_dir;
+	__u8		sadb_x_policy_reserved;
+	__u32	sadb_x_policy_id;
+	__u32	sadb_x_policy_priority;
+} __attribute__((packed));
+/* sizeof(struct sadb_x_policy) == 16 */
+
+struct sadb_x_ipsecrequest {
+	__u16	sadb_x_ipsecrequest_len;
+	__u16	sadb_x_ipsecrequest_proto;
+	__u8		sadb_x_ipsecrequest_mode;
+	__u8		sadb_x_ipsecrequest_level;
+	__u16	sadb_x_ipsecrequest_reserved1;
+	__u32	sadb_x_ipsecrequest_reqid;
+	__u32	sadb_x_ipsecrequest_reserved2;
+} __attribute__((packed));
+/* sizeof(struct sadb_x_ipsecrequest) == 16 */
+
+/* This defines the TYPE of Nat Traversal in use.  Currently only one
+ * type of NAT-T is supported, draft-ietf-ipsec-udp-encaps-06
+ */
+struct sadb_x_nat_t_type {
+	__u16	sadb_x_nat_t_type_len;
+	__u16	sadb_x_nat_t_type_exttype;
+	__u8		sadb_x_nat_t_type_type;
+	__u8		sadb_x_nat_t_type_reserved[3];
+} __attribute__((packed));
+/* sizeof(struct sadb_x_nat_t_type) == 8 */
+
+/* Pass a NAT Traversal port (Source or Dest port) */
+struct sadb_x_nat_t_port {
+	__u16	sadb_x_nat_t_port_len;
+	__u16	sadb_x_nat_t_port_exttype;
+	__be16		sadb_x_nat_t_port_port;
+	__u16	sadb_x_nat_t_port_reserved;
+} __attribute__((packed));
+/* sizeof(struct sadb_x_nat_t_port) == 8 */
+
+/* Generic LSM security context */
+struct sadb_x_sec_ctx {
+	__u16	sadb_x_sec_len;
+	__u16	sadb_x_sec_exttype;
+	__u8		sadb_x_ctx_alg;  /* LSMs: e.g., selinux == 1 */
+	__u8		sadb_x_ctx_doi;
+	__u16	sadb_x_ctx_len;
+} __attribute__((packed));
+/* sizeof(struct sadb_sec_ctx) = 8 */
+
+/* Used by MIGRATE to pass addresses IKE will use to perform
+ * negotiation with the peer */
+struct sadb_x_kmaddress {
+	__u16	sadb_x_kmaddress_len;
+	__u16	sadb_x_kmaddress_exttype;
+	__u32	sadb_x_kmaddress_reserved;
+} __attribute__((packed));
+/* sizeof(struct sadb_x_kmaddress) == 8 */
+
+/* Message types */
+#define SADB_RESERVED		0
+#define SADB_GETSPI		1
+#define SADB_UPDATE		2
+#define SADB_ADD		3
+#define SADB_DELETE		4
+#define SADB_GET		5
+#define SADB_ACQUIRE		6
+#define SADB_REGISTER		7
+#define SADB_EXPIRE		8
+#define SADB_FLUSH		9
+#define SADB_DUMP		10
+#define SADB_X_PROMISC		11
+#define SADB_X_PCHANGE		12
+#define SADB_X_SPDUPDATE	13
+#define SADB_X_SPDADD		14
+#define SADB_X_SPDDELETE	15
+#define SADB_X_SPDGET		16
+#define SADB_X_SPDACQUIRE	17
+#define SADB_X_SPDDUMP		18
+#define SADB_X_SPDFLUSH		19
+#define SADB_X_SPDSETIDX	20
+#define SADB_X_SPDEXPIRE	21
+#define SADB_X_SPDDELETE2	22
+#define SADB_X_NAT_T_NEW_MAPPING	23
+#define SADB_X_MIGRATE		24
+#define SADB_MAX		24
+
+/* Security Association flags */
+#define SADB_SAFLAGS_PFS	1
+#define SADB_SAFLAGS_NOPMTUDISC	0x20000000
+#define SADB_SAFLAGS_DECAP_DSCP	0x40000000
+#define SADB_SAFLAGS_NOECN	0x80000000
+
+/* Security Association states */
+#define SADB_SASTATE_LARVAL	0
+#define SADB_SASTATE_MATURE	1
+#define SADB_SASTATE_DYING	2
+#define SADB_SASTATE_DEAD	3
+#define SADB_SASTATE_MAX	3
+
+/* Security Association types */
+#define SADB_SATYPE_UNSPEC	0
+#define SADB_SATYPE_AH		2
+#define SADB_SATYPE_ESP		3
+#define SADB_SATYPE_RSVP	5
+#define SADB_SATYPE_OSPFV2	6
+#define SADB_SATYPE_RIPV2	7
+#define SADB_SATYPE_MIP		8
+#define SADB_X_SATYPE_IPCOMP	9
+#define SADB_SATYPE_MAX		9
+
+/* Authentication algorithms */
+#define SADB_AALG_NONE			0
+#define SADB_AALG_MD5HMAC		2
+#define SADB_AALG_SHA1HMAC		3
+#define SADB_X_AALG_SHA2_256HMAC	5
+#define SADB_X_AALG_SHA2_384HMAC	6
+#define SADB_X_AALG_SHA2_512HMAC	7
+#define SADB_X_AALG_RIPEMD160HMAC	8
+#define SADB_X_AALG_AES_XCBC_MAC	9
+#define SADB_X_AALG_NULL		251	/* kame */
+#define SADB_AALG_MAX			251
+
+/* Encryption algorithms */
+#define SADB_EALG_NONE			0
+#define SADB_EALG_DESCBC		2
+#define SADB_EALG_3DESCBC		3
+#define SADB_X_EALG_CASTCBC		6
+#define SADB_X_EALG_BLOWFISHCBC		7
+#define SADB_EALG_NULL			11
+#define SADB_X_EALG_AESCBC		12
+#define SADB_X_EALG_AESCTR		13
+#define SADB_X_EALG_AES_CCM_ICV8	14
+#define SADB_X_EALG_AES_CCM_ICV12	15
+#define SADB_X_EALG_AES_CCM_ICV16	16
+#define SADB_X_EALG_AES_GCM_ICV8	18
+#define SADB_X_EALG_AES_GCM_ICV12	19
+#define SADB_X_EALG_AES_GCM_ICV16	20
+#define SADB_X_EALG_CAMELLIACBC		22
+#define SADB_X_EALG_NULL_AES_GMAC	23
+#define SADB_EALG_MAX                   253 /* last EALG */
+/* private allocations should use 249-255 (RFC2407) */
+#define SADB_X_EALG_SERPENTCBC  252     /* draft-ietf-ipsec-ciph-aes-cbc-00 */
+#define SADB_X_EALG_TWOFISHCBC  253     /* draft-ietf-ipsec-ciph-aes-cbc-00 */
+
+/* Compression algorithms */
+#define SADB_X_CALG_NONE		0
+#define SADB_X_CALG_OUI			1
+#define SADB_X_CALG_DEFLATE		2
+#define SADB_X_CALG_LZS			3
+#define SADB_X_CALG_LZJH		4
+#define SADB_X_CALG_MAX			4
+
+/* Extension Header values */
+#define SADB_EXT_RESERVED		0
+#define SADB_EXT_SA			1
+#define SADB_EXT_LIFETIME_CURRENT	2
+#define SADB_EXT_LIFETIME_HARD		3
+#define SADB_EXT_LIFETIME_SOFT		4
+#define SADB_EXT_ADDRESS_SRC		5
+#define SADB_EXT_ADDRESS_DST		6
+#define SADB_EXT_ADDRESS_PROXY		7
+#define SADB_EXT_KEY_AUTH		8
+#define SADB_EXT_KEY_ENCRYPT		9
+#define SADB_EXT_IDENTITY_SRC		10
+#define SADB_EXT_IDENTITY_DST		11
+#define SADB_EXT_SENSITIVITY		12
+#define SADB_EXT_PROPOSAL		13
+#define SADB_EXT_SUPPORTED_AUTH		14
+#define SADB_EXT_SUPPORTED_ENCRYPT	15
+#define SADB_EXT_SPIRANGE		16
+#define SADB_X_EXT_KMPRIVATE		17
+#define SADB_X_EXT_POLICY		18
+#define SADB_X_EXT_SA2			19
+/* The next four entries are for setting up NAT Traversal */
+#define SADB_X_EXT_NAT_T_TYPE		20
+#define SADB_X_EXT_NAT_T_SPORT		21
+#define SADB_X_EXT_NAT_T_DPORT		22
+#define SADB_X_EXT_NAT_T_OA		23
+#define SADB_X_EXT_SEC_CTX		24
+/* Used with MIGRATE to pass @ to IKE for negotiation */
+#define SADB_X_EXT_KMADDRESS		25
+#define SADB_EXT_MAX			25
+
+/* Identity Extension values */
+#define SADB_IDENTTYPE_RESERVED	0
+#define SADB_IDENTTYPE_PREFIX	1
+#define SADB_IDENTTYPE_FQDN	2
+#define SADB_IDENTTYPE_USERFQDN	3
+#define SADB_IDENTTYPE_MAX	3
+
+#endif /* !(_LINUX_PFKEY2_H) */
diff --git a/include/uapi/linux/pg.h b/include/uapi/linux/pg.h
new file mode 100644
index 00000000000..db994bb0c79
--- /dev/null
+++ b/include/uapi/linux/pg.h
@@ -0,0 +1,63 @@
+/* 	pg.h (c) 1998  Grant R. Guenther <grant@torque.net>
+ 		       Under the terms of the GNU General Public License
+
+
+	pg.h defines the user interface to the generic ATAPI packet
+        command driver for parallel port ATAPI devices (pg). The
+	driver is loosely modelled after the generic SCSI driver, sg,
+	although the actual interface is different.
+
+	The pg driver provides a simple character device interface for
+        sending ATAPI commands to a device.  With the exception of the
+	ATAPI reset operation, all operations are performed by a pair
+        of read and write operations to the appropriate /dev/pgN device.
+	A write operation delivers a command and any outbound data in
+        a single buffer.  Normally, the write will succeed unless the
+        device is offline or malfunctioning, or there is already another
+	command pending.  If the write succeeds, it should be followed
+        immediately by a read operation, to obtain any returned data and
+        status information.  A read will fail if there is no operation
+        in progress.
+
+	As a special case, the device can be reset with a write operation,
+        and in this case, no following read is expected, or permitted.
+
+	There are no ioctl() operations.  Any single operation
+	may transfer at most PG_MAX_DATA bytes.  Note that the driver must
+        copy the data through an internal buffer.  In keeping with all
+	current ATAPI devices, command packets are assumed to be exactly
+	12 bytes in length.
+
+	To permit future changes to this interface, the headers in the
+	read and write buffers contain a single character "magic" flag.
+        Currently this flag must be the character "P".
+
+*/
+
+#define PG_MAGIC	'P'
+#define PG_RESET	'Z'
+#define PG_COMMAND	'C'
+
+#define PG_MAX_DATA	32768
+
+struct pg_write_hdr {
+
+	char	magic;		/* == PG_MAGIC */
+	char	func;		/* PG_RESET or PG_COMMAND */
+	int     dlen;		/* number of bytes expected to transfer */
+	int     timeout;	/* number of seconds before timeout */
+	char	packet[12];	/* packet command */
+
+};
+
+struct pg_read_hdr {
+
+	char	magic;		/* == PG_MAGIC */
+	char	scsi;		/* "scsi" status == sense key */
+	int	dlen;		/* size of device transfer request */
+	int     duration;	/* time in seconds command took */
+	char    pad[12];	/* not used */
+
+};
+
+/* end of pg.h */
diff --git a/include/uapi/linux/phantom.h b/include/uapi/linux/phantom.h
new file mode 100644
index 00000000000..94dd6645c60
--- /dev/null
+++ b/include/uapi/linux/phantom.h
@@ -0,0 +1,49 @@
+/*
+ *  Copyright (C) 2005-2007 Jiri Slaby <jirislaby@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ */
+
+#ifndef __PHANTOM_H
+#define __PHANTOM_H
+
+#include <linux/types.h>
+
+/* PHN_(G/S)ET_REG param */
+struct phm_reg {
+	__u32 reg;
+	__u32 value;
+};
+
+/* PHN_(G/S)ET_REGS param */
+struct phm_regs {
+	__u32 count;
+	__u32 mask;
+	__u32 values[8];
+};
+
+#define PH_IOC_MAGIC		'p'
+#define PHN_GET_REG		_IOWR(PH_IOC_MAGIC, 0, struct phm_reg *)
+#define PHN_SET_REG		_IOW(PH_IOC_MAGIC, 1, struct phm_reg *)
+#define PHN_GET_REGS		_IOWR(PH_IOC_MAGIC, 2, struct phm_regs *)
+#define PHN_SET_REGS		_IOW(PH_IOC_MAGIC, 3, struct phm_regs *)
+/* this ioctl tells the driver, that the caller is not OpenHaptics and might
+ * use improved registers update (no more phantom switchoffs when using
+ * libphantom) */
+#define PHN_NOT_OH		_IO(PH_IOC_MAGIC, 4)
+#define PHN_GETREG		_IOWR(PH_IOC_MAGIC, 5, struct phm_reg)
+#define PHN_SETREG		_IOW(PH_IOC_MAGIC, 6, struct phm_reg)
+#define PHN_GETREGS		_IOWR(PH_IOC_MAGIC, 7, struct phm_regs)
+#define PHN_SETREGS		_IOW(PH_IOC_MAGIC, 8, struct phm_regs)
+
+#define PHN_CONTROL		0x6     /* control byte in iaddr space */
+#define PHN_CTL_AMP		0x1     /*   switch after torques change */
+#define PHN_CTL_BUT		0x2     /*   is button switched */
+#define PHN_CTL_IRQ		0x10    /*   is irq enabled */
+
+#define PHN_ZERO_FORCE		2048	/* zero torque on motor */
+
+#endif
diff --git a/include/uapi/linux/phonet.h b/include/uapi/linux/phonet.h
new file mode 100644
index 00000000000..a3e1d65b3ed
--- /dev/null
+++ b/include/uapi/linux/phonet.h
@@ -0,0 +1,185 @@
+/**
+ * file phonet.h
+ *
+ * Phonet sockets kernel interface
+ *
+ * Copyright (C) 2008 Nokia Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef _UAPILINUX_PHONET_H
+#define _UAPILINUX_PHONET_H
+
+#include <linux/types.h>
+#include <linux/socket.h>
+
+/* Automatic protocol selection */
+#define PN_PROTO_TRANSPORT	0
+/* Phonet datagram socket */
+#define PN_PROTO_PHONET		1
+/* Phonet pipe */
+#define PN_PROTO_PIPE		2
+#define PHONET_NPROTO		3
+
+/* Socket options for SOL_PNPIPE level */
+#define PNPIPE_ENCAP		1
+#define PNPIPE_IFINDEX		2
+#define PNPIPE_HANDLE		3
+#define PNPIPE_INITSTATE	4
+
+#define PNADDR_ANY		0
+#define PNADDR_BROADCAST	0xFC
+#define PNPORT_RESOURCE_ROUTING	0
+
+/* Values for PNPIPE_ENCAP option */
+#define PNPIPE_ENCAP_NONE	0
+#define PNPIPE_ENCAP_IP		1
+
+/* ioctls */
+#define SIOCPNGETOBJECT		(SIOCPROTOPRIVATE + 0)
+#define SIOCPNENABLEPIPE	(SIOCPROTOPRIVATE + 13)
+#define SIOCPNADDRESOURCE	(SIOCPROTOPRIVATE + 14)
+#define SIOCPNDELRESOURCE	(SIOCPROTOPRIVATE + 15)
+
+/* Phonet protocol header */
+struct phonethdr {
+	__u8	pn_rdev;
+	__u8	pn_sdev;
+	__u8	pn_res;
+	__be16	pn_length;
+	__u8	pn_robj;
+	__u8	pn_sobj;
+} __attribute__((packed));
+
+/* Common Phonet payload header */
+struct phonetmsg {
+	__u8	pn_trans_id;	/* transaction ID */
+	__u8	pn_msg_id;	/* message type */
+	union {
+		struct {
+			__u8	pn_submsg_id;	/* message subtype */
+			__u8	pn_data[5];
+		} base;
+		struct {
+			__u16	pn_e_res_id;	/* extended resource ID */
+			__u8	pn_e_submsg_id;	/* message subtype */
+			__u8	pn_e_data[3];
+		} ext;
+	} pn_msg_u;
+};
+#define PN_COMMON_MESSAGE	0xF0
+#define PN_COMMGR		0x10
+#define PN_PREFIX		0xE0 /* resource for extended messages */
+#define pn_submsg_id		pn_msg_u.base.pn_submsg_id
+#define pn_e_submsg_id		pn_msg_u.ext.pn_e_submsg_id
+#define pn_e_res_id		pn_msg_u.ext.pn_e_res_id
+#define pn_data			pn_msg_u.base.pn_data
+#define pn_e_data		pn_msg_u.ext.pn_e_data
+
+/* data for unreachable errors */
+#define PN_COMM_SERVICE_NOT_IDENTIFIED_RESP	0x01
+#define PN_COMM_ISA_ENTITY_NOT_REACHABLE_RESP	0x14
+#define pn_orig_msg_id		pn_data[0]
+#define pn_status		pn_data[1]
+#define pn_e_orig_msg_id	pn_e_data[0]
+#define pn_e_status		pn_e_data[1]
+
+/* Phonet socket address structure */
+struct sockaddr_pn {
+	__kernel_sa_family_t spn_family;
+	__u8 spn_obj;
+	__u8 spn_dev;
+	__u8 spn_resource;
+	__u8 spn_zero[sizeof(struct sockaddr) - sizeof(__kernel_sa_family_t) - 3];
+} __attribute__((packed));
+
+/* Well known address */
+#define PN_DEV_PC	0x10
+
+static inline __u16 pn_object(__u8 addr, __u16 port)
+{
+	return (addr << 8) | (port & 0x3ff);
+}
+
+static inline __u8 pn_obj(__u16 handle)
+{
+	return handle & 0xff;
+}
+
+static inline __u8 pn_dev(__u16 handle)
+{
+	return handle >> 8;
+}
+
+static inline __u16 pn_port(__u16 handle)
+{
+	return handle & 0x3ff;
+}
+
+static inline __u8 pn_addr(__u16 handle)
+{
+	return (handle >> 8) & 0xfc;
+}
+
+static inline void pn_sockaddr_set_addr(struct sockaddr_pn *spn, __u8 addr)
+{
+	spn->spn_dev &= 0x03;
+	spn->spn_dev |= addr & 0xfc;
+}
+
+static inline void pn_sockaddr_set_port(struct sockaddr_pn *spn, __u16 port)
+{
+	spn->spn_dev &= 0xfc;
+	spn->spn_dev |= (port >> 8) & 0x03;
+	spn->spn_obj = port & 0xff;
+}
+
+static inline void pn_sockaddr_set_object(struct sockaddr_pn *spn,
+						__u16 handle)
+{
+	spn->spn_dev = pn_dev(handle);
+	spn->spn_obj = pn_obj(handle);
+}
+
+static inline void pn_sockaddr_set_resource(struct sockaddr_pn *spn,
+						__u8 resource)
+{
+	spn->spn_resource = resource;
+}
+
+static inline __u8 pn_sockaddr_get_addr(const struct sockaddr_pn *spn)
+{
+	return spn->spn_dev & 0xfc;
+}
+
+static inline __u16 pn_sockaddr_get_port(const struct sockaddr_pn *spn)
+{
+	return ((spn->spn_dev & 0x03) << 8) | spn->spn_obj;
+}
+
+static inline __u16 pn_sockaddr_get_object(const struct sockaddr_pn *spn)
+{
+	return pn_object(spn->spn_dev, spn->spn_obj);
+}
+
+static inline __u8 pn_sockaddr_get_resource(const struct sockaddr_pn *spn)
+{
+	return spn->spn_resource;
+}
+
+/* Phonet device ioctl requests */
+
+#endif /* _UAPILINUX_PHONET_H */
diff --git a/include/uapi/linux/pkt_cls.h b/include/uapi/linux/pkt_cls.h
new file mode 100644
index 00000000000..082eafaf026
--- /dev/null
+++ b/include/uapi/linux/pkt_cls.h
@@ -0,0 +1,469 @@
+#ifndef __LINUX_PKT_CLS_H
+#define __LINUX_PKT_CLS_H
+
+#include <linux/types.h>
+#include <linux/pkt_sched.h>
+
+/* I think i could have done better macros ; for now this is stolen from
+ * some arch/mips code - jhs
+*/
+#define _TC_MAKE32(x) ((x))
+
+#define _TC_MAKEMASK1(n) (_TC_MAKE32(1) << _TC_MAKE32(n))
+#define _TC_MAKEMASK(v,n) (_TC_MAKE32((_TC_MAKE32(1)<<(v))-1) << _TC_MAKE32(n))
+#define _TC_MAKEVALUE(v,n) (_TC_MAKE32(v) << _TC_MAKE32(n))
+#define _TC_GETVALUE(v,n,m) ((_TC_MAKE32(v) & _TC_MAKE32(m)) >> _TC_MAKE32(n))
+
+/* verdict bit breakdown 
+ *
+bit 0: when set -> this packet has been munged already
+
+bit 1: when set -> It is ok to munge this packet
+
+bit 2,3,4,5: Reclassify counter - sort of reverse TTL - if exceeded
+assume loop
+
+bit 6,7: Where this packet was last seen 
+0: Above the transmit example at the socket level
+1: on the Ingress
+2: on the Egress
+
+bit 8: when set --> Request not to classify on ingress. 
+
+bits 9,10,11: redirect counter -  redirect TTL. Loop avoidance
+
+ *
+ * */
+
+#define TC_MUNGED          _TC_MAKEMASK1(0)
+#define SET_TC_MUNGED(v)   ( TC_MUNGED | (v & ~TC_MUNGED))
+#define CLR_TC_MUNGED(v)   ( v & ~TC_MUNGED)
+
+#define TC_OK2MUNGE        _TC_MAKEMASK1(1)
+#define SET_TC_OK2MUNGE(v)   ( TC_OK2MUNGE | (v & ~TC_OK2MUNGE))
+#define CLR_TC_OK2MUNGE(v)   ( v & ~TC_OK2MUNGE)
+
+#define S_TC_VERD          _TC_MAKE32(2)
+#define M_TC_VERD          _TC_MAKEMASK(4,S_TC_VERD)
+#define G_TC_VERD(x)       _TC_GETVALUE(x,S_TC_VERD,M_TC_VERD)
+#define V_TC_VERD(x)       _TC_MAKEVALUE(x,S_TC_VERD)
+#define SET_TC_VERD(v,n)   ((V_TC_VERD(n)) | (v & ~M_TC_VERD))
+
+#define S_TC_FROM          _TC_MAKE32(6)
+#define M_TC_FROM          _TC_MAKEMASK(2,S_TC_FROM)
+#define G_TC_FROM(x)       _TC_GETVALUE(x,S_TC_FROM,M_TC_FROM)
+#define V_TC_FROM(x)       _TC_MAKEVALUE(x,S_TC_FROM)
+#define SET_TC_FROM(v,n)   ((V_TC_FROM(n)) | (v & ~M_TC_FROM))
+#define AT_STACK	0x0
+#define AT_INGRESS	0x1
+#define AT_EGRESS	0x2
+
+#define TC_NCLS          _TC_MAKEMASK1(8)
+#define SET_TC_NCLS(v)   ( TC_NCLS | (v & ~TC_NCLS))
+#define CLR_TC_NCLS(v)   ( v & ~TC_NCLS)
+
+#define S_TC_RTTL          _TC_MAKE32(9)
+#define M_TC_RTTL          _TC_MAKEMASK(3,S_TC_RTTL)
+#define G_TC_RTTL(x)       _TC_GETVALUE(x,S_TC_RTTL,M_TC_RTTL)
+#define V_TC_RTTL(x)       _TC_MAKEVALUE(x,S_TC_RTTL)
+#define SET_TC_RTTL(v,n)   ((V_TC_RTTL(n)) | (v & ~M_TC_RTTL))
+
+#define S_TC_AT          _TC_MAKE32(12)
+#define M_TC_AT          _TC_MAKEMASK(2,S_TC_AT)
+#define G_TC_AT(x)       _TC_GETVALUE(x,S_TC_AT,M_TC_AT)
+#define V_TC_AT(x)       _TC_MAKEVALUE(x,S_TC_AT)
+#define SET_TC_AT(v,n)   ((V_TC_AT(n)) | (v & ~M_TC_AT))
+
+/* Action attributes */
+enum {
+	TCA_ACT_UNSPEC,
+	TCA_ACT_KIND,
+	TCA_ACT_OPTIONS,
+	TCA_ACT_INDEX,
+	TCA_ACT_STATS,
+	__TCA_ACT_MAX
+};
+
+#define TCA_ACT_MAX __TCA_ACT_MAX
+#define TCA_OLD_COMPAT (TCA_ACT_MAX+1)
+#define TCA_ACT_MAX_PRIO 32
+#define TCA_ACT_BIND	1
+#define TCA_ACT_NOBIND	0
+#define TCA_ACT_UNBIND	1
+#define TCA_ACT_NOUNBIND	0
+#define TCA_ACT_REPLACE		1
+#define TCA_ACT_NOREPLACE	0
+#define MAX_REC_LOOP 4
+#define MAX_RED_LOOP 4
+
+#define TC_ACT_UNSPEC	(-1)
+#define TC_ACT_OK		0
+#define TC_ACT_RECLASSIFY	1
+#define TC_ACT_SHOT		2
+#define TC_ACT_PIPE		3
+#define TC_ACT_STOLEN		4
+#define TC_ACT_QUEUED		5
+#define TC_ACT_REPEAT		6
+#define TC_ACT_JUMP		0x10000000
+
+/* Action type identifiers*/
+enum {
+	TCA_ID_UNSPEC=0,
+	TCA_ID_POLICE=1,
+	/* other actions go here */
+	__TCA_ID_MAX=255
+};
+
+#define TCA_ID_MAX __TCA_ID_MAX
+
+struct tc_police {
+	__u32			index;
+	int			action;
+#define TC_POLICE_UNSPEC	TC_ACT_UNSPEC
+#define TC_POLICE_OK		TC_ACT_OK
+#define TC_POLICE_RECLASSIFY	TC_ACT_RECLASSIFY
+#define TC_POLICE_SHOT		TC_ACT_SHOT
+#define TC_POLICE_PIPE		TC_ACT_PIPE
+
+	__u32			limit;
+	__u32			burst;
+	__u32			mtu;
+	struct tc_ratespec	rate;
+	struct tc_ratespec	peakrate;
+	int 			refcnt;
+	int 			bindcnt;
+	__u32			capab;
+};
+
+struct tcf_t {
+	__u64   install;
+	__u64   lastuse;
+	__u64   expires;
+};
+
+struct tc_cnt {
+	int                   refcnt; 
+	int                   bindcnt;
+};
+
+#define tc_gen \
+	__u32                 index; \
+	__u32                 capab; \
+	int                   action; \
+	int                   refcnt; \
+	int                   bindcnt
+
+enum {
+	TCA_POLICE_UNSPEC,
+	TCA_POLICE_TBF,
+	TCA_POLICE_RATE,
+	TCA_POLICE_PEAKRATE,
+	TCA_POLICE_AVRATE,
+	TCA_POLICE_RESULT,
+	__TCA_POLICE_MAX
+#define TCA_POLICE_RESULT TCA_POLICE_RESULT
+};
+
+#define TCA_POLICE_MAX (__TCA_POLICE_MAX - 1)
+
+/* U32 filters */
+
+#define TC_U32_HTID(h) ((h)&0xFFF00000)
+#define TC_U32_USERHTID(h) (TC_U32_HTID(h)>>20)
+#define TC_U32_HASH(h) (((h)>>12)&0xFF)
+#define TC_U32_NODE(h) ((h)&0xFFF)
+#define TC_U32_KEY(h) ((h)&0xFFFFF)
+#define TC_U32_UNSPEC	0
+#define TC_U32_ROOT	(0xFFF00000)
+
+enum {
+	TCA_U32_UNSPEC,
+	TCA_U32_CLASSID,
+	TCA_U32_HASH,
+	TCA_U32_LINK,
+	TCA_U32_DIVISOR,
+	TCA_U32_SEL,
+	TCA_U32_POLICE,
+	TCA_U32_ACT,   
+	TCA_U32_INDEV,
+	TCA_U32_PCNT,
+	TCA_U32_MARK,
+	__TCA_U32_MAX
+};
+
+#define TCA_U32_MAX (__TCA_U32_MAX - 1)
+
+struct tc_u32_key {
+	__be32		mask;
+	__be32		val;
+	int		off;
+	int		offmask;
+};
+
+struct tc_u32_sel {
+	unsigned char		flags;
+	unsigned char		offshift;
+	unsigned char		nkeys;
+
+	__be16			offmask;
+	__u16			off;
+	short			offoff;
+
+	short			hoff;
+	__be32			hmask;
+	struct tc_u32_key	keys[0];
+};
+
+struct tc_u32_mark {
+	__u32		val;
+	__u32		mask;
+	__u32		success;
+};
+
+struct tc_u32_pcnt {
+	__u64 rcnt;
+	__u64 rhit;
+	__u64 kcnts[0];
+};
+
+/* Flags */
+
+#define TC_U32_TERMINAL		1
+#define TC_U32_OFFSET		2
+#define TC_U32_VAROFFSET	4
+#define TC_U32_EAT		8
+
+#define TC_U32_MAXDEPTH 8
+
+
+/* RSVP filter */
+
+enum {
+	TCA_RSVP_UNSPEC,
+	TCA_RSVP_CLASSID,
+	TCA_RSVP_DST,
+	TCA_RSVP_SRC,
+	TCA_RSVP_PINFO,
+	TCA_RSVP_POLICE,
+	TCA_RSVP_ACT,
+	__TCA_RSVP_MAX
+};
+
+#define TCA_RSVP_MAX (__TCA_RSVP_MAX - 1 )
+
+struct tc_rsvp_gpi {
+	__u32	key;
+	__u32	mask;
+	int	offset;
+};
+
+struct tc_rsvp_pinfo {
+	struct tc_rsvp_gpi dpi;
+	struct tc_rsvp_gpi spi;
+	__u8	protocol;
+	__u8	tunnelid;
+	__u8	tunnelhdr;
+	__u8	pad;
+};
+
+/* ROUTE filter */
+
+enum {
+	TCA_ROUTE4_UNSPEC,
+	TCA_ROUTE4_CLASSID,
+	TCA_ROUTE4_TO,
+	TCA_ROUTE4_FROM,
+	TCA_ROUTE4_IIF,
+	TCA_ROUTE4_POLICE,
+	TCA_ROUTE4_ACT,
+	__TCA_ROUTE4_MAX
+};
+
+#define TCA_ROUTE4_MAX (__TCA_ROUTE4_MAX - 1)
+
+
+/* FW filter */
+
+enum {
+	TCA_FW_UNSPEC,
+	TCA_FW_CLASSID,
+	TCA_FW_POLICE,
+	TCA_FW_INDEV, /*  used by CONFIG_NET_CLS_IND */
+	TCA_FW_ACT, /* used by CONFIG_NET_CLS_ACT */
+	TCA_FW_MASK,
+	__TCA_FW_MAX
+};
+
+#define TCA_FW_MAX (__TCA_FW_MAX - 1)
+
+/* TC index filter */
+
+enum {
+	TCA_TCINDEX_UNSPEC,
+	TCA_TCINDEX_HASH,
+	TCA_TCINDEX_MASK,
+	TCA_TCINDEX_SHIFT,
+	TCA_TCINDEX_FALL_THROUGH,
+	TCA_TCINDEX_CLASSID,
+	TCA_TCINDEX_POLICE,
+	TCA_TCINDEX_ACT,
+	__TCA_TCINDEX_MAX
+};
+
+#define TCA_TCINDEX_MAX     (__TCA_TCINDEX_MAX - 1)
+
+/* Flow filter */
+
+enum {
+	FLOW_KEY_SRC,
+	FLOW_KEY_DST,
+	FLOW_KEY_PROTO,
+	FLOW_KEY_PROTO_SRC,
+	FLOW_KEY_PROTO_DST,
+	FLOW_KEY_IIF,
+	FLOW_KEY_PRIORITY,
+	FLOW_KEY_MARK,
+	FLOW_KEY_NFCT,
+	FLOW_KEY_NFCT_SRC,
+	FLOW_KEY_NFCT_DST,
+	FLOW_KEY_NFCT_PROTO_SRC,
+	FLOW_KEY_NFCT_PROTO_DST,
+	FLOW_KEY_RTCLASSID,
+	FLOW_KEY_SKUID,
+	FLOW_KEY_SKGID,
+	FLOW_KEY_VLAN_TAG,
+	FLOW_KEY_RXHASH,
+	__FLOW_KEY_MAX,
+};
+
+#define FLOW_KEY_MAX	(__FLOW_KEY_MAX - 1)
+
+enum {
+	FLOW_MODE_MAP,
+	FLOW_MODE_HASH,
+};
+
+enum {
+	TCA_FLOW_UNSPEC,
+	TCA_FLOW_KEYS,
+	TCA_FLOW_MODE,
+	TCA_FLOW_BASECLASS,
+	TCA_FLOW_RSHIFT,
+	TCA_FLOW_ADDEND,
+	TCA_FLOW_MASK,
+	TCA_FLOW_XOR,
+	TCA_FLOW_DIVISOR,
+	TCA_FLOW_ACT,
+	TCA_FLOW_POLICE,
+	TCA_FLOW_EMATCHES,
+	TCA_FLOW_PERTURB,
+	__TCA_FLOW_MAX
+};
+
+#define TCA_FLOW_MAX	(__TCA_FLOW_MAX - 1)
+
+/* Basic filter */
+
+enum {
+	TCA_BASIC_UNSPEC,
+	TCA_BASIC_CLASSID,
+	TCA_BASIC_EMATCHES,
+	TCA_BASIC_ACT,
+	TCA_BASIC_POLICE,
+	__TCA_BASIC_MAX
+};
+
+#define TCA_BASIC_MAX (__TCA_BASIC_MAX - 1)
+
+
+/* Cgroup classifier */
+
+enum {
+	TCA_CGROUP_UNSPEC,
+	TCA_CGROUP_ACT,
+	TCA_CGROUP_POLICE,
+	TCA_CGROUP_EMATCHES,
+	__TCA_CGROUP_MAX,
+};
+
+#define TCA_CGROUP_MAX (__TCA_CGROUP_MAX - 1)
+
+/* Extended Matches */
+
+struct tcf_ematch_tree_hdr {
+	__u16		nmatches;
+	__u16		progid;
+};
+
+enum {
+	TCA_EMATCH_TREE_UNSPEC,
+	TCA_EMATCH_TREE_HDR,
+	TCA_EMATCH_TREE_LIST,
+	__TCA_EMATCH_TREE_MAX
+};
+#define TCA_EMATCH_TREE_MAX (__TCA_EMATCH_TREE_MAX - 1)
+
+struct tcf_ematch_hdr {
+	__u16		matchid;
+	__u16		kind;
+	__u16		flags;
+	__u16		pad; /* currently unused */
+};
+
+/*  0                   1
+ *  0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 
+ * +-----------------------+-+-+---+
+ * |         Unused        |S|I| R |
+ * +-----------------------+-+-+---+
+ *
+ * R(2) ::= relation to next ematch
+ *          where: 0 0 END (last ematch)
+ *                 0 1 AND
+ *                 1 0 OR
+ *                 1 1 Unused (invalid)
+ * I(1) ::= invert result
+ * S(1) ::= simple payload
+ */
+#define TCF_EM_REL_END	0
+#define TCF_EM_REL_AND	(1<<0)
+#define TCF_EM_REL_OR	(1<<1)
+#define TCF_EM_INVERT	(1<<2)
+#define TCF_EM_SIMPLE	(1<<3)
+
+#define TCF_EM_REL_MASK	3
+#define TCF_EM_REL_VALID(v) (((v) & TCF_EM_REL_MASK) != TCF_EM_REL_MASK)
+
+enum {
+	TCF_LAYER_LINK,
+	TCF_LAYER_NETWORK,
+	TCF_LAYER_TRANSPORT,
+	__TCF_LAYER_MAX
+};
+#define TCF_LAYER_MAX (__TCF_LAYER_MAX - 1)
+
+/* Ematch type assignments
+ *   1..32767		Reserved for ematches inside kernel tree
+ *   32768..65535	Free to use, not reliable
+ */
+#define	TCF_EM_CONTAINER	0
+#define	TCF_EM_CMP		1
+#define	TCF_EM_NBYTE		2
+#define	TCF_EM_U32		3
+#define	TCF_EM_META		4
+#define	TCF_EM_TEXT		5
+#define	TCF_EM_VLAN		6
+#define	TCF_EM_CANID		7
+#define	TCF_EM_IPSET		8
+#define	TCF_EM_MAX		8
+
+enum {
+	TCF_EM_PROG_TC
+};
+
+enum {
+	TCF_EM_OPND_EQ,
+	TCF_EM_OPND_GT,
+	TCF_EM_OPND_LT
+};
+
+#endif
diff --git a/include/uapi/linux/pkt_sched.h b/include/uapi/linux/pkt_sched.h
new file mode 100644
index 00000000000..32aef0a439e
--- /dev/null
+++ b/include/uapi/linux/pkt_sched.h
@@ -0,0 +1,738 @@
+#ifndef __LINUX_PKT_SCHED_H
+#define __LINUX_PKT_SCHED_H
+
+#include <linux/types.h>
+
+/* Logical priority bands not depending on specific packet scheduler.
+   Every scheduler will map them to real traffic classes, if it has
+   no more precise mechanism to classify packets.
+
+   These numbers have no special meaning, though their coincidence
+   with obsolete IPv6 values is not occasional :-). New IPv6 drafts
+   preferred full anarchy inspired by diffserv group.
+
+   Note: TC_PRIO_BESTEFFORT does not mean that it is the most unhappy
+   class, actually, as rule it will be handled with more care than
+   filler or even bulk.
+ */
+
+#define TC_PRIO_BESTEFFORT		0
+#define TC_PRIO_FILLER			1
+#define TC_PRIO_BULK			2
+#define TC_PRIO_INTERACTIVE_BULK	4
+#define TC_PRIO_INTERACTIVE		6
+#define TC_PRIO_CONTROL			7
+
+#define TC_PRIO_MAX			15
+
+/* Generic queue statistics, available for all the elements.
+   Particular schedulers may have also their private records.
+ */
+
+struct tc_stats {
+	__u64	bytes;			/* Number of enqueued bytes */
+	__u32	packets;		/* Number of enqueued packets	*/
+	__u32	drops;			/* Packets dropped because of lack of resources */
+	__u32	overlimits;		/* Number of throttle events when this
+					 * flow goes out of allocated bandwidth */
+	__u32	bps;			/* Current flow byte rate */
+	__u32	pps;			/* Current flow packet rate */
+	__u32	qlen;
+	__u32	backlog;
+};
+
+struct tc_estimator {
+	signed char	interval;
+	unsigned char	ewma_log;
+};
+
+/* "Handles"
+   ---------
+
+    All the traffic control objects have 32bit identifiers, or "handles".
+
+    They can be considered as opaque numbers from user API viewpoint,
+    but actually they always consist of two fields: major and
+    minor numbers, which are interpreted by kernel specially,
+    that may be used by applications, though not recommended.
+
+    F.e. qdisc handles always have minor number equal to zero,
+    classes (or flows) have major equal to parent qdisc major, and
+    minor uniquely identifying class inside qdisc.
+
+    Macros to manipulate handles:
+ */
+
+#define TC_H_MAJ_MASK (0xFFFF0000U)
+#define TC_H_MIN_MASK (0x0000FFFFU)
+#define TC_H_MAJ(h) ((h)&TC_H_MAJ_MASK)
+#define TC_H_MIN(h) ((h)&TC_H_MIN_MASK)
+#define TC_H_MAKE(maj,min) (((maj)&TC_H_MAJ_MASK)|((min)&TC_H_MIN_MASK))
+
+#define TC_H_UNSPEC	(0U)
+#define TC_H_ROOT	(0xFFFFFFFFU)
+#define TC_H_INGRESS    (0xFFFFFFF1U)
+
+struct tc_ratespec {
+	unsigned char	cell_log;
+	unsigned char	__reserved;
+	unsigned short	overhead;
+	short		cell_align;
+	unsigned short	mpu;
+	__u32		rate;
+};
+
+#define TC_RTAB_SIZE	1024
+
+struct tc_sizespec {
+	unsigned char	cell_log;
+	unsigned char	size_log;
+	short		cell_align;
+	int		overhead;
+	unsigned int	linklayer;
+	unsigned int	mpu;
+	unsigned int	mtu;
+	unsigned int	tsize;
+};
+
+enum {
+	TCA_STAB_UNSPEC,
+	TCA_STAB_BASE,
+	TCA_STAB_DATA,
+	__TCA_STAB_MAX
+};
+
+#define TCA_STAB_MAX (__TCA_STAB_MAX - 1)
+
+/* FIFO section */
+
+struct tc_fifo_qopt {
+	__u32	limit;	/* Queue length: bytes for bfifo, packets for pfifo */
+};
+
+/* PRIO section */
+
+#define TCQ_PRIO_BANDS	16
+#define TCQ_MIN_PRIO_BANDS 2
+
+struct tc_prio_qopt {
+	int	bands;			/* Number of bands */
+	__u8	priomap[TC_PRIO_MAX+1];	/* Map: logical priority -> PRIO band */
+};
+
+/* MULTIQ section */
+
+struct tc_multiq_qopt {
+	__u16	bands;			/* Number of bands */
+	__u16	max_bands;		/* Maximum number of queues */
+};
+
+/* PLUG section */
+
+#define TCQ_PLUG_BUFFER                0
+#define TCQ_PLUG_RELEASE_ONE           1
+#define TCQ_PLUG_RELEASE_INDEFINITE    2
+#define TCQ_PLUG_LIMIT                 3
+
+struct tc_plug_qopt {
+	/* TCQ_PLUG_BUFFER: Inset a plug into the queue and
+	 *  buffer any incoming packets
+	 * TCQ_PLUG_RELEASE_ONE: Dequeue packets from queue head
+	 *   to beginning of the next plug.
+	 * TCQ_PLUG_RELEASE_INDEFINITE: Dequeue all packets from queue.
+	 *   Stop buffering packets until the next TCQ_PLUG_BUFFER
+	 *   command is received (just act as a pass-thru queue).
+	 * TCQ_PLUG_LIMIT: Increase/decrease queue size
+	 */
+	int             action;
+	__u32           limit;
+};
+
+/* TBF section */
+
+struct tc_tbf_qopt {
+	struct tc_ratespec rate;
+	struct tc_ratespec peakrate;
+	__u32		limit;
+	__u32		buffer;
+	__u32		mtu;
+};
+
+enum {
+	TCA_TBF_UNSPEC,
+	TCA_TBF_PARMS,
+	TCA_TBF_RTAB,
+	TCA_TBF_PTAB,
+	__TCA_TBF_MAX,
+};
+
+#define TCA_TBF_MAX (__TCA_TBF_MAX - 1)
+
+
+/* TEQL section */
+
+/* TEQL does not require any parameters */
+
+/* SFQ section */
+
+struct tc_sfq_qopt {
+	unsigned	quantum;	/* Bytes per round allocated to flow */
+	int		perturb_period;	/* Period of hash perturbation */
+	__u32		limit;		/* Maximal packets in queue */
+	unsigned	divisor;	/* Hash divisor  */
+	unsigned	flows;		/* Maximal number of flows  */
+};
+
+struct tc_sfqred_stats {
+	__u32           prob_drop;      /* Early drops, below max threshold */
+	__u32           forced_drop;	/* Early drops, after max threshold */
+	__u32           prob_mark;      /* Marked packets, below max threshold */
+	__u32           forced_mark;    /* Marked packets, after max threshold */
+	__u32           prob_mark_head; /* Marked packets, below max threshold */
+	__u32           forced_mark_head;/* Marked packets, after max threshold */
+};
+
+struct tc_sfq_qopt_v1 {
+	struct tc_sfq_qopt v0;
+	unsigned int	depth;		/* max number of packets per flow */
+	unsigned int	headdrop;
+/* SFQRED parameters */
+	__u32		limit;		/* HARD maximal flow queue length (bytes) */
+	__u32		qth_min;	/* Min average length threshold (bytes) */
+	__u32		qth_max;	/* Max average length threshold (bytes) */
+	unsigned char   Wlog;		/* log(W)		*/
+	unsigned char   Plog;		/* log(P_max/(qth_max-qth_min))	*/
+	unsigned char   Scell_log;	/* cell size for idle damping */
+	unsigned char	flags;
+	__u32		max_P;		/* probability, high resolution */
+/* SFQRED stats */
+	struct tc_sfqred_stats stats;
+};
+
+
+struct tc_sfq_xstats {
+	__s32		allot;
+};
+
+/* RED section */
+
+enum {
+	TCA_RED_UNSPEC,
+	TCA_RED_PARMS,
+	TCA_RED_STAB,
+	TCA_RED_MAX_P,
+	__TCA_RED_MAX,
+};
+
+#define TCA_RED_MAX (__TCA_RED_MAX - 1)
+
+struct tc_red_qopt {
+	__u32		limit;		/* HARD maximal queue length (bytes)	*/
+	__u32		qth_min;	/* Min average length threshold (bytes) */
+	__u32		qth_max;	/* Max average length threshold (bytes) */
+	unsigned char   Wlog;		/* log(W)		*/
+	unsigned char   Plog;		/* log(P_max/(qth_max-qth_min))	*/
+	unsigned char   Scell_log;	/* cell size for idle damping */
+	unsigned char	flags;
+#define TC_RED_ECN		1
+#define TC_RED_HARDDROP		2
+#define TC_RED_ADAPTATIVE	4
+};
+
+struct tc_red_xstats {
+	__u32           early;          /* Early drops */
+	__u32           pdrop;          /* Drops due to queue limits */
+	__u32           other;          /* Drops due to drop() calls */
+	__u32           marked;         /* Marked packets */
+};
+
+/* GRED section */
+
+#define MAX_DPs 16
+
+enum {
+       TCA_GRED_UNSPEC,
+       TCA_GRED_PARMS,
+       TCA_GRED_STAB,
+       TCA_GRED_DPS,
+       TCA_GRED_MAX_P,
+	   __TCA_GRED_MAX,
+};
+
+#define TCA_GRED_MAX (__TCA_GRED_MAX - 1)
+
+struct tc_gred_qopt {
+	__u32		limit;        /* HARD maximal queue length (bytes)    */
+	__u32		qth_min;      /* Min average length threshold (bytes) */
+	__u32		qth_max;      /* Max average length threshold (bytes) */
+	__u32		DP;           /* up to 2^32 DPs */
+	__u32		backlog;
+	__u32		qave;
+	__u32		forced;
+	__u32		early;
+	__u32		other;
+	__u32		pdrop;
+	__u8		Wlog;         /* log(W)               */
+	__u8		Plog;         /* log(P_max/(qth_max-qth_min)) */
+	__u8		Scell_log;    /* cell size for idle damping */
+	__u8		prio;         /* prio of this VQ */
+	__u32		packets;
+	__u32		bytesin;
+};
+
+/* gred setup */
+struct tc_gred_sopt {
+	__u32		DPs;
+	__u32		def_DP;
+	__u8		grio;
+	__u8		flags;
+	__u16		pad1;
+};
+
+/* CHOKe section */
+
+enum {
+	TCA_CHOKE_UNSPEC,
+	TCA_CHOKE_PARMS,
+	TCA_CHOKE_STAB,
+	TCA_CHOKE_MAX_P,
+	__TCA_CHOKE_MAX,
+};
+
+#define TCA_CHOKE_MAX (__TCA_CHOKE_MAX - 1)
+
+struct tc_choke_qopt {
+	__u32		limit;		/* Hard queue length (packets)	*/
+	__u32		qth_min;	/* Min average threshold (packets) */
+	__u32		qth_max;	/* Max average threshold (packets) */
+	unsigned char   Wlog;		/* log(W)		*/
+	unsigned char   Plog;		/* log(P_max/(qth_max-qth_min))	*/
+	unsigned char   Scell_log;	/* cell size for idle damping */
+	unsigned char	flags;		/* see RED flags */
+};
+
+struct tc_choke_xstats {
+	__u32		early;          /* Early drops */
+	__u32		pdrop;          /* Drops due to queue limits */
+	__u32		other;          /* Drops due to drop() calls */
+	__u32		marked;         /* Marked packets */
+	__u32		matched;	/* Drops due to flow match */
+};
+
+/* HTB section */
+#define TC_HTB_NUMPRIO		8
+#define TC_HTB_MAXDEPTH		8
+#define TC_HTB_PROTOVER		3 /* the same as HTB and TC's major */
+
+struct tc_htb_opt {
+	struct tc_ratespec 	rate;
+	struct tc_ratespec 	ceil;
+	__u32	buffer;
+	__u32	cbuffer;
+	__u32	quantum;
+	__u32	level;		/* out only */
+	__u32	prio;
+};
+struct tc_htb_glob {
+	__u32 version;		/* to match HTB/TC */
+    	__u32 rate2quantum;	/* bps->quantum divisor */
+    	__u32 defcls;		/* default class number */
+	__u32 debug;		/* debug flags */
+
+	/* stats */
+	__u32 direct_pkts; /* count of non shaped packets */
+};
+enum {
+	TCA_HTB_UNSPEC,
+	TCA_HTB_PARMS,
+	TCA_HTB_INIT,
+	TCA_HTB_CTAB,
+	TCA_HTB_RTAB,
+	__TCA_HTB_MAX,
+};
+
+#define TCA_HTB_MAX (__TCA_HTB_MAX - 1)
+
+struct tc_htb_xstats {
+	__u32 lends;
+	__u32 borrows;
+	__u32 giants;	/* too big packets (rate will not be accurate) */
+	__u32 tokens;
+	__u32 ctokens;
+};
+
+/* HFSC section */
+
+struct tc_hfsc_qopt {
+	__u16	defcls;		/* default class */
+};
+
+struct tc_service_curve {
+	__u32	m1;		/* slope of the first segment in bps */
+	__u32	d;		/* x-projection of the first segment in us */
+	__u32	m2;		/* slope of the second segment in bps */
+};
+
+struct tc_hfsc_stats {
+	__u64	work;		/* total work done */
+	__u64	rtwork;		/* work done by real-time criteria */
+	__u32	period;		/* current period */
+	__u32	level;		/* class level in hierarchy */
+};
+
+enum {
+	TCA_HFSC_UNSPEC,
+	TCA_HFSC_RSC,
+	TCA_HFSC_FSC,
+	TCA_HFSC_USC,
+	__TCA_HFSC_MAX,
+};
+
+#define TCA_HFSC_MAX (__TCA_HFSC_MAX - 1)
+
+
+/* CBQ section */
+
+#define TC_CBQ_MAXPRIO		8
+#define TC_CBQ_MAXLEVEL		8
+#define TC_CBQ_DEF_EWMA		5
+
+struct tc_cbq_lssopt {
+	unsigned char	change;
+	unsigned char	flags;
+#define TCF_CBQ_LSS_BOUNDED	1
+#define TCF_CBQ_LSS_ISOLATED	2
+	unsigned char  	ewma_log;
+	unsigned char  	level;
+#define TCF_CBQ_LSS_FLAGS	1
+#define TCF_CBQ_LSS_EWMA	2
+#define TCF_CBQ_LSS_MAXIDLE	4
+#define TCF_CBQ_LSS_MINIDLE	8
+#define TCF_CBQ_LSS_OFFTIME	0x10
+#define TCF_CBQ_LSS_AVPKT	0x20
+	__u32		maxidle;
+	__u32		minidle;
+	__u32		offtime;
+	__u32		avpkt;
+};
+
+struct tc_cbq_wrropt {
+	unsigned char	flags;
+	unsigned char	priority;
+	unsigned char	cpriority;
+	unsigned char	__reserved;
+	__u32		allot;
+	__u32		weight;
+};
+
+struct tc_cbq_ovl {
+	unsigned char	strategy;
+#define	TC_CBQ_OVL_CLASSIC	0
+#define	TC_CBQ_OVL_DELAY	1
+#define	TC_CBQ_OVL_LOWPRIO	2
+#define	TC_CBQ_OVL_DROP		3
+#define	TC_CBQ_OVL_RCLASSIC	4
+	unsigned char	priority2;
+	__u16		pad;
+	__u32		penalty;
+};
+
+struct tc_cbq_police {
+	unsigned char	police;
+	unsigned char	__res1;
+	unsigned short	__res2;
+};
+
+struct tc_cbq_fopt {
+	__u32		split;
+	__u32		defmap;
+	__u32		defchange;
+};
+
+struct tc_cbq_xstats {
+	__u32		borrows;
+	__u32		overactions;
+	__s32		avgidle;
+	__s32		undertime;
+};
+
+enum {
+	TCA_CBQ_UNSPEC,
+	TCA_CBQ_LSSOPT,
+	TCA_CBQ_WRROPT,
+	TCA_CBQ_FOPT,
+	TCA_CBQ_OVL_STRATEGY,
+	TCA_CBQ_RATE,
+	TCA_CBQ_RTAB,
+	TCA_CBQ_POLICE,
+	__TCA_CBQ_MAX,
+};
+
+#define TCA_CBQ_MAX	(__TCA_CBQ_MAX - 1)
+
+/* dsmark section */
+
+enum {
+	TCA_DSMARK_UNSPEC,
+	TCA_DSMARK_INDICES,
+	TCA_DSMARK_DEFAULT_INDEX,
+	TCA_DSMARK_SET_TC_INDEX,
+	TCA_DSMARK_MASK,
+	TCA_DSMARK_VALUE,
+	__TCA_DSMARK_MAX,
+};
+
+#define TCA_DSMARK_MAX (__TCA_DSMARK_MAX - 1)
+
+/* ATM  section */
+
+enum {
+	TCA_ATM_UNSPEC,
+	TCA_ATM_FD,		/* file/socket descriptor */
+	TCA_ATM_PTR,		/* pointer to descriptor - later */
+	TCA_ATM_HDR,		/* LL header */
+	TCA_ATM_EXCESS,		/* excess traffic class (0 for CLP)  */
+	TCA_ATM_ADDR,		/* PVC address (for output only) */
+	TCA_ATM_STATE,		/* VC state (ATM_VS_*; for output only) */
+	__TCA_ATM_MAX,
+};
+
+#define TCA_ATM_MAX	(__TCA_ATM_MAX - 1)
+
+/* Network emulator */
+
+enum {
+	TCA_NETEM_UNSPEC,
+	TCA_NETEM_CORR,
+	TCA_NETEM_DELAY_DIST,
+	TCA_NETEM_REORDER,
+	TCA_NETEM_CORRUPT,
+	TCA_NETEM_LOSS,
+	TCA_NETEM_RATE,
+	TCA_NETEM_ECN,
+	__TCA_NETEM_MAX,
+};
+
+#define TCA_NETEM_MAX (__TCA_NETEM_MAX - 1)
+
+struct tc_netem_qopt {
+	__u32	latency;	/* added delay (us) */
+	__u32   limit;		/* fifo limit (packets) */
+	__u32	loss;		/* random packet loss (0=none ~0=100%) */
+	__u32	gap;		/* re-ordering gap (0 for none) */
+	__u32   duplicate;	/* random packet dup  (0=none ~0=100%) */
+	__u32	jitter;		/* random jitter in latency (us) */
+};
+
+struct tc_netem_corr {
+	__u32	delay_corr;	/* delay correlation */
+	__u32	loss_corr;	/* packet loss correlation */
+	__u32	dup_corr;	/* duplicate correlation  */
+};
+
+struct tc_netem_reorder {
+	__u32	probability;
+	__u32	correlation;
+};
+
+struct tc_netem_corrupt {
+	__u32	probability;
+	__u32	correlation;
+};
+
+struct tc_netem_rate {
+	__u32	rate;	/* byte/s */
+	__s32	packet_overhead;
+	__u32	cell_size;
+	__s32	cell_overhead;
+};
+
+enum {
+	NETEM_LOSS_UNSPEC,
+	NETEM_LOSS_GI,		/* General Intuitive - 4 state model */
+	NETEM_LOSS_GE,		/* Gilbert Elliot models */
+	__NETEM_LOSS_MAX
+};
+#define NETEM_LOSS_MAX (__NETEM_LOSS_MAX - 1)
+
+/* State transition probabilities for 4 state model */
+struct tc_netem_gimodel {
+	__u32	p13;
+	__u32	p31;
+	__u32	p32;
+	__u32	p14;
+	__u32	p23;
+};
+
+/* Gilbert-Elliot models */
+struct tc_netem_gemodel {
+	__u32 p;
+	__u32 r;
+	__u32 h;
+	__u32 k1;
+};
+
+#define NETEM_DIST_SCALE	8192
+#define NETEM_DIST_MAX		16384
+
+/* DRR */
+
+enum {
+	TCA_DRR_UNSPEC,
+	TCA_DRR_QUANTUM,
+	__TCA_DRR_MAX
+};
+
+#define TCA_DRR_MAX	(__TCA_DRR_MAX - 1)
+
+struct tc_drr_stats {
+	__u32	deficit;
+};
+
+/* MQPRIO */
+#define TC_QOPT_BITMASK 15
+#define TC_QOPT_MAX_QUEUE 16
+
+struct tc_mqprio_qopt {
+	__u8	num_tc;
+	__u8	prio_tc_map[TC_QOPT_BITMASK + 1];
+	__u8	hw;
+	__u16	count[TC_QOPT_MAX_QUEUE];
+	__u16	offset[TC_QOPT_MAX_QUEUE];
+};
+
+/* SFB */
+
+enum {
+	TCA_SFB_UNSPEC,
+	TCA_SFB_PARMS,
+	__TCA_SFB_MAX,
+};
+
+#define TCA_SFB_MAX (__TCA_SFB_MAX - 1)
+
+/*
+ * Note: increment, decrement are Q0.16 fixed-point values.
+ */
+struct tc_sfb_qopt {
+	__u32 rehash_interval;	/* delay between hash move, in ms */
+	__u32 warmup_time;	/* double buffering warmup time in ms (warmup_time < rehash_interval) */
+	__u32 max;		/* max len of qlen_min */
+	__u32 bin_size;		/* maximum queue length per bin */
+	__u32 increment;	/* probability increment, (d1 in Blue) */
+	__u32 decrement;	/* probability decrement, (d2 in Blue) */
+	__u32 limit;		/* max SFB queue length */
+	__u32 penalty_rate;	/* inelastic flows are rate limited to 'rate' pps */
+	__u32 penalty_burst;
+};
+
+struct tc_sfb_xstats {
+	__u32 earlydrop;
+	__u32 penaltydrop;
+	__u32 bucketdrop;
+	__u32 queuedrop;
+	__u32 childdrop; /* drops in child qdisc */
+	__u32 marked;
+	__u32 maxqlen;
+	__u32 maxprob;
+	__u32 avgprob;
+};
+
+#define SFB_MAX_PROB 0xFFFF
+
+/* QFQ */
+enum {
+	TCA_QFQ_UNSPEC,
+	TCA_QFQ_WEIGHT,
+	TCA_QFQ_LMAX,
+	__TCA_QFQ_MAX
+};
+
+#define TCA_QFQ_MAX	(__TCA_QFQ_MAX - 1)
+
+struct tc_qfq_stats {
+	__u32 weight;
+	__u32 lmax;
+};
+
+/* CODEL */
+
+enum {
+	TCA_CODEL_UNSPEC,
+	TCA_CODEL_TARGET,
+	TCA_CODEL_LIMIT,
+	TCA_CODEL_INTERVAL,
+	TCA_CODEL_ECN,
+	__TCA_CODEL_MAX
+};
+
+#define TCA_CODEL_MAX	(__TCA_CODEL_MAX - 1)
+
+struct tc_codel_xstats {
+	__u32	maxpacket; /* largest packet we've seen so far */
+	__u32	count;	   /* how many drops we've done since the last time we
+			    * entered dropping state
+			    */
+	__u32	lastcount; /* count at entry to dropping state */
+	__u32	ldelay;    /* in-queue delay seen by most recently dequeued packet */
+	__s32	drop_next; /* time to drop next packet */
+	__u32	drop_overlimit; /* number of time max qdisc packet limit was hit */
+	__u32	ecn_mark;  /* number of packets we ECN marked instead of dropped */
+	__u32	dropping;  /* are we in dropping state ? */
+};
+
+/* FQ_CODEL */
+
+enum {
+	TCA_FQ_CODEL_UNSPEC,
+	TCA_FQ_CODEL_TARGET,
+	TCA_FQ_CODEL_LIMIT,
+	TCA_FQ_CODEL_INTERVAL,
+	TCA_FQ_CODEL_ECN,
+	TCA_FQ_CODEL_FLOWS,
+	TCA_FQ_CODEL_QUANTUM,
+	__TCA_FQ_CODEL_MAX
+};
+
+#define TCA_FQ_CODEL_MAX	(__TCA_FQ_CODEL_MAX - 1)
+
+enum {
+	TCA_FQ_CODEL_XSTATS_QDISC,
+	TCA_FQ_CODEL_XSTATS_CLASS,
+};
+
+struct tc_fq_codel_qd_stats {
+	__u32	maxpacket;	/* largest packet we've seen so far */
+	__u32	drop_overlimit; /* number of time max qdisc
+				 * packet limit was hit
+				 */
+	__u32	ecn_mark;	/* number of packets we ECN marked
+				 * instead of being dropped
+				 */
+	__u32	new_flow_count; /* number of time packets
+				 * created a 'new flow'
+				 */
+	__u32	new_flows_len;	/* count of flows in new list */
+	__u32	old_flows_len;	/* count of flows in old list */
+};
+
+struct tc_fq_codel_cl_stats {
+	__s32	deficit;
+	__u32	ldelay;		/* in-queue delay seen by most recently
+				 * dequeued packet
+				 */
+	__u32	count;
+	__u32	lastcount;
+	__u32	dropping;
+	__s32	drop_next;
+};
+
+struct tc_fq_codel_xstats {
+	__u32	type;
+	union {
+		struct tc_fq_codel_qd_stats qdisc_stats;
+		struct tc_fq_codel_cl_stats class_stats;
+	};
+};
+
+#endif
diff --git a/include/uapi/linux/pktcdvd.h b/include/uapi/linux/pktcdvd.h
new file mode 100644
index 00000000000..2640b9d4e24
--- /dev/null
+++ b/include/uapi/linux/pktcdvd.h
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) 2000 Jens Axboe <axboe@suse.de>
+ * Copyright (C) 2001-2004 Peter Osterlund <petero2@telia.com>
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * Packet writing layer for ATAPI and SCSI CD-R, CD-RW, DVD-R, and
+ * DVD-RW devices.
+ *
+ */
+#ifndef _UAPI__PKTCDVD_H
+#define _UAPI__PKTCDVD_H
+
+#include <linux/types.h>
+
+/*
+ * 1 for normal debug messages, 2 is very verbose. 0 to turn it off.
+ */
+#define PACKET_DEBUG		1
+
+#define	MAX_WRITERS		8
+
+#define PKT_RB_POOL_SIZE	512
+
+/*
+ * How long we should hold a non-full packet before starting data gathering.
+ */
+#define PACKET_WAIT_TIME	(HZ * 5 / 1000)
+
+/*
+ * use drive write caching -- we need deferred error handling to be
+ * able to successfully recover with this option (drive will return good
+ * status as soon as the cdb is validated).
+ */
+#if defined(CONFIG_CDROM_PKTCDVD_WCACHE)
+#define USE_WCACHING		1
+#else
+#define USE_WCACHING		0
+#endif
+
+/*
+ * No user-servicable parts beyond this point ->
+ */
+
+/*
+ * device types
+ */
+#define PACKET_CDR		1
+#define	PACKET_CDRW		2
+#define PACKET_DVDR		3
+#define PACKET_DVDRW		4
+
+/*
+ * flags
+ */
+#define PACKET_WRITABLE		1	/* pd is writable */
+#define PACKET_NWA_VALID	2	/* next writable address valid */
+#define PACKET_LRA_VALID	3	/* last recorded address valid */
+#define PACKET_MERGE_SEGS	4	/* perform segment merging to keep */
+					/* underlying cdrom device happy */
+
+/*
+ * Disc status -- from READ_DISC_INFO
+ */
+#define PACKET_DISC_EMPTY	0
+#define PACKET_DISC_INCOMPLETE	1
+#define PACKET_DISC_COMPLETE	2
+#define PACKET_DISC_OTHER	3
+
+/*
+ * write type, and corresponding data block type
+ */
+#define PACKET_MODE1		1
+#define PACKET_MODE2		2
+#define PACKET_BLOCK_MODE1	8
+#define PACKET_BLOCK_MODE2	10
+
+/*
+ * Last session/border status
+ */
+#define PACKET_SESSION_EMPTY		0
+#define PACKET_SESSION_INCOMPLETE	1
+#define PACKET_SESSION_RESERVED		2
+#define PACKET_SESSION_COMPLETE		3
+
+#define PACKET_MCN			"4a656e734178626f65323030300000"
+
+#undef PACKET_USE_LS
+
+#define PKT_CTRL_CMD_SETUP	0
+#define PKT_CTRL_CMD_TEARDOWN	1
+#define PKT_CTRL_CMD_STATUS	2
+
+struct pkt_ctrl_command {
+	__u32 command;				/* in: Setup, teardown, status */
+	__u32 dev_index;			/* in/out: Device index */
+	__u32 dev;				/* in/out: Device nr for cdrw device */
+	__u32 pkt_dev;				/* in/out: Device nr for packet device */
+	__u32 num_devices;			/* out: Largest device index + 1 */
+	__u32 padding;				/* Not used */
+};
+
+/*
+ * packet ioctls
+ */
+#define PACKET_IOCTL_MAGIC	('X')
+#define PACKET_CTRL_CMD		_IOWR(PACKET_IOCTL_MAGIC, 1, struct pkt_ctrl_command)
+
+
+#endif /* _UAPI__PKTCDVD_H */
diff --git a/include/uapi/linux/pmu.h b/include/uapi/linux/pmu.h
new file mode 100644
index 00000000000..caead364b6e
--- /dev/null
+++ b/include/uapi/linux/pmu.h
@@ -0,0 +1,139 @@
+/*
+ * Definitions for talking to the PMU.  The PMU is a microcontroller
+ * which controls battery charging and system power on PowerBook 3400
+ * and 2400 models as well as the RTC and various other things.
+ *
+ * Copyright (C) 1998 Paul Mackerras.
+ */
+
+#ifndef _UAPI_LINUX_PMU_H
+#define _UAPI_LINUX_PMU_H
+
+#define PMU_DRIVER_VERSION	2
+
+/*
+ * PMU commands
+ */
+#define PMU_POWER_CTRL0		0x10	/* control power of some devices */
+#define PMU_POWER_CTRL		0x11	/* control power of some devices */
+#define PMU_ADB_CMD		0x20	/* send ADB packet */
+#define PMU_ADB_POLL_OFF	0x21	/* disable ADB auto-poll */
+#define PMU_WRITE_NVRAM		0x33	/* write non-volatile RAM */
+#define PMU_READ_NVRAM		0x3b	/* read non-volatile RAM */
+#define PMU_SET_RTC		0x30	/* set real-time clock */
+#define PMU_READ_RTC		0x38	/* read real-time clock */
+#define PMU_SET_VOLBUTTON	0x40	/* set volume up/down position */
+#define PMU_BACKLIGHT_BRIGHT	0x41	/* set backlight brightness */
+#define PMU_GET_VOLBUTTON	0x48	/* get volume up/down position */
+#define PMU_PCEJECT		0x4c	/* eject PC-card from slot */
+#define PMU_BATTERY_STATE	0x6b	/* report battery state etc. */
+#define PMU_SMART_BATTERY_STATE	0x6f	/* report battery state (new way) */
+#define PMU_SET_INTR_MASK	0x70	/* set PMU interrupt mask */
+#define PMU_INT_ACK		0x78	/* read interrupt bits */
+#define PMU_SHUTDOWN		0x7e	/* turn power off */
+#define PMU_CPU_SPEED		0x7d	/* control CPU speed on some models */
+#define PMU_SLEEP		0x7f	/* put CPU to sleep */
+#define PMU_POWER_EVENTS	0x8f	/* Send power-event commands to PMU */
+#define PMU_I2C_CMD		0x9a	/* I2C operations */
+#define PMU_RESET		0xd0	/* reset CPU */
+#define PMU_GET_BRIGHTBUTTON	0xd9	/* report brightness up/down pos */
+#define PMU_GET_COVER		0xdc	/* report cover open/closed */
+#define PMU_SYSTEM_READY	0xdf	/* tell PMU we are awake */
+#define PMU_GET_VERSION		0xea	/* read the PMU version */
+
+/* Bits to use with the PMU_POWER_CTRL0 command */
+#define PMU_POW0_ON		0x80	/* OR this to power ON the device */
+#define PMU_POW0_OFF		0x00	/* leave bit 7 to 0 to power it OFF */
+#define PMU_POW0_HARD_DRIVE	0x04	/* Hard drive power (on wallstreet/lombard ?) */
+
+/* Bits to use with the PMU_POWER_CTRL command */
+#define PMU_POW_ON		0x80	/* OR this to power ON the device */
+#define PMU_POW_OFF		0x00	/* leave bit 7 to 0 to power it OFF */
+#define PMU_POW_BACKLIGHT	0x01	/* backlight power */
+#define PMU_POW_CHARGER		0x02	/* battery charger power */
+#define PMU_POW_IRLED		0x04	/* IR led power (on wallstreet) */
+#define PMU_POW_MEDIABAY	0x08	/* media bay power (wallstreet/lombard ?) */
+
+/* Bits in PMU interrupt and interrupt mask bytes */
+#define PMU_INT_PCEJECT		0x04	/* PC-card eject buttons */
+#define PMU_INT_SNDBRT		0x08	/* sound/brightness up/down buttons */
+#define PMU_INT_ADB		0x10	/* ADB autopoll or reply data */
+#define PMU_INT_BATTERY		0x20	/* Battery state change */
+#define PMU_INT_ENVIRONMENT	0x40	/* Environment interrupts */
+#define PMU_INT_TICK		0x80	/* 1-second tick interrupt */
+
+/* Other bits in PMU interrupt valid when PMU_INT_ADB is set */
+#define PMU_INT_ADB_AUTO	0x04	/* ADB autopoll, when PMU_INT_ADB */
+#define PMU_INT_WAITING_CHARGER	0x01	/* ??? */
+#define PMU_INT_AUTO_SRQ_POLL	0x02	/* ??? */
+
+/* Bits in the environement message (either obtained via PMU_GET_COVER,
+ * or via PMU_INT_ENVIRONMENT on core99 */
+#define PMU_ENV_LID_CLOSED	0x01	/* The lid is closed */
+
+/* I2C related definitions */
+#define PMU_I2C_MODE_SIMPLE	0
+#define PMU_I2C_MODE_STDSUB	1
+#define PMU_I2C_MODE_COMBINED	2
+
+#define PMU_I2C_BUS_STATUS	0
+#define PMU_I2C_BUS_SYSCLK	1
+#define PMU_I2C_BUS_POWER	2
+
+#define PMU_I2C_STATUS_OK	0
+#define PMU_I2C_STATUS_DATAREAD	1
+#define PMU_I2C_STATUS_BUSY	0xfe
+
+
+/* Kind of PMU (model) */
+enum {
+	PMU_UNKNOWN,
+	PMU_OHARE_BASED,	/* 2400, 3400, 3500 (old G3 powerbook) */
+	PMU_HEATHROW_BASED,	/* PowerBook G3 series */
+	PMU_PADDINGTON_BASED,	/* 1999 PowerBook G3 */
+	PMU_KEYLARGO_BASED,	/* Core99 motherboard (PMU99) */
+	PMU_68K_V1,		/* 68K PMU, version 1 */
+	PMU_68K_V2, 		/* 68K PMU, version 2 */
+};
+
+/* PMU PMU_POWER_EVENTS commands */
+enum {
+	PMU_PWR_GET_POWERUP_EVENTS	= 0x00,
+	PMU_PWR_SET_POWERUP_EVENTS	= 0x01,
+	PMU_PWR_CLR_POWERUP_EVENTS	= 0x02,
+	PMU_PWR_GET_WAKEUP_EVENTS	= 0x03,
+	PMU_PWR_SET_WAKEUP_EVENTS	= 0x04,
+	PMU_PWR_CLR_WAKEUP_EVENTS	= 0x05,
+};
+
+/* Power events wakeup bits */
+enum {
+	PMU_PWR_WAKEUP_KEY		= 0x01,	/* Wake on key press */
+	PMU_PWR_WAKEUP_AC_INSERT	= 0x02, /* Wake on AC adapter plug */
+	PMU_PWR_WAKEUP_AC_CHANGE	= 0x04,
+	PMU_PWR_WAKEUP_LID_OPEN		= 0x08,
+	PMU_PWR_WAKEUP_RING		= 0x10,
+};
+	
+/*
+ * Ioctl commands for the /dev/pmu device
+ */
+#include <linux/ioctl.h>
+
+/* no param */
+#define PMU_IOC_SLEEP		_IO('B', 0)
+/* out param: u32*	backlight value: 0 to 15 */
+#define PMU_IOC_GET_BACKLIGHT	_IOR('B', 1, size_t)
+/* in param: u32	backlight value: 0 to 15 */
+#define PMU_IOC_SET_BACKLIGHT	_IOW('B', 2, size_t)
+/* out param: u32*	PMU model */
+#define PMU_IOC_GET_MODEL	_IOR('B', 3, size_t)
+/* out param: u32*	has_adb: 0 or 1 */
+#define PMU_IOC_HAS_ADB		_IOR('B', 4, size_t) 
+/* out param: u32*	can_sleep: 0 or 1 */
+#define PMU_IOC_CAN_SLEEP	_IOR('B', 5, size_t) 
+/* no param, but historically was _IOR('B', 6, 0), meaning 4 bytes */
+#define PMU_IOC_GRAB_BACKLIGHT	_IOR('B', 6, size_t) 
+
+
+#endif /* _UAPI_LINUX_PMU_H */
diff --git a/include/uapi/linux/poll.h b/include/uapi/linux/poll.h
new file mode 100644
index 00000000000..2001fedfb22
--- /dev/null
+++ b/include/uapi/linux/poll.h
@@ -0,0 +1 @@
+#include <asm/poll.h>
diff --git a/include/uapi/linux/posix_types.h b/include/uapi/linux/posix_types.h
new file mode 100644
index 00000000000..988f76e636e
--- /dev/null
+++ b/include/uapi/linux/posix_types.h
@@ -0,0 +1,37 @@
+#ifndef _LINUX_POSIX_TYPES_H
+#define _LINUX_POSIX_TYPES_H
+
+#include <linux/stddef.h>
+
+/*
+ * This allows for 1024 file descriptors: if NR_OPEN is ever grown
+ * beyond that you'll have to change this too. But 1024 fd's seem to be
+ * enough even for such "real" unices like OSF/1, so hopefully this is
+ * one limit that doesn't have to be changed [again].
+ *
+ * Note that POSIX wants the FD_CLEAR(fd,fdsetp) defines to be in
+ * <sys/time.h> (and thus <linux/time.h>) - but this is a more logical
+ * place for them. Solved by having dummy defines in <sys/time.h>.
+ */
+
+/*
+ * This macro may have been defined in <gnu/types.h>. But we always
+ * use the one here.
+ */
+#undef __FD_SETSIZE
+#define __FD_SETSIZE	1024
+
+typedef struct {
+	unsigned long fds_bits[__FD_SETSIZE / (8 * sizeof(long))];
+} __kernel_fd_set;
+
+/* Type of a signal handler.  */
+typedef void (*__kernel_sighandler_t)(int);
+
+/* Type of a SYSV IPC key.  */
+typedef int __kernel_key_t;
+typedef int __kernel_mqd_t;
+
+#include <asm/posix_types.h>
+
+#endif /* _LINUX_POSIX_TYPES_H */
diff --git a/include/uapi/linux/ppdev.h b/include/uapi/linux/ppdev.h
new file mode 100644
index 00000000000..dc18c5d23eb
--- /dev/null
+++ b/include/uapi/linux/ppdev.h
@@ -0,0 +1,99 @@
+/*
+ * linux/include/linux/ppdev.h
+ *
+ * User-space parallel port device driver (header file).
+ *
+ * Copyright (C) 1998-9 Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Added PPGETTIME/PPSETTIME, Fred Barnes, 1999
+ * Added PPGETMODES/PPGETMODE/PPGETPHASE, Fred Barnes <frmb2@ukc.ac.uk>, 03/01/2001
+ */
+
+#define PP_IOCTL	'p'
+
+/* Set mode for read/write (e.g. IEEE1284_MODE_EPP) */
+#define PPSETMODE	_IOW(PP_IOCTL, 0x80, int)
+
+/* Read status */
+#define PPRSTATUS	_IOR(PP_IOCTL, 0x81, unsigned char)
+#define PPWSTATUS	OBSOLETE__IOW(PP_IOCTL, 0x82, unsigned char)
+
+/* Read/write control */
+#define PPRCONTROL	_IOR(PP_IOCTL, 0x83, unsigned char)
+#define PPWCONTROL	_IOW(PP_IOCTL, 0x84, unsigned char)
+
+struct ppdev_frob_struct {
+	unsigned char mask;
+	unsigned char val;
+};
+#define PPFCONTROL      _IOW(PP_IOCTL, 0x8e, struct ppdev_frob_struct)
+
+/* Read/write data */
+#define PPRDATA		_IOR(PP_IOCTL, 0x85, unsigned char)
+#define PPWDATA		_IOW(PP_IOCTL, 0x86, unsigned char)
+
+/* Read/write econtrol (not used) */
+#define PPRECONTROL	OBSOLETE__IOR(PP_IOCTL, 0x87, unsigned char)
+#define PPWECONTROL	OBSOLETE__IOW(PP_IOCTL, 0x88, unsigned char)
+
+/* Read/write FIFO (not used) */
+#define PPRFIFO		OBSOLETE__IOR(PP_IOCTL, 0x89, unsigned char)
+#define PPWFIFO		OBSOLETE__IOW(PP_IOCTL, 0x8a, unsigned char)
+
+/* Claim the port to start using it */
+#define PPCLAIM		_IO(PP_IOCTL, 0x8b)
+
+/* Release the port when you aren't using it */
+#define PPRELEASE	_IO(PP_IOCTL, 0x8c)
+
+/* Yield the port (release it if another driver is waiting,
+ * then reclaim) */
+#define PPYIELD		_IO(PP_IOCTL, 0x8d)
+
+/* Register device exclusively (must be before PPCLAIM). */
+#define PPEXCL		_IO(PP_IOCTL, 0x8f)
+
+/* Data line direction: non-zero for input mode. */
+#define PPDATADIR	_IOW(PP_IOCTL, 0x90, int)
+
+/* Negotiate a particular IEEE 1284 mode. */
+#define PPNEGOT		_IOW(PP_IOCTL, 0x91, int)
+
+/* Set control lines when an interrupt occurs. */
+#define PPWCTLONIRQ	_IOW(PP_IOCTL, 0x92, unsigned char)
+
+/* Clear (and return) interrupt count. */
+#define PPCLRIRQ	_IOR(PP_IOCTL, 0x93, int)
+
+/* Set the IEEE 1284 phase that we're in (e.g. IEEE1284_PH_FWD_IDLE) */
+#define PPSETPHASE	_IOW(PP_IOCTL, 0x94, int)
+
+/* Set and get port timeout (struct timeval's) */
+#define PPGETTIME	_IOR(PP_IOCTL, 0x95, struct timeval)
+#define PPSETTIME	_IOW(PP_IOCTL, 0x96, struct timeval)
+
+/* Get available modes (what the hardware can do) */
+#define PPGETMODES	_IOR(PP_IOCTL, 0x97, unsigned int)
+
+/* Get the current mode and phaze */
+#define PPGETMODE	_IOR(PP_IOCTL, 0x98, int)
+#define PPGETPHASE	_IOR(PP_IOCTL, 0x99, int)
+
+/* get/set flags */
+#define PPGETFLAGS	_IOR(PP_IOCTL, 0x9a, int)
+#define PPSETFLAGS	_IOW(PP_IOCTL, 0x9b, int)
+
+/* flags visible to the world */
+#define PP_FASTWRITE	(1<<2)
+#define PP_FASTREAD	(1<<3)
+#define PP_W91284PIC	(1<<4)
+
+/* only masks user-visible flags */
+#define PP_FLAGMASK	(PP_FASTWRITE | PP_FASTREAD | PP_W91284PIC)
+
+
diff --git a/include/uapi/linux/ppp-comp.h b/include/uapi/linux/ppp-comp.h
new file mode 100644
index 00000000000..0a15bbb04e1
--- /dev/null
+++ b/include/uapi/linux/ppp-comp.h
@@ -0,0 +1,93 @@
+/*
+ * ppp-comp.h - Definitions for doing PPP packet compression.
+ *
+ * Copyright 1994-1998 Paul Mackerras.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ */
+#ifndef _UAPI_NET_PPP_COMP_H
+#define _UAPI_NET_PPP_COMP_H
+
+
+/*
+ * CCP codes.
+ */
+
+#define CCP_CONFREQ	1
+#define CCP_CONFACK	2
+#define CCP_TERMREQ	5
+#define CCP_TERMACK	6
+#define CCP_RESETREQ	14
+#define CCP_RESETACK	15
+
+/*
+ * Max # bytes for a CCP option
+ */
+
+#define CCP_MAX_OPTION_LENGTH	32
+
+/*
+ * Parts of a CCP packet.
+ */
+
+#define CCP_CODE(dp)		((dp)[0])
+#define CCP_ID(dp)		((dp)[1])
+#define CCP_LENGTH(dp)		(((dp)[2] << 8) + (dp)[3])
+#define CCP_HDRLEN		4
+
+#define CCP_OPT_CODE(dp)	((dp)[0])
+#define CCP_OPT_LENGTH(dp)	((dp)[1])
+#define CCP_OPT_MINLEN		2
+
+/*
+ * Definitions for BSD-Compress.
+ */
+
+#define CI_BSD_COMPRESS		21	/* config. option for BSD-Compress */
+#define CILEN_BSD_COMPRESS	3	/* length of config. option */
+
+/* Macros for handling the 3rd byte of the BSD-Compress config option. */
+#define BSD_NBITS(x)		((x) & 0x1F)	/* number of bits requested */
+#define BSD_VERSION(x)		((x) >> 5)	/* version of option format */
+#define BSD_CURRENT_VERSION	1		/* current version number */
+#define BSD_MAKE_OPT(v, n)	(((v) << 5) | (n))
+
+#define BSD_MIN_BITS		9	/* smallest code size supported */
+#define BSD_MAX_BITS		15	/* largest code size supported */
+
+/*
+ * Definitions for Deflate.
+ */
+
+#define CI_DEFLATE		26	/* config option for Deflate */
+#define CI_DEFLATE_DRAFT	24	/* value used in original draft RFC */
+#define CILEN_DEFLATE		4	/* length of its config option */
+
+#define DEFLATE_MIN_SIZE	9
+#define DEFLATE_MAX_SIZE	15
+#define DEFLATE_METHOD_VAL	8
+#define DEFLATE_SIZE(x)		(((x) >> 4) + 8)
+#define DEFLATE_METHOD(x)	((x) & 0x0F)
+#define DEFLATE_MAKE_OPT(w)	((((w) - 8) << 4) + DEFLATE_METHOD_VAL)
+#define DEFLATE_CHK_SEQUENCE	0
+
+/*
+ * Definitions for MPPE.
+ */
+
+#define CI_MPPE                18      /* config option for MPPE */
+#define CILEN_MPPE              6      /* length of config option */
+
+/*
+ * Definitions for other, as yet unsupported, compression methods.
+ */
+
+#define CI_PREDICTOR_1		1	/* config option for Predictor-1 */
+#define CILEN_PREDICTOR_1	2	/* length of its config option */
+#define CI_PREDICTOR_2		2	/* config option for Predictor-2 */
+#define CILEN_PREDICTOR_2	2	/* length of its config option */
+
+
+#endif /* _UAPI_NET_PPP_COMP_H */
diff --git a/include/uapi/linux/ppp-ioctl.h b/include/uapi/linux/ppp-ioctl.h
new file mode 100644
index 00000000000..2d9a8859550
--- /dev/null
+++ b/include/uapi/linux/ppp-ioctl.h
@@ -0,0 +1,119 @@
+/*
+ * ppp-ioctl.h - PPP ioctl definitions.
+ *
+ * Copyright 1999-2002 Paul Mackerras.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ */
+#ifndef _PPP_IOCTL_H
+#define _PPP_IOCTL_H
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+
+/*
+ * Bit definitions for flags argument to PPPIOCGFLAGS/PPPIOCSFLAGS.
+ */
+#define SC_COMP_PROT	0x00000001	/* protocol compression (output) */
+#define SC_COMP_AC	0x00000002	/* header compression (output) */
+#define	SC_COMP_TCP	0x00000004	/* TCP (VJ) compression (output) */
+#define SC_NO_TCP_CCID	0x00000008	/* disable VJ connection-id comp. */
+#define SC_REJ_COMP_AC	0x00000010	/* reject adrs/ctrl comp. on input */
+#define SC_REJ_COMP_TCP	0x00000020	/* reject TCP (VJ) comp. on input */
+#define SC_CCP_OPEN	0x00000040	/* Look at CCP packets */
+#define SC_CCP_UP	0x00000080	/* May send/recv compressed packets */
+#define SC_ENABLE_IP	0x00000100	/* IP packets may be exchanged */
+#define SC_LOOP_TRAFFIC	0x00000200	/* send traffic to pppd */
+#define SC_MULTILINK	0x00000400	/* do multilink encapsulation */
+#define SC_MP_SHORTSEQ	0x00000800	/* use short MP sequence numbers */
+#define SC_COMP_RUN	0x00001000	/* compressor has been inited */
+#define SC_DECOMP_RUN	0x00002000	/* decompressor has been inited */
+#define SC_MP_XSHORTSEQ	0x00004000	/* transmit short MP seq numbers */
+#define SC_DEBUG	0x00010000	/* enable debug messages */
+#define SC_LOG_INPKT	0x00020000	/* log contents of good pkts recvd */
+#define SC_LOG_OUTPKT	0x00040000	/* log contents of pkts sent */
+#define SC_LOG_RAWIN	0x00080000	/* log all chars received */
+#define SC_LOG_FLUSH	0x00100000	/* log all chars flushed */
+#define	SC_SYNC		0x00200000	/* synchronous serial mode */
+#define	SC_MUST_COMP    0x00400000	/* no uncompressed packets may be sent or received */
+#define	SC_MASK		0x0f600fff	/* bits that user can change */
+
+/* state bits */
+#define SC_XMIT_BUSY	0x10000000	/* (used by isdn_ppp?) */
+#define SC_RCV_ODDP	0x08000000	/* have rcvd char with odd parity */
+#define SC_RCV_EVNP	0x04000000	/* have rcvd char with even parity */
+#define SC_RCV_B7_1	0x02000000	/* have rcvd char with bit 7 = 1 */
+#define SC_RCV_B7_0	0x01000000	/* have rcvd char with bit 7 = 0 */
+#define SC_DC_FERROR	0x00800000	/* fatal decomp error detected */
+#define SC_DC_ERROR	0x00400000	/* non-fatal decomp error detected */
+
+/* Used with PPPIOCGNPMODE/PPPIOCSNPMODE */
+struct npioctl {
+	int		protocol;	/* PPP protocol, e.g. PPP_IP */
+	enum NPmode	mode;
+};
+
+/* Structure describing a CCP configuration option, for PPPIOCSCOMPRESS */
+struct ppp_option_data {
+	__u8	__user *ptr;
+	__u32	length;
+	int	transmit;
+};
+
+/* For PPPIOCGL2TPSTATS */
+struct pppol2tp_ioc_stats {
+	__u16		tunnel_id;	/* redundant */
+	__u16		session_id;	/* if zero, get tunnel stats */
+	__u32		using_ipsec:1;	/* valid only for session_id == 0 */
+	__aligned_u64	tx_packets;
+	__aligned_u64	tx_bytes;
+	__aligned_u64	tx_errors;
+	__aligned_u64	rx_packets;
+	__aligned_u64	rx_bytes;
+	__aligned_u64	rx_seq_discards;
+	__aligned_u64	rx_oos_packets;
+	__aligned_u64	rx_errors;
+};
+
+/*
+ * Ioctl definitions.
+ */
+
+#define	PPPIOCGFLAGS	_IOR('t', 90, int)	/* get configuration flags */
+#define	PPPIOCSFLAGS	_IOW('t', 89, int)	/* set configuration flags */
+#define	PPPIOCGASYNCMAP	_IOR('t', 88, int)	/* get async map */
+#define	PPPIOCSASYNCMAP	_IOW('t', 87, int)	/* set async map */
+#define	PPPIOCGUNIT	_IOR('t', 86, int)	/* get ppp unit number */
+#define	PPPIOCGRASYNCMAP _IOR('t', 85, int)	/* get receive async map */
+#define	PPPIOCSRASYNCMAP _IOW('t', 84, int)	/* set receive async map */
+#define	PPPIOCGMRU	_IOR('t', 83, int)	/* get max receive unit */
+#define	PPPIOCSMRU	_IOW('t', 82, int)	/* set max receive unit */
+#define	PPPIOCSMAXCID	_IOW('t', 81, int)	/* set VJ max slot ID */
+#define PPPIOCGXASYNCMAP _IOR('t', 80, ext_accm) /* get extended ACCM */
+#define PPPIOCSXASYNCMAP _IOW('t', 79, ext_accm) /* set extended ACCM */
+#define PPPIOCXFERUNIT	_IO('t', 78)		/* transfer PPP unit */
+#define PPPIOCSCOMPRESS	_IOW('t', 77, struct ppp_option_data)
+#define PPPIOCGNPMODE	_IOWR('t', 76, struct npioctl) /* get NP mode */
+#define PPPIOCSNPMODE	_IOW('t', 75, struct npioctl)  /* set NP mode */
+#define PPPIOCSPASS	_IOW('t', 71, struct sock_fprog) /* set pass filter */
+#define PPPIOCSACTIVE	_IOW('t', 70, struct sock_fprog) /* set active filt */
+#define PPPIOCGDEBUG	_IOR('t', 65, int)	/* Read debug level */
+#define PPPIOCSDEBUG	_IOW('t', 64, int)	/* Set debug level */
+#define PPPIOCGIDLE	_IOR('t', 63, struct ppp_idle) /* get idle time */
+#define PPPIOCNEWUNIT	_IOWR('t', 62, int)	/* create new ppp unit */
+#define PPPIOCATTACH	_IOW('t', 61, int)	/* attach to ppp unit */
+#define PPPIOCDETACH	_IOW('t', 60, int)	/* detach from ppp unit/chan */
+#define PPPIOCSMRRU	_IOW('t', 59, int)	/* set multilink MRU */
+#define PPPIOCCONNECT	_IOW('t', 58, int)	/* connect channel to unit */
+#define PPPIOCDISCONN	_IO('t', 57)		/* disconnect channel */
+#define PPPIOCATTCHAN	_IOW('t', 56, int)	/* attach to ppp channel */
+#define PPPIOCGCHAN	_IOR('t', 55, int)	/* get ppp channel number */
+#define PPPIOCGL2TPSTATS _IOR('t', 54, struct pppol2tp_ioc_stats)
+
+#define SIOCGPPPSTATS   (SIOCDEVPRIVATE + 0)
+#define SIOCGPPPVER     (SIOCDEVPRIVATE + 1)	/* NEVER change this!! */
+#define SIOCGPPPCSTATS  (SIOCDEVPRIVATE + 2)
+
+#endif /* _PPP_IOCTL_H */
diff --git a/include/uapi/linux/ppp_defs.h b/include/uapi/linux/ppp_defs.h
new file mode 100644
index 00000000000..283fc05dbbd
--- /dev/null
+++ b/include/uapi/linux/ppp_defs.h
@@ -0,0 +1,150 @@
+/*
+ * ppp_defs.h - PPP definitions.
+ *
+ * Copyright 1994-2000 Paul Mackerras.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ */
+#include <linux/types.h>
+
+#ifndef _UAPI_PPP_DEFS_H_
+#define _UAPI_PPP_DEFS_H_
+
+/*
+ * The basic PPP frame.
+ */
+#define PPP_HDRLEN	4	/* octets for standard ppp header */
+#define PPP_FCSLEN	2	/* octets for FCS */
+#define PPP_MRU		1500	/* default MRU = max length of info field */
+
+#define PPP_ADDRESS(p)	(((__u8 *)(p))[0])
+#define PPP_CONTROL(p)	(((__u8 *)(p))[1])
+#define PPP_PROTOCOL(p)	((((__u8 *)(p))[2] << 8) + ((__u8 *)(p))[3])
+
+/*
+ * Significant octet values.
+ */
+#define	PPP_ALLSTATIONS	0xff	/* All-Stations broadcast address */
+#define	PPP_UI		0x03	/* Unnumbered Information */
+#define	PPP_FLAG	0x7e	/* Flag Sequence */
+#define	PPP_ESCAPE	0x7d	/* Asynchronous Control Escape */
+#define	PPP_TRANS	0x20	/* Asynchronous transparency modifier */
+
+/*
+ * Protocol field values.
+ */
+#define PPP_IP		0x21	/* Internet Protocol */
+#define PPP_AT		0x29	/* AppleTalk Protocol */
+#define PPP_IPX		0x2b	/* IPX protocol */
+#define	PPP_VJC_COMP	0x2d	/* VJ compressed TCP */
+#define	PPP_VJC_UNCOMP	0x2f	/* VJ uncompressed TCP */
+#define PPP_MP		0x3d	/* Multilink protocol */
+#define PPP_IPV6	0x57	/* Internet Protocol Version 6 */
+#define PPP_COMPFRAG	0xfb	/* fragment compressed below bundle */
+#define PPP_COMP	0xfd	/* compressed packet */
+#define PPP_MPLS_UC	0x0281	/* Multi Protocol Label Switching - Unicast */
+#define PPP_MPLS_MC	0x0283	/* Multi Protocol Label Switching - Multicast */
+#define PPP_IPCP	0x8021	/* IP Control Protocol */
+#define PPP_ATCP	0x8029	/* AppleTalk Control Protocol */
+#define PPP_IPXCP	0x802b	/* IPX Control Protocol */
+#define PPP_IPV6CP	0x8057	/* IPv6 Control Protocol */
+#define PPP_CCPFRAG	0x80fb	/* CCP at link level (below MP bundle) */
+#define PPP_CCP		0x80fd	/* Compression Control Protocol */
+#define PPP_MPLSCP	0x80fd	/* MPLS Control Protocol */
+#define PPP_LCP		0xc021	/* Link Control Protocol */
+#define PPP_PAP		0xc023	/* Password Authentication Protocol */
+#define PPP_LQR		0xc025	/* Link Quality Report protocol */
+#define PPP_CHAP	0xc223	/* Cryptographic Handshake Auth. Protocol */
+#define PPP_CBCP	0xc029	/* Callback Control Protocol */
+
+/*
+ * Values for FCS calculations.
+ */
+
+#define PPP_INITFCS	0xffff	/* Initial FCS value */
+#define PPP_GOODFCS	0xf0b8	/* Good final FCS value */
+
+
+/*
+ * Extended asyncmap - allows any character to be escaped.
+ */
+
+typedef __u32		ext_accm[8];
+
+/*
+ * What to do with network protocol (NP) packets.
+ */
+enum NPmode {
+    NPMODE_PASS,		/* pass the packet through */
+    NPMODE_DROP,		/* silently drop the packet */
+    NPMODE_ERROR,		/* return an error */
+    NPMODE_QUEUE		/* save it up for later. */
+};
+
+/*
+ * Statistics for LQRP and pppstats
+ */
+struct pppstat	{
+    __u32	ppp_discards;	/* # frames discarded */
+
+    __u32	ppp_ibytes;	/* bytes received */
+    __u32	ppp_ioctects;	/* bytes received not in error */
+    __u32	ppp_ipackets;	/* packets received */
+    __u32	ppp_ierrors;	/* receive errors */
+    __u32	ppp_ilqrs;	/* # LQR frames received */
+
+    __u32	ppp_obytes;	/* raw bytes sent */
+    __u32	ppp_ooctects;	/* frame bytes sent */
+    __u32	ppp_opackets;	/* packets sent */
+    __u32	ppp_oerrors;	/* transmit errors */ 
+    __u32	ppp_olqrs;	/* # LQR frames sent */
+};
+
+struct vjstat {
+    __u32	vjs_packets;	/* outbound packets */
+    __u32	vjs_compressed;	/* outbound compressed packets */
+    __u32	vjs_searches;	/* searches for connection state */
+    __u32	vjs_misses;	/* times couldn't find conn. state */
+    __u32	vjs_uncompressedin; /* inbound uncompressed packets */
+    __u32	vjs_compressedin;   /* inbound compressed packets */
+    __u32	vjs_errorin;	/* inbound unknown type packets */
+    __u32	vjs_tossed;	/* inbound packets tossed because of error */
+};
+
+struct compstat {
+    __u32	unc_bytes;	/* total uncompressed bytes */
+    __u32	unc_packets;	/* total uncompressed packets */
+    __u32	comp_bytes;	/* compressed bytes */
+    __u32	comp_packets;	/* compressed packets */
+    __u32	inc_bytes;	/* incompressible bytes */
+    __u32	inc_packets;	/* incompressible packets */
+
+    /* the compression ratio is defined as in_count / bytes_out */
+    __u32       in_count;	/* Bytes received */
+    __u32       bytes_out;	/* Bytes transmitted */
+
+    double	ratio;		/* not computed in kernel. */
+};
+
+struct ppp_stats {
+    struct pppstat	p;	/* basic PPP statistics */
+    struct vjstat	vj;	/* VJ header compression statistics */
+};
+
+struct ppp_comp_stats {
+    struct compstat	c;	/* packet compression statistics */
+    struct compstat	d;	/* packet decompression statistics */
+};
+
+/*
+ * The following structure records the time in seconds since
+ * the last NP packet was sent or received.
+ */
+struct ppp_idle {
+    __kernel_time_t xmit_idle;	/* time since last NP packet sent */
+    __kernel_time_t recv_idle;	/* time since last NP packet received */
+};
+
+#endif /* _UAPI_PPP_DEFS_H_ */
diff --git a/include/uapi/linux/pps.h b/include/uapi/linux/pps.h
new file mode 100644
index 00000000000..a9bb1d93451
--- /dev/null
+++ b/include/uapi/linux/pps.h
@@ -0,0 +1,131 @@
+/*
+ * PPS API header
+ *
+ * Copyright (C) 2005-2009   Rodolfo Giometti <giometti@linux.it>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#ifndef _PPS_H_
+#define _PPS_H_
+
+#include <linux/types.h>
+
+#define PPS_VERSION		"5.3.6"
+#define PPS_MAX_SOURCES		16		/* should be enough... */
+
+/* Implementation note: the logical states ``assert'' and ``clear''
+ * are implemented in terms of the chip register, i.e. ``assert''
+ * means the bit is set.  */
+
+/*
+ * 3.2 New data structures
+ */
+
+#define PPS_API_VERS_1		1
+#define PPS_API_VERS		PPS_API_VERS_1	/* we use API version 1 */
+#define PPS_MAX_NAME_LEN	32
+
+/* 32-bit vs. 64-bit compatibility.
+ *
+ * 0n i386, the alignment of a uint64_t is only 4 bytes, while on most other
+ * architectures it's 8 bytes. On i386, there will be no padding between the
+ * two consecutive 'struct pps_ktime' members of struct pps_kinfo and struct
+ * pps_kparams. But on most platforms there will be padding to ensure correct
+ * alignment.
+ *
+ * The simple fix is probably to add an explicit padding.
+ *					 		[David Woodhouse]
+ */
+struct pps_ktime {
+	__s64 sec;
+	__s32 nsec;
+	__u32 flags;
+};
+#define PPS_TIME_INVALID	(1<<0)	/* used to specify timeout==NULL */
+
+struct pps_kinfo {
+	__u32 assert_sequence;		/* seq. num. of assert event */
+	__u32 clear_sequence; 		/* seq. num. of clear event */
+	struct pps_ktime assert_tu;	/* time of assert event */
+	struct pps_ktime clear_tu;	/* time of clear event */
+	int current_mode;		/* current mode bits */
+};
+
+struct pps_kparams {
+	int api_version;		/* API version # */
+	int mode;			/* mode bits */
+	struct pps_ktime assert_off_tu;	/* offset compensation for assert */
+	struct pps_ktime clear_off_tu;	/* offset compensation for clear */
+};
+
+/*
+ * 3.3 Mode bit definitions
+ */
+
+/* Device/implementation parameters */
+#define PPS_CAPTUREASSERT	0x01	/* capture assert events */
+#define PPS_CAPTURECLEAR	0x02	/* capture clear events */
+#define PPS_CAPTUREBOTH		0x03	/* capture assert and clear events */
+
+#define PPS_OFFSETASSERT	0x10	/* apply compensation for assert ev. */
+#define PPS_OFFSETCLEAR		0x20	/* apply compensation for clear ev. */
+
+#define PPS_CANWAIT		0x100	/* can we wait for an event? */
+#define PPS_CANPOLL		0x200	/* bit reserved for future use */
+
+/* Kernel actions */
+#define PPS_ECHOASSERT		0x40	/* feed back assert event to output */
+#define PPS_ECHOCLEAR		0x80	/* feed back clear event to output */
+
+/* Timestamp formats */
+#define PPS_TSFMT_TSPEC		0x1000	/* select timespec format */
+#define PPS_TSFMT_NTPFP		0x2000	/* select NTP format */
+
+/*
+ * 3.4.4 New functions: disciplining the kernel timebase
+ */
+
+/* Kernel consumers */
+#define PPS_KC_HARDPPS		0	/* hardpps() (or equivalent) */
+#define PPS_KC_HARDPPS_PLL	1	/* hardpps() constrained to
+					   use a phase-locked loop */
+#define PPS_KC_HARDPPS_FLL	2	/* hardpps() constrained to
+					   use a frequency-locked loop */
+/*
+ * Here begins the implementation-specific part!
+ */
+
+struct pps_fdata {
+	struct pps_kinfo info;
+	struct pps_ktime timeout;
+};
+
+struct pps_bind_args {
+	int tsformat;	/* format of time stamps */
+	int edge;	/* selected event type */
+	int consumer;	/* selected kernel consumer */
+};
+
+#include <linux/ioctl.h>
+
+#define PPS_GETPARAMS		_IOR('p', 0xa1, struct pps_kparams *)
+#define PPS_SETPARAMS		_IOW('p', 0xa2, struct pps_kparams *)
+#define PPS_GETCAP		_IOR('p', 0xa3, int *)
+#define PPS_FETCH		_IOWR('p', 0xa4, struct pps_fdata *)
+#define PPS_KC_BIND		_IOW('p', 0xa5, struct pps_bind_args *)
+
+#endif /* _PPS_H_ */
diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h
new file mode 100644
index 00000000000..289760f424a
--- /dev/null
+++ b/include/uapi/linux/prctl.h
@@ -0,0 +1,152 @@
+#ifndef _LINUX_PRCTL_H
+#define _LINUX_PRCTL_H
+
+/* Values to pass as first argument to prctl() */
+
+#define PR_SET_PDEATHSIG  1  /* Second arg is a signal */
+#define PR_GET_PDEATHSIG  2  /* Second arg is a ptr to return the signal */
+
+/* Get/set current->mm->dumpable */
+#define PR_GET_DUMPABLE   3
+#define PR_SET_DUMPABLE   4
+
+/* Get/set unaligned access control bits (if meaningful) */
+#define PR_GET_UNALIGN	  5
+#define PR_SET_UNALIGN	  6
+# define PR_UNALIGN_NOPRINT	1	/* silently fix up unaligned user accesses */
+# define PR_UNALIGN_SIGBUS	2	/* generate SIGBUS on unaligned user access */
+
+/* Get/set whether or not to drop capabilities on setuid() away from
+ * uid 0 (as per security/commoncap.c) */
+#define PR_GET_KEEPCAPS   7
+#define PR_SET_KEEPCAPS   8
+
+/* Get/set floating-point emulation control bits (if meaningful) */
+#define PR_GET_FPEMU  9
+#define PR_SET_FPEMU 10
+# define PR_FPEMU_NOPRINT	1	/* silently emulate fp operations accesses */
+# define PR_FPEMU_SIGFPE	2	/* don't emulate fp operations, send SIGFPE instead */
+
+/* Get/set floating-point exception mode (if meaningful) */
+#define PR_GET_FPEXC	11
+#define PR_SET_FPEXC	12
+# define PR_FP_EXC_SW_ENABLE	0x80	/* Use FPEXC for FP exception enables */
+# define PR_FP_EXC_DIV		0x010000	/* floating point divide by zero */
+# define PR_FP_EXC_OVF		0x020000	/* floating point overflow */
+# define PR_FP_EXC_UND		0x040000	/* floating point underflow */
+# define PR_FP_EXC_RES		0x080000	/* floating point inexact result */
+# define PR_FP_EXC_INV		0x100000	/* floating point invalid operation */
+# define PR_FP_EXC_DISABLED	0	/* FP exceptions disabled */
+# define PR_FP_EXC_NONRECOV	1	/* async non-recoverable exc. mode */
+# define PR_FP_EXC_ASYNC	2	/* async recoverable exception mode */
+# define PR_FP_EXC_PRECISE	3	/* precise exception mode */
+
+/* Get/set whether we use statistical process timing or accurate timestamp
+ * based process timing */
+#define PR_GET_TIMING   13
+#define PR_SET_TIMING   14
+# define PR_TIMING_STATISTICAL  0       /* Normal, traditional,
+                                                   statistical process timing */
+# define PR_TIMING_TIMESTAMP    1       /* Accurate timestamp based
+                                                   process timing */
+
+#define PR_SET_NAME    15		/* Set process name */
+#define PR_GET_NAME    16		/* Get process name */
+
+/* Get/set process endian */
+#define PR_GET_ENDIAN	19
+#define PR_SET_ENDIAN	20
+# define PR_ENDIAN_BIG		0
+# define PR_ENDIAN_LITTLE	1	/* True little endian mode */
+# define PR_ENDIAN_PPC_LITTLE	2	/* "PowerPC" pseudo little endian */
+
+/* Get/set process seccomp mode */
+#define PR_GET_SECCOMP	21
+#define PR_SET_SECCOMP	22
+
+/* Get/set the capability bounding set (as per security/commoncap.c) */
+#define PR_CAPBSET_READ 23
+#define PR_CAPBSET_DROP 24
+
+/* Get/set the process' ability to use the timestamp counter instruction */
+#define PR_GET_TSC 25
+#define PR_SET_TSC 26
+# define PR_TSC_ENABLE		1	/* allow the use of the timestamp counter */
+# define PR_TSC_SIGSEGV		2	/* throw a SIGSEGV instead of reading the TSC */
+
+/* Get/set securebits (as per security/commoncap.c) */
+#define PR_GET_SECUREBITS 27
+#define PR_SET_SECUREBITS 28
+
+/*
+ * Get/set the timerslack as used by poll/select/nanosleep
+ * A value of 0 means "use default"
+ */
+#define PR_SET_TIMERSLACK 29
+#define PR_GET_TIMERSLACK 30
+
+#define PR_TASK_PERF_EVENTS_DISABLE		31
+#define PR_TASK_PERF_EVENTS_ENABLE		32
+
+/*
+ * Set early/late kill mode for hwpoison memory corruption.
+ * This influences when the process gets killed on a memory corruption.
+ */
+#define PR_MCE_KILL	33
+# define PR_MCE_KILL_CLEAR   0
+# define PR_MCE_KILL_SET     1
+
+# define PR_MCE_KILL_LATE    0
+# define PR_MCE_KILL_EARLY   1
+# define PR_MCE_KILL_DEFAULT 2
+
+#define PR_MCE_KILL_GET 34
+
+/*
+ * Tune up process memory map specifics.
+ */
+#define PR_SET_MM		35
+# define PR_SET_MM_START_CODE		1
+# define PR_SET_MM_END_CODE		2
+# define PR_SET_MM_START_DATA		3
+# define PR_SET_MM_END_DATA		4
+# define PR_SET_MM_START_STACK		5
+# define PR_SET_MM_START_BRK		6
+# define PR_SET_MM_BRK			7
+# define PR_SET_MM_ARG_START		8
+# define PR_SET_MM_ARG_END		9
+# define PR_SET_MM_ENV_START		10
+# define PR_SET_MM_ENV_END		11
+# define PR_SET_MM_AUXV			12
+# define PR_SET_MM_EXE_FILE		13
+
+/*
+ * Set specific pid that is allowed to ptrace the current task.
+ * A value of 0 mean "no process".
+ */
+#define PR_SET_PTRACER 0x59616d61
+# define PR_SET_PTRACER_ANY ((unsigned long)-1)
+
+#define PR_SET_CHILD_SUBREAPER	36
+#define PR_GET_CHILD_SUBREAPER	37
+
+/*
+ * If no_new_privs is set, then operations that grant new privileges (i.e.
+ * execve) will either fail or not grant them.  This affects suid/sgid,
+ * file capabilities, and LSMs.
+ *
+ * Operations that merely manipulate or drop existing privileges (setresuid,
+ * capset, etc.) will still work.  Drop those privileges if you want them gone.
+ *
+ * Changing LSM security domain is considered a new privilege.  So, for example,
+ * asking selinux for a specific new context (e.g. with runcon) will result
+ * in execve returning -EPERM.
+ *
+ * See Documentation/prctl/no_new_privs.txt for more details.
+ */
+#define PR_SET_NO_NEW_PRIVS	38
+#define PR_GET_NO_NEW_PRIVS	39
+
+#define PR_GET_TID_ADDRESS	40
+
+#endif /* _LINUX_PRCTL_H */
diff --git a/include/uapi/linux/ptp_clock.h b/include/uapi/linux/ptp_clock.h
new file mode 100644
index 00000000000..94e981f810a
--- /dev/null
+++ b/include/uapi/linux/ptp_clock.h
@@ -0,0 +1,84 @@
+/*
+ * PTP 1588 clock support - user space interface
+ *
+ * Copyright (C) 2010 OMICRON electronics GmbH
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _PTP_CLOCK_H_
+#define _PTP_CLOCK_H_
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+/* PTP_xxx bits, for the flags field within the request structures. */
+#define PTP_ENABLE_FEATURE (1<<0)
+#define PTP_RISING_EDGE    (1<<1)
+#define PTP_FALLING_EDGE   (1<<2)
+
+/*
+ * struct ptp_clock_time - represents a time value
+ *
+ * The sign of the seconds field applies to the whole value. The
+ * nanoseconds field is always unsigned. The reserved field is
+ * included for sub-nanosecond resolution, should the demand for
+ * this ever appear.
+ *
+ */
+struct ptp_clock_time {
+	__s64 sec;  /* seconds */
+	__u32 nsec; /* nanoseconds */
+	__u32 reserved;
+};
+
+struct ptp_clock_caps {
+	int max_adj;   /* Maximum frequency adjustment in parts per billon. */
+	int n_alarm;   /* Number of programmable alarms. */
+	int n_ext_ts;  /* Number of external time stamp channels. */
+	int n_per_out; /* Number of programmable periodic signals. */
+	int pps;       /* Whether the clock supports a PPS callback. */
+	int rsv[15];   /* Reserved for future use. */
+};
+
+struct ptp_extts_request {
+	unsigned int index;  /* Which channel to configure. */
+	unsigned int flags;  /* Bit field for PTP_xxx flags. */
+	unsigned int rsv[2]; /* Reserved for future use. */
+};
+
+struct ptp_perout_request {
+	struct ptp_clock_time start;  /* Absolute start time. */
+	struct ptp_clock_time period; /* Desired period, zero means disable. */
+	unsigned int index;           /* Which channel to configure. */
+	unsigned int flags;           /* Reserved for future use. */
+	unsigned int rsv[4];          /* Reserved for future use. */
+};
+
+#define PTP_CLK_MAGIC '='
+
+#define PTP_CLOCK_GETCAPS  _IOR(PTP_CLK_MAGIC, 1, struct ptp_clock_caps)
+#define PTP_EXTTS_REQUEST  _IOW(PTP_CLK_MAGIC, 2, struct ptp_extts_request)
+#define PTP_PEROUT_REQUEST _IOW(PTP_CLK_MAGIC, 3, struct ptp_perout_request)
+#define PTP_ENABLE_PPS     _IOW(PTP_CLK_MAGIC, 4, int)
+
+struct ptp_extts_event {
+	struct ptp_clock_time t; /* Time event occured. */
+	unsigned int index;      /* Which channel produced the event. */
+	unsigned int flags;      /* Reserved for future use. */
+	unsigned int rsv[2];     /* Reserved for future use. */
+};
+
+#endif
diff --git a/include/uapi/linux/ptrace.h b/include/uapi/linux/ptrace.h
new file mode 100644
index 00000000000..1ef6c056a9e
--- /dev/null
+++ b/include/uapi/linux/ptrace.h
@@ -0,0 +1,81 @@
+#ifndef _UAPI_LINUX_PTRACE_H
+#define _UAPI_LINUX_PTRACE_H
+/* ptrace.h */
+/* structs and defines to help the user use the ptrace system call. */
+
+/* has the defines to get at the registers. */
+
+
+#define PTRACE_TRACEME		   0
+#define PTRACE_PEEKTEXT		   1
+#define PTRACE_PEEKDATA		   2
+#define PTRACE_PEEKUSR		   3
+#define PTRACE_POKETEXT		   4
+#define PTRACE_POKEDATA		   5
+#define PTRACE_POKEUSR		   6
+#define PTRACE_CONT		   7
+#define PTRACE_KILL		   8
+#define PTRACE_SINGLESTEP	   9
+
+#define PTRACE_ATTACH		  16
+#define PTRACE_DETACH		  17
+
+#define PTRACE_SYSCALL		  24
+
+/* 0x4200-0x4300 are reserved for architecture-independent additions.  */
+#define PTRACE_SETOPTIONS	0x4200
+#define PTRACE_GETEVENTMSG	0x4201
+#define PTRACE_GETSIGINFO	0x4202
+#define PTRACE_SETSIGINFO	0x4203
+
+/*
+ * Generic ptrace interface that exports the architecture specific regsets
+ * using the corresponding NT_* types (which are also used in the core dump).
+ * Please note that the NT_PRSTATUS note type in a core dump contains a full
+ * 'struct elf_prstatus'. But the user_regset for NT_PRSTATUS contains just the
+ * elf_gregset_t that is the pr_reg field of 'struct elf_prstatus'. For all the
+ * other user_regset flavors, the user_regset layout and the ELF core dump note
+ * payload are exactly the same layout.
+ *
+ * This interface usage is as follows:
+ *	struct iovec iov = { buf, len};
+ *
+ *	ret = ptrace(PTRACE_GETREGSET/PTRACE_SETREGSET, pid, NT_XXX_TYPE, &iov);
+ *
+ * On the successful completion, iov.len will be updated by the kernel,
+ * specifying how much the kernel has written/read to/from the user's iov.buf.
+ */
+#define PTRACE_GETREGSET	0x4204
+#define PTRACE_SETREGSET	0x4205
+
+#define PTRACE_SEIZE		0x4206
+#define PTRACE_INTERRUPT	0x4207
+#define PTRACE_LISTEN		0x4208
+
+/* Wait extended result codes for the above trace options.  */
+#define PTRACE_EVENT_FORK	1
+#define PTRACE_EVENT_VFORK	2
+#define PTRACE_EVENT_CLONE	3
+#define PTRACE_EVENT_EXEC	4
+#define PTRACE_EVENT_VFORK_DONE	5
+#define PTRACE_EVENT_EXIT	6
+#define PTRACE_EVENT_SECCOMP	7
+/* Extended result codes which enabled by means other than options.  */
+#define PTRACE_EVENT_STOP	128
+
+/* Options set using PTRACE_SETOPTIONS or using PTRACE_SEIZE @data param */
+#define PTRACE_O_TRACESYSGOOD	1
+#define PTRACE_O_TRACEFORK	(1 << PTRACE_EVENT_FORK)
+#define PTRACE_O_TRACEVFORK	(1 << PTRACE_EVENT_VFORK)
+#define PTRACE_O_TRACECLONE	(1 << PTRACE_EVENT_CLONE)
+#define PTRACE_O_TRACEEXEC	(1 << PTRACE_EVENT_EXEC)
+#define PTRACE_O_TRACEVFORKDONE	(1 << PTRACE_EVENT_VFORK_DONE)
+#define PTRACE_O_TRACEEXIT	(1 << PTRACE_EVENT_EXIT)
+#define PTRACE_O_TRACESECCOMP	(1 << PTRACE_EVENT_SECCOMP)
+
+#define PTRACE_O_MASK		0x000000ff
+
+#include <asm/ptrace.h>
+
+
+#endif /* _UAPI_LINUX_PTRACE_H */
diff --git a/include/uapi/linux/qnx4_fs.h b/include/uapi/linux/qnx4_fs.h
new file mode 100644
index 00000000000..8b9aee1a9ce
--- /dev/null
+++ b/include/uapi/linux/qnx4_fs.h
@@ -0,0 +1,88 @@
+/*
+ *  Name                         : qnx4_fs.h
+ *  Author                       : Richard Frowijn
+ *  Function                     : qnx4 global filesystem definitions
+ *  History                      : 23-03-1998 created
+ */
+#ifndef _LINUX_QNX4_FS_H
+#define _LINUX_QNX4_FS_H
+
+#include <linux/types.h>
+#include <linux/qnxtypes.h>
+#include <linux/magic.h>
+
+#define QNX4_ROOT_INO 1
+
+#define QNX4_MAX_XTNTS_PER_XBLK	60
+/* for di_status */
+#define QNX4_FILE_USED          0x01
+#define QNX4_FILE_MODIFIED      0x02
+#define QNX4_FILE_BUSY          0x04
+#define QNX4_FILE_LINK          0x08
+#define QNX4_FILE_INODE         0x10
+#define QNX4_FILE_FSYSCLEAN     0x20
+
+#define QNX4_I_MAP_SLOTS	8
+#define QNX4_Z_MAP_SLOTS	64
+#define QNX4_VALID_FS		0x0001	/* Clean fs. */
+#define QNX4_ERROR_FS		0x0002	/* fs has errors. */
+#define QNX4_BLOCK_SIZE         0x200	/* blocksize of 512 bytes */
+#define QNX4_BLOCK_SIZE_BITS    9	/* blocksize shift */
+#define QNX4_DIR_ENTRY_SIZE     0x040	/* dir entry size of 64 bytes */
+#define QNX4_DIR_ENTRY_SIZE_BITS 6	/* dir entry size shift */
+#define QNX4_XBLK_ENTRY_SIZE    0x200	/* xblk entry size */
+#define QNX4_INODES_PER_BLOCK   0x08	/* 512 / 64 */
+
+/* for filenames */
+#define QNX4_SHORT_NAME_MAX	16
+#define QNX4_NAME_MAX		48
+
+/*
+ * This is the original qnx4 inode layout on disk.
+ */
+struct qnx4_inode_entry {
+	char		di_fname[QNX4_SHORT_NAME_MAX];
+	qnx4_off_t	di_size;
+	qnx4_xtnt_t	di_first_xtnt;
+	__le32		di_xblk;
+	__le32		di_ftime;
+	__le32		di_mtime;
+	__le32		di_atime;
+	__le32		di_ctime;
+	qnx4_nxtnt_t	di_num_xtnts;
+	qnx4_mode_t	di_mode;
+	qnx4_muid_t	di_uid;
+	qnx4_mgid_t	di_gid;
+	qnx4_nlink_t	di_nlink;
+	__u8		di_zero[4];
+	qnx4_ftype_t	di_type;
+	__u8		di_status;
+};
+
+struct qnx4_link_info {
+	char		dl_fname[QNX4_NAME_MAX];
+	__le32		dl_inode_blk;
+	__u8		dl_inode_ndx;
+	__u8		dl_spare[10];
+	__u8		dl_status;
+};
+
+struct qnx4_xblk {
+	__le32		xblk_next_xblk;
+	__le32		xblk_prev_xblk;
+	__u8		xblk_num_xtnts;
+	__u8		xblk_spare[3];
+	__le32		xblk_num_blocks;
+	qnx4_xtnt_t	xblk_xtnts[QNX4_MAX_XTNTS_PER_XBLK];
+	char		xblk_signature[8];
+	qnx4_xtnt_t	xblk_first_xtnt;
+};
+
+struct qnx4_super_block {
+	struct qnx4_inode_entry RootDir;
+	struct qnx4_inode_entry Inode;
+	struct qnx4_inode_entry Boot;
+	struct qnx4_inode_entry AltBoot;
+};
+
+#endif
diff --git a/include/uapi/linux/qnxtypes.h b/include/uapi/linux/qnxtypes.h
new file mode 100644
index 00000000000..bebbe5cc4fb
--- /dev/null
+++ b/include/uapi/linux/qnxtypes.h
@@ -0,0 +1,28 @@
+/*
+ *  Name                         : qnxtypes.h
+ *  Author                       : Richard Frowijn
+ *  Function                     : standard qnx types
+ *  History                      : 22-03-1998 created
+ *
+ */
+
+#ifndef _QNX4TYPES_H
+#define _QNX4TYPES_H
+
+#include <linux/types.h>
+
+typedef __le16 qnx4_nxtnt_t;
+typedef __u8  qnx4_ftype_t;
+
+typedef struct {
+	__le32 xtnt_blk;
+	__le32 xtnt_size;
+} qnx4_xtnt_t;
+
+typedef __le16 qnx4_mode_t;
+typedef __le16 qnx4_muid_t;
+typedef __le16 qnx4_mgid_t;
+typedef __le32 qnx4_off_t;
+typedef __le16 qnx4_nlink_t;
+
+#endif
diff --git a/include/uapi/linux/quota.h b/include/uapi/linux/quota.h
new file mode 100644
index 00000000000..3b6cfbeb086
--- /dev/null
+++ b/include/uapi/linux/quota.h
@@ -0,0 +1,171 @@
+/*
+ * Copyright (c) 1982, 1986 Regents of the University of California.
+ * All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Robert Elz at The University of Melbourne.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef _UAPI_LINUX_QUOTA_
+#define _UAPI_LINUX_QUOTA_
+
+#include <linux/errno.h>
+#include <linux/types.h>
+
+#define __DQUOT_VERSION__	"dquot_6.5.2"
+
+#define MAXQUOTAS 2
+#define USRQUOTA  0		/* element used for user quotas */
+#define GRPQUOTA  1		/* element used for group quotas */
+
+/*
+ * Definitions for the default names of the quotas files.
+ */
+#define INITQFNAMES { \
+	"user",    /* USRQUOTA */ \
+	"group",   /* GRPQUOTA */ \
+	"undefined", \
+};
+
+/*
+ * Command definitions for the 'quotactl' system call.
+ * The commands are broken into a main command defined below
+ * and a subcommand that is used to convey the type of
+ * quota that is being manipulated (see above).
+ */
+#define SUBCMDMASK  0x00ff
+#define SUBCMDSHIFT 8
+#define QCMD(cmd, type)  (((cmd) << SUBCMDSHIFT) | ((type) & SUBCMDMASK))
+
+#define Q_SYNC     0x800001	/* sync disk copy of a filesystems quotas */
+#define Q_QUOTAON  0x800002	/* turn quotas on */
+#define Q_QUOTAOFF 0x800003	/* turn quotas off */
+#define Q_GETFMT   0x800004	/* get quota format used on given filesystem */
+#define Q_GETINFO  0x800005	/* get information about quota files */
+#define Q_SETINFO  0x800006	/* set information about quota files */
+#define Q_GETQUOTA 0x800007	/* get user quota structure */
+#define Q_SETQUOTA 0x800008	/* set user quota structure */
+
+/* Quota format type IDs */
+#define	QFMT_VFS_OLD 1
+#define	QFMT_VFS_V0 2
+#define QFMT_OCFS2 3
+#define	QFMT_VFS_V1 4
+
+/* Size of block in which space limits are passed through the quota
+ * interface */
+#define QIF_DQBLKSIZE_BITS 10
+#define QIF_DQBLKSIZE (1 << QIF_DQBLKSIZE_BITS)
+
+/*
+ * Quota structure used for communication with userspace via quotactl
+ * Following flags are used to specify which fields are valid
+ */
+enum {
+	QIF_BLIMITS_B = 0,
+	QIF_SPACE_B,
+	QIF_ILIMITS_B,
+	QIF_INODES_B,
+	QIF_BTIME_B,
+	QIF_ITIME_B,
+};
+
+#define QIF_BLIMITS	(1 << QIF_BLIMITS_B)
+#define QIF_SPACE	(1 << QIF_SPACE_B)
+#define QIF_ILIMITS	(1 << QIF_ILIMITS_B)
+#define QIF_INODES	(1 << QIF_INODES_B)
+#define QIF_BTIME	(1 << QIF_BTIME_B)
+#define QIF_ITIME	(1 << QIF_ITIME_B)
+#define QIF_LIMITS	(QIF_BLIMITS | QIF_ILIMITS)
+#define QIF_USAGE	(QIF_SPACE | QIF_INODES)
+#define QIF_TIMES	(QIF_BTIME | QIF_ITIME)
+#define QIF_ALL		(QIF_LIMITS | QIF_USAGE | QIF_TIMES)
+
+struct if_dqblk {
+	__u64 dqb_bhardlimit;
+	__u64 dqb_bsoftlimit;
+	__u64 dqb_curspace;
+	__u64 dqb_ihardlimit;
+	__u64 dqb_isoftlimit;
+	__u64 dqb_curinodes;
+	__u64 dqb_btime;
+	__u64 dqb_itime;
+	__u32 dqb_valid;
+};
+
+/*
+ * Structure used for setting quota information about file via quotactl
+ * Following flags are used to specify which fields are valid
+ */
+#define IIF_BGRACE	1
+#define IIF_IGRACE	2
+#define IIF_FLAGS	4
+#define IIF_ALL		(IIF_BGRACE | IIF_IGRACE | IIF_FLAGS)
+
+struct if_dqinfo {
+	__u64 dqi_bgrace;
+	__u64 dqi_igrace;
+	__u32 dqi_flags;
+	__u32 dqi_valid;
+};
+
+/*
+ * Definitions for quota netlink interface
+ */
+#define QUOTA_NL_NOWARN 0
+#define QUOTA_NL_IHARDWARN 1		/* Inode hardlimit reached */
+#define QUOTA_NL_ISOFTLONGWARN 2 	/* Inode grace time expired */
+#define QUOTA_NL_ISOFTWARN 3		/* Inode softlimit reached */
+#define QUOTA_NL_BHARDWARN 4		/* Block hardlimit reached */
+#define QUOTA_NL_BSOFTLONGWARN 5	/* Block grace time expired */
+#define QUOTA_NL_BSOFTWARN 6		/* Block softlimit reached */
+#define QUOTA_NL_IHARDBELOW 7		/* Usage got below inode hardlimit */
+#define QUOTA_NL_ISOFTBELOW 8		/* Usage got below inode softlimit */
+#define QUOTA_NL_BHARDBELOW 9		/* Usage got below block hardlimit */
+#define QUOTA_NL_BSOFTBELOW 10		/* Usage got below block softlimit */
+
+enum {
+	QUOTA_NL_C_UNSPEC,
+	QUOTA_NL_C_WARNING,
+	__QUOTA_NL_C_MAX,
+};
+#define QUOTA_NL_C_MAX (__QUOTA_NL_C_MAX - 1)
+
+enum {
+	QUOTA_NL_A_UNSPEC,
+	QUOTA_NL_A_QTYPE,
+	QUOTA_NL_A_EXCESS_ID,
+	QUOTA_NL_A_WARNING,
+	QUOTA_NL_A_DEV_MAJOR,
+	QUOTA_NL_A_DEV_MINOR,
+	QUOTA_NL_A_CAUSED_ID,
+	__QUOTA_NL_A_MAX,
+};
+#define QUOTA_NL_A_MAX (__QUOTA_NL_A_MAX - 1)
+
+
+#endif /* _UAPI_LINUX_QUOTA_ */
diff --git a/include/uapi/linux/radeonfb.h b/include/uapi/linux/radeonfb.h
new file mode 100644
index 00000000000..8c4bbdecc44
--- /dev/null
+++ b/include/uapi/linux/radeonfb.h
@@ -0,0 +1,15 @@
+#ifndef __LINUX_RADEONFB_H__
+#define __LINUX_RADEONFB_H__
+
+#include <asm/ioctl.h>
+#include <linux/types.h>
+
+#define ATY_RADEON_LCD_ON	0x00000001
+#define ATY_RADEON_CRT_ON	0x00000002
+
+
+#define FBIO_RADEON_GET_MIRROR	_IOR('@', 3, size_t)
+#define FBIO_RADEON_SET_MIRROR	_IOW('@', 4, size_t)
+
+#endif
+
diff --git a/include/uapi/linux/random.h b/include/uapi/linux/random.h
new file mode 100644
index 00000000000..7471b5b3b8b
--- /dev/null
+++ b/include/uapi/linux/random.h
@@ -0,0 +1,50 @@
+/*
+ * include/linux/random.h
+ *
+ * Include file for the random number generator.
+ */
+
+#ifndef _UAPI_LINUX_RANDOM_H
+#define _UAPI_LINUX_RANDOM_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+#include <linux/irqnr.h>
+
+/* ioctl()'s for the random number generator */
+
+/* Get the entropy count. */
+#define RNDGETENTCNT	_IOR( 'R', 0x00, int )
+
+/* Add to (or subtract from) the entropy count.  (Superuser only.) */
+#define RNDADDTOENTCNT	_IOW( 'R', 0x01, int )
+
+/* Get the contents of the entropy pool.  (Superuser only.) */
+#define RNDGETPOOL	_IOR( 'R', 0x02, int [2] )
+
+/* 
+ * Write bytes into the entropy pool and add to the entropy count.
+ * (Superuser only.)
+ */
+#define RNDADDENTROPY	_IOW( 'R', 0x03, int [2] )
+
+/* Clear entropy count to 0.  (Superuser only.) */
+#define RNDZAPENTCNT	_IO( 'R', 0x04 )
+
+/* Clear the entropy pool and associated counters.  (Superuser only.) */
+#define RNDCLEARPOOL	_IO( 'R', 0x06 )
+
+struct rand_pool_info {
+	int	entropy_count;
+	int	buf_size;
+	__u32	buf[0];
+};
+
+struct rnd_state {
+	__u32 s1, s2, s3;
+};
+
+/* Exported functions */
+
+
+#endif /* _UAPI_LINUX_RANDOM_H */
diff --git a/include/uapi/linux/raw.h b/include/uapi/linux/raw.h
new file mode 100644
index 00000000000..62d543e7060
--- /dev/null
+++ b/include/uapi/linux/raw.h
@@ -0,0 +1,18 @@
+#ifndef __LINUX_RAW_H
+#define __LINUX_RAW_H
+
+#include <linux/types.h>
+
+#define RAW_SETBIND	_IO( 0xac, 0 )
+#define RAW_GETBIND	_IO( 0xac, 1 )
+
+struct raw_config_request 
+{
+	int	raw_minor;
+	__u64	block_major;
+	__u64	block_minor;
+};
+
+#define MAX_RAW_MINORS CONFIG_MAX_RAW_DEVS
+
+#endif /* __LINUX_RAW_H */
diff --git a/include/uapi/linux/rds.h b/include/uapi/linux/rds.h
new file mode 100644
index 00000000000..91950950aa5
--- /dev/null
+++ b/include/uapi/linux/rds.h
@@ -0,0 +1,285 @@
+/*
+ * Copyright (c) 2008 Oracle.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#ifndef _LINUX_RDS_H
+#define _LINUX_RDS_H
+
+#include <linux/types.h>
+
+#define RDS_IB_ABI_VERSION		0x301
+
+/*
+ * setsockopt/getsockopt for SOL_RDS
+ */
+#define RDS_CANCEL_SENT_TO      	1
+#define RDS_GET_MR			2
+#define RDS_FREE_MR			3
+/* deprecated: RDS_BARRIER 4 */
+#define RDS_RECVERR			5
+#define RDS_CONG_MONITOR		6
+#define RDS_GET_MR_FOR_DEST		7
+
+/*
+ * Control message types for SOL_RDS.
+ *
+ * CMSG_RDMA_ARGS (sendmsg)
+ *	Request a RDMA transfer to/from the specified
+ *	memory ranges.
+ *	The cmsg_data is a struct rds_rdma_args.
+ * RDS_CMSG_RDMA_DEST (recvmsg, sendmsg)
+ *	Kernel informs application about intended
+ *	source/destination of a RDMA transfer
+ * RDS_CMSG_RDMA_MAP (sendmsg)
+ *	Application asks kernel to map the given
+ *	memory range into a IB MR, and send the
+ *	R_Key along in an RDS extension header.
+ *	The cmsg_data is a struct rds_get_mr_args,
+ *	the same as for the GET_MR setsockopt.
+ * RDS_CMSG_RDMA_STATUS (recvmsg)
+ *	Returns the status of a completed RDMA operation.
+ */
+#define RDS_CMSG_RDMA_ARGS		1
+#define RDS_CMSG_RDMA_DEST		2
+#define RDS_CMSG_RDMA_MAP		3
+#define RDS_CMSG_RDMA_STATUS		4
+#define RDS_CMSG_CONG_UPDATE		5
+#define RDS_CMSG_ATOMIC_FADD		6
+#define RDS_CMSG_ATOMIC_CSWP		7
+#define RDS_CMSG_MASKED_ATOMIC_FADD	8
+#define RDS_CMSG_MASKED_ATOMIC_CSWP	9
+
+#define RDS_INFO_FIRST			10000
+#define RDS_INFO_COUNTERS		10000
+#define RDS_INFO_CONNECTIONS		10001
+/* 10002 aka RDS_INFO_FLOWS is deprecated */
+#define RDS_INFO_SEND_MESSAGES		10003
+#define RDS_INFO_RETRANS_MESSAGES       10004
+#define RDS_INFO_RECV_MESSAGES          10005
+#define RDS_INFO_SOCKETS                10006
+#define RDS_INFO_TCP_SOCKETS            10007
+#define RDS_INFO_IB_CONNECTIONS		10008
+#define RDS_INFO_CONNECTION_STATS	10009
+#define RDS_INFO_IWARP_CONNECTIONS	10010
+#define RDS_INFO_LAST			10010
+
+struct rds_info_counter {
+	uint8_t	name[32];
+	uint64_t	value;
+} __attribute__((packed));
+
+#define RDS_INFO_CONNECTION_FLAG_SENDING	0x01
+#define RDS_INFO_CONNECTION_FLAG_CONNECTING	0x02
+#define RDS_INFO_CONNECTION_FLAG_CONNECTED	0x04
+
+#define TRANSNAMSIZ	16
+
+struct rds_info_connection {
+	uint64_t	next_tx_seq;
+	uint64_t	next_rx_seq;
+	__be32		laddr;
+	__be32		faddr;
+	uint8_t	transport[TRANSNAMSIZ];		/* null term ascii */
+	uint8_t	flags;
+} __attribute__((packed));
+
+#define RDS_INFO_MESSAGE_FLAG_ACK               0x01
+#define RDS_INFO_MESSAGE_FLAG_FAST_ACK          0x02
+
+struct rds_info_message {
+	uint64_t	seq;
+	uint32_t	len;
+	__be32		laddr;
+	__be32		faddr;
+	__be16		lport;
+	__be16		fport;
+	uint8_t	flags;
+} __attribute__((packed));
+
+struct rds_info_socket {
+	uint32_t	sndbuf;
+	__be32		bound_addr;
+	__be32		connected_addr;
+	__be16		bound_port;
+	__be16		connected_port;
+	uint32_t	rcvbuf;
+	uint64_t	inum;
+} __attribute__((packed));
+
+struct rds_info_tcp_socket {
+	__be32          local_addr;
+	__be16          local_port;
+	__be32          peer_addr;
+	__be16          peer_port;
+	uint64_t       hdr_rem;
+	uint64_t       data_rem;
+	uint32_t       last_sent_nxt;
+	uint32_t       last_expected_una;
+	uint32_t       last_seen_una;
+} __attribute__((packed));
+
+#define RDS_IB_GID_LEN	16
+struct rds_info_rdma_connection {
+	__be32		src_addr;
+	__be32		dst_addr;
+	uint8_t		src_gid[RDS_IB_GID_LEN];
+	uint8_t		dst_gid[RDS_IB_GID_LEN];
+
+	uint32_t	max_send_wr;
+	uint32_t	max_recv_wr;
+	uint32_t	max_send_sge;
+	uint32_t	rdma_mr_max;
+	uint32_t	rdma_mr_size;
+};
+
+/*
+ * Congestion monitoring.
+ * Congestion control in RDS happens at the host connection
+ * level by exchanging a bitmap marking congested ports.
+ * By default, a process sleeping in poll() is always woken
+ * up when the congestion map is updated.
+ * With explicit monitoring, an application can have more
+ * fine-grained control.
+ * The application installs a 64bit mask value in the socket,
+ * where each bit corresponds to a group of ports.
+ * When a congestion update arrives, RDS checks the set of
+ * ports that are now uncongested against the list bit mask
+ * installed in the socket, and if they overlap, we queue a
+ * cong_notification on the socket.
+ *
+ * To install the congestion monitor bitmask, use RDS_CONG_MONITOR
+ * with the 64bit mask.
+ * Congestion updates are received via RDS_CMSG_CONG_UPDATE
+ * control messages.
+ *
+ * The correspondence between bits and ports is
+ *	1 << (portnum % 64)
+ */
+#define RDS_CONG_MONITOR_SIZE	64
+#define RDS_CONG_MONITOR_BIT(port)  (((unsigned int) port) % RDS_CONG_MONITOR_SIZE)
+#define RDS_CONG_MONITOR_MASK(port) (1ULL << RDS_CONG_MONITOR_BIT(port))
+
+/*
+ * RDMA related types
+ */
+
+/*
+ * This encapsulates a remote memory location.
+ * In the current implementation, it contains the R_Key
+ * of the remote memory region, and the offset into it
+ * (so that the application does not have to worry about
+ * alignment).
+ */
+typedef uint64_t	rds_rdma_cookie_t;
+
+struct rds_iovec {
+	uint64_t	addr;
+	uint64_t	bytes;
+};
+
+struct rds_get_mr_args {
+	struct rds_iovec vec;
+	uint64_t	cookie_addr;
+	uint64_t	flags;
+};
+
+struct rds_get_mr_for_dest_args {
+	struct sockaddr_storage	dest_addr;
+	struct rds_iovec 	vec;
+	uint64_t		cookie_addr;
+	uint64_t		flags;
+};
+
+struct rds_free_mr_args {
+	rds_rdma_cookie_t cookie;
+	uint64_t	flags;
+};
+
+struct rds_rdma_args {
+	rds_rdma_cookie_t cookie;
+	struct rds_iovec remote_vec;
+	uint64_t	local_vec_addr;
+	uint64_t	nr_local;
+	uint64_t	flags;
+	uint64_t	user_token;
+};
+
+struct rds_atomic_args {
+	rds_rdma_cookie_t cookie;
+	uint64_t 	local_addr;
+	uint64_t 	remote_addr;
+	union {
+		struct {
+			uint64_t	compare;
+			uint64_t	swap;
+		} cswp;
+		struct {
+			uint64_t	add;
+		} fadd;
+		struct {
+			uint64_t	compare;
+			uint64_t	swap;
+			uint64_t	compare_mask;
+			uint64_t	swap_mask;
+		} m_cswp;
+		struct {
+			uint64_t	add;
+			uint64_t	nocarry_mask;
+		} m_fadd;
+	};
+	uint64_t	flags;
+	uint64_t	user_token;
+};
+
+struct rds_rdma_notify {
+	uint64_t	user_token;
+	int32_t		status;
+};
+
+#define RDS_RDMA_SUCCESS	0
+#define RDS_RDMA_REMOTE_ERROR	1
+#define RDS_RDMA_CANCELED	2
+#define RDS_RDMA_DROPPED	3
+#define RDS_RDMA_OTHER_ERROR	4
+
+/*
+ * Common set of flags for all RDMA related structs
+ */
+#define RDS_RDMA_READWRITE	0x0001
+#define RDS_RDMA_FENCE		0x0002	/* use FENCE for immediate send */
+#define RDS_RDMA_INVALIDATE	0x0004	/* invalidate R_Key after freeing MR */
+#define RDS_RDMA_USE_ONCE	0x0008	/* free MR after use */
+#define RDS_RDMA_DONTWAIT	0x0010	/* Don't wait in SET_BARRIER */
+#define RDS_RDMA_NOTIFY_ME	0x0020	/* Notify when operation completes */
+#define RDS_RDMA_SILENT		0x0040	/* Do not interrupt remote */
+
+#endif /* IB_RDS_H */
diff --git a/include/uapi/linux/reboot.h b/include/uapi/linux/reboot.h
new file mode 100644
index 00000000000..09d056d4fc5
--- /dev/null
+++ b/include/uapi/linux/reboot.h
@@ -0,0 +1,39 @@
+#ifndef _UAPI_LINUX_REBOOT_H
+#define _UAPI_LINUX_REBOOT_H
+
+/*
+ * Magic values required to use _reboot() system call.
+ */
+
+#define	LINUX_REBOOT_MAGIC1	0xfee1dead
+#define	LINUX_REBOOT_MAGIC2	672274793
+#define	LINUX_REBOOT_MAGIC2A	85072278
+#define	LINUX_REBOOT_MAGIC2B	369367448
+#define	LINUX_REBOOT_MAGIC2C	537993216
+
+
+/*
+ * Commands accepted by the _reboot() system call.
+ *
+ * RESTART     Restart system using default command and mode.
+ * HALT        Stop OS and give system control to ROM monitor, if any.
+ * CAD_ON      Ctrl-Alt-Del sequence causes RESTART command.
+ * CAD_OFF     Ctrl-Alt-Del sequence sends SIGINT to init task.
+ * POWER_OFF   Stop OS and remove all power from system, if possible.
+ * RESTART2    Restart system using given command string.
+ * SW_SUSPEND  Suspend system using software suspend if compiled in.
+ * KEXEC       Restart system using a previously loaded Linux kernel
+ */
+
+#define	LINUX_REBOOT_CMD_RESTART	0x01234567
+#define	LINUX_REBOOT_CMD_HALT		0xCDEF0123
+#define	LINUX_REBOOT_CMD_CAD_ON		0x89ABCDEF
+#define	LINUX_REBOOT_CMD_CAD_OFF	0x00000000
+#define	LINUX_REBOOT_CMD_POWER_OFF	0x4321FEDC
+#define	LINUX_REBOOT_CMD_RESTART2	0xA1B2C3D4
+#define	LINUX_REBOOT_CMD_SW_SUSPEND	0xD000FCE2
+#define	LINUX_REBOOT_CMD_KEXEC		0x45584543
+
+
+
+#endif /* _UAPI_LINUX_REBOOT_H */
diff --git a/include/uapi/linux/reiserfs_fs.h b/include/uapi/linux/reiserfs_fs.h
new file mode 100644
index 00000000000..ea3700cd736
--- /dev/null
+++ b/include/uapi/linux/reiserfs_fs.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright 1996, 1997, 1998 Hans Reiser, see reiserfs/README for licensing and copyright details
+ */
+#ifndef _LINUX_REISER_FS_H
+#define _LINUX_REISER_FS_H
+
+#include <linux/types.h>
+#include <linux/magic.h>
+
+/*
+ *  include/linux/reiser_fs.h
+ *
+ *  Reiser File System constants and structures
+ *
+ */
+
+/* ioctl's command */
+#define REISERFS_IOC_UNPACK		_IOW(0xCD,1,long)
+/* define following flags to be the same as in ext2, so that chattr(1),
+   lsattr(1) will work with us. */
+#define REISERFS_IOC_GETFLAGS		FS_IOC_GETFLAGS
+#define REISERFS_IOC_SETFLAGS		FS_IOC_SETFLAGS
+#define REISERFS_IOC_GETVERSION		FS_IOC_GETVERSION
+#define REISERFS_IOC_SETVERSION		FS_IOC_SETVERSION
+
+#endif				/* _LINUX_REISER_FS_H */
diff --git a/include/uapi/linux/reiserfs_xattr.h b/include/uapi/linux/reiserfs_xattr.h
new file mode 100644
index 00000000000..d8ce17c2459
--- /dev/null
+++ b/include/uapi/linux/reiserfs_xattr.h
@@ -0,0 +1,24 @@
+/*
+  File: linux/reiserfs_xattr.h
+*/
+
+#ifndef _LINUX_REISERFS_XATTR_H
+#define _LINUX_REISERFS_XATTR_H
+
+#include <linux/types.h>
+
+/* Magic value in header */
+#define REISERFS_XATTR_MAGIC 0x52465841	/* "RFXA" */
+
+struct reiserfs_xattr_header {
+	__le32 h_magic;		/* magic number for identification */
+	__le32 h_hash;		/* hash of the value */
+};
+
+struct reiserfs_security_handle {
+	char *name;
+	void *value;
+	size_t length;
+};
+
+#endif  /*  _LINUX_REISERFS_XATTR_H  */
diff --git a/include/uapi/linux/resource.h b/include/uapi/linux/resource.h
new file mode 100644
index 00000000000..e0ed28477f4
--- /dev/null
+++ b/include/uapi/linux/resource.h
@@ -0,0 +1,80 @@
+#ifndef _UAPI_LINUX_RESOURCE_H
+#define _UAPI_LINUX_RESOURCE_H
+
+#include <linux/time.h>
+#include <linux/types.h>
+
+/*
+ * Resource control/accounting header file for linux
+ */
+
+/*
+ * Definition of struct rusage taken from BSD 4.3 Reno
+ * 
+ * We don't support all of these yet, but we might as well have them....
+ * Otherwise, each time we add new items, programs which depend on this
+ * structure will lose.  This reduces the chances of that happening.
+ */
+#define	RUSAGE_SELF	0
+#define	RUSAGE_CHILDREN	(-1)
+#define RUSAGE_BOTH	(-2)		/* sys_wait4() uses this */
+#define	RUSAGE_THREAD	1		/* only the calling thread */
+
+struct	rusage {
+	struct timeval ru_utime;	/* user time used */
+	struct timeval ru_stime;	/* system time used */
+	long	ru_maxrss;		/* maximum resident set size */
+	long	ru_ixrss;		/* integral shared memory size */
+	long	ru_idrss;		/* integral unshared data size */
+	long	ru_isrss;		/* integral unshared stack size */
+	long	ru_minflt;		/* page reclaims */
+	long	ru_majflt;		/* page faults */
+	long	ru_nswap;		/* swaps */
+	long	ru_inblock;		/* block input operations */
+	long	ru_oublock;		/* block output operations */
+	long	ru_msgsnd;		/* messages sent */
+	long	ru_msgrcv;		/* messages received */
+	long	ru_nsignals;		/* signals received */
+	long	ru_nvcsw;		/* voluntary context switches */
+	long	ru_nivcsw;		/* involuntary " */
+};
+
+struct rlimit {
+	unsigned long	rlim_cur;
+	unsigned long	rlim_max;
+};
+
+#define RLIM64_INFINITY		(~0ULL)
+
+struct rlimit64 {
+	__u64 rlim_cur;
+	__u64 rlim_max;
+};
+
+#define	PRIO_MIN	(-20)
+#define	PRIO_MAX	20
+
+#define	PRIO_PROCESS	0
+#define	PRIO_PGRP	1
+#define	PRIO_USER	2
+
+/*
+ * Limit the stack by to some sane default: root can always
+ * increase this limit if needed..  8MB seems reasonable.
+ */
+#define _STK_LIM	(8*1024*1024)
+
+/*
+ * GPG2 wants 64kB of mlocked memory, to make sure pass phrases
+ * and other sensitive information are never written to disk.
+ */
+#define MLOCK_LIMIT	((PAGE_SIZE > 64*1024) ? PAGE_SIZE : 64*1024)
+
+/*
+ * Due to binary compatibility, the actual resource numbers
+ * may be different for different linux versions..
+ */
+#include <asm/resource.h>
+
+
+#endif /* _UAPI_LINUX_RESOURCE_H */
diff --git a/include/uapi/linux/rfkill.h b/include/uapi/linux/rfkill.h
new file mode 100644
index 00000000000..2753c6cc974
--- /dev/null
+++ b/include/uapi/linux/rfkill.h
@@ -0,0 +1,107 @@
+/*
+ * Copyright (C) 2006 - 2007 Ivo van Doorn
+ * Copyright (C) 2007 Dmitry Torokhov
+ * Copyright 2009 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#ifndef _UAPI__RFKILL_H
+#define _UAPI__RFKILL_H
+
+
+#include <linux/types.h>
+
+/* define userspace visible states */
+#define RFKILL_STATE_SOFT_BLOCKED	0
+#define RFKILL_STATE_UNBLOCKED		1
+#define RFKILL_STATE_HARD_BLOCKED	2
+
+/**
+ * enum rfkill_type - type of rfkill switch.
+ *
+ * @RFKILL_TYPE_ALL: toggles all switches (requests only - not a switch type)
+ * @RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device.
+ * @RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device.
+ * @RFKILL_TYPE_UWB: switch is on a ultra wideband device.
+ * @RFKILL_TYPE_WIMAX: switch is on a WiMAX device.
+ * @RFKILL_TYPE_WWAN: switch is on a wireless WAN device.
+ * @RFKILL_TYPE_GPS: switch is on a GPS device.
+ * @RFKILL_TYPE_FM: switch is on a FM radio device.
+ * @NUM_RFKILL_TYPES: number of defined rfkill types
+ */
+enum rfkill_type {
+	RFKILL_TYPE_ALL = 0,
+	RFKILL_TYPE_WLAN,
+	RFKILL_TYPE_BLUETOOTH,
+	RFKILL_TYPE_UWB,
+	RFKILL_TYPE_WIMAX,
+	RFKILL_TYPE_WWAN,
+	RFKILL_TYPE_GPS,
+	RFKILL_TYPE_FM,
+	NUM_RFKILL_TYPES,
+};
+
+/**
+ * enum rfkill_operation - operation types
+ * @RFKILL_OP_ADD: a device was added
+ * @RFKILL_OP_DEL: a device was removed
+ * @RFKILL_OP_CHANGE: a device's state changed -- userspace changes one device
+ * @RFKILL_OP_CHANGE_ALL: userspace changes all devices (of a type, or all)
+ */
+enum rfkill_operation {
+	RFKILL_OP_ADD = 0,
+	RFKILL_OP_DEL,
+	RFKILL_OP_CHANGE,
+	RFKILL_OP_CHANGE_ALL,
+};
+
+/**
+ * struct rfkill_event - events for userspace on /dev/rfkill
+ * @idx: index of dev rfkill
+ * @type: type of the rfkill struct
+ * @op: operation code
+ * @hard: hard state (0/1)
+ * @soft: soft state (0/1)
+ *
+ * Structure used for userspace communication on /dev/rfkill,
+ * used for events from the kernel and control to the kernel.
+ */
+struct rfkill_event {
+	__u32 idx;
+	__u8  type;
+	__u8  op;
+	__u8  soft, hard;
+} __attribute__((packed));
+
+/*
+ * We are planning to be backward and forward compatible with changes
+ * to the event struct, by adding new, optional, members at the end.
+ * When reading an event (whether the kernel from userspace or vice
+ * versa) we need to accept anything that's at least as large as the
+ * version 1 event size, but might be able to accept other sizes in
+ * the future.
+ *
+ * One exception is the kernel -- we already have two event sizes in
+ * that we've made the 'hard' member optional since our only option
+ * is to ignore it anyway.
+ */
+#define RFKILL_EVENT_SIZE_V1	8
+
+/* ioctl for turning off rfkill-input (if present) */
+#define RFKILL_IOC_MAGIC	'R'
+#define RFKILL_IOC_NOINPUT	1
+#define RFKILL_IOCTL_NOINPUT	_IO(RFKILL_IOC_MAGIC, RFKILL_IOC_NOINPUT)
+
+/* and that's all userspace gets */
+
+#endif /* _UAPI__RFKILL_H */
diff --git a/include/uapi/linux/romfs_fs.h b/include/uapi/linux/romfs_fs.h
new file mode 100644
index 00000000000..5f57f93b284
--- /dev/null
+++ b/include/uapi/linux/romfs_fs.h
@@ -0,0 +1,59 @@
+#ifndef __LINUX_ROMFS_FS_H
+#define __LINUX_ROMFS_FS_H
+
+#include <linux/types.h>
+#include <linux/fs.h>
+
+/* The basic structures of the romfs filesystem */
+
+#define ROMBSIZE BLOCK_SIZE
+#define ROMBSBITS BLOCK_SIZE_BITS
+#define ROMBMASK (ROMBSIZE-1)
+#define ROMFS_MAGIC 0x7275
+
+#define ROMFS_MAXFN 128
+
+#define __mkw(h,l) (((h)&0x00ff)<< 8|((l)&0x00ff))
+#define __mkl(h,l) (((h)&0xffff)<<16|((l)&0xffff))
+#define __mk4(a,b,c,d) cpu_to_be32(__mkl(__mkw(a,b),__mkw(c,d)))
+#define ROMSB_WORD0 __mk4('-','r','o','m')
+#define ROMSB_WORD1 __mk4('1','f','s','-')
+
+/* On-disk "super block" */
+
+struct romfs_super_block {
+	__be32 word0;
+	__be32 word1;
+	__be32 size;
+	__be32 checksum;
+	char name[0];		/* volume name */
+};
+
+/* On disk inode */
+
+struct romfs_inode {
+	__be32 next;		/* low 4 bits see ROMFH_ */
+	__be32 spec;
+	__be32 size;
+	__be32 checksum;
+	char name[0];
+};
+
+#define ROMFH_TYPE 7
+#define ROMFH_HRD 0
+#define ROMFH_DIR 1
+#define ROMFH_REG 2
+#define ROMFH_SYM 3
+#define ROMFH_BLK 4
+#define ROMFH_CHR 5
+#define ROMFH_SCK 6
+#define ROMFH_FIF 7
+#define ROMFH_EXEC 8
+
+/* Alignment */
+
+#define ROMFH_SIZE 16
+#define ROMFH_PAD (ROMFH_SIZE-1)
+#define ROMFH_MASK (~ROMFH_PAD)
+
+#endif
diff --git a/include/uapi/linux/rose.h b/include/uapi/linux/rose.h
new file mode 100644
index 00000000000..1fcfe95893b
--- /dev/null
+++ b/include/uapi/linux/rose.h
@@ -0,0 +1,90 @@
+/*
+ * These are the public elements of the Linux kernel Rose implementation.
+ * For kernel AX.25 see the file ax25.h. This file requires ax25.h for the
+ * definition of the ax25_address structure.
+ */
+
+#ifndef	ROSE_KERNEL_H
+#define	ROSE_KERNEL_H
+
+#include <linux/socket.h>
+#include <linux/ax25.h>
+
+#define ROSE_MTU	251
+
+#define ROSE_MAX_DIGIS 6
+
+#define	ROSE_DEFER	1
+#define ROSE_T1		2
+#define	ROSE_T2		3
+#define	ROSE_T3		4
+#define	ROSE_IDLE	5
+#define	ROSE_QBITINCL	6
+#define	ROSE_HOLDBACK	7
+
+#define	SIOCRSGCAUSE		(SIOCPROTOPRIVATE+0)
+#define	SIOCRSSCAUSE		(SIOCPROTOPRIVATE+1)
+#define	SIOCRSL2CALL		(SIOCPROTOPRIVATE+2)
+#define	SIOCRSSL2CALL		(SIOCPROTOPRIVATE+2)
+#define	SIOCRSACCEPT		(SIOCPROTOPRIVATE+3)
+#define	SIOCRSCLRRT		(SIOCPROTOPRIVATE+4)
+#define	SIOCRSGL2CALL		(SIOCPROTOPRIVATE+5)
+#define	SIOCRSGFACILITIES	(SIOCPROTOPRIVATE+6)
+
+#define	ROSE_DTE_ORIGINATED	0x00
+#define	ROSE_NUMBER_BUSY	0x01
+#define	ROSE_INVALID_FACILITY	0x03
+#define	ROSE_NETWORK_CONGESTION	0x05
+#define	ROSE_OUT_OF_ORDER	0x09
+#define	ROSE_ACCESS_BARRED	0x0B
+#define	ROSE_NOT_OBTAINABLE	0x0D
+#define	ROSE_REMOTE_PROCEDURE	0x11
+#define	ROSE_LOCAL_PROCEDURE	0x13
+#define	ROSE_SHIP_ABSENT	0x39
+
+typedef struct {
+	char		rose_addr[5];
+} rose_address;
+
+struct sockaddr_rose {
+	__kernel_sa_family_t srose_family;
+	rose_address	srose_addr;
+	ax25_address	srose_call;
+	int		srose_ndigis;
+	ax25_address	srose_digi;
+};
+
+struct full_sockaddr_rose {
+	__kernel_sa_family_t srose_family;
+	rose_address	srose_addr;
+	ax25_address	srose_call;
+	unsigned int	srose_ndigis;
+	ax25_address	srose_digis[ROSE_MAX_DIGIS];
+};
+
+struct rose_route_struct {
+	rose_address	address;
+	unsigned short	mask;
+	ax25_address	neighbour;
+	char		device[16];
+	unsigned char	ndigis;
+	ax25_address	digipeaters[AX25_MAX_DIGIS];
+};
+
+struct rose_cause_struct {
+	unsigned char	cause;
+	unsigned char	diagnostic;
+};
+
+struct rose_facilities_struct {
+	rose_address	source_addr,   dest_addr;
+	ax25_address	source_call,   dest_call;
+	unsigned char	source_ndigis, dest_ndigis;
+	ax25_address	source_digis[ROSE_MAX_DIGIS];
+	ax25_address	dest_digis[ROSE_MAX_DIGIS];
+	unsigned int	rand;
+	rose_address	fail_addr;
+	ax25_address	fail_call;
+};
+
+#endif
diff --git a/include/uapi/linux/route.h b/include/uapi/linux/route.h
new file mode 100644
index 00000000000..6600708311c
--- /dev/null
+++ b/include/uapi/linux/route.h
@@ -0,0 +1,69 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for the IP router interface.
+ *
+ * Version:	@(#)route.h	1.0.3	05/27/93
+ *
+ * Authors:	Original taken from Berkeley UNIX 4.3, (c) UCB 1986-1988
+ *		for the purposes of compatibility only.
+ *
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ * Changes:
+ *              Mike McLagan    :       Routing by source
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_ROUTE_H
+#define _LINUX_ROUTE_H
+
+#include <linux/if.h>
+#include <linux/compiler.h>
+
+/* This structure gets passed by the SIOCADDRT and SIOCDELRT calls. */
+struct rtentry {
+	unsigned long	rt_pad1;
+	struct sockaddr	rt_dst;		/* target address		*/
+	struct sockaddr	rt_gateway;	/* gateway addr (RTF_GATEWAY)	*/
+	struct sockaddr	rt_genmask;	/* target network mask (IP)	*/
+	unsigned short	rt_flags;
+	short		rt_pad2;
+	unsigned long	rt_pad3;
+	void		*rt_pad4;
+	short		rt_metric;	/* +1 for binary compatibility!	*/
+	char __user	*rt_dev;	/* forcing the device at add	*/
+	unsigned long	rt_mtu;		/* per route MTU/Window 	*/
+#ifndef __KERNEL__
+#define rt_mss	rt_mtu			/* Compatibility :-(            */
+#endif
+	unsigned long	rt_window;	/* Window clamping 		*/
+	unsigned short	rt_irtt;	/* Initial RTT			*/
+};
+
+
+#define	RTF_UP		0x0001		/* route usable		  	*/
+#define	RTF_GATEWAY	0x0002		/* destination is a gateway	*/
+#define	RTF_HOST	0x0004		/* host entry (net otherwise)	*/
+#define RTF_REINSTATE	0x0008		/* reinstate route after tmout	*/
+#define	RTF_DYNAMIC	0x0010		/* created dyn. (by redirect)	*/
+#define	RTF_MODIFIED	0x0020		/* modified dyn. (by redirect)	*/
+#define RTF_MTU		0x0040		/* specific MTU for this route	*/
+#define RTF_MSS		RTF_MTU		/* Compatibility :-(		*/
+#define RTF_WINDOW	0x0080		/* per route window clamping	*/
+#define RTF_IRTT	0x0100		/* Initial round trip time	*/
+#define RTF_REJECT	0x0200		/* Reject route			*/
+
+/*
+ *	<linux/ipv6_route.h> uses RTF values >= 64k
+ */
+
+
+
+#endif	/* _LINUX_ROUTE_H */
+
diff --git a/include/uapi/linux/rtc.h b/include/uapi/linux/rtc.h
new file mode 100644
index 00000000000..f8c82e6f25d
--- /dev/null
+++ b/include/uapi/linux/rtc.h
@@ -0,0 +1,107 @@
+/*
+ * Generic RTC interface.
+ * This version contains the part of the user interface to the Real Time Clock
+ * service. It is used with both the legacy mc146818 and also  EFI
+ * Struct rtc_time and first 12 ioctl by Paul Gortmaker, 1996 - separated out
+ * from <linux/mc146818rtc.h> to this file for 2.4 kernels.
+ *
+ * Copyright (C) 1999 Hewlett-Packard Co.
+ * Copyright (C) 1999 Stephane Eranian <eranian@hpl.hp.com>
+ */
+#ifndef _UAPI_LINUX_RTC_H_
+#define _UAPI_LINUX_RTC_H_
+
+/*
+ * The struct used to pass data via the following ioctl. Similar to the
+ * struct tm in <time.h>, but it needs to be here so that the kernel
+ * source is self contained, allowing cross-compiles, etc. etc.
+ */
+
+struct rtc_time {
+	int tm_sec;
+	int tm_min;
+	int tm_hour;
+	int tm_mday;
+	int tm_mon;
+	int tm_year;
+	int tm_wday;
+	int tm_yday;
+	int tm_isdst;
+};
+
+/*
+ * This data structure is inspired by the EFI (v0.92) wakeup
+ * alarm API.
+ */
+struct rtc_wkalrm {
+	unsigned char enabled;	/* 0 = alarm disabled, 1 = alarm enabled */
+	unsigned char pending;  /* 0 = alarm not pending, 1 = alarm pending */
+	struct rtc_time time;	/* time the alarm is set to */
+};
+
+/*
+ * Data structure to control PLL correction some better RTC feature
+ * pll_value is used to get or set current value of correction,
+ * the rest of the struct is used to query HW capabilities.
+ * This is modeled after the RTC used in Q40/Q60 computers but
+ * should be sufficiently flexible for other devices
+ *
+ * +ve pll_value means clock will run faster by
+ *   pll_value*pll_posmult/pll_clock
+ * -ve pll_value means clock will run slower by
+ *   pll_value*pll_negmult/pll_clock
+ */
+
+struct rtc_pll_info {
+	int pll_ctrl;       /* placeholder for fancier control */
+	int pll_value;      /* get/set correction value */
+	int pll_max;        /* max +ve (faster) adjustment value */
+	int pll_min;        /* max -ve (slower) adjustment value */
+	int pll_posmult;    /* factor for +ve correction */
+	int pll_negmult;    /* factor for -ve correction */
+	long pll_clock;     /* base PLL frequency */
+};
+
+/*
+ * ioctl calls that are permitted to the /dev/rtc interface, if
+ * any of the RTC drivers are enabled.
+ */
+
+#define RTC_AIE_ON	_IO('p', 0x01)	/* Alarm int. enable on		*/
+#define RTC_AIE_OFF	_IO('p', 0x02)	/* ... off			*/
+#define RTC_UIE_ON	_IO('p', 0x03)	/* Update int. enable on	*/
+#define RTC_UIE_OFF	_IO('p', 0x04)	/* ... off			*/
+#define RTC_PIE_ON	_IO('p', 0x05)	/* Periodic int. enable on	*/
+#define RTC_PIE_OFF	_IO('p', 0x06)	/* ... off			*/
+#define RTC_WIE_ON	_IO('p', 0x0f)  /* Watchdog int. enable on	*/
+#define RTC_WIE_OFF	_IO('p', 0x10)  /* ... off			*/
+
+#define RTC_ALM_SET	_IOW('p', 0x07, struct rtc_time) /* Set alarm time  */
+#define RTC_ALM_READ	_IOR('p', 0x08, struct rtc_time) /* Read alarm time */
+#define RTC_RD_TIME	_IOR('p', 0x09, struct rtc_time) /* Read RTC time   */
+#define RTC_SET_TIME	_IOW('p', 0x0a, struct rtc_time) /* Set RTC time    */
+#define RTC_IRQP_READ	_IOR('p', 0x0b, unsigned long)	 /* Read IRQ rate   */
+#define RTC_IRQP_SET	_IOW('p', 0x0c, unsigned long)	 /* Set IRQ rate    */
+#define RTC_EPOCH_READ	_IOR('p', 0x0d, unsigned long)	 /* Read epoch      */
+#define RTC_EPOCH_SET	_IOW('p', 0x0e, unsigned long)	 /* Set epoch       */
+
+#define RTC_WKALM_SET	_IOW('p', 0x0f, struct rtc_wkalrm)/* Set wakeup alarm*/
+#define RTC_WKALM_RD	_IOR('p', 0x10, struct rtc_wkalrm)/* Get wakeup alarm*/
+
+#define RTC_PLL_GET	_IOR('p', 0x11, struct rtc_pll_info)  /* Get PLL correction */
+#define RTC_PLL_SET	_IOW('p', 0x12, struct rtc_pll_info)  /* Set PLL correction */
+
+#define RTC_VL_READ	_IOR('p', 0x13, int)	/* Voltage low detector */
+#define RTC_VL_CLR	_IO('p', 0x14)		/* Clear voltage low information */
+
+/* interrupt flags */
+#define RTC_IRQF 0x80	/* Any of the following is active */
+#define RTC_PF 0x40	/* Periodic interrupt */
+#define RTC_AF 0x20	/* Alarm interrupt */
+#define RTC_UF 0x10	/* Update interrupt for 1Hz RTC */
+
+
+#define RTC_MAX_FREQ	8192
+
+
+#endif /* _UAPI_LINUX_RTC_H_ */
diff --git a/include/uapi/linux/rtnetlink.h b/include/uapi/linux/rtnetlink.h
new file mode 100644
index 00000000000..fcd768b09f6
--- /dev/null
+++ b/include/uapi/linux/rtnetlink.h
@@ -0,0 +1,612 @@
+#ifndef _UAPI__LINUX_RTNETLINK_H
+#define _UAPI__LINUX_RTNETLINK_H
+
+#include <linux/types.h>
+#include <linux/netlink.h>
+#include <linux/if_link.h>
+#include <linux/if_addr.h>
+#include <linux/neighbour.h>
+
+/* rtnetlink families. Values up to 127 are reserved for real address
+ * families, values above 128 may be used arbitrarily.
+ */
+#define RTNL_FAMILY_IPMR		128
+#define RTNL_FAMILY_IP6MR		129
+#define RTNL_FAMILY_MAX			129
+
+/****
+ *		Routing/neighbour discovery messages.
+ ****/
+
+/* Types of messages */
+
+enum {
+	RTM_BASE	= 16,
+#define RTM_BASE	RTM_BASE
+
+	RTM_NEWLINK	= 16,
+#define RTM_NEWLINK	RTM_NEWLINK
+	RTM_DELLINK,
+#define RTM_DELLINK	RTM_DELLINK
+	RTM_GETLINK,
+#define RTM_GETLINK	RTM_GETLINK
+	RTM_SETLINK,
+#define RTM_SETLINK	RTM_SETLINK
+
+	RTM_NEWADDR	= 20,
+#define RTM_NEWADDR	RTM_NEWADDR
+	RTM_DELADDR,
+#define RTM_DELADDR	RTM_DELADDR
+	RTM_GETADDR,
+#define RTM_GETADDR	RTM_GETADDR
+
+	RTM_NEWROUTE	= 24,
+#define RTM_NEWROUTE	RTM_NEWROUTE
+	RTM_DELROUTE,
+#define RTM_DELROUTE	RTM_DELROUTE
+	RTM_GETROUTE,
+#define RTM_GETROUTE	RTM_GETROUTE
+
+	RTM_NEWNEIGH	= 28,
+#define RTM_NEWNEIGH	RTM_NEWNEIGH
+	RTM_DELNEIGH,
+#define RTM_DELNEIGH	RTM_DELNEIGH
+	RTM_GETNEIGH,
+#define RTM_GETNEIGH	RTM_GETNEIGH
+
+	RTM_NEWRULE	= 32,
+#define RTM_NEWRULE	RTM_NEWRULE
+	RTM_DELRULE,
+#define RTM_DELRULE	RTM_DELRULE
+	RTM_GETRULE,
+#define RTM_GETRULE	RTM_GETRULE
+
+	RTM_NEWQDISC	= 36,
+#define RTM_NEWQDISC	RTM_NEWQDISC
+	RTM_DELQDISC,
+#define RTM_DELQDISC	RTM_DELQDISC
+	RTM_GETQDISC,
+#define RTM_GETQDISC	RTM_GETQDISC
+
+	RTM_NEWTCLASS	= 40,
+#define RTM_NEWTCLASS	RTM_NEWTCLASS
+	RTM_DELTCLASS,
+#define RTM_DELTCLASS	RTM_DELTCLASS
+	RTM_GETTCLASS,
+#define RTM_GETTCLASS	RTM_GETTCLASS
+
+	RTM_NEWTFILTER	= 44,
+#define RTM_NEWTFILTER	RTM_NEWTFILTER
+	RTM_DELTFILTER,
+#define RTM_DELTFILTER	RTM_DELTFILTER
+	RTM_GETTFILTER,
+#define RTM_GETTFILTER	RTM_GETTFILTER
+
+	RTM_NEWACTION	= 48,
+#define RTM_NEWACTION   RTM_NEWACTION
+	RTM_DELACTION,
+#define RTM_DELACTION   RTM_DELACTION
+	RTM_GETACTION,
+#define RTM_GETACTION   RTM_GETACTION
+
+	RTM_NEWPREFIX	= 52,
+#define RTM_NEWPREFIX	RTM_NEWPREFIX
+
+	RTM_GETMULTICAST = 58,
+#define RTM_GETMULTICAST RTM_GETMULTICAST
+
+	RTM_GETANYCAST	= 62,
+#define RTM_GETANYCAST	RTM_GETANYCAST
+
+	RTM_NEWNEIGHTBL	= 64,
+#define RTM_NEWNEIGHTBL	RTM_NEWNEIGHTBL
+	RTM_GETNEIGHTBL	= 66,
+#define RTM_GETNEIGHTBL	RTM_GETNEIGHTBL
+	RTM_SETNEIGHTBL,
+#define RTM_SETNEIGHTBL	RTM_SETNEIGHTBL
+
+	RTM_NEWNDUSEROPT = 68,
+#define RTM_NEWNDUSEROPT RTM_NEWNDUSEROPT
+
+	RTM_NEWADDRLABEL = 72,
+#define RTM_NEWADDRLABEL RTM_NEWADDRLABEL
+	RTM_DELADDRLABEL,
+#define RTM_DELADDRLABEL RTM_DELADDRLABEL
+	RTM_GETADDRLABEL,
+#define RTM_GETADDRLABEL RTM_GETADDRLABEL
+
+	RTM_GETDCB = 78,
+#define RTM_GETDCB RTM_GETDCB
+	RTM_SETDCB,
+#define RTM_SETDCB RTM_SETDCB
+
+	__RTM_MAX,
+#define RTM_MAX		(((__RTM_MAX + 3) & ~3) - 1)
+};
+
+#define RTM_NR_MSGTYPES	(RTM_MAX + 1 - RTM_BASE)
+#define RTM_NR_FAMILIES	(RTM_NR_MSGTYPES >> 2)
+#define RTM_FAM(cmd)	(((cmd) - RTM_BASE) >> 2)
+
+/* 
+   Generic structure for encapsulation of optional route information.
+   It is reminiscent of sockaddr, but with sa_family replaced
+   with attribute type.
+ */
+
+struct rtattr {
+	unsigned short	rta_len;
+	unsigned short	rta_type;
+};
+
+/* Macros to handle rtattributes */
+
+#define RTA_ALIGNTO	4
+#define RTA_ALIGN(len) ( ((len)+RTA_ALIGNTO-1) & ~(RTA_ALIGNTO-1) )
+#define RTA_OK(rta,len) ((len) >= (int)sizeof(struct rtattr) && \
+			 (rta)->rta_len >= sizeof(struct rtattr) && \
+			 (rta)->rta_len <= (len))
+#define RTA_NEXT(rta,attrlen)	((attrlen) -= RTA_ALIGN((rta)->rta_len), \
+				 (struct rtattr*)(((char*)(rta)) + RTA_ALIGN((rta)->rta_len)))
+#define RTA_LENGTH(len)	(RTA_ALIGN(sizeof(struct rtattr)) + (len))
+#define RTA_SPACE(len)	RTA_ALIGN(RTA_LENGTH(len))
+#define RTA_DATA(rta)   ((void*)(((char*)(rta)) + RTA_LENGTH(0)))
+#define RTA_PAYLOAD(rta) ((int)((rta)->rta_len) - RTA_LENGTH(0))
+
+
+
+
+/******************************************************************************
+ *		Definitions used in routing table administration.
+ ****/
+
+struct rtmsg {
+	unsigned char		rtm_family;
+	unsigned char		rtm_dst_len;
+	unsigned char		rtm_src_len;
+	unsigned char		rtm_tos;
+
+	unsigned char		rtm_table;	/* Routing table id */
+	unsigned char		rtm_protocol;	/* Routing protocol; see below	*/
+	unsigned char		rtm_scope;	/* See below */	
+	unsigned char		rtm_type;	/* See below	*/
+
+	unsigned		rtm_flags;
+};
+
+/* rtm_type */
+
+enum {
+	RTN_UNSPEC,
+	RTN_UNICAST,		/* Gateway or direct route	*/
+	RTN_LOCAL,		/* Accept locally		*/
+	RTN_BROADCAST,		/* Accept locally as broadcast,
+				   send as broadcast */
+	RTN_ANYCAST,		/* Accept locally as broadcast,
+				   but send as unicast */
+	RTN_MULTICAST,		/* Multicast route		*/
+	RTN_BLACKHOLE,		/* Drop				*/
+	RTN_UNREACHABLE,	/* Destination is unreachable   */
+	RTN_PROHIBIT,		/* Administratively prohibited	*/
+	RTN_THROW,		/* Not in this table		*/
+	RTN_NAT,		/* Translate this address	*/
+	RTN_XRESOLVE,		/* Use external resolver	*/
+	__RTN_MAX
+};
+
+#define RTN_MAX (__RTN_MAX - 1)
+
+
+/* rtm_protocol */
+
+#define RTPROT_UNSPEC	0
+#define RTPROT_REDIRECT	1	/* Route installed by ICMP redirects;
+				   not used by current IPv4 */
+#define RTPROT_KERNEL	2	/* Route installed by kernel		*/
+#define RTPROT_BOOT	3	/* Route installed during boot		*/
+#define RTPROT_STATIC	4	/* Route installed by administrator	*/
+
+/* Values of protocol >= RTPROT_STATIC are not interpreted by kernel;
+   they are just passed from user and back as is.
+   It will be used by hypothetical multiple routing daemons.
+   Note that protocol values should be standardized in order to
+   avoid conflicts.
+ */
+
+#define RTPROT_GATED	8	/* Apparently, GateD */
+#define RTPROT_RA	9	/* RDISC/ND router advertisements */
+#define RTPROT_MRT	10	/* Merit MRT */
+#define RTPROT_ZEBRA	11	/* Zebra */
+#define RTPROT_BIRD	12	/* BIRD */
+#define RTPROT_DNROUTED	13	/* DECnet routing daemon */
+#define RTPROT_XORP	14	/* XORP */
+#define RTPROT_NTK	15	/* Netsukuku */
+#define RTPROT_DHCP	16      /* DHCP client */
+
+/* rtm_scope
+
+   Really it is not scope, but sort of distance to the destination.
+   NOWHERE are reserved for not existing destinations, HOST is our
+   local addresses, LINK are destinations, located on directly attached
+   link and UNIVERSE is everywhere in the Universe.
+
+   Intermediate values are also possible f.e. interior routes
+   could be assigned a value between UNIVERSE and LINK.
+*/
+
+enum rt_scope_t {
+	RT_SCOPE_UNIVERSE=0,
+/* User defined values  */
+	RT_SCOPE_SITE=200,
+	RT_SCOPE_LINK=253,
+	RT_SCOPE_HOST=254,
+	RT_SCOPE_NOWHERE=255
+};
+
+/* rtm_flags */
+
+#define RTM_F_NOTIFY		0x100	/* Notify user of route change	*/
+#define RTM_F_CLONED		0x200	/* This route is cloned		*/
+#define RTM_F_EQUALIZE		0x400	/* Multipath equalizer: NI	*/
+#define RTM_F_PREFIX		0x800	/* Prefix addresses		*/
+
+/* Reserved table identifiers */
+
+enum rt_class_t {
+	RT_TABLE_UNSPEC=0,
+/* User defined values */
+	RT_TABLE_COMPAT=252,
+	RT_TABLE_DEFAULT=253,
+	RT_TABLE_MAIN=254,
+	RT_TABLE_LOCAL=255,
+	RT_TABLE_MAX=0xFFFFFFFF
+};
+
+
+/* Routing message attributes */
+
+enum rtattr_type_t {
+	RTA_UNSPEC,
+	RTA_DST,
+	RTA_SRC,
+	RTA_IIF,
+	RTA_OIF,
+	RTA_GATEWAY,
+	RTA_PRIORITY,
+	RTA_PREFSRC,
+	RTA_METRICS,
+	RTA_MULTIPATH,
+	RTA_PROTOINFO, /* no longer used */
+	RTA_FLOW,
+	RTA_CACHEINFO,
+	RTA_SESSION, /* no longer used */
+	RTA_MP_ALGO, /* no longer used */
+	RTA_TABLE,
+	RTA_MARK,
+	__RTA_MAX
+};
+
+#define RTA_MAX (__RTA_MAX - 1)
+
+#define RTM_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct rtmsg))))
+#define RTM_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct rtmsg))
+
+/* RTM_MULTIPATH --- array of struct rtnexthop.
+ *
+ * "struct rtnexthop" describes all necessary nexthop information,
+ * i.e. parameters of path to a destination via this nexthop.
+ *
+ * At the moment it is impossible to set different prefsrc, mtu, window
+ * and rtt for different paths from multipath.
+ */
+
+struct rtnexthop {
+	unsigned short		rtnh_len;
+	unsigned char		rtnh_flags;
+	unsigned char		rtnh_hops;
+	int			rtnh_ifindex;
+};
+
+/* rtnh_flags */
+
+#define RTNH_F_DEAD		1	/* Nexthop is dead (used by multipath)	*/
+#define RTNH_F_PERVASIVE	2	/* Do recursive gateway lookup	*/
+#define RTNH_F_ONLINK		4	/* Gateway is forced on link	*/
+
+/* Macros to handle hexthops */
+
+#define RTNH_ALIGNTO	4
+#define RTNH_ALIGN(len) ( ((len)+RTNH_ALIGNTO-1) & ~(RTNH_ALIGNTO-1) )
+#define RTNH_OK(rtnh,len) ((rtnh)->rtnh_len >= sizeof(struct rtnexthop) && \
+			   ((int)(rtnh)->rtnh_len) <= (len))
+#define RTNH_NEXT(rtnh)	((struct rtnexthop*)(((char*)(rtnh)) + RTNH_ALIGN((rtnh)->rtnh_len)))
+#define RTNH_LENGTH(len) (RTNH_ALIGN(sizeof(struct rtnexthop)) + (len))
+#define RTNH_SPACE(len)	RTNH_ALIGN(RTNH_LENGTH(len))
+#define RTNH_DATA(rtnh)   ((struct rtattr*)(((char*)(rtnh)) + RTNH_LENGTH(0)))
+
+/* RTM_CACHEINFO */
+
+struct rta_cacheinfo {
+	__u32	rta_clntref;
+	__u32	rta_lastuse;
+	__s32	rta_expires;
+	__u32	rta_error;
+	__u32	rta_used;
+
+#define RTNETLINK_HAVE_PEERINFO 1
+	__u32	rta_id;
+	__u32	rta_ts;
+	__u32	rta_tsage;
+};
+
+/* RTM_METRICS --- array of struct rtattr with types of RTAX_* */
+
+enum {
+	RTAX_UNSPEC,
+#define RTAX_UNSPEC RTAX_UNSPEC
+	RTAX_LOCK,
+#define RTAX_LOCK RTAX_LOCK
+	RTAX_MTU,
+#define RTAX_MTU RTAX_MTU
+	RTAX_WINDOW,
+#define RTAX_WINDOW RTAX_WINDOW
+	RTAX_RTT,
+#define RTAX_RTT RTAX_RTT
+	RTAX_RTTVAR,
+#define RTAX_RTTVAR RTAX_RTTVAR
+	RTAX_SSTHRESH,
+#define RTAX_SSTHRESH RTAX_SSTHRESH
+	RTAX_CWND,
+#define RTAX_CWND RTAX_CWND
+	RTAX_ADVMSS,
+#define RTAX_ADVMSS RTAX_ADVMSS
+	RTAX_REORDERING,
+#define RTAX_REORDERING RTAX_REORDERING
+	RTAX_HOPLIMIT,
+#define RTAX_HOPLIMIT RTAX_HOPLIMIT
+	RTAX_INITCWND,
+#define RTAX_INITCWND RTAX_INITCWND
+	RTAX_FEATURES,
+#define RTAX_FEATURES RTAX_FEATURES
+	RTAX_RTO_MIN,
+#define RTAX_RTO_MIN RTAX_RTO_MIN
+	RTAX_INITRWND,
+#define RTAX_INITRWND RTAX_INITRWND
+	__RTAX_MAX
+};
+
+#define RTAX_MAX (__RTAX_MAX - 1)
+
+#define RTAX_FEATURE_ECN	0x00000001
+#define RTAX_FEATURE_SACK	0x00000002
+#define RTAX_FEATURE_TIMESTAMP	0x00000004
+#define RTAX_FEATURE_ALLFRAG	0x00000008
+
+struct rta_session {
+	__u8	proto;
+	__u8	pad1;
+	__u16	pad2;
+
+	union {
+		struct {
+			__u16	sport;
+			__u16	dport;
+		} ports;
+
+		struct {
+			__u8	type;
+			__u8	code;
+			__u16	ident;
+		} icmpt;
+
+		__u32		spi;
+	} u;
+};
+
+/****
+ *		General form of address family dependent message.
+ ****/
+
+struct rtgenmsg {
+	unsigned char		rtgen_family;
+};
+
+/*****************************************************************
+ *		Link layer specific messages.
+ ****/
+
+/* struct ifinfomsg
+ * passes link level specific information, not dependent
+ * on network protocol.
+ */
+
+struct ifinfomsg {
+	unsigned char	ifi_family;
+	unsigned char	__ifi_pad;
+	unsigned short	ifi_type;		/* ARPHRD_* */
+	int		ifi_index;		/* Link index	*/
+	unsigned	ifi_flags;		/* IFF_* flags	*/
+	unsigned	ifi_change;		/* IFF_* change mask */
+};
+
+/********************************************************************
+ *		prefix information 
+ ****/
+
+struct prefixmsg {
+	unsigned char	prefix_family;
+	unsigned char	prefix_pad1;
+	unsigned short	prefix_pad2;
+	int		prefix_ifindex;
+	unsigned char	prefix_type;
+	unsigned char	prefix_len;
+	unsigned char	prefix_flags;
+	unsigned char	prefix_pad3;
+};
+
+enum 
+{
+	PREFIX_UNSPEC,
+	PREFIX_ADDRESS,
+	PREFIX_CACHEINFO,
+	__PREFIX_MAX
+};
+
+#define PREFIX_MAX	(__PREFIX_MAX - 1)
+
+struct prefix_cacheinfo {
+	__u32	preferred_time;
+	__u32	valid_time;
+};
+
+
+/*****************************************************************
+ *		Traffic control messages.
+ ****/
+
+struct tcmsg {
+	unsigned char	tcm_family;
+	unsigned char	tcm__pad1;
+	unsigned short	tcm__pad2;
+	int		tcm_ifindex;
+	__u32		tcm_handle;
+	__u32		tcm_parent;
+	__u32		tcm_info;
+};
+
+enum {
+	TCA_UNSPEC,
+	TCA_KIND,
+	TCA_OPTIONS,
+	TCA_STATS,
+	TCA_XSTATS,
+	TCA_RATE,
+	TCA_FCNT,
+	TCA_STATS2,
+	TCA_STAB,
+	__TCA_MAX
+};
+
+#define TCA_MAX (__TCA_MAX - 1)
+
+#define TCA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcmsg))))
+#define TCA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcmsg))
+
+/********************************************************************
+ *		Neighbor Discovery userland options
+ ****/
+
+struct nduseroptmsg {
+	unsigned char	nduseropt_family;
+	unsigned char	nduseropt_pad1;
+	unsigned short	nduseropt_opts_len;	/* Total length of options */
+	int		nduseropt_ifindex;
+	__u8		nduseropt_icmp_type;
+	__u8		nduseropt_icmp_code;
+	unsigned short	nduseropt_pad2;
+	unsigned int	nduseropt_pad3;
+	/* Followed by one or more ND options */
+};
+
+enum {
+	NDUSEROPT_UNSPEC,
+	NDUSEROPT_SRCADDR,
+	__NDUSEROPT_MAX
+};
+
+#define NDUSEROPT_MAX	(__NDUSEROPT_MAX - 1)
+
+#ifndef __KERNEL__
+/* RTnetlink multicast groups - backwards compatibility for userspace */
+#define RTMGRP_LINK		1
+#define RTMGRP_NOTIFY		2
+#define RTMGRP_NEIGH		4
+#define RTMGRP_TC		8
+
+#define RTMGRP_IPV4_IFADDR	0x10
+#define RTMGRP_IPV4_MROUTE	0x20
+#define RTMGRP_IPV4_ROUTE	0x40
+#define RTMGRP_IPV4_RULE	0x80
+
+#define RTMGRP_IPV6_IFADDR	0x100
+#define RTMGRP_IPV6_MROUTE	0x200
+#define RTMGRP_IPV6_ROUTE	0x400
+#define RTMGRP_IPV6_IFINFO	0x800
+
+#define RTMGRP_DECnet_IFADDR    0x1000
+#define RTMGRP_DECnet_ROUTE     0x4000
+
+#define RTMGRP_IPV6_PREFIX	0x20000
+#endif
+
+/* RTnetlink multicast groups */
+enum rtnetlink_groups {
+	RTNLGRP_NONE,
+#define RTNLGRP_NONE		RTNLGRP_NONE
+	RTNLGRP_LINK,
+#define RTNLGRP_LINK		RTNLGRP_LINK
+	RTNLGRP_NOTIFY,
+#define RTNLGRP_NOTIFY		RTNLGRP_NOTIFY
+	RTNLGRP_NEIGH,
+#define RTNLGRP_NEIGH		RTNLGRP_NEIGH
+	RTNLGRP_TC,
+#define RTNLGRP_TC		RTNLGRP_TC
+	RTNLGRP_IPV4_IFADDR,
+#define RTNLGRP_IPV4_IFADDR	RTNLGRP_IPV4_IFADDR
+	RTNLGRP_IPV4_MROUTE,
+#define	RTNLGRP_IPV4_MROUTE	RTNLGRP_IPV4_MROUTE
+	RTNLGRP_IPV4_ROUTE,
+#define RTNLGRP_IPV4_ROUTE	RTNLGRP_IPV4_ROUTE
+	RTNLGRP_IPV4_RULE,
+#define RTNLGRP_IPV4_RULE	RTNLGRP_IPV4_RULE
+	RTNLGRP_IPV6_IFADDR,
+#define RTNLGRP_IPV6_IFADDR	RTNLGRP_IPV6_IFADDR
+	RTNLGRP_IPV6_MROUTE,
+#define RTNLGRP_IPV6_MROUTE	RTNLGRP_IPV6_MROUTE
+	RTNLGRP_IPV6_ROUTE,
+#define RTNLGRP_IPV6_ROUTE	RTNLGRP_IPV6_ROUTE
+	RTNLGRP_IPV6_IFINFO,
+#define RTNLGRP_IPV6_IFINFO	RTNLGRP_IPV6_IFINFO
+	RTNLGRP_DECnet_IFADDR,
+#define RTNLGRP_DECnet_IFADDR	RTNLGRP_DECnet_IFADDR
+	RTNLGRP_NOP2,
+	RTNLGRP_DECnet_ROUTE,
+#define RTNLGRP_DECnet_ROUTE	RTNLGRP_DECnet_ROUTE
+	RTNLGRP_DECnet_RULE,
+#define RTNLGRP_DECnet_RULE	RTNLGRP_DECnet_RULE
+	RTNLGRP_NOP4,
+	RTNLGRP_IPV6_PREFIX,
+#define RTNLGRP_IPV6_PREFIX	RTNLGRP_IPV6_PREFIX
+	RTNLGRP_IPV6_RULE,
+#define RTNLGRP_IPV6_RULE	RTNLGRP_IPV6_RULE
+	RTNLGRP_ND_USEROPT,
+#define RTNLGRP_ND_USEROPT	RTNLGRP_ND_USEROPT
+	RTNLGRP_PHONET_IFADDR,
+#define RTNLGRP_PHONET_IFADDR	RTNLGRP_PHONET_IFADDR
+	RTNLGRP_PHONET_ROUTE,
+#define RTNLGRP_PHONET_ROUTE	RTNLGRP_PHONET_ROUTE
+	RTNLGRP_DCB,
+#define RTNLGRP_DCB		RTNLGRP_DCB
+	__RTNLGRP_MAX
+};
+#define RTNLGRP_MAX	(__RTNLGRP_MAX - 1)
+
+/* TC action piece */
+struct tcamsg {
+	unsigned char	tca_family;
+	unsigned char	tca__pad1;
+	unsigned short	tca__pad2;
+};
+#define TA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcamsg))))
+#define TA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcamsg))
+#define TCA_ACT_TAB 1 /* attr type must be >=1 */	
+#define TCAA_MAX 1
+
+/* New extended info filters for IFLA_EXT_MASK */
+#define RTEXT_FILTER_VF		(1 << 0)
+
+/* End of information exported to user level */
+
+
+
+#endif /* _UAPI__LINUX_RTNETLINK_H */
diff --git a/include/uapi/linux/scc.h b/include/uapi/linux/scc.h
new file mode 100644
index 00000000000..72b6b815337
--- /dev/null
+++ b/include/uapi/linux/scc.h
@@ -0,0 +1,172 @@
+/* $Id: scc.h,v 1.29 1997/04/02 14:56:45 jreuter Exp jreuter $ */
+
+#ifndef _UAPI_SCC_H
+#define _UAPI_SCC_H
+
+
+/* selection of hardware types */
+
+#define PA0HZP		0x00	/* hardware type for PA0HZP SCC card and compatible */
+#define EAGLE		0x01    /* hardware type for EAGLE card */
+#define PC100		0x02	/* hardware type for PC100 card */
+#define PRIMUS		0x04	/* hardware type for PRIMUS-PC (DG9BL) card */
+#define DRSI		0x08	/* hardware type for DRSI PC*Packet card */
+#define BAYCOM		0x10	/* hardware type for BayCom (U)SCC */
+
+/* DEV ioctl() commands */
+
+enum SCC_ioctl_cmds {
+	SIOCSCCRESERVED = SIOCDEVPRIVATE,
+	SIOCSCCCFG,
+	SIOCSCCINI,
+	SIOCSCCCHANINI,
+	SIOCSCCSMEM,
+	SIOCSCCGKISS,
+	SIOCSCCSKISS,
+	SIOCSCCGSTAT,
+	SIOCSCCCAL
+};
+
+/* Device parameter control (from WAMPES) */
+
+enum L1_params {
+	PARAM_DATA,
+	PARAM_TXDELAY,
+	PARAM_PERSIST,
+	PARAM_SLOTTIME,
+	PARAM_TXTAIL,
+	PARAM_FULLDUP,
+	PARAM_SOFTDCD,		/* was: PARAM_HW */
+	PARAM_MUTE,		/* ??? */
+	PARAM_DTR,
+	PARAM_RTS,
+	PARAM_SPEED,
+	PARAM_ENDDELAY,		/* ??? */
+	PARAM_GROUP,
+	PARAM_IDLE,
+	PARAM_MIN,
+	PARAM_MAXKEY,
+	PARAM_WAIT,
+	PARAM_MAXDEFER,
+	PARAM_TX,
+	PARAM_HWEVENT = 31,
+	PARAM_RETURN = 255	/* reset kiss mode */
+};
+
+/* fulldup parameter */
+
+enum FULLDUP_modes {
+	KISS_DUPLEX_HALF,	/* normal CSMA operation */
+	KISS_DUPLEX_FULL,	/* fullduplex, key down trx after transmission */
+	KISS_DUPLEX_LINK,	/* fullduplex, key down trx after 'idletime' sec */
+	KISS_DUPLEX_OPTIMA	/* fullduplex, let the protocol layer control the hw */
+};
+
+/* misc. parameters */
+
+#define TIMER_OFF	65535U	/* to switch off timers */
+#define NO_SUCH_PARAM	65534U	/* param not implemented */
+
+/* HWEVENT parameter */
+
+enum HWEVENT_opts {
+	HWEV_DCD_ON,
+	HWEV_DCD_OFF,
+	HWEV_ALL_SENT
+};
+
+/* channel grouping */
+
+#define RXGROUP		0100	/* if set, only tx when all channels clear */
+#define TXGROUP		0200	/* if set, don't transmit simultaneously */
+
+/* Tx/Rx clock sources */
+
+enum CLOCK_sources {
+	CLK_DPLL,	/* normal halfduplex operation */
+	CLK_EXTERNAL,	/* external clocking (G3RUH/DF9IC modems) */
+	CLK_DIVIDER,	/* Rx = DPLL, Tx = divider (fullduplex with */
+			/* modems without clock regeneration */
+	CLK_BRG		/* experimental fullduplex mode with DPLL/BRG for */
+			/* MODEMs without clock recovery */
+};
+
+/* Tx state */
+
+enum TX_state {
+	TXS_IDLE,	/* Transmitter off, no data pending */
+	TXS_BUSY,	/* waiting for permission to send / tailtime */
+	TXS_ACTIVE,	/* Transmitter on, sending data */
+	TXS_NEWFRAME,	/* reset CRC and send (next) frame */
+	TXS_IDLE2,	/* Transmitter on, no data pending */
+	TXS_WAIT,	/* Waiting for Mintime to expire */
+	TXS_TIMEOUT	/* We had a transmission timeout */
+};
+
+typedef unsigned long io_port;	/* type definition for an 'io port address' */
+
+/* SCC statistical information */
+
+struct scc_stat {
+        long rxints;            /* Receiver interrupts */
+        long txints;            /* Transmitter interrupts */
+        long exints;            /* External/status interrupts */
+        long spints;            /* Special receiver interrupts */
+
+        long txframes;          /* Packets sent */
+        long rxframes;          /* Number of Frames Actually Received */
+        long rxerrs;            /* CRC Errors */
+        long txerrs;		/* KISS errors */
+        
+	unsigned int nospace;	/* "Out of buffers" */
+	unsigned int rx_over;	/* Receiver Overruns */
+	unsigned int tx_under;	/* Transmitter Underruns */
+
+	unsigned int tx_state;	/* Transmitter state */
+	int tx_queued;		/* tx frames enqueued */
+
+	unsigned int maxqueue;	/* allocated tx_buffers */
+	unsigned int bufsize;	/* used buffersize */
+};
+
+struct scc_modem {
+	long speed;		/* Line speed, bps */
+	char clocksrc;		/* 0 = DPLL, 1 = external, 2 = divider */
+	char nrz;		/* NRZ instead of NRZI */	
+};
+
+struct scc_kiss_cmd {
+	int  	 command;	/* one of the KISS-Commands defined above */
+	unsigned param;		/* KISS-Param */
+};
+
+struct scc_hw_config {
+	io_port data_a;		/* data port channel A */
+	io_port ctrl_a;		/* control port channel A */
+	io_port data_b;		/* data port channel B */
+	io_port ctrl_b;		/* control port channel B */
+	io_port vector_latch;	/* INTACK-Latch (#) */
+	io_port	special;	/* special function port */
+
+	int	irq;		/* irq */
+	long	clock;		/* clock */
+	char	option;		/* command for function port */
+
+	char brand;		/* hardware type */
+	char escc;		/* use ext. features of a 8580/85180/85280 */
+};
+
+/* (#) only one INTACK latch allowed. */
+
+
+struct scc_mem_config {
+	unsigned int dummy;
+	unsigned int bufsize;
+};
+
+struct scc_calibrate {
+	unsigned int time;
+	unsigned char pattern;
+};
+
+#endif /* _UAPI_SCC_H */
diff --git a/include/uapi/linux/sched.h b/include/uapi/linux/sched.h
new file mode 100644
index 00000000000..5a0f945927a
--- /dev/null
+++ b/include/uapi/linux/sched.h
@@ -0,0 +1,46 @@
+#ifndef _UAPI_LINUX_SCHED_H
+#define _UAPI_LINUX_SCHED_H
+
+/*
+ * cloning flags:
+ */
+#define CSIGNAL		0x000000ff	/* signal mask to be sent at exit */
+#define CLONE_VM	0x00000100	/* set if VM shared between processes */
+#define CLONE_FS	0x00000200	/* set if fs info shared between processes */
+#define CLONE_FILES	0x00000400	/* set if open files shared between processes */
+#define CLONE_SIGHAND	0x00000800	/* set if signal handlers and blocked signals shared */
+#define CLONE_PTRACE	0x00002000	/* set if we want to let tracing continue on the child too */
+#define CLONE_VFORK	0x00004000	/* set if the parent wants the child to wake it up on mm_release */
+#define CLONE_PARENT	0x00008000	/* set if we want to have the same parent as the cloner */
+#define CLONE_THREAD	0x00010000	/* Same thread group? */
+#define CLONE_NEWNS	0x00020000	/* New namespace group? */
+#define CLONE_SYSVSEM	0x00040000	/* share system V SEM_UNDO semantics */
+#define CLONE_SETTLS	0x00080000	/* create a new TLS for the child */
+#define CLONE_PARENT_SETTID	0x00100000	/* set the TID in the parent */
+#define CLONE_CHILD_CLEARTID	0x00200000	/* clear the TID in the child */
+#define CLONE_DETACHED		0x00400000	/* Unused, ignored */
+#define CLONE_UNTRACED		0x00800000	/* set if the tracing process can't force CLONE_PTRACE on this clone */
+#define CLONE_CHILD_SETTID	0x01000000	/* set the TID in the child */
+/* 0x02000000 was previously the unused CLONE_STOPPED (Start in stopped state)
+   and is now available for re-use. */
+#define CLONE_NEWUTS		0x04000000	/* New utsname group? */
+#define CLONE_NEWIPC		0x08000000	/* New ipcs */
+#define CLONE_NEWUSER		0x10000000	/* New user namespace */
+#define CLONE_NEWPID		0x20000000	/* New pid namespace */
+#define CLONE_NEWNET		0x40000000	/* New network namespace */
+#define CLONE_IO		0x80000000	/* Clone io context */
+
+/*
+ * Scheduling policies
+ */
+#define SCHED_NORMAL		0
+#define SCHED_FIFO		1
+#define SCHED_RR		2
+#define SCHED_BATCH		3
+/* SCHED_ISO: reserved but not implemented yet */
+#define SCHED_IDLE		5
+/* Can be ORed in to make sure the process is reverted back to SCHED_NORMAL on fork */
+#define SCHED_RESET_ON_FORK     0x40000000
+
+
+#endif /* _UAPI_LINUX_SCHED_H */
diff --git a/include/uapi/linux/screen_info.h b/include/uapi/linux/screen_info.h
new file mode 100644
index 00000000000..7530e744762
--- /dev/null
+++ b/include/uapi/linux/screen_info.h
@@ -0,0 +1,74 @@
+#ifndef _UAPI_SCREEN_INFO_H
+#define _UAPI_SCREEN_INFO_H
+
+#include <linux/types.h>
+
+/*
+ * These are set up by the setup-routine at boot-time:
+ */
+
+struct screen_info {
+	__u8  orig_x;		/* 0x00 */
+	__u8  orig_y;		/* 0x01 */
+	__u16 ext_mem_k;	/* 0x02 */
+	__u16 orig_video_page;	/* 0x04 */
+	__u8  orig_video_mode;	/* 0x06 */
+	__u8  orig_video_cols;	/* 0x07 */
+	__u8  flags;		/* 0x08 */
+	__u8  unused2;		/* 0x09 */
+	__u16 orig_video_ega_bx;/* 0x0a */
+	__u16 unused3;		/* 0x0c */
+	__u8  orig_video_lines;	/* 0x0e */
+	__u8  orig_video_isVGA;	/* 0x0f */
+	__u16 orig_video_points;/* 0x10 */
+
+	/* VESA graphic mode -- linear frame buffer */
+	__u16 lfb_width;	/* 0x12 */
+	__u16 lfb_height;	/* 0x14 */
+	__u16 lfb_depth;	/* 0x16 */
+	__u32 lfb_base;		/* 0x18 */
+	__u32 lfb_size;		/* 0x1c */
+	__u16 cl_magic, cl_offset; /* 0x20 */
+	__u16 lfb_linelength;	/* 0x24 */
+	__u8  red_size;		/* 0x26 */
+	__u8  red_pos;		/* 0x27 */
+	__u8  green_size;	/* 0x28 */
+	__u8  green_pos;	/* 0x29 */
+	__u8  blue_size;	/* 0x2a */
+	__u8  blue_pos;		/* 0x2b */
+	__u8  rsvd_size;	/* 0x2c */
+	__u8  rsvd_pos;		/* 0x2d */
+	__u16 vesapm_seg;	/* 0x2e */
+	__u16 vesapm_off;	/* 0x30 */
+	__u16 pages;		/* 0x32 */
+	__u16 vesa_attributes;	/* 0x34 */
+	__u32 capabilities;     /* 0x36 */
+	__u8  _reserved[6];	/* 0x3a */
+} __attribute__((packed));
+
+#define VIDEO_TYPE_MDA		0x10	/* Monochrome Text Display	*/
+#define VIDEO_TYPE_CGA		0x11	/* CGA Display 			*/
+#define VIDEO_TYPE_EGAM		0x20	/* EGA/VGA in Monochrome Mode	*/
+#define VIDEO_TYPE_EGAC		0x21	/* EGA in Color Mode		*/
+#define VIDEO_TYPE_VGAC		0x22	/* VGA+ in Color Mode		*/
+#define VIDEO_TYPE_VLFB		0x23	/* VESA VGA in graphic mode	*/
+
+#define VIDEO_TYPE_PICA_S3	0x30	/* ACER PICA-61 local S3 video	*/
+#define VIDEO_TYPE_MIPS_G364	0x31    /* MIPS Magnum 4000 G364 video  */
+#define VIDEO_TYPE_SGI          0x33    /* Various SGI graphics hardware */
+
+#define VIDEO_TYPE_TGAC		0x40	/* DEC TGA */
+
+#define VIDEO_TYPE_SUN          0x50    /* Sun frame buffer. */
+#define VIDEO_TYPE_SUNPCI       0x51    /* Sun PCI based frame buffer. */
+
+#define VIDEO_TYPE_PMAC		0x60	/* PowerMacintosh frame buffer. */
+
+#define VIDEO_TYPE_EFI		0x70	/* EFI graphic mode		*/
+
+#define VIDEO_FLAGS_NOCURSOR	(1 << 0) /* The video mode has no cursor set */
+
+#define VIDEO_CAPABILITY_SKIP_QUIRKS	(1 << 0)
+
+
+#endif /* _UAPI_SCREEN_INFO_H */
diff --git a/include/uapi/linux/sdla.h b/include/uapi/linux/sdla.h
new file mode 100644
index 00000000000..95eaff9c9e4
--- /dev/null
+++ b/include/uapi/linux/sdla.h
@@ -0,0 +1,116 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for the Frame relay interface.
+ *
+ * Version:	@(#)if_ifrad.h	0.20	13 Apr 96
+ *
+ * Author:	Mike McLagan <mike.mclagan@linux.org>
+ *
+ * Changes:
+ *		0.15	Mike McLagan	Structure packing
+ *
+ *		0.20	Mike McLagan	New flags for S508 buffer handling
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _UAPISDLA_H
+#define _UAPISDLA_H
+
+/* adapter type */
+#define SDLA_TYPES
+#define SDLA_S502A			5020
+#define SDLA_S502E			5021
+#define SDLA_S503			5030
+#define SDLA_S507			5070
+#define SDLA_S508			5080
+#define SDLA_S509			5090
+#define SDLA_UNKNOWN			-1
+
+/* port selection flags for the S508 */
+#define SDLA_S508_PORT_V35		0x00
+#define SDLA_S508_PORT_RS232		0x02
+
+/* Z80 CPU speeds */
+#define SDLA_CPU_3M			0x00
+#define SDLA_CPU_5M			0x01
+#define SDLA_CPU_7M			0x02
+#define SDLA_CPU_8M			0x03
+#define SDLA_CPU_10M			0x04
+#define SDLA_CPU_16M			0x05
+#define SDLA_CPU_12M			0x06
+
+/* some private IOCTLs */
+#define SDLA_IDENTIFY			(FRAD_LAST_IOCTL + 1)
+#define SDLA_CPUSPEED			(FRAD_LAST_IOCTL + 2)
+#define SDLA_PROTOCOL			(FRAD_LAST_IOCTL + 3)
+
+#define SDLA_CLEARMEM			(FRAD_LAST_IOCTL + 4)
+#define SDLA_WRITEMEM			(FRAD_LAST_IOCTL + 5)
+#define SDLA_READMEM			(FRAD_LAST_IOCTL + 6)
+
+struct sdla_mem {
+   int  addr;
+   int  len;
+   void __user *data;
+};
+
+#define SDLA_START			(FRAD_LAST_IOCTL + 7)
+#define SDLA_STOP			(FRAD_LAST_IOCTL + 8)
+
+/* some offsets in the Z80's memory space */
+#define SDLA_NMIADDR			0x0000
+#define SDLA_CONF_ADDR			0x0010
+#define SDLA_S502A_NMIADDR		0x0066
+#define SDLA_CODE_BASEADDR		0x0100
+#define SDLA_WINDOW_SIZE		0x2000
+#define SDLA_ADDR_MASK			0x1FFF
+
+/* largest handleable block of data */
+#define SDLA_MAX_DATA			4080
+#define SDLA_MAX_MTU			4072	/* MAX_DATA - sizeof(fradhdr) */
+#define SDLA_MAX_DLCI			24
+
+/* this should be the same as frad_conf */
+struct sdla_conf {
+   short station;
+   short config;
+   short kbaud;
+   short clocking;
+   short max_frm;
+   short T391;
+   short T392;
+   short N391;
+   short N392;
+   short N393;
+   short CIR_fwd;
+   short Bc_fwd;
+   short Be_fwd;
+   short CIR_bwd;
+   short Bc_bwd;
+   short Be_bwd;
+};
+
+/* this should be the same as dlci_conf */
+struct sdla_dlci_conf {
+   short config;
+   short CIR_fwd;
+   short Bc_fwd;
+   short Be_fwd;
+   short CIR_bwd;
+   short Bc_bwd;
+   short Be_bwd; 
+   short Tc_fwd;
+   short Tc_bwd;
+   short Tf_max;
+   short Tb_max;
+};
+
+
+#endif /* _UAPISDLA_H */
diff --git a/include/uapi/linux/seccomp.h b/include/uapi/linux/seccomp.h
new file mode 100644
index 00000000000..ac2dc9f7297
--- /dev/null
+++ b/include/uapi/linux/seccomp.h
@@ -0,0 +1,47 @@
+#ifndef _UAPI_LINUX_SECCOMP_H
+#define _UAPI_LINUX_SECCOMP_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+
+/* Valid values for seccomp.mode and prctl(PR_SET_SECCOMP, <mode>) */
+#define SECCOMP_MODE_DISABLED	0 /* seccomp is not in use. */
+#define SECCOMP_MODE_STRICT	1 /* uses hard-coded filter. */
+#define SECCOMP_MODE_FILTER	2 /* uses user-supplied filter. */
+
+/*
+ * All BPF programs must return a 32-bit value.
+ * The bottom 16-bits are for optional return data.
+ * The upper 16-bits are ordered from least permissive values to most.
+ *
+ * The ordering ensures that a min_t() over composed return values always
+ * selects the least permissive choice.
+ */
+#define SECCOMP_RET_KILL	0x00000000U /* kill the task immediately */
+#define SECCOMP_RET_TRAP	0x00030000U /* disallow and force a SIGSYS */
+#define SECCOMP_RET_ERRNO	0x00050000U /* returns an errno */
+#define SECCOMP_RET_TRACE	0x7ff00000U /* pass to a tracer or disallow */
+#define SECCOMP_RET_ALLOW	0x7fff0000U /* allow */
+
+/* Masks for the return value sections. */
+#define SECCOMP_RET_ACTION	0x7fff0000U
+#define SECCOMP_RET_DATA	0x0000ffffU
+
+/**
+ * struct seccomp_data - the format the BPF program executes over.
+ * @nr: the system call number
+ * @arch: indicates system call convention as an AUDIT_ARCH_* value
+ *        as defined in <linux/audit.h>.
+ * @instruction_pointer: at the time of the system call.
+ * @args: up to 6 system call arguments always stored as 64-bit values
+ *        regardless of the architecture.
+ */
+struct seccomp_data {
+	int nr;
+	__u32 arch;
+	__u64 instruction_pointer;
+	__u64 args[6];
+};
+
+#endif /* _UAPI_LINUX_SECCOMP_H */
diff --git a/include/uapi/linux/securebits.h b/include/uapi/linux/securebits.h
new file mode 100644
index 00000000000..985aac9e6bf
--- /dev/null
+++ b/include/uapi/linux/securebits.h
@@ -0,0 +1,51 @@
+#ifndef _UAPI_LINUX_SECUREBITS_H
+#define _UAPI_LINUX_SECUREBITS_H
+
+/* Each securesetting is implemented using two bits. One bit specifies
+   whether the setting is on or off. The other bit specify whether the
+   setting is locked or not. A setting which is locked cannot be
+   changed from user-level. */
+#define issecure_mask(X)	(1 << (X))
+
+#define SECUREBITS_DEFAULT 0x00000000
+
+/* When set UID 0 has no special privileges. When unset, we support
+   inheritance of root-permissions and suid-root executable under
+   compatibility mode. We raise the effective and inheritable bitmasks
+   *of the executable file* if the effective uid of the new process is
+   0. If the real uid is 0, we raise the effective (legacy) bit of the
+   executable file. */
+#define SECURE_NOROOT			0
+#define SECURE_NOROOT_LOCKED		1  /* make bit-0 immutable */
+
+#define SECBIT_NOROOT		(issecure_mask(SECURE_NOROOT))
+#define SECBIT_NOROOT_LOCKED	(issecure_mask(SECURE_NOROOT_LOCKED))
+
+/* When set, setuid to/from uid 0 does not trigger capability-"fixup".
+   When unset, to provide compatiblility with old programs relying on
+   set*uid to gain/lose privilege, transitions to/from uid 0 cause
+   capabilities to be gained/lost. */
+#define SECURE_NO_SETUID_FIXUP		2
+#define SECURE_NO_SETUID_FIXUP_LOCKED	3  /* make bit-2 immutable */
+
+#define SECBIT_NO_SETUID_FIXUP	(issecure_mask(SECURE_NO_SETUID_FIXUP))
+#define SECBIT_NO_SETUID_FIXUP_LOCKED \
+			(issecure_mask(SECURE_NO_SETUID_FIXUP_LOCKED))
+
+/* When set, a process can retain its capabilities even after
+   transitioning to a non-root user (the set-uid fixup suppressed by
+   bit 2). Bit-4 is cleared when a process calls exec(); setting both
+   bit 4 and 5 will create a barrier through exec that no exec()'d
+   child can use this feature again. */
+#define SECURE_KEEP_CAPS		4
+#define SECURE_KEEP_CAPS_LOCKED		5  /* make bit-4 immutable */
+
+#define SECBIT_KEEP_CAPS	(issecure_mask(SECURE_KEEP_CAPS))
+#define SECBIT_KEEP_CAPS_LOCKED (issecure_mask(SECURE_KEEP_CAPS_LOCKED))
+
+#define SECURE_ALL_BITS		(issecure_mask(SECURE_NOROOT) | \
+				 issecure_mask(SECURE_NO_SETUID_FIXUP) | \
+				 issecure_mask(SECURE_KEEP_CAPS))
+#define SECURE_ALL_LOCKS	(SECURE_ALL_BITS << 1)
+
+#endif /* _UAPI_LINUX_SECUREBITS_H */
diff --git a/include/uapi/linux/selinux_netlink.h b/include/uapi/linux/selinux_netlink.h
new file mode 100644
index 00000000000..d239797785c
--- /dev/null
+++ b/include/uapi/linux/selinux_netlink.h
@@ -0,0 +1,50 @@
+/*
+ * Netlink event notifications for SELinux.
+ *
+ * Author: James Morris <jmorris@redhat.com>
+ *
+ * Copyright (C) 2004 Red Hat, Inc., James Morris <jmorris@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2,
+ * as published by the Free Software Foundation.
+ */
+#ifndef _LINUX_SELINUX_NETLINK_H
+#define _LINUX_SELINUX_NETLINK_H
+
+#include <linux/types.h>
+
+/* Message types. */
+#define SELNL_MSG_BASE 0x10
+enum {
+	SELNL_MSG_SETENFORCE = SELNL_MSG_BASE,
+	SELNL_MSG_POLICYLOAD,
+	SELNL_MSG_MAX
+};
+
+#ifndef __KERNEL__
+/* Multicast groups - backwards compatiblility for userspace */
+#define SELNL_GRP_NONE		0x00000000
+#define SELNL_GRP_AVC		0x00000001	/* AVC notifications */
+#define SELNL_GRP_ALL		0xffffffff
+#endif
+
+enum selinux_nlgroups {
+	SELNLGRP_NONE,
+#define SELNLGRP_NONE	SELNLGRP_NONE
+	SELNLGRP_AVC,
+#define SELNLGRP_AVC	SELNLGRP_AVC
+	__SELNLGRP_MAX
+};
+#define SELNLGRP_MAX	(__SELNLGRP_MAX - 1)
+
+/* Message structures */
+struct selnl_msg_setenforce {
+	__s32		val;
+};
+
+struct selnl_msg_policyload {
+	__u32	seqno;
+};
+
+#endif /* _LINUX_SELINUX_NETLINK_H */
diff --git a/include/uapi/linux/sem.h b/include/uapi/linux/sem.h
new file mode 100644
index 00000000000..541fce03b50
--- /dev/null
+++ b/include/uapi/linux/sem.h
@@ -0,0 +1,80 @@
+#ifndef _UAPI_LINUX_SEM_H
+#define _UAPI_LINUX_SEM_H
+
+#include <linux/ipc.h>
+
+/* semop flags */
+#define SEM_UNDO        0x1000  /* undo the operation on exit */
+
+/* semctl Command Definitions. */
+#define GETPID  11       /* get sempid */
+#define GETVAL  12       /* get semval */
+#define GETALL  13       /* get all semval's */
+#define GETNCNT 14       /* get semncnt */
+#define GETZCNT 15       /* get semzcnt */
+#define SETVAL  16       /* set semval */
+#define SETALL  17       /* set all semval's */
+
+/* ipcs ctl cmds */
+#define SEM_STAT 18
+#define SEM_INFO 19
+
+/* Obsolete, used only for backwards compatibility and libc5 compiles */
+struct semid_ds {
+	struct ipc_perm	sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+	__kernel_time_t	sem_ctime;		/* last change time */
+	struct sem	*sem_base;		/* ptr to first semaphore in array */
+	struct sem_queue *sem_pending;		/* pending operations to be processed */
+	struct sem_queue **sem_pending_last;	/* last pending operation */
+	struct sem_undo	*undo;			/* undo requests on this array */
+	unsigned short	sem_nsems;		/* no. of semaphores in array */
+};
+
+/* Include the definition of semid64_ds */
+#include <asm/sembuf.h>
+
+/* semop system calls takes an array of these. */
+struct sembuf {
+	unsigned short  sem_num;	/* semaphore index in array */
+	short		sem_op;		/* semaphore operation */
+	short		sem_flg;	/* operation flags */
+};
+
+/* arg for semctl system calls. */
+union semun {
+	int val;			/* value for SETVAL */
+	struct semid_ds __user *buf;	/* buffer for IPC_STAT & IPC_SET */
+	unsigned short __user *array;	/* array for GETALL & SETALL */
+	struct seminfo __user *__buf;	/* buffer for IPC_INFO */
+	void __user *__pad;
+};
+
+struct  seminfo {
+	int semmap;
+	int semmni;
+	int semmns;
+	int semmnu;
+	int semmsl;
+	int semopm;
+	int semume;
+	int semusz;
+	int semvmx;
+	int semaem;
+};
+
+#define SEMMNI  128             /* <= IPCMNI  max # of semaphore identifiers */
+#define SEMMSL  250             /* <= 8 000 max num of semaphores per id */
+#define SEMMNS  (SEMMNI*SEMMSL) /* <= INT_MAX max # of semaphores in system */
+#define SEMOPM  32	        /* <= 1 000 max num of ops per semop call */
+#define SEMVMX  32767           /* <= 32767 semaphore maximum value */
+#define SEMAEM  SEMVMX          /* adjust on exit max value */
+
+/* unused */
+#define SEMUME  SEMOPM          /* max num of undo entries per process */
+#define SEMMNU  SEMMNS          /* num of undo structures system wide */
+#define SEMMAP  SEMMNS          /* # of entries in semaphore map */
+#define SEMUSZ  20		/* sizeof struct sem_undo */
+
+
+#endif /* _UAPI_LINUX_SEM_H */
diff --git a/include/uapi/linux/serial.h b/include/uapi/linux/serial.h
new file mode 100644
index 00000000000..5e0d0ed61cf
--- /dev/null
+++ b/include/uapi/linux/serial.h
@@ -0,0 +1,126 @@
+/*
+ * include/linux/serial.h
+ *
+ * Copyright (C) 1992 by Theodore Ts'o.
+ * 
+ * Redistribution of this file is permitted under the terms of the GNU 
+ * Public License (GPL)
+ */
+
+#ifndef _UAPI_LINUX_SERIAL_H
+#define _UAPI_LINUX_SERIAL_H
+
+#include <linux/types.h>
+
+#include <linux/tty_flags.h>
+
+
+struct serial_struct {
+	int	type;
+	int	line;
+	unsigned int	port;
+	int	irq;
+	int	flags;
+	int	xmit_fifo_size;
+	int	custom_divisor;
+	int	baud_base;
+	unsigned short	close_delay;
+	char	io_type;
+	char	reserved_char[1];
+	int	hub6;
+	unsigned short	closing_wait; /* time to wait before closing */
+	unsigned short	closing_wait2; /* no longer used... */
+	unsigned char	*iomem_base;
+	unsigned short	iomem_reg_shift;
+	unsigned int	port_high;
+	unsigned long	iomap_base;	/* cookie passed into ioremap */
+};
+
+/*
+ * For the close wait times, 0 means wait forever for serial port to
+ * flush its output.  65535 means don't wait at all.
+ */
+#define ASYNC_CLOSING_WAIT_INF	0
+#define ASYNC_CLOSING_WAIT_NONE	65535
+
+/*
+ * These are the supported serial types.
+ */
+#define PORT_UNKNOWN	0
+#define PORT_8250	1
+#define PORT_16450	2
+#define PORT_16550	3
+#define PORT_16550A	4
+#define PORT_CIRRUS     5	/* usurped by cyclades.c */
+#define PORT_16650	6
+#define PORT_16650V2	7
+#define PORT_16750	8
+#define PORT_STARTECH	9	/* usurped by cyclades.c */
+#define PORT_16C950	10	/* Oxford Semiconductor */
+#define PORT_16654	11
+#define PORT_16850	12
+#define PORT_RSA	13	/* RSA-DV II/S card */
+#define PORT_MAX	13
+
+#define SERIAL_IO_PORT	0
+#define SERIAL_IO_HUB6	1
+#define SERIAL_IO_MEM	2
+
+#define UART_CLEAR_FIFO		0x01
+#define UART_USE_FIFO		0x02
+#define UART_STARTECH		0x04
+#define UART_NATSEMI		0x08
+
+
+/*
+ * Multiport serial configuration structure --- external structure
+ */
+struct serial_multiport_struct {
+	int		irq;
+	int		port1;
+	unsigned char	mask1, match1;
+	int		port2;
+	unsigned char	mask2, match2;
+	int		port3;
+	unsigned char	mask3, match3;
+	int		port4;
+	unsigned char	mask4, match4;
+	int		port_monitor;
+	int	reserved[32];
+};
+
+/*
+ * Serial input interrupt line counters -- external structure
+ * Four lines can interrupt: CTS, DSR, RI, DCD
+ */
+struct serial_icounter_struct {
+	int cts, dsr, rng, dcd;
+	int rx, tx;
+	int frame, overrun, parity, brk;
+	int buf_overrun;
+	int reserved[9];
+};
+
+/*
+ * Serial interface for controlling RS485 settings on chips with suitable
+ * support. Set with TIOCSRS485 and get with TIOCGRS485 if supported by your
+ * platform. The set function returns the new state, with any unsupported bits
+ * reverted appropriately.
+ */
+
+struct serial_rs485 {
+	__u32	flags;			/* RS485 feature flags */
+#define SER_RS485_ENABLED		(1 << 0)	/* If enabled */
+#define SER_RS485_RTS_ON_SEND		(1 << 1)	/* Logical level for
+							   RTS pin when
+							   sending */
+#define SER_RS485_RTS_AFTER_SEND	(1 << 2)	/* Logical level for
+							   RTS pin after sent*/
+#define SER_RS485_RX_DURING_TX		(1 << 4)
+	__u32	delay_rts_before_send;	/* Delay before send (milliseconds) */
+	__u32	delay_rts_after_send;	/* Delay after send (milliseconds) */
+	__u32	padding[5];		/* Memory is cheap, new structs
+					   are a royal PITA .. */
+};
+
+#endif /* _UAPI_LINUX_SERIAL_H */
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
new file mode 100644
index 00000000000..7e1ab20adc0
--- /dev/null
+++ b/include/uapi/linux/serial_core.h
@@ -0,0 +1,219 @@
+/*
+ *  linux/drivers/char/serial_core.h
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef _UAPILINUX_SERIAL_CORE_H
+#define _UAPILINUX_SERIAL_CORE_H
+
+#include <linux/serial.h>
+
+/*
+ * The type definitions.  These are from Ted Ts'o's serial.h
+ */
+#define PORT_UNKNOWN	0
+#define PORT_8250	1
+#define PORT_16450	2
+#define PORT_16550	3
+#define PORT_16550A	4
+#define PORT_CIRRUS	5
+#define PORT_16650	6
+#define PORT_16650V2	7
+#define PORT_16750	8
+#define PORT_STARTECH	9
+#define PORT_16C950	10
+#define PORT_16654	11
+#define PORT_16850	12
+#define PORT_RSA	13
+#define PORT_NS16550A	14
+#define PORT_XSCALE	15
+#define PORT_RM9000	16	/* PMC-Sierra RM9xxx internal UART */
+#define PORT_OCTEON	17	/* Cavium OCTEON internal UART */
+#define PORT_AR7	18	/* Texas Instruments AR7 internal UART */
+#define PORT_U6_16550A	19	/* ST-Ericsson U6xxx internal UART */
+#define PORT_TEGRA	20	/* NVIDIA Tegra internal UART */
+#define PORT_XR17D15X	21	/* Exar XR17D15x UART */
+#define PORT_LPC3220	22	/* NXP LPC32xx SoC "Standard" UART */
+#define PORT_8250_CIR	23	/* CIR infrared port, has its own driver */
+#define PORT_MAX_8250	23	/* max port ID */
+
+/*
+ * ARM specific type numbers.  These are not currently guaranteed
+ * to be implemented, and will change in the future.  These are
+ * separate so any additions to the old serial.c that occur before
+ * we are merged can be easily merged here.
+ */
+#define PORT_PXA	31
+#define PORT_AMBA	32
+#define PORT_CLPS711X	33
+#define PORT_SA1100	34
+#define PORT_UART00	35
+#define PORT_21285	37
+
+/* Sparc type numbers.  */
+#define PORT_SUNZILOG	38
+#define PORT_SUNSAB	39
+
+/* DEC */
+#define PORT_DZ		46
+#define PORT_ZS		47
+
+/* Parisc type numbers. */
+#define PORT_MUX	48
+
+/* Atmel AT91 / AT32 SoC */
+#define PORT_ATMEL	49
+
+/* Macintosh Zilog type numbers */
+#define PORT_MAC_ZILOG	50	/* m68k : not yet implemented */
+#define PORT_PMAC_ZILOG	51
+
+/* SH-SCI */
+#define PORT_SCI	52
+#define PORT_SCIF	53
+#define PORT_IRDA	54
+
+/* Samsung S3C2410 SoC and derivatives thereof */
+#define PORT_S3C2410    55
+
+/* SGI IP22 aka Indy / Challenge S / Indigo 2 */
+#define PORT_IP22ZILOG	56
+
+/* Sharp LH7a40x -- an ARM9 SoC series */
+#define PORT_LH7A40X	57
+
+/* PPC CPM type number */
+#define PORT_CPM        58
+
+/* MPC52xx (and MPC512x) type numbers */
+#define PORT_MPC52xx	59
+
+/* IBM icom */
+#define PORT_ICOM	60
+
+/* Samsung S3C2440 SoC */
+#define PORT_S3C2440	61
+
+/* Motorola i.MX SoC */
+#define PORT_IMX	62
+
+/* Marvell MPSC */
+#define PORT_MPSC	63
+
+/* TXX9 type number */
+#define PORT_TXX9	64
+
+/* NEC VR4100 series SIU/DSIU */
+#define PORT_VR41XX_SIU		65
+#define PORT_VR41XX_DSIU	66
+
+/* Samsung S3C2400 SoC */
+#define PORT_S3C2400	67
+
+/* M32R SIO */
+#define PORT_M32R_SIO	68
+
+/*Digi jsm */
+#define PORT_JSM        69
+
+#define PORT_PNX8XXX	70
+
+/* Hilscher netx */
+#define PORT_NETX	71
+
+/* SUN4V Hypervisor Console */
+#define PORT_SUNHV	72
+
+#define PORT_S3C2412	73
+
+/* Xilinx uartlite */
+#define PORT_UARTLITE	74
+
+/* Blackfin bf5xx */
+#define PORT_BFIN	75
+
+/* Micrel KS8695 */
+#define PORT_KS8695	76
+
+/* Broadcom SB1250, etc. SOC */
+#define PORT_SB1250_DUART	77
+
+/* Freescale ColdFire */
+#define PORT_MCF	78
+
+/* Blackfin SPORT */
+#define PORT_BFIN_SPORT		79
+
+/* MN10300 on-chip UART numbers */
+#define PORT_MN10300		80
+#define PORT_MN10300_CTS	81
+
+#define PORT_SC26XX	82
+
+/* SH-SCI */
+#define PORT_SCIFA	83
+
+#define PORT_S3C6400	84
+
+/* NWPSERIAL */
+#define PORT_NWPSERIAL	85
+
+/* MAX3100 */
+#define PORT_MAX3100    86
+
+/* Timberdale UART */
+#define PORT_TIMBUART	87
+
+/* Qualcomm MSM SoCs */
+#define PORT_MSM	88
+
+/* BCM63xx family SoCs */
+#define PORT_BCM63XX	89
+
+/* Aeroflex Gaisler GRLIB APBUART */
+#define PORT_APBUART    90
+
+/* Altera UARTs */
+#define PORT_ALTERA_JTAGUART	91
+#define PORT_ALTERA_UART	92
+
+/* SH-SCI */
+#define PORT_SCIFB	93
+
+/* MAX310X */
+#define PORT_MAX310X	94
+
+/* High Speed UART for Medfield */
+#define PORT_MFD	95
+
+/* TI OMAP-UART */
+#define PORT_OMAP	96
+
+/* VIA VT8500 SoC */
+#define PORT_VT8500	97
+
+/* Xilinx PSS UART */
+#define PORT_XUARTPS	98
+
+/* Atheros AR933X SoC */
+#define PORT_AR933X	99
+
+/* Energy Micro efm32 SoC */
+#define PORT_EFMUART   100
+
+
+#endif /* _UAPILINUX_SERIAL_CORE_H */
diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h
new file mode 100644
index 00000000000..5ed325e88a8
--- /dev/null
+++ b/include/uapi/linux/serial_reg.h
@@ -0,0 +1,371 @@
+/*
+ * include/linux/serial_reg.h
+ *
+ * Copyright (C) 1992, 1994 by Theodore Ts'o.
+ * 
+ * Redistribution of this file is permitted under the terms of the GNU 
+ * Public License (GPL)
+ * 
+ * These are the UART port assignments, expressed as offsets from the base
+ * register.  These assignments should hold for any serial port based on
+ * a 8250, 16450, or 16550(A).
+ */
+
+#ifndef _LINUX_SERIAL_REG_H
+#define _LINUX_SERIAL_REG_H
+
+/*
+ * DLAB=0
+ */
+#define UART_RX		0	/* In:  Receive buffer */
+#define UART_TX		0	/* Out: Transmit buffer */
+
+#define UART_IER	1	/* Out: Interrupt Enable Register */
+#define UART_IER_MSI		0x08 /* Enable Modem status interrupt */
+#define UART_IER_RLSI		0x04 /* Enable receiver line status interrupt */
+#define UART_IER_THRI		0x02 /* Enable Transmitter holding register int. */
+#define UART_IER_RDI		0x01 /* Enable receiver data interrupt */
+/*
+ * Sleep mode for ST16650 and TI16750.  For the ST16650, EFR[4]=1
+ */
+#define UART_IERX_SLEEP		0x10 /* Enable sleep mode */
+
+#define UART_IIR	2	/* In:  Interrupt ID Register */
+#define UART_IIR_NO_INT		0x01 /* No interrupts pending */
+#define UART_IIR_ID		0x06 /* Mask for the interrupt ID */
+#define UART_IIR_MSI		0x00 /* Modem status interrupt */
+#define UART_IIR_THRI		0x02 /* Transmitter holding register empty */
+#define UART_IIR_RDI		0x04 /* Receiver data interrupt */
+#define UART_IIR_RLSI		0x06 /* Receiver line status interrupt */
+
+#define UART_IIR_BUSY		0x07 /* DesignWare APB Busy Detect */
+
+#define UART_IIR_RX_TIMEOUT	0x0c /* OMAP RX Timeout interrupt */
+#define UART_IIR_XOFF		0x10 /* OMAP XOFF/Special Character */
+#define UART_IIR_CTS_RTS_DSR	0x20 /* OMAP CTS/RTS/DSR Change */
+
+#define UART_FCR	2	/* Out: FIFO Control Register */
+#define UART_FCR_ENABLE_FIFO	0x01 /* Enable the FIFO */
+#define UART_FCR_CLEAR_RCVR	0x02 /* Clear the RCVR FIFO */
+#define UART_FCR_CLEAR_XMIT	0x04 /* Clear the XMIT FIFO */
+#define UART_FCR_DMA_SELECT	0x08 /* For DMA applications */
+/*
+ * Note: The FIFO trigger levels are chip specific:
+ *	RX:76 = 00  01  10  11	TX:54 = 00  01  10  11
+ * PC16550D:	 1   4   8  14		xx  xx  xx  xx
+ * TI16C550A:	 1   4   8  14          xx  xx  xx  xx
+ * TI16C550C:	 1   4   8  14          xx  xx  xx  xx
+ * ST16C550:	 1   4   8  14		xx  xx  xx  xx
+ * ST16C650:	 8  16  24  28		16   8  24  30	PORT_16650V2
+ * NS16C552:	 1   4   8  14		xx  xx  xx  xx
+ * ST16C654:	 8  16  56  60		 8  16  32  56	PORT_16654
+ * TI16C750:	 1  16  32  56		xx  xx  xx  xx	PORT_16750
+ * TI16C752:	 8  16  56  60		 8  16  32  56
+ * Tegra:	 1   4   8  14		16   8   4   1	PORT_TEGRA
+ */
+#define UART_FCR_R_TRIG_00	0x00
+#define UART_FCR_R_TRIG_01	0x40
+#define UART_FCR_R_TRIG_10	0x80
+#define UART_FCR_R_TRIG_11	0xc0
+#define UART_FCR_T_TRIG_00	0x00
+#define UART_FCR_T_TRIG_01	0x10
+#define UART_FCR_T_TRIG_10	0x20
+#define UART_FCR_T_TRIG_11	0x30
+
+#define UART_FCR_TRIGGER_MASK	0xC0 /* Mask for the FIFO trigger range */
+#define UART_FCR_TRIGGER_1	0x00 /* Mask for trigger set at 1 */
+#define UART_FCR_TRIGGER_4	0x40 /* Mask for trigger set at 4 */
+#define UART_FCR_TRIGGER_8	0x80 /* Mask for trigger set at 8 */
+#define UART_FCR_TRIGGER_14	0xC0 /* Mask for trigger set at 14 */
+/* 16650 definitions */
+#define UART_FCR6_R_TRIGGER_8	0x00 /* Mask for receive trigger set at 1 */
+#define UART_FCR6_R_TRIGGER_16	0x40 /* Mask for receive trigger set at 4 */
+#define UART_FCR6_R_TRIGGER_24  0x80 /* Mask for receive trigger set at 8 */
+#define UART_FCR6_R_TRIGGER_28	0xC0 /* Mask for receive trigger set at 14 */
+#define UART_FCR6_T_TRIGGER_16	0x00 /* Mask for transmit trigger set at 16 */
+#define UART_FCR6_T_TRIGGER_8	0x10 /* Mask for transmit trigger set at 8 */
+#define UART_FCR6_T_TRIGGER_24  0x20 /* Mask for transmit trigger set at 24 */
+#define UART_FCR6_T_TRIGGER_30	0x30 /* Mask for transmit trigger set at 30 */
+#define UART_FCR7_64BYTE	0x20 /* Go into 64 byte mode (TI16C750) */
+
+#define UART_LCR	3	/* Out: Line Control Register */
+/*
+ * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting 
+ * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits.
+ */
+#define UART_LCR_DLAB		0x80 /* Divisor latch access bit */
+#define UART_LCR_SBC		0x40 /* Set break control */
+#define UART_LCR_SPAR		0x20 /* Stick parity (?) */
+#define UART_LCR_EPAR		0x10 /* Even parity select */
+#define UART_LCR_PARITY		0x08 /* Parity Enable */
+#define UART_LCR_STOP		0x04 /* Stop bits: 0=1 bit, 1=2 bits */
+#define UART_LCR_WLEN5		0x00 /* Wordlength: 5 bits */
+#define UART_LCR_WLEN6		0x01 /* Wordlength: 6 bits */
+#define UART_LCR_WLEN7		0x02 /* Wordlength: 7 bits */
+#define UART_LCR_WLEN8		0x03 /* Wordlength: 8 bits */
+
+/*
+ * Access to some registers depends on register access / configuration
+ * mode.
+ */
+#define UART_LCR_CONF_MODE_A	UART_LCR_DLAB	/* Configutation mode A */
+#define UART_LCR_CONF_MODE_B	0xBF		/* Configutation mode B */
+
+#define UART_MCR	4	/* Out: Modem Control Register */
+#define UART_MCR_CLKSEL		0x80 /* Divide clock by 4 (TI16C752, EFR[4]=1) */
+#define UART_MCR_TCRTLR		0x40 /* Access TCR/TLR (TI16C752, EFR[4]=1) */
+#define UART_MCR_XONANY		0x20 /* Enable Xon Any (TI16C752, EFR[4]=1) */
+#define UART_MCR_AFE		0x20 /* Enable auto-RTS/CTS (TI16C550C/TI16C750) */
+#define UART_MCR_LOOP		0x10 /* Enable loopback test mode */
+#define UART_MCR_OUT2		0x08 /* Out2 complement */
+#define UART_MCR_OUT1		0x04 /* Out1 complement */
+#define UART_MCR_RTS		0x02 /* RTS complement */
+#define UART_MCR_DTR		0x01 /* DTR complement */
+
+#define UART_LSR	5	/* In:  Line Status Register */
+#define UART_LSR_FIFOE		0x80 /* Fifo error */
+#define UART_LSR_TEMT		0x40 /* Transmitter empty */
+#define UART_LSR_THRE		0x20 /* Transmit-hold-register empty */
+#define UART_LSR_BI		0x10 /* Break interrupt indicator */
+#define UART_LSR_FE		0x08 /* Frame error indicator */
+#define UART_LSR_PE		0x04 /* Parity error indicator */
+#define UART_LSR_OE		0x02 /* Overrun error indicator */
+#define UART_LSR_DR		0x01 /* Receiver data ready */
+#define UART_LSR_BRK_ERROR_BITS	0x1E /* BI, FE, PE, OE bits */
+
+#define UART_MSR	6	/* In:  Modem Status Register */
+#define UART_MSR_DCD		0x80 /* Data Carrier Detect */
+#define UART_MSR_RI		0x40 /* Ring Indicator */
+#define UART_MSR_DSR		0x20 /* Data Set Ready */
+#define UART_MSR_CTS		0x10 /* Clear to Send */
+#define UART_MSR_DDCD		0x08 /* Delta DCD */
+#define UART_MSR_TERI		0x04 /* Trailing edge ring indicator */
+#define UART_MSR_DDSR		0x02 /* Delta DSR */
+#define UART_MSR_DCTS		0x01 /* Delta CTS */
+#define UART_MSR_ANY_DELTA	0x0F /* Any of the delta bits! */
+
+#define UART_SCR	7	/* I/O: Scratch Register */
+
+/*
+ * DLAB=1
+ */
+#define UART_DLL	0	/* Out: Divisor Latch Low */
+#define UART_DLM	1	/* Out: Divisor Latch High */
+
+/*
+ * LCR=0xBF (or DLAB=1 for 16C660)
+ */
+#define UART_EFR	2	/* I/O: Extended Features Register */
+#define UART_XR_EFR	9	/* I/O: Extended Features Register (XR17D15x) */
+#define UART_EFR_CTS		0x80 /* CTS flow control */
+#define UART_EFR_RTS		0x40 /* RTS flow control */
+#define UART_EFR_SCD		0x20 /* Special character detect */
+#define UART_EFR_ECB		0x10 /* Enhanced control bit */
+/*
+ * the low four bits control software flow control
+ */
+
+/*
+ * LCR=0xBF, TI16C752, ST16650, ST16650A, ST16654
+ */
+#define UART_XON1	4	/* I/O: Xon character 1 */
+#define UART_XON2	5	/* I/O: Xon character 2 */
+#define UART_XOFF1	6	/* I/O: Xoff character 1 */
+#define UART_XOFF2	7	/* I/O: Xoff character 2 */
+
+/*
+ * EFR[4]=1 MCR[6]=1, TI16C752
+ */
+#define UART_TI752_TCR	6	/* I/O: transmission control register */
+#define UART_TI752_TLR	7	/* I/O: trigger level register */
+
+/*
+ * LCR=0xBF, XR16C85x
+ */
+#define UART_TRG	0	/* FCTR bit 7 selects Rx or Tx
+				 * In: Fifo count
+				 * Out: Fifo custom trigger levels */
+/*
+ * These are the definitions for the Programmable Trigger Register
+ */
+#define UART_TRG_1		0x01
+#define UART_TRG_4		0x04
+#define UART_TRG_8		0x08
+#define UART_TRG_16		0x10
+#define UART_TRG_32		0x20
+#define UART_TRG_64		0x40
+#define UART_TRG_96		0x60
+#define UART_TRG_120		0x78
+#define UART_TRG_128		0x80
+
+#define UART_FCTR	1	/* Feature Control Register */
+#define UART_FCTR_RTS_NODELAY	0x00  /* RTS flow control delay */
+#define UART_FCTR_RTS_4DELAY	0x01
+#define UART_FCTR_RTS_6DELAY	0x02
+#define UART_FCTR_RTS_8DELAY	0x03
+#define UART_FCTR_IRDA		0x04  /* IrDa data encode select */
+#define UART_FCTR_TX_INT	0x08  /* Tx interrupt type select */
+#define UART_FCTR_TRGA		0x00  /* Tx/Rx 550 trigger table select */
+#define UART_FCTR_TRGB		0x10  /* Tx/Rx 650 trigger table select */
+#define UART_FCTR_TRGC		0x20  /* Tx/Rx 654 trigger table select */
+#define UART_FCTR_TRGD		0x30  /* Tx/Rx 850 programmable trigger select */
+#define UART_FCTR_SCR_SWAP	0x40  /* Scratch pad register swap */
+#define UART_FCTR_RX		0x00  /* Programmable trigger mode select */
+#define UART_FCTR_TX		0x80  /* Programmable trigger mode select */
+
+/*
+ * LCR=0xBF, FCTR[6]=1
+ */
+#define UART_EMSR	7	/* Extended Mode Select Register */
+#define UART_EMSR_FIFO_COUNT	0x01  /* Rx/Tx select */
+#define UART_EMSR_ALT_COUNT	0x02  /* Alternating count select */
+
+/*
+ * The Intel XScale on-chip UARTs define these bits
+ */
+#define UART_IER_DMAE	0x80	/* DMA Requests Enable */
+#define UART_IER_UUE	0x40	/* UART Unit Enable */
+#define UART_IER_NRZE	0x20	/* NRZ coding Enable */
+#define UART_IER_RTOIE	0x10	/* Receiver Time Out Interrupt Enable */
+
+#define UART_IIR_TOD	0x08	/* Character Timeout Indication Detected */
+
+#define UART_FCR_PXAR1	0x00	/* receive FIFO threshold = 1 */
+#define UART_FCR_PXAR8	0x40	/* receive FIFO threshold = 8 */
+#define UART_FCR_PXAR16	0x80	/* receive FIFO threshold = 16 */
+#define UART_FCR_PXAR32	0xc0	/* receive FIFO threshold = 32 */
+
+/*
+ * Intel MID on-chip HSU (High Speed UART) defined bits
+ */
+#define UART_FCR_HSU_64_1B	0x00	/* receive FIFO treshold = 1 */
+#define UART_FCR_HSU_64_16B	0x40	/* receive FIFO treshold = 16 */
+#define UART_FCR_HSU_64_32B	0x80	/* receive FIFO treshold = 32 */
+#define UART_FCR_HSU_64_56B	0xc0	/* receive FIFO treshold = 56 */
+
+#define UART_FCR_HSU_16_1B	0x00	/* receive FIFO treshold = 1 */
+#define UART_FCR_HSU_16_4B	0x40	/* receive FIFO treshold = 4 */
+#define UART_FCR_HSU_16_8B	0x80	/* receive FIFO treshold = 8 */
+#define UART_FCR_HSU_16_14B	0xc0	/* receive FIFO treshold = 14 */
+
+#define UART_FCR_HSU_64B_FIFO	0x20	/* chose 64 bytes FIFO */
+#define UART_FCR_HSU_16B_FIFO	0x00	/* chose 16 bytes FIFO */
+
+#define UART_FCR_HALF_EMPT_TXI	0x00	/* trigger TX_EMPT IRQ for half empty */
+#define UART_FCR_FULL_EMPT_TXI	0x08	/* trigger TX_EMPT IRQ for full empty */
+
+/*
+ * These register definitions are for the 16C950
+ */
+#define UART_ASR	0x01	/* Additional Status Register */
+#define UART_RFL	0x03	/* Receiver FIFO level */
+#define UART_TFL 	0x04	/* Transmitter FIFO level */
+#define UART_ICR	0x05	/* Index Control Register */
+
+/* The 16950 ICR registers */
+#define UART_ACR	0x00	/* Additional Control Register */
+#define UART_CPR	0x01	/* Clock Prescalar Register */
+#define UART_TCR	0x02	/* Times Clock Register */
+#define UART_CKS	0x03	/* Clock Select Register */
+#define UART_TTL	0x04	/* Transmitter Interrupt Trigger Level */
+#define UART_RTL	0x05	/* Receiver Interrupt Trigger Level */
+#define UART_FCL	0x06	/* Flow Control Level Lower */
+#define UART_FCH	0x07	/* Flow Control Level Higher */
+#define UART_ID1	0x08	/* ID #1 */
+#define UART_ID2	0x09	/* ID #2 */
+#define UART_ID3	0x0A	/* ID #3 */
+#define UART_REV	0x0B	/* Revision */
+#define UART_CSR	0x0C	/* Channel Software Reset */
+#define UART_NMR	0x0D	/* Nine-bit Mode Register */
+#define UART_CTR	0xFF
+
+/*
+ * The 16C950 Additional Control Register
+ */
+#define UART_ACR_RXDIS	0x01	/* Receiver disable */
+#define UART_ACR_TXDIS	0x02	/* Transmitter disable */
+#define UART_ACR_DSRFC	0x04	/* DSR Flow Control */
+#define UART_ACR_TLENB	0x20	/* 950 trigger levels enable */
+#define UART_ACR_ICRRD	0x40	/* ICR Read enable */
+#define UART_ACR_ASREN	0x80	/* Additional status enable */
+
+
+
+/*
+ * These definitions are for the RSA-DV II/S card, from
+ *
+ * Kiyokazu SUTO <suto@ks-and-ks.ne.jp>
+ */
+
+#define UART_RSA_BASE (-8)
+
+#define UART_RSA_MSR ((UART_RSA_BASE) + 0) /* I/O: Mode Select Register */
+
+#define UART_RSA_MSR_SWAP (1 << 0) /* Swap low/high 8 bytes in I/O port addr */
+#define UART_RSA_MSR_FIFO (1 << 2) /* Enable the external FIFO */
+#define UART_RSA_MSR_FLOW (1 << 3) /* Enable the auto RTS/CTS flow control */
+#define UART_RSA_MSR_ITYP (1 << 4) /* Level (1) / Edge triger (0) */
+
+#define UART_RSA_IER ((UART_RSA_BASE) + 1) /* I/O: Interrupt Enable Register */
+
+#define UART_RSA_IER_Rx_FIFO_H (1 << 0) /* Enable Rx FIFO half full int. */
+#define UART_RSA_IER_Tx_FIFO_H (1 << 1) /* Enable Tx FIFO half full int. */
+#define UART_RSA_IER_Tx_FIFO_E (1 << 2) /* Enable Tx FIFO empty int. */
+#define UART_RSA_IER_Rx_TOUT (1 << 3) /* Enable char receive timeout int */
+#define UART_RSA_IER_TIMER (1 << 4) /* Enable timer interrupt */
+
+#define UART_RSA_SRR ((UART_RSA_BASE) + 2) /* IN: Status Read Register */
+
+#define UART_RSA_SRR_Tx_FIFO_NEMP (1 << 0) /* Tx FIFO is not empty (1) */
+#define UART_RSA_SRR_Tx_FIFO_NHFL (1 << 1) /* Tx FIFO is not half full (1) */
+#define UART_RSA_SRR_Tx_FIFO_NFUL (1 << 2) /* Tx FIFO is not full (1) */
+#define UART_RSA_SRR_Rx_FIFO_NEMP (1 << 3) /* Rx FIFO is not empty (1) */
+#define UART_RSA_SRR_Rx_FIFO_NHFL (1 << 4) /* Rx FIFO is not half full (1) */
+#define UART_RSA_SRR_Rx_FIFO_NFUL (1 << 5) /* Rx FIFO is not full (1) */
+#define UART_RSA_SRR_Rx_TOUT (1 << 6) /* Character reception timeout occurred (1) */
+#define UART_RSA_SRR_TIMER (1 << 7) /* Timer interrupt occurred */
+
+#define UART_RSA_FRR ((UART_RSA_BASE) + 2) /* OUT: FIFO Reset Register */
+
+#define UART_RSA_TIVSR ((UART_RSA_BASE) + 3) /* I/O: Timer Interval Value Set Register */
+
+#define UART_RSA_TCR ((UART_RSA_BASE) + 4) /* OUT: Timer Control Register */
+
+#define UART_RSA_TCR_SWITCH (1 << 0) /* Timer on */
+
+/*
+ * The RSA DSV/II board has two fixed clock frequencies.  One is the
+ * standard rate, and the other is 8 times faster.
+ */
+#define SERIAL_RSA_BAUD_BASE (921600)
+#define SERIAL_RSA_BAUD_BASE_LO (SERIAL_RSA_BAUD_BASE / 8)
+
+/*
+ * Extra serial register definitions for the internal UARTs
+ * in TI OMAP processors.
+ */
+#define UART_OMAP_MDR1		0x08	/* Mode definition register */
+#define UART_OMAP_MDR2		0x09	/* Mode definition register 2 */
+#define UART_OMAP_SCR		0x10	/* Supplementary control register */
+#define UART_OMAP_SSR		0x11	/* Supplementary status register */
+#define UART_OMAP_EBLR		0x12	/* BOF length register */
+#define UART_OMAP_OSC_12M_SEL	0x13	/* OMAP1510 12MHz osc select */
+#define UART_OMAP_MVER		0x14	/* Module version register */
+#define UART_OMAP_SYSC		0x15	/* System configuration register */
+#define UART_OMAP_SYSS		0x16	/* System status register */
+#define UART_OMAP_WER		0x17	/* Wake-up enable register */
+
+/*
+ * These are the definitions for the MDR1 register
+ */
+#define UART_OMAP_MDR1_16X_MODE		0x00	/* UART 16x mode */
+#define UART_OMAP_MDR1_SIR_MODE		0x01	/* SIR mode */
+#define UART_OMAP_MDR1_16X_ABAUD_MODE	0x02	/* UART 16x auto-baud */
+#define UART_OMAP_MDR1_13X_MODE		0x03	/* UART 13x mode */
+#define UART_OMAP_MDR1_MIR_MODE		0x04	/* MIR mode */
+#define UART_OMAP_MDR1_FIR_MODE		0x05	/* FIR mode */
+#define UART_OMAP_MDR1_CIR_MODE		0x06	/* CIR mode */
+#define UART_OMAP_MDR1_DISABLE		0x07	/* Disable (default state) */
+
+#endif /* _LINUX_SERIAL_REG_H */
+
diff --git a/include/uapi/linux/serio.h b/include/uapi/linux/serio.h
new file mode 100644
index 00000000000..9f53fa7fc13
--- /dev/null
+++ b/include/uapi/linux/serio.h
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 1999-2002 Vojtech Pavlik
+*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef _UAPI_SERIO_H
+#define _UAPI_SERIO_H
+
+
+#include <linux/ioctl.h>
+
+#define SPIOCSTYPE	_IOW('q', 0x01, unsigned long)
+
+
+/*
+ * bit masks for use in "interrupt" flags (3rd argument)
+ */
+#define SERIO_TIMEOUT	1
+#define SERIO_PARITY	2
+#define SERIO_FRAME	4
+
+/*
+ * Serio types
+ */
+#define SERIO_XT	0x00
+#define SERIO_8042	0x01
+#define SERIO_RS232	0x02
+#define SERIO_HIL_MLC	0x03
+#define SERIO_PS_PSTHRU	0x05
+#define SERIO_8042_XL	0x06
+
+/*
+ * Serio protocols
+ */
+#define SERIO_UNKNOWN	0x00
+#define SERIO_MSC	0x01
+#define SERIO_SUN	0x02
+#define SERIO_MS	0x03
+#define SERIO_MP	0x04
+#define SERIO_MZ	0x05
+#define SERIO_MZP	0x06
+#define SERIO_MZPP	0x07
+#define SERIO_VSXXXAA	0x08
+#define SERIO_SUNKBD	0x10
+#define SERIO_WARRIOR	0x18
+#define SERIO_SPACEORB	0x19
+#define SERIO_MAGELLAN	0x1a
+#define SERIO_SPACEBALL	0x1b
+#define SERIO_GUNZE	0x1c
+#define SERIO_IFORCE	0x1d
+#define SERIO_STINGER	0x1e
+#define SERIO_NEWTON	0x1f
+#define SERIO_STOWAWAY	0x20
+#define SERIO_H3600	0x21
+#define SERIO_PS2SER	0x22
+#define SERIO_TWIDKBD	0x23
+#define SERIO_TWIDJOY	0x24
+#define SERIO_HIL	0x25
+#define SERIO_SNES232	0x26
+#define SERIO_SEMTECH	0x27
+#define SERIO_LKKBD	0x28
+#define SERIO_ELO	0x29
+#define SERIO_MICROTOUCH	0x30
+#define SERIO_PENMOUNT	0x31
+#define SERIO_TOUCHRIGHT	0x32
+#define SERIO_TOUCHWIN	0x33
+#define SERIO_TAOSEVM	0x34
+#define SERIO_FUJITSU	0x35
+#define SERIO_ZHENHUA	0x36
+#define SERIO_INEXIO	0x37
+#define SERIO_TOUCHIT213	0x38
+#define SERIO_W8001	0x39
+#define SERIO_DYNAPRO	0x3a
+#define SERIO_HAMPSHIRE	0x3b
+#define SERIO_PS2MULT	0x3c
+#define SERIO_TSC40	0x3d
+
+#endif /* _UAPI_SERIO_H */
diff --git a/include/uapi/linux/shm.h b/include/uapi/linux/shm.h
new file mode 100644
index 00000000000..ec36fa1a83a
--- /dev/null
+++ b/include/uapi/linux/shm.h
@@ -0,0 +1,79 @@
+#ifndef _UAPI_LINUX_SHM_H_
+#define _UAPI_LINUX_SHM_H_
+
+#include <linux/ipc.h>
+#include <linux/errno.h>
+#ifndef __KERNEL__
+#include <unistd.h>
+#endif
+
+/*
+ * SHMMAX, SHMMNI and SHMALL are upper limits are defaults which can
+ * be increased by sysctl
+ */
+
+#define SHMMAX 0x2000000		 /* max shared seg size (bytes) */
+#define SHMMIN 1			 /* min shared seg size (bytes) */
+#define SHMMNI 4096			 /* max num of segs system wide */
+#ifndef __KERNEL__
+#define SHMALL (SHMMAX/getpagesize()*(SHMMNI/16))
+#endif
+#define SHMSEG SHMMNI			 /* max shared segs per process */
+
+
+/* Obsolete, used only for backwards compatibility and libc5 compiles */
+struct shmid_ds {
+	struct ipc_perm		shm_perm;	/* operation perms */
+	int			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	__kernel_time_t		shm_ctime;	/* last change time */
+	__kernel_ipc_pid_t	shm_cpid;	/* pid of creator */
+	__kernel_ipc_pid_t	shm_lpid;	/* pid of last operator */
+	unsigned short		shm_nattch;	/* no. of current attaches */
+	unsigned short 		shm_unused;	/* compatibility */
+	void 			*shm_unused2;	/* ditto - used by DIPC */
+	void			*shm_unused3;	/* unused */
+};
+
+/* Include the definition of shmid64_ds and shminfo64 */
+#include <asm/shmbuf.h>
+
+/* permission flag for shmget */
+#define SHM_R		0400	/* or S_IRUGO from <linux/stat.h> */
+#define SHM_W		0200	/* or S_IWUGO from <linux/stat.h> */
+
+/* mode for attach */
+#define	SHM_RDONLY	010000	/* read-only access */
+#define	SHM_RND		020000	/* round attach address to SHMLBA boundary */
+#define	SHM_REMAP	040000	/* take-over region on attach */
+#define	SHM_EXEC	0100000	/* execution access */
+
+/* super user shmctl commands */
+#define SHM_LOCK 	11
+#define SHM_UNLOCK 	12
+
+/* ipcs ctl commands */
+#define SHM_STAT 	13
+#define SHM_INFO 	14
+
+/* Obsolete, used only for backwards compatibility */
+struct	shminfo {
+	int shmmax;
+	int shmmin;
+	int shmmni;
+	int shmseg;
+	int shmall;
+};
+
+struct shm_info {
+	int used_ids;
+	unsigned long shm_tot;	/* total allocated shm */
+	unsigned long shm_rss;	/* total resident shm */
+	unsigned long shm_swp;	/* total swapped shm */
+	unsigned long swap_attempts;
+	unsigned long swap_successes;
+};
+
+
+#endif /* _UAPI_LINUX_SHM_H_ */
diff --git a/include/uapi/linux/signal.h b/include/uapi/linux/signal.h
new file mode 100644
index 00000000000..dff452ed6d0
--- /dev/null
+++ b/include/uapi/linux/signal.h
@@ -0,0 +1,8 @@
+#ifndef _UAPI_LINUX_SIGNAL_H
+#define _UAPI_LINUX_SIGNAL_H
+
+#include <asm/signal.h>
+#include <asm/siginfo.h>
+
+
+#endif /* _UAPI_LINUX_SIGNAL_H */
diff --git a/include/uapi/linux/signalfd.h b/include/uapi/linux/signalfd.h
new file mode 100644
index 00000000000..492c6def340
--- /dev/null
+++ b/include/uapi/linux/signalfd.h
@@ -0,0 +1,52 @@
+/*
+ *  include/linux/signalfd.h
+ *
+ *  Copyright (C) 2007  Davide Libenzi <davidel@xmailserver.org>
+ *
+ */
+
+#ifndef _UAPI_LINUX_SIGNALFD_H
+#define _UAPI_LINUX_SIGNALFD_H
+
+#include <linux/types.h>
+/* For O_CLOEXEC and O_NONBLOCK */
+#include <linux/fcntl.h>
+
+/* Flags for signalfd4.  */
+#define SFD_CLOEXEC O_CLOEXEC
+#define SFD_NONBLOCK O_NONBLOCK
+
+struct signalfd_siginfo {
+	__u32 ssi_signo;
+	__s32 ssi_errno;
+	__s32 ssi_code;
+	__u32 ssi_pid;
+	__u32 ssi_uid;
+	__s32 ssi_fd;
+	__u32 ssi_tid;
+	__u32 ssi_band;
+	__u32 ssi_overrun;
+	__u32 ssi_trapno;
+	__s32 ssi_status;
+	__s32 ssi_int;
+	__u64 ssi_ptr;
+	__u64 ssi_utime;
+	__u64 ssi_stime;
+	__u64 ssi_addr;
+	__u16 ssi_addr_lsb;
+
+	/*
+	 * Pad strcture to 128 bytes. Remember to update the
+	 * pad size when you add new members. We use a fixed
+	 * size structure to avoid compatibility problems with
+	 * future versions, and we leave extra space for additional
+	 * members. We use fixed size members because this strcture
+	 * comes out of a read(2) and we really don't want to have
+	 * a compat on read(2).
+	 */
+	__u8 __pad[46];
+};
+
+
+
+#endif /* _UAPI_LINUX_SIGNALFD_H */
diff --git a/include/uapi/linux/snmp.h b/include/uapi/linux/snmp.h
new file mode 100644
index 00000000000..fdfba235f9f
--- /dev/null
+++ b/include/uapi/linux/snmp.h
@@ -0,0 +1,284 @@
+/*
+ * Definitions for MIBs
+ *
+ * Author: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
+ */
+
+#ifndef _LINUX_SNMP_H
+#define _LINUX_SNMP_H
+
+/* ipstats mib definitions */
+/*
+ * RFC 1213:  MIB-II
+ * RFC 2011 (updates 1213):  SNMPv2-MIB-IP
+ * RFC 2863:  Interfaces Group MIB
+ * RFC 2465:  IPv6 MIB: General Group
+ * draft-ietf-ipv6-rfc2011-update-10.txt: MIB for IP: IP Statistics Tables
+ */
+enum
+{
+	IPSTATS_MIB_NUM = 0,
+/* frequently written fields in fast path, kept in same cache line */
+	IPSTATS_MIB_INPKTS,			/* InReceives */
+	IPSTATS_MIB_INOCTETS,			/* InOctets */
+	IPSTATS_MIB_INDELIVERS,			/* InDelivers */
+	IPSTATS_MIB_OUTFORWDATAGRAMS,		/* OutForwDatagrams */
+	IPSTATS_MIB_OUTPKTS,			/* OutRequests */
+	IPSTATS_MIB_OUTOCTETS,			/* OutOctets */
+/* other fields */
+	IPSTATS_MIB_INHDRERRORS,		/* InHdrErrors */
+	IPSTATS_MIB_INTOOBIGERRORS,		/* InTooBigErrors */
+	IPSTATS_MIB_INNOROUTES,			/* InNoRoutes */
+	IPSTATS_MIB_INADDRERRORS,		/* InAddrErrors */
+	IPSTATS_MIB_INUNKNOWNPROTOS,		/* InUnknownProtos */
+	IPSTATS_MIB_INTRUNCATEDPKTS,		/* InTruncatedPkts */
+	IPSTATS_MIB_INDISCARDS,			/* InDiscards */
+	IPSTATS_MIB_OUTDISCARDS,		/* OutDiscards */
+	IPSTATS_MIB_OUTNOROUTES,		/* OutNoRoutes */
+	IPSTATS_MIB_REASMTIMEOUT,		/* ReasmTimeout */
+	IPSTATS_MIB_REASMREQDS,			/* ReasmReqds */
+	IPSTATS_MIB_REASMOKS,			/* ReasmOKs */
+	IPSTATS_MIB_REASMFAILS,			/* ReasmFails */
+	IPSTATS_MIB_FRAGOKS,			/* FragOKs */
+	IPSTATS_MIB_FRAGFAILS,			/* FragFails */
+	IPSTATS_MIB_FRAGCREATES,		/* FragCreates */
+	IPSTATS_MIB_INMCASTPKTS,		/* InMcastPkts */
+	IPSTATS_MIB_OUTMCASTPKTS,		/* OutMcastPkts */
+	IPSTATS_MIB_INBCASTPKTS,		/* InBcastPkts */
+	IPSTATS_MIB_OUTBCASTPKTS,		/* OutBcastPkts */
+	IPSTATS_MIB_INMCASTOCTETS,		/* InMcastOctets */
+	IPSTATS_MIB_OUTMCASTOCTETS,		/* OutMcastOctets */
+	IPSTATS_MIB_INBCASTOCTETS,		/* InBcastOctets */
+	IPSTATS_MIB_OUTBCASTOCTETS,		/* OutBcastOctets */
+	__IPSTATS_MIB_MAX
+};
+
+/* icmp mib definitions */
+/*
+ * RFC 1213:  MIB-II ICMP Group
+ * RFC 2011 (updates 1213):  SNMPv2 MIB for IP: ICMP group
+ */
+enum
+{
+	ICMP_MIB_NUM = 0,
+	ICMP_MIB_INMSGS,			/* InMsgs */
+	ICMP_MIB_INERRORS,			/* InErrors */
+	ICMP_MIB_INDESTUNREACHS,		/* InDestUnreachs */
+	ICMP_MIB_INTIMEEXCDS,			/* InTimeExcds */
+	ICMP_MIB_INPARMPROBS,			/* InParmProbs */
+	ICMP_MIB_INSRCQUENCHS,			/* InSrcQuenchs */
+	ICMP_MIB_INREDIRECTS,			/* InRedirects */
+	ICMP_MIB_INECHOS,			/* InEchos */
+	ICMP_MIB_INECHOREPS,			/* InEchoReps */
+	ICMP_MIB_INTIMESTAMPS,			/* InTimestamps */
+	ICMP_MIB_INTIMESTAMPREPS,		/* InTimestampReps */
+	ICMP_MIB_INADDRMASKS,			/* InAddrMasks */
+	ICMP_MIB_INADDRMASKREPS,		/* InAddrMaskReps */
+	ICMP_MIB_OUTMSGS,			/* OutMsgs */
+	ICMP_MIB_OUTERRORS,			/* OutErrors */
+	ICMP_MIB_OUTDESTUNREACHS,		/* OutDestUnreachs */
+	ICMP_MIB_OUTTIMEEXCDS,			/* OutTimeExcds */
+	ICMP_MIB_OUTPARMPROBS,			/* OutParmProbs */
+	ICMP_MIB_OUTSRCQUENCHS,			/* OutSrcQuenchs */
+	ICMP_MIB_OUTREDIRECTS,			/* OutRedirects */
+	ICMP_MIB_OUTECHOS,			/* OutEchos */
+	ICMP_MIB_OUTECHOREPS,			/* OutEchoReps */
+	ICMP_MIB_OUTTIMESTAMPS,			/* OutTimestamps */
+	ICMP_MIB_OUTTIMESTAMPREPS,		/* OutTimestampReps */
+	ICMP_MIB_OUTADDRMASKS,			/* OutAddrMasks */
+	ICMP_MIB_OUTADDRMASKREPS,		/* OutAddrMaskReps */
+	__ICMP_MIB_MAX
+};
+
+#define __ICMPMSG_MIB_MAX 512	/* Out+In for all 8-bit ICMP types */
+
+/* icmp6 mib definitions */
+/*
+ * RFC 2466:  ICMPv6-MIB
+ */
+enum
+{
+	ICMP6_MIB_NUM = 0,
+	ICMP6_MIB_INMSGS,			/* InMsgs */
+	ICMP6_MIB_INERRORS,			/* InErrors */
+	ICMP6_MIB_OUTMSGS,			/* OutMsgs */
+	ICMP6_MIB_OUTERRORS,			/* OutErrors */
+	__ICMP6_MIB_MAX
+};
+
+#define __ICMP6MSG_MIB_MAX 512 /* Out+In for all 8-bit ICMPv6 types */
+
+/* tcp mib definitions */
+/*
+ * RFC 1213:  MIB-II TCP group
+ * RFC 2012 (updates 1213):  SNMPv2-MIB-TCP
+ */
+enum
+{
+	TCP_MIB_NUM = 0,
+	TCP_MIB_RTOALGORITHM,			/* RtoAlgorithm */
+	TCP_MIB_RTOMIN,				/* RtoMin */
+	TCP_MIB_RTOMAX,				/* RtoMax */
+	TCP_MIB_MAXCONN,			/* MaxConn */
+	TCP_MIB_ACTIVEOPENS,			/* ActiveOpens */
+	TCP_MIB_PASSIVEOPENS,			/* PassiveOpens */
+	TCP_MIB_ATTEMPTFAILS,			/* AttemptFails */
+	TCP_MIB_ESTABRESETS,			/* EstabResets */
+	TCP_MIB_CURRESTAB,			/* CurrEstab */
+	TCP_MIB_INSEGS,				/* InSegs */
+	TCP_MIB_OUTSEGS,			/* OutSegs */
+	TCP_MIB_RETRANSSEGS,			/* RetransSegs */
+	TCP_MIB_INERRS,				/* InErrs */
+	TCP_MIB_OUTRSTS,			/* OutRsts */
+	__TCP_MIB_MAX
+};
+
+/* udp mib definitions */
+/*
+ * RFC 1213:  MIB-II UDP group
+ * RFC 2013 (updates 1213):  SNMPv2-MIB-UDP
+ */
+enum
+{
+	UDP_MIB_NUM = 0,
+	UDP_MIB_INDATAGRAMS,			/* InDatagrams */
+	UDP_MIB_NOPORTS,			/* NoPorts */
+	UDP_MIB_INERRORS,			/* InErrors */
+	UDP_MIB_OUTDATAGRAMS,			/* OutDatagrams */
+	UDP_MIB_RCVBUFERRORS,			/* RcvbufErrors */
+	UDP_MIB_SNDBUFERRORS,			/* SndbufErrors */
+	__UDP_MIB_MAX
+};
+
+/* linux mib definitions */
+enum
+{
+	LINUX_MIB_NUM = 0,
+	LINUX_MIB_SYNCOOKIESSENT,		/* SyncookiesSent */
+	LINUX_MIB_SYNCOOKIESRECV,		/* SyncookiesRecv */
+	LINUX_MIB_SYNCOOKIESFAILED,		/* SyncookiesFailed */
+	LINUX_MIB_EMBRYONICRSTS,		/* EmbryonicRsts */
+	LINUX_MIB_PRUNECALLED,			/* PruneCalled */
+	LINUX_MIB_RCVPRUNED,			/* RcvPruned */
+	LINUX_MIB_OFOPRUNED,			/* OfoPruned */
+	LINUX_MIB_OUTOFWINDOWICMPS,		/* OutOfWindowIcmps */
+	LINUX_MIB_LOCKDROPPEDICMPS,		/* LockDroppedIcmps */
+	LINUX_MIB_ARPFILTER,			/* ArpFilter */
+	LINUX_MIB_TIMEWAITED,			/* TimeWaited */
+	LINUX_MIB_TIMEWAITRECYCLED,		/* TimeWaitRecycled */
+	LINUX_MIB_TIMEWAITKILLED,		/* TimeWaitKilled */
+	LINUX_MIB_PAWSPASSIVEREJECTED,		/* PAWSPassiveRejected */
+	LINUX_MIB_PAWSACTIVEREJECTED,		/* PAWSActiveRejected */
+	LINUX_MIB_PAWSESTABREJECTED,		/* PAWSEstabRejected */
+	LINUX_MIB_DELAYEDACKS,			/* DelayedACKs */
+	LINUX_MIB_DELAYEDACKLOCKED,		/* DelayedACKLocked */
+	LINUX_MIB_DELAYEDACKLOST,		/* DelayedACKLost */
+	LINUX_MIB_LISTENOVERFLOWS,		/* ListenOverflows */
+	LINUX_MIB_LISTENDROPS,			/* ListenDrops */
+	LINUX_MIB_TCPPREQUEUED,			/* TCPPrequeued */
+	LINUX_MIB_TCPDIRECTCOPYFROMBACKLOG,	/* TCPDirectCopyFromBacklog */
+	LINUX_MIB_TCPDIRECTCOPYFROMPREQUEUE,	/* TCPDirectCopyFromPrequeue */
+	LINUX_MIB_TCPPREQUEUEDROPPED,		/* TCPPrequeueDropped */
+	LINUX_MIB_TCPHPHITS,			/* TCPHPHits */
+	LINUX_MIB_TCPHPHITSTOUSER,		/* TCPHPHitsToUser */
+	LINUX_MIB_TCPPUREACKS,			/* TCPPureAcks */
+	LINUX_MIB_TCPHPACKS,			/* TCPHPAcks */
+	LINUX_MIB_TCPRENORECOVERY,		/* TCPRenoRecovery */
+	LINUX_MIB_TCPSACKRECOVERY,		/* TCPSackRecovery */
+	LINUX_MIB_TCPSACKRENEGING,		/* TCPSACKReneging */
+	LINUX_MIB_TCPFACKREORDER,		/* TCPFACKReorder */
+	LINUX_MIB_TCPSACKREORDER,		/* TCPSACKReorder */
+	LINUX_MIB_TCPRENOREORDER,		/* TCPRenoReorder */
+	LINUX_MIB_TCPTSREORDER,			/* TCPTSReorder */
+	LINUX_MIB_TCPFULLUNDO,			/* TCPFullUndo */
+	LINUX_MIB_TCPPARTIALUNDO,		/* TCPPartialUndo */
+	LINUX_MIB_TCPDSACKUNDO,			/* TCPDSACKUndo */
+	LINUX_MIB_TCPLOSSUNDO,			/* TCPLossUndo */
+	LINUX_MIB_TCPLOSTRETRANSMIT,		/* TCPLostRetransmit */
+	LINUX_MIB_TCPRENOFAILURES,		/* TCPRenoFailures */
+	LINUX_MIB_TCPSACKFAILURES,		/* TCPSackFailures */
+	LINUX_MIB_TCPLOSSFAILURES,		/* TCPLossFailures */
+	LINUX_MIB_TCPFASTRETRANS,		/* TCPFastRetrans */
+	LINUX_MIB_TCPFORWARDRETRANS,		/* TCPForwardRetrans */
+	LINUX_MIB_TCPSLOWSTARTRETRANS,		/* TCPSlowStartRetrans */
+	LINUX_MIB_TCPTIMEOUTS,			/* TCPTimeouts */
+	LINUX_MIB_TCPRENORECOVERYFAIL,		/* TCPRenoRecoveryFail */
+	LINUX_MIB_TCPSACKRECOVERYFAIL,		/* TCPSackRecoveryFail */
+	LINUX_MIB_TCPSCHEDULERFAILED,		/* TCPSchedulerFailed */
+	LINUX_MIB_TCPRCVCOLLAPSED,		/* TCPRcvCollapsed */
+	LINUX_MIB_TCPDSACKOLDSENT,		/* TCPDSACKOldSent */
+	LINUX_MIB_TCPDSACKOFOSENT,		/* TCPDSACKOfoSent */
+	LINUX_MIB_TCPDSACKRECV,			/* TCPDSACKRecv */
+	LINUX_MIB_TCPDSACKOFORECV,		/* TCPDSACKOfoRecv */
+	LINUX_MIB_TCPABORTONDATA,		/* TCPAbortOnData */
+	LINUX_MIB_TCPABORTONCLOSE,		/* TCPAbortOnClose */
+	LINUX_MIB_TCPABORTONMEMORY,		/* TCPAbortOnMemory */
+	LINUX_MIB_TCPABORTONTIMEOUT,		/* TCPAbortOnTimeout */
+	LINUX_MIB_TCPABORTONLINGER,		/* TCPAbortOnLinger */
+	LINUX_MIB_TCPABORTFAILED,		/* TCPAbortFailed */
+	LINUX_MIB_TCPMEMORYPRESSURES,		/* TCPMemoryPressures */
+	LINUX_MIB_TCPSACKDISCARD,		/* TCPSACKDiscard */
+	LINUX_MIB_TCPDSACKIGNOREDOLD,		/* TCPSACKIgnoredOld */
+	LINUX_MIB_TCPDSACKIGNOREDNOUNDO,	/* TCPSACKIgnoredNoUndo */
+	LINUX_MIB_TCPSPURIOUSRTOS,		/* TCPSpuriousRTOs */
+	LINUX_MIB_TCPMD5NOTFOUND,		/* TCPMD5NotFound */
+	LINUX_MIB_TCPMD5UNEXPECTED,		/* TCPMD5Unexpected */
+	LINUX_MIB_SACKSHIFTED,
+	LINUX_MIB_SACKMERGED,
+	LINUX_MIB_SACKSHIFTFALLBACK,
+	LINUX_MIB_TCPBACKLOGDROP,
+	LINUX_MIB_TCPMINTTLDROP, /* RFC 5082 */
+	LINUX_MIB_TCPDEFERACCEPTDROP,
+	LINUX_MIB_IPRPFILTER, /* IP Reverse Path Filter (rp_filter) */
+	LINUX_MIB_TCPTIMEWAITOVERFLOW,		/* TCPTimeWaitOverflow */
+	LINUX_MIB_TCPREQQFULLDOCOOKIES,		/* TCPReqQFullDoCookies */
+	LINUX_MIB_TCPREQQFULLDROP,		/* TCPReqQFullDrop */
+	LINUX_MIB_TCPRETRANSFAIL,		/* TCPRetransFail */
+	LINUX_MIB_TCPRCVCOALESCE,		/* TCPRcvCoalesce */
+	LINUX_MIB_TCPOFOQUEUE,			/* TCPOFOQueue */
+	LINUX_MIB_TCPOFODROP,			/* TCPOFODrop */
+	LINUX_MIB_TCPOFOMERGE,			/* TCPOFOMerge */
+	LINUX_MIB_TCPCHALLENGEACK,		/* TCPChallengeACK */
+	LINUX_MIB_TCPSYNCHALLENGE,		/* TCPSYNChallenge */
+	LINUX_MIB_TCPFASTOPENACTIVE,		/* TCPFastOpenActive */
+	LINUX_MIB_TCPFASTOPENPASSIVE,		/* TCPFastOpenPassive*/
+	LINUX_MIB_TCPFASTOPENPASSIVEFAIL,	/* TCPFastOpenPassiveFail */
+	LINUX_MIB_TCPFASTOPENLISTENOVERFLOW,	/* TCPFastOpenListenOverflow */
+	LINUX_MIB_TCPFASTOPENCOOKIEREQD,	/* TCPFastOpenCookieReqd */
+	__LINUX_MIB_MAX
+};
+
+/* linux Xfrm mib definitions */
+enum
+{
+	LINUX_MIB_XFRMNUM = 0,
+	LINUX_MIB_XFRMINERROR,			/* XfrmInError */
+	LINUX_MIB_XFRMINBUFFERERROR,		/* XfrmInBufferError */
+	LINUX_MIB_XFRMINHDRERROR,		/* XfrmInHdrError */
+	LINUX_MIB_XFRMINNOSTATES,		/* XfrmInNoStates */
+	LINUX_MIB_XFRMINSTATEPROTOERROR,	/* XfrmInStateProtoError */
+	LINUX_MIB_XFRMINSTATEMODEERROR,		/* XfrmInStateModeError */
+	LINUX_MIB_XFRMINSTATESEQERROR,		/* XfrmInStateSeqError */
+	LINUX_MIB_XFRMINSTATEEXPIRED,		/* XfrmInStateExpired */
+	LINUX_MIB_XFRMINSTATEMISMATCH,		/* XfrmInStateMismatch */
+	LINUX_MIB_XFRMINSTATEINVALID,		/* XfrmInStateInvalid */
+	LINUX_MIB_XFRMINTMPLMISMATCH,		/* XfrmInTmplMismatch */
+	LINUX_MIB_XFRMINNOPOLS,			/* XfrmInNoPols */
+	LINUX_MIB_XFRMINPOLBLOCK,		/* XfrmInPolBlock */
+	LINUX_MIB_XFRMINPOLERROR,		/* XfrmInPolError */
+	LINUX_MIB_XFRMOUTERROR,			/* XfrmOutError */
+	LINUX_MIB_XFRMOUTBUNDLEGENERROR,	/* XfrmOutBundleGenError */
+	LINUX_MIB_XFRMOUTBUNDLECHECKERROR,	/* XfrmOutBundleCheckError */
+	LINUX_MIB_XFRMOUTNOSTATES,		/* XfrmOutNoStates */
+	LINUX_MIB_XFRMOUTSTATEPROTOERROR,	/* XfrmOutStateProtoError */
+	LINUX_MIB_XFRMOUTSTATEMODEERROR,	/* XfrmOutStateModeError */
+	LINUX_MIB_XFRMOUTSTATESEQERROR,		/* XfrmOutStateSeqError */
+	LINUX_MIB_XFRMOUTSTATEEXPIRED,		/* XfrmOutStateExpired */
+	LINUX_MIB_XFRMOUTPOLBLOCK,		/* XfrmOutPolBlock */
+	LINUX_MIB_XFRMOUTPOLDEAD,		/* XfrmOutPolDead */
+	LINUX_MIB_XFRMOUTPOLERROR,		/* XfrmOutPolError */
+	LINUX_MIB_XFRMFWDHDRERROR,		/* XfrmFwdHdrError*/
+	__LINUX_MIB_XFRMMAX
+};
+
+#endif	/* _LINUX_SNMP_H */
diff --git a/include/uapi/linux/sock_diag.h b/include/uapi/linux/sock_diag.h
new file mode 100644
index 00000000000..b00e29efb16
--- /dev/null
+++ b/include/uapi/linux/sock_diag.h
@@ -0,0 +1,26 @@
+#ifndef _UAPI__SOCK_DIAG_H__
+#define _UAPI__SOCK_DIAG_H__
+
+#include <linux/types.h>
+
+#define SOCK_DIAG_BY_FAMILY 20
+
+struct sock_diag_req {
+	__u8	sdiag_family;
+	__u8	sdiag_protocol;
+};
+
+enum {
+	SK_MEMINFO_RMEM_ALLOC,
+	SK_MEMINFO_RCVBUF,
+	SK_MEMINFO_WMEM_ALLOC,
+	SK_MEMINFO_SNDBUF,
+	SK_MEMINFO_FWD_ALLOC,
+	SK_MEMINFO_WMEM_QUEUED,
+	SK_MEMINFO_OPTMEM,
+	SK_MEMINFO_BACKLOG,
+
+	SK_MEMINFO_VARS,
+};
+
+#endif /* _UAPI__SOCK_DIAG_H__ */
diff --git a/include/uapi/linux/socket.h b/include/uapi/linux/socket.h
new file mode 100644
index 00000000000..76ab0c68561
--- /dev/null
+++ b/include/uapi/linux/socket.h
@@ -0,0 +1,21 @@
+#ifndef _UAPI_LINUX_SOCKET_H
+#define _UAPI_LINUX_SOCKET_H
+
+/*
+ * Desired design of maximum size and alignment (see RFC2553)
+ */
+#define _K_SS_MAXSIZE	128	/* Implementation specific max size */
+#define _K_SS_ALIGNSIZE	(__alignof__ (struct sockaddr *))
+				/* Implementation specific desired alignment */
+
+typedef unsigned short __kernel_sa_family_t;
+
+struct __kernel_sockaddr_storage {
+	__kernel_sa_family_t	ss_family;		/* address family */
+	/* Following field(s) are implementation specific */
+	char		__data[_K_SS_MAXSIZE - sizeof(unsigned short)];
+				/* space to achieve desired size, */
+				/* _SS_MAXSIZE value minus size of ss_family */
+} __attribute__ ((aligned(_K_SS_ALIGNSIZE)));	/* force desired alignment */
+
+#endif /* _UAPI_LINUX_SOCKET_H */
diff --git a/include/uapi/linux/sockios.h b/include/uapi/linux/sockios.h
new file mode 100644
index 00000000000..7997a506ad4
--- /dev/null
+++ b/include/uapi/linux/sockios.h
@@ -0,0 +1,148 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions of the socket-level I/O control calls.
+ *
+ * Version:	@(#)sockios.h	1.0.2	03/09/93
+ *
+ * Authors:	Ross Biro
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_SOCKIOS_H
+#define _LINUX_SOCKIOS_H
+
+#include <asm/sockios.h>
+
+/* Linux-specific socket ioctls */
+#define SIOCINQ		FIONREAD
+#define SIOCOUTQ	TIOCOUTQ        /* output queue size (not sent + not acked) */
+
+/* Routing table calls. */
+#define SIOCADDRT	0x890B		/* add routing table entry	*/
+#define SIOCDELRT	0x890C		/* delete routing table entry	*/
+#define SIOCRTMSG	0x890D		/* call to routing system	*/
+
+/* Socket configuration controls. */
+#define SIOCGIFNAME	0x8910		/* get iface name		*/
+#define SIOCSIFLINK	0x8911		/* set iface channel		*/
+#define SIOCGIFCONF	0x8912		/* get iface list		*/
+#define SIOCGIFFLAGS	0x8913		/* get flags			*/
+#define SIOCSIFFLAGS	0x8914		/* set flags			*/
+#define SIOCGIFADDR	0x8915		/* get PA address		*/
+#define SIOCSIFADDR	0x8916		/* set PA address		*/
+#define SIOCGIFDSTADDR	0x8917		/* get remote PA address	*/
+#define SIOCSIFDSTADDR	0x8918		/* set remote PA address	*/
+#define SIOCGIFBRDADDR	0x8919		/* get broadcast PA address	*/
+#define SIOCSIFBRDADDR	0x891a		/* set broadcast PA address	*/
+#define SIOCGIFNETMASK	0x891b		/* get network PA mask		*/
+#define SIOCSIFNETMASK	0x891c		/* set network PA mask		*/
+#define SIOCGIFMETRIC	0x891d		/* get metric			*/
+#define SIOCSIFMETRIC	0x891e		/* set metric			*/
+#define SIOCGIFMEM	0x891f		/* get memory address (BSD)	*/
+#define SIOCSIFMEM	0x8920		/* set memory address (BSD)	*/
+#define SIOCGIFMTU	0x8921		/* get MTU size			*/
+#define SIOCSIFMTU	0x8922		/* set MTU size			*/
+#define SIOCSIFNAME	0x8923		/* set interface name */
+#define	SIOCSIFHWADDR	0x8924		/* set hardware address 	*/
+#define SIOCGIFENCAP	0x8925		/* get/set encapsulations       */
+#define SIOCSIFENCAP	0x8926		
+#define SIOCGIFHWADDR	0x8927		/* Get hardware address		*/
+#define SIOCGIFSLAVE	0x8929		/* Driver slaving support	*/
+#define SIOCSIFSLAVE	0x8930
+#define SIOCADDMULTI	0x8931		/* Multicast address lists	*/
+#define SIOCDELMULTI	0x8932
+#define SIOCGIFINDEX	0x8933		/* name -> if_index mapping	*/
+#define SIOGIFINDEX	SIOCGIFINDEX	/* misprint compatibility :-)	*/
+#define SIOCSIFPFLAGS	0x8934		/* set/get extended flags set	*/
+#define SIOCGIFPFLAGS	0x8935
+#define SIOCDIFADDR	0x8936		/* delete PA address		*/
+#define	SIOCSIFHWBROADCAST	0x8937	/* set hardware broadcast addr	*/
+#define SIOCGIFCOUNT	0x8938		/* get number of devices */
+
+#define SIOCGIFBR	0x8940		/* Bridging support		*/
+#define SIOCSIFBR	0x8941		/* Set bridging options 	*/
+
+#define SIOCGIFTXQLEN	0x8942		/* Get the tx queue length	*/
+#define SIOCSIFTXQLEN	0x8943		/* Set the tx queue length 	*/
+
+/* SIOCGIFDIVERT was:	0x8944		Frame diversion support */
+/* SIOCSIFDIVERT was:	0x8945		Set frame diversion options */
+
+#define SIOCETHTOOL	0x8946		/* Ethtool interface		*/
+
+#define SIOCGMIIPHY	0x8947		/* Get address of MII PHY in use. */
+#define SIOCGMIIREG	0x8948		/* Read MII PHY register.	*/
+#define SIOCSMIIREG	0x8949		/* Write MII PHY register.	*/
+
+#define SIOCWANDEV	0x894A		/* get/set netdev parameters	*/
+
+#define SIOCOUTQNSD	0x894B		/* output queue size (not sent only) */
+
+/* ARP cache control calls. */
+		    /*  0x8950 - 0x8952  * obsolete calls, don't re-use */
+#define SIOCDARP	0x8953		/* delete ARP table entry	*/
+#define SIOCGARP	0x8954		/* get ARP table entry		*/
+#define SIOCSARP	0x8955		/* set ARP table entry		*/
+
+/* RARP cache control calls. */
+#define SIOCDRARP	0x8960		/* delete RARP table entry	*/
+#define SIOCGRARP	0x8961		/* get RARP table entry		*/
+#define SIOCSRARP	0x8962		/* set RARP table entry		*/
+
+/* Driver configuration calls */
+
+#define SIOCGIFMAP	0x8970		/* Get device parameters	*/
+#define SIOCSIFMAP	0x8971		/* Set device parameters	*/
+
+/* DLCI configuration calls */
+
+#define SIOCADDDLCI	0x8980		/* Create new DLCI device	*/
+#define SIOCDELDLCI	0x8981		/* Delete DLCI device		*/
+
+#define SIOCGIFVLAN	0x8982		/* 802.1Q VLAN support		*/
+#define SIOCSIFVLAN	0x8983		/* Set 802.1Q VLAN options 	*/
+
+/* bonding calls */
+
+#define SIOCBONDENSLAVE	0x8990		/* enslave a device to the bond */
+#define SIOCBONDRELEASE 0x8991		/* release a slave from the bond*/
+#define SIOCBONDSETHWADDR      0x8992	/* set the hw addr of the bond  */
+#define SIOCBONDSLAVEINFOQUERY 0x8993   /* rtn info about slave state   */
+#define SIOCBONDINFOQUERY      0x8994	/* rtn info about bond state    */
+#define SIOCBONDCHANGEACTIVE   0x8995   /* update to a new active slave */
+			
+/* bridge calls */
+#define SIOCBRADDBR     0x89a0		/* create new bridge device     */
+#define SIOCBRDELBR     0x89a1		/* remove bridge device         */
+#define SIOCBRADDIF	0x89a2		/* add interface to bridge      */
+#define SIOCBRDELIF	0x89a3		/* remove interface from bridge */
+
+/* hardware time stamping: parameters in linux/net_tstamp.h */
+#define SIOCSHWTSTAMP   0x89b0
+
+/* Device private ioctl calls */
+
+/*
+ *	These 16 ioctls are available to devices via the do_ioctl() device
+ *	vector. Each device should include this file and redefine these names
+ *	as their own. Because these are device dependent it is a good idea
+ *	_NOT_ to issue them to random objects and hope.
+ *
+ *	THESE IOCTLS ARE _DEPRECATED_ AND WILL DISAPPEAR IN 2.5.X -DaveM
+ */
+ 
+#define SIOCDEVPRIVATE	0x89F0	/* to 89FF */
+
+/*
+ *	These 16 ioctl calls are protocol private
+ */
+ 
+#define SIOCPROTOPRIVATE 0x89E0 /* to 89EF */
+#endif	/* _LINUX_SOCKIOS_H */
diff --git a/include/uapi/linux/som.h b/include/uapi/linux/som.h
new file mode 100644
index 00000000000..166594e4e7b
--- /dev/null
+++ b/include/uapi/linux/som.h
@@ -0,0 +1,154 @@
+#ifndef _LINUX_SOM_H
+#define _LINUX_SOM_H
+
+/* File format definition for SOM executables / shared libraries */
+
+/* we need struct timespec */
+#include <linux/time.h>
+
+#define SOM_PAGESIZE 4096
+
+/* this is the SOM header */
+struct som_hdr {
+	short		system_id;		/* magic number - system */
+	short		a_magic;		/* magic number - file type */
+	unsigned int	version_id;		/* versiod ID: YYMMDDHH */
+	struct timespec	file_time;		/* system clock */
+	unsigned int	entry_space;		/* space for entry point */
+	unsigned int	entry_subspace;		/* subspace for entry point */
+	unsigned int	entry_offset;		/* offset of entry point */
+	unsigned int	aux_header_location;	/* auxiliary header location */
+	unsigned int	aux_header_size;	/* auxiliary header size */
+	unsigned int	som_length;		/* length of entire SOM */
+	unsigned int	presumed_dp;		/* compiler's DP value */
+	unsigned int	space_location;		/* space dictionary location */
+	unsigned int	space_total;		/* number of space entries */
+	unsigned int	subspace_location;	/* subspace entries location */
+	unsigned int	subspace_total;		/* number of subspace entries */
+	unsigned int	loader_fixup_location;	/* MPE/iX loader fixup */
+	unsigned int	loader_fixup_total;	/* number of fixup records */
+	unsigned int	space_strings_location;	/* (sub)space names */
+	unsigned int	space_strings_size;	/* size of strings area */
+	unsigned int	init_array_location;	/* reserved */
+	unsigned int	init_array_total;	/* reserved */
+	unsigned int	compiler_location;	/* module dictionary */
+	unsigned int	compiler_total;		/* number of modules */
+	unsigned int	symbol_location;	/* symbol dictionary */
+	unsigned int	symbol_total;		/* number of symbols */
+	unsigned int	fixup_request_location;	/* fixup requests */
+	unsigned int	fixup_request_total;	/* number of fixup requests */
+	unsigned int	symbol_strings_location;/* module & symbol names area */
+	unsigned int	symbol_strings_size;	/* size of strings area */
+	unsigned int	unloadable_sp_location;	/* unloadable spaces location */
+	unsigned int	unloadable_sp_size;	/* size of data */
+	unsigned int	checksum;
+};
+
+/* values for system_id */
+
+#define SOM_SID_PARISC_1_0	0x020b
+#define SOM_SID_PARISC_1_1	0x0210
+#define SOM_SID_PARISC_2_0	0x0214
+
+/* values for a_magic */
+
+#define SOM_LIB_EXEC		0x0104
+#define SOM_RELOCATABLE		0x0106
+#define SOM_EXEC_NONSHARE	0x0107
+#define SOM_EXEC_SHARE		0x0108
+#define SOM_EXEC_DEMAND		0x010B
+#define SOM_LIB_DYN		0x010D
+#define SOM_LIB_SHARE		0x010E
+#define SOM_LIB_RELOC		0x0619
+
+/* values for version_id.  Decimal not hex, yes.  Grr. */
+
+#define SOM_ID_OLD		85082112
+#define SOM_ID_NEW		87102412
+
+struct aux_id {
+	unsigned int	mandatory :1;	/* the linker must understand this */
+	unsigned int	copy	  :1;	/* Must be copied by the linker */
+	unsigned int	append	  :1;	/* Must be merged by the linker */
+	unsigned int	ignore	  :1;	/* Discard section if unknown */
+	unsigned int	reserved  :12;
+	unsigned int	type	  :16;	/* Header type */
+	unsigned int	length;		/* length of _following_ data */
+};
+
+/* The Exec Auxiliary Header.  Called The HP-UX Header within HP apparently. */
+struct som_exec_auxhdr {
+	struct aux_id	som_auxhdr;
+	int		exec_tsize;	/* Text size in bytes */
+	int		exec_tmem;	/* Address to load text at */
+	int		exec_tfile;	/* Location of text in file */
+	int		exec_dsize;	/* Data size in bytes */
+	int		exec_dmem;	/* Address to load data at */
+	int		exec_dfile;	/* Location of data in file */
+	int		exec_bsize;	/* Uninitialised data (bss) */
+	int		exec_entry;	/* Address to start executing */
+	int		exec_flags;	/* loader flags */
+	int		exec_bfill;	/* initialisation value for bss */
+};
+
+/* Oh, the things people do to avoid casts.  Shame it'll break with gcc's
+ * new aliasing rules really.
+ */
+union name_pt {
+	char *		n_name;
+	unsigned int	n_strx;
+};
+
+/* The Space Dictionary */
+struct space_dictionary_record {
+	union name_pt	name;			/* index to subspace name */
+	unsigned int	is_loadable	:1;	/* loadable */
+	unsigned int	is_defined	:1;	/* defined within file */
+	unsigned int	is_private	:1;	/* not sharable */
+	unsigned int	has_intermediate_code :1; /* contains intermediate code */
+	unsigned int	is_tspecific	:1;	/* thread specific */
+	unsigned int	reserved	:11;	/* for future expansion */
+	unsigned int	sort_key	:8;	/* for linker */
+	unsigned int	reserved2	:8;	/* for future expansion */
+
+	int		space_number;		/* index */
+	int		subspace_index;		/* index into subspace dict */
+	unsigned int	subspace_quantity;	/* number of subspaces */
+	int		loader_fix_index;	/* for loader */
+	unsigned int	loader_fix_quantity;	/* for loader */
+	int		init_pointer_index;	/* data pointer array index */
+	unsigned int	init_pointer_quantity;	/* number of data pointers */
+};
+
+/* The Subspace Dictionary */
+struct subspace_dictionary_record {
+	int		space_index;
+	unsigned int	access_control_bits :7;
+	unsigned int	memory_resident	:1;
+	unsigned int	dup_common	:1;
+	unsigned int	is_common	:1;
+	unsigned int	quadrant	:2;
+	unsigned int	initially_frozen :1;
+	unsigned int	is_first	:1;
+	unsigned int	code_only	:1;
+	unsigned int	sort_key	:8;
+	unsigned int	replicate_init	:1;
+	unsigned int	continuation	:1;
+	unsigned int	is_tspecific	:1;
+	unsigned int	is_comdat	:1;
+	unsigned int	reserved	:4;
+
+	int		file_loc_init_value;
+	unsigned int	initialization_length;
+	unsigned int	subspace_start;
+	unsigned int	subspace_length;
+
+	unsigned int	reserved2	:5;
+	unsigned int	alignment	:27;
+
+	union name_pt	name;
+	int		fixup_request_index;
+	unsigned int	fixup_request_quantity;
+};
+
+#endif /* _LINUX_SOM_H */
diff --git a/include/uapi/linux/sonet.h b/include/uapi/linux/sonet.h
new file mode 100644
index 00000000000..cc54acee81b
--- /dev/null
+++ b/include/uapi/linux/sonet.h
@@ -0,0 +1,60 @@
+/* sonet.h - SONET/SHD physical layer control */
+ 
+/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
+ 
+
+#ifndef _UAPILINUX_SONET_H
+#define _UAPILINUX_SONET_H
+
+#define __SONET_ITEMS \
+    __HANDLE_ITEM(section_bip); 	/* section parity errors (B1) */ \
+    __HANDLE_ITEM(line_bip);		/* line parity errors (B2) */ \
+    __HANDLE_ITEM(path_bip);		/* path parity errors (B3) */ \
+    __HANDLE_ITEM(line_febe);		/* line parity errors at remote */ \
+    __HANDLE_ITEM(path_febe);		/* path parity errors at remote */ \
+    __HANDLE_ITEM(corr_hcs);		/* correctable header errors */ \
+    __HANDLE_ITEM(uncorr_hcs);		/* uncorrectable header errors */ \
+    __HANDLE_ITEM(tx_cells);		/* cells sent */ \
+    __HANDLE_ITEM(rx_cells);		/* cells received */
+
+struct sonet_stats {
+#define __HANDLE_ITEM(i) int i
+	__SONET_ITEMS
+#undef __HANDLE_ITEM
+} __attribute__ ((packed));
+
+
+#define SONET_GETSTAT	_IOR('a',ATMIOC_PHYTYP,struct sonet_stats)
+					/* get statistics */
+#define SONET_GETSTATZ	_IOR('a',ATMIOC_PHYTYP+1,struct sonet_stats)
+					/* ... and zero counters */
+#define SONET_SETDIAG	_IOWR('a',ATMIOC_PHYTYP+2,int)
+					/* set error insertion */
+#define SONET_CLRDIAG	_IOWR('a',ATMIOC_PHYTYP+3,int)
+					/* clear error insertion */
+#define SONET_GETDIAG	_IOR('a',ATMIOC_PHYTYP+4,int)
+					/* query error insertion */
+#define SONET_SETFRAMING _IOW('a',ATMIOC_PHYTYP+5,int)
+					/* set framing mode (SONET/SDH) */
+#define SONET_GETFRAMING _IOR('a',ATMIOC_PHYTYP+6,int)
+					/* get framing mode */
+#define SONET_GETFRSENSE _IOR('a',ATMIOC_PHYTYP+7, \
+  unsigned char[SONET_FRSENSE_SIZE])	/* get framing sense information */
+
+#define SONET_INS_SBIP	  1		/* section BIP */
+#define SONET_INS_LBIP	  2		/* line BIP */
+#define SONET_INS_PBIP	  4		/* path BIP */
+#define SONET_INS_FRAME	  8		/* out of frame */
+#define SONET_INS_LOS	 16		/* set line to zero */
+#define SONET_INS_LAIS	 32		/* line alarm indication signal */
+#define SONET_INS_PAIS	 64		/* path alarm indication signal */
+#define SONET_INS_HCS	128		/* insert HCS error */
+
+#define SONET_FRAME_SONET 0		/* SONET STS-3 framing */
+#define SONET_FRAME_SDH   1		/* SDH STM-1 framing */
+
+#define SONET_FRSENSE_SIZE 6		/* C1[3],H1[3] (0xff for unknown) */
+
+
+
+#endif /* _UAPILINUX_SONET_H */
diff --git a/include/uapi/linux/sonypi.h b/include/uapi/linux/sonypi.h
new file mode 100644
index 00000000000..85078a28357
--- /dev/null
+++ b/include/uapi/linux/sonypi.h
@@ -0,0 +1,146 @@
+/*
+ * Sony Programmable I/O Control Device driver for VAIO
+ *
+ * Copyright (C) 2001-2005 Stelian Pop <stelian@popies.net>
+ *
+ * Copyright (C) 2005 Narayanan R S <nars@kadamba.org>
+
+ * Copyright (C) 2001-2002 Alcôve <www.alcove.com>
+ *
+ * Copyright (C) 2001 Michael Ashley <m.ashley@unsw.edu.au>
+ *
+ * Copyright (C) 2001 Junichi Morita <jun1m@mars.dti.ne.jp>
+ *
+ * Copyright (C) 2000 Takaya Kinjo <t-kinjo@tc4.so-net.ne.jp>
+ *
+ * Copyright (C) 2000 Andrew Tridgell <tridge@valinux.com>
+ *
+ * Earlier work by Werner Almesberger, Paul `Rusty' Russell and Paul Mackerras.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef _UAPI_SONYPI_H_
+#define _UAPI_SONYPI_H_
+
+#include <linux/types.h>
+
+/* events the user application reading /dev/sonypi can use */
+
+#define SONYPI_EVENT_IGNORE			 0
+#define SONYPI_EVENT_JOGDIAL_DOWN		 1
+#define SONYPI_EVENT_JOGDIAL_UP			 2
+#define SONYPI_EVENT_JOGDIAL_DOWN_PRESSED	 3
+#define SONYPI_EVENT_JOGDIAL_UP_PRESSED		 4
+#define SONYPI_EVENT_JOGDIAL_PRESSED		 5
+#define SONYPI_EVENT_JOGDIAL_RELEASED		 6	/* obsolete */
+#define SONYPI_EVENT_CAPTURE_PRESSED		 7
+#define SONYPI_EVENT_CAPTURE_RELEASED		 8	/* obsolete */
+#define SONYPI_EVENT_CAPTURE_PARTIALPRESSED	 9
+#define SONYPI_EVENT_CAPTURE_PARTIALRELEASED	10
+#define SONYPI_EVENT_FNKEY_ESC			11
+#define SONYPI_EVENT_FNKEY_F1			12
+#define SONYPI_EVENT_FNKEY_F2			13
+#define SONYPI_EVENT_FNKEY_F3			14
+#define SONYPI_EVENT_FNKEY_F4			15
+#define SONYPI_EVENT_FNKEY_F5			16
+#define SONYPI_EVENT_FNKEY_F6			17
+#define SONYPI_EVENT_FNKEY_F7			18
+#define SONYPI_EVENT_FNKEY_F8			19
+#define SONYPI_EVENT_FNKEY_F9			20
+#define SONYPI_EVENT_FNKEY_F10			21
+#define SONYPI_EVENT_FNKEY_F11			22
+#define SONYPI_EVENT_FNKEY_F12			23
+#define SONYPI_EVENT_FNKEY_1			24
+#define SONYPI_EVENT_FNKEY_2			25
+#define SONYPI_EVENT_FNKEY_D			26
+#define SONYPI_EVENT_FNKEY_E			27
+#define SONYPI_EVENT_FNKEY_F			28
+#define SONYPI_EVENT_FNKEY_S			29
+#define SONYPI_EVENT_FNKEY_B			30
+#define SONYPI_EVENT_BLUETOOTH_PRESSED		31
+#define SONYPI_EVENT_PKEY_P1			32
+#define SONYPI_EVENT_PKEY_P2			33
+#define SONYPI_EVENT_PKEY_P3			34
+#define SONYPI_EVENT_BACK_PRESSED		35
+#define SONYPI_EVENT_LID_CLOSED			36
+#define SONYPI_EVENT_LID_OPENED			37
+#define SONYPI_EVENT_BLUETOOTH_ON		38
+#define SONYPI_EVENT_BLUETOOTH_OFF		39
+#define SONYPI_EVENT_HELP_PRESSED		40
+#define SONYPI_EVENT_FNKEY_ONLY			41
+#define SONYPI_EVENT_JOGDIAL_FAST_DOWN		42
+#define SONYPI_EVENT_JOGDIAL_FAST_UP		43
+#define SONYPI_EVENT_JOGDIAL_FAST_DOWN_PRESSED	44
+#define SONYPI_EVENT_JOGDIAL_FAST_UP_PRESSED	45
+#define SONYPI_EVENT_JOGDIAL_VFAST_DOWN		46
+#define SONYPI_EVENT_JOGDIAL_VFAST_UP		47
+#define SONYPI_EVENT_JOGDIAL_VFAST_DOWN_PRESSED	48
+#define SONYPI_EVENT_JOGDIAL_VFAST_UP_PRESSED	49
+#define SONYPI_EVENT_ZOOM_PRESSED		50
+#define SONYPI_EVENT_THUMBPHRASE_PRESSED	51
+#define SONYPI_EVENT_MEYE_FACE			52
+#define SONYPI_EVENT_MEYE_OPPOSITE		53
+#define SONYPI_EVENT_MEMORYSTICK_INSERT		54
+#define SONYPI_EVENT_MEMORYSTICK_EJECT		55
+#define SONYPI_EVENT_ANYBUTTON_RELEASED		56
+#define SONYPI_EVENT_BATTERY_INSERT		57
+#define SONYPI_EVENT_BATTERY_REMOVE		58
+#define SONYPI_EVENT_FNKEY_RELEASED		59
+#define SONYPI_EVENT_WIRELESS_ON		60
+#define SONYPI_EVENT_WIRELESS_OFF		61
+#define SONYPI_EVENT_ZOOM_IN_PRESSED		62
+#define SONYPI_EVENT_ZOOM_OUT_PRESSED		63
+#define SONYPI_EVENT_CD_EJECT_PRESSED		64
+#define SONYPI_EVENT_MODEKEY_PRESSED		65
+#define SONYPI_EVENT_PKEY_P4			66
+#define SONYPI_EVENT_PKEY_P5			67
+#define SONYPI_EVENT_SETTINGKEY_PRESSED		68
+#define SONYPI_EVENT_VOLUME_INC_PRESSED		69
+#define SONYPI_EVENT_VOLUME_DEC_PRESSED		70
+#define SONYPI_EVENT_BRIGHTNESS_PRESSED		71
+#define SONYPI_EVENT_MEDIA_PRESSED		72
+#define SONYPI_EVENT_VENDOR_PRESSED		73
+
+/* get/set brightness */
+#define SONYPI_IOCGBRT		_IOR('v', 0, __u8)
+#define SONYPI_IOCSBRT		_IOW('v', 0, __u8)
+
+/* get battery full capacity/remaining capacity */
+#define SONYPI_IOCGBAT1CAP	_IOR('v', 2, __u16)
+#define SONYPI_IOCGBAT1REM	_IOR('v', 3, __u16)
+#define SONYPI_IOCGBAT2CAP	_IOR('v', 4, __u16)
+#define SONYPI_IOCGBAT2REM	_IOR('v', 5, __u16)
+
+/* get battery flags: battery1/battery2/ac adapter present */
+#define SONYPI_BFLAGS_B1	0x01
+#define SONYPI_BFLAGS_B2	0x02
+#define SONYPI_BFLAGS_AC	0x04
+#define SONYPI_IOCGBATFLAGS	_IOR('v', 7, __u8)
+
+/* get/set bluetooth subsystem state on/off */
+#define SONYPI_IOCGBLUE		_IOR('v', 8, __u8)
+#define SONYPI_IOCSBLUE		_IOW('v', 9, __u8)
+
+/* get/set fan state on/off */
+#define SONYPI_IOCGFAN		_IOR('v', 10, __u8)
+#define SONYPI_IOCSFAN		_IOW('v', 11, __u8)
+
+/* get temperature (C) */
+#define SONYPI_IOCGTEMP		_IOR('v', 12, __u8)
+
+
+#endif /* _UAPI_SONYPI_H_ */
diff --git a/include/uapi/linux/sound.h b/include/uapi/linux/sound.h
new file mode 100644
index 00000000000..014c9117c22
--- /dev/null
+++ b/include/uapi/linux/sound.h
@@ -0,0 +1,31 @@
+#ifndef _UAPI_LINUX_SOUND_H
+#define _UAPI_LINUX_SOUND_H
+
+/*
+ * Minor numbers for the sound driver.
+ */
+
+#include <linux/fs.h>
+
+#define SND_DEV_CTL		0	/* Control port /dev/mixer */
+#define SND_DEV_SEQ		1	/* Sequencer output /dev/sequencer (FM
+						synthesizer and MIDI output) */
+#define SND_DEV_MIDIN		2	/* Raw midi access */
+#define SND_DEV_DSP		3	/* Digitized voice /dev/dsp */
+#define SND_DEV_AUDIO		4	/* Sparc compatible /dev/audio */
+#define SND_DEV_DSP16		5	/* Like /dev/dsp but 16 bits/sample */
+/* #define SND_DEV_STATUS	6 */	/* /dev/sndstat (obsolete) */
+#define SND_DEV_UNUSED		6
+#define SND_DEV_AWFM		7	/* Reserved */
+#define SND_DEV_SEQ2		8	/* /dev/sequencer, level 2 interface */
+/* #define SND_DEV_SNDPROC	9 */	/* /dev/sndproc for programmable devices (not used) */
+/* #define SND_DEV_DMMIDI	9 */
+#define SND_DEV_SYNTH		9	/* Raw synth access /dev/synth (same as /dev/dmfm) */
+#define SND_DEV_DMFM		10	/* Raw synth access /dev/dmfm */
+#define SND_DEV_UNKNOWN11	11
+#define SND_DEV_ADSP		12	/* Like /dev/dsp (obsolete) */
+#define SND_DEV_AMIDI		13	/* Like /dev/midi (obsolete) */
+#define SND_DEV_ADMMIDI		14	/* Like /dev/dmmidi (onsolete) */
+
+
+#endif /* _UAPI_LINUX_SOUND_H */
diff --git a/include/uapi/linux/soundcard.h b/include/uapi/linux/soundcard.h
new file mode 100644
index 00000000000..f3b21f98987
--- /dev/null
+++ b/include/uapi/linux/soundcard.h
@@ -0,0 +1,1282 @@
+/*
+ * Copyright by Hannu Savolainen 1993-1997
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met: 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer. 2.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+#ifndef _UAPISOUNDCARD_H
+#define _UAPISOUNDCARD_H
+
+
+/*
+ * OSS interface version. With versions earlier than 3.6 this value is
+ * an integer with value less than 361. In versions 3.6 and later
+ * it's a six digit hexadecimal value. For example value
+ * of 0x030600 represents OSS version 3.6.0.
+ * Use ioctl(fd, OSS_GETVERSION, &int) to get the version number of
+ * the currently active driver.
+ */
+#define SOUND_VERSION	0x030802
+#define OPEN_SOUND_SYSTEM
+
+/* In Linux we need to be prepared for cross compiling */
+#include <linux/ioctl.h>
+
+/* Endian macros. */
+#ifndef __KERNEL__
+#  include <endian.h>
+#endif
+
+/*
+ *	Supported card ID numbers (Should be somewhere else?)
+ */
+
+#define SNDCARD_ADLIB		1
+#define SNDCARD_SB		2
+#define SNDCARD_PAS		3
+#define SNDCARD_GUS		4
+#define SNDCARD_MPU401		5
+#define SNDCARD_SB16		6
+#define SNDCARD_SB16MIDI	7
+#define SNDCARD_UART6850	8
+#define SNDCARD_GUS16		9
+#define SNDCARD_MSS		10
+#define SNDCARD_PSS     	11
+#define SNDCARD_SSCAPE		12
+#define SNDCARD_PSS_MPU     	13
+#define SNDCARD_PSS_MSS     	14
+#define SNDCARD_SSCAPE_MSS	15
+#define SNDCARD_TRXPRO		16
+#define SNDCARD_TRXPRO_SB	17
+#define SNDCARD_TRXPRO_MPU	18
+#define SNDCARD_MAD16		19
+#define SNDCARD_MAD16_MPU	20
+#define SNDCARD_CS4232		21
+#define SNDCARD_CS4232_MPU	22
+#define SNDCARD_MAUI		23
+#define SNDCARD_PSEUDO_MSS	24
+#define SNDCARD_GUSPNP		25
+#define SNDCARD_UART401		26
+/* Sound card numbers 27 to N are reserved. Don't add more numbers here. */
+
+/***********************************
+ * IOCTL Commands for /dev/sequencer
+ */
+
+#ifndef _SIOWR
+#if defined(_IOWR) && (defined(_AIX) || (!defined(sun) && !defined(sparc) && !defined(__sparc__) && !defined(__INCioctlh) && !defined(__Lynx__)))
+/* Use already defined ioctl defines if they exist (except with Sun or Sparc) */
+#define	SIOCPARM_MASK	IOCPARM_MASK
+#define	SIOC_VOID	IOC_VOID
+#define	SIOC_OUT	IOC_OUT
+#define	SIOC_IN		IOC_IN
+#define	SIOC_INOUT	IOC_INOUT
+#define _SIOC_SIZE	_IOC_SIZE
+#define _SIOC_DIR	_IOC_DIR
+#define _SIOC_NONE	_IOC_NONE
+#define _SIOC_READ	_IOC_READ
+#define _SIOC_WRITE	_IOC_WRITE
+#define	_SIO		_IO
+#define	_SIOR		_IOR
+#define	_SIOW		_IOW
+#define	_SIOWR		_IOWR
+#else
+
+/* Ioctl's have the command encoded in the lower word,
+ * and the size of any in or out parameters in the upper
+ * word.  The high 2 bits of the upper word are used
+ * to encode the in/out status of the parameter; for now
+ * we restrict parameters to at most 8191 bytes.
+ */
+/* #define	SIOCTYPE		(0xff<<8) */
+#define	SIOCPARM_MASK	0x1fff		/* parameters must be < 8192 bytes */
+#define	SIOC_VOID	0x00000000	/* no parameters */
+#define	SIOC_OUT	0x20000000	/* copy out parameters */
+#define	SIOC_IN		0x40000000	/* copy in parameters */
+#define	SIOC_INOUT	(SIOC_IN|SIOC_OUT)
+/* the 0x20000000 is so we can distinguish new ioctl's from old */
+#define	_SIO(x,y)	((int)(SIOC_VOID|(x<<8)|y))
+#define	_SIOR(x,y,t)	((int)(SIOC_OUT|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
+#define	_SIOW(x,y,t)	((int)(SIOC_IN|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
+/* this should be _SIORW, but stdio got there first */
+#define	_SIOWR(x,y,t)	((int)(SIOC_INOUT|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
+#define _SIOC_SIZE(x)	((x>>16)&SIOCPARM_MASK)	
+#define _SIOC_DIR(x)	(x & 0xf0000000)
+#define _SIOC_NONE	SIOC_VOID
+#define _SIOC_READ	SIOC_OUT
+#define _SIOC_WRITE	SIOC_IN
+#  endif /* _IOWR */
+#endif  /* !_SIOWR */
+
+#define SNDCTL_SEQ_RESET		_SIO  ('Q', 0)
+#define SNDCTL_SEQ_SYNC			_SIO  ('Q', 1)
+#define SNDCTL_SYNTH_INFO		_SIOWR('Q', 2, struct synth_info)
+#define SNDCTL_SEQ_CTRLRATE		_SIOWR('Q', 3, int)	/* Set/get timer resolution (HZ) */
+#define SNDCTL_SEQ_GETOUTCOUNT		_SIOR ('Q', 4, int)
+#define SNDCTL_SEQ_GETINCOUNT		_SIOR ('Q', 5, int)
+#define SNDCTL_SEQ_PERCMODE		_SIOW ('Q', 6, int)
+#define SNDCTL_FM_LOAD_INSTR		_SIOW ('Q', 7, struct sbi_instrument)	/* Obsolete. Don't use!!!!!! */
+#define SNDCTL_SEQ_TESTMIDI		_SIOW ('Q', 8, int)
+#define SNDCTL_SEQ_RESETSAMPLES		_SIOW ('Q', 9, int)
+#define SNDCTL_SEQ_NRSYNTHS		_SIOR ('Q',10, int)
+#define SNDCTL_SEQ_NRMIDIS		_SIOR ('Q',11, int)
+#define SNDCTL_MIDI_INFO		_SIOWR('Q',12, struct midi_info)
+#define SNDCTL_SEQ_THRESHOLD		_SIOW ('Q',13, int)
+#define SNDCTL_SYNTH_MEMAVL		_SIOWR('Q',14, int)	/* in=dev#, out=memsize */
+#define SNDCTL_FM_4OP_ENABLE		_SIOW ('Q',15, int)	/* in=dev# */
+#define SNDCTL_SEQ_PANIC		_SIO  ('Q',17)
+#define SNDCTL_SEQ_OUTOFBAND		_SIOW ('Q',18, struct seq_event_rec)
+#define SNDCTL_SEQ_GETTIME		_SIOR ('Q',19, int)
+#define SNDCTL_SYNTH_ID			_SIOWR('Q',20, struct synth_info)
+#define SNDCTL_SYNTH_CONTROL		_SIOWR('Q',21, struct synth_control)
+#define SNDCTL_SYNTH_REMOVESAMPLE	_SIOWR('Q',22, struct remove_sample)
+
+typedef struct synth_control
+{
+	int devno;	/* Synthesizer # */
+	char data[4000]; /* Device spesific command/data record */
+}synth_control;
+
+typedef struct remove_sample
+{
+	int devno;	/* Synthesizer # */
+	int bankno;	/* MIDI bank # (0=General MIDI) */
+	int instrno;	/* MIDI instrument number */
+} remove_sample;
+
+typedef struct seq_event_rec {
+		unsigned char arr[8];
+} seq_event_rec;
+
+#define SNDCTL_TMR_TIMEBASE		_SIOWR('T', 1, int)
+#define SNDCTL_TMR_START		_SIO  ('T', 2)
+#define SNDCTL_TMR_STOP			_SIO  ('T', 3)
+#define SNDCTL_TMR_CONTINUE		_SIO  ('T', 4)
+#define SNDCTL_TMR_TEMPO		_SIOWR('T', 5, int)
+#define SNDCTL_TMR_SOURCE		_SIOWR('T', 6, int)
+#	define TMR_INTERNAL		0x00000001
+#	define TMR_EXTERNAL		0x00000002
+#		define TMR_MODE_MIDI	0x00000010
+#		define TMR_MODE_FSK	0x00000020
+#		define TMR_MODE_CLS	0x00000040
+#		define TMR_MODE_SMPTE	0x00000080
+#define SNDCTL_TMR_METRONOME		_SIOW ('T', 7, int)
+#define SNDCTL_TMR_SELECT		_SIOW ('T', 8, int)
+
+/*
+ * Some big endian/little endian handling macros
+ */
+
+#define _LINUX_PATCHKEY_H_INDIRECT
+#include <linux/patchkey.h>
+#undef _LINUX_PATCHKEY_H_INDIRECT
+
+#if !defined(__KERNEL__)
+# if defined(__BYTE_ORDER)
+#  if __BYTE_ORDER == __BIG_ENDIAN
+#    define AFMT_S16_NE AFMT_S16_BE
+#  elif __BYTE_ORDER == __LITTLE_ENDIAN
+#    define AFMT_S16_NE AFMT_S16_LE
+#  else
+#    error "could not determine byte order"
+#  endif
+# endif
+#endif
+
+/*
+ *	Sample loading mechanism for internal synthesizers (/dev/sequencer)
+ *	The following patch_info structure has been designed to support
+ *	Gravis UltraSound. It tries to be universal format for uploading
+ *	sample based patches but is probably too limited.
+ *
+ *      (PBD) As Hannu guessed, the GUS structure is too limited for 
+ *      the WaveFront, but this is the right place for a constant definition.
+ */
+
+struct patch_info {
+		unsigned short key;		/* Use WAVE_PATCH here */
+#define WAVE_PATCH	   _PATCHKEY(0x04)
+#define GUS_PATCH	   WAVE_PATCH
+#define WAVEFRONT_PATCH    _PATCHKEY(0x06)
+
+		short device_no;	/* Synthesizer number */
+		short instr_no;		/* Midi pgm# */
+
+		unsigned int mode;
+/*
+ * The least significant byte has the same format than the GUS .PAT
+ * files
+ */
+#define WAVE_16_BITS	0x01	/* bit 0 = 8 or 16 bit wave data. */
+#define WAVE_UNSIGNED	0x02	/* bit 1 = Signed - Unsigned data. */
+#define WAVE_LOOPING	0x04	/* bit 2 = looping enabled-1. */
+#define WAVE_BIDIR_LOOP	0x08	/* bit 3 = Set is bidirectional looping. */
+#define WAVE_LOOP_BACK	0x10	/* bit 4 = Set is looping backward. */
+#define WAVE_SUSTAIN_ON	0x20	/* bit 5 = Turn sustaining on. (Env. pts. 3)*/
+#define WAVE_ENVELOPES	0x40	/* bit 6 = Enable envelopes - 1 */
+#define WAVE_FAST_RELEASE 0x80	/* bit 7 = Shut off immediately after note off */
+				/* 	(use the env_rate/env_offs fields). */
+/* Linux specific bits */
+#define WAVE_VIBRATO	0x00010000	/* The vibrato info is valid */
+#define WAVE_TREMOLO	0x00020000	/* The tremolo info is valid */
+#define WAVE_SCALE	0x00040000	/* The scaling info is valid */
+#define WAVE_FRACTIONS	0x00080000	/* Fraction information is valid */
+/* Reserved bits */
+#define WAVE_ROM	0x40000000	/* For future use */
+#define WAVE_MULAW	0x20000000	/* For future use */
+/* Other bits must be zeroed */
+
+		int len;	/* Size of the wave data in bytes */
+		int loop_start, loop_end; /* Byte offsets from the beginning */
+
+/* 
+ * The base_freq and base_note fields are used when computing the
+ * playback speed for a note. The base_note defines the tone frequency
+ * which is heard if the sample is played using the base_freq as the
+ * playback speed.
+ *
+ * The low_note and high_note fields define the minimum and maximum note
+ * frequencies for which this sample is valid. It is possible to define
+ * more than one samples for an instrument number at the same time. The
+ * low_note and high_note fields are used to select the most suitable one.
+ *
+ * The fields base_note, high_note and low_note should contain
+ * the note frequency multiplied by 1000. For example value for the
+ * middle A is 440*1000.
+ */
+
+		unsigned int base_freq;
+		unsigned int base_note;
+		unsigned int high_note;
+		unsigned int low_note;
+		int panning;	/* -128=left, 127=right */
+		int detuning;
+
+/*	New fields introduced in version 1.99.5	*/
+
+       /* Envelope. Enabled by mode bit WAVE_ENVELOPES	*/
+		unsigned char	env_rate[ 6 ];	 /* GUS HW ramping rate */
+		unsigned char	env_offset[ 6 ]; /* 255 == 100% */
+
+	/* 
+	 * The tremolo, vibrato and scale info are not supported yet.
+	 * Enable by setting the mode bits WAVE_TREMOLO, WAVE_VIBRATO or
+	 * WAVE_SCALE
+	 */
+
+		unsigned char	tremolo_sweep;
+		unsigned char	tremolo_rate;
+		unsigned char	tremolo_depth;
+	
+		unsigned char	vibrato_sweep;
+		unsigned char	vibrato_rate;
+		unsigned char	vibrato_depth;
+
+		int		scale_frequency;
+		unsigned int	scale_factor;		/* from 0 to 2048 or 0 to 2 */
+	
+	        int		volume;
+		int		fractions;
+		int		reserved1;
+	        int		spare[2];
+		char data[1];	/* The waveform data starts here */
+	};
+
+struct sysex_info {
+		short key;		/* Use SYSEX_PATCH or MAUI_PATCH here */
+#define SYSEX_PATCH	_PATCHKEY(0x05)
+#define MAUI_PATCH	_PATCHKEY(0x06)
+		short device_no;	/* Synthesizer number */
+		int len;	/* Size of the sysex data in bytes */
+		unsigned char data[1];	/* Sysex data starts here */
+	};
+
+/*
+ * /dev/sequencer input events.
+ *
+ * The data written to the /dev/sequencer is a stream of events. Events
+ * are records of 4 or 8 bytes. The first byte defines the size. 
+ * Any number of events can be written with a write call. There
+ * is a set of macros for sending these events. Use these macros if you
+ * want to maximize portability of your program.
+ *
+ * Events SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO. Are also input events.
+ * (All input events are currently 4 bytes long. Be prepared to support
+ * 8 byte events also. If you receive any event having first byte >= 128,
+ * it's a 8 byte event.
+ *
+ * The events are documented at the end of this file.
+ *
+ * Normal events (4 bytes)
+ * There is also a 8 byte version of most of the 4 byte events. The
+ * 8 byte one is recommended.
+ */
+#define SEQ_NOTEOFF		0
+#define SEQ_FMNOTEOFF		SEQ_NOTEOFF	/* Just old name */
+#define SEQ_NOTEON		1
+#define	SEQ_FMNOTEON		SEQ_NOTEON
+#define SEQ_WAIT		TMR_WAIT_ABS
+#define SEQ_PGMCHANGE		3
+#define SEQ_FMPGMCHANGE		SEQ_PGMCHANGE
+#define SEQ_SYNCTIMER		TMR_START
+#define SEQ_MIDIPUTC		5
+#define SEQ_DRUMON		6	/*** OBSOLETE ***/
+#define SEQ_DRUMOFF		7	/*** OBSOLETE ***/
+#define SEQ_ECHO		TMR_ECHO	/* For synching programs with output */
+#define SEQ_AFTERTOUCH		9
+#define SEQ_CONTROLLER		10
+
+/*******************************************
+ *	Midi controller numbers
+ *******************************************
+ * Controllers 0 to 31 (0x00 to 0x1f) and
+ * 32 to 63 (0x20 to 0x3f) are continuous
+ * controllers.
+ * In the MIDI 1.0 these controllers are sent using
+ * two messages. Controller numbers 0 to 31 are used
+ * to send the MSB and the controller numbers 32 to 63
+ * are for the LSB. Note that just 7 bits are used in MIDI bytes.
+ */
+
+#define	   CTL_BANK_SELECT		0x00
+#define	   CTL_MODWHEEL			0x01
+#define    CTL_BREATH			0x02
+/*		undefined		0x03 */
+#define    CTL_FOOT			0x04
+#define    CTL_PORTAMENTO_TIME		0x05
+#define    CTL_DATA_ENTRY		0x06
+#define    CTL_MAIN_VOLUME		0x07
+#define    CTL_BALANCE			0x08
+/*		undefined		0x09 */
+#define    CTL_PAN			0x0a
+#define    CTL_EXPRESSION		0x0b
+/*		undefined		0x0c */
+/*		undefined		0x0d */
+/*		undefined		0x0e */
+/*		undefined		0x0f */
+#define    CTL_GENERAL_PURPOSE1	0x10
+#define    CTL_GENERAL_PURPOSE2	0x11
+#define    CTL_GENERAL_PURPOSE3	0x12
+#define    CTL_GENERAL_PURPOSE4	0x13
+/*		undefined		0x14 - 0x1f */
+
+/*		undefined		0x20 */
+/* The controller numbers 0x21 to 0x3f are reserved for the */
+/* least significant bytes of the controllers 0x00 to 0x1f. */
+/* These controllers are not recognised by the driver. */
+
+/* Controllers 64 to 69 (0x40 to 0x45) are on/off switches. */
+/* 0=OFF and 127=ON (intermediate values are possible) */
+#define    CTL_DAMPER_PEDAL		0x40
+#define    CTL_SUSTAIN			0x40	/* Alias */
+#define    CTL_HOLD			0x40	/* Alias */
+#define    CTL_PORTAMENTO		0x41
+#define    CTL_SOSTENUTO		0x42
+#define    CTL_SOFT_PEDAL		0x43
+/*		undefined		0x44 */
+#define    CTL_HOLD2			0x45
+/*		undefined		0x46 - 0x4f */
+
+#define    CTL_GENERAL_PURPOSE5	0x50
+#define    CTL_GENERAL_PURPOSE6	0x51
+#define    CTL_GENERAL_PURPOSE7	0x52
+#define    CTL_GENERAL_PURPOSE8	0x53
+/*		undefined		0x54 - 0x5a */
+#define    CTL_EXT_EFF_DEPTH		0x5b
+#define    CTL_TREMOLO_DEPTH		0x5c
+#define    CTL_CHORUS_DEPTH		0x5d
+#define    CTL_DETUNE_DEPTH		0x5e
+#define    CTL_CELESTE_DEPTH		0x5e	/* Alias for the above one */
+#define    CTL_PHASER_DEPTH		0x5f
+#define    CTL_DATA_INCREMENT		0x60
+#define    CTL_DATA_DECREMENT		0x61
+#define    CTL_NONREG_PARM_NUM_LSB	0x62
+#define    CTL_NONREG_PARM_NUM_MSB	0x63
+#define    CTL_REGIST_PARM_NUM_LSB	0x64
+#define    CTL_REGIST_PARM_NUM_MSB	0x65
+/*		undefined		0x66 - 0x78 */
+/*		reserved		0x79 - 0x7f */
+
+/* Pseudo controllers (not midi compatible) */
+#define    CTRL_PITCH_BENDER		255
+#define    CTRL_PITCH_BENDER_RANGE	254
+#define    CTRL_EXPRESSION		253	/* Obsolete */
+#define    CTRL_MAIN_VOLUME		252	/* Obsolete */
+#define SEQ_BALANCE		11
+#define SEQ_VOLMODE             12
+
+/*
+ * Volume mode decides how volumes are used
+ */
+
+#define VOL_METHOD_ADAGIO	1
+#define VOL_METHOD_LINEAR	2
+
+/*
+ * Note! SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO are used also as
+ *	 input events.
+ */
+
+/*
+ * Event codes 0xf0 to 0xfc are reserved for future extensions.
+ */
+
+#define SEQ_FULLSIZE		0xfd	/* Long events */
+/*
+ *	SEQ_FULLSIZE events are used for loading patches/samples to the
+ *	synthesizer devices. These events are passed directly to the driver
+ *	of the associated synthesizer device. There is no limit to the size
+ *	of the extended events. These events are not queued but executed
+ *	immediately when the write() is called (execution can take several
+ *	seconds of time). 
+ *
+ *	When a SEQ_FULLSIZE message is written to the device, it must
+ *	be written using exactly one write() call. Other events cannot
+ *	be mixed to the same write.
+ *	
+ *	For FM synths (YM3812/OPL3) use struct sbi_instrument and write it to the 
+ *	/dev/sequencer. Don't write other data together with the instrument structure
+ *	Set the key field of the structure to FM_PATCH. The device field is used to
+ *	route the patch to the corresponding device.
+ *
+ *	For wave table use struct patch_info. Initialize the key field
+ *      to WAVE_PATCH.
+ */
+#define SEQ_PRIVATE		0xfe	/* Low level HW dependent events (8 bytes) */
+#define SEQ_EXTENDED		0xff	/* Extended events (8 bytes) OBSOLETE */
+
+/*
+ * Record for FM patches
+ */
+
+typedef unsigned char sbi_instr_data[32];
+
+struct sbi_instrument {
+		unsigned short	key;	/* FM_PATCH or OPL3_PATCH */
+#define FM_PATCH	_PATCHKEY(0x01)
+#define OPL3_PATCH	_PATCHKEY(0x03)
+		short		device;		/*	Synth# (0-4)	*/
+		int 		channel;	/*	Program# to be initialized 	*/
+		sbi_instr_data	operators;	/*	Register settings for operator cells (.SBI format)	*/
+	};
+
+struct synth_info {	/* Read only */
+		char	name[30];
+		int	device;		/* 0-N. INITIALIZE BEFORE CALLING */
+		int	synth_type;
+#define SYNTH_TYPE_FM			0
+#define SYNTH_TYPE_SAMPLE		1
+#define SYNTH_TYPE_MIDI			2	/* Midi interface */
+
+		int	synth_subtype;
+#define FM_TYPE_ADLIB			0x00
+#define FM_TYPE_OPL3			0x01
+#define MIDI_TYPE_MPU401		0x401
+
+#define SAMPLE_TYPE_BASIC		0x10
+#define SAMPLE_TYPE_GUS			SAMPLE_TYPE_BASIC
+#define SAMPLE_TYPE_WAVEFRONT           0x11
+
+		int	perc_mode;	/* No longer supported */
+		int	nr_voices;
+		int	nr_drums;	/* Obsolete field */
+		int	instr_bank_size;
+		unsigned int	capabilities;	
+#define SYNTH_CAP_PERCMODE		0x00000001 /* No longer used */
+#define SYNTH_CAP_OPL3			0x00000002 /* Set if OPL3 supported */
+#define SYNTH_CAP_INPUT			0x00000004 /* Input (MIDI) device */
+		int	dummies[19];	/* Reserve space */
+	};
+
+struct sound_timer_info {
+		char name[32];
+		int caps;
+	};
+
+#define MIDI_CAP_MPU401		1		/* MPU-401 intelligent mode */
+
+struct midi_info {
+		char		name[30];
+		int		device;		/* 0-N. INITIALIZE BEFORE CALLING */
+		unsigned int	capabilities;	/* To be defined later */
+		int		dev_type;
+		int		dummies[18];	/* Reserve space */
+	};
+
+/********************************************
+ * ioctl commands for the /dev/midi##
+ */
+typedef struct {
+		unsigned char cmd;
+		char nr_args, nr_returns;
+		unsigned char data[30];
+	} mpu_command_rec;
+
+#define SNDCTL_MIDI_PRETIME		_SIOWR('m', 0, int)
+#define SNDCTL_MIDI_MPUMODE		_SIOWR('m', 1, int)
+#define SNDCTL_MIDI_MPUCMD		_SIOWR('m', 2, mpu_command_rec)
+
+/********************************************
+ * IOCTL commands for /dev/dsp and /dev/audio
+ */
+
+#define SNDCTL_DSP_RESET		_SIO  ('P', 0)
+#define SNDCTL_DSP_SYNC			_SIO  ('P', 1)
+#define SNDCTL_DSP_SPEED		_SIOWR('P', 2, int)
+#define SNDCTL_DSP_STEREO		_SIOWR('P', 3, int)
+#define SNDCTL_DSP_GETBLKSIZE		_SIOWR('P', 4, int)
+#define SNDCTL_DSP_SAMPLESIZE		SNDCTL_DSP_SETFMT
+#define SNDCTL_DSP_CHANNELS		_SIOWR('P', 6, int)
+#define SOUND_PCM_WRITE_CHANNELS	SNDCTL_DSP_CHANNELS
+#define SOUND_PCM_WRITE_FILTER		_SIOWR('P', 7, int)
+#define SNDCTL_DSP_POST			_SIO  ('P', 8)
+#define SNDCTL_DSP_SUBDIVIDE		_SIOWR('P', 9, int)
+#define SNDCTL_DSP_SETFRAGMENT		_SIOWR('P',10, int)
+
+/*	Audio data formats (Note! U8=8 and S16_LE=16 for compatibility) */
+#define SNDCTL_DSP_GETFMTS		_SIOR ('P',11, int) /* Returns a mask */
+#define SNDCTL_DSP_SETFMT		_SIOWR('P',5, int) /* Selects ONE fmt*/
+#	define AFMT_QUERY		0x00000000	/* Return current fmt */
+#	define AFMT_MU_LAW		0x00000001
+#	define AFMT_A_LAW		0x00000002
+#	define AFMT_IMA_ADPCM		0x00000004
+#	define AFMT_U8			0x00000008
+#	define AFMT_S16_LE		0x00000010	/* Little endian signed 16*/
+#	define AFMT_S16_BE		0x00000020	/* Big endian signed 16 */
+#	define AFMT_S8			0x00000040
+#	define AFMT_U16_LE		0x00000080	/* Little endian U16 */
+#	define AFMT_U16_BE		0x00000100	/* Big endian U16 */
+#	define AFMT_MPEG		0x00000200	/* MPEG (2) audio */
+#	define AFMT_AC3		0x00000400	/* Dolby Digital AC3 */
+
+/*
+ * Buffer status queries.
+ */
+typedef struct audio_buf_info {
+			int fragments;	/* # of available fragments (partially usend ones not counted) */
+			int fragstotal;	/* Total # of fragments allocated */
+			int fragsize;	/* Size of a fragment in bytes */
+
+			int bytes;	/* Available space in bytes (includes partially used fragments) */
+			/* Note! 'bytes' could be more than fragments*fragsize */
+		} audio_buf_info;
+
+#define SNDCTL_DSP_GETOSPACE		_SIOR ('P',12, audio_buf_info)
+#define SNDCTL_DSP_GETISPACE		_SIOR ('P',13, audio_buf_info)
+#define SNDCTL_DSP_NONBLOCK		_SIO  ('P',14)
+#define SNDCTL_DSP_GETCAPS		_SIOR ('P',15, int)
+#	define DSP_CAP_REVISION		0x000000ff	/* Bits for revision level (0 to 255) */
+#	define DSP_CAP_DUPLEX		0x00000100	/* Full duplex record/playback */
+#	define DSP_CAP_REALTIME		0x00000200	/* Real time capability */
+#	define DSP_CAP_BATCH		0x00000400	/* Device has some kind of */
+							/* internal buffers which may */
+							/* cause some delays and */
+							/* decrease precision of timing */
+#	define DSP_CAP_COPROC		0x00000800	/* Has a coprocessor */
+							/* Sometimes it's a DSP */
+							/* but usually not */
+#	define DSP_CAP_TRIGGER		0x00001000	/* Supports SETTRIGGER */
+#	define DSP_CAP_MMAP		0x00002000	/* Supports mmap() */
+#	define DSP_CAP_MULTI		0x00004000	/* support multiple open */
+#	define DSP_CAP_BIND		0x00008000	/* channel binding to front/rear/cneter/lfe */
+
+
+#define SNDCTL_DSP_GETTRIGGER		_SIOR ('P',16, int)
+#define SNDCTL_DSP_SETTRIGGER		_SIOW ('P',16, int)
+#	define PCM_ENABLE_INPUT		0x00000001
+#	define PCM_ENABLE_OUTPUT		0x00000002
+
+typedef struct count_info {
+		int bytes;	/* Total # of bytes processed */
+		int blocks;	/* # of fragment transitions since last time */
+		int ptr;	/* Current DMA pointer value */
+	} count_info;
+
+#define SNDCTL_DSP_GETIPTR		_SIOR ('P',17, count_info)
+#define SNDCTL_DSP_GETOPTR		_SIOR ('P',18, count_info)
+
+typedef struct buffmem_desc {
+		unsigned *buffer;
+		int size;
+	} buffmem_desc;
+#define SNDCTL_DSP_MAPINBUF		_SIOR ('P', 19, buffmem_desc)
+#define SNDCTL_DSP_MAPOUTBUF		_SIOR ('P', 20, buffmem_desc)
+#define SNDCTL_DSP_SETSYNCRO		_SIO  ('P', 21)
+#define SNDCTL_DSP_SETDUPLEX		_SIO  ('P', 22)
+#define SNDCTL_DSP_GETODELAY		_SIOR ('P', 23, int)
+
+#define SNDCTL_DSP_GETCHANNELMASK		_SIOWR('P', 64, int)
+#define SNDCTL_DSP_BIND_CHANNEL		_SIOWR('P', 65, int)
+#	define DSP_BIND_QUERY		0x00000000
+#	define DSP_BIND_FRONT		0x00000001
+#	define DSP_BIND_SURR		0x00000002
+#	define DSP_BIND_CENTER_LFE	0x00000004
+#	define DSP_BIND_HANDSET		0x00000008
+#	define DSP_BIND_MIC		0x00000010
+#	define DSP_BIND_MODEM1		0x00000020
+#	define DSP_BIND_MODEM2		0x00000040
+#	define DSP_BIND_I2S		0x00000080
+#	define DSP_BIND_SPDIF		0x00000100
+
+#define SNDCTL_DSP_SETSPDIF		_SIOW ('P', 66, int)
+#define SNDCTL_DSP_GETSPDIF		_SIOR ('P', 67, int)
+#	define SPDIF_PRO	0x0001
+#	define SPDIF_N_AUD	0x0002
+#	define SPDIF_COPY	0x0004
+#	define SPDIF_PRE	0x0008
+#	define SPDIF_CC		0x07f0
+#	define SPDIF_L		0x0800
+#	define SPDIF_DRS	0x4000
+#	define SPDIF_V		0x8000
+
+/*
+ * Application's profile defines the way how playback underrun situations should be handled.
+ * 
+ *	APF_NORMAL (the default) and APF_NETWORK make the driver to cleanup the
+ *	playback buffer whenever an underrun occurs. This consumes some time
+ *	prevents looping the existing buffer.
+ *	APF_CPUINTENS is intended to be set by CPU intensive applications which
+ *	are likely to run out of time occasionally. In this mode the buffer cleanup is
+ *	disabled which saves CPU time but also let's the previous buffer content to
+ *	be played during the "pause" after the underrun.
+ */
+#define SNDCTL_DSP_PROFILE		_SIOW ('P', 23, int)
+#define	  APF_NORMAL	0	/* Normal applications */
+#define	  APF_NETWORK	1	/* Underruns probably caused by an "external" delay */
+#define   APF_CPUINTENS 2	/* Underruns probably caused by "overheating" the CPU */
+
+#define SOUND_PCM_READ_RATE		_SIOR ('P', 2, int)
+#define SOUND_PCM_READ_CHANNELS		_SIOR ('P', 6, int)
+#define SOUND_PCM_READ_BITS		_SIOR ('P', 5, int)
+#define SOUND_PCM_READ_FILTER		_SIOR ('P', 7, int)
+
+/* Some alias names */
+#define SOUND_PCM_WRITE_BITS		SNDCTL_DSP_SETFMT
+#define SOUND_PCM_WRITE_RATE		SNDCTL_DSP_SPEED
+#define SOUND_PCM_POST			SNDCTL_DSP_POST
+#define SOUND_PCM_RESET			SNDCTL_DSP_RESET
+#define SOUND_PCM_SYNC			SNDCTL_DSP_SYNC
+#define SOUND_PCM_SUBDIVIDE		SNDCTL_DSP_SUBDIVIDE
+#define SOUND_PCM_SETFRAGMENT		SNDCTL_DSP_SETFRAGMENT
+#define SOUND_PCM_GETFMTS		SNDCTL_DSP_GETFMTS
+#define SOUND_PCM_SETFMT		SNDCTL_DSP_SETFMT
+#define SOUND_PCM_GETOSPACE		SNDCTL_DSP_GETOSPACE
+#define SOUND_PCM_GETISPACE		SNDCTL_DSP_GETISPACE
+#define SOUND_PCM_NONBLOCK		SNDCTL_DSP_NONBLOCK
+#define SOUND_PCM_GETCAPS		SNDCTL_DSP_GETCAPS
+#define SOUND_PCM_GETTRIGGER		SNDCTL_DSP_GETTRIGGER
+#define SOUND_PCM_SETTRIGGER		SNDCTL_DSP_SETTRIGGER
+#define SOUND_PCM_SETSYNCRO		SNDCTL_DSP_SETSYNCRO
+#define SOUND_PCM_GETIPTR		SNDCTL_DSP_GETIPTR
+#define SOUND_PCM_GETOPTR		SNDCTL_DSP_GETOPTR
+#define SOUND_PCM_MAPINBUF		SNDCTL_DSP_MAPINBUF
+#define SOUND_PCM_MAPOUTBUF		SNDCTL_DSP_MAPOUTBUF
+
+/*
+ * ioctl calls to be used in communication with coprocessors and
+ * DSP chips.
+ */
+
+typedef struct copr_buffer {
+		int command;	/* Set to 0 if not used */
+		int flags;
+#define CPF_NONE		0x0000
+#define CPF_FIRST		0x0001	/* First block */
+#define CPF_LAST		0x0002	/* Last block */
+		int len;
+		int offs;	/* If required by the device (0 if not used) */
+
+		unsigned char data[4000]; /* NOTE! 4000 is not 4k */
+	} copr_buffer;
+
+typedef struct copr_debug_buf {
+		int command;	/* Used internally. Set to 0 */
+		int parm1;
+		int parm2;
+		int flags;	
+		int len;	/* Length of data in bytes */
+	} copr_debug_buf;
+
+typedef struct copr_msg {
+		int len;
+		unsigned char data[4000];
+	} copr_msg;
+
+#define SNDCTL_COPR_RESET             _SIO  ('C',  0)
+#define SNDCTL_COPR_LOAD	      _SIOWR('C',  1, copr_buffer)
+#define SNDCTL_COPR_RDATA	      _SIOWR('C',  2, copr_debug_buf)
+#define SNDCTL_COPR_RCODE	      _SIOWR('C',  3, copr_debug_buf)
+#define SNDCTL_COPR_WDATA	      _SIOW ('C',  4, copr_debug_buf)
+#define SNDCTL_COPR_WCODE	      _SIOW ('C',  5, copr_debug_buf)
+#define SNDCTL_COPR_RUN		      _SIOWR('C',  6, copr_debug_buf)
+#define SNDCTL_COPR_HALT	      _SIOWR('C',  7, copr_debug_buf)
+#define SNDCTL_COPR_SENDMSG	      _SIOWR('C',  8, copr_msg)
+#define SNDCTL_COPR_RCVMSG	      _SIOR ('C',  9, copr_msg)
+
+/*********************************************
+ * IOCTL commands for /dev/mixer
+ */
+	
+/* 
+ * Mixer devices
+ *
+ * There can be up to 20 different analog mixer channels. The
+ * SOUND_MIXER_NRDEVICES gives the currently supported maximum. 
+ * The SOUND_MIXER_READ_DEVMASK returns a bitmask which tells
+ * the devices supported by the particular mixer.
+ */
+
+#define SOUND_MIXER_NRDEVICES	25
+#define SOUND_MIXER_VOLUME	0
+#define SOUND_MIXER_BASS	1
+#define SOUND_MIXER_TREBLE	2
+#define SOUND_MIXER_SYNTH	3
+#define SOUND_MIXER_PCM		4
+#define SOUND_MIXER_SPEAKER	5
+#define SOUND_MIXER_LINE	6
+#define SOUND_MIXER_MIC		7
+#define SOUND_MIXER_CD		8
+#define SOUND_MIXER_IMIX	9	/*  Recording monitor  */
+#define SOUND_MIXER_ALTPCM	10
+#define SOUND_MIXER_RECLEV	11	/* Recording level */
+#define SOUND_MIXER_IGAIN	12	/* Input gain */
+#define SOUND_MIXER_OGAIN	13	/* Output gain */
+/* 
+ * The AD1848 codec and compatibles have three line level inputs
+ * (line, aux1 and aux2). Since each card manufacturer have assigned
+ * different meanings to these inputs, it's inpractical to assign
+ * specific meanings (line, cd, synth etc.) to them.
+ */
+#define SOUND_MIXER_LINE1	14	/* Input source 1  (aux1) */
+#define SOUND_MIXER_LINE2	15	/* Input source 2  (aux2) */
+#define SOUND_MIXER_LINE3	16	/* Input source 3  (line) */
+#define SOUND_MIXER_DIGITAL1	17	/* Digital (input) 1 */
+#define SOUND_MIXER_DIGITAL2	18	/* Digital (input) 2 */
+#define SOUND_MIXER_DIGITAL3	19	/* Digital (input) 3 */
+#define SOUND_MIXER_PHONEIN	20	/* Phone input */
+#define SOUND_MIXER_PHONEOUT	21	/* Phone output */
+#define SOUND_MIXER_VIDEO	22	/* Video/TV (audio) in */
+#define SOUND_MIXER_RADIO	23	/* Radio in */
+#define SOUND_MIXER_MONITOR	24	/* Monitor (usually mic) volume */
+
+/* Some on/off settings (SOUND_SPECIAL_MIN - SOUND_SPECIAL_MAX) */
+/* Not counted to SOUND_MIXER_NRDEVICES, but use the same number space */
+#define SOUND_ONOFF_MIN		28
+#define SOUND_ONOFF_MAX		30
+
+/* Note!	Number 31 cannot be used since the sign bit is reserved */
+#define SOUND_MIXER_NONE	31
+
+/*
+ * The following unsupported macros are no longer functional.
+ * Use SOUND_MIXER_PRIVATE# macros in future.
+ */
+#define SOUND_MIXER_ENHANCE	SOUND_MIXER_NONE
+#define SOUND_MIXER_MUTE	SOUND_MIXER_NONE
+#define SOUND_MIXER_LOUD	SOUND_MIXER_NONE
+
+
+#define SOUND_DEVICE_LABELS	{"Vol  ", "Bass ", "Trebl", "Synth", "Pcm  ", "Spkr ", "Line ", \
+				 "Mic  ", "CD   ", "Mix  ", "Pcm2 ", "Rec  ", "IGain", "OGain", \
+				 "Line1", "Line2", "Line3", "Digital1", "Digital2", "Digital3", \
+				 "PhoneIn", "PhoneOut", "Video", "Radio", "Monitor"}
+
+#define SOUND_DEVICE_NAMES	{"vol", "bass", "treble", "synth", "pcm", "speaker", "line", \
+				 "mic", "cd", "mix", "pcm2", "rec", "igain", "ogain", \
+				 "line1", "line2", "line3", "dig1", "dig2", "dig3", \
+				 "phin", "phout", "video", "radio", "monitor"}
+
+/*	Device bitmask identifiers	*/
+
+#define SOUND_MIXER_RECSRC	0xff	/* Arg contains a bit for each recording source */
+#define SOUND_MIXER_DEVMASK	0xfe	/* Arg contains a bit for each supported device */
+#define SOUND_MIXER_RECMASK	0xfd	/* Arg contains a bit for each supported recording source */
+#define SOUND_MIXER_CAPS	0xfc
+#	define SOUND_CAP_EXCL_INPUT	0x00000001	/* Only one recording source at a time */
+#define SOUND_MIXER_STEREODEVS	0xfb	/* Mixer channels supporting stereo */
+#define SOUND_MIXER_OUTSRC	0xfa	/* Arg contains a bit for each input source to output */
+#define SOUND_MIXER_OUTMASK	0xf9	/* Arg contains a bit for each supported input source to output */
+
+/*	Device mask bits	*/
+
+#define SOUND_MASK_VOLUME	(1 << SOUND_MIXER_VOLUME)
+#define SOUND_MASK_BASS		(1 << SOUND_MIXER_BASS)
+#define SOUND_MASK_TREBLE	(1 << SOUND_MIXER_TREBLE)
+#define SOUND_MASK_SYNTH	(1 << SOUND_MIXER_SYNTH)
+#define SOUND_MASK_PCM		(1 << SOUND_MIXER_PCM)
+#define SOUND_MASK_SPEAKER	(1 << SOUND_MIXER_SPEAKER)
+#define SOUND_MASK_LINE		(1 << SOUND_MIXER_LINE)
+#define SOUND_MASK_MIC		(1 << SOUND_MIXER_MIC)
+#define SOUND_MASK_CD		(1 << SOUND_MIXER_CD)
+#define SOUND_MASK_IMIX		(1 << SOUND_MIXER_IMIX)
+#define SOUND_MASK_ALTPCM	(1 << SOUND_MIXER_ALTPCM)
+#define SOUND_MASK_RECLEV	(1 << SOUND_MIXER_RECLEV)
+#define SOUND_MASK_IGAIN	(1 << SOUND_MIXER_IGAIN)
+#define SOUND_MASK_OGAIN	(1 << SOUND_MIXER_OGAIN)
+#define SOUND_MASK_LINE1	(1 << SOUND_MIXER_LINE1)
+#define SOUND_MASK_LINE2	(1 << SOUND_MIXER_LINE2)
+#define SOUND_MASK_LINE3	(1 << SOUND_MIXER_LINE3)
+#define SOUND_MASK_DIGITAL1	(1 << SOUND_MIXER_DIGITAL1)
+#define SOUND_MASK_DIGITAL2	(1 << SOUND_MIXER_DIGITAL2)
+#define SOUND_MASK_DIGITAL3	(1 << SOUND_MIXER_DIGITAL3)
+#define SOUND_MASK_PHONEIN	(1 << SOUND_MIXER_PHONEIN)
+#define SOUND_MASK_PHONEOUT	(1 << SOUND_MIXER_PHONEOUT)
+#define SOUND_MASK_RADIO	(1 << SOUND_MIXER_RADIO)
+#define SOUND_MASK_VIDEO	(1 << SOUND_MIXER_VIDEO)
+#define SOUND_MASK_MONITOR	(1 << SOUND_MIXER_MONITOR)
+
+/* Obsolete macros */
+#define SOUND_MASK_MUTE		(1 << SOUND_MIXER_MUTE)
+#define SOUND_MASK_ENHANCE	(1 << SOUND_MIXER_ENHANCE)
+#define SOUND_MASK_LOUD		(1 << SOUND_MIXER_LOUD)
+
+#define MIXER_READ(dev)		_SIOR('M', dev, int)
+#define SOUND_MIXER_READ_VOLUME		MIXER_READ(SOUND_MIXER_VOLUME)
+#define SOUND_MIXER_READ_BASS		MIXER_READ(SOUND_MIXER_BASS)
+#define SOUND_MIXER_READ_TREBLE		MIXER_READ(SOUND_MIXER_TREBLE)
+#define SOUND_MIXER_READ_SYNTH		MIXER_READ(SOUND_MIXER_SYNTH)
+#define SOUND_MIXER_READ_PCM		MIXER_READ(SOUND_MIXER_PCM)
+#define SOUND_MIXER_READ_SPEAKER	MIXER_READ(SOUND_MIXER_SPEAKER)
+#define SOUND_MIXER_READ_LINE		MIXER_READ(SOUND_MIXER_LINE)
+#define SOUND_MIXER_READ_MIC		MIXER_READ(SOUND_MIXER_MIC)
+#define SOUND_MIXER_READ_CD		MIXER_READ(SOUND_MIXER_CD)
+#define SOUND_MIXER_READ_IMIX		MIXER_READ(SOUND_MIXER_IMIX)
+#define SOUND_MIXER_READ_ALTPCM		MIXER_READ(SOUND_MIXER_ALTPCM)
+#define SOUND_MIXER_READ_RECLEV		MIXER_READ(SOUND_MIXER_RECLEV)
+#define SOUND_MIXER_READ_IGAIN		MIXER_READ(SOUND_MIXER_IGAIN)
+#define SOUND_MIXER_READ_OGAIN		MIXER_READ(SOUND_MIXER_OGAIN)
+#define SOUND_MIXER_READ_LINE1		MIXER_READ(SOUND_MIXER_LINE1)
+#define SOUND_MIXER_READ_LINE2		MIXER_READ(SOUND_MIXER_LINE2)
+#define SOUND_MIXER_READ_LINE3		MIXER_READ(SOUND_MIXER_LINE3)
+
+/* Obsolete macros */
+#define SOUND_MIXER_READ_MUTE		MIXER_READ(SOUND_MIXER_MUTE)
+#define SOUND_MIXER_READ_ENHANCE	MIXER_READ(SOUND_MIXER_ENHANCE)
+#define SOUND_MIXER_READ_LOUD		MIXER_READ(SOUND_MIXER_LOUD)
+
+#define SOUND_MIXER_READ_RECSRC		MIXER_READ(SOUND_MIXER_RECSRC)
+#define SOUND_MIXER_READ_DEVMASK	MIXER_READ(SOUND_MIXER_DEVMASK)
+#define SOUND_MIXER_READ_RECMASK	MIXER_READ(SOUND_MIXER_RECMASK)
+#define SOUND_MIXER_READ_STEREODEVS	MIXER_READ(SOUND_MIXER_STEREODEVS)
+#define SOUND_MIXER_READ_CAPS		MIXER_READ(SOUND_MIXER_CAPS)
+
+#define MIXER_WRITE(dev)		_SIOWR('M', dev, int)
+#define SOUND_MIXER_WRITE_VOLUME	MIXER_WRITE(SOUND_MIXER_VOLUME)
+#define SOUND_MIXER_WRITE_BASS		MIXER_WRITE(SOUND_MIXER_BASS)
+#define SOUND_MIXER_WRITE_TREBLE	MIXER_WRITE(SOUND_MIXER_TREBLE)
+#define SOUND_MIXER_WRITE_SYNTH		MIXER_WRITE(SOUND_MIXER_SYNTH)
+#define SOUND_MIXER_WRITE_PCM		MIXER_WRITE(SOUND_MIXER_PCM)
+#define SOUND_MIXER_WRITE_SPEAKER	MIXER_WRITE(SOUND_MIXER_SPEAKER)
+#define SOUND_MIXER_WRITE_LINE		MIXER_WRITE(SOUND_MIXER_LINE)
+#define SOUND_MIXER_WRITE_MIC		MIXER_WRITE(SOUND_MIXER_MIC)
+#define SOUND_MIXER_WRITE_CD		MIXER_WRITE(SOUND_MIXER_CD)
+#define SOUND_MIXER_WRITE_IMIX		MIXER_WRITE(SOUND_MIXER_IMIX)
+#define SOUND_MIXER_WRITE_ALTPCM	MIXER_WRITE(SOUND_MIXER_ALTPCM)
+#define SOUND_MIXER_WRITE_RECLEV	MIXER_WRITE(SOUND_MIXER_RECLEV)
+#define SOUND_MIXER_WRITE_IGAIN		MIXER_WRITE(SOUND_MIXER_IGAIN)
+#define SOUND_MIXER_WRITE_OGAIN		MIXER_WRITE(SOUND_MIXER_OGAIN)
+#define SOUND_MIXER_WRITE_LINE1		MIXER_WRITE(SOUND_MIXER_LINE1)
+#define SOUND_MIXER_WRITE_LINE2		MIXER_WRITE(SOUND_MIXER_LINE2)
+#define SOUND_MIXER_WRITE_LINE3		MIXER_WRITE(SOUND_MIXER_LINE3)
+
+/* Obsolete macros */
+#define SOUND_MIXER_WRITE_MUTE		MIXER_WRITE(SOUND_MIXER_MUTE)
+#define SOUND_MIXER_WRITE_ENHANCE	MIXER_WRITE(SOUND_MIXER_ENHANCE)
+#define SOUND_MIXER_WRITE_LOUD		MIXER_WRITE(SOUND_MIXER_LOUD)
+
+#define SOUND_MIXER_WRITE_RECSRC	MIXER_WRITE(SOUND_MIXER_RECSRC)
+
+typedef struct mixer_info
+{
+  char id[16];
+  char name[32];
+  int  modify_counter;
+  int fillers[10];
+} mixer_info;
+
+typedef struct _old_mixer_info /* Obsolete */
+{
+  char id[16];
+  char name[32];
+} _old_mixer_info;
+
+#define SOUND_MIXER_INFO		_SIOR ('M', 101, mixer_info)
+#define SOUND_OLD_MIXER_INFO		_SIOR ('M', 101, _old_mixer_info)
+
+/*
+ * A mechanism for accessing "proprietary" mixer features. This method
+ * permits passing 128 bytes of arbitrary data between a mixer application
+ * and the mixer driver. Interpretation of the record is defined by
+ * the particular mixer driver.
+ */
+typedef unsigned char mixer_record[128];
+
+#define SOUND_MIXER_ACCESS		_SIOWR('M', 102, mixer_record)
+
+/*
+ * Two ioctls for special souncard function
+ */
+#define SOUND_MIXER_AGC  _SIOWR('M', 103, int)
+#define SOUND_MIXER_3DSE  _SIOWR('M', 104, int)
+
+/*
+ * The SOUND_MIXER_PRIVATE# commands can be redefined by low level drivers.
+ * These features can be used when accessing device specific features.
+ */
+#define SOUND_MIXER_PRIVATE1		_SIOWR('M', 111, int)
+#define SOUND_MIXER_PRIVATE2		_SIOWR('M', 112, int)
+#define SOUND_MIXER_PRIVATE3		_SIOWR('M', 113, int)
+#define SOUND_MIXER_PRIVATE4		_SIOWR('M', 114, int)
+#define SOUND_MIXER_PRIVATE5		_SIOWR('M', 115, int)
+
+/*
+ * SOUND_MIXER_GETLEVELS and SOUND_MIXER_SETLEVELS calls can be used
+ * for querying current mixer settings from the driver and for loading
+ * default volume settings _prior_ activating the mixer (loading
+ * doesn't affect current state of the mixer hardware). These calls
+ * are for internal use only.
+ */
+
+typedef struct mixer_vol_table {
+  int num;	/* Index to volume table */
+  char name[32];
+  int levels[32];
+} mixer_vol_table;
+
+#define SOUND_MIXER_GETLEVELS		_SIOWR('M', 116, mixer_vol_table)
+#define SOUND_MIXER_SETLEVELS		_SIOWR('M', 117, mixer_vol_table)
+
+/* 
+ * An ioctl for identifying the driver version. It will return value
+ * of the SOUND_VERSION macro used when compiling the driver.
+ * This call was introduced in OSS version 3.6 and it will not work
+ * with earlier versions (returns EINVAL).
+ */
+#define OSS_GETVERSION			_SIOR ('M', 118, int)
+
+/*
+ * Level 2 event types for /dev/sequencer
+ */
+
+/*
+ * The 4 most significant bits of byte 0 specify the class of
+ * the event: 
+ *
+ *	0x8X = system level events,
+ *	0x9X = device/port specific events, event[1] = device/port,
+ *		The last 4 bits give the subtype:
+ *			0x02	= Channel event (event[3] = chn).
+ *			0x01	= note event (event[4] = note).
+ *			(0x01 is not used alone but always with bit 0x02).
+ *	       event[2] = MIDI message code (0x80=note off etc.)
+ *
+ */
+
+#define EV_SEQ_LOCAL		0x80
+#define EV_TIMING		0x81
+#define EV_CHN_COMMON		0x92
+#define EV_CHN_VOICE		0x93
+#define EV_SYSEX		0x94
+/*
+ * Event types 200 to 220 are reserved for application use.
+ * These numbers will not be used by the driver.
+ */
+
+/*
+ * Events for event type EV_CHN_VOICE
+ */
+
+#define MIDI_NOTEOFF		0x80
+#define MIDI_NOTEON		0x90
+#define MIDI_KEY_PRESSURE	0xA0
+
+/*
+ * Events for event type EV_CHN_COMMON
+ */
+
+#define MIDI_CTL_CHANGE		0xB0
+#define MIDI_PGM_CHANGE		0xC0
+#define MIDI_CHN_PRESSURE	0xD0
+#define MIDI_PITCH_BEND		0xE0
+
+#define MIDI_SYSTEM_PREFIX	0xF0
+
+/*
+ * Timer event types
+ */
+#define TMR_WAIT_REL		1	/* Time relative to the prev time */
+#define TMR_WAIT_ABS		2	/* Absolute time since TMR_START */
+#define TMR_STOP		3
+#define TMR_START		4
+#define TMR_CONTINUE		5
+#define TMR_TEMPO		6
+#define TMR_ECHO		8
+#define TMR_CLOCK		9	/* MIDI clock */
+#define TMR_SPP			10	/* Song position pointer */
+#define TMR_TIMESIG		11	/* Time signature */
+
+/*
+ *	Local event types
+ */
+#define LOCL_STARTAUDIO		1
+
+#if !defined(__KERNEL__) || defined(USE_SEQ_MACROS)
+/*
+ *	Some convenience macros to simplify programming of the
+ *	/dev/sequencer interface
+ *
+ *	This is a legacy interface for applications written against
+ *	the OSSlib-3.8 style interface. It is no longer possible
+ *	to actually link against OSSlib with this header, but we
+ *	still provide these macros for programs using them.
+ *
+ *	If you want to use OSSlib, it is recommended that you get
+ *	the GPL version of OSS-4.x and build against that version
+ *	of the header.
+ *
+ *	We redefine the extern keyword so that make headers_check
+ *	does not complain about SEQ_USE_EXTBUF.
+ */
+#define SEQ_DECLAREBUF()		SEQ_USE_EXTBUF()
+
+void seqbuf_dump(void);	/* This function must be provided by programs */
+
+#define SEQ_PM_DEFINES int __foo_bar___
+
+#define SEQ_LOAD_GMINSTR(dev, instr)
+#define SEQ_LOAD_GMDRUM(dev, drum)
+
+#define _SEQ_EXTERN extern
+#define SEQ_USE_EXTBUF() \
+		_SEQ_EXTERN unsigned char _seqbuf[]; \
+		_SEQ_EXTERN int _seqbuflen; _SEQ_EXTERN int _seqbufptr
+
+#ifndef USE_SIMPLE_MACROS
+/* Sample seqbuf_dump() implementation:
+ *
+ *	SEQ_DEFINEBUF (2048);	-- Defines a buffer for 2048 bytes
+ *
+ *	int seqfd;		-- The file descriptor for /dev/sequencer.
+ *
+ *	void
+ *	seqbuf_dump ()
+ *	{
+ *	  if (_seqbufptr)
+ *	    if (write (seqfd, _seqbuf, _seqbufptr) == -1)
+ *	      {
+ *		perror ("write /dev/sequencer");
+ *		exit (-1);
+ *	      }
+ *	  _seqbufptr = 0;
+ *	}
+ */
+
+#define SEQ_DEFINEBUF(len)		unsigned char _seqbuf[len]; int _seqbuflen = len;int _seqbufptr = 0
+#define _SEQ_NEEDBUF(len)		if ((_seqbufptr+(len)) > _seqbuflen) seqbuf_dump()
+#define _SEQ_ADVBUF(len)		_seqbufptr += len
+#define SEQ_DUMPBUF			seqbuf_dump
+#else
+/*
+ * This variation of the sequencer macros is used just to format one event
+ * using fixed buffer.
+ * 
+ * The program using the macro library must define the following macros before
+ * using this library.
+ *
+ * #define _seqbuf 		 name of the buffer (unsigned char[]) 
+ * #define _SEQ_ADVBUF(len)	 If the applic needs to know the exact
+ *				 size of the event, this macro can be used.
+ *				 Otherwise this must be defined as empty.
+ * #define _seqbufptr		 Define the name of index variable or 0 if
+ *				 not required. 
+ */
+#define _SEQ_NEEDBUF(len)	/* empty */
+#endif
+
+#define SEQ_VOLUME_MODE(dev, mode)	{_SEQ_NEEDBUF(8);\
+					_seqbuf[_seqbufptr] = SEQ_EXTENDED;\
+					_seqbuf[_seqbufptr+1] = SEQ_VOLMODE;\
+					_seqbuf[_seqbufptr+2] = (dev);\
+					_seqbuf[_seqbufptr+3] = (mode);\
+					_seqbuf[_seqbufptr+4] = 0;\
+					_seqbuf[_seqbufptr+5] = 0;\
+					_seqbuf[_seqbufptr+6] = 0;\
+					_seqbuf[_seqbufptr+7] = 0;\
+					_SEQ_ADVBUF(8);}
+
+/*
+ * Midi voice messages
+ */
+
+#define _CHN_VOICE(dev, event, chn, note, parm) \
+					{_SEQ_NEEDBUF(8);\
+					_seqbuf[_seqbufptr] = EV_CHN_VOICE;\
+					_seqbuf[_seqbufptr+1] = (dev);\
+					_seqbuf[_seqbufptr+2] = (event);\
+					_seqbuf[_seqbufptr+3] = (chn);\
+					_seqbuf[_seqbufptr+4] = (note);\
+					_seqbuf[_seqbufptr+5] = (parm);\
+					_seqbuf[_seqbufptr+6] = (0);\
+					_seqbuf[_seqbufptr+7] = 0;\
+					_SEQ_ADVBUF(8);}
+
+#define SEQ_START_NOTE(dev, chn, note, vol) \
+		_CHN_VOICE(dev, MIDI_NOTEON, chn, note, vol)
+
+#define SEQ_STOP_NOTE(dev, chn, note, vol) \
+		_CHN_VOICE(dev, MIDI_NOTEOFF, chn, note, vol)
+
+#define SEQ_KEY_PRESSURE(dev, chn, note, pressure) \
+		_CHN_VOICE(dev, MIDI_KEY_PRESSURE, chn, note, pressure)
+
+/*
+ * Midi channel messages
+ */
+
+#define _CHN_COMMON(dev, event, chn, p1, p2, w14) \
+					{_SEQ_NEEDBUF(8);\
+					_seqbuf[_seqbufptr] = EV_CHN_COMMON;\
+					_seqbuf[_seqbufptr+1] = (dev);\
+					_seqbuf[_seqbufptr+2] = (event);\
+					_seqbuf[_seqbufptr+3] = (chn);\
+					_seqbuf[_seqbufptr+4] = (p1);\
+					_seqbuf[_seqbufptr+5] = (p2);\
+					*(short *)&_seqbuf[_seqbufptr+6] = (w14);\
+					_SEQ_ADVBUF(8);}
+/*
+ * SEQ_SYSEX permits sending of sysex messages. (It may look that it permits
+ * sending any MIDI bytes but it's absolutely not possible. Trying to do
+ * so _will_ cause problems with MPU401 intelligent mode).
+ *
+ * Sysex messages are sent in blocks of 1 to 6 bytes. Longer messages must be 
+ * sent by calling SEQ_SYSEX() several times (there must be no other events
+ * between them). First sysex fragment must have 0xf0 in the first byte
+ * and the last byte (buf[len-1] of the last fragment must be 0xf7. No byte
+ * between these sysex start and end markers cannot be larger than 0x7f. Also
+ * lengths of each fragments (except the last one) must be 6.
+ *
+ * Breaking the above rules may work with some MIDI ports but is likely to
+ * cause fatal problems with some other devices (such as MPU401).
+ */
+#define SEQ_SYSEX(dev, buf, len) \
+					{int ii, ll=(len); \
+					 unsigned char *bufp=buf;\
+					 if (ll>6)ll=6;\
+					_SEQ_NEEDBUF(8);\
+					_seqbuf[_seqbufptr] = EV_SYSEX;\
+					_seqbuf[_seqbufptr+1] = (dev);\
+					for(ii=0;ii<ll;ii++)\
+					   _seqbuf[_seqbufptr+ii+2] = bufp[ii];\
+					for(ii=ll;ii<6;ii++)\
+					   _seqbuf[_seqbufptr+ii+2] = 0xff;\
+					_SEQ_ADVBUF(8);}
+
+#define SEQ_CHN_PRESSURE(dev, chn, pressure) \
+		_CHN_COMMON(dev, MIDI_CHN_PRESSURE, chn, pressure, 0, 0)
+
+#define SEQ_SET_PATCH SEQ_PGM_CHANGE
+#define SEQ_PGM_CHANGE(dev, chn, patch) \
+		_CHN_COMMON(dev, MIDI_PGM_CHANGE, chn, patch, 0, 0)
+
+#define SEQ_CONTROL(dev, chn, controller, value) \
+		_CHN_COMMON(dev, MIDI_CTL_CHANGE, chn, controller, 0, value)
+
+#define SEQ_BENDER(dev, chn, value) \
+		_CHN_COMMON(dev, MIDI_PITCH_BEND, chn, 0, 0, value)
+
+
+#define SEQ_V2_X_CONTROL(dev, voice, controller, value)	{_SEQ_NEEDBUF(8);\
+					_seqbuf[_seqbufptr] = SEQ_EXTENDED;\
+					_seqbuf[_seqbufptr+1] = SEQ_CONTROLLER;\
+					_seqbuf[_seqbufptr+2] = (dev);\
+					_seqbuf[_seqbufptr+3] = (voice);\
+					_seqbuf[_seqbufptr+4] = (controller);\
+					_seqbuf[_seqbufptr+5] = ((value)&0xff);\
+					_seqbuf[_seqbufptr+6] = ((value>>8)&0xff);\
+					_seqbuf[_seqbufptr+7] = 0;\
+					_SEQ_ADVBUF(8);}
+/*
+ * The following 5 macros are incorrectly implemented and obsolete.
+ * Use SEQ_BENDER and SEQ_CONTROL (with proper controller) instead.
+ */
+#define SEQ_PITCHBEND(dev, voice, value) SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER, value)
+#define SEQ_BENDER_RANGE(dev, voice, value) SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER_RANGE, value)
+#define SEQ_EXPRESSION(dev, voice, value) SEQ_CONTROL(dev, voice, CTL_EXPRESSION, value*128)
+#define SEQ_MAIN_VOLUME(dev, voice, value) SEQ_CONTROL(dev, voice, CTL_MAIN_VOLUME, (value*16383)/100)
+#define SEQ_PANNING(dev, voice, pos) SEQ_CONTROL(dev, voice, CTL_PAN, (pos+128) / 2)
+
+/*
+ * Timing and synchronization macros
+ */
+
+#define _TIMER_EVENT(ev, parm)		{_SEQ_NEEDBUF(8);\
+				 	_seqbuf[_seqbufptr+0] = EV_TIMING; \
+				 	_seqbuf[_seqbufptr+1] = (ev); \
+					_seqbuf[_seqbufptr+2] = 0;\
+					_seqbuf[_seqbufptr+3] = 0;\
+				 	*(unsigned int *)&_seqbuf[_seqbufptr+4] = (parm); \
+					_SEQ_ADVBUF(8);}
+
+#define SEQ_START_TIMER()		_TIMER_EVENT(TMR_START, 0)
+#define SEQ_STOP_TIMER()		_TIMER_EVENT(TMR_STOP, 0)
+#define SEQ_CONTINUE_TIMER()		_TIMER_EVENT(TMR_CONTINUE, 0)
+#define SEQ_WAIT_TIME(ticks)		_TIMER_EVENT(TMR_WAIT_ABS, ticks)
+#define SEQ_DELTA_TIME(ticks)		_TIMER_EVENT(TMR_WAIT_REL, ticks)
+#define SEQ_ECHO_BACK(key)		_TIMER_EVENT(TMR_ECHO, key)
+#define SEQ_SET_TEMPO(value)		_TIMER_EVENT(TMR_TEMPO, value)
+#define SEQ_SONGPOS(pos)		_TIMER_EVENT(TMR_SPP, pos)
+#define SEQ_TIME_SIGNATURE(sig)		_TIMER_EVENT(TMR_TIMESIG, sig)
+
+/*
+ * Local control events
+ */
+
+#define _LOCAL_EVENT(ev, parm)		{_SEQ_NEEDBUF(8);\
+				 	_seqbuf[_seqbufptr+0] = EV_SEQ_LOCAL; \
+				 	_seqbuf[_seqbufptr+1] = (ev); \
+					_seqbuf[_seqbufptr+2] = 0;\
+					_seqbuf[_seqbufptr+3] = 0;\
+				 	*(unsigned int *)&_seqbuf[_seqbufptr+4] = (parm); \
+					_SEQ_ADVBUF(8);}
+
+#define SEQ_PLAYAUDIO(devmask)		_LOCAL_EVENT(LOCL_STARTAUDIO, devmask)
+/*
+ * Events for the level 1 interface only 
+ */
+
+#define SEQ_MIDIOUT(device, byte)	{_SEQ_NEEDBUF(4);\
+					_seqbuf[_seqbufptr] = SEQ_MIDIPUTC;\
+					_seqbuf[_seqbufptr+1] = (byte);\
+					_seqbuf[_seqbufptr+2] = (device);\
+					_seqbuf[_seqbufptr+3] = 0;\
+					_SEQ_ADVBUF(4);}
+
+/*
+ * Patch loading.
+ */
+#define SEQ_WRPATCH(patchx, len) \
+		{if (_seqbufptr) SEQ_DUMPBUF();\
+		 if (write(seqfd, (char*)(patchx), len)==-1) \
+		    perror("Write patch: /dev/sequencer");}
+#define SEQ_WRPATCH2(patchx, len) \
+		(SEQ_DUMPBUF(), write(seqfd, (char*)(patchx), len))
+
+#endif
+#endif /* _UAPISOUNDCARD_H */
diff --git a/include/uapi/linux/stat.h b/include/uapi/linux/stat.h
new file mode 100644
index 00000000000..7fec7e36d92
--- /dev/null
+++ b/include/uapi/linux/stat.h
@@ -0,0 +1,45 @@
+#ifndef _UAPI_LINUX_STAT_H
+#define _UAPI_LINUX_STAT_H
+
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#define S_IFMT  00170000
+#define S_IFSOCK 0140000
+#define S_IFLNK	 0120000
+#define S_IFREG  0100000
+#define S_IFBLK  0060000
+#define S_IFDIR  0040000
+#define S_IFCHR  0020000
+#define S_IFIFO  0010000
+#define S_ISUID  0004000
+#define S_ISGID  0002000
+#define S_ISVTX  0001000
+
+#define S_ISLNK(m)	(((m) & S_IFMT) == S_IFLNK)
+#define S_ISREG(m)	(((m) & S_IFMT) == S_IFREG)
+#define S_ISDIR(m)	(((m) & S_IFMT) == S_IFDIR)
+#define S_ISCHR(m)	(((m) & S_IFMT) == S_IFCHR)
+#define S_ISBLK(m)	(((m) & S_IFMT) == S_IFBLK)
+#define S_ISFIFO(m)	(((m) & S_IFMT) == S_IFIFO)
+#define S_ISSOCK(m)	(((m) & S_IFMT) == S_IFSOCK)
+
+#define S_IRWXU 00700
+#define S_IRUSR 00400
+#define S_IWUSR 00200
+#define S_IXUSR 00100
+
+#define S_IRWXG 00070
+#define S_IRGRP 00040
+#define S_IWGRP 00020
+#define S_IXGRP 00010
+
+#define S_IRWXO 00007
+#define S_IROTH 00004
+#define S_IWOTH 00002
+#define S_IXOTH 00001
+
+#endif
+
+
+#endif /* _UAPI_LINUX_STAT_H */
diff --git a/include/uapi/linux/stddef.h b/include/uapi/linux/stddef.h
new file mode 100644
index 00000000000..aa9f1042874
--- /dev/null
+++ b/include/uapi/linux/stddef.h
@@ -0,0 +1 @@
+#include <linux/compiler.h>
diff --git a/include/uapi/linux/string.h b/include/uapi/linux/string.h
new file mode 100644
index 00000000000..e32e545cff5
--- /dev/null
+++ b/include/uapi/linux/string.h
@@ -0,0 +1,9 @@
+#ifndef _UAPI_LINUX_STRING_H_
+#define _UAPI_LINUX_STRING_H_
+
+/* We don't want strings.h stuff being used by user stuff by accident */
+
+#ifndef __KERNEL__
+#include <string.h>
+#endif /* __KERNEL__ */
+#endif /* _UAPI_LINUX_STRING_H_ */
diff --git a/include/uapi/linux/suspend_ioctls.h b/include/uapi/linux/suspend_ioctls.h
new file mode 100644
index 00000000000..0b30382984f
--- /dev/null
+++ b/include/uapi/linux/suspend_ioctls.h
@@ -0,0 +1,33 @@
+#ifndef _LINUX_SUSPEND_IOCTLS_H
+#define _LINUX_SUSPEND_IOCTLS_H
+
+#include <linux/types.h>
+/*
+ * This structure is used to pass the values needed for the identification
+ * of the resume swap area from a user space to the kernel via the
+ * SNAPSHOT_SET_SWAP_AREA ioctl
+ */
+struct resume_swap_area {
+	__kernel_loff_t offset;
+	__u32 dev;
+} __attribute__((packed));
+
+#define SNAPSHOT_IOC_MAGIC	'3'
+#define SNAPSHOT_FREEZE			_IO(SNAPSHOT_IOC_MAGIC, 1)
+#define SNAPSHOT_UNFREEZE		_IO(SNAPSHOT_IOC_MAGIC, 2)
+#define SNAPSHOT_ATOMIC_RESTORE		_IO(SNAPSHOT_IOC_MAGIC, 4)
+#define SNAPSHOT_FREE			_IO(SNAPSHOT_IOC_MAGIC, 5)
+#define SNAPSHOT_FREE_SWAP_PAGES	_IO(SNAPSHOT_IOC_MAGIC, 9)
+#define SNAPSHOT_S2RAM			_IO(SNAPSHOT_IOC_MAGIC, 11)
+#define SNAPSHOT_SET_SWAP_AREA		_IOW(SNAPSHOT_IOC_MAGIC, 13, \
+							struct resume_swap_area)
+#define SNAPSHOT_GET_IMAGE_SIZE		_IOR(SNAPSHOT_IOC_MAGIC, 14, __kernel_loff_t)
+#define SNAPSHOT_PLATFORM_SUPPORT	_IO(SNAPSHOT_IOC_MAGIC, 15)
+#define SNAPSHOT_POWER_OFF		_IO(SNAPSHOT_IOC_MAGIC, 16)
+#define SNAPSHOT_CREATE_IMAGE		_IOW(SNAPSHOT_IOC_MAGIC, 17, int)
+#define SNAPSHOT_PREF_IMAGE_SIZE	_IO(SNAPSHOT_IOC_MAGIC, 18)
+#define SNAPSHOT_AVAIL_SWAP_SIZE	_IOR(SNAPSHOT_IOC_MAGIC, 19, __kernel_loff_t)
+#define SNAPSHOT_ALLOC_SWAP_PAGE	_IOR(SNAPSHOT_IOC_MAGIC, 20, __kernel_loff_t)
+#define SNAPSHOT_IOC_MAXNR	20
+
+#endif /* _LINUX_SUSPEND_IOCTLS_H */
diff --git a/include/uapi/linux/swab.h b/include/uapi/linux/swab.h
new file mode 100644
index 00000000000..e811474724c
--- /dev/null
+++ b/include/uapi/linux/swab.h
@@ -0,0 +1,282 @@
+#ifndef _UAPI_LINUX_SWAB_H
+#define _UAPI_LINUX_SWAB_H
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <asm/swab.h>
+
+/*
+ * casts are necessary for constants, because we never know how for sure
+ * how U/UL/ULL map to __u16, __u32, __u64. At least not in a portable way.
+ */
+#define ___constant_swab16(x) ((__u16)(				\
+	(((__u16)(x) & (__u16)0x00ffU) << 8) |			\
+	(((__u16)(x) & (__u16)0xff00U) >> 8)))
+
+#define ___constant_swab32(x) ((__u32)(				\
+	(((__u32)(x) & (__u32)0x000000ffUL) << 24) |		\
+	(((__u32)(x) & (__u32)0x0000ff00UL) <<  8) |		\
+	(((__u32)(x) & (__u32)0x00ff0000UL) >>  8) |		\
+	(((__u32)(x) & (__u32)0xff000000UL) >> 24)))
+
+#define ___constant_swab64(x) ((__u64)(				\
+	(((__u64)(x) & (__u64)0x00000000000000ffULL) << 56) |	\
+	(((__u64)(x) & (__u64)0x000000000000ff00ULL) << 40) |	\
+	(((__u64)(x) & (__u64)0x0000000000ff0000ULL) << 24) |	\
+	(((__u64)(x) & (__u64)0x00000000ff000000ULL) <<  8) |	\
+	(((__u64)(x) & (__u64)0x000000ff00000000ULL) >>  8) |	\
+	(((__u64)(x) & (__u64)0x0000ff0000000000ULL) >> 24) |	\
+	(((__u64)(x) & (__u64)0x00ff000000000000ULL) >> 40) |	\
+	(((__u64)(x) & (__u64)0xff00000000000000ULL) >> 56)))
+
+#define ___constant_swahw32(x) ((__u32)(			\
+	(((__u32)(x) & (__u32)0x0000ffffUL) << 16) |		\
+	(((__u32)(x) & (__u32)0xffff0000UL) >> 16)))
+
+#define ___constant_swahb32(x) ((__u32)(			\
+	(((__u32)(x) & (__u32)0x00ff00ffUL) << 8) |		\
+	(((__u32)(x) & (__u32)0xff00ff00UL) >> 8)))
+
+/*
+ * Implement the following as inlines, but define the interface using
+ * macros to allow constant folding when possible:
+ * ___swab16, ___swab32, ___swab64, ___swahw32, ___swahb32
+ */
+
+static inline __attribute_const__ __u16 __fswab16(__u16 val)
+{
+#ifdef __arch_swab16
+	return __arch_swab16(val);
+#else
+	return ___constant_swab16(val);
+#endif
+}
+
+static inline __attribute_const__ __u32 __fswab32(__u32 val)
+{
+#ifdef __arch_swab32
+	return __arch_swab32(val);
+#else
+	return ___constant_swab32(val);
+#endif
+}
+
+static inline __attribute_const__ __u64 __fswab64(__u64 val)
+{
+#ifdef __arch_swab64
+	return __arch_swab64(val);
+#elif defined(__SWAB_64_THRU_32__)
+	__u32 h = val >> 32;
+	__u32 l = val & ((1ULL << 32) - 1);
+	return (((__u64)__fswab32(l)) << 32) | ((__u64)(__fswab32(h)));
+#else
+	return ___constant_swab64(val);
+#endif
+}
+
+static inline __attribute_const__ __u32 __fswahw32(__u32 val)
+{
+#ifdef __arch_swahw32
+	return __arch_swahw32(val);
+#else
+	return ___constant_swahw32(val);
+#endif
+}
+
+static inline __attribute_const__ __u32 __fswahb32(__u32 val)
+{
+#ifdef __arch_swahb32
+	return __arch_swahb32(val);
+#else
+	return ___constant_swahb32(val);
+#endif
+}
+
+/**
+ * __swab16 - return a byteswapped 16-bit value
+ * @x: value to byteswap
+ */
+#define __swab16(x)				\
+	(__builtin_constant_p((__u16)(x)) ?	\
+	___constant_swab16(x) :			\
+	__fswab16(x))
+
+/**
+ * __swab32 - return a byteswapped 32-bit value
+ * @x: value to byteswap
+ */
+#define __swab32(x)				\
+	(__builtin_constant_p((__u32)(x)) ?	\
+	___constant_swab32(x) :			\
+	__fswab32(x))
+
+/**
+ * __swab64 - return a byteswapped 64-bit value
+ * @x: value to byteswap
+ */
+#define __swab64(x)				\
+	(__builtin_constant_p((__u64)(x)) ?	\
+	___constant_swab64(x) :			\
+	__fswab64(x))
+
+/**
+ * __swahw32 - return a word-swapped 32-bit value
+ * @x: value to wordswap
+ *
+ * __swahw32(0x12340000) is 0x00001234
+ */
+#define __swahw32(x)				\
+	(__builtin_constant_p((__u32)(x)) ?	\
+	___constant_swahw32(x) :		\
+	__fswahw32(x))
+
+/**
+ * __swahb32 - return a high and low byte-swapped 32-bit value
+ * @x: value to byteswap
+ *
+ * __swahb32(0x12345678) is 0x34127856
+ */
+#define __swahb32(x)				\
+	(__builtin_constant_p((__u32)(x)) ?	\
+	___constant_swahb32(x) :		\
+	__fswahb32(x))
+
+/**
+ * __swab16p - return a byteswapped 16-bit value from a pointer
+ * @p: pointer to a naturally-aligned 16-bit value
+ */
+static inline __u16 __swab16p(const __u16 *p)
+{
+#ifdef __arch_swab16p
+	return __arch_swab16p(p);
+#else
+	return __swab16(*p);
+#endif
+}
+
+/**
+ * __swab32p - return a byteswapped 32-bit value from a pointer
+ * @p: pointer to a naturally-aligned 32-bit value
+ */
+static inline __u32 __swab32p(const __u32 *p)
+{
+#ifdef __arch_swab32p
+	return __arch_swab32p(p);
+#else
+	return __swab32(*p);
+#endif
+}
+
+/**
+ * __swab64p - return a byteswapped 64-bit value from a pointer
+ * @p: pointer to a naturally-aligned 64-bit value
+ */
+static inline __u64 __swab64p(const __u64 *p)
+{
+#ifdef __arch_swab64p
+	return __arch_swab64p(p);
+#else
+	return __swab64(*p);
+#endif
+}
+
+/**
+ * __swahw32p - return a wordswapped 32-bit value from a pointer
+ * @p: pointer to a naturally-aligned 32-bit value
+ *
+ * See __swahw32() for details of wordswapping.
+ */
+static inline __u32 __swahw32p(const __u32 *p)
+{
+#ifdef __arch_swahw32p
+	return __arch_swahw32p(p);
+#else
+	return __swahw32(*p);
+#endif
+}
+
+/**
+ * __swahb32p - return a high and low byteswapped 32-bit value from a pointer
+ * @p: pointer to a naturally-aligned 32-bit value
+ *
+ * See __swahb32() for details of high/low byteswapping.
+ */
+static inline __u32 __swahb32p(const __u32 *p)
+{
+#ifdef __arch_swahb32p
+	return __arch_swahb32p(p);
+#else
+	return __swahb32(*p);
+#endif
+}
+
+/**
+ * __swab16s - byteswap a 16-bit value in-place
+ * @p: pointer to a naturally-aligned 16-bit value
+ */
+static inline void __swab16s(__u16 *p)
+{
+#ifdef __arch_swab16s
+	__arch_swab16s(p);
+#else
+	*p = __swab16p(p);
+#endif
+}
+/**
+ * __swab32s - byteswap a 32-bit value in-place
+ * @p: pointer to a naturally-aligned 32-bit value
+ */
+static inline void __swab32s(__u32 *p)
+{
+#ifdef __arch_swab32s
+	__arch_swab32s(p);
+#else
+	*p = __swab32p(p);
+#endif
+}
+
+/**
+ * __swab64s - byteswap a 64-bit value in-place
+ * @p: pointer to a naturally-aligned 64-bit value
+ */
+static inline void __swab64s(__u64 *p)
+{
+#ifdef __arch_swab64s
+	__arch_swab64s(p);
+#else
+	*p = __swab64p(p);
+#endif
+}
+
+/**
+ * __swahw32s - wordswap a 32-bit value in-place
+ * @p: pointer to a naturally-aligned 32-bit value
+ *
+ * See __swahw32() for details of wordswapping
+ */
+static inline void __swahw32s(__u32 *p)
+{
+#ifdef __arch_swahw32s
+	__arch_swahw32s(p);
+#else
+	*p = __swahw32p(p);
+#endif
+}
+
+/**
+ * __swahb32s - high and low byteswap a 32-bit value in-place
+ * @p: pointer to a naturally-aligned 32-bit value
+ *
+ * See __swahb32() for details of high and low byte swapping
+ */
+static inline void __swahb32s(__u32 *p)
+{
+#ifdef __arch_swahb32s
+	__arch_swahb32s(p);
+#else
+	*p = __swahb32p(p);
+#endif
+}
+
+
+#endif /* _UAPI_LINUX_SWAB_H */
diff --git a/include/uapi/linux/synclink.h b/include/uapi/linux/synclink.h
new file mode 100644
index 00000000000..7dcb065a5f7
--- /dev/null
+++ b/include/uapi/linux/synclink.h
@@ -0,0 +1,300 @@
+/*
+ * SyncLink Multiprotocol Serial Adapter Driver
+ *
+ * $Id: synclink.h,v 3.14 2006/07/17 20:15:43 paulkf Exp $
+ *
+ * Copyright (C) 1998-2000 by Microgate Corporation
+ *
+ * Redistribution of this file is permitted under
+ * the terms of the GNU Public License (GPL)
+ */
+
+#ifndef _UAPI_SYNCLINK_H_
+#define _UAPI_SYNCLINK_H_
+#define SYNCLINK_H_VERSION 3.6
+
+#include <linux/types.h>
+
+#define BIT0	0x0001
+#define BIT1	0x0002
+#define BIT2	0x0004
+#define BIT3	0x0008
+#define BIT4	0x0010
+#define BIT5	0x0020
+#define BIT6	0x0040
+#define BIT7	0x0080
+#define BIT8	0x0100
+#define BIT9	0x0200
+#define BIT10	0x0400
+#define BIT11	0x0800
+#define BIT12	0x1000
+#define BIT13	0x2000
+#define BIT14	0x4000
+#define BIT15	0x8000
+#define BIT16	0x00010000
+#define BIT17	0x00020000
+#define BIT18	0x00040000
+#define BIT19	0x00080000
+#define BIT20	0x00100000
+#define BIT21	0x00200000
+#define BIT22	0x00400000
+#define BIT23	0x00800000
+#define BIT24	0x01000000
+#define BIT25	0x02000000
+#define BIT26	0x04000000
+#define BIT27	0x08000000
+#define BIT28	0x10000000
+#define BIT29	0x20000000
+#define BIT30	0x40000000
+#define BIT31	0x80000000
+
+
+#define HDLC_MAX_FRAME_SIZE	65535
+#define MAX_ASYNC_TRANSMIT	4096
+#define MAX_ASYNC_BUFFER_SIZE	4096
+
+#define ASYNC_PARITY_NONE		0
+#define ASYNC_PARITY_EVEN		1
+#define ASYNC_PARITY_ODD		2
+#define ASYNC_PARITY_SPACE		3
+
+#define HDLC_FLAG_UNDERRUN_ABORT7	0x0000
+#define HDLC_FLAG_UNDERRUN_ABORT15	0x0001
+#define HDLC_FLAG_UNDERRUN_FLAG		0x0002
+#define HDLC_FLAG_UNDERRUN_CRC		0x0004
+#define HDLC_FLAG_SHARE_ZERO		0x0010
+#define HDLC_FLAG_AUTO_CTS		0x0020
+#define HDLC_FLAG_AUTO_DCD		0x0040
+#define HDLC_FLAG_AUTO_RTS		0x0080
+#define HDLC_FLAG_RXC_DPLL		0x0100
+#define HDLC_FLAG_RXC_BRG		0x0200
+#define HDLC_FLAG_RXC_TXCPIN		0x8000
+#define HDLC_FLAG_RXC_RXCPIN		0x0000
+#define HDLC_FLAG_TXC_DPLL		0x0400
+#define HDLC_FLAG_TXC_BRG		0x0800
+#define HDLC_FLAG_TXC_TXCPIN		0x0000
+#define HDLC_FLAG_TXC_RXCPIN		0x0008
+#define HDLC_FLAG_DPLL_DIV8		0x1000
+#define HDLC_FLAG_DPLL_DIV16		0x2000
+#define HDLC_FLAG_DPLL_DIV32		0x0000
+#define HDLC_FLAG_HDLC_LOOPMODE		0x4000
+
+#define HDLC_CRC_NONE			0
+#define HDLC_CRC_16_CCITT		1
+#define HDLC_CRC_32_CCITT		2
+#define HDLC_CRC_MASK			0x00ff
+#define HDLC_CRC_RETURN_EX		0x8000
+
+#define RX_OK				0
+#define RX_CRC_ERROR			1
+
+#define HDLC_TXIDLE_FLAGS		0
+#define HDLC_TXIDLE_ALT_ZEROS_ONES	1
+#define HDLC_TXIDLE_ZEROS		2
+#define HDLC_TXIDLE_ONES		3
+#define HDLC_TXIDLE_ALT_MARK_SPACE	4
+#define HDLC_TXIDLE_SPACE		5
+#define HDLC_TXIDLE_MARK		6
+#define HDLC_TXIDLE_CUSTOM_8            0x10000000
+#define HDLC_TXIDLE_CUSTOM_16           0x20000000
+
+#define HDLC_ENCODING_NRZ			0
+#define HDLC_ENCODING_NRZB			1
+#define HDLC_ENCODING_NRZI_MARK			2
+#define HDLC_ENCODING_NRZI_SPACE		3
+#define HDLC_ENCODING_NRZI			HDLC_ENCODING_NRZI_SPACE
+#define HDLC_ENCODING_BIPHASE_MARK		4
+#define HDLC_ENCODING_BIPHASE_SPACE		5
+#define HDLC_ENCODING_BIPHASE_LEVEL		6
+#define HDLC_ENCODING_DIFF_BIPHASE_LEVEL	7
+
+#define HDLC_PREAMBLE_LENGTH_8BITS	0
+#define HDLC_PREAMBLE_LENGTH_16BITS	1
+#define HDLC_PREAMBLE_LENGTH_32BITS	2
+#define HDLC_PREAMBLE_LENGTH_64BITS	3
+
+#define HDLC_PREAMBLE_PATTERN_NONE	0
+#define HDLC_PREAMBLE_PATTERN_ZEROS	1
+#define HDLC_PREAMBLE_PATTERN_FLAGS	2
+#define HDLC_PREAMBLE_PATTERN_10	3
+#define HDLC_PREAMBLE_PATTERN_01	4
+#define HDLC_PREAMBLE_PATTERN_ONES	5
+
+#define MGSL_MODE_ASYNC		1
+#define MGSL_MODE_HDLC		2
+#define MGSL_MODE_MONOSYNC	3
+#define MGSL_MODE_BISYNC	4
+#define MGSL_MODE_RAW		6
+#define MGSL_MODE_BASE_CLOCK    7
+#define MGSL_MODE_XSYNC         8
+
+#define MGSL_BUS_TYPE_ISA	1
+#define MGSL_BUS_TYPE_EISA	2
+#define MGSL_BUS_TYPE_PCI	5
+
+#define MGSL_INTERFACE_MASK     0xf
+#define MGSL_INTERFACE_DISABLE  0
+#define MGSL_INTERFACE_RS232    1
+#define MGSL_INTERFACE_V35      2
+#define MGSL_INTERFACE_RS422    3
+#define MGSL_INTERFACE_RTS_EN   0x10
+#define MGSL_INTERFACE_LL       0x20
+#define MGSL_INTERFACE_RL       0x40
+#define MGSL_INTERFACE_MSB_FIRST 0x80
+
+typedef struct _MGSL_PARAMS
+{
+	/* Common */
+
+	unsigned long	mode;		/* Asynchronous or HDLC */
+	unsigned char	loopback;	/* internal loopback mode */
+
+	/* HDLC Only */
+
+	unsigned short	flags;
+	unsigned char	encoding;	/* NRZ, NRZI, etc. */
+	unsigned long	clock_speed;	/* external clock speed in bits per second */
+	unsigned char	addr_filter;	/* receive HDLC address filter, 0xFF = disable */
+	unsigned short	crc_type;	/* None, CRC16-CCITT, or CRC32-CCITT */
+	unsigned char	preamble_length;
+	unsigned char	preamble;
+
+	/* Async Only */
+
+	unsigned long	data_rate;	/* bits per second */
+	unsigned char	data_bits;	/* 7 or 8 data bits */
+	unsigned char	stop_bits;	/* 1 or 2 stop bits */
+	unsigned char	parity;		/* none, even, or odd */
+
+} MGSL_PARAMS, *PMGSL_PARAMS;
+
+#define MICROGATE_VENDOR_ID 0x13c0
+#define SYNCLINK_DEVICE_ID 0x0010
+#define MGSCC_DEVICE_ID 0x0020
+#define SYNCLINK_SCA_DEVICE_ID 0x0030
+#define SYNCLINK_GT_DEVICE_ID 0x0070
+#define SYNCLINK_GT4_DEVICE_ID 0x0080
+#define SYNCLINK_AC_DEVICE_ID  0x0090
+#define SYNCLINK_GT2_DEVICE_ID 0x00A0
+#define MGSL_MAX_SERIAL_NUMBER 30
+
+/*
+** device diagnostics status
+*/
+
+#define DiagStatus_OK				0
+#define DiagStatus_AddressFailure		1
+#define DiagStatus_AddressConflict		2
+#define DiagStatus_IrqFailure			3
+#define DiagStatus_IrqConflict			4
+#define DiagStatus_DmaFailure			5
+#define DiagStatus_DmaConflict			6
+#define DiagStatus_PciAdapterNotFound		7
+#define DiagStatus_CantAssignPciResources	8
+#define DiagStatus_CantAssignPciMemAddr		9
+#define DiagStatus_CantAssignPciIoAddr		10
+#define DiagStatus_CantAssignPciIrq		11
+#define DiagStatus_MemoryError			12
+
+#define SerialSignal_DCD            0x01     /* Data Carrier Detect */
+#define SerialSignal_TXD            0x02     /* Transmit Data */
+#define SerialSignal_RI             0x04     /* Ring Indicator */
+#define SerialSignal_RXD            0x08     /* Receive Data */
+#define SerialSignal_CTS            0x10     /* Clear to Send */
+#define SerialSignal_RTS            0x20     /* Request to Send */
+#define SerialSignal_DSR            0x40     /* Data Set Ready */
+#define SerialSignal_DTR            0x80     /* Data Terminal Ready */
+
+
+/*
+ * Counters of the input lines (CTS, DSR, RI, CD) interrupts
+ */
+struct mgsl_icount {
+	__u32	cts, dsr, rng, dcd, tx, rx;
+	__u32	frame, parity, overrun, brk;
+	__u32	buf_overrun;
+	__u32	txok;
+	__u32	txunder;
+	__u32	txabort;
+	__u32	txtimeout;
+	__u32	rxshort;
+	__u32	rxlong;
+	__u32	rxabort;
+	__u32	rxover;
+	__u32	rxcrc;
+	__u32	rxok;
+	__u32	exithunt;
+	__u32	rxidle;
+};
+
+struct gpio_desc {
+	__u32 state;
+	__u32 smask;
+	__u32 dir;
+	__u32 dmask;
+};
+
+#define DEBUG_LEVEL_DATA	1
+#define DEBUG_LEVEL_ERROR 	2
+#define DEBUG_LEVEL_INFO  	3
+#define DEBUG_LEVEL_BH    	4
+#define DEBUG_LEVEL_ISR		5
+
+/*
+** Event bit flags for use with MgslWaitEvent
+*/
+
+#define MgslEvent_DsrActive	0x0001
+#define MgslEvent_DsrInactive	0x0002
+#define MgslEvent_Dsr		0x0003
+#define MgslEvent_CtsActive	0x0004
+#define MgslEvent_CtsInactive	0x0008
+#define MgslEvent_Cts		0x000c
+#define MgslEvent_DcdActive	0x0010
+#define MgslEvent_DcdInactive	0x0020
+#define MgslEvent_Dcd		0x0030
+#define MgslEvent_RiActive	0x0040
+#define MgslEvent_RiInactive	0x0080
+#define MgslEvent_Ri		0x00c0
+#define MgslEvent_ExitHuntMode	0x0100
+#define MgslEvent_IdleReceived	0x0200
+
+/* Private IOCTL codes:
+ *
+ * MGSL_IOCSPARAMS	set MGSL_PARAMS structure values
+ * MGSL_IOCGPARAMS	get current MGSL_PARAMS structure values
+ * MGSL_IOCSTXIDLE	set current transmit idle mode
+ * MGSL_IOCGTXIDLE	get current transmit idle mode
+ * MGSL_IOCTXENABLE	enable or disable transmitter
+ * MGSL_IOCRXENABLE	enable or disable receiver
+ * MGSL_IOCTXABORT	abort transmitting frame (HDLC)
+ * MGSL_IOCGSTATS	return current statistics
+ * MGSL_IOCWAITEVENT	wait for specified event to occur
+ * MGSL_LOOPTXDONE	transmit in HDLC LoopMode done
+ * MGSL_IOCSIF          set the serial interface type
+ * MGSL_IOCGIF          get the serial interface type
+ */
+#define MGSL_MAGIC_IOC	'm'
+#define MGSL_IOCSPARAMS		_IOW(MGSL_MAGIC_IOC,0,struct _MGSL_PARAMS)
+#define MGSL_IOCGPARAMS		_IOR(MGSL_MAGIC_IOC,1,struct _MGSL_PARAMS)
+#define MGSL_IOCSTXIDLE		_IO(MGSL_MAGIC_IOC,2)
+#define MGSL_IOCGTXIDLE		_IO(MGSL_MAGIC_IOC,3)
+#define MGSL_IOCTXENABLE	_IO(MGSL_MAGIC_IOC,4)
+#define MGSL_IOCRXENABLE	_IO(MGSL_MAGIC_IOC,5)
+#define MGSL_IOCTXABORT		_IO(MGSL_MAGIC_IOC,6)
+#define MGSL_IOCGSTATS		_IO(MGSL_MAGIC_IOC,7)
+#define MGSL_IOCWAITEVENT	_IOWR(MGSL_MAGIC_IOC,8,int)
+#define MGSL_IOCCLRMODCOUNT	_IO(MGSL_MAGIC_IOC,15)
+#define MGSL_IOCLOOPTXDONE	_IO(MGSL_MAGIC_IOC,9)
+#define MGSL_IOCSIF		_IO(MGSL_MAGIC_IOC,10)
+#define MGSL_IOCGIF		_IO(MGSL_MAGIC_IOC,11)
+#define MGSL_IOCSGPIO		_IOW(MGSL_MAGIC_IOC,16,struct gpio_desc)
+#define MGSL_IOCGGPIO		_IOR(MGSL_MAGIC_IOC,17,struct gpio_desc)
+#define MGSL_IOCWAITGPIO	_IOWR(MGSL_MAGIC_IOC,18,struct gpio_desc)
+#define MGSL_IOCSXSYNC		_IO(MGSL_MAGIC_IOC, 19)
+#define MGSL_IOCGXSYNC		_IO(MGSL_MAGIC_IOC, 20)
+#define MGSL_IOCSXCTRL		_IO(MGSL_MAGIC_IOC, 21)
+#define MGSL_IOCGXCTRL		_IO(MGSL_MAGIC_IOC, 22)
+
+
+#endif /* _UAPI_SYNCLINK_H_ */
diff --git a/include/uapi/linux/sysctl.h b/include/uapi/linux/sysctl.h
new file mode 100644
index 00000000000..6d6721341f4
--- /dev/null
+++ b/include/uapi/linux/sysctl.h
@@ -0,0 +1,932 @@
+/*
+ * sysctl.h: General linux system control interface
+ *
+ * Begun 24 March 1995, Stephen Tweedie
+ *
+ ****************************************************************
+ ****************************************************************
+ **
+ **  WARNING:
+ **  The values in this file are exported to user space via 
+ **  the sysctl() binary interface.  Do *NOT* change the
+ **  numbering of any existing values here, and do not change
+ **  any numbers within any one set of values.  If you have to
+ **  redefine an existing interface, use a new number for it.
+ **  The kernel will then return -ENOTDIR to any application using
+ **  the old binary interface.
+ **
+ ****************************************************************
+ ****************************************************************
+ */
+
+#ifndef _UAPI_LINUX_SYSCTL_H
+#define _UAPI_LINUX_SYSCTL_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/compiler.h>
+
+struct completion;
+
+#define CTL_MAXNAME 10		/* how many path components do we allow in a
+				   call to sysctl?   In other words, what is
+				   the largest acceptable value for the nlen
+				   member of a struct __sysctl_args to have? */
+
+struct __sysctl_args {
+	int __user *name;
+	int nlen;
+	void __user *oldval;
+	size_t __user *oldlenp;
+	void __user *newval;
+	size_t newlen;
+	unsigned long __unused[4];
+};
+
+/* Define sysctl names first */
+
+/* Top-level names: */
+
+enum
+{
+	CTL_KERN=1,		/* General kernel info and control */
+	CTL_VM=2,		/* VM management */
+	CTL_NET=3,		/* Networking */
+	CTL_PROC=4,		/* removal breaks strace(1) compilation */
+	CTL_FS=5,		/* Filesystems */
+	CTL_DEBUG=6,		/* Debugging */
+	CTL_DEV=7,		/* Devices */
+	CTL_BUS=8,		/* Busses */
+	CTL_ABI=9,		/* Binary emulation */
+	CTL_CPU=10,		/* CPU stuff (speed scaling, etc) */
+	CTL_ARLAN=254,		/* arlan wireless driver */
+	CTL_S390DBF=5677,	/* s390 debug */
+	CTL_SUNRPC=7249,	/* sunrpc debug */
+	CTL_PM=9899,		/* frv power management */
+	CTL_FRV=9898,		/* frv specific sysctls */
+};
+
+/* CTL_BUS names: */
+enum
+{
+	CTL_BUS_ISA=1		/* ISA */
+};
+
+/* /proc/sys/fs/inotify/ */
+enum
+{
+	INOTIFY_MAX_USER_INSTANCES=1,	/* max instances per user */
+	INOTIFY_MAX_USER_WATCHES=2,	/* max watches per user */
+	INOTIFY_MAX_QUEUED_EVENTS=3	/* max queued events per instance */
+};
+
+/* CTL_KERN names: */
+enum
+{
+	KERN_OSTYPE=1,		/* string: system version */
+	KERN_OSRELEASE=2,	/* string: system release */
+	KERN_OSREV=3,		/* int: system revision */
+	KERN_VERSION=4,		/* string: compile time info */
+	KERN_SECUREMASK=5,	/* struct: maximum rights mask */
+	KERN_PROF=6,		/* table: profiling information */
+	KERN_NODENAME=7,	/* string: hostname */
+	KERN_DOMAINNAME=8,	/* string: domainname */
+
+	KERN_PANIC=15,		/* int: panic timeout */
+	KERN_REALROOTDEV=16,	/* real root device to mount after initrd */
+
+	KERN_SPARC_REBOOT=21,	/* reboot command on Sparc */
+	KERN_CTLALTDEL=22,	/* int: allow ctl-alt-del to reboot */
+	KERN_PRINTK=23,		/* struct: control printk logging parameters */
+	KERN_NAMETRANS=24,	/* Name translation */
+	KERN_PPC_HTABRECLAIM=25, /* turn htab reclaimation on/off on PPC */
+	KERN_PPC_ZEROPAGED=26,	/* turn idle page zeroing on/off on PPC */
+	KERN_PPC_POWERSAVE_NAP=27, /* use nap mode for power saving */
+	KERN_MODPROBE=28,	/* string: modprobe path */
+	KERN_SG_BIG_BUFF=29,	/* int: sg driver reserved buffer size */
+	KERN_ACCT=30,		/* BSD process accounting parameters */
+	KERN_PPC_L2CR=31,	/* l2cr register on PPC */
+
+	KERN_RTSIGNR=32,	/* Number of rt sigs queued */
+	KERN_RTSIGMAX=33,	/* Max queuable */
+	
+	KERN_SHMMAX=34,         /* long: Maximum shared memory segment */
+	KERN_MSGMAX=35,         /* int: Maximum size of a messege */
+	KERN_MSGMNB=36,         /* int: Maximum message queue size */
+	KERN_MSGPOOL=37,        /* int: Maximum system message pool size */
+	KERN_SYSRQ=38,		/* int: Sysreq enable */
+	KERN_MAX_THREADS=39,	/* int: Maximum nr of threads in the system */
+ 	KERN_RANDOM=40,		/* Random driver */
+ 	KERN_SHMALL=41,		/* int: Maximum size of shared memory */
+ 	KERN_MSGMNI=42,		/* int: msg queue identifiers */
+ 	KERN_SEM=43,		/* struct: sysv semaphore limits */
+ 	KERN_SPARC_STOP_A=44,	/* int: Sparc Stop-A enable */
+ 	KERN_SHMMNI=45,		/* int: shm array identifiers */
+	KERN_OVERFLOWUID=46,	/* int: overflow UID */
+	KERN_OVERFLOWGID=47,	/* int: overflow GID */
+	KERN_SHMPATH=48,	/* string: path to shm fs */
+	KERN_HOTPLUG=49,	/* string: path to uevent helper (deprecated) */
+	KERN_IEEE_EMULATION_WARNINGS=50, /* int: unimplemented ieee instructions */
+	KERN_S390_USER_DEBUG_LOGGING=51,  /* int: dumps of user faults */
+	KERN_CORE_USES_PID=52,		/* int: use core or core.%pid */
+	KERN_TAINTED=53,	/* int: various kernel tainted flags */
+	KERN_CADPID=54,		/* int: PID of the process to notify on CAD */
+	KERN_PIDMAX=55,		/* int: PID # limit */
+  	KERN_CORE_PATTERN=56,	/* string: pattern for core-file names */
+	KERN_PANIC_ON_OOPS=57,  /* int: whether we will panic on an oops */
+	KERN_HPPA_PWRSW=58,	/* int: hppa soft-power enable */
+	KERN_HPPA_UNALIGNED=59,	/* int: hppa unaligned-trap enable */
+	KERN_PRINTK_RATELIMIT=60, /* int: tune printk ratelimiting */
+	KERN_PRINTK_RATELIMIT_BURST=61,	/* int: tune printk ratelimiting */
+	KERN_PTY=62,		/* dir: pty driver */
+	KERN_NGROUPS_MAX=63,	/* int: NGROUPS_MAX */
+	KERN_SPARC_SCONS_PWROFF=64, /* int: serial console power-off halt */
+	KERN_HZ_TIMER=65,	/* int: hz timer on or off */
+	KERN_UNKNOWN_NMI_PANIC=66, /* int: unknown nmi panic flag */
+	KERN_BOOTLOADER_TYPE=67, /* int: boot loader type */
+	KERN_RANDOMIZE=68, /* int: randomize virtual address space */
+	KERN_SETUID_DUMPABLE=69, /* int: behaviour of dumps for setuid core */
+	KERN_SPIN_RETRY=70,	/* int: number of spinlock retries */
+	KERN_ACPI_VIDEO_FLAGS=71, /* int: flags for setting up video after ACPI sleep */
+	KERN_IA64_UNALIGNED=72, /* int: ia64 unaligned userland trap enable */
+	KERN_COMPAT_LOG=73,	/* int: print compat layer  messages */
+	KERN_MAX_LOCK_DEPTH=74, /* int: rtmutex's maximum lock depth */
+	KERN_NMI_WATCHDOG=75, /* int: enable/disable nmi watchdog */
+	KERN_PANIC_ON_NMI=76, /* int: whether we will panic on an unrecovered */
+};
+
+
+
+/* CTL_VM names: */
+enum
+{
+	VM_UNUSED1=1,		/* was: struct: Set vm swapping control */
+	VM_UNUSED2=2,		/* was; int: Linear or sqrt() swapout for hogs */
+	VM_UNUSED3=3,		/* was: struct: Set free page thresholds */
+	VM_UNUSED4=4,		/* Spare */
+	VM_OVERCOMMIT_MEMORY=5,	/* Turn off the virtual memory safety limit */
+	VM_UNUSED5=6,		/* was: struct: Set buffer memory thresholds */
+	VM_UNUSED7=7,		/* was: struct: Set cache memory thresholds */
+	VM_UNUSED8=8,		/* was: struct: Control kswapd behaviour */
+	VM_UNUSED9=9,		/* was: struct: Set page table cache parameters */
+	VM_PAGE_CLUSTER=10,	/* int: set number of pages to swap together */
+	VM_DIRTY_BACKGROUND=11,	/* dirty_background_ratio */
+	VM_DIRTY_RATIO=12,	/* dirty_ratio */
+	VM_DIRTY_WB_CS=13,	/* dirty_writeback_centisecs */
+	VM_DIRTY_EXPIRE_CS=14,	/* dirty_expire_centisecs */
+	VM_NR_PDFLUSH_THREADS=15, /* nr_pdflush_threads */
+	VM_OVERCOMMIT_RATIO=16, /* percent of RAM to allow overcommit in */
+	VM_PAGEBUF=17,		/* struct: Control pagebuf parameters */
+	VM_HUGETLB_PAGES=18,	/* int: Number of available Huge Pages */
+	VM_SWAPPINESS=19,	/* Tendency to steal mapped memory */
+	VM_LOWMEM_RESERVE_RATIO=20,/* reservation ratio for lower memory zones */
+	VM_MIN_FREE_KBYTES=21,	/* Minimum free kilobytes to maintain */
+	VM_MAX_MAP_COUNT=22,	/* int: Maximum number of mmaps/address-space */
+	VM_LAPTOP_MODE=23,	/* vm laptop mode */
+	VM_BLOCK_DUMP=24,	/* block dump mode */
+	VM_HUGETLB_GROUP=25,	/* permitted hugetlb group */
+	VM_VFS_CACHE_PRESSURE=26, /* dcache/icache reclaim pressure */
+	VM_LEGACY_VA_LAYOUT=27, /* legacy/compatibility virtual address space layout */
+	VM_SWAP_TOKEN_TIMEOUT=28, /* default time for token time out */
+	VM_DROP_PAGECACHE=29,	/* int: nuke lots of pagecache */
+	VM_PERCPU_PAGELIST_FRACTION=30,/* int: fraction of pages in each percpu_pagelist */
+	VM_ZONE_RECLAIM_MODE=31, /* reclaim local zone memory before going off node */
+	VM_MIN_UNMAPPED=32,	/* Set min percent of unmapped pages */
+	VM_PANIC_ON_OOM=33,	/* panic at out-of-memory */
+	VM_VDSO_ENABLED=34,	/* map VDSO into new processes? */
+	VM_MIN_SLAB=35,		 /* Percent pages ignored by zone reclaim */
+};
+
+
+/* CTL_NET names: */
+enum
+{
+	NET_CORE=1,
+	NET_ETHER=2,
+	NET_802=3,
+	NET_UNIX=4,
+	NET_IPV4=5,
+	NET_IPX=6,
+	NET_ATALK=7,
+	NET_NETROM=8,
+	NET_AX25=9,
+	NET_BRIDGE=10,
+	NET_ROSE=11,
+	NET_IPV6=12,
+	NET_X25=13,
+	NET_TR=14,
+	NET_DECNET=15,
+	NET_ECONET=16,
+	NET_SCTP=17,
+	NET_LLC=18,
+	NET_NETFILTER=19,
+	NET_DCCP=20,
+	NET_IRDA=412,
+};
+
+/* /proc/sys/kernel/random */
+enum
+{
+	RANDOM_POOLSIZE=1,
+	RANDOM_ENTROPY_COUNT=2,
+	RANDOM_READ_THRESH=3,
+	RANDOM_WRITE_THRESH=4,
+	RANDOM_BOOT_ID=5,
+	RANDOM_UUID=6
+};
+
+/* /proc/sys/kernel/pty */
+enum
+{
+	PTY_MAX=1,
+	PTY_NR=2
+};
+
+/* /proc/sys/bus/isa */
+enum
+{
+	BUS_ISA_MEM_BASE=1,
+	BUS_ISA_PORT_BASE=2,
+	BUS_ISA_PORT_SHIFT=3
+};
+
+/* /proc/sys/net/core */
+enum
+{
+	NET_CORE_WMEM_MAX=1,
+	NET_CORE_RMEM_MAX=2,
+	NET_CORE_WMEM_DEFAULT=3,
+	NET_CORE_RMEM_DEFAULT=4,
+/* was	NET_CORE_DESTROY_DELAY */
+	NET_CORE_MAX_BACKLOG=6,
+	NET_CORE_FASTROUTE=7,
+	NET_CORE_MSG_COST=8,
+	NET_CORE_MSG_BURST=9,
+	NET_CORE_OPTMEM_MAX=10,
+	NET_CORE_HOT_LIST_LENGTH=11,
+	NET_CORE_DIVERT_VERSION=12,
+	NET_CORE_NO_CONG_THRESH=13,
+	NET_CORE_NO_CONG=14,
+	NET_CORE_LO_CONG=15,
+	NET_CORE_MOD_CONG=16,
+	NET_CORE_DEV_WEIGHT=17,
+	NET_CORE_SOMAXCONN=18,
+	NET_CORE_BUDGET=19,
+	NET_CORE_AEVENT_ETIME=20,
+	NET_CORE_AEVENT_RSEQTH=21,
+	NET_CORE_WARNINGS=22,
+};
+
+/* /proc/sys/net/ethernet */
+
+/* /proc/sys/net/802 */
+
+/* /proc/sys/net/unix */
+
+enum
+{
+	NET_UNIX_DESTROY_DELAY=1,
+	NET_UNIX_DELETE_DELAY=2,
+	NET_UNIX_MAX_DGRAM_QLEN=3,
+};
+
+/* /proc/sys/net/netfilter */
+enum
+{
+	NET_NF_CONNTRACK_MAX=1,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT=2,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_SYN_RECV=3,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_ESTABLISHED=4,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_FIN_WAIT=5,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_CLOSE_WAIT=6,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_LAST_ACK=7,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_TIME_WAIT=8,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_CLOSE=9,
+	NET_NF_CONNTRACK_UDP_TIMEOUT=10,
+	NET_NF_CONNTRACK_UDP_TIMEOUT_STREAM=11,
+	NET_NF_CONNTRACK_ICMP_TIMEOUT=12,
+	NET_NF_CONNTRACK_GENERIC_TIMEOUT=13,
+	NET_NF_CONNTRACK_BUCKETS=14,
+	NET_NF_CONNTRACK_LOG_INVALID=15,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_MAX_RETRANS=16,
+	NET_NF_CONNTRACK_TCP_LOOSE=17,
+	NET_NF_CONNTRACK_TCP_BE_LIBERAL=18,
+	NET_NF_CONNTRACK_TCP_MAX_RETRANS=19,
+	NET_NF_CONNTRACK_SCTP_TIMEOUT_CLOSED=20,
+	NET_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_WAIT=21,
+	NET_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_ECHOED=22,
+	NET_NF_CONNTRACK_SCTP_TIMEOUT_ESTABLISHED=23,
+	NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_SENT=24,
+	NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_RECD=25,
+	NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_ACK_SENT=26,
+	NET_NF_CONNTRACK_COUNT=27,
+	NET_NF_CONNTRACK_ICMPV6_TIMEOUT=28,
+	NET_NF_CONNTRACK_FRAG6_TIMEOUT=29,
+	NET_NF_CONNTRACK_FRAG6_LOW_THRESH=30,
+	NET_NF_CONNTRACK_FRAG6_HIGH_THRESH=31,
+	NET_NF_CONNTRACK_CHECKSUM=32,
+};
+
+/* /proc/sys/net/ipv4 */
+enum
+{
+	/* v2.0 compatibile variables */
+	NET_IPV4_FORWARD=8,
+	NET_IPV4_DYNADDR=9,
+
+	NET_IPV4_CONF=16,
+	NET_IPV4_NEIGH=17,
+	NET_IPV4_ROUTE=18,
+	NET_IPV4_FIB_HASH=19,
+	NET_IPV4_NETFILTER=20,
+
+	NET_IPV4_TCP_TIMESTAMPS=33,
+	NET_IPV4_TCP_WINDOW_SCALING=34,
+	NET_IPV4_TCP_SACK=35,
+	NET_IPV4_TCP_RETRANS_COLLAPSE=36,
+	NET_IPV4_DEFAULT_TTL=37,
+	NET_IPV4_AUTOCONFIG=38,
+	NET_IPV4_NO_PMTU_DISC=39,
+	NET_IPV4_TCP_SYN_RETRIES=40,
+	NET_IPV4_IPFRAG_HIGH_THRESH=41,
+	NET_IPV4_IPFRAG_LOW_THRESH=42,
+	NET_IPV4_IPFRAG_TIME=43,
+	NET_IPV4_TCP_MAX_KA_PROBES=44,
+	NET_IPV4_TCP_KEEPALIVE_TIME=45,
+	NET_IPV4_TCP_KEEPALIVE_PROBES=46,
+	NET_IPV4_TCP_RETRIES1=47,
+	NET_IPV4_TCP_RETRIES2=48,
+	NET_IPV4_TCP_FIN_TIMEOUT=49,
+	NET_IPV4_IP_MASQ_DEBUG=50,
+	NET_TCP_SYNCOOKIES=51,
+	NET_TCP_STDURG=52,
+	NET_TCP_RFC1337=53,
+	NET_TCP_SYN_TAILDROP=54,
+	NET_TCP_MAX_SYN_BACKLOG=55,
+	NET_IPV4_LOCAL_PORT_RANGE=56,
+	NET_IPV4_ICMP_ECHO_IGNORE_ALL=57,
+	NET_IPV4_ICMP_ECHO_IGNORE_BROADCASTS=58,
+	NET_IPV4_ICMP_SOURCEQUENCH_RATE=59,
+	NET_IPV4_ICMP_DESTUNREACH_RATE=60,
+	NET_IPV4_ICMP_TIMEEXCEED_RATE=61,
+	NET_IPV4_ICMP_PARAMPROB_RATE=62,
+	NET_IPV4_ICMP_ECHOREPLY_RATE=63,
+	NET_IPV4_ICMP_IGNORE_BOGUS_ERROR_RESPONSES=64,
+	NET_IPV4_IGMP_MAX_MEMBERSHIPS=65,
+	NET_TCP_TW_RECYCLE=66,
+	NET_IPV4_ALWAYS_DEFRAG=67,
+	NET_IPV4_TCP_KEEPALIVE_INTVL=68,
+	NET_IPV4_INET_PEER_THRESHOLD=69,
+	NET_IPV4_INET_PEER_MINTTL=70,
+	NET_IPV4_INET_PEER_MAXTTL=71,
+	NET_IPV4_INET_PEER_GC_MINTIME=72,
+	NET_IPV4_INET_PEER_GC_MAXTIME=73,
+	NET_TCP_ORPHAN_RETRIES=74,
+	NET_TCP_ABORT_ON_OVERFLOW=75,
+	NET_TCP_SYNACK_RETRIES=76,
+	NET_TCP_MAX_ORPHANS=77,
+	NET_TCP_MAX_TW_BUCKETS=78,
+	NET_TCP_FACK=79,
+	NET_TCP_REORDERING=80,
+	NET_TCP_ECN=81,
+	NET_TCP_DSACK=82,
+	NET_TCP_MEM=83,
+	NET_TCP_WMEM=84,
+	NET_TCP_RMEM=85,
+	NET_TCP_APP_WIN=86,
+	NET_TCP_ADV_WIN_SCALE=87,
+	NET_IPV4_NONLOCAL_BIND=88,
+	NET_IPV4_ICMP_RATELIMIT=89,
+	NET_IPV4_ICMP_RATEMASK=90,
+	NET_TCP_TW_REUSE=91,
+	NET_TCP_FRTO=92,
+	NET_TCP_LOW_LATENCY=93,
+	NET_IPV4_IPFRAG_SECRET_INTERVAL=94,
+	NET_IPV4_IGMP_MAX_MSF=96,
+	NET_TCP_NO_METRICS_SAVE=97,
+	NET_TCP_DEFAULT_WIN_SCALE=105,
+	NET_TCP_MODERATE_RCVBUF=106,
+	NET_TCP_TSO_WIN_DIVISOR=107,
+	NET_TCP_BIC_BETA=108,
+	NET_IPV4_ICMP_ERRORS_USE_INBOUND_IFADDR=109,
+	NET_TCP_CONG_CONTROL=110,
+	NET_TCP_ABC=111,
+	NET_IPV4_IPFRAG_MAX_DIST=112,
+ 	NET_TCP_MTU_PROBING=113,
+	NET_TCP_BASE_MSS=114,
+	NET_IPV4_TCP_WORKAROUND_SIGNED_WINDOWS=115,
+	NET_TCP_DMA_COPYBREAK=116,
+	NET_TCP_SLOW_START_AFTER_IDLE=117,
+	NET_CIPSOV4_CACHE_ENABLE=118,
+	NET_CIPSOV4_CACHE_BUCKET_SIZE=119,
+	NET_CIPSOV4_RBM_OPTFMT=120,
+	NET_CIPSOV4_RBM_STRICTVALID=121,
+	NET_TCP_AVAIL_CONG_CONTROL=122,
+	NET_TCP_ALLOWED_CONG_CONTROL=123,
+	NET_TCP_MAX_SSTHRESH=124,
+	NET_TCP_FRTO_RESPONSE=125,
+};
+
+enum {
+	NET_IPV4_ROUTE_FLUSH=1,
+	NET_IPV4_ROUTE_MIN_DELAY=2, /* obsolete since 2.6.25 */
+	NET_IPV4_ROUTE_MAX_DELAY=3, /* obsolete since 2.6.25 */
+	NET_IPV4_ROUTE_GC_THRESH=4,
+	NET_IPV4_ROUTE_MAX_SIZE=5,
+	NET_IPV4_ROUTE_GC_MIN_INTERVAL=6,
+	NET_IPV4_ROUTE_GC_TIMEOUT=7,
+	NET_IPV4_ROUTE_GC_INTERVAL=8, /* obsolete since 2.6.38 */
+	NET_IPV4_ROUTE_REDIRECT_LOAD=9,
+	NET_IPV4_ROUTE_REDIRECT_NUMBER=10,
+	NET_IPV4_ROUTE_REDIRECT_SILENCE=11,
+	NET_IPV4_ROUTE_ERROR_COST=12,
+	NET_IPV4_ROUTE_ERROR_BURST=13,
+	NET_IPV4_ROUTE_GC_ELASTICITY=14,
+	NET_IPV4_ROUTE_MTU_EXPIRES=15,
+	NET_IPV4_ROUTE_MIN_PMTU=16,
+	NET_IPV4_ROUTE_MIN_ADVMSS=17,
+	NET_IPV4_ROUTE_SECRET_INTERVAL=18,
+	NET_IPV4_ROUTE_GC_MIN_INTERVAL_MS=19,
+};
+
+enum
+{
+	NET_PROTO_CONF_ALL=-2,
+	NET_PROTO_CONF_DEFAULT=-3
+
+	/* And device ifindices ... */
+};
+
+enum
+{
+	NET_IPV4_CONF_FORWARDING=1,
+	NET_IPV4_CONF_MC_FORWARDING=2,
+	NET_IPV4_CONF_PROXY_ARP=3,
+	NET_IPV4_CONF_ACCEPT_REDIRECTS=4,
+	NET_IPV4_CONF_SECURE_REDIRECTS=5,
+	NET_IPV4_CONF_SEND_REDIRECTS=6,
+	NET_IPV4_CONF_SHARED_MEDIA=7,
+	NET_IPV4_CONF_RP_FILTER=8,
+	NET_IPV4_CONF_ACCEPT_SOURCE_ROUTE=9,
+	NET_IPV4_CONF_BOOTP_RELAY=10,
+	NET_IPV4_CONF_LOG_MARTIANS=11,
+	NET_IPV4_CONF_TAG=12,
+	NET_IPV4_CONF_ARPFILTER=13,
+	NET_IPV4_CONF_MEDIUM_ID=14,
+	NET_IPV4_CONF_NOXFRM=15,
+	NET_IPV4_CONF_NOPOLICY=16,
+	NET_IPV4_CONF_FORCE_IGMP_VERSION=17,
+	NET_IPV4_CONF_ARP_ANNOUNCE=18,
+	NET_IPV4_CONF_ARP_IGNORE=19,
+	NET_IPV4_CONF_PROMOTE_SECONDARIES=20,
+	NET_IPV4_CONF_ARP_ACCEPT=21,
+	NET_IPV4_CONF_ARP_NOTIFY=22,
+};
+
+/* /proc/sys/net/ipv4/netfilter */
+enum
+{
+	NET_IPV4_NF_CONNTRACK_MAX=1,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT=2,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_RECV=3,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_ESTABLISHED=4,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_FIN_WAIT=5,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_CLOSE_WAIT=6,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_LAST_ACK=7,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_TIME_WAIT=8,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_CLOSE=9,
+	NET_IPV4_NF_CONNTRACK_UDP_TIMEOUT=10,
+	NET_IPV4_NF_CONNTRACK_UDP_TIMEOUT_STREAM=11,
+	NET_IPV4_NF_CONNTRACK_ICMP_TIMEOUT=12,
+	NET_IPV4_NF_CONNTRACK_GENERIC_TIMEOUT=13,
+	NET_IPV4_NF_CONNTRACK_BUCKETS=14,
+	NET_IPV4_NF_CONNTRACK_LOG_INVALID=15,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_MAX_RETRANS=16,
+	NET_IPV4_NF_CONNTRACK_TCP_LOOSE=17,
+	NET_IPV4_NF_CONNTRACK_TCP_BE_LIBERAL=18,
+	NET_IPV4_NF_CONNTRACK_TCP_MAX_RETRANS=19,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_CLOSED=20,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_WAIT=21,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_ECHOED=22,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_ESTABLISHED=23,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_SENT=24,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_RECD=25,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_ACK_SENT=26,
+	NET_IPV4_NF_CONNTRACK_COUNT=27,
+	NET_IPV4_NF_CONNTRACK_CHECKSUM=28,
+};
+ 
+/* /proc/sys/net/ipv6 */
+enum {
+	NET_IPV6_CONF=16,
+	NET_IPV6_NEIGH=17,
+	NET_IPV6_ROUTE=18,
+	NET_IPV6_ICMP=19,
+	NET_IPV6_BINDV6ONLY=20,
+	NET_IPV6_IP6FRAG_HIGH_THRESH=21,
+	NET_IPV6_IP6FRAG_LOW_THRESH=22,
+	NET_IPV6_IP6FRAG_TIME=23,
+	NET_IPV6_IP6FRAG_SECRET_INTERVAL=24,
+	NET_IPV6_MLD_MAX_MSF=25,
+};
+
+enum {
+	NET_IPV6_ROUTE_FLUSH=1,
+	NET_IPV6_ROUTE_GC_THRESH=2,
+	NET_IPV6_ROUTE_MAX_SIZE=3,
+	NET_IPV6_ROUTE_GC_MIN_INTERVAL=4,
+	NET_IPV6_ROUTE_GC_TIMEOUT=5,
+	NET_IPV6_ROUTE_GC_INTERVAL=6,
+	NET_IPV6_ROUTE_GC_ELASTICITY=7,
+	NET_IPV6_ROUTE_MTU_EXPIRES=8,
+	NET_IPV6_ROUTE_MIN_ADVMSS=9,
+	NET_IPV6_ROUTE_GC_MIN_INTERVAL_MS=10
+};
+
+enum {
+	NET_IPV6_FORWARDING=1,
+	NET_IPV6_HOP_LIMIT=2,
+	NET_IPV6_MTU=3,
+	NET_IPV6_ACCEPT_RA=4,
+	NET_IPV6_ACCEPT_REDIRECTS=5,
+	NET_IPV6_AUTOCONF=6,
+	NET_IPV6_DAD_TRANSMITS=7,
+	NET_IPV6_RTR_SOLICITS=8,
+	NET_IPV6_RTR_SOLICIT_INTERVAL=9,
+	NET_IPV6_RTR_SOLICIT_DELAY=10,
+	NET_IPV6_USE_TEMPADDR=11,
+	NET_IPV6_TEMP_VALID_LFT=12,
+	NET_IPV6_TEMP_PREFERED_LFT=13,
+	NET_IPV6_REGEN_MAX_RETRY=14,
+	NET_IPV6_MAX_DESYNC_FACTOR=15,
+	NET_IPV6_MAX_ADDRESSES=16,
+	NET_IPV6_FORCE_MLD_VERSION=17,
+	NET_IPV6_ACCEPT_RA_DEFRTR=18,
+	NET_IPV6_ACCEPT_RA_PINFO=19,
+	NET_IPV6_ACCEPT_RA_RTR_PREF=20,
+	NET_IPV6_RTR_PROBE_INTERVAL=21,
+	NET_IPV6_ACCEPT_RA_RT_INFO_MAX_PLEN=22,
+	NET_IPV6_PROXY_NDP=23,
+	NET_IPV6_ACCEPT_SOURCE_ROUTE=25,
+	__NET_IPV6_MAX
+};
+
+/* /proc/sys/net/ipv6/icmp */
+enum {
+	NET_IPV6_ICMP_RATELIMIT=1
+};
+
+/* /proc/sys/net/<protocol>/neigh/<dev> */
+enum {
+	NET_NEIGH_MCAST_SOLICIT=1,
+	NET_NEIGH_UCAST_SOLICIT=2,
+	NET_NEIGH_APP_SOLICIT=3,
+	NET_NEIGH_RETRANS_TIME=4,
+	NET_NEIGH_REACHABLE_TIME=5,
+	NET_NEIGH_DELAY_PROBE_TIME=6,
+	NET_NEIGH_GC_STALE_TIME=7,
+	NET_NEIGH_UNRES_QLEN=8,
+	NET_NEIGH_PROXY_QLEN=9,
+	NET_NEIGH_ANYCAST_DELAY=10,
+	NET_NEIGH_PROXY_DELAY=11,
+	NET_NEIGH_LOCKTIME=12,
+	NET_NEIGH_GC_INTERVAL=13,
+	NET_NEIGH_GC_THRESH1=14,
+	NET_NEIGH_GC_THRESH2=15,
+	NET_NEIGH_GC_THRESH3=16,
+	NET_NEIGH_RETRANS_TIME_MS=17,
+	NET_NEIGH_REACHABLE_TIME_MS=18,
+};
+
+/* /proc/sys/net/dccp */
+enum {
+	NET_DCCP_DEFAULT=1,
+};
+
+/* /proc/sys/net/ipx */
+enum {
+	NET_IPX_PPROP_BROADCASTING=1,
+	NET_IPX_FORWARDING=2
+};
+
+/* /proc/sys/net/llc */
+enum {
+	NET_LLC2=1,
+	NET_LLC_STATION=2,
+};
+
+/* /proc/sys/net/llc/llc2 */
+enum {
+	NET_LLC2_TIMEOUT=1,
+};
+
+/* /proc/sys/net/llc/station */
+enum {
+	NET_LLC_STATION_ACK_TIMEOUT=1,
+};
+
+/* /proc/sys/net/llc/llc2/timeout */
+enum {
+	NET_LLC2_ACK_TIMEOUT=1,
+	NET_LLC2_P_TIMEOUT=2,
+	NET_LLC2_REJ_TIMEOUT=3,
+	NET_LLC2_BUSY_TIMEOUT=4,
+};
+
+/* /proc/sys/net/appletalk */
+enum {
+	NET_ATALK_AARP_EXPIRY_TIME=1,
+	NET_ATALK_AARP_TICK_TIME=2,
+	NET_ATALK_AARP_RETRANSMIT_LIMIT=3,
+	NET_ATALK_AARP_RESOLVE_TIME=4
+};
+
+
+/* /proc/sys/net/netrom */
+enum {
+	NET_NETROM_DEFAULT_PATH_QUALITY=1,
+	NET_NETROM_OBSOLESCENCE_COUNT_INITIALISER=2,
+	NET_NETROM_NETWORK_TTL_INITIALISER=3,
+	NET_NETROM_TRANSPORT_TIMEOUT=4,
+	NET_NETROM_TRANSPORT_MAXIMUM_TRIES=5,
+	NET_NETROM_TRANSPORT_ACKNOWLEDGE_DELAY=6,
+	NET_NETROM_TRANSPORT_BUSY_DELAY=7,
+	NET_NETROM_TRANSPORT_REQUESTED_WINDOW_SIZE=8,
+	NET_NETROM_TRANSPORT_NO_ACTIVITY_TIMEOUT=9,
+	NET_NETROM_ROUTING_CONTROL=10,
+	NET_NETROM_LINK_FAILS_COUNT=11,
+	NET_NETROM_RESET=12
+};
+
+/* /proc/sys/net/ax25 */
+enum {
+	NET_AX25_IP_DEFAULT_MODE=1,
+	NET_AX25_DEFAULT_MODE=2,
+	NET_AX25_BACKOFF_TYPE=3,
+	NET_AX25_CONNECT_MODE=4,
+	NET_AX25_STANDARD_WINDOW=5,
+	NET_AX25_EXTENDED_WINDOW=6,
+	NET_AX25_T1_TIMEOUT=7,
+	NET_AX25_T2_TIMEOUT=8,
+	NET_AX25_T3_TIMEOUT=9,
+	NET_AX25_IDLE_TIMEOUT=10,
+	NET_AX25_N2=11,
+	NET_AX25_PACLEN=12,
+	NET_AX25_PROTOCOL=13,
+	NET_AX25_DAMA_SLAVE_TIMEOUT=14
+};
+
+/* /proc/sys/net/rose */
+enum {
+	NET_ROSE_RESTART_REQUEST_TIMEOUT=1,
+	NET_ROSE_CALL_REQUEST_TIMEOUT=2,
+	NET_ROSE_RESET_REQUEST_TIMEOUT=3,
+	NET_ROSE_CLEAR_REQUEST_TIMEOUT=4,
+	NET_ROSE_ACK_HOLD_BACK_TIMEOUT=5,
+	NET_ROSE_ROUTING_CONTROL=6,
+	NET_ROSE_LINK_FAIL_TIMEOUT=7,
+	NET_ROSE_MAX_VCS=8,
+	NET_ROSE_WINDOW_SIZE=9,
+	NET_ROSE_NO_ACTIVITY_TIMEOUT=10
+};
+
+/* /proc/sys/net/x25 */
+enum {
+	NET_X25_RESTART_REQUEST_TIMEOUT=1,
+	NET_X25_CALL_REQUEST_TIMEOUT=2,
+	NET_X25_RESET_REQUEST_TIMEOUT=3,
+	NET_X25_CLEAR_REQUEST_TIMEOUT=4,
+	NET_X25_ACK_HOLD_BACK_TIMEOUT=5,
+	NET_X25_FORWARD=6
+};
+
+/* /proc/sys/net/token-ring */
+enum
+{
+	NET_TR_RIF_TIMEOUT=1
+};
+
+/* /proc/sys/net/decnet/ */
+enum {
+	NET_DECNET_NODE_TYPE = 1,
+	NET_DECNET_NODE_ADDRESS = 2,
+	NET_DECNET_NODE_NAME = 3,
+	NET_DECNET_DEFAULT_DEVICE = 4,
+	NET_DECNET_TIME_WAIT = 5,
+	NET_DECNET_DN_COUNT = 6,
+	NET_DECNET_DI_COUNT = 7,
+	NET_DECNET_DR_COUNT = 8,
+	NET_DECNET_DST_GC_INTERVAL = 9,
+	NET_DECNET_CONF = 10,
+	NET_DECNET_NO_FC_MAX_CWND = 11,
+	NET_DECNET_MEM = 12,
+	NET_DECNET_RMEM = 13,
+	NET_DECNET_WMEM = 14,
+	NET_DECNET_DEBUG_LEVEL = 255
+};
+
+/* /proc/sys/net/decnet/conf/<dev> */
+enum {
+	NET_DECNET_CONF_LOOPBACK = -2,
+	NET_DECNET_CONF_DDCMP = -3,
+	NET_DECNET_CONF_PPP = -4,
+	NET_DECNET_CONF_X25 = -5,
+	NET_DECNET_CONF_GRE = -6,
+	NET_DECNET_CONF_ETHER = -7
+
+	/* ... and ifindex of devices */
+};
+
+/* /proc/sys/net/decnet/conf/<dev>/ */
+enum {
+	NET_DECNET_CONF_DEV_PRIORITY = 1,
+	NET_DECNET_CONF_DEV_T1 = 2,
+	NET_DECNET_CONF_DEV_T2 = 3,
+	NET_DECNET_CONF_DEV_T3 = 4,
+	NET_DECNET_CONF_DEV_FORWARDING = 5,
+	NET_DECNET_CONF_DEV_BLKSIZE = 6,
+	NET_DECNET_CONF_DEV_STATE = 7
+};
+
+/* /proc/sys/net/sctp */
+enum {
+	NET_SCTP_RTO_INITIAL = 1,
+	NET_SCTP_RTO_MIN     = 2,
+	NET_SCTP_RTO_MAX     = 3,
+	NET_SCTP_RTO_ALPHA   = 4,
+	NET_SCTP_RTO_BETA    = 5,
+	NET_SCTP_VALID_COOKIE_LIFE       =  6,
+	NET_SCTP_ASSOCIATION_MAX_RETRANS =  7,
+	NET_SCTP_PATH_MAX_RETRANS        =  8,
+	NET_SCTP_MAX_INIT_RETRANSMITS    =  9,
+	NET_SCTP_HB_INTERVAL             = 10,
+	NET_SCTP_PRESERVE_ENABLE         = 11,
+	NET_SCTP_MAX_BURST               = 12,
+	NET_SCTP_ADDIP_ENABLE		 = 13,
+	NET_SCTP_PRSCTP_ENABLE		 = 14,
+	NET_SCTP_SNDBUF_POLICY		 = 15,
+	NET_SCTP_SACK_TIMEOUT		 = 16,
+	NET_SCTP_RCVBUF_POLICY		 = 17,
+};
+
+/* /proc/sys/net/bridge */
+enum {
+	NET_BRIDGE_NF_CALL_ARPTABLES = 1,
+	NET_BRIDGE_NF_CALL_IPTABLES = 2,
+	NET_BRIDGE_NF_CALL_IP6TABLES = 3,
+	NET_BRIDGE_NF_FILTER_VLAN_TAGGED = 4,
+	NET_BRIDGE_NF_FILTER_PPPOE_TAGGED = 5,
+};
+
+/* proc/sys/net/irda */
+enum {
+	NET_IRDA_DISCOVERY=1,
+	NET_IRDA_DEVNAME=2,
+	NET_IRDA_DEBUG=3,
+	NET_IRDA_FAST_POLL=4,
+	NET_IRDA_DISCOVERY_SLOTS=5,
+	NET_IRDA_DISCOVERY_TIMEOUT=6,
+	NET_IRDA_SLOT_TIMEOUT=7,
+	NET_IRDA_MAX_BAUD_RATE=8,
+	NET_IRDA_MIN_TX_TURN_TIME=9,
+	NET_IRDA_MAX_TX_DATA_SIZE=10,
+	NET_IRDA_MAX_TX_WINDOW=11,
+	NET_IRDA_MAX_NOREPLY_TIME=12,
+	NET_IRDA_WARN_NOREPLY_TIME=13,
+	NET_IRDA_LAP_KEEPALIVE_TIME=14,
+};
+
+
+/* CTL_FS names: */
+enum
+{
+	FS_NRINODE=1,	/* int:current number of allocated inodes */
+	FS_STATINODE=2,
+	FS_MAXINODE=3,	/* int:maximum number of inodes that can be allocated */
+	FS_NRDQUOT=4,	/* int:current number of allocated dquots */
+	FS_MAXDQUOT=5,	/* int:maximum number of dquots that can be allocated */
+	FS_NRFILE=6,	/* int:current number of allocated filedescriptors */
+	FS_MAXFILE=7,	/* int:maximum number of filedescriptors that can be allocated */
+	FS_DENTRY=8,
+	FS_NRSUPER=9,	/* int:current number of allocated super_blocks */
+	FS_MAXSUPER=10,	/* int:maximum number of super_blocks that can be allocated */
+	FS_OVERFLOWUID=11,	/* int: overflow UID */
+	FS_OVERFLOWGID=12,	/* int: overflow GID */
+	FS_LEASES=13,	/* int: leases enabled */
+	FS_DIR_NOTIFY=14,	/* int: directory notification enabled */
+	FS_LEASE_TIME=15,	/* int: maximum time to wait for a lease break */
+	FS_DQSTATS=16,	/* disc quota usage statistics and control */
+	FS_XFS=17,	/* struct: control xfs parameters */
+	FS_AIO_NR=18,	/* current system-wide number of aio requests */
+	FS_AIO_MAX_NR=19,	/* system-wide maximum number of aio requests */
+	FS_INOTIFY=20,	/* inotify submenu */
+	FS_OCFS2=988,	/* ocfs2 */
+};
+
+/* /proc/sys/fs/quota/ */
+enum {
+	FS_DQ_LOOKUPS = 1,
+	FS_DQ_DROPS = 2,
+	FS_DQ_READS = 3,
+	FS_DQ_WRITES = 4,
+	FS_DQ_CACHE_HITS = 5,
+	FS_DQ_ALLOCATED = 6,
+	FS_DQ_FREE = 7,
+	FS_DQ_SYNCS = 8,
+	FS_DQ_WARNINGS = 9,
+};
+
+/* CTL_DEBUG names: */
+
+/* CTL_DEV names: */
+enum {
+	DEV_CDROM=1,
+	DEV_HWMON=2,
+	DEV_PARPORT=3,
+	DEV_RAID=4,
+	DEV_MAC_HID=5,
+	DEV_SCSI=6,
+	DEV_IPMI=7,
+};
+
+/* /proc/sys/dev/cdrom */
+enum {
+	DEV_CDROM_INFO=1,
+	DEV_CDROM_AUTOCLOSE=2,
+	DEV_CDROM_AUTOEJECT=3,
+	DEV_CDROM_DEBUG=4,
+	DEV_CDROM_LOCK=5,
+	DEV_CDROM_CHECK_MEDIA=6
+};
+
+/* /proc/sys/dev/parport */
+enum {
+	DEV_PARPORT_DEFAULT=-3
+};
+
+/* /proc/sys/dev/raid */
+enum {
+	DEV_RAID_SPEED_LIMIT_MIN=1,
+	DEV_RAID_SPEED_LIMIT_MAX=2
+};
+
+/* /proc/sys/dev/parport/default */
+enum {
+	DEV_PARPORT_DEFAULT_TIMESLICE=1,
+	DEV_PARPORT_DEFAULT_SPINTIME=2
+};
+
+/* /proc/sys/dev/parport/parport n */
+enum {
+	DEV_PARPORT_SPINTIME=1,
+	DEV_PARPORT_BASE_ADDR=2,
+	DEV_PARPORT_IRQ=3,
+	DEV_PARPORT_DMA=4,
+	DEV_PARPORT_MODES=5,
+	DEV_PARPORT_DEVICES=6,
+	DEV_PARPORT_AUTOPROBE=16
+};
+
+/* /proc/sys/dev/parport/parport n/devices/ */
+enum {
+	DEV_PARPORT_DEVICES_ACTIVE=-3,
+};
+
+/* /proc/sys/dev/parport/parport n/devices/device n */
+enum {
+	DEV_PARPORT_DEVICE_TIMESLICE=1,
+};
+
+/* /proc/sys/dev/mac_hid */
+enum {
+	DEV_MAC_HID_KEYBOARD_SENDS_LINUX_KEYCODES=1,
+	DEV_MAC_HID_KEYBOARD_LOCK_KEYCODES=2,
+	DEV_MAC_HID_MOUSE_BUTTON_EMULATION=3,
+	DEV_MAC_HID_MOUSE_BUTTON2_KEYCODE=4,
+	DEV_MAC_HID_MOUSE_BUTTON3_KEYCODE=5,
+	DEV_MAC_HID_ADB_MOUSE_SENDS_KEYCODES=6
+};
+
+/* /proc/sys/dev/scsi */
+enum {
+	DEV_SCSI_LOGGING_LEVEL=1,
+};
+
+/* /proc/sys/dev/ipmi */
+enum {
+	DEV_IPMI_POWEROFF_POWERCYCLE=1,
+};
+
+/* /proc/sys/abi */
+enum
+{
+	ABI_DEFHANDLER_COFF=1,	/* default handler for coff binaries */
+	ABI_DEFHANDLER_ELF=2, 	/* default handler for ELF binaries */
+	ABI_DEFHANDLER_LCALL7=3,/* default handler for procs using lcall7 */
+	ABI_DEFHANDLER_LIBCSO=4,/* default handler for an libc.so ELF interp */
+	ABI_TRACE=5,		/* tracing flags */
+	ABI_FAKE_UTSNAME=6,	/* fake target utsname information */
+};
+
+
+#endif /* _UAPI_LINUX_SYSCTL_H */
diff --git a/include/uapi/linux/sysinfo.h b/include/uapi/linux/sysinfo.h
new file mode 100644
index 00000000000..934335a2252
--- /dev/null
+++ b/include/uapi/linux/sysinfo.h
@@ -0,0 +1,24 @@
+#ifndef _LINUX_SYSINFO_H
+#define _LINUX_SYSINFO_H
+
+#include <linux/types.h>
+
+#define SI_LOAD_SHIFT	16
+struct sysinfo {
+	__kernel_long_t uptime;		/* Seconds since boot */
+	__kernel_ulong_t loads[3];	/* 1, 5, and 15 minute load averages */
+	__kernel_ulong_t totalram;	/* Total usable main memory size */
+	__kernel_ulong_t freeram;	/* Available memory size */
+	__kernel_ulong_t sharedram;	/* Amount of shared memory */
+	__kernel_ulong_t bufferram;	/* Memory used by buffers */
+	__kernel_ulong_t totalswap;	/* Total swap space size */
+	__kernel_ulong_t freeswap;	/* swap space still available */
+	__u16 procs;		   	/* Number of current processes */
+	__u16 pad;		   	/* Explicit padding for m68k */
+	__kernel_ulong_t totalhigh;	/* Total high memory size */
+	__kernel_ulong_t freehigh;	/* Available high memory size */
+	__u32 mem_unit;			/* Memory unit size in bytes */
+	char _f[20-2*sizeof(__kernel_ulong_t)-sizeof(__u32)];	/* Padding: libc5 uses this.. */
+};
+
+#endif /* _LINUX_SYSINFO_H */
diff --git a/include/uapi/linux/taskstats.h b/include/uapi/linux/taskstats.h
new file mode 100644
index 00000000000..2466e550a41
--- /dev/null
+++ b/include/uapi/linux/taskstats.h
@@ -0,0 +1,213 @@
+/* taskstats.h - exporting per-task statistics
+ *
+ * Copyright (C) Shailabh Nagar, IBM Corp. 2006
+ *           (C) Balbir Singh,   IBM Corp. 2006
+ *           (C) Jay Lan,        SGI, 2006
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _LINUX_TASKSTATS_H
+#define _LINUX_TASKSTATS_H
+
+#include <linux/types.h>
+
+/* Format for per-task data returned to userland when
+ *	- a task exits
+ *	- listener requests stats for a task
+ *
+ * The struct is versioned. Newer versions should only add fields to
+ * the bottom of the struct to maintain backward compatibility.
+ *
+ *
+ * To add new fields
+ *	a) bump up TASKSTATS_VERSION
+ *	b) add comment indicating new version number at end of struct
+ *	c) add new fields after version comment; maintain 64-bit alignment
+ */
+
+
+#define TASKSTATS_VERSION	8
+#define TS_COMM_LEN		32	/* should be >= TASK_COMM_LEN
+					 * in linux/sched.h */
+
+struct taskstats {
+
+	/* The version number of this struct. This field is always set to
+	 * TAKSTATS_VERSION, which is defined in <linux/taskstats.h>.
+	 * Each time the struct is changed, the value should be incremented.
+	 */
+	__u16	version;
+	__u32	ac_exitcode;		/* Exit status */
+
+	/* The accounting flags of a task as defined in <linux/acct.h>
+	 * Defined values are AFORK, ASU, ACOMPAT, ACORE, and AXSIG.
+	 */
+	__u8	ac_flag;		/* Record flags */
+	__u8	ac_nice;		/* task_nice */
+
+	/* Delay accounting fields start
+	 *
+	 * All values, until comment "Delay accounting fields end" are
+	 * available only if delay accounting is enabled, even though the last
+	 * few fields are not delays
+	 *
+	 * xxx_count is the number of delay values recorded
+	 * xxx_delay_total is the corresponding cumulative delay in nanoseconds
+	 *
+	 * xxx_delay_total wraps around to zero on overflow
+	 * xxx_count incremented regardless of overflow
+	 */
+
+	/* Delay waiting for cpu, while runnable
+	 * count, delay_total NOT updated atomically
+	 */
+	__u64	cpu_count __attribute__((aligned(8)));
+	__u64	cpu_delay_total;
+
+	/* Following four fields atomically updated using task->delays->lock */
+
+	/* Delay waiting for synchronous block I/O to complete
+	 * does not account for delays in I/O submission
+	 */
+	__u64	blkio_count;
+	__u64	blkio_delay_total;
+
+	/* Delay waiting for page fault I/O (swap in only) */
+	__u64	swapin_count;
+	__u64	swapin_delay_total;
+
+	/* cpu "wall-clock" running time
+	 * On some architectures, value will adjust for cpu time stolen
+	 * from the kernel in involuntary waits due to virtualization.
+	 * Value is cumulative, in nanoseconds, without a corresponding count
+	 * and wraps around to zero silently on overflow
+	 */
+	__u64	cpu_run_real_total;
+
+	/* cpu "virtual" running time
+	 * Uses time intervals seen by the kernel i.e. no adjustment
+	 * for kernel's involuntary waits due to virtualization.
+	 * Value is cumulative, in nanoseconds, without a corresponding count
+	 * and wraps around to zero silently on overflow
+	 */
+	__u64	cpu_run_virtual_total;
+	/* Delay accounting fields end */
+	/* version 1 ends here */
+
+	/* Basic Accounting Fields start */
+	char	ac_comm[TS_COMM_LEN];	/* Command name */
+	__u8	ac_sched __attribute__((aligned(8)));
+					/* Scheduling discipline */
+	__u8	ac_pad[3];
+	__u32	ac_uid __attribute__((aligned(8)));
+					/* User ID */
+	__u32	ac_gid;			/* Group ID */
+	__u32	ac_pid;			/* Process ID */
+	__u32	ac_ppid;		/* Parent process ID */
+	__u32	ac_btime;		/* Begin time [sec since 1970] */
+	__u64	ac_etime __attribute__((aligned(8)));
+					/* Elapsed time [usec] */
+	__u64	ac_utime;		/* User CPU time [usec] */
+	__u64	ac_stime;		/* SYstem CPU time [usec] */
+	__u64	ac_minflt;		/* Minor Page Fault Count */
+	__u64	ac_majflt;		/* Major Page Fault Count */
+	/* Basic Accounting Fields end */
+
+	/* Extended accounting fields start */
+	/* Accumulated RSS usage in duration of a task, in MBytes-usecs.
+	 * The current rss usage is added to this counter every time
+	 * a tick is charged to a task's system time. So, at the end we
+	 * will have memory usage multiplied by system time. Thus an
+	 * average usage per system time unit can be calculated.
+	 */
+	__u64	coremem;		/* accumulated RSS usage in MB-usec */
+	/* Accumulated virtual memory usage in duration of a task.
+	 * Same as acct_rss_mem1 above except that we keep track of VM usage.
+	 */
+	__u64	virtmem;		/* accumulated VM  usage in MB-usec */
+
+	/* High watermark of RSS and virtual memory usage in duration of
+	 * a task, in KBytes.
+	 */
+	__u64	hiwater_rss;		/* High-watermark of RSS usage, in KB */
+	__u64	hiwater_vm;		/* High-water VM usage, in KB */
+
+	/* The following four fields are I/O statistics of a task. */
+	__u64	read_char;		/* bytes read */
+	__u64	write_char;		/* bytes written */
+	__u64	read_syscalls;		/* read syscalls */
+	__u64	write_syscalls;		/* write syscalls */
+	/* Extended accounting fields end */
+
+#define TASKSTATS_HAS_IO_ACCOUNTING
+	/* Per-task storage I/O accounting starts */
+	__u64	read_bytes;		/* bytes of read I/O */
+	__u64	write_bytes;		/* bytes of write I/O */
+	__u64	cancelled_write_bytes;	/* bytes of cancelled write I/O */
+
+	__u64  nvcsw;			/* voluntary_ctxt_switches */
+	__u64  nivcsw;			/* nonvoluntary_ctxt_switches */
+
+	/* time accounting for SMT machines */
+	__u64	ac_utimescaled;		/* utime scaled on frequency etc */
+	__u64	ac_stimescaled;		/* stime scaled on frequency etc */
+	__u64	cpu_scaled_run_real_total; /* scaled cpu_run_real_total */
+
+	/* Delay waiting for memory reclaim */
+	__u64	freepages_count;
+	__u64	freepages_delay_total;
+};
+
+
+/*
+ * Commands sent from userspace
+ * Not versioned. New commands should only be inserted at the enum's end
+ * prior to __TASKSTATS_CMD_MAX
+ */
+
+enum {
+	TASKSTATS_CMD_UNSPEC = 0,	/* Reserved */
+	TASKSTATS_CMD_GET,		/* user->kernel request/get-response */
+	TASKSTATS_CMD_NEW,		/* kernel->user event */
+	__TASKSTATS_CMD_MAX,
+};
+
+#define TASKSTATS_CMD_MAX (__TASKSTATS_CMD_MAX - 1)
+
+enum {
+	TASKSTATS_TYPE_UNSPEC = 0,	/* Reserved */
+	TASKSTATS_TYPE_PID,		/* Process id */
+	TASKSTATS_TYPE_TGID,		/* Thread group id */
+	TASKSTATS_TYPE_STATS,		/* taskstats structure */
+	TASKSTATS_TYPE_AGGR_PID,	/* contains pid + stats */
+	TASKSTATS_TYPE_AGGR_TGID,	/* contains tgid + stats */
+	TASKSTATS_TYPE_NULL,		/* contains nothing */
+	__TASKSTATS_TYPE_MAX,
+};
+
+#define TASKSTATS_TYPE_MAX (__TASKSTATS_TYPE_MAX - 1)
+
+enum {
+	TASKSTATS_CMD_ATTR_UNSPEC = 0,
+	TASKSTATS_CMD_ATTR_PID,
+	TASKSTATS_CMD_ATTR_TGID,
+	TASKSTATS_CMD_ATTR_REGISTER_CPUMASK,
+	TASKSTATS_CMD_ATTR_DEREGISTER_CPUMASK,
+	__TASKSTATS_CMD_ATTR_MAX,
+};
+
+#define TASKSTATS_CMD_ATTR_MAX (__TASKSTATS_CMD_ATTR_MAX - 1)
+
+/* NETLINK_GENERIC related info */
+
+#define TASKSTATS_GENL_NAME	"TASKSTATS"
+#define TASKSTATS_GENL_VERSION	0x1
+
+#endif /* _LINUX_TASKSTATS_H */
diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h
new file mode 100644
index 00000000000..c4b89a5cb7d
--- /dev/null
+++ b/include/uapi/linux/tcp.h
@@ -0,0 +1,225 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the TCP protocol.
+ *
+ * Version:	@(#)tcp.h	1.0.2	04/28/93
+ *
+ * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_LINUX_TCP_H
+#define _UAPI_LINUX_TCP_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+#include <linux/socket.h>
+
+struct tcphdr {
+	__be16	source;
+	__be16	dest;
+	__be32	seq;
+	__be32	ack_seq;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u16	res1:4,
+		doff:4,
+		fin:1,
+		syn:1,
+		rst:1,
+		psh:1,
+		ack:1,
+		urg:1,
+		ece:1,
+		cwr:1;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	__u16	doff:4,
+		res1:4,
+		cwr:1,
+		ece:1,
+		urg:1,
+		ack:1,
+		psh:1,
+		rst:1,
+		syn:1,
+		fin:1;
+#else
+#error	"Adjust your <asm/byteorder.h> defines"
+#endif	
+	__be16	window;
+	__sum16	check;
+	__be16	urg_ptr;
+};
+
+/*
+ *	The union cast uses a gcc extension to avoid aliasing problems
+ *  (union is compatible to any of its members)
+ *  This means this part of the code is -fstrict-aliasing safe now.
+ */
+union tcp_word_hdr { 
+	struct tcphdr hdr;
+	__be32 		  words[5];
+}; 
+
+#define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3]) 
+
+enum { 
+	TCP_FLAG_CWR = __constant_cpu_to_be32(0x00800000),
+	TCP_FLAG_ECE = __constant_cpu_to_be32(0x00400000),
+	TCP_FLAG_URG = __constant_cpu_to_be32(0x00200000),
+	TCP_FLAG_ACK = __constant_cpu_to_be32(0x00100000),
+	TCP_FLAG_PSH = __constant_cpu_to_be32(0x00080000),
+	TCP_FLAG_RST = __constant_cpu_to_be32(0x00040000),
+	TCP_FLAG_SYN = __constant_cpu_to_be32(0x00020000),
+	TCP_FLAG_FIN = __constant_cpu_to_be32(0x00010000),
+	TCP_RESERVED_BITS = __constant_cpu_to_be32(0x0F000000),
+	TCP_DATA_OFFSET = __constant_cpu_to_be32(0xF0000000)
+}; 
+
+/*
+ * TCP general constants
+ */
+#define TCP_MSS_DEFAULT		 536U	/* IPv4 (RFC1122, RFC2581) */
+#define TCP_MSS_DESIRED		1220U	/* IPv6 (tunneled), EDNS0 (RFC3226) */
+
+/* TCP socket options */
+#define TCP_NODELAY		1	/* Turn off Nagle's algorithm. */
+#define TCP_MAXSEG		2	/* Limit MSS */
+#define TCP_CORK		3	/* Never send partially complete segments */
+#define TCP_KEEPIDLE		4	/* Start keeplives after this period */
+#define TCP_KEEPINTVL		5	/* Interval between keepalives */
+#define TCP_KEEPCNT		6	/* Number of keepalives before death */
+#define TCP_SYNCNT		7	/* Number of SYN retransmits */
+#define TCP_LINGER2		8	/* Life time of orphaned FIN-WAIT-2 state */
+#define TCP_DEFER_ACCEPT	9	/* Wake up listener only when data arrive */
+#define TCP_WINDOW_CLAMP	10	/* Bound advertised window */
+#define TCP_INFO		11	/* Information about this connection. */
+#define TCP_QUICKACK		12	/* Block/reenable quick acks */
+#define TCP_CONGESTION		13	/* Congestion control algorithm */
+#define TCP_MD5SIG		14	/* TCP MD5 Signature (RFC2385) */
+#define TCP_COOKIE_TRANSACTIONS	15	/* TCP Cookie Transactions */
+#define TCP_THIN_LINEAR_TIMEOUTS 16      /* Use linear timeouts for thin streams*/
+#define TCP_THIN_DUPACK         17      /* Fast retrans. after 1 dupack */
+#define TCP_USER_TIMEOUT	18	/* How long for loss retry before timeout */
+#define TCP_REPAIR		19	/* TCP sock is under repair right now */
+#define TCP_REPAIR_QUEUE	20
+#define TCP_QUEUE_SEQ		21
+#define TCP_REPAIR_OPTIONS	22
+#define TCP_FASTOPEN		23	/* Enable FastOpen on listeners */
+
+struct tcp_repair_opt {
+	__u32	opt_code;
+	__u32	opt_val;
+};
+
+enum {
+	TCP_NO_QUEUE,
+	TCP_RECV_QUEUE,
+	TCP_SEND_QUEUE,
+	TCP_QUEUES_NR,
+};
+
+/* for TCP_INFO socket option */
+#define TCPI_OPT_TIMESTAMPS	1
+#define TCPI_OPT_SACK		2
+#define TCPI_OPT_WSCALE		4
+#define TCPI_OPT_ECN		8 /* ECN was negociated at TCP session init */
+#define TCPI_OPT_ECN_SEEN	16 /* we received at least one packet with ECT */
+
+enum tcp_ca_state {
+	TCP_CA_Open = 0,
+#define TCPF_CA_Open	(1<<TCP_CA_Open)
+	TCP_CA_Disorder = 1,
+#define TCPF_CA_Disorder (1<<TCP_CA_Disorder)
+	TCP_CA_CWR = 2,
+#define TCPF_CA_CWR	(1<<TCP_CA_CWR)
+	TCP_CA_Recovery = 3,
+#define TCPF_CA_Recovery (1<<TCP_CA_Recovery)
+	TCP_CA_Loss = 4
+#define TCPF_CA_Loss	(1<<TCP_CA_Loss)
+};
+
+struct tcp_info {
+	__u8	tcpi_state;
+	__u8	tcpi_ca_state;
+	__u8	tcpi_retransmits;
+	__u8	tcpi_probes;
+	__u8	tcpi_backoff;
+	__u8	tcpi_options;
+	__u8	tcpi_snd_wscale : 4, tcpi_rcv_wscale : 4;
+
+	__u32	tcpi_rto;
+	__u32	tcpi_ato;
+	__u32	tcpi_snd_mss;
+	__u32	tcpi_rcv_mss;
+
+	__u32	tcpi_unacked;
+	__u32	tcpi_sacked;
+	__u32	tcpi_lost;
+	__u32	tcpi_retrans;
+	__u32	tcpi_fackets;
+
+	/* Times. */
+	__u32	tcpi_last_data_sent;
+	__u32	tcpi_last_ack_sent;     /* Not remembered, sorry. */
+	__u32	tcpi_last_data_recv;
+	__u32	tcpi_last_ack_recv;
+
+	/* Metrics. */
+	__u32	tcpi_pmtu;
+	__u32	tcpi_rcv_ssthresh;
+	__u32	tcpi_rtt;
+	__u32	tcpi_rttvar;
+	__u32	tcpi_snd_ssthresh;
+	__u32	tcpi_snd_cwnd;
+	__u32	tcpi_advmss;
+	__u32	tcpi_reordering;
+
+	__u32	tcpi_rcv_rtt;
+	__u32	tcpi_rcv_space;
+
+	__u32	tcpi_total_retrans;
+};
+
+/* for TCP_MD5SIG socket option */
+#define TCP_MD5SIG_MAXKEYLEN	80
+
+struct tcp_md5sig {
+	struct __kernel_sockaddr_storage tcpm_addr;	/* address associated */
+	__u16	__tcpm_pad1;				/* zero */
+	__u16	tcpm_keylen;				/* key length */
+	__u32	__tcpm_pad2;				/* zero */
+	__u8	tcpm_key[TCP_MD5SIG_MAXKEYLEN];		/* key (binary) */
+};
+
+/* for TCP_COOKIE_TRANSACTIONS (TCPCT) socket option */
+#define TCP_COOKIE_MIN		 8		/*  64-bits */
+#define TCP_COOKIE_MAX		16		/* 128-bits */
+#define TCP_COOKIE_PAIR_SIZE	(2*TCP_COOKIE_MAX)
+
+/* Flags for both getsockopt and setsockopt */
+#define TCP_COOKIE_IN_ALWAYS	(1 << 0)	/* Discard SYN without cookie */
+#define TCP_COOKIE_OUT_NEVER	(1 << 1)	/* Prohibit outgoing cookies,
+						 * supercedes everything. */
+
+/* Flags for getsockopt */
+#define TCP_S_DATA_IN		(1 << 2)	/* Was data received? */
+#define TCP_S_DATA_OUT		(1 << 3)	/* Was data sent? */
+
+/* TCP_COOKIE_TRANSACTIONS data */
+struct tcp_cookie_transactions {
+	__u16	tcpct_flags;			/* see above */
+	__u8	__tcpct_pad1;			/* zero */
+	__u8	tcpct_cookie_desired;		/* bytes */
+	__u16	tcpct_s_data_desired;		/* bytes of variable data */
+	__u16	tcpct_used;			/* bytes in value */
+	__u8	tcpct_value[TCP_MSS_DEFAULT];
+};
+
+
+#endif /* _UAPI_LINUX_TCP_H */
diff --git a/include/uapi/linux/tcp_metrics.h b/include/uapi/linux/tcp_metrics.h
new file mode 100644
index 00000000000..cb5157b55f3
--- /dev/null
+++ b/include/uapi/linux/tcp_metrics.h
@@ -0,0 +1,54 @@
+/* tcp_metrics.h - TCP Metrics Interface */
+
+#ifndef _LINUX_TCP_METRICS_H
+#define _LINUX_TCP_METRICS_H
+
+#include <linux/types.h>
+
+/* NETLINK_GENERIC related info
+ */
+#define TCP_METRICS_GENL_NAME		"tcp_metrics"
+#define TCP_METRICS_GENL_VERSION	0x1
+
+enum tcp_metric_index {
+	TCP_METRIC_RTT,
+	TCP_METRIC_RTTVAR,
+	TCP_METRIC_SSTHRESH,
+	TCP_METRIC_CWND,
+	TCP_METRIC_REORDERING,
+
+	/* Always last.  */
+	__TCP_METRIC_MAX,
+};
+
+#define TCP_METRIC_MAX	(__TCP_METRIC_MAX - 1)
+
+enum {
+	TCP_METRICS_ATTR_UNSPEC,
+	TCP_METRICS_ATTR_ADDR_IPV4,		/* u32 */
+	TCP_METRICS_ATTR_ADDR_IPV6,		/* binary */
+	TCP_METRICS_ATTR_AGE,			/* msecs */
+	TCP_METRICS_ATTR_TW_TSVAL,		/* u32, raw, rcv tsval */
+	TCP_METRICS_ATTR_TW_TS_STAMP,		/* s32, sec age */
+	TCP_METRICS_ATTR_VALS,			/* nested +1, u32 */
+	TCP_METRICS_ATTR_FOPEN_MSS,		/* u16 */
+	TCP_METRICS_ATTR_FOPEN_SYN_DROPS,	/* u16, count of drops */
+	TCP_METRICS_ATTR_FOPEN_SYN_DROP_TS,	/* msecs age */
+	TCP_METRICS_ATTR_FOPEN_COOKIE,		/* binary */
+
+	__TCP_METRICS_ATTR_MAX,
+};
+
+#define TCP_METRICS_ATTR_MAX	(__TCP_METRICS_ATTR_MAX - 1)
+
+enum {
+	TCP_METRICS_CMD_UNSPEC,
+	TCP_METRICS_CMD_GET,
+	TCP_METRICS_CMD_DEL,
+
+	__TCP_METRICS_CMD_MAX,
+};
+
+#define TCP_METRICS_CMD_MAX	(__TCP_METRICS_CMD_MAX - 1)
+
+#endif /* _LINUX_TCP_METRICS_H */
diff --git a/include/uapi/linux/telephony.h b/include/uapi/linux/telephony.h
new file mode 100644
index 00000000000..f63afe330ad
--- /dev/null
+++ b/include/uapi/linux/telephony.h
@@ -0,0 +1,262 @@
+/******************************************************************************
+ *
+ *		telephony.h
+ *
+ *		Basic Linux Telephony Interface
+ *
+ *		(c) Copyright 1999-2001 Quicknet Technologies, Inc.
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ *    Authors:       Ed Okerson, <eokerson@quicknet.net>
+ *                   Greg Herlein, <gherlein@quicknet.net>
+ *
+ *    Contributors:  Alan Cox, <alan@lxorguk.ukuu.org.uk>
+ *                   David W. Erhart, <derhart@quicknet.net>
+ *
+ * IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY FOR
+ * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT
+ * OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF QUICKNET
+ * TECHNOLOGIES, INC. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * QUICKNET TECHNOLOGIES, INC. SPECIFICALLY DISCLAIMS ANY WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
+ * ON AN "AS IS" BASIS, AND QUICKNET TECHNOLOGIES, INC. HAS NO OBLIGATION
+ * TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
+ *
+ *****************************************************************************/
+
+#ifndef TELEPHONY_H
+#define TELEPHONY_H
+
+#define TELEPHONY_VERSION 3013
+
+#define PHONE_VENDOR_IXJ          1
+#define PHONE_VENDOR_QUICKNET	  PHONE_VENDOR_IXJ
+#define PHONE_VENDOR_VOICETRONIX  2
+#define PHONE_VENDOR_ACULAB       3
+#define PHONE_VENDOR_DIGI         4
+#define PHONE_VENDOR_FRANKLIN     5
+
+/******************************************************************************
+ *  Vendor Summary Information Area
+ *
+ *  Quicknet Technologies, Inc. - makes low density analog telephony cards
+ *    with audio compression, POTS and PSTN interfaces (www.quicknet.net)
+ *
+ *  (other vendors following this API shuld add a short description of
+ *  the telephony products they support under Linux)
+ *
+ *****************************************************************************/
+#define QTI_PHONEJACK		100
+#define QTI_LINEJACK		300
+#define QTI_PHONEJACK_LITE	400
+#define QTI_PHONEJACK_PCI	500
+#define QTI_PHONECARD		600
+
+/******************************************************************************
+*
+* The capabilities ioctls can inform you of the capabilities of each phone
+* device installed in your system.  The PHONECTL_CAPABILITIES ioctl
+* returns an integer value indicating the number of capabilities the   
+* device has.  The PHONECTL_CAPABILITIES_LIST will fill an array of 
+* capability structs with all of its capabilities.  The
+* PHONECTL_CAPABILITIES_CHECK takes a single capability struct and returns
+* a TRUE if the device has that capability, otherwise it returns false.
+* 
+******************************************************************************/
+typedef enum {
+	vendor = 0,
+	device,
+	port,
+	codec,
+	dsp
+} phone_cap;
+
+struct phone_capability {
+	char desc[80];
+	phone_cap captype;
+	int cap;
+	int handle;
+};
+
+typedef enum {
+	pots = 0,
+	pstn,
+	handset,
+	speaker
+} phone_ports;
+
+#define PHONE_CAPABILITIES              _IO  ('q', 0x80)
+#define PHONE_CAPABILITIES_LIST         _IOR ('q', 0x81, struct phone_capability *)
+#define PHONE_CAPABILITIES_CHECK        _IOW ('q', 0x82, struct phone_capability *)
+
+typedef struct {
+        char month[3];
+        char day[3];
+        char hour[3];
+        char min[3];
+        int numlen;
+        char number[11];
+        int namelen;
+        char name[80];
+} PHONE_CID;
+ 
+#define PHONE_RING			_IO  ('q', 0x83)
+#define PHONE_HOOKSTATE			_IO  ('q', 0x84)
+#define PHONE_MAXRINGS			_IOW ('q', 0x85, char)
+#define PHONE_RING_CADENCE		_IOW ('q', 0x86, short)
+#define OLD_PHONE_RING_START            _IO  ('q', 0x87)
+#define PHONE_RING_START		_IOW ('q', 0x87, PHONE_CID *)
+#define PHONE_RING_STOP			_IO  ('q', 0x88)
+
+#define USA_RING_CADENCE	 0xC0C0
+
+#define PHONE_REC_CODEC			_IOW ('q', 0x89, int)
+#define PHONE_REC_START			_IO  ('q', 0x8A)
+#define PHONE_REC_STOP			_IO  ('q', 0x8B)
+#define PHONE_REC_DEPTH			_IOW ('q', 0x8C, int)
+#define PHONE_FRAME			_IOW ('q', 0x8D, int)
+#define PHONE_REC_VOLUME		_IOW ('q', 0x8E, int)
+#define PHONE_REC_VOLUME_LINEAR		_IOW ('q', 0xDB, int)
+#define PHONE_REC_LEVEL			_IO  ('q', 0x8F)
+
+#define PHONE_PLAY_CODEC		_IOW ('q', 0x90, int)
+#define PHONE_PLAY_START		_IO  ('q', 0x91)
+#define PHONE_PLAY_STOP			_IO  ('q', 0x92)
+#define PHONE_PLAY_DEPTH		_IOW ('q', 0x93, int)
+#define PHONE_PLAY_VOLUME		_IOW ('q', 0x94, int)
+#define PHONE_PLAY_VOLUME_LINEAR	_IOW ('q', 0xDC, int)
+#define PHONE_PLAY_LEVEL		_IO  ('q', 0x95)
+#define PHONE_DTMF_READY		_IOR ('q', 0x96, int)
+#define PHONE_GET_DTMF			_IOR ('q', 0x97, int)
+#define PHONE_GET_DTMF_ASCII		_IOR ('q', 0x98, int)
+#define PHONE_DTMF_OOB			_IOW ('q', 0x99, int)
+#define PHONE_EXCEPTION			_IOR ('q', 0x9A, int)
+#define PHONE_PLAY_TONE			_IOW ('q', 0x9B, char)
+#define PHONE_SET_TONE_ON_TIME		_IOW ('q', 0x9C, int)
+#define PHONE_SET_TONE_OFF_TIME		_IOW ('q', 0x9D, int)
+#define PHONE_GET_TONE_ON_TIME		_IO  ('q', 0x9E)
+#define PHONE_GET_TONE_OFF_TIME		_IO  ('q', 0x9F)
+#define PHONE_GET_TONE_STATE		_IO  ('q', 0xA0)
+#define PHONE_BUSY			_IO  ('q', 0xA1)
+#define PHONE_RINGBACK			_IO  ('q', 0xA2)
+#define PHONE_DIALTONE			_IO  ('q', 0xA3)
+#define PHONE_CPT_STOP			_IO  ('q', 0xA4)
+
+#define PHONE_PSTN_SET_STATE		_IOW ('q', 0xA4, int)
+#define PHONE_PSTN_GET_STATE		_IO  ('q', 0xA5)
+
+#define PSTN_ON_HOOK		0
+#define PSTN_RINGING		1
+#define PSTN_OFF_HOOK		2
+#define PSTN_PULSE_DIAL		3
+
+/******************************************************************************
+* 
+* The wink duration is tunable with this ioctl.  The default wink duration  
+* is 320ms.  You do not need to use this ioctl if you do not require a
+* different wink duration.
+* 
+******************************************************************************/
+#define PHONE_WINK_DURATION		_IOW ('q', 0xA6, int)
+#define PHONE_WINK			_IOW ('q', 0xAA, int)
+
+/******************************************************************************
+* 
+*  Codec Definitions
+* 
+******************************************************************************/
+typedef enum {
+	G723_63 = 1,
+	G723_53 = 2,
+	TS85 = 3,
+	TS48 = 4,
+	TS41 = 5,
+	G728 = 6,
+	G729 = 7,
+	ULAW = 8,
+	ALAW = 9,
+	LINEAR16 = 10,
+	LINEAR8 = 11,
+	WSS = 12,
+	G729B = 13
+} phone_codec;
+
+struct phone_codec_data
+{
+        phone_codec type;
+        unsigned short buf_min, buf_opt, buf_max;
+};
+
+#define PHONE_QUERY_CODEC               _IOWR ('q', 0xA7, struct phone_codec_data *)
+#define PHONE_PSTN_LINETEST             _IO ('q', 0xA8)
+
+/******************************************************************************
+* 
+* This controls the VAD/CNG functionality of G.723.1.  The driver will
+* always pass full size frames, any unused bytes will be padded with zeros,
+* and frames passed to the driver should also be padded with zeros.  The
+* frame type is encoded in the least significant two bits of the first
+* WORD of the frame as follows:
+*
+* bits 1-0	Frame Type	Data Rate		Significant Words
+* 00		0		G.723.1 6.3		12
+* 01		1		G.723.1 5.3		10
+* 10		2		VAD/CNG			 2
+* 11		3		Repeat last CNG		 2 bits
+* 
+******************************************************************************/
+#define PHONE_VAD			_IOW ('q', 0xA9, int)
+
+
+/******************************************************************************
+*
+* The exception structure allows us to multiplex multiple events onto the
+* select() exception set.  If any of these flags are set select() will
+* return with a positive indication on the exception set.  The dtmf_ready
+* bit indicates if there is data waiting in the DTMF buffer.  The
+* hookstate bit is set if there is a change in hookstate status, it does not
+* indicate the current state of the hookswitch.  The pstn_ring bit
+* indicates that the DAA on a LineJACK card has detected ring voltage on
+* the PSTN port.  The caller_id bit indicates that caller_id data has been
+* received and is available.  The pstn_wink bit indicates that the DAA on
+* the LineJACK has received a wink from the telco switch.  The f0, f1, f2
+* and f3 bits indicate that the filter has been triggered by detecting the
+* frequency programmed into that filter.
+*
+* The remaining bits should be set to zero. They will become defined over time
+* for other interface cards and their needs.
+*
+******************************************************************************/
+struct phone_except
+{
+	unsigned int dtmf_ready:1;
+	unsigned int hookstate:1;
+	unsigned int pstn_ring:1;
+	unsigned int caller_id:1;
+	unsigned int pstn_wink:1;
+	unsigned int f0:1;
+	unsigned int f1:1;
+	unsigned int f2:1;
+	unsigned int f3:1;
+	unsigned int flash:1;
+	unsigned int fc0:1;
+	unsigned int fc1:1;
+	unsigned int fc2:1;
+	unsigned int fc3:1;
+	unsigned int reserved:18;
+};
+
+union telephony_exception {
+	struct phone_except bits;
+	unsigned int bytes;
+};
+
+
+#endif		/* TELEPHONY_H */
+
diff --git a/include/uapi/linux/termios.h b/include/uapi/linux/termios.h
new file mode 100644
index 00000000000..2acd0c1f8a2
--- /dev/null
+++ b/include/uapi/linux/termios.h
@@ -0,0 +1,22 @@
+#ifndef _LINUX_TERMIOS_H
+#define _LINUX_TERMIOS_H
+
+#include <linux/types.h>
+#include <asm/termios.h>
+
+#define NFF	5
+
+struct termiox
+{
+	__u16	x_hflag;
+	__u16	x_cflag;
+	__u16	x_rflag[NFF];
+	__u16	x_sflag;
+};
+
+#define	RTSXOFF		0x0001		/* RTS flow control on input */
+#define	CTSXON		0x0002		/* CTS flow control on output */
+#define	DTRXOFF		0x0004		/* DTR flow control on input */
+#define DSRXON		0x0008		/* DCD flow control on output */
+
+#endif
diff --git a/include/uapi/linux/time.h b/include/uapi/linux/time.h
new file mode 100644
index 00000000000..0d3c0edc3ed
--- /dev/null
+++ b/include/uapi/linux/time.h
@@ -0,0 +1,71 @@
+#ifndef _UAPI_LINUX_TIME_H
+#define _UAPI_LINUX_TIME_H
+
+#include <linux/types.h>
+
+
+#ifndef _STRUCT_TIMESPEC
+#define _STRUCT_TIMESPEC
+struct timespec {
+	__kernel_time_t	tv_sec;			/* seconds */
+	long		tv_nsec;		/* nanoseconds */
+};
+#endif
+
+struct timeval {
+	__kernel_time_t		tv_sec;		/* seconds */
+	__kernel_suseconds_t	tv_usec;	/* microseconds */
+};
+
+struct timezone {
+	int	tz_minuteswest;	/* minutes west of Greenwich */
+	int	tz_dsttime;	/* type of dst correction */
+};
+
+
+/*
+ * Names of the interval timers, and structure
+ * defining a timer setting:
+ */
+#define	ITIMER_REAL		0
+#define	ITIMER_VIRTUAL		1
+#define	ITIMER_PROF		2
+
+struct itimerspec {
+	struct timespec it_interval;	/* timer period */
+	struct timespec it_value;	/* timer expiration */
+};
+
+struct itimerval {
+	struct timeval it_interval;	/* timer interval */
+	struct timeval it_value;	/* current value */
+};
+
+/*
+ * The IDs of the various system clocks (for POSIX.1b interval timers):
+ */
+#define CLOCK_REALTIME			0
+#define CLOCK_MONOTONIC			1
+#define CLOCK_PROCESS_CPUTIME_ID	2
+#define CLOCK_THREAD_CPUTIME_ID		3
+#define CLOCK_MONOTONIC_RAW		4
+#define CLOCK_REALTIME_COARSE		5
+#define CLOCK_MONOTONIC_COARSE		6
+#define CLOCK_BOOTTIME			7
+#define CLOCK_REALTIME_ALARM		8
+#define CLOCK_BOOTTIME_ALARM		9
+
+/*
+ * The IDs of various hardware clocks:
+ */
+#define CLOCK_SGI_CYCLE			10
+#define MAX_CLOCKS			16
+#define CLOCKS_MASK			(CLOCK_REALTIME | CLOCK_MONOTONIC)
+#define CLOCKS_MONO			CLOCK_MONOTONIC
+
+/*
+ * The various flags for setting POSIX.1b interval timers:
+ */
+#define TIMER_ABSTIME			0x01
+
+#endif /* _UAPI_LINUX_TIME_H */
diff --git a/include/uapi/linux/times.h b/include/uapi/linux/times.h
new file mode 100644
index 00000000000..87b62615ced
--- /dev/null
+++ b/include/uapi/linux/times.h
@@ -0,0 +1,13 @@
+#ifndef _LINUX_TIMES_H
+#define _LINUX_TIMES_H
+
+#include <linux/types.h>
+
+struct tms {
+	__kernel_clock_t tms_utime;
+	__kernel_clock_t tms_stime;
+	__kernel_clock_t tms_cutime;
+	__kernel_clock_t tms_cstime;
+};
+
+#endif
diff --git a/include/uapi/linux/timex.h b/include/uapi/linux/timex.h
new file mode 100644
index 00000000000..a7ea81f1371
--- /dev/null
+++ b/include/uapi/linux/timex.h
@@ -0,0 +1,166 @@
+/*****************************************************************************
+ *                                                                           *
+ * Copyright (c) David L. Mills 1993                                         *
+ *                                                                           *
+ * Permission to use, copy, modify, and distribute this software and its     *
+ * documentation for any purpose and without fee is hereby granted, provided *
+ * that the above copyright notice appears in all copies and that both the   *
+ * copyright notice and this permission notice appear in supporting          *
+ * documentation, and that the name University of Delaware not be used in    *
+ * advertising or publicity pertaining to distribution of the software       *
+ * without specific, written prior permission.  The University of Delaware   *
+ * makes no representations about the suitability this software for any      *
+ * purpose.  It is provided "as is" without express or implied warranty.     *
+ *                                                                           *
+ *****************************************************************************/
+
+/*
+ * Modification history timex.h
+ *
+ * 29 Dec 97	Russell King
+ *	Moved CLOCK_TICK_RATE, CLOCK_TICK_FACTOR and FINETUNE to asm/timex.h
+ *	for ARM machines
+ *
+ *  9 Jan 97    Adrian Sun
+ *      Shifted LATCH define to allow access to alpha machines.
+ *
+ * 26 Sep 94	David L. Mills
+ *	Added defines for hybrid phase/frequency-lock loop.
+ *
+ * 19 Mar 94	David L. Mills
+ *	Moved defines from kernel routines to header file and added new
+ *	defines for PPS phase-lock loop.
+ *
+ * 20 Feb 94	David L. Mills
+ *	Revised status codes and structures for external clock and PPS
+ *	signal discipline.
+ *
+ * 28 Nov 93	David L. Mills
+ *	Adjusted parameters to improve stability and increase poll
+ *	interval.
+ *
+ * 17 Sep 93    David L. Mills
+ *      Created file $NTP/include/sys/timex.h
+ * 07 Oct 93    Torsten Duwe
+ *      Derived linux/timex.h
+ * 1995-08-13    Torsten Duwe
+ *      kernel PLL updated to 1994-12-13 specs (rfc-1589)
+ * 1997-08-30    Ulrich Windl
+ *      Added new constant NTP_PHASE_LIMIT
+ * 2004-08-12    Christoph Lameter
+ *      Reworked time interpolation logic
+ */
+#ifndef _UAPI_LINUX_TIMEX_H
+#define _UAPI_LINUX_TIMEX_H
+
+#include <linux/time.h>
+
+#define NTP_API		4	/* NTP API version */
+
+/*
+ * syscall interface - used (mainly by NTP daemon)
+ * to discipline kernel clock oscillator
+ */
+struct timex {
+	unsigned int modes;	/* mode selector */
+	long offset;		/* time offset (usec) */
+	long freq;		/* frequency offset (scaled ppm) */
+	long maxerror;		/* maximum error (usec) */
+	long esterror;		/* estimated error (usec) */
+	int status;		/* clock command/status */
+	long constant;		/* pll time constant */
+	long precision;		/* clock precision (usec) (read only) */
+	long tolerance;		/* clock frequency tolerance (ppm)
+				 * (read only)
+				 */
+	struct timeval time;	/* (read only, except for ADJ_SETOFFSET) */
+	long tick;		/* (modified) usecs between clock ticks */
+
+	long ppsfreq;           /* pps frequency (scaled ppm) (ro) */
+	long jitter;            /* pps jitter (us) (ro) */
+	int shift;              /* interval duration (s) (shift) (ro) */
+	long stabil;            /* pps stability (scaled ppm) (ro) */
+	long jitcnt;            /* jitter limit exceeded (ro) */
+	long calcnt;            /* calibration intervals (ro) */
+	long errcnt;            /* calibration errors (ro) */
+	long stbcnt;            /* stability limit exceeded (ro) */
+
+	int tai;		/* TAI offset (ro) */
+
+	int  :32; int  :32; int  :32; int  :32;
+	int  :32; int  :32; int  :32; int  :32;
+	int  :32; int  :32; int  :32;
+};
+
+/*
+ * Mode codes (timex.mode)
+ */
+#define ADJ_OFFSET		0x0001	/* time offset */
+#define ADJ_FREQUENCY		0x0002	/* frequency offset */
+#define ADJ_MAXERROR		0x0004	/* maximum time error */
+#define ADJ_ESTERROR		0x0008	/* estimated time error */
+#define ADJ_STATUS		0x0010	/* clock status */
+#define ADJ_TIMECONST		0x0020	/* pll time constant */
+#define ADJ_TAI			0x0080	/* set TAI offset */
+#define ADJ_SETOFFSET		0x0100  /* add 'time' to current time */
+#define ADJ_MICRO		0x1000	/* select microsecond resolution */
+#define ADJ_NANO		0x2000	/* select nanosecond resolution */
+#define ADJ_TICK		0x4000	/* tick value */
+
+#ifndef __KERNEL__
+#define ADJ_OFFSET_SINGLESHOT	0x8001	/* old-fashioned adjtime */
+#define ADJ_OFFSET_SS_READ	0xa001	/* read-only adjtime */
+#endif
+
+/* NTP userland likes the MOD_ prefix better */
+#define MOD_OFFSET	ADJ_OFFSET
+#define MOD_FREQUENCY	ADJ_FREQUENCY
+#define MOD_MAXERROR	ADJ_MAXERROR
+#define MOD_ESTERROR	ADJ_ESTERROR
+#define MOD_STATUS	ADJ_STATUS
+#define MOD_TIMECONST	ADJ_TIMECONST
+#define MOD_TAI	ADJ_TAI
+#define MOD_MICRO	ADJ_MICRO
+#define MOD_NANO	ADJ_NANO
+
+
+/*
+ * Status codes (timex.status)
+ */
+#define STA_PLL		0x0001	/* enable PLL updates (rw) */
+#define STA_PPSFREQ	0x0002	/* enable PPS freq discipline (rw) */
+#define STA_PPSTIME	0x0004	/* enable PPS time discipline (rw) */
+#define STA_FLL		0x0008	/* select frequency-lock mode (rw) */
+
+#define STA_INS		0x0010	/* insert leap (rw) */
+#define STA_DEL		0x0020	/* delete leap (rw) */
+#define STA_UNSYNC	0x0040	/* clock unsynchronized (rw) */
+#define STA_FREQHOLD	0x0080	/* hold frequency (rw) */
+
+#define STA_PPSSIGNAL	0x0100	/* PPS signal present (ro) */
+#define STA_PPSJITTER	0x0200	/* PPS signal jitter exceeded (ro) */
+#define STA_PPSWANDER	0x0400	/* PPS signal wander exceeded (ro) */
+#define STA_PPSERROR	0x0800	/* PPS signal calibration error (ro) */
+
+#define STA_CLOCKERR	0x1000	/* clock hardware fault (ro) */
+#define STA_NANO	0x2000	/* resolution (0 = us, 1 = ns) (ro) */
+#define STA_MODE	0x4000	/* mode (0 = PLL, 1 = FLL) (ro) */
+#define STA_CLK		0x8000	/* clock source (0 = A, 1 = B) (ro) */
+
+/* read-only bits */
+#define STA_RONLY (STA_PPSSIGNAL | STA_PPSJITTER | STA_PPSWANDER | \
+	STA_PPSERROR | STA_CLOCKERR | STA_NANO | STA_MODE | STA_CLK)
+
+/*
+ * Clock states (time_state)
+ */
+#define TIME_OK		0	/* clock synchronized, no leap second */
+#define TIME_INS	1	/* insert leap second */
+#define TIME_DEL	2	/* delete leap second */
+#define TIME_OOP	3	/* leap second in progress */
+#define TIME_WAIT	4	/* leap second has occurred */
+#define TIME_ERROR	5	/* clock not synchronized */
+#define TIME_BAD	TIME_ERROR /* bw compat */
+
+
+#endif /* _UAPI_LINUX_TIMEX_H */
diff --git a/include/uapi/linux/tiocl.h b/include/uapi/linux/tiocl.h
new file mode 100644
index 00000000000..4756862c4ed
--- /dev/null
+++ b/include/uapi/linux/tiocl.h
@@ -0,0 +1,39 @@
+#ifndef _LINUX_TIOCL_H
+#define _LINUX_TIOCL_H
+
+#define TIOCL_SETSEL	2	/* set a selection */
+#define 	TIOCL_SELCHAR	0	/* select characters */
+#define 	TIOCL_SELWORD	1	/* select whole words */
+#define 	TIOCL_SELLINE	2	/* select whole lines */
+#define 	TIOCL_SELPOINTER	3	/* show the pointer */
+#define 	TIOCL_SELCLEAR	4	/* clear visibility of selection */
+#define 	TIOCL_SELMOUSEREPORT	16	/* report beginning of selection */
+#define 	TIOCL_SELBUTTONMASK	15	/* button mask for report */
+/* selection extent */
+struct tiocl_selection {
+	unsigned short xs;	/* X start */
+	unsigned short ys;	/* Y start */
+	unsigned short xe;	/* X end */
+	unsigned short ye;	/* Y end */
+	unsigned short sel_mode;	/* selection mode */
+};
+
+#define TIOCL_PASTESEL	3	/* paste previous selection */
+#define TIOCL_UNBLANKSCREEN	4	/* unblank screen */
+
+#define TIOCL_SELLOADLUT	5
+	/* set characters to be considered alphabetic when selecting */
+	/* u32[8] bit array, 4 bytes-aligned with type */
+
+/* these two don't return a value: they write it back in the type */
+#define TIOCL_GETSHIFTSTATE	6	/* write shift state */
+#define TIOCL_GETMOUSEREPORTING	7	/* write whether mouse event are reported */
+#define TIOCL_SETVESABLANK	10	/* set vesa blanking mode */
+#define TIOCL_SETKMSGREDIRECT	11	/* restrict kernel messages to a vt */
+#define TIOCL_GETFGCONSOLE	12	/* get foreground vt */
+#define TIOCL_SCROLLCONSOLE	13	/* scroll console */
+#define TIOCL_BLANKSCREEN	14	/* keep screen blank even if a key is pressed */
+#define TIOCL_BLANKEDSCREEN	15	/* return which vt was blanked */
+#define TIOCL_GETKMSGREDIRECT	17	/* get the vt the kernel messages are restricted to */
+
+#endif /* _LINUX_TIOCL_H */
diff --git a/include/uapi/linux/tipc.h b/include/uapi/linux/tipc.h
new file mode 100644
index 00000000000..f2d90091cc2
--- /dev/null
+++ b/include/uapi/linux/tipc.h
@@ -0,0 +1,209 @@
+/*
+ * include/linux/tipc.h: Include file for TIPC socket interface
+ *
+ * Copyright (c) 2003-2006, Ericsson AB
+ * Copyright (c) 2005, 2010-2011, Wind River Systems
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of its
+ *    contributors may be used to endorse or promote products derived from
+ *    this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _LINUX_TIPC_H_
+#define _LINUX_TIPC_H_
+
+#include <linux/types.h>
+
+/*
+ * TIPC addressing primitives
+ */
+
+struct tipc_portid {
+	__u32 ref;
+	__u32 node;
+};
+
+struct tipc_name {
+	__u32 type;
+	__u32 instance;
+};
+
+struct tipc_name_seq {
+	__u32 type;
+	__u32 lower;
+	__u32 upper;
+};
+
+static inline __u32 tipc_addr(unsigned int zone,
+			      unsigned int cluster,
+			      unsigned int node)
+{
+	return (zone << 24) | (cluster << 12) | node;
+}
+
+static inline unsigned int tipc_zone(__u32 addr)
+{
+	return addr >> 24;
+}
+
+static inline unsigned int tipc_cluster(__u32 addr)
+{
+	return (addr >> 12) & 0xfff;
+}
+
+static inline unsigned int tipc_node(__u32 addr)
+{
+	return addr & 0xfff;
+}
+
+/*
+ * Application-accessible port name types
+ */
+
+#define TIPC_CFG_SRV		0	/* configuration service name type */
+#define TIPC_TOP_SRV		1	/* topology service name type */
+#define TIPC_RESERVED_TYPES	64	/* lowest user-publishable name type */
+
+/*
+ * Publication scopes when binding port names and port name sequences
+ */
+
+#define TIPC_ZONE_SCOPE		1
+#define TIPC_CLUSTER_SCOPE	2
+#define TIPC_NODE_SCOPE		3
+
+/*
+ * Limiting values for messages
+ */
+
+#define TIPC_MAX_USER_MSG_SIZE	66000U
+
+/*
+ * Message importance levels
+ */
+
+#define TIPC_LOW_IMPORTANCE		0
+#define TIPC_MEDIUM_IMPORTANCE		1
+#define TIPC_HIGH_IMPORTANCE		2
+#define TIPC_CRITICAL_IMPORTANCE	3
+
+/*
+ * Msg rejection/connection shutdown reasons
+ */
+
+#define TIPC_OK			0
+#define TIPC_ERR_NO_NAME	1
+#define TIPC_ERR_NO_PORT	2
+#define TIPC_ERR_NO_NODE	3
+#define TIPC_ERR_OVERLOAD	4
+#define TIPC_CONN_SHUTDOWN	5
+
+/*
+ * TIPC topology subscription service definitions
+ */
+
+#define TIPC_SUB_PORTS		0x01	/* filter for port availability */
+#define TIPC_SUB_SERVICE	0x02	/* filter for service availability */
+#define TIPC_SUB_CANCEL		0x04	/* cancel a subscription */
+
+#define TIPC_WAIT_FOREVER	(~0)	/* timeout for permanent subscription */
+
+struct tipc_subscr {
+	struct tipc_name_seq seq;	/* name sequence of interest */
+	__u32 timeout;			/* subscription duration (in ms) */
+	__u32 filter;			/* bitmask of filter options */
+	char usr_handle[8];		/* available for subscriber use */
+};
+
+#define TIPC_PUBLISHED		1	/* publication event */
+#define TIPC_WITHDRAWN		2	/* withdraw event */
+#define TIPC_SUBSCR_TIMEOUT	3	/* subscription timeout event */
+
+struct tipc_event {
+	__u32 event;			/* event type */
+	__u32 found_lower;		/* matching name seq instances */
+	__u32 found_upper;		/*    "      "    "     "      */
+	struct tipc_portid port;	/* associated port */
+	struct tipc_subscr s;		/* associated subscription */
+};
+
+/*
+ * Socket API
+ */
+
+#ifndef AF_TIPC
+#define AF_TIPC		30
+#endif
+
+#ifndef PF_TIPC
+#define PF_TIPC		AF_TIPC
+#endif
+
+#ifndef SOL_TIPC
+#define SOL_TIPC	271
+#endif
+
+#define TIPC_ADDR_NAMESEQ	1
+#define TIPC_ADDR_MCAST		1
+#define TIPC_ADDR_NAME		2
+#define TIPC_ADDR_ID		3
+
+struct sockaddr_tipc {
+	unsigned short family;
+	unsigned char  addrtype;
+	signed   char  scope;
+	union {
+		struct tipc_portid id;
+		struct tipc_name_seq nameseq;
+		struct {
+			struct tipc_name name;
+			__u32 domain;
+		} name;
+	} addr;
+};
+
+/*
+ * Ancillary data objects supported by recvmsg()
+ */
+
+#define TIPC_ERRINFO	1	/* error info */
+#define TIPC_RETDATA	2	/* returned data */
+#define TIPC_DESTNAME	3	/* destination name */
+
+/*
+ * TIPC-specific socket option values
+ */
+
+#define TIPC_IMPORTANCE		127	/* Default: TIPC_LOW_IMPORTANCE */
+#define TIPC_SRC_DROPPABLE	128	/* Default: based on socket type */
+#define TIPC_DEST_DROPPABLE	129	/* Default: based on socket type */
+#define TIPC_CONN_TIMEOUT	130	/* Default: 8000 (ms)  */
+#define TIPC_NODE_RECVQ_DEPTH	131	/* Default: none (read only) */
+#define TIPC_SOCK_RECVQ_DEPTH	132	/* Default: none (read only) */
+
+#endif
diff --git a/include/uapi/linux/tipc_config.h b/include/uapi/linux/tipc_config.h
new file mode 100644
index 00000000000..0b1e3f218a3
--- /dev/null
+++ b/include/uapi/linux/tipc_config.h
@@ -0,0 +1,395 @@
+/*
+ * include/linux/tipc_config.h: Include file for TIPC configuration interface
+ *
+ * Copyright (c) 2003-2006, Ericsson AB
+ * Copyright (c) 2005-2007, 2010-2011, Wind River Systems
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of its
+ *    contributors may be used to endorse or promote products derived from
+ *    this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _LINUX_TIPC_CONFIG_H_
+#define _LINUX_TIPC_CONFIG_H_
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <asm/byteorder.h>
+
+#ifndef __KERNEL__
+#include <arpa/inet.h> /* for ntohs etc. */
+#endif
+
+/*
+ * Configuration
+ *
+ * All configuration management messaging involves sending a request message
+ * to the TIPC configuration service on a node, which sends a reply message
+ * back.  (In the future multi-message replies may be supported.)
+ *
+ * Both request and reply messages consist of a transport header and payload.
+ * The transport header contains info about the desired operation;
+ * the payload consists of zero or more type/length/value (TLV) items
+ * which specify parameters or results for the operation.
+ *
+ * For many operations, the request and reply messages have a fixed number
+ * of TLVs (usually zero or one); however, some reply messages may return
+ * a variable number of TLVs.  A failed request is denoted by the presence
+ * of an "error string" TLV in the reply message instead of the TLV(s) the
+ * reply should contain if the request succeeds.
+ */
+
+/*
+ * Public commands:
+ * May be issued by any process.
+ * Accepted by own node, or by remote node only if remote management enabled.
+ */
+
+#define  TIPC_CMD_NOOP              0x0000    /* tx none, rx none */
+#define  TIPC_CMD_GET_NODES         0x0001    /* tx net_addr, rx node_info(s) */
+#define  TIPC_CMD_GET_MEDIA_NAMES   0x0002    /* tx none, rx media_name(s) */
+#define  TIPC_CMD_GET_BEARER_NAMES  0x0003    /* tx none, rx bearer_name(s) */
+#define  TIPC_CMD_GET_LINKS         0x0004    /* tx net_addr, rx link_info(s) */
+#define  TIPC_CMD_SHOW_NAME_TABLE   0x0005    /* tx name_tbl_query, rx ultra_string */
+#define  TIPC_CMD_SHOW_PORTS        0x0006    /* tx none, rx ultra_string */
+#define  TIPC_CMD_SHOW_LINK_STATS   0x000B    /* tx link_name, rx ultra_string */
+#define  TIPC_CMD_SHOW_STATS        0x000F    /* tx unsigned, rx ultra_string */
+
+/*
+ * Protected commands:
+ * May only be issued by "network administration capable" process.
+ * Accepted by own node, or by remote node only if remote management enabled
+ * and this node is zone manager.
+ */
+
+#define  TIPC_CMD_GET_REMOTE_MNG    0x4003    /* tx none, rx unsigned */
+#define  TIPC_CMD_GET_MAX_PORTS     0x4004    /* tx none, rx unsigned */
+#define  TIPC_CMD_GET_MAX_PUBL      0x4005    /* obsoleted */
+#define  TIPC_CMD_GET_MAX_SUBSCR    0x4006    /* obsoleted */
+#define  TIPC_CMD_GET_MAX_ZONES     0x4007    /* obsoleted */
+#define  TIPC_CMD_GET_MAX_CLUSTERS  0x4008    /* obsoleted */
+#define  TIPC_CMD_GET_MAX_NODES     0x4009    /* obsoleted */
+#define  TIPC_CMD_GET_MAX_SLAVES    0x400A    /* obsoleted */
+#define  TIPC_CMD_GET_NETID         0x400B    /* tx none, rx unsigned */
+
+#define  TIPC_CMD_ENABLE_BEARER     0x4101    /* tx bearer_config, rx none */
+#define  TIPC_CMD_DISABLE_BEARER    0x4102    /* tx bearer_name, rx none */
+#define  TIPC_CMD_SET_LINK_TOL      0x4107    /* tx link_config, rx none */
+#define  TIPC_CMD_SET_LINK_PRI      0x4108    /* tx link_config, rx none */
+#define  TIPC_CMD_SET_LINK_WINDOW   0x4109    /* tx link_config, rx none */
+#define  TIPC_CMD_SET_LOG_SIZE      0x410A    /* obsoleted */
+#define  TIPC_CMD_DUMP_LOG          0x410B    /* obsoleted */
+#define  TIPC_CMD_RESET_LINK_STATS  0x410C    /* tx link_name, rx none */
+
+/*
+ * Private commands:
+ * May only be issued by "network administration capable" process.
+ * Accepted by own node only; cannot be used on a remote node.
+ */
+
+#define  TIPC_CMD_SET_NODE_ADDR     0x8001    /* tx net_addr, rx none */
+#define  TIPC_CMD_SET_REMOTE_MNG    0x8003    /* tx unsigned, rx none */
+#define  TIPC_CMD_SET_MAX_PORTS     0x8004    /* tx unsigned, rx none */
+#define  TIPC_CMD_SET_MAX_PUBL      0x8005    /* obsoleted */
+#define  TIPC_CMD_SET_MAX_SUBSCR    0x8006    /* obsoleted */
+#define  TIPC_CMD_SET_MAX_ZONES     0x8007    /* obsoleted */
+#define  TIPC_CMD_SET_MAX_CLUSTERS  0x8008    /* obsoleted */
+#define  TIPC_CMD_SET_MAX_NODES     0x8009    /* obsoleted */
+#define  TIPC_CMD_SET_MAX_SLAVES    0x800A    /* obsoleted */
+#define  TIPC_CMD_SET_NETID         0x800B    /* tx unsigned, rx none */
+
+/*
+ * Reserved commands:
+ * May not be issued by any process.
+ * Used internally by TIPC.
+ */
+
+#define  TIPC_CMD_NOT_NET_ADMIN     0xC001    /* tx none, rx none */
+
+/*
+ * TLV types defined for TIPC
+ */
+
+#define TIPC_TLV_NONE		0	/* no TLV present */
+#define TIPC_TLV_VOID		1	/* empty TLV (0 data bytes)*/
+#define TIPC_TLV_UNSIGNED	2	/* 32-bit integer */
+#define TIPC_TLV_STRING		3	/* char[128] (max) */
+#define TIPC_TLV_LARGE_STRING	4	/* char[2048] (max) */
+#define TIPC_TLV_ULTRA_STRING	5	/* char[32768] (max) */
+
+#define TIPC_TLV_ERROR_STRING	16	/* char[128] containing "error code" */
+#define TIPC_TLV_NET_ADDR	17	/* 32-bit integer denoting <Z.C.N> */
+#define TIPC_TLV_MEDIA_NAME	18	/* char[TIPC_MAX_MEDIA_NAME] */
+#define TIPC_TLV_BEARER_NAME	19	/* char[TIPC_MAX_BEARER_NAME] */
+#define TIPC_TLV_LINK_NAME	20	/* char[TIPC_MAX_LINK_NAME] */
+#define TIPC_TLV_NODE_INFO	21	/* struct tipc_node_info */
+#define TIPC_TLV_LINK_INFO	22	/* struct tipc_link_info */
+#define TIPC_TLV_BEARER_CONFIG	23	/* struct tipc_bearer_config */
+#define TIPC_TLV_LINK_CONFIG	24	/* struct tipc_link_config */
+#define TIPC_TLV_NAME_TBL_QUERY	25	/* struct tipc_name_table_query */
+#define TIPC_TLV_PORT_REF	26	/* 32-bit port reference */
+
+/*
+ * Maximum sizes of TIPC bearer-related names (including terminating NUL)
+ */
+
+#define TIPC_MAX_MEDIA_NAME	16	/* format = media */
+#define TIPC_MAX_IF_NAME	16	/* format = interface */
+#define TIPC_MAX_BEARER_NAME	32	/* format = media:interface */
+#define TIPC_MAX_LINK_NAME	60	/* format = Z.C.N:interface-Z.C.N:interface */
+
+/*
+ * Link priority limits (min, default, max, media default)
+ */
+
+#define TIPC_MIN_LINK_PRI	0
+#define TIPC_DEF_LINK_PRI	10
+#define TIPC_MAX_LINK_PRI	31
+#define TIPC_MEDIA_LINK_PRI	(TIPC_MAX_LINK_PRI + 1)
+
+/*
+ * Link tolerance limits (min, default, max), in ms
+ */
+
+#define TIPC_MIN_LINK_TOL 50
+#define TIPC_DEF_LINK_TOL 1500
+#define TIPC_MAX_LINK_TOL 30000
+
+#if (TIPC_MIN_LINK_TOL < 16)
+#error "TIPC_MIN_LINK_TOL is too small (abort limit may be NaN)"
+#endif
+
+/*
+ * Link window limits (min, default, max), in packets
+ */
+
+#define TIPC_MIN_LINK_WIN 16
+#define TIPC_DEF_LINK_WIN 50
+#define TIPC_MAX_LINK_WIN 150
+
+
+struct tipc_node_info {
+	__be32 addr;			/* network address of node */
+	__be32 up;			/* 0=down, 1= up */
+};
+
+struct tipc_link_info {
+	__be32 dest;			/* network address of peer node */
+	__be32 up;			/* 0=down, 1=up */
+	char str[TIPC_MAX_LINK_NAME];	/* link name */
+};
+
+struct tipc_bearer_config {
+	__be32 priority;		/* Range [1,31]. Override per link  */
+	__be32 disc_domain;		/* <Z.C.N> describing desired nodes */
+	char name[TIPC_MAX_BEARER_NAME];
+};
+
+struct tipc_link_config {
+	__be32 value;
+	char name[TIPC_MAX_LINK_NAME];
+};
+
+#define TIPC_NTQ_ALLTYPES 0x80000000
+
+struct tipc_name_table_query {
+	__be32 depth;	/* 1:type, 2:+name info, 3:+port info, 4+:+debug info */
+	__be32 type;	/* {t,l,u} info ignored if high bit of "depth" is set */
+	__be32 lowbound; /* (i.e. displays all entries of name table) */
+	__be32 upbound;
+};
+
+/*
+ * The error string TLV is a null-terminated string describing the cause
+ * of the request failure.  To simplify error processing (and to save space)
+ * the first character of the string can be a special error code character
+ * (lying by the range 0x80 to 0xFF) which represents a pre-defined reason.
+ */
+
+#define TIPC_CFG_TLV_ERROR      "\x80"  /* request contains incorrect TLV(s) */
+#define TIPC_CFG_NOT_NET_ADMIN  "\x81"	/* must be network administrator */
+#define TIPC_CFG_NOT_ZONE_MSTR	"\x82"	/* must be zone master */
+#define TIPC_CFG_NO_REMOTE	"\x83"	/* remote management not enabled */
+#define TIPC_CFG_NOT_SUPPORTED  "\x84"	/* request is not supported by TIPC */
+#define TIPC_CFG_INVALID_VALUE  "\x85"  /* request has invalid argument value */
+
+/*
+ * A TLV consists of a descriptor, followed by the TLV value.
+ * TLV descriptor fields are stored in network byte order;
+ * TLV values must also be stored in network byte order (where applicable).
+ * TLV descriptors must be aligned to addresses which are multiple of 4,
+ * so up to 3 bytes of padding may exist at the end of the TLV value area.
+ * There must not be any padding between the TLV descriptor and its value.
+ */
+
+struct tlv_desc {
+	__be16 tlv_len;		/* TLV length (descriptor + value) */
+	__be16 tlv_type;		/* TLV identifier */
+};
+
+#define TLV_ALIGNTO 4
+
+#define TLV_ALIGN(datalen) (((datalen)+(TLV_ALIGNTO-1)) & ~(TLV_ALIGNTO-1))
+#define TLV_LENGTH(datalen) (sizeof(struct tlv_desc) + (datalen))
+#define TLV_SPACE(datalen) (TLV_ALIGN(TLV_LENGTH(datalen)))
+#define TLV_DATA(tlv) ((void *)((char *)(tlv) + TLV_LENGTH(0)))
+
+static inline int TLV_OK(const void *tlv, __u16 space)
+{
+	/*
+	 * Would also like to check that "tlv" is a multiple of 4,
+	 * but don't know how to do this in a portable way.
+	 * - Tried doing (!(tlv & (TLV_ALIGNTO-1))), but GCC compiler
+	 *   won't allow binary "&" with a pointer.
+	 * - Tried casting "tlv" to integer type, but causes warning about size
+	 *   mismatch when pointer is bigger than chosen type (int, long, ...).
+	 */
+
+	return (space >= TLV_SPACE(0)) &&
+		(ntohs(((struct tlv_desc *)tlv)->tlv_len) <= space);
+}
+
+static inline int TLV_CHECK(const void *tlv, __u16 space, __u16 exp_type)
+{
+	return TLV_OK(tlv, space) &&
+		(ntohs(((struct tlv_desc *)tlv)->tlv_type) == exp_type);
+}
+
+static inline int TLV_SET(void *tlv, __u16 type, void *data, __u16 len)
+{
+	struct tlv_desc *tlv_ptr;
+	int tlv_len;
+
+	tlv_len = TLV_LENGTH(len);
+	tlv_ptr = (struct tlv_desc *)tlv;
+	tlv_ptr->tlv_type = htons(type);
+	tlv_ptr->tlv_len  = htons(tlv_len);
+	if (len && data)
+		memcpy(TLV_DATA(tlv_ptr), data, tlv_len);
+	return TLV_SPACE(len);
+}
+
+/*
+ * A TLV list descriptor simplifies processing of messages
+ * containing multiple TLVs.
+ */
+
+struct tlv_list_desc {
+	struct tlv_desc *tlv_ptr;	/* ptr to current TLV */
+	__u32 tlv_space;		/* # bytes from curr TLV to list end */
+};
+
+static inline void TLV_LIST_INIT(struct tlv_list_desc *list,
+				 void *data, __u32 space)
+{
+	list->tlv_ptr = (struct tlv_desc *)data;
+	list->tlv_space = space;
+}
+
+static inline int TLV_LIST_EMPTY(struct tlv_list_desc *list)
+{
+	return (list->tlv_space == 0);
+}
+
+static inline int TLV_LIST_CHECK(struct tlv_list_desc *list, __u16 exp_type)
+{
+	return TLV_CHECK(list->tlv_ptr, list->tlv_space, exp_type);
+}
+
+static inline void *TLV_LIST_DATA(struct tlv_list_desc *list)
+{
+	return TLV_DATA(list->tlv_ptr);
+}
+
+static inline void TLV_LIST_STEP(struct tlv_list_desc *list)
+{
+	__u16 tlv_space = TLV_ALIGN(ntohs(list->tlv_ptr->tlv_len));
+
+	list->tlv_ptr = (struct tlv_desc *)((char *)list->tlv_ptr + tlv_space);
+	list->tlv_space -= tlv_space;
+}
+
+/*
+ * Configuration messages exchanged via NETLINK_GENERIC use the following
+ * family id, name, version and command.
+ */
+#define TIPC_GENL_NAME		"TIPC"
+#define TIPC_GENL_VERSION	0x1
+#define TIPC_GENL_CMD		0x1
+
+/*
+ * TIPC specific header used in NETLINK_GENERIC requests.
+ */
+struct tipc_genlmsghdr {
+	__u32 dest;		/* Destination address */
+	__u16 cmd;		/* Command */
+	__u16 reserved;		/* Unused */
+};
+
+#define TIPC_GENL_HDRLEN	NLMSG_ALIGN(sizeof(struct tipc_genlmsghdr))
+
+/*
+ * Configuration messages exchanged via TIPC sockets use the TIPC configuration
+ * message header, which is defined below.  This structure is analogous
+ * to the Netlink message header, but fields are stored in network byte order
+ * and no padding is permitted between the header and the message data
+ * that follows.
+ */
+
+struct tipc_cfg_msg_hdr {
+	__be32 tcm_len;		/* Message length (including header) */
+	__be16 tcm_type;	/* Command type */
+	__be16 tcm_flags;	/* Additional flags */
+	char  tcm_reserved[8];	/* Unused */
+};
+
+#define TCM_F_REQUEST	0x1	/* Flag: Request message */
+#define TCM_F_MORE	0x2	/* Flag: Message to be continued */
+
+#define TCM_ALIGN(datalen)  (((datalen)+3) & ~3)
+#define TCM_LENGTH(datalen) (sizeof(struct tipc_cfg_msg_hdr) + datalen)
+#define TCM_SPACE(datalen)  (TCM_ALIGN(TCM_LENGTH(datalen)))
+#define TCM_DATA(tcm_hdr)   ((void *)((char *)(tcm_hdr) + TCM_LENGTH(0)))
+
+static inline int TCM_SET(void *msg, __u16 cmd, __u16 flags,
+			  void *data, __u16 data_len)
+{
+	struct tipc_cfg_msg_hdr *tcm_hdr;
+	int msg_len;
+
+	msg_len = TCM_LENGTH(data_len);
+	tcm_hdr = (struct tipc_cfg_msg_hdr *)msg;
+	tcm_hdr->tcm_len   = htonl(msg_len);
+	tcm_hdr->tcm_type  = htons(cmd);
+	tcm_hdr->tcm_flags = htons(flags);
+	if (data_len && data)
+		memcpy(TCM_DATA(msg), data, data_len);
+	return TCM_SPACE(data_len);
+}
+
+#endif
diff --git a/include/uapi/linux/toshiba.h b/include/uapi/linux/toshiba.h
new file mode 100644
index 00000000000..e9bef5b2f91
--- /dev/null
+++ b/include/uapi/linux/toshiba.h
@@ -0,0 +1,37 @@
+/* toshiba.h -- Linux driver for accessing the SMM on Toshiba laptops 
+ *
+ * Copyright (c) 1996-2000  Jonathan A. Buzzard (jonathan@buzzard.org.uk)
+ *
+ * Thanks to Juergen Heinzl <juergen@monocerus.demon.co.uk> for the pointers
+ * on making sure the structure is aligned and packed.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#ifndef _UAPI_LINUX_TOSHIBA_H
+#define _UAPI_LINUX_TOSHIBA_H
+
+#define TOSH_PROC "/proc/toshiba"
+#define TOSH_DEVICE "/dev/toshiba"
+#define TOSH_SMM _IOWR('t', 0x90, int)	/* broken: meant 24 bytes */
+
+typedef struct {
+	unsigned int eax;
+	unsigned int ebx __attribute__ ((packed));
+	unsigned int ecx __attribute__ ((packed));
+	unsigned int edx __attribute__ ((packed));
+	unsigned int esi __attribute__ ((packed));
+	unsigned int edi __attribute__ ((packed));
+} SMMRegisters;
+
+
+#endif /* _UAPI_LINUX_TOSHIBA_H */
diff --git a/include/uapi/linux/tty.h b/include/uapi/linux/tty.h
new file mode 100644
index 00000000000..dac199a2dba
--- /dev/null
+++ b/include/uapi/linux/tty.h
@@ -0,0 +1,38 @@
+#ifndef _UAPI_LINUX_TTY_H
+#define _UAPI_LINUX_TTY_H
+
+/*
+ * 'tty.h' defines some structures used by tty_io.c and some defines.
+ */
+
+#define NR_LDISCS		30
+
+/* line disciplines */
+#define N_TTY		0
+#define N_SLIP		1
+#define N_MOUSE		2
+#define N_PPP		3
+#define N_STRIP		4
+#define N_AX25		5
+#define N_X25		6	/* X.25 async */
+#define N_6PACK		7
+#define N_MASC		8	/* Reserved for Mobitex module <kaz@cafe.net> */
+#define N_R3964		9	/* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL	10	/* Reserved for Profibus */
+#define N_IRDA		11	/* Linux IrDa - http://irda.sourceforge.net/ */
+#define N_SMSBLOCK	12	/* SMS block mode - for talking to GSM data */
+				/* cards about SMS messages */
+#define N_HDLC		13	/* synchronous HDLC */
+#define N_SYNC_PPP	14	/* synchronous PPP */
+#define N_HCI		15	/* Bluetooth HCI UART */
+#define N_GIGASET_M101	16	/* Siemens Gigaset M101 serial DECT adapter */
+#define N_SLCAN		17	/* Serial / USB serial CAN Adaptors */
+#define N_PPS		18	/* Pulse per Second */
+#define N_V253		19	/* Codec control over voice modem */
+#define N_CAIF		20      /* CAIF protocol for talking to modems */
+#define N_GSM0710	21	/* GSM 0710 Mux */
+#define N_TI_WL		22	/* for TI's WL BT, FM, GPS combo chips */
+#define N_TRACESINK	23	/* Trace data routing for MIPI P1149.7 */
+#define N_TRACEROUTER	24	/* Trace data routing for MIPI P1149.7 */
+
+#endif /* _UAPI_LINUX_TTY_H */
diff --git a/include/uapi/linux/tty_flags.h b/include/uapi/linux/tty_flags.h
new file mode 100644
index 00000000000..eefcb483a2c
--- /dev/null
+++ b/include/uapi/linux/tty_flags.h
@@ -0,0 +1,78 @@
+#ifndef _LINUX_TTY_FLAGS_H
+#define _LINUX_TTY_FLAGS_H
+
+/*
+ * Definitions for async_struct (and serial_struct) flags field also
+ * shared by the tty_port flags structures.
+ *
+ * Define ASYNCB_* for convenient use with {test,set,clear}_bit.
+ */
+#define ASYNCB_HUP_NOTIFY	 0 /* Notify getty on hangups and closes
+				    * on the callout port */
+#define ASYNCB_FOURPORT		 1 /* Set OU1, OUT2 per AST Fourport settings */
+#define ASYNCB_SAK		 2 /* Secure Attention Key (Orange book) */
+#define ASYNCB_SPLIT_TERMIOS	 3 /* Separate termios for dialin/callout */
+#define ASYNCB_SPD_HI		 4 /* Use 56000 instead of 38400 bps */
+#define ASYNCB_SPD_VHI		 5 /* Use 115200 instead of 38400 bps */
+#define ASYNCB_SKIP_TEST	 6 /* Skip UART test during autoconfiguration */
+#define ASYNCB_AUTO_IRQ		 7 /* Do automatic IRQ during
+				    * autoconfiguration */
+#define ASYNCB_SESSION_LOCKOUT	 8 /* Lock out cua opens based on session */
+#define ASYNCB_PGRP_LOCKOUT	 9 /* Lock out cua opens based on pgrp */
+#define ASYNCB_CALLOUT_NOHUP	10 /* Don't do hangups for cua device */
+#define ASYNCB_HARDPPS_CD	11 /* Call hardpps when CD goes high  */
+#define ASYNCB_SPD_SHI		12 /* Use 230400 instead of 38400 bps */
+#define ASYNCB_LOW_LATENCY	13 /* Request low latency behaviour */
+#define ASYNCB_BUGGY_UART	14 /* This is a buggy UART, skip some safety
+				    * checks.  Note: can be dangerous! */
+#define ASYNCB_AUTOPROBE	15 /* Port was autoprobed by PCI or PNP code */
+#define ASYNCB_LAST_USER	15
+
+/* Internal flags used only by kernel */
+#define ASYNCB_INITIALIZED	31 /* Serial port was initialized */
+#define ASYNCB_SUSPENDED	30 /* Serial port is suspended */
+#define ASYNCB_NORMAL_ACTIVE	29 /* Normal device is active */
+#define ASYNCB_BOOT_AUTOCONF	28 /* Autoconfigure port on bootup */
+#define ASYNCB_CLOSING		27 /* Serial port is closing */
+#define ASYNCB_CTS_FLOW		26 /* Do CTS flow control */
+#define ASYNCB_CHECK_CD		25 /* i.e., CLOCAL */
+#define ASYNCB_SHARE_IRQ	24 /* for multifunction cards, no longer used */
+#define ASYNCB_CONS_FLOW	23 /* flow control for console  */
+#define ASYNCB_FIRST_KERNEL	22
+
+#define ASYNC_HUP_NOTIFY	(1U << ASYNCB_HUP_NOTIFY)
+#define ASYNC_SUSPENDED		(1U << ASYNCB_SUSPENDED)
+#define ASYNC_FOURPORT		(1U << ASYNCB_FOURPORT)
+#define ASYNC_SAK		(1U << ASYNCB_SAK)
+#define ASYNC_SPLIT_TERMIOS	(1U << ASYNCB_SPLIT_TERMIOS)
+#define ASYNC_SPD_HI		(1U << ASYNCB_SPD_HI)
+#define ASYNC_SPD_VHI		(1U << ASYNCB_SPD_VHI)
+#define ASYNC_SKIP_TEST		(1U << ASYNCB_SKIP_TEST)
+#define ASYNC_AUTO_IRQ		(1U << ASYNCB_AUTO_IRQ)
+#define ASYNC_SESSION_LOCKOUT	(1U << ASYNCB_SESSION_LOCKOUT)
+#define ASYNC_PGRP_LOCKOUT	(1U << ASYNCB_PGRP_LOCKOUT)
+#define ASYNC_CALLOUT_NOHUP	(1U << ASYNCB_CALLOUT_NOHUP)
+#define ASYNC_HARDPPS_CD	(1U << ASYNCB_HARDPPS_CD)
+#define ASYNC_SPD_SHI		(1U << ASYNCB_SPD_SHI)
+#define ASYNC_LOW_LATENCY	(1U << ASYNCB_LOW_LATENCY)
+#define ASYNC_BUGGY_UART	(1U << ASYNCB_BUGGY_UART)
+#define ASYNC_AUTOPROBE		(1U << ASYNCB_AUTOPROBE)
+
+#define ASYNC_FLAGS		((1U << (ASYNCB_LAST_USER + 1)) - 1)
+#define ASYNC_USR_MASK		(ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \
+		ASYNC_LOW_LATENCY)
+#define ASYNC_SPD_CUST		(ASYNC_SPD_HI|ASYNC_SPD_VHI)
+#define ASYNC_SPD_WARP		(ASYNC_SPD_HI|ASYNC_SPD_SHI)
+#define ASYNC_SPD_MASK		(ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
+
+#define ASYNC_INITIALIZED	(1U << ASYNCB_INITIALIZED)
+#define ASYNC_NORMAL_ACTIVE	(1U << ASYNCB_NORMAL_ACTIVE)
+#define ASYNC_BOOT_AUTOCONF	(1U << ASYNCB_BOOT_AUTOCONF)
+#define ASYNC_CLOSING		(1U << ASYNCB_CLOSING)
+#define ASYNC_CTS_FLOW		(1U << ASYNCB_CTS_FLOW)
+#define ASYNC_CHECK_CD		(1U << ASYNCB_CHECK_CD)
+#define ASYNC_SHARE_IRQ		(1U << ASYNCB_SHARE_IRQ)
+#define ASYNC_CONS_FLOW		(1U << ASYNCB_CONS_FLOW)
+#define ASYNC_INTERNAL_FLAGS	(~((1U << ASYNCB_FIRST_KERNEL) - 1))
+
+#endif
diff --git a/include/uapi/linux/types.h b/include/uapi/linux/types.h
new file mode 100644
index 00000000000..acf0979b790
--- /dev/null
+++ b/include/uapi/linux/types.h
@@ -0,0 +1,56 @@
+#ifndef _UAPI_LINUX_TYPES_H
+#define _UAPI_LINUX_TYPES_H
+
+#include <asm/types.h>
+
+#ifndef __ASSEMBLY__
+#ifndef	__KERNEL__
+#ifndef __EXPORTED_HEADERS__
+#warning "Attempt to use kernel headers from user space, see http://kernelnewbies.org/KernelHeaders"
+#endif /* __EXPORTED_HEADERS__ */
+#endif
+
+#include <linux/posix_types.h>
+
+
+/*
+ * Below are truly Linux-specific types that should never collide with
+ * any application/library that wants linux/types.h.
+ */
+
+#ifdef __CHECKER__
+#define __bitwise__ __attribute__((bitwise))
+#else
+#define __bitwise__
+#endif
+#ifdef __CHECK_ENDIAN__
+#define __bitwise __bitwise__
+#else
+#define __bitwise
+#endif
+
+typedef __u16 __bitwise __le16;
+typedef __u16 __bitwise __be16;
+typedef __u32 __bitwise __le32;
+typedef __u32 __bitwise __be32;
+typedef __u64 __bitwise __le64;
+typedef __u64 __bitwise __be64;
+
+typedef __u16 __bitwise __sum16;
+typedef __u32 __bitwise __wsum;
+
+/*
+ * aligned_u64 should be used in defining kernel<->userspace ABIs to avoid
+ * common 32/64-bit compat problems.
+ * 64-bit values align to 4-byte boundaries on x86_32 (and possibly other
+ * architectures) and to 8-byte boundaries on 64-bit architectures.  The new
+ * aligned_64 type enforces 8-byte alignment so that structs containing
+ * aligned_64 values have the same alignment on 32-bit and 64-bit architectures.
+ * No conversions are necessary between 32-bit user-space and a 64-bit kernel.
+ */
+#define __aligned_u64 __u64 __attribute__((aligned(8)))
+#define __aligned_be64 __be64 __attribute__((aligned(8)))
+#define __aligned_le64 __le64 __attribute__((aligned(8)))
+
+#endif /*  __ASSEMBLY__ */
+#endif /* _UAPI_LINUX_TYPES_H */
diff --git a/include/uapi/linux/udf_fs_i.h b/include/uapi/linux/udf_fs_i.h
new file mode 100644
index 00000000000..3536965913b
--- /dev/null
+++ b/include/uapi/linux/udf_fs_i.h
@@ -0,0 +1,21 @@
+/*
+ * udf_fs_i.h
+ *
+ * This file is intended for the Linux kernel/module. 
+ *
+ * COPYRIGHT
+ *	This file is distributed under the terms of the GNU General Public
+ *	License (GPL). Copies of the GPL can be obtained from:
+ *		ftp://prep.ai.mit.edu/pub/gnu/GPL
+ *	Each contributing author retains all rights to their own work.
+ */
+#ifndef _UDF_FS_I_H
+#define _UDF_FS_I_H 1
+
+/* exported IOCTLs, we have 'l', 0x40-0x7f */
+#define UDF_GETEASIZE   _IOR('l', 0x40, int)
+#define UDF_GETEABLOCK  _IOR('l', 0x41, void *)
+#define UDF_GETVOLIDENT _IOR('l', 0x42, void *)
+#define UDF_RELOCATE_BLOCKS _IOWR('l', 0x43, long)
+
+#endif /* _UDF_FS_I_H */
diff --git a/include/uapi/linux/udp.h b/include/uapi/linux/udp.h
new file mode 100644
index 00000000000..e2bcfd75a30
--- /dev/null
+++ b/include/uapi/linux/udp.h
@@ -0,0 +1,39 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the UDP protocol.
+ *
+ * Version:	@(#)udp.h	1.0.2	04/28/93
+ *
+ * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_LINUX_UDP_H
+#define _UAPI_LINUX_UDP_H
+
+#include <linux/types.h>
+
+struct udphdr {
+	__be16	source;
+	__be16	dest;
+	__be16	len;
+	__sum16	check;
+};
+
+/* UDP socket options */
+#define UDP_CORK	1	/* Never send partially complete segments */
+#define UDP_ENCAP	100	/* Set the socket to accept encapsulated packets */
+
+/* UDP encapsulation types */
+#define UDP_ENCAP_ESPINUDP_NON_IKE	1 /* draft-ietf-ipsec-nat-t-ike-00/01 */
+#define UDP_ENCAP_ESPINUDP	2 /* draft-ietf-ipsec-udp-encaps-06 */
+#define UDP_ENCAP_L2TPINUDP	3 /* rfc2661 */
+
+
+#endif /* _UAPI_LINUX_UDP_H */
diff --git a/include/uapi/linux/uhid.h b/include/uapi/linux/uhid.h
new file mode 100644
index 00000000000..9c6974f1696
--- /dev/null
+++ b/include/uapi/linux/uhid.h
@@ -0,0 +1,104 @@
+#ifndef __UHID_H_
+#define __UHID_H_
+
+/*
+ * User-space I/O driver support for HID subsystem
+ * Copyright (c) 2012 David Herrmann
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+/*
+ * Public header for user-space communication. We try to keep every structure
+ * aligned but to be safe we also use __attribute__((__packed__)). Therefore,
+ * the communication should be ABI compatible even between architectures.
+ */
+
+#include <linux/input.h>
+#include <linux/types.h>
+
+enum uhid_event_type {
+	UHID_CREATE,
+	UHID_DESTROY,
+	UHID_START,
+	UHID_STOP,
+	UHID_OPEN,
+	UHID_CLOSE,
+	UHID_OUTPUT,
+	UHID_OUTPUT_EV,
+	UHID_INPUT,
+	UHID_FEATURE,
+	UHID_FEATURE_ANSWER,
+};
+
+struct uhid_create_req {
+	__u8 name[128];
+	__u8 phys[64];
+	__u8 uniq[64];
+	__u8 __user *rd_data;
+	__u16 rd_size;
+
+	__u16 bus;
+	__u32 vendor;
+	__u32 product;
+	__u32 version;
+	__u32 country;
+} __attribute__((__packed__));
+
+#define UHID_DATA_MAX 4096
+
+enum uhid_report_type {
+	UHID_FEATURE_REPORT,
+	UHID_OUTPUT_REPORT,
+	UHID_INPUT_REPORT,
+};
+
+struct uhid_input_req {
+	__u8 data[UHID_DATA_MAX];
+	__u16 size;
+} __attribute__((__packed__));
+
+struct uhid_output_req {
+	__u8 data[UHID_DATA_MAX];
+	__u16 size;
+	__u8 rtype;
+} __attribute__((__packed__));
+
+struct uhid_output_ev_req {
+	__u16 type;
+	__u16 code;
+	__s32 value;
+} __attribute__((__packed__));
+
+struct uhid_feature_req {
+	__u32 id;
+	__u8 rnum;
+	__u8 rtype;
+} __attribute__((__packed__));
+
+struct uhid_feature_answer_req {
+	__u32 id;
+	__u16 err;
+	__u16 size;
+	__u8 data[UHID_DATA_MAX];
+};
+
+struct uhid_event {
+	__u32 type;
+
+	union {
+		struct uhid_create_req create;
+		struct uhid_input_req input;
+		struct uhid_output_req output;
+		struct uhid_output_ev_req output_ev;
+		struct uhid_feature_req feature;
+		struct uhid_feature_answer_req feature_answer;
+	} u;
+} __attribute__((__packed__));
+
+#endif /* __UHID_H_ */
diff --git a/include/uapi/linux/uinput.h b/include/uapi/linux/uinput.h
new file mode 100644
index 00000000000..fe46431593f
--- /dev/null
+++ b/include/uapi/linux/uinput.h
@@ -0,0 +1,137 @@
+/*
+ *  User level driver support for input subsystem
+ *
+ * Heavily based on evdev.c by Vojtech Pavlik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org>
+ *
+ * Changes/Revisions:
+ *	0.3	24/05/2006 (Anssi Hannula <anssi.hannulagmail.com>)
+ *		- update ff support for the changes in kernel interface
+ *		- add UINPUT_VERSION
+ *	0.2	16/10/2004 (Micah Dowty <micah@navi.cx>)
+ *		- added force feedback support
+ *             - added UI_SET_PHYS
+ *	0.1	20/06/2002
+ *		- first public version
+ */
+#ifndef _UAPI__UINPUT_H_
+#define _UAPI__UINPUT_H_
+
+#include <linux/types.h>
+#include <linux/input.h>
+
+#define UINPUT_VERSION		3
+
+
+struct uinput_ff_upload {
+	__u32			request_id;
+	__s32			retval;
+	struct ff_effect	effect;
+	struct ff_effect	old;
+};
+
+struct uinput_ff_erase {
+	__u32			request_id;
+	__s32			retval;
+	__u32			effect_id;
+};
+
+/* ioctl */
+#define UINPUT_IOCTL_BASE	'U'
+#define UI_DEV_CREATE		_IO(UINPUT_IOCTL_BASE, 1)
+#define UI_DEV_DESTROY		_IO(UINPUT_IOCTL_BASE, 2)
+
+#define UI_SET_EVBIT		_IOW(UINPUT_IOCTL_BASE, 100, int)
+#define UI_SET_KEYBIT		_IOW(UINPUT_IOCTL_BASE, 101, int)
+#define UI_SET_RELBIT		_IOW(UINPUT_IOCTL_BASE, 102, int)
+#define UI_SET_ABSBIT		_IOW(UINPUT_IOCTL_BASE, 103, int)
+#define UI_SET_MSCBIT		_IOW(UINPUT_IOCTL_BASE, 104, int)
+#define UI_SET_LEDBIT		_IOW(UINPUT_IOCTL_BASE, 105, int)
+#define UI_SET_SNDBIT		_IOW(UINPUT_IOCTL_BASE, 106, int)
+#define UI_SET_FFBIT		_IOW(UINPUT_IOCTL_BASE, 107, int)
+#define UI_SET_PHYS		_IOW(UINPUT_IOCTL_BASE, 108, char*)
+#define UI_SET_SWBIT		_IOW(UINPUT_IOCTL_BASE, 109, int)
+#define UI_SET_PROPBIT		_IOW(UINPUT_IOCTL_BASE, 110, int)
+
+#define UI_BEGIN_FF_UPLOAD	_IOWR(UINPUT_IOCTL_BASE, 200, struct uinput_ff_upload)
+#define UI_END_FF_UPLOAD	_IOW(UINPUT_IOCTL_BASE, 201, struct uinput_ff_upload)
+#define UI_BEGIN_FF_ERASE	_IOWR(UINPUT_IOCTL_BASE, 202, struct uinput_ff_erase)
+#define UI_END_FF_ERASE		_IOW(UINPUT_IOCTL_BASE, 203, struct uinput_ff_erase)
+
+/*
+ * To write a force-feedback-capable driver, the upload_effect
+ * and erase_effect callbacks in input_dev must be implemented.
+ * The uinput driver will generate a fake input event when one of
+ * these callbacks are invoked. The userspace code then uses
+ * ioctls to retrieve additional parameters and send the return code.
+ * The callback blocks until this return code is sent.
+ *
+ * The described callback mechanism is only used if ff_effects_max
+ * is set.
+ *
+ * To implement upload_effect():
+ *   1. Wait for an event with type == EV_UINPUT and code == UI_FF_UPLOAD.
+ *      A request ID will be given in 'value'.
+ *   2. Allocate a uinput_ff_upload struct, fill in request_id with
+ *      the 'value' from the EV_UINPUT event.
+ *   3. Issue a UI_BEGIN_FF_UPLOAD ioctl, giving it the
+ *      uinput_ff_upload struct. It will be filled in with the
+ *      ff_effects passed to upload_effect().
+ *   4. Perform the effect upload, and place a return code back into
+        the uinput_ff_upload struct.
+ *   5. Issue a UI_END_FF_UPLOAD ioctl, also giving it the
+ *      uinput_ff_upload_effect struct. This will complete execution
+ *      of our upload_effect() handler.
+ *
+ * To implement erase_effect():
+ *   1. Wait for an event with type == EV_UINPUT and code == UI_FF_ERASE.
+ *      A request ID will be given in 'value'.
+ *   2. Allocate a uinput_ff_erase struct, fill in request_id with
+ *      the 'value' from the EV_UINPUT event.
+ *   3. Issue a UI_BEGIN_FF_ERASE ioctl, giving it the
+ *      uinput_ff_erase struct. It will be filled in with the
+ *      effect ID passed to erase_effect().
+ *   4. Perform the effect erasure, and place a return code back
+ *      into the uinput_ff_erase struct.
+ *   5. Issue a UI_END_FF_ERASE ioctl, also giving it the
+ *      uinput_ff_erase_effect struct. This will complete execution
+ *      of our erase_effect() handler.
+ */
+
+/*
+ * This is the new event type, used only by uinput.
+ * 'code' is UI_FF_UPLOAD or UI_FF_ERASE, and 'value'
+ * is the unique request ID. This number was picked
+ * arbitrarily, above EV_MAX (since the input system
+ * never sees it) but in the range of a 16-bit int.
+ */
+#define EV_UINPUT		0x0101
+#define UI_FF_UPLOAD		1
+#define UI_FF_ERASE		2
+
+#define UINPUT_MAX_NAME_SIZE	80
+struct uinput_user_dev {
+	char name[UINPUT_MAX_NAME_SIZE];
+	struct input_id id;
+	__u32 ff_effects_max;
+	__s32 absmax[ABS_CNT];
+	__s32 absmin[ABS_CNT];
+	__s32 absfuzz[ABS_CNT];
+	__s32 absflat[ABS_CNT];
+};
+#endif /* _UAPI__UINPUT_H_ */
diff --git a/include/uapi/linux/uio.h b/include/uapi/linux/uio.h
new file mode 100644
index 00000000000..2731d56a548
--- /dev/null
+++ b/include/uapi/linux/uio.h
@@ -0,0 +1,30 @@
+/*
+ *	Berkeley style UIO structures	-	Alan Cox 1994.
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI__LINUX_UIO_H
+#define _UAPI__LINUX_UIO_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+
+struct iovec
+{
+	void __user *iov_base;	/* BSD uses caddr_t (1003.1g requires void *) */
+	__kernel_size_t iov_len; /* Must be size_t (1003.1g) */
+};
+
+/*
+ *	UIO_MAXIOV shall be at least 16 1003.1g (5.4.1.1)
+ */
+ 
+#define UIO_FASTIOV	8
+#define UIO_MAXIOV	1024
+
+
+#endif /* _UAPI__LINUX_UIO_H */
diff --git a/include/uapi/linux/ultrasound.h b/include/uapi/linux/ultrasound.h
new file mode 100644
index 00000000000..71339dc531c
--- /dev/null
+++ b/include/uapi/linux/ultrasound.h
@@ -0,0 +1,103 @@
+#ifndef _ULTRASOUND_H_
+#define _ULTRASOUND_H_
+/*
+ *	ultrasound.h - Macros for programming the Gravis Ultrasound
+ *			These macros are extremely device dependent
+ *			and not portable.
+ */
+/*
+ * Copyright (C) by Hannu Savolainen 1993-1997
+ *
+ * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
+ * Version 2 (June 1991). See the "COPYING" file distributed with this software
+ * for more info.
+ */
+
+
+/*
+ *	Private events for Gravis Ultrasound (GUS)
+ *
+ *	Format:
+ *		byte 0 		- SEQ_PRIVATE (0xfe)
+ *		byte 1 		- Synthesizer device number (0-N)
+ *		byte 2 		- Command (see below)
+ *		byte 3 		- Voice number (0-31)
+ *		bytes 4 and 5	- parameter P1 (unsigned short)
+ *		bytes 6 and 7	- parameter P2 (unsigned short)
+ *
+ *	Commands:
+ *		Each command affects one voice defined in byte 3.
+ *		Unused parameters (P1 and/or P2 *MUST* be initialized to zero).
+ *		_GUS_NUMVOICES	- Sets max. number of concurrent voices (P1=14-31, default 16)
+ *		_GUS_VOICESAMPLE- ************ OBSOLETE *************
+ *		_GUS_VOICEON	- Starts voice (P1=voice mode)
+ *		_GUS_VOICEOFF	- Stops voice (no parameters)
+ *		_GUS_VOICEFADE	- Stops the voice smoothly.
+ *		_GUS_VOICEMODE	- Alters the voice mode, don't start or stop voice (P1=voice mode)
+ *		_GUS_VOICEBALA	- Sets voice balance (P1, 0=left, 7=middle and 15=right, default 7)
+ *		_GUS_VOICEFREQ	- Sets voice (sample) playback frequency (P1=Hz)
+ *		_GUS_VOICEVOL	- Sets voice volume (P1=volume, 0xfff=max, 0xeff=half, 0x000=off)
+ *		_GUS_VOICEVOL2	- Sets voice volume (P1=volume, 0xfff=max, 0xeff=half, 0x000=off)
+ *				  (Like GUS_VOICEVOL but doesn't change the hw
+ *				  volume. It just updates volume in the voice table).
+ *
+ *		_GUS_RAMPRANGE	- Sets limits for volume ramping (P1=low volume, P2=high volume)
+ *		_GUS_RAMPRATE	- Sets the speed for volume ramping (P1=scale, P2=rate)
+ *		_GUS_RAMPMODE	- Sets the volume ramping mode (P1=ramping mode)
+ *		_GUS_RAMPON	- Starts volume ramping (no parameters)
+ *		_GUS_RAMPOFF	- Stops volume ramping (no parameters)
+ *		_GUS_VOLUME_SCALE - Changes the volume calculation constants
+ *				  for all voices.
+ */
+
+#define _GUS_NUMVOICES		0x00
+#define _GUS_VOICESAMPLE	0x01	/* OBSOLETE */
+#define _GUS_VOICEON		0x02
+#define _GUS_VOICEOFF		0x03
+#define _GUS_VOICEMODE		0x04
+#define _GUS_VOICEBALA		0x05
+#define _GUS_VOICEFREQ		0x06
+#define _GUS_VOICEVOL		0x07
+#define _GUS_RAMPRANGE		0x08
+#define _GUS_RAMPRATE		0x09
+#define _GUS_RAMPMODE		0x0a
+#define _GUS_RAMPON		0x0b
+#define _GUS_RAMPOFF		0x0c
+#define _GUS_VOICEFADE		0x0d
+#define _GUS_VOLUME_SCALE	0x0e
+#define _GUS_VOICEVOL2		0x0f
+#define _GUS_VOICE_POS		0x10
+
+/*
+ *	GUS API macros
+ */
+
+#define _GUS_CMD(chn, voice, cmd, p1, p2) \
+					{_SEQ_NEEDBUF(8); _seqbuf[_seqbufptr] = SEQ_PRIVATE;\
+					_seqbuf[_seqbufptr+1] = (chn); _seqbuf[_seqbufptr+2] = cmd;\
+					_seqbuf[_seqbufptr+3] = voice;\
+					*(unsigned short*)&_seqbuf[_seqbufptr+4] = p1;\
+					*(unsigned short*)&_seqbuf[_seqbufptr+6] = p2;\
+					_SEQ_ADVBUF(8);}
+
+#define GUS_NUMVOICES(chn, p1)			_GUS_CMD(chn, 0, _GUS_NUMVOICES, (p1), 0)
+#define GUS_VOICESAMPLE(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICESAMPLE, (p1), 0)	/* OBSOLETE */
+#define GUS_VOICEON(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICEON, (p1), 0)
+#define GUS_VOICEOFF(chn, voice)		_GUS_CMD(chn, voice, _GUS_VOICEOFF, 0, 0)
+#define GUS_VOICEFADE(chn, voice)		_GUS_CMD(chn, voice, _GUS_VOICEFADE, 0, 0)
+#define GUS_VOICEMODE(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICEMODE, (p1), 0)
+#define GUS_VOICEBALA(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICEBALA, (p1), 0)
+#define GUS_VOICEFREQ(chn, voice, p)		_GUS_CMD(chn, voice, _GUS_VOICEFREQ, \
+							(p) & 0xffff, ((p) >> 16) & 0xffff)
+#define GUS_VOICEVOL(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICEVOL, (p1), 0)
+#define GUS_VOICEVOL2(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICEVOL2, (p1), 0)
+#define GUS_RAMPRANGE(chn, voice, low, high)	_GUS_CMD(chn, voice, _GUS_RAMPRANGE, (low), (high))
+#define GUS_RAMPRATE(chn, voice, p1, p2)	_GUS_CMD(chn, voice, _GUS_RAMPRATE, (p1), (p2))
+#define GUS_RAMPMODE(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_RAMPMODE, (p1), 0)
+#define GUS_RAMPON(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_RAMPON, (p1), 0)
+#define GUS_RAMPOFF(chn, voice)			_GUS_CMD(chn, voice, _GUS_RAMPOFF, 0, 0)
+#define GUS_VOLUME_SCALE(chn, voice, p1, p2)	_GUS_CMD(chn, voice, _GUS_VOLUME_SCALE, (p1), (p2))
+#define GUS_VOICE_POS(chn, voice, p)		_GUS_CMD(chn, voice, _GUS_VOICE_POS, \
+							(p) & 0xffff, ((p) >> 16) & 0xffff)
+
+#endif
diff --git a/include/uapi/linux/un.h b/include/uapi/linux/un.h
new file mode 100644
index 00000000000..3ed3e46c1b1
--- /dev/null
+++ b/include/uapi/linux/un.h
@@ -0,0 +1,13 @@
+#ifndef _LINUX_UN_H
+#define _LINUX_UN_H
+
+#include <linux/socket.h>
+
+#define UNIX_PATH_MAX	108
+
+struct sockaddr_un {
+	__kernel_sa_family_t sun_family; /* AF_UNIX */
+	char sun_path[UNIX_PATH_MAX];	/* pathname */
+};
+
+#endif /* _LINUX_UN_H */
diff --git a/include/uapi/linux/unistd.h b/include/uapi/linux/unistd.h
new file mode 100644
index 00000000000..aa8d5b5e2e3
--- /dev/null
+++ b/include/uapi/linux/unistd.h
@@ -0,0 +1,9 @@
+#ifndef _LINUX_UNISTD_H_
+#define _LINUX_UNISTD_H_
+
+/*
+ * Include machine specific syscall numbers
+ */
+#include <asm/unistd.h>
+
+#endif /* _LINUX_UNISTD_H_ */
diff --git a/include/uapi/linux/unix_diag.h b/include/uapi/linux/unix_diag.h
new file mode 100644
index 00000000000..b1d2bf16b33
--- /dev/null
+++ b/include/uapi/linux/unix_diag.h
@@ -0,0 +1,54 @@
+#ifndef __UNIX_DIAG_H__
+#define __UNIX_DIAG_H__
+
+#include <linux/types.h>
+
+struct unix_diag_req {
+	__u8	sdiag_family;
+	__u8	sdiag_protocol;
+	__u16	pad;
+	__u32	udiag_states;
+	__u32	udiag_ino;
+	__u32	udiag_show;
+	__u32	udiag_cookie[2];
+};
+
+#define UDIAG_SHOW_NAME		0x00000001	/* show name (not path) */
+#define UDIAG_SHOW_VFS		0x00000002	/* show VFS inode info */
+#define UDIAG_SHOW_PEER		0x00000004	/* show peer socket info */
+#define UDIAG_SHOW_ICONS	0x00000008	/* show pending connections */
+#define UDIAG_SHOW_RQLEN	0x00000010	/* show skb receive queue len */
+#define UDIAG_SHOW_MEMINFO	0x00000020	/* show memory info of a socket */
+
+struct unix_diag_msg {
+	__u8	udiag_family;
+	__u8	udiag_type;
+	__u8	udiag_state;
+	__u8	pad;
+
+	__u32	udiag_ino;
+	__u32	udiag_cookie[2];
+};
+
+enum {
+	UNIX_DIAG_NAME,
+	UNIX_DIAG_VFS,
+	UNIX_DIAG_PEER,
+	UNIX_DIAG_ICONS,
+	UNIX_DIAG_RQLEN,
+	UNIX_DIAG_MEMINFO,
+
+	UNIX_DIAG_MAX,
+};
+
+struct unix_diag_vfs {
+	__u32	udiag_vfs_ino;
+	__u32	udiag_vfs_dev;
+};
+
+struct unix_diag_rqlen {
+	__u32	udiag_rqueue;
+	__u32	udiag_wqueue;
+};
+
+#endif
diff --git a/include/uapi/linux/usbdevice_fs.h b/include/uapi/linux/usbdevice_fs.h
new file mode 100644
index 00000000000..0c65e4b1261
--- /dev/null
+++ b/include/uapi/linux/usbdevice_fs.h
@@ -0,0 +1,180 @@
+/*****************************************************************************/
+
+/*
+ *	usbdevice_fs.h  --  USB device file system.
+ *
+ *	Copyright (C) 2000
+ *          Thomas Sailer (sailer@ife.ee.ethz.ch)
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ *
+ *	You should have received a copy of the GNU General Public License
+ *	along with this program; if not, write to the Free Software
+ *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *  History:
+ *   0.1  04.01.2000  Created
+ */
+
+/*****************************************************************************/
+
+#ifndef _UAPI_LINUX_USBDEVICE_FS_H
+#define _UAPI_LINUX_USBDEVICE_FS_H
+
+#include <linux/types.h>
+#include <linux/magic.h>
+
+/* --------------------------------------------------------------------- */
+
+/* usbdevfs ioctl codes */
+
+struct usbdevfs_ctrltransfer {
+	__u8 bRequestType;
+	__u8 bRequest;
+	__u16 wValue;
+	__u16 wIndex;
+	__u16 wLength;
+	__u32 timeout;  /* in milliseconds */
+ 	void __user *data;
+};
+
+struct usbdevfs_bulktransfer {
+	unsigned int ep;
+	unsigned int len;
+	unsigned int timeout; /* in milliseconds */
+	void __user *data;
+};
+
+struct usbdevfs_setinterface {
+	unsigned int interface;
+	unsigned int altsetting;
+};
+
+struct usbdevfs_disconnectsignal {
+	unsigned int signr;
+	void __user *context;
+};
+
+#define USBDEVFS_MAXDRIVERNAME 255
+
+struct usbdevfs_getdriver {
+	unsigned int interface;
+	char driver[USBDEVFS_MAXDRIVERNAME + 1];
+};
+
+struct usbdevfs_connectinfo {
+	unsigned int devnum;
+	unsigned char slow;
+};
+
+#define USBDEVFS_URB_SHORT_NOT_OK	0x01
+#define USBDEVFS_URB_ISO_ASAP		0x02
+#define USBDEVFS_URB_BULK_CONTINUATION	0x04
+#define USBDEVFS_URB_NO_FSBR		0x20
+#define USBDEVFS_URB_ZERO_PACKET	0x40
+#define USBDEVFS_URB_NO_INTERRUPT	0x80
+
+#define USBDEVFS_URB_TYPE_ISO		   0
+#define USBDEVFS_URB_TYPE_INTERRUPT	   1
+#define USBDEVFS_URB_TYPE_CONTROL	   2
+#define USBDEVFS_URB_TYPE_BULK		   3
+
+struct usbdevfs_iso_packet_desc {
+	unsigned int length;
+	unsigned int actual_length;
+	unsigned int status;
+};
+
+struct usbdevfs_urb {
+	unsigned char type;
+	unsigned char endpoint;
+	int status;
+	unsigned int flags;
+	void __user *buffer;
+	int buffer_length;
+	int actual_length;
+	int start_frame;
+	int number_of_packets;
+	int error_count;
+	unsigned int signr;	/* signal to be sent on completion,
+				  or 0 if none should be sent. */
+	void __user *usercontext;
+	struct usbdevfs_iso_packet_desc iso_frame_desc[0];
+};
+
+/* ioctls for talking directly to drivers */
+struct usbdevfs_ioctl {
+	int	ifno;		/* interface 0..N ; negative numbers reserved */
+	int	ioctl_code;	/* MUST encode size + direction of data so the
+				 * macros in <asm/ioctl.h> give correct values */
+	void __user *data;	/* param buffer (in, or out) */
+};
+
+/* You can do most things with hubs just through control messages,
+ * except find out what device connects to what port. */
+struct usbdevfs_hub_portinfo {
+	char nports;		/* number of downstream ports in this hub */
+	char port [127];	/* e.g. port 3 connects to device 27 */
+};
+
+/* Device capability flags */
+#define USBDEVFS_CAP_ZERO_PACKET		0x01
+#define USBDEVFS_CAP_BULK_CONTINUATION		0x02
+#define USBDEVFS_CAP_NO_PACKET_SIZE_LIM		0x04
+#define USBDEVFS_CAP_BULK_SCATTER_GATHER	0x08
+
+/* USBDEVFS_DISCONNECT_CLAIM flags & struct */
+
+/* disconnect-and-claim if the driver matches the driver field */
+#define USBDEVFS_DISCONNECT_CLAIM_IF_DRIVER	0x01
+/* disconnect-and-claim except when the driver matches the driver field */
+#define USBDEVFS_DISCONNECT_CLAIM_EXCEPT_DRIVER	0x02
+
+struct usbdevfs_disconnect_claim {
+	unsigned int interface;
+	unsigned int flags;
+	char driver[USBDEVFS_MAXDRIVERNAME + 1];
+};
+
+
+#define USBDEVFS_CONTROL           _IOWR('U', 0, struct usbdevfs_ctrltransfer)
+#define USBDEVFS_CONTROL32           _IOWR('U', 0, struct usbdevfs_ctrltransfer32)
+#define USBDEVFS_BULK              _IOWR('U', 2, struct usbdevfs_bulktransfer)
+#define USBDEVFS_BULK32              _IOWR('U', 2, struct usbdevfs_bulktransfer32)
+#define USBDEVFS_RESETEP           _IOR('U', 3, unsigned int)
+#define USBDEVFS_SETINTERFACE      _IOR('U', 4, struct usbdevfs_setinterface)
+#define USBDEVFS_SETCONFIGURATION  _IOR('U', 5, unsigned int)
+#define USBDEVFS_GETDRIVER         _IOW('U', 8, struct usbdevfs_getdriver)
+#define USBDEVFS_SUBMITURB         _IOR('U', 10, struct usbdevfs_urb)
+#define USBDEVFS_SUBMITURB32       _IOR('U', 10, struct usbdevfs_urb32)
+#define USBDEVFS_DISCARDURB        _IO('U', 11)
+#define USBDEVFS_REAPURB           _IOW('U', 12, void *)
+#define USBDEVFS_REAPURB32         _IOW('U', 12, __u32)
+#define USBDEVFS_REAPURBNDELAY     _IOW('U', 13, void *)
+#define USBDEVFS_REAPURBNDELAY32   _IOW('U', 13, __u32)
+#define USBDEVFS_DISCSIGNAL        _IOR('U', 14, struct usbdevfs_disconnectsignal)
+#define USBDEVFS_DISCSIGNAL32      _IOR('U', 14, struct usbdevfs_disconnectsignal32)
+#define USBDEVFS_CLAIMINTERFACE    _IOR('U', 15, unsigned int)
+#define USBDEVFS_RELEASEINTERFACE  _IOR('U', 16, unsigned int)
+#define USBDEVFS_CONNECTINFO       _IOW('U', 17, struct usbdevfs_connectinfo)
+#define USBDEVFS_IOCTL             _IOWR('U', 18, struct usbdevfs_ioctl)
+#define USBDEVFS_IOCTL32           _IOWR('U', 18, struct usbdevfs_ioctl32)
+#define USBDEVFS_HUB_PORTINFO      _IOR('U', 19, struct usbdevfs_hub_portinfo)
+#define USBDEVFS_RESET             _IO('U', 20)
+#define USBDEVFS_CLEAR_HALT        _IOR('U', 21, unsigned int)
+#define USBDEVFS_DISCONNECT        _IO('U', 22)
+#define USBDEVFS_CONNECT           _IO('U', 23)
+#define USBDEVFS_CLAIM_PORT        _IOR('U', 24, unsigned int)
+#define USBDEVFS_RELEASE_PORT      _IOR('U', 25, unsigned int)
+#define USBDEVFS_GET_CAPABILITIES  _IOR('U', 26, __u32)
+#define USBDEVFS_DISCONNECT_CLAIM  _IOR('U', 27, struct usbdevfs_disconnect_claim)
+
+#endif /* _UAPI_LINUX_USBDEVICE_FS_H */
diff --git a/include/uapi/linux/utime.h b/include/uapi/linux/utime.h
new file mode 100644
index 00000000000..5cdf673afbd
--- /dev/null
+++ b/include/uapi/linux/utime.h
@@ -0,0 +1,11 @@
+#ifndef _LINUX_UTIME_H
+#define _LINUX_UTIME_H
+
+#include <linux/types.h>
+
+struct utimbuf {
+	__kernel_time_t actime;
+	__kernel_time_t modtime;
+};
+
+#endif
diff --git a/include/uapi/linux/utsname.h b/include/uapi/linux/utsname.h
new file mode 100644
index 00000000000..872c2df10de
--- /dev/null
+++ b/include/uapi/linux/utsname.h
@@ -0,0 +1,34 @@
+#ifndef _UAPI_LINUX_UTSNAME_H
+#define _UAPI_LINUX_UTSNAME_H
+
+#define __OLD_UTS_LEN 8
+
+struct oldold_utsname {
+	char sysname[9];
+	char nodename[9];
+	char release[9];
+	char version[9];
+	char machine[9];
+};
+
+#define __NEW_UTS_LEN 64
+
+struct old_utsname {
+	char sysname[65];
+	char nodename[65];
+	char release[65];
+	char version[65];
+	char machine[65];
+};
+
+struct new_utsname {
+	char sysname[__NEW_UTS_LEN + 1];
+	char nodename[__NEW_UTS_LEN + 1];
+	char release[__NEW_UTS_LEN + 1];
+	char version[__NEW_UTS_LEN + 1];
+	char machine[__NEW_UTS_LEN + 1];
+	char domainname[__NEW_UTS_LEN + 1];
+};
+
+
+#endif /* _UAPI_LINUX_UTSNAME_H */
diff --git a/include/uapi/linux/uuid.h b/include/uapi/linux/uuid.h
new file mode 100644
index 00000000000..786f0773cc3
--- /dev/null
+++ b/include/uapi/linux/uuid.h
@@ -0,0 +1,58 @@
+/*
+ * UUID/GUID definition
+ *
+ * Copyright (C) 2010, Intel Corp.
+ *	Huang Ying <ying.huang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation;
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _UAPI_LINUX_UUID_H_
+#define _UAPI_LINUX_UUID_H_
+
+#include <linux/types.h>
+#include <linux/string.h>
+
+typedef struct {
+	__u8 b[16];
+} uuid_le;
+
+typedef struct {
+	__u8 b[16];
+} uuid_be;
+
+#define UUID_LE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7)		\
+((uuid_le)								\
+{{ (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \
+   (b) & 0xff, ((b) >> 8) & 0xff,					\
+   (c) & 0xff, ((c) >> 8) & 0xff,					\
+   (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }})
+
+#define UUID_BE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7)		\
+((uuid_be)								\
+{{ ((a) >> 24) & 0xff, ((a) >> 16) & 0xff, ((a) >> 8) & 0xff, (a) & 0xff, \
+   ((b) >> 8) & 0xff, (b) & 0xff,					\
+   ((c) >> 8) & 0xff, (c) & 0xff,					\
+   (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }})
+
+#define NULL_UUID_LE							\
+	UUID_LE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00,	\
+		0x00, 0x00, 0x00, 0x00)
+
+#define NULL_UUID_BE							\
+	UUID_BE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00,	\
+		0x00, 0x00, 0x00, 0x00)
+
+
+#endif /* _UAPI_LINUX_UUID_H_ */
diff --git a/include/uapi/linux/uvcvideo.h b/include/uapi/linux/uvcvideo.h
new file mode 100644
index 00000000000..3b081862b9e
--- /dev/null
+++ b/include/uapi/linux/uvcvideo.h
@@ -0,0 +1,70 @@
+#ifndef __LINUX_UVCVIDEO_H_
+#define __LINUX_UVCVIDEO_H_
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+/*
+ * Dynamic controls
+ */
+
+/* Data types for UVC control data */
+#define UVC_CTRL_DATA_TYPE_RAW		0
+#define UVC_CTRL_DATA_TYPE_SIGNED	1
+#define UVC_CTRL_DATA_TYPE_UNSIGNED	2
+#define UVC_CTRL_DATA_TYPE_BOOLEAN	3
+#define UVC_CTRL_DATA_TYPE_ENUM		4
+#define UVC_CTRL_DATA_TYPE_BITMASK	5
+
+/* Control flags */
+#define UVC_CTRL_FLAG_SET_CUR		(1 << 0)
+#define UVC_CTRL_FLAG_GET_CUR		(1 << 1)
+#define UVC_CTRL_FLAG_GET_MIN		(1 << 2)
+#define UVC_CTRL_FLAG_GET_MAX		(1 << 3)
+#define UVC_CTRL_FLAG_GET_RES		(1 << 4)
+#define UVC_CTRL_FLAG_GET_DEF		(1 << 5)
+/* Control should be saved at suspend and restored at resume. */
+#define UVC_CTRL_FLAG_RESTORE		(1 << 6)
+/* Control can be updated by the camera. */
+#define UVC_CTRL_FLAG_AUTO_UPDATE	(1 << 7)
+
+#define UVC_CTRL_FLAG_GET_RANGE \
+	(UVC_CTRL_FLAG_GET_CUR | UVC_CTRL_FLAG_GET_MIN | \
+	 UVC_CTRL_FLAG_GET_MAX | UVC_CTRL_FLAG_GET_RES | \
+	 UVC_CTRL_FLAG_GET_DEF)
+
+struct uvc_menu_info {
+	__u32 value;
+	__u8 name[32];
+};
+
+struct uvc_xu_control_mapping {
+	__u32 id;
+	__u8 name[32];
+	__u8 entity[16];
+	__u8 selector;
+
+	__u8 size;
+	__u8 offset;
+	__u32 v4l2_type;
+	__u32 data_type;
+
+	struct uvc_menu_info __user *menu_info;
+	__u32 menu_count;
+
+	__u32 reserved[4];
+};
+
+struct uvc_xu_control_query {
+	__u8 unit;
+	__u8 selector;
+	__u8 query;		/* Video Class-Specific Request Code, */
+				/* defined in linux/usb/video.h A.8.  */
+	__u16 size;
+	__u8 __user *data;
+};
+
+#define UVCIOC_CTRL_MAP		_IOWR('u', 0x20, struct uvc_xu_control_mapping)
+#define UVCIOC_CTRL_QUERY	_IOWR('u', 0x21, struct uvc_xu_control_query)
+
+#endif
diff --git a/include/uapi/linux/v4l2-common.h b/include/uapi/linux/v4l2-common.h
new file mode 100644
index 00000000000..4f0667e010d
--- /dev/null
+++ b/include/uapi/linux/v4l2-common.h
@@ -0,0 +1,71 @@
+/*
+ * include/linux/v4l2-common.h
+ *
+ * Common V4L2 and V4L2 subdev definitions.
+ *
+ * Users are advised to #include this file either through videodev2.h
+ * (V4L2) or through v4l2-subdev.h (V4L2 subdev) rather than to refer
+ * to this file directly.
+ *
+ * Copyright (C) 2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __V4L2_COMMON__
+#define __V4L2_COMMON__
+
+/*
+ *
+ * Selection interface definitions
+ *
+ */
+
+/* Current cropping area */
+#define V4L2_SEL_TGT_CROP		0x0000
+/* Default cropping area */
+#define V4L2_SEL_TGT_CROP_DEFAULT	0x0001
+/* Cropping bounds */
+#define V4L2_SEL_TGT_CROP_BOUNDS	0x0002
+/* Current composing area */
+#define V4L2_SEL_TGT_COMPOSE		0x0100
+/* Default composing area */
+#define V4L2_SEL_TGT_COMPOSE_DEFAULT	0x0101
+/* Composing bounds */
+#define V4L2_SEL_TGT_COMPOSE_BOUNDS	0x0102
+/* Current composing area plus all padding pixels */
+#define V4L2_SEL_TGT_COMPOSE_PADDED	0x0103
+
+/* Backward compatibility target definitions --- to be removed. */
+#define V4L2_SEL_TGT_CROP_ACTIVE	V4L2_SEL_TGT_CROP
+#define V4L2_SEL_TGT_COMPOSE_ACTIVE	V4L2_SEL_TGT_COMPOSE
+#define V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL	V4L2_SEL_TGT_CROP
+#define V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL V4L2_SEL_TGT_COMPOSE
+#define V4L2_SUBDEV_SEL_TGT_CROP_BOUNDS	V4L2_SEL_TGT_CROP_BOUNDS
+#define V4L2_SUBDEV_SEL_TGT_COMPOSE_BOUNDS V4L2_SEL_TGT_COMPOSE_BOUNDS
+
+/* Selection flags */
+#define V4L2_SEL_FLAG_GE		(1 << 0)
+#define V4L2_SEL_FLAG_LE		(1 << 1)
+#define V4L2_SEL_FLAG_KEEP_CONFIG	(1 << 2)
+
+/* Backward compatibility flag definitions --- to be removed. */
+#define V4L2_SUBDEV_SEL_FLAG_SIZE_GE	V4L2_SEL_FLAG_GE
+#define V4L2_SUBDEV_SEL_FLAG_SIZE_LE	V4L2_SEL_FLAG_LE
+#define V4L2_SUBDEV_SEL_FLAG_KEEP_CONFIG V4L2_SEL_FLAG_KEEP_CONFIG
+
+#endif /* __V4L2_COMMON__ */
diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
new file mode 100644
index 00000000000..f56c945cecd
--- /dev/null
+++ b/include/uapi/linux/v4l2-controls.h
@@ -0,0 +1,803 @@
+/*
+ *  Video for Linux Two controls header file
+ *
+ *  Copyright (C) 1999-2012 the contributors
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  Alternatively you can redistribute this file under the terms of the
+ *  BSD license as stated below:
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *  1. Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *  2. Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *  3. The names of its contributors may not be used to endorse or promote
+ *     products derived from this software without specific prior written
+ *     permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ *  TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ *  PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ *  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ *  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ *  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  The contents of this header was split off from videodev2.h. All control
+ *  definitions should be added to this header, which is included by
+ *  videodev2.h.
+ */
+
+#ifndef __LINUX_V4L2_CONTROLS_H
+#define __LINUX_V4L2_CONTROLS_H
+
+/* Control classes */
+#define V4L2_CTRL_CLASS_USER		0x00980000	/* Old-style 'user' controls */
+#define V4L2_CTRL_CLASS_MPEG		0x00990000	/* MPEG-compression controls */
+#define V4L2_CTRL_CLASS_CAMERA		0x009a0000	/* Camera class controls */
+#define V4L2_CTRL_CLASS_FM_TX		0x009b0000	/* FM Modulator control class */
+#define V4L2_CTRL_CLASS_FLASH		0x009c0000	/* Camera flash controls */
+#define V4L2_CTRL_CLASS_JPEG		0x009d0000	/* JPEG-compression controls */
+#define V4L2_CTRL_CLASS_IMAGE_SOURCE	0x009e0000	/* Image source controls */
+#define V4L2_CTRL_CLASS_IMAGE_PROC	0x009f0000	/* Image processing controls */
+#define V4L2_CTRL_CLASS_DV		0x00a00000	/* Digital Video controls */
+
+/* User-class control IDs */
+
+#define V4L2_CID_BASE			(V4L2_CTRL_CLASS_USER | 0x900)
+#define V4L2_CID_USER_BASE 		V4L2_CID_BASE
+#define V4L2_CID_USER_CLASS 		(V4L2_CTRL_CLASS_USER | 1)
+#define V4L2_CID_BRIGHTNESS		(V4L2_CID_BASE+0)
+#define V4L2_CID_CONTRAST		(V4L2_CID_BASE+1)
+#define V4L2_CID_SATURATION		(V4L2_CID_BASE+2)
+#define V4L2_CID_HUE			(V4L2_CID_BASE+3)
+#define V4L2_CID_AUDIO_VOLUME		(V4L2_CID_BASE+5)
+#define V4L2_CID_AUDIO_BALANCE		(V4L2_CID_BASE+6)
+#define V4L2_CID_AUDIO_BASS		(V4L2_CID_BASE+7)
+#define V4L2_CID_AUDIO_TREBLE		(V4L2_CID_BASE+8)
+#define V4L2_CID_AUDIO_MUTE		(V4L2_CID_BASE+9)
+#define V4L2_CID_AUDIO_LOUDNESS		(V4L2_CID_BASE+10)
+#define V4L2_CID_BLACK_LEVEL		(V4L2_CID_BASE+11) /* Deprecated */
+#define V4L2_CID_AUTO_WHITE_BALANCE	(V4L2_CID_BASE+12)
+#define V4L2_CID_DO_WHITE_BALANCE	(V4L2_CID_BASE+13)
+#define V4L2_CID_RED_BALANCE		(V4L2_CID_BASE+14)
+#define V4L2_CID_BLUE_BALANCE		(V4L2_CID_BASE+15)
+#define V4L2_CID_GAMMA			(V4L2_CID_BASE+16)
+#define V4L2_CID_WHITENESS		(V4L2_CID_GAMMA) /* Deprecated */
+#define V4L2_CID_EXPOSURE		(V4L2_CID_BASE+17)
+#define V4L2_CID_AUTOGAIN		(V4L2_CID_BASE+18)
+#define V4L2_CID_GAIN			(V4L2_CID_BASE+19)
+#define V4L2_CID_HFLIP			(V4L2_CID_BASE+20)
+#define V4L2_CID_VFLIP			(V4L2_CID_BASE+21)
+
+/* Deprecated; use V4L2_CID_PAN_RESET and V4L2_CID_TILT_RESET */
+#define V4L2_CID_HCENTER		(V4L2_CID_BASE+22)
+#define V4L2_CID_VCENTER		(V4L2_CID_BASE+23)
+
+#define V4L2_CID_POWER_LINE_FREQUENCY	(V4L2_CID_BASE+24)
+enum v4l2_power_line_frequency {
+	V4L2_CID_POWER_LINE_FREQUENCY_DISABLED	= 0,
+	V4L2_CID_POWER_LINE_FREQUENCY_50HZ	= 1,
+	V4L2_CID_POWER_LINE_FREQUENCY_60HZ	= 2,
+	V4L2_CID_POWER_LINE_FREQUENCY_AUTO	= 3,
+};
+#define V4L2_CID_HUE_AUTO			(V4L2_CID_BASE+25)
+#define V4L2_CID_WHITE_BALANCE_TEMPERATURE	(V4L2_CID_BASE+26)
+#define V4L2_CID_SHARPNESS			(V4L2_CID_BASE+27)
+#define V4L2_CID_BACKLIGHT_COMPENSATION 	(V4L2_CID_BASE+28)
+#define V4L2_CID_CHROMA_AGC                     (V4L2_CID_BASE+29)
+#define V4L2_CID_COLOR_KILLER                   (V4L2_CID_BASE+30)
+#define V4L2_CID_COLORFX			(V4L2_CID_BASE+31)
+enum v4l2_colorfx {
+	V4L2_COLORFX_NONE			= 0,
+	V4L2_COLORFX_BW				= 1,
+	V4L2_COLORFX_SEPIA			= 2,
+	V4L2_COLORFX_NEGATIVE			= 3,
+	V4L2_COLORFX_EMBOSS			= 4,
+	V4L2_COLORFX_SKETCH			= 5,
+	V4L2_COLORFX_SKY_BLUE			= 6,
+	V4L2_COLORFX_GRASS_GREEN		= 7,
+	V4L2_COLORFX_SKIN_WHITEN		= 8,
+	V4L2_COLORFX_VIVID			= 9,
+	V4L2_COLORFX_AQUA			= 10,
+	V4L2_COLORFX_ART_FREEZE			= 11,
+	V4L2_COLORFX_SILHOUETTE			= 12,
+	V4L2_COLORFX_SOLARIZATION		= 13,
+	V4L2_COLORFX_ANTIQUE			= 14,
+	V4L2_COLORFX_SET_CBCR			= 15,
+};
+#define V4L2_CID_AUTOBRIGHTNESS			(V4L2_CID_BASE+32)
+#define V4L2_CID_BAND_STOP_FILTER		(V4L2_CID_BASE+33)
+
+#define V4L2_CID_ROTATE				(V4L2_CID_BASE+34)
+#define V4L2_CID_BG_COLOR			(V4L2_CID_BASE+35)
+
+#define V4L2_CID_CHROMA_GAIN                    (V4L2_CID_BASE+36)
+
+#define V4L2_CID_ILLUMINATORS_1			(V4L2_CID_BASE+37)
+#define V4L2_CID_ILLUMINATORS_2			(V4L2_CID_BASE+38)
+
+#define V4L2_CID_MIN_BUFFERS_FOR_CAPTURE	(V4L2_CID_BASE+39)
+#define V4L2_CID_MIN_BUFFERS_FOR_OUTPUT		(V4L2_CID_BASE+40)
+
+#define V4L2_CID_ALPHA_COMPONENT		(V4L2_CID_BASE+41)
+#define V4L2_CID_COLORFX_CBCR			(V4L2_CID_BASE+42)
+
+/* last CID + 1 */
+#define V4L2_CID_LASTP1                         (V4L2_CID_BASE+43)
+
+
+/* MPEG-class control IDs */
+
+#define V4L2_CID_MPEG_BASE 			(V4L2_CTRL_CLASS_MPEG | 0x900)
+#define V4L2_CID_MPEG_CLASS 			(V4L2_CTRL_CLASS_MPEG | 1)
+
+/*  MPEG streams, specific to multiplexed streams */
+#define V4L2_CID_MPEG_STREAM_TYPE 		(V4L2_CID_MPEG_BASE+0)
+enum v4l2_mpeg_stream_type {
+	V4L2_MPEG_STREAM_TYPE_MPEG2_PS   = 0, /* MPEG-2 program stream */
+	V4L2_MPEG_STREAM_TYPE_MPEG2_TS   = 1, /* MPEG-2 transport stream */
+	V4L2_MPEG_STREAM_TYPE_MPEG1_SS   = 2, /* MPEG-1 system stream */
+	V4L2_MPEG_STREAM_TYPE_MPEG2_DVD  = 3, /* MPEG-2 DVD-compatible stream */
+	V4L2_MPEG_STREAM_TYPE_MPEG1_VCD  = 4, /* MPEG-1 VCD-compatible stream */
+	V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD = 5, /* MPEG-2 SVCD-compatible stream */
+};
+#define V4L2_CID_MPEG_STREAM_PID_PMT 		(V4L2_CID_MPEG_BASE+1)
+#define V4L2_CID_MPEG_STREAM_PID_AUDIO 		(V4L2_CID_MPEG_BASE+2)
+#define V4L2_CID_MPEG_STREAM_PID_VIDEO 		(V4L2_CID_MPEG_BASE+3)
+#define V4L2_CID_MPEG_STREAM_PID_PCR 		(V4L2_CID_MPEG_BASE+4)
+#define V4L2_CID_MPEG_STREAM_PES_ID_AUDIO 	(V4L2_CID_MPEG_BASE+5)
+#define V4L2_CID_MPEG_STREAM_PES_ID_VIDEO 	(V4L2_CID_MPEG_BASE+6)
+#define V4L2_CID_MPEG_STREAM_VBI_FMT 		(V4L2_CID_MPEG_BASE+7)
+enum v4l2_mpeg_stream_vbi_fmt {
+	V4L2_MPEG_STREAM_VBI_FMT_NONE = 0,  /* No VBI in the MPEG stream */
+	V4L2_MPEG_STREAM_VBI_FMT_IVTV = 1,  /* VBI in private packets, IVTV format */
+};
+
+/*  MPEG audio controls specific to multiplexed streams  */
+#define V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ 	(V4L2_CID_MPEG_BASE+100)
+enum v4l2_mpeg_audio_sampling_freq {
+	V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100 = 0,
+	V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000 = 1,
+	V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000 = 2,
+};
+#define V4L2_CID_MPEG_AUDIO_ENCODING 		(V4L2_CID_MPEG_BASE+101)
+enum v4l2_mpeg_audio_encoding {
+	V4L2_MPEG_AUDIO_ENCODING_LAYER_1 = 0,
+	V4L2_MPEG_AUDIO_ENCODING_LAYER_2 = 1,
+	V4L2_MPEG_AUDIO_ENCODING_LAYER_3 = 2,
+	V4L2_MPEG_AUDIO_ENCODING_AAC     = 3,
+	V4L2_MPEG_AUDIO_ENCODING_AC3     = 4,
+};
+#define V4L2_CID_MPEG_AUDIO_L1_BITRATE 		(V4L2_CID_MPEG_BASE+102)
+enum v4l2_mpeg_audio_l1_bitrate {
+	V4L2_MPEG_AUDIO_L1_BITRATE_32K  = 0,
+	V4L2_MPEG_AUDIO_L1_BITRATE_64K  = 1,
+	V4L2_MPEG_AUDIO_L1_BITRATE_96K  = 2,
+	V4L2_MPEG_AUDIO_L1_BITRATE_128K = 3,
+	V4L2_MPEG_AUDIO_L1_BITRATE_160K = 4,
+	V4L2_MPEG_AUDIO_L1_BITRATE_192K = 5,
+	V4L2_MPEG_AUDIO_L1_BITRATE_224K = 6,
+	V4L2_MPEG_AUDIO_L1_BITRATE_256K = 7,
+	V4L2_MPEG_AUDIO_L1_BITRATE_288K = 8,
+	V4L2_MPEG_AUDIO_L1_BITRATE_320K = 9,
+	V4L2_MPEG_AUDIO_L1_BITRATE_352K = 10,
+	V4L2_MPEG_AUDIO_L1_BITRATE_384K = 11,
+	V4L2_MPEG_AUDIO_L1_BITRATE_416K = 12,
+	V4L2_MPEG_AUDIO_L1_BITRATE_448K = 13,
+};
+#define V4L2_CID_MPEG_AUDIO_L2_BITRATE 		(V4L2_CID_MPEG_BASE+103)
+enum v4l2_mpeg_audio_l2_bitrate {
+	V4L2_MPEG_AUDIO_L2_BITRATE_32K  = 0,
+	V4L2_MPEG_AUDIO_L2_BITRATE_48K  = 1,
+	V4L2_MPEG_AUDIO_L2_BITRATE_56K  = 2,
+	V4L2_MPEG_AUDIO_L2_BITRATE_64K  = 3,
+	V4L2_MPEG_AUDIO_L2_BITRATE_80K  = 4,
+	V4L2_MPEG_AUDIO_L2_BITRATE_96K  = 5,
+	V4L2_MPEG_AUDIO_L2_BITRATE_112K = 6,
+	V4L2_MPEG_AUDIO_L2_BITRATE_128K = 7,
+	V4L2_MPEG_AUDIO_L2_BITRATE_160K = 8,
+	V4L2_MPEG_AUDIO_L2_BITRATE_192K = 9,
+	V4L2_MPEG_AUDIO_L2_BITRATE_224K = 10,
+	V4L2_MPEG_AUDIO_L2_BITRATE_256K = 11,
+	V4L2_MPEG_AUDIO_L2_BITRATE_320K = 12,
+	V4L2_MPEG_AUDIO_L2_BITRATE_384K = 13,
+};
+#define V4L2_CID_MPEG_AUDIO_L3_BITRATE 		(V4L2_CID_MPEG_BASE+104)
+enum v4l2_mpeg_audio_l3_bitrate {
+	V4L2_MPEG_AUDIO_L3_BITRATE_32K  = 0,
+	V4L2_MPEG_AUDIO_L3_BITRATE_40K  = 1,
+	V4L2_MPEG_AUDIO_L3_BITRATE_48K  = 2,
+	V4L2_MPEG_AUDIO_L3_BITRATE_56K  = 3,
+	V4L2_MPEG_AUDIO_L3_BITRATE_64K  = 4,
+	V4L2_MPEG_AUDIO_L3_BITRATE_80K  = 5,
+	V4L2_MPEG_AUDIO_L3_BITRATE_96K  = 6,
+	V4L2_MPEG_AUDIO_L3_BITRATE_112K = 7,
+	V4L2_MPEG_AUDIO_L3_BITRATE_128K = 8,
+	V4L2_MPEG_AUDIO_L3_BITRATE_160K = 9,
+	V4L2_MPEG_AUDIO_L3_BITRATE_192K = 10,
+	V4L2_MPEG_AUDIO_L3_BITRATE_224K = 11,
+	V4L2_MPEG_AUDIO_L3_BITRATE_256K = 12,
+	V4L2_MPEG_AUDIO_L3_BITRATE_320K = 13,
+};
+#define V4L2_CID_MPEG_AUDIO_MODE 		(V4L2_CID_MPEG_BASE+105)
+enum v4l2_mpeg_audio_mode {
+	V4L2_MPEG_AUDIO_MODE_STEREO       = 0,
+	V4L2_MPEG_AUDIO_MODE_JOINT_STEREO = 1,
+	V4L2_MPEG_AUDIO_MODE_DUAL         = 2,
+	V4L2_MPEG_AUDIO_MODE_MONO         = 3,
+};
+#define V4L2_CID_MPEG_AUDIO_MODE_EXTENSION 	(V4L2_CID_MPEG_BASE+106)
+enum v4l2_mpeg_audio_mode_extension {
+	V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4  = 0,
+	V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_8  = 1,
+	V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_12 = 2,
+	V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_16 = 3,
+};
+#define V4L2_CID_MPEG_AUDIO_EMPHASIS 		(V4L2_CID_MPEG_BASE+107)
+enum v4l2_mpeg_audio_emphasis {
+	V4L2_MPEG_AUDIO_EMPHASIS_NONE         = 0,
+	V4L2_MPEG_AUDIO_EMPHASIS_50_DIV_15_uS = 1,
+	V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17    = 2,
+};
+#define V4L2_CID_MPEG_AUDIO_CRC 		(V4L2_CID_MPEG_BASE+108)
+enum v4l2_mpeg_audio_crc {
+	V4L2_MPEG_AUDIO_CRC_NONE  = 0,
+	V4L2_MPEG_AUDIO_CRC_CRC16 = 1,
+};
+#define V4L2_CID_MPEG_AUDIO_MUTE 		(V4L2_CID_MPEG_BASE+109)
+#define V4L2_CID_MPEG_AUDIO_AAC_BITRATE		(V4L2_CID_MPEG_BASE+110)
+#define V4L2_CID_MPEG_AUDIO_AC3_BITRATE		(V4L2_CID_MPEG_BASE+111)
+enum v4l2_mpeg_audio_ac3_bitrate {
+	V4L2_MPEG_AUDIO_AC3_BITRATE_32K  = 0,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_40K  = 1,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_48K  = 2,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_56K  = 3,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_64K  = 4,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_80K  = 5,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_96K  = 6,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_112K = 7,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_128K = 8,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_160K = 9,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_192K = 10,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_224K = 11,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_256K = 12,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_320K = 13,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_384K = 14,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_448K = 15,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_512K = 16,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_576K = 17,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_640K = 18,
+};
+#define V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK	(V4L2_CID_MPEG_BASE+112)
+enum v4l2_mpeg_audio_dec_playback {
+	V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO	    = 0,
+	V4L2_MPEG_AUDIO_DEC_PLAYBACK_STEREO	    = 1,
+	V4L2_MPEG_AUDIO_DEC_PLAYBACK_LEFT	    = 2,
+	V4L2_MPEG_AUDIO_DEC_PLAYBACK_RIGHT	    = 3,
+	V4L2_MPEG_AUDIO_DEC_PLAYBACK_MONO	    = 4,
+	V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO = 5,
+};
+#define V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK (V4L2_CID_MPEG_BASE+113)
+
+/*  MPEG video controls specific to multiplexed streams */
+#define V4L2_CID_MPEG_VIDEO_ENCODING 		(V4L2_CID_MPEG_BASE+200)
+enum v4l2_mpeg_video_encoding {
+	V4L2_MPEG_VIDEO_ENCODING_MPEG_1     = 0,
+	V4L2_MPEG_VIDEO_ENCODING_MPEG_2     = 1,
+	V4L2_MPEG_VIDEO_ENCODING_MPEG_4_AVC = 2,
+};
+#define V4L2_CID_MPEG_VIDEO_ASPECT 		(V4L2_CID_MPEG_BASE+201)
+enum v4l2_mpeg_video_aspect {
+	V4L2_MPEG_VIDEO_ASPECT_1x1     = 0,
+	V4L2_MPEG_VIDEO_ASPECT_4x3     = 1,
+	V4L2_MPEG_VIDEO_ASPECT_16x9    = 2,
+	V4L2_MPEG_VIDEO_ASPECT_221x100 = 3,
+};
+#define V4L2_CID_MPEG_VIDEO_B_FRAMES 		(V4L2_CID_MPEG_BASE+202)
+#define V4L2_CID_MPEG_VIDEO_GOP_SIZE 		(V4L2_CID_MPEG_BASE+203)
+#define V4L2_CID_MPEG_VIDEO_GOP_CLOSURE 	(V4L2_CID_MPEG_BASE+204)
+#define V4L2_CID_MPEG_VIDEO_PULLDOWN 		(V4L2_CID_MPEG_BASE+205)
+#define V4L2_CID_MPEG_VIDEO_BITRATE_MODE 	(V4L2_CID_MPEG_BASE+206)
+enum v4l2_mpeg_video_bitrate_mode {
+	V4L2_MPEG_VIDEO_BITRATE_MODE_VBR = 0,
+	V4L2_MPEG_VIDEO_BITRATE_MODE_CBR = 1,
+};
+#define V4L2_CID_MPEG_VIDEO_BITRATE 		(V4L2_CID_MPEG_BASE+207)
+#define V4L2_CID_MPEG_VIDEO_BITRATE_PEAK 	(V4L2_CID_MPEG_BASE+208)
+#define V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION (V4L2_CID_MPEG_BASE+209)
+#define V4L2_CID_MPEG_VIDEO_MUTE 		(V4L2_CID_MPEG_BASE+210)
+#define V4L2_CID_MPEG_VIDEO_MUTE_YUV 		(V4L2_CID_MPEG_BASE+211)
+#define V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE		(V4L2_CID_MPEG_BASE+212)
+#define V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER	(V4L2_CID_MPEG_BASE+213)
+#define V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB		(V4L2_CID_MPEG_BASE+214)
+#define V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE			(V4L2_CID_MPEG_BASE+215)
+#define V4L2_CID_MPEG_VIDEO_HEADER_MODE				(V4L2_CID_MPEG_BASE+216)
+enum v4l2_mpeg_video_header_mode {
+	V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE			= 0,
+	V4L2_MPEG_VIDEO_HEADER_MODE_JOINED_WITH_1ST_FRAME	= 1,
+
+};
+#define V4L2_CID_MPEG_VIDEO_MAX_REF_PIC			(V4L2_CID_MPEG_BASE+217)
+#define V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE		(V4L2_CID_MPEG_BASE+218)
+#define V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_BYTES	(V4L2_CID_MPEG_BASE+219)
+#define V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB		(V4L2_CID_MPEG_BASE+220)
+#define V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE		(V4L2_CID_MPEG_BASE+221)
+enum v4l2_mpeg_video_multi_slice_mode {
+	V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_SINGLE		= 0,
+	V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_MB		= 1,
+	V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_BYTES	= 2,
+};
+#define V4L2_CID_MPEG_VIDEO_VBV_SIZE			(V4L2_CID_MPEG_BASE+222)
+#define V4L2_CID_MPEG_VIDEO_DEC_PTS			(V4L2_CID_MPEG_BASE+223)
+#define V4L2_CID_MPEG_VIDEO_DEC_FRAME			(V4L2_CID_MPEG_BASE+224)
+#define V4L2_CID_MPEG_VIDEO_VBV_DELAY			(V4L2_CID_MPEG_BASE+225)
+
+#define V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP		(V4L2_CID_MPEG_BASE+300)
+#define V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP		(V4L2_CID_MPEG_BASE+301)
+#define V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP		(V4L2_CID_MPEG_BASE+302)
+#define V4L2_CID_MPEG_VIDEO_H263_MIN_QP			(V4L2_CID_MPEG_BASE+303)
+#define V4L2_CID_MPEG_VIDEO_H263_MAX_QP			(V4L2_CID_MPEG_BASE+304)
+#define V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP		(V4L2_CID_MPEG_BASE+350)
+#define V4L2_CID_MPEG_VIDEO_H264_P_FRAME_QP		(V4L2_CID_MPEG_BASE+351)
+#define V4L2_CID_MPEG_VIDEO_H264_B_FRAME_QP		(V4L2_CID_MPEG_BASE+352)
+#define V4L2_CID_MPEG_VIDEO_H264_MIN_QP			(V4L2_CID_MPEG_BASE+353)
+#define V4L2_CID_MPEG_VIDEO_H264_MAX_QP			(V4L2_CID_MPEG_BASE+354)
+#define V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM		(V4L2_CID_MPEG_BASE+355)
+#define V4L2_CID_MPEG_VIDEO_H264_CPB_SIZE		(V4L2_CID_MPEG_BASE+356)
+#define V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE		(V4L2_CID_MPEG_BASE+357)
+enum v4l2_mpeg_video_h264_entropy_mode {
+	V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CAVLC	= 0,
+	V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CABAC	= 1,
+};
+#define V4L2_CID_MPEG_VIDEO_H264_I_PERIOD		(V4L2_CID_MPEG_BASE+358)
+#define V4L2_CID_MPEG_VIDEO_H264_LEVEL			(V4L2_CID_MPEG_BASE+359)
+enum v4l2_mpeg_video_h264_level {
+	V4L2_MPEG_VIDEO_H264_LEVEL_1_0	= 0,
+	V4L2_MPEG_VIDEO_H264_LEVEL_1B	= 1,
+	V4L2_MPEG_VIDEO_H264_LEVEL_1_1	= 2,
+	V4L2_MPEG_VIDEO_H264_LEVEL_1_2	= 3,
+	V4L2_MPEG_VIDEO_H264_LEVEL_1_3	= 4,
+	V4L2_MPEG_VIDEO_H264_LEVEL_2_0	= 5,
+	V4L2_MPEG_VIDEO_H264_LEVEL_2_1	= 6,
+	V4L2_MPEG_VIDEO_H264_LEVEL_2_2	= 7,
+	V4L2_MPEG_VIDEO_H264_LEVEL_3_0	= 8,
+	V4L2_MPEG_VIDEO_H264_LEVEL_3_1	= 9,
+	V4L2_MPEG_VIDEO_H264_LEVEL_3_2	= 10,
+	V4L2_MPEG_VIDEO_H264_LEVEL_4_0	= 11,
+	V4L2_MPEG_VIDEO_H264_LEVEL_4_1	= 12,
+	V4L2_MPEG_VIDEO_H264_LEVEL_4_2	= 13,
+	V4L2_MPEG_VIDEO_H264_LEVEL_5_0	= 14,
+	V4L2_MPEG_VIDEO_H264_LEVEL_5_1	= 15,
+};
+#define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA	(V4L2_CID_MPEG_BASE+360)
+#define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA	(V4L2_CID_MPEG_BASE+361)
+#define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE	(V4L2_CID_MPEG_BASE+362)
+enum v4l2_mpeg_video_h264_loop_filter_mode {
+	V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_ENABLED				= 0,
+	V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED				= 1,
+	V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY	= 2,
+};
+#define V4L2_CID_MPEG_VIDEO_H264_PROFILE		(V4L2_CID_MPEG_BASE+363)
+enum v4l2_mpeg_video_h264_profile {
+	V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE			= 0,
+	V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE	= 1,
+	V4L2_MPEG_VIDEO_H264_PROFILE_MAIN			= 2,
+	V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED			= 3,
+	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH			= 4,
+	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10			= 5,
+	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422			= 6,
+	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_PREDICTIVE	= 7,
+	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10_INTRA		= 8,
+	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422_INTRA		= 9,
+	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_INTRA		= 10,
+	V4L2_MPEG_VIDEO_H264_PROFILE_CAVLC_444_INTRA		= 11,
+	V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_BASELINE		= 12,
+	V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH		= 13,
+	V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH_INTRA	= 14,
+	V4L2_MPEG_VIDEO_H264_PROFILE_STEREO_HIGH		= 15,
+	V4L2_MPEG_VIDEO_H264_PROFILE_MULTIVIEW_HIGH		= 16,
+};
+#define V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_HEIGHT	(V4L2_CID_MPEG_BASE+364)
+#define V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_WIDTH	(V4L2_CID_MPEG_BASE+365)
+#define V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE		(V4L2_CID_MPEG_BASE+366)
+#define V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC		(V4L2_CID_MPEG_BASE+367)
+enum v4l2_mpeg_video_h264_vui_sar_idc {
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED	= 0,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_1x1		= 1,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_12x11		= 2,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_10x11		= 3,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_16x11		= 4,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_40x33		= 5,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_24x11		= 6,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_20x11		= 7,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_32x11		= 8,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_80x33		= 9,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_18x11		= 10,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_15x11		= 11,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_64x33		= 12,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_160x99		= 13,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_4x3		= 14,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_3x2		= 15,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_2x1		= 16,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED	= 17,
+};
+#define V4L2_CID_MPEG_VIDEO_H264_SEI_FRAME_PACKING		(V4L2_CID_MPEG_BASE+368)
+#define V4L2_CID_MPEG_VIDEO_H264_SEI_FP_CURRENT_FRAME_0		(V4L2_CID_MPEG_BASE+369)
+#define V4L2_CID_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE	(V4L2_CID_MPEG_BASE+370)
+enum v4l2_mpeg_video_h264_sei_fp_arrangement_type {
+	V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_CHECKERBOARD	= 0,
+	V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_COLUMN		= 1,
+	V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_ROW		= 2,
+	V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_SIDE_BY_SIDE	= 3,
+	V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_TOP_BOTTOM		= 4,
+	V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_TEMPORAL		= 5,
+};
+#define V4L2_CID_MPEG_VIDEO_H264_FMO			(V4L2_CID_MPEG_BASE+371)
+#define V4L2_CID_MPEG_VIDEO_H264_FMO_MAP_TYPE		(V4L2_CID_MPEG_BASE+372)
+enum v4l2_mpeg_video_h264_fmo_map_type {
+	V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_INTERLEAVED_SLICES		= 0,
+	V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_SCATTERED_SLICES		= 1,
+	V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_FOREGROUND_WITH_LEFT_OVER	= 2,
+	V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_BOX_OUT			= 3,
+	V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_RASTER_SCAN			= 4,
+	V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_WIPE_SCAN			= 5,
+	V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_EXPLICIT			= 6,
+};
+#define V4L2_CID_MPEG_VIDEO_H264_FMO_SLICE_GROUP	(V4L2_CID_MPEG_BASE+373)
+#define V4L2_CID_MPEG_VIDEO_H264_FMO_CHANGE_DIRECTION	(V4L2_CID_MPEG_BASE+374)
+enum v4l2_mpeg_video_h264_fmo_change_dir {
+	V4L2_MPEG_VIDEO_H264_FMO_CHANGE_DIR_RIGHT	= 0,
+	V4L2_MPEG_VIDEO_H264_FMO_CHANGE_DIR_LEFT	= 1,
+};
+#define V4L2_CID_MPEG_VIDEO_H264_FMO_CHANGE_RATE	(V4L2_CID_MPEG_BASE+375)
+#define V4L2_CID_MPEG_VIDEO_H264_FMO_RUN_LENGTH		(V4L2_CID_MPEG_BASE+376)
+#define V4L2_CID_MPEG_VIDEO_H264_ASO			(V4L2_CID_MPEG_BASE+377)
+#define V4L2_CID_MPEG_VIDEO_H264_ASO_SLICE_ORDER	(V4L2_CID_MPEG_BASE+378)
+#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING		(V4L2_CID_MPEG_BASE+379)
+#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_TYPE	(V4L2_CID_MPEG_BASE+380)
+enum v4l2_mpeg_video_h264_hierarchical_coding_type {
+	V4L2_MPEG_VIDEO_H264_HIERARCHICAL_CODING_B	= 0,
+	V4L2_MPEG_VIDEO_H264_HIERARCHICAL_CODING_P	= 1,
+};
+#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER	(V4L2_CID_MPEG_BASE+381)
+#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER_QP	(V4L2_CID_MPEG_BASE+382)
+#define V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP	(V4L2_CID_MPEG_BASE+400)
+#define V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP	(V4L2_CID_MPEG_BASE+401)
+#define V4L2_CID_MPEG_VIDEO_MPEG4_B_FRAME_QP	(V4L2_CID_MPEG_BASE+402)
+#define V4L2_CID_MPEG_VIDEO_MPEG4_MIN_QP	(V4L2_CID_MPEG_BASE+403)
+#define V4L2_CID_MPEG_VIDEO_MPEG4_MAX_QP	(V4L2_CID_MPEG_BASE+404)
+#define V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL		(V4L2_CID_MPEG_BASE+405)
+enum v4l2_mpeg_video_mpeg4_level {
+	V4L2_MPEG_VIDEO_MPEG4_LEVEL_0	= 0,
+	V4L2_MPEG_VIDEO_MPEG4_LEVEL_0B	= 1,
+	V4L2_MPEG_VIDEO_MPEG4_LEVEL_1	= 2,
+	V4L2_MPEG_VIDEO_MPEG4_LEVEL_2	= 3,
+	V4L2_MPEG_VIDEO_MPEG4_LEVEL_3	= 4,
+	V4L2_MPEG_VIDEO_MPEG4_LEVEL_3B	= 5,
+	V4L2_MPEG_VIDEO_MPEG4_LEVEL_4	= 6,
+	V4L2_MPEG_VIDEO_MPEG4_LEVEL_5	= 7,
+};
+#define V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE	(V4L2_CID_MPEG_BASE+406)
+enum v4l2_mpeg_video_mpeg4_profile {
+	V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE				= 0,
+	V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE			= 1,
+	V4L2_MPEG_VIDEO_MPEG4_PROFILE_CORE				= 2,
+	V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE_SCALABLE			= 3,
+	V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_CODING_EFFICIENCY	= 4,
+};
+#define V4L2_CID_MPEG_VIDEO_MPEG4_QPEL		(V4L2_CID_MPEG_BASE+407)
+
+/*  MPEG-class control IDs specific to the CX2341x driver as defined by V4L2 */
+#define V4L2_CID_MPEG_CX2341X_BASE 				(V4L2_CTRL_CLASS_MPEG | 0x1000)
+#define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE 	(V4L2_CID_MPEG_CX2341X_BASE+0)
+enum v4l2_mpeg_cx2341x_video_spatial_filter_mode {
+	V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL = 0,
+	V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO   = 1,
+};
+#define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER 		(V4L2_CID_MPEG_CX2341X_BASE+1)
+#define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE 	(V4L2_CID_MPEG_CX2341X_BASE+2)
+enum v4l2_mpeg_cx2341x_video_luma_spatial_filter_type {
+	V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_OFF                  = 0,
+	V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_HOR               = 1,
+	V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_VERT              = 2,
+	V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_HV_SEPARABLE      = 3,
+	V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_SYM_NON_SEPARABLE = 4,
+};
+#define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE 	(V4L2_CID_MPEG_CX2341X_BASE+3)
+enum v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type {
+	V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_OFF    = 0,
+	V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR = 1,
+};
+#define V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE 	(V4L2_CID_MPEG_CX2341X_BASE+4)
+enum v4l2_mpeg_cx2341x_video_temporal_filter_mode {
+	V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL = 0,
+	V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO   = 1,
+};
+#define V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER 		(V4L2_CID_MPEG_CX2341X_BASE+5)
+#define V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE 		(V4L2_CID_MPEG_CX2341X_BASE+6)
+enum v4l2_mpeg_cx2341x_video_median_filter_type {
+	V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF      = 0,
+	V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR      = 1,
+	V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_VERT     = 2,
+	V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR_VERT = 3,
+	V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG     = 4,
+};
+#define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM 	(V4L2_CID_MPEG_CX2341X_BASE+7)
+#define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP 	(V4L2_CID_MPEG_CX2341X_BASE+8)
+#define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM	(V4L2_CID_MPEG_CX2341X_BASE+9)
+#define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP 	(V4L2_CID_MPEG_CX2341X_BASE+10)
+#define V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS 	(V4L2_CID_MPEG_CX2341X_BASE+11)
+
+/*  MPEG-class control IDs specific to the Samsung MFC 5.1 driver as defined by V4L2 */
+#define V4L2_CID_MPEG_MFC51_BASE				(V4L2_CTRL_CLASS_MPEG | 0x1100)
+
+#define V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY		(V4L2_CID_MPEG_MFC51_BASE+0)
+#define V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY_ENABLE	(V4L2_CID_MPEG_MFC51_BASE+1)
+#define V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE			(V4L2_CID_MPEG_MFC51_BASE+2)
+enum v4l2_mpeg_mfc51_video_frame_skip_mode {
+	V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_DISABLED		= 0,
+	V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_LEVEL_LIMIT	= 1,
+	V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_BUF_LIMIT		= 2,
+};
+#define V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE			(V4L2_CID_MPEG_MFC51_BASE+3)
+enum v4l2_mpeg_mfc51_video_force_frame_type {
+	V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_DISABLED		= 0,
+	V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_I_FRAME		= 1,
+	V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_NOT_CODED	= 2,
+};
+#define V4L2_CID_MPEG_MFC51_VIDEO_PADDING				(V4L2_CID_MPEG_MFC51_BASE+4)
+#define V4L2_CID_MPEG_MFC51_VIDEO_PADDING_YUV				(V4L2_CID_MPEG_MFC51_BASE+5)
+#define V4L2_CID_MPEG_MFC51_VIDEO_RC_FIXED_TARGET_BIT			(V4L2_CID_MPEG_MFC51_BASE+6)
+#define V4L2_CID_MPEG_MFC51_VIDEO_RC_REACTION_COEFF			(V4L2_CID_MPEG_MFC51_BASE+7)
+#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_ACTIVITY		(V4L2_CID_MPEG_MFC51_BASE+50)
+#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_DARK			(V4L2_CID_MPEG_MFC51_BASE+51)
+#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_SMOOTH		(V4L2_CID_MPEG_MFC51_BASE+52)
+#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_STATIC		(V4L2_CID_MPEG_MFC51_BASE+53)
+#define V4L2_CID_MPEG_MFC51_VIDEO_H264_NUM_REF_PIC_FOR_P		(V4L2_CID_MPEG_MFC51_BASE+54)
+
+
+/*  Camera class control IDs */
+
+#define V4L2_CID_CAMERA_CLASS_BASE 	(V4L2_CTRL_CLASS_CAMERA | 0x900)
+#define V4L2_CID_CAMERA_CLASS 		(V4L2_CTRL_CLASS_CAMERA | 1)
+
+#define V4L2_CID_EXPOSURE_AUTO			(V4L2_CID_CAMERA_CLASS_BASE+1)
+enum  v4l2_exposure_auto_type {
+	V4L2_EXPOSURE_AUTO = 0,
+	V4L2_EXPOSURE_MANUAL = 1,
+	V4L2_EXPOSURE_SHUTTER_PRIORITY = 2,
+	V4L2_EXPOSURE_APERTURE_PRIORITY = 3
+};
+#define V4L2_CID_EXPOSURE_ABSOLUTE		(V4L2_CID_CAMERA_CLASS_BASE+2)
+#define V4L2_CID_EXPOSURE_AUTO_PRIORITY		(V4L2_CID_CAMERA_CLASS_BASE+3)
+
+#define V4L2_CID_PAN_RELATIVE			(V4L2_CID_CAMERA_CLASS_BASE+4)
+#define V4L2_CID_TILT_RELATIVE			(V4L2_CID_CAMERA_CLASS_BASE+5)
+#define V4L2_CID_PAN_RESET			(V4L2_CID_CAMERA_CLASS_BASE+6)
+#define V4L2_CID_TILT_RESET			(V4L2_CID_CAMERA_CLASS_BASE+7)
+
+#define V4L2_CID_PAN_ABSOLUTE			(V4L2_CID_CAMERA_CLASS_BASE+8)
+#define V4L2_CID_TILT_ABSOLUTE			(V4L2_CID_CAMERA_CLASS_BASE+9)
+
+#define V4L2_CID_FOCUS_ABSOLUTE			(V4L2_CID_CAMERA_CLASS_BASE+10)
+#define V4L2_CID_FOCUS_RELATIVE			(V4L2_CID_CAMERA_CLASS_BASE+11)
+#define V4L2_CID_FOCUS_AUTO			(V4L2_CID_CAMERA_CLASS_BASE+12)
+
+#define V4L2_CID_ZOOM_ABSOLUTE			(V4L2_CID_CAMERA_CLASS_BASE+13)
+#define V4L2_CID_ZOOM_RELATIVE			(V4L2_CID_CAMERA_CLASS_BASE+14)
+#define V4L2_CID_ZOOM_CONTINUOUS		(V4L2_CID_CAMERA_CLASS_BASE+15)
+
+#define V4L2_CID_PRIVACY			(V4L2_CID_CAMERA_CLASS_BASE+16)
+
+#define V4L2_CID_IRIS_ABSOLUTE			(V4L2_CID_CAMERA_CLASS_BASE+17)
+#define V4L2_CID_IRIS_RELATIVE			(V4L2_CID_CAMERA_CLASS_BASE+18)
+
+#define V4L2_CID_AUTO_EXPOSURE_BIAS		(V4L2_CID_CAMERA_CLASS_BASE+19)
+
+#define V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE	(V4L2_CID_CAMERA_CLASS_BASE+20)
+enum v4l2_auto_n_preset_white_balance {
+	V4L2_WHITE_BALANCE_MANUAL		= 0,
+	V4L2_WHITE_BALANCE_AUTO			= 1,
+	V4L2_WHITE_BALANCE_INCANDESCENT		= 2,
+	V4L2_WHITE_BALANCE_FLUORESCENT		= 3,
+	V4L2_WHITE_BALANCE_FLUORESCENT_H	= 4,
+	V4L2_WHITE_BALANCE_HORIZON		= 5,
+	V4L2_WHITE_BALANCE_DAYLIGHT		= 6,
+	V4L2_WHITE_BALANCE_FLASH		= 7,
+	V4L2_WHITE_BALANCE_CLOUDY		= 8,
+	V4L2_WHITE_BALANCE_SHADE		= 9,
+};
+
+#define V4L2_CID_WIDE_DYNAMIC_RANGE		(V4L2_CID_CAMERA_CLASS_BASE+21)
+#define V4L2_CID_IMAGE_STABILIZATION		(V4L2_CID_CAMERA_CLASS_BASE+22)
+
+#define V4L2_CID_ISO_SENSITIVITY		(V4L2_CID_CAMERA_CLASS_BASE+23)
+#define V4L2_CID_ISO_SENSITIVITY_AUTO		(V4L2_CID_CAMERA_CLASS_BASE+24)
+enum v4l2_iso_sensitivity_auto_type {
+	V4L2_ISO_SENSITIVITY_MANUAL		= 0,
+	V4L2_ISO_SENSITIVITY_AUTO		= 1,
+};
+
+#define V4L2_CID_EXPOSURE_METERING		(V4L2_CID_CAMERA_CLASS_BASE+25)
+enum v4l2_exposure_metering {
+	V4L2_EXPOSURE_METERING_AVERAGE		= 0,
+	V4L2_EXPOSURE_METERING_CENTER_WEIGHTED	= 1,
+	V4L2_EXPOSURE_METERING_SPOT		= 2,
+};
+
+#define V4L2_CID_SCENE_MODE			(V4L2_CID_CAMERA_CLASS_BASE+26)
+enum v4l2_scene_mode {
+	V4L2_SCENE_MODE_NONE			= 0,
+	V4L2_SCENE_MODE_BACKLIGHT		= 1,
+	V4L2_SCENE_MODE_BEACH_SNOW		= 2,
+	V4L2_SCENE_MODE_CANDLE_LIGHT		= 3,
+	V4L2_SCENE_MODE_DAWN_DUSK		= 4,
+	V4L2_SCENE_MODE_FALL_COLORS		= 5,
+	V4L2_SCENE_MODE_FIREWORKS		= 6,
+	V4L2_SCENE_MODE_LANDSCAPE		= 7,
+	V4L2_SCENE_MODE_NIGHT			= 8,
+	V4L2_SCENE_MODE_PARTY_INDOOR		= 9,
+	V4L2_SCENE_MODE_PORTRAIT		= 10,
+	V4L2_SCENE_MODE_SPORTS			= 11,
+	V4L2_SCENE_MODE_SUNSET			= 12,
+	V4L2_SCENE_MODE_TEXT			= 13,
+};
+
+#define V4L2_CID_3A_LOCK			(V4L2_CID_CAMERA_CLASS_BASE+27)
+#define V4L2_LOCK_EXPOSURE			(1 << 0)
+#define V4L2_LOCK_WHITE_BALANCE			(1 << 1)
+#define V4L2_LOCK_FOCUS				(1 << 2)
+
+#define V4L2_CID_AUTO_FOCUS_START		(V4L2_CID_CAMERA_CLASS_BASE+28)
+#define V4L2_CID_AUTO_FOCUS_STOP		(V4L2_CID_CAMERA_CLASS_BASE+29)
+#define V4L2_CID_AUTO_FOCUS_STATUS		(V4L2_CID_CAMERA_CLASS_BASE+30)
+#define V4L2_AUTO_FOCUS_STATUS_IDLE		(0 << 0)
+#define V4L2_AUTO_FOCUS_STATUS_BUSY		(1 << 0)
+#define V4L2_AUTO_FOCUS_STATUS_REACHED		(1 << 1)
+#define V4L2_AUTO_FOCUS_STATUS_FAILED		(1 << 2)
+
+#define V4L2_CID_AUTO_FOCUS_RANGE		(V4L2_CID_CAMERA_CLASS_BASE+31)
+enum v4l2_auto_focus_range {
+	V4L2_AUTO_FOCUS_RANGE_AUTO		= 0,
+	V4L2_AUTO_FOCUS_RANGE_NORMAL		= 1,
+	V4L2_AUTO_FOCUS_RANGE_MACRO		= 2,
+	V4L2_AUTO_FOCUS_RANGE_INFINITY		= 3,
+};
+
+
+/* FM Modulator class control IDs */
+
+#define V4L2_CID_FM_TX_CLASS_BASE		(V4L2_CTRL_CLASS_FM_TX | 0x900)
+#define V4L2_CID_FM_TX_CLASS			(V4L2_CTRL_CLASS_FM_TX | 1)
+
+#define V4L2_CID_RDS_TX_DEVIATION		(V4L2_CID_FM_TX_CLASS_BASE + 1)
+#define V4L2_CID_RDS_TX_PI			(V4L2_CID_FM_TX_CLASS_BASE + 2)
+#define V4L2_CID_RDS_TX_PTY			(V4L2_CID_FM_TX_CLASS_BASE + 3)
+#define V4L2_CID_RDS_TX_PS_NAME			(V4L2_CID_FM_TX_CLASS_BASE + 5)
+#define V4L2_CID_RDS_TX_RADIO_TEXT		(V4L2_CID_FM_TX_CLASS_BASE + 6)
+
+#define V4L2_CID_AUDIO_LIMITER_ENABLED		(V4L2_CID_FM_TX_CLASS_BASE + 64)
+#define V4L2_CID_AUDIO_LIMITER_RELEASE_TIME	(V4L2_CID_FM_TX_CLASS_BASE + 65)
+#define V4L2_CID_AUDIO_LIMITER_DEVIATION	(V4L2_CID_FM_TX_CLASS_BASE + 66)
+
+#define V4L2_CID_AUDIO_COMPRESSION_ENABLED	(V4L2_CID_FM_TX_CLASS_BASE + 80)
+#define V4L2_CID_AUDIO_COMPRESSION_GAIN		(V4L2_CID_FM_TX_CLASS_BASE + 81)
+#define V4L2_CID_AUDIO_COMPRESSION_THRESHOLD	(V4L2_CID_FM_TX_CLASS_BASE + 82)
+#define V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME	(V4L2_CID_FM_TX_CLASS_BASE + 83)
+#define V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME	(V4L2_CID_FM_TX_CLASS_BASE + 84)
+
+#define V4L2_CID_PILOT_TONE_ENABLED		(V4L2_CID_FM_TX_CLASS_BASE + 96)
+#define V4L2_CID_PILOT_TONE_DEVIATION		(V4L2_CID_FM_TX_CLASS_BASE + 97)
+#define V4L2_CID_PILOT_TONE_FREQUENCY		(V4L2_CID_FM_TX_CLASS_BASE + 98)
+
+#define V4L2_CID_TUNE_PREEMPHASIS		(V4L2_CID_FM_TX_CLASS_BASE + 112)
+enum v4l2_preemphasis {
+	V4L2_PREEMPHASIS_DISABLED	= 0,
+	V4L2_PREEMPHASIS_50_uS		= 1,
+	V4L2_PREEMPHASIS_75_uS		= 2,
+};
+#define V4L2_CID_TUNE_POWER_LEVEL		(V4L2_CID_FM_TX_CLASS_BASE + 113)
+#define V4L2_CID_TUNE_ANTENNA_CAPACITOR		(V4L2_CID_FM_TX_CLASS_BASE + 114)
+
+
+/* Flash and privacy (indicator) light controls */
+
+#define V4L2_CID_FLASH_CLASS_BASE		(V4L2_CTRL_CLASS_FLASH | 0x900)
+#define V4L2_CID_FLASH_CLASS			(V4L2_CTRL_CLASS_FLASH | 1)
+
+#define V4L2_CID_FLASH_LED_MODE			(V4L2_CID_FLASH_CLASS_BASE + 1)
+enum v4l2_flash_led_mode {
+	V4L2_FLASH_LED_MODE_NONE,
+	V4L2_FLASH_LED_MODE_FLASH,
+	V4L2_FLASH_LED_MODE_TORCH,
+};
+
+#define V4L2_CID_FLASH_STROBE_SOURCE		(V4L2_CID_FLASH_CLASS_BASE + 2)
+enum v4l2_flash_strobe_source {
+	V4L2_FLASH_STROBE_SOURCE_SOFTWARE,
+	V4L2_FLASH_STROBE_SOURCE_EXTERNAL,
+};
+
+#define V4L2_CID_FLASH_STROBE			(V4L2_CID_FLASH_CLASS_BASE + 3)
+#define V4L2_CID_FLASH_STROBE_STOP		(V4L2_CID_FLASH_CLASS_BASE + 4)
+#define V4L2_CID_FLASH_STROBE_STATUS		(V4L2_CID_FLASH_CLASS_BASE + 5)
+
+#define V4L2_CID_FLASH_TIMEOUT			(V4L2_CID_FLASH_CLASS_BASE + 6)
+#define V4L2_CID_FLASH_INTENSITY		(V4L2_CID_FLASH_CLASS_BASE + 7)
+#define V4L2_CID_FLASH_TORCH_INTENSITY		(V4L2_CID_FLASH_CLASS_BASE + 8)
+#define V4L2_CID_FLASH_INDICATOR_INTENSITY	(V4L2_CID_FLASH_CLASS_BASE + 9)
+
+#define V4L2_CID_FLASH_FAULT			(V4L2_CID_FLASH_CLASS_BASE + 10)
+#define V4L2_FLASH_FAULT_OVER_VOLTAGE		(1 << 0)
+#define V4L2_FLASH_FAULT_TIMEOUT		(1 << 1)
+#define V4L2_FLASH_FAULT_OVER_TEMPERATURE	(1 << 2)
+#define V4L2_FLASH_FAULT_SHORT_CIRCUIT		(1 << 3)
+#define V4L2_FLASH_FAULT_OVER_CURRENT		(1 << 4)
+#define V4L2_FLASH_FAULT_INDICATOR		(1 << 5)
+
+#define V4L2_CID_FLASH_CHARGE			(V4L2_CID_FLASH_CLASS_BASE + 11)
+#define V4L2_CID_FLASH_READY			(V4L2_CID_FLASH_CLASS_BASE + 12)
+
+
+/* JPEG-class control IDs */
+
+#define V4L2_CID_JPEG_CLASS_BASE		(V4L2_CTRL_CLASS_JPEG | 0x900)
+#define V4L2_CID_JPEG_CLASS			(V4L2_CTRL_CLASS_JPEG | 1)
+
+#define	V4L2_CID_JPEG_CHROMA_SUBSAMPLING	(V4L2_CID_JPEG_CLASS_BASE + 1)
+enum v4l2_jpeg_chroma_subsampling {
+	V4L2_JPEG_CHROMA_SUBSAMPLING_444	= 0,
+	V4L2_JPEG_CHROMA_SUBSAMPLING_422	= 1,
+	V4L2_JPEG_CHROMA_SUBSAMPLING_420	= 2,
+	V4L2_JPEG_CHROMA_SUBSAMPLING_411	= 3,
+	V4L2_JPEG_CHROMA_SUBSAMPLING_410	= 4,
+	V4L2_JPEG_CHROMA_SUBSAMPLING_GRAY	= 5,
+};
+#define	V4L2_CID_JPEG_RESTART_INTERVAL		(V4L2_CID_JPEG_CLASS_BASE + 2)
+#define	V4L2_CID_JPEG_COMPRESSION_QUALITY	(V4L2_CID_JPEG_CLASS_BASE + 3)
+
+#define	V4L2_CID_JPEG_ACTIVE_MARKER		(V4L2_CID_JPEG_CLASS_BASE + 4)
+#define	V4L2_JPEG_ACTIVE_MARKER_APP0		(1 << 0)
+#define	V4L2_JPEG_ACTIVE_MARKER_APP1		(1 << 1)
+#define	V4L2_JPEG_ACTIVE_MARKER_COM		(1 << 16)
+#define	V4L2_JPEG_ACTIVE_MARKER_DQT		(1 << 17)
+#define	V4L2_JPEG_ACTIVE_MARKER_DHT		(1 << 18)
+
+/* Image source controls */
+#define V4L2_CID_IMAGE_SOURCE_CLASS_BASE	(V4L2_CTRL_CLASS_IMAGE_SOURCE | 0x900)
+#define V4L2_CID_IMAGE_SOURCE_CLASS		(V4L2_CTRL_CLASS_IMAGE_SOURCE | 1)
+
+#define V4L2_CID_VBLANK				(V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 1)
+#define V4L2_CID_HBLANK				(V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 2)
+#define V4L2_CID_ANALOGUE_GAIN			(V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 3)
+
+
+/* Image processing controls */
+
+#define V4L2_CID_IMAGE_PROC_CLASS_BASE		(V4L2_CTRL_CLASS_IMAGE_PROC | 0x900)
+#define V4L2_CID_IMAGE_PROC_CLASS		(V4L2_CTRL_CLASS_IMAGE_PROC | 1)
+
+#define V4L2_CID_LINK_FREQ			(V4L2_CID_IMAGE_PROC_CLASS_BASE + 1)
+#define V4L2_CID_PIXEL_RATE			(V4L2_CID_IMAGE_PROC_CLASS_BASE + 2)
+#define V4L2_CID_TEST_PATTERN			(V4L2_CID_IMAGE_PROC_CLASS_BASE + 3)
+
+#endif
diff --git a/include/uapi/linux/v4l2-dv-timings.h b/include/uapi/linux/v4l2-dv-timings.h
new file mode 100644
index 00000000000..9ef8172e5ed
--- /dev/null
+++ b/include/uapi/linux/v4l2-dv-timings.h
@@ -0,0 +1,816 @@
+/*
+ * V4L2 DV timings header.
+ *
+ * Copyright (C) 2012  Hans Verkuil <hans.verkuil@cisco.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef _V4L2_DV_TIMINGS_H
+#define _V4L2_DV_TIMINGS_H
+
+#if __GNUC__ < 4 || (__GNUC__ == 4 && (__GNUC_MINOR__ < 6))
+/* Sadly gcc versions older than 4.6 have a bug in how they initialize
+   anonymous unions where they require additional curly brackets.
+   This violates the C1x standard. This workaround adds the curly brackets
+   if needed. */
+#define V4L2_INIT_BT_TIMINGS(_width, args...) \
+	{ .bt = { _width , ## args } }
+#else
+#define V4L2_INIT_BT_TIMINGS(_width, args...) \
+	.bt = { _width , ## args }
+#endif
+
+/* CEA-861-E timings (i.e. standard HDTV timings) */
+
+#define V4L2_DV_BT_CEA_640X480P59_94 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(640, 480, 0, 0, \
+		25175000, 16, 96, 48, 10, 2, 33, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CEA861, 0) \
+}
+
+#define V4L2_DV_BT_CEA_720X480P59_94 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(720, 480, 0, 0, \
+		27000000, 16, 62, 60, 9, 6, 30, 0, 0, 0, \
+		V4L2_DV_BT_STD_CEA861, 0) \
+}
+
+#define V4L2_DV_BT_CEA_720X576P50 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(720, 576, 0, 0, \
+		27000000, 12, 64, 68, 5, 5, 39, 0, 0, 0, \
+		V4L2_DV_BT_STD_CEA861, 0) \
+}
+
+#define V4L2_DV_BT_CEA_1280X720P24 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1280, 720, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		59400000, 1760, 40, 220, 5, 5, 20, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CEA861, \
+		V4L2_DV_FL_CAN_REDUCE_FPS) \
+}
+
+#define V4L2_DV_BT_CEA_1280X720P25 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1280, 720, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		74250000, 2420, 40, 220, 5, 5, 20, 0, 0, 0, \
+		V4L2_DV_BT_STD_CEA861, 0) \
+}
+
+#define V4L2_DV_BT_CEA_1280X720P30 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1280, 720, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		74250000, 1760, 40, 220, 5, 5, 20, 0, 0, 0, \
+		V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_CAN_REDUCE_FPS) \
+}
+
+#define V4L2_DV_BT_CEA_1280X720P50 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1280, 720, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		74250000, 440, 40, 220, 5, 5, 20, 0, 0, 0, \
+		V4L2_DV_BT_STD_CEA861, 0) \
+}
+
+#define V4L2_DV_BT_CEA_1280X720P60 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1280, 720, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		74250000, 110, 40, 220, 5, 5, 20, 0, 0, 0, \
+		V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_CAN_REDUCE_FPS) \
+}
+
+#define V4L2_DV_BT_CEA_1920X1080P24 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1920, 1080, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		74250000, 638, 44, 148, 4, 5, 36, 0, 0, 0, \
+		V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_CAN_REDUCE_FPS) \
+}
+
+#define V4L2_DV_BT_CEA_1920X1080P25 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1920, 1080, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		74250000, 528, 44, 148, 4, 5, 36, 0, 0, 0, \
+		V4L2_DV_BT_STD_CEA861, 0) \
+}
+
+#define V4L2_DV_BT_CEA_1920X1080P30 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1920, 1080, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		74250000, 88, 44, 148, 4, 5, 36, 0, 0, 0, \
+		V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_CAN_REDUCE_FPS) \
+}
+
+#define V4L2_DV_BT_CEA_1920X1080I50 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1920, 1080, 1, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		74250000, 528, 44, 148, 2, 5, 15, 2, 5, 16, \
+		V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_HALF_LINE) \
+}
+
+#define V4L2_DV_BT_CEA_1920X1080P50 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1920, 1080, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		148500000, 528, 44, 148, 4, 5, 36, 0, 0, 0, \
+		V4L2_DV_BT_STD_CEA861, 0) \
+}
+
+#define V4L2_DV_BT_CEA_1920X1080I60 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1920, 1080, 1, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		74250000, 88, 44, 148, 2, 5, 15, 2, 5, 16, \
+		V4L2_DV_BT_STD_CEA861, \
+		V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_HALF_LINE) \
+}
+
+#define V4L2_DV_BT_CEA_1920X1080P60 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1920, 1080, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		148500000, 88, 44, 148, 4, 5, 36, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CEA861, \
+		V4L2_DV_FL_CAN_REDUCE_FPS) \
+}
+
+
+/* VESA Discrete Monitor Timings as per version 1.0, revision 12 */
+
+#define V4L2_DV_BT_DMT_640X350P85 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(640, 350, 0, V4L2_DV_HSYNC_POS_POL, \
+		31500000, 32, 64, 96, 32, 3, 60, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_640X400P85 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(640, 400, 0, V4L2_DV_VSYNC_POS_POL, \
+		31500000, 32, 64, 96, 1, 3, 41, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_720X400P85 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(720, 400, 0, V4L2_DV_VSYNC_POS_POL, \
+		35500000, 36, 72, 108, 1, 3, 42, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+/* VGA resolutions */
+#define V4L2_DV_BT_DMT_640X480P60 V4L2_DV_BT_CEA_640X480P59_94
+
+#define V4L2_DV_BT_DMT_640X480P72 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(640, 480, 0, 0, \
+		31500000, 24, 40, 128, 9, 3, 28, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_640X480P75 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(640, 480, 0, 0, \
+		31500000, 16, 64, 120, 1, 3, 16, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_640X480P85 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(640, 480, 0, 0, \
+		36000000, 56, 56, 80, 1, 3, 25, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+/* SVGA resolutions */
+#define V4L2_DV_BT_DMT_800X600P56 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(800, 600, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		36000000, 24, 72, 128, 1, 2, 22, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_800X600P60 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(800, 600, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		40000000, 40, 128, 88, 1, 4, 23, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_800X600P72 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(800, 600, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		50000000, 56, 120, 64, 37, 6, 23, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_800X600P75 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(800, 600, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		49500000, 16, 80, 160, 1, 3, 21, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_800X600P85 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(800, 600, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		56250000, 32, 64, 152, 1, 3, 27, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_800X600P120_RB { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(800, 600, 0, V4L2_DV_HSYNC_POS_POL, \
+		73250000, 48, 32, 80, 3, 4, 29, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
+		V4L2_DV_FL_REDUCED_BLANKING) \
+}
+
+#define V4L2_DV_BT_DMT_848X480P60 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(848, 480, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		33750000, 16, 112, 112, 6, 8, 23, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1024X768I43 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1024, 768, 1, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		44900000, 8, 176, 56, 0, 4, 20, 0, 4, 21, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+/* XGA resolutions */
+#define V4L2_DV_BT_DMT_1024X768P60 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1024, 768, 0, 0, \
+		65000000, 24, 136, 160, 3, 6, 29, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1024X768P70 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1024, 768, 0, 0, \
+		75000000, 24, 136, 144, 3, 6, 29, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1024X768P75 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1024, 768, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		78750000, 16, 96, 176, 1, 3, 28, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1024X768P85 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1024, 768, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		94500000, 48, 96, 208, 1, 3, 36, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1024X768P120_RB { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1024, 768, 0, V4L2_DV_HSYNC_POS_POL, \
+		115500000, 48, 32, 80, 3, 4, 38, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
+		V4L2_DV_FL_REDUCED_BLANKING) \
+}
+
+/* XGA+ resolution */
+#define V4L2_DV_BT_DMT_1152X864P75 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1152, 864, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		108000000, 64, 128, 256, 1, 3, 32, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1280X720P60 V4L2_DV_BT_CEA_1280X720P60
+
+/* WXGA resolutions */
+#define V4L2_DV_BT_DMT_1280X768P60_RB { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1280, 768, 0, V4L2_DV_HSYNC_POS_POL, \
+		68250000, 48, 32, 80, 3, 7, 12, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
+		V4L2_DV_FL_REDUCED_BLANKING) \
+}
+
+#define V4L2_DV_BT_DMT_1280X768P60 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1280, 768, 0, V4L2_DV_VSYNC_POS_POL, \
+		79500000, 64, 128, 192, 3, 7, 20, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1280X768P75 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1280, 768, 0, V4L2_DV_VSYNC_POS_POL, \
+		102250000, 80, 128, 208, 3, 7, 27, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1280X768P85 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1280, 768, 0, V4L2_DV_VSYNC_POS_POL, \
+		117500000, 80, 136, 216, 3, 7, 31, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1280X768P120_RB { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1280, 768, 0, V4L2_DV_HSYNC_POS_POL, \
+		140250000, 48, 32, 80, 3, 7, 35, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
+		V4L2_DV_FL_REDUCED_BLANKING) \
+}
+
+#define V4L2_DV_BT_DMT_1280X800P60_RB { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1280, 800, 0, V4L2_DV_HSYNC_POS_POL, \
+		71000000, 48, 32, 80, 3, 6, 14, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
+		V4L2_DV_FL_REDUCED_BLANKING) \
+}
+
+#define V4L2_DV_BT_DMT_1280X800P60 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1280, 800, 0, V4L2_DV_VSYNC_POS_POL, \
+		83500000, 72, 128, 200, 3, 6, 22, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1280X800P75 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1280, 800, 0, V4L2_DV_VSYNC_POS_POL, \
+		106500000, 80, 128, 208, 3, 6, 29, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1280X800P85 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1280, 800, 0, V4L2_DV_VSYNC_POS_POL, \
+		122500000, 80, 136, 216, 3, 6, 34, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1280X800P120_RB { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1280, 800, 0, V4L2_DV_HSYNC_POS_POL, \
+		146250000, 48, 32, 80, 3, 6, 38, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
+		V4L2_DV_FL_REDUCED_BLANKING) \
+}
+
+#define V4L2_DV_BT_DMT_1280X960P60 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1280, 960, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		108000000, 96, 112, 312, 1, 3, 36, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1280X960P85 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1280, 960, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		148500000, 64, 160, 224, 1, 3, 47, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1280X960P120_RB { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1280, 960, 0, V4L2_DV_HSYNC_POS_POL, \
+		175500000, 48, 32, 80, 3, 4, 50, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
+		V4L2_DV_FL_REDUCED_BLANKING) \
+}
+
+/* SXGA resolutions */
+#define V4L2_DV_BT_DMT_1280X1024P60 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1280, 1024, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		108000000, 48, 112, 248, 1, 3, 38, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1280X1024P75 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1280, 1024, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		135000000, 16, 144, 248, 1, 3, 38, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1280X1024P85 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1280, 1024, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		157500000, 64, 160, 224, 1, 3, 44, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1280X1024P120_RB { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1280, 1024, 0, V4L2_DV_HSYNC_POS_POL, \
+		187250000, 48, 32, 80, 3, 7, 50, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
+		V4L2_DV_FL_REDUCED_BLANKING) \
+}
+
+#define V4L2_DV_BT_DMT_1360X768P60 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1360, 768, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		85500000, 64, 112, 256, 3, 6, 18, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1360X768P120_RB { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1360, 768, 0, V4L2_DV_HSYNC_POS_POL, \
+		148250000, 48, 32, 80, 3, 5, 37, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
+		V4L2_DV_FL_REDUCED_BLANKING) \
+}
+
+#define V4L2_DV_BT_DMT_1366X768P60 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1366, 768, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		85500000, 70, 143, 213, 3, 3, 24, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1366X768P60_RB { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1366, 768, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		72000000, 14, 56, 64, 1, 3, 28, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, V4L2_DV_FL_REDUCED_BLANKING) \
+}
+
+/* SXGA+ resolutions */
+#define V4L2_DV_BT_DMT_1400X1050P60_RB { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1400, 1050, 0, V4L2_DV_HSYNC_POS_POL, \
+		101000000, 48, 32, 80, 3, 4, 23, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
+		V4L2_DV_FL_REDUCED_BLANKING) \
+}
+
+#define V4L2_DV_BT_DMT_1400X1050P60 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1400, 1050, 0, V4L2_DV_VSYNC_POS_POL, \
+		121750000, 88, 144, 232, 3, 4, 32, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1400X1050P75 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1400, 1050, 0, V4L2_DV_VSYNC_POS_POL, \
+		156000000, 104, 144, 248, 3, 4, 42, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1400X1050P85 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1400, 1050, 0, V4L2_DV_VSYNC_POS_POL, \
+		179500000, 104, 152, 256, 3, 4, 48, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1400X1050P120_RB { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1400, 1050, 0, V4L2_DV_HSYNC_POS_POL, \
+		208000000, 48, 32, 80, 3, 4, 55, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
+		V4L2_DV_FL_REDUCED_BLANKING) \
+}
+
+/* WXGA+ resolutions */
+#define V4L2_DV_BT_DMT_1440X900P60_RB { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1440, 900, 0, V4L2_DV_HSYNC_POS_POL, \
+		88750000, 48, 32, 80, 3, 6, 17, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
+		V4L2_DV_FL_REDUCED_BLANKING) \
+}
+
+#define V4L2_DV_BT_DMT_1440X900P60 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1440, 900, 0, V4L2_DV_VSYNC_POS_POL, \
+		106500000, 80, 152, 232, 3, 6, 25, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1440X900P75 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1440, 900, 0, V4L2_DV_VSYNC_POS_POL, \
+		136750000, 96, 152, 248, 3, 6, 33, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1440X900P85 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1440, 900, 0, V4L2_DV_VSYNC_POS_POL, \
+		157000000, 104, 152, 256, 3, 6, 39, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1440X900P120_RB { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1440, 900, 0, V4L2_DV_HSYNC_POS_POL, \
+		182750000, 48, 32, 80, 3, 6, 44, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
+		V4L2_DV_FL_REDUCED_BLANKING) \
+}
+
+#define V4L2_DV_BT_DMT_1600X900P60_RB { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1600, 900, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		108000000, 24, 80, 96, 1, 3, 96, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, V4L2_DV_FL_REDUCED_BLANKING) \
+}
+
+/* UXGA resolutions */
+#define V4L2_DV_BT_DMT_1600X1200P60 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1600, 1200, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		162000000, 64, 192, 304, 1, 3, 46, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1600X1200P65 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1600, 1200, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		175500000, 64, 192, 304, 1, 3, 46, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1600X1200P70 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1600, 1200, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		189000000, 64, 192, 304, 1, 3, 46, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1600X1200P75 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1600, 1200, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		202500000, 64, 192, 304, 1, 3, 46, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1600X1200P85 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1600, 1200, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		229500000, 64, 192, 304, 1, 3, 46, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1600X1200P120_RB { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1600, 1200, 0, V4L2_DV_HSYNC_POS_POL, \
+		268250000, 48, 32, 80, 3, 4, 64, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
+		V4L2_DV_FL_REDUCED_BLANKING) \
+}
+
+/* WSXGA+ resolutions */
+#define V4L2_DV_BT_DMT_1680X1050P60_RB { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1680, 1050, 0, V4L2_DV_HSYNC_POS_POL, \
+		119000000, 48, 32, 80, 3, 6, 21, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
+		V4L2_DV_FL_REDUCED_BLANKING) \
+}
+
+#define V4L2_DV_BT_DMT_1680X1050P60 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1680, 1050, 0, V4L2_DV_VSYNC_POS_POL, \
+		146250000, 104, 176, 280, 3, 6, 30, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1680X1050P75 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1680, 1050, 0, V4L2_DV_VSYNC_POS_POL, \
+		187000000, 120, 176, 296, 3, 6, 40, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1680X1050P85 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1680, 1050, 0, V4L2_DV_VSYNC_POS_POL, \
+		214750000, 128, 176, 304, 3, 6, 46, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1680X1050P120_RB { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1680, 1050, 0, V4L2_DV_HSYNC_POS_POL, \
+		245500000, 48, 32, 80, 3, 6, 53, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
+		V4L2_DV_FL_REDUCED_BLANKING) \
+}
+
+#define V4L2_DV_BT_DMT_1792X1344P60 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1792, 1344, 0, V4L2_DV_VSYNC_POS_POL, \
+		204750000, 128, 200, 328, 1, 3, 46, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1792X1344P75 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1792, 1344, 0, V4L2_DV_VSYNC_POS_POL, \
+		261000000, 96, 216, 352, 1, 3, 69, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1792X1344P120_RB { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1792, 1344, 0, V4L2_DV_HSYNC_POS_POL, \
+		333250000, 48, 32, 80, 3, 4, 72, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
+		V4L2_DV_FL_REDUCED_BLANKING) \
+}
+
+#define V4L2_DV_BT_DMT_1856X1392P60 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1856, 1392, 0, V4L2_DV_VSYNC_POS_POL, \
+		218250000, 96, 224, 352, 1, 3, 43, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1856X1392P75 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1856, 1392, 0, V4L2_DV_VSYNC_POS_POL, \
+		288000000, 128, 224, 352, 1, 3, 104, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1856X1392P120_RB { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1856, 1392, 0, V4L2_DV_HSYNC_POS_POL, \
+		356500000, 48, 32, 80, 3, 4, 75, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
+		V4L2_DV_FL_REDUCED_BLANKING) \
+}
+
+#define V4L2_DV_BT_DMT_1920X1080P60 V4L2_DV_BT_CEA_1920X1080P60
+
+/* WUXGA resolutions */
+#define V4L2_DV_BT_DMT_1920X1200P60_RB { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1920, 1200, 0, V4L2_DV_HSYNC_POS_POL, \
+		154000000, 48, 32, 80, 3, 6, 26, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
+		V4L2_DV_FL_REDUCED_BLANKING) \
+}
+
+#define V4L2_DV_BT_DMT_1920X1200P60 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1920, 1200, 0, V4L2_DV_VSYNC_POS_POL, \
+		193250000, 136, 200, 336, 3, 6, 36, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1920X1200P75 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1920, 1200, 0, V4L2_DV_VSYNC_POS_POL, \
+		245250000, 136, 208, 344, 3, 6, 46, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1920X1200P85 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1920, 1200, 0, V4L2_DV_VSYNC_POS_POL, \
+		281250000, 144, 208, 352, 3, 6, 53, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1920X1200P120_RB { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1920, 1200, 0, V4L2_DV_HSYNC_POS_POL, \
+		317000000, 48, 32, 80, 3, 6, 62, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
+		V4L2_DV_FL_REDUCED_BLANKING) \
+}
+
+#define V4L2_DV_BT_DMT_1920X1440P60 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1920, 1440, 0, V4L2_DV_VSYNC_POS_POL, \
+		234000000, 128, 208, 344, 1, 3, 56, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1920X1440P75 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1920, 1440, 0, V4L2_DV_VSYNC_POS_POL, \
+		297000000, 144, 224, 352, 1, 3, 56, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_1920X1440P120_RB { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1920, 1440, 0, V4L2_DV_HSYNC_POS_POL, \
+		380500000, 48, 32, 80, 3, 4, 78, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
+		V4L2_DV_FL_REDUCED_BLANKING) \
+}
+
+#define V4L2_DV_BT_DMT_2048X1152P60_RB { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(2048, 1152, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		162000000, 26, 80, 96, 1, 3, 44, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, V4L2_DV_FL_REDUCED_BLANKING) \
+}
+
+/* WQXGA resolutions */
+#define V4L2_DV_BT_DMT_2560X1600P60_RB { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(2560, 1600, 0, V4L2_DV_HSYNC_POS_POL, \
+		268500000, 48, 32, 80, 3, 6, 37, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
+		V4L2_DV_FL_REDUCED_BLANKING) \
+}
+
+#define V4L2_DV_BT_DMT_2560X1600P60 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(2560, 1600, 0, V4L2_DV_VSYNC_POS_POL, \
+		348500000, 192, 280, 472, 3, 6, 49, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_2560X1600P75 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(2560, 1600, 0, V4L2_DV_VSYNC_POS_POL, \
+		443250000, 208, 280, 488, 3, 6, 63, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_2560X1600P85 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(2560, 1600, 0, V4L2_DV_VSYNC_POS_POL, \
+		505250000, 208, 280, 488, 3, 6, 73, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
+}
+
+#define V4L2_DV_BT_DMT_2560X1600P120_RB { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(2560, 1600, 0, V4L2_DV_HSYNC_POS_POL, \
+		552750000, 48, 32, 80, 3, 6, 85, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
+		V4L2_DV_FL_REDUCED_BLANKING) \
+}
+
+#define V4L2_DV_BT_DMT_1366X768P60 { \
+	.type = V4L2_DV_BT_656_1120, \
+	V4L2_INIT_BT_TIMINGS(1366, 768, 0, \
+		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
+		85500000, 70, 143, 213, 3, 3, 24, 0, 0, 0, \
+		V4L2_DV_BT_STD_DMT, 0) \
+}
+
+#endif
diff --git a/include/uapi/linux/v4l2-mediabus.h b/include/uapi/linux/v4l2-mediabus.h
new file mode 100644
index 00000000000..7d64e0e1a18
--- /dev/null
+++ b/include/uapi/linux/v4l2-mediabus.h
@@ -0,0 +1,119 @@
+/*
+ * Media Bus API header
+ *
+ * Copyright (C) 2009, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_V4L2_MEDIABUS_H
+#define __LINUX_V4L2_MEDIABUS_H
+
+#include <linux/types.h>
+#include <linux/videodev2.h>
+
+/*
+ * These pixel codes uniquely identify data formats on the media bus. Mostly
+ * they correspond to similarly named V4L2_PIX_FMT_* formats, format 0 is
+ * reserved, V4L2_MBUS_FMT_FIXED shall be used by host-client pairs, where the
+ * data format is fixed. Additionally, "2X8" means that one pixel is transferred
+ * in two 8-bit samples, "BE" or "LE" specify in which order those samples are
+ * transferred over the bus: "LE" means that the least significant bits are
+ * transferred first, "BE" means that the most significant bits are transferred
+ * first, and "PADHI" and "PADLO" define which bits - low or high, in the
+ * incomplete high byte, are filled with padding bits.
+ *
+ * The pixel codes are grouped by type, bus_width, bits per component, samples
+ * per pixel and order of subsamples. Numerical values are sorted using generic
+ * numerical sort order (8 thus comes before 10).
+ *
+ * As their value can't change when a new pixel code is inserted in the
+ * enumeration, the pixel codes are explicitly given a numerical value. The next
+ * free values for each category are listed below, update them when inserting
+ * new pixel codes.
+ */
+enum v4l2_mbus_pixelcode {
+	V4L2_MBUS_FMT_FIXED = 0x0001,
+
+	/* RGB - next is 0x1009 */
+	V4L2_MBUS_FMT_RGB444_2X8_PADHI_BE = 0x1001,
+	V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE = 0x1002,
+	V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE = 0x1003,
+	V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE = 0x1004,
+	V4L2_MBUS_FMT_BGR565_2X8_BE = 0x1005,
+	V4L2_MBUS_FMT_BGR565_2X8_LE = 0x1006,
+	V4L2_MBUS_FMT_RGB565_2X8_BE = 0x1007,
+	V4L2_MBUS_FMT_RGB565_2X8_LE = 0x1008,
+
+	/* YUV (including grey) - next is 0x2014 */
+	V4L2_MBUS_FMT_Y8_1X8 = 0x2001,
+	V4L2_MBUS_FMT_UYVY8_1_5X8 = 0x2002,
+	V4L2_MBUS_FMT_VYUY8_1_5X8 = 0x2003,
+	V4L2_MBUS_FMT_YUYV8_1_5X8 = 0x2004,
+	V4L2_MBUS_FMT_YVYU8_1_5X8 = 0x2005,
+	V4L2_MBUS_FMT_UYVY8_2X8 = 0x2006,
+	V4L2_MBUS_FMT_VYUY8_2X8 = 0x2007,
+	V4L2_MBUS_FMT_YUYV8_2X8 = 0x2008,
+	V4L2_MBUS_FMT_YVYU8_2X8 = 0x2009,
+	V4L2_MBUS_FMT_Y10_1X10 = 0x200a,
+	V4L2_MBUS_FMT_YUYV10_2X10 = 0x200b,
+	V4L2_MBUS_FMT_YVYU10_2X10 = 0x200c,
+	V4L2_MBUS_FMT_Y12_1X12 = 0x2013,
+	V4L2_MBUS_FMT_UYVY8_1X16 = 0x200f,
+	V4L2_MBUS_FMT_VYUY8_1X16 = 0x2010,
+	V4L2_MBUS_FMT_YUYV8_1X16 = 0x2011,
+	V4L2_MBUS_FMT_YVYU8_1X16 = 0x2012,
+	V4L2_MBUS_FMT_YUYV10_1X20 = 0x200d,
+	V4L2_MBUS_FMT_YVYU10_1X20 = 0x200e,
+
+	/* Bayer - next is 0x3015 */
+	V4L2_MBUS_FMT_SBGGR8_1X8 = 0x3001,
+	V4L2_MBUS_FMT_SGBRG8_1X8 = 0x3013,
+	V4L2_MBUS_FMT_SGRBG8_1X8 = 0x3002,
+	V4L2_MBUS_FMT_SRGGB8_1X8 = 0x3014,
+	V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8 = 0x300b,
+	V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8 = 0x300c,
+	V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8 = 0x3009,
+	V4L2_MBUS_FMT_SRGGB10_DPCM8_1X8 = 0x300d,
+	V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_BE = 0x3003,
+	V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE = 0x3004,
+	V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_BE = 0x3005,
+	V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_LE = 0x3006,
+	V4L2_MBUS_FMT_SBGGR10_1X10 = 0x3007,
+	V4L2_MBUS_FMT_SGBRG10_1X10 = 0x300e,
+	V4L2_MBUS_FMT_SGRBG10_1X10 = 0x300a,
+	V4L2_MBUS_FMT_SRGGB10_1X10 = 0x300f,
+	V4L2_MBUS_FMT_SBGGR12_1X12 = 0x3008,
+	V4L2_MBUS_FMT_SGBRG12_1X12 = 0x3010,
+	V4L2_MBUS_FMT_SGRBG12_1X12 = 0x3011,
+	V4L2_MBUS_FMT_SRGGB12_1X12 = 0x3012,
+
+	/* JPEG compressed formats - next is 0x4002 */
+	V4L2_MBUS_FMT_JPEG_1X8 = 0x4001,
+
+	/* Vendor specific formats - next is 0x5002 */
+
+	/* S5C73M3 sensor specific interleaved UYVY and JPEG */
+	V4L2_MBUS_FMT_S5C_UYVY_JPEG_1X8 = 0x5001,
+};
+
+/**
+ * struct v4l2_mbus_framefmt - frame format on the media bus
+ * @width:	frame width
+ * @height:	frame height
+ * @code:	data format code (from enum v4l2_mbus_pixelcode)
+ * @field:	used interlacing type (from enum v4l2_field)
+ * @colorspace:	colorspace of the data (from enum v4l2_colorspace)
+ */
+struct v4l2_mbus_framefmt {
+	__u32			width;
+	__u32			height;
+	__u32			code;
+	__u32			field;
+	__u32			colorspace;
+	__u32			reserved[7];
+};
+
+#endif
diff --git a/include/uapi/linux/v4l2-subdev.h b/include/uapi/linux/v4l2-subdev.h
new file mode 100644
index 00000000000..a33c4daadce
--- /dev/null
+++ b/include/uapi/linux/v4l2-subdev.h
@@ -0,0 +1,180 @@
+/*
+ * V4L2 subdev userspace API
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __LINUX_V4L2_SUBDEV_H
+#define __LINUX_V4L2_SUBDEV_H
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+#include <linux/v4l2-common.h>
+#include <linux/v4l2-mediabus.h>
+
+/**
+ * enum v4l2_subdev_format_whence - Media bus format type
+ * @V4L2_SUBDEV_FORMAT_TRY: try format, for negotiation only
+ * @V4L2_SUBDEV_FORMAT_ACTIVE: active format, applied to the device
+ */
+enum v4l2_subdev_format_whence {
+	V4L2_SUBDEV_FORMAT_TRY = 0,
+	V4L2_SUBDEV_FORMAT_ACTIVE = 1,
+};
+
+/**
+ * struct v4l2_subdev_format - Pad-level media bus format
+ * @which: format type (from enum v4l2_subdev_format_whence)
+ * @pad: pad number, as reported by the media API
+ * @format: media bus format (format code and frame size)
+ */
+struct v4l2_subdev_format {
+	__u32 which;
+	__u32 pad;
+	struct v4l2_mbus_framefmt format;
+	__u32 reserved[8];
+};
+
+/**
+ * struct v4l2_subdev_crop - Pad-level crop settings
+ * @which: format type (from enum v4l2_subdev_format_whence)
+ * @pad: pad number, as reported by the media API
+ * @rect: pad crop rectangle boundaries
+ */
+struct v4l2_subdev_crop {
+	__u32 which;
+	__u32 pad;
+	struct v4l2_rect rect;
+	__u32 reserved[8];
+};
+
+/**
+ * struct v4l2_subdev_mbus_code_enum - Media bus format enumeration
+ * @pad: pad number, as reported by the media API
+ * @index: format index during enumeration
+ * @code: format code (from enum v4l2_mbus_pixelcode)
+ */
+struct v4l2_subdev_mbus_code_enum {
+	__u32 pad;
+	__u32 index;
+	__u32 code;
+	__u32 reserved[9];
+};
+
+/**
+ * struct v4l2_subdev_frame_size_enum - Media bus format enumeration
+ * @pad: pad number, as reported by the media API
+ * @index: format index during enumeration
+ * @code: format code (from enum v4l2_mbus_pixelcode)
+ */
+struct v4l2_subdev_frame_size_enum {
+	__u32 index;
+	__u32 pad;
+	__u32 code;
+	__u32 min_width;
+	__u32 max_width;
+	__u32 min_height;
+	__u32 max_height;
+	__u32 reserved[9];
+};
+
+/**
+ * struct v4l2_subdev_frame_interval - Pad-level frame rate
+ * @pad: pad number, as reported by the media API
+ * @interval: frame interval in seconds
+ */
+struct v4l2_subdev_frame_interval {
+	__u32 pad;
+	struct v4l2_fract interval;
+	__u32 reserved[9];
+};
+
+/**
+ * struct v4l2_subdev_frame_interval_enum - Frame interval enumeration
+ * @pad: pad number, as reported by the media API
+ * @index: frame interval index during enumeration
+ * @code: format code (from enum v4l2_mbus_pixelcode)
+ * @width: frame width in pixels
+ * @height: frame height in pixels
+ * @interval: frame interval in seconds
+ */
+struct v4l2_subdev_frame_interval_enum {
+	__u32 index;
+	__u32 pad;
+	__u32 code;
+	__u32 width;
+	__u32 height;
+	struct v4l2_fract interval;
+	__u32 reserved[9];
+};
+
+/**
+ * struct v4l2_subdev_selection - selection info
+ *
+ * @which: either V4L2_SUBDEV_FORMAT_ACTIVE or V4L2_SUBDEV_FORMAT_TRY
+ * @pad: pad number, as reported by the media API
+ * @target: Selection target, used to choose one of possible rectangles,
+ *	    defined in v4l2-common.h; V4L2_SEL_TGT_* .
+ * @flags: constraint flags, defined in v4l2-common.h; V4L2_SEL_FLAG_*.
+ * @r: coordinates of the selection window
+ * @reserved: for future use, set to zero for now
+ *
+ * Hardware may use multiple helper windows to process a video stream.
+ * The structure is used to exchange this selection areas between
+ * an application and a driver.
+ */
+struct v4l2_subdev_selection {
+	__u32 which;
+	__u32 pad;
+	__u32 target;
+	__u32 flags;
+	struct v4l2_rect r;
+	__u32 reserved[8];
+};
+
+struct v4l2_subdev_edid {
+	__u32 pad;
+	__u32 start_block;
+	__u32 blocks;
+	__u32 reserved[5];
+	__u8 __user *edid;
+};
+
+#define VIDIOC_SUBDEV_G_FMT	_IOWR('V',  4, struct v4l2_subdev_format)
+#define VIDIOC_SUBDEV_S_FMT	_IOWR('V',  5, struct v4l2_subdev_format)
+#define VIDIOC_SUBDEV_G_FRAME_INTERVAL \
+			_IOWR('V', 21, struct v4l2_subdev_frame_interval)
+#define VIDIOC_SUBDEV_S_FRAME_INTERVAL \
+			_IOWR('V', 22, struct v4l2_subdev_frame_interval)
+#define VIDIOC_SUBDEV_ENUM_MBUS_CODE \
+			_IOWR('V',  2, struct v4l2_subdev_mbus_code_enum)
+#define VIDIOC_SUBDEV_ENUM_FRAME_SIZE \
+			_IOWR('V', 74, struct v4l2_subdev_frame_size_enum)
+#define VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL \
+			_IOWR('V', 75, struct v4l2_subdev_frame_interval_enum)
+#define VIDIOC_SUBDEV_G_CROP	_IOWR('V', 59, struct v4l2_subdev_crop)
+#define VIDIOC_SUBDEV_S_CROP	_IOWR('V', 60, struct v4l2_subdev_crop)
+#define VIDIOC_SUBDEV_G_SELECTION \
+	_IOWR('V', 61, struct v4l2_subdev_selection)
+#define VIDIOC_SUBDEV_S_SELECTION \
+	_IOWR('V', 62, struct v4l2_subdev_selection)
+#define VIDIOC_SUBDEV_G_EDID	_IOWR('V', 40, struct v4l2_subdev_edid)
+#define VIDIOC_SUBDEV_S_EDID	_IOWR('V', 41, struct v4l2_subdev_edid)
+
+#endif
diff --git a/include/uapi/linux/veth.h b/include/uapi/linux/veth.h
new file mode 100644
index 00000000000..3354c1eb424
--- /dev/null
+++ b/include/uapi/linux/veth.h
@@ -0,0 +1,12 @@
+#ifndef __NET_VETH_H_
+#define __NET_VETH_H_
+
+enum {
+	VETH_INFO_UNSPEC,
+	VETH_INFO_PEER,
+
+	__VETH_INFO_MAX
+#define VETH_INFO_MAX	(__VETH_INFO_MAX - 1)
+};
+
+#endif
diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
new file mode 100644
index 00000000000..4758d1bfcf4
--- /dev/null
+++ b/include/uapi/linux/vfio.h
@@ -0,0 +1,368 @@
+/*
+ * VFIO API definition
+ *
+ * Copyright (C) 2012 Red Hat, Inc.  All rights reserved.
+ *     Author: Alex Williamson <alex.williamson@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _UAPIVFIO_H
+#define _UAPIVFIO_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+#define VFIO_API_VERSION	0
+
+
+/* Kernel & User level defines for VFIO IOCTLs. */
+
+/* Extensions */
+
+#define VFIO_TYPE1_IOMMU		1
+
+/*
+ * The IOCTL interface is designed for extensibility by embedding the
+ * structure length (argsz) and flags into structures passed between
+ * kernel and userspace.  We therefore use the _IO() macro for these
+ * defines to avoid implicitly embedding a size into the ioctl request.
+ * As structure fields are added, argsz will increase to match and flag
+ * bits will be defined to indicate additional fields with valid data.
+ * It's *always* the caller's responsibility to indicate the size of
+ * the structure passed by setting argsz appropriately.
+ */
+
+#define VFIO_TYPE	(';')
+#define VFIO_BASE	100
+
+/* -------- IOCTLs for VFIO file descriptor (/dev/vfio/vfio) -------- */
+
+/**
+ * VFIO_GET_API_VERSION - _IO(VFIO_TYPE, VFIO_BASE + 0)
+ *
+ * Report the version of the VFIO API.  This allows us to bump the entire
+ * API version should we later need to add or change features in incompatible
+ * ways.
+ * Return: VFIO_API_VERSION
+ * Availability: Always
+ */
+#define VFIO_GET_API_VERSION		_IO(VFIO_TYPE, VFIO_BASE + 0)
+
+/**
+ * VFIO_CHECK_EXTENSION - _IOW(VFIO_TYPE, VFIO_BASE + 1, __u32)
+ *
+ * Check whether an extension is supported.
+ * Return: 0 if not supported, 1 (or some other positive integer) if supported.
+ * Availability: Always
+ */
+#define VFIO_CHECK_EXTENSION		_IO(VFIO_TYPE, VFIO_BASE + 1)
+
+/**
+ * VFIO_SET_IOMMU - _IOW(VFIO_TYPE, VFIO_BASE + 2, __s32)
+ *
+ * Set the iommu to the given type.  The type must be supported by an
+ * iommu driver as verified by calling CHECK_EXTENSION using the same
+ * type.  A group must be set to this file descriptor before this
+ * ioctl is available.  The IOMMU interfaces enabled by this call are
+ * specific to the value set.
+ * Return: 0 on success, -errno on failure
+ * Availability: When VFIO group attached
+ */
+#define VFIO_SET_IOMMU			_IO(VFIO_TYPE, VFIO_BASE + 2)
+
+/* -------- IOCTLs for GROUP file descriptors (/dev/vfio/$GROUP) -------- */
+
+/**
+ * VFIO_GROUP_GET_STATUS - _IOR(VFIO_TYPE, VFIO_BASE + 3,
+ *						struct vfio_group_status)
+ *
+ * Retrieve information about the group.  Fills in provided
+ * struct vfio_group_info.  Caller sets argsz.
+ * Return: 0 on succes, -errno on failure.
+ * Availability: Always
+ */
+struct vfio_group_status {
+	__u32	argsz;
+	__u32	flags;
+#define VFIO_GROUP_FLAGS_VIABLE		(1 << 0)
+#define VFIO_GROUP_FLAGS_CONTAINER_SET	(1 << 1)
+};
+#define VFIO_GROUP_GET_STATUS		_IO(VFIO_TYPE, VFIO_BASE + 3)
+
+/**
+ * VFIO_GROUP_SET_CONTAINER - _IOW(VFIO_TYPE, VFIO_BASE + 4, __s32)
+ *
+ * Set the container for the VFIO group to the open VFIO file
+ * descriptor provided.  Groups may only belong to a single
+ * container.  Containers may, at their discretion, support multiple
+ * groups.  Only when a container is set are all of the interfaces
+ * of the VFIO file descriptor and the VFIO group file descriptor
+ * available to the user.
+ * Return: 0 on success, -errno on failure.
+ * Availability: Always
+ */
+#define VFIO_GROUP_SET_CONTAINER	_IO(VFIO_TYPE, VFIO_BASE + 4)
+
+/**
+ * VFIO_GROUP_UNSET_CONTAINER - _IO(VFIO_TYPE, VFIO_BASE + 5)
+ *
+ * Remove the group from the attached container.  This is the
+ * opposite of the SET_CONTAINER call and returns the group to
+ * an initial state.  All device file descriptors must be released
+ * prior to calling this interface.  When removing the last group
+ * from a container, the IOMMU will be disabled and all state lost,
+ * effectively also returning the VFIO file descriptor to an initial
+ * state.
+ * Return: 0 on success, -errno on failure.
+ * Availability: When attached to container
+ */
+#define VFIO_GROUP_UNSET_CONTAINER	_IO(VFIO_TYPE, VFIO_BASE + 5)
+
+/**
+ * VFIO_GROUP_GET_DEVICE_FD - _IOW(VFIO_TYPE, VFIO_BASE + 6, char)
+ *
+ * Return a new file descriptor for the device object described by
+ * the provided string.  The string should match a device listed in
+ * the devices subdirectory of the IOMMU group sysfs entry.  The
+ * group containing the device must already be added to this context.
+ * Return: new file descriptor on success, -errno on failure.
+ * Availability: When attached to container
+ */
+#define VFIO_GROUP_GET_DEVICE_FD	_IO(VFIO_TYPE, VFIO_BASE + 6)
+
+/* --------------- IOCTLs for DEVICE file descriptors --------------- */
+
+/**
+ * VFIO_DEVICE_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 7,
+ *						struct vfio_device_info)
+ *
+ * Retrieve information about the device.  Fills in provided
+ * struct vfio_device_info.  Caller sets argsz.
+ * Return: 0 on success, -errno on failure.
+ */
+struct vfio_device_info {
+	__u32	argsz;
+	__u32	flags;
+#define VFIO_DEVICE_FLAGS_RESET	(1 << 0)	/* Device supports reset */
+#define VFIO_DEVICE_FLAGS_PCI	(1 << 1)	/* vfio-pci device */
+	__u32	num_regions;	/* Max region index + 1 */
+	__u32	num_irqs;	/* Max IRQ index + 1 */
+};
+#define VFIO_DEVICE_GET_INFO		_IO(VFIO_TYPE, VFIO_BASE + 7)
+
+/**
+ * VFIO_DEVICE_GET_REGION_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 8,
+ *				       struct vfio_region_info)
+ *
+ * Retrieve information about a device region.  Caller provides
+ * struct vfio_region_info with index value set.  Caller sets argsz.
+ * Implementation of region mapping is bus driver specific.  This is
+ * intended to describe MMIO, I/O port, as well as bus specific
+ * regions (ex. PCI config space).  Zero sized regions may be used
+ * to describe unimplemented regions (ex. unimplemented PCI BARs).
+ * Return: 0 on success, -errno on failure.
+ */
+struct vfio_region_info {
+	__u32	argsz;
+	__u32	flags;
+#define VFIO_REGION_INFO_FLAG_READ	(1 << 0) /* Region supports read */
+#define VFIO_REGION_INFO_FLAG_WRITE	(1 << 1) /* Region supports write */
+#define VFIO_REGION_INFO_FLAG_MMAP	(1 << 2) /* Region supports mmap */
+	__u32	index;		/* Region index */
+	__u32	resv;		/* Reserved for alignment */
+	__u64	size;		/* Region size (bytes) */
+	__u64	offset;		/* Region offset from start of device fd */
+};
+#define VFIO_DEVICE_GET_REGION_INFO	_IO(VFIO_TYPE, VFIO_BASE + 8)
+
+/**
+ * VFIO_DEVICE_GET_IRQ_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 9,
+ *				    struct vfio_irq_info)
+ *
+ * Retrieve information about a device IRQ.  Caller provides
+ * struct vfio_irq_info with index value set.  Caller sets argsz.
+ * Implementation of IRQ mapping is bus driver specific.  Indexes
+ * using multiple IRQs are primarily intended to support MSI-like
+ * interrupt blocks.  Zero count irq blocks may be used to describe
+ * unimplemented interrupt types.
+ *
+ * The EVENTFD flag indicates the interrupt index supports eventfd based
+ * signaling.
+ *
+ * The MASKABLE flags indicates the index supports MASK and UNMASK
+ * actions described below.
+ *
+ * AUTOMASKED indicates that after signaling, the interrupt line is
+ * automatically masked by VFIO and the user needs to unmask the line
+ * to receive new interrupts.  This is primarily intended to distinguish
+ * level triggered interrupts.
+ *
+ * The NORESIZE flag indicates that the interrupt lines within the index
+ * are setup as a set and new subindexes cannot be enabled without first
+ * disabling the entire index.  This is used for interrupts like PCI MSI
+ * and MSI-X where the driver may only use a subset of the available
+ * indexes, but VFIO needs to enable a specific number of vectors
+ * upfront.  In the case of MSI-X, where the user can enable MSI-X and
+ * then add and unmask vectors, it's up to userspace to make the decision
+ * whether to allocate the maximum supported number of vectors or tear
+ * down setup and incrementally increase the vectors as each is enabled.
+ */
+struct vfio_irq_info {
+	__u32	argsz;
+	__u32	flags;
+#define VFIO_IRQ_INFO_EVENTFD		(1 << 0)
+#define VFIO_IRQ_INFO_MASKABLE		(1 << 1)
+#define VFIO_IRQ_INFO_AUTOMASKED	(1 << 2)
+#define VFIO_IRQ_INFO_NORESIZE		(1 << 3)
+	__u32	index;		/* IRQ index */
+	__u32	count;		/* Number of IRQs within this index */
+};
+#define VFIO_DEVICE_GET_IRQ_INFO	_IO(VFIO_TYPE, VFIO_BASE + 9)
+
+/**
+ * VFIO_DEVICE_SET_IRQS - _IOW(VFIO_TYPE, VFIO_BASE + 10, struct vfio_irq_set)
+ *
+ * Set signaling, masking, and unmasking of interrupts.  Caller provides
+ * struct vfio_irq_set with all fields set.  'start' and 'count' indicate
+ * the range of subindexes being specified.
+ *
+ * The DATA flags specify the type of data provided.  If DATA_NONE, the
+ * operation performs the specified action immediately on the specified
+ * interrupt(s).  For example, to unmask AUTOMASKED interrupt [0,0]:
+ * flags = (DATA_NONE|ACTION_UNMASK), index = 0, start = 0, count = 1.
+ *
+ * DATA_BOOL allows sparse support for the same on arrays of interrupts.
+ * For example, to mask interrupts [0,1] and [0,3] (but not [0,2]):
+ * flags = (DATA_BOOL|ACTION_MASK), index = 0, start = 1, count = 3,
+ * data = {1,0,1}
+ *
+ * DATA_EVENTFD binds the specified ACTION to the provided __s32 eventfd.
+ * A value of -1 can be used to either de-assign interrupts if already
+ * assigned or skip un-assigned interrupts.  For example, to set an eventfd
+ * to be trigger for interrupts [0,0] and [0,2]:
+ * flags = (DATA_EVENTFD|ACTION_TRIGGER), index = 0, start = 0, count = 3,
+ * data = {fd1, -1, fd2}
+ * If index [0,1] is previously set, two count = 1 ioctls calls would be
+ * required to set [0,0] and [0,2] without changing [0,1].
+ *
+ * Once a signaling mechanism is set, DATA_BOOL or DATA_NONE can be used
+ * with ACTION_TRIGGER to perform kernel level interrupt loopback testing
+ * from userspace (ie. simulate hardware triggering).
+ *
+ * Setting of an event triggering mechanism to userspace for ACTION_TRIGGER
+ * enables the interrupt index for the device.  Individual subindex interrupts
+ * can be disabled using the -1 value for DATA_EVENTFD or the index can be
+ * disabled as a whole with: flags = (DATA_NONE|ACTION_TRIGGER), count = 0.
+ *
+ * Note that ACTION_[UN]MASK specify user->kernel signaling (irqfds) while
+ * ACTION_TRIGGER specifies kernel->user signaling.
+ */
+struct vfio_irq_set {
+	__u32	argsz;
+	__u32	flags;
+#define VFIO_IRQ_SET_DATA_NONE		(1 << 0) /* Data not present */
+#define VFIO_IRQ_SET_DATA_BOOL		(1 << 1) /* Data is bool (u8) */
+#define VFIO_IRQ_SET_DATA_EVENTFD	(1 << 2) /* Data is eventfd (s32) */
+#define VFIO_IRQ_SET_ACTION_MASK	(1 << 3) /* Mask interrupt */
+#define VFIO_IRQ_SET_ACTION_UNMASK	(1 << 4) /* Unmask interrupt */
+#define VFIO_IRQ_SET_ACTION_TRIGGER	(1 << 5) /* Trigger interrupt */
+	__u32	index;
+	__u32	start;
+	__u32	count;
+	__u8	data[];
+};
+#define VFIO_DEVICE_SET_IRQS		_IO(VFIO_TYPE, VFIO_BASE + 10)
+
+#define VFIO_IRQ_SET_DATA_TYPE_MASK	(VFIO_IRQ_SET_DATA_NONE | \
+					 VFIO_IRQ_SET_DATA_BOOL | \
+					 VFIO_IRQ_SET_DATA_EVENTFD)
+#define VFIO_IRQ_SET_ACTION_TYPE_MASK	(VFIO_IRQ_SET_ACTION_MASK | \
+					 VFIO_IRQ_SET_ACTION_UNMASK | \
+					 VFIO_IRQ_SET_ACTION_TRIGGER)
+/**
+ * VFIO_DEVICE_RESET - _IO(VFIO_TYPE, VFIO_BASE + 11)
+ *
+ * Reset a device.
+ */
+#define VFIO_DEVICE_RESET		_IO(VFIO_TYPE, VFIO_BASE + 11)
+
+/*
+ * The VFIO-PCI bus driver makes use of the following fixed region and
+ * IRQ index mapping.  Unimplemented regions return a size of zero.
+ * Unimplemented IRQ types return a count of zero.
+ */
+
+enum {
+	VFIO_PCI_BAR0_REGION_INDEX,
+	VFIO_PCI_BAR1_REGION_INDEX,
+	VFIO_PCI_BAR2_REGION_INDEX,
+	VFIO_PCI_BAR3_REGION_INDEX,
+	VFIO_PCI_BAR4_REGION_INDEX,
+	VFIO_PCI_BAR5_REGION_INDEX,
+	VFIO_PCI_ROM_REGION_INDEX,
+	VFIO_PCI_CONFIG_REGION_INDEX,
+	VFIO_PCI_NUM_REGIONS
+};
+
+enum {
+	VFIO_PCI_INTX_IRQ_INDEX,
+	VFIO_PCI_MSI_IRQ_INDEX,
+	VFIO_PCI_MSIX_IRQ_INDEX,
+	VFIO_PCI_NUM_IRQS
+};
+
+/* -------- API for Type1 VFIO IOMMU -------- */
+
+/**
+ * VFIO_IOMMU_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 12, struct vfio_iommu_info)
+ *
+ * Retrieve information about the IOMMU object. Fills in provided
+ * struct vfio_iommu_info. Caller sets argsz.
+ *
+ * XXX Should we do these by CHECK_EXTENSION too?
+ */
+struct vfio_iommu_type1_info {
+	__u32	argsz;
+	__u32	flags;
+#define VFIO_IOMMU_INFO_PGSIZES (1 << 0)	/* supported page sizes info */
+	__u64	iova_pgsizes;		/* Bitmap of supported page sizes */
+};
+
+#define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
+
+/**
+ * VFIO_IOMMU_MAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 13, struct vfio_dma_map)
+ *
+ * Map process virtual addresses to IO virtual addresses using the
+ * provided struct vfio_dma_map. Caller sets argsz. READ &/ WRITE required.
+ */
+struct vfio_iommu_type1_dma_map {
+	__u32	argsz;
+	__u32	flags;
+#define VFIO_DMA_MAP_FLAG_READ (1 << 0)		/* readable from device */
+#define VFIO_DMA_MAP_FLAG_WRITE (1 << 1)	/* writable from device */
+	__u64	vaddr;				/* Process virtual address */
+	__u64	iova;				/* IO virtual address */
+	__u64	size;				/* Size of mapping (bytes) */
+};
+
+#define VFIO_IOMMU_MAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 13)
+
+/**
+ * VFIO_IOMMU_UNMAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 14, struct vfio_dma_unmap)
+ *
+ * Unmap IO virtual addresses using the provided struct vfio_dma_unmap.
+ * Caller sets argsz.
+ */
+struct vfio_iommu_type1_dma_unmap {
+	__u32	argsz;
+	__u32	flags;
+	__u64	iova;				/* IO virtual address */
+	__u64	size;				/* Size of mapping (bytes) */
+};
+
+#define VFIO_IOMMU_UNMAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 14)
+
+#endif /* _UAPIVFIO_H */
diff --git a/include/uapi/linux/vhost.h b/include/uapi/linux/vhost.h
new file mode 100644
index 00000000000..e847f1e3075
--- /dev/null
+++ b/include/uapi/linux/vhost.h
@@ -0,0 +1,130 @@
+#ifndef _LINUX_VHOST_H
+#define _LINUX_VHOST_H
+/* Userspace interface for in-kernel virtio accelerators. */
+
+/* vhost is used to reduce the number of system calls involved in virtio.
+ *
+ * Existing virtio net code is used in the guest without modification.
+ *
+ * This header includes interface used by userspace hypervisor for
+ * device configuration.
+ */
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <linux/ioctl.h>
+#include <linux/virtio_config.h>
+#include <linux/virtio_ring.h>
+
+struct vhost_vring_state {
+	unsigned int index;
+	unsigned int num;
+};
+
+struct vhost_vring_file {
+	unsigned int index;
+	int fd; /* Pass -1 to unbind from file. */
+
+};
+
+struct vhost_vring_addr {
+	unsigned int index;
+	/* Option flags. */
+	unsigned int flags;
+	/* Flag values: */
+	/* Whether log address is valid. If set enables logging. */
+#define VHOST_VRING_F_LOG 0
+
+	/* Start of array of descriptors (virtually contiguous) */
+	__u64 desc_user_addr;
+	/* Used structure address. Must be 32 bit aligned */
+	__u64 used_user_addr;
+	/* Available structure address. Must be 16 bit aligned */
+	__u64 avail_user_addr;
+	/* Logging support. */
+	/* Log writes to used structure, at offset calculated from specified
+	 * address. Address must be 32 bit aligned. */
+	__u64 log_guest_addr;
+};
+
+struct vhost_memory_region {
+	__u64 guest_phys_addr;
+	__u64 memory_size; /* bytes */
+	__u64 userspace_addr;
+	__u64 flags_padding; /* No flags are currently specified. */
+};
+
+/* All region addresses and sizes must be 4K aligned. */
+#define VHOST_PAGE_SIZE 0x1000
+
+struct vhost_memory {
+	__u32 nregions;
+	__u32 padding;
+	struct vhost_memory_region regions[0];
+};
+
+/* ioctls */
+
+#define VHOST_VIRTIO 0xAF
+
+/* Features bitmask for forward compatibility.  Transport bits are used for
+ * vhost specific features. */
+#define VHOST_GET_FEATURES	_IOR(VHOST_VIRTIO, 0x00, __u64)
+#define VHOST_SET_FEATURES	_IOW(VHOST_VIRTIO, 0x00, __u64)
+
+/* Set current process as the (exclusive) owner of this file descriptor.  This
+ * must be called before any other vhost command.  Further calls to
+ * VHOST_OWNER_SET fail until VHOST_OWNER_RESET is called. */
+#define VHOST_SET_OWNER _IO(VHOST_VIRTIO, 0x01)
+/* Give up ownership, and reset the device to default values.
+ * Allows subsequent call to VHOST_OWNER_SET to succeed. */
+#define VHOST_RESET_OWNER _IO(VHOST_VIRTIO, 0x02)
+
+/* Set up/modify memory layout */
+#define VHOST_SET_MEM_TABLE	_IOW(VHOST_VIRTIO, 0x03, struct vhost_memory)
+
+/* Write logging setup. */
+/* Memory writes can optionally be logged by setting bit at an offset
+ * (calculated from the physical address) from specified log base.
+ * The bit is set using an atomic 32 bit operation. */
+/* Set base address for logging. */
+#define VHOST_SET_LOG_BASE _IOW(VHOST_VIRTIO, 0x04, __u64)
+/* Specify an eventfd file descriptor to signal on log write. */
+#define VHOST_SET_LOG_FD _IOW(VHOST_VIRTIO, 0x07, int)
+
+/* Ring setup. */
+/* Set number of descriptors in ring. This parameter can not
+ * be modified while ring is running (bound to a device). */
+#define VHOST_SET_VRING_NUM _IOW(VHOST_VIRTIO, 0x10, struct vhost_vring_state)
+/* Set addresses for the ring. */
+#define VHOST_SET_VRING_ADDR _IOW(VHOST_VIRTIO, 0x11, struct vhost_vring_addr)
+/* Base value where queue looks for available descriptors */
+#define VHOST_SET_VRING_BASE _IOW(VHOST_VIRTIO, 0x12, struct vhost_vring_state)
+/* Get accessor: reads index, writes value in num */
+#define VHOST_GET_VRING_BASE _IOWR(VHOST_VIRTIO, 0x12, struct vhost_vring_state)
+
+/* The following ioctls use eventfd file descriptors to signal and poll
+ * for events. */
+
+/* Set eventfd to poll for added buffers */
+#define VHOST_SET_VRING_KICK _IOW(VHOST_VIRTIO, 0x20, struct vhost_vring_file)
+/* Set eventfd to signal when buffers have beed used */
+#define VHOST_SET_VRING_CALL _IOW(VHOST_VIRTIO, 0x21, struct vhost_vring_file)
+/* Set eventfd to signal an error */
+#define VHOST_SET_VRING_ERR _IOW(VHOST_VIRTIO, 0x22, struct vhost_vring_file)
+
+/* VHOST_NET specific defines */
+
+/* Attach virtio net ring to a raw socket, or tap device.
+ * The socket must be already bound to an ethernet device, this device will be
+ * used for transmit.  Pass fd -1 to unbind from the socket and the transmit
+ * device.  This can be used to stop the ring (e.g. for migration). */
+#define VHOST_NET_SET_BACKEND _IOW(VHOST_VIRTIO, 0x30, struct vhost_vring_file)
+
+/* Feature bits */
+/* Log all write descriptors. Can be changed while device is active. */
+#define VHOST_F_LOG_ALL 26
+/* vhost-net should add virtio_net_hdr for RX, and strip for TX packets. */
+#define VHOST_NET_F_VIRTIO_NET_HDR 27
+
+#endif
diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
new file mode 100644
index 00000000000..57bfa59cda7
--- /dev/null
+++ b/include/uapi/linux/videodev2.h
@@ -0,0 +1,1998 @@
+/*
+ *  Video for Linux Two header file
+ *
+ *  Copyright (C) 1999-2012 the contributors
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  Alternatively you can redistribute this file under the terms of the
+ *  BSD license as stated below:
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *  1. Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *  2. Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *  3. The names of its contributors may not be used to endorse or promote
+ *     products derived from this software without specific prior written
+ *     permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ *  TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ *  PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ *  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ *  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ *  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *	Header file for v4l or V4L2 drivers and applications
+ * with public API.
+ * All kernel-specific stuff were moved to media/v4l2-dev.h, so
+ * no #if __KERNEL tests are allowed here
+ *
+ *	See http://linuxtv.org for more info
+ *
+ *	Author: Bill Dirks <bill@thedirks.org>
+ *		Justin Schoeman
+ *              Hans Verkuil <hverkuil@xs4all.nl>
+ *		et al.
+ */
+#ifndef _UAPI__LINUX_VIDEODEV2_H
+#define _UAPI__LINUX_VIDEODEV2_H
+
+#ifndef __KERNEL__
+#include <sys/time.h>
+#endif
+#include <linux/compiler.h>
+#include <linux/ioctl.h>
+#include <linux/types.h>
+#include <linux/v4l2-common.h>
+#include <linux/v4l2-controls.h>
+
+/*
+ * Common stuff for both V4L1 and V4L2
+ * Moved from videodev.h
+ */
+#define VIDEO_MAX_FRAME               32
+#define VIDEO_MAX_PLANES               8
+
+#ifndef __KERNEL__
+
+/* These defines are V4L1 specific and should not be used with the V4L2 API!
+   They will be removed from this header in the future. */
+
+#define VID_TYPE_CAPTURE	1	/* Can capture */
+#define VID_TYPE_TUNER		2	/* Can tune */
+#define VID_TYPE_TELETEXT	4	/* Does teletext */
+#define VID_TYPE_OVERLAY	8	/* Overlay onto frame buffer */
+#define VID_TYPE_CHROMAKEY	16	/* Overlay by chromakey */
+#define VID_TYPE_CLIPPING	32	/* Can clip */
+#define VID_TYPE_FRAMERAM	64	/* Uses the frame buffer memory */
+#define VID_TYPE_SCALES		128	/* Scalable */
+#define VID_TYPE_MONOCHROME	256	/* Monochrome only */
+#define VID_TYPE_SUBCAPTURE	512	/* Can capture subareas of the image */
+#define VID_TYPE_MPEG_DECODER	1024	/* Can decode MPEG streams */
+#define VID_TYPE_MPEG_ENCODER	2048	/* Can encode MPEG streams */
+#define VID_TYPE_MJPEG_DECODER	4096	/* Can decode MJPEG streams */
+#define VID_TYPE_MJPEG_ENCODER	8192	/* Can encode MJPEG streams */
+#endif
+
+/*
+ *	M I S C E L L A N E O U S
+ */
+
+/*  Four-character-code (FOURCC) */
+#define v4l2_fourcc(a, b, c, d)\
+	((__u32)(a) | ((__u32)(b) << 8) | ((__u32)(c) << 16) | ((__u32)(d) << 24))
+
+/*
+ *	E N U M S
+ */
+enum v4l2_field {
+	V4L2_FIELD_ANY           = 0, /* driver can choose from none,
+					 top, bottom, interlaced
+					 depending on whatever it thinks
+					 is approximate ... */
+	V4L2_FIELD_NONE          = 1, /* this device has no fields ... */
+	V4L2_FIELD_TOP           = 2, /* top field only */
+	V4L2_FIELD_BOTTOM        = 3, /* bottom field only */
+	V4L2_FIELD_INTERLACED    = 4, /* both fields interlaced */
+	V4L2_FIELD_SEQ_TB        = 5, /* both fields sequential into one
+					 buffer, top-bottom order */
+	V4L2_FIELD_SEQ_BT        = 6, /* same as above + bottom-top order */
+	V4L2_FIELD_ALTERNATE     = 7, /* both fields alternating into
+					 separate buffers */
+	V4L2_FIELD_INTERLACED_TB = 8, /* both fields interlaced, top field
+					 first and the top field is
+					 transmitted first */
+	V4L2_FIELD_INTERLACED_BT = 9, /* both fields interlaced, top field
+					 first and the bottom field is
+					 transmitted first */
+};
+#define V4L2_FIELD_HAS_TOP(field)	\
+	((field) == V4L2_FIELD_TOP 	||\
+	 (field) == V4L2_FIELD_INTERLACED ||\
+	 (field) == V4L2_FIELD_INTERLACED_TB ||\
+	 (field) == V4L2_FIELD_INTERLACED_BT ||\
+	 (field) == V4L2_FIELD_SEQ_TB	||\
+	 (field) == V4L2_FIELD_SEQ_BT)
+#define V4L2_FIELD_HAS_BOTTOM(field)	\
+	((field) == V4L2_FIELD_BOTTOM 	||\
+	 (field) == V4L2_FIELD_INTERLACED ||\
+	 (field) == V4L2_FIELD_INTERLACED_TB ||\
+	 (field) == V4L2_FIELD_INTERLACED_BT ||\
+	 (field) == V4L2_FIELD_SEQ_TB	||\
+	 (field) == V4L2_FIELD_SEQ_BT)
+#define V4L2_FIELD_HAS_BOTH(field)	\
+	((field) == V4L2_FIELD_INTERLACED ||\
+	 (field) == V4L2_FIELD_INTERLACED_TB ||\
+	 (field) == V4L2_FIELD_INTERLACED_BT ||\
+	 (field) == V4L2_FIELD_SEQ_TB ||\
+	 (field) == V4L2_FIELD_SEQ_BT)
+
+enum v4l2_buf_type {
+	V4L2_BUF_TYPE_VIDEO_CAPTURE        = 1,
+	V4L2_BUF_TYPE_VIDEO_OUTPUT         = 2,
+	V4L2_BUF_TYPE_VIDEO_OVERLAY        = 3,
+	V4L2_BUF_TYPE_VBI_CAPTURE          = 4,
+	V4L2_BUF_TYPE_VBI_OUTPUT           = 5,
+	V4L2_BUF_TYPE_SLICED_VBI_CAPTURE   = 6,
+	V4L2_BUF_TYPE_SLICED_VBI_OUTPUT    = 7,
+#if 1
+	/* Experimental */
+	V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY = 8,
+#endif
+	V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE = 9,
+	V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE  = 10,
+	/* Deprecated, do not use */
+	V4L2_BUF_TYPE_PRIVATE              = 0x80,
+};
+
+#define V4L2_TYPE_IS_MULTIPLANAR(type)			\
+	((type) == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE	\
+	 || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
+
+#define V4L2_TYPE_IS_OUTPUT(type)				\
+	((type) == V4L2_BUF_TYPE_VIDEO_OUTPUT			\
+	 || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE		\
+	 || (type) == V4L2_BUF_TYPE_VIDEO_OVERLAY		\
+	 || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY	\
+	 || (type) == V4L2_BUF_TYPE_VBI_OUTPUT			\
+	 || (type) == V4L2_BUF_TYPE_SLICED_VBI_OUTPUT)
+
+enum v4l2_tuner_type {
+	V4L2_TUNER_RADIO	     = 1,
+	V4L2_TUNER_ANALOG_TV	     = 2,
+	V4L2_TUNER_DIGITAL_TV	     = 3,
+};
+
+enum v4l2_memory {
+	V4L2_MEMORY_MMAP             = 1,
+	V4L2_MEMORY_USERPTR          = 2,
+	V4L2_MEMORY_OVERLAY          = 3,
+};
+
+/* see also http://vektor.theorem.ca/graphics/ycbcr/ */
+enum v4l2_colorspace {
+	/* ITU-R 601 -- broadcast NTSC/PAL */
+	V4L2_COLORSPACE_SMPTE170M     = 1,
+
+	/* 1125-Line (US) HDTV */
+	V4L2_COLORSPACE_SMPTE240M     = 2,
+
+	/* HD and modern captures. */
+	V4L2_COLORSPACE_REC709        = 3,
+
+	/* broken BT878 extents (601, luma range 16-253 instead of 16-235) */
+	V4L2_COLORSPACE_BT878         = 4,
+
+	/* These should be useful.  Assume 601 extents. */
+	V4L2_COLORSPACE_470_SYSTEM_M  = 5,
+	V4L2_COLORSPACE_470_SYSTEM_BG = 6,
+
+	/* I know there will be cameras that send this.  So, this is
+	 * unspecified chromaticities and full 0-255 on each of the
+	 * Y'CbCr components
+	 */
+	V4L2_COLORSPACE_JPEG          = 7,
+
+	/* For RGB colourspaces, this is probably a good start. */
+	V4L2_COLORSPACE_SRGB          = 8,
+};
+
+enum v4l2_priority {
+	V4L2_PRIORITY_UNSET       = 0,  /* not initialized */
+	V4L2_PRIORITY_BACKGROUND  = 1,
+	V4L2_PRIORITY_INTERACTIVE = 2,
+	V4L2_PRIORITY_RECORD      = 3,
+	V4L2_PRIORITY_DEFAULT     = V4L2_PRIORITY_INTERACTIVE,
+};
+
+struct v4l2_rect {
+	__s32   left;
+	__s32   top;
+	__s32   width;
+	__s32   height;
+};
+
+struct v4l2_fract {
+	__u32   numerator;
+	__u32   denominator;
+};
+
+/**
+  * struct v4l2_capability - Describes V4L2 device caps returned by VIDIOC_QUERYCAP
+  *
+  * @driver:	   name of the driver module (e.g. "bttv")
+  * @card:	   name of the card (e.g. "Hauppauge WinTV")
+  * @bus_info:	   name of the bus (e.g. "PCI:" + pci_name(pci_dev) )
+  * @version:	   KERNEL_VERSION
+  * @capabilities: capabilities of the physical device as a whole
+  * @device_caps:  capabilities accessed via this particular device (node)
+  * @reserved:	   reserved fields for future extensions
+  */
+struct v4l2_capability {
+	__u8	driver[16];
+	__u8	card[32];
+	__u8	bus_info[32];
+	__u32   version;
+	__u32	capabilities;
+	__u32	device_caps;
+	__u32	reserved[3];
+};
+
+/* Values for 'capabilities' field */
+#define V4L2_CAP_VIDEO_CAPTURE		0x00000001  /* Is a video capture device */
+#define V4L2_CAP_VIDEO_OUTPUT		0x00000002  /* Is a video output device */
+#define V4L2_CAP_VIDEO_OVERLAY		0x00000004  /* Can do video overlay */
+#define V4L2_CAP_VBI_CAPTURE		0x00000010  /* Is a raw VBI capture device */
+#define V4L2_CAP_VBI_OUTPUT		0x00000020  /* Is a raw VBI output device */
+#define V4L2_CAP_SLICED_VBI_CAPTURE	0x00000040  /* Is a sliced VBI capture device */
+#define V4L2_CAP_SLICED_VBI_OUTPUT	0x00000080  /* Is a sliced VBI output device */
+#define V4L2_CAP_RDS_CAPTURE		0x00000100  /* RDS data capture */
+#define V4L2_CAP_VIDEO_OUTPUT_OVERLAY	0x00000200  /* Can do video output overlay */
+#define V4L2_CAP_HW_FREQ_SEEK		0x00000400  /* Can do hardware frequency seek  */
+#define V4L2_CAP_RDS_OUTPUT		0x00000800  /* Is an RDS encoder */
+
+/* Is a video capture device that supports multiplanar formats */
+#define V4L2_CAP_VIDEO_CAPTURE_MPLANE	0x00001000
+/* Is a video output device that supports multiplanar formats */
+#define V4L2_CAP_VIDEO_OUTPUT_MPLANE	0x00002000
+/* Is a video mem-to-mem device that supports multiplanar formats */
+#define V4L2_CAP_VIDEO_M2M_MPLANE	0x00004000
+/* Is a video mem-to-mem device */
+#define V4L2_CAP_VIDEO_M2M		0x00008000
+
+#define V4L2_CAP_TUNER			0x00010000  /* has a tuner */
+#define V4L2_CAP_AUDIO			0x00020000  /* has audio support */
+#define V4L2_CAP_RADIO			0x00040000  /* is a radio device */
+#define V4L2_CAP_MODULATOR		0x00080000  /* has a modulator */
+
+#define V4L2_CAP_READWRITE              0x01000000  /* read/write systemcalls */
+#define V4L2_CAP_ASYNCIO                0x02000000  /* async I/O */
+#define V4L2_CAP_STREAMING              0x04000000  /* streaming I/O ioctls */
+
+#define V4L2_CAP_DEVICE_CAPS            0x80000000  /* sets device capabilities field */
+
+/*
+ *	V I D E O   I M A G E   F O R M A T
+ */
+struct v4l2_pix_format {
+	__u32         		width;
+	__u32			height;
+	__u32			pixelformat;
+	__u32			field;		/* enum v4l2_field */
+	__u32            	bytesperline;	/* for padding, zero if unused */
+	__u32          		sizeimage;
+	__u32			colorspace;	/* enum v4l2_colorspace */
+	__u32			priv;		/* private data, depends on pixelformat */
+};
+
+/*      Pixel format         FOURCC                          depth  Description  */
+
+/* RGB formats */
+#define V4L2_PIX_FMT_RGB332  v4l2_fourcc('R', 'G', 'B', '1') /*  8  RGB-3-3-2     */
+#define V4L2_PIX_FMT_RGB444  v4l2_fourcc('R', '4', '4', '4') /* 16  xxxxrrrr ggggbbbb */
+#define V4L2_PIX_FMT_RGB555  v4l2_fourcc('R', 'G', 'B', 'O') /* 16  RGB-5-5-5     */
+#define V4L2_PIX_FMT_RGB565  v4l2_fourcc('R', 'G', 'B', 'P') /* 16  RGB-5-6-5     */
+#define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R', 'G', 'B', 'Q') /* 16  RGB-5-5-5 BE  */
+#define V4L2_PIX_FMT_RGB565X v4l2_fourcc('R', 'G', 'B', 'R') /* 16  RGB-5-6-5 BE  */
+#define V4L2_PIX_FMT_BGR666  v4l2_fourcc('B', 'G', 'R', 'H') /* 18  BGR-6-6-6	  */
+#define V4L2_PIX_FMT_BGR24   v4l2_fourcc('B', 'G', 'R', '3') /* 24  BGR-8-8-8     */
+#define V4L2_PIX_FMT_RGB24   v4l2_fourcc('R', 'G', 'B', '3') /* 24  RGB-8-8-8     */
+#define V4L2_PIX_FMT_BGR32   v4l2_fourcc('B', 'G', 'R', '4') /* 32  BGR-8-8-8-8   */
+#define V4L2_PIX_FMT_RGB32   v4l2_fourcc('R', 'G', 'B', '4') /* 32  RGB-8-8-8-8   */
+
+/* Grey formats */
+#define V4L2_PIX_FMT_GREY    v4l2_fourcc('G', 'R', 'E', 'Y') /*  8  Greyscale     */
+#define V4L2_PIX_FMT_Y4      v4l2_fourcc('Y', '0', '4', ' ') /*  4  Greyscale     */
+#define V4L2_PIX_FMT_Y6      v4l2_fourcc('Y', '0', '6', ' ') /*  6  Greyscale     */
+#define V4L2_PIX_FMT_Y10     v4l2_fourcc('Y', '1', '0', ' ') /* 10  Greyscale     */
+#define V4L2_PIX_FMT_Y12     v4l2_fourcc('Y', '1', '2', ' ') /* 12  Greyscale     */
+#define V4L2_PIX_FMT_Y16     v4l2_fourcc('Y', '1', '6', ' ') /* 16  Greyscale     */
+
+/* Grey bit-packed formats */
+#define V4L2_PIX_FMT_Y10BPACK    v4l2_fourcc('Y', '1', '0', 'B') /* 10  Greyscale bit-packed */
+
+/* Palette formats */
+#define V4L2_PIX_FMT_PAL8    v4l2_fourcc('P', 'A', 'L', '8') /*  8  8-bit palette */
+
+/* Luminance+Chrominance formats */
+#define V4L2_PIX_FMT_YVU410  v4l2_fourcc('Y', 'V', 'U', '9') /*  9  YVU 4:1:0     */
+#define V4L2_PIX_FMT_YVU420  v4l2_fourcc('Y', 'V', '1', '2') /* 12  YVU 4:2:0     */
+#define V4L2_PIX_FMT_YUYV    v4l2_fourcc('Y', 'U', 'Y', 'V') /* 16  YUV 4:2:2     */
+#define V4L2_PIX_FMT_YYUV    v4l2_fourcc('Y', 'Y', 'U', 'V') /* 16  YUV 4:2:2     */
+#define V4L2_PIX_FMT_YVYU    v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16 YVU 4:2:2 */
+#define V4L2_PIX_FMT_UYVY    v4l2_fourcc('U', 'Y', 'V', 'Y') /* 16  YUV 4:2:2     */
+#define V4L2_PIX_FMT_VYUY    v4l2_fourcc('V', 'Y', 'U', 'Y') /* 16  YUV 4:2:2     */
+#define V4L2_PIX_FMT_YUV422P v4l2_fourcc('4', '2', '2', 'P') /* 16  YVU422 planar */
+#define V4L2_PIX_FMT_YUV411P v4l2_fourcc('4', '1', '1', 'P') /* 16  YVU411 planar */
+#define V4L2_PIX_FMT_Y41P    v4l2_fourcc('Y', '4', '1', 'P') /* 12  YUV 4:1:1     */
+#define V4L2_PIX_FMT_YUV444  v4l2_fourcc('Y', '4', '4', '4') /* 16  xxxxyyyy uuuuvvvv */
+#define V4L2_PIX_FMT_YUV555  v4l2_fourcc('Y', 'U', 'V', 'O') /* 16  YUV-5-5-5     */
+#define V4L2_PIX_FMT_YUV565  v4l2_fourcc('Y', 'U', 'V', 'P') /* 16  YUV-5-6-5     */
+#define V4L2_PIX_FMT_YUV32   v4l2_fourcc('Y', 'U', 'V', '4') /* 32  YUV-8-8-8-8   */
+#define V4L2_PIX_FMT_YUV410  v4l2_fourcc('Y', 'U', 'V', '9') /*  9  YUV 4:1:0     */
+#define V4L2_PIX_FMT_YUV420  v4l2_fourcc('Y', 'U', '1', '2') /* 12  YUV 4:2:0     */
+#define V4L2_PIX_FMT_HI240   v4l2_fourcc('H', 'I', '2', '4') /*  8  8-bit color   */
+#define V4L2_PIX_FMT_HM12    v4l2_fourcc('H', 'M', '1', '2') /*  8  YUV 4:2:0 16x16 macroblocks */
+#define V4L2_PIX_FMT_M420    v4l2_fourcc('M', '4', '2', '0') /* 12  YUV 4:2:0 2 lines y, 1 line uv interleaved */
+
+/* two planes -- one Y, one Cr + Cb interleaved  */
+#define V4L2_PIX_FMT_NV12    v4l2_fourcc('N', 'V', '1', '2') /* 12  Y/CbCr 4:2:0  */
+#define V4L2_PIX_FMT_NV21    v4l2_fourcc('N', 'V', '2', '1') /* 12  Y/CrCb 4:2:0  */
+#define V4L2_PIX_FMT_NV16    v4l2_fourcc('N', 'V', '1', '6') /* 16  Y/CbCr 4:2:2  */
+#define V4L2_PIX_FMT_NV61    v4l2_fourcc('N', 'V', '6', '1') /* 16  Y/CrCb 4:2:2  */
+#define V4L2_PIX_FMT_NV24    v4l2_fourcc('N', 'V', '2', '4') /* 24  Y/CbCr 4:4:4  */
+#define V4L2_PIX_FMT_NV42    v4l2_fourcc('N', 'V', '4', '2') /* 24  Y/CrCb 4:4:4  */
+
+/* two non contiguous planes - one Y, one Cr + Cb interleaved  */
+#define V4L2_PIX_FMT_NV12M   v4l2_fourcc('N', 'M', '1', '2') /* 12  Y/CbCr 4:2:0  */
+#define V4L2_PIX_FMT_NV21M   v4l2_fourcc('N', 'M', '2', '1') /* 21  Y/CrCb 4:2:0  */
+#define V4L2_PIX_FMT_NV12MT  v4l2_fourcc('T', 'M', '1', '2') /* 12  Y/CbCr 4:2:0 64x32 macroblocks */
+#define V4L2_PIX_FMT_NV12MT_16X16 v4l2_fourcc('V', 'M', '1', '2') /* 12  Y/CbCr 4:2:0 16x16 macroblocks */
+
+/* three non contiguous planes - Y, Cb, Cr */
+#define V4L2_PIX_FMT_YUV420M v4l2_fourcc('Y', 'M', '1', '2') /* 12  YUV420 planar */
+#define V4L2_PIX_FMT_YVU420M v4l2_fourcc('Y', 'M', '2', '1') /* 12  YVU420 planar */
+
+/* Bayer formats - see http://www.siliconimaging.com/RGB%20Bayer.htm */
+#define V4L2_PIX_FMT_SBGGR8  v4l2_fourcc('B', 'A', '8', '1') /*  8  BGBG.. GRGR.. */
+#define V4L2_PIX_FMT_SGBRG8  v4l2_fourcc('G', 'B', 'R', 'G') /*  8  GBGB.. RGRG.. */
+#define V4L2_PIX_FMT_SGRBG8  v4l2_fourcc('G', 'R', 'B', 'G') /*  8  GRGR.. BGBG.. */
+#define V4L2_PIX_FMT_SRGGB8  v4l2_fourcc('R', 'G', 'G', 'B') /*  8  RGRG.. GBGB.. */
+#define V4L2_PIX_FMT_SBGGR10 v4l2_fourcc('B', 'G', '1', '0') /* 10  BGBG.. GRGR.. */
+#define V4L2_PIX_FMT_SGBRG10 v4l2_fourcc('G', 'B', '1', '0') /* 10  GBGB.. RGRG.. */
+#define V4L2_PIX_FMT_SGRBG10 v4l2_fourcc('B', 'A', '1', '0') /* 10  GRGR.. BGBG.. */
+#define V4L2_PIX_FMT_SRGGB10 v4l2_fourcc('R', 'G', '1', '0') /* 10  RGRG.. GBGB.. */
+#define V4L2_PIX_FMT_SBGGR12 v4l2_fourcc('B', 'G', '1', '2') /* 12  BGBG.. GRGR.. */
+#define V4L2_PIX_FMT_SGBRG12 v4l2_fourcc('G', 'B', '1', '2') /* 12  GBGB.. RGRG.. */
+#define V4L2_PIX_FMT_SGRBG12 v4l2_fourcc('B', 'A', '1', '2') /* 12  GRGR.. BGBG.. */
+#define V4L2_PIX_FMT_SRGGB12 v4l2_fourcc('R', 'G', '1', '2') /* 12  RGRG.. GBGB.. */
+	/* 10bit raw bayer DPCM compressed to 8 bits */
+#define V4L2_PIX_FMT_SBGGR10DPCM8 v4l2_fourcc('b', 'B', 'A', '8')
+#define V4L2_PIX_FMT_SGBRG10DPCM8 v4l2_fourcc('b', 'G', 'A', '8')
+#define V4L2_PIX_FMT_SGRBG10DPCM8 v4l2_fourcc('B', 'D', '1', '0')
+#define V4L2_PIX_FMT_SRGGB10DPCM8 v4l2_fourcc('b', 'R', 'A', '8')
+	/*
+	 * 10bit raw bayer, expanded to 16 bits
+	 * xxxxrrrrrrrrrrxxxxgggggggggg xxxxggggggggggxxxxbbbbbbbbbb...
+	 */
+#define V4L2_PIX_FMT_SBGGR16 v4l2_fourcc('B', 'Y', 'R', '2') /* 16  BGBG.. GRGR.. */
+
+/* compressed formats */
+#define V4L2_PIX_FMT_MJPEG    v4l2_fourcc('M', 'J', 'P', 'G') /* Motion-JPEG   */
+#define V4L2_PIX_FMT_JPEG     v4l2_fourcc('J', 'P', 'E', 'G') /* JFIF JPEG     */
+#define V4L2_PIX_FMT_DV       v4l2_fourcc('d', 'v', 's', 'd') /* 1394          */
+#define V4L2_PIX_FMT_MPEG     v4l2_fourcc('M', 'P', 'E', 'G') /* MPEG-1/2/4 Multiplexed */
+#define V4L2_PIX_FMT_H264     v4l2_fourcc('H', '2', '6', '4') /* H264 with start codes */
+#define V4L2_PIX_FMT_H264_NO_SC v4l2_fourcc('A', 'V', 'C', '1') /* H264 without start codes */
+#define V4L2_PIX_FMT_H264_MVC v4l2_fourcc('M', '2', '6', '4') /* H264 MVC */
+#define V4L2_PIX_FMT_H263     v4l2_fourcc('H', '2', '6', '3') /* H263          */
+#define V4L2_PIX_FMT_MPEG1    v4l2_fourcc('M', 'P', 'G', '1') /* MPEG-1 ES     */
+#define V4L2_PIX_FMT_MPEG2    v4l2_fourcc('M', 'P', 'G', '2') /* MPEG-2 ES     */
+#define V4L2_PIX_FMT_MPEG4    v4l2_fourcc('M', 'P', 'G', '4') /* MPEG-4 ES     */
+#define V4L2_PIX_FMT_XVID     v4l2_fourcc('X', 'V', 'I', 'D') /* Xvid           */
+#define V4L2_PIX_FMT_VC1_ANNEX_G v4l2_fourcc('V', 'C', '1', 'G') /* SMPTE 421M Annex G compliant stream */
+#define V4L2_PIX_FMT_VC1_ANNEX_L v4l2_fourcc('V', 'C', '1', 'L') /* SMPTE 421M Annex L compliant stream */
+#define V4L2_PIX_FMT_VP8      v4l2_fourcc('V', 'P', '8', '0') /* VP8 */
+
+/*  Vendor-specific formats   */
+#define V4L2_PIX_FMT_CPIA1    v4l2_fourcc('C', 'P', 'I', 'A') /* cpia1 YUV */
+#define V4L2_PIX_FMT_WNVA     v4l2_fourcc('W', 'N', 'V', 'A') /* Winnov hw compress */
+#define V4L2_PIX_FMT_SN9C10X  v4l2_fourcc('S', '9', '1', '0') /* SN9C10x compression */
+#define V4L2_PIX_FMT_SN9C20X_I420 v4l2_fourcc('S', '9', '2', '0') /* SN9C20x YUV 4:2:0 */
+#define V4L2_PIX_FMT_PWC1     v4l2_fourcc('P', 'W', 'C', '1') /* pwc older webcam */
+#define V4L2_PIX_FMT_PWC2     v4l2_fourcc('P', 'W', 'C', '2') /* pwc newer webcam */
+#define V4L2_PIX_FMT_ET61X251 v4l2_fourcc('E', '6', '2', '5') /* ET61X251 compression */
+#define V4L2_PIX_FMT_SPCA501  v4l2_fourcc('S', '5', '0', '1') /* YUYV per line */
+#define V4L2_PIX_FMT_SPCA505  v4l2_fourcc('S', '5', '0', '5') /* YYUV per line */
+#define V4L2_PIX_FMT_SPCA508  v4l2_fourcc('S', '5', '0', '8') /* YUVY per line */
+#define V4L2_PIX_FMT_SPCA561  v4l2_fourcc('S', '5', '6', '1') /* compressed GBRG bayer */
+#define V4L2_PIX_FMT_PAC207   v4l2_fourcc('P', '2', '0', '7') /* compressed BGGR bayer */
+#define V4L2_PIX_FMT_MR97310A v4l2_fourcc('M', '3', '1', '0') /* compressed BGGR bayer */
+#define V4L2_PIX_FMT_JL2005BCD v4l2_fourcc('J', 'L', '2', '0') /* compressed RGGB bayer */
+#define V4L2_PIX_FMT_SN9C2028 v4l2_fourcc('S', 'O', 'N', 'X') /* compressed GBRG bayer */
+#define V4L2_PIX_FMT_SQ905C   v4l2_fourcc('9', '0', '5', 'C') /* compressed RGGB bayer */
+#define V4L2_PIX_FMT_PJPG     v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */
+#define V4L2_PIX_FMT_OV511    v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */
+#define V4L2_PIX_FMT_OV518    v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */
+#define V4L2_PIX_FMT_STV0680  v4l2_fourcc('S', '6', '8', '0') /* stv0680 bayer */
+#define V4L2_PIX_FMT_TM6000   v4l2_fourcc('T', 'M', '6', '0') /* tm5600/tm60x0 */
+#define V4L2_PIX_FMT_CIT_YYVYUY v4l2_fourcc('C', 'I', 'T', 'V') /* one line of Y then 1 line of VYUY */
+#define V4L2_PIX_FMT_KONICA420  v4l2_fourcc('K', 'O', 'N', 'I') /* YUV420 planar in blocks of 256 pixels */
+#define V4L2_PIX_FMT_JPGL	v4l2_fourcc('J', 'P', 'G', 'L') /* JPEG-Lite */
+#define V4L2_PIX_FMT_SE401      v4l2_fourcc('S', '4', '0', '1') /* se401 janggu compressed rgb */
+#define V4L2_PIX_FMT_S5C_UYVY_JPG v4l2_fourcc('S', '5', 'C', 'I') /* S5C73M3 interleaved UYVY/JPEG */
+
+/*
+ *	F O R M A T   E N U M E R A T I O N
+ */
+struct v4l2_fmtdesc {
+	__u32		    index;             /* Format number      */
+	__u32		    type;              /* enum v4l2_buf_type */
+	__u32               flags;
+	__u8		    description[32];   /* Description string */
+	__u32		    pixelformat;       /* Format fourcc      */
+	__u32		    reserved[4];
+};
+
+#define V4L2_FMT_FLAG_COMPRESSED 0x0001
+#define V4L2_FMT_FLAG_EMULATED   0x0002
+
+#if 1
+	/* Experimental Frame Size and frame rate enumeration */
+/*
+ *	F R A M E   S I Z E   E N U M E R A T I O N
+ */
+enum v4l2_frmsizetypes {
+	V4L2_FRMSIZE_TYPE_DISCRETE	= 1,
+	V4L2_FRMSIZE_TYPE_CONTINUOUS	= 2,
+	V4L2_FRMSIZE_TYPE_STEPWISE	= 3,
+};
+
+struct v4l2_frmsize_discrete {
+	__u32			width;		/* Frame width [pixel] */
+	__u32			height;		/* Frame height [pixel] */
+};
+
+struct v4l2_frmsize_stepwise {
+	__u32			min_width;	/* Minimum frame width [pixel] */
+	__u32			max_width;	/* Maximum frame width [pixel] */
+	__u32			step_width;	/* Frame width step size [pixel] */
+	__u32			min_height;	/* Minimum frame height [pixel] */
+	__u32			max_height;	/* Maximum frame height [pixel] */
+	__u32			step_height;	/* Frame height step size [pixel] */
+};
+
+struct v4l2_frmsizeenum {
+	__u32			index;		/* Frame size number */
+	__u32			pixel_format;	/* Pixel format */
+	__u32			type;		/* Frame size type the device supports. */
+
+	union {					/* Frame size */
+		struct v4l2_frmsize_discrete	discrete;
+		struct v4l2_frmsize_stepwise	stepwise;
+	};
+
+	__u32   reserved[2];			/* Reserved space for future use */
+};
+
+/*
+ *	F R A M E   R A T E   E N U M E R A T I O N
+ */
+enum v4l2_frmivaltypes {
+	V4L2_FRMIVAL_TYPE_DISCRETE	= 1,
+	V4L2_FRMIVAL_TYPE_CONTINUOUS	= 2,
+	V4L2_FRMIVAL_TYPE_STEPWISE	= 3,
+};
+
+struct v4l2_frmival_stepwise {
+	struct v4l2_fract	min;		/* Minimum frame interval [s] */
+	struct v4l2_fract	max;		/* Maximum frame interval [s] */
+	struct v4l2_fract	step;		/* Frame interval step size [s] */
+};
+
+struct v4l2_frmivalenum {
+	__u32			index;		/* Frame format index */
+	__u32			pixel_format;	/* Pixel format */
+	__u32			width;		/* Frame width */
+	__u32			height;		/* Frame height */
+	__u32			type;		/* Frame interval type the device supports. */
+
+	union {					/* Frame interval */
+		struct v4l2_fract		discrete;
+		struct v4l2_frmival_stepwise	stepwise;
+	};
+
+	__u32	reserved[2];			/* Reserved space for future use */
+};
+#endif
+
+/*
+ *	T I M E C O D E
+ */
+struct v4l2_timecode {
+	__u32	type;
+	__u32	flags;
+	__u8	frames;
+	__u8	seconds;
+	__u8	minutes;
+	__u8	hours;
+	__u8	userbits[4];
+};
+
+/*  Type  */
+#define V4L2_TC_TYPE_24FPS		1
+#define V4L2_TC_TYPE_25FPS		2
+#define V4L2_TC_TYPE_30FPS		3
+#define V4L2_TC_TYPE_50FPS		4
+#define V4L2_TC_TYPE_60FPS		5
+
+/*  Flags  */
+#define V4L2_TC_FLAG_DROPFRAME		0x0001 /* "drop-frame" mode */
+#define V4L2_TC_FLAG_COLORFRAME		0x0002
+#define V4L2_TC_USERBITS_field		0x000C
+#define V4L2_TC_USERBITS_USERDEFINED	0x0000
+#define V4L2_TC_USERBITS_8BITCHARS	0x0008
+/* The above is based on SMPTE timecodes */
+
+struct v4l2_jpegcompression {
+	int quality;
+
+	int  APPn;              /* Number of APP segment to be written,
+				 * must be 0..15 */
+	int  APP_len;           /* Length of data in JPEG APPn segment */
+	char APP_data[60];      /* Data in the JPEG APPn segment. */
+
+	int  COM_len;           /* Length of data in JPEG COM segment */
+	char COM_data[60];      /* Data in JPEG COM segment */
+
+	__u32 jpeg_markers;     /* Which markers should go into the JPEG
+				 * output. Unless you exactly know what
+				 * you do, leave them untouched.
+				 * Inluding less markers will make the
+				 * resulting code smaller, but there will
+				 * be fewer applications which can read it.
+				 * The presence of the APP and COM marker
+				 * is influenced by APP_len and COM_len
+				 * ONLY, not by this property! */
+
+#define V4L2_JPEG_MARKER_DHT (1<<3)    /* Define Huffman Tables */
+#define V4L2_JPEG_MARKER_DQT (1<<4)    /* Define Quantization Tables */
+#define V4L2_JPEG_MARKER_DRI (1<<5)    /* Define Restart Interval */
+#define V4L2_JPEG_MARKER_COM (1<<6)    /* Comment segment */
+#define V4L2_JPEG_MARKER_APP (1<<7)    /* App segment, driver will
+					* allways use APP0 */
+};
+
+/*
+ *	M E M O R Y - M A P P I N G   B U F F E R S
+ */
+struct v4l2_requestbuffers {
+	__u32			count;
+	__u32			type;		/* enum v4l2_buf_type */
+	__u32			memory;		/* enum v4l2_memory */
+	__u32			reserved[2];
+};
+
+/**
+ * struct v4l2_plane - plane info for multi-planar buffers
+ * @bytesused:		number of bytes occupied by data in the plane (payload)
+ * @length:		size of this plane (NOT the payload) in bytes
+ * @mem_offset:		when memory in the associated struct v4l2_buffer is
+ *			V4L2_MEMORY_MMAP, equals the offset from the start of
+ *			the device memory for this plane (or is a "cookie" that
+ *			should be passed to mmap() called on the video node)
+ * @userptr:		when memory is V4L2_MEMORY_USERPTR, a userspace pointer
+ *			pointing to this plane
+ * @data_offset:	offset in the plane to the start of data; usually 0,
+ *			unless there is a header in front of the data
+ *
+ * Multi-planar buffers consist of one or more planes, e.g. an YCbCr buffer
+ * with two planes can have one plane for Y, and another for interleaved CbCr
+ * components. Each plane can reside in a separate memory buffer, or even in
+ * a completely separate memory node (e.g. in embedded devices).
+ */
+struct v4l2_plane {
+	__u32			bytesused;
+	__u32			length;
+	union {
+		__u32		mem_offset;
+		unsigned long	userptr;
+	} m;
+	__u32			data_offset;
+	__u32			reserved[11];
+};
+
+/**
+ * struct v4l2_buffer - video buffer info
+ * @index:	id number of the buffer
+ * @type:	enum v4l2_buf_type; buffer type (type == *_MPLANE for
+ *		multiplanar buffers);
+ * @bytesused:	number of bytes occupied by data in the buffer (payload);
+ *		unused (set to 0) for multiplanar buffers
+ * @flags:	buffer informational flags
+ * @field:	enum v4l2_field; field order of the image in the buffer
+ * @timestamp:	frame timestamp
+ * @timecode:	frame timecode
+ * @sequence:	sequence count of this frame
+ * @memory:	enum v4l2_memory; the method, in which the actual video data is
+ *		passed
+ * @offset:	for non-multiplanar buffers with memory == V4L2_MEMORY_MMAP;
+ *		offset from the start of the device memory for this plane,
+ *		(or a "cookie" that should be passed to mmap() as offset)
+ * @userptr:	for non-multiplanar buffers with memory == V4L2_MEMORY_USERPTR;
+ *		a userspace pointer pointing to this buffer
+ * @planes:	for multiplanar buffers; userspace pointer to the array of plane
+ *		info structs for this buffer
+ * @length:	size in bytes of the buffer (NOT its payload) for single-plane
+ *		buffers (when type != *_MPLANE); number of elements in the
+ *		planes array for multi-plane buffers
+ * @input:	input number from which the video data has has been captured
+ *
+ * Contains data exchanged by application and driver using one of the Streaming
+ * I/O methods.
+ */
+struct v4l2_buffer {
+	__u32			index;
+	__u32			type;
+	__u32			bytesused;
+	__u32			flags;
+	__u32			field;
+	struct timeval		timestamp;
+	struct v4l2_timecode	timecode;
+	__u32			sequence;
+
+	/* memory location */
+	__u32			memory;
+	union {
+		__u32           offset;
+		unsigned long   userptr;
+		struct v4l2_plane *planes;
+	} m;
+	__u32			length;
+	__u32			reserved2;
+	__u32			reserved;
+};
+
+/*  Flags for 'flags' field */
+#define V4L2_BUF_FLAG_MAPPED	0x0001  /* Buffer is mapped (flag) */
+#define V4L2_BUF_FLAG_QUEUED	0x0002	/* Buffer is queued for processing */
+#define V4L2_BUF_FLAG_DONE	0x0004	/* Buffer is ready */
+#define V4L2_BUF_FLAG_KEYFRAME	0x0008	/* Image is a keyframe (I-frame) */
+#define V4L2_BUF_FLAG_PFRAME	0x0010	/* Image is a P-frame */
+#define V4L2_BUF_FLAG_BFRAME	0x0020	/* Image is a B-frame */
+/* Buffer is ready, but the data contained within is corrupted. */
+#define V4L2_BUF_FLAG_ERROR	0x0040
+#define V4L2_BUF_FLAG_TIMECODE	0x0100	/* timecode field is valid */
+#define V4L2_BUF_FLAG_PREPARED	0x0400	/* Buffer is prepared for queuing */
+/* Cache handling flags */
+#define V4L2_BUF_FLAG_NO_CACHE_INVALIDATE	0x0800
+#define V4L2_BUF_FLAG_NO_CACHE_CLEAN		0x1000
+
+/*
+ *	O V E R L A Y   P R E V I E W
+ */
+struct v4l2_framebuffer {
+	__u32			capability;
+	__u32			flags;
+/* FIXME: in theory we should pass something like PCI device + memory
+ * region + offset instead of some physical address */
+	void                    *base;
+	struct v4l2_pix_format	fmt;
+};
+/*  Flags for the 'capability' field. Read only */
+#define V4L2_FBUF_CAP_EXTERNOVERLAY	0x0001
+#define V4L2_FBUF_CAP_CHROMAKEY		0x0002
+#define V4L2_FBUF_CAP_LIST_CLIPPING     0x0004
+#define V4L2_FBUF_CAP_BITMAP_CLIPPING	0x0008
+#define V4L2_FBUF_CAP_LOCAL_ALPHA	0x0010
+#define V4L2_FBUF_CAP_GLOBAL_ALPHA	0x0020
+#define V4L2_FBUF_CAP_LOCAL_INV_ALPHA	0x0040
+#define V4L2_FBUF_CAP_SRC_CHROMAKEY	0x0080
+/*  Flags for the 'flags' field. */
+#define V4L2_FBUF_FLAG_PRIMARY		0x0001
+#define V4L2_FBUF_FLAG_OVERLAY		0x0002
+#define V4L2_FBUF_FLAG_CHROMAKEY	0x0004
+#define V4L2_FBUF_FLAG_LOCAL_ALPHA	0x0008
+#define V4L2_FBUF_FLAG_GLOBAL_ALPHA	0x0010
+#define V4L2_FBUF_FLAG_LOCAL_INV_ALPHA	0x0020
+#define V4L2_FBUF_FLAG_SRC_CHROMAKEY	0x0040
+
+struct v4l2_clip {
+	struct v4l2_rect        c;
+	struct v4l2_clip	__user *next;
+};
+
+struct v4l2_window {
+	struct v4l2_rect        w;
+	__u32			field;	 /* enum v4l2_field */
+	__u32			chromakey;
+	struct v4l2_clip	__user *clips;
+	__u32			clipcount;
+	void			__user *bitmap;
+	__u8                    global_alpha;
+};
+
+/*
+ *	C A P T U R E   P A R A M E T E R S
+ */
+struct v4l2_captureparm {
+	__u32		   capability;	  /*  Supported modes */
+	__u32		   capturemode;	  /*  Current mode */
+	struct v4l2_fract  timeperframe;  /*  Time per frame in .1us units */
+	__u32		   extendedmode;  /*  Driver-specific extensions */
+	__u32              readbuffers;   /*  # of buffers for read */
+	__u32		   reserved[4];
+};
+
+/*  Flags for 'capability' and 'capturemode' fields */
+#define V4L2_MODE_HIGHQUALITY	0x0001	/*  High quality imaging mode */
+#define V4L2_CAP_TIMEPERFRAME	0x1000	/*  timeperframe field is supported */
+
+struct v4l2_outputparm {
+	__u32		   capability;	 /*  Supported modes */
+	__u32		   outputmode;	 /*  Current mode */
+	struct v4l2_fract  timeperframe; /*  Time per frame in seconds */
+	__u32		   extendedmode; /*  Driver-specific extensions */
+	__u32              writebuffers; /*  # of buffers for write */
+	__u32		   reserved[4];
+};
+
+/*
+ *	I N P U T   I M A G E   C R O P P I N G
+ */
+struct v4l2_cropcap {
+	__u32			type;	/* enum v4l2_buf_type */
+	struct v4l2_rect        bounds;
+	struct v4l2_rect        defrect;
+	struct v4l2_fract       pixelaspect;
+};
+
+struct v4l2_crop {
+	__u32			type;	/* enum v4l2_buf_type */
+	struct v4l2_rect        c;
+};
+
+/**
+ * struct v4l2_selection - selection info
+ * @type:	buffer type (do not use *_MPLANE types)
+ * @target:	Selection target, used to choose one of possible rectangles;
+ *		defined in v4l2-common.h; V4L2_SEL_TGT_* .
+ * @flags:	constraints flags, defined in v4l2-common.h; V4L2_SEL_FLAG_*.
+ * @r:		coordinates of selection window
+ * @reserved:	for future use, rounds structure size to 64 bytes, set to zero
+ *
+ * Hardware may use multiple helper windows to process a video stream.
+ * The structure is used to exchange this selection areas between
+ * an application and a driver.
+ */
+struct v4l2_selection {
+	__u32			type;
+	__u32			target;
+	__u32                   flags;
+	struct v4l2_rect        r;
+	__u32                   reserved[9];
+};
+
+
+/*
+ *      A N A L O G   V I D E O   S T A N D A R D
+ */
+
+typedef __u64 v4l2_std_id;
+
+/* one bit for each */
+#define V4L2_STD_PAL_B          ((v4l2_std_id)0x00000001)
+#define V4L2_STD_PAL_B1         ((v4l2_std_id)0x00000002)
+#define V4L2_STD_PAL_G          ((v4l2_std_id)0x00000004)
+#define V4L2_STD_PAL_H          ((v4l2_std_id)0x00000008)
+#define V4L2_STD_PAL_I          ((v4l2_std_id)0x00000010)
+#define V4L2_STD_PAL_D          ((v4l2_std_id)0x00000020)
+#define V4L2_STD_PAL_D1         ((v4l2_std_id)0x00000040)
+#define V4L2_STD_PAL_K          ((v4l2_std_id)0x00000080)
+
+#define V4L2_STD_PAL_M          ((v4l2_std_id)0x00000100)
+#define V4L2_STD_PAL_N          ((v4l2_std_id)0x00000200)
+#define V4L2_STD_PAL_Nc         ((v4l2_std_id)0x00000400)
+#define V4L2_STD_PAL_60         ((v4l2_std_id)0x00000800)
+
+#define V4L2_STD_NTSC_M         ((v4l2_std_id)0x00001000)	/* BTSC */
+#define V4L2_STD_NTSC_M_JP      ((v4l2_std_id)0x00002000)	/* EIA-J */
+#define V4L2_STD_NTSC_443       ((v4l2_std_id)0x00004000)
+#define V4L2_STD_NTSC_M_KR      ((v4l2_std_id)0x00008000)	/* FM A2 */
+
+#define V4L2_STD_SECAM_B        ((v4l2_std_id)0x00010000)
+#define V4L2_STD_SECAM_D        ((v4l2_std_id)0x00020000)
+#define V4L2_STD_SECAM_G        ((v4l2_std_id)0x00040000)
+#define V4L2_STD_SECAM_H        ((v4l2_std_id)0x00080000)
+#define V4L2_STD_SECAM_K        ((v4l2_std_id)0x00100000)
+#define V4L2_STD_SECAM_K1       ((v4l2_std_id)0x00200000)
+#define V4L2_STD_SECAM_L        ((v4l2_std_id)0x00400000)
+#define V4L2_STD_SECAM_LC       ((v4l2_std_id)0x00800000)
+
+/* ATSC/HDTV */
+#define V4L2_STD_ATSC_8_VSB     ((v4l2_std_id)0x01000000)
+#define V4L2_STD_ATSC_16_VSB    ((v4l2_std_id)0x02000000)
+
+/* FIXME:
+   Although std_id is 64 bits, there is an issue on PPC32 architecture that
+   makes switch(__u64) to break. So, there's a hack on v4l2-common.c rounding
+   this value to 32 bits.
+   As, currently, the max value is for V4L2_STD_ATSC_16_VSB (30 bits wide),
+   it should work fine. However, if needed to add more than two standards,
+   v4l2-common.c should be fixed.
+ */
+
+/*
+ * Some macros to merge video standards in order to make live easier for the
+ * drivers and V4L2 applications
+ */
+
+/*
+ * "Common" NTSC/M - It should be noticed that V4L2_STD_NTSC_443 is
+ * Missing here.
+ */
+#define V4L2_STD_NTSC           (V4L2_STD_NTSC_M	|\
+				 V4L2_STD_NTSC_M_JP     |\
+				 V4L2_STD_NTSC_M_KR)
+/* Secam macros */
+#define V4L2_STD_SECAM_DK      	(V4L2_STD_SECAM_D	|\
+				 V4L2_STD_SECAM_K	|\
+				 V4L2_STD_SECAM_K1)
+/* All Secam Standards */
+#define V4L2_STD_SECAM		(V4L2_STD_SECAM_B	|\
+				 V4L2_STD_SECAM_G	|\
+				 V4L2_STD_SECAM_H	|\
+				 V4L2_STD_SECAM_DK	|\
+				 V4L2_STD_SECAM_L       |\
+				 V4L2_STD_SECAM_LC)
+/* PAL macros */
+#define V4L2_STD_PAL_BG		(V4L2_STD_PAL_B		|\
+				 V4L2_STD_PAL_B1	|\
+				 V4L2_STD_PAL_G)
+#define V4L2_STD_PAL_DK		(V4L2_STD_PAL_D		|\
+				 V4L2_STD_PAL_D1	|\
+				 V4L2_STD_PAL_K)
+/*
+ * "Common" PAL - This macro is there to be compatible with the old
+ * V4L1 concept of "PAL": /BGDKHI.
+ * Several PAL standards are mising here: /M, /N and /Nc
+ */
+#define V4L2_STD_PAL		(V4L2_STD_PAL_BG	|\
+				 V4L2_STD_PAL_DK	|\
+				 V4L2_STD_PAL_H		|\
+				 V4L2_STD_PAL_I)
+/* Chroma "agnostic" standards */
+#define V4L2_STD_B		(V4L2_STD_PAL_B		|\
+				 V4L2_STD_PAL_B1	|\
+				 V4L2_STD_SECAM_B)
+#define V4L2_STD_G		(V4L2_STD_PAL_G		|\
+				 V4L2_STD_SECAM_G)
+#define V4L2_STD_H		(V4L2_STD_PAL_H		|\
+				 V4L2_STD_SECAM_H)
+#define V4L2_STD_L		(V4L2_STD_SECAM_L	|\
+				 V4L2_STD_SECAM_LC)
+#define V4L2_STD_GH		(V4L2_STD_G		|\
+				 V4L2_STD_H)
+#define V4L2_STD_DK		(V4L2_STD_PAL_DK	|\
+				 V4L2_STD_SECAM_DK)
+#define V4L2_STD_BG		(V4L2_STD_B		|\
+				 V4L2_STD_G)
+#define V4L2_STD_MN		(V4L2_STD_PAL_M		|\
+				 V4L2_STD_PAL_N		|\
+				 V4L2_STD_PAL_Nc	|\
+				 V4L2_STD_NTSC)
+
+/* Standards where MTS/BTSC stereo could be found */
+#define V4L2_STD_MTS		(V4L2_STD_NTSC_M	|\
+				 V4L2_STD_PAL_M		|\
+				 V4L2_STD_PAL_N		|\
+				 V4L2_STD_PAL_Nc)
+
+/* Standards for Countries with 60Hz Line frequency */
+#define V4L2_STD_525_60		(V4L2_STD_PAL_M		|\
+				 V4L2_STD_PAL_60	|\
+				 V4L2_STD_NTSC		|\
+				 V4L2_STD_NTSC_443)
+/* Standards for Countries with 50Hz Line frequency */
+#define V4L2_STD_625_50		(V4L2_STD_PAL		|\
+				 V4L2_STD_PAL_N		|\
+				 V4L2_STD_PAL_Nc	|\
+				 V4L2_STD_SECAM)
+
+#define V4L2_STD_ATSC           (V4L2_STD_ATSC_8_VSB    |\
+				 V4L2_STD_ATSC_16_VSB)
+/* Macros with none and all analog standards */
+#define V4L2_STD_UNKNOWN        0
+#define V4L2_STD_ALL            (V4L2_STD_525_60	|\
+				 V4L2_STD_625_50)
+
+struct v4l2_standard {
+	__u32		     index;
+	v4l2_std_id          id;
+	__u8		     name[24];
+	struct v4l2_fract    frameperiod; /* Frames, not fields */
+	__u32		     framelines;
+	__u32		     reserved[4];
+};
+
+/* The DV Preset API is deprecated in favor of the DV Timings API.
+   New drivers shouldn't use this anymore! */
+
+/*
+ *	V I D E O	T I M I N G S	D V	P R E S E T
+ */
+struct v4l2_dv_preset {
+	__u32	preset;
+	__u32	reserved[4];
+};
+
+/*
+ *	D V	P R E S E T S	E N U M E R A T I O N
+ */
+struct v4l2_dv_enum_preset {
+	__u32	index;
+	__u32	preset;
+	__u8	name[32]; /* Name of the preset timing */
+	__u32	width;
+	__u32	height;
+	__u32	reserved[4];
+};
+
+/*
+ * 	D V	P R E S E T	V A L U E S
+ */
+#define		V4L2_DV_INVALID		0
+#define		V4L2_DV_480P59_94	1 /* BT.1362 */
+#define		V4L2_DV_576P50		2 /* BT.1362 */
+#define		V4L2_DV_720P24		3 /* SMPTE 296M */
+#define		V4L2_DV_720P25		4 /* SMPTE 296M */
+#define		V4L2_DV_720P30		5 /* SMPTE 296M */
+#define		V4L2_DV_720P50		6 /* SMPTE 296M */
+#define		V4L2_DV_720P59_94	7 /* SMPTE 274M */
+#define		V4L2_DV_720P60		8 /* SMPTE 274M/296M */
+#define		V4L2_DV_1080I29_97	9 /* BT.1120/ SMPTE 274M */
+#define		V4L2_DV_1080I30		10 /* BT.1120/ SMPTE 274M */
+#define		V4L2_DV_1080I25		11 /* BT.1120 */
+#define		V4L2_DV_1080I50		12 /* SMPTE 296M */
+#define		V4L2_DV_1080I60		13 /* SMPTE 296M */
+#define		V4L2_DV_1080P24		14 /* SMPTE 296M */
+#define		V4L2_DV_1080P25		15 /* SMPTE 296M */
+#define		V4L2_DV_1080P30		16 /* SMPTE 296M */
+#define		V4L2_DV_1080P50		17 /* BT.1120 */
+#define		V4L2_DV_1080P60		18 /* BT.1120 */
+
+/*
+ *	D V 	B T	T I M I N G S
+ */
+
+/** struct v4l2_bt_timings - BT.656/BT.1120 timing data
+ * @width:	total width of the active video in pixels
+ * @height:	total height of the active video in lines
+ * @interlaced:	Interlaced or progressive
+ * @polarities:	Positive or negative polarities
+ * @pixelclock:	Pixel clock in HZ. Ex. 74.25MHz->74250000
+ * @hfrontporch:Horizontal front porch in pixels
+ * @hsync:	Horizontal Sync length in pixels
+ * @hbackporch:	Horizontal back porch in pixels
+ * @vfrontporch:Vertical front porch in lines
+ * @vsync:	Vertical Sync length in lines
+ * @vbackporch:	Vertical back porch in lines
+ * @il_vfrontporch:Vertical front porch for the even field
+ *		(aka field 2) of interlaced field formats
+ * @il_vsync:	Vertical Sync length for the even field
+ *		(aka field 2) of interlaced field formats
+ * @il_vbackporch:Vertical back porch for the even field
+ *		(aka field 2) of interlaced field formats
+ * @standards:	Standards the timing belongs to
+ * @flags:	Flags
+ * @reserved:	Reserved fields, must be zeroed.
+ *
+ * A note regarding vertical interlaced timings: height refers to the total
+ * height of the active video frame (= two fields). The blanking timings refer
+ * to the blanking of each field. So the height of the total frame is
+ * calculated as follows:
+ *
+ * tot_height = height + vfrontporch + vsync + vbackporch +
+ *                       il_vfrontporch + il_vsync + il_vbackporch
+ *
+ * The active height of each field is height / 2.
+ */
+struct v4l2_bt_timings {
+	__u32	width;
+	__u32	height;
+	__u32	interlaced;
+	__u32	polarities;
+	__u64	pixelclock;
+	__u32	hfrontporch;
+	__u32	hsync;
+	__u32	hbackporch;
+	__u32	vfrontporch;
+	__u32	vsync;
+	__u32	vbackporch;
+	__u32	il_vfrontporch;
+	__u32	il_vsync;
+	__u32	il_vbackporch;
+	__u32	standards;
+	__u32	flags;
+	__u32	reserved[14];
+} __attribute__ ((packed));
+
+/* Interlaced or progressive format */
+#define	V4L2_DV_PROGRESSIVE	0
+#define	V4L2_DV_INTERLACED	1
+
+/* Polarities. If bit is not set, it is assumed to be negative polarity */
+#define V4L2_DV_VSYNC_POS_POL	0x00000001
+#define V4L2_DV_HSYNC_POS_POL	0x00000002
+
+/* Timings standards */
+#define V4L2_DV_BT_STD_CEA861	(1 << 0)  /* CEA-861 Digital TV Profile */
+#define V4L2_DV_BT_STD_DMT	(1 << 1)  /* VESA Discrete Monitor Timings */
+#define V4L2_DV_BT_STD_CVT	(1 << 2)  /* VESA Coordinated Video Timings */
+#define V4L2_DV_BT_STD_GTF	(1 << 3)  /* VESA Generalized Timings Formula */
+
+/* Flags */
+
+/* CVT/GTF specific: timing uses reduced blanking (CVT) or the 'Secondary
+   GTF' curve (GTF). In both cases the horizontal and/or vertical blanking
+   intervals are reduced, allowing a higher resolution over the same
+   bandwidth. This is a read-only flag. */
+#define V4L2_DV_FL_REDUCED_BLANKING		(1 << 0)
+/* CEA-861 specific: set for CEA-861 formats with a framerate of a multiple
+   of six. These formats can be optionally played at 1 / 1.001 speed.
+   This is a read-only flag. */
+#define V4L2_DV_FL_CAN_REDUCE_FPS		(1 << 1)
+/* CEA-861 specific: only valid for video transmitters, the flag is cleared
+   by receivers.
+   If the framerate of the format is a multiple of six, then the pixelclock
+   used to set up the transmitter is divided by 1.001 to make it compatible
+   with 60 Hz based standards such as NTSC and PAL-M that use a framerate of
+   29.97 Hz. Otherwise this flag is cleared. If the transmitter can't generate
+   such frequencies, then the flag will also be cleared. */
+#define V4L2_DV_FL_REDUCED_FPS			(1 << 2)
+/* Specific to interlaced formats: if set, then field 1 is really one half-line
+   longer and field 2 is really one half-line shorter, so each field has
+   exactly the same number of half-lines. Whether half-lines can be detected
+   or used depends on the hardware. */
+#define V4L2_DV_FL_HALF_LINE			(1 << 0)
+
+
+/** struct v4l2_dv_timings - DV timings
+ * @type:	the type of the timings
+ * @bt:	BT656/1120 timings
+ */
+struct v4l2_dv_timings {
+	__u32 type;
+	union {
+		struct v4l2_bt_timings	bt;
+		__u32	reserved[32];
+	};
+} __attribute__ ((packed));
+
+/* Values for the type field */
+#define V4L2_DV_BT_656_1120	0	/* BT.656/1120 timing type */
+
+
+/** struct v4l2_enum_dv_timings - DV timings enumeration
+ * @index:	enumeration index
+ * @reserved:	must be zeroed
+ * @timings:	the timings for the given index
+ */
+struct v4l2_enum_dv_timings {
+	__u32 index;
+	__u32 reserved[3];
+	struct v4l2_dv_timings timings;
+};
+
+/** struct v4l2_bt_timings_cap - BT.656/BT.1120 timing capabilities
+ * @min_width:		width in pixels
+ * @max_width:		width in pixels
+ * @min_height:		height in lines
+ * @max_height:		height in lines
+ * @min_pixelclock:	Pixel clock in HZ. Ex. 74.25MHz->74250000
+ * @max_pixelclock:	Pixel clock in HZ. Ex. 74.25MHz->74250000
+ * @standards:		Supported standards
+ * @capabilities:	Supported capabilities
+ * @reserved:		Must be zeroed
+ */
+struct v4l2_bt_timings_cap {
+	__u32	min_width;
+	__u32	max_width;
+	__u32	min_height;
+	__u32	max_height;
+	__u64	min_pixelclock;
+	__u64	max_pixelclock;
+	__u32	standards;
+	__u32	capabilities;
+	__u32	reserved[16];
+} __attribute__ ((packed));
+
+/* Supports interlaced formats */
+#define V4L2_DV_BT_CAP_INTERLACED	(1 << 0)
+/* Supports progressive formats */
+#define V4L2_DV_BT_CAP_PROGRESSIVE	(1 << 1)
+/* Supports CVT/GTF reduced blanking */
+#define V4L2_DV_BT_CAP_REDUCED_BLANKING	(1 << 2)
+/* Supports custom formats */
+#define V4L2_DV_BT_CAP_CUSTOM		(1 << 3)
+
+/** struct v4l2_dv_timings_cap - DV timings capabilities
+ * @type:	the type of the timings (same as in struct v4l2_dv_timings)
+ * @bt:		the BT656/1120 timings capabilities
+ */
+struct v4l2_dv_timings_cap {
+	__u32 type;
+	__u32 reserved[3];
+	union {
+		struct v4l2_bt_timings_cap bt;
+		__u32 raw_data[32];
+	};
+};
+
+
+/*
+ *	V I D E O   I N P U T S
+ */
+struct v4l2_input {
+	__u32	     index;		/*  Which input */
+	__u8	     name[32];		/*  Label */
+	__u32	     type;		/*  Type of input */
+	__u32	     audioset;		/*  Associated audios (bitfield) */
+	__u32        tuner;             /*  enum v4l2_tuner_type */
+	v4l2_std_id  std;
+	__u32	     status;
+	__u32	     capabilities;
+	__u32	     reserved[3];
+};
+
+/*  Values for the 'type' field */
+#define V4L2_INPUT_TYPE_TUNER		1
+#define V4L2_INPUT_TYPE_CAMERA		2
+
+/* field 'status' - general */
+#define V4L2_IN_ST_NO_POWER    0x00000001  /* Attached device is off */
+#define V4L2_IN_ST_NO_SIGNAL   0x00000002
+#define V4L2_IN_ST_NO_COLOR    0x00000004
+
+/* field 'status' - sensor orientation */
+/* If sensor is mounted upside down set both bits */
+#define V4L2_IN_ST_HFLIP       0x00000010 /* Frames are flipped horizontally */
+#define V4L2_IN_ST_VFLIP       0x00000020 /* Frames are flipped vertically */
+
+/* field 'status' - analog */
+#define V4L2_IN_ST_NO_H_LOCK   0x00000100  /* No horizontal sync lock */
+#define V4L2_IN_ST_COLOR_KILL  0x00000200  /* Color killer is active */
+
+/* field 'status' - digital */
+#define V4L2_IN_ST_NO_SYNC     0x00010000  /* No synchronization lock */
+#define V4L2_IN_ST_NO_EQU      0x00020000  /* No equalizer lock */
+#define V4L2_IN_ST_NO_CARRIER  0x00040000  /* Carrier recovery failed */
+
+/* field 'status' - VCR and set-top box */
+#define V4L2_IN_ST_MACROVISION 0x01000000  /* Macrovision detected */
+#define V4L2_IN_ST_NO_ACCESS   0x02000000  /* Conditional access denied */
+#define V4L2_IN_ST_VTR         0x04000000  /* VTR time constant */
+
+/* capabilities flags */
+#define V4L2_IN_CAP_PRESETS		0x00000001 /* Supports S_DV_PRESET */
+#define V4L2_IN_CAP_DV_TIMINGS		0x00000002 /* Supports S_DV_TIMINGS */
+#define V4L2_IN_CAP_CUSTOM_TIMINGS	V4L2_IN_CAP_DV_TIMINGS /* For compatibility */
+#define V4L2_IN_CAP_STD			0x00000004 /* Supports S_STD */
+
+/*
+ *	V I D E O   O U T P U T S
+ */
+struct v4l2_output {
+	__u32	     index;		/*  Which output */
+	__u8	     name[32];		/*  Label */
+	__u32	     type;		/*  Type of output */
+	__u32	     audioset;		/*  Associated audios (bitfield) */
+	__u32	     modulator;         /*  Associated modulator */
+	v4l2_std_id  std;
+	__u32	     capabilities;
+	__u32	     reserved[3];
+};
+/*  Values for the 'type' field */
+#define V4L2_OUTPUT_TYPE_MODULATOR		1
+#define V4L2_OUTPUT_TYPE_ANALOG			2
+#define V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY	3
+
+/* capabilities flags */
+#define V4L2_OUT_CAP_PRESETS		0x00000001 /* Supports S_DV_PRESET */
+#define V4L2_OUT_CAP_DV_TIMINGS		0x00000002 /* Supports S_DV_TIMINGS */
+#define V4L2_OUT_CAP_CUSTOM_TIMINGS	V4L2_OUT_CAP_DV_TIMINGS /* For compatibility */
+#define V4L2_OUT_CAP_STD		0x00000004 /* Supports S_STD */
+
+/*
+ *	C O N T R O L S
+ */
+struct v4l2_control {
+	__u32		     id;
+	__s32		     value;
+};
+
+struct v4l2_ext_control {
+	__u32 id;
+	__u32 size;
+	__u32 reserved2[1];
+	union {
+		__s32 value;
+		__s64 value64;
+		char *string;
+	};
+} __attribute__ ((packed));
+
+struct v4l2_ext_controls {
+	__u32 ctrl_class;
+	__u32 count;
+	__u32 error_idx;
+	__u32 reserved[2];
+	struct v4l2_ext_control *controls;
+};
+
+#define V4L2_CTRL_ID_MASK      	  (0x0fffffff)
+#define V4L2_CTRL_ID2CLASS(id)    ((id) & 0x0fff0000UL)
+#define V4L2_CTRL_DRIVER_PRIV(id) (((id) & 0xffff) >= 0x1000)
+
+enum v4l2_ctrl_type {
+	V4L2_CTRL_TYPE_INTEGER	     = 1,
+	V4L2_CTRL_TYPE_BOOLEAN	     = 2,
+	V4L2_CTRL_TYPE_MENU	     = 3,
+	V4L2_CTRL_TYPE_BUTTON	     = 4,
+	V4L2_CTRL_TYPE_INTEGER64     = 5,
+	V4L2_CTRL_TYPE_CTRL_CLASS    = 6,
+	V4L2_CTRL_TYPE_STRING        = 7,
+	V4L2_CTRL_TYPE_BITMASK       = 8,
+	V4L2_CTRL_TYPE_INTEGER_MENU = 9,
+};
+
+/*  Used in the VIDIOC_QUERYCTRL ioctl for querying controls */
+struct v4l2_queryctrl {
+	__u32		     id;
+	__u32		     type;	/* enum v4l2_ctrl_type */
+	__u8		     name[32];	/* Whatever */
+	__s32		     minimum;	/* Note signedness */
+	__s32		     maximum;
+	__s32		     step;
+	__s32		     default_value;
+	__u32                flags;
+	__u32		     reserved[2];
+};
+
+/*  Used in the VIDIOC_QUERYMENU ioctl for querying menu items */
+struct v4l2_querymenu {
+	__u32		id;
+	__u32		index;
+	union {
+		__u8	name[32];	/* Whatever */
+		__s64	value;
+	};
+	__u32		reserved;
+} __attribute__ ((packed));
+
+/*  Control flags  */
+#define V4L2_CTRL_FLAG_DISABLED		0x0001
+#define V4L2_CTRL_FLAG_GRABBED		0x0002
+#define V4L2_CTRL_FLAG_READ_ONLY 	0x0004
+#define V4L2_CTRL_FLAG_UPDATE 		0x0008
+#define V4L2_CTRL_FLAG_INACTIVE 	0x0010
+#define V4L2_CTRL_FLAG_SLIDER 		0x0020
+#define V4L2_CTRL_FLAG_WRITE_ONLY 	0x0040
+#define V4L2_CTRL_FLAG_VOLATILE		0x0080
+
+/*  Query flag, to be ORed with the control ID */
+#define V4L2_CTRL_FLAG_NEXT_CTRL	0x80000000
+
+/*  User-class control IDs defined by V4L2 */
+#define V4L2_CID_MAX_CTRLS		1024
+/*  IDs reserved for driver specific controls */
+#define V4L2_CID_PRIVATE_BASE		0x08000000
+
+
+/*  DV-class control IDs defined by V4L2 */
+#define V4L2_CID_DV_CLASS_BASE			(V4L2_CTRL_CLASS_DV | 0x900)
+#define V4L2_CID_DV_CLASS			(V4L2_CTRL_CLASS_DV | 1)
+
+#define	V4L2_CID_DV_TX_HOTPLUG			(V4L2_CID_DV_CLASS_BASE + 1)
+#define	V4L2_CID_DV_TX_RXSENSE			(V4L2_CID_DV_CLASS_BASE + 2)
+#define	V4L2_CID_DV_TX_EDID_PRESENT		(V4L2_CID_DV_CLASS_BASE + 3)
+#define	V4L2_CID_DV_TX_MODE			(V4L2_CID_DV_CLASS_BASE + 4)
+enum v4l2_dv_tx_mode {
+	V4L2_DV_TX_MODE_DVI_D	= 0,
+	V4L2_DV_TX_MODE_HDMI	= 1,
+};
+#define V4L2_CID_DV_TX_RGB_RANGE		(V4L2_CID_DV_CLASS_BASE + 5)
+enum v4l2_dv_rgb_range {
+	V4L2_DV_RGB_RANGE_AUTO	  = 0,
+	V4L2_DV_RGB_RANGE_LIMITED = 1,
+	V4L2_DV_RGB_RANGE_FULL	  = 2,
+};
+
+#define	V4L2_CID_DV_RX_POWER_PRESENT		(V4L2_CID_DV_CLASS_BASE + 100)
+#define V4L2_CID_DV_RX_RGB_RANGE		(V4L2_CID_DV_CLASS_BASE + 101)
+
+/*
+ *	T U N I N G
+ */
+struct v4l2_tuner {
+	__u32                   index;
+	__u8			name[32];
+	__u32			type;	/* enum v4l2_tuner_type */
+	__u32			capability;
+	__u32			rangelow;
+	__u32			rangehigh;
+	__u32			rxsubchans;
+	__u32			audmode;
+	__s32			signal;
+	__s32			afc;
+	__u32			reserved[4];
+};
+
+struct v4l2_modulator {
+	__u32			index;
+	__u8			name[32];
+	__u32			capability;
+	__u32			rangelow;
+	__u32			rangehigh;
+	__u32			txsubchans;
+	__u32			reserved[4];
+};
+
+/*  Flags for the 'capability' field */
+#define V4L2_TUNER_CAP_LOW		0x0001
+#define V4L2_TUNER_CAP_NORM		0x0002
+#define V4L2_TUNER_CAP_HWSEEK_BOUNDED	0x0004
+#define V4L2_TUNER_CAP_HWSEEK_WRAP	0x0008
+#define V4L2_TUNER_CAP_STEREO		0x0010
+#define V4L2_TUNER_CAP_LANG2		0x0020
+#define V4L2_TUNER_CAP_SAP		0x0020
+#define V4L2_TUNER_CAP_LANG1		0x0040
+#define V4L2_TUNER_CAP_RDS		0x0080
+#define V4L2_TUNER_CAP_RDS_BLOCK_IO	0x0100
+#define V4L2_TUNER_CAP_RDS_CONTROLS	0x0200
+#define V4L2_TUNER_CAP_FREQ_BANDS	0x0400
+#define V4L2_TUNER_CAP_HWSEEK_PROG_LIM	0x0800
+
+/*  Flags for the 'rxsubchans' field */
+#define V4L2_TUNER_SUB_MONO		0x0001
+#define V4L2_TUNER_SUB_STEREO		0x0002
+#define V4L2_TUNER_SUB_LANG2		0x0004
+#define V4L2_TUNER_SUB_SAP		0x0004
+#define V4L2_TUNER_SUB_LANG1		0x0008
+#define V4L2_TUNER_SUB_RDS		0x0010
+
+/*  Values for the 'audmode' field */
+#define V4L2_TUNER_MODE_MONO		0x0000
+#define V4L2_TUNER_MODE_STEREO		0x0001
+#define V4L2_TUNER_MODE_LANG2		0x0002
+#define V4L2_TUNER_MODE_SAP		0x0002
+#define V4L2_TUNER_MODE_LANG1		0x0003
+#define V4L2_TUNER_MODE_LANG1_LANG2	0x0004
+
+struct v4l2_frequency {
+	__u32	tuner;
+	__u32	type;	/* enum v4l2_tuner_type */
+	__u32	frequency;
+	__u32	reserved[8];
+};
+
+#define V4L2_BAND_MODULATION_VSB	(1 << 1)
+#define V4L2_BAND_MODULATION_FM		(1 << 2)
+#define V4L2_BAND_MODULATION_AM		(1 << 3)
+
+struct v4l2_frequency_band {
+	__u32	tuner;
+	__u32	type;	/* enum v4l2_tuner_type */
+	__u32	index;
+	__u32	capability;
+	__u32	rangelow;
+	__u32	rangehigh;
+	__u32	modulation;
+	__u32	reserved[9];
+};
+
+struct v4l2_hw_freq_seek {
+	__u32	tuner;
+	__u32	type;	/* enum v4l2_tuner_type */
+	__u32	seek_upward;
+	__u32	wrap_around;
+	__u32	spacing;
+	__u32	rangelow;
+	__u32	rangehigh;
+	__u32	reserved[5];
+};
+
+/*
+ *	R D S
+ */
+
+struct v4l2_rds_data {
+	__u8 	lsb;
+	__u8 	msb;
+	__u8 	block;
+} __attribute__ ((packed));
+
+#define V4L2_RDS_BLOCK_MSK 	 0x7
+#define V4L2_RDS_BLOCK_A 	 0
+#define V4L2_RDS_BLOCK_B 	 1
+#define V4L2_RDS_BLOCK_C 	 2
+#define V4L2_RDS_BLOCK_D 	 3
+#define V4L2_RDS_BLOCK_C_ALT 	 4
+#define V4L2_RDS_BLOCK_INVALID 	 7
+
+#define V4L2_RDS_BLOCK_CORRECTED 0x40
+#define V4L2_RDS_BLOCK_ERROR 	 0x80
+
+/*
+ *	A U D I O
+ */
+struct v4l2_audio {
+	__u32	index;
+	__u8	name[32];
+	__u32	capability;
+	__u32	mode;
+	__u32	reserved[2];
+};
+
+/*  Flags for the 'capability' field */
+#define V4L2_AUDCAP_STEREO		0x00001
+#define V4L2_AUDCAP_AVL			0x00002
+
+/*  Flags for the 'mode' field */
+#define V4L2_AUDMODE_AVL		0x00001
+
+struct v4l2_audioout {
+	__u32	index;
+	__u8	name[32];
+	__u32	capability;
+	__u32	mode;
+	__u32	reserved[2];
+};
+
+/*
+ *	M P E G   S E R V I C E S
+ *
+ *	NOTE: EXPERIMENTAL API
+ */
+#if 1
+#define V4L2_ENC_IDX_FRAME_I    (0)
+#define V4L2_ENC_IDX_FRAME_P    (1)
+#define V4L2_ENC_IDX_FRAME_B    (2)
+#define V4L2_ENC_IDX_FRAME_MASK (0xf)
+
+struct v4l2_enc_idx_entry {
+	__u64 offset;
+	__u64 pts;
+	__u32 length;
+	__u32 flags;
+	__u32 reserved[2];
+};
+
+#define V4L2_ENC_IDX_ENTRIES (64)
+struct v4l2_enc_idx {
+	__u32 entries;
+	__u32 entries_cap;
+	__u32 reserved[4];
+	struct v4l2_enc_idx_entry entry[V4L2_ENC_IDX_ENTRIES];
+};
+
+
+#define V4L2_ENC_CMD_START      (0)
+#define V4L2_ENC_CMD_STOP       (1)
+#define V4L2_ENC_CMD_PAUSE      (2)
+#define V4L2_ENC_CMD_RESUME     (3)
+
+/* Flags for V4L2_ENC_CMD_STOP */
+#define V4L2_ENC_CMD_STOP_AT_GOP_END    (1 << 0)
+
+struct v4l2_encoder_cmd {
+	__u32 cmd;
+	__u32 flags;
+	union {
+		struct {
+			__u32 data[8];
+		} raw;
+	};
+};
+
+/* Decoder commands */
+#define V4L2_DEC_CMD_START       (0)
+#define V4L2_DEC_CMD_STOP        (1)
+#define V4L2_DEC_CMD_PAUSE       (2)
+#define V4L2_DEC_CMD_RESUME      (3)
+
+/* Flags for V4L2_DEC_CMD_START */
+#define V4L2_DEC_CMD_START_MUTE_AUDIO	(1 << 0)
+
+/* Flags for V4L2_DEC_CMD_PAUSE */
+#define V4L2_DEC_CMD_PAUSE_TO_BLACK	(1 << 0)
+
+/* Flags for V4L2_DEC_CMD_STOP */
+#define V4L2_DEC_CMD_STOP_TO_BLACK	(1 << 0)
+#define V4L2_DEC_CMD_STOP_IMMEDIATELY	(1 << 1)
+
+/* Play format requirements (returned by the driver): */
+
+/* The decoder has no special format requirements */
+#define V4L2_DEC_START_FMT_NONE		(0)
+/* The decoder requires full GOPs */
+#define V4L2_DEC_START_FMT_GOP		(1)
+
+/* The structure must be zeroed before use by the application
+   This ensures it can be extended safely in the future. */
+struct v4l2_decoder_cmd {
+	__u32 cmd;
+	__u32 flags;
+	union {
+		struct {
+			__u64 pts;
+		} stop;
+
+		struct {
+			/* 0 or 1000 specifies normal speed,
+			   1 specifies forward single stepping,
+			   -1 specifies backward single stepping,
+			   >1: playback at speed/1000 of the normal speed,
+			   <-1: reverse playback at (-speed/1000) of the normal speed. */
+			__s32 speed;
+			__u32 format;
+		} start;
+
+		struct {
+			__u32 data[16];
+		} raw;
+	};
+};
+#endif
+
+
+/*
+ *	D A T A   S E R V I C E S   ( V B I )
+ *
+ *	Data services API by Michael Schimek
+ */
+
+/* Raw VBI */
+struct v4l2_vbi_format {
+	__u32	sampling_rate;		/* in 1 Hz */
+	__u32	offset;
+	__u32	samples_per_line;
+	__u32	sample_format;		/* V4L2_PIX_FMT_* */
+	__s32	start[2];
+	__u32	count[2];
+	__u32	flags;			/* V4L2_VBI_* */
+	__u32	reserved[2];		/* must be zero */
+};
+
+/*  VBI flags  */
+#define V4L2_VBI_UNSYNC		(1 << 0)
+#define V4L2_VBI_INTERLACED	(1 << 1)
+
+/* Sliced VBI
+ *
+ *    This implements is a proposal V4L2 API to allow SLICED VBI
+ * required for some hardware encoders. It should change without
+ * notice in the definitive implementation.
+ */
+
+struct v4l2_sliced_vbi_format {
+	__u16   service_set;
+	/* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field
+	   service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field
+				 (equals frame lines 313-336 for 625 line video
+				  standards, 263-286 for 525 line standards) */
+	__u16   service_lines[2][24];
+	__u32   io_size;
+	__u32   reserved[2];            /* must be zero */
+};
+
+/* Teletext World System Teletext
+   (WST), defined on ITU-R BT.653-2 */
+#define V4L2_SLICED_TELETEXT_B          (0x0001)
+/* Video Program System, defined on ETS 300 231*/
+#define V4L2_SLICED_VPS                 (0x0400)
+/* Closed Caption, defined on EIA-608 */
+#define V4L2_SLICED_CAPTION_525         (0x1000)
+/* Wide Screen System, defined on ITU-R BT1119.1 */
+#define V4L2_SLICED_WSS_625             (0x4000)
+
+#define V4L2_SLICED_VBI_525             (V4L2_SLICED_CAPTION_525)
+#define V4L2_SLICED_VBI_625             (V4L2_SLICED_TELETEXT_B | V4L2_SLICED_VPS | V4L2_SLICED_WSS_625)
+
+struct v4l2_sliced_vbi_cap {
+	__u16   service_set;
+	/* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field
+	   service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field
+				 (equals frame lines 313-336 for 625 line video
+				  standards, 263-286 for 525 line standards) */
+	__u16   service_lines[2][24];
+	__u32	type;		/* enum v4l2_buf_type */
+	__u32   reserved[3];    /* must be 0 */
+};
+
+struct v4l2_sliced_vbi_data {
+	__u32   id;
+	__u32   field;          /* 0: first field, 1: second field */
+	__u32   line;           /* 1-23 */
+	__u32   reserved;       /* must be 0 */
+	__u8    data[48];
+};
+
+/*
+ * Sliced VBI data inserted into MPEG Streams
+ */
+
+/*
+ * V4L2_MPEG_STREAM_VBI_FMT_IVTV:
+ *
+ * Structure of payload contained in an MPEG 2 Private Stream 1 PES Packet in an
+ * MPEG-2 Program Pack that contains V4L2_MPEG_STREAM_VBI_FMT_IVTV Sliced VBI
+ * data
+ *
+ * Note, the MPEG-2 Program Pack and Private Stream 1 PES packet header
+ * definitions are not included here.  See the MPEG-2 specifications for details
+ * on these headers.
+ */
+
+/* Line type IDs */
+#define V4L2_MPEG_VBI_IVTV_TELETEXT_B     (1)
+#define V4L2_MPEG_VBI_IVTV_CAPTION_525    (4)
+#define V4L2_MPEG_VBI_IVTV_WSS_625        (5)
+#define V4L2_MPEG_VBI_IVTV_VPS            (7)
+
+struct v4l2_mpeg_vbi_itv0_line {
+	__u8 id;	/* One of V4L2_MPEG_VBI_IVTV_* above */
+	__u8 data[42];	/* Sliced VBI data for the line */
+} __attribute__ ((packed));
+
+struct v4l2_mpeg_vbi_itv0 {
+	__le32 linemask[2]; /* Bitmasks of VBI service lines present */
+	struct v4l2_mpeg_vbi_itv0_line line[35];
+} __attribute__ ((packed));
+
+struct v4l2_mpeg_vbi_ITV0 {
+	struct v4l2_mpeg_vbi_itv0_line line[36];
+} __attribute__ ((packed));
+
+#define V4L2_MPEG_VBI_IVTV_MAGIC0	"itv0"
+#define V4L2_MPEG_VBI_IVTV_MAGIC1	"ITV0"
+
+struct v4l2_mpeg_vbi_fmt_ivtv {
+	__u8 magic[4];
+	union {
+		struct v4l2_mpeg_vbi_itv0 itv0;
+		struct v4l2_mpeg_vbi_ITV0 ITV0;
+	};
+} __attribute__ ((packed));
+
+/*
+ *	A G G R E G A T E   S T R U C T U R E S
+ */
+
+/**
+ * struct v4l2_plane_pix_format - additional, per-plane format definition
+ * @sizeimage:		maximum size in bytes required for data, for which
+ *			this plane will be used
+ * @bytesperline:	distance in bytes between the leftmost pixels in two
+ *			adjacent lines
+ */
+struct v4l2_plane_pix_format {
+	__u32		sizeimage;
+	__u16		bytesperline;
+	__u16		reserved[7];
+} __attribute__ ((packed));
+
+/**
+ * struct v4l2_pix_format_mplane - multiplanar format definition
+ * @width:		image width in pixels
+ * @height:		image height in pixels
+ * @pixelformat:	little endian four character code (fourcc)
+ * @field:		enum v4l2_field; field order (for interlaced video)
+ * @colorspace:		enum v4l2_colorspace; supplemental to pixelformat
+ * @plane_fmt:		per-plane information
+ * @num_planes:		number of planes for this format
+ */
+struct v4l2_pix_format_mplane {
+	__u32				width;
+	__u32				height;
+	__u32				pixelformat;
+	__u32				field;
+	__u32				colorspace;
+
+	struct v4l2_plane_pix_format	plane_fmt[VIDEO_MAX_PLANES];
+	__u8				num_planes;
+	__u8				reserved[11];
+} __attribute__ ((packed));
+
+/**
+ * struct v4l2_format - stream data format
+ * @type:	enum v4l2_buf_type; type of the data stream
+ * @pix:	definition of an image format
+ * @pix_mp:	definition of a multiplanar image format
+ * @win:	definition of an overlaid image
+ * @vbi:	raw VBI capture or output parameters
+ * @sliced:	sliced VBI capture or output parameters
+ * @raw_data:	placeholder for future extensions and custom formats
+ */
+struct v4l2_format {
+	__u32	 type;
+	union {
+		struct v4l2_pix_format		pix;     /* V4L2_BUF_TYPE_VIDEO_CAPTURE */
+		struct v4l2_pix_format_mplane	pix_mp;  /* V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE */
+		struct v4l2_window		win;     /* V4L2_BUF_TYPE_VIDEO_OVERLAY */
+		struct v4l2_vbi_format		vbi;     /* V4L2_BUF_TYPE_VBI_CAPTURE */
+		struct v4l2_sliced_vbi_format	sliced;  /* V4L2_BUF_TYPE_SLICED_VBI_CAPTURE */
+		__u8	raw_data[200];                   /* user-defined */
+	} fmt;
+};
+
+/*	Stream type-dependent parameters
+ */
+struct v4l2_streamparm {
+	__u32	 type;			/* enum v4l2_buf_type */
+	union {
+		struct v4l2_captureparm	capture;
+		struct v4l2_outputparm	output;
+		__u8	raw_data[200];  /* user-defined */
+	} parm;
+};
+
+/*
+ *	E V E N T S
+ */
+
+#define V4L2_EVENT_ALL				0
+#define V4L2_EVENT_VSYNC			1
+#define V4L2_EVENT_EOS				2
+#define V4L2_EVENT_CTRL				3
+#define V4L2_EVENT_FRAME_SYNC			4
+#define V4L2_EVENT_PRIVATE_START		0x08000000
+
+/* Payload for V4L2_EVENT_VSYNC */
+struct v4l2_event_vsync {
+	/* Can be V4L2_FIELD_ANY, _NONE, _TOP or _BOTTOM */
+	__u8 field;
+} __attribute__ ((packed));
+
+/* Payload for V4L2_EVENT_CTRL */
+#define V4L2_EVENT_CTRL_CH_VALUE		(1 << 0)
+#define V4L2_EVENT_CTRL_CH_FLAGS		(1 << 1)
+
+struct v4l2_event_ctrl {
+	__u32 changes;
+	__u32 type;
+	union {
+		__s32 value;
+		__s64 value64;
+	};
+	__u32 flags;
+	__s32 minimum;
+	__s32 maximum;
+	__s32 step;
+	__s32 default_value;
+};
+
+struct v4l2_event_frame_sync {
+	__u32 frame_sequence;
+};
+
+struct v4l2_event {
+	__u32				type;
+	union {
+		struct v4l2_event_vsync		vsync;
+		struct v4l2_event_ctrl		ctrl;
+		struct v4l2_event_frame_sync	frame_sync;
+		__u8				data[64];
+	} u;
+	__u32				pending;
+	__u32				sequence;
+	struct timespec			timestamp;
+	__u32				id;
+	__u32				reserved[8];
+};
+
+#define V4L2_EVENT_SUB_FL_SEND_INITIAL		(1 << 0)
+#define V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK	(1 << 1)
+
+struct v4l2_event_subscription {
+	__u32				type;
+	__u32				id;
+	__u32				flags;
+	__u32				reserved[5];
+};
+
+/*
+ *	A D V A N C E D   D E B U G G I N G
+ *
+ *	NOTE: EXPERIMENTAL API, NEVER RELY ON THIS IN APPLICATIONS!
+ *	FOR DEBUGGING, TESTING AND INTERNAL USE ONLY!
+ */
+
+/* VIDIOC_DBG_G_REGISTER and VIDIOC_DBG_S_REGISTER */
+
+#define V4L2_CHIP_MATCH_HOST       0  /* Match against chip ID on host (0 for the host) */
+#define V4L2_CHIP_MATCH_I2C_DRIVER 1  /* Match against I2C driver name */
+#define V4L2_CHIP_MATCH_I2C_ADDR   2  /* Match against I2C 7-bit address */
+#define V4L2_CHIP_MATCH_AC97       3  /* Match against anciliary AC97 chip */
+
+struct v4l2_dbg_match {
+	__u32 type; /* Match type */
+	union {     /* Match this chip, meaning determined by type */
+		__u32 addr;
+		char name[32];
+	};
+} __attribute__ ((packed));
+
+struct v4l2_dbg_register {
+	struct v4l2_dbg_match match;
+	__u32 size;	/* register size in bytes */
+	__u64 reg;
+	__u64 val;
+} __attribute__ ((packed));
+
+/* VIDIOC_DBG_G_CHIP_IDENT */
+struct v4l2_dbg_chip_ident {
+	struct v4l2_dbg_match match;
+	__u32 ident;       /* chip identifier as specified in <media/v4l2-chip-ident.h> */
+	__u32 revision;    /* chip revision, chip specific */
+} __attribute__ ((packed));
+
+/**
+ * struct v4l2_create_buffers - VIDIOC_CREATE_BUFS argument
+ * @index:	on return, index of the first created buffer
+ * @count:	entry: number of requested buffers,
+ *		return: number of created buffers
+ * @memory:	enum v4l2_memory; buffer memory type
+ * @format:	frame format, for which buffers are requested
+ * @reserved:	future extensions
+ */
+struct v4l2_create_buffers {
+	__u32			index;
+	__u32			count;
+	__u32			memory;
+	struct v4l2_format	format;
+	__u32			reserved[8];
+};
+
+/*
+ *	I O C T L   C O D E S   F O R   V I D E O   D E V I C E S
+ *
+ */
+#define VIDIOC_QUERYCAP		 _IOR('V',  0, struct v4l2_capability)
+#define VIDIOC_RESERVED		  _IO('V',  1)
+#define VIDIOC_ENUM_FMT         _IOWR('V',  2, struct v4l2_fmtdesc)
+#define VIDIOC_G_FMT		_IOWR('V',  4, struct v4l2_format)
+#define VIDIOC_S_FMT		_IOWR('V',  5, struct v4l2_format)
+#define VIDIOC_REQBUFS		_IOWR('V',  8, struct v4l2_requestbuffers)
+#define VIDIOC_QUERYBUF		_IOWR('V',  9, struct v4l2_buffer)
+#define VIDIOC_G_FBUF		 _IOR('V', 10, struct v4l2_framebuffer)
+#define VIDIOC_S_FBUF		 _IOW('V', 11, struct v4l2_framebuffer)
+#define VIDIOC_OVERLAY		 _IOW('V', 14, int)
+#define VIDIOC_QBUF		_IOWR('V', 15, struct v4l2_buffer)
+#define VIDIOC_DQBUF		_IOWR('V', 17, struct v4l2_buffer)
+#define VIDIOC_STREAMON		 _IOW('V', 18, int)
+#define VIDIOC_STREAMOFF	 _IOW('V', 19, int)
+#define VIDIOC_G_PARM		_IOWR('V', 21, struct v4l2_streamparm)
+#define VIDIOC_S_PARM		_IOWR('V', 22, struct v4l2_streamparm)
+#define VIDIOC_G_STD		 _IOR('V', 23, v4l2_std_id)
+#define VIDIOC_S_STD		 _IOW('V', 24, v4l2_std_id)
+#define VIDIOC_ENUMSTD		_IOWR('V', 25, struct v4l2_standard)
+#define VIDIOC_ENUMINPUT	_IOWR('V', 26, struct v4l2_input)
+#define VIDIOC_G_CTRL		_IOWR('V', 27, struct v4l2_control)
+#define VIDIOC_S_CTRL		_IOWR('V', 28, struct v4l2_control)
+#define VIDIOC_G_TUNER		_IOWR('V', 29, struct v4l2_tuner)
+#define VIDIOC_S_TUNER		 _IOW('V', 30, struct v4l2_tuner)
+#define VIDIOC_G_AUDIO		 _IOR('V', 33, struct v4l2_audio)
+#define VIDIOC_S_AUDIO		 _IOW('V', 34, struct v4l2_audio)
+#define VIDIOC_QUERYCTRL	_IOWR('V', 36, struct v4l2_queryctrl)
+#define VIDIOC_QUERYMENU	_IOWR('V', 37, struct v4l2_querymenu)
+#define VIDIOC_G_INPUT		 _IOR('V', 38, int)
+#define VIDIOC_S_INPUT		_IOWR('V', 39, int)
+#define VIDIOC_G_OUTPUT		 _IOR('V', 46, int)
+#define VIDIOC_S_OUTPUT		_IOWR('V', 47, int)
+#define VIDIOC_ENUMOUTPUT	_IOWR('V', 48, struct v4l2_output)
+#define VIDIOC_G_AUDOUT		 _IOR('V', 49, struct v4l2_audioout)
+#define VIDIOC_S_AUDOUT		 _IOW('V', 50, struct v4l2_audioout)
+#define VIDIOC_G_MODULATOR	_IOWR('V', 54, struct v4l2_modulator)
+#define VIDIOC_S_MODULATOR	 _IOW('V', 55, struct v4l2_modulator)
+#define VIDIOC_G_FREQUENCY	_IOWR('V', 56, struct v4l2_frequency)
+#define VIDIOC_S_FREQUENCY	 _IOW('V', 57, struct v4l2_frequency)
+#define VIDIOC_CROPCAP		_IOWR('V', 58, struct v4l2_cropcap)
+#define VIDIOC_G_CROP		_IOWR('V', 59, struct v4l2_crop)
+#define VIDIOC_S_CROP		 _IOW('V', 60, struct v4l2_crop)
+#define VIDIOC_G_JPEGCOMP	 _IOR('V', 61, struct v4l2_jpegcompression)
+#define VIDIOC_S_JPEGCOMP	 _IOW('V', 62, struct v4l2_jpegcompression)
+#define VIDIOC_QUERYSTD      	 _IOR('V', 63, v4l2_std_id)
+#define VIDIOC_TRY_FMT      	_IOWR('V', 64, struct v4l2_format)
+#define VIDIOC_ENUMAUDIO	_IOWR('V', 65, struct v4l2_audio)
+#define VIDIOC_ENUMAUDOUT	_IOWR('V', 66, struct v4l2_audioout)
+#define VIDIOC_G_PRIORITY	 _IOR('V', 67, __u32) /* enum v4l2_priority */
+#define VIDIOC_S_PRIORITY	 _IOW('V', 68, __u32) /* enum v4l2_priority */
+#define VIDIOC_G_SLICED_VBI_CAP _IOWR('V', 69, struct v4l2_sliced_vbi_cap)
+#define VIDIOC_LOG_STATUS         _IO('V', 70)
+#define VIDIOC_G_EXT_CTRLS	_IOWR('V', 71, struct v4l2_ext_controls)
+#define VIDIOC_S_EXT_CTRLS	_IOWR('V', 72, struct v4l2_ext_controls)
+#define VIDIOC_TRY_EXT_CTRLS	_IOWR('V', 73, struct v4l2_ext_controls)
+#if 1
+#define VIDIOC_ENUM_FRAMESIZES	_IOWR('V', 74, struct v4l2_frmsizeenum)
+#define VIDIOC_ENUM_FRAMEINTERVALS _IOWR('V', 75, struct v4l2_frmivalenum)
+#define VIDIOC_G_ENC_INDEX       _IOR('V', 76, struct v4l2_enc_idx)
+#define VIDIOC_ENCODER_CMD      _IOWR('V', 77, struct v4l2_encoder_cmd)
+#define VIDIOC_TRY_ENCODER_CMD  _IOWR('V', 78, struct v4l2_encoder_cmd)
+#endif
+
+#if 1
+/* Experimental, meant for debugging, testing and internal use.
+   Only implemented if CONFIG_VIDEO_ADV_DEBUG is defined.
+   You must be root to use these ioctls. Never use these in applications! */
+#define	VIDIOC_DBG_S_REGISTER 	 _IOW('V', 79, struct v4l2_dbg_register)
+#define	VIDIOC_DBG_G_REGISTER 	_IOWR('V', 80, struct v4l2_dbg_register)
+
+/* Experimental, meant for debugging, testing and internal use.
+   Never use this ioctl in applications! */
+#define VIDIOC_DBG_G_CHIP_IDENT _IOWR('V', 81, struct v4l2_dbg_chip_ident)
+#endif
+
+#define VIDIOC_S_HW_FREQ_SEEK	 _IOW('V', 82, struct v4l2_hw_freq_seek)
+
+/* These four DV Preset ioctls are deprecated in favor of the DV Timings
+   ioctls. */
+#define	VIDIOC_ENUM_DV_PRESETS	_IOWR('V', 83, struct v4l2_dv_enum_preset)
+#define	VIDIOC_S_DV_PRESET	_IOWR('V', 84, struct v4l2_dv_preset)
+#define	VIDIOC_G_DV_PRESET	_IOWR('V', 85, struct v4l2_dv_preset)
+#define	VIDIOC_QUERY_DV_PRESET	_IOR('V',  86, struct v4l2_dv_preset)
+#define	VIDIOC_S_DV_TIMINGS	_IOWR('V', 87, struct v4l2_dv_timings)
+#define	VIDIOC_G_DV_TIMINGS	_IOWR('V', 88, struct v4l2_dv_timings)
+#define	VIDIOC_DQEVENT		 _IOR('V', 89, struct v4l2_event)
+#define	VIDIOC_SUBSCRIBE_EVENT	 _IOW('V', 90, struct v4l2_event_subscription)
+#define	VIDIOC_UNSUBSCRIBE_EVENT _IOW('V', 91, struct v4l2_event_subscription)
+
+/* Experimental, the below two ioctls may change over the next couple of kernel
+   versions */
+#define VIDIOC_CREATE_BUFS	_IOWR('V', 92, struct v4l2_create_buffers)
+#define VIDIOC_PREPARE_BUF	_IOWR('V', 93, struct v4l2_buffer)
+
+/* Experimental selection API */
+#define VIDIOC_G_SELECTION	_IOWR('V', 94, struct v4l2_selection)
+#define VIDIOC_S_SELECTION	_IOWR('V', 95, struct v4l2_selection)
+
+/* Experimental, these two ioctls may change over the next couple of kernel
+   versions. */
+#define VIDIOC_DECODER_CMD	_IOWR('V', 96, struct v4l2_decoder_cmd)
+#define VIDIOC_TRY_DECODER_CMD	_IOWR('V', 97, struct v4l2_decoder_cmd)
+
+/* Experimental, these three ioctls may change over the next couple of kernel
+   versions. */
+#define VIDIOC_ENUM_DV_TIMINGS  _IOWR('V', 98, struct v4l2_enum_dv_timings)
+#define VIDIOC_QUERY_DV_TIMINGS  _IOR('V', 99, struct v4l2_dv_timings)
+#define VIDIOC_DV_TIMINGS_CAP   _IOWR('V', 100, struct v4l2_dv_timings_cap)
+
+/* Experimental, this ioctl may change over the next couple of kernel
+   versions. */
+#define VIDIOC_ENUM_FREQ_BANDS	_IOWR('V', 101, struct v4l2_frequency_band)
+
+/* Reminder: when adding new ioctls please add support for them to
+   drivers/media/video/v4l2-compat-ioctl32.c as well! */
+
+#define BASE_VIDIOC_PRIVATE	192		/* 192-255 are private */
+
+#endif /* _UAPI__LINUX_VIDEODEV2_H */
diff --git a/include/uapi/linux/virtio_9p.h b/include/uapi/linux/virtio_9p.h
new file mode 100644
index 00000000000..277c4ad44e8
--- /dev/null
+++ b/include/uapi/linux/virtio_9p.h
@@ -0,0 +1,44 @@
+#ifndef _LINUX_VIRTIO_9P_H
+#define _LINUX_VIRTIO_9P_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE. */
+#include <linux/types.h>
+#include <linux/virtio_ids.h>
+#include <linux/virtio_config.h>
+
+/* The feature bitmap for virtio 9P */
+
+/* The mount point is specified in a config variable */
+#define VIRTIO_9P_MOUNT_TAG 0
+
+struct virtio_9p_config {
+	/* length of the tag name */
+	__u16 tag_len;
+	/* non-NULL terminated tag name */
+	__u8 tag[0];
+} __attribute__((packed));
+
+#endif /* _LINUX_VIRTIO_9P_H */
diff --git a/include/uapi/linux/virtio_balloon.h b/include/uapi/linux/virtio_balloon.h
new file mode 100644
index 00000000000..652dc8bea92
--- /dev/null
+++ b/include/uapi/linux/virtio_balloon.h
@@ -0,0 +1,59 @@
+#ifndef _LINUX_VIRTIO_BALLOON_H
+#define _LINUX_VIRTIO_BALLOON_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE. */
+#include <linux/virtio_ids.h>
+#include <linux/virtio_config.h>
+
+/* The feature bitmap for virtio balloon */
+#define VIRTIO_BALLOON_F_MUST_TELL_HOST	0 /* Tell before reclaiming pages */
+#define VIRTIO_BALLOON_F_STATS_VQ	1 /* Memory Stats virtqueue */
+
+/* Size of a PFN in the balloon interface. */
+#define VIRTIO_BALLOON_PFN_SHIFT 12
+
+struct virtio_balloon_config
+{
+	/* Number of pages host wants Guest to give up. */
+	__le32 num_pages;
+	/* Number of pages we've actually got in balloon. */
+	__le32 actual;
+};
+
+#define VIRTIO_BALLOON_S_SWAP_IN  0   /* Amount of memory swapped in */
+#define VIRTIO_BALLOON_S_SWAP_OUT 1   /* Amount of memory swapped out */
+#define VIRTIO_BALLOON_S_MAJFLT   2   /* Number of major faults */
+#define VIRTIO_BALLOON_S_MINFLT   3   /* Number of minor faults */
+#define VIRTIO_BALLOON_S_MEMFREE  4   /* Total amount of free memory */
+#define VIRTIO_BALLOON_S_MEMTOT   5   /* Total amount of memory */
+#define VIRTIO_BALLOON_S_NR       6
+
+struct virtio_balloon_stat {
+	u16 tag;
+	u64 val;
+} __attribute__((packed));
+
+#endif /* _LINUX_VIRTIO_BALLOON_H */
diff --git a/include/uapi/linux/virtio_blk.h b/include/uapi/linux/virtio_blk.h
new file mode 100644
index 00000000000..6d8e61c4856
--- /dev/null
+++ b/include/uapi/linux/virtio_blk.h
@@ -0,0 +1,130 @@
+#ifndef _LINUX_VIRTIO_BLK_H
+#define _LINUX_VIRTIO_BLK_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE. */
+#include <linux/types.h>
+#include <linux/virtio_ids.h>
+#include <linux/virtio_config.h>
+
+/* Feature bits */
+#define VIRTIO_BLK_F_BARRIER	0	/* Does host support barriers? */
+#define VIRTIO_BLK_F_SIZE_MAX	1	/* Indicates maximum segment size */
+#define VIRTIO_BLK_F_SEG_MAX	2	/* Indicates maximum # of segments */
+#define VIRTIO_BLK_F_GEOMETRY	4	/* Legacy geometry available  */
+#define VIRTIO_BLK_F_RO		5	/* Disk is read-only */
+#define VIRTIO_BLK_F_BLK_SIZE	6	/* Block size of disk is available*/
+#define VIRTIO_BLK_F_SCSI	7	/* Supports scsi command passthru */
+#define VIRTIO_BLK_F_WCE	9	/* Writeback mode enabled after reset */
+#define VIRTIO_BLK_F_TOPOLOGY	10	/* Topology information is available */
+#define VIRTIO_BLK_F_CONFIG_WCE	11	/* Writeback mode available in config */
+
+#ifndef __KERNEL__
+/* Old (deprecated) name for VIRTIO_BLK_F_WCE. */
+#define VIRTIO_BLK_F_FLUSH VIRTIO_BLK_F_WCE
+#endif
+
+#define VIRTIO_BLK_ID_BYTES	20	/* ID string length */
+
+struct virtio_blk_config {
+	/* The capacity (in 512-byte sectors). */
+	__u64 capacity;
+	/* The maximum segment size (if VIRTIO_BLK_F_SIZE_MAX) */
+	__u32 size_max;
+	/* The maximum number of segments (if VIRTIO_BLK_F_SEG_MAX) */
+	__u32 seg_max;
+	/* geometry the device (if VIRTIO_BLK_F_GEOMETRY) */
+	struct virtio_blk_geometry {
+		__u16 cylinders;
+		__u8 heads;
+		__u8 sectors;
+	} geometry;
+
+	/* block size of device (if VIRTIO_BLK_F_BLK_SIZE) */
+	__u32 blk_size;
+
+	/* the next 4 entries are guarded by VIRTIO_BLK_F_TOPOLOGY  */
+	/* exponent for physical block per logical block. */
+	__u8 physical_block_exp;
+	/* alignment offset in logical blocks. */
+	__u8 alignment_offset;
+	/* minimum I/O size without performance penalty in logical blocks. */
+	__u16 min_io_size;
+	/* optimal sustained I/O size in logical blocks. */
+	__u32 opt_io_size;
+
+	/* writeback mode (if VIRTIO_BLK_F_CONFIG_WCE) */
+	__u8 wce;
+} __attribute__((packed));
+
+/*
+ * Command types
+ *
+ * Usage is a bit tricky as some bits are used as flags and some are not.
+ *
+ * Rules:
+ *   VIRTIO_BLK_T_OUT may be combined with VIRTIO_BLK_T_SCSI_CMD or
+ *   VIRTIO_BLK_T_BARRIER.  VIRTIO_BLK_T_FLUSH is a command of its own
+ *   and may not be combined with any of the other flags.
+ */
+
+/* These two define direction. */
+#define VIRTIO_BLK_T_IN		0
+#define VIRTIO_BLK_T_OUT	1
+
+/* This bit says it's a scsi command, not an actual read or write. */
+#define VIRTIO_BLK_T_SCSI_CMD	2
+
+/* Cache flush command */
+#define VIRTIO_BLK_T_FLUSH	4
+
+/* Get device ID command */
+#define VIRTIO_BLK_T_GET_ID    8
+
+/* Barrier before this op. */
+#define VIRTIO_BLK_T_BARRIER	0x80000000
+
+/* This is the first element of the read scatter-gather list. */
+struct virtio_blk_outhdr {
+	/* VIRTIO_BLK_T* */
+	__u32 type;
+	/* io priority. */
+	__u32 ioprio;
+	/* Sector (ie. 512 byte offset) */
+	__u64 sector;
+};
+
+struct virtio_scsi_inhdr {
+	__u32 errors;
+	__u32 data_len;
+	__u32 sense_len;
+	__u32 residual;
+};
+
+/* And this is the final byte of the write scatter-gather list. */
+#define VIRTIO_BLK_S_OK		0
+#define VIRTIO_BLK_S_IOERR	1
+#define VIRTIO_BLK_S_UNSUPP	2
+#endif /* _LINUX_VIRTIO_BLK_H */
diff --git a/include/uapi/linux/virtio_config.h b/include/uapi/linux/virtio_config.h
new file mode 100644
index 00000000000..b7cda390fd0
--- /dev/null
+++ b/include/uapi/linux/virtio_config.h
@@ -0,0 +1,54 @@
+#ifndef _UAPI_LINUX_VIRTIO_CONFIG_H
+#define _UAPI_LINUX_VIRTIO_CONFIG_H
+/* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
+ * anyone can use the definitions to implement compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE. */
+
+/* Virtio devices use a standardized configuration space to define their
+ * features and pass configuration information, but each implementation can
+ * store and access that space differently. */
+#include <linux/types.h>
+
+/* Status byte for guest to report progress, and synchronize features. */
+/* We have seen device and processed generic fields (VIRTIO_CONFIG_F_VIRTIO) */
+#define VIRTIO_CONFIG_S_ACKNOWLEDGE	1
+/* We have found a driver for the device. */
+#define VIRTIO_CONFIG_S_DRIVER		2
+/* Driver has used its parts of the config, and is happy */
+#define VIRTIO_CONFIG_S_DRIVER_OK	4
+/* We've given up on this device. */
+#define VIRTIO_CONFIG_S_FAILED		0x80
+
+/* Some virtio feature bits (currently bits 28 through 31) are reserved for the
+ * transport being used (eg. virtio_ring), the rest are per-device feature
+ * bits. */
+#define VIRTIO_TRANSPORT_F_START	28
+#define VIRTIO_TRANSPORT_F_END		32
+
+/* Do we get callbacks when the ring is completely used, even if we've
+ * suppressed them? */
+#define VIRTIO_F_NOTIFY_ON_EMPTY	24
+
+#endif /* _UAPI_LINUX_VIRTIO_CONFIG_H */
diff --git a/include/uapi/linux/virtio_console.h b/include/uapi/linux/virtio_console.h
new file mode 100644
index 00000000000..ee13ab6c361
--- /dev/null
+++ b/include/uapi/linux/virtio_console.h
@@ -0,0 +1,74 @@
+/*
+ * This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
+ * anyone can use the definitions to implement compatible drivers/servers:
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * Copyright (C) Red Hat, Inc., 2009, 2010, 2011
+ * Copyright (C) Amit Shah <amit.shah@redhat.com>, 2009, 2010, 2011
+ */
+#ifndef _UAPI_LINUX_VIRTIO_CONSOLE_H
+#define _UAPI_LINUX_VIRTIO_CONSOLE_H
+#include <linux/types.h>
+#include <linux/virtio_ids.h>
+#include <linux/virtio_config.h>
+
+/* Feature bits */
+#define VIRTIO_CONSOLE_F_SIZE	0	/* Does host provide console size? */
+#define VIRTIO_CONSOLE_F_MULTIPORT 1	/* Does host provide multiple ports? */
+
+#define VIRTIO_CONSOLE_BAD_ID		(~(u32)0)
+
+struct virtio_console_config {
+	/* colums of the screens */
+	__u16 cols;
+	/* rows of the screens */
+	__u16 rows;
+	/* max. number of ports this device can hold */
+	__u32 max_nr_ports;
+} __attribute__((packed));
+
+/*
+ * A message that's passed between the Host and the Guest for a
+ * particular port.
+ */
+struct virtio_console_control {
+	__u32 id;		/* Port number */
+	__u16 event;		/* The kind of control event (see below) */
+	__u16 value;		/* Extra information for the key */
+};
+
+/* Some events for control messages */
+#define VIRTIO_CONSOLE_DEVICE_READY	0
+#define VIRTIO_CONSOLE_PORT_ADD		1
+#define VIRTIO_CONSOLE_PORT_REMOVE	2
+#define VIRTIO_CONSOLE_PORT_READY	3
+#define VIRTIO_CONSOLE_CONSOLE_PORT	4
+#define VIRTIO_CONSOLE_RESIZE		5
+#define VIRTIO_CONSOLE_PORT_OPEN	6
+#define VIRTIO_CONSOLE_PORT_NAME	7
+
+
+#endif /* _UAPI_LINUX_VIRTIO_CONSOLE_H */
diff --git a/include/uapi/linux/virtio_ids.h b/include/uapi/linux/virtio_ids.h
new file mode 100644
index 00000000000..270fb22c581
--- /dev/null
+++ b/include/uapi/linux/virtio_ids.h
@@ -0,0 +1,41 @@
+#ifndef _LINUX_VIRTIO_IDS_H
+#define _LINUX_VIRTIO_IDS_H
+/*
+ * Virtio IDs
+ *
+ * This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE. */
+
+#define VIRTIO_ID_NET		1 /* virtio net */
+#define VIRTIO_ID_BLOCK		2 /* virtio block */
+#define VIRTIO_ID_CONSOLE	3 /* virtio console */
+#define VIRTIO_ID_RNG		4 /* virtio rng */
+#define VIRTIO_ID_BALLOON	5 /* virtio balloon */
+#define VIRTIO_ID_RPMSG		7 /* virtio remote processor messaging */
+#define VIRTIO_ID_SCSI		8 /* virtio scsi */
+#define VIRTIO_ID_9P		9 /* 9p virtio console */
+
+#endif /* _LINUX_VIRTIO_IDS_H */
diff --git a/include/uapi/linux/virtio_net.h b/include/uapi/linux/virtio_net.h
new file mode 100644
index 00000000000..2470f541af5
--- /dev/null
+++ b/include/uapi/linux/virtio_net.h
@@ -0,0 +1,169 @@
+#ifndef _LINUX_VIRTIO_NET_H
+#define _LINUX_VIRTIO_NET_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE. */
+#include <linux/types.h>
+#include <linux/virtio_ids.h>
+#include <linux/virtio_config.h>
+#include <linux/if_ether.h>
+
+/* The feature bitmap for virtio net */
+#define VIRTIO_NET_F_CSUM	0	/* Host handles pkts w/ partial csum */
+#define VIRTIO_NET_F_GUEST_CSUM	1	/* Guest handles pkts w/ partial csum */
+#define VIRTIO_NET_F_MAC	5	/* Host has given MAC address. */
+#define VIRTIO_NET_F_GSO	6	/* Host handles pkts w/ any GSO type */
+#define VIRTIO_NET_F_GUEST_TSO4	7	/* Guest can handle TSOv4 in. */
+#define VIRTIO_NET_F_GUEST_TSO6	8	/* Guest can handle TSOv6 in. */
+#define VIRTIO_NET_F_GUEST_ECN	9	/* Guest can handle TSO[6] w/ ECN in. */
+#define VIRTIO_NET_F_GUEST_UFO	10	/* Guest can handle UFO in. */
+#define VIRTIO_NET_F_HOST_TSO4	11	/* Host can handle TSOv4 in. */
+#define VIRTIO_NET_F_HOST_TSO6	12	/* Host can handle TSOv6 in. */
+#define VIRTIO_NET_F_HOST_ECN	13	/* Host can handle TSO[6] w/ ECN in. */
+#define VIRTIO_NET_F_HOST_UFO	14	/* Host can handle UFO in. */
+#define VIRTIO_NET_F_MRG_RXBUF	15	/* Host can merge receive buffers. */
+#define VIRTIO_NET_F_STATUS	16	/* virtio_net_config.status available */
+#define VIRTIO_NET_F_CTRL_VQ	17	/* Control channel available */
+#define VIRTIO_NET_F_CTRL_RX	18	/* Control channel RX mode support */
+#define VIRTIO_NET_F_CTRL_VLAN	19	/* Control channel VLAN filtering */
+#define VIRTIO_NET_F_CTRL_RX_EXTRA 20	/* Extra RX mode control support */
+#define VIRTIO_NET_F_GUEST_ANNOUNCE 21	/* Guest can announce device on the
+					 * network */
+
+#define VIRTIO_NET_S_LINK_UP	1	/* Link is up */
+#define VIRTIO_NET_S_ANNOUNCE	2	/* Announcement is needed */
+
+struct virtio_net_config {
+	/* The config defining mac address (if VIRTIO_NET_F_MAC) */
+	__u8 mac[6];
+	/* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
+	__u16 status;
+} __attribute__((packed));
+
+/* This is the first element of the scatter-gather list.  If you don't
+ * specify GSO or CSUM features, you can simply ignore the header. */
+struct virtio_net_hdr {
+#define VIRTIO_NET_HDR_F_NEEDS_CSUM	1	// Use csum_start, csum_offset
+#define VIRTIO_NET_HDR_F_DATA_VALID	2	// Csum is valid
+	__u8 flags;
+#define VIRTIO_NET_HDR_GSO_NONE		0	// Not a GSO frame
+#define VIRTIO_NET_HDR_GSO_TCPV4	1	// GSO frame, IPv4 TCP (TSO)
+#define VIRTIO_NET_HDR_GSO_UDP		3	// GSO frame, IPv4 UDP (UFO)
+#define VIRTIO_NET_HDR_GSO_TCPV6	4	// GSO frame, IPv6 TCP
+#define VIRTIO_NET_HDR_GSO_ECN		0x80	// TCP has ECN set
+	__u8 gso_type;
+	__u16 hdr_len;		/* Ethernet + IP + tcp/udp hdrs */
+	__u16 gso_size;		/* Bytes to append to hdr_len per frame */
+	__u16 csum_start;	/* Position to start checksumming from */
+	__u16 csum_offset;	/* Offset after that to place checksum */
+};
+
+/* This is the version of the header to use when the MRG_RXBUF
+ * feature has been negotiated. */
+struct virtio_net_hdr_mrg_rxbuf {
+	struct virtio_net_hdr hdr;
+	__u16 num_buffers;	/* Number of merged rx buffers */
+};
+
+/*
+ * Control virtqueue data structures
+ *
+ * The control virtqueue expects a header in the first sg entry
+ * and an ack/status response in the last entry.  Data for the
+ * command goes in between.
+ */
+struct virtio_net_ctrl_hdr {
+	__u8 class;
+	__u8 cmd;
+} __attribute__((packed));
+
+typedef __u8 virtio_net_ctrl_ack;
+
+#define VIRTIO_NET_OK     0
+#define VIRTIO_NET_ERR    1
+
+/*
+ * Control the RX mode, ie. promisucous, allmulti, etc...
+ * All commands require an "out" sg entry containing a 1 byte
+ * state value, zero = disable, non-zero = enable.  Commands
+ * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature.
+ * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA.
+ */
+#define VIRTIO_NET_CTRL_RX    0
+ #define VIRTIO_NET_CTRL_RX_PROMISC      0
+ #define VIRTIO_NET_CTRL_RX_ALLMULTI     1
+ #define VIRTIO_NET_CTRL_RX_ALLUNI       2
+ #define VIRTIO_NET_CTRL_RX_NOMULTI      3
+ #define VIRTIO_NET_CTRL_RX_NOUNI        4
+ #define VIRTIO_NET_CTRL_RX_NOBCAST      5
+
+/*
+ * Control the MAC filter table.
+ *
+ * The MAC filter table is managed by the hypervisor, the guest should
+ * assume the size is infinite.  Filtering should be considered
+ * non-perfect, ie. based on hypervisor resources, the guest may
+ * received packets from sources not specified in the filter list.
+ *
+ * In addition to the class/cmd header, the TABLE_SET command requires
+ * two out scatterlists.  Each contains a 4 byte count of entries followed
+ * by a concatenated byte stream of the ETH_ALEN MAC addresses.  The
+ * first sg list contains unicast addresses, the second is for multicast.
+ * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature
+ * is available.
+ */
+struct virtio_net_ctrl_mac {
+	__u32 entries;
+	__u8 macs[][ETH_ALEN];
+} __attribute__((packed));
+
+#define VIRTIO_NET_CTRL_MAC    1
+ #define VIRTIO_NET_CTRL_MAC_TABLE_SET        0
+
+/*
+ * Control VLAN filtering
+ *
+ * The VLAN filter table is controlled via a simple ADD/DEL interface.
+ * VLAN IDs not added may be filterd by the hypervisor.  Del is the
+ * opposite of add.  Both commands expect an out entry containing a 2
+ * byte VLAN ID.  VLAN filterting is available with the
+ * VIRTIO_NET_F_CTRL_VLAN feature bit.
+ */
+#define VIRTIO_NET_CTRL_VLAN       2
+ #define VIRTIO_NET_CTRL_VLAN_ADD             0
+ #define VIRTIO_NET_CTRL_VLAN_DEL             1
+
+/*
+ * Control link announce acknowledgement
+ *
+ * The command VIRTIO_NET_CTRL_ANNOUNCE_ACK is used to indicate that
+ * driver has recevied the notification; device would clear the
+ * VIRTIO_NET_S_ANNOUNCE bit in the status field after it receives
+ * this command.
+ */
+#define VIRTIO_NET_CTRL_ANNOUNCE       3
+ #define VIRTIO_NET_CTRL_ANNOUNCE_ACK         0
+
+#endif /* _LINUX_VIRTIO_NET_H */
diff --git a/include/uapi/linux/virtio_pci.h b/include/uapi/linux/virtio_pci.h
new file mode 100644
index 00000000000..ea66f3f60d6
--- /dev/null
+++ b/include/uapi/linux/virtio_pci.h
@@ -0,0 +1,95 @@
+/*
+ * Virtio PCI driver
+ *
+ * This module allows virtio devices to be used over a virtual PCI device.
+ * This can be used with QEMU based VMMs like KVM or Xen.
+ *
+ * Copyright IBM Corp. 2007
+ *
+ * Authors:
+ *  Anthony Liguori  <aliguori@us.ibm.com>
+ *
+ * This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef _LINUX_VIRTIO_PCI_H
+#define _LINUX_VIRTIO_PCI_H
+
+#include <linux/virtio_config.h>
+
+/* A 32-bit r/o bitmask of the features supported by the host */
+#define VIRTIO_PCI_HOST_FEATURES	0
+
+/* A 32-bit r/w bitmask of features activated by the guest */
+#define VIRTIO_PCI_GUEST_FEATURES	4
+
+/* A 32-bit r/w PFN for the currently selected queue */
+#define VIRTIO_PCI_QUEUE_PFN		8
+
+/* A 16-bit r/o queue size for the currently selected queue */
+#define VIRTIO_PCI_QUEUE_NUM		12
+
+/* A 16-bit r/w queue selector */
+#define VIRTIO_PCI_QUEUE_SEL		14
+
+/* A 16-bit r/w queue notifier */
+#define VIRTIO_PCI_QUEUE_NOTIFY		16
+
+/* An 8-bit device status register.  */
+#define VIRTIO_PCI_STATUS		18
+
+/* An 8-bit r/o interrupt status register.  Reading the value will return the
+ * current contents of the ISR and will also clear it.  This is effectively
+ * a read-and-acknowledge. */
+#define VIRTIO_PCI_ISR			19
+
+/* The bit of the ISR which indicates a device configuration change. */
+#define VIRTIO_PCI_ISR_CONFIG		0x2
+
+/* MSI-X registers: only enabled if MSI-X is enabled. */
+/* A 16-bit vector for configuration changes. */
+#define VIRTIO_MSI_CONFIG_VECTOR        20
+/* A 16-bit vector for selected queue notifications. */
+#define VIRTIO_MSI_QUEUE_VECTOR         22
+/* Vector value used to disable MSI for queue */
+#define VIRTIO_MSI_NO_VECTOR            0xffff
+
+/* The remaining space is defined by each driver as the per-driver
+ * configuration space */
+#define VIRTIO_PCI_CONFIG(dev)		((dev)->msix_enabled ? 24 : 20)
+
+/* Virtio ABI version, this must match exactly */
+#define VIRTIO_PCI_ABI_VERSION		0
+
+/* How many bits to shift physical queue address written to QUEUE_PFN.
+ * 12 is historical, and due to x86 page size. */
+#define VIRTIO_PCI_QUEUE_ADDR_SHIFT	12
+
+/* The alignment to use between consumer and producer parts of vring.
+ * x86 pagesize again. */
+#define VIRTIO_PCI_VRING_ALIGN		4096
+#endif
diff --git a/include/uapi/linux/virtio_ring.h b/include/uapi/linux/virtio_ring.h
new file mode 100644
index 00000000000..a99f9b7caa6
--- /dev/null
+++ b/include/uapi/linux/virtio_ring.h
@@ -0,0 +1,163 @@
+#ifndef _UAPI_LINUX_VIRTIO_RING_H
+#define _UAPI_LINUX_VIRTIO_RING_H
+/* An interface for efficient virtio implementation, currently for use by KVM
+ * and lguest, but hopefully others soon.  Do NOT change this since it will
+ * break existing servers and clients.
+ *
+ * This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * Copyright Rusty Russell IBM Corporation 2007. */
+#include <linux/types.h>
+
+/* This marks a buffer as continuing via the next field. */
+#define VRING_DESC_F_NEXT	1
+/* This marks a buffer as write-only (otherwise read-only). */
+#define VRING_DESC_F_WRITE	2
+/* This means the buffer contains a list of buffer descriptors. */
+#define VRING_DESC_F_INDIRECT	4
+
+/* The Host uses this in used->flags to advise the Guest: don't kick me when
+ * you add a buffer.  It's unreliable, so it's simply an optimization.  Guest
+ * will still kick if it's out of buffers. */
+#define VRING_USED_F_NO_NOTIFY	1
+/* The Guest uses this in avail->flags to advise the Host: don't interrupt me
+ * when you consume a buffer.  It's unreliable, so it's simply an
+ * optimization.  */
+#define VRING_AVAIL_F_NO_INTERRUPT	1
+
+/* We support indirect buffer descriptors */
+#define VIRTIO_RING_F_INDIRECT_DESC	28
+
+/* The Guest publishes the used index for which it expects an interrupt
+ * at the end of the avail ring. Host should ignore the avail->flags field. */
+/* The Host publishes the avail index for which it expects a kick
+ * at the end of the used ring. Guest should ignore the used->flags field. */
+#define VIRTIO_RING_F_EVENT_IDX		29
+
+/* Virtio ring descriptors: 16 bytes.  These can chain together via "next". */
+struct vring_desc {
+	/* Address (guest-physical). */
+	__u64 addr;
+	/* Length. */
+	__u32 len;
+	/* The flags as indicated above. */
+	__u16 flags;
+	/* We chain unused descriptors via this, too */
+	__u16 next;
+};
+
+struct vring_avail {
+	__u16 flags;
+	__u16 idx;
+	__u16 ring[];
+};
+
+/* u32 is used here for ids for padding reasons. */
+struct vring_used_elem {
+	/* Index of start of used descriptor chain. */
+	__u32 id;
+	/* Total length of the descriptor chain which was used (written to) */
+	__u32 len;
+};
+
+struct vring_used {
+	__u16 flags;
+	__u16 idx;
+	struct vring_used_elem ring[];
+};
+
+struct vring {
+	unsigned int num;
+
+	struct vring_desc *desc;
+
+	struct vring_avail *avail;
+
+	struct vring_used *used;
+};
+
+/* The standard layout for the ring is a continuous chunk of memory which looks
+ * like this.  We assume num is a power of 2.
+ *
+ * struct vring
+ * {
+ *	// The actual descriptors (16 bytes each)
+ *	struct vring_desc desc[num];
+ *
+ *	// A ring of available descriptor heads with free-running index.
+ *	__u16 avail_flags;
+ *	__u16 avail_idx;
+ *	__u16 available[num];
+ *	__u16 used_event_idx;
+ *
+ *	// Padding to the next align boundary.
+ *	char pad[];
+ *
+ *	// A ring of used descriptor heads with free-running index.
+ *	__u16 used_flags;
+ *	__u16 used_idx;
+ *	struct vring_used_elem used[num];
+ *	__u16 avail_event_idx;
+ * };
+ */
+/* We publish the used event index at the end of the available ring, and vice
+ * versa. They are at the end for backwards compatibility. */
+#define vring_used_event(vr) ((vr)->avail->ring[(vr)->num])
+#define vring_avail_event(vr) (*(__u16 *)&(vr)->used->ring[(vr)->num])
+
+static inline void vring_init(struct vring *vr, unsigned int num, void *p,
+			      unsigned long align)
+{
+	vr->num = num;
+	vr->desc = p;
+	vr->avail = p + num*sizeof(struct vring_desc);
+	vr->used = (void *)(((unsigned long)&vr->avail->ring[num] + sizeof(__u16)
+		+ align-1) & ~(align - 1));
+}
+
+static inline unsigned vring_size(unsigned int num, unsigned long align)
+{
+	return ((sizeof(struct vring_desc) * num + sizeof(__u16) * (3 + num)
+		 + align - 1) & ~(align - 1))
+		+ sizeof(__u16) * 3 + sizeof(struct vring_used_elem) * num;
+}
+
+/* The following is used with USED_EVENT_IDX and AVAIL_EVENT_IDX */
+/* Assuming a given event_idx value from the other size, if
+ * we have just incremented index from old to new_idx,
+ * should we trigger an event? */
+static inline int vring_need_event(__u16 event_idx, __u16 new_idx, __u16 old)
+{
+	/* Note: Xen has similar logic for notification hold-off
+	 * in include/xen/interface/io/ring.h with req_event and req_prod
+	 * corresponding to event_idx + 1 and new_idx respectively.
+	 * Note also that req_event and req_prod in Xen start at 1,
+	 * event indexes in virtio start at 0. */
+	return (__u16)(new_idx - event_idx - 1) < (__u16)(new_idx - old);
+}
+
+#endif /* _UAPI_LINUX_VIRTIO_RING_H */
diff --git a/include/uapi/linux/virtio_rng.h b/include/uapi/linux/virtio_rng.h
new file mode 100644
index 00000000000..c4d5de896f0
--- /dev/null
+++ b/include/uapi/linux/virtio_rng.h
@@ -0,0 +1,8 @@
+#ifndef _LINUX_VIRTIO_RNG_H
+#define _LINUX_VIRTIO_RNG_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers. */
+#include <linux/virtio_ids.h>
+#include <linux/virtio_config.h>
+
+#endif /* _LINUX_VIRTIO_RNG_H */
diff --git a/include/uapi/linux/vt.h b/include/uapi/linux/vt.h
new file mode 100644
index 00000000000..4b59a26799a
--- /dev/null
+++ b/include/uapi/linux/vt.h
@@ -0,0 +1,90 @@
+#ifndef _UAPI_LINUX_VT_H
+#define _UAPI_LINUX_VT_H
+
+
+/*
+ * These constants are also useful for user-level apps (e.g., VC
+ * resizing).
+ */
+#define MIN_NR_CONSOLES 1       /* must be at least 1 */
+#define MAX_NR_CONSOLES	63	/* serial lines start at 64 */
+#define MAX_NR_USER_CONSOLES 63	/* must be root to allocate above this */
+		/* Note: the ioctl VT_GETSTATE does not work for
+		   consoles 16 and higher (since it returns a short) */
+
+/* 0x56 is 'V', to avoid collision with termios and kd */
+
+#define VT_OPENQRY	0x5600	/* find available vt */
+
+struct vt_mode {
+	char mode;		/* vt mode */
+	char waitv;		/* if set, hang on writes if not active */
+	short relsig;		/* signal to raise on release req */
+	short acqsig;		/* signal to raise on acquisition */
+	short frsig;		/* unused (set to 0) */
+};
+#define VT_GETMODE	0x5601	/* get mode of active vt */
+#define VT_SETMODE	0x5602	/* set mode of active vt */
+#define		VT_AUTO		0x00	/* auto vt switching */
+#define		VT_PROCESS	0x01	/* process controls switching */
+#define		VT_ACKACQ	0x02	/* acknowledge switch */
+
+struct vt_stat {
+	unsigned short v_active;	/* active vt */
+	unsigned short v_signal;	/* signal to send */
+	unsigned short v_state;		/* vt bitmask */
+};
+#define VT_GETSTATE	0x5603	/* get global vt state info */
+#define VT_SENDSIG	0x5604	/* signal to send to bitmask of vts */
+
+#define VT_RELDISP	0x5605	/* release display */
+
+#define VT_ACTIVATE	0x5606	/* make vt active */
+#define VT_WAITACTIVE	0x5607	/* wait for vt active */
+#define VT_DISALLOCATE	0x5608  /* free memory associated to vt */
+
+struct vt_sizes {
+	unsigned short v_rows;		/* number of rows */
+	unsigned short v_cols;		/* number of columns */
+	unsigned short v_scrollsize;	/* number of lines of scrollback */
+};
+#define VT_RESIZE	0x5609	/* set kernel's idea of screensize */
+
+struct vt_consize {
+	unsigned short v_rows;	/* number of rows */
+	unsigned short v_cols;	/* number of columns */
+	unsigned short v_vlin;	/* number of pixel rows on screen */
+	unsigned short v_clin;	/* number of pixel rows per character */
+	unsigned short v_vcol;	/* number of pixel columns on screen */
+	unsigned short v_ccol;	/* number of pixel columns per character */
+};
+#define VT_RESIZEX      0x560A  /* set kernel's idea of screensize + more */
+#define VT_LOCKSWITCH   0x560B  /* disallow vt switching */
+#define VT_UNLOCKSWITCH 0x560C  /* allow vt switching */
+#define VT_GETHIFONTMASK 0x560D  /* return hi font mask */
+
+struct vt_event {
+	unsigned int event;
+#define VT_EVENT_SWITCH		0x0001	/* Console switch */
+#define VT_EVENT_BLANK		0x0002	/* Screen blank */
+#define VT_EVENT_UNBLANK	0x0004	/* Screen unblank */
+#define VT_EVENT_RESIZE		0x0008	/* Resize display */
+#define VT_MAX_EVENT		0x000F
+	unsigned int oldev;		/* Old console */
+	unsigned int newev;		/* New console (if changing) */
+	unsigned int pad[4];		/* Padding for expansion */
+};
+
+#define VT_WAITEVENT	0x560E	/* Wait for an event */
+
+struct vt_setactivate {
+	unsigned int console;
+	struct vt_mode mode;
+};
+
+#define VT_SETACTIVATE	0x560F	/* Activate and set the mode of a console */
+
+
+#define vt_get_kmsg_redirect() vt_kmsg_redirect(-1)
+
+#endif /* _UAPI_LINUX_VT_H */
diff --git a/include/uapi/linux/wait.h b/include/uapi/linux/wait.h
new file mode 100644
index 00000000000..9393eead23e
--- /dev/null
+++ b/include/uapi/linux/wait.h
@@ -0,0 +1,21 @@
+#ifndef _UAPI_LINUX_WAIT_H
+#define _UAPI_LINUX_WAIT_H
+
+#define WNOHANG		0x00000001
+#define WUNTRACED	0x00000002
+#define WSTOPPED	WUNTRACED
+#define WEXITED		0x00000004
+#define WCONTINUED	0x00000008
+#define WNOWAIT		0x01000000	/* Don't reap, just poll status.  */
+
+#define __WNOTHREAD	0x20000000	/* Don't wait on children of other threads in this group */
+#define __WALL		0x40000000	/* Wait on all children, regardless of type */
+#define __WCLONE	0x80000000	/* Wait only on non-SIGCHLD children */
+
+/* First argument to waitid: */
+#define P_ALL		0
+#define P_PID		1
+#define P_PGID		2
+
+
+#endif /* _UAPI_LINUX_WAIT_H */
diff --git a/include/uapi/linux/wanrouter.h b/include/uapi/linux/wanrouter.h
new file mode 100644
index 00000000000..7617df2833d
--- /dev/null
+++ b/include/uapi/linux/wanrouter.h
@@ -0,0 +1,452 @@
+/*****************************************************************************
+* wanrouter.h	Definitions for the WAN Multiprotocol Router Module.
+*		This module provides API and common services for WAN Link
+*		Drivers and is completely hardware-independent.
+*
+* Author: 	Nenad Corbic <ncorbic@sangoma.com>
+*		Gideon Hack 	
+* Additions:	Arnaldo Melo
+*
+* Copyright:	(c) 1995-2000 Sangoma Technologies Inc.
+*
+*		This program is free software; you can redistribute it and/or
+*		modify it under the terms of the GNU General Public License
+*		as published by the Free Software Foundation; either version
+*		2 of the License, or (at your option) any later version.
+* ============================================================================
+* Jul 21, 2000  Nenad Corbic	Added WAN_FT1_READY State
+* Feb 24, 2000  Nenad Corbic    Added support for socket based x25api
+* Jan 28, 2000  Nenad Corbic    Added support for the ASYNC protocol.
+* Oct 04, 1999  Nenad Corbic 	Updated for 2.1.0 release
+* Jun 02, 1999  Gideon Hack	Added support for the S514 adapter.
+* May 23, 1999	Arnaldo Melo	Added local_addr to wanif_conf_t
+*				WAN_DISCONNECTING state added
+* Jul 20, 1998	David Fong	Added Inverse ARP options to 'wanif_conf_t'
+* Jun 12, 1998	David Fong	Added Cisco HDLC support.
+* Dec 16, 1997	Jaspreet Singh	Moved 'enable_IPX' and 'network_number' to
+*				'wanif_conf_t'
+* Dec 05, 1997	Jaspreet Singh	Added 'pap', 'chap' to 'wanif_conf_t'
+*				Added 'authenticator' to 'wan_ppp_conf_t'
+* Nov 06, 1997	Jaspreet Singh	Changed Router Driver version to 1.1 from 1.0
+* Oct 20, 1997	Jaspreet Singh	Added 'cir','bc','be' and 'mc' to 'wanif_conf_t'
+*				Added 'enable_IPX' and 'network_number' to 
+*				'wan_device_t'.  Also added defines for
+*				UDP PACKET TYPE, Interrupt test, critical values
+*				for RACE conditions.
+* Oct 05, 1997	Jaspreet Singh	Added 'dlci_num' and 'dlci[100]' to 
+*				'wan_fr_conf_t' to configure a list of dlci(s)
+*				for a NODE 
+* Jul 07, 1997	Jaspreet Singh	Added 'ttl' to 'wandev_conf_t' & 'wan_device_t'
+* May 29, 1997 	Jaspreet Singh	Added 'tx_int_enabled' to 'wan_device_t'
+* May 21, 1997	Jaspreet Singh	Added 'udp_port' to 'wan_device_t'
+* Apr 25, 1997  Farhan Thawar   Added 'udp_port' to 'wandev_conf_t'
+* Jan 16, 1997	Gene Kozin	router_devlist made public
+* Jan 02, 1997	Gene Kozin	Initial version (based on wanpipe.h).
+*****************************************************************************/
+
+#ifndef _UAPI_ROUTER_H
+#define _UAPI_ROUTER_H
+
+#define	ROUTER_NAME	"wanrouter"	/* in case we ever change it */
+#define	ROUTER_VERSION	1		/* version number */
+#define	ROUTER_RELEASE	1		/* release (minor version) number */
+#define	ROUTER_IOCTL	'W'		/* for IOCTL calls */
+#define	ROUTER_MAGIC	0x524D4157L	/* signature: 'WANR' reversed */
+
+/* IOCTL codes for /proc/router/<device> entries (up to 255) */
+enum router_ioctls
+{
+	ROUTER_SETUP	= ROUTER_IOCTL<<8,	/* configure device */
+	ROUTER_DOWN,				/* shut down device */
+	ROUTER_STAT,				/* get device status */
+	ROUTER_IFNEW,				/* add interface */
+	ROUTER_IFDEL,				/* delete interface */
+	ROUTER_IFSTAT,				/* get interface status */
+	ROUTER_USER	= (ROUTER_IOCTL<<8)+16,	/* driver-specific calls */
+	ROUTER_USER_MAX	= (ROUTER_IOCTL<<8)+31
+};
+
+/* identifiers for displaying proc file data for dual port adapters */
+#define PROC_DATA_PORT_0 0x8000	/* the data is for port 0 */
+#define PROC_DATA_PORT_1 0x8001	/* the data is for port 1 */
+
+/* NLPID for packet encapsulation (ISO/IEC TR 9577) */
+#define	NLPID_IP	0xCC	/* Internet Protocol Datagram */
+#define	NLPID_SNAP	0x80	/* IEEE Subnetwork Access Protocol */
+#define	NLPID_CLNP	0x81	/* ISO/IEC 8473 */
+#define	NLPID_ESIS	0x82	/* ISO/IEC 9542 */
+#define	NLPID_ISIS	0x83	/* ISO/IEC ISIS */
+#define	NLPID_Q933	0x08	/* CCITT Q.933 */
+
+/* Miscellaneous */
+#define	WAN_IFNAME_SZ	15	/* max length of the interface name */
+#define	WAN_DRVNAME_SZ	15	/* max length of the link driver name */
+#define	WAN_ADDRESS_SZ	31	/* max length of the WAN media address */
+#define USED_BY_FIELD	8	/* max length of the used by field */
+
+/* Defines for UDP PACKET TYPE */
+#define UDP_PTPIPE_TYPE 	0x01
+#define UDP_FPIPE_TYPE		0x02
+#define UDP_CPIPE_TYPE		0x03
+#define UDP_DRVSTATS_TYPE 	0x04
+#define UDP_INVALID_TYPE  	0x05
+
+/* Command return code */
+#define CMD_OK		0		/* normal firmware return code */
+#define CMD_TIMEOUT	0xFF		/* firmware command timed out */
+
+/* UDP Packet Management */
+#define UDP_PKT_FRM_STACK	0x00
+#define UDP_PKT_FRM_NETWORK	0x01
+
+/* Maximum interrupt test counter */
+#define MAX_INTR_TEST_COUNTER	100
+
+/* Critical Values for RACE conditions*/
+#define CRITICAL_IN_ISR		0xA1
+#define CRITICAL_INTR_HANDLED	0xB1
+
+/****** Data Types **********************************************************/
+
+/*----------------------------------------------------------------------------
+ * X.25-specific link-level configuration.
+ */
+typedef struct wan_x25_conf
+{
+	unsigned lo_pvc;	/* lowest permanent circuit number */
+	unsigned hi_pvc;	/* highest permanent circuit number */
+	unsigned lo_svc;	/* lowest switched circuit number */
+	unsigned hi_svc;	/* highest switched circuit number */
+	unsigned hdlc_window;	/* HDLC window size (1..7) */
+	unsigned pkt_window;	/* X.25 packet window size (1..7) */
+	unsigned t1;		/* HDLC timer T1, sec (1..30) */
+	unsigned t2;		/* HDLC timer T2, sec (0..29) */
+	unsigned t4;		/* HDLC supervisory frame timer = T4 * T1 */
+	unsigned n2;		/* HDLC retransmission limit (1..30) */
+	unsigned t10_t20;	/* X.25 RESTART timeout, sec (1..255) */
+	unsigned t11_t21;	/* X.25 CALL timeout, sec (1..255) */
+	unsigned t12_t22;	/* X.25 RESET timeout, sec (1..255) */
+	unsigned t13_t23;	/* X.25 CLEAR timeout, sec (1..255) */
+	unsigned t16_t26;	/* X.25 INTERRUPT timeout, sec (1..255) */
+	unsigned t28;		/* X.25 REGISTRATION timeout, sec (1..255) */
+	unsigned r10_r20;	/* RESTART retransmission limit (0..250) */
+	unsigned r12_r22;	/* RESET retransmission limit (0..250) */
+	unsigned r13_r23;	/* CLEAR retransmission limit (0..250) */
+	unsigned ccitt_compat;	/* compatibility mode: 1988/1984/1980 */
+	unsigned x25_conf_opt;   /* User defined x25 config optoins */
+	unsigned char LAPB_hdlc_only; /* Run in HDLC only mode */
+	unsigned char logging;   /* Control connection logging */  
+	unsigned char oob_on_modem; /* Whether to send modem status to the user app */
+} wan_x25_conf_t;
+
+/*----------------------------------------------------------------------------
+ * Frame relay specific link-level configuration.
+ */
+typedef struct wan_fr_conf
+{
+	unsigned signalling;	/* local in-channel signalling type */
+	unsigned t391;		/* link integrity verification timer */
+	unsigned t392;		/* polling verification timer */
+	unsigned n391;		/* full status polling cycle counter */
+	unsigned n392;		/* error threshold counter */
+	unsigned n393;		/* monitored events counter */
+	unsigned dlci_num;	/* number of DLCs (access node) */
+	unsigned  dlci[100];    /* List of all DLCIs */
+} wan_fr_conf_t;
+
+/*----------------------------------------------------------------------------
+ * PPP-specific link-level configuration.
+ */
+typedef struct wan_ppp_conf
+{
+	unsigned restart_tmr;	/* restart timer */
+	unsigned auth_rsrt_tmr;	/* authentication timer */
+	unsigned auth_wait_tmr;	/* authentication timer */
+	unsigned mdm_fail_tmr;	/* modem failure timer */
+	unsigned dtr_drop_tmr;	/* DTR drop timer */
+	unsigned connect_tmout;	/* connection timeout */
+	unsigned conf_retry;	/* max. retry */
+	unsigned term_retry;	/* max. retry */
+	unsigned fail_retry;	/* max. retry */
+	unsigned auth_retry;	/* max. retry */
+	unsigned auth_options;	/* authentication opt. */
+	unsigned ip_options;	/* IP options */
+	char	authenticator;	/* AUTHENTICATOR or not */
+	char	ip_mode;	/* Static/Host/Peer */
+} wan_ppp_conf_t;
+
+/*----------------------------------------------------------------------------
+ * CHDLC-specific link-level configuration.
+ */
+typedef struct wan_chdlc_conf
+{
+	unsigned char ignore_dcd;	/* Protocol options:		*/
+	unsigned char ignore_cts;	/*  Ignore these to determine	*/
+	unsigned char ignore_keepalive;	/*  link status (Yes or No)	*/
+	unsigned char hdlc_streaming;	/*  hdlc_streaming mode (Y/N) */
+	unsigned char receive_only;	/*  no transmit buffering (Y/N) */
+	unsigned keepalive_tx_tmr;	/* transmit keepalive timer */
+	unsigned keepalive_rx_tmr;	/* receive  keepalive timer */
+	unsigned keepalive_err_margin;	/* keepalive_error_tolerance */
+	unsigned slarp_timer;		/* SLARP request timer */
+} wan_chdlc_conf_t;
+
+
+/*----------------------------------------------------------------------------
+ * WAN device configuration. Passed to ROUTER_SETUP IOCTL.
+ */
+typedef struct wandev_conf
+{
+	unsigned magic;		/* magic number (for verification) */
+	unsigned config_id;	/* configuration structure identifier */
+				/****** hardware configuration ******/
+	unsigned ioport;	/* adapter I/O port base */
+	unsigned long maddr;	/* dual-port memory address */
+	unsigned msize;		/* dual-port memory size */
+	int irq;		/* interrupt request level */
+	int dma;		/* DMA request level */
+        char S514_CPU_no[1];	/* S514 PCI adapter CPU number ('A' or 'B') */
+        unsigned PCI_slot_no;	/* S514 PCI adapter slot number */
+	char auto_pci_cfg;	/* S515 PCI automatic slot detection */
+	char comm_port;		/* Communication Port (PRI=0, SEC=1) */ 
+	unsigned bps;		/* data transfer rate */
+	unsigned mtu;		/* maximum transmit unit size */
+        unsigned udp_port;      /* UDP port for management */
+	unsigned char ttl;	/* Time To Live for UDP security */
+	unsigned char ft1;	/* FT1 Configurator Option */
+        char interface;		/* RS-232/V.35, etc. */
+	char clocking;		/* external/internal */
+	char line_coding;	/* NRZ/NRZI/FM0/FM1, etc. */
+	char station;		/* DTE/DCE, primary/secondary, etc. */
+	char connection;	/* permanent/switched/on-demand */
+	char read_mode;		/* read mode: Polling or interrupt */
+	char receive_only;	/* disable tx buffers */
+	char tty;		/* Create a fake tty device */
+	unsigned tty_major;	/* Major number for wanpipe tty device */
+	unsigned tty_minor; 	/* Minor number for wanpipe tty device */
+	unsigned tty_mode;	/* TTY operation mode SYNC or ASYNC */
+	char backup;		/* Backup Mode */
+	unsigned hw_opt[4];	/* other hardware options */
+	unsigned reserved[4];
+				/****** arbitrary data ***************/
+	unsigned data_size;	/* data buffer size */
+	void* data;		/* data buffer, e.g. firmware */
+	union			/****** protocol-specific ************/
+	{
+		wan_x25_conf_t x25;	/* X.25 configuration */
+		wan_ppp_conf_t ppp;	/* PPP configuration */
+		wan_fr_conf_t fr;	/* frame relay configuration */
+		wan_chdlc_conf_t chdlc;	/* Cisco HDLC configuration */
+	} u;
+} wandev_conf_t;
+
+/* 'config_id' definitions */
+#define	WANCONFIG_X25	101	/* X.25 link */
+#define	WANCONFIG_FR	102	/* frame relay link */
+#define	WANCONFIG_PPP	103	/* synchronous PPP link */
+#define WANCONFIG_CHDLC	104	/* Cisco HDLC Link */
+#define WANCONFIG_BSC	105	/* BiSync Streaming */
+#define WANCONFIG_HDLC	106	/* HDLC Support */
+#define WANCONFIG_MPPP  107	/* Multi Port PPP over RAW CHDLC */
+
+/*
+ * Configuration options defines.
+ */
+/* general options */
+#define	WANOPT_OFF	0
+#define	WANOPT_ON	1
+#define	WANOPT_NO	0
+#define	WANOPT_YES	1
+
+/* intercace options */
+#define	WANOPT_RS232	0
+#define	WANOPT_V35	1
+
+/* data encoding options */
+#define	WANOPT_NRZ	0
+#define	WANOPT_NRZI	1
+#define	WANOPT_FM0	2
+#define	WANOPT_FM1	3
+
+/* link type options */
+#define	WANOPT_POINTTOPOINT	0	/* RTS always active */
+#define	WANOPT_MULTIDROP	1	/* RTS is active when transmitting */
+
+/* clocking options */
+#define	WANOPT_EXTERNAL	0
+#define	WANOPT_INTERNAL	1
+
+/* station options */
+#define	WANOPT_DTE		0
+#define	WANOPT_DCE		1
+#define	WANOPT_CPE		0
+#define	WANOPT_NODE		1
+#define	WANOPT_SECONDARY	0
+#define	WANOPT_PRIMARY		1
+
+/* connection options */
+#define	WANOPT_PERMANENT	0	/* DTR always active */
+#define	WANOPT_SWITCHED		1	/* use DTR to setup link (dial-up) */
+#define	WANOPT_ONDEMAND		2	/* activate DTR only before sending */
+
+/* frame relay in-channel signalling */
+#define	WANOPT_FR_ANSI		1	/* ANSI T1.617 Annex D */
+#define	WANOPT_FR_Q933		2	/* ITU Q.933A */
+#define	WANOPT_FR_LMI		3	/* LMI */
+
+/* PPP IP Mode Options */
+#define	WANOPT_PPP_STATIC	0
+#define	WANOPT_PPP_HOST		1
+#define	WANOPT_PPP_PEER		2
+
+/* ASY Mode Options */
+#define WANOPT_ONE 		1
+#define WANOPT_TWO		2
+#define WANOPT_ONE_AND_HALF	3
+
+#define WANOPT_NONE	0
+#define WANOPT_ODD      1
+#define WANOPT_EVEN	2
+
+/* CHDLC Protocol Options */
+/* DF Commented out for now.
+
+#define WANOPT_CHDLC_NO_DCD		IGNORE_DCD_FOR_LINK_STAT
+#define WANOPT_CHDLC_NO_CTS		IGNORE_CTS_FOR_LINK_STAT
+#define WANOPT_CHDLC_NO_KEEPALIVE	IGNORE_KPALV_FOR_LINK_STAT
+*/
+
+/* Port options */
+#define WANOPT_PRI 0
+#define WANOPT_SEC 1
+/* read mode */
+#define	WANOPT_INTR	0
+#define WANOPT_POLL	1
+
+
+#define WANOPT_TTY_SYNC  0
+#define WANOPT_TTY_ASYNC 1
+/*----------------------------------------------------------------------------
+ * WAN Link Status Info (for ROUTER_STAT IOCTL).
+ */
+typedef struct wandev_stat
+{
+	unsigned state;		/* link state */
+	unsigned ndev;		/* number of configured interfaces */
+
+	/* link/interface configuration */
+	unsigned connection;	/* permanent/switched/on-demand */
+	unsigned media_type;	/* Frame relay/PPP/X.25/SDLC, etc. */
+	unsigned mtu;		/* max. transmit unit for this device */
+
+	/* physical level statistics */
+	unsigned modem_status;	/* modem status */
+	unsigned rx_frames;	/* received frames count */
+	unsigned rx_overruns;	/* receiver overrun error count */
+	unsigned rx_crc_err;	/* receive CRC error count */
+	unsigned rx_aborts;	/* received aborted frames count */
+	unsigned rx_bad_length;	/* unexpetedly long/short frames count */
+	unsigned rx_dropped;	/* frames discarded at device level */
+	unsigned tx_frames;	/* transmitted frames count */
+	unsigned tx_underruns;	/* aborted transmissions (underruns) count */
+	unsigned tx_timeouts;	/* transmission timeouts */
+	unsigned tx_rejects;	/* other transmit errors */
+
+	/* media level statistics */
+	unsigned rx_bad_format;	/* frames with invalid format */
+	unsigned rx_bad_addr;	/* frames with invalid media address */
+	unsigned tx_retries;	/* frames re-transmitted */
+	unsigned reserved[16];	/* reserved for future use */
+} wandev_stat_t;
+
+/* 'state' defines */
+enum wan_states
+{
+	WAN_UNCONFIGURED,	/* link/channel is not configured */
+	WAN_DISCONNECTED,	/* link/channel is disconnected */
+	WAN_CONNECTING,		/* connection is in progress */
+	WAN_CONNECTED,		/* link/channel is operational */
+	WAN_LIMIT,		/* for verification only */
+	WAN_DUALPORT,		/* for Dual Port cards */
+	WAN_DISCONNECTING,
+	WAN_FT1_READY		/* FT1 Configurator Ready */
+};
+
+enum {
+	WAN_LOCAL_IP,
+	WAN_POINTOPOINT_IP,
+	WAN_NETMASK_IP,
+	WAN_BROADCAST_IP
+};
+
+/* 'modem_status' masks */
+#define	WAN_MODEM_CTS	0x0001	/* CTS line active */
+#define	WAN_MODEM_DCD	0x0002	/* DCD line active */
+#define	WAN_MODEM_DTR	0x0010	/* DTR line active */
+#define	WAN_MODEM_RTS	0x0020	/* RTS line active */
+
+/*----------------------------------------------------------------------------
+ * WAN interface (logical channel) configuration (for ROUTER_IFNEW IOCTL).
+ */
+typedef struct wanif_conf
+{
+	unsigned magic;			/* magic number */
+	unsigned config_id;		/* configuration identifier */
+	char name[WAN_IFNAME_SZ+1];	/* interface name, ASCIIZ */
+	char addr[WAN_ADDRESS_SZ+1];	/* media address, ASCIIZ */
+	char usedby[USED_BY_FIELD];	/* used by API or WANPIPE */
+	unsigned idle_timeout;		/* sec, before disconnecting */
+	unsigned hold_timeout;		/* sec, before re-connecting */
+	unsigned cir;			/* Committed Information Rate fwd,bwd*/
+	unsigned bc;			/* Committed Burst Size fwd, bwd */
+	unsigned be;			/* Excess Burst Size fwd, bwd */ 
+	unsigned char enable_IPX;	/* Enable or Disable IPX */
+	unsigned char inarp;		/* Send Inverse ARP requests Y/N */
+	unsigned inarp_interval;	/* sec, between InARP requests */
+	unsigned long network_number;	/* Network Number for IPX */
+	char mc;			/* Multicast on or off */
+	char local_addr[WAN_ADDRESS_SZ+1];/* local media address, ASCIIZ */
+	unsigned char port;		/* board port */
+	unsigned char protocol;		/* prococol used in this channel (TCPOX25 or X25) */
+	char pap;			/* PAP enabled or disabled */
+	char chap;			/* CHAP enabled or disabled */
+	unsigned char userid[511];	/* List of User Id */
+	unsigned char passwd[511];	/* List of passwords */
+	unsigned char sysname[31];	/* Name of the system */
+	unsigned char ignore_dcd;	/* Protocol options: */
+	unsigned char ignore_cts;	/*  Ignore these to determine */
+	unsigned char ignore_keepalive;	/*  link status (Yes or No) */
+	unsigned char hdlc_streaming;	/*  Hdlc streaming mode (Y/N) */
+	unsigned keepalive_tx_tmr;	/* transmit keepalive timer */
+	unsigned keepalive_rx_tmr;	/* receive  keepalive timer */
+	unsigned keepalive_err_margin;	/* keepalive_error_tolerance */
+	unsigned slarp_timer;		/* SLARP request timer */
+	unsigned char ttl;		/* Time To Live for UDP security */
+	char interface;			/* RS-232/V.35, etc. */
+	char clocking;			/* external/internal */
+	unsigned bps;			/* data transfer rate */
+	unsigned mtu;			/* maximum transmit unit size */
+	unsigned char if_down;		/* brind down interface when disconnected */
+	unsigned char gateway;		/* Is this interface a gateway */
+	unsigned char true_if_encoding;	/* Set the dev->type to true board protocol */
+
+	unsigned char asy_data_trans;     /* async API options */
+        unsigned char rts_hs_for_receive; /* async Protocol options */
+        unsigned char xon_xoff_hs_for_receive;
+	unsigned char xon_xoff_hs_for_transmit;
+	unsigned char dcd_hs_for_transmit;
+	unsigned char cts_hs_for_transmit;
+	unsigned char async_mode;
+	unsigned tx_bits_per_char;
+	unsigned rx_bits_per_char;
+	unsigned stop_bits;  
+	unsigned char parity;
+ 	unsigned break_timer;
+        unsigned inter_char_timer;
+	unsigned rx_complete_length;
+	unsigned xon_char;
+	unsigned xoff_char;
+	unsigned char receive_only;	/*  no transmit buffering (Y/N) */
+} wanif_conf_t;
+
+#endif /* _UAPI_ROUTER_H */
diff --git a/include/uapi/linux/watchdog.h b/include/uapi/linux/watchdog.h
new file mode 100644
index 00000000000..2babe72870b
--- /dev/null
+++ b/include/uapi/linux/watchdog.h
@@ -0,0 +1,57 @@
+/*
+ *	Generic watchdog defines. Derived from..
+ *
+ * Berkshire PC Watchdog Defines
+ * by Ken Hollis <khollis@bitgate.com>
+ *
+ */
+
+#ifndef _UAPI_LINUX_WATCHDOG_H
+#define _UAPI_LINUX_WATCHDOG_H
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+#define	WATCHDOG_IOCTL_BASE	'W'
+
+struct watchdog_info {
+	__u32 options;		/* Options the card/driver supports */
+	__u32 firmware_version;	/* Firmware version of the card */
+	__u8  identity[32];	/* Identity of the board */
+};
+
+#define	WDIOC_GETSUPPORT	_IOR(WATCHDOG_IOCTL_BASE, 0, struct watchdog_info)
+#define	WDIOC_GETSTATUS		_IOR(WATCHDOG_IOCTL_BASE, 1, int)
+#define	WDIOC_GETBOOTSTATUS	_IOR(WATCHDOG_IOCTL_BASE, 2, int)
+#define	WDIOC_GETTEMP		_IOR(WATCHDOG_IOCTL_BASE, 3, int)
+#define	WDIOC_SETOPTIONS	_IOR(WATCHDOG_IOCTL_BASE, 4, int)
+#define	WDIOC_KEEPALIVE		_IOR(WATCHDOG_IOCTL_BASE, 5, int)
+#define	WDIOC_SETTIMEOUT        _IOWR(WATCHDOG_IOCTL_BASE, 6, int)
+#define	WDIOC_GETTIMEOUT        _IOR(WATCHDOG_IOCTL_BASE, 7, int)
+#define	WDIOC_SETPRETIMEOUT	_IOWR(WATCHDOG_IOCTL_BASE, 8, int)
+#define	WDIOC_GETPRETIMEOUT	_IOR(WATCHDOG_IOCTL_BASE, 9, int)
+#define	WDIOC_GETTIMELEFT	_IOR(WATCHDOG_IOCTL_BASE, 10, int)
+
+#define	WDIOF_UNKNOWN		-1	/* Unknown flag error */
+#define	WDIOS_UNKNOWN		-1	/* Unknown status error */
+
+#define	WDIOF_OVERHEAT		0x0001	/* Reset due to CPU overheat */
+#define	WDIOF_FANFAULT		0x0002	/* Fan failed */
+#define	WDIOF_EXTERN1		0x0004	/* External relay 1 */
+#define	WDIOF_EXTERN2		0x0008	/* External relay 2 */
+#define	WDIOF_POWERUNDER	0x0010	/* Power bad/power fault */
+#define	WDIOF_CARDRESET		0x0020	/* Card previously reset the CPU */
+#define	WDIOF_POWEROVER		0x0040	/* Power over voltage */
+#define	WDIOF_SETTIMEOUT	0x0080  /* Set timeout (in seconds) */
+#define	WDIOF_MAGICCLOSE	0x0100	/* Supports magic close char */
+#define	WDIOF_PRETIMEOUT	0x0200  /* Pretimeout (in seconds), get/set */
+#define	WDIOF_ALARMONLY		0x0400	/* Watchdog triggers a management or
+					   other external alarm not a reboot */
+#define	WDIOF_KEEPALIVEPING	0x8000	/* Keep alive ping reply */
+
+#define	WDIOS_DISABLECARD	0x0001	/* Turn off the watchdog timer */
+#define	WDIOS_ENABLECARD	0x0002	/* Turn on the watchdog timer */
+#define	WDIOS_TEMPPANIC		0x0004	/* Kernel panic on temperature trip */
+
+
+#endif /* _UAPI_LINUX_WATCHDOG_H */
diff --git a/include/uapi/linux/wimax.h b/include/uapi/linux/wimax.h
new file mode 100644
index 00000000000..9f6b77af2f6
--- /dev/null
+++ b/include/uapi/linux/wimax.h
@@ -0,0 +1,239 @@
+/*
+ * Linux WiMax
+ * API for user space
+ *
+ *
+ * Copyright (C) 2007-2008 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <linux-wimax@intel.com>
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *  - Initial implementation
+ *
+ *
+ * This file declares the user/kernel protocol that is spoken over
+ * Generic Netlink, as well as any type declaration that is to be used
+ * by kernel and user space.
+ *
+ * It is intended for user space to clone it verbatim to use it as a
+ * primary reference for definitions.
+ *
+ * Stuff intended for kernel usage as well as full protocol and stack
+ * documentation is rooted in include/net/wimax.h.
+ */
+
+#ifndef __LINUX__WIMAX_H__
+#define __LINUX__WIMAX_H__
+
+#include <linux/types.h>
+
+enum {
+	/**
+	 * Version of the interface (unsigned decimal, MMm, max 25.5)
+	 * M - Major: change if removing or modifying an existing call.
+	 * m - minor: change when adding a new call
+	 */
+	WIMAX_GNL_VERSION = 01,
+	/* Generic NetLink attributes */
+	WIMAX_GNL_ATTR_INVALID = 0x00,
+	WIMAX_GNL_ATTR_MAX = 10,
+};
+
+
+/*
+ * Generic NetLink operations
+ *
+ * Most of these map to an API call; _OP_ stands for operation, _RP_
+ * for reply and _RE_ for report (aka: signal).
+ */
+enum {
+	WIMAX_GNL_OP_MSG_FROM_USER,	/* User to kernel message */
+	WIMAX_GNL_OP_MSG_TO_USER,	/* Kernel to user message */
+	WIMAX_GNL_OP_RFKILL,	/* Run wimax_rfkill() */
+	WIMAX_GNL_OP_RESET,	/* Run wimax_rfkill() */
+	WIMAX_GNL_RE_STATE_CHANGE,	/* Report: status change */
+	WIMAX_GNL_OP_STATE_GET,		/* Request for current state */
+};
+
+
+/* Message from user / to user */
+enum {
+	WIMAX_GNL_MSG_IFIDX = 1,
+	WIMAX_GNL_MSG_PIPE_NAME,
+	WIMAX_GNL_MSG_DATA,
+};
+
+
+/*
+ * wimax_rfkill()
+ *
+ * The state of the radio (ON/OFF) is mapped to the rfkill subsystem's
+ * switch state (DISABLED/ENABLED).
+ */
+enum wimax_rf_state {
+	WIMAX_RF_OFF = 0,	/* Radio is off, rfkill on/enabled */
+	WIMAX_RF_ON = 1,	/* Radio is on, rfkill off/disabled */
+	WIMAX_RF_QUERY = 2,
+};
+
+/* Attributes */
+enum {
+	WIMAX_GNL_RFKILL_IFIDX = 1,
+	WIMAX_GNL_RFKILL_STATE,
+};
+
+
+/* Attributes for wimax_reset() */
+enum {
+	WIMAX_GNL_RESET_IFIDX = 1,
+};
+
+/* Attributes for wimax_state_get() */
+enum {
+	WIMAX_GNL_STGET_IFIDX = 1,
+};
+
+/*
+ * Attributes for the Report State Change
+ *
+ * For now we just have the old and new states; new attributes might
+ * be added later on.
+ */
+enum {
+	WIMAX_GNL_STCH_IFIDX = 1,
+	WIMAX_GNL_STCH_STATE_OLD,
+	WIMAX_GNL_STCH_STATE_NEW,
+};
+
+
+/**
+ * enum wimax_st - The different states of a WiMAX device
+ * @__WIMAX_ST_NULL: The device structure has been allocated and zeroed,
+ *     but still wimax_dev_add() hasn't been called. There is no state.
+ *
+ * @WIMAX_ST_DOWN: The device has been registered with the WiMAX and
+ *     networking stacks, but it is not initialized (normally that is
+ *     done with 'ifconfig DEV up' [or equivalent], which can upload
+ *     firmware and enable communications with the device).
+ *     In this state, the device is powered down and using as less
+ *     power as possible.
+ *     This state is the default after a call to wimax_dev_add(). It
+ *     is ok to have drivers move directly to %WIMAX_ST_UNINITIALIZED
+ *     or %WIMAX_ST_RADIO_OFF in _probe() after the call to
+ *     wimax_dev_add().
+ *     It is recommended that the driver leaves this state when
+ *     calling 'ifconfig DEV up' and enters it back on 'ifconfig DEV
+ *     down'.
+ *
+ * @__WIMAX_ST_QUIESCING: The device is being torn down, so no API
+ *     operations are allowed to proceed except the ones needed to
+ *     complete the device clean up process.
+ *
+ * @WIMAX_ST_UNINITIALIZED: [optional] Communication with the device
+ *     is setup, but the device still requires some configuration
+ *     before being operational.
+ *     Some WiMAX API calls might work.
+ *
+ * @WIMAX_ST_RADIO_OFF: The device is fully up; radio is off (wether
+ *     by hardware or software switches).
+ *     It is recommended to always leave the device in this state
+ *     after initialization.
+ *
+ * @WIMAX_ST_READY: The device is fully up and radio is on.
+ *
+ * @WIMAX_ST_SCANNING: [optional] The device has been instructed to
+ *     scan. In this state, the device cannot be actively connected to
+ *     a network.
+ *
+ * @WIMAX_ST_CONNECTING: The device is connecting to a network. This
+ *     state exists because in some devices, the connect process can
+ *     include a number of negotiations between user space, kernel
+ *     space and the device. User space needs to know what the device
+ *     is doing. If the connect sequence in a device is atomic and
+ *     fast, the device can transition directly to CONNECTED
+ *
+ * @WIMAX_ST_CONNECTED: The device is connected to a network.
+ *
+ * @__WIMAX_ST_INVALID: This is an invalid state used to mark the
+ *     maximum numeric value of states.
+ *
+ * Description:
+ *
+ * Transitions from one state to another one are atomic and can only
+ * be caused in kernel space with wimax_state_change(). To read the
+ * state, use wimax_state_get().
+ *
+ * States starting with __ are internal and shall not be used or
+ * referred to by drivers or userspace. They look ugly, but that's the
+ * point -- if any use is made non-internal to the stack, it is easier
+ * to catch on review.
+ *
+ * All API operations [with well defined exceptions] will take the
+ * device mutex before starting and then check the state. If the state
+ * is %__WIMAX_ST_NULL, %WIMAX_ST_DOWN, %WIMAX_ST_UNINITIALIZED or
+ * %__WIMAX_ST_QUIESCING, it will drop the lock and quit with
+ * -%EINVAL, -%ENOMEDIUM, -%ENOTCONN or -%ESHUTDOWN.
+ *
+ * The order of the definitions is important, so we can do numerical
+ * comparisons (eg: < %WIMAX_ST_RADIO_OFF means the device is not ready
+ * to operate).
+ */
+/*
+ * The allowed state transitions are described in the table below
+ * (states in rows can go to states in columns where there is an X):
+ *
+ *                                  UNINI   RADIO READY SCAN CONNEC CONNEC
+ *             NULL DOWN QUIESCING TIALIZED  OFF        NING  TING   TED
+ * NULL         -    x
+ * DOWN              -      x        x       x
+ * QUIESCING         x      -
+ * UNINITIALIZED            x        -       x
+ * RADIO_OFF                x                -     x
+ * READY                    x                x     -     x     x      x
+ * SCANNING                 x                x     x     -     x      x
+ * CONNECTING               x                x     x     x     -      x
+ * CONNECTED                x                x     x                  -
+ *
+ * This table not available in kernel-doc because the formatting messes it up.
+ */
+ enum wimax_st {
+	__WIMAX_ST_NULL = 0,
+	WIMAX_ST_DOWN,
+	__WIMAX_ST_QUIESCING,
+	WIMAX_ST_UNINITIALIZED,
+	WIMAX_ST_RADIO_OFF,
+	WIMAX_ST_READY,
+	WIMAX_ST_SCANNING,
+	WIMAX_ST_CONNECTING,
+	WIMAX_ST_CONNECTED,
+	__WIMAX_ST_INVALID			/* Always keep last */
+};
+
+
+#endif /* #ifndef __LINUX__WIMAX_H__ */
diff --git a/include/uapi/linux/wireless.h b/include/uapi/linux/wireless.h
new file mode 100644
index 00000000000..c1592e3e403
--- /dev/null
+++ b/include/uapi/linux/wireless.h
@@ -0,0 +1,1128 @@
+/*
+ * This file define a set of standard wireless extensions
+ *
+ * Version :	22	16.3.07
+ *
+ * Authors :	Jean Tourrilhes - HPL - <jt@hpl.hp.com>
+ * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved.
+ */
+
+#ifndef _UAPI_LINUX_WIRELESS_H
+#define _UAPI_LINUX_WIRELESS_H
+
+/************************** DOCUMENTATION **************************/
+/*
+ * Initial APIs (1996 -> onward) :
+ * -----------------------------
+ * Basically, the wireless extensions are for now a set of standard ioctl
+ * call + /proc/net/wireless
+ *
+ * The entry /proc/net/wireless give statistics and information on the
+ * driver.
+ * This is better than having each driver having its entry because
+ * its centralised and we may remove the driver module safely.
+ *
+ * Ioctl are used to configure the driver and issue commands.  This is
+ * better than command line options of insmod because we may want to
+ * change dynamically (while the driver is running) some parameters.
+ *
+ * The ioctl mechanimsm are copied from standard devices ioctl.
+ * We have the list of command plus a structure descibing the
+ * data exchanged...
+ * Note that to add these ioctl, I was obliged to modify :
+ *	# net/core/dev.c (two place + add include)
+ *	# net/ipv4/af_inet.c (one place + add include)
+ *
+ * /proc/net/wireless is a copy of /proc/net/dev.
+ * We have a structure for data passed from the driver to /proc/net/wireless
+ * Too add this, I've modified :
+ *	# net/core/dev.c (two other places)
+ *	# include/linux/netdevice.h (one place)
+ *	# include/linux/proc_fs.h (one place)
+ *
+ * New driver API (2002 -> onward) :
+ * -------------------------------
+ * This file is only concerned with the user space API and common definitions.
+ * The new driver API is defined and documented in :
+ *	# include/net/iw_handler.h
+ *
+ * Note as well that /proc/net/wireless implementation has now moved in :
+ *	# net/core/wireless.c
+ *
+ * Wireless Events (2002 -> onward) :
+ * --------------------------------
+ * Events are defined at the end of this file, and implemented in :
+ *	# net/core/wireless.c
+ *
+ * Other comments :
+ * --------------
+ * Do not add here things that are redundant with other mechanisms
+ * (drivers init, ifconfig, /proc/net/dev, ...) and with are not
+ * wireless specific.
+ *
+ * These wireless extensions are not magic : each driver has to provide
+ * support for them...
+ *
+ * IMPORTANT NOTE : As everything in the kernel, this is very much a
+ * work in progress. Contact me if you have ideas of improvements...
+ */
+
+/***************************** INCLUDES *****************************/
+
+#include <linux/types.h>		/* for __u* and __s* typedefs */
+#include <linux/socket.h>		/* for "struct sockaddr" et al	*/
+#include <linux/if.h>			/* for IFNAMSIZ and co... */
+
+/***************************** VERSION *****************************/
+/*
+ * This constant is used to know the availability of the wireless
+ * extensions and to know which version of wireless extensions it is
+ * (there is some stuff that will be added in the future...)
+ * I just plan to increment with each new version.
+ */
+#define WIRELESS_EXT	22
+
+/*
+ * Changes :
+ *
+ * V2 to V3
+ * --------
+ *	Alan Cox start some incompatibles changes. I've integrated a bit more.
+ *	- Encryption renamed to Encode to avoid US regulation problems
+ *	- Frequency changed from float to struct to avoid problems on old 386
+ *
+ * V3 to V4
+ * --------
+ *	- Add sensitivity
+ *
+ * V4 to V5
+ * --------
+ *	- Missing encoding definitions in range
+ *	- Access points stuff
+ *
+ * V5 to V6
+ * --------
+ *	- 802.11 support (ESSID ioctls)
+ *
+ * V6 to V7
+ * --------
+ *	- define IW_ESSID_MAX_SIZE and IW_MAX_AP
+ *
+ * V7 to V8
+ * --------
+ *	- Changed my e-mail address
+ *	- More 802.11 support (nickname, rate, rts, frag)
+ *	- List index in frequencies
+ *
+ * V8 to V9
+ * --------
+ *	- Support for 'mode of operation' (ad-hoc, managed...)
+ *	- Support for unicast and multicast power saving
+ *	- Change encoding to support larger tokens (>64 bits)
+ *	- Updated iw_params (disable, flags) and use it for NWID
+ *	- Extracted iw_point from iwreq for clarity
+ *
+ * V9 to V10
+ * ---------
+ *	- Add PM capability to range structure
+ *	- Add PM modifier : MAX/MIN/RELATIVE
+ *	- Add encoding option : IW_ENCODE_NOKEY
+ *	- Add TxPower ioctls (work like TxRate)
+ *
+ * V10 to V11
+ * ----------
+ *	- Add WE version in range (help backward/forward compatibility)
+ *	- Add retry ioctls (work like PM)
+ *
+ * V11 to V12
+ * ----------
+ *	- Add SIOCSIWSTATS to get /proc/net/wireless programatically
+ *	- Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space
+ *	- Add new statistics (frag, retry, beacon)
+ *	- Add average quality (for user space calibration)
+ *
+ * V12 to V13
+ * ----------
+ *	- Document creation of new driver API.
+ *	- Extract union iwreq_data from struct iwreq (for new driver API).
+ *	- Rename SIOCSIWNAME as SIOCSIWCOMMIT
+ *
+ * V13 to V14
+ * ----------
+ *	- Wireless Events support : define struct iw_event
+ *	- Define additional specific event numbers
+ *	- Add "addr" and "param" fields in union iwreq_data
+ *	- AP scanning stuff (SIOCSIWSCAN and friends)
+ *
+ * V14 to V15
+ * ----------
+ *	- Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg
+ *	- Make struct iw_freq signed (both m & e), add explicit padding
+ *	- Add IWEVCUSTOM for driver specific event/scanning token
+ *	- Add IW_MAX_GET_SPY for driver returning a lot of addresses
+ *	- Add IW_TXPOW_RANGE for range of Tx Powers
+ *	- Add IWEVREGISTERED & IWEVEXPIRED events for Access Points
+ *	- Add IW_MODE_MONITOR for passive monitor
+ *
+ * V15 to V16
+ * ----------
+ *	- Increase the number of bitrates in iw_range to 32 (for 802.11g)
+ *	- Increase the number of frequencies in iw_range to 32 (for 802.11b+a)
+ *	- Reshuffle struct iw_range for increases, add filler
+ *	- Increase IW_MAX_AP to 64 for driver returning a lot of addresses
+ *	- Remove IW_MAX_GET_SPY because conflict with enhanced spy support
+ *	- Add SIOCSIWTHRSPY/SIOCGIWTHRSPY and "struct iw_thrspy"
+ *	- Add IW_ENCODE_TEMP and iw_range->encoding_login_index
+ *
+ * V16 to V17
+ * ----------
+ *	- Add flags to frequency -> auto/fixed
+ *	- Document (struct iw_quality *)->updated, add new flags (INVALID)
+ *	- Wireless Event capability in struct iw_range
+ *	- Add support for relative TxPower (yick !)
+ *
+ * V17 to V18 (From Jouni Malinen <j@w1.fi>)
+ * ----------
+ *	- Add support for WPA/WPA2
+ *	- Add extended encoding configuration (SIOCSIWENCODEEXT and
+ *	  SIOCGIWENCODEEXT)
+ *	- Add SIOCSIWGENIE/SIOCGIWGENIE
+ *	- Add SIOCSIWMLME
+ *	- Add SIOCSIWPMKSA
+ *	- Add struct iw_range bit field for supported encoding capabilities
+ *	- Add optional scan request parameters for SIOCSIWSCAN
+ *	- Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA
+ *	  related parameters (extensible up to 4096 parameter values)
+ *	- Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE,
+ *	  IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND
+ *
+ * V18 to V19
+ * ----------
+ *	- Remove (struct iw_point *)->pointer from events and streams
+ *	- Remove header includes to help user space
+ *	- Increase IW_ENCODING_TOKEN_MAX from 32 to 64
+ *	- Add IW_QUAL_ALL_UPDATED and IW_QUAL_ALL_INVALID macros
+ *	- Add explicit flag to tell stats are in dBm : IW_QUAL_DBM
+ *	- Add IW_IOCTL_IDX() and IW_EVENT_IDX() macros
+ *
+ * V19 to V20
+ * ----------
+ *	- RtNetlink requests support (SET/GET)
+ *
+ * V20 to V21
+ * ----------
+ *	- Remove (struct net_device *)->get_wireless_stats()
+ *	- Change length in ESSID and NICK to strlen() instead of strlen()+1
+ *	- Add IW_RETRY_SHORT/IW_RETRY_LONG retry modifiers
+ *	- Power/Retry relative values no longer * 100000
+ *	- Add explicit flag to tell stats are in 802.11k RCPI : IW_QUAL_RCPI
+ *
+ * V21 to V22
+ * ----------
+ *	- Prevent leaking of kernel space in stream on 64 bits.
+ */
+
+/**************************** CONSTANTS ****************************/
+
+/* -------------------------- IOCTL LIST -------------------------- */
+
+/* Wireless Identification */
+#define SIOCSIWCOMMIT	0x8B00		/* Commit pending changes to driver */
+#define SIOCGIWNAME	0x8B01		/* get name == wireless protocol */
+/* SIOCGIWNAME is used to verify the presence of Wireless Extensions.
+ * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"...
+ * Don't put the name of your driver there, it's useless. */
+
+/* Basic operations */
+#define SIOCSIWNWID	0x8B02		/* set network id (pre-802.11) */
+#define SIOCGIWNWID	0x8B03		/* get network id (the cell) */
+#define SIOCSIWFREQ	0x8B04		/* set channel/frequency (Hz) */
+#define SIOCGIWFREQ	0x8B05		/* get channel/frequency (Hz) */
+#define SIOCSIWMODE	0x8B06		/* set operation mode */
+#define SIOCGIWMODE	0x8B07		/* get operation mode */
+#define SIOCSIWSENS	0x8B08		/* set sensitivity (dBm) */
+#define SIOCGIWSENS	0x8B09		/* get sensitivity (dBm) */
+
+/* Informative stuff */
+#define SIOCSIWRANGE	0x8B0A		/* Unused */
+#define SIOCGIWRANGE	0x8B0B		/* Get range of parameters */
+#define SIOCSIWPRIV	0x8B0C		/* Unused */
+#define SIOCGIWPRIV	0x8B0D		/* get private ioctl interface info */
+#define SIOCSIWSTATS	0x8B0E		/* Unused */
+#define SIOCGIWSTATS	0x8B0F		/* Get /proc/net/wireless stats */
+/* SIOCGIWSTATS is strictly used between user space and the kernel, and
+ * is never passed to the driver (i.e. the driver will never see it). */
+
+/* Spy support (statistics per MAC address - used for Mobile IP support) */
+#define SIOCSIWSPY	0x8B10		/* set spy addresses */
+#define SIOCGIWSPY	0x8B11		/* get spy info (quality of link) */
+#define SIOCSIWTHRSPY	0x8B12		/* set spy threshold (spy event) */
+#define SIOCGIWTHRSPY	0x8B13		/* get spy threshold */
+
+/* Access Point manipulation */
+#define SIOCSIWAP	0x8B14		/* set access point MAC addresses */
+#define SIOCGIWAP	0x8B15		/* get access point MAC addresses */
+#define SIOCGIWAPLIST	0x8B17		/* Deprecated in favor of scanning */
+#define SIOCSIWSCAN	0x8B18		/* trigger scanning (list cells) */
+#define SIOCGIWSCAN	0x8B19		/* get scanning results */
+
+/* 802.11 specific support */
+#define SIOCSIWESSID	0x8B1A		/* set ESSID (network name) */
+#define SIOCGIWESSID	0x8B1B		/* get ESSID */
+#define SIOCSIWNICKN	0x8B1C		/* set node name/nickname */
+#define SIOCGIWNICKN	0x8B1D		/* get node name/nickname */
+/* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit
+ * within the 'iwreq' structure, so we need to use the 'data' member to
+ * point to a string in user space, like it is done for RANGE... */
+
+/* Other parameters useful in 802.11 and some other devices */
+#define SIOCSIWRATE	0x8B20		/* set default bit rate (bps) */
+#define SIOCGIWRATE	0x8B21		/* get default bit rate (bps) */
+#define SIOCSIWRTS	0x8B22		/* set RTS/CTS threshold (bytes) */
+#define SIOCGIWRTS	0x8B23		/* get RTS/CTS threshold (bytes) */
+#define SIOCSIWFRAG	0x8B24		/* set fragmentation thr (bytes) */
+#define SIOCGIWFRAG	0x8B25		/* get fragmentation thr (bytes) */
+#define SIOCSIWTXPOW	0x8B26		/* set transmit power (dBm) */
+#define SIOCGIWTXPOW	0x8B27		/* get transmit power (dBm) */
+#define SIOCSIWRETRY	0x8B28		/* set retry limits and lifetime */
+#define SIOCGIWRETRY	0x8B29		/* get retry limits and lifetime */
+
+/* Encoding stuff (scrambling, hardware security, WEP...) */
+#define SIOCSIWENCODE	0x8B2A		/* set encoding token & mode */
+#define SIOCGIWENCODE	0x8B2B		/* get encoding token & mode */
+/* Power saving stuff (power management, unicast and multicast) */
+#define SIOCSIWPOWER	0x8B2C		/* set Power Management settings */
+#define SIOCGIWPOWER	0x8B2D		/* get Power Management settings */
+
+/* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM).
+ * This ioctl uses struct iw_point and data buffer that includes IE id and len
+ * fields. More than one IE may be included in the request. Setting the generic
+ * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers
+ * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers
+ * are required to report the used IE as a wireless event, e.g., when
+ * associating with an AP. */
+#define SIOCSIWGENIE	0x8B30		/* set generic IE */
+#define SIOCGIWGENIE	0x8B31		/* get generic IE */
+
+/* WPA : IEEE 802.11 MLME requests */
+#define SIOCSIWMLME	0x8B16		/* request MLME operation; uses
+					 * struct iw_mlme */
+/* WPA : Authentication mode parameters */
+#define SIOCSIWAUTH	0x8B32		/* set authentication mode params */
+#define SIOCGIWAUTH	0x8B33		/* get authentication mode params */
+
+/* WPA : Extended version of encoding configuration */
+#define SIOCSIWENCODEEXT 0x8B34		/* set encoding token & mode */
+#define SIOCGIWENCODEEXT 0x8B35		/* get encoding token & mode */
+
+/* WPA2 : PMKSA cache management */
+#define SIOCSIWPMKSA	0x8B36		/* PMKSA cache operation */
+
+/* -------------------- DEV PRIVATE IOCTL LIST -------------------- */
+
+/* These 32 ioctl are wireless device private, for 16 commands.
+ * Each driver is free to use them for whatever purpose it chooses,
+ * however the driver *must* export the description of those ioctls
+ * with SIOCGIWPRIV and *must* use arguments as defined below.
+ * If you don't follow those rules, DaveM is going to hate you (reason :
+ * it make mixed 32/64bit operation impossible).
+ */
+#define SIOCIWFIRSTPRIV	0x8BE0
+#define SIOCIWLASTPRIV	0x8BFF
+/* Previously, we were using SIOCDEVPRIVATE, but we now have our
+ * separate range because of collisions with other tools such as
+ * 'mii-tool'.
+ * We now have 32 commands, so a bit more space ;-).
+ * Also, all 'even' commands are only usable by root and don't return the
+ * content of ifr/iwr to user (but you are not obliged to use the set/get
+ * convention, just use every other two command). More details in iwpriv.c.
+ * And I repeat : you are not forced to use them with iwpriv, but you
+ * must be compliant with it.
+ */
+
+/* ------------------------- IOCTL STUFF ------------------------- */
+
+/* The first and the last (range) */
+#define SIOCIWFIRST	0x8B00
+#define SIOCIWLAST	SIOCIWLASTPRIV		/* 0x8BFF */
+#define IW_IOCTL_IDX(cmd)	((cmd) - SIOCIWFIRST)
+#define IW_HANDLER(id, func)			\
+	[IW_IOCTL_IDX(id)] = func
+
+/* Odd : get (world access), even : set (root access) */
+#define IW_IS_SET(cmd)	(!((cmd) & 0x1))
+#define IW_IS_GET(cmd)	((cmd) & 0x1)
+
+/* ----------------------- WIRELESS EVENTS ----------------------- */
+/* Those are *NOT* ioctls, do not issue request on them !!! */
+/* Most events use the same identifier as ioctl requests */
+
+#define IWEVTXDROP	0x8C00		/* Packet dropped to excessive retry */
+#define IWEVQUAL	0x8C01		/* Quality part of statistics (scan) */
+#define IWEVCUSTOM	0x8C02		/* Driver specific ascii string */
+#define IWEVREGISTERED	0x8C03		/* Discovered a new node (AP mode) */
+#define IWEVEXPIRED	0x8C04		/* Expired a node (AP mode) */
+#define IWEVGENIE	0x8C05		/* Generic IE (WPA, RSN, WMM, ..)
+					 * (scan results); This includes id and
+					 * length fields. One IWEVGENIE may
+					 * contain more than one IE. Scan
+					 * results may contain one or more
+					 * IWEVGENIE events. */
+#define IWEVMICHAELMICFAILURE 0x8C06	/* Michael MIC failure
+					 * (struct iw_michaelmicfailure)
+					 */
+#define IWEVASSOCREQIE	0x8C07		/* IEs used in (Re)Association Request.
+					 * The data includes id and length
+					 * fields and may contain more than one
+					 * IE. This event is required in
+					 * Managed mode if the driver
+					 * generates its own WPA/RSN IE. This
+					 * should be sent just before
+					 * IWEVREGISTERED event for the
+					 * association. */
+#define IWEVASSOCRESPIE	0x8C08		/* IEs used in (Re)Association
+					 * Response. The data includes id and
+					 * length fields and may contain more
+					 * than one IE. This may be sent
+					 * between IWEVASSOCREQIE and
+					 * IWEVREGISTERED events for the
+					 * association. */
+#define IWEVPMKIDCAND	0x8C09		/* PMKID candidate for RSN
+					 * pre-authentication
+					 * (struct iw_pmkid_cand) */
+
+#define IWEVFIRST	0x8C00
+#define IW_EVENT_IDX(cmd)	((cmd) - IWEVFIRST)
+
+/* ------------------------- PRIVATE INFO ------------------------- */
+/*
+ * The following is used with SIOCGIWPRIV. It allow a driver to define
+ * the interface (name, type of data) for its private ioctl.
+ * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV
+ */
+
+#define IW_PRIV_TYPE_MASK	0x7000	/* Type of arguments */
+#define IW_PRIV_TYPE_NONE	0x0000
+#define IW_PRIV_TYPE_BYTE	0x1000	/* Char as number */
+#define IW_PRIV_TYPE_CHAR	0x2000	/* Char as character */
+#define IW_PRIV_TYPE_INT	0x4000	/* 32 bits int */
+#define IW_PRIV_TYPE_FLOAT	0x5000	/* struct iw_freq */
+#define IW_PRIV_TYPE_ADDR	0x6000	/* struct sockaddr */
+
+#define IW_PRIV_SIZE_FIXED	0x0800	/* Variable or fixed number of args */
+
+#define IW_PRIV_SIZE_MASK	0x07FF	/* Max number of those args */
+
+/*
+ * Note : if the number of args is fixed and the size < 16 octets,
+ * instead of passing a pointer we will put args in the iwreq struct...
+ */
+
+/* ----------------------- OTHER CONSTANTS ----------------------- */
+
+/* Maximum frequencies in the range struct */
+#define IW_MAX_FREQUENCIES	32
+/* Note : if you have something like 80 frequencies,
+ * don't increase this constant and don't fill the frequency list.
+ * The user will be able to set by channel anyway... */
+
+/* Maximum bit rates in the range struct */
+#define IW_MAX_BITRATES		32
+
+/* Maximum tx powers in the range struct */
+#define IW_MAX_TXPOWER		8
+/* Note : if you more than 8 TXPowers, just set the max and min or
+ * a few of them in the struct iw_range. */
+
+/* Maximum of address that you may set with SPY */
+#define IW_MAX_SPY		8
+
+/* Maximum of address that you may get in the
+   list of access points in range */
+#define IW_MAX_AP		64
+
+/* Maximum size of the ESSID and NICKN strings */
+#define IW_ESSID_MAX_SIZE	32
+
+/* Modes of operation */
+#define IW_MODE_AUTO	0	/* Let the driver decides */
+#define IW_MODE_ADHOC	1	/* Single cell network */
+#define IW_MODE_INFRA	2	/* Multi cell network, roaming, ... */
+#define IW_MODE_MASTER	3	/* Synchronisation master or Access Point */
+#define IW_MODE_REPEAT	4	/* Wireless Repeater (forwarder) */
+#define IW_MODE_SECOND	5	/* Secondary master/repeater (backup) */
+#define IW_MODE_MONITOR	6	/* Passive monitor (listen only) */
+#define IW_MODE_MESH	7	/* Mesh (IEEE 802.11s) network */
+
+/* Statistics flags (bitmask in updated) */
+#define IW_QUAL_QUAL_UPDATED	0x01	/* Value was updated since last read */
+#define IW_QUAL_LEVEL_UPDATED	0x02
+#define IW_QUAL_NOISE_UPDATED	0x04
+#define IW_QUAL_ALL_UPDATED	0x07
+#define IW_QUAL_DBM		0x08	/* Level + Noise are dBm */
+#define IW_QUAL_QUAL_INVALID	0x10	/* Driver doesn't provide value */
+#define IW_QUAL_LEVEL_INVALID	0x20
+#define IW_QUAL_NOISE_INVALID	0x40
+#define IW_QUAL_RCPI		0x80	/* Level + Noise are 802.11k RCPI */
+#define IW_QUAL_ALL_INVALID	0x70
+
+/* Frequency flags */
+#define IW_FREQ_AUTO		0x00	/* Let the driver decides */
+#define IW_FREQ_FIXED		0x01	/* Force a specific value */
+
+/* Maximum number of size of encoding token available
+ * they are listed in the range structure */
+#define IW_MAX_ENCODING_SIZES	8
+
+/* Maximum size of the encoding token in bytes */
+#define IW_ENCODING_TOKEN_MAX	64	/* 512 bits (for now) */
+
+/* Flags for encoding (along with the token) */
+#define IW_ENCODE_INDEX		0x00FF	/* Token index (if needed) */
+#define IW_ENCODE_FLAGS		0xFF00	/* Flags defined below */
+#define IW_ENCODE_MODE		0xF000	/* Modes defined below */
+#define IW_ENCODE_DISABLED	0x8000	/* Encoding disabled */
+#define IW_ENCODE_ENABLED	0x0000	/* Encoding enabled */
+#define IW_ENCODE_RESTRICTED	0x4000	/* Refuse non-encoded packets */
+#define IW_ENCODE_OPEN		0x2000	/* Accept non-encoded packets */
+#define IW_ENCODE_NOKEY		0x0800  /* Key is write only, so not present */
+#define IW_ENCODE_TEMP		0x0400  /* Temporary key */
+
+/* Power management flags available (along with the value, if any) */
+#define IW_POWER_ON		0x0000	/* No details... */
+#define IW_POWER_TYPE		0xF000	/* Type of parameter */
+#define IW_POWER_PERIOD		0x1000	/* Value is a period/duration of  */
+#define IW_POWER_TIMEOUT	0x2000	/* Value is a timeout (to go asleep) */
+#define IW_POWER_MODE		0x0F00	/* Power Management mode */
+#define IW_POWER_UNICAST_R	0x0100	/* Receive only unicast messages */
+#define IW_POWER_MULTICAST_R	0x0200	/* Receive only multicast messages */
+#define IW_POWER_ALL_R		0x0300	/* Receive all messages though PM */
+#define IW_POWER_FORCE_S	0x0400	/* Force PM procedure for sending unicast */
+#define IW_POWER_REPEATER	0x0800	/* Repeat broadcast messages in PM period */
+#define IW_POWER_MODIFIER	0x000F	/* Modify a parameter */
+#define IW_POWER_MIN		0x0001	/* Value is a minimum  */
+#define IW_POWER_MAX		0x0002	/* Value is a maximum */
+#define IW_POWER_RELATIVE	0x0004	/* Value is not in seconds/ms/us */
+
+/* Transmit Power flags available */
+#define IW_TXPOW_TYPE		0x00FF	/* Type of value */
+#define IW_TXPOW_DBM		0x0000	/* Value is in dBm */
+#define IW_TXPOW_MWATT		0x0001	/* Value is in mW */
+#define IW_TXPOW_RELATIVE	0x0002	/* Value is in arbitrary units */
+#define IW_TXPOW_RANGE		0x1000	/* Range of value between min/max */
+
+/* Retry limits and lifetime flags available */
+#define IW_RETRY_ON		0x0000	/* No details... */
+#define IW_RETRY_TYPE		0xF000	/* Type of parameter */
+#define IW_RETRY_LIMIT		0x1000	/* Maximum number of retries*/
+#define IW_RETRY_LIFETIME	0x2000	/* Maximum duration of retries in us */
+#define IW_RETRY_MODIFIER	0x00FF	/* Modify a parameter */
+#define IW_RETRY_MIN		0x0001	/* Value is a minimum  */
+#define IW_RETRY_MAX		0x0002	/* Value is a maximum */
+#define IW_RETRY_RELATIVE	0x0004	/* Value is not in seconds/ms/us */
+#define IW_RETRY_SHORT		0x0010	/* Value is for short packets  */
+#define IW_RETRY_LONG		0x0020	/* Value is for long packets */
+
+/* Scanning request flags */
+#define IW_SCAN_DEFAULT		0x0000	/* Default scan of the driver */
+#define IW_SCAN_ALL_ESSID	0x0001	/* Scan all ESSIDs */
+#define IW_SCAN_THIS_ESSID	0x0002	/* Scan only this ESSID */
+#define IW_SCAN_ALL_FREQ	0x0004	/* Scan all Frequencies */
+#define IW_SCAN_THIS_FREQ	0x0008	/* Scan only this Frequency */
+#define IW_SCAN_ALL_MODE	0x0010	/* Scan all Modes */
+#define IW_SCAN_THIS_MODE	0x0020	/* Scan only this Mode */
+#define IW_SCAN_ALL_RATE	0x0040	/* Scan all Bit-Rates */
+#define IW_SCAN_THIS_RATE	0x0080	/* Scan only this Bit-Rate */
+/* struct iw_scan_req scan_type */
+#define IW_SCAN_TYPE_ACTIVE 0
+#define IW_SCAN_TYPE_PASSIVE 1
+/* Maximum size of returned data */
+#define IW_SCAN_MAX_DATA	4096	/* In bytes */
+
+/* Scan capability flags - in (struct iw_range *)->scan_capa */
+#define IW_SCAN_CAPA_NONE		0x00
+#define IW_SCAN_CAPA_ESSID		0x01
+#define IW_SCAN_CAPA_BSSID		0x02
+#define IW_SCAN_CAPA_CHANNEL	0x04
+#define IW_SCAN_CAPA_MODE		0x08
+#define IW_SCAN_CAPA_RATE		0x10
+#define IW_SCAN_CAPA_TYPE		0x20
+#define IW_SCAN_CAPA_TIME		0x40
+
+/* Max number of char in custom event - use multiple of them if needed */
+#define IW_CUSTOM_MAX		256	/* In bytes */
+
+/* Generic information element */
+#define IW_GENERIC_IE_MAX	1024
+
+/* MLME requests (SIOCSIWMLME / struct iw_mlme) */
+#define IW_MLME_DEAUTH		0
+#define IW_MLME_DISASSOC	1
+#define IW_MLME_AUTH		2
+#define IW_MLME_ASSOC		3
+
+/* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */
+#define IW_AUTH_INDEX		0x0FFF
+#define IW_AUTH_FLAGS		0xF000
+/* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095)
+ * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the
+ * parameter that is being set/get to; value will be read/written to
+ * struct iw_param value field) */
+#define IW_AUTH_WPA_VERSION		0
+#define IW_AUTH_CIPHER_PAIRWISE		1
+#define IW_AUTH_CIPHER_GROUP		2
+#define IW_AUTH_KEY_MGMT		3
+#define IW_AUTH_TKIP_COUNTERMEASURES	4
+#define IW_AUTH_DROP_UNENCRYPTED	5
+#define IW_AUTH_80211_AUTH_ALG		6
+#define IW_AUTH_WPA_ENABLED		7
+#define IW_AUTH_RX_UNENCRYPTED_EAPOL	8
+#define IW_AUTH_ROAMING_CONTROL		9
+#define IW_AUTH_PRIVACY_INVOKED		10
+#define IW_AUTH_CIPHER_GROUP_MGMT	11
+#define IW_AUTH_MFP			12
+
+/* IW_AUTH_WPA_VERSION values (bit field) */
+#define IW_AUTH_WPA_VERSION_DISABLED	0x00000001
+#define IW_AUTH_WPA_VERSION_WPA		0x00000002
+#define IW_AUTH_WPA_VERSION_WPA2	0x00000004
+
+/* IW_AUTH_PAIRWISE_CIPHER, IW_AUTH_GROUP_CIPHER, and IW_AUTH_CIPHER_GROUP_MGMT
+ * values (bit field) */
+#define IW_AUTH_CIPHER_NONE	0x00000001
+#define IW_AUTH_CIPHER_WEP40	0x00000002
+#define IW_AUTH_CIPHER_TKIP	0x00000004
+#define IW_AUTH_CIPHER_CCMP	0x00000008
+#define IW_AUTH_CIPHER_WEP104	0x00000010
+#define IW_AUTH_CIPHER_AES_CMAC	0x00000020
+
+/* IW_AUTH_KEY_MGMT values (bit field) */
+#define IW_AUTH_KEY_MGMT_802_1X	1
+#define IW_AUTH_KEY_MGMT_PSK	2
+
+/* IW_AUTH_80211_AUTH_ALG values (bit field) */
+#define IW_AUTH_ALG_OPEN_SYSTEM	0x00000001
+#define IW_AUTH_ALG_SHARED_KEY	0x00000002
+#define IW_AUTH_ALG_LEAP	0x00000004
+
+/* IW_AUTH_ROAMING_CONTROL values */
+#define IW_AUTH_ROAMING_ENABLE	0	/* driver/firmware based roaming */
+#define IW_AUTH_ROAMING_DISABLE	1	/* user space program used for roaming
+					 * control */
+
+/* IW_AUTH_MFP (management frame protection) values */
+#define IW_AUTH_MFP_DISABLED	0	/* MFP disabled */
+#define IW_AUTH_MFP_OPTIONAL	1	/* MFP optional */
+#define IW_AUTH_MFP_REQUIRED	2	/* MFP required */
+
+/* SIOCSIWENCODEEXT definitions */
+#define IW_ENCODE_SEQ_MAX_SIZE	8
+/* struct iw_encode_ext ->alg */
+#define IW_ENCODE_ALG_NONE	0
+#define IW_ENCODE_ALG_WEP	1
+#define IW_ENCODE_ALG_TKIP	2
+#define IW_ENCODE_ALG_CCMP	3
+#define IW_ENCODE_ALG_PMK	4
+#define IW_ENCODE_ALG_AES_CMAC	5
+/* struct iw_encode_ext ->ext_flags */
+#define IW_ENCODE_EXT_TX_SEQ_VALID	0x00000001
+#define IW_ENCODE_EXT_RX_SEQ_VALID	0x00000002
+#define IW_ENCODE_EXT_GROUP_KEY		0x00000004
+#define IW_ENCODE_EXT_SET_TX_KEY	0x00000008
+
+/* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */
+#define IW_MICFAILURE_KEY_ID	0x00000003 /* Key ID 0..3 */
+#define IW_MICFAILURE_GROUP	0x00000004
+#define IW_MICFAILURE_PAIRWISE	0x00000008
+#define IW_MICFAILURE_STAKEY	0x00000010
+#define IW_MICFAILURE_COUNT	0x00000060 /* 1 or 2 (0 = count not supported)
+					    */
+
+/* Bit field values for enc_capa in struct iw_range */
+#define IW_ENC_CAPA_WPA		0x00000001
+#define IW_ENC_CAPA_WPA2	0x00000002
+#define IW_ENC_CAPA_CIPHER_TKIP	0x00000004
+#define IW_ENC_CAPA_CIPHER_CCMP	0x00000008
+#define IW_ENC_CAPA_4WAY_HANDSHAKE	0x00000010
+
+/* Event capability macros - in (struct iw_range *)->event_capa
+ * Because we have more than 32 possible events, we use an array of
+ * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */
+#define IW_EVENT_CAPA_BASE(cmd)		((cmd >= SIOCIWFIRSTPRIV) ? \
+					 (cmd - SIOCIWFIRSTPRIV + 0x60) : \
+					 (cmd - SIOCIWFIRST))
+#define IW_EVENT_CAPA_INDEX(cmd)	(IW_EVENT_CAPA_BASE(cmd) >> 5)
+#define IW_EVENT_CAPA_MASK(cmd)		(1 << (IW_EVENT_CAPA_BASE(cmd) & 0x1F))
+/* Event capability constants - event autogenerated by the kernel
+ * This list is valid for most 802.11 devices, customise as needed... */
+#define IW_EVENT_CAPA_K_0	(IW_EVENT_CAPA_MASK(0x8B04) | \
+				 IW_EVENT_CAPA_MASK(0x8B06) | \
+				 IW_EVENT_CAPA_MASK(0x8B1A))
+#define IW_EVENT_CAPA_K_1	(IW_EVENT_CAPA_MASK(0x8B2A))
+/* "Easy" macro to set events in iw_range (less efficient) */
+#define IW_EVENT_CAPA_SET(event_capa, cmd) (event_capa[IW_EVENT_CAPA_INDEX(cmd)] |= IW_EVENT_CAPA_MASK(cmd))
+#define IW_EVENT_CAPA_SET_KERNEL(event_capa) {event_capa[0] |= IW_EVENT_CAPA_K_0; event_capa[1] |= IW_EVENT_CAPA_K_1; }
+
+
+/****************************** TYPES ******************************/
+
+/* --------------------------- SUBTYPES --------------------------- */
+/*
+ *	Generic format for most parameters that fit in an int
+ */
+struct	iw_param
+{
+  __s32		value;		/* The value of the parameter itself */
+  __u8		fixed;		/* Hardware should not use auto select */
+  __u8		disabled;	/* Disable the feature */
+  __u16		flags;		/* Various specifc flags (if any) */
+};
+
+/*
+ *	For all data larger than 16 octets, we need to use a
+ *	pointer to memory allocated in user space.
+ */
+struct	iw_point
+{
+  void __user	*pointer;	/* Pointer to the data  (in user space) */
+  __u16		length;		/* number of fields or size in bytes */
+  __u16		flags;		/* Optional params */
+};
+
+
+/*
+ *	A frequency
+ *	For numbers lower than 10^9, we encode the number in 'm' and
+ *	set 'e' to 0
+ *	For number greater than 10^9, we divide it by the lowest power
+ *	of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')...
+ *	The power of 10 is in 'e', the result of the division is in 'm'.
+ */
+struct	iw_freq
+{
+	__s32		m;		/* Mantissa */
+	__s16		e;		/* Exponent */
+	__u8		i;		/* List index (when in range struct) */
+	__u8		flags;		/* Flags (fixed/auto) */
+};
+
+/*
+ *	Quality of the link
+ */
+struct	iw_quality
+{
+	__u8		qual;		/* link quality (%retries, SNR,
+					   %missed beacons or better...) */
+	__u8		level;		/* signal level (dBm) */
+	__u8		noise;		/* noise level (dBm) */
+	__u8		updated;	/* Flags to know if updated */
+};
+
+/*
+ *	Packet discarded in the wireless adapter due to
+ *	"wireless" specific problems...
+ *	Note : the list of counter and statistics in net_device_stats
+ *	is already pretty exhaustive, and you should use that first.
+ *	This is only additional stats...
+ */
+struct	iw_discarded
+{
+	__u32		nwid;		/* Rx : Wrong nwid/essid */
+	__u32		code;		/* Rx : Unable to code/decode (WEP) */
+	__u32		fragment;	/* Rx : Can't perform MAC reassembly */
+	__u32		retries;	/* Tx : Max MAC retries num reached */
+	__u32		misc;		/* Others cases */
+};
+
+/*
+ *	Packet/Time period missed in the wireless adapter due to
+ *	"wireless" specific problems...
+ */
+struct	iw_missed
+{
+	__u32		beacon;		/* Missed beacons/superframe */
+};
+
+/*
+ *	Quality range (for spy threshold)
+ */
+struct	iw_thrspy
+{
+	struct sockaddr		addr;		/* Source address (hw/mac) */
+	struct iw_quality	qual;		/* Quality of the link */
+	struct iw_quality	low;		/* Low threshold */
+	struct iw_quality	high;		/* High threshold */
+};
+
+/*
+ *	Optional data for scan request
+ *
+ *	Note: these optional parameters are controlling parameters for the
+ *	scanning behavior, these do not apply to getting scan results
+ *	(SIOCGIWSCAN). Drivers are expected to keep a local BSS table and
+ *	provide a merged results with all BSSes even if the previous scan
+ *	request limited scanning to a subset, e.g., by specifying an SSID.
+ *	Especially, scan results are required to include an entry for the
+ *	current BSS if the driver is in Managed mode and associated with an AP.
+ */
+struct	iw_scan_req
+{
+	__u8		scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */
+	__u8		essid_len;
+	__u8		num_channels; /* num entries in channel_list;
+				       * 0 = scan all allowed channels */
+	__u8		flags; /* reserved as padding; use zero, this may
+				* be used in the future for adding flags
+				* to request different scan behavior */
+	struct sockaddr	bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or
+				* individual address of a specific BSS */
+
+	/*
+	 * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using
+	 * the current ESSID. This allows scan requests for specific ESSID
+	 * without having to change the current ESSID and potentially breaking
+	 * the current association.
+	 */
+	__u8		essid[IW_ESSID_MAX_SIZE];
+
+	/*
+	 * Optional parameters for changing the default scanning behavior.
+	 * These are based on the MLME-SCAN.request from IEEE Std 802.11.
+	 * TU is 1.024 ms. If these are set to 0, driver is expected to use
+	 * reasonable default values. min_channel_time defines the time that
+	 * will be used to wait for the first reply on each channel. If no
+	 * replies are received, next channel will be scanned after this. If
+	 * replies are received, total time waited on the channel is defined by
+	 * max_channel_time.
+	 */
+	__u32		min_channel_time; /* in TU */
+	__u32		max_channel_time; /* in TU */
+
+	struct iw_freq	channel_list[IW_MAX_FREQUENCIES];
+};
+
+/* ------------------------- WPA SUPPORT ------------------------- */
+
+/*
+ *	Extended data structure for get/set encoding (this is used with
+ *	SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_*
+ *	flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and
+ *	only the data contents changes (key data -> this structure, including
+ *	key data).
+ *
+ *	If the new key is the first group key, it will be set as the default
+ *	TX key. Otherwise, default TX key index is only changed if
+ *	IW_ENCODE_EXT_SET_TX_KEY flag is set.
+ *
+ *	Key will be changed with SIOCSIWENCODEEXT in all cases except for
+ *	special "change TX key index" operation which is indicated by setting
+ *	key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY.
+ *
+ *	tx_seq/rx_seq are only used when respective
+ *	IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal
+ *	TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start
+ *	TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally
+ *	used only by an Authenticator (AP or an IBSS station) to get the
+ *	current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and
+ *	RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for
+ *	debugging/testing.
+ */
+struct	iw_encode_ext
+{
+	__u32		ext_flags; /* IW_ENCODE_EXT_* */
+	__u8		tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
+	__u8		rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
+	struct sockaddr	addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast
+			       * (group) keys or unicast address for
+			       * individual keys */
+	__u16		alg; /* IW_ENCODE_ALG_* */
+	__u16		key_len;
+	__u8		key[0];
+};
+
+/* SIOCSIWMLME data */
+struct	iw_mlme
+{
+	__u16		cmd; /* IW_MLME_* */
+	__u16		reason_code;
+	struct sockaddr	addr;
+};
+
+/* SIOCSIWPMKSA data */
+#define IW_PMKSA_ADD		1
+#define IW_PMKSA_REMOVE		2
+#define IW_PMKSA_FLUSH		3
+
+#define IW_PMKID_LEN	16
+
+struct	iw_pmksa
+{
+	__u32		cmd; /* IW_PMKSA_* */
+	struct sockaddr	bssid;
+	__u8		pmkid[IW_PMKID_LEN];
+};
+
+/* IWEVMICHAELMICFAILURE data */
+struct	iw_michaelmicfailure
+{
+	__u32		flags;
+	struct sockaddr	src_addr;
+	__u8		tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
+};
+
+/* IWEVPMKIDCAND data */
+#define IW_PMKID_CAND_PREAUTH	0x00000001 /* RNS pre-authentication enabled */
+struct	iw_pmkid_cand
+{
+	__u32		flags; /* IW_PMKID_CAND_* */
+	__u32		index; /* the smaller the index, the higher the
+				* priority */
+	struct sockaddr	bssid;
+};
+
+/* ------------------------ WIRELESS STATS ------------------------ */
+/*
+ * Wireless statistics (used for /proc/net/wireless)
+ */
+struct	iw_statistics
+{
+	__u16		status;		/* Status
+					 * - device dependent for now */
+
+	struct iw_quality	qual;		/* Quality of the link
+						 * (instant/mean/max) */
+	struct iw_discarded	discard;	/* Packet discarded counts */
+	struct iw_missed	miss;		/* Packet missed counts */
+};
+
+/* ------------------------ IOCTL REQUEST ------------------------ */
+/*
+ * This structure defines the payload of an ioctl, and is used 
+ * below.
+ *
+ * Note that this structure should fit on the memory footprint
+ * of iwreq (which is the same as ifreq), which mean a max size of
+ * 16 octets = 128 bits. Warning, pointers might be 64 bits wide...
+ * You should check this when increasing the structures defined
+ * above in this file...
+ */
+union	iwreq_data
+{
+	/* Config - generic */
+	char		name[IFNAMSIZ];
+	/* Name : used to verify the presence of  wireless extensions.
+	 * Name of the protocol/provider... */
+
+	struct iw_point	essid;		/* Extended network name */
+	struct iw_param	nwid;		/* network id (or domain - the cell) */
+	struct iw_freq	freq;		/* frequency or channel :
+					 * 0-1000 = channel
+					 * > 1000 = frequency in Hz */
+
+	struct iw_param	sens;		/* signal level threshold */
+	struct iw_param	bitrate;	/* default bit rate */
+	struct iw_param	txpower;	/* default transmit power */
+	struct iw_param	rts;		/* RTS threshold threshold */
+	struct iw_param	frag;		/* Fragmentation threshold */
+	__u32		mode;		/* Operation mode */
+	struct iw_param	retry;		/* Retry limits & lifetime */
+
+	struct iw_point	encoding;	/* Encoding stuff : tokens */
+	struct iw_param	power;		/* PM duration/timeout */
+	struct iw_quality qual;		/* Quality part of statistics */
+
+	struct sockaddr	ap_addr;	/* Access point address */
+	struct sockaddr	addr;		/* Destination address (hw/mac) */
+
+	struct iw_param	param;		/* Other small parameters */
+	struct iw_point	data;		/* Other large parameters */
+};
+
+/*
+ * The structure to exchange data for ioctl.
+ * This structure is the same as 'struct ifreq', but (re)defined for
+ * convenience...
+ * Do I need to remind you about structure size (32 octets) ?
+ */
+struct	iwreq 
+{
+	union
+	{
+		char	ifrn_name[IFNAMSIZ];	/* if name, e.g. "eth0" */
+	} ifr_ifrn;
+
+	/* Data part (defined just above) */
+	union	iwreq_data	u;
+};
+
+/* -------------------------- IOCTL DATA -------------------------- */
+/*
+ *	For those ioctl which want to exchange mode data that what could
+ *	fit in the above structure...
+ */
+
+/*
+ *	Range of parameters
+ */
+
+struct	iw_range
+{
+	/* Informative stuff (to choose between different interface) */
+	__u32		throughput;	/* To give an idea... */
+	/* In theory this value should be the maximum benchmarked
+	 * TCP/IP throughput, because with most of these devices the
+	 * bit rate is meaningless (overhead an co) to estimate how
+	 * fast the connection will go and pick the fastest one.
+	 * I suggest people to play with Netperf or any benchmark...
+	 */
+
+	/* NWID (or domain id) */
+	__u32		min_nwid;	/* Minimal NWID we are able to set */
+	__u32		max_nwid;	/* Maximal NWID we are able to set */
+
+	/* Old Frequency (backward compat - moved lower ) */
+	__u16		old_num_channels;
+	__u8		old_num_frequency;
+
+	/* Scan capabilities */
+	__u8		scan_capa; 	/* IW_SCAN_CAPA_* bit field */
+
+	/* Wireless event capability bitmasks */
+	__u32		event_capa[6];
+
+	/* signal level threshold range */
+	__s32		sensitivity;
+
+	/* Quality of link & SNR stuff */
+	/* Quality range (link, level, noise)
+	 * If the quality is absolute, it will be in the range [0 ; max_qual],
+	 * if the quality is dBm, it will be in the range [max_qual ; 0].
+	 * Don't forget that we use 8 bit arithmetics... */
+	struct iw_quality	max_qual;	/* Quality of the link */
+	/* This should contain the average/typical values of the quality
+	 * indicator. This should be the threshold between a "good" and
+	 * a "bad" link (example : monitor going from green to orange).
+	 * Currently, user space apps like quality monitors don't have any
+	 * way to calibrate the measurement. With this, they can split
+	 * the range between 0 and max_qual in different quality level
+	 * (using a geometric subdivision centered on the average).
+	 * I expect that people doing the user space apps will feedback
+	 * us on which value we need to put in each driver... */
+	struct iw_quality	avg_qual;	/* Quality of the link */
+
+	/* Rates */
+	__u8		num_bitrates;	/* Number of entries in the list */
+	__s32		bitrate[IW_MAX_BITRATES];	/* list, in bps */
+
+	/* RTS threshold */
+	__s32		min_rts;	/* Minimal RTS threshold */
+	__s32		max_rts;	/* Maximal RTS threshold */
+
+	/* Frag threshold */
+	__s32		min_frag;	/* Minimal frag threshold */
+	__s32		max_frag;	/* Maximal frag threshold */
+
+	/* Power Management duration & timeout */
+	__s32		min_pmp;	/* Minimal PM period */
+	__s32		max_pmp;	/* Maximal PM period */
+	__s32		min_pmt;	/* Minimal PM timeout */
+	__s32		max_pmt;	/* Maximal PM timeout */
+	__u16		pmp_flags;	/* How to decode max/min PM period */
+	__u16		pmt_flags;	/* How to decode max/min PM timeout */
+	__u16		pm_capa;	/* What PM options are supported */
+
+	/* Encoder stuff */
+	__u16	encoding_size[IW_MAX_ENCODING_SIZES];	/* Different token sizes */
+	__u8	num_encoding_sizes;	/* Number of entry in the list */
+	__u8	max_encoding_tokens;	/* Max number of tokens */
+	/* For drivers that need a "login/passwd" form */
+	__u8	encoding_login_index;	/* token index for login token */
+
+	/* Transmit power */
+	__u16		txpower_capa;	/* What options are supported */
+	__u8		num_txpower;	/* Number of entries in the list */
+	__s32		txpower[IW_MAX_TXPOWER];	/* list, in bps */
+
+	/* Wireless Extension version info */
+	__u8		we_version_compiled;	/* Must be WIRELESS_EXT */
+	__u8		we_version_source;	/* Last update of source */
+
+	/* Retry limits and lifetime */
+	__u16		retry_capa;	/* What retry options are supported */
+	__u16		retry_flags;	/* How to decode max/min retry limit */
+	__u16		r_time_flags;	/* How to decode max/min retry life */
+	__s32		min_retry;	/* Minimal number of retries */
+	__s32		max_retry;	/* Maximal number of retries */
+	__s32		min_r_time;	/* Minimal retry lifetime */
+	__s32		max_r_time;	/* Maximal retry lifetime */
+
+	/* Frequency */
+	__u16		num_channels;	/* Number of channels [0; num - 1] */
+	__u8		num_frequency;	/* Number of entry in the list */
+	struct iw_freq	freq[IW_MAX_FREQUENCIES];	/* list */
+	/* Note : this frequency list doesn't need to fit channel numbers,
+	 * because each entry contain its channel index */
+
+	__u32		enc_capa;	/* IW_ENC_CAPA_* bit field */
+};
+
+/*
+ * Private ioctl interface information
+ */
+ 
+struct	iw_priv_args
+{
+	__u32		cmd;		/* Number of the ioctl to issue */
+	__u16		set_args;	/* Type and number of args */
+	__u16		get_args;	/* Type and number of args */
+	char		name[IFNAMSIZ];	/* Name of the extension */
+};
+
+/* ----------------------- WIRELESS EVENTS ----------------------- */
+/*
+ * Wireless events are carried through the rtnetlink socket to user
+ * space. They are encapsulated in the IFLA_WIRELESS field of
+ * a RTM_NEWLINK message.
+ */
+
+/*
+ * A Wireless Event. Contains basically the same data as the ioctl...
+ */
+struct iw_event
+{
+	__u16		len;			/* Real length of this stuff */
+	__u16		cmd;			/* Wireless IOCTL */
+	union iwreq_data	u;		/* IOCTL fixed payload */
+};
+
+/* Size of the Event prefix (including padding and alignement junk) */
+#define IW_EV_LCP_LEN	(sizeof(struct iw_event) - sizeof(union iwreq_data))
+/* Size of the various events */
+#define IW_EV_CHAR_LEN	(IW_EV_LCP_LEN + IFNAMSIZ)
+#define IW_EV_UINT_LEN	(IW_EV_LCP_LEN + sizeof(__u32))
+#define IW_EV_FREQ_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_freq))
+#define IW_EV_PARAM_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_param))
+#define IW_EV_ADDR_LEN	(IW_EV_LCP_LEN + sizeof(struct sockaddr))
+#define IW_EV_QUAL_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_quality))
+
+/* iw_point events are special. First, the payload (extra data) come at
+ * the end of the event, so they are bigger than IW_EV_POINT_LEN. Second,
+ * we omit the pointer, so start at an offset. */
+#define IW_EV_POINT_OFF (((char *) &(((struct iw_point *) NULL)->length)) - \
+			  (char *) NULL)
+#define IW_EV_POINT_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_point) - \
+			 IW_EV_POINT_OFF)
+
+
+/* Size of the Event prefix when packed in stream */
+#define IW_EV_LCP_PK_LEN	(4)
+/* Size of the various events when packed in stream */
+#define IW_EV_CHAR_PK_LEN	(IW_EV_LCP_PK_LEN + IFNAMSIZ)
+#define IW_EV_UINT_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(__u32))
+#define IW_EV_FREQ_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct iw_freq))
+#define IW_EV_PARAM_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct iw_param))
+#define IW_EV_ADDR_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct sockaddr))
+#define IW_EV_QUAL_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct iw_quality))
+#define IW_EV_POINT_PK_LEN	(IW_EV_LCP_PK_LEN + 4)
+
+#endif /* _UAPI_LINUX_WIRELESS_H */
diff --git a/include/uapi/linux/x25.h b/include/uapi/linux/x25.h
new file mode 100644
index 00000000000..810cce6737e
--- /dev/null
+++ b/include/uapi/linux/x25.h
@@ -0,0 +1,152 @@
+/*
+ * These are the public elements of the Linux kernel X.25 implementation.
+ *
+ * 	History
+ *	mar/20/00	Daniela Squassoni Disabling/enabling of facilities 
+ *					  negotiation.
+ *	apr/02/05	Shaun Pereira Selective sub address matching with
+ *					call user data
+ */
+
+#ifndef	X25_KERNEL_H
+#define	X25_KERNEL_H
+
+#include <linux/types.h>
+#include <linux/socket.h>
+
+#define	SIOCX25GSUBSCRIP	(SIOCPROTOPRIVATE + 0)
+#define	SIOCX25SSUBSCRIP	(SIOCPROTOPRIVATE + 1)
+#define	SIOCX25GFACILITIES	(SIOCPROTOPRIVATE + 2)
+#define	SIOCX25SFACILITIES	(SIOCPROTOPRIVATE + 3)
+#define	SIOCX25GCALLUSERDATA	(SIOCPROTOPRIVATE + 4)
+#define	SIOCX25SCALLUSERDATA	(SIOCPROTOPRIVATE + 5)
+#define	SIOCX25GCAUSEDIAG	(SIOCPROTOPRIVATE + 6)
+#define SIOCX25SCUDMATCHLEN	(SIOCPROTOPRIVATE + 7)
+#define SIOCX25CALLACCPTAPPRV   (SIOCPROTOPRIVATE + 8)
+#define SIOCX25SENDCALLACCPT    (SIOCPROTOPRIVATE + 9)
+#define SIOCX25GDTEFACILITIES (SIOCPROTOPRIVATE + 10)
+#define SIOCX25SDTEFACILITIES (SIOCPROTOPRIVATE + 11)
+#define SIOCX25SCAUSEDIAG	(SIOCPROTOPRIVATE + 12)
+
+/*
+ *	Values for {get,set}sockopt.
+ */
+#define	X25_QBITINCL		1
+
+/*
+ *	X.25 Packet Size values.
+ */
+#define	X25_PS16		4
+#define	X25_PS32		5
+#define	X25_PS64		6
+#define	X25_PS128		7
+#define	X25_PS256		8
+#define	X25_PS512		9
+#define	X25_PS1024		10
+#define	X25_PS2048		11
+#define	X25_PS4096		12
+
+/*
+ * An X.121 address, it is held as ASCII text, null terminated, up to 15
+ * digits and a null terminator.
+ */
+struct x25_address {
+	char x25_addr[16];
+};
+
+/*
+ *	Linux X.25 Address structure, used for bind, and connect mostly.
+ */
+struct sockaddr_x25 {
+	__kernel_sa_family_t sx25_family;	/* Must be AF_X25 */
+	struct x25_address sx25_addr;		/* X.121 Address */
+};
+
+/*
+ *	DTE/DCE subscription options.
+ *
+ *      As this is missing lots of options, user should expect major
+ *	changes of this structure in 2.5.x which might break compatibilty.
+ *      The somewhat ugly dimension 200-sizeof() is needed to maintain
+ *	backward compatibility.
+ */
+struct x25_subscrip_struct {
+	char device[200-sizeof(unsigned long)];
+	unsigned long	global_facil_mask;	/* 0 to disable negotiation */
+	unsigned int	extended;
+};
+
+/* values for above global_facil_mask */
+
+#define	X25_MASK_REVERSE	0x01	
+#define	X25_MASK_THROUGHPUT	0x02
+#define	X25_MASK_PACKET_SIZE	0x04
+#define	X25_MASK_WINDOW_SIZE	0x08
+
+#define X25_MASK_CALLING_AE 0x10
+#define X25_MASK_CALLED_AE 0x20
+
+
+/*
+ *	Routing table control structure.
+ */
+struct x25_route_struct {
+	struct x25_address address;
+	unsigned int	   sigdigits;
+	char		   device[200];
+};
+
+/*
+ *	Facilities structure.
+ */
+struct x25_facilities {
+	unsigned int	winsize_in, winsize_out;
+	unsigned int	pacsize_in, pacsize_out;
+	unsigned int	throughput;
+	unsigned int	reverse;
+};
+
+/*
+* ITU DTE facilities
+* Only the called and calling address
+* extension are currently implemented.
+* The rest are in place to avoid the struct
+* changing size if someone needs them later
+*/
+
+struct x25_dte_facilities {
+	__u16 delay_cumul;
+	__u16 delay_target;
+	__u16 delay_max;
+	__u8 min_throughput;
+	__u8 expedited;
+	__u8 calling_len;
+	__u8 called_len;
+	__u8 calling_ae[20];
+	__u8 called_ae[20];
+};
+
+/*
+ *	Call User Data structure.
+ */
+struct x25_calluserdata {
+	unsigned int	cudlength;
+	unsigned char	cuddata[128];
+};
+
+/*
+ *	Call clearing Cause and Diagnostic structure.
+ */
+struct x25_causediag {
+	unsigned char	cause;
+	unsigned char	diagnostic;
+};
+
+/*
+ *	Further optional call user data match length selection
+ */
+struct x25_subaddr {
+	unsigned int cudmatchlength;
+};
+
+#endif
diff --git a/include/uapi/linux/xattr.h b/include/uapi/linux/xattr.h
new file mode 100644
index 00000000000..26607bd965f
--- /dev/null
+++ b/include/uapi/linux/xattr.h
@@ -0,0 +1,64 @@
+/*
+  File: linux/xattr.h
+
+  Extended attributes handling.
+
+  Copyright (C) 2001 by Andreas Gruenbacher <a.gruenbacher@computer.org>
+  Copyright (c) 2001-2002 Silicon Graphics, Inc.  All Rights Reserved.
+  Copyright (c) 2004 Red Hat, Inc., James Morris <jmorris@redhat.com>
+*/
+#ifndef _UAPI_LINUX_XATTR_H
+#define _UAPI_LINUX_XATTR_H
+
+#define XATTR_CREATE	0x1	/* set value, fail if attr already exists */
+#define XATTR_REPLACE	0x2	/* set value, fail if attr does not exist */
+
+/* Namespaces */
+#define XATTR_OS2_PREFIX "os2."
+#define XATTR_OS2_PREFIX_LEN (sizeof (XATTR_OS2_PREFIX) - 1)
+
+#define XATTR_SECURITY_PREFIX	"security."
+#define XATTR_SECURITY_PREFIX_LEN (sizeof (XATTR_SECURITY_PREFIX) - 1)
+
+#define XATTR_SYSTEM_PREFIX "system."
+#define XATTR_SYSTEM_PREFIX_LEN (sizeof (XATTR_SYSTEM_PREFIX) - 1)
+
+#define XATTR_TRUSTED_PREFIX "trusted."
+#define XATTR_TRUSTED_PREFIX_LEN (sizeof (XATTR_TRUSTED_PREFIX) - 1)
+
+#define XATTR_USER_PREFIX "user."
+#define XATTR_USER_PREFIX_LEN (sizeof (XATTR_USER_PREFIX) - 1)
+
+/* Security namespace */
+#define XATTR_EVM_SUFFIX "evm"
+#define XATTR_NAME_EVM XATTR_SECURITY_PREFIX XATTR_EVM_SUFFIX
+
+#define XATTR_IMA_SUFFIX "ima"
+#define XATTR_NAME_IMA XATTR_SECURITY_PREFIX XATTR_IMA_SUFFIX
+
+#define XATTR_SELINUX_SUFFIX "selinux"
+#define XATTR_NAME_SELINUX XATTR_SECURITY_PREFIX XATTR_SELINUX_SUFFIX
+
+#define XATTR_SMACK_SUFFIX "SMACK64"
+#define XATTR_SMACK_IPIN "SMACK64IPIN"
+#define XATTR_SMACK_IPOUT "SMACK64IPOUT"
+#define XATTR_SMACK_EXEC "SMACK64EXEC"
+#define XATTR_SMACK_TRANSMUTE "SMACK64TRANSMUTE"
+#define XATTR_SMACK_MMAP "SMACK64MMAP"
+#define XATTR_NAME_SMACK XATTR_SECURITY_PREFIX XATTR_SMACK_SUFFIX
+#define XATTR_NAME_SMACKIPIN	XATTR_SECURITY_PREFIX XATTR_SMACK_IPIN
+#define XATTR_NAME_SMACKIPOUT	XATTR_SECURITY_PREFIX XATTR_SMACK_IPOUT
+#define XATTR_NAME_SMACKEXEC	XATTR_SECURITY_PREFIX XATTR_SMACK_EXEC
+#define XATTR_NAME_SMACKTRANSMUTE XATTR_SECURITY_PREFIX XATTR_SMACK_TRANSMUTE
+#define XATTR_NAME_SMACKMMAP XATTR_SECURITY_PREFIX XATTR_SMACK_MMAP
+
+#define XATTR_CAPS_SUFFIX "capability"
+#define XATTR_NAME_CAPS XATTR_SECURITY_PREFIX XATTR_CAPS_SUFFIX
+
+#define XATTR_POSIX_ACL_ACCESS  "posix_acl_access"
+#define XATTR_NAME_POSIX_ACL_ACCESS XATTR_SYSTEM_PREFIX XATTR_POSIX_ACL_ACCESS
+#define XATTR_POSIX_ACL_DEFAULT  "posix_acl_default"
+#define XATTR_NAME_POSIX_ACL_DEFAULT XATTR_SYSTEM_PREFIX XATTR_POSIX_ACL_DEFAULT
+
+
+#endif /* _UAPI_LINUX_XATTR_H */
diff --git a/include/uapi/linux/xfrm.h b/include/uapi/linux/xfrm.h
new file mode 100644
index 00000000000..28e493b5b94
--- /dev/null
+++ b/include/uapi/linux/xfrm.h
@@ -0,0 +1,506 @@
+#ifndef _LINUX_XFRM_H
+#define _LINUX_XFRM_H
+
+#include <linux/types.h>
+
+/* All of the structures in this file may not change size as they are
+ * passed into the kernel from userspace via netlink sockets.
+ */
+
+/* Structure to encapsulate addresses. I do not want to use
+ * "standard" structure. My apologies.
+ */
+typedef union {
+	__be32		a4;
+	__be32		a6[4];
+} xfrm_address_t;
+
+/* Ident of a specific xfrm_state. It is used on input to lookup
+ * the state by (spi,daddr,ah/esp) or to store information about
+ * spi, protocol and tunnel address on output.
+ */
+struct xfrm_id {
+	xfrm_address_t	daddr;
+	__be32		spi;
+	__u8		proto;
+};
+
+struct xfrm_sec_ctx {
+	__u8	ctx_doi;
+	__u8	ctx_alg;
+	__u16	ctx_len;
+	__u32	ctx_sid;
+	char	ctx_str[0];
+};
+
+/* Security Context Domains of Interpretation */
+#define XFRM_SC_DOI_RESERVED 0
+#define XFRM_SC_DOI_LSM 1
+
+/* Security Context Algorithms */
+#define XFRM_SC_ALG_RESERVED 0
+#define XFRM_SC_ALG_SELINUX 1
+
+/* Selector, used as selector both on policy rules (SPD) and SAs. */
+
+struct xfrm_selector {
+	xfrm_address_t	daddr;
+	xfrm_address_t	saddr;
+	__be16	dport;
+	__be16	dport_mask;
+	__be16	sport;
+	__be16	sport_mask;
+	__u16	family;
+	__u8	prefixlen_d;
+	__u8	prefixlen_s;
+	__u8	proto;
+	int	ifindex;
+	__kernel_uid32_t	user;
+};
+
+#define XFRM_INF (~(__u64)0)
+
+struct xfrm_lifetime_cfg {
+	__u64	soft_byte_limit;
+	__u64	hard_byte_limit;
+	__u64	soft_packet_limit;
+	__u64	hard_packet_limit;
+	__u64	soft_add_expires_seconds;
+	__u64	hard_add_expires_seconds;
+	__u64	soft_use_expires_seconds;
+	__u64	hard_use_expires_seconds;
+};
+
+struct xfrm_lifetime_cur {
+	__u64	bytes;
+	__u64	packets;
+	__u64	add_time;
+	__u64	use_time;
+};
+
+struct xfrm_replay_state {
+	__u32	oseq;
+	__u32	seq;
+	__u32	bitmap;
+};
+
+#define XFRMA_REPLAY_ESN_MAX	4096
+
+struct xfrm_replay_state_esn {
+	unsigned int	bmp_len;
+	__u32		oseq;
+	__u32		seq;
+	__u32		oseq_hi;
+	__u32		seq_hi;
+	__u32		replay_window;
+	__u32		bmp[0];
+};
+
+struct xfrm_algo {
+	char		alg_name[64];
+	unsigned int	alg_key_len;    /* in bits */
+	char		alg_key[0];
+};
+
+struct xfrm_algo_auth {
+	char		alg_name[64];
+	unsigned int	alg_key_len;    /* in bits */
+	unsigned int	alg_trunc_len;  /* in bits */
+	char		alg_key[0];
+};
+
+struct xfrm_algo_aead {
+	char		alg_name[64];
+	unsigned int	alg_key_len;	/* in bits */
+	unsigned int	alg_icv_len;	/* in bits */
+	char		alg_key[0];
+};
+
+struct xfrm_stats {
+	__u32	replay_window;
+	__u32	replay;
+	__u32	integrity_failed;
+};
+
+enum {
+	XFRM_POLICY_TYPE_MAIN	= 0,
+	XFRM_POLICY_TYPE_SUB	= 1,
+	XFRM_POLICY_TYPE_MAX	= 2,
+	XFRM_POLICY_TYPE_ANY	= 255
+};
+
+enum {
+	XFRM_POLICY_IN	= 0,
+	XFRM_POLICY_OUT	= 1,
+	XFRM_POLICY_FWD	= 2,
+	XFRM_POLICY_MASK = 3,
+	XFRM_POLICY_MAX	= 3
+};
+
+enum {
+	XFRM_SHARE_ANY,		/* No limitations */
+	XFRM_SHARE_SESSION,	/* For this session only */
+	XFRM_SHARE_USER,	/* For this user only */
+	XFRM_SHARE_UNIQUE	/* Use once */
+};
+
+#define XFRM_MODE_TRANSPORT 0
+#define XFRM_MODE_TUNNEL 1
+#define XFRM_MODE_ROUTEOPTIMIZATION 2
+#define XFRM_MODE_IN_TRIGGER 3
+#define XFRM_MODE_BEET 4
+#define XFRM_MODE_MAX 5
+
+/* Netlink configuration messages.  */
+enum {
+	XFRM_MSG_BASE = 0x10,
+
+	XFRM_MSG_NEWSA = 0x10,
+#define XFRM_MSG_NEWSA XFRM_MSG_NEWSA
+	XFRM_MSG_DELSA,
+#define XFRM_MSG_DELSA XFRM_MSG_DELSA
+	XFRM_MSG_GETSA,
+#define XFRM_MSG_GETSA XFRM_MSG_GETSA
+
+	XFRM_MSG_NEWPOLICY,
+#define XFRM_MSG_NEWPOLICY XFRM_MSG_NEWPOLICY
+	XFRM_MSG_DELPOLICY,
+#define XFRM_MSG_DELPOLICY XFRM_MSG_DELPOLICY
+	XFRM_MSG_GETPOLICY,
+#define XFRM_MSG_GETPOLICY XFRM_MSG_GETPOLICY
+
+	XFRM_MSG_ALLOCSPI,
+#define XFRM_MSG_ALLOCSPI XFRM_MSG_ALLOCSPI
+	XFRM_MSG_ACQUIRE,
+#define XFRM_MSG_ACQUIRE XFRM_MSG_ACQUIRE
+	XFRM_MSG_EXPIRE,
+#define XFRM_MSG_EXPIRE XFRM_MSG_EXPIRE
+
+	XFRM_MSG_UPDPOLICY,
+#define XFRM_MSG_UPDPOLICY XFRM_MSG_UPDPOLICY
+	XFRM_MSG_UPDSA,
+#define XFRM_MSG_UPDSA XFRM_MSG_UPDSA
+
+	XFRM_MSG_POLEXPIRE,
+#define XFRM_MSG_POLEXPIRE XFRM_MSG_POLEXPIRE
+
+	XFRM_MSG_FLUSHSA,
+#define XFRM_MSG_FLUSHSA XFRM_MSG_FLUSHSA
+	XFRM_MSG_FLUSHPOLICY,
+#define XFRM_MSG_FLUSHPOLICY XFRM_MSG_FLUSHPOLICY
+
+	XFRM_MSG_NEWAE,
+#define XFRM_MSG_NEWAE XFRM_MSG_NEWAE
+	XFRM_MSG_GETAE,
+#define XFRM_MSG_GETAE XFRM_MSG_GETAE
+
+	XFRM_MSG_REPORT,
+#define XFRM_MSG_REPORT XFRM_MSG_REPORT
+
+	XFRM_MSG_MIGRATE,
+#define XFRM_MSG_MIGRATE XFRM_MSG_MIGRATE
+
+	XFRM_MSG_NEWSADINFO,
+#define XFRM_MSG_NEWSADINFO XFRM_MSG_NEWSADINFO
+	XFRM_MSG_GETSADINFO,
+#define XFRM_MSG_GETSADINFO XFRM_MSG_GETSADINFO
+
+	XFRM_MSG_NEWSPDINFO,
+#define XFRM_MSG_NEWSPDINFO XFRM_MSG_NEWSPDINFO
+	XFRM_MSG_GETSPDINFO,
+#define XFRM_MSG_GETSPDINFO XFRM_MSG_GETSPDINFO
+
+	XFRM_MSG_MAPPING,
+#define XFRM_MSG_MAPPING XFRM_MSG_MAPPING
+	__XFRM_MSG_MAX
+};
+#define XFRM_MSG_MAX (__XFRM_MSG_MAX - 1)
+
+#define XFRM_NR_MSGTYPES (XFRM_MSG_MAX + 1 - XFRM_MSG_BASE)
+
+/*
+ * Generic LSM security context for comunicating to user space
+ * NOTE: Same format as sadb_x_sec_ctx
+ */
+struct xfrm_user_sec_ctx {
+	__u16			len;
+	__u16			exttype;
+	__u8			ctx_alg;  /* LSMs: e.g., selinux == 1 */
+	__u8			ctx_doi;
+	__u16			ctx_len;
+};
+
+struct xfrm_user_tmpl {
+	struct xfrm_id		id;
+	__u16			family;
+	xfrm_address_t		saddr;
+	__u32			reqid;
+	__u8			mode;
+	__u8			share;
+	__u8			optional;
+	__u32			aalgos;
+	__u32			ealgos;
+	__u32			calgos;
+};
+
+struct xfrm_encap_tmpl {
+	__u16		encap_type;
+	__be16		encap_sport;
+	__be16		encap_dport;
+	xfrm_address_t	encap_oa;
+};
+
+/* AEVENT flags  */
+enum xfrm_ae_ftype_t {
+	XFRM_AE_UNSPEC,
+	XFRM_AE_RTHR=1,	/* replay threshold*/
+	XFRM_AE_RVAL=2, /* replay value */
+	XFRM_AE_LVAL=4, /* lifetime value */
+	XFRM_AE_ETHR=8, /* expiry timer threshold */
+	XFRM_AE_CR=16, /* Event cause is replay update */
+	XFRM_AE_CE=32, /* Event cause is timer expiry */
+	XFRM_AE_CU=64, /* Event cause is policy update */
+	__XFRM_AE_MAX
+
+#define XFRM_AE_MAX (__XFRM_AE_MAX - 1)
+};
+
+struct xfrm_userpolicy_type {
+	__u8		type;
+	__u16		reserved1;
+	__u8		reserved2;
+};
+
+/* Netlink message attributes.  */
+enum xfrm_attr_type_t {
+	XFRMA_UNSPEC,
+	XFRMA_ALG_AUTH,		/* struct xfrm_algo */
+	XFRMA_ALG_CRYPT,	/* struct xfrm_algo */
+	XFRMA_ALG_COMP,		/* struct xfrm_algo */
+	XFRMA_ENCAP,		/* struct xfrm_algo + struct xfrm_encap_tmpl */
+	XFRMA_TMPL,		/* 1 or more struct xfrm_user_tmpl */
+	XFRMA_SA,		/* struct xfrm_usersa_info  */
+	XFRMA_POLICY,		/*struct xfrm_userpolicy_info */
+	XFRMA_SEC_CTX,		/* struct xfrm_sec_ctx */
+	XFRMA_LTIME_VAL,
+	XFRMA_REPLAY_VAL,
+	XFRMA_REPLAY_THRESH,
+	XFRMA_ETIMER_THRESH,
+	XFRMA_SRCADDR,		/* xfrm_address_t */
+	XFRMA_COADDR,		/* xfrm_address_t */
+	XFRMA_LASTUSED,		/* unsigned long  */
+	XFRMA_POLICY_TYPE,	/* struct xfrm_userpolicy_type */
+	XFRMA_MIGRATE,
+	XFRMA_ALG_AEAD,		/* struct xfrm_algo_aead */
+	XFRMA_KMADDRESS,        /* struct xfrm_user_kmaddress */
+	XFRMA_ALG_AUTH_TRUNC,	/* struct xfrm_algo_auth */
+	XFRMA_MARK,		/* struct xfrm_mark */
+	XFRMA_TFCPAD,		/* __u32 */
+	XFRMA_REPLAY_ESN_VAL,	/* struct xfrm_replay_esn */
+	__XFRMA_MAX
+
+#define XFRMA_MAX (__XFRMA_MAX - 1)
+};
+
+struct xfrm_mark {
+	__u32           v; /* value */
+	__u32           m; /* mask */
+};
+
+enum xfrm_sadattr_type_t {
+	XFRMA_SAD_UNSPEC,
+	XFRMA_SAD_CNT,
+	XFRMA_SAD_HINFO,
+	__XFRMA_SAD_MAX
+
+#define XFRMA_SAD_MAX (__XFRMA_SAD_MAX - 1)
+};
+
+struct xfrmu_sadhinfo {
+	__u32 sadhcnt; /* current hash bkts */
+	__u32 sadhmcnt; /* max allowed hash bkts */
+};
+
+enum xfrm_spdattr_type_t {
+	XFRMA_SPD_UNSPEC,
+	XFRMA_SPD_INFO,
+	XFRMA_SPD_HINFO,
+	__XFRMA_SPD_MAX
+
+#define XFRMA_SPD_MAX (__XFRMA_SPD_MAX - 1)
+};
+
+struct xfrmu_spdinfo {
+	__u32 incnt;
+	__u32 outcnt;
+	__u32 fwdcnt;
+	__u32 inscnt;
+	__u32 outscnt;
+	__u32 fwdscnt;
+};
+
+struct xfrmu_spdhinfo {
+	__u32 spdhcnt;
+	__u32 spdhmcnt;
+};
+
+struct xfrm_usersa_info {
+	struct xfrm_selector		sel;
+	struct xfrm_id			id;
+	xfrm_address_t			saddr;
+	struct xfrm_lifetime_cfg	lft;
+	struct xfrm_lifetime_cur	curlft;
+	struct xfrm_stats		stats;
+	__u32				seq;
+	__u32				reqid;
+	__u16				family;
+	__u8				mode;		/* XFRM_MODE_xxx */
+	__u8				replay_window;
+	__u8				flags;
+#define XFRM_STATE_NOECN	1
+#define XFRM_STATE_DECAP_DSCP	2
+#define XFRM_STATE_NOPMTUDISC	4
+#define XFRM_STATE_WILDRECV	8
+#define XFRM_STATE_ICMP		16
+#define XFRM_STATE_AF_UNSPEC	32
+#define XFRM_STATE_ALIGN4	64
+#define XFRM_STATE_ESN		128
+};
+
+struct xfrm_usersa_id {
+	xfrm_address_t			daddr;
+	__be32				spi;
+	__u16				family;
+	__u8				proto;
+};
+
+struct xfrm_aevent_id {
+	struct xfrm_usersa_id		sa_id;
+	xfrm_address_t			saddr;
+	__u32				flags;
+	__u32				reqid;
+};
+
+struct xfrm_userspi_info {
+	struct xfrm_usersa_info		info;
+	__u32				min;
+	__u32				max;
+};
+
+struct xfrm_userpolicy_info {
+	struct xfrm_selector		sel;
+	struct xfrm_lifetime_cfg	lft;
+	struct xfrm_lifetime_cur	curlft;
+	__u32				priority;
+	__u32				index;
+	__u8				dir;
+	__u8				action;
+#define XFRM_POLICY_ALLOW	0
+#define XFRM_POLICY_BLOCK	1
+	__u8				flags;
+#define XFRM_POLICY_LOCALOK	1	/* Allow user to override global policy */
+	/* Automatically expand selector to include matching ICMP payloads. */
+#define XFRM_POLICY_ICMP	2
+	__u8				share;
+};
+
+struct xfrm_userpolicy_id {
+	struct xfrm_selector		sel;
+	__u32				index;
+	__u8				dir;
+};
+
+struct xfrm_user_acquire {
+	struct xfrm_id			id;
+	xfrm_address_t			saddr;
+	struct xfrm_selector		sel;
+	struct xfrm_userpolicy_info	policy;
+	__u32				aalgos;
+	__u32				ealgos;
+	__u32				calgos;
+	__u32				seq;
+};
+
+struct xfrm_user_expire {
+	struct xfrm_usersa_info		state;
+	__u8				hard;
+};
+
+struct xfrm_user_polexpire {
+	struct xfrm_userpolicy_info	pol;
+	__u8				hard;
+};
+
+struct xfrm_usersa_flush {
+	__u8				proto;
+};
+
+struct xfrm_user_report {
+	__u8				proto;
+	struct xfrm_selector		sel;
+};
+
+/* Used by MIGRATE to pass addresses IKE should use to perform
+ * SA negotiation with the peer */
+struct xfrm_user_kmaddress {
+	xfrm_address_t                  local;
+	xfrm_address_t                  remote;
+	__u32				reserved;
+	__u16				family;
+};
+
+struct xfrm_user_migrate {
+	xfrm_address_t			old_daddr;
+	xfrm_address_t			old_saddr;
+	xfrm_address_t			new_daddr;
+	xfrm_address_t			new_saddr;
+	__u8				proto;
+	__u8				mode;
+	__u16				reserved;
+	__u32				reqid;
+	__u16				old_family;
+	__u16				new_family;
+};
+
+struct xfrm_user_mapping {
+	struct xfrm_usersa_id		id;
+	__u32				reqid;
+	xfrm_address_t			old_saddr;
+	xfrm_address_t			new_saddr;
+	__be16				old_sport;
+	__be16				new_sport;
+};
+
+#ifndef __KERNEL__
+/* backwards compatibility for userspace */
+#define XFRMGRP_ACQUIRE		1
+#define XFRMGRP_EXPIRE		2
+#define XFRMGRP_SA		4
+#define XFRMGRP_POLICY		8
+#define XFRMGRP_REPORT		0x20
+#endif
+
+enum xfrm_nlgroups {
+	XFRMNLGRP_NONE,
+#define XFRMNLGRP_NONE		XFRMNLGRP_NONE
+	XFRMNLGRP_ACQUIRE,
+#define XFRMNLGRP_ACQUIRE	XFRMNLGRP_ACQUIRE
+	XFRMNLGRP_EXPIRE,
+#define XFRMNLGRP_EXPIRE	XFRMNLGRP_EXPIRE
+	XFRMNLGRP_SA,
+#define XFRMNLGRP_SA		XFRMNLGRP_SA
+	XFRMNLGRP_POLICY,
+#define XFRMNLGRP_POLICY	XFRMNLGRP_POLICY
+	XFRMNLGRP_AEVENTS,
+#define XFRMNLGRP_AEVENTS	XFRMNLGRP_AEVENTS
+	XFRMNLGRP_REPORT,
+#define XFRMNLGRP_REPORT	XFRMNLGRP_REPORT
+	XFRMNLGRP_MIGRATE,
+#define XFRMNLGRP_MIGRATE	XFRMNLGRP_MIGRATE
+	XFRMNLGRP_MAPPING,
+#define XFRMNLGRP_MAPPING	XFRMNLGRP_MAPPING
+	__XFRMNLGRP_MAX
+};
+#define XFRMNLGRP_MAX	(__XFRMNLGRP_MAX - 1)
+
+#endif /* _LINUX_XFRM_H */