summaryrefslogtreecommitdiffstats
path: root/include
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2009-06-14 13:42:43 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2009-06-14 13:42:43 -0700
commit2cf4d4514d5b43c1f3b64bd0ec8b9853bde8f1dc (patch)
treee35a625496acc6ac852846d40b8851186b9d1ac4 /include
parent44b7532b8b464f606053562400719c9c21276037 (diff)
parentce53895a5d24e0ee19fb92f56c17323fb4c9ab27 (diff)
Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits) MAINTAINERS: EB110ATX is not ebsa110 MAINTAINERS: update Eric Miao's email address and status fb: add support of LCD display controller on pxa168/910 (base layer) [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines [ARM] 5544/1: Trust PrimeCell resource sizes [ARM] pxa/sharpsl_pm: cleanup of gpio-related code. [ARM] pxa/sharpsl_pm: drop set_irq_type calls [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific [ARM] sa1100: remove unused collie_pm.c [ARM] pxa: fix the conflicting non-static declarations of global_gpios[] [ARM] 5550/1: Add default configure file for w90p910 platform [ARM] 5549/1: Add clock api for w90p910 platform. [ARM] 5548/1: Add gpio api for w90p910 platform [ARM] 5551/1: Add multi-function pin api for w90p910 platform. [ARM] Make ARM_VIC_NR depend on ARM_VIC [ARM] 5546/1: ARM PL022 SSP/SPI driver v3 ARM: OMAP4: SMP: Update defconfig for OMAP4430 ARM: OMAP4: SMP: Enable SMP support for OMAP4430 ...
Diffstat (limited to 'include')
-rw-r--r--include/linux/amba/pl022.h264
-rw-r--r--include/linux/amba/serial.h3
-rw-r--r--include/linux/clk.h13
-rw-r--r--include/video/pxa168fb.h127
4 files changed, 407 insertions, 0 deletions
diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h
new file mode 100644
index 00000000000..dcad0ffd175
--- /dev/null
+++ b/include/linux/amba/pl022.h
@@ -0,0 +1,264 @@
+/*
+ * include/linux/amba/pl022.h
+ *
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * Copyright (C) 2006 STMicroelectronics Pvt. Ltd.
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ * Initial version inspired by:
+ * linux-2.6.17-rc3-mm1/drivers/spi/pxa2xx_spi.c
+ * Initial adoption to PL022 by:
+ * Sachin Verma <sachin.verma@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _SSP_PL022_H
+#define _SSP_PL022_H
+
+#include <linux/device.h>
+
+/**
+ * whether SSP is in loopback mode or not
+ */
+enum ssp_loopback {
+ LOOPBACK_DISABLED,
+ LOOPBACK_ENABLED
+};
+
+/**
+ * enum ssp_interface - interfaces allowed for this SSP Controller
+ * @SSP_INTERFACE_MOTOROLA_SPI: Motorola Interface
+ * @SSP_INTERFACE_TI_SYNC_SERIAL: Texas Instrument Synchronous Serial
+ * interface
+ * @SSP_INTERFACE_NATIONAL_MICROWIRE: National Semiconductor Microwire
+ * interface
+ * @SSP_INTERFACE_UNIDIRECTIONAL: Unidirectional interface (STn8810
+ * &STn8815 only)
+ */
+enum ssp_interface {
+ SSP_INTERFACE_MOTOROLA_SPI,
+ SSP_INTERFACE_TI_SYNC_SERIAL,
+ SSP_INTERFACE_NATIONAL_MICROWIRE,
+ SSP_INTERFACE_UNIDIRECTIONAL
+};
+
+/**
+ * enum ssp_hierarchy - whether SSP is configured as Master or Slave
+ */
+enum ssp_hierarchy {
+ SSP_MASTER,
+ SSP_SLAVE
+};
+
+/**
+ * enum ssp_clock_params - clock parameters, to set SSP clock at a
+ * desired freq
+ */
+struct ssp_clock_params {
+ u8 cpsdvsr; /* value from 2 to 254 (even only!) */
+ u8 scr; /* value from 0 to 255 */
+};
+
+/**
+ * enum ssp_rx_endian - endianess of Rx FIFO Data
+ */
+enum ssp_rx_endian {
+ SSP_RX_MSB,
+ SSP_RX_LSB
+};
+
+/**
+ * enum ssp_tx_endian - endianess of Tx FIFO Data
+ */
+enum ssp_tx_endian {
+ SSP_TX_MSB,
+ SSP_TX_LSB
+};
+
+/**
+ * enum ssp_data_size - number of bits in one data element
+ */
+enum ssp_data_size {
+ SSP_DATA_BITS_4 = 0x03, SSP_DATA_BITS_5, SSP_DATA_BITS_6,
+ SSP_DATA_BITS_7, SSP_DATA_BITS_8, SSP_DATA_BITS_9,
+ SSP_DATA_BITS_10, SSP_DATA_BITS_11, SSP_DATA_BITS_12,
+ SSP_DATA_BITS_13, SSP_DATA_BITS_14, SSP_DATA_BITS_15,
+ SSP_DATA_BITS_16, SSP_DATA_BITS_17, SSP_DATA_BITS_18,
+ SSP_DATA_BITS_19, SSP_DATA_BITS_20, SSP_DATA_BITS_21,
+ SSP_DATA_BITS_22, SSP_DATA_BITS_23, SSP_DATA_BITS_24,
+ SSP_DATA_BITS_25, SSP_DATA_BITS_26, SSP_DATA_BITS_27,
+ SSP_DATA_BITS_28, SSP_DATA_BITS_29, SSP_DATA_BITS_30,
+ SSP_DATA_BITS_31, SSP_DATA_BITS_32
+};
+
+/**
+ * enum ssp_mode - SSP mode of operation (Communication modes)
+ */
+enum ssp_mode {
+ INTERRUPT_TRANSFER,
+ POLLING_TRANSFER,
+ DMA_TRANSFER
+};
+
+/**
+ * enum ssp_rx_level_trig - receive FIFO watermark level which triggers
+ * IT: Interrupt fires when _N_ or more elements in RX FIFO.
+ */
+enum ssp_rx_level_trig {
+ SSP_RX_1_OR_MORE_ELEM,
+ SSP_RX_4_OR_MORE_ELEM,
+ SSP_RX_8_OR_MORE_ELEM,
+ SSP_RX_16_OR_MORE_ELEM,
+ SSP_RX_32_OR_MORE_ELEM
+};
+
+/**
+ * Transmit FIFO watermark level which triggers (IT Interrupt fires
+ * when _N_ or more empty locations in TX FIFO)
+ */
+enum ssp_tx_level_trig {
+ SSP_TX_1_OR_MORE_EMPTY_LOC,
+ SSP_TX_4_OR_MORE_EMPTY_LOC,
+ SSP_TX_8_OR_MORE_EMPTY_LOC,
+ SSP_TX_16_OR_MORE_EMPTY_LOC,
+ SSP_TX_32_OR_MORE_EMPTY_LOC
+};
+
+/**
+ * enum SPI Clock Phase - clock phase (Motorola SPI interface only)
+ * @SSP_CLK_RISING_EDGE: Receive data on rising edge
+ * @SSP_CLK_FALLING_EDGE: Receive data on falling edge
+ */
+enum ssp_spi_clk_phase {
+ SSP_CLK_RISING_EDGE,
+ SSP_CLK_FALLING_EDGE
+};
+
+/**
+ * enum SPI Clock Polarity - clock polarity (Motorola SPI interface only)
+ * @SSP_CLK_POL_IDLE_LOW: Low inactive level
+ * @SSP_CLK_POL_IDLE_HIGH: High inactive level
+ */
+enum ssp_spi_clk_pol {
+ SSP_CLK_POL_IDLE_LOW,
+ SSP_CLK_POL_IDLE_HIGH
+};
+
+/**
+ * Microwire Conrol Lengths Command size in microwire format
+ */
+enum ssp_microwire_ctrl_len {
+ SSP_BITS_4 = 0x03, SSP_BITS_5, SSP_BITS_6,
+ SSP_BITS_7, SSP_BITS_8, SSP_BITS_9,
+ SSP_BITS_10, SSP_BITS_11, SSP_BITS_12,
+ SSP_BITS_13, SSP_BITS_14, SSP_BITS_15,
+ SSP_BITS_16, SSP_BITS_17, SSP_BITS_18,
+ SSP_BITS_19, SSP_BITS_20, SSP_BITS_21,
+ SSP_BITS_22, SSP_BITS_23, SSP_BITS_24,
+ SSP_BITS_25, SSP_BITS_26, SSP_BITS_27,
+ SSP_BITS_28, SSP_BITS_29, SSP_BITS_30,
+ SSP_BITS_31, SSP_BITS_32
+};
+
+/**
+ * enum Microwire Wait State
+ * @SSP_MWIRE_WAIT_ZERO: No wait state inserted after last command bit
+ * @SSP_MWIRE_WAIT_ONE: One wait state inserted after last command bit
+ */
+enum ssp_microwire_wait_state {
+ SSP_MWIRE_WAIT_ZERO,
+ SSP_MWIRE_WAIT_ONE
+};
+
+/**
+ * enum Microwire - whether Full/Half Duplex
+ * @SSP_MICROWIRE_CHANNEL_FULL_DUPLEX: SSPTXD becomes bi-directional,
+ * SSPRXD not used
+ * @SSP_MICROWIRE_CHANNEL_HALF_DUPLEX: SSPTXD is an output, SSPRXD is
+ * an input.
+ */
+enum ssp_duplex {
+ SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
+ SSP_MICROWIRE_CHANNEL_HALF_DUPLEX
+};
+
+/**
+ * CHIP select/deselect commands
+ */
+enum ssp_chip_select {
+ SSP_CHIP_SELECT,
+ SSP_CHIP_DESELECT
+};
+
+
+/**
+ * struct pl022_ssp_master - device.platform_data for SPI controller devices.
+ * @num_chipselect: chipselects are used to distinguish individual
+ * SPI slaves, and are numbered from zero to num_chipselects - 1.
+ * each slave has a chipselect signal, but it's common that not
+ * every chipselect is connected to a slave.
+ * @enable_dma: if true enables DMA driven transfers.
+ */
+struct pl022_ssp_controller {
+ u16 bus_id;
+ u8 num_chipselect;
+ u8 enable_dma:1;
+};
+
+/**
+ * struct ssp_config_chip - spi_board_info.controller_data for SPI
+ * slave devices, copied to spi_device.controller_data.
+ *
+ * @lbm: used for test purpose to internally connect RX and TX
+ * @iface: Interface type(Motorola, TI, Microwire, Universal)
+ * @hierarchy: sets whether interface is master or slave
+ * @slave_tx_disable: SSPTXD is disconnected (in slave mode only)
+ * @clk_freq: Tune freq parameters of SSP(when in master mode)
+ * @endian_rx: Endianess of Data in Rx FIFO
+ * @endian_tx: Endianess of Data in Tx FIFO
+ * @data_size: Width of data element(4 to 32 bits)
+ * @com_mode: communication mode: polling, Interrupt or DMA
+ * @rx_lev_trig: Rx FIFO watermark level (for IT & DMA mode)
+ * @tx_lev_trig: Tx FIFO watermark level (for IT & DMA mode)
+ * @clk_phase: Motorola SPI interface Clock phase
+ * @clk_pol: Motorola SPI interface Clock polarity
+ * @ctrl_len: Microwire interface: Control length
+ * @wait_state: Microwire interface: Wait state
+ * @duplex: Microwire interface: Full/Half duplex
+ * @cs_control: function pointer to board-specific function to
+ * assert/deassert I/O port to control HW generation of devices chip-select.
+ * @dma_xfer_type: Type of DMA xfer (Mem-to-periph or Periph-to-Periph)
+ * @dma_config: DMA configuration for SSP controller and peripheral
+ */
+struct pl022_config_chip {
+ struct device *dev;
+ enum ssp_loopback lbm;
+ enum ssp_interface iface;
+ enum ssp_hierarchy hierarchy;
+ bool slave_tx_disable;
+ struct ssp_clock_params clk_freq;
+ enum ssp_rx_endian endian_rx;
+ enum ssp_tx_endian endian_tx;
+ enum ssp_data_size data_size;
+ enum ssp_mode com_mode;
+ enum ssp_rx_level_trig rx_lev_trig;
+ enum ssp_tx_level_trig tx_lev_trig;
+ enum ssp_spi_clk_phase clk_phase;
+ enum ssp_spi_clk_pol clk_pol;
+ enum ssp_microwire_ctrl_len ctrl_len;
+ enum ssp_microwire_wait_state wait_state;
+ enum ssp_duplex duplex;
+ void (*cs_control) (u32 control);
+};
+
+#endif /* _SSP_PL022_H */
diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h
index 64a982ea5d5..5a5a7fd6249 100644
--- a/include/linux/amba/serial.h
+++ b/include/linux/amba/serial.h
@@ -114,6 +114,9 @@
#define UART011_IFLS_TX4_8 (2 << 0)
#define UART011_IFLS_TX6_8 (3 << 0)
#define UART011_IFLS_TX7_8 (4 << 0)
+/* special values for ST vendor with deeper fifo */
+#define UART011_IFLS_RX_HALF (5 << 3)
+#define UART011_IFLS_TX_HALF (5 << 0)
#define UART011_OEIM (1 << 10) /* overrun error interrupt mask */
#define UART011_BEIM (1 << 9) /* break error interrupt mask */
diff --git a/include/linux/clk.h b/include/linux/clk.h
index 1db9bbf444a..1d37f42ac29 100644
--- a/include/linux/clk.h
+++ b/include/linux/clk.h
@@ -142,4 +142,17 @@ struct clk *clk_get_parent(struct clk *clk);
*/
struct clk *clk_get_sys(const char *dev_id, const char *con_id);
+/**
+ * clk_add_alias - add a new clock alias
+ * @alias: name for clock alias
+ * @alias_dev_name: device name
+ * @id: platform specific clock name
+ * @dev: device
+ *
+ * Allows using generic clock names for drivers by adding a new alias.
+ * Assumes clkdev, see clkdev.h for more info.
+ */
+int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
+ struct device *dev);
+
#endif
diff --git a/include/video/pxa168fb.h b/include/video/pxa168fb.h
new file mode 100644
index 00000000000..b5cc72fe046
--- /dev/null
+++ b/include/video/pxa168fb.h
@@ -0,0 +1,127 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/pxa168fb.h
+ *
+ * Copyright (C) 2009 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_PXA168FB_H
+#define __ASM_MACH_PXA168FB_H
+
+#include <linux/fb.h>
+#include <linux/interrupt.h>
+
+/* Dumb interface */
+#define PIN_MODE_DUMB_24 0
+#define PIN_MODE_DUMB_18_SPI 1
+#define PIN_MODE_DUMB_18_GPIO 2
+#define PIN_MODE_DUMB_16_SPI 3
+#define PIN_MODE_DUMB_16_GPIO 4
+#define PIN_MODE_DUMB_12_SPI_GPIO 5
+#define PIN_MODE_SMART_18_SPI 6
+#define PIN_MODE_SMART_16_SPI 7
+#define PIN_MODE_SMART_8_SPI_GPIO 8
+
+/* Dumb interface pin allocation */
+#define DUMB_MODE_RGB565 0
+#define DUMB_MODE_RGB565_UPPER 1
+#define DUMB_MODE_RGB666 2
+#define DUMB_MODE_RGB666_UPPER 3
+#define DUMB_MODE_RGB444 4
+#define DUMB_MODE_RGB444_UPPER 5
+#define DUMB_MODE_RGB888 6
+
+/* default fb buffer size WVGA-32bits */
+#define DEFAULT_FB_SIZE (800 * 480 * 4)
+
+/*
+ * Buffer pixel format
+ * bit0 is for rb swap.
+ * bit12 is for Y UorV swap
+ */
+#define PIX_FMT_RGB565 0
+#define PIX_FMT_BGR565 1
+#define PIX_FMT_RGB1555 2
+#define PIX_FMT_BGR1555 3
+#define PIX_FMT_RGB888PACK 4
+#define PIX_FMT_BGR888PACK 5
+#define PIX_FMT_RGB888UNPACK 6
+#define PIX_FMT_BGR888UNPACK 7
+#define PIX_FMT_RGBA888 8
+#define PIX_FMT_BGRA888 9
+#define PIX_FMT_YUV422PACK 10
+#define PIX_FMT_YVU422PACK 11
+#define PIX_FMT_YUV422PLANAR 12
+#define PIX_FMT_YVU422PLANAR 13
+#define PIX_FMT_YUV420PLANAR 14
+#define PIX_FMT_YVU420PLANAR 15
+#define PIX_FMT_PSEUDOCOLOR 20
+#define PIX_FMT_UYVY422PACK (0x1000|PIX_FMT_YUV422PACK)
+
+/*
+ * PXA LCD controller private state.
+ */
+struct pxa168fb_info {
+ struct device *dev;
+ struct clk *clk;
+ struct fb_info *info;
+
+ void __iomem *reg_base;
+ dma_addr_t fb_start_dma;
+ u32 pseudo_palette[16];
+
+ int pix_fmt;
+ unsigned is_blanked:1;
+ unsigned panel_rbswap:1;
+ unsigned active:1;
+};
+
+/*
+ * PXA fb machine information
+ */
+struct pxa168fb_mach_info {
+ char id[16];
+
+ int num_modes;
+ struct fb_videomode *modes;
+
+ /*
+ * Pix_fmt
+ */
+ unsigned pix_fmt;
+
+ /*
+ * I/O pin allocation.
+ */
+ unsigned io_pin_allocation_mode:4;
+
+ /*
+ * Dumb panel -- assignment of R/G/B component info to the 24
+ * available external data lanes.
+ */
+ unsigned dumb_mode:4;
+ unsigned panel_rgb_reverse_lanes:1;
+
+ /*
+ * Dumb panel -- GPIO output data.
+ */
+ unsigned gpio_output_mask:8;
+ unsigned gpio_output_data:8;
+
+ /*
+ * Dumb panel -- configurable output signal polarity.
+ */
+ unsigned invert_composite_blank:1;
+ unsigned invert_pix_val_ena:1;
+ unsigned invert_pixclock:1;
+ unsigned invert_vsync:1;
+ unsigned invert_hsync:1;
+ unsigned panel_rbswap:1;
+ unsigned active:1;
+ unsigned enable_lcd:1;
+};
+
+#endif /* __ASM_MACH_PXA168FB_H */