Merge tag 'driver-core-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core merge from Greg Kroah-Hartman:
 "Here is the big driver core update for 3.7-rc1.

  A number of firmware_class.c updates (as you saw a month or so ago),
  and some hyper-v updates and some printk fixes as well.  All patches
  that are outside of the drivers/base area have been acked by the
  respective maintainers, and have all been in the linux-next tree for a
  while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'driver-core-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
  memory: tegra{20,30}-mc: Fix reading incorrect register in mc_readl()
  device.h: Add missing inline to #ifndef CONFIG_PRINTK dev_vprintk_emit
  memory: emif: Add ifdef CONFIG_DEBUG_FS guard for emif_debugfs_[init|exit]
  Documentation: Fixes some translation error in Documentation/zh_CN/gpio.txt
  Documentation: Remove 3 byte redundant code at the head of the Documentation/zh_CN/arm/booting
  Documentation: Chinese translation of Documentation/video4linux/omap3isp.txt
  device and dynamic_debug: Use dev_vprintk_emit and dev_printk_emit
  dev: Add dev_vprintk_emit and dev_printk_emit
  netdev_printk/netif_printk: Remove a superfluous logging colon
  netdev_printk/dynamic_netdev_dbg: Directly call printk_emit
  dev_dbg/dynamic_debug: Update to use printk_emit, optimize stack
  driver-core: Shut up dev_dbg_reatelimited() without DEBUG
  tools/hv: Parse /etc/os-release
  tools/hv: Check for read/write errors
  tools/hv: Fix exit() error code
  tools/hv: Fix file handle leak
  Tools: hv: Implement the KVP verb - KVP_OP_GET_IP_INFO
  Tools: hv: Rename the function kvp_get_ip_address()
  Tools: hv: Implement the KVP verb - KVP_OP_SET_IP_INFO
  Tools: hv: Add an example script to configure an interface
  ...

8 files changed, 251 insertions, 51 deletions

diff --git a/include/linux/device.h b/include/linux/device.h
index 52a5f15a222..af92883bb4a 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -536,6 +536,10 @@ extern void *__devres_alloc(dr_release_t release, size_t size, gfp_t gfp,
 #else
 extern void *devres_alloc(dr_release_t release, size_t size, gfp_t gfp);
 #endif
+extern void devres_for_each_res(struct device *dev, dr_release_t release,
+				dr_match_t match, void *match_data,
+				void (*fn)(struct device *, void *, void *),
+				void *data);
 extern void devres_free(void *res);
 extern void devres_add(struct device *dev, void *res);
 extern void *devres_find(struct device *dev, dr_release_t release,
@@ -891,12 +895,15 @@ extern const char *dev_driver_string(const struct device *dev);
 
 #ifdef CONFIG_PRINTK
 
-extern int __dev_printk(const char *level, const struct device *dev,
-			struct va_format *vaf);
+extern __printf(3, 0)
+int dev_vprintk_emit(int level, const struct device *dev,
+		     const char *fmt, va_list args);
+extern __printf(3, 4)
+int dev_printk_emit(int level, const struct device *dev, const char *fmt, ...);
+
 extern __printf(3, 4)
 int dev_printk(const char *level, const struct device *dev,
-	       const char *fmt, ...)
-	;
+	       const char *fmt, ...);
 extern __printf(2, 3)
 int dev_emerg(const struct device *dev, const char *fmt, ...);
 extern __printf(2, 3)
@@ -914,6 +921,14 @@ int _dev_info(const struct device *dev, const char *fmt, ...);
 
 #else
 
+static inline __printf(3, 0)
+int dev_vprintk_emit(int level, const struct device *dev,
+		     const char *fmt, va_list args)
+{ return 0; }
+static inline __printf(3, 4)
+int dev_printk_emit(int level, const struct device *dev, const char *fmt, ...)
+{ return 0; }
+
 static inline int __dev_printk(const char *level, const struct device *dev,
 			       struct va_format *vaf)
 { return 0; }
@@ -946,6 +961,32 @@ int _dev_info(const struct device *dev, const char *fmt, ...)
 
 #endif
 
+/*
+ * Stupid hackaround for existing uses of non-printk uses dev_info
+ *
+ * Note that the definition of dev_info below is actually _dev_info
+ * and a macro is used to avoid redefining dev_info
+ */
+
+#define dev_info(dev, fmt, arg...) _dev_info(dev, fmt, ##arg)
+
+#if defined(CONFIG_DYNAMIC_DEBUG)
+#define dev_dbg(dev, format, ...)		     \
+do {						     \
+	dynamic_dev_dbg(dev, format, ##__VA_ARGS__); \
+} while (0)
+#elif defined(DEBUG)
+#define dev_dbg(dev, format, arg...)		\
+	dev_printk(KERN_DEBUG, dev, format, ##arg)
+#else
+#define dev_dbg(dev, format, arg...)				\
+({								\
+	if (0)							\
+		dev_printk(KERN_DEBUG, dev, format, ##arg);	\
+	0;							\
+})
+#endif
+
 #define dev_level_ratelimited(dev_level, dev, fmt, ...)			\
 do {									\
 	static DEFINE_RATELIMIT_STATE(_rs,				\
@@ -969,33 +1010,21 @@ do {									\
 	dev_level_ratelimited(dev_notice, dev, fmt, ##__VA_ARGS__)
 #define dev_info_ratelimited(dev, fmt, ...)				\
 	dev_level_ratelimited(dev_info, dev, fmt, ##__VA_ARGS__)
+#if defined(CONFIG_DYNAMIC_DEBUG) || defined(DEBUG)
 #define dev_dbg_ratelimited(dev, fmt, ...)				\
-	dev_level_ratelimited(dev_dbg, dev, fmt, ##__VA_ARGS__)
-
-/*
- * Stupid hackaround for existing uses of non-printk uses dev_info
- *
- * Note that the definition of dev_info below is actually _dev_info
- * and a macro is used to avoid redefining dev_info
- */
-
-#define dev_info(dev, fmt, arg...) _dev_info(dev, fmt, ##arg)
-
-#if defined(CONFIG_DYNAMIC_DEBUG)
-#define dev_dbg(dev, format, ...)		     \
-do {						     \
-	dynamic_dev_dbg(dev, format, ##__VA_ARGS__); \
+do {									\
+	static DEFINE_RATELIMIT_STATE(_rs,				\
+				      DEFAULT_RATELIMIT_INTERVAL,	\
+				      DEFAULT_RATELIMIT_BURST);		\
+	DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt);			\
+	if (unlikely(descriptor.flags & _DPRINTK_FLAGS_PRINT) &&	\
+	    __ratelimit(&_rs))						\
+		__dynamic_pr_debug(&descriptor, pr_fmt(fmt),		\
+				   ##__VA_ARGS__);			\
 } while (0)
-#elif defined(DEBUG)
-#define dev_dbg(dev, format, arg...)		\
-	dev_printk(KERN_DEBUG, dev, format, ##arg)
 #else
-#define dev_dbg(dev, format, arg...)				\
-({								\
-	if (0)							\
-		dev_printk(KERN_DEBUG, dev, format, ##arg);	\
-	0;							\
-})
+#define dev_dbg_ratelimited(dev, fmt, ...)			\
+	no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
 #endif
 
 #ifdef VERBOSE_DEBUG
diff --git a/include/linux/extcon.h b/include/linux/extcon.h
index cdd40147765..7443a560c9d 100644
--- a/include/linux/extcon.h
+++ b/include/linux/extcon.h
@@ -30,19 +30,19 @@
 
 /*
  * The standard cable name is to help support general notifier
- * and notifee device drivers to share the common names.
+ * and notifiee device drivers to share the common names.
  * Please use standard cable names unless your notifier device has
  * a very unique and abnormal cable or
  * the cable type is supposed to be used with only one unique
- * pair of notifier/notifee devices.
+ * pair of notifier/notifiee devices.
  *
  * Please add any other "standard" cables used with extcon dev.
  *
  * You may add a dot and number to specify version or specification
  * of the specific cable if it is required. (e.g., "Fast-charger.18"
  * and "Fast-charger.10" for 1.8A and 1.0A chargers)
- * However, the notifee and notifier should be able to handle such
- * string and if the notifee can negotiate the protocol or idenify,
+ * However, the notifiee and notifier should be able to handle such
+ * string and if the notifiee can negotiate the protocol or identify,
  * you don't need such convention. This convention is helpful when
  * notifier can distinguish but notifiee cannot.
  */
@@ -76,7 +76,7 @@ struct extcon_cable;
  * struct extcon_dev - An extcon device represents one external connector.
  * @name	The name of this extcon device. Parent device name is used
  *		if NULL.
- * @supported_cable	Array of supported cable name ending with NULL.
+ * @supported_cable	Array of supported cable names ending with NULL.
  *			If supported_cable is NULL, cable name related APIs
  *			are disabled.
  * @mutually_exclusive	Array of mutually exclusive set of cables that cannot
@@ -95,7 +95,7 @@ struct extcon_cable;
  * @state	Attach/detach state of this extcon. Do not provide at
  *		register-time
  * @nh	Notifier for the state change events from this extcon
- * @entry	To support list of extcon devices so that uses can search
+ * @entry	To support list of extcon devices so that users can search
  *		for extcon devices based on the extcon name.
  * @lock
  * @max_supported	Internal value to store the number of cables.
@@ -199,7 +199,7 @@ extern int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state);
 /*
  * get/set_cable_state access each bit of the 32b encoded state value.
  * They are used to access the status of each cable based on the cable_name
- * or cable_index, which is retrived by extcon_find_cable_index
+ * or cable_index, which is retrieved by extcon_find_cable_index
  */
 extern int extcon_find_cable_index(struct extcon_dev *sdev,
 				   const char *cable_name);
@@ -226,9 +226,9 @@ extern int extcon_unregister_interest(struct extcon_specific_cable_nb *nb);
 
 /*
  * Following APIs are to monitor every action of a notifier.
- * Registerer gets notified for every external port of a connection device.
+ * Registrar gets notified for every external port of a connection device.
  * Probably this could be used to debug an action of notifier; however,
- * we do not recommend to use this at normal 'notifiee' device drivers who
+ * we do not recommend to use this for normal 'notifiee' device drivers who
  * want to be notified by a specific external port of the notifier.
  */
 extern int extcon_register_notifier(struct extcon_dev *edev,
diff --git a/include/linux/extcon/extcon-adc-jack.h b/include/linux/extcon/extcon-adc-jack.h
new file mode 100644
index 00000000000..20e9eef25d4
--- /dev/null
+++ b/include/linux/extcon/extcon-adc-jack.h
@@ -0,0 +1,71 @@
+/*
+ * include/linux/extcon/extcon-adc-jack.h
+ *
+ * Analog Jack extcon driver with ADC-based detection capability.
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ * MyungJoo Ham <myungjoo.ham@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _EXTCON_ADC_JACK_H_
+#define _EXTCON_ADC_JACK_H_ __FILE__
+
+#include <linux/module.h>
+#include <linux/extcon.h>
+
+/**
+ * struct adc_jack_cond - condition to use an extcon state
+ * @state      - the corresponding extcon state (if 0, this struct denotes
+ *             the last adc_jack_cond element among the array)
+ * @min_adc    - min adc value for this condition
+ * @max_adc    - max adc value for this condition
+ *
+ * For example, if { .state = 0x3, .min_adc = 100, .max_adc = 200}, it means
+ * that if ADC value is between (inclusive) 100 and 200, than the cable 0 and
+ * 1 are attached (1<<0 | 1<<1 == 0x3)
+ *
+ * Note that you don't need to describe condition for "no cable attached"
+ * because when no adc_jack_cond is met, state = 0 is automatically chosen.
+ */
+struct adc_jack_cond {
+	u32 state; /* extcon state value. 0 if invalid */
+	u32 min_adc;
+	u32 max_adc;
+};
+
+/**
+ * struct adc_jack_pdata - platform data for adc jack device.
+ * @name       - name of the extcon device. If null, "adc-jack" is used.
+ * @consumer_channel - Unique name to identify the channel on the consumer
+ *                   side. This typically describes the channels used within
+ *                   the consumer. E.g. 'battery_voltage'
+ * @cable_names        - array of cable names ending with null.
+ * @adc_contitions     - array of struct adc_jack_cond conditions ending
+ *                     with .state = 0 entry. This describes how to decode
+ *                     adc values into extcon state.
+ * @irq_flags  - irq flags used for the @irq
+ * @handling_delay_ms  - in some devices, we need to read ADC value some
+ *                     milli-seconds after the interrupt occurs. You may
+ *                     describe such delays with @handling_delay_ms, which
+ *                     is rounded-off by jiffies.
+ */
+struct adc_jack_pdata {
+	const char *name;
+	const char *consumer_channel;
+	/*
+	 * The last entry should be NULL
+	 */
+	const char **cable_names;
+	/* The last entry's state should be 0 */
+	struct adc_jack_cond *adc_conditions;
+
+	unsigned long irq_flags;
+	unsigned long handling_delay_ms; /* in ms */
+};
+
+#endif /* _EXTCON_ADC_JACK_H */
diff --git a/include/linux/firmware.h b/include/linux/firmware.h
index 1e7c01189fa..e4279fedb93 100644
--- a/include/linux/firmware.h
+++ b/include/linux/firmware.h
@@ -12,6 +12,9 @@ struct firmware {
 	size_t size;
 	const u8 *data;
 	struct page **pages;
+
+	/* firmware loader private fields */
+	void *priv;
 };
 
 struct module;
@@ -44,6 +47,8 @@ int request_firmware_nowait(
 	void (*cont)(const struct firmware *fw, void *context));
 
 void release_firmware(const struct firmware *fw);
+int cache_firmware(const char *name);
+int uncache_firmware(const char *name);
 #else
 static inline int request_firmware(const struct firmware **fw,
 				   const char *name,
@@ -62,6 +67,16 @@ static inline int request_firmware_nowait(
 static inline void release_firmware(const struct firmware *fw)
 {
 }
+
+static inline int cache_firmware(const char *name)
+{
+	return -ENOENT;
+}
+
+static inline int uncache_firmware(const char *name)
+{
+	return -EINVAL;
+}
 #endif
 
 #endif
diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
index 68ed7f7e1fc..e73b852156b 100644
--- a/include/linux/hyperv.h
+++ b/include/linux/hyperv.h
@@ -122,12 +122,53 @@
 #define REG_U32 4
 #define REG_U64 8
 
+/*
+ * As we look at expanding the KVP functionality to include
+ * IP injection functionality, we need to maintain binary
+ * compatibility with older daemons.
+ *
+ * The KVP opcodes are defined by the host and it was unfortunate
+ * that I chose to treat the registration operation as part of the
+ * KVP operations defined by the host.
+ * Here is the level of compatibility
+ * (between the user level daemon and the kernel KVP driver) that we
+ * will implement:
+ *
+ * An older daemon will always be supported on a newer driver.
+ * A given user level daemon will require a minimal version of the
+ * kernel driver.
+ * If we cannot handle the version differences, we will fail gracefully
+ * (this can happen when we have a user level daemon that is more
+ * advanced than the KVP driver.
+ *
+ * We will use values used in this handshake for determining if we have
+ * workable user level daemon and the kernel driver. We begin by taking the
+ * registration opcode out of the KVP opcode namespace. We will however,
+ * maintain compatibility with the existing user-level daemon code.
+ */
+
+/*
+ * Daemon code not supporting IP injection (legacy daemon).
+ */
+
+#define KVP_OP_REGISTER	4
+
+/*
+ * Daemon code supporting IP injection.
+ * The KVP opcode field is used to communicate the
+ * registration information; so define a namespace that
+ * will be distinct from the host defined KVP opcode.
+ */
+
+#define KVP_OP_REGISTER1 100
+
 enum hv_kvp_exchg_op {
 	KVP_OP_GET = 0,
 	KVP_OP_SET,
 	KVP_OP_DELETE,
 	KVP_OP_ENUMERATE,
-	KVP_OP_REGISTER,
+	KVP_OP_GET_IP_INFO,
+	KVP_OP_SET_IP_INFO,
 	KVP_OP_COUNT /* Number of operations, must be last. */
 };
 
@@ -140,6 +181,39 @@ enum hv_kvp_exchg_pool {
 	KVP_POOL_COUNT /* Number of pools, must be last. */
 };
 
+/*
+ * Some Hyper-V status codes.
+ */
+
+#define HV_S_OK				0x00000000
+#define HV_E_FAIL			0x80004005
+#define HV_S_CONT			0x80070103
+#define HV_ERROR_NOT_SUPPORTED		0x80070032
+#define HV_ERROR_MACHINE_LOCKED		0x800704F7
+#define HV_ERROR_DEVICE_NOT_CONNECTED	0x8007048F
+#define HV_INVALIDARG			0x80070057
+#define HV_GUID_NOTFOUND		0x80041002
+
+#define ADDR_FAMILY_NONE	0x00
+#define ADDR_FAMILY_IPV4	0x01
+#define ADDR_FAMILY_IPV6	0x02
+
+#define MAX_ADAPTER_ID_SIZE	128
+#define MAX_IP_ADDR_SIZE	1024
+#define MAX_GATEWAY_SIZE	512
+
+
+struct hv_kvp_ipaddr_value {
+	__u16	adapter_id[MAX_ADAPTER_ID_SIZE];
+	__u8	addr_family;
+	__u8	dhcp_enabled;
+	__u16	ip_addr[MAX_IP_ADDR_SIZE];
+	__u16	sub_net[MAX_IP_ADDR_SIZE];
+	__u16	gate_way[MAX_GATEWAY_SIZE];
+	__u16	dns_addr[MAX_IP_ADDR_SIZE];
+} __attribute__((packed));
+
+
 struct hv_kvp_hdr {
 	__u8 operation;
 	__u8 pool;
@@ -181,16 +255,26 @@ struct hv_kvp_register {
 };
 
 struct hv_kvp_msg {
-	struct hv_kvp_hdr	kvp_hdr;
+	union {
+		struct hv_kvp_hdr	kvp_hdr;
+		int error;
+	};
 	union {
 		struct hv_kvp_msg_get		kvp_get;
 		struct hv_kvp_msg_set		kvp_set;
 		struct hv_kvp_msg_delete	kvp_delete;
 		struct hv_kvp_msg_enumerate	kvp_enum_data;
+		struct hv_kvp_ipaddr_value      kvp_ip_val;
 		struct hv_kvp_register		kvp_register;
 	} body;
 } __attribute__((packed));
 
+struct hv_kvp_ip_msg {
+	__u8 operation;
+	__u8 pool;
+	struct hv_kvp_ipaddr_value      kvp_ip_val;
+} __attribute__((packed));
+
 #ifdef __KERNEL__
 #include <linux/scatterlist.h>
 #include <linux/list.h>
@@ -405,7 +489,7 @@ struct vmtransfer_page_range {
 struct vmtransfer_page_packet_header {
 	struct vmpacket_descriptor d;
 	u16 xfer_pageset_id;
-	bool sender_owns_set;
+	u8  sender_owns_set;
 	u8 reserved;
 	u32 range_cnt;
 	struct vmtransfer_page_range ranges[1];
@@ -559,7 +643,7 @@ struct vmbus_channel_query_vmbus_version {
 /* VMBus Version Supported parameters */
 struct vmbus_channel_version_supported {
 	struct vmbus_channel_message_header header;
-	bool version_supported;
+	u8 version_supported;
 } __packed;
 
 /* Offer Channel parameters */
@@ -568,7 +652,7 @@ struct vmbus_channel_offer_channel {
 	struct vmbus_channel_offer offer;
 	u32 child_relid;
 	u8 monitorid;
-	bool monitor_allocated;
+	u8 monitor_allocated;
 } __packed;
 
 /* Rescind Offer parameters */
@@ -704,7 +788,7 @@ struct vmbus_channel_initiate_contact {
 
 struct vmbus_channel_version_response {
 	struct vmbus_channel_message_header header;
-	bool version_supported;
+	u8 version_supported;
 } __packed;
 
 enum vmbus_channel_state {
@@ -977,11 +1061,6 @@ void vmbus_driver_unregister(struct hv_driver *hv_driver);
 #define ICMSGHDRFLAG_REQUEST		2
 #define ICMSGHDRFLAG_RESPONSE		4
 
-#define HV_S_OK				0x00000000
-#define HV_E_FAIL			0x80004005
-#define HV_S_CONT			0x80070103
-#define HV_ERROR_NOT_SUPPORTED		0x80070032
-#define HV_ERROR_MACHINE_LOCKED		0x800704F7
 
 /*
  * While we want to handle util services as regular devices,
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 59dc05f3824..5f49cc0a107 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -2720,9 +2720,6 @@ static inline const char *netdev_name(const struct net_device *dev)
 	return dev->name;
 }
 
-extern int __netdev_printk(const char *level, const struct net_device *dev,
-			struct va_format *vaf);
-
 extern __printf(3, 4)
 int netdev_printk(const char *level, const struct net_device *dev,
 		  const char *format, ...);
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index 60e9994ef40..5711e9525a2 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -14,11 +14,15 @@
 #include <linux/device.h>
 #include <linux/mod_devicetable.h>
 
+#define PLATFORM_DEVID_NONE	(-1)
+#define PLATFORM_DEVID_AUTO	(-2)
+
 struct mfd_cell;
 
 struct platform_device {
 	const char	* name;
 	int		id;
+	bool		id_auto;
 	struct device	dev;
 	u32		num_resources;
 	struct resource	* resource;
diff --git a/include/linux/pm.h b/include/linux/pm.h
index f067e60a383..88f034a23f2 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -638,6 +638,7 @@ extern void __suspend_report_result(const char *function, void *fn, int ret);
 	} while (0)
 
 extern int device_pm_wait_for_dev(struct device *sub, struct device *dev);
+extern void dpm_for_each_dev(void *data, void (*fn)(struct device *, void *));
 
 extern int pm_generic_prepare(struct device *dev);
 extern int pm_generic_suspend_late(struct device *dev);
@@ -677,6 +678,10 @@ static inline int device_pm_wait_for_dev(struct device *a, struct device *b)
 	return 0;
 }
 
+static inline void dpm_for_each_dev(void *data, void (*fn)(struct device *, void *))
+{
+}
+
 #define pm_generic_prepare	NULL
 #define pm_generic_suspend	NULL
 #define pm_generic_resume	NULL