Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (147 commits)
  [SCSI] arcmsr: fix write to device check
  [SCSI] lpfc: lower stack use in lpfc_fc_frame_check
  [SCSI] eliminate an unnecessary local variable from scsi_remove_target()
  [SCSI] libiscsi: use bh locking instead of irq with session lock
  [SCSI] libiscsi: do not take host lock in queuecommand
  [SCSI] be2iscsi: fix null ptr when accessing task hdr
  [SCSI] be2iscsi: fix gfp use in alloc_pdu
  [SCSI] libiscsi: add more informative failure message during iscsi scsi eh
  [SCSI] gdth: Add missing call to gdth_ioctl_free
  [SCSI] bfa: remove unused defintions and misc cleanups
  [SCSI] bfa: remove inactive functions
  [SCSI] bfa: replace bfa_assert with WARN_ON
  [SCSI] qla2xxx: Use sg_next to fetch next sg element while walking sg list.
  [SCSI] qla2xxx: Fix to avoid recursive lock failure during BSG timeout.
  [SCSI] qla2xxx: Remove code to not reset ISP82xx on failure.
  [SCSI] qla2xxx: Display mailbox register 4 during 8012 AEN for ISP82XX parts.
  [SCSI] qla2xxx: Don't perform a BIG_HAMMER if Get-ID (0x20) mailbox command fails on CNAs.
  [SCSI] qla2xxx: Remove redundant module parameter permission bits
  [SCSI] qla2xxx: Add sysfs node for displaying board temperature.
  [SCSI] qla2xxx: Code cleanup to remove unwanted comments and code.
  ...

6 files changed, 46 insertions, 7 deletions

diff --git a/include/scsi/iscsi_if.h b/include/scsi/iscsi_if.h
index a8631acd37c..c3e1cbcc2ad 100644
--- a/include/scsi/iscsi_if.h
+++ b/include/scsi/iscsi_if.h
@@ -263,6 +263,7 @@ enum iscsi_err {
 	ISCSI_ERR_INVALID_HOST		= ISCSI_ERR_BASE + 18,
 	ISCSI_ERR_XMIT_FAILED		= ISCSI_ERR_BASE + 19,
 	ISCSI_ERR_TCP_CONN_CLOSE	= ISCSI_ERR_BASE + 20,
+	ISCSI_ERR_SCSI_EH_SESSION_RST	= ISCSI_ERR_BASE + 21,
 };
 
 /*
diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h
index 5c4c1678f7b..f53c8e31d5f 100644
--- a/include/scsi/libfc.h
+++ b/include/scsi/libfc.h
@@ -221,8 +221,8 @@ struct fc_rport_priv {
  * @InputRequests:         Number of input requests
  * @OutputRequests:        Number of output requests
  * @ControlRequests:       Number of control requests
- * @InputMegabytes:        Number of received megabytes
- * @OutputMegabytes:       Number of transmitted megabytes
+ * @InputBytes:            Number of received bytes
+ * @OutputBytes:           Number of transmitted bytes
  * @VLinkFailureCount:     Number of virtual link failures
  * @MissDiscAdvCount:      Number of missing FIP discovery advertisement
  */
@@ -241,8 +241,8 @@ struct fcoe_dev_stats {
 	u64		InputRequests;
 	u64		OutputRequests;
 	u64		ControlRequests;
-	u64		InputMegabytes;
-	u64		OutputMegabytes;
+	u64		InputBytes;
+	u64		OutputBytes;
 	u64		VLinkFailureCount;
 	u64		MissDiscAdvCount;
 };
@@ -263,7 +263,6 @@ struct fc_seq_els_data {
  * struct fc_fcp_pkt - FCP request structure (one for each scsi_cmnd request)
  * @lp:              The associated local port
  * @state:           The state of the I/O
- * @tgt_flags:       Target's flags
  * @ref_cnt:         Reference count
  * @scsi_pkt_lock:   Lock to protect the SCSI packet (must be taken before the
  *                   host_lock if both are to be held at the same time)
@@ -298,7 +297,6 @@ struct fc_fcp_pkt {
 	/* Housekeeping information */
 	struct fc_lport   *lp;
 	u16		  state;
-	u16		  tgt_flags;
 	atomic_t	  ref_cnt;
 	spinlock_t	  scsi_pkt_lock;
 
diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h
index 06f1b5a8ed1..feb6a94c90e 100644
--- a/include/scsi/libfcoe.h
+++ b/include/scsi/libfcoe.h
@@ -92,10 +92,12 @@ enum fip_state {
  * @timer_work:	   &work_struct for doing keep-alives and resets.
  * @recv_work:	   &work_struct for receiving FIP frames.
  * @fip_recv_list: list of received FIP frames.
+ * @flogi_req:	   clone of FLOGI request sent
  * @rnd_state:	   state for pseudo-random number generator.
  * @port_id:	   proposed or selected local-port ID.
  * @user_mfs:	   configured maximum FC frame size, including FC header.
  * @flogi_oxid:    exchange ID of most recent fabric login.
+ * @flogi_req_send: send of FLOGI requested
  * @flogi_count:   number of FLOGI attempts in AUTO mode.
  * @map_dest:	   use the FC_MAP mode for destination MAC addresses.
  * @spma:	   supports SPMA server-provided MACs mode
@@ -106,6 +108,7 @@ enum fip_state {
  * @update_mac:    LLD-supplied function to handle changes to MAC addresses.
  * @get_src_addr:  LLD-supplied function to supply a source MAC address.
  * @ctlr_mutex:	   lock protecting this structure.
+ * @ctlr_lock:     spinlock covering flogi_req
  *
  * This structure is used by all FCoE drivers.  It contains information
  * needed by all FCoE low-level drivers (LLDs) as well as internal state
@@ -126,12 +129,14 @@ struct fcoe_ctlr {
 	struct work_struct timer_work;
 	struct work_struct recv_work;
 	struct sk_buff_head fip_recv_list;
+	struct sk_buff *flogi_req;
 
 	struct rnd_state rnd_state;
 	u32 port_id;
 
 	u16 user_mfs;
 	u16 flogi_oxid;
+	u8 flogi_req_send;
 	u8 flogi_count;
 	u8 map_dest;
 	u8 spma;
@@ -143,6 +148,7 @@ struct fcoe_ctlr {
 	void (*update_mac)(struct fc_lport *, u8 *addr);
 	u8 * (*get_src_addr)(struct fc_lport *);
 	struct mutex ctlr_mutex;
+	spinlock_t ctlr_lock;
 };
 
 /**
@@ -155,6 +161,7 @@ struct fcoe_ctlr {
  * @fcf_mac:	 Ethernet address of the FCF
  * @vfid:	 virtual fabric ID
  * @pri:	 selection priority, smaller values are better
+ * @flogi_sent:	 current FLOGI sent to this FCF
  * @flags:	 flags received from advertisement
  * @fka_period:	 keep-alive period, in jiffies
  *
@@ -176,6 +183,7 @@ struct fcoe_fcf {
 	u8 fcf_mac[ETH_ALEN];
 
 	u8 pri;
+	u8 flogi_sent;
 	u16 flags;
 	u32 fka_period;
 	u8 fd_flags:1;
diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h
index b81d969ddc6..748382b32b5 100644
--- a/include/scsi/libiscsi.h
+++ b/include/scsi/libiscsi.h
@@ -89,6 +89,7 @@ enum {
 	ISCSI_TASK_RUNNING,
 	ISCSI_TASK_ABRT_TMF,		/* aborted due to TMF */
 	ISCSI_TASK_ABRT_SESS_RECOV,	/* aborted due to session recovery */
+	ISCSI_TASK_REQUEUE_SCSIQ,	/* qcmd requeueing to scsi-ml */
 };
 
 struct iscsi_r2t_info {
@@ -341,7 +342,7 @@ extern int iscsi_eh_abort(struct scsi_cmnd *sc);
 extern int iscsi_eh_recover_target(struct scsi_cmnd *sc);
 extern int iscsi_eh_session_reset(struct scsi_cmnd *sc);
 extern int iscsi_eh_device_reset(struct scsi_cmnd *sc);
-extern int iscsi_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *sc);
+extern int iscsi_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *sc);
 
 /*
  * iSCSI host helpers.
@@ -419,6 +420,7 @@ extern struct iscsi_task *iscsi_itt_to_ctask(struct iscsi_conn *, itt_t);
 extern struct iscsi_task *iscsi_itt_to_task(struct iscsi_conn *, itt_t);
 extern void iscsi_requeue_task(struct iscsi_task *task);
 extern void iscsi_put_task(struct iscsi_task *task);
+extern void __iscsi_put_task(struct iscsi_task *task);
 extern void __iscsi_get_task(struct iscsi_task *task);
 extern void iscsi_complete_scsi_task(struct iscsi_task *task,
 				     uint32_t exp_cmdsn, uint32_t max_cmdsn);
diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
index 90ce527ecf3..8f6bb9c7f3e 100644
--- a/include/scsi/libsas.h
+++ b/include/scsi/libsas.h
@@ -361,6 +361,8 @@ struct sas_ha_struct {
 	/* The class calls this to send a task for execution. */
 	int lldd_max_execute_num;
 	int lldd_queue_size;
+	int strict_wide_ports; /* both sas_addr and attached_sas_addr must match
+				* their siblings when forming wide ports */
 
 	/* LLDD calls these to notify the class of an event. */
 	void (*notify_ha_event)(struct sas_ha_struct *, enum ha_event);
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index 216af8538cc..1651fef1883 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -115,33 +115,61 @@ struct scsi_cmnd;
 #define PERSISTENT_RESERVE_OUT 0x5f
 #define VARIABLE_LENGTH_CMD   0x7f
 #define REPORT_LUNS           0xa0
+#define SECURITY_PROTOCOL_IN  0xa2
 #define MAINTENANCE_IN        0xa3
 #define MAINTENANCE_OUT       0xa4
 #define MOVE_MEDIUM           0xa5
 #define EXCHANGE_MEDIUM       0xa6
 #define READ_12               0xa8
 #define WRITE_12              0xaa
+#define READ_MEDIA_SERIAL_NUMBER 0xab
 #define WRITE_VERIFY_12       0xae
 #define VERIFY_12	      0xaf
 #define SEARCH_HIGH_12        0xb0
 #define SEARCH_EQUAL_12       0xb1
 #define SEARCH_LOW_12         0xb2
+#define SECURITY_PROTOCOL_OUT 0xb5
 #define READ_ELEMENT_STATUS   0xb8
 #define SEND_VOLUME_TAG       0xb6
 #define WRITE_LONG_2          0xea
+#define EXTENDED_COPY         0x83
+#define RECEIVE_COPY_RESULTS  0x84
+#define ACCESS_CONTROL_IN     0x86
+#define ACCESS_CONTROL_OUT    0x87
 #define READ_16               0x88
 #define WRITE_16              0x8a
+#define READ_ATTRIBUTE        0x8c
+#define WRITE_ATTRIBUTE	      0x8d
 #define VERIFY_16	      0x8f
 #define WRITE_SAME_16	      0x93
 #define SERVICE_ACTION_IN     0x9e
 /* values for service action in */
 #define	SAI_READ_CAPACITY_16  0x10
 #define SAI_GET_LBA_STATUS    0x12
+/* values for VARIABLE_LENGTH_CMD service action codes
+ * see spc4r17 Section D.3.5, table D.7 and D.8 */
+#define VLC_SA_RECEIVE_CREDENTIAL 0x1800
 /* values for maintenance in */
+#define MI_REPORT_IDENTIFYING_INFORMATION 0x05
 #define MI_REPORT_TARGET_PGS  0x0a
+#define MI_REPORT_ALIASES     0x0b
+#define MI_REPORT_SUPPORTED_OPERATION_CODES 0x0c
+#define MI_REPORT_SUPPORTED_TASK_MANAGEMENT_FUNCTIONS 0x0d
+#define MI_REPORT_PRIORITY   0x0e
+#define MI_REPORT_TIMESTAMP  0x0f
+#define MI_MANAGEMENT_PROTOCOL_IN 0x10
 /* values for maintenance out */
+#define MO_SET_IDENTIFYING_INFORMATION 0x06
 #define MO_SET_TARGET_PGS     0x0a
+#define MO_CHANGE_ALIASES     0x0b
+#define MO_SET_PRIORITY       0x0e
+#define MO_SET_TIMESTAMP      0x0f
+#define MO_MANAGEMENT_PROTOCOL_OUT 0x10
 /* values for variable length command */
+#define XDREAD_32	      0x03
+#define XDWRITE_32	      0x04
+#define XPWRITE_32	      0x06
+#define XDWRITEREAD_32	      0x07
 #define READ_32		      0x09
 #define VERIFY_32	      0x0a
 #define WRITE_32	      0x0b