Merge branch 'serial-from-alan'

* serial-from-alan: (79 commits)
  moxa: prevent opening unavailable ports
  imx: serial: use tty_encode_baud_rate to set true rate
  imx: serial: add IrDA support to serial driver
  imx: serial: use rational library function
  lib: isolate rational fractions helper function
  imx: serial: handle initialisation failure correctly
  imx: serial: be sure to stop xmit upon shutdown
  imx: serial: notify higher layers in case xmit IRQ was not called
  imx: serial: fix one bit field type
  imx: serial: fix whitespaces (no changes in functionality)
  tty: use prepare/finish_wait
  tty: remove sleep_on
  sierra: driver interface blacklisting
  sierra: driver urb handling improvements
  tty: resolve some sierra breakage
  timbuart: Fix the termios logic
  serial: Added Timberdale UART driver
  tty: Add URL for ttydev queue
  devpts: unregister the file system on error
  tty: Untangle termios and mm mutex dependencies
  ...

8 files changed, 134 insertions, 80 deletions

diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h
index 788850ba4e7..1fbdea4f08e 100644
--- a/include/linux/cyclades.h
+++ b/include/linux/cyclades.h
@@ -142,19 +142,6 @@ struct CYZ_BOOT_CTRL {
 
 
 #ifndef DP_WINDOW_SIZE
-/* #include "cyclomz.h" */
-/****************** ****************** *******************/
-/*
- *	The data types defined below are used in all ZFIRM interface
- *	data structures. They accomodate differences between HW
- *	architectures and compilers.
- */
-
-typedef __u64  ucdouble;		/* 64 bits, unsigned */
-typedef __u32  uclong;			/* 32 bits, unsigned */
-typedef __u16  ucshort;		/* 16 bits, unsigned */
-typedef __u8   ucchar;			/* 8 bits, unsigned */
-
 /*
  *	Memory Window Sizes
  */
@@ -507,16 +494,20 @@ struct ZFW_CTRL {
 
 /* Per card data structure */
 struct cyclades_card {
-    void __iomem *base_addr;
-    void __iomem *ctl_addr;
-    int irq;
-    unsigned int num_chips;	/* 0 if card absent, -1 if Z/PCI, else Y */
-    unsigned int first_line;	/* minor number of first channel on card */
-    unsigned int nports;	/* Number of ports in the card */
-    int bus_index;		/* address shift - 0 for ISA, 1 for PCI */
-    int intr_enabled;		/* FW Interrupt flag - 0 disabled, 1 enabled */
-    spinlock_t card_lock;
-    struct cyclades_port *ports;
+	void __iomem *base_addr;
+	union {
+		void __iomem *p9050;
+		struct RUNTIME_9060 __iomem *p9060;
+	} ctl_addr;
+	int irq;
+	unsigned int num_chips;	/* 0 if card absent, -1 if Z/PCI, else Y */
+	unsigned int first_line;	/* minor number of first channel on card */
+	unsigned int nports;	/* Number of ports in the card */
+	int bus_index;		/* address shift - 0 for ISA, 1 for PCI */
+	int intr_enabled;		/* FW Interrupt flag - 0 disabled, 1 enabled */
+	u32 hw_ver;
+	spinlock_t card_lock;
+	struct cyclades_port *ports;
 };
 
 /***************************************
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 0f71812d67d..d7d1c41a0b1 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1996,10 +1996,12 @@
 #define PCI_DEVICE_ID_OXSEMI_PCIe952_1_U	0xC118
 #define PCI_DEVICE_ID_OXSEMI_PCIe952_1_GU	0xC11C
 #define PCI_DEVICE_ID_OXSEMI_16PCI954	0x9501
+#define PCI_DEVICE_ID_OXSEMI_C950	0x950B
 #define PCI_DEVICE_ID_OXSEMI_16PCI95N	0x9511
 #define PCI_DEVICE_ID_OXSEMI_16PCI954PP	0x9513
 #define PCI_DEVICE_ID_OXSEMI_16PCI952	0x9521
 #define PCI_DEVICE_ID_OXSEMI_16PCI952PP	0x9523
+#define PCI_SUBDEVICE_ID_OXSEMI_C950	0x0001
 
 #define PCI_VENDOR_ID_CHELSIO		0x1425
 
diff --git a/include/linux/rational.h b/include/linux/rational.h
new file mode 100644
index 00000000000..4f532fcd9ee
--- /dev/null
+++ b/include/linux/rational.h
@@ -0,0 +1,19 @@
+/*
+ * rational fractions
+ *
+ * Copyright (C) 2009 emlix GmbH, Oskar Schirmer <os@emlix.com>
+ *
+ * helper functions when coping with rational numbers,
+ * e.g. when calculating optimum numerator/denominator pairs for
+ * pll configuration taking into account restricted register size
+ */
+
+#ifndef _LINUX_RATIONAL_H
+#define _LINUX_RATIONAL_H
+
+void rational_best_approximation(
+	unsigned long given_numerator, unsigned long given_denominator,
+	unsigned long max_numerator, unsigned long max_denominator,
+	unsigned long *best_numerator, unsigned long *best_denominator);
+
+#endif /* _LINUX_RATIONAL_H */
diff --git a/include/linux/serial.h b/include/linux/serial.h
index 9136cc5608c..e5bb75a6380 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -96,54 +96,76 @@ struct serial_uart_config {
 
 /*
  * Definitions for async_struct (and serial_struct) flags field
+ *
+ * Define ASYNCB_* for convenient use with {test,set,clear}_bit.
  */
-#define ASYNC_HUP_NOTIFY 0x0001 /* Notify getty on hangups and closes 
-				   on the callout port */
-#define ASYNC_FOURPORT  0x0002	/* Set OU1, OUT2 per AST Fourport settings */
-#define ASYNC_SAK	0x0004	/* Secure Attention Key (Orange book) */
-#define ASYNC_SPLIT_TERMIOS 0x0008 /* Separate termios for dialin/callout */
-
-#define ASYNC_SPD_MASK	0x1030
-#define ASYNC_SPD_HI	0x0010	/* Use 56000 instead of 38400 bps */
-
-#define ASYNC_SPD_VHI	0x0020  /* Use 115200 instead of 38400 bps */
-#define ASYNC_SPD_CUST	0x0030  /* Use user-specified divisor */
-
-#define ASYNC_SKIP_TEST	0x0040 /* Skip UART test during autoconfiguration */
-#define ASYNC_AUTO_IRQ  0x0080 /* Do automatic IRQ during autoconfiguration */
-#define ASYNC_SESSION_LOCKOUT 0x0100 /* Lock out cua opens based on session */
-#define ASYNC_PGRP_LOCKOUT    0x0200 /* Lock out cua opens based on pgrp */
-#define ASYNC_CALLOUT_NOHUP   0x0400 /* Don't do hangups for cua device */
-
-#define ASYNC_HARDPPS_CD	0x0800	/* Call hardpps when CD goes high  */
-
-#define ASYNC_SPD_SHI	0x1000	/* Use 230400 instead of 38400 bps */
-#define ASYNC_SPD_WARP	0x1010	/* Use 460800 instead of 38400 bps */
-
-#define ASYNC_LOW_LATENCY 0x2000 /* Request low latency behaviour */
-
-#define ASYNC_BUGGY_UART  0x4000 /* This is a buggy UART, skip some safety
-				  * checks.  Note: can be dangerous! */
-
-#define ASYNC_AUTOPROBE	 0x8000 /* Port was autoprobed by PCI or PNP code */
-
-#define ASYNC_FLAGS	0x7FFF	/* Possible legal async flags */
-#define ASYNC_USR_MASK	0x3430	/* Legal flags that non-privileged
-				 * users can set or reset */
-
-/* Internal flags used only by kernel/chr_drv/serial.c */
-#define ASYNC_INITIALIZED	0x80000000 /* Serial port was initialized */
-#define ASYNC_NORMAL_ACTIVE	0x20000000 /* Normal device is active */
-#define ASYNC_BOOT_AUTOCONF	0x10000000 /* Autoconfigure port on bootup */
-#define ASYNC_CLOSING		0x08000000 /* Serial port is closing */
-#define ASYNC_CTS_FLOW		0x04000000 /* Do CTS flow control */
-#define ASYNC_CHECK_CD		0x02000000 /* i.e., CLOCAL */
-#define ASYNC_SHARE_IRQ		0x01000000 /* for multifunction cards
-					     --- no longer used */
-#define ASYNC_CONS_FLOW		0x00800000 /* flow control for console  */
-
-#define ASYNC_BOOT_ONLYMCA	0x00400000 /* Probe only if MCA bus */
-#define ASYNC_INTERNAL_FLAGS	0xFFC00000 /* Internal flags */
+#define ASYNCB_HUP_NOTIFY	 0 /* Notify getty on hangups and closes
+				    * on the callout port */
+#define ASYNCB_FOURPORT		 1 /* Set OU1, OUT2 per AST Fourport settings */
+#define ASYNCB_SAK		 2 /* Secure Attention Key (Orange book) */
+#define ASYNCB_SPLIT_TERMIOS	 3 /* Separate termios for dialin/callout */
+#define ASYNCB_SPD_HI		 4 /* Use 56000 instead of 38400 bps */
+#define ASYNCB_SPD_VHI		 5 /* Use 115200 instead of 38400 bps */
+#define ASYNCB_SKIP_TEST	 6 /* Skip UART test during autoconfiguration */
+#define ASYNCB_AUTO_IRQ		 7 /* Do automatic IRQ during
+				    * autoconfiguration */
+#define ASYNCB_SESSION_LOCKOUT	 8 /* Lock out cua opens based on session */
+#define ASYNCB_PGRP_LOCKOUT	 9 /* Lock out cua opens based on pgrp */
+#define ASYNCB_CALLOUT_NOHUP	10 /* Don't do hangups for cua device */
+#define ASYNCB_HARDPPS_CD	11 /* Call hardpps when CD goes high  */
+#define ASYNCB_SPD_SHI		12 /* Use 230400 instead of 38400 bps */
+#define ASYNCB_LOW_LATENCY	13 /* Request low latency behaviour */
+#define ASYNCB_BUGGY_UART	14 /* This is a buggy UART, skip some safety
+				    * checks.  Note: can be dangerous! */
+#define ASYNCB_AUTOPROBE	15 /* Port was autoprobed by PCI or PNP code */
+#define ASYNCB_LAST_USER	15
+
+/* Internal flags used only by kernel */
+#define ASYNCB_INITIALIZED	31 /* Serial port was initialized */
+#define ASYNCB_NORMAL_ACTIVE	29 /* Normal device is active */
+#define ASYNCB_BOOT_AUTOCONF	28 /* Autoconfigure port on bootup */
+#define ASYNCB_CLOSING		27 /* Serial port is closing */
+#define ASYNCB_CTS_FLOW		26 /* Do CTS flow control */
+#define ASYNCB_CHECK_CD		25 /* i.e., CLOCAL */
+#define ASYNCB_SHARE_IRQ	24 /* for multifunction cards, no longer used */
+#define ASYNCB_CONS_FLOW	23 /* flow control for console  */
+#define ASYNCB_BOOT_ONLYMCA	22 /* Probe only if MCA bus */
+#define ASYNCB_FIRST_KERNEL	22
+
+#define ASYNC_HUP_NOTIFY	(1U << ASYNCB_HUP_NOTIFY)
+#define ASYNC_FOURPORT		(1U << ASYNCB_FOURPORT)
+#define ASYNC_SAK		(1U << ASYNCB_SAK)
+#define ASYNC_SPLIT_TERMIOS	(1U << ASYNCB_SPLIT_TERMIOS)
+#define ASYNC_SPD_HI		(1U << ASYNCB_SPD_HI)
+#define ASYNC_SPD_VHI		(1U << ASYNCB_SPD_VHI)
+#define ASYNC_SKIP_TEST		(1U << ASYNCB_SKIP_TEST)
+#define ASYNC_AUTO_IRQ		(1U << ASYNCB_AUTO_IRQ)
+#define ASYNC_SESSION_LOCKOUT	(1U << ASYNCB_SESSION_LOCKOUT)
+#define ASYNC_PGRP_LOCKOUT	(1U << ASYNCB_PGRP_LOCKOUT)
+#define ASYNC_CALLOUT_NOHUP	(1U << ASYNCB_CALLOUT_NOHUP)
+#define ASYNC_HARDPPS_CD	(1U << ASYNCB_HARDPPS_CD)
+#define ASYNC_SPD_SHI		(1U << ASYNCB_SPD_SHI)
+#define ASYNC_LOW_LATENCY	(1U << ASYNCB_LOW_LATENCY)
+#define ASYNC_BUGGY_UART	(1U << ASYNCB_BUGGY_UART)
+#define ASYNC_AUTOPROBE		(1U << ASYNCB_AUTOPROBE)
+
+#define ASYNC_FLAGS		((1U << ASYNCB_LAST_USER) - 1)
+#define ASYNC_USR_MASK		(ASYNC_SPD_HI|ASYNC_SPD_VHI| \
+		ASYNC_CALLOUT_NOHUP|ASYNC_SPD_SHI|ASYNC_LOW_LATENCY)
+#define ASYNC_SPD_CUST		(ASYNC_SPD_HI|ASYNC_SPD_VHI)
+#define ASYNC_SPD_WARP		(ASYNC_SPD_HI|ASYNC_SPD_SHI)
+#define ASYNC_SPD_MASK		(ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
+
+#define ASYNC_INITIALIZED	(1U << ASYNCB_INITIALIZED)
+#define ASYNC_NORMAL_ACTIVE	(1U << ASYNCB_NORMAL_ACTIVE)
+#define ASYNC_BOOT_AUTOCONF	(1U << ASYNCB_BOOT_AUTOCONF)
+#define ASYNC_CLOSING		(1U << ASYNCB_CLOSING)
+#define ASYNC_CTS_FLOW		(1U << ASYNCB_CTS_FLOW)
+#define ASYNC_CHECK_CD		(1U << ASYNCB_CHECK_CD)
+#define ASYNC_SHARE_IRQ		(1U << ASYNCB_SHARE_IRQ)
+#define ASYNC_CONS_FLOW		(1U << ASYNCB_CONS_FLOW)
+#define ASYNC_BOOT_ONLYMCA	(1U << ASYNCB_BOOT_ONLYMCA)
+#define ASYNC_INTERNAL_FLAGS	(~((1U << ASYNCB_FIRST_KERNEL) - 1))
 
 /*
  * Multiport serial configuration structure --- external structure
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 57a97e52e58..6fd80c4243f 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -41,7 +41,8 @@
 #define PORT_XSCALE	15
 #define PORT_RM9000	16	/* PMC-Sierra RM9xxx internal UART */
 #define PORT_OCTEON	17	/* Cavium OCTEON internal UART */
-#define PORT_MAX_8250	17	/* max port ID */
+#define PORT_AR7	18	/* Texas Instruments AR7 internal UART */
+#define PORT_MAX_8250	18	/* max port ID */
 
 /*
  * ARM specific type numbers.  These are not currently guaranteed
@@ -167,6 +168,9 @@
 /* MAX3100 */
 #define PORT_MAX3100    86
 
+/* Timberdale UART */
+#define PORT_TIMBUART	87
+
 #ifdef __KERNEL__
 
 #include <linux/compiler.h>
diff --git a/include/linux/tty.h b/include/linux/tty.h
index fc39db95499..1488d8c81aa 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -185,7 +185,7 @@ struct tty_port;
 struct tty_port_operations {
 	/* Return 1 if the carrier is raised */
 	int (*carrier_raised)(struct tty_port *port);
-	void (*raise_dtr_rts)(struct tty_port *port);
+	void (*dtr_rts)(struct tty_port *port, int raise);
 };
 	
 struct tty_port {
@@ -201,6 +201,9 @@ struct tty_port {
 	unsigned char		*xmit_buf;	/* Optional buffer */
 	int			close_delay;	/* Close port delay */
 	int			closing_wait;	/* Delay for output */
+	int			drain_delay;	/* Set to zero if no pure time
+						   based drain is needed else
+						   set to size of fifo */
 };
 
 /*
@@ -223,8 +226,11 @@ struct tty_struct {
 	struct tty_driver *driver;
 	const struct tty_operations *ops;
 	int index;
-	/* The ldisc objects are protected by tty_ldisc_lock at the moment */
-	struct tty_ldisc ldisc;
+
+	/* Protects ldisc changes: Lock tty not pty */
+	struct mutex ldisc_mutex;
+	struct tty_ldisc *ldisc;
+
 	struct mutex termios_mutex;
 	spinlock_t ctrl_lock;
 	/* Termios values are protected by the termios mutex */
@@ -311,6 +317,7 @@ struct tty_struct {
 #define TTY_CLOSING 		7	/* ->close() in progress */
 #define TTY_LDISC 		9	/* Line discipline attached */
 #define TTY_LDISC_CHANGING 	10	/* Line discipline changing */
+#define TTY_LDISC_OPEN	 	11	/* Line discipline is open */
 #define TTY_HW_COOK_OUT 	14	/* Hardware can do output cooking */
 #define TTY_HW_COOK_IN 		15	/* Hardware can do input cooking */
 #define TTY_PTY_LOCK 		16	/* pty private */
@@ -403,6 +410,7 @@ extern int tty_termios_hw_change(struct ktermios *a, struct ktermios *b);
 extern struct tty_ldisc *tty_ldisc_ref(struct tty_struct *);
 extern void tty_ldisc_deref(struct tty_ldisc *);
 extern struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *);
+extern void tty_ldisc_hangup(struct tty_struct *tty);
 extern const struct file_operations tty_ldiscs_proc_fops;
 
 extern void tty_wakeup(struct tty_struct *tty);
@@ -425,6 +433,9 @@ extern struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx,
 extern void tty_release_dev(struct file *filp);
 extern int tty_init_termios(struct tty_struct *tty);
 
+extern struct tty_struct *tty_pair_get_tty(struct tty_struct *tty);
+extern struct tty_struct *tty_pair_get_pty(struct tty_struct *tty);
+
 extern struct mutex tty_mutex;
 
 extern void tty_write_unlock(struct tty_struct *tty);
@@ -438,6 +449,7 @@ extern struct tty_struct *tty_port_tty_get(struct tty_port *port);
 extern void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty);
 extern int tty_port_carrier_raised(struct tty_port *port);
 extern void tty_port_raise_dtr_rts(struct tty_port *port);
+extern void tty_port_lower_dtr_rts(struct tty_port *port);
 extern void tty_port_hangup(struct tty_port *port);
 extern int tty_port_block_til_ready(struct tty_port *port,
 				struct tty_struct *tty, struct file *filp);
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index bcba84ea2d8..3566129384a 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -127,7 +127,8 @@
  * 	the line discipline are close to full, and it should somehow
  * 	signal that no more characters should be sent to the tty.
  *
- *	Optional: Always invoke via tty_throttle();
+ *	Optional: Always invoke via tty_throttle(), called under the
+ *	termios lock.
  * 
  * void (*unthrottle)(struct tty_struct * tty);
  *
@@ -135,7 +136,8 @@
  * 	that characters can now be sent to the tty without fear of
  * 	overrunning the input buffers of the line disciplines.
  * 
- *	Optional: Always invoke via tty_unthrottle();
+ *	Optional: Always invoke via tty_unthrottle(), called under the
+ *	termios lock.
  *
  * void (*stop)(struct tty_struct *tty);
  *
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 625e9e4639c..8cdfed738fe 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -224,8 +224,7 @@ struct usb_serial_driver {
 	/* Called by console with tty = NULL and by tty */
 	int  (*open)(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
-	void (*close)(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+	void (*close)(struct usb_serial_port *port);
 	int  (*write)(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *buf, int count);
 	/* Called only by the tty layer */
@@ -241,6 +240,10 @@ struct usb_serial_driver {
 	int  (*tiocmget)(struct tty_struct *tty, struct file *file);
 	int  (*tiocmset)(struct tty_struct *tty, struct file *file,
 			 unsigned int set, unsigned int clear);
+	/* Called by the tty layer for port level work. There may or may not
+	   be an attached tty at this point */
+	void (*dtr_rts)(struct usb_serial_port *port, int on);
+	int  (*carrier_raised)(struct usb_serial_port *port);
 	/* USB events */
 	void (*read_int_callback)(struct urb *urb);
 	void (*write_int_callback)(struct urb *urb);
@@ -283,8 +286,7 @@ extern int usb_serial_generic_open(struct tty_struct *tty,
 		struct usb_serial_port *port, struct file *filp);
 extern int usb_serial_generic_write(struct tty_struct *tty,
 	struct usb_serial_port *port, const unsigned char *buf, int count);
-extern void usb_serial_generic_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+extern void usb_serial_generic_close(struct usb_serial_port *port);
 extern int usb_serial_generic_resume(struct usb_serial *serial);
 extern int usb_serial_generic_write_room(struct tty_struct *tty);
 extern int usb_serial_generic_chars_in_buffer(struct tty_struct *tty);